Adds a `[[forwarding]]` config section so users can explicitly route
domain suffixes to specific upstreams. Config-declared rules take
precedence over auto-discovered rules (macOS scutil, Linux search
domains) via first-match semantics.
Example — the reporter's reverse-DNS case:
[[forwarding]]
suffix = "168.192.in-addr.arpa"
upstream = "100.90.1.63:5361"
Bare IPs default to port 53. IPv6 is supported via
parse_upstream_addr. ForwardingRule::new() constructor replaces
direct struct-literal construction, and make_rule() now delegates
to parse_upstream_addr to fix a latent IPv6 parsing bug.
* chore: document multi-forwarder and cache warming in config and README
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: DNS-over-HTTPS server endpoint (RFC 8484)
Serve DoH at POST /dns-query on the existing HTTPS proxy (port 443).
Automatically enabled when proxy TLS is active — no config needed.
Also fix zone map priority so local zones override RFC 6762 .local
special-use handling.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* style: cargo fmt
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* chore: remove GoatCounter analytics from site
GoatCounter domains (goatcounter.com, gc.zgo.at) are blocked by
Hagezi Pro, which is Numa's default blocklist. A DNS privacy tool
should not embed analytics that its own resolver blocks.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: enable DoT listener by default
DoT now starts automatically with `sudo numa`, matching the proxy and
DoH which are already on by default. The self-signed CA infrastructure
is shared with the proxy, so there is no additional setup. This makes
`numa setup-phone` work out of the box.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* feat: numa setup-phone — QR-based mobile DoT onboarding
Adds a CLI subcommand that generates a one-time mobileconfig profile
containing both the Numa local CA (as a com.apple.security.root payload)
and the DoT DNS settings, then serves it via a temporary HTTP server
and prints a scannable QR code in the terminal.
Flow:
1. User runs `numa setup-phone` (no sudo needed)
2. Detects current LAN IP, reads CA from /usr/local/var/numa/ca.pem
3. Builds combined mobileconfig (CA trust + DoT)
4. Renders QR code with qrcode crate (Unicode block characters)
5. Serves the profile on port 8765, stays open until Ctrl+C
6. Counts successful downloads (multi-device households)
Important caveat documented in instructions: even with the CA bundled
in the profile, iOS still requires the user to manually enable trust
in Settings → General → About → Certificate Trust Settings. Verified
on a real iPhone.
Stable PayloadIdentifiers/UUIDs ensure re-running replaces the
existing profile on iOS rather than accumulating duplicates.
- New module: src/setup_phone.rs (~270 lines)
- New CLI subcommand: `numa setup-phone`
- New dependency: qrcode = "0.14" (default-features = false)
- tokio "signal" feature added for Ctrl+C handling
- 3 unit tests: PEM stripping, mobileconfig generation, QR rendering
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat: mobile API, enriched /health, mobileconfig module
Adds a persistent read-only HTTP listener (default port 8765, LAN-bound)
serving a dedicated subset of Numa's API for iOS/Android companion apps
and as a replacement for the one-shot server setup_phone used to spin up:
GET /health — enriched JSON with version, hostname, LAN IP,
SNI, DoT config, mobile API port, CA
fingerprint, features (shared handler with
the main API on port 5380)
GET /ca.pem — public CA certificate (shared handler)
GET /mobileconfig — full iOS profile (CA trust + DNS settings
pinned to current LAN IP)
GET /ca.mobileconfig — CA-only iOS profile (trust anchor without
DNS override — for the iOS companion app's
programmatic DNS flow via NEDNSSettingsManager)
All routes are idempotent GETs. The mobile API never serves the
state-mutating routes that live on the main API (overrides, blocking
toggle, service CRUD, cache flush), so it is safe to expose on the LAN
regardless of the main API's bind address. The CA private key is never
served by any route.
Opt-in via `[mobile] enabled = true`. Default is false so new installs
do not silently expose a LAN listener after upgrading; our committed
numa.toml template enables it explicitly for spike testing.
New modules:
- src/mobileconfig.rs — ProfileMode::{Full, CaOnly} enum with plist
builder lifted from setup_phone.rs. Full and CaOnly share the CA
payload UUID (same trust anchor) but have distinct top-level UUIDs
so they coexist as separate installable profiles on iOS.
- src/health.rs — HealthMeta cached metadata built once at startup
from config + CA fingerprint (SHA-256 of the PEM via ring), and the
HealthResponse JSON shape shared between the main and mobile APIs.
- src/mobile_api.rs — axum Router for the persistent listener. Reuses
api::health and api::serve_ca from the main API; owns the two
mobileconfig handlers.
Modified:
- src/api.rs — health() returns the enriched HealthResponse, now pub.
serve_ca is now pub so mobile_api can reuse it.
- src/config.rs — MobileConfig section (enabled, port, bind_addr).
- src/ctx.rs — health_meta: HealthMeta field on ServerCtx.
- src/main.rs — builds HealthMeta at startup, spawns mobile API
listener if enabled.
- src/lan.rs — build_announcement takes &HealthMeta and writes
enriched TXT records (version, api_port, proto, dot_port, ca_fp).
SRV port now reports the mobile API port; peer discovery still
reads TXT `services=` so this is backwards compatible. Always
announces even when no .numa services are registered, so the iOS
companion app can discover Numa via mDNS regardless of service
state.
- src/setup_phone.rs — reduced from 267 to 100 lines. The CLI is now
a thin QR wrapper over the persistent /mobileconfig endpoint; the
hand-rolled one-shot HTTP server (accept_loop, RUST_OK_HEADERS,
RUST_NOT_FOUND, download counter) is gone.
- src/dot.rs — test fixture updated with HealthMeta::test_fixture().
- numa.toml — commented [mobile] section, enabled = true for spike.
Tests: 136 unit tests passing (5 new in mobileconfig, 3 new in health).
cargo clippy clean. Integration sanity check: curl'd /health, /ca.pem,
/mobileconfig, /ca.mobileconfig against a running numa — all return
200 with correct content types and valid response bodies.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: setup-phone probe, unknown command error, query source in dashboard
- setup-phone now probes the mobile API before printing the QR code
and shows an actionable error if [mobile] is not enabled
- Unknown CLI subcommands print an error instead of silently
attempting to start a full server
- Dashboard query log shows source IP under timestamp (localhost
for loopback, full IP for LAN devices) with full addr on hover
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: use FHS-compliant /var/lib/numa as Linux data dir default
numa's default system-wide data directory was hardcoded to
/usr/local/var/numa for all Unix platforms. This is the right path on
macOS (Homebrew prefix convention) but non-FHS on Linux, where Arch /
Fedora / Debian / etc. expect persistent state under /var/lib/<pkg>.
The mismatch was invisible to existing users (numa creates the dir
silently on first run) but immediately surfaces when packaging for a
distro — see PR #33 (community contribution to add an Arch AUR package)
which had to add fragile sed-based path patching at PKGBUILD build time.
The fix moves the path decision into a small helper:
- daemon_data_dir() — cfg-gated platform dispatch (linux/macos)
- resolve_linux_data_dir() — pure function, takes "does X exist?"
as parameters, returns the right path
Linux behavior:
- Fresh install → /var/lib/numa (FHS)
- Upgrading from pre-v0.10.1 install → /usr/local/var/numa (legacy)
- Both paths exist → /var/lib/numa (FHS wins)
The legacy fallback is critical: existing v0.10.0 Linux users have
their CA cert + services.json under /usr/local/var/numa. Returning
the new path unconditionally would cause CA regeneration on upgrade,
breaking every browser that had trusted the previous CA. The fallback
is checked at startup via std::path::Path::exists, so the upgrade is
seamless and zero-config.
macOS behavior is unchanged — /usr/local/var/numa is still correct
because Homebrew's prefix is /usr/local.
Test coverage:
- resolve_linux_data_dir is a pure function gated cfg(any(linux,test))
so the same code path is unit-tested on every platform's CI run.
- Four tests cover all combinations of (legacy_exists, fhs_exists),
asserting the migration logic stays correct under future edits.
The default config in numa.toml is also updated to document the new
per-platform default paths.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* test: end-to-end FHS path verification + simplify cleanup
Two related changes from a /simplify pass and a follow-up testing
finalization:
1. lib.rs cleanup (no behavior change):
- Drop FHS_LINUX_DATA_DIR and LEGACY_LINUX_DATA_DIR consts. Both
were used in only 4 places total and the unit tests already
bypassed them with string literals, so they were over-engineering.
Inline the strings in daemon_data_dir() and resolve_linux_data_dir().
- Trim narrating doc/comments on the helper and the test bodies.
Keep only the non-obvious WHY (the macOS Homebrew note and the
migration-keeps-legacy rationale).
2. tests/docker/smoke-arch.sh:
- Cherry-picked the previously-uncommitted Arch compatibility smoke
test from feat/smoke-arch.
- Removed the [server] data_dir = "/tmp/numa-smoke" override from
the test config so the script now exercises the DEFAULT data dir
code path — which is exactly what the FHS fix touches.
- Added a path assertion after the dig succeeds: verify that
/var/lib/numa/ca.pem exists (FHS) and /usr/local/var/numa is
absent (no accidental dual-creation on a fresh install).
Verified end-to-end on archlinux:latest (Apple Silicon, Rosetta):
── building + running numa on archlinux:latest ──
── cargo build --release --locked ──
Finished `release` profile [optimized] target(s) in 24.02s
── dig @127.0.0.1 -p 5354 google.com A ──
142.251.38.206
── FHS path check ──
✓ CA cert at /var/lib/numa/ca.pem (FHS path)
✓ legacy path /usr/local/var/numa absent (fresh install used FHS)
── smoke-arch passed ──
This closes the testing gap where the unit tests covered the
path-decision LOGIC in isolation but nothing exercised the live
wiring on a real Linux filesystem.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Reverts the NUMA_DATA_DIR env var added in the previous commit and
replaces it with a [server] data_dir TOML field. Numa already has a
well-developed config system; adding a parallel env-var mechanism
for a single knob was wrong.
The principle: TOML is for application behavior configuration. Env
vars are for bootstrap values (HOME, SUDO_USER to discover paths
before config loads) and standard ecosystem conventions (RUST_LOG).
data_dir is neither — it's an app knob, so it belongs in the TOML.
Changes:
- lib.rs::data_dir() reverts to the platform-specific fallback only
- config.rs adds `data_dir: Option<PathBuf>` to ServerConfig
- main.rs resolves config.server.data_dir with fallback to
numa::data_dir() and passes it to build_tls_config, then stores the
resolved path on ctx.data_dir for downstream consumers
- tls.rs::build_tls_config takes `data_dir: &Path` as an explicit
parameter instead of calling crate::data_dir() behind the caller's
back. regenerate_tls and dot.rs self_signed_tls now pass
&ctx.data_dir, honoring whatever path the config resolved to
- tests/integration.sh Suite 6 uses `data_dir = "$NUMA_DATA"` in its
test TOML instead of the NUMA_DATA_DIR env var prefix
- numa.toml gains a commented-out data_dir example
No behavior change for existing production deployments (the default
path is unchanged). Test harness is now fully config-driven, and
containerized deploys can override data_dir via mount+config without
needing env var injection.
127/127 unit tests pass, Suite 6 passes end-to-end.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Matches the style of the other opt-in sections (blocking, dnssec, lan).
Documents all five DotConfig fields with their defaults.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat: resolve .numa services to LAN IP for remote clients
Remote DNS clients (e.g. phones on same WiFi) received 127.0.0.1 for
local .numa services, which is unreachable from their perspective.
Now returns the host's LAN IP when the query originates from a
non-loopback address. Also auto-widens proxy bind to 0.0.0.0 when
DNS is already public, and adds a startup warning when the proxy
remains localhost-only.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: respect proxy bind_addr config, don't auto-widen
The auto-widen silently overrode an explicit config value — the user's
config should be the source of truth. Now the proxy always uses the
configured bind_addr, and the warning fires whenever it's 127.0.0.1.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* docs: update proxy bind_addr comment in example config
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat: DNS-over-HTTPS upstream forwarding
Encrypt upstream queries via DoH — ISPs see HTTPS traffic on port 443,
not plaintext DNS on port 53. URL scheme determines transport:
https:// = DoH, bare IP = plain UDP. Falls back to Quad9 DoH when
system resolver cannot be detected.
- Upstream enum (Udp/Doh) with Display and PartialEq
- BytePacketBuffer::from_bytes constructor
- reqwest http2 feature for DoH server compatibility
- network_watch_loop guards against DoH→UDP silent downgrade
- 5 new tests (mock DoH server, HTTP errors, timeout)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* style: cargo fmt
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* docs: add DoH to README — Why Numa, comparison table, roadmap
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
- LAN discovery disabled by default (opt-in via [lan] enabled = true)
- Replace custom JSON multicast (239.255.70.78:5390) with standard mDNS
(_numa._tcp.local on 224.0.0.251:5353) using existing DNS parser
- Instance ID in TXT record for multi-instance self-filtering
- API and proxy bind to 127.0.0.1 by default (0.0.0.0 when LAN enabled)
- Path-based routing: longest prefix match with optional prefix stripping
via [[services]] routes = [{path, port, strip?}]
- REST API: GET/POST/DELETE /services/{name}/routes
- Dashboard shows route lines per service when configured
- Segment-boundary route matching (prevents /api matching /apiary)
- Route path validation (rejects path traversal)
Closes#11
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
HTTP reverse proxy on port 80 lets developers use clean domain names
(frontend.numa, api.numa) instead of localhost:PORT. Includes WebSocket
upgrade support for HMR, TCP health checks, dashboard UI panel, and
REST API for service management. numa.numa is preconfigured for the
dashboard itself.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Default upstream auto-detected from system resolver (scutil/resolv.conf)
instead of hardcoding Google 8.8.8.8. Falls back to Quad9 (9.9.9.9).
- Single scutil --dns pass for both upstream detection and forwarding rules
- Linux: reads backup resolv.conf if current only has loopback
- Service start/stop now couples DNS config (install on start, uninstall on stop)
- Install script for one-line binary install from GitHub Releases
- GitHub Actions release workflow: builds for macOS/Linux x86_64/aarch64
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- DNS-level ad blocking: 385K+ domains via Hagezi Pro blocklist, subdomain
matching, one-click allowlist, pause/toggle, background refresh every 24h
- Live dashboard at :5380 with real-time stats, query log, override
management (create/edit/delete), blocking controls
- System DNS auto-discovery: parses scutil --dns on macOS to find
conditional forwarding rules (Tailscale, VPN split-DNS)
- REST API expanded to 18 endpoints (blocking, overrides, diagnostics)
- Startup banner with colored system info
- Performance benchmarks (bench/dns-bench.sh)
- Landing page updated with new positioning and comparison table
- CI, Dockerfile, LICENSE, development plan docs
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
