patch 8.2.3498: recover test may fail on some systems

Problem:    Recover test may fail on some systems.
Solution:   Adjust the little endian and 64 bit detection. (James McCoy,
            closes #8941)

.github/CODEOWNERS

@@ -97,8 +97,10 @@ runtime/ftplugin/markdown.vim		@tpope
 runtime/ftplugin/matlab.vim		@cecamp
 runtime/ftplugin/meson.vim		@Liambeguin
 runtime/ftplugin/modula3.vim		@dkearns
+runtime/ftplugin/nginx.vim		@chr4
 runtime/ftplugin/nroff.vim		@a-vrma
 runtime/ftplugin/nsis.vim		@k-takata
+runtime/ftplugin/octave.vim		@dkearns
 runtime/ftplugin/pascal.vim		@dkearns
 runtime/ftplugin/pbtxt.vim		@lakshayg
 runtime/ftplugin/pdf.vim		@tpope
@@ -116,20 +118,39 @@ runtime/ftplugin/typescriptreact.vim	@dkearns
 runtime/ftplugin/xml.vim		@chrisbra
 runtime/ftplugin/zsh.vim		@chrisbra
 runtime/indent/bst.vim			@tpope
+runtime/indent/cdl.vim			@dkearns
+runtime/indent/config.vim		@dkearns
+runtime/indent/css.vim			@dkearns
 runtime/indent/cucumber.vim		@tpope
+runtime/indent/d.vim			@dkearns
 runtime/indent/dosbatch.vim		@k-takata
+runtime/indent/dtd.vim			@dkearns
+runtime/indent/dylan.vim		@dkearns
+runtime/indent/elm.vim			@andys8
 runtime/indent/eruby.vim		@tpope @dkearns
+runtime/indent/eterm.vim		@dkearns
+runtime/indent/framescript.vim		@dkearns
 runtime/indent/gitconfig.vim		@tpope
 runtime/indent/haml.vim			@tpope
+runtime/indent/idlang.vim		@dkearns
+runtime/indent/ld.vim			@dkearns
 runtime/indent/liquid.vim		@tpope
+runtime/indent/make.vim			@dkearns
 runtime/indent/meson.vim		@Liambeguin
+runtime/indent/mma.vim			@dkearns
+runtime/indent/nginx.vim		@chr4
 runtime/indent/nsis.vim			@k-takata
+runtime/indent/occam.vim		@dkearns
+runtime/indent/postscr.vim		@dkearns
+runtime/indent/prolog.vim		@dkearns
 runtime/indent/ps1.vim			@heaths
+runtime/indent/readline.vim		@dkearns
 runtime/indent/ruby.vim			@AndrewRadev @dkearns
 runtime/indent/sass.vim			@tpope
 runtime/indent/scss.vim			@tpope
 runtime/indent/sh.vim			@chrisbra
 runtime/indent/systemverilog.vim	@Kocha
+runtime/indent/tcl.vim			@dkearns
 runtime/indent/teraterm.vim		@k-takata
 runtime/indent/xml.vim			@chrisbra
 runtime/indent/zsh.vim			@chrisbra
@@ -191,6 +212,7 @@ runtime/syntax/markdown.vim		@tpope
 runtime/syntax/meson.vim		@Liambeguin
 runtime/syntax/modula3.vim		@dkearns
 runtime/syntax/netrw.vim		@cecamp
+runtime/syntax/nginx.vim		@chr4
 runtime/syntax/nroff.vim		@jmarshall
 runtime/syntax/nsis.vim			@k-takata
 runtime/syntax/pascal.vim		@dkearns

.github/ISSUE_TEMPLATE/bug_report.md

@@ -1,34 +0,0 @@
----
-name: Bug report
-about: Create a report to help us improve Vim
-title: ''
-labels: ''
-
----
-
-_Instructions: Replace the template text and remove irrelevant text (including this line)_
-
-**Describe the bug**
-A clear and concise description of what the bug is.
-(Issues related to the runtime files should be reported to their maintainer, check the file header.)
-
-**To Reproduce**
-Detailed steps to reproduce the behavior:
-1. Run `vim --clean` (or `gvim --clean`, etc.)
-2. Edit `filename`
-3. Type '....'
-4. Describe the error
-
-**Expected behavior**
-A clear and concise description of what you expected to happen.
-
-**Screenshots**
-If applicable, copy/paste the text or add screenshots to help explain your problem.
-
-**Environment (please complete the following information):**
- - Vim version [e.g. 8.1.1234] (Or paste the result of `vim --version`.)
- - OS: [e.g. Ubuntu 18.04, Windows 10 1809, macOS 10.14]
- - Terminal: [e.g. GNOME Terminal, mintty, iTerm2, tmux, GNU screen] (Use GUI if you use the GUI.)
-
-**Additional context**
-Add any other context about the problem here.

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -0,0 +1,47 @@
+---
+name: Bug report
+description: Create a report to help us improve Vim.
+labels: [bug]
+
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Thanks for reporting issues of Vim!
+        
+        To make it easier for us to help you please enter detailed information below.
+  - type: textarea
+    attributes:
+      label: Steps to reproduce
+      placeholder: |
+        1. 
+        2. 
+        3. 
+        4. 
+    validations:
+      required: true
+  - type: textarea
+    attributes:
+      label: Expected behaviour
+      placeholder: A clear and concise description of what you expected to happen.
+    validations:
+      required: true
+  - type: input
+    attributes:
+      label: Operating system
+      description: >
+        Your operating system name, version and desktop environment.
+    validations:
+      required: true
+  - type: input
+    attributes:
+      label: Version of Vim
+      description: >
+        The name of your development environment, version. [e.g. GNOME Terminal (v0.0.0000)]
+    validations:
+      required: true
+  - type: textarea
+    attributes:
+      label: Logs and stack traces
+      placeholder: Insert log or other text here (if necessary)
+      render: shell

.github/workflows/ci.yml

@@ -40,6 +40,7 @@ jobs:
             compiler: gcc
             coverage: true
             extra: testgui
+            uchar: true
           - features: huge
             compiler: clang
             extra: asan
@@ -111,10 +112,14 @@ jobs:
             ;;
           esac
 
+          CFLAGS=""
           if ${{ matrix.coverage == true }}; then
-            echo "CFLAGS=--coverage -DUSE_GCOV_FLUSH"
+            CFLAGS="$CFLAGS --coverage -DUSE_GCOV_FLUSH"
             echo "LDFLAGS=--coverage"
           fi
+          if ${{ matrix.uchar == true }}; then
+            CFLAGS="$CFLAGS -funsigned-char"
+          fi
           if ${{ contains(matrix.extra, 'testgui') }}; then
             echo "TEST=-C src testgui"
           fi
@@ -130,6 +135,7 @@ jobs:
           if ${{ contains(matrix.extra, 'vimtags') }}; then
             echo "TEST=-C runtime/doc vimtags VIMEXE=../../${SRCDIR}/vim"
           fi
+          echo "CFLAGS=$CFLAGS"
           ) >> $GITHUB_ENV
 
       - name: Set up system
@@ -201,18 +207,18 @@ jobs:
           do_test() { sg audio "sg $(id -gn) '$*'"; }
           do_test make ${SHADOWOPT} ${TEST}
 
-      - name: Coveralls
-        if: matrix.coverage && success() && github.event_name != 'pull_request'
-        env:
-          COVERALLS_REPO_TOKEN: ${{ secrets.COVERALLS_REPO_TOKEN }}
-          COVERALLS_PARALLEL: true
-          TRAVIS_JOB_ID: ${{ github.run_id }}
-        run: |
-          sudo apt-get install -y python3-setuptools python3-wheel
-          sudo -H pip3 install pip -U
-          # needed for https support for coveralls building cffi only works with gcc, not with clang
-          CC=gcc pip3 install --user cpp-coveralls pyopenssl ndg-httpsclient pyasn1
-          ~/.local/bin/coveralls -b "${SRCDIR}" -x .xs -e "${SRCDIR}"/if_perl.c -e "${SRCDIR}"/xxd -e "${SRCDIR}"/libvterm --encodings utf-8
+      #      - name: Coveralls
+      #        if: matrix.coverage && success() && github.event_name != 'pull_request'
+      #        env:
+      #          COVERALLS_REPO_TOKEN: ${{ secrets.COVERALLS_REPO_TOKEN }}
+      #          COVERALLS_PARALLEL: true
+      #          TRAVIS_JOB_ID: ${{ github.run_id }}
+      #        run: |
+      #          sudo apt-get install -y python3-setuptools python3-wheel
+      #          sudo -H pip3 install pip -U
+      #          # needed for https support for coveralls building cffi only works with gcc, not with clang
+      #          CC=gcc pip3 install --user cpp-coveralls pyopenssl ndg-httpsclient pyasn1
+      #          ~/.local/bin/coveralls -b "${SRCDIR}" -x .xs -e "${SRCDIR}"/if_perl.c -e "${SRCDIR}"/xxd -e "${SRCDIR}"/libvterm --encodings utf-8
 
       - name: Codecov
         if: matrix.coverage && success()
@@ -228,18 +234,18 @@ jobs:
             false # in order to fail a job
           done
 
-  coveralls:
-    runs-on: ubuntu-18.04
-
-    needs: linux
-    if: always() && github.event_name != 'pull_request'
-
-    steps:
-      - name: Parallel finished
-        env:
-          COVERALLS_REPO_TOKEN: ${{ secrets.COVERALLS_REPO_TOKEN }}
-        run: |
-          curl -k "https://coveralls.io/webhook?repo_token=${COVERALLS_REPO_TOKEN}" -d "payload[build_num]=${GITHUB_RUN_ID}&payload[status]=done"
+  #  coveralls:
+  #    runs-on: ubuntu-18.04
+  #
+  #    needs: linux
+  #    if: always() && github.event_name != 'pull_request'
+  #
+  #    steps:
+  #      - name: Parallel finished
+  #        env:
+  #          COVERALLS_REPO_TOKEN: ${{ secrets.COVERALLS_REPO_TOKEN }}
+  #        run: |
+  #          curl -k "https://coveralls.io/webhook?repo_token=${COVERALLS_REPO_TOKEN}" -d "payload[build_num]=${GITHUB_RUN_ID}&payload[status]=done"
 
   macos:
     runs-on: macos-latest

runtime/autoload/ada.vim

@@ -67,13 +67,13 @@ if exists ('g:ada_with_gnat_project_files')
     endfor
 endif
 
-" Section: add	standart exception {{{2
+" Section: add	standard exception {{{2
 "
 for Item in ['Constraint_Error', 'Program_Error', 'Storage_Error', 'Tasking_Error', 'Status_Error', 'Mode_Error', 'Name_Error', 'Use_Error', 'Device_Error', 'End_Error', 'Data_Error', 'Layout_Error', 'Length_Error', 'Pattern_Error', 'Index_Error', 'Translation_Error', 'Time_Error', 'Argument_Error', 'Tag_Error', 'Picture_Error', 'Terminator_Error', 'Conversion_Error', 'Pointer_Error', 'Dereference_Error', 'Update_Error']
     let g:ada#Keywords += [{
 	    \ 'word':  Item,
 	    \ 'menu':  'exception',
-	    \ 'info':  'Ada standart exception.',
+	    \ 'info':  'Ada standard exception.',
 	    \ 'kind':  'x',
 	    \ 'icase': 1}]
 endfor
@@ -210,7 +210,7 @@ function ada#Word (...)
    let l:Line = substitute (getline (l:Line_Nr), g:ada#Comment, '', '' )
 
    " Cope with tag searching for items in comments; if we are, don't loop
-   " backards looking for previous lines
+   " backwards looking for previous lines
    if l:Column_Nr > strlen(l:Line)
       " We were in a comment
       let l:Line = getline(l:Line_Nr)

runtime/autoload/adacomplete.vim

@@ -14,7 +14,7 @@
 "		15.10.2006 MK Bram's suggestion for runtime integration
 "		05.11.2006 MK Bram suggested not to use include protection for
 "			      autoload
-"		05.11.2006 MK Bram suggested agaist using setlocal omnifunc 
+"		05.11.2006 MK Bram suggested against using setlocal omnifunc 
 "		05.11.2006 MK Bram suggested to save on spaces
 "    Help Page: ft-ada-omni
 "------------------------------------------------------------------------------

runtime/autoload/csscomplete.vim

@@ -4,7 +4,7 @@
 "           plus CSS Speech Module <http://www.w3.org/TR/css3-speech/>
 " Maintainer: Kao, Wei-Ko(othree) ( othree AT gmail DOT com )
 " Original Author: Mikolaj Machowski ( mikmach AT wp DOT pl )
-" Last Change: 2018 Jul 02
+" Last Change: 2021 Sep 21
 
 let s:values = split("all additive-symbols align-content align-items align-self animation animation-delay animation-direction animation-duration animation-fill-mode animation-iteration-count animation-name animation-play-state animation-timing-function backface-visibility background background-attachment background-blend-mode background-clip background-color background-image background-origin background-position background-repeat background-size block-size border border-block-end border-block-end-color border-block-end-style border-block-end-width border-block-start border-block-start-color border-block-start-style border-block-start-width border-bottom border-bottom-color border-bottom-left-radius border-bottom-right-radius border-bottom-style border-bottom-width border-collapse border-color border-image border-image-outset border-image-repeat border-image-slice border-image-source border-image-width border-inline-end border-inline-end-color border-inline-end-style border-inline-end-width border-inline-start border-inline-start-color border-inline-start-style border-inline-start-width border-left border-left-color border-left-style border-left-width border-radius border-right border-right-color border-right-style border-right-width border-spacing border-style border-top border-top-color border-top-left-radius border-top-right-radius border-top-style border-top-width border-width bottom box-decoration-break box-shadow box-sizing break-after break-before break-inside caption-side clear clip clip-path color columns column-count column-fill column-gap column-rule column-rule-color column-rule-style column-rule-width column-span column-width content counter-increment counter-reset cue cue-before cue-after cursor direction display empty-cells fallback filter flex flex-basis flex-direction flex-flow flex-grow flex-shrink flex-wrap float font font-family font-feature-settings font-kerning font-language-override font-size font-size-adjust font-stretch font-style font-synthesis font-variant font-variant-alternates font-variant-caps font-variant-east-asian font-variant-ligatures font-variant-numeric font-variant-position font-weight grid grid-area grid-auto-columns grid-auto-flow grid-auto-position grid-auto-rows grid-column grid-column-start grid-column-end grid-row grid-row-start grid-row-end grid-template grid-template-areas grid-template-rows grid-template-columns height hyphens image-rendering image-resolution image-orientation ime-mode inline-size isolation justify-content left letter-spacing line-break line-height list-style list-style-image list-style-position list-style-type margin margin-block-end margin-block-start margin-bottom margin-inline-end margin-inline-start margin-left margin-right margin-top marks mask mask-type max-block-size max-height max-inline-size max-width max-zoom min-block-size min-height min-inline-size min-width min-zoom mix-blend-mode negative object-fit object-position offset-block-end offset-block-start offset-inline-end offset-inline-start opacity order orientation orphans outline outline-color outline-offset outline-style outline-width overflow overflow-wrap overflow-x overflow-y pad padding padding-block-end padding-block-start padding-bottom padding-inline-end padding-inline-start padding-left padding-right padding-top page-break-after page-break-before page-break-inside pause-before pause-after pause perspective perspective-origin pointer-events position prefix quotes range resize rest rest-before rest-after right ruby-align ruby-merge ruby-position scroll-behavior scroll-snap-coordinate scroll-snap-destination scroll-snap-points-x scroll-snap-points-y scroll-snap-type scroll-snap-type-x scroll-snap-type-y shape-image-threshold shape-margin shape-outside speak speak-as suffix symbols system table-layout tab-size text-align text-align-last text-combine-upright text-decoration text-decoration-color text-decoration-line text-emphasis text-emphasis-color text-emphasis-position text-emphasis-style text-indent text-orientation text-overflow text-rendering text-shadow text-transform text-underline-position top touch-action transform transform-box transform-origin transform-style transition transition-delay transition-duration transition-property transition-timing-function unicode-bidi unicode-range user-zoom vertical-align visibility voice-balance voice-duration voice-family voice-pitch voice-rate voice-range voice-stress voice-volume white-space widows width will-change word-break word-spacing word-wrap writing-mode z-index zoom")
 
@@ -38,12 +38,12 @@ function! csscomplete#CompleteCSS(findstart, base)
   if exists("b:compl_context")
     let line = getline('.')
     let compl_begin = col('.') - 2
-    let after = line[compl_begin:]
+    let b:after = line[compl_begin:]
     let line = b:compl_context
     unlet! b:compl_context
   else
     let line = a:base
-    let after = ''
+    let b:after = ''
   endif
 
   let res = []
@@ -311,7 +311,7 @@ function! csscomplete#CompleteCSS(findstart, base)
       let values = ["normal", "italic", "oblique", "small-caps", "bold", "bolder", "lighter", "100", "200", "300", "400", "500", "600", "700", "800", "900", "xx-small", "x-small", "small", "medium", "large", "x-large", "xx-large", "larger", "smaller", "sans-serif", "serif", "monospace", "cursive", "fantasy", "caption", "icon", "menu", "message-box", "small-caption", "status-bar"]
     elseif prop =~ '^\%(height\|width\)$'
       let values = ["auto", "border-box", "content-box", "max-content", "min-content", "available", "fit-content"]
-    elseif prop =~ '^\%(left\|rigth\)$'
+    elseif prop =~ '^\%(left\|right\)$'
       let values = ["auto"]
     elseif prop == 'image-rendering'
       let values = ["auto", "crisp-edges", "pixelated"]

runtime/autoload/decada.vim

@@ -23,7 +23,7 @@ endif
 
 function decada#Unit_Name () dict				     " {{{1
     "	Convert filename into acs unit:
-    "	    1:  remove the file extenstion.
+    "	    1:  remove the file extension.
     "	    2:  replace all double '_' or '-' with an dot (which denotes a separate)
     "	    3:  remove a trailing '_' (which denotes a specification)
     return substitute (substitute (expand ("%:t:r"), '__\|-', ".", "g"), '_$', "", '')

runtime/autoload/dist/ft.vim

@@ -269,7 +269,8 @@ func dist#ft#FTm()
     return
   endif
 
-  let octave_block_terminators = '\<end\%(_try_catch\|classdef\|enumeration\|events\|for\|function\|if\|methods\|parfor\|properties\|switch\|while\)\>'
+  " excluding end(for|function|if|switch|while) common to Murphi
+  let octave_block_terminators = '\<end\%(_try_catch\|classdef\|enumeration\|events\|methods\|parfor\|properties\)\>'
 
   let n = 1
   let saw_comment = 0 " Whether we've seen a multiline comment leader.
@@ -285,8 +286,7 @@ func dist#ft#FTm()
       setf objc
       return
     endif
-    if line =~ '^\s*\%(#\|%!\|[#%]{\=\s*$\)' ||
-	  \ line =~ '^\s*unwind_protect\>' ||
+    if line =~ '^\s*\%(#\|%!\)' || line =~ '^\s*unwind_protect\>' ||
 	  \ line =~ '\%(^\|;\)\s*' .. octave_block_terminators
       setf octave
       return

runtime/autoload/getscript.vim

@@ -129,7 +129,7 @@ fun! getscript#GetLatestVimScripts()
 " insure that wget is executable
   if executable(g:GetLatestVimScripts_wget) != 1
    echoerr "GetLatestVimScripts needs ".g:GetLatestVimScripts_wget." which apparently is not available on your system"
-"   call Dret("GetLatestVimScripts : wget not executable/availble")
+"   call Dret("GetLatestVimScripts : wget not executable/available")
    return
   endif
 
@@ -347,7 +347,7 @@ fun! s:GetOneScript(...)
   set t_ti= t_te= nors
 
  " put current line on top-of-screen and interpret it into
- " a      script identifer  : used to obtain webpage
+ " a      script identifier  : used to obtain webpage
  "        source identifier : used to identify current version
  " and an associated comment: used to report on what's being considered
   if a:0 >= 3

runtime/autoload/haskellcomplete.vim

@@ -54,7 +54,7 @@ function! haskellcomplete#Complete(findstart, base)
 
     if b:completingLangExtension
         if a:base ==? ""
-            " Return all posible Lang extensions
+            " Return all possible Lang extensions
             return s:langExtensions
         else
             let l:matches = []
@@ -70,7 +70,7 @@ function! haskellcomplete#Complete(findstart, base)
 
     elseif b:completingOptionsGHC
         if a:base ==? ""
-            " Return all posible GHC options
+            " Return all possible GHC options
             return s:optionsGHC
         else
             let l:matches = []
@@ -86,7 +86,7 @@ function! haskellcomplete#Complete(findstart, base)
 
     elseif b:completingModule
         if a:base ==? ""
-            " Return all posible modules
+            " Return all possible modules
             return s:commonModules
         else
             let l:matches = []

runtime/autoload/htmlcomplete.vim

@@ -486,7 +486,7 @@ function! htmlcomplete#CompleteTags(findstart, base)
 			endif
 		endif
 		" Value of attribute completion {{{
-		" If attr contains =\s*[\"'] we catched value of attribute
+		" If attr contains =\s*[\"'] we match value of attribute
 		if attr =~ "=\s*[\"']" || attr =~ "=\s*$"
 			" Let do attribute specific completion
 			let attrname = matchstr(attr, '.*\ze\s*=')

runtime/autoload/netrw.vim

@@ -1751,7 +1751,8 @@ fun! s:NetrwOptionsSafe(islocal)
   if &cpo =~ 'a' | call s:NetrwSetSafeSetting("&cpo",substitute(&cpo,'a','','g')) | endif
   if &cpo =~ 'A' | call s:NetrwSetSafeSetting("&cpo",substitute(&cpo,'A','','g')) | endif
   setl fo=nroql2
-  call s:NetrwSetSafeSetting("&go","begmr")
+  " call s:NetrwSetSafeSetting("&go","begmr")
+  if &go =~ '\ca' | call s:NetrwSetSafeSetting("&go",substitute(&go,'\ca','','g')) | endif
   call s:NetrwSetSafeSetting("&l:hid",0)
   call s:NetrwSetSafeSetting("&l:im",0)
   setl isk+=@ isk+=* isk+=/
@@ -4267,7 +4268,7 @@ fun! s:NetrwGetBuffer(islocal,dirname)
   endif
 "  call Decho("  bufnum#".bufnum,'~'.expand("<slnum>"))
 
-  " highjack the current buffer
+  " hijack the current buffer
   "   IF the buffer already has the desired name
   "   AND it is empty
   let curbuf = bufname("%")
@@ -4275,7 +4276,7 @@ fun! s:NetrwGetBuffer(islocal,dirname)
    let curbuf = getcwd()
   endif
 "  call Dredir("ls!","NetrwGetFile (renamed buffer back to remote filename<".rfile."> : expand(%)<".expand("%").">)")
-"  call Decho("deciding if netrw may highjack the current buffer#".bufnr("%")."<".curbuf.">",'~'.expand("<slnum>"))
+"  call Decho("deciding if netrw may hijack the current buffer#".bufnr("%")."<".curbuf.">",'~'.expand("<slnum>"))
 "  call Decho("..dirname<".dirname.">  IF dirname == bufname",'~'.expand("<slnum>"))
 "  call Decho("..curbuf<".curbuf.">",'~'.expand("<slnum>"))
 "  call Decho("..line($)=".line("$")." AND this is 1",'~'.expand("<slnum>"))
@@ -4284,7 +4285,7 @@ fun! s:NetrwGetBuffer(islocal,dirname)
 "   call Dret("s:NetrwGetBuffer 0<cleared buffer> : highjacking buffer#".bufnr("%"))
    return 0
   else  " DEBUG
-"   call Decho("..did NOT highjack buffer",'~'.expand("<slnum>"))
+"   call Decho("..did NOT hijack buffer",'~'.expand("<slnum>"))
   endif
   " Aug 14, 2021: was thinking about looking for a [No Name] buffer here and using it, but that might cause problems
 
@@ -6845,7 +6846,7 @@ fun! s:NetrwMarkFile(islocal,fname)
 
   " sanity check
   if empty(a:fname)
-"   call Dret("s:NetrwMarkFile : emtpy fname")
+"   call Dret("s:NetrwMarkFile : empty fname")
    return
   endif
   let curdir = s:NetrwGetCurdir(a:islocal)

runtime/autoload/phpcomplete.vim

@@ -9,7 +9,7 @@
 "
 "		let g:phpcomplete_relax_static_constraint = 1/0  [default 0]
 "			Enables completion for non-static methods when completing for static context (::).
-"			This generates E_STRICT level warning, but php calls these methods nontheless.
+"			This generates E_STRICT level warning, but php calls these methods nonetheless.
 "
 "		let g:phpcomplete_complete_for_unknown_classes = 1/0 [default 0]
 "			Enables completion of variables and functions in "everything under the sun" fashion
@@ -28,7 +28,7 @@
 "			This option controls the number of characters the user needs to type before
 "			the tags will be searched for namespaces and classes in typed out namespaces in
 "			"use ..." context. Setting this to 0 is not recommended because that means the code
-"			have to scan every tag, and vim's taglist() function runs extremly slow with a
+"			have to scan every tag, and vim's taglist() function runs extremely slow with a
 "			"match everything" pattern.
 "
 "		let g:phpcomplete_parse_docblock_comments = 1/0 [default 0]
@@ -263,7 +263,7 @@ function! phpcomplete#CompleteUse(base) " {{{
 				call add(no_namespace_matches, {'word': namespace_for_class.'\'.tag.name, 'kind': tag.kind, 'menu': tag.filename, 'info': tag.filename })
 			endif
 		endfor
-		" if it seems that the tags file have namespace informations we can safely throw
+		" if it seems that the tags file have namespace information we can safely throw
 		" away namespaceless tag matches since we can be sure they are invalid
 		if patched_ctags_detected
 			no_namespace_matches = []
@@ -805,7 +805,7 @@ function! phpcomplete#CompleteClassName(base, kinds, current_namespace, imports)
 		endif
 	endfor
 
-	" resolve the typed in part with namespaces (if theres a \ in it)
+	" resolve the typed in part with namespaces (if there's a \ in it)
 	let [tag_match_pattern, namespace_for_class] = phpcomplete#ExpandClassName(a:base, a:current_namespace, a:imports)
 
 	let tags = []
@@ -921,11 +921,11 @@ function! s:getNextCharWithPos(filelines, current_pos) " {{{
 endfunction " }}}
 
 function! phpcomplete#EvaluateModifiers(modifiers, required_modifiers, prohibited_modifiers) " {{{
-	" if theres no modifier, and no modifier is allowed and no modifier is required
+	" if there's no modifier, and no modifier is allowed and no modifier is required
 	if len(a:modifiers) == 0 && len(a:required_modifiers) == 0
 		return 1
 	else
-		" check if every requred modifier is present
+		" check if every required modifier is present
 		for required_modifier in a:required_modifiers
 			if index(a:modifiers, required_modifier) == -1
 				return 0
@@ -1253,7 +1253,7 @@ function! phpcomplete#GetCurrentInstruction(line_number, col_number, phpbegin) "
 				endif
 			endif
 
-			" save the coma position for later use if theres a "naked" , possibly separating a parameter and it is not in a parented part
+			" save the coma position for later use if there's a "naked" , possibly separating a parameter and it is not in a parented part
 			if first_coma_break_pos == -1 && current_char == ','
 				let first_coma_break_pos = len(instruction)
 			endif
@@ -1299,7 +1299,7 @@ function! phpcomplete#GetCurrentInstruction(line_number, col_number, phpbegin) "
 
 	" there were a "naked" coma in the instruction
 	if first_coma_break_pos != -1
-		if instruction !~? '^use' && instruction !~? '^class' " use ... statements and class delcarations should not be broken up by comas
+		if instruction !~? '^use' && instruction !~? '^class' " use ... statements and class declarations should not be broken up by comas
 			let pos = (-1 * first_coma_break_pos) + 1
 			let instruction = instruction[pos :]
 		endif
@@ -1311,7 +1311,7 @@ function! phpcomplete#GetCurrentInstruction(line_number, col_number, phpbegin) "
 		" clear everything up until the first (
 		let instruction = substitute(instruction, '^\(if\|while\|foreach\|for\)\s*(\s*', '', '')
 
-		" lets iterate trough the instruction until we can find the pair for the opening (
+		" lets iterate through the instruction until we can find the pair for the opening (
 		let i = 0
 		let depth = 1
 		while i < len(instruction)
@@ -1419,7 +1419,7 @@ function! phpcomplete#GetCallChainReturnType(classname_candidate, class_candidat
 						let parts = split(substitute(type, '^\\', '', ''), '\')
 						let class_candidate_namespace = join(parts[0:-2], '\')
 						let classname_candidate = parts[-1]
-						" check for renamed namepsace in imports
+						" check for renamed namespace in imports
 						if has_key(classstructure.imports, class_candidate_namespace)
 							let class_candidate_namespace = classstructure.imports[class_candidate_namespace].name
 						endif
@@ -2018,7 +2018,7 @@ function! phpcomplete#GetCachedClassContents(classlocation, class_name) " {{{
 			if getftime(classstructure.file) != classstructure.mtime
 				let valid = 0
 				" we could break here, but the time required for checking probably worth
-				" the the memory we can free by checking every file in the cached hirearchy
+				" the the memory we can free by checking every file in the cached hierarchy
 				call phpcomplete#ClearCachedClassContents(classstructure.file)
 			endif
 		endfor
@@ -2032,7 +2032,7 @@ function! phpcomplete#GetCachedClassContents(classlocation, class_name) " {{{
 			call remove(s:cache_classstructures, cache_key)
 			call phpcomplete#ClearCachedClassContents(full_file_path)
 
-			" fall trough for the read from files path
+			" fall through for the read from files path
 		endif
 	else
 		call phpcomplete#ClearCachedClassContents(full_file_path)
@@ -2141,7 +2141,7 @@ function! phpcomplete#GetClassContentsStructure(file_path, file_lines, class_nam
 			let l = lnum
 			let search_line = trait_line
 
-			" add lines from the file until theres no ';' in them
+			" add lines from the file until there's no ';' in them
 			while search_line !~? ';' && l > 0
 				" file lines are reversed so we need to go backwards
 				let l += 1
@@ -2573,7 +2573,7 @@ function! phpcomplete#GetCurrentNameSpace(file_lines) " {{{
 				let search_line = line
 				let use_line = line
 
-				" add lines from the file until theres no ';' in them
+				" add lines from the file until there's no ';' in them
 				while search_line !~? ';' && l > 0
 					" file lines are reversed so we need to go backwards
 					let l -= 1
@@ -2605,7 +2605,7 @@ function! phpcomplete#GetCurrentNameSpace(file_lines) " {{{
 			" find kind flags from tags or built in methods for the objects we extracted
 			" they can be either classes, interfaces or namespaces, no other thing is importable in php
 			for [key, import] in items(imports)
-				" if theres a \ in the name we have it's definitely not a built in thing, look for tags
+				" if there's a \ in the name we have it's definitely not a built in thing, look for tags
 				if import.name =~ '\\'
 					let patched_ctags_detected = 0
 					let [classname, namespace_for_classes] = phpcomplete#ExpandClassName(import.name, '\', {})
@@ -2662,10 +2662,10 @@ function! phpcomplete#GetCurrentNameSpace(file_lines) " {{{
 						let import['kind'] = 'i'
 						let import['builtin'] = 1
 					else
-						" or can be a tag with exactly matchign name
+						" or can be a tag with exactly matching name
 						let tags = phpcomplete#GetTaglist('^'.import['name'].'$')
 						for tag in tags
-							" search for the first matchin namespace, class, interface with no namespace
+							" search for the first matching namespace, class, interface with no namespace
 							if !has_key(tag, 'namespace') && (tag.kind == 'n' || tag.kind == 'c' || tag.kind == 'i' || tag.kind == 't')
 								call extend(import, tag)
 								let import['builtin'] = 0
@@ -2883,7 +2883,7 @@ for [ext, data] in items(php_builtin['functions'])
 	call extend(g:php_builtin_functions, data)
 endfor
 
-" Built in classs
+" Built in class
 let g:php_builtin_classes = {}
 for [ext, data] in items(php_builtin['classes'])
 	call extend(g:php_builtin_classes, data)
@@ -2901,10 +2901,10 @@ for [ext, data] in items(php_builtin['constants'])
 	call extend(g:php_constants, data)
 endfor
 
-" When the classname not found or found but the tags dosen't contain that
-" class we will try to complate any method of any builtin class. To speed up
+" When the classname not found or found but the tags doesn't contain that
+" class we will try to complete any method of any builtin class. To speed up
 " that lookup we compile a 'ClassName::MethodName':'info' dictionary from the
-" builtin class informations
+" builtin class information
 let g:php_builtin_object_functions = {}
 
 " When completing for 'everyting imaginable' (no class context, not a

runtime/autoload/python3complete.vim

@@ -173,7 +173,7 @@ class Completer(object):
                 pass
         if len(arg_text) == 0:
             # The doc string sometimes contains the function signature
-            #  this works for alot of C modules that are part of the
+            #  this works for a lot of C modules that are part of the
             #  standard library
             doc = func_obj.__doc__
             if doc:

runtime/autoload/pythoncomplete.vim

@@ -191,7 +191,7 @@ class Completer(object):
                 pass
         if len(arg_text) == 0:
             # The doc string sometimes contains the function signature
-            #  this works for alot of C modules that are part of the
+            #  this works for a lot of C modules that are part of the
             #  standard library
             doc = func_obj.__doc__
             if doc:

runtime/autoload/sqlcomplete.vim

@@ -17,7 +17,7 @@
 "       and complete it.
 "
 " Version 16.0 (Dec 2015)
-"     - NF: If reseting the cache and table, procedure or view completion
+"     - NF: If resetting the cache and table, procedure or view completion
 "           had been used via dbext, have dbext delete or recreate the 
 "           dictionary so that new objects are picked up for the 
 "           next completion.
@@ -554,7 +554,7 @@ function! sqlcomplete#PreCacheSyntax(...)
         let syn_group_arr = g:omni_sql_precache_syntax_groups
     endif
     " For each group specified in the list, precache all
-    " the sytnax items.
+    " the syntax items.
     if !empty(syn_group_arr)
         for group_name in syn_group_arr
             let syn_items = extend( syn_items, s:SQLCGetSyntaxList(group_name) )
@@ -577,7 +577,7 @@ function! sqlcomplete#ResetCacheSyntax(...)
         let syn_group_arr = g:omni_sql_precache_syntax_groups
     endif
     " For each group specified in the list, precache all
-    " the sytnax items.
+    " the syntax items.
     if !empty(syn_group_arr)
         for group_name in syn_group_arr
             let list_idx = index(s:syn_list, group_name, 0, &ignorecase)
@@ -617,7 +617,7 @@ function! sqlcomplete#DrillIntoTable()
     else
 	" If the popup is not visible, simple perform the normal
 	" key behaviour.
-	" Must use exec since they key must be preceeded by "\"
+	" Must use exec since the key must be preceded by "\"
 	" or feedkeys will simply push each character of the string
 	" rather than the "key press".
         exec 'call feedkeys("\'.g:ftplugin_sql_omni_key_right.'", "n")'
@@ -634,7 +634,7 @@ function! sqlcomplete#DrillOutOfColumns()
     else
 	" If the popup is not visible, simple perform the normal
 	" key behaviour.
-	" Must use exec since they key must be preceeded by "\"
+	" Must use exec since the key must be preceded by "\"
 	" or feedkeys will simply push each character of the string
 	" rather than the "key press".
         exec 'call feedkeys("\'.g:ftplugin_sql_omni_key_left.'", "n")'
@@ -843,7 +843,7 @@ function! s:SQLCGetColumns(table_name, list_type)
          let curline    = line(".")
          let curcol     = col(".")
 
-         " Do not let searchs wrap
+         " Do not let searches wrap
          setlocal nowrapscan
          " If . was entered, look at the word just before the .
          " We are looking for something like this:
@@ -863,7 +863,7 @@ function! s:SQLCGetColumns(table_name, list_type)
          " Search forward until one of the following:
          "     1.  Another select/update/delete statement
          "     2.  A ; at the end of a line (the delimiter)
-         "     3.  The end of the file (incase no delimiter)
+         "     3.  The end of the file (in case no delimiter)
          " Yank the visually selected text into the "y register.
          exec 'silent! normal! vl/\c\(\<select\>\|\<update\>\|\<delete\>\|;\s*$\|\%$\)'."\n".'"yy'
 

runtime/autoload/tar.vim

@@ -778,7 +778,7 @@ fun! tar#Vimuntar(...)
    elseif executable("gzip")
     silent exe "!gzip -d ".shellescape(tartail)
    else
-    echoerr "unable to decompress<".tartail."> on this sytem"
+    echoerr "unable to decompress<".tartail."> on this system"
     if simplify(curdir) != simplify(tarhome)
      " remove decompressed tarball, restore directory
 "     call Decho("delete(".tartail.".tar)")

runtime/autoload/tohtml.vim

@@ -693,7 +693,7 @@ func! tohtml#GetUserSettings() "{{{
     let user_settings = {}
 
     " Define the correct option if the old option name exists and we haven't
-    " already defined the correct one. Maybe I'll put out a warnig message about
+    " already defined the correct one. Maybe I'll put out a warning message about
     " this sometime and remove the old option entirely at some even later time,
     " but for now just silently accept the old option.
     if exists('g:use_xhtml') && !exists("g:html_use_xhtml")

runtime/autoload/xmlcomplete.vim

@@ -199,7 +199,7 @@ function! xmlcomplete#CompleteTags(findstart, base)
 	" 1. Events attributes
 	if context =~ '\s'
 
-		" If attr contains =\s*[\"'] we catched value of attribute
+		" If attr contains =\s*[\"'] we catch value of attribute
 		if attr =~ "=\s*[\"']" || attr =~ "=\s*$"
 			" Let do attribute specific completion
 			let attrname = matchstr(attr, '.*\ze\s*=')

runtime/autoload/zip.vim

@@ -81,7 +81,7 @@ fun! zip#Browse(zipfile)
   " sanity checks
   if !exists("*fnameescape")
    if &verbose > 1
-    echoerr "the zip plugin is not available (your vim doens't support fnameescape())"
+    echoerr "the zip plugin is not available (your vim doesn't support fnameescape())"
    endif
    return
   endif

runtime/compiler/fpc.vim

@@ -12,6 +12,6 @@ if exists(":CompilerSet") != 2		" older Vim always used :setlocal
   command -nargs=* CompilerSet setlocal <args>
 endif
 
-" NOTE: compiler must be runned with -vb to write whole source path, not only file
+" NOTE: compiler must be run with -vb to write whole source path, not only file
 " name.
 CompilerSet errorformat=%f(%l\\,%c)\ %m

runtime/compiler/tex.vim

@@ -18,7 +18,7 @@ endif
 if exists('b:tex_ignore_makefile') || exists('g:tex_ignore_makefile') ||
 			\(!filereadable('Makefile') && !filereadable('makefile'))
 	" If buffer-local variable 'tex_flavor' exists, it defines TeX flavor,
-	" otherwize the same for global variable with same name, else it will be
+	" otherwise the same for global variable with same name, else it will be
 	" LaTeX
 	if exists("b:tex_flavor")
 		let current_compiler = b:tex_flavor

runtime/doc/autocmd.txt

@@ -1,4 +1,4 @@
-*autocmd.txt*   For Vim version 8.2.  Last change: 2021 Aug 01
+*autocmd.txt*   For Vim version 8.2.  Last change: 2021 Oct 04
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -366,6 +366,8 @@ Name			triggered by ~
 |InsertCharPre|		when a character was typed in Insert mode, before
 			inserting it
 
+|ModeChanged|		after changing the mode
+
 |TextChanged|		after a change was made to the text in Normal mode
 |TextChangedI|		after a change was made to the text in Insert mode
 			when popup menu is not visible
@@ -925,7 +927,22 @@ MenuPopup			Just before showing the popup menu (under the
 					i	Insert
 					c	Command line
 					tl	Terminal
-							*OptionSet*
+							*ModeChanged*
+ModeChanged			After changing the mode. The pattern is
+				matched against `'old_mode:new_mode'`, for
+				example match against `i:*` to simulate
+				|InsertLeave|.
+				The following values of |v:event| are set:
+				   old_mode	The mode before it changed.
+				   new_mode	The new mode as also returned
+						by |mode()|.
+				When ModeChanged is triggered, old_mode will
+				have the value of new_mode when the event was
+				last triggered.
+				Usage example to use relative line numbers
+				when entering Visual mode: >
+	:autocmd ModeChanged *:v set relativenumber
+<							*OptionSet*
 OptionSet			After setting an option.  The pattern is
 				matched against the long option name.
 				|<amatch>| indicates what option has been set.
@@ -1485,6 +1502,13 @@ Example: >
 This prevents having the autocommands defined twice (e.g., after sourcing the
 .vimrc file again).
 
+						*FileExplorer*
+There is one group that is recognized by Vim: FileExplorer.  If this group
+exists Vim assumes that editing a directory is possible and will trigger a
+plugin that lists the files in that directory.  This is used by the |netrw|
+plugin.  This allows you to do: >
+	browse edit
+
 ==============================================================================
 9. Executing autocommands				*autocmd-execute*
 

runtime/doc/editing.txt

@@ -1,4 +1,4 @@
-*editing.txt*   For Vim version 8.2.  Last change: 2021 Jul 25
+*editing.txt*   For Vim version 8.2.  Last change: 2021 Oct 04
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1225,7 +1225,9 @@ If you want to always use ":confirm", set the 'confirm' option.
 			|:diffsplit|, |:diffpatch|, |:open|, |:pedit|,
 			|:redir|, |:source|, |:update|, |:visual|, |:vsplit|,
 			and |:qall| if 'confirm' is set.
-			{only in Win32, Athena, Motif, GTK and Mac GUI}
+			{only in Win32, Athena, Motif, GTK and Mac GUI, in
+			console `browse edit` works if the FileExplorer
+			autocommand group exists}
 			When ":browse" is not possible you get an error
 			message.  If the |+browse| feature is missing or the
 			{command} doesn't support browsing, the {command} is

runtime/doc/eval.txt

@@ -1,4 +1,4 @@
-*eval.txt*	For Vim version 8.2.  Last change: 2021 Aug 16
+*eval.txt*	For Vim version 8.2.  Last change: 2021 Oct 04
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -658,7 +658,7 @@ It is not necessary to use the "dict" attribute for a numbered function.
 
 If you get an error for a numbered function, you can find out what it is with
 a trick.  Assuming the function is 42, the command is: >
-	:function {42}
+	:function g:42
 
 
 Functions for Dictionaries ~
@@ -1417,7 +1417,7 @@ A string constant accepts these special characters:
 \U....	same as \u but allows up to 8 hex numbers.
 \b	backspace <BS>
 \e	escape <Esc>
-\f	formfeed <FF>
+\f	formfeed 0x0C
 \n	newline <NL>
 \r	return <CR>
 \t	tab <Tab>
@@ -1426,7 +1426,7 @@ A string constant accepts these special characters:
 \<xxx>	Special key named "xxx".  e.g. "\<C-W>" for CTRL-W.  This is for use
 	in mappings, the 0x80 byte is escaped.
 	To use the double quote character it must be escaped: "<M-\">".
-	Don't use <Char-xxxx> to get a utf-8 character, use \uxxxx as
+	Don't use <Char-xxxx> to get a UTF-8 character, use \uxxxx as
 	mentioned above.
 \<*xxx>	Like \<xxx> but prepends a modifier instead of including it in the
 	character.  E.g. "\<C-w>" is one character 0x17 while "\<*C-w>" is four
@@ -2469,6 +2469,7 @@ atan2({expr1}, {expr2})		Float	arc tangent of {expr1} / {expr2}
 balloon_gettext()		String	current text in the balloon
 balloon_show({expr})		none	show {expr} inside the balloon
 balloon_split({msg})		List	split {msg} as used for a balloon
+blob2list({blob})		List	convert {blob} into a list of numbers
 browse({save}, {title}, {initdir}, {default})
 				String	put up a file requester
 browsedir({title}, {initdir})	String	put up a directory requester
@@ -2515,7 +2516,7 @@ ch_setoptions({handle}, {options})
 ch_status({handle} [, {options}])
 				String	status of channel {handle}
 changenr()			Number	current change number
-char2nr({expr} [, {utf8}])	Number	ASCII/UTF8 value of first char in {expr}
+char2nr({expr} [, {utf8}])	Number	ASCII/UTF-8 value of first char in {expr}
 charclass({string})		Number	character class of {string}
 charcol({expr})			Number	column number of cursor or mark
 charidx({string}, {idx} [, {countcc}])
@@ -2721,7 +2722,8 @@ libcallnr({lib}, {func}, {arg})	Number	idem, but return a Number
 line({expr} [, {winid}])	Number	line nr of cursor, last line or mark
 line2byte({lnum})		Number	byte count of line {lnum}
 lispindent({lnum})		Number	Lisp indent for line {lnum}
-list2str({list} [, {utf8}])	String	turn numbers in {list} into a String
+list2blob({list})		Blob	turn {list} of numbers into a Blob
+list2str({list} [, {utf8}])	String	turn {list} of numbers into a String
 listener_add({callback} [, {buf}])
 				Number	add a callback to listen to changes
 listener_flush([{buf}])		none	invoke listener callbacks
@@ -2767,7 +2769,7 @@ mkdir({name} [, {path} [, {prot}]])
 mode([expr])			String	current editing mode
 mzeval({expr})			any	evaluate |MzScheme| expression
 nextnonblank({lnum})		Number	line nr of non-blank line >= {lnum}
-nr2char({expr} [, {utf8}])	String	single char with ASCII/UTF8 value {expr}
+nr2char({expr} [, {utf8}])	String	single char with ASCII/UTF-8 value {expr}
 or({expr}, {expr})		Number	bitwise OR
 pathshorten({expr} [, {len}])	String	shorten directory names in a path
 perleval({expr})		any	evaluate |Perl| expression
@@ -2785,7 +2787,7 @@ popup_getoptions({id})		Dict	get options of popup window {id}
 popup_getpos({id})		Dict	get position of popup window {id}
 popup_hide({id})		none	hide popup menu {id}
 popup_list()			List	get a list of window IDs of all popups
-popup_locate({row}, {col})	Number 	get window ID of popup at position
+popup_locate({row}, {col})	Number	get window ID of popup at position
 popup_menu({what}, {options})	Number	create a popup window used as a menu
 popup_move({id}, {options})	none	set position of popup window {id}
 popup_notification({what}, {options})
@@ -2897,7 +2899,7 @@ setenv({name}, {val})		none	set environment variable
 setfperm({fname}, {mode})	Number	set {fname} file permissions to {mode}
 setline({lnum}, {line})		Number	set line {lnum} to {line}
 setloclist({nr}, {list} [, {action}])
- 				Number	modify location list using {list}
+				Number	modify location list using {list}
 setloclist({nr}, {list}, {action}, {what})
 				Number	modify specific location list props
 setmatches({list} [, {win}])	Number	restore a list of matches
@@ -2957,7 +2959,7 @@ srand([{expr}])			List	get seed for |rand()|
 state([{what}])			String	current state of Vim
 str2float({expr} [, {quoted}])	Float	convert String to Float
 str2list({expr} [, {utf8}])	List	convert each character of {expr} to
-					ASCII/UTF8 value
+					ASCII/UTF-8 value
 str2nr({expr} [, {base} [, {quoted}]])
 				Number	convert String to Number
 strcharlen({expr})		Number	character length of the String {expr}
@@ -3355,6 +3357,17 @@ balloon_split({msg})					*balloon_split()*
 <		{only available when compiled with the |+balloon_eval_term|
 		feature}
 
+blob2list({blob})					*blob2list()*
+		Return a List containing the number value of each byte in Blob
+		{blob}.  Examples: >
+			blob2list(0z0102.0304)	returns [1, 2, 3, 4]
+			blob2list(0z)		returns []
+<		Returns an empty List on error.  |list2blob()| does the
+		opposite.
+
+		Can also be used as a |method|: >
+			GetBlob()->blob2list()
+
 							*browse()*
 browse({save}, {title}, {initdir}, {default})
 		Put up a file requester.  This only works when "has("browse")"
@@ -3643,7 +3656,7 @@ char2nr({string} [, {utf8}])					*char2nr()*
 		Example for "utf-8": >
 			char2nr("á")		returns 225
 			char2nr("á"[0])		returns 195
-<		With {utf8} set to TRUE, always treat as utf-8 characters.
+<		When {utf8} is TRUE, always treat as UTF-8 characters.
 		A combining character is a separate character.
 		|nr2char()| does the opposite.
 		To turn a string into a list of character numbers: >
@@ -3870,6 +3883,8 @@ complete_info([{what}])				*complete_info()*
 		   ""		     Not in completion mode
 		   "keyword"	     Keyword completion |i_CTRL-X_CTRL-N|
 		   "ctrl_x"	     Just pressed CTRL-X |i_CTRL-X|
+		   "scroll"	     Scrolling with |i_CTRL-X_CTRL-E| or
+				     |i_CTRL-X_CTRL-Y|
 		   "whole_line"	     Whole lines |i_CTRL-X_CTRL-L|
 		   "files"	     File names |i_CTRL-X_CTRL-F|
 		   "tags"	     Tags |i_CTRL-X_CTRL-]|
@@ -4268,7 +4283,7 @@ digraph_getlist([{listall}])				*digraph_getlist()*
 
 digraph_set({chars}, {digraph})				*digraph_set()* *E1205*
 		Add digraph {chars} to the list.  {chars} must be a string
-		with two characters.  {digraph} is a string with one utf-8
+		with two characters.  {digraph} is a string with one UTF-8
 		encoded character. Be careful, composing characters are NOT
 		ignored.  This function is similar to |:digraphs| command, but
 		useful to add digraphs start with a white space.
@@ -4864,14 +4879,17 @@ finddir({name} [, {path} [, {count}]])				*finddir()*
 		Find directory {name} in {path}.  Supports both downwards and
 		upwards recursive directory searches.  See |file-searching|
 		for the syntax of {path}.
+
 		Returns the path of the first found match.  When the found
 		directory is below the current directory a relative path is
 		returned.  Otherwise a full path is returned.
 		If {path} is omitted or empty then 'path' is used.
+
 		If the optional {count} is given, find {count}'s occurrence of
 		{name} in {path} instead of the first one.
 		When {count} is negative return all the matches in a |List|.
-		This is quite similar to the ex-command |:find|.
+
+		This is quite similar to the ex-command `:find`.
 		{only available when compiled with the |+file_in_path|
 		feature}
 
@@ -5094,7 +5112,7 @@ fullcommand({name})						*fullcommand()*
 		The string argument {name} may start with a `:` and can
 		include a [range], these are skipped and not returned.
 		Returns an empty string if a command doesn't exist or if it's
-		ambiguous (for user-defined functions).
+		ambiguous (for user-defined commands).
 
 		For example `fullcommand('s')`, `fullcommand('sub')`,
 		`fullcommand(':%substitute')` all return "substitute".
@@ -6124,6 +6142,7 @@ getreg([{regname} [, 1 [, {list}]]])			*getreg()*
 		(see |NL-used-for-Nul|).
 		When the register was not set an empty list is returned.
 
+		If {regname} is "", the unnamed register '"' is used.
 		If {regname} is not specified, |v:register| is used.
 		In |Vim9-script| {regname} must be one character.
 
@@ -6151,6 +6170,7 @@ getreginfo([{regname}])					*getreginfo()*
 
 		The {regname} argument is a string.  If {regname} is invalid
 		or not set, an empty Dictionary will be returned.
+		If {regname} is "" or "@", the unnamed register '"' is used.
 		If {regname} is not specified, |v:register| is used.
 		The returned Dictionary can be passed to |setreg()|.
 		In |Vim9-script| {regname} must be one character.
@@ -6166,8 +6186,9 @@ getregtype([{regname}])					*getregtype()*
 		    "<CTRL-V>{width}"	for |blockwise-visual| text
 		    ""			for an empty or unknown register
 		<CTRL-V> is one character with value 0x16.
-		The {regname} argument is a string.  If {regname} is not
-		specified, |v:register| is used.
+		The {regname} argument is a string.  If {regname} is "", the
+		unnamed register '"' is used.  If {regname} is not specified,
+		|v:register| is used.
 		In |Vim9-script| {regname} must be one character.
 
 		Can also be used as a |method|: >
@@ -7205,6 +7226,19 @@ lispindent({lnum})					*lispindent()*
 		Can also be used as a |method|: >
 			GetLnum()->lispindent()
 
+list2blob({list})					*list2blob()*
+		Return a Blob concatenating all the number values in {list}.
+		Examples: >
+			list2blob([1, 2, 3, 4])	returns 0z01020304
+			list2blob([])		returns 0z
+<		Returns an empty Blob on error.  If one of the numbers is
+		negative or more than 255 error *E1239* is given.
+
+		|blob2list()| does the opposite.
+
+		Can also be used as a |method|: >
+			GetList()->list2blob()
+
 list2str({list} [, {utf8}])				*list2str()*
 		Convert each number in {list} to a character string can
 		concatenate them all.  Examples: >
@@ -7215,8 +7249,8 @@ list2str({list} [, {utf8}])				*list2str()*
 <		|str2list()| does the opposite.
 
 		When {utf8} is omitted or zero, the current 'encoding' is used.
-		With {utf8} is 1, always return utf-8 characters.
-		With utf-8 composing characters work as expected: >
+		When {utf8} is TRUE, always return UTF-8 characters.
+		With UTF-8 composing characters work as expected: >
 			list2str([97, 769])	returns "á"
 <
 		Can also be used as a |method|: >
@@ -7458,7 +7492,7 @@ maparg({name} [, {mode} [, {abbr} [, {dict}]]])			*maparg()*
 		  "lhs"	     The {lhs} of the mapping as it would be typed
 		  "lhsraw"   The {lhs} of the mapping as raw bytes
 		  "lhsrawalt" The {lhs} of the mapping as raw bytes, alternate
-		  	      form, only present when it differs from "lhsraw"
+			      form, only present when it differs from "lhsraw"
 		  "rhs"	     The {rhs} of the mapping as typed.
 		  "silent"   1 for a |:map-silent| mapping, else 0.
 		  "noremap"  1 if the {rhs} of the mapping is not remappable.
@@ -7906,7 +7940,8 @@ max({expr})	Return the maximum value of all items in {expr}. Example: >
 menu_info({name} [, {mode}])				*menu_info()*
 		Return information about the specified menu {name} in
 		mode {mode}. The menu name should be specified without the
-		shortcut character ('&').
+		shortcut character ('&'). If {name} is "", then the top-level
+		menu names are returned.
 
 		{mode} can be one of these strings:
 			"n"	Normal
@@ -7957,6 +7992,20 @@ menu_info({name} [, {mode}])				*menu_info()*
 		Examples: >
 			:echo menu_info('Edit.Cut')
 			:echo menu_info('File.Save', 'n')
+
+			" Display the entire menu hierarchy in a buffer
+			func ShowMenu(name, pfx)
+			  let m = menu_info(a:name)
+			  call append(line('$'), a:pfx .. m.display)
+			  for child in m->get('submenus', [])
+			    call ShowMenu(a:name .. '.' .. escape(child, '.'),
+							\ a:pfx .. '    ')
+			  endfor
+			endfunc
+			new
+			for topmenu in menu_info('').submenus
+			  call ShowMenu(topmenu, '')
+			endfor
 <
 		Can also be used as a |method|: >
 			GetMenuName()->menu_info('v')
@@ -8014,7 +8063,7 @@ mode([expr])	Return a string that indicates the current mode.
 		returned, otherwise only the first letter is returned.
 		Also see |state()|.
 
-		   n	    Normal, Terminal-Normal
+		   n	    Normal
 		   no	    Operator-pending
 		   nov	    Operator-pending (forced characterwise |o_v|)
 		   noV	    Operator-pending (forced linewise |o_V|)
@@ -8023,23 +8072,25 @@ mode([expr])	Return a string that indicates the current mode.
 		   niI	    Normal using |i_CTRL-O| in |Insert-mode|
 		   niR	    Normal using |i_CTRL-O| in |Replace-mode|
 		   niV	    Normal using |i_CTRL-O| in |Virtual-Replace-mode|
+		   nt	    Terminal-Normal (insert goes to Terminal-Job mode)
 		   v	    Visual by character
+		   vs	    Visual by character using |v_CTRL-O| in Select mode
 		   V	    Visual by line
+		   Vs	    Visual by line using |v_CTRL-O| in Select mode
 		   CTRL-V   Visual blockwise
+		   CTRL-Vs  Visual blockwise using |v_CTRL-O| in Select mode
 		   s	    Select by character
 		   S	    Select by line
 		   CTRL-S   Select blockwise
-		   vs	    Visual by character using |v_CTRL-O| from
-				Select mode
-		   Vs	    Visual by line using |v_CTRL-O| from Select mode
-		   CTRL-Vs  Visual blockwise using |v_CTRL-O| from Select mode
 		   i	    Insert
 		   ic	    Insert mode completion |compl-generic|
 		   ix	    Insert mode |i_CTRL-X| completion
 		   R	    Replace |R|
 		   Rc	    Replace mode completion |compl-generic|
-		   Rv	    Virtual Replace |gR|
 		   Rx	    Replace mode |i_CTRL-X| completion
+		   Rv	    Virtual Replace |gR|
+		   Rvc	    Virtual Replace mode completion |compl-generic|
+		   Rvx	    Virtual Replace mode |i_CTRL-X| completion
 		   c	    Command-line editing
 		   cv	    Vim Ex mode |gQ|
 		   ce	    Normal Ex mode |Q|
@@ -8048,6 +8099,7 @@ mode([expr])	Return a string that indicates the current mode.
 		   r?	    A |:confirm| query of some sort
 		   !	    Shell or external command is executing
 		   t	    Terminal-Job mode: keys go to the job
+
 		This is useful in the 'statusline' option or when used
 		with |remote_expr()| In most other places it always returns
 		"c" or "n".
@@ -8102,7 +8154,7 @@ nr2char({expr} [, {utf8}])				*nr2char()*
 <		When {utf8} is omitted or zero, the current 'encoding' is used.
 		Example for "utf-8": >
 			nr2char(300)		returns I with bow character
-<		With {utf8} set to 1, always return utf-8 characters.
+<		When {utf8} is TRUE, always return UTF-8 characters.
 		Note that a NUL character in the file is specified with
 		nr2char(10), because NULs are represented with newline
 		characters.  nr2char(0) is a real NUL and terminates the
@@ -9583,7 +9635,7 @@ setcellwidths({list})					*setcellwidths()*
 		tells Vim how wide characters are, counted in screen cells.
 		This overrides 'ambiwidth'.  Example: >
 		   setcellwidths([[0xad, 0xad, 1],
-		   		\ [0x2194, 0x2199, 2]])
+				\ [0x2194, 0x2199, 2]])
 
 <					*E1109* *E1110* *E1111* *E1112* *E1113*
 		The {list} argument is a list of lists with each three
@@ -10497,7 +10549,7 @@ state([{what}])						*state()*
 		    w	blocked on waiting, e.g. ch_evalexpr(), ch_read() and
 			ch_readraw() when reading json
 		    S	not triggering SafeState or SafeStateAgain, e.g. after
-		    	|f| or a count
+			|f| or a count
 		    c	callback invoked, including timer (repeats for
 			recursiveness up to "ccc")
 		    s	screen has scrolled for messages
@@ -10532,8 +10584,8 @@ str2list({string} [, {utf8}])					*str2list()*
 <		|list2str()| does the opposite.
 
 		When {utf8} is omitted or zero, the current 'encoding' is used.
-		With {utf8} set to 1, always treat the String as utf-8
-		characters.  With utf-8 composing characters are handled
+		When {utf8} is TRUE, always treat the String as UTF-8
+		characters.  With UTF-8 composing characters are handled
 		properly: >
 			str2list("á")		returns [97, 769]
 
@@ -12049,6 +12101,7 @@ There are three types of features:
 1.  Features that are only supported when they have been enabled when Vim
     was compiled |+feature-list|.  Example: >
 	:if has("cindent")
+<							*gui_running*
 2.  Features that are only supported when certain conditions have been met.
     Example: >
 	:if has("gui_running")
@@ -13067,7 +13120,7 @@ text...
 			literal then the items also cannot be changed: >
 				const ll = [1, 2, 3]
 				let ll[1] = 5  " Error!
-< 			Nested references are not locked: >
+<			Nested references are not locked: >
 				let lvar = ['a']
 				const lconst = [0, lvar]
 				let lconst[0] = 2  " Error!
@@ -13121,8 +13174,8 @@ text...
 			Example with [depth] 0: >
 				let mylist = [1, 2, 3]
 				lockvar 0 mylist
-				let mylist[0] = 77   	" OK
-				call add(mylist, 4]  	" OK
+				let mylist[0] = 77	" OK
+				call add(mylist, 4]	" OK
 				let mylist = [7, 8, 9]  " Error!
 <								*E743*
 			For unlimited depth use [!] and omit [depth].

runtime/doc/filetype.txt

@@ -1,4 +1,4 @@
-*filetype.txt*  For Vim version 8.2.  Last change: 2021 Mar 11
+*filetype.txt*  For Vim version 8.2.  Last change: 2021 Sep 22
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -545,6 +545,14 @@ One command, :DiffGitCached, is provided to show a diff of the current commit
 in the preview window.  It is equivalent to calling "git diff --cached" plus
 any arguments given to the command.
 
+GPROF							*ft-gprof-plugin*
+
+The gprof filetype plugin defines a mapping <C-]> to jump from a function
+entry in the gprof flat profile or from a function entry in the call graph
+to the details of that function in the call graph.
+
+The mapping can be disabled with: >
+	let g:no_gprof_maps = 1
 
 MAIL							*ft-mail-plugin*
 

runtime/doc/if_lua.txt

@@ -227,14 +227,14 @@ Vim evaluation and command execution, and others.
                                                         *lua-vim-variables*
 The Vim editor global dictionaries |g:| |w:| |b:| |t:| |v:| can be accessed
 from Lua conveniently and idiomatically by referencing the `vim.*` Lua tables
-described below. In this way you can easily read and modify global Vimscript
+described below. In this way you can easily read and modify global Vim script
 variables from Lua.
 
 Example: >
 
-    vim.g.foo = 5     -- Set the g:foo Vimscript variable.
-    print(vim.g.foo)  -- Get and print the g:foo Vimscript variable.
-    vim.g.foo = nil   -- Delete (:unlet) the Vimscript variable.
+    vim.g.foo = 5     -- Set the g:foo Vim script variable.
+    print(vim.g.foo)  -- Get and print the g:foo Vim script variable.
+    vim.g.foo = nil   -- Delete (:unlet) the Vim script variable.
 
 vim.g                                                   *vim.g*
         Global (|g:|) editor variables.

runtime/doc/index.txt

@@ -1,4 +1,4 @@
-*index.txt*     For Vim version 8.2.  Last change: 2021 Aug 27
+*index.txt*     For Vim version 8.2.  Last change: 2021 Aug 31
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/insert.txt

@@ -1,4 +1,4 @@
-*insert.txt*    For Vim version 8.2.  Last change: 2021 Aug 27
+*insert.txt*    For Vim version 8.2.  Last change: 2021 Aug 31
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/intro.txt

@@ -1,4 +1,4 @@
-*intro.txt*     For Vim version 8.2.  Last change: 2020 Dec 29
+*intro.txt*     For Vim version 8.2.  Last change: 2021 Sep 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -421,7 +421,6 @@ notation	meaning		    equivalent	decimal value(s)	~
 <Tab>		tab			CTRL-I	  9	*tab* *Tab*
 							*linefeed*
 <NL>		linefeed		CTRL-J	 10 (used for <Nul>)
-<FF>		formfeed		CTRL-L	 12	*formfeed*
 <CR>		carriage return		CTRL-M	 13	*carriage-return*
 <Return>	same as <CR>				*<Return>*
 <Enter>		same as <CR>				*<Enter>*

runtime/doc/map.txt

@@ -1,4 +1,4 @@
-*map.txt*       For Vim version 8.2.  Last change: 2021 Aug 05
+*map.txt*       For Vim version 8.2.  Last change: 2021 Sep 12
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1368,6 +1368,10 @@ See |:verbose-cmd| for more information.
 :delc[ommand] {cmd}				*:delc* *:delcommand* *E184*
 			Delete the user-defined command {cmd}.
 
+:delc[ommand] -buffer {cmd}					*E1237*
+			Delete the user-defined command {cmd} that was defined
+			for the current buffer.
+
 :comc[lear]						*:comc* *:comclear*
 			Delete all user-defined commands.
 

runtime/doc/mbyte.txt

@@ -1,4 +1,4 @@
-*mbyte.txt*     For Vim version 8.2.  Last change: 2021 Apr 05
+*mbyte.txt*     For Vim version 8.2.  Last change: 2021 Oct 04
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar et al.
@@ -1132,7 +1132,7 @@ This file explains what characters are available in UTF-8 and CP1255 encodings,
 and what the keymaps are to get those characters:
 
 glyph   encoding	   keymap ~
-Char   utf-8 cp1255  hebrew  hebrewp  name ~
+Char UTF-8 cp1255  hebrew  hebrewp  name ~
 א    0x5d0  0xe0     t	      a     'alef
 ב    0x5d1  0xe1     c	      b     bet
 ג    0x5d2  0xe2     d	      g     gimel
@@ -1185,11 +1185,11 @@ Vowel marks and special punctuation:
 ױ    0x5f1  0xd5     VY      VY   vav-yod
 ײ    0x5f2  0xd6     YY      YY   yod-yod
 
-The following are only available in utf-8
+The following are only available in UTF-8
 
 Cantillation marks:
 glyph
-Char utf-8 hebrew name
+Char UTF-8 hebrew name
 ב֑    0x591   C:   etnahta
 ב֒    0x592   Cs   segol
 ב֓    0x593   CS   shalshelet
@@ -1300,7 +1300,7 @@ ASCII.   On MS-Windows UTF-16 is also used (previously UCS-2), which uses
 internally.
 
 Vim has comprehensive UTF-8 support.  It works well in:
-- xterm with utf-8 support enabled
+- xterm with UTF-8 support enabled
 - Athena, Motif and GTK GUI
 - MS-Windows GUI
 - several other platforms
@@ -1313,13 +1313,13 @@ is no longer relevant in the GTK+ 2 GUI.
 							*bom-bytes*
 When reading a file a BOM (Byte Order Mark) can be used to recognize the
 Unicode encoding:
-	EF BB BF     utf-8
-	FE FF        utf-16 big endian
-	FF FE        utf-16 little endian
-	00 00 FE FF  utf-32 big endian
-	FF FE 00 00  utf-32 little endian
+	EF BB BF     UTF-8
+	FE FF        UTF-16 big endian
+	FF FE        UTF-16 little endian
+	00 00 FE FF  UTF-32 big endian
+	FF FE 00 00  UTF-32 little endian
 
-Utf-8 is the recommended encoding.  Note that it's difficult to tell utf-16
+UTF-8 is the recommended encoding.  Note that it's difficult to tell utf-16
 and utf-32 apart.  Utf-16 is often used on MS-Windows, utf-32 is not
 widespread as file format.
 
@@ -1365,8 +1365,8 @@ Useful commands:
 
 STARTING VIM
 
-If your current locale is in an utf-8 encoding, Vim will automatically start
-in utf-8 mode.
+If your current locale is in an UTF-8 encoding, Vim will automatically start
+in UTF-8 mode.
 
 If you are using another locale: >
 
@@ -1399,10 +1399,10 @@ Motif.  Use the ":hi Menu font={fontname}" command for this. |:highlight|
 TYPING UTF-8						*utf-8-typing*
 
 If you are using X-Windows, you should find an input method that supports
-utf-8.
+UTF-8.
 
-If your system does not provide support for typing utf-8, you can use the
-'keymap' feature.  This allows writing a keymap file, which defines a utf-8
+If your system does not provide support for typing UTF-8, you can use the
+'keymap' feature.  This allows writing a keymap file, which defines a UTF-8
 character as a sequence of ASCII characters.  See |mbyte-keymap|.
 
 Another method is to set the current locale to the language you want to use

runtime/doc/options.txt

@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 8.2.  Last change: 2021 Aug 28
+*options.txt*	For Vim version 8.2.  Last change: 2021 Sep 21
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -4939,16 +4939,25 @@ A jump table for the options with a short description can be found at |Q_op|.
 							*lcs-space*
 	  space:c	Character to show for a space.  When omitted, spaces
 			are left blank.
+							*lcs-multispace*
+	  multispace:c...
+	 		One or more characters to use cyclically to show for
+	 		multiple consecutive spaces.  Overrides the "space"
+			setting, except for single spaces.  When omitted, the
+			"space" setting is used.  For example,
+			`:set listchars=multispace:---+` shows ten consecutive
+			spaces as:
+				---+---+--
 							*lcs-lead*
 	  lead:c	Character to show for leading spaces.  When omitted,
-			leading spaces are blank.  Overrides the "space"
-			setting for leading spaces.  You can combine it with
-			"tab:", for example: >
+			leading spaces are blank.  Overrides the "space" and
+			"multispace" settings for leading spaces.  You can
+			combine it with "tab:", for example: >
 				:set listchars+=tab:>-,lead:.
 <							*lcs-trail*
 	  trail:c	Character to show for trailing spaces.  When omitted,
-			trailing spaces are blank.  Overrides the "space"
-			setting for trailing spaces.
+			trailing spaces are blank.  Overrides the "space" and
+			"multispace" settings for trailing spaces.
 							*lcs-extends*
 	  extends:c	Character to show in the last column, when 'wrap' is
 			off and the line continues beyond the right of the
@@ -4974,7 +4983,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	    :set lcs=tab:>-,eol:<,nbsp:%
 	    :set lcs=extends:>,precedes:<
 <	The "NonText" highlighting will be used for "eol", "extends" and
-	"precedes".  "SpecialKey" for "nbsp", "space", "tab" and "trail".
+	"precedes".  "SpecialKey" will be used for "tab", "nbsp", "space",
+	"multispace", "lead" and "trail".
 	|hl-NonText| |hl-SpecialKey|
 
 			*'lpl'* *'nolpl'* *'loadplugins'* *'noloadplugins'*
@@ -7176,6 +7186,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	If the name "cjk" is included East Asian characters are excluded from
 	spell checking.  This is useful when editing text that also has Asian
 	words.
+	Note that the "medical" dictionary does not exist, it is just an
+	example of a longer name.
 							*E757*
 	As a special case the name of a .spl file can be given as-is.  The
 	first "_xx" in the name is removed and used as the region name
@@ -8769,8 +8781,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	More info here: |cmdline-completion|.
 	The character is not recognized when used inside a macro.  See
 	'wildcharm' for that.
+	Some keys will not work, such as CTRL-C, <CR> and Enter.
 	Although 'wc' is a number option, you can set it to a special key: >
-		:set wc=<Esc>
+		:set wc=<Tab>
 <	NOTE: This option is set to the Vi default value when 'compatible' is
 	set and to the Vim default value when 'compatible' is reset.
 

runtime/doc/print.txt

@@ -1,4 +1,4 @@
-*print.txt*     For Vim version 8.2.  Last change: 2020 Aug 15
+*print.txt*     For Vim version 8.2.  Last change: 2021 Oct 04
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -717,7 +717,7 @@ There are a couple of points to bear in mind:
 ==============================================================================
 8. Formfeed Characters					*printing-formfeed*
 
-By default Vim does not do any special processing of |formfeed| control
+By default Vim does not do any special processing of formfeed control
 characters.  Setting the 'printoptions' formfeed item will make Vim recognize
 formfeed characters and continue printing the current line at the beginning
 of the first line on a new page.  The use of formfeed characters provides

runtime/doc/repeat.txt

@@ -1,4 +1,4 @@
-*repeat.txt*    For Vim version 8.2.  Last change: 2021 Jun 27
+*repeat.txt*    For Vim version 8.2.  Last change: 2021 Sep 09
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -893,8 +893,12 @@ DEFINING BREAKPOINTS
 		Sets a breakpoint, that will break whenever the {expression}
 		evaluates to a different value. Example: >
 			:breakadd expr g:lnum
-
 <		Will break, whenever the global variable lnum changes.
+
+		Errors in evaluation are suppressed, you can use the name of a
+		variable that does not exist yet.  This also means you will
+		not notice anything if the expression has a mistake.
+
 		Note if you watch a |script-variable| this will break
 		when switching scripts, since the script variable is only
 		valid in the script where it has been defined and if that

runtime/doc/sign.txt

@@ -520,6 +520,7 @@ sign_jump({id}, {group}, {buf})
 		{buf} and position the cursor at sign {id} in group {group}.
 		This is similar to the |:sign-jump| command.
 
+		If {group} is an empty string, then the global group is used.
 		For the use of {buf}, see |bufname()|.
 
 		Returns the line number of the sign. Returns -1 if the

runtime/doc/tags

@@ -2321,6 +2321,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :cope	quickfix.txt	/*:cope*
 :copen	quickfix.txt	/*:copen*
 :copy	change.txt	/*:copy*
+:count_quit	windows.txt	/*:count_quit*
 :cp	quickfix.txt	/*:cp*
 :cpf	quickfix.txt	/*:cpf*
 :cpfile	quickfix.txt	/*:cpfile*
@@ -3502,6 +3503,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :y	change.txt	/*:y*
 :yank	change.txt	/*:yank*
 :z	various.txt	/*:z*
+:z!	various.txt	/*:z!*
 :z#	various.txt	/*:z#*
 :~	change.txt	/*:~*
 ;	motion.txt	/*;*
@@ -3987,6 +3989,8 @@ E123	eval.txt	/*E123*
 E1231	map.txt	/*E1231*
 E1232	eval.txt	/*E1232*
 E1233	eval.txt	/*E1233*
+E1237	map.txt	/*E1237*
+E1239	eval.txt	/*E1239*
 E124	eval.txt	/*E124*
 E125	eval.txt	/*E125*
 E126	eval.txt	/*E126*
@@ -4939,6 +4943,7 @@ FileChangedRO	autocmd.txt	/*FileChangedRO*
 FileChangedShell	autocmd.txt	/*FileChangedShell*
 FileChangedShellPost	autocmd.txt	/*FileChangedShellPost*
 FileEncoding	autocmd.txt	/*FileEncoding*
+FileExplorer	autocmd.txt	/*FileExplorer*
 FileReadCmd	autocmd.txt	/*FileReadCmd*
 FileReadPost	autocmd.txt	/*FileReadPost*
 FileReadPre	autocmd.txt	/*FileReadPre*
@@ -5013,6 +5018,7 @@ Macintosh	os_mac.txt	/*Macintosh*
 Mark	motion.txt	/*Mark*
 MenuPopup	autocmd.txt	/*MenuPopup*
 MiNT	os_mint.txt	/*MiNT*
+ModeChanged	autocmd.txt	/*ModeChanged*
 Moolenaar	intro.txt	/*Moolenaar*
 MorphOS	os_amiga.txt	/*MorphOS*
 Motif	gui_x11.txt	/*Motif*
@@ -5551,10 +5557,12 @@ beval_winnr-variable	eval.txt	/*beval_winnr-variable*
 binary-number	eval.txt	/*binary-number*
 bitwise-function	usr_41.txt	/*bitwise-function*
 blob	eval.txt	/*blob*
+blob-functions	usr_41.txt	/*blob-functions*
 blob-identity	eval.txt	/*blob-identity*
 blob-index	eval.txt	/*blob-index*
 blob-literal	eval.txt	/*blob-literal*
 blob-modification	eval.txt	/*blob-modification*
+blob2list()	eval.txt	/*blob2list()*
 blockwise-examples	visual.txt	/*blockwise-examples*
 blockwise-operators	visual.txt	/*blockwise-operators*
 blockwise-register	change.txt	/*blockwise-register*
@@ -5920,6 +5928,7 @@ compl-keyword	insert.txt	/*compl-keyword*
 compl-omni	insert.txt	/*compl-omni*
 compl-omni-filetypes	insert.txt	/*compl-omni-filetypes*
 compl-spelling	insert.txt	/*compl-spelling*
+compl-stop	insert.txt	/*compl-stop*
 compl-tag	insert.txt	/*compl-tag*
 compl-vim	insert.txt	/*compl-vim*
 compl-whole-line	insert.txt	/*compl-whole-line*
@@ -6542,7 +6551,6 @@ format-bullet-list	tips.txt	/*format-bullet-list*
 format-comments	change.txt	/*format-comments*
 format-formatexpr	change.txt	/*format-formatexpr*
 formatting	change.txt	/*formatting*
-formfeed	intro.txt	/*formfeed*
 fortran.vim	syntax.txt	/*fortran.vim*
 friendship	intro.txt	/*friendship*
 frombook	usr_01.txt	/*frombook*
@@ -6601,6 +6609,7 @@ ft-fortran-plugin	filetype.txt	/*ft-fortran-plugin*
 ft-fortran-syntax	syntax.txt	/*ft-fortran-syntax*
 ft-fvwm-syntax	syntax.txt	/*ft-fvwm-syntax*
 ft-gitcommit-plugin	filetype.txt	/*ft-gitcommit-plugin*
+ft-gprof-plugin	filetype.txt	/*ft-gprof-plugin*
 ft-groff-syntax	syntax.txt	/*ft-groff-syntax*
 ft-gsp-syntax	syntax.txt	/*ft-gsp-syntax*
 ft-haskell-syntax	syntax.txt	/*ft-haskell-syntax*
@@ -7197,6 +7206,7 @@ gui-x11-printing	gui_x11.txt	/*gui-x11-printing*
 gui-x11-start	gui_x11.txt	/*gui-x11-start*
 gui-x11-various	gui_x11.txt	/*gui-x11-various*
 gui.txt	gui.txt	/*gui.txt*
+gui_running	eval.txt	/*gui_running*
 gui_w32.txt	gui_w32.txt	/*gui_w32.txt*
 gui_x11.txt	gui_x11.txt	/*gui_x11.txt*
 guifontwide_gtk	gui.txt	/*guifontwide_gtk*
@@ -7479,6 +7489,7 @@ i_CTRL-X_CTRL-T	insert.txt	/*i_CTRL-X_CTRL-T*
 i_CTRL-X_CTRL-U	insert.txt	/*i_CTRL-X_CTRL-U*
 i_CTRL-X_CTRL-V	insert.txt	/*i_CTRL-X_CTRL-V*
 i_CTRL-X_CTRL-Y	insert.txt	/*i_CTRL-X_CTRL-Y*
+i_CTRL-X_CTRL-Z	insert.txt	/*i_CTRL-X_CTRL-Z*
 i_CTRL-X_CTRL-]	insert.txt	/*i_CTRL-X_CTRL-]*
 i_CTRL-X_index	index.txt	/*i_CTRL-X_index*
 i_CTRL-X_s	insert.txt	/*i_CTRL-X_s*
@@ -7697,6 +7708,7 @@ lcs-conceal	options.txt	/*lcs-conceal*
 lcs-eol	options.txt	/*lcs-eol*
 lcs-extends	options.txt	/*lcs-extends*
 lcs-lead	options.txt	/*lcs-lead*
+lcs-multispace	options.txt	/*lcs-multispace*
 lcs-nbsp	options.txt	/*lcs-nbsp*
 lcs-precedes	options.txt	/*lcs-precedes*
 lcs-space	options.txt	/*lcs-space*
@@ -7731,6 +7743,7 @@ list-identity	eval.txt	/*list-identity*
 list-index	eval.txt	/*list-index*
 list-modification	eval.txt	/*list-modification*
 list-repeat	windows.txt	/*list-repeat*
+list2blob()	eval.txt	/*list2blob()*
 list2str()	eval.txt	/*list2str()*
 listener_add()	eval.txt	/*listener_add()*
 listener_flush()	eval.txt	/*listener_flush()*

runtime/doc/textprop.txt

@@ -160,7 +160,7 @@ prop_add({lnum}, {col}, {props})
 
 		Can also be used as a |method|: >
 			GetLnum()->prop_add(col, props)
-
+<
 						*prop_add_list()*
 prop_add_list({props}, [[{lnum}, {col}, {end-lnum}, {end-col}], ...])
 		Similar to prop_add(), but attaches a text property at

runtime/doc/todo.txt

@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 8.2.  Last change: 2021 Aug 25
+*todo.txt*      For Vim version 8.2.  Last change: 2021 Sep 22
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -38,13 +38,17 @@ browser use: https://github.com/vim/vim/issues/1234
 							*known-bugs*
 -------------------- Known bugs and current work -----------------------
 
+Flaky test op Windows:
+From test_vim9_script.vim:
+    Found errors in Test_no_unknown_error_after_error():
+    command line..script D:/a/vim/vim/src2/testdir/runtest.vim[486]..function RunTheTest[44]..Test_no_unknown_error_after_error line 22: Expected 'E1012:' but got 'E684: list index out of range: 0': so Xdef
+
 Vim9 - Make everything work:
-- use CheckLegacyAndVim9Success(lines) in many more places
 - Check TODO items in vim9compile.c and vim9execute.c
+- use CheckLegacyAndVim9Success(lines) in many more places
 - For builtin functions using tv_get_string*() use check_for_string() to be
   more strict about the argument type (not a bool).
     done: balloon_()
-- Disallow using numbered function with "g:123" in Vim9 script?  #8760
 - Check many more builtin function arguments at compile time.
     map() could check that the return type of the function argument matches
     the type of the list or dict member. (#8092)
@@ -223,6 +227,9 @@ Need to handle extra bytes.
 Test_communicate_ipv6(): is flaky on many systems
 Fails in line 64 of Ch_communicate, no exception is thrown.
 
+Patch for Template string: #4634
+Have another look at the implementation.
+
 Rename getdigraphlist -> digraph_getlist() etc.
 
 Valgrind reports memory leaks in test_options.
@@ -259,9 +266,6 @@ Problem that a previous silent ":throw" causes a following try/catch not to
 work. (ZyX, 2013 Sep 28) With examples: (Malcolm Rowe, 2015 Dec 24)
 Also see #8487 for an example.
 
-Patch for Template string: #4634
-Have another look at the implementation.
-
 Patch to implement the vimtutor with a plugin: #6414
 Was originally written by Felipe Morales.
 
@@ -364,10 +368,6 @@ autocommands for the buffer lifecycle:
     BufIsRenamed  (after buffer ID gets another name)
 The buffer list and windows are locked, no changes possible
 
-Add a ModeChanged autocommand that has an argument indicating the old and new
-mode, as what's returned from mode().  Also used for switching Terminal mode.
-#8360, #7863, #7363
-
 Matchparen doesn't remove highlight after undo. (#7054)
 Is OK when syntax HL is active.
 
@@ -429,6 +429,9 @@ undo result wrong: Masato Nishihata, #4798
 After recovering from a swap file the undofile should not be used, it causes
 corruption.  (#6631)
 
+When the computer crashes while writing the undofile, the contents may be
+lost.  Write to a temp file, fsync and rename. (#8879)
+
 When 'lazyredraw' is set sometimes the title is not updated.
 (Jason Franklin, 2020 Feb 3)  Looks like a race condition.
 
@@ -1039,6 +1042,9 @@ matchit hasn't been maintained for a long time.  #955.
 
 Problem with 'delcombine'. (agguser, 2017 Nov 10, #2313)
 
+'delcombine' does not work for the command line. (Tony Mechelynck, 2009 Jul
+20)
+
 MS-Windows: buffer completion doesn't work when using backslash (or slash)
 for a path separator. (xtal8, #2201)
 
@@ -2300,9 +2306,6 @@ for GTK clipboard.  Avoid requirement for iconv.
 
 Now that colnr_T is int instead of unsigned, more type casts can be removed.
 
-'delcombine' does not work for the command line. (Tony Mechelynck, 2009 Jul
-20)
-
 Don't load macmap.vim on startup, turn it into a plugin. (Ron Aaron,
 2009 Apr 7)  Reminder Apr 14.
 
@@ -4843,7 +4846,6 @@ Autocommands:
     command used dos fileformat.  Same for 'fileencoding'.
 -   Add events to autocommands:
     Error	    - When an error happens
-    ModeChange	    - after changing mode (before waiting for a char)
     VimLeaveCheck    - Before Vim decides to exit, so that it can be cancelled
 		      when exiting isn't a good idea.
     CursorHoldC     - CursorHold while command-line editing

runtime/doc/usr_41.txt

@@ -1,4 +1,4 @@
-*usr_41.txt*	For Vim version 8.2.  Last change: 2021 Aug 08
+*usr_41.txt*	For Vim version 8.2.  Last change: 2021 Sep 10
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -723,6 +723,10 @@ Floating point computation:				*float-functions*
 	isinf()			check for infinity
 	isnan()			check for not a number
 
+Blob manipulation:					*blob-functions*
+	blob2list()		get a list of numbers from a blob
+	list2blob()		get a blob from a list of numbers
+
 Other computation:					*bitwise-function*
 	and()			bitwise AND
 	invert()		bitwise invert
@@ -1449,6 +1453,8 @@ is a List with arguments.
 Function references are most useful in combination with a Dictionary, as is
 explained in the next section.
 
+More information about defining your own functions here: |user-functions|.
+
 ==============================================================================
 *41.8*	Lists and Dictionaries
 

runtime/doc/various.txt

@@ -1,4 +1,4 @@
-*various.txt*   For Vim version 8.2.  Last change: 2021 Mar 23
+*various.txt*   For Vim version 8.2.  Last change: 2021 Sep 06
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -170,7 +170,7 @@ g8			Print the hex values of the bytes used in the
 			If the mark is "=", a line of dashes is printed
 			around the current line.
 
-							*:z!
+							*:z!*
 :[range]z![+-^.=][count]
 			Like ":z:", but when [count] is not specified, it
 			defaults to the Vim window height minus one.

runtime/doc/vim9.txt

@@ -1,4 +1,4 @@
-*vim9.txt*	For Vim version 8.2.  Last change: 2021 Aug 23
+*vim9.txt*	For Vim version 8.2.  Last change: 2021 Sep 13
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -180,6 +180,15 @@ For now you will need to pass the dictionary explicitly: >
 	var d = {item: 'value', func: DictFunc}
 	d.func(d, 'item')
 
+You can call a legacy dict function though: >
+	func Legacy() dict
+	  echo self.value
+	endfunc
+	def CallLegacy()
+	  var d = {func: Legacy, value: 'text'}
+	  d.func()
+	enddef
+
 The argument types and return type need to be specified.  The "any" type can
 be used, type checking will then be done at runtime, like with legacy
 functions.
@@ -1416,11 +1425,10 @@ In case the name is ambiguous, another name can be specified: >
 To import all exported items under a specific identifier: >
 	import * as That from 'thatscript.vim'
 
-{not implemented yet: using "This as That"}
-
 Then you can use "That.EXPORTED_CONST", "That.someValue", etc.  You are free
 to choose the name "That", but it is highly recommended to use the name of the
-script file to avoid confusion.
+script file to avoid confusion.  Also avoid command names, because the name
+will shadow them.
 
 `:import` can also be used in legacy Vim script.  The imported items still
 become script-local, even when the "s:" prefix is not given.

runtime/doc/windows.txt

@@ -1,4 +1,4 @@
-*windows.txt*   For Vim version 8.2.  Last change: 2021 Apr 10
+*windows.txt*   For Vim version 8.2.  Last change: 2021 Sep 09
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -296,7 +296,7 @@ Closing a window
 ----------------
 
 :q[uit]
-:{count}q[uit]
+:{count}q[uit]						*:count_quit*
 CTRL-W q						*CTRL-W_q*
 CTRL-W CTRL-Q						*CTRL-W_CTRL-Q*
 		Without {count}: Quit the current window.  If {count} is
@@ -390,7 +390,8 @@ CTRL-W CTRL-C						*CTRL-W_CTRL-C*
 CTRL-W o						*CTRL-W_o* *E445*
 CTRL-W CTRL-O					*CTRL-W_CTRL-O* *:on* *:only*
 		Make the current window the only one on the screen.  All other
-		windows are closed.  For {count} see |:quit| command.
+		windows are closed.  For {count} see the `:quit` command
+		above |:count_quit|.
 
 		When the 'hidden' option is set, all buffers in closed windows
 		become hidden.

runtime/filetype.vim

@@ -1,7 +1,7 @@
 " Vim support file to detect file types
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2021 Aug 23
+" Last Change:	2021 Oct 03
 
 " Listen very carefully, I will say this only once
 if exists("did_load_filetypes")
@@ -488,7 +488,7 @@ au BufNewFile,BufRead *.desktop,*.directory	setf desktop
 au BufNewFile,BufRead dict.conf,.dictrc		setf dictconf
 
 " Dictd config
-au BufNewFile,BufRead dictd.conf		setf dictdconf
+au BufNewFile,BufRead dictd*.conf		setf dictdconf
 
 " Diff files
 au BufNewFile,BufRead *.diff,*.rej		setf diff
@@ -876,6 +876,9 @@ au BufNewFile,BufRead *.json-patch			setf json
 " Jupyter Notebook is also json
 au BufNewFile,BufRead *.ipynb				setf json
 
+" Other files that look like json
+au BufNewFile,BufRead .babelrc,.eslintrc,.prettierrc,.firebaserc  setf json
+
 " JSONC
 au BufNewFile,BufRead *.jsonc			setf jsonc
 
@@ -1092,6 +1095,9 @@ au BufNewFile,BufRead *.moo			setf moo
 " Modconf
 au BufNewFile,BufRead */etc/modules.conf,*/etc/modules,*/etc/conf.modules setf modconf
 
+" MPD is based on XML
+au BufNewFile,BufRead *.mpd			setf xml
+
 " Mplayer config
 au BufNewFile,BufRead mplayer.conf,*/.mplayer/config	setf mplayerconf
 
@@ -1110,6 +1116,9 @@ au BufNewFile,BufRead *.mysql			setf mysql
 " Mutt setup files (must be before catch *.rc)
 au BufNewFile,BufRead */etc/Muttrc.d/*		call s:StarSetf('muttrc')
 
+" Tcl Shell RC file
+au BufNewFile,BufRead tclsh.rc			setf tcl
+
 " M$ Resource files
 au BufNewFile,BufRead *.rc,*.rch		setf rc
 
@@ -1140,6 +1149,9 @@ au BufNewFile,BufRead Neomuttrc			setf neomuttrc
 " Netrc
 au BufNewFile,BufRead .netrc			setf netrc
 
+" Nginx
+au BufNewFile,BufRead *.nginx,nginx*.conf,*nginx.conf,*/etc/nginx/*,*/usr/local/nginx/conf/*,*/nginx/*.conf			setf nginx
+
 " Ninja file
 au BufNewFile,BufRead *.ninja			setf ninja
 
@@ -1400,7 +1412,7 @@ au BufNewFile,BufRead *.ptl,*.pyi,SConstruct		   setf python
 " Radiance
 au BufNewFile,BufRead *.rad,*.mat		setf radiance
 
-" Raku (formelly Perl6)
+" Raku (formerly Perl6)
 au BufNewFile,BufRead *.pm6,*.p6,*.t6,*.pod6,*.raku,*.rakumod,*.rakudoc,*.rakutest  setf raku
 
 " Ratpoison config/command files
@@ -1802,7 +1814,7 @@ au BufRead,BufNewFile {pending,completed,undo}.data  setf taskdata
 au BufRead,BufNewFile *.task			setf taskedit
 
 " Tcl (JACL too)
-au BufNewFile,BufRead *.tcl,*.tk,*.itcl,*.itk,*.jacl	setf tcl
+au BufNewFile,BufRead *.tcl,*.tm,*.tk,*.itcl,*.itk,*.jacl,.tclshrc,.wishrc	setf tcl
 
 " TealInfo
 au BufNewFile,BufRead *.tli			setf tli
@@ -1996,14 +2008,15 @@ au BufNewFile,BufRead *.ws[fc]			setf wsh
 " XHTML
 au BufNewFile,BufRead *.xhtml,*.xht		setf xhtml
 
-" X Pixmap (dynamically sets colors, use BufEnter to make it work better)
-au BufEnter *.xpm
+" X Pixmap (dynamically sets colors, this used to trigger on BufEnter to make
+" it work better, but that breaks setting 'filetype' manually)
+au BufNewFile,BufRead *.xpm
 	\ if getline(1) =~ "XPM2" |
 	\   setf xpm2 |
 	\ else |
 	\   setf xpm |
 	\ endif
-au BufEnter *.xpm2				setf xpm2
+au BufNewFile,BufRead *.xpm2			setf xpm2
 
 " XFree86 config
 au BufNewFile,BufRead XF86Config
@@ -2138,7 +2151,7 @@ au BufNewFile,BufRead proftpd.conf*					call s:StarSetf('apachestyle')
 
 " More Apache config files
 au BufNewFile,BufRead access.conf*,apache.conf*,apache2.conf*,httpd.conf*,srm.conf*	call s:StarSetf('apache')
-au BufNewFile,BufRead */etc/apache2/*.conf*,*/etc/apache2/conf.*/*,*/etc/apache2/mods-*/*,*/etc/apache2/sites-*/*,*/etc/httpd/conf.d/*.conf*		call s:StarSetf('apache')
+au BufNewFile,BufRead */etc/apache2/*.conf*,*/etc/apache2/conf.*/*,*/etc/apache2/mods-*/*,*/etc/apache2/sites-*/*,*/etc/httpd/conf.*/*,*/etc/httpd/mods-*/*,*/etc/httpd/sites-*/*,*/etc/httpd/conf.d/*.conf*		call s:StarSetf('apache')
 
 " Asterisk config file
 au BufNewFile,BufRead *asterisk/*.conf*		call s:StarSetf('asterisk')

runtime/ftplugin/8th.vim

@@ -1,9 +1,10 @@
 " Vim ftplugin file
 " Language:	8th
 " Version:	any
-" Last Change:	2015/11/08
+" Last Change:	2021 Sep 20
+" Last Change:	2021/09/20
 " Maintainer:	Ron Aaron <ron@aaron-tech.com>
-" URL:          https://8th-dev.com/
+" URL:		https://8th-dev.com/
 " Filetypes:	*.8th
 " NOTE: 	8th allows any non-whitespace in a name, so you need to do:
 " 		setlocal iskeyword=!,@,33-35,%,$,38-64,A-Z,91-96,a-z,123-126,128-255
@@ -14,12 +15,13 @@ if exists("b:did_8thplugin")
  finish
 endif
 
-" Don't load another plugin for this buffer
+" Don't load another 8th plugin for this buffer
 let b:did_8thplugin = 1
 
 setlocal ts=2 sts=2 sw=2 et
-setlocal com=s1:/*,mb:*,ex:*/,:\|,:\\
+setlocal com=s1:/*,mb:*,ex:*/,b:--,be:\\
 setlocal fo=tcrqol
 setlocal matchpairs+=\::;
 setlocal iskeyword=!,@,33-35,%,$,38-64,A-Z,91-96,a-z,123-126,128-255
 setlocal suffixesadd=.8th
+let b:undo_ftplugin = "setlocal ts< sts< sw< et< com< fo< mps< isk< sua<"

runtime/ftplugin/c.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:	C
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2020 Feb 01
+" Last Change:	2021 Sep 21
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -40,8 +40,11 @@ endif
 
 " When the matchit plugin is loaded, this makes the % command skip parens and
 " braces in comments properly.
-let b:match_words = '^\s*#\s*if\(\|def\|ndef\)\>:^\s*#\s*elif\>:^\s*#\s*else\>:^\s*#\s*endif\>'
-let b:match_skip = 's:comment\|string\|character\|special'
+if !exists("b:match_words")
+  let b:match_words = '^\s*#\s*if\(\|def\|ndef\)\>:^\s*#\s*elif\>:^\s*#\s*else\>:^\s*#\s*endif\>'
+  let b:match_skip = 's:comment\|string\|character\|special'
+  let b:undo_ftplugin ..= " | unlet! b:match_skip b:match_words"
+endif
 
 " Win32 can filter files in the browse dialog
 if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
@@ -62,6 +65,7 @@ if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
 	  \ "C++ Source Files (*.cpp *.c++)\t*.cpp;*.c++\n" .
 	  \ "All Files (*.*)\t*.*\n"
   endif
+  let b:undo_ftplugin ..= " | unlet! b:browsefilter"
 endif
 
 let &cpo = s:cpo_save

runtime/ftplugin/dosini.vim

@@ -1,5 +1,5 @@
 " Vim filetype plugin file
-" Language:             Configuration File (ini file) for MSDOS/MS Windows
+" Language:             Configuration File (ini file) for MS-DOS/MS Windows
 " Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
 " Latest Revision:      2008-07-09
 

runtime/ftplugin/gprof.vim

@@ -1,6 +1,7 @@
-" Language:    gprof
-" Maintainer:  Dominique Pelle <dominique.pelle@gmail.com>
-" Last Change: 2021 Apr 08
+" Language:     gprof
+" Maintainer:   Dominique Pelle <dominique.pelle@gmail.com>
+" Contributors: Doug Kearns <dougkearns@gmail.com>
+" Last Change:  2021 Sep 19
 
 " When cursor is on one line of the gprof call graph,
 " calling this function jumps to this function in the call graph.
@@ -9,7 +10,7 @@ if exists("b:did_ftplugin")
 endif
 let b:did_ftplugin=1
 
-fun! <SID>GprofJumpToFunctionIndex()
+func! <SID>GprofJumpToFunctionIndex()
   let l:line = getline('.')
   if l:line =~ '[\d\+\]$'
     " We're in a line in the call graph.
@@ -22,11 +23,14 @@ fun! <SID>GprofJumpToFunctionIndex()
     call search('^\[\d\+\].*\d\s\+' .  escape(@", '[]*.') . '\>', 'sW')
     norm! zz
   endif
-endfun
+endfunc
 
-" Pressing <C-]> on a line in the gprof flat profile or in
-" the call graph, jumps to the corresponding function inside
-" the flat profile.
-map <buffer> <silent> <C-]> :call <SID>GprofJumpToFunctionIndex()<CR>
+if !exists("no_plugin_maps") && !exists("no_gprof_maps")
+  " Pressing <C-]> on a line in the gprof flat profile or in
+  " the call graph, jumps to the corresponding function inside
+  " the flat profile.
+  map <buffer> <silent> <C-]> :call <SID>GprofJumpToFunctionIndex()<CR>
+  let b:undo_ftplugin = "silent! unmap <buffer> <C-]>"
+endif
 
 " vim:sw=2 fdm=indent

runtime/ftplugin/man.vim

@@ -2,7 +2,7 @@
 " Language:	man
 " Maintainer:	Jason Franklin <vim@justemail.net>
 " Maintainer:	SungHyun Nam <goweol@gmail.com>
-" Last Change: 	2020 Oct 09
+" Last Change: 	2021 Sep 26
 
 " To make the ":Man" command available before editing a manual page, source
 " this script from your startup vimrc file.

runtime/ftplugin/matlab.vim

@@ -1,7 +1,8 @@
 " Vim filetype plugin file
 " Language:	matlab
 " Maintainer:	Jake Wasserman <jwasserman at gmail dot com>
-" Last Change: 	2019 Sep 27
+" Update By:    Gabriel Dupras
+" Last Change: 	2021 Aug 30
 
 " Contributors:
 " Charles Campbell
@@ -15,9 +16,9 @@ let s:save_cpo = &cpo
 set cpo-=C
 
 if exists("loaded_matchit")
- let s:conditionalEnd = '\%(([^()]*\)\@!\<end\>\%([^()]*)\)\@!'
+ let s:conditionalEnd = '\%(\%(^\|;\)\s*\)\@<=end\>'
  let b:match_words=
-   \ '\<\%(if\|switch\|for\|while\)\>:\<\%(elseif\|case\|break\|continue\|else\|otherwise\)\>:'.s:conditionalEnd.','.
+   \ '\<\%(if\|switch\|for\|while\|try\)\>:\<\%(elseif\|case\|break\|continue\|else\|otherwise\|catch\)\>:' . s:conditionalEnd . ',' .
    \ '\<function\>:\<return\>:\<endfunction\>'
  unlet s:conditionalEnd
 endif

runtime/ftplugin/nginx.vim

@@ -0,0 +1,6 @@
+" Vim filetype plugin
+" Language: nginx.conf
+" Maintainer: Chris Aumann <me@chr4.org>
+" Last Change: Apr 15, 2017
+
+setlocal commentstring=#\ %s

runtime/ftplugin/ocaml.vim

@@ -371,7 +371,7 @@ endfunction
               endif
             else
               let annot_file_name = ''
-              "(Pierre Vittet: I have commented 4b because this was chrashing
+              "(Pierre Vittet: I have commented 4b because this was crashing
               "my vim (it produced infinite loop))
               "
               " 4b. anarchy : the renamed _build directory may be higher in the hierarchy
@@ -462,8 +462,8 @@ endfunction
 
   "b. 'search' and 'match' work to find the type information
 
-      "In:  - lin1,col1: postion of expression first char
-      "     - lin2,col2: postion of expression last char
+      "In:  - lin1,col1: position of expression first char
+      "     - lin2,col2: position of expression last char
       "Out: - the pattern to be looked for to find the block
       " Must be called in the source buffer (use of line2byte)
     function! s:Block_pattern(lin1,lin2,col1,col2)
@@ -581,7 +581,7 @@ endfunction
       let res = substitute (a:res, "\n", "", "g" )
       "remove double space
       let res =substitute(res , "  ", " ", "g")
-      "remove space at begining of string.
+      "remove space at beginning of string.
       let res = substitute(res, "^ *", "", "g")
       return res
     endfunction

runtime/ftplugin/octave.vim

@@ -0,0 +1,63 @@
+" Vim filetype plugin file
+" Language:	GNU Octave
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2021 Sep 02
+
+if exists("b:did_ftplugin")
+  finish
+endif
+let b:did_ftplugin = 1
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+" TODO: update Matlab ftplugin and source it as the base file?
+
+setlocal comments=s:%{,m:\ ,e:%},s:#{,m:\ ,e:#},:%,:#
+setlocal commentstring=#\ %s
+setlocal formatoptions-=t formatoptions+=croql
+
+setlocal keywordprg=info\ octave\ --vi-keys\ --index-search
+
+if exists("loaded_matchit") && !exists("b:match_words")
+  let b:match_words = '\<unwind_protect\>:\<unwind_protect_cleanup\>:\<end_unwind_protect\>'
+  if exists("octave_use_matlab_end")
+    let b:match_words ..= ',' ..
+	                \ '\<\%(classdef\|enumeration\|events\|for\|function\|if\|methods\|parfor\|properties\|switch\|while\|try\)\>' ..
+                        \ ':' ..
+			\ '\<\%(elseif\|else\|case\|otherwise\|break\|continue\|catch\)\>' ..
+                        \ ':' ..
+			\ '\<end\>'
+  else
+    let b:match_words ..= ',' ..
+                        \ '\<classdef\>:\<endclassdef\>,' ..
+			\ '\<enumeration\>:\<endenumeration\>,' ..
+			\ '\<events\>:\<endevents\>,' ..
+			\ '\<do\>:\<\%(break\|continue\)\>:\<until\>' ..
+			\ '\<for\>:\<\%(break\|continue\)\>:\<endfor\>,' ..
+			\ '\<function\>:\<return\>:\<endfunction\>,' ..
+			\ '\<if\>:\<\%(elseif\|else\)\>:\<endif\>,' ..
+			\ '\<methods\>:\<endmethods\>,' ..
+			\ '\<parfor\>:\<endparfor\>,' ..
+			\ '\<properties\>:\<endproperties\>,' ..
+			\ '\<switch\>:\<\%(case\|otherwise\)\>:\<endswitch\>,' ..
+			\ '\<while\>:\<\%(break\|continue\)\>:\<endwhile\>,' ..
+			\ '\<try\>:\<catch\>:\<end_try_catch\>'
+  endif
+  " only match in statement position
+  let s:statement_start = escape('\%(\%(^\|;\)\s*\)\@<=', '\')
+  let b:match_words = substitute(b:match_words, '\\<', s:statement_start, 'g')
+endif
+
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let b:browsefilter = "GNU Octave Source Files (*.m)\t*.m\n" ..
+		     \ "All Files (*.*)\t*.*\n"
+endif
+
+let b:undo_ftplugin = "setl com< cms< fo< kp< " ..
+		    \ "| unlet! b:browsefilter b:match_words"
+
+let &cpo = s:cpo_save
+unlet s:cpo_save
+
+" vim: nowrap sw=2 sts=2 ts=8 noet:

runtime/ftplugin/spec.vim

@@ -18,8 +18,8 @@ if !exists("no_plugin_maps") && !exists("no_spec_maps")
 	endif
 endif
 
-if !hasmapto("call <SID>SpecChangelog(\"\")<CR>")
-       noremap <buffer> <unique> <script> <Plug>SpecChangelog :call <SID>SpecChangelog("")<CR>
+if !hasmapto("call SpecChangelog(\"\")<CR>")
+       noremap <buffer> <unique> <script> <Plug>SpecChangelog :call SpecChangelog("")<CR>
 endif
 
 if !exists("*s:GetRelVer")

runtime/ftplugin/systemverilog.vim

@@ -32,7 +32,7 @@ if exists("loaded_matchit")
     \ '\<checker\>:\<endchecker\>,' .
     \ '\<class\>:\<endclass\>,' .
     \ '\<clocking\>:\<endclocking\>,' .
-    \ '\<gruop\>:\<endgruop\>,' .
+    \ '\<group\>:\<endgroup\>,' .
     \ '\<interface\>:\<endinterface\>,' .
     \ '\<package\>:\<endpackage\>,' .
     \ '\<program\>:\<endprogram\>,' .

runtime/ftplugin/tex.vim

@@ -28,7 +28,7 @@ let &l:define .= '\|\\\(re\)\=new\(boolean\|command\|counter\|environment\|font'
 
 " Tell Vim how to recognize LaTeX \include{foo} and plain \input bar :
 let &l:include .= '\|\\include{'
-" On some file systems, "{" and "}" are inluded in 'isfname'.  In case the
+" On some file systems, "{" and "}" are included in 'isfname'.  In case the
 " TeX file has \include{fname} (LaTeX only), strip everything except "fname".
 let &l:includeexpr = "substitute(v:fname, '^.\\{-}{\\|}.*', '', 'g')"
 

runtime/indent/ada.vim

@@ -219,7 +219,7 @@ function GetAdaIndent()
       " Move indent in twice (next 'when' will move back)
       let ind = ind + 2 * shiftwidth()
    elseif line =~ '^\s*end\s*record\>'
-      " Move indent back to tallying 'type' preceeding the 'record'.
+      " Move indent back to tallying 'type' preceding the 'record'.
       " Allow indent to be equal to 'end record's.
       let ind = s:MainBlockIndent( ind+shiftwidth(), lnum, 'type\>', '' )
    elseif line =~ '\(^\s*new\>.*\)\@<!)\s*[;,]\s*$'

runtime/indent/cdl.vim

@@ -1,5 +1,6 @@
 " Description:	Comshare Dimension Definition Language (CDL)
-" Author:	Raul Segura Acevedo <raulseguraaceved@netscape.net>
+" Maintainer:	Raul Segura Acevedo <raulseguraaceved@netscape.net> (Invalid email address)
+" 		Doug Kearns <dougkearns@gmail.com>
 " Last Change:	Fri Nov 30 13:35:48  2001 CST
 
 if exists("b:did_indent")
@@ -16,8 +17,8 @@ if exists("*CdlGetIndent")
     "finish
 endif
 
-" find out if an "...=..." expresion is an assignment (or a conditional)
-" it scans 'line' first, and then the previos lines
+" find out if an "...=..." expression is an assignment (or a conditional)
+" it scans 'line' first, and then the previous lines
 fun! CdlAsignment(lnum, line)
   let f = -1
   let lnum = a:lnum
@@ -33,7 +34,7 @@ fun! CdlAsignment(lnum, line)
       endif
       " it's formula if there's a ';', 'elsE', 'theN', 'enDif' or 'expr'
       " conditional if there's a '<', '>', 'elseif', 'if', 'and', 'or', 'not',
-      " 'memberis', 'childrenof' and other \k\+of funcions
+      " 'memberis', 'childrenof' and other \k\+of functions
       let f = line[inicio-1] =~? '[en;]' || strpart(line, inicio-4, 4) =~? 'ndif\|expr'
     endw
     let lnum = prevnonblank(lnum-1)
@@ -106,7 +107,7 @@ fun! CdlGetIndent(lnum)
     elseif c == '(' || c ==? 'f' " '(' or 'if'
       let ind = ind + shiftwidth()
     else " c == '='
-      " if it is an asignment increase indent
+      " if it is an assignment increase indent
       if f == -1 " we don't know yet, find out
 	let f = CdlAsignment(lnum, strpart(line, 0, inicio))
       end
@@ -117,11 +118,11 @@ fun! CdlGetIndent(lnum)
   endw
 
   " CURRENT LINE, if it starts with a closing element, decrease indent
-  " or if it starts with '=' (asignment), increase indent
+  " or if it starts with '=' (assignment), increase indent
   if match(thisline, '^\c\s*\(else\|then\|endif\|[);]\)') >= 0
     let ind = ind - shiftwidth()
   elseif match(thisline, '^\s*=') >= 0
-    if f == -1 " we don't know yet if is an asignment, find out
+    if f == -1 " we don't know yet if is an assignment, find out
       let f = CdlAsignment(lnum, "")
     end
     if f == 1 " formula increase it

runtime/indent/cobol.vim

@@ -7,6 +7,7 @@
 " Ankit Jain      22.03.2019     Changes & fixes:
 "                                Allow chars in 1st 6 columns
 "                                #C22032019
+" Ankit Jain      24.09.2021     add b:undo_indent (request by tpope)
 
 if exists("b:did_indent")
     finish
@@ -18,6 +19,8 @@ setlocal indentexpr=GetCobolIndent(v:lnum)
 setlocal indentkeys&
 setlocal indentkeys+=0<*>,0/,0$,0=01,=~division,=~section,0=~end,0=~then,0=~else,0=~when,*<Return>,.
 
+let b:undo_indent = "setlocal expandtab< indentexpr< indentkeys<"
+
 " Only define the function once.
 if exists("*GetCobolIndent")
     finish

runtime/indent/config.vim

@@ -1,9 +1,10 @@
 " Vim indent file
-" Language:             Autoconf configure.{ac,in} file
-" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2006-12-20
-" TODO:                 how about nested [()]'s in one line
-"                   what's wrong with '\\\@!'?
+" Language:		Autoconf configure.{ac,in} file
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
+" Last Change:		24 Sep 2021
+
+" TODO: how about nested [()]'s in one line what's wrong with '\\\@!'?
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")
@@ -16,6 +17,8 @@ setlocal indentexpr=GetConfigIndent()
 setlocal indentkeys=!^F,o,O,=then,=do,=else,=elif,=esac,=fi,=fin,=fil,=done
 setlocal nosmartindent
 
+let b:undo_indent = "setl inde< indk< si<"
+
 " Only define the function once.
 if exists("*GetConfigIndent")
   finish
@@ -62,8 +65,8 @@ function GetConfigIndent()
     let ind = s:GetOffsetOf(line, '\[')
   endif
 
-  " if previous line had an unmatched closing parantheses,
-  " indent to the matching opening parantheses
+  " if previous line had an unmatched closing parentheses,
+  " indent to the matching opening parentheses
   if line =~ '[^(]\+\\\@<!)$'
     call search(')', 'bW')
     let lnum = searchpair('\\\@<!(', '', ')', 'bWn')

runtime/indent/css.vim

@@ -1,8 +1,10 @@
 " Vim indent file
-" Language:	    CSS
-" Maintainer:	    Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2012-05-30
-"		    Use of shiftwidth() added by Oleg Zubchenko.	
+" Language:		CSS
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
+" Last Change:		24 Sep 2021
+
+" Use of shiftwidth() added by Oleg Zubchenko.
 
 if exists("b:did_indent")
   finish
@@ -13,7 +15,7 @@ setlocal indentexpr=GetCSSIndent()
 setlocal indentkeys=0{,0},!^F,o,O
 setlocal nosmartindent
 
-let b:undo_indent = "setl smartindent< indentkeys< indentexpr<"
+let b:undo_indent = "setl inde< indk< si<"
 
 if exists("*GetCSSIndent")
   finish

runtime/indent/d.vim

@@ -1,7 +1,7 @@
 " Vim indent file for the D programming language (version 0.137).
-"
 " Language:	D
-" Maintainer:	Jason Mills<jmills@cs.mun.ca>
+" Maintainer:	Jason Mills <jmills@cs.mun.ca> (Invalid email address)
+" 		Doug Kearns <dougkearns@gmail.com>
 " Last Change:	2005 Nov 22
 " Version:	0.1
 "

runtime/indent/dtd.vim

@@ -1,12 +1,15 @@
 " Vim indent file
-" Language:    	    DTD (Document Type Definition for XML)
-" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2011-07-08
+" Language:		DTD (Document Type Definition for XML)
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
+" Last Change:		24 Sep 2021
 
 setlocal indentexpr=GetDTDIndent()
 setlocal indentkeys=!^F,o,O,>
 setlocal nosmartindent
 
+let b:undo_indent = "setl inde< indk< si<"
+
 if exists("*GetDTDIndent")
   finish
 endif
@@ -119,16 +122,16 @@ function GetDTDIndent()
     " Next comes the content model.  If the token we’ve found isn’t a
     " parenthesis it must be either ANY, EMPTY or some random junk.  Either
     " way, we’re done indenting this element, so set it to that of the first
-    " line so that the terminating “>” winds up having the same indention.
+    " line so that the terminating “>” winds up having the same indentation.
     if token != '('
       return indent
     endif
 
     " Now go through the content model.  We need to keep track of the nesting
     " of parentheses.  As soon as we hit 0 we’re done.  If that happens we must
-    " have a complete content model.  Thus set indention to be the same as that
+    " have a complete content model.  Thus set indentation to be the same as that
     " of the first line so that the terminating “>” winds up having the same
-    " indention.  Otherwise, we’ll indent to the innermost parentheses not yet
+    " indentation.  Otherwise, we’ll indent to the innermost parentheses not yet
     " matched.
     let [indent_of_innermost, end] = s:indent_to_innermost_parentheses(line, end)
     if indent_of_innermost != -1

runtime/indent/dylan.vim

@@ -1,8 +1,9 @@
 " Vim indent file
 " Language:	Dylan
+" Maintainer:	Brent A. Fulgham <bfulgham@debian.org> (Invalid email address)
+" 		Doug Kearns <dougkearns@gmail.com>
 " Version:	0.01
 " Last Change:	2017 Jun 13
-" Maintainer:	Brent A. Fulgham <bfulgham@debian.org>
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")

runtime/indent/elm.vim

@@ -4,7 +4,7 @@
 " Original Author: Joseph Hager <ajhager@gmail.com>
 " Copyright: Joseph Hager <ajhager@gmail.com>
 " License: BSD3
-" Latest Revision: 2020-05-29
+" Latest Revision: 2021-09-29
 
 " Only load this indent file when no other was loaded.
 if exists('b:did_indent')
@@ -19,6 +19,8 @@ setlocal indentkeys+=0=else,0=if,0=of,0=import,0=then,0=type,0\|,0},0\],0),=-},0
 setlocal nolisp
 setlocal nosmartindent
 
+let b:undo_indent = "setl et< inde< indk< lisp< si<"
+
 " Only define the function once.
 if exists('*GetElmIndent')
 	finish

runtime/indent/erlang.vim

@@ -57,7 +57,7 @@ endfunction
 " ======================
 
 " Indtokens are "indentation tokens". See their exact format in the
-" documentaiton of the s:GetTokensFromLine function.
+" documentation of the s:GetTokensFromLine function.
 
 " Purpose:
 "   Calculate the new virtual column after the given segment of a line.
@@ -75,7 +75,7 @@ endfunction
 "   s:CalcVCol("\t'\tx', b", 1, 4, 4)  -> 10
 function! s:CalcVCol(line, first_index, last_index, vcol, tabstop)
 
-  " We copy the relevent segment of the line, otherwise if the line were
+  " We copy the relevant segment of the line, otherwise if the line were
   " e.g. `"\t", term` then the else branch below would consume the `", term`
   " part at once.
   let line = a:line[a:first_index : a:last_index]
@@ -604,7 +604,7 @@ endfunction
 function! s:BeginElementFoundIfEmpty(stack, token, curr_vcol, stored_vcol, sw)
   if empty(a:stack)
     if a:stored_vcol ==# -1
-      call s:Log('    "' . a:token . '" directly preceeds LTI -> return')
+      call s:Log('    "' . a:token . '" directly precedes LTI -> return')
       return [1, a:curr_vcol + a:sw]
     else
       call s:Log('    "' . a:token .
@@ -825,7 +825,7 @@ function! s:ErlangCalcIndent2(lnum, stack)
         if ret | return res | endif
 
         if stored_vcol ==# -1
-          call s:Log('    End of clause directly preceeds LTI -> return')
+          call s:Log('    End of clause directly precedes LTI -> return')
           return 0
         else
           call s:Log('    End of clause (but not end of line) -> return')

runtime/indent/eterm.vim

@@ -1,7 +1,8 @@
 " Vim indent file
-" Language:             Eterm configuration file
-" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2006-12-20
+" Language:		Eterm configuration file
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
+" Last Change:		24 Sep 2021
 
 if exists("b:did_indent")
   finish
@@ -12,6 +13,8 @@ setlocal indentexpr=GetEtermIndent()
 setlocal indentkeys=!^F,o,O,=end
 setlocal nosmartindent
 
+let b:undo_indent = "setl inde< indk< si<"
+
 if exists("*GetEtermIndent")
   finish
 endif

runtime/indent/framescript.vim

@@ -1,7 +1,8 @@
 " Vim indent file
-" Language:             FrameScript
-" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2008-07-19
+" Language:		FrameScript
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
+" Last Change:		24 Sep 2021
 
 if exists("b:did_indent")
   finish
@@ -12,6 +13,8 @@ setlocal indentexpr=GetFrameScriptIndent()
 setlocal indentkeys=!^F,o,O,0=~Else,0=~EndIf,0=~EndLoop,0=~EndSub
 setlocal nosmartindent
 
+let b:undo_indent = "setl inde< indk< si<"
+
 if exists("*GetFrameScriptIndent")
   finish
 endif

runtime/indent/idlang.vim

@@ -1,7 +1,8 @@
 " IDL (Interactive Data Language) indent file.
-" Language: IDL (ft=idlang)
+" Language:	IDL (ft=idlang)
+" Maintainer:	Aleksandar Jelenak <ajelenak AT yahoo.com> (Invalid email address)
+" 		Doug Kearns <dougkearns@gmail.com>
 " Last change:	2017 Jun 13
-" Maintainer: Aleksandar Jelenak <ajelenak AT yahoo.com>
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")

runtime/indent/json.vim

@@ -1,6 +1,6 @@
 " Vim indent file
 " Language:		JSON
-" Mantainer:		Eli Parra <eli@elzr.com> https://github.com/elzr/vim-json
+" Maintainer:		Eli Parra <eli@elzr.com> https://github.com/elzr/vim-json
 " Last Change:          2020 Aug 30
 "   https://github.com/jakar/vim-json/commit/20b650e22aa750c4ab6a66aa646bdd95d7cd548a#diff-e81fc111b2052e306d126bd9989f7b7c
 " Original Author:	Rogerz Zhang <rogerz.zhang at gmail.com> http://github.com/rogerz/vim-json

runtime/indent/ld.vim

@@ -1,7 +1,8 @@
 " Vim indent file
-" Language:             ld(1) script
-" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2006-12-20
+" Language:		ld(1) script
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
+" Last Change:		24 Sep 2021
 
 if exists("b:did_indent")
   finish
@@ -12,6 +13,8 @@ setlocal indentexpr=GetLDIndent()
 setlocal indentkeys=0{,0},!^F,o,O
 setlocal nosmartindent
 
+let b:undo_indent = "setl inde< indk< si<"
+
 if exists("*GetLDIndent")
   finish
 endif

runtime/indent/lifelines.vim

@@ -11,7 +11,7 @@ endif
 let b:did_indent = 1
 
 " LifeLines uses cindent without ; line terminator, C functions
-" declarations, C keywords, C++ formating
+" declarations, C keywords, C++ formatting
 setlocal cindent
 setlocal cinwords=""
 setlocal cinoptions+=+0

runtime/indent/mail.vim

@@ -1,7 +1,7 @@
 " Vim indent file
 " Language:	Mail
 " Maintainer:	Bram Moolenaar
-" Last Change:	2009 Jun 03
+" Last Change:	2021 Sep 26
 
 if exists("b:did_indent")
   finish
@@ -11,3 +11,5 @@ let b:did_indent = 1
 " What works best is auto-indenting, disable other indenting.
 " For formatting see the ftplugin.
 setlocal autoindent nosmartindent nocindent indentexpr=
+
+let b:undo_indent = "setl ai< cin< inde< si<"

runtime/indent/make.vim

@@ -1,7 +1,8 @@
 " Vim indent file
-" Language:             Makefile
-" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2007-05-07
+" Language:		Makefile
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
+" Last Change:		24 Sep 2021
 
 if exists("b:did_indent")
   finish
@@ -12,6 +13,8 @@ setlocal indentexpr=GetMakeIndent()
 setlocal indentkeys=!^F,o,O,<:>,=else,=endif
 setlocal nosmartindent
 
+let b:undo_indent = "setl ai< inde< indk<"
+
 if exists("*GetMakeIndent")
   finish
 endif

runtime/indent/matlab.vim

@@ -2,6 +2,7 @@
 " Language: MATLAB
 " Maintainer: Axel Forsman <axelsfor@gmail.com>
 " Previous maintainer: Christophe Poucet <christophe.poucet@pandora.be>
+" Last Update: 2021-10-01
 
 " Only load if no other indent file is loaded
 if exists('b:did_indent') | finish | endif
@@ -9,6 +10,7 @@ let b:did_indent = 1
 
 setlocal indentexpr=GetMatlabIndent()
 setlocal indentkeys=!,o,O,e,0=end,0=elseif,0=case,0=otherwise,0=catch,0=function,0=elsei
+let b:undo_indent = "setlocal indentexpr< indentkeys<"
 
 " The value of the Function indenting format in
 " MATLAB Editor/Debugger Language Preferences.

runtime/indent/mma.vim

@@ -1,9 +1,10 @@
 " Vim indent file
-" Language:     Mathematica
-" Author:       steve layland <layland@wolfram.com>
-" Last Change:  Sat May  10 18:56:22 CDT 2005
-" Source:       http://vim.sourceforge.net/scripts/script.php?script_id=1274
-"               http://members.wolfram.com/layland/vim/indent/mma.vim
+" Language:	Mathematica
+" Maintainer:	Steve Layland <layland@wolfram.com> (Invalid email address)
+" 		Doug Kearns <dougkearns@gmail.com>
+" Last Change:	Sat May  10 18:56:22 CDT 2005
+" Source:	http://vim.sourceforge.net/scripts/script.php?script_id=1274
+" 		http://members.wolfram.com/layland/vim/indent/mma.vim
 "
 " NOTE:
 " Empty .m files will automatically be presumed to be Matlab files

runtime/indent/nginx.vim

@@ -0,0 +1,17 @@
+" Vim indent file
+" Language: nginx.conf
+" Maintainer: Chris Aumann <me@chr4.org>
+" Last Change: Apr 15, 2017
+
+if exists("b:did_indent")
+    finish
+endif
+let b:did_indent = 1
+
+setlocal indentexpr=
+
+" cindent actually works for nginx' simple file structure
+setlocal cindent
+
+" Just make sure that the comments are not reset as defs would be.
+setlocal cinkeys-=0#

runtime/indent/objc.vim

@@ -15,7 +15,7 @@ setlocal cindent
 " Set the function to do the work.
 setlocal indentexpr=GetObjCIndent()
 
-" To make a colon (:) suggest an indentation other than a goto/swich label,
+" To make a colon (:) suggest an indentation other than a goto/switch label,
 setlocal indentkeys-=:
 setlocal indentkeys+=<:>
 

runtime/indent/occam.vim

@@ -1,6 +1,7 @@
 " Vim indent file
 " Language:	occam
-" Maintainer:	Mario Schweigler <ms44@kent.ac.uk>
+" Maintainer:	Mario Schweigler <ms44@kent.ac.uk> (Invalid email address)
+" 		Doug Kearns <dougkearns@gmail.com>
 " Last Change:	23 April 2003
 
 " Only load this indent file when no other was loaded.

runtime/indent/pascal.vim

@@ -2,11 +2,9 @@
 " Language:    Pascal
 " Maintainer:  Neil Carter <n.carter@swansea.ac.uk>
 " Created:     2004 Jul 13
-" Last Change: 2021 Jul 01
+" Last Change: 2021 Sep 22
 "
-" This is version 2.0, a complete rewrite.
-"
-" For further documentation, see http://psy.swansea.ac.uk/staff/carter/vim/
+" For further documentation, see https://psy.swansea.ac.uk/staff/carter/vim/
 
 
 if exists("b:did_indent")
@@ -20,13 +18,14 @@ setlocal indentkeys+==end;,==const,==type,==var,==begin,==repeat,==until,==for
 setlocal indentkeys+==program,==function,==procedure,==object,==private
 setlocal indentkeys+==record,==if,==else,==case
 
-let b:undo_indent = "setl indentkeys< indentexpr<"
+let b:undo_indent = 'setlocal indentexpr< indentkeys<'
 
 if exists("*GetPascalIndent")
 	finish
 endif
 
 
+" ________________________________________________________________
 function! s:GetPrevNonCommentLineNum( line_num )
 
 	" Skip lines starting with a comment
@@ -44,6 +43,7 @@ function! s:GetPrevNonCommentLineNum( line_num )
 endfunction
 
 
+" ________________________________________________________________
 function! s:PurifyCode( line_num )
 	" Strip any trailing comments and whitespace
 	let pureline = 'TODO'
@@ -51,6 +51,7 @@ function! s:PurifyCode( line_num )
 endfunction
 
 
+" ________________________________________________________________
 function! GetPascalIndent( line_num )
 
 	" Line 0 always goes at column 0
@@ -184,7 +185,7 @@ function! GetPascalIndent( line_num )
 	endif
 
 
-" ____________________________________________________________________
+" ________________________________________________________________
 " Object/Borland Pascal/Delphi Extensions
 "
 " Note that extended-pascal is handled here, unless it is simpler to
@@ -222,8 +223,6 @@ function! GetPascalIndent( line_num )
 	endif
 
 
-" ____________________________________________________________________
-
 	" If nothing changed, return same indent.
 	return indnt
 endfunction

runtime/indent/postscr.vim

@@ -1,7 +1,8 @@
 " PostScript indent file
-" Language:    PostScript
-" Maintainer:  Mike Williams <mrw@netcomuk.co.uk>
-" Last Change: 2nd July 2001
+" Language:	PostScript
+" Maintainer:	Mike Williams <mrw@netcomuk.co.uk> (Invalid email address)
+" 		Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2nd July 2001
 "
 
 " Only load this indent file when no other was loaded.

runtime/indent/pov.vim

@@ -44,7 +44,7 @@ function GetPoVRayIndent()
     return -1
   endif
 
-  " Search backwards for the frist non-empty, non-comment line.
+  " Search backwards for the first non-empty, non-comment line.
   let plnum = prevnonblank(v:lnum - 1)
   let plind = indent(plnum)
   while plnum > 0 && synIDattr(synID(plnum, plind+1, 0), "name") =~? "comment"

runtime/indent/prolog.vim

@@ -1,7 +1,8 @@
 "  vim: set sw=4 sts=4:
-"  Maintainer	: Gergely Kontra <kgergely@mcl.hu>
-"  Revised on	: 2002.02.18. 23:34:05
-"  Language	: Prolog
+"  Language:	Prolog
+"  Maintainer:	Gergely Kontra <kgergely@mcl.hu> (Invalid email address)
+" 		Doug Kearns <dougkearns@gmail.com>
+"  Revised on:	2002.02.18. 23:34:05
 "  Last change by: Takuya Fujiwara, 2018 Sep 23
 
 " TODO:

runtime/indent/python.vim

@@ -2,7 +2,7 @@
 " Language:		Python
 " Maintainer:		Bram Moolenaar <Bram@vim.org>
 " Original Author:	David Bustos <bustos@caltech.edu>
-" Last Change:		2021 May 26
+" Last Change:		2021 Sep 26
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")
@@ -17,6 +17,8 @@ setlocal autoindent	" indentexpr isn't much help otherwise
 setlocal indentexpr=GetPythonIndent(v:lnum)
 setlocal indentkeys+=<:>,=elif,=except
 
+let b:undo_indent = "setl ai< inde< indk< lisp<"
+
 " Only define the function once.
 if exists("*GetPythonIndent")
   finish

runtime/indent/readline.vim

@@ -1,7 +1,8 @@
 " Vim indent file
-" Language:             readline configuration file
-" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2006-12-20
+" Language:		readline configuration file
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
+" Last Change:		24 Sep 2021
 
 if exists("b:did_indent")
   finish
@@ -12,6 +13,8 @@ setlocal indentexpr=GetReadlineIndent()
 setlocal indentkeys=!^F,o,O,=$else,=$endif
 setlocal nosmartindent
 
+let b:undo_indent = "setl inde< indk< si<"
+
 if exists("*GetReadlineIndent")
   finish
 endif

runtime/indent/ruby.vim

@@ -265,7 +265,7 @@ function! GetRubyIndent(...) abort
         \ ]
 
   " Most Significant line based on the previous one -- in case it's a
-  " contination of something above
+  " continuation of something above
   let indent_info.plnum_msl = s:GetMSL(indent_info.plnum)
 
   for callback_name in indent_callback_names

runtime/indent/sdl.vim

@@ -1,7 +1,7 @@
 " Vim indent file
 " Language:	SDL
 " Maintainer:	Michael Piefel <entwurf@piefel.de>
-" Last Change:	10 December 2011
+" Last Change:	2021 Oct 03
 
 " Shamelessly stolen from the Vim-Script indent file
 
@@ -14,6 +14,8 @@ let b:did_indent = 1
 setlocal indentexpr=GetSDLIndent()
 setlocal indentkeys+==~end,=~state,*<Return>
 
+let b:undo_indent = "setl inde< indk<"
+
 " Only define the function once.
 if exists("*GetSDLIndent")
 "  finish

runtime/indent/sqlanywhere.vim

@@ -9,7 +9,7 @@
 " Notes:
 "    Indenting keywords are based on Oracle and Sybase Adaptive Server
 "    Anywhere (ASA).  Test indenting was done with ASA stored procedures and
-"    fuctions and Oracle packages which contain stored procedures and
+"    functions and Oracle packages which contain stored procedures and
 "    functions.
 "    This has not been tested against Microsoft SQL Server or
 "    Sybase Adaptive Server Enterprise (ASE) which use the Transact-SQL

runtime/indent/systemverilog.vim

@@ -64,7 +64,7 @@ function SystemVerilogIndent()
     let vverb = 0
   endif
 
-  " Indent accoding to last line
+  " Indent according to last line
   " End of multiple-line comment
   if last_line =~ '\*/\s*$' && last_line !~ '/\*.\{-}\*/'
     let ind = ind - offset_comment1
@@ -220,7 +220,7 @@ function SystemVerilogIndent()
 
   endif
 
-  " Return the indention
+  " Return the indentation
   return ind
 endfunction
 

runtime/indent/tcl.vim

@@ -1,8 +1,8 @@
 " Vim indent file
-" Language:	    	Tcl
-" Latest Update:  	Chris Heithoff <chrisheithoff@gmail.com>
+" Language:		Tcl
+" Maintainer:		Chris Heithoff <chrisheithoff@gmail.com>
 " Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2018-12-05
+" Last Change:		24 Sep 2021
 
 if exists("b:did_indent")
   finish
@@ -13,6 +13,8 @@ setlocal indentexpr=GetTclIndent()
 setlocal indentkeys=0{,0},!^F,o,O,0]
 setlocal nosmartindent
 
+let b:undo_indent = "setl inde< indk< si<"
+
 if exists("*GetTclIndent")
   finish
 endif

runtime/indent/tcsh.vim

@@ -1,7 +1,7 @@
 " Vim indent file
 " Language:		C-shell (tcsh)
-" Maintainer:		GI <a@b.c>, where a='gi1242+vim', b='gmail', c='com'
-" Last Modified:	Sat 10 Dec 2011 09:23:00 AM EST
+" Maintainer:		Doug Kearns <a@b.com> where a=dougkearns, b=gmail
+" Last Modified:	Sun 26 Sep 2021 12:38:38 PM EDT
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")
@@ -12,6 +12,7 @@ let b:did_indent = 1
 
 setlocal indentexpr=TcshGetIndent()
 setlocal indentkeys+=e,0=end,0=endsw indentkeys-=0{,0},0),:,0#
+let b:undo_indent = "setl inde< indk<"
 
 " Only define the function once.
 if exists("*TcshGetIndent")

runtime/indent/tex.vim

@@ -288,7 +288,7 @@ function! GetTeXIndent() " {{{
             let ind = ind - shiftwidth()
             let stay = 0
         endif
-        " lines following to '\item' are intented once again:
+        " lines following to '\item' are indented once again:
         if line =~ g:tex_items
             let ind = ind + shiftwidth()
             let stay = 0

runtime/indent/treetop.vim

@@ -34,5 +34,5 @@ function GetTreetopIndent()
     let ind -= shiftwidth()
   end
 
-  retur ind
+  return ind
 endfunction

runtime/indent/typescript.vim

@@ -460,7 +460,7 @@ function! Fixedgq(lnum, count)
         return 1
     endif
 
-    " Put all the lines on one line and do normal spliting after that
+    " Put all the lines on one line and do normal splitting after that
     if l:count > 1
         while l:count > 1
             let l:count -= 1

runtime/indent/verilog.vim

@@ -76,7 +76,7 @@ function GetVerilogIndent()
     let vverb = 0
   endif
 
-  " Indent accoding to last line
+  " Indent according to last line
   " End of multiple-line comment
   if last_line =~ '\*/\s*$' && last_line !~ '/\*.\{-}\*/'
     let ind = ind - offset_comment1
@@ -219,7 +219,7 @@ function GetVerilogIndent()
 
   endif
 
-  " Return the indention
+  " Return the indentation
   return ind
 endfunction
 

runtime/indent/zimbu.vim

@@ -1,7 +1,7 @@
 " Vim indent file
 " Language:	Zimbu
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2016 Jan 25
+" Last Change:	2021 Sep 26
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")
@@ -16,7 +16,7 @@ setlocal indentkeys=0{,0},!^F,o,O,0=ELSE,0=ELSEIF,0=CASE,0=DEFAULT,0=FINALLY
 " We impose recommended defaults: no Tabs, 'shiftwidth' = 2
 setlocal sw=2 et
 
-let b:undo_indent = "setl et< sw< ai< indentkeys< indentexpr="
+let b:undo_indent = "setl ai< cin< et< indentkeys< indentexpr< lisp< sw<"
 
 " Only define the function once.
 if exists("*GetZimbuIndent")

runtime/keymap/kana.vim

@@ -364,7 +364,7 @@ ppu っぷ
 ppe っぺ
 ppo っぽ
 
-" Proceded by a small `tu' and followed by a small 'ya', 'yu' or 'yo'
+" Preceded by a small `tu' and followed by a small 'ya', 'yu' or 'yo'
 kkya っきゃ
 kkyu っきゅ
 kkyo っきょ
@@ -683,7 +683,7 @@ PPU ップ
 PPE ッペ
 PPO ッポ
 
-" Proceded by a small `tu' and followed by a small 'ya', 'yu' or 'yo'
+" Preceded by a small `tu' and followed by a small 'ya', 'yu' or 'yo'
 KKYA ッキャ
 KKYU ッキュ
 KKYO ッキョ

runtime/keymap/korean.vim

@@ -10,7 +10,7 @@
 " BUT, simply mapping each letter of Hangul with sequence of alphabet 1 by 1
 " can fail to combine Hangul jamo (conconants and vowels) right.
 " For example, sequentially pressing `ㅅㅓㅇㅜㄹㄷㅐㅎㅏㄱㅛ` can not only be
-" combined as `서울대학교`, but alse `성ㅜㄹ댛ㅏㄱ교`, which is totally 
+" combined as `서울대학교`, but also `성ㅜㄹ댛ㅏㄱ교`, which is totally 
 " nonsense. 
 " Though combining Hangul is deterministic with law that each letter must be 
 " one of (consonant + vowel) or (consonant + vowel + consonant), there is no

runtime/keymap/russian-jcukenwintype.vim

@@ -4,7 +4,7 @@
 " Useful mainly with utf-8 but may work with other encodings
 
 " Derived from russian-jcuken.vim by Artem Chuprina <ran@ran.pp.ru>
-" Typewriter variant of standart russian layout
+" Typewriter variant of standard russian layout
 " Maintainer:   Denis Proskurin <danwerspb@gmail.com>
 " Last Changed: 2015 May 15