Files

ruv 7872987ee6 fix(docker): Update Dockerfile paths from src/ to v1/src/

The source code was moved to v1/src/ but the Dockerfile still
referenced src/ directly, causing build failures. Updated all
COPY paths, uvicorn module paths, test paths, and bandit scan
paths. Also added missing v1/__init__.py for Python module
resolution.

Fixes #33

Co-Authored-By: claude-flow <ruv@ruv.net>

2026-02-28 13:38:21 -05:00

main

fix(docker): Update Dockerfile paths from src/ to v1/src/

2026-02-28 13:38:21 -05:00

CMakeLists.txt

feat(adr-018): ESP32-S3 firmware, Rust aggregator, and live CSI pipeline

2026-02-28 13:22:04 -05:00

README.md

feat(adr-018): ESP32-S3 firmware, Rust aggregator, and live CSI pipeline

2026-02-28 13:22:04 -05:00

README.md

ESP32-S3 CSI Node Firmware (ADR-018)

Firmware for ESP32-S3 that collects WiFi Channel State Information (CSI) and streams it as ADR-018 binary frames over UDP to the aggregator.

Verified working with ESP32-S3-DevKitC-1 (CP2102, MAC 3C:0F:02:EC:C2:28) streaming ~20 Hz CSI to the Rust aggregator binary.

Prerequisites

Component	Version	Purpose
Docker Desktop	28.x+	Cross-compile ESP-IDF firmware
esptool	5.x+	Flash firmware to ESP32
ESP32-S3 board	-	Hardware (DevKitC-1 or similar)
USB-UART driver	CP210x	Silicon Labs driver for serial

Quick Start

Step 1: Configure WiFi credentials

Create sdkconfig.defaults in this directory (it is gitignored):

CONFIG_IDF_TARGET="esp32s3"
CONFIG_ESP_WIFI_CSI_ENABLED=y
CONFIG_CSI_NODE_ID=1
CONFIG_CSI_WIFI_SSID="YOUR_WIFI_SSID"
CONFIG_CSI_WIFI_PASSWORD="YOUR_WIFI_PASSWORD"
CONFIG_CSI_TARGET_IP="192.168.1.20"
CONFIG_CSI_TARGET_PORT=5005
CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y

Replace YOUR_WIFI_SSID, YOUR_WIFI_PASSWORD, and CONFIG_CSI_TARGET_IP with your actual values. The target IP is the machine running the aggregator.

Step 2: Build with Docker

cd firmware/esp32-csi-node

# On Linux/macOS:
docker run --rm -v "$(pwd):/project" -w /project \
  espressif/idf:v5.2 bash -c "idf.py set-target esp32s3 && idf.py build"

# On Windows (Git Bash — MSYS path fix required):
MSYS_NO_PATHCONV=1 docker run --rm -v "$(pwd -W)://project" -w //project \
  espressif/idf:v5.2 bash -c "idf.py set-target esp32s3 && idf.py build"

Build output: build/bootloader.bin, build/partition_table/partition-table.bin, build/esp32-csi-node.bin.

Step 3: Flash to ESP32-S3

Find your serial port (COM7 on Windows, /dev/ttyUSB0 on Linux):

cd firmware/esp32-csi-node/build

python -m esptool --chip esp32s3 --port COM7 --baud 460800 \
  --before default-reset --after hard-reset \
  write-flash --flash-mode dio --flash-freq 80m --flash-size 4MB \
  0x0 bootloader/bootloader.bin \
  0x8000 partition_table/partition-table.bin \
  0x10000 esp32-csi-node.bin

Step 4: Run the aggregator

cargo run -p wifi-densepose-hardware --bin aggregator -- --bind 0.0.0.0:5005 --verbose

Expected output:

Listening on 0.0.0.0:5005...
  [148 bytes from 192.168.1.71:60764]
[node:1 seq:0] sc=64 rssi=-49 amp=9.5
  [276 bytes from 192.168.1.71:60764]
[node:1 seq:1] sc=128 rssi=-64 amp=16.0

Step 5: Verify presence detection

If you see frames streaming (~20/sec), the system is working. Walk near the ESP32 and observe amplitude variance changes in the CSI data.

Configuration Reference

Edit via idf.py menuconfig or sdkconfig.defaults:

Setting	Default	Description
`CSI_NODE_ID`	1	Unique node identifier (0-255)
`CSI_TARGET_IP`	192.168.1.100	Aggregator host IP
`CSI_TARGET_PORT`	5005	Aggregator UDP port
`CSI_WIFI_SSID`	wifi-densepose	WiFi network SSID
`CSI_WIFI_PASSWORD`	(empty)	WiFi password
`CSI_WIFI_CHANNEL`	6	WiFi channel to monitor

Firewall Note

On Windows, you may need to allow inbound UDP on port 5005:

netsh advfirewall firewall add rule name="ESP32 CSI" dir=in action=allow protocol=UDP localport=5005

Architecture

ESP32-S3                              Host Machine
+-------------------+                +-------------------+
| WiFi CSI callback |  UDP/5005      | aggregator binary |
| (promiscuous mode)|  ──────────>   | (Rust, clap CLI)  |
| ADR-018 serialize |  ADR-018       | Esp32CsiParser    |
| stream_sender.c   |  binary frames | CsiFrame output   |
+-------------------+                +-------------------+

Binary Frame Format (ADR-018)

Offset  Size  Field
0       4     Magic: 0xC5110001
4       1     Node ID
5       1     Number of antennas
6       2     Number of subcarriers (LE u16)
8       4     Frequency MHz (LE u32)
12      4     Sequence number (LE u32)
16      1     RSSI (i8)
17      1     Noise floor (i8)
18      2     Reserved
20      N*2   I/Q pairs (n_antennas * n_subcarriers * 2 bytes)

Troubleshooting

Symptom	Cause	Fix
No serial output	Wrong baud rate	Use 115200
WiFi won't connect	Wrong SSID/password	Check sdkconfig.defaults
No UDP frames	Firewall blocking	Add UDP 5005 inbound rule
CSI callback not firing	Promiscuous mode off	Verify `esp_wifi_set_promiscuous(true)` in csi_collector.c
Parse errors in aggregator	Firmware/parser mismatch	Rebuild both from same source