d803bfe2b1
git-subtree-dir: vendor/ruvector git-subtree-split: b64c21726f2bb37286d9ee36a7869fef60cc6900
126 lines
3.3 KiB
Makefile
126 lines
3.3 KiB
Makefile
# RuvLLM ESP32 - Makefile
|
|
# Cross-platform build and flash targets
|
|
|
|
.PHONY: all install deps build flash clean cluster monitor help
|
|
|
|
# Default port (override with: make flash PORT=/dev/ttyUSB1)
|
|
PORT ?= /dev/ttyUSB0
|
|
# Number of chips for cluster (override with: make cluster CHIPS=5)
|
|
CHIPS ?= 2
|
|
# Target variant
|
|
TARGET ?= xtensa-esp32-espidf
|
|
|
|
# Detect OS
|
|
UNAME_S := $(shell uname -s)
|
|
ifeq ($(UNAME_S),Darwin)
|
|
PORT ?= /dev/cu.usbserial-0001
|
|
OPEN_CMD = open
|
|
else ifeq ($(UNAME_S),Linux)
|
|
PORT ?= /dev/ttyUSB0
|
|
OPEN_CMD = xdg-open
|
|
else
|
|
PORT ?= COM6
|
|
OPEN_CMD = start
|
|
endif
|
|
|
|
# Default target
|
|
all: build
|
|
|
|
# Full installation
|
|
install: deps build
|
|
@echo "✓ Installation complete!"
|
|
@echo "Run: make flash PORT=$(PORT)"
|
|
|
|
# Install dependencies
|
|
deps:
|
|
@echo "Installing ESP32 toolchain..."
|
|
@command -v espup >/dev/null 2>&1 || cargo install espup
|
|
@espup install || true
|
|
@command -v espflash >/dev/null 2>&1 || cargo install espflash
|
|
@command -v ldproxy >/dev/null 2>&1 || cargo install ldproxy
|
|
@echo "✓ Dependencies installed"
|
|
|
|
# Build release binary
|
|
build:
|
|
@echo "Building RuvLLM ESP32..."
|
|
@. $$HOME/export-esp.sh 2>/dev/null || true
|
|
cargo build --release
|
|
@echo "✓ Build complete"
|
|
@ls -lh target/$(TARGET)/release/ruvllm-esp32-flash 2>/dev/null || true
|
|
|
|
# Build with federation
|
|
build-federation:
|
|
@echo "Building with federation support..."
|
|
cargo build --release --features federation
|
|
@echo "✓ Federation build complete"
|
|
|
|
# Flash single chip
|
|
flash: build
|
|
@echo "Flashing to $(PORT)..."
|
|
espflash flash --port $(PORT) --monitor target/$(TARGET)/release/ruvllm-esp32-flash
|
|
|
|
# Flash without monitor
|
|
flash-only: build
|
|
espflash flash --port $(PORT) target/$(TARGET)/release/ruvllm-esp32-flash
|
|
|
|
# Monitor serial
|
|
monitor:
|
|
espflash monitor --port $(PORT)
|
|
|
|
# Setup cluster configuration
|
|
cluster:
|
|
@echo "Setting up $(CHIPS)-chip cluster..."
|
|
@./install.sh cluster $(CHIPS)
|
|
@echo "Edit cluster.toml, then run: make cluster-flash"
|
|
|
|
# Flash entire cluster
|
|
cluster-flash: build-federation
|
|
@./cluster-flash.sh
|
|
|
|
# Monitor cluster (requires tmux or screen)
|
|
cluster-monitor:
|
|
@./cluster-monitor.sh
|
|
|
|
# Clean build artifacts
|
|
clean:
|
|
cargo clean
|
|
@rm -f cluster.toml
|
|
@echo "✓ Cleaned"
|
|
|
|
# Show binary size
|
|
size: build
|
|
@echo "Binary size:"
|
|
@ls -lh target/$(TARGET)/release/ruvllm-esp32-flash
|
|
@size target/$(TARGET)/release/ruvllm-esp32-flash 2>/dev/null || true
|
|
|
|
# Run host simulation (no ESP32 needed)
|
|
sim:
|
|
@echo "Running host simulation..."
|
|
cd ../esp32 && cargo run --example user_demo
|
|
|
|
# Help
|
|
help:
|
|
@echo "RuvLLM ESP32 - Makefile Targets"
|
|
@echo ""
|
|
@echo "Single Chip:"
|
|
@echo " make install - Install deps and build"
|
|
@echo " make build - Build release binary"
|
|
@echo " make flash - Flash to PORT (default: $(PORT))"
|
|
@echo " make flash PORT=/dev/ttyUSB1 - Flash to specific port"
|
|
@echo " make monitor - Serial monitor"
|
|
@echo ""
|
|
@echo "Cluster:"
|
|
@echo " make cluster CHIPS=5 - Generate 5-chip cluster config"
|
|
@echo " make cluster-flash - Flash all chips in cluster"
|
|
@echo " make cluster-monitor - Monitor all chips"
|
|
@echo ""
|
|
@echo "Other:"
|
|
@echo " make sim - Run host simulation"
|
|
@echo " make size - Show binary size"
|
|
@echo " make clean - Clean build artifacts"
|
|
@echo ""
|
|
@echo "Current settings:"
|
|
@echo " PORT=$(PORT)"
|
|
@echo " CHIPS=$(CHIPS)"
|
|
@echo " TARGET=$(TARGET)"
|