The tcp_only_iterative_resolution, tcp_fallback_resolves_when_udp_blocked,
tcp_fallback_handles_nxdomain, and udp_auto_disable_resets tests all mutate
global UDP_DISABLED / UDP_FAILURES atomics. Under cargo test parallelism,
udp_auto_disable_resets would reset the flag mid-flight causing other tests
to attempt UDP against TCP-only mock servers and time out.
Fix: static Mutex serializes tests that depend on global UDP state.
Also: tcp_only_iterative_resolution now calls forward_tcp directly,
removing its dependence on the flag entirely.
- Remove forward_with_failover (parsed): warm_domain now uses _raw + insert_wire
- forward_udp delegates to forward_udp_raw (single UDP socket implementation)
- forward_query uses unified _raw path for all protocols
- Fix send_query_hedged warm branch: bare select! dropped secondary on primary
error instead of waiting for it — now drains both futures like the cold branch
- Remove pointless raw_len = len rename
Wire-level forwarding path skips DnsPacket parse/serialize on the hot
path. Cache stores raw wire bytes with pre-scanned TTL offsets — patches
ID + TTLs in-place on lookup instead of cloning parsed packets.
Request hedging (Dean & Barroso "Tail at Scale") fires a second
parallel request after a configurable delay (default 10ms) when
the primary upstream stalls. DoH keepalive loop prevents idle
HTTP/2 + TLS connection teardown.
Recursive resolver now hedges across multiple NS addresses and
caches NS delegation records to skip TLD re-queries.
Integration test harness polls /blocking/stats instead of fixed
sleep, eliminating the blocklist-download race condition.
Adds tls:// upstream support for forwarding queries over DNS-over-TLS
(RFC 7858). Parses tls://IP:PORT#hostname format, with default port 853.
- New Upstream::Dot variant with TLS connector
- forward_dot: length-prefixed DNS over TLS stream
- build_dot_connector: system root CAs via webpki-roots
- parse_upstream handles tls:// prefix
Example config:
address = ["tls://9.9.9.9#dns.quad9.net"]
* feat: per-suffix conditional forwarding rules in numa.toml (#82)
Adds a `[[forwarding]]` config section so users can explicitly route
domain suffixes to specific upstreams. Config-declared rules take
precedence over auto-discovered rules (macOS scutil, Linux search
domains) via first-match semantics.
Example — the reporter's reverse-DNS case:
[[forwarding]]
suffix = "168.192.in-addr.arpa"
upstream = "100.90.1.63:5361"
Bare IPs default to port 53. IPv6 is supported via
parse_upstream_addr. ForwardingRule::new() constructor replaces
direct struct-literal construction, and make_rule() now delegates
to parse_upstream_addr to fix a latent IPv6 parsing bug.
* feat: accept suffix as string or array in [[forwarding]] rules
Reuses existing string_or_vec deserializer so users can write:
suffix = ["168.192.in-addr.arpa", "onsite"]
instead of repeating [[forwarding]] blocks per suffix.
* style: rustfmt
* refactor: drop config_count from merge_forwarding_rules return
Log config rules directly from config.forwarding before merging,
keeping the merge API clean of logging concerns.
Port-53 and TLS-data-dir advisories told users to create
~/.config/numa/numa.toml, but config_dir() routed root to
/var/lib/numa/ and load_config never consulted the XDG path, so
the file the user created was silently ignored.
New suggested_config_path() helper prefers $HOME/.config/numa/
when HOME is set (and isn't "/" or empty), with config_dir() as
lazy fallback. Used by both advisories and by load_config as an
additional candidate, so the advised path is the path numa
actually reads. Runtime state (services.json, TLS CA) stays in
FHS — config_dir()/data_dir() are intentionally unchanged to
keep continuity with the installed daemon.
End-to-end replication + regression check in
tests/docker/issue-81.sh: four scenarios (replication and
existing-install, each against main and fix), all matching
expectations.
The Unicode block-character QR code in the DoT blog post can't be
scanned by phone cameras due to HTML font metrics distorting the grid.
Replace with a bordered placeholder box — the dashboard screenshot
already shows a working QR.
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* chore: document multi-forwarder and cache warming in config and README
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: DNS-over-HTTPS server endpoint (RFC 8484)
Serve DoH at POST /dns-query on the existing HTTPS proxy (port 443).
Automatically enabled when proxy TLS is active — no config needed.
Also fix zone map priority so local zones override RFC 6762 .local
special-use handling.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* style: cargo fmt
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* chore: remove GoatCounter analytics from site
GoatCounter domains (goatcounter.com, gc.zgo.at) are blocked by
Hagezi Pro, which is Numa's default blocklist. A DNS privacy tool
should not embed analytics that its own resolver blocks.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: enable DoT listener by default
DoT now starts automatically with `sudo numa`, matching the proxy and
DoH which are already on by default. The self-signed CA infrastructure
is shared with the proxy, so there is no additional setup. This makes
`numa setup-phone` work out of the box.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Resolves A + AAAA at startup for domains listed in [cache] warm,
then re-resolves before TTL expiry (at 75% elapsed). Keeps critical
domains always hot in cache with zero client-visible latency.
Closes#34 (item 4)
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* feat: multi-forwarder with SRTT-based failover
address accepts string or array, with optional per-server port override.
New fallback pool tried only when all primaries fail. Sequential failover
with SRTT ranking ensures fastest upstream is tried first.
Closes#34 (items 1, 2, 3)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* refactor: simplify failover candidate list and deduplicate recursive pool
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: extract maybe_update_primary for testable upstream re-detection
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* style: rustfmt
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
apt-get install pandoc took ~27 minutes due to apt index refresh.
The prebuilt binary action completes in seconds.
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: scope mobileconfig DNS to Wi-Fi only via OnDemandRules
Without OnDemandRules, iOS applies the DoT profile globally —
cellular DNS breaks when the phone leaves the LAN.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat: phone setup QR code in dashboard header
- Add /qr endpoint serving SVG (uses existing qrcode crate, svg feature)
- Header popover: QR on desktop, direct download link on mobile viewports
- Only visible when [mobile] enabled = true in config
- Expose mobile.enabled and mobile.port in /stats response
- Lazy-load QR on first click, dismiss on outside click
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: add Cache-Control to /qr, re-fetch QR on each popover open
Cache-Control: no-store prevents stale QR after LAN IP change.
Remove qrLoaded flag so the QR always reflects the current IP.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* style: rustfmt serve_qr response tuple
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: add iOS install steps to phone setup popover
iOS shows "Profile Downloaded" with no guidance. The popover
now includes the 3-step install flow including the buried
Certificate Trust Settings toggle.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: allowlist parent domain unblocks subdomains in blocklist
The allowlist walk-up was interleaved with the blocklist walk-up,
so an exact blocklist match on www.example.com short-circuited
before reaching example.com in the allowlist. Now allowlist is
checked at all parent levels before consulting the blocklist.
Deduplicate is_blocked/check via find_in_set helper; is_blocked
delegates to check. Adds 7 new blocklist tests.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* style: rustfmt blocklist tests
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* perf: zero-alloc is_blocked hot path, normalize trailing dots
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* style: rustfmt add_to_allowlist
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: extract normalize() for domain lowering + dot stripping
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* chore: GoatCounter analytics, README for v0.11.0, DoT blog post
- Add GoatCounter script to site pages (cookie-free, no consent needed)
- Update README: setup-phone section, DoT blog link, roadmap checkbox
- Add DoT blog post source and SVG assets
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* chore: site navbar, updated roadmap, DoT blog listing, spec updates
- Add top nav bar to landing page (wordmark + links, responsive)
- Add DoT blog post entry to blog index
- Update roadmap: phases 8-13 (hostile-network, Windows, DoT shipped)
- Update specs: listeners section, dependency description, port list
- Blog: hostile-network SVG in DNSSEC post, text-transform fix
- Blog template: wordmark text-transform fix
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat: numa setup-phone — QR-based mobile DoT onboarding
Adds a CLI subcommand that generates a one-time mobileconfig profile
containing both the Numa local CA (as a com.apple.security.root payload)
and the DoT DNS settings, then serves it via a temporary HTTP server
and prints a scannable QR code in the terminal.
Flow:
1. User runs `numa setup-phone` (no sudo needed)
2. Detects current LAN IP, reads CA from /usr/local/var/numa/ca.pem
3. Builds combined mobileconfig (CA trust + DoT)
4. Renders QR code with qrcode crate (Unicode block characters)
5. Serves the profile on port 8765, stays open until Ctrl+C
6. Counts successful downloads (multi-device households)
Important caveat documented in instructions: even with the CA bundled
in the profile, iOS still requires the user to manually enable trust
in Settings → General → About → Certificate Trust Settings. Verified
on a real iPhone.
Stable PayloadIdentifiers/UUIDs ensure re-running replaces the
existing profile on iOS rather than accumulating duplicates.
- New module: src/setup_phone.rs (~270 lines)
- New CLI subcommand: `numa setup-phone`
- New dependency: qrcode = "0.14" (default-features = false)
- tokio "signal" feature added for Ctrl+C handling
- 3 unit tests: PEM stripping, mobileconfig generation, QR rendering
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat: mobile API, enriched /health, mobileconfig module
Adds a persistent read-only HTTP listener (default port 8765, LAN-bound)
serving a dedicated subset of Numa's API for iOS/Android companion apps
and as a replacement for the one-shot server setup_phone used to spin up:
GET /health — enriched JSON with version, hostname, LAN IP,
SNI, DoT config, mobile API port, CA
fingerprint, features (shared handler with
the main API on port 5380)
GET /ca.pem — public CA certificate (shared handler)
GET /mobileconfig — full iOS profile (CA trust + DNS settings
pinned to current LAN IP)
GET /ca.mobileconfig — CA-only iOS profile (trust anchor without
DNS override — for the iOS companion app's
programmatic DNS flow via NEDNSSettingsManager)
All routes are idempotent GETs. The mobile API never serves the
state-mutating routes that live on the main API (overrides, blocking
toggle, service CRUD, cache flush), so it is safe to expose on the LAN
regardless of the main API's bind address. The CA private key is never
served by any route.
Opt-in via `[mobile] enabled = true`. Default is false so new installs
do not silently expose a LAN listener after upgrading; our committed
numa.toml template enables it explicitly for spike testing.
New modules:
- src/mobileconfig.rs — ProfileMode::{Full, CaOnly} enum with plist
builder lifted from setup_phone.rs. Full and CaOnly share the CA
payload UUID (same trust anchor) but have distinct top-level UUIDs
so they coexist as separate installable profiles on iOS.
- src/health.rs — HealthMeta cached metadata built once at startup
from config + CA fingerprint (SHA-256 of the PEM via ring), and the
HealthResponse JSON shape shared between the main and mobile APIs.
- src/mobile_api.rs — axum Router for the persistent listener. Reuses
api::health and api::serve_ca from the main API; owns the two
mobileconfig handlers.
Modified:
- src/api.rs — health() returns the enriched HealthResponse, now pub.
serve_ca is now pub so mobile_api can reuse it.
- src/config.rs — MobileConfig section (enabled, port, bind_addr).
- src/ctx.rs — health_meta: HealthMeta field on ServerCtx.
- src/main.rs — builds HealthMeta at startup, spawns mobile API
listener if enabled.
- src/lan.rs — build_announcement takes &HealthMeta and writes
enriched TXT records (version, api_port, proto, dot_port, ca_fp).
SRV port now reports the mobile API port; peer discovery still
reads TXT `services=` so this is backwards compatible. Always
announces even when no .numa services are registered, so the iOS
companion app can discover Numa via mDNS regardless of service
state.
- src/setup_phone.rs — reduced from 267 to 100 lines. The CLI is now
a thin QR wrapper over the persistent /mobileconfig endpoint; the
hand-rolled one-shot HTTP server (accept_loop, RUST_OK_HEADERS,
RUST_NOT_FOUND, download counter) is gone.
- src/dot.rs — test fixture updated with HealthMeta::test_fixture().
- numa.toml — commented [mobile] section, enabled = true for spike.
Tests: 136 unit tests passing (5 new in mobileconfig, 3 new in health).
cargo clippy clean. Integration sanity check: curl'd /health, /ca.pem,
/mobileconfig, /ca.mobileconfig against a running numa — all return
200 with correct content types and valid response bodies.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: setup-phone probe, unknown command error, query source in dashboard
- setup-phone now probes the mobile API before printing the QR code
and shows an actionable error if [mobile] is not enabled
- Unknown CLI subcommands print an error instead of silently
attempting to start a full server
- Dashboard query log shows source IP under timestamp (localhost
for loopback, full IP for LAN devices) with full addr on hover
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: escape dots and special characters in DNS label text per RFC 1035 §5.1
Closes#36
read_qname was pushing raw label bytes directly into the output string,
producing ambiguous text for labels containing dots, backslashes, or
non-printable bytes. fanf2 spotted this on HN: wire format
`[8]exa.mple[3]com[0]` (two labels, first containing a literal 0x2E)
was rendered as `exa.mple.com`, indistinguishable from three labels.
Fix both sides of the text representation per RFC 1035 §5.1:
read_qname — when rendering wire bytes to text:
- literal `.` within a label → `\.`
- literal `\` → `\\`
- bytes outside 0x21..=0x7E → `\DDD` (3-digit decimal)
- printable ASCII passes through unchanged
write_qname — when parsing text back to wire:
- `\.` produces a literal 0x2E inside the current label (not a separator)
- `\\` produces a literal 0x5C
- `\DDD` produces the byte with that decimal value (0..=255)
- unescaped `.` still separates labels, empty labels still skipped
- rejects trailing `\`, short `\DD`, and `\DDD` > 255
Impact in practice is low — real-world domains don't contain dots in
labels — but it's a correctness bug in the wire format parser that
could cause round-trip failures with adversarial input. The parser is
the core of the project, so correctness bugs take priority over
practical impact.
Adds 16 unit tests in a new `#[cfg(test)] mod tests` block covering:
plain domain read/write, literal-dot escaping on both sides, backslash
escaping, non-printable + space decimal escapes, full round-trip
preservation, and the three rejection cases for malformed escapes.
Credit: fanf2 (https://news.ycombinator.com/item?id=47612321)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* refactor: stream label writes directly into buffer (review feedback)
The first cut of this fix delegated write_qname to a helper
(parse_escaped_labels) that built Vec<Vec<u8>> up-front, then iterated
to emit the wire bytes. On a plain-ASCII domain like "www.google.com"
that's ~4 heap allocations per write_qname call, and record.rs calls
write_qname ~6 times per response — so this PR would regress
bench_buffer_serialize by roughly 24 extra allocations per response
vs. main, where the old non-escaping code had zero.
Rewrite write_qname as a streaming byte-level loop that reserves the
length byte up-front, writes the label body directly into the buffer,
then backpatches the length via set(). Zero intermediate allocations
on the common path, and the 63-byte label cap is now checked
incrementally so oversized labels fail fast.
Byte-level scanning is safe for UTF-8 input: continuation bytes are
always in 0x80..=0xBF, so they can never collide with the ASCII `.`
(0x2E) or `\` (0x5C) that drive label splitting and escape parsing.
Also inline the \DDD rendering in read_qname to avoid the per-byte
format!() allocation on non-printable input. Plain-ASCII reads hit
the unchanged push(c as char) fast path, so the common case has zero
regression.
The parse_escaped_labels helper is deleted — no remaining callers.
All 158 tests pass, clippy + fmt clean. Collapses three review
findings (HIGH allocation regression, MEDIUM format! allocation,
MEDIUM .unwrap() after digit guard) in one pass.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: route dnssec::name_to_wire through write_qname for escape handling
Closes#55.
dnssec::name_to_wire was a parallel implementation of the old
write_qname's splitting loop — it iterated qname.split('.') and pushed
raw bytes. It predated and duplicated the buffer.rs logic, and it did
not understand RFC 1035 §5.1 text escapes. After the read_qname fix in
this PR, names that come out of read_qname can contain \., \\, or
\DDD sequences; feeding those back into the old name_to_wire would
split on the literal '.' inside a \. sequence and produce corrupt
RRSIG signed-data blobs.
The underlying bug predates this PR — the old read_qname was broken
too, so both sides of the DNSSEC canonical form pipeline were
silently wrong in the same way. Making read_qname correct exposed the
divergence, so it's fixed here in the same PR that introduced the
exposure.
Reimplement name_to_wire on top of BytePacketBuffer::write_qname:
reserve a scratch buffer, let write_qname handle the escape parsing
and length-byte framing, copy the emitted bytes into a Vec, then
walk the wire once more to lowercase label bodies (length bytes stay
untouched). Canonical form per RFC 4034 §6.2 requires the
lowercasing, and it has to happen post-escape-resolution — a
decimal escape like \065 produces 0x41 ('A'), which must be
lowercased to 'a' in the final wire bytes.
Call sites in build_signed_data, record_to_canonical_wire,
record_rdata_canonical, and nsec3_hash are unchanged — the public
signature stays the same, infallible Vec<u8> return.
Tests:
- name_to_wire_escaped_dot_in_label_is_not_a_separator — verifies
the fanf2 example round-trips correctly through canonical form
- name_to_wire_decimal_escape_is_lowercased — verifies post-escape
lowercasing (the subtle correctness requirement)
- existing name_to_wire_root, name_to_wire_domain, ds_verification
tests still pass unchanged
Test count: 158 → 160.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* refactor: tighten name_to_wire per review feedback
- Replace hand-rolled per-byte lowercase loop with stdlib
[u8]::make_ascii_lowercase(). Shorter and idiomatic.
- Tighten the .expect() message to state the actual invariant
(parseable DNS name) instead of vague "well-formed" language.
- Replace the doc comment's "see #55" with the real invariant —
issue numbers rot, and by merge time #55 is closed anyway. The
comment now explains WHY the lowercase pass has to happen
post-escape-resolution (\065 → 'A' → 'a') instead of during
write_qname.
- Drop the redundant `\065` test comment (the one-liner version
is enough with the assertion showing the transform).
No behavior change; 160 tests still pass, clippy + fmt clean.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* test: cover label cap and empty-label rollback; trim doc comments
Closes coverage gaps left by PR #54:
- write_rejects_label_over_63_bytes: pins the incremental 63-byte cap
inside write_qname's inner loop (boundary at 63 vs 64).
- write_skips_empty_labels: pins the rollback branch (pos = len_pos)
triggered by leading or consecutive dots.
Doc comments tightened:
- write_qname: drop the streaming-impl walkthrough and the escape-grammar
restatement (already documented on read_qname).
- name_to_wire: drop the implementation explanation; keep the
post-escape lowercasing rationale, which pins behavior a future
refactor could silently break.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
`sudo numa install` unconditionally printed the "Want full DNS
sovereignty?" hint even when numa.toml already has mode = "recursive".
Now loads the config first and skips the message if recursive is
already set.
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
rcgen 0.14 replaced the separate Certificate + KeyPair args with a
unified Issuer type. Migrates ensure_ca and generate_service_cert:
- Load path: Issuer::from_ca_cert_der replaces the old
CertificateParams::from_ca_cert_pem + self_signed round-trip.
- Generate path: Issuer::new(params, key_pair) constructs directly
from the params used for self_signed (no DER re-parse).
- signed_by takes (&key_pair, &issuer) instead of (&key_pair, &cert, &key).
Also drops thiserror v1 from the dep tree (rcgen 0.14 uses v2).
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
The combination of `prefix: "chore(deps)"` and `include: "scope"`
produced `chore(deps)(deps):` — double scope. Removing `include`
keeps the prefix as-is.
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* Add GitHub Dependabot scanning (runs once a month)
* chore: group dependabot updates and use conventional commit prefix
Bundle all minor/patch bumps per ecosystem into a single PR to keep
noise manageable (~3 PRs/month instead of 10+). Major bumps still
get individual PRs since they may break APIs.
Commit messages now use the `chore(deps)` conventional-commit prefix
to match the repo's existing style.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Razvan Dimescu <ssaricu@gmail.com>
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Reverts PR #44's approach of swapping GITHUB_TOKEN for a PAT on
action-gh-release. That approach worked in principle but failed in
practice during the v0.10.2 cut: HOMEBREW_TAP_GITHUB_TOKEN is a
fine-grained PAT scoped only to razvandimescu/homebrew-tap, so when
action-gh-release tried to create a release on razvandimescu/numa it
got 403 Resource not accessible. v0.10.2 had to be recovered manually
via `gh release create` from a user PAT.
Root cause of the original bug (from #44): GitHub Actions deliberately
does not propagate workflow events triggered by GITHUB_TOKEN, so a
release created by GITHUB_TOKEN silently failed to fire homebrew-bump's
`release: published` trigger.
Fix: sidestep the event-propagation rule entirely by invoking
homebrew-bump.yml directly as a reusable workflow via `workflow_call`.
- release.yml: drop the `token:` override on action-gh-release (reverts
to GITHUB_TOKEN default, which v0.10.0 and v0.10.1 used successfully)
and add a new `bump-homebrew` job that `needs: release` and `uses:`
homebrew-bump.yml with `secrets: inherit`.
- homebrew-bump.yml: add `workflow_call` trigger with a `version` input,
remove the `release: published` trigger (no longer needed), keep
`workflow_dispatch` for manual recovery, and collapse the version
determination step to a single `inputs.version` read.
Each token now does exactly what its scope permits:
- GITHUB_TOKEN creates the release on numa (contents: write, default)
- HOMEBREW_TAP_GITHUB_TOKEN pushes to homebrew-tap (unchanged)
The tap update becomes a child job in the release run, so failures are
visible in one place instead of "why didn't the release event fire?"
mysteries.
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
On modern Arch / Ubuntu 22.04+ / Fedora desktops, NetworkManager +
systemd-resolved symlink /etc/resolv.conf to stub-resolv.conf, which
contains only:
nameserver 127.0.0.53
The real upstream servers (router, ISP, configured DoT providers) live
inside systemd-resolved's per-link state, exposed via 'resolvectl status'.
discover_linux() was parsing /etc/resolv.conf, correctly filtering the
stub address, and then falling through to the Quad9 DoH fallback because
detect_dhcp_dns() is macOS-only on Linux. Net effect: on a large chunk of
Linux installs, numa silently defaulted to Quad9 instead of the user's
actual DNS — visible in Casey's AUR test banner (#33) as
'Upstream https://9.9.9.9/dns-query' despite his machine having working
router DNS the entire time.
resolvectl_dns_server() already exists — it was introduced for cloud VPC
forwarding-rule discovery and knows how to ask systemd-resolved for the
real active DNS server. This commit wires it into the default-upstream
fallback chain, between the primary resolv.conf parse and the
~/.numa/original-resolv.conf backup.
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Follow-up to #49 and #50. With ownership and quoting fixed, the next run
([24199871832](https://github.com/razvandimescu/numa/actions/runs/24199871832))
reached makepkg and failed with:
/pkg/PKGBUILD: line 34: cargo: command not found
==> ERROR: A failure occurred in prepare().
The publish job only installs 'binutils git sudo' since its sole purpose
is to regenerate .SRCINFO. 'makepkg -od' still runs prepare(), which
calls cargo. The sibling validate job avoids this by passing --noprepare
(and installs rust anyway).
Mirror that pattern: add --noprepare to the metadata-generation invocation.
pkgver() runs before prepare() in makepkg's pipeline, so .SRCINFO still
captures the computed version. Keeps the container minimal (no rust toolchain).
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The docker block runs as '/bin/bash -c "<multi-line script>"'. A comment
inside the script contained embedded double quotes:
# "makepkg -od" fetches the source first so pkgver() can calculate the version.
The first embedded '"' prematurely closes the outer string. Bash then
parses the remainder into a second argument to 'bash -c' which becomes
$0 inside the container and is silently discarded. Net effect: the
in-container script stops at 'git config --add safe.directory', neither
'makepkg -od' nor 'makepkg --printsrcinfo > .SRCINFO' ever run, and the
host-side 'git add PKGBUILD .SRCINFO' fails with:
fatal: pathspec '.SRCINFO' did not match any files
This bug was masked by the earlier ownership bug fixed in #49 — once
that permission error was removed, this one surfaced.
Fix: drop the embedded double quotes from the comment.
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The 'Push to AUR' step failed on run 24195384571 with:
error: could not lock config file .git/config: Permission denied
Inside the docker block we 'chown -R builduser:builduser /pkg', which
propagates through the bind mount and transfers ownership of aur-repo/
(including .git/) to the container's builduser UID. When control returns
to the runner user, 'git config user.name' can no longer write .git/config
and the step exits 255.
Chown the directory back to the runner's UID/GID before resuming host-side
git operations.
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
