OTP Serial number is too long #135
Reference in New Issue
Block a user
Delete Branch "%!s()"
Deleting a branch is permanent. Although the deleted branch may continue to exist for a short time before it actually gets removed, it CANNOT be undone in most cases. Continue?
I bought a development board, and after flashing, the S/N was greater than 9 digits, and then after uploading the file, this prompt appeared.
Although I can delete one digit manually, I don't know if this will cause an exception
I don’t understand what are you trying to.
I apologize for the lack of clarity in my previous statement.
Nightly Development Firmware: pico_fido_waveshare_rp2350_one-6.4.uf2
Upon flashing, the serial number (S/N) will be displayed.
When selecting "Short" under "Slots" in the Yubico Authenticator and generating the Yubico OTP file, the serial number displays as "Serial number is too long" upon uploading to Yubico OTP key upload.
The file upload function supports 10-digit serial numbers, but some devices currently have 11-digit serial numbers.
I have the same problem on other softwares with one have integration Yubikey
Software waiting max 9 digits serial NR.
But some Pico2 when install Pico-Fido have 10 digit serial.
It is possible when flash set firmware to set serial 9 digits !?
Why is important to upload the S/N? You can put there any value you consider, it will work anyway.