patch 8.2.3582: reading uninitialized memory when giving spell suggestions

Problem:    Reading uninitialized memory when giving spell suggestions.
Solution:   Check that preword is not empty.

.github/CODEOWNERS

@@ -73,6 +73,7 @@ runtime/ftplugin/awk.vim		@dkearns
 runtime/ftplugin/basic.vim		@dkearns
 runtime/ftplugin/bst.vim		@tpope
 runtime/ftplugin/cfg.vim		@chrisbra
+runtime/ftplugin/csh.vim		@dkearns
 runtime/ftplugin/css.vim		@dkearns
 runtime/ftplugin/cucumber.vim		@tpope
 runtime/ftplugin/eiffel.vim		@dkearns
@@ -97,6 +98,7 @@ runtime/ftplugin/markdown.vim		@tpope
 runtime/ftplugin/matlab.vim		@cecamp
 runtime/ftplugin/meson.vim		@Liambeguin
 runtime/ftplugin/modula3.vim		@dkearns
+runtime/ftplugin/nginx.vim		@chr4
 runtime/ftplugin/nroff.vim		@a-vrma
 runtime/ftplugin/nsis.vim		@k-takata
 runtime/ftplugin/octave.vim		@dkearns
@@ -110,27 +112,49 @@ runtime/ftplugin/sass.vim		@tpope
 runtime/ftplugin/scss.vim		@tpope
 runtime/ftplugin/spec.vim		@ignatenkobrain
 runtime/ftplugin/systemverilog.vim	@Kocha
+runtime/ftplugin/tcsh.vim		@dkearns
 runtime/ftplugin/tidy.vim		@dkearns
 runtime/ftplugin/tmux.vim		@ericpruitt
+runtime/ftplugin/toml.vim		@averms
 runtime/ftplugin/typescript.vim		@dkearns
 runtime/ftplugin/typescriptreact.vim	@dkearns
 runtime/ftplugin/xml.vim		@chrisbra
 runtime/ftplugin/zsh.vim		@chrisbra
 runtime/indent/bst.vim			@tpope
+runtime/indent/cdl.vim			@dkearns
+runtime/indent/config.vim		@dkearns
+runtime/indent/css.vim			@dkearns
 runtime/indent/cucumber.vim		@tpope
+runtime/indent/d.vim			@dkearns
 runtime/indent/dosbatch.vim		@k-takata
+runtime/indent/dtd.vim			@dkearns
+runtime/indent/dylan.vim		@dkearns
+runtime/indent/elm.vim			@andys8
 runtime/indent/eruby.vim		@tpope @dkearns
+runtime/indent/eterm.vim		@dkearns
+runtime/indent/framescript.vim		@dkearns
 runtime/indent/gitconfig.vim		@tpope
 runtime/indent/haml.vim			@tpope
+runtime/indent/idlang.vim		@dkearns
+runtime/indent/ld.vim			@dkearns
 runtime/indent/liquid.vim		@tpope
+runtime/indent/make.vim			@dkearns
 runtime/indent/meson.vim		@Liambeguin
+runtime/indent/mma.vim			@dkearns
+runtime/indent/nginx.vim		@chr4
 runtime/indent/nsis.vim			@k-takata
+runtime/indent/occam.vim		@dkearns
+runtime/indent/postscr.vim		@dkearns
+runtime/indent/prolog.vim		@dkearns
 runtime/indent/ps1.vim			@heaths
+runtime/indent/readline.vim		@dkearns
 runtime/indent/ruby.vim			@AndrewRadev @dkearns
 runtime/indent/sass.vim			@tpope
 runtime/indent/scss.vim			@tpope
 runtime/indent/sh.vim			@chrisbra
 runtime/indent/systemverilog.vim	@Kocha
+runtime/indent/tcl.vim			@dkearns
+runtime/indent/tcsh.vim			@dkearns
 runtime/indent/teraterm.vim		@k-takata
 runtime/indent/xml.vim			@chrisbra
 runtime/indent/zsh.vim			@chrisbra
@@ -145,6 +169,7 @@ runtime/plugin/vimballPlugin.vim	@cecamp
 runtime/plugin/zipPlugin.vim		@cecamp
 runtime/syntax/aidl.vim			@dpelle
 runtime/syntax/amiga.vim		@cecamp
+runtime/syntax/arduino.vim		@johshoff
 runtime/syntax/asm.vim			@dkearns
 runtime/syntax/asmh8300.vim		@dkearns
 runtime/syntax/asterisk.vim		@jaunis
@@ -192,6 +217,7 @@ runtime/syntax/markdown.vim		@tpope
 runtime/syntax/meson.vim		@Liambeguin
 runtime/syntax/modula3.vim		@dkearns
 runtime/syntax/netrw.vim		@cecamp
+runtime/syntax/nginx.vim		@chr4
 runtime/syntax/nroff.vim		@jmarshall
 runtime/syntax/nsis.vim			@k-takata
 runtime/syntax/pascal.vim		@dkearns
@@ -217,10 +243,12 @@ runtime/syntax/sshdconfig.vim		@Jakuje
 runtime/syntax/sudoers.vim		@e-kwsm
 runtime/syntax/systemverilog.vim	@Kocha
 runtime/syntax/tags.vim			@cecamp
+runtime/syntax/tcsh.vim			@dkearns
 runtime/syntax/teraterm.vim		@k-takata
 runtime/syntax/tex.vim			@cecamp
 runtime/syntax/tidy.vim			@dkearns
 runtime/syntax/tmux.vim			@ericpruitt
+runtime/syntax/toml.vim			@averms
 runtime/syntax/vim.vim			@cecamp
 runtime/syntax/wget.vim			@dkearns
 runtime/syntax/xbl.vim			@dkearns

.github/ISSUE_TEMPLATE/bug_report.md

@@ -1,34 +0,0 @@
----
-name: Bug report
-about: Create a report to help us improve Vim
-title: ''
-labels: ''
-
----
-
-_Instructions: Replace the template text and remove irrelevant text (including this line)_
-
-**Describe the bug**
-A clear and concise description of what the bug is.
-(Issues related to the runtime files should be reported to their maintainer, check the file header.)
-
-**To Reproduce**
-Detailed steps to reproduce the behavior:
-1. Run `vim --clean` (or `gvim --clean`, etc.)
-2. Edit `filename`
-3. Type '....'
-4. Describe the error
-
-**Expected behavior**
-A clear and concise description of what you expected to happen.
-
-**Screenshots**
-If applicable, copy/paste the text or add screenshots to help explain your problem.
-
-**Environment (please complete the following information):**
- - Vim version [e.g. 8.1.1234] (Or paste the result of `vim --version`.)
- - OS: [e.g. Ubuntu 18.04, Windows 10 1809, macOS 10.14]
- - Terminal: [e.g. GNOME Terminal, mintty, iTerm2, tmux, GNU screen] (Use GUI if you use the GUI.)
-
-**Additional context**
-Add any other context about the problem here.

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -0,0 +1,47 @@
+---
+name: Bug report
+description: Create a report to help us improve Vim.
+labels: [bug]
+
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Thanks for reporting issues of Vim!
+        
+        To make it easier for us to help you please enter detailed information below.
+  - type: textarea
+    attributes:
+      label: Steps to reproduce
+      placeholder: |
+        1. 
+        2. 
+        3. 
+        4. 
+    validations:
+      required: true
+  - type: textarea
+    attributes:
+      label: Expected behaviour
+      placeholder: A clear and concise description of what you expected to happen.
+    validations:
+      required: true
+  - type: input
+    attributes:
+      label: Operating system
+      description: >
+        Your operating system name, version and desktop environment.
+    validations:
+      required: true
+  - type: input
+    attributes:
+      label: Version of Vim
+      description: >
+        The name of your development environment, version. [e.g. GNOME Terminal (v0.0.0000)]
+    validations:
+      required: true
+  - type: textarea
+    attributes:
+      label: Logs and stack traces
+      placeholder: Insert log or other text here (if necessary)
+      render: shell

.github/workflows/ci.yml

@@ -40,6 +40,7 @@ jobs:
             compiler: gcc
             coverage: true
             extra: testgui
+            uchar: true
           - features: huge
             compiler: clang
             extra: asan
@@ -80,7 +81,7 @@ jobs:
           wget -O - https://apt.llvm.org/llvm-snapshot.gpg.key | sudo apt-key add -
           . /etc/lsb-release
           sudo add-apt-repository -y "deb http://apt.llvm.org/${DISTRIB_CODENAME}/ llvm-toolchain-${DISTRIB_CODENAME}-11 main"
-          sudo apt-get install -y clang-11
+          sudo apt-get install -y clang-11 llvm-11
           sudo update-alternatives --install /usr/bin/clang clang /usr/bin/clang-11 100
           sudo update-alternatives --set clang /usr/bin/clang-11
           sudo update-alternatives --install /usr/bin/llvm-cov llvm-cov /usr/bin/llvm-cov-11 100
@@ -111,10 +112,14 @@ jobs:
             ;;
           esac
 
+          CFLAGS=""
           if ${{ matrix.coverage == true }}; then
-            echo "CFLAGS=--coverage -DUSE_GCOV_FLUSH"
+            CFLAGS="$CFLAGS --coverage -DUSE_GCOV_FLUSH"
             echo "LDFLAGS=--coverage"
           fi
+          if ${{ matrix.uchar == true }}; then
+            CFLAGS="$CFLAGS -funsigned-char"
+          fi
           if ${{ contains(matrix.extra, 'testgui') }}; then
             echo "TEST=-C src testgui"
           fi
@@ -130,6 +135,7 @@ jobs:
           if ${{ contains(matrix.extra, 'vimtags') }}; then
             echo "TEST=-C runtime/doc vimtags VIMEXE=../../${SRCDIR}/vim"
           fi
+          echo "CFLAGS=$CFLAGS"
           ) >> $GITHUB_ENV
 
       - name: Set up system
@@ -201,18 +207,18 @@ jobs:
           do_test() { sg audio "sg $(id -gn) '$*'"; }
           do_test make ${SHADOWOPT} ${TEST}
 
-      - name: Coveralls
-        if: matrix.coverage && success() && github.event_name != 'pull_request'
-        env:
-          COVERALLS_REPO_TOKEN: ${{ secrets.COVERALLS_REPO_TOKEN }}
-          COVERALLS_PARALLEL: true
-          TRAVIS_JOB_ID: ${{ github.run_id }}
-        run: |
-          sudo apt-get install -y python3-setuptools python3-wheel
-          sudo -H pip3 install pip -U
-          # needed for https support for coveralls building cffi only works with gcc, not with clang
-          CC=gcc pip3 install --user cpp-coveralls pyopenssl ndg-httpsclient pyasn1
-          ~/.local/bin/coveralls -b "${SRCDIR}" -x .xs -e "${SRCDIR}"/if_perl.c -e "${SRCDIR}"/xxd -e "${SRCDIR}"/libvterm --encodings utf-8
+      #      - name: Coveralls
+      #        if: matrix.coverage && success() && github.event_name != 'pull_request'
+      #        env:
+      #          COVERALLS_REPO_TOKEN: ${{ secrets.COVERALLS_REPO_TOKEN }}
+      #          COVERALLS_PARALLEL: true
+      #          TRAVIS_JOB_ID: ${{ github.run_id }}
+      #        run: |
+      #          sudo apt-get install -y python3-setuptools python3-wheel
+      #          sudo -H pip3 install pip -U
+      #          # needed for https support for coveralls building cffi only works with gcc, not with clang
+      #          CC=gcc pip3 install --user cpp-coveralls pyopenssl ndg-httpsclient pyasn1
+      #          ~/.local/bin/coveralls -b "${SRCDIR}" -x .xs -e "${SRCDIR}"/if_perl.c -e "${SRCDIR}"/xxd -e "${SRCDIR}"/libvterm --encodings utf-8
 
       - name: Codecov
         if: matrix.coverage && success()
@@ -228,18 +234,18 @@ jobs:
             false # in order to fail a job
           done
 
-  coveralls:
-    runs-on: ubuntu-18.04
-
-    needs: linux
-    if: always() && github.event_name != 'pull_request'
-
-    steps:
-      - name: Parallel finished
-        env:
-          COVERALLS_REPO_TOKEN: ${{ secrets.COVERALLS_REPO_TOKEN }}
-        run: |
-          curl -k "https://coveralls.io/webhook?repo_token=${COVERALLS_REPO_TOKEN}" -d "payload[build_num]=${GITHUB_RUN_ID}&payload[status]=done"
+  #  coveralls:
+  #    runs-on: ubuntu-18.04
+  #
+  #    needs: linux
+  #    if: always() && github.event_name != 'pull_request'
+  #
+  #    steps:
+  #      - name: Parallel finished
+  #        env:
+  #          COVERALLS_REPO_TOKEN: ${{ secrets.COVERALLS_REPO_TOKEN }}
+  #        run: |
+  #          curl -k "https://coveralls.io/webhook?repo_token=${COVERALLS_REPO_TOKEN}" -d "payload[build_num]=${GITHUB_RUN_ID}&payload[status]=done"
 
   macos:
     runs-on: macos-latest

Filelist

@@ -798,6 +798,7 @@ RT_SCRIPTS =	\
 		runtime/autoload/xml/*.vim \
 		runtime/colors/*.vim \
 		runtime/colors/README.txt \
+		runtime/colors/lists/*.vim \
 		runtime/colors/tools/*.vim \
 		runtime/compiler/*.vim \
 		runtime/compiler/README.txt \
@@ -850,7 +851,6 @@ RT_AMI_DOS =	\
 # DOS runtime (also in the extra archive)
 RT_DOS =	\
 		README_dos.txt \
-		runtime/rgb.txt \
 		vimtutor.bat \
 
 # DOS runtime without CR-LF translation (also in the extra archive)

READMEdir/README_extra.txt

@@ -26,7 +26,6 @@ src/os_win32.*		Files for the Win32 port.
 src/gui_w32.*		Files for the Win32 GUI.
 src/gui_w48.*		Files for the Win32 and Win16 GUI.
 src/Make_mvc.mak	MS Visual C++ makefile for the Win32 GUI.
-runtime/rgb.txt		File with color definitions for the Win32 GUI.
 
 src/if_ole.*		OLE automation interface, for MS Windows 95 and NT.
 

nsis/gvim.nsi

@@ -357,7 +357,6 @@ Section "$(str_section_exe)" id_section_exe
 	File ..\README.txt
 	File ..\uninstall.txt
 	File ${VIMRT}\*.vim
-	File ${VIMRT}\rgb.txt
 
 	File ${VIMTOOLS}\diff.exe
 	File ${VIMTOOLS}\winpty${BIT}.dll
@@ -367,6 +366,8 @@ Section "$(str_section_exe)" id_section_exe
 	File ${VIMRT}\colors\*.*
 	SetOutPath $0\colors\tools
 	File ${VIMRT}\colors\tools\*.*
+	SetOutPath $0\colors\lists
+	File ${VIMRT}\colors\lists\*.*
 
 	SetOutPath $0\compiler
 	File ${VIMRT}\compiler\*.*

runtime/autoload/csscomplete.vim

@@ -4,7 +4,7 @@
 "           plus CSS Speech Module <http://www.w3.org/TR/css3-speech/>
 " Maintainer: Kao, Wei-Ko(othree) ( othree AT gmail DOT com )
 " Original Author: Mikolaj Machowski ( mikmach AT wp DOT pl )
-" Last Change: 2018 Jul 02
+" Last Change: 2021 Sep 21
 
 let s:values = split("all additive-symbols align-content align-items align-self animation animation-delay animation-direction animation-duration animation-fill-mode animation-iteration-count animation-name animation-play-state animation-timing-function backface-visibility background background-attachment background-blend-mode background-clip background-color background-image background-origin background-position background-repeat background-size block-size border border-block-end border-block-end-color border-block-end-style border-block-end-width border-block-start border-block-start-color border-block-start-style border-block-start-width border-bottom border-bottom-color border-bottom-left-radius border-bottom-right-radius border-bottom-style border-bottom-width border-collapse border-color border-image border-image-outset border-image-repeat border-image-slice border-image-source border-image-width border-inline-end border-inline-end-color border-inline-end-style border-inline-end-width border-inline-start border-inline-start-color border-inline-start-style border-inline-start-width border-left border-left-color border-left-style border-left-width border-radius border-right border-right-color border-right-style border-right-width border-spacing border-style border-top border-top-color border-top-left-radius border-top-right-radius border-top-style border-top-width border-width bottom box-decoration-break box-shadow box-sizing break-after break-before break-inside caption-side clear clip clip-path color columns column-count column-fill column-gap column-rule column-rule-color column-rule-style column-rule-width column-span column-width content counter-increment counter-reset cue cue-before cue-after cursor direction display empty-cells fallback filter flex flex-basis flex-direction flex-flow flex-grow flex-shrink flex-wrap float font font-family font-feature-settings font-kerning font-language-override font-size font-size-adjust font-stretch font-style font-synthesis font-variant font-variant-alternates font-variant-caps font-variant-east-asian font-variant-ligatures font-variant-numeric font-variant-position font-weight grid grid-area grid-auto-columns grid-auto-flow grid-auto-position grid-auto-rows grid-column grid-column-start grid-column-end grid-row grid-row-start grid-row-end grid-template grid-template-areas grid-template-rows grid-template-columns height hyphens image-rendering image-resolution image-orientation ime-mode inline-size isolation justify-content left letter-spacing line-break line-height list-style list-style-image list-style-position list-style-type margin margin-block-end margin-block-start margin-bottom margin-inline-end margin-inline-start margin-left margin-right margin-top marks mask mask-type max-block-size max-height max-inline-size max-width max-zoom min-block-size min-height min-inline-size min-width min-zoom mix-blend-mode negative object-fit object-position offset-block-end offset-block-start offset-inline-end offset-inline-start opacity order orientation orphans outline outline-color outline-offset outline-style outline-width overflow overflow-wrap overflow-x overflow-y pad padding padding-block-end padding-block-start padding-bottom padding-inline-end padding-inline-start padding-left padding-right padding-top page-break-after page-break-before page-break-inside pause-before pause-after pause perspective perspective-origin pointer-events position prefix quotes range resize rest rest-before rest-after right ruby-align ruby-merge ruby-position scroll-behavior scroll-snap-coordinate scroll-snap-destination scroll-snap-points-x scroll-snap-points-y scroll-snap-type scroll-snap-type-x scroll-snap-type-y shape-image-threshold shape-margin shape-outside speak speak-as suffix symbols system table-layout tab-size text-align text-align-last text-combine-upright text-decoration text-decoration-color text-decoration-line text-emphasis text-emphasis-color text-emphasis-position text-emphasis-style text-indent text-orientation text-overflow text-rendering text-shadow text-transform text-underline-position top touch-action transform transform-box transform-origin transform-style transition transition-delay transition-duration transition-property transition-timing-function unicode-bidi unicode-range user-zoom vertical-align visibility voice-balance voice-duration voice-family voice-pitch voice-rate voice-range voice-stress voice-volume white-space widows width will-change word-break word-spacing word-wrap writing-mode z-index zoom")
 
@@ -38,12 +38,12 @@ function! csscomplete#CompleteCSS(findstart, base)
   if exists("b:compl_context")
     let line = getline('.')
     let compl_begin = col('.') - 2
-    let after = line[compl_begin:]
+    let b:after = line[compl_begin:]
     let line = b:compl_context
     unlet! b:compl_context
   else
     let line = a:base
-    let after = ''
+    let b:after = ''
   endif
 
   let res = []

runtime/autoload/netrw.vim

@@ -1751,7 +1751,8 @@ fun! s:NetrwOptionsSafe(islocal)
   if &cpo =~ 'a' | call s:NetrwSetSafeSetting("&cpo",substitute(&cpo,'a','','g')) | endif
   if &cpo =~ 'A' | call s:NetrwSetSafeSetting("&cpo",substitute(&cpo,'A','','g')) | endif
   setl fo=nroql2
-  call s:NetrwSetSafeSetting("&go","begmr")
+  " call s:NetrwSetSafeSetting("&go","begmr")
+  if &go =~ '\ca' | call s:NetrwSetSafeSetting("&go",substitute(&go,'\ca','','g')) | endif
   call s:NetrwSetSafeSetting("&l:hid",0)
   call s:NetrwSetSafeSetting("&l:im",0)
   setl isk+=@ isk+=* isk+=/

runtime/colors/README.txt

@@ -87,4 +87,5 @@ please check the following items:
 - In the GUI, is it easy to find the cursor, also in a file with lots of
   syntax highlighting?
 - Do not use hard coded escape sequences, these will not work in other
-  terminals.  Always use color names or #RRGGBB for the GUI.
+  terminals.  Always use color names or #RRGGBB for the GUI. See v:colornames
+  for details on how to define your own color names.

runtime/colors/lists/csscolors.vim

@@ -0,0 +1,166 @@
+" Maintainer:  Drew Vogel <dvogel@sidejump.org>
+" Last Change: 2021 Jul 25
+
+" Similar in spirit to rgb.txt, this plugin establishes a human-friendly name
+" for every color listed in the CSS standard:
+"
+" https://www.w3.org/TR/css-color-3/
+
+let s:keepcpo= &cpo
+set cpo&vim
+
+call extend(v:colornames, {
+			\ 'css_black': '#000000',
+			\ 'css_silver': '#c0c0c0',
+			\ 'css_gray': '#808080',
+			\ 'css_white': '#FFFFFF',
+			\ 'css_maroon': '#800000',
+			\ 'css_red': '#FF0000',
+			\ 'css_purple': '#800080',
+			\ 'css_fuchsia': '#FF00FF',
+			\ 'css_green': '#008000',
+			\ 'css_lime': '#00FF00',
+			\ 'css_olive': '#808000',
+			\ 'css_yellow': '#FFFF00',
+			\ 'css_navy': '#000080',
+			\ 'css_blue': '#0000FF',
+			\ 'css_teal': '#008080',
+			\ 'css_aqua': '#00FFFF',
+			\
+			\ 'css_aliceblue': '#f0f8ff',
+			\ 'css_antiquewhite': '#faebd7',
+			\ 'css_aquamarine': '#7fffd4',
+			\ 'css_azure': '#f0ffff',
+			\ 'css_beige': '#f5f5dc',
+			\ 'css_bisque': '#ffe4c4',
+			\ 'css_blanchedalmond': '#ffebcd',
+			\ 'css_blueviolet': '#8a2be2',
+			\ 'css_brown': '#a52a2a',
+			\ 'css_burlywood': '#deb887',
+			\ 'css_cadetblue': '#5f9ea0',
+			\ 'css_chartreuse': '#7fff00',
+			\ 'css_chocolate': '#d2691e',
+			\ 'css_coral': '#ff7f50',
+			\ 'css_cornflowerblue': '#6495ed',
+			\ 'css_cornsilk': '#fff8dc',
+			\ 'css_crimson': '#dc143c',
+			\ 'css_cyan': '#00ffff',
+			\ 'css_darkblue': '#00008b',
+			\ 'css_darkcyan': '#008b8b',
+			\ 'css_darkgoldenrod': '#b8860b',
+			\ 'css_darkgray': '#a9a9a9',
+			\ 'css_darkgreen': '#006400',
+			\ 'css_darkgrey': '#a9a9a9',
+			\ 'css_darkkhaki': '#bdb76b',
+			\ 'css_darkmagenta': '#8b008b',
+			\ 'css_darkolivegreen': '#556b2f',
+			\ 'css_darkorange': '#ff8c00',
+			\ 'css_darkorchid': '#9932cc',
+			\ 'css_darkred': '#8b0000',
+			\ 'css_darksalmon': '#e9967a',
+			\ 'css_darkseagreen': '#8fbc8f',
+			\ 'css_darkslateblue': '#483d8b',
+			\ 'css_darkslategray': '#2f4f4f',
+			\ 'css_darkslategrey': '#2f4f4f',
+			\ 'css_darkturquoise': '#00ced1',
+			\ 'css_darkviolet': '#9400d3',
+			\ 'css_deeppink': '#ff1493',
+			\ 'css_deepskyblue': '#00bfff',
+			\ 'css_dimgray': '#696969',
+			\ 'css_dimgrey': '#696969',
+			\ 'css_dodgerblue': '#1e90ff',
+			\ 'css_firebrick': '#b22222',
+			\ 'css_floralwhite': '#fffaf0',
+			\ 'css_forestgreen': '#228b22',
+			\ 'css_gainsboro': '#dcdcdc',
+			\ 'css_ghostwhite': '#f8f8ff',
+			\ 'css_gold': '#ffd700',
+			\ 'css_goldenrod': '#daa520',
+			\ 'css_greenyellow': '#adff2f',
+			\ 'css_grey': '#808080',
+			\ 'css_honeydew': '#f0fff0',
+			\ 'css_hotpink': '#ff69b4',
+			\ 'css_indianred': '#cd5c5c',
+			\ 'css_indigo': '#4b0082',
+			\ 'css_ivory': '#fffff0',
+			\ 'css_khaki': '#f0e68c',
+			\ 'css_lavender': '#e6e6fa',
+			\ 'css_lavenderblush': '#fff0f5',
+			\ 'css_lawngreen': '#7cfc00',
+			\ 'css_lemonchiffon': '#fffacd',
+			\ 'css_lightblue': '#add8e6',
+			\ 'css_lightcoral': '#f08080',
+			\ 'css_lightcyan': '#e0ffff',
+			\ 'css_lightgoldenrodyellow': '#fafad2',
+			\ 'css_lightgray': '#d3d3d3',
+			\ 'css_lightgreen': '#90ee90',
+			\ 'css_lightgrey': '#d3d3d3',
+			\ 'css_lightpink': '#ffb6c1',
+			\ 'css_lightsalmon': '#ffa07a',
+			\ 'css_lightseagreen': '#20b2aa',
+			\ 'css_lightskyblue': '#87cefa',
+			\ 'css_lightslategray': '#778899',
+			\ 'css_lightslategrey': '#778899',
+			\ 'css_lightsteelblue': '#b0c4de',
+			\ 'css_lightyellow': '#ffffe0',
+			\ 'css_limegreen': '#32cd32',
+			\ 'css_linen': '#faf0e6',
+			\ 'css_magenta': '#ff00ff',
+			\ 'css_mediumaquamarine': '#66cdaa',
+			\ 'css_mediumblue': '#0000cd',
+			\ 'css_mediumorchid': '#ba55d3',
+			\ 'css_mediumpurple': '#9370db',
+			\ 'css_mediumseagreen': '#3cb371',
+			\ 'css_mediumslateblue': '#7b68ee',
+			\ 'css_mediumspringgreen': '#00fa9a',
+			\ 'css_mediumturquoise': '#48d1cc',
+			\ 'css_mediumvioletred': '#c71585',
+			\ 'css_midnightblue': '#191970',
+			\ 'css_mintcream': '#f5fffa',
+			\ 'css_mistyrose': '#ffe4e1',
+			\ 'css_moccasin': '#ffe4b5',
+			\ 'css_navajowhite': '#ffdead',
+			\ 'css_oldlace': '#fdf5e6',
+			\ 'css_olivedrab': '#6b8e23',
+			\ 'css_orange': '#ffa500',
+			\ 'css_orangered': '#ff4500',
+			\ 'css_orchid': '#da70d6',
+			\ 'css_palegoldenrod': '#eee8aa',
+			\ 'css_palegreen': '#98fb98',
+			\ 'css_paleturquoise': '#afeeee',
+			\ 'css_palevioletred': '#db7093',
+			\ 'css_papayawhip': '#ffefd5',
+			\ 'css_peachpuff': '#ffdab9',
+			\ 'css_peru': '#cd853f',
+			\ 'css_pink': '#ffc0cb',
+			\ 'css_plum': '#dda0dd',
+			\ 'css_powderblue': '#b0e0e6',
+			\ 'css_rosybrown': '#bc8f8f',
+			\ 'css_royalblue': '#4169e1',
+			\ 'css_saddlebrown': '#8b4513',
+			\ 'css_salmon': '#fa8072',
+			\ 'css_sandybrown': '#f4a460',
+			\ 'css_seagreen': '#2e8b57',
+			\ 'css_seashell': '#fff5ee',
+			\ 'css_sienna': '#a0522d',
+			\ 'css_skyblue': '#87ceeb',
+			\ 'css_slateblue': '#6a5acd',
+			\ 'css_slategray': '#708090',
+			\ 'css_slategrey': '#708090',
+			\ 'css_snow': '#fffafa',
+			\ 'css_springgreen': '#00ff7f',
+			\ 'css_steelblue': '#4682b4',
+			\ 'css_tan': '#d2b48c',
+			\ 'css_thistle': '#d8bfd8',
+			\ 'css_tomato': '#ff6347',
+			\ 'css_turquoise': '#40e0d0',
+			\ 'css_violet': '#ee82ee',
+			\ 'css_wheat': '#f5deb3',
+			\ 'css_whitesmoke': '#f5f5f5',
+			\ 'css_yellowgreen': '#9acd32',
+			\ }, 'keep')
+
+let &cpo= s:keepcpo
+unlet s:keepcpo
+
+"vim: sw=4

runtime/colors/lists/default.vim

@@ -0,0 +1,801 @@
+" Maintainer:  Drew Vogel <dvogel@sidejump.org>
+" Last Change: 2021 Jul 25
+"
+" Replaced rgb.txt as the source of de facto standard color names. This is
+" sourced each time the colorscheme command is run. It is also sourced each
+" time the highlight command fails to recognize a gui color. You can override
+" these colors by introducing a new colors/lists/default.vim file earlier in
+" the runtimepath.
+
+let s:keepcpo= &cpo
+set cpo&vim
+
+call extend(v:colornames, {
+			\ 'snow': '#fffafa',
+			\ 'ghost white': '#f8f8ff',
+			\ 'ghostwhite': '#f8f8ff',
+			\ 'white smoke': '#f5f5f5',
+			\ 'whitesmoke': '#f5f5f5',
+			\ 'gainsboro': '#dcdcdc',
+			\ 'floral white': '#fffaf0',
+			\ 'floralwhite': '#fffaf0',
+			\ 'old lace': '#fdf5e6',
+			\ 'oldlace': '#fdf5e6',
+			\ 'linen': '#faf0e6',
+			\ 'antique white': '#faebd7',
+			\ 'antiquewhite': '#faebd7',
+			\ 'papaya whip': '#ffefd5',
+			\ 'papayawhip': '#ffefd5',
+			\ 'blanched almond': '#ffebcd',
+			\ 'blanchedalmond': '#ffebcd',
+			\ 'bisque': '#ffe4c4',
+			\ 'peach puff': '#ffdab9',
+			\ 'peachpuff': '#ffdab9',
+			\ 'navajo white': '#ffdead',
+			\ 'navajowhite': '#ffdead',
+			\ 'moccasin': '#ffe4b5',
+			\ 'cornsilk': '#fff8dc',
+			\ 'ivory': '#fffff0',
+			\ 'lemon chiffon': '#fffacd',
+			\ 'lemonchiffon': '#fffacd',
+			\ 'seashell': '#fff5ee',
+			\ 'honeydew': '#f0fff0',
+			\ 'mint cream': '#f5fffa',
+			\ 'mintcream': '#f5fffa',
+			\ 'azure': '#f0ffff',
+			\ 'alice blue': '#f0f8ff',
+			\ 'aliceblue': '#f0f8ff',
+			\ 'lavender': '#e6e6fa',
+			\ 'lavender blush': '#fff0f5',
+			\ 'lavenderblush': '#fff0f5',
+			\ 'misty rose': '#ffe4e1',
+			\ 'mistyrose': '#ffe4e1',
+			\ 'white': '#ffffff',
+			\ 'black': '#000000',
+			\ 'dark slate gray': '#2f4f4f',
+			\ 'darkslategray': '#2f4f4f',
+			\ 'dark slate grey': '#2f4f4f',
+			\ 'darkslategrey': '#2f4f4f',
+			\ 'dim gray': '#696969',
+			\ 'dimgray': '#696969',
+			\ 'dim grey': '#696969',
+			\ 'dimgrey': '#696969',
+			\ 'slate gray': '#708090',
+			\ 'slategray': '#708090',
+			\ 'slate grey': '#708090',
+			\ 'slategrey': '#708090',
+			\ 'light slate gray': '#778899',
+			\ 'lightslategray': '#778899',
+			\ 'light slate grey': '#778899',
+			\ 'lightslategrey': '#778899',
+			\ 'gray': '#bebebe',
+			\ 'grey': '#bebebe',
+			\ 'x11 gray': '#bebebe',
+			\ 'x11gray': '#bebebe',
+			\ 'x11 grey': '#bebebe',
+			\ 'x11grey': '#bebebe',
+			\ 'web gray': '#808080',
+			\ 'webgray': '#808080',
+			\ 'web grey': '#808080',
+			\ 'webgrey': '#808080',
+			\ 'light grey': '#d3d3d3',
+			\ 'lightgrey': '#d3d3d3',
+			\ 'light gray': '#d3d3d3',
+			\ 'lightgray': '#d3d3d3',
+			\ 'midnight blue': '#191970',
+			\ 'midnightblue': '#191970',
+			\ 'navy': '#000080',
+			\ 'navy blue': '#000080',
+			\ 'navyblue': '#000080',
+			\ 'cornflower blue': '#6495ed',
+			\ 'cornflowerblue': '#6495ed',
+			\ 'dark slate blue': '#483d8b',
+			\ 'darkslateblue': '#483d8b',
+			\ 'slate blue': '#6a5acd',
+			\ 'slateblue': '#6a5acd',
+			\ 'medium slate blue': '#7b68ee',
+			\ 'mediumslateblue': '#7b68ee',
+			\ 'light slate blue': '#8470ff',
+			\ 'lightslateblue': '#8470ff',
+			\ 'medium blue': '#0000cd',
+			\ 'mediumblue': '#0000cd',
+			\ 'royal blue': '#4169e1',
+			\ 'royalblue': '#4169e1',
+			\ 'blue': '#0000ff',
+			\ 'dodger blue': '#1e90ff',
+			\ 'dodgerblue': '#1e90ff',
+			\ 'deep sky blue': '#00bfff',
+			\ 'deepskyblue': '#00bfff',
+			\ 'sky blue': '#87ceeb',
+			\ 'skyblue': '#87ceeb',
+			\ 'light sky blue': '#87cefa',
+			\ 'lightskyblue': '#87cefa',
+			\ 'steel blue': '#4682b4',
+			\ 'steelblue': '#4682b4',
+			\ 'light steel blue': '#b0c4de',
+			\ 'lightsteelblue': '#b0c4de',
+			\ 'light blue': '#add8e6',
+			\ 'lightblue': '#add8e6',
+			\ 'powder blue': '#b0e0e6',
+			\ 'powderblue': '#b0e0e6',
+			\ 'pale turquoise': '#afeeee',
+			\ 'paleturquoise': '#afeeee',
+			\ 'dark turquoise': '#00ced1',
+			\ 'darkturquoise': '#00ced1',
+			\ 'medium turquoise': '#48d1cc',
+			\ 'mediumturquoise': '#48d1cc',
+			\ 'turquoise': '#40e0d0',
+			\ 'cyan': '#00ffff',
+			\ 'aqua': '#00ffff',
+			\ 'light cyan': '#e0ffff',
+			\ 'lightcyan': '#e0ffff',
+			\ 'cadet blue': '#5f9ea0',
+			\ 'cadetblue': '#5f9ea0',
+			\ 'medium aquamarine': '#66cdaa',
+			\ 'mediumaquamarine': '#66cdaa',
+			\ 'aquamarine': '#7fffd4',
+			\ 'dark green': '#006400',
+			\ 'darkgreen': '#006400',
+			\ 'dark olive green': '#556b2f',
+			\ 'darkolivegreen': '#556b2f',
+			\ 'dark sea green': '#8fbc8f',
+			\ 'darkseagreen': '#8fbc8f',
+			\ 'sea green': '#2e8b57',
+			\ 'seagreen': '#2e8b57',
+			\ 'medium sea green': '#3cb371',
+			\ 'mediumseagreen': '#3cb371',
+			\ 'light sea green': '#20b2aa',
+			\ 'lightseagreen': '#20b2aa',
+			\ 'pale green': '#98fb98',
+			\ 'palegreen': '#98fb98',
+			\ 'spring green': '#00ff7f',
+			\ 'springgreen': '#00ff7f',
+			\ 'lawn green': '#7cfc00',
+			\ 'lawngreen': '#7cfc00',
+			\ 'green': '#00ff00',
+			\ 'lime': '#00ff00',
+			\ 'x11 green': '#00ff00',
+			\ 'x11green': '#00ff00',
+			\ 'web green': '#008000',
+			\ 'webgreen': '#008000',
+			\ 'chartreuse': '#7fff00',
+			\ 'medium spring green': '#00fa9a',
+			\ 'mediumspringgreen': '#00fa9a',
+			\ 'green yellow': '#adff2f',
+			\ 'greenyellow': '#adff2f',
+			\ 'lime green': '#32cd32',
+			\ 'limegreen': '#32cd32',
+			\ 'yellow green': '#9acd32',
+			\ 'yellowgreen': '#9acd32',
+			\ 'forest green': '#228b22',
+			\ 'forestgreen': '#228b22',
+			\ 'olive drab': '#6b8e23',
+			\ 'olivedrab': '#6b8e23',
+			\ 'dark khaki': '#bdb76b',
+			\ 'darkkhaki': '#bdb76b',
+			\ 'khaki': '#f0e68c',
+			\ 'pale goldenrod': '#eee8aa',
+			\ 'palegoldenrod': '#eee8aa',
+			\ 'light goldenrod yellow': '#fafad2',
+			\ 'lightgoldenrodyellow': '#fafad2',
+			\ 'light yellow': '#ffffe0',
+			\ 'lightyellow': '#ffffe0',
+			\ 'yellow': '#ffff00',
+			\ 'gold': '#ffd700',
+			\ 'light goldenrod': '#eedd82',
+			\ 'lightgoldenrod': '#eedd82',
+			\ 'goldenrod': '#daa520',
+			\ 'dark goldenrod': '#b8860b',
+			\ 'darkgoldenrod': '#b8860b',
+			\ 'rosy brown': '#bc8f8f',
+			\ 'rosybrown': '#bc8f8f',
+			\ 'indian red': '#cd5c5c',
+			\ 'indianred': '#cd5c5c',
+			\ 'saddle brown': '#8b4513',
+			\ 'saddlebrown': '#8b4513',
+			\ 'sienna': '#a0522d',
+			\ 'peru': '#cd853f',
+			\ 'burlywood': '#deb887',
+			\ 'beige': '#f5f5dc',
+			\ 'wheat': '#f5deb3',
+			\ 'sandy brown': '#f4a460',
+			\ 'sandybrown': '#f4a460',
+			\ 'tan': '#d2b48c',
+			\ 'chocolate': '#d2691e',
+			\ 'firebrick': '#b22222',
+			\ 'brown': '#a52a2a',
+			\ 'dark salmon': '#e9967a',
+			\ 'darksalmon': '#e9967a',
+			\ 'salmon': '#fa8072',
+			\ 'light salmon': '#ffa07a',
+			\ 'lightsalmon': '#ffa07a',
+			\ 'orange': '#ffa500',
+			\ 'dark orange': '#ff8c00',
+			\ 'darkorange': '#ff8c00',
+			\ 'coral': '#ff7f50',
+			\ 'light coral': '#f08080',
+			\ 'lightcoral': '#f08080',
+			\ 'tomato': '#ff6347',
+			\ 'orange red': '#ff4500',
+			\ 'orangered': '#ff4500',
+			\ 'red': '#ff0000',
+			\ 'hot pink': '#ff69b4',
+			\ 'hotpink': '#ff69b4',
+			\ 'deep pink': '#ff1493',
+			\ 'deeppink': '#ff1493',
+			\ 'pink': '#ffc0cb',
+			\ 'light pink': '#ffb6c1',
+			\ 'lightpink': '#ffb6c1',
+			\ 'pale violet red': '#db7093',
+			\ 'palevioletred': '#db7093',
+			\ 'maroon': '#b03060',
+			\ 'x11 maroon': '#b03060',
+			\ 'x11maroon': '#b03060',
+			\ 'web maroon': '#800000',
+			\ 'webmaroon': '#800000',
+			\ 'medium violet red': '#c71585',
+			\ 'mediumvioletred': '#c71585',
+			\ 'violet red': '#d02090',
+			\ 'violetred': '#d02090',
+			\ 'magenta': '#ff00ff',
+			\ 'fuchsia': '#ff00ff',
+			\ 'violet': '#ee82ee',
+			\ 'plum': '#dda0dd',
+			\ 'orchid': '#da70d6',
+			\ 'medium orchid': '#ba55d3',
+			\ 'mediumorchid': '#ba55d3',
+			\ 'dark orchid': '#9932cc',
+			\ 'darkorchid': '#9932cc',
+			\ 'dark violet': '#9400d3',
+			\ 'darkviolet': '#9400d3',
+			\ 'blue violet': '#8a2be2',
+			\ 'blueviolet': '#8a2be2',
+			\ 'purple': '#a020f0',
+			\ 'x11 purple': '#a020f0',
+			\ 'x11purple': '#a020f0',
+			\ 'web purple': '#800080',
+			\ 'webpurple': '#800080',
+			\ 'medium purple': '#9370db',
+			\ 'mediumpurple': '#9370db',
+			\ 'thistle': '#d8bfd8',
+			\ 'snow1': '#fffafa',
+			\ 'snow2': '#eee9e9',
+			\ 'snow3': '#cdc9c9',
+			\ 'snow4': '#8b8989',
+			\ 'seashell1': '#fff5ee',
+			\ 'seashell2': '#eee5de',
+			\ 'seashell3': '#cdc5bf',
+			\ 'seashell4': '#8b8682',
+			\ 'antiquewhite1': '#ffefdb',
+			\ 'antiquewhite2': '#eedfcc',
+			\ 'antiquewhite3': '#cdc0b0',
+			\ 'antiquewhite4': '#8b8378',
+			\ 'bisque1': '#ffe4c4',
+			\ 'bisque2': '#eed5b7',
+			\ 'bisque3': '#cdb79e',
+			\ 'bisque4': '#8b7d6b',
+			\ 'peachpuff1': '#ffdab9',
+			\ 'peachpuff2': '#eecbad',
+			\ 'peachpuff3': '#cdaf95',
+			\ 'peachpuff4': '#8b7765',
+			\ 'navajowhite1': '#ffdead',
+			\ 'navajowhite2': '#eecfa1',
+			\ 'navajowhite3': '#cdb38b',
+			\ 'navajowhite4': '#8b795e',
+			\ 'lemonchiffon1': '#fffacd',
+			\ 'lemonchiffon2': '#eee9bf',
+			\ 'lemonchiffon3': '#cdc9a5',
+			\ 'lemonchiffon4': '#8b8970',
+			\ 'cornsilk1': '#fff8dc',
+			\ 'cornsilk2': '#eee8cd',
+			\ 'cornsilk3': '#cdc8b1',
+			\ 'cornsilk4': '#8b8878',
+			\ 'ivory1': '#fffff0',
+			\ 'ivory2': '#eeeee0',
+			\ 'ivory3': '#cdcdc1',
+			\ 'ivory4': '#8b8b83',
+			\ 'honeydew1': '#f0fff0',
+			\ 'honeydew2': '#e0eee0',
+			\ 'honeydew3': '#c1cdc1',
+			\ 'honeydew4': '#838b83',
+			\ 'lavenderblush1': '#fff0f5',
+			\ 'lavenderblush2': '#eee0e5',
+			\ 'lavenderblush3': '#cdc1c5',
+			\ 'lavenderblush4': '#8b8386',
+			\ 'mistyrose1': '#ffe4e1',
+			\ 'mistyrose2': '#eed5d2',
+			\ 'mistyrose3': '#cdb7b5',
+			\ 'mistyrose4': '#8b7d7b',
+			\ 'azure1': '#f0ffff',
+			\ 'azure2': '#e0eeee',
+			\ 'azure3': '#c1cdcd',
+			\ 'azure4': '#838b8b',
+			\ 'slateblue1': '#836fff',
+			\ 'slateblue2': '#7a67ee',
+			\ 'slateblue3': '#6959cd',
+			\ 'slateblue4': '#473c8b',
+			\ 'royalblue1': '#4876ff',
+			\ 'royalblue2': '#436eee',
+			\ 'royalblue3': '#3a5fcd',
+			\ 'royalblue4': '#27408b',
+			\ 'blue1': '#0000ff',
+			\ 'blue2': '#0000ee',
+			\ 'blue3': '#0000cd',
+			\ 'blue4': '#00008b',
+			\ 'dodgerblue1': '#1e90ff',
+			\ 'dodgerblue2': '#1c86ee',
+			\ 'dodgerblue3': '#1874cd',
+			\ 'dodgerblue4': '#104e8b',
+			\ 'steelblue1': '#63b8ff',
+			\ 'steelblue2': '#5cacee',
+			\ 'steelblue3': '#4f94cd',
+			\ 'steelblue4': '#36648b',
+			\ 'deepskyblue1': '#00bfff',
+			\ 'deepskyblue2': '#00b2ee',
+			\ 'deepskyblue3': '#009acd',
+			\ 'deepskyblue4': '#00688b',
+			\ 'skyblue1': '#87ceff',
+			\ 'skyblue2': '#7ec0ee',
+			\ 'skyblue3': '#6ca6cd',
+			\ 'skyblue4': '#4a708b',
+			\ 'lightskyblue1': '#b0e2ff',
+			\ 'lightskyblue2': '#a4d3ee',
+			\ 'lightskyblue3': '#8db6cd',
+			\ 'lightskyblue4': '#607b8b',
+			\ 'slategray1': '#c6e2ff',
+			\ 'slategray2': '#b9d3ee',
+			\ 'slategray3': '#9fb6cd',
+			\ 'slategray4': '#6c7b8b',
+			\ 'lightsteelblue1': '#cae1ff',
+			\ 'lightsteelblue2': '#bcd2ee',
+			\ 'lightsteelblue3': '#a2b5cd',
+			\ 'lightsteelblue4': '#6e7b8b',
+			\ 'lightblue1': '#bfefff',
+			\ 'lightblue2': '#b2dfee',
+			\ 'lightblue3': '#9ac0cd',
+			\ 'lightblue4': '#68838b',
+			\ 'lightcyan1': '#e0ffff',
+			\ 'lightcyan2': '#d1eeee',
+			\ 'lightcyan3': '#b4cdcd',
+			\ 'lightcyan4': '#7a8b8b',
+			\ 'paleturquoise1': '#bbffff',
+			\ 'paleturquoise2': '#aeeeee',
+			\ 'paleturquoise3': '#96cdcd',
+			\ 'paleturquoise4': '#668b8b',
+			\ 'cadetblue1': '#98f5ff',
+			\ 'cadetblue2': '#8ee5ee',
+			\ 'cadetblue3': '#7ac5cd',
+			\ 'cadetblue4': '#53868b',
+			\ 'turquoise1': '#00f5ff',
+			\ 'turquoise2': '#00e5ee',
+			\ 'turquoise3': '#00c5cd',
+			\ 'turquoise4': '#00868b',
+			\ 'cyan1': '#00ffff',
+			\ 'cyan2': '#00eeee',
+			\ 'cyan3': '#00cdcd',
+			\ 'cyan4': '#008b8b',
+			\ 'darkslategray1': '#97ffff',
+			\ 'darkslategray2': '#8deeee',
+			\ 'darkslategray3': '#79cdcd',
+			\ 'darkslategray4': '#528b8b',
+			\ 'aquamarine1': '#7fffd4',
+			\ 'aquamarine2': '#76eec6',
+			\ 'aquamarine3': '#66cdaa',
+			\ 'aquamarine4': '#458b74',
+			\ 'darkseagreen1': '#c1ffc1',
+			\ 'darkseagreen2': '#b4eeb4',
+			\ 'darkseagreen3': '#9bcd9b',
+			\ 'darkseagreen4': '#698b69',
+			\ 'seagreen1': '#54ff9f',
+			\ 'seagreen2': '#4eee94',
+			\ 'seagreen3': '#43cd80',
+			\ 'seagreen4': '#2e8b57',
+			\ 'palegreen1': '#9aff9a',
+			\ 'palegreen2': '#90ee90',
+			\ 'palegreen3': '#7ccd7c',
+			\ 'palegreen4': '#548b54',
+			\ 'springgreen1': '#00ff7f',
+			\ 'springgreen2': '#00ee76',
+			\ 'springgreen3': '#00cd66',
+			\ 'springgreen4': '#008b45',
+			\ 'green1': '#00ff00',
+			\ 'green2': '#00ee00',
+			\ 'green3': '#00cd00',
+			\ 'green4': '#008b00',
+			\ 'chartreuse1': '#7fff00',
+			\ 'chartreuse2': '#76ee00',
+			\ 'chartreuse3': '#66cd00',
+			\ 'chartreuse4': '#458b00',
+			\ 'olivedrab1': '#c0ff3e',
+			\ 'olivedrab2': '#b3ee3a',
+			\ 'olivedrab3': '#9acd32',
+			\ 'olivedrab4': '#698b22',
+			\ 'darkolivegreen1': '#caff70',
+			\ 'darkolivegreen2': '#bcee68',
+			\ 'darkolivegreen3': '#a2cd5a',
+			\ 'darkolivegreen4': '#6e8b3d',
+			\ 'khaki1': '#fff68f',
+			\ 'khaki2': '#eee685',
+			\ 'khaki3': '#cdc673',
+			\ 'khaki4': '#8b864e',
+			\ 'lightgoldenrod1': '#ffec8b',
+			\ 'lightgoldenrod2': '#eedc82',
+			\ 'lightgoldenrod3': '#cdbe70',
+			\ 'lightgoldenrod4': '#8b814c',
+			\ 'lightyellow1': '#ffffe0',
+			\ 'lightyellow2': '#eeeed1',
+			\ 'lightyellow3': '#cdcdb4',
+			\ 'lightyellow4': '#8b8b7a',
+			\ 'yellow1': '#ffff00',
+			\ 'yellow2': '#eeee00',
+			\ 'yellow3': '#cdcd00',
+			\ 'yellow4': '#8b8b00',
+			\ 'gold1': '#ffd700',
+			\ 'gold2': '#eec900',
+			\ 'gold3': '#cdad00',
+			\ 'gold4': '#8b7500',
+			\ 'goldenrod1': '#ffc125',
+			\ 'goldenrod2': '#eeb422',
+			\ 'goldenrod3': '#cd9b1d',
+			\ 'goldenrod4': '#8b6914',
+			\ 'darkgoldenrod1': '#ffb90f',
+			\ 'darkgoldenrod2': '#eead0e',
+			\ 'darkgoldenrod3': '#cd950c',
+			\ 'darkgoldenrod4': '#8b6508',
+			\ 'rosybrown1': '#ffc1c1',
+			\ 'rosybrown2': '#eeb4b4',
+			\ 'rosybrown3': '#cd9b9b',
+			\ 'rosybrown4': '#8b6969',
+			\ 'indianred1': '#ff6a6a',
+			\ 'indianred2': '#ee6363',
+			\ 'indianred3': '#cd5555',
+			\ 'indianred4': '#8b3a3a',
+			\ 'sienna1': '#ff8247',
+			\ 'sienna2': '#ee7942',
+			\ 'sienna3': '#cd6839',
+			\ 'sienna4': '#8b4726',
+			\ 'burlywood1': '#ffd39b',
+			\ 'burlywood2': '#eec591',
+			\ 'burlywood3': '#cdaa7d',
+			\ 'burlywood4': '#8b7355',
+			\ 'wheat1': '#ffe7ba',
+			\ 'wheat2': '#eed8ae',
+			\ 'wheat3': '#cdba96',
+			\ 'wheat4': '#8b7e66',
+			\ 'tan1': '#ffa54f',
+			\ 'tan2': '#ee9a49',
+			\ 'tan3': '#cd853f',
+			\ 'tan4': '#8b5a2b',
+			\ 'chocolate1': '#ff7f24',
+			\ 'chocolate2': '#ee7621',
+			\ 'chocolate3': '#cd661d',
+			\ 'chocolate4': '#8b4513',
+			\ 'firebrick1': '#ff3030',
+			\ 'firebrick2': '#ee2c2c',
+			\ 'firebrick3': '#cd2626',
+			\ 'firebrick4': '#8b1a1a',
+			\ 'brown1': '#ff4040',
+			\ 'brown2': '#ee3b3b',
+			\ 'brown3': '#cd3333',
+			\ 'brown4': '#8b2323',
+			\ 'salmon1': '#ff8c69',
+			\ 'salmon2': '#ee8262',
+			\ 'salmon3': '#cd7054',
+			\ 'salmon4': '#8b4c39',
+			\ 'lightsalmon1': '#ffa07a',
+			\ 'lightsalmon2': '#ee9572',
+			\ 'lightsalmon3': '#cd8162',
+			\ 'lightsalmon4': '#8b5742',
+			\ 'orange1': '#ffa500',
+			\ 'orange2': '#ee9a00',
+			\ 'orange3': '#cd8500',
+			\ 'orange4': '#8b5a00',
+			\ 'darkorange1': '#ff7f00',
+			\ 'darkorange2': '#ee7600',
+			\ 'darkorange3': '#cd6600',
+			\ 'darkorange4': '#8b4500',
+			\ 'coral1': '#ff7256',
+			\ 'coral2': '#ee6a50',
+			\ 'coral3': '#cd5b45',
+			\ 'coral4': '#8b3e2f',
+			\ 'tomato1': '#ff6347',
+			\ 'tomato2': '#ee5c42',
+			\ 'tomato3': '#cd4f39',
+			\ 'tomato4': '#8b3626',
+			\ 'orangered1': '#ff4500',
+			\ 'orangered2': '#ee4000',
+			\ 'orangered3': '#cd3700',
+			\ 'orangered4': '#8b2500',
+			\ 'red1': '#ff0000',
+			\ 'red2': '#ee0000',
+			\ 'red3': '#cd0000',
+			\ 'red4': '#8b0000',
+			\ 'deeppink1': '#ff1493',
+			\ 'deeppink2': '#ee1289',
+			\ 'deeppink3': '#cd1076',
+			\ 'deeppink4': '#8b0a50',
+			\ 'hotpink1': '#ff6eb4',
+			\ 'hotpink2': '#ee6aa7',
+			\ 'hotpink3': '#cd6090',
+			\ 'hotpink4': '#8b3a62',
+			\ 'pink1': '#ffb5c5',
+			\ 'pink2': '#eea9b8',
+			\ 'pink3': '#cd919e',
+			\ 'pink4': '#8b636c',
+			\ 'lightpink1': '#ffaeb9',
+			\ 'lightpink2': '#eea2ad',
+			\ 'lightpink3': '#cd8c95',
+			\ 'lightpink4': '#8b5f65',
+			\ 'palevioletred1': '#ff82ab',
+			\ 'palevioletred2': '#ee799f',
+			\ 'palevioletred3': '#cd6889',
+			\ 'palevioletred4': '#8b475d',
+			\ 'maroon1': '#ff34b3',
+			\ 'maroon2': '#ee30a7',
+			\ 'maroon3': '#cd2990',
+			\ 'maroon4': '#8b1c62',
+			\ 'violetred1': '#ff3e96',
+			\ 'violetred2': '#ee3a8c',
+			\ 'violetred3': '#cd3278',
+			\ 'violetred4': '#8b2252',
+			\ 'magenta1': '#ff00ff',
+			\ 'magenta2': '#ee00ee',
+			\ 'magenta3': '#cd00cd',
+			\ 'magenta4': '#8b008b',
+			\ 'orchid1': '#ff83fa',
+			\ 'orchid2': '#ee7ae9',
+			\ 'orchid3': '#cd69c9',
+			\ 'orchid4': '#8b4789',
+			\ 'plum1': '#ffbbff',
+			\ 'plum2': '#eeaeee',
+			\ 'plum3': '#cd96cd',
+			\ 'plum4': '#8b668b',
+			\ 'mediumorchid1': '#e066ff',
+			\ 'mediumorchid2': '#d15fee',
+			\ 'mediumorchid3': '#b452cd',
+			\ 'mediumorchid4': '#7a378b',
+			\ 'darkorchid1': '#bf3eff',
+			\ 'darkorchid2': '#b23aee',
+			\ 'darkorchid3': '#9a32cd',
+			\ 'darkorchid4': '#68228b',
+			\ 'purple1': '#9b30ff',
+			\ 'purple2': '#912cee',
+			\ 'purple3': '#7d26cd',
+			\ 'purple4': '#551a8b',
+			\ 'mediumpurple1': '#ab82ff',
+			\ 'mediumpurple2': '#9f79ee',
+			\ 'mediumpurple3': '#8968cd',
+			\ 'mediumpurple4': '#5d478b',
+			\ 'thistle1': '#ffe1ff',
+			\ 'thistle2': '#eed2ee',
+			\ 'thistle3': '#cdb5cd',
+			\ 'thistle4': '#8b7b8b',
+			\ 'gray0': '#000000',
+			\ 'grey0': '#000000',
+			\ 'gray1': '#030303',
+			\ 'grey1': '#030303',
+			\ 'gray2': '#050505',
+			\ 'grey2': '#050505',
+			\ 'gray3': '#080808',
+			\ 'grey3': '#080808',
+			\ 'gray4': '#0a0a0a',
+			\ 'grey4': '#0a0a0a',
+			\ 'gray5': '#0d0d0d',
+			\ 'grey5': '#0d0d0d',
+			\ 'gray6': '#0f0f0f',
+			\ 'grey6': '#0f0f0f',
+			\ 'gray7': '#121212',
+			\ 'grey7': '#121212',
+			\ 'gray8': '#141414',
+			\ 'grey8': '#141414',
+			\ 'gray9': '#171717',
+			\ 'grey9': '#171717',
+			\ 'gray10': '#1a1a1a',
+			\ 'grey10': '#1a1a1a',
+			\ 'gray11': '#1c1c1c',
+			\ 'grey11': '#1c1c1c',
+			\ 'gray12': '#1f1f1f',
+			\ 'grey12': '#1f1f1f',
+			\ 'gray13': '#212121',
+			\ 'grey13': '#212121',
+			\ 'gray14': '#242424',
+			\ 'grey14': '#242424',
+			\ 'gray15': '#262626',
+			\ 'grey15': '#262626',
+			\ 'gray16': '#292929',
+			\ 'grey16': '#292929',
+			\ 'gray17': '#2b2b2b',
+			\ 'grey17': '#2b2b2b',
+			\ 'gray18': '#2e2e2e',
+			\ 'grey18': '#2e2e2e',
+			\ 'gray19': '#303030',
+			\ 'grey19': '#303030',
+			\ 'gray20': '#333333',
+			\ 'grey20': '#333333',
+			\ 'gray21': '#363636',
+			\ 'grey21': '#363636',
+			\ 'gray22': '#383838',
+			\ 'grey22': '#383838',
+			\ 'gray23': '#3b3b3b',
+			\ 'grey23': '#3b3b3b',
+			\ 'gray24': '#3d3d3d',
+			\ 'grey24': '#3d3d3d',
+			\ 'gray25': '#404040',
+			\ 'grey25': '#404040',
+			\ 'gray26': '#424242',
+			\ 'grey26': '#424242',
+			\ 'gray27': '#454545',
+			\ 'grey27': '#454545',
+			\ 'gray28': '#474747',
+			\ 'grey28': '#474747',
+			\ 'gray29': '#4a4a4a',
+			\ 'grey29': '#4a4a4a',
+			\ 'gray30': '#4d4d4d',
+			\ 'grey30': '#4d4d4d',
+			\ 'gray31': '#4f4f4f',
+			\ 'grey31': '#4f4f4f',
+			\ 'gray32': '#525252',
+			\ 'grey32': '#525252',
+			\ 'gray33': '#545454',
+			\ 'grey33': '#545454',
+			\ 'gray34': '#575757',
+			\ 'grey34': '#575757',
+			\ 'gray35': '#595959',
+			\ 'grey35': '#595959',
+			\ 'gray36': '#5c5c5c',
+			\ 'grey36': '#5c5c5c',
+			\ 'gray37': '#5e5e5e',
+			\ 'grey37': '#5e5e5e',
+			\ 'gray38': '#616161',
+			\ 'grey38': '#616161',
+			\ 'gray39': '#636363',
+			\ 'grey39': '#636363',
+			\ 'gray40': '#666666',
+			\ 'grey40': '#666666',
+			\ 'gray41': '#696969',
+			\ 'grey41': '#696969',
+			\ 'gray42': '#6b6b6b',
+			\ 'grey42': '#6b6b6b',
+			\ 'gray43': '#6e6e6e',
+			\ 'grey43': '#6e6e6e',
+			\ 'gray44': '#707070',
+			\ 'grey44': '#707070',
+			\ 'gray45': '#737373',
+			\ 'grey45': '#737373',
+			\ 'gray46': '#757575',
+			\ 'grey46': '#757575',
+			\ 'gray47': '#787878',
+			\ 'grey47': '#787878',
+			\ 'gray48': '#7a7a7a',
+			\ 'grey48': '#7a7a7a',
+			\ 'gray49': '#7d7d7d',
+			\ 'grey49': '#7d7d7d',
+			\ 'gray50': '#7f7f7f',
+			\ 'grey50': '#7f7f7f',
+			\ 'gray51': '#828282',
+			\ 'grey51': '#828282',
+			\ 'gray52': '#858585',
+			\ 'grey52': '#858585',
+			\ 'gray53': '#878787',
+			\ 'grey53': '#878787',
+			\ 'gray54': '#8a8a8a',
+			\ 'grey54': '#8a8a8a',
+			\ 'gray55': '#8c8c8c',
+			\ 'grey55': '#8c8c8c',
+			\ 'gray56': '#8f8f8f',
+			\ 'grey56': '#8f8f8f',
+			\ 'gray57': '#919191',
+			\ 'grey57': '#919191',
+			\ 'gray58': '#949494',
+			\ 'grey58': '#949494',
+			\ 'gray59': '#969696',
+			\ 'grey59': '#969696',
+			\ 'gray60': '#999999',
+			\ 'grey60': '#999999',
+			\ 'gray61': '#9c9c9c',
+			\ 'grey61': '#9c9c9c',
+			\ 'gray62': '#9e9e9e',
+			\ 'grey62': '#9e9e9e',
+			\ 'gray63': '#a1a1a1',
+			\ 'grey63': '#a1a1a1',
+			\ 'gray64': '#a3a3a3',
+			\ 'grey64': '#a3a3a3',
+			\ 'gray65': '#a6a6a6',
+			\ 'grey65': '#a6a6a6',
+			\ 'gray66': '#a8a8a8',
+			\ 'grey66': '#a8a8a8',
+			\ 'gray67': '#ababab',
+			\ 'grey67': '#ababab',
+			\ 'gray68': '#adadad',
+			\ 'grey68': '#adadad',
+			\ 'gray69': '#b0b0b0',
+			\ 'grey69': '#b0b0b0',
+			\ 'gray70': '#b3b3b3',
+			\ 'grey70': '#b3b3b3',
+			\ 'gray71': '#b5b5b5',
+			\ 'grey71': '#b5b5b5',
+			\ 'gray72': '#b8b8b8',
+			\ 'grey72': '#b8b8b8',
+			\ 'gray73': '#bababa',
+			\ 'grey73': '#bababa',
+			\ 'gray74': '#bdbdbd',
+			\ 'grey74': '#bdbdbd',
+			\ 'gray75': '#bfbfbf',
+			\ 'grey75': '#bfbfbf',
+			\ 'gray76': '#c2c2c2',
+			\ 'grey76': '#c2c2c2',
+			\ 'gray77': '#c4c4c4',
+			\ 'grey77': '#c4c4c4',
+			\ 'gray78': '#c7c7c7',
+			\ 'grey78': '#c7c7c7',
+			\ 'gray79': '#c9c9c9',
+			\ 'grey79': '#c9c9c9',
+			\ 'gray80': '#cccccc',
+			\ 'grey80': '#cccccc',
+			\ 'gray81': '#cfcfcf',
+			\ 'grey81': '#cfcfcf',
+			\ 'gray82': '#d1d1d1',
+			\ 'grey82': '#d1d1d1',
+			\ 'gray83': '#d4d4d4',
+			\ 'grey83': '#d4d4d4',
+			\ 'gray84': '#d6d6d6',
+			\ 'grey84': '#d6d6d6',
+			\ 'gray85': '#d9d9d9',
+			\ 'grey85': '#d9d9d9',
+			\ 'gray86': '#dbdbdb',
+			\ 'grey86': '#dbdbdb',
+			\ 'gray87': '#dedede',
+			\ 'grey87': '#dedede',
+			\ 'gray88': '#e0e0e0',
+			\ 'grey88': '#e0e0e0',
+			\ 'gray89': '#e3e3e3',
+			\ 'grey89': '#e3e3e3',
+			\ 'gray90': '#e5e5e5',
+			\ 'grey90': '#e5e5e5',
+			\ 'gray91': '#e8e8e8',
+			\ 'grey91': '#e8e8e8',
+			\ 'gray92': '#ebebeb',
+			\ 'grey92': '#ebebeb',
+			\ 'gray93': '#ededed',
+			\ 'grey93': '#ededed',
+			\ 'gray94': '#f0f0f0',
+			\ 'grey94': '#f0f0f0',
+			\ 'gray95': '#f2f2f2',
+			\ 'grey95': '#f2f2f2',
+			\ 'gray96': '#f5f5f5',
+			\ 'grey96': '#f5f5f5',
+			\ 'gray97': '#f7f7f7',
+			\ 'grey97': '#f7f7f7',
+			\ 'gray98': '#fafafa',
+			\ 'grey98': '#fafafa',
+			\ 'gray99': '#fcfcfc',
+			\ 'grey99': '#fcfcfc',
+			\ 'gray100': '#ffffff',
+			\ 'grey100': '#ffffff',
+			\ 'dark grey': '#a9a9a9',
+			\ 'darkgrey': '#a9a9a9',
+			\ 'dark gray': '#a9a9a9',
+			\ 'darkgray': '#a9a9a9',
+			\ 'dark blue': '#00008b',
+			\ 'darkblue': '#00008b',
+			\ 'dark cyan': '#008b8b',
+			\ 'darkcyan': '#008b8b',
+			\ 'dark magenta': '#8b008b',
+			\ 'darkmagenta': '#8b008b',
+			\ 'dark red': '#8b0000',
+			\ 'darkred': '#8b0000',
+			\ 'light green': '#90ee90',
+			\ 'lightgreen': '#90ee90',
+			\ 'crimson': '#dc143c',
+			\ 'indigo': '#4b0082',
+			\ 'olive': '#808000',
+			\ 'rebecca purple': '#663399',
+			\ 'rebeccapurple': '#663399',
+			\ 'silver': '#c0c0c0',
+			\ 'teal': '#008080'
+			\ }, 'keep')
+
+let &cpo= s:keepcpo
+unlet s:keepcpo
+
+"vim: sw=4

runtime/doc/autocmd.txt

@@ -1,4 +1,4 @@
-*autocmd.txt*   For Vim version 8.2.  Last change: 2021 Aug 01
+*autocmd.txt*   For Vim version 8.2.  Last change: 2021 Oct 04
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -708,7 +708,7 @@ EncodingChanged			Fires off after the 'encoding' option has been
 							*FileAppendCmd*
 FileAppendCmd			Before appending to a file.  Should do the
 				appending to the file.  Use the '[ and ']
-				marks for the range of lines.|Cmd-event|
+				marks for the range of lines. |Cmd-event|
 							*FileAppendPost*
 FileAppendPost			After appending to a file.
 							*FileAppendPre*
@@ -836,7 +836,7 @@ FilterReadPre			Before reading a file from a filter command.
 							*FilterWritePost*
 FilterWritePost			After writing a file for a filter command or
 				making a diff with an external diff (see
-				DiffUpdated for internal diff).
+				|DiffUpdated| for internal diff).
 				Vim checks the pattern against the name of
 				the current buffer as with FilterWritePre.
 				Not triggered when 'shelltemp' is off.
@@ -930,18 +930,23 @@ MenuPopup			Just before showing the popup menu (under the
 							*ModeChanged*
 ModeChanged			After changing the mode. The pattern is
 				matched against `'old_mode:new_mode'`, for
-				example match against `i:*` to simulate
-				|InsertLeave|.
+				example match against `*:c*` to simulate
+				|CmdlineEnter|.
 				The following values of |v:event| are set:
 				   old_mode	The mode before it changed.
 				   new_mode	The new mode as also returned
-						by |mode()|.
+						by |mode()| called with a
+						non-zero argument.
 				When ModeChanged is triggered, old_mode will
 				have the value of new_mode when the event was
 				last triggered.
+				This will be triggered on every minor mode
+				change.
 				Usage example to use relative line numbers
-				when entering visual mode: >
-	:autocmd ModeChanged *:v set relativenumber
+				when entering Visual mode: >
+	:au ModeChanged [vV\x16]*:* let &l:rnu = mode() =~# '^[vV\x16]'
+	:au ModeChanged *:[vV\x16]* let &l:rnu = mode() =~# '^[vV\x16]'
+	:au WinEnter,WinLeave * let &l:rnu = mode() =~# '^[vV\x16]'
 <							*OptionSet*
 OptionSet			After setting an option.  The pattern is
 				matched against the long option name.
@@ -1195,9 +1200,9 @@ TextYankPost			After text has been yanked or deleted in the
 						register, as a list of lines,
 						like with: >
 						getreg(r, 1, 1)
-<				   regname	Name of the |register| or
-						empty string for the unnamed
-						register.
+<				   regname	Name of the register or empty
+						string for the unnamed
+						register, see |registers|.
 				   regtype	Type of the register, see
 						|getregtype()|.
 				   visual	True if the operation is
@@ -1502,6 +1507,13 @@ Example: >
 This prevents having the autocommands defined twice (e.g., after sourcing the
 .vimrc file again).
 
+						*FileExplorer*
+There is one group that is recognized by Vim: FileExplorer.  If this group
+exists Vim assumes that editing a directory is possible and will trigger a
+plugin that lists the files in that directory.  This is used by the |netrw|
+plugin.  This allows you to do: >
+	browse edit
+
 ==============================================================================
 9. Executing autocommands				*autocmd-execute*
 

runtime/doc/change.txt

@@ -1184,9 +1184,6 @@ a register, a paste on a visual selected area will paste that single line on
 each of the selected lines (thus replacing the blockwise selected region by a
 block of the pasted line).
 
-Use |zP|/|zp| to paste a blockwise yanked register without appending trailing
-spaces.
-
 							*blockwise-register*
 If you use a blockwise Visual mode command to get the text into the register,
 the block of text will be inserted before ("P") or after ("p") the cursor
@@ -1197,6 +1194,9 @@ this happen.  However, if the width of the block is not a multiple of a <Tab>
 width and the text after the inserted block contains <Tab>s, that text may be
 misaligned.
 
+Use |zP|/|zp| to paste a blockwise yanked register without appending trailing
+spaces.
+
 Note that after a characterwise yank command, Vim leaves the cursor on the
 first yanked character that is closest to the start of the buffer.  This means
 that "yl" doesn't move the cursor, but "yh" moves the cursor one character

runtime/doc/cmdline.txt

@@ -803,7 +803,7 @@ three lines: >
 		3:d<CR>		is translated into: .,.+2d<CR>
 <
 
-Visual Mode and Range					
+Visual Mode and Range
 							*v_:*
 {Visual}:	Starts a command-line with the Visual selected lines as a
 		range.  The code `:'<,'>` is used for this range, which makes

runtime/doc/digraph.txt

@@ -351,8 +351,8 @@ $	DO	0x24	 36	DOLLAR SIGN
 þ	th	0xfe	254	LATIN SMALL LETTER THORN (Icelandic)
 ÿ	y:	0xff	255	LATIN SMALL LETTER Y WITH DIAERESIS
 
-If your Vim is compiled with |multibyte| support and you are using a multibyte
-'encoding', Vim provides this enhanced set of additional digraphs:
+If you are using a |multibyte| 'encoding', Vim provides this enhanced set of
+additional digraphs:
 
 							*digraph-table-mbyte*
 char  digraph	hex	dec	official name ~

runtime/doc/editing.txt

@@ -1,4 +1,4 @@
-*editing.txt*   For Vim version 8.2.  Last change: 2021 Jul 25
+*editing.txt*   For Vim version 8.2.  Last change: 2021 Oct 16
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1225,7 +1225,9 @@ If you want to always use ":confirm", set the 'confirm' option.
 			|:diffsplit|, |:diffpatch|, |:open|, |:pedit|,
 			|:redir|, |:source|, |:update|, |:visual|, |:vsplit|,
 			and |:qall| if 'confirm' is set.
-			{only in Win32, Athena, Motif, GTK and Mac GUI}
+			{only in Win32, Athena, Motif, GTK and Mac GUI, in
+			console `browse edit` works if the FileExplorer
+			autocommand group exists}
 			When ":browse" is not possible you get an error
 			message.  If the |+browse| feature is missing or the
 			{command} doesn't support browsing, the {command} is
@@ -1327,26 +1329,26 @@ present in 'cpoptions' and "!" is not used in the command.
 			other tabs and for windows in the current tab that
 			have their own window-local directory.
 
-							*:tch* *:tchdir*
-:tch[dir][!]		Same as |:tcd|.
-
 							*:tcd-*
 :tc[d][!] -		Change to the previous current directory, before the
 			last ":tcd {path}" command.
 
+							*:tch* *:tchdir*
+:tch[dir][!]		Same as |:tcd|.
+
 							*:lc* *:lcd*
 :lc[d][!] {path}	Like |:cd|, but only set the current directory when
 			the cursor is in the current window.  The current
 			directory for other windows is not changed, switching
 			to another window will stop using {path}.
 
-							*:lch* *:lchdir*
-:lch[dir][!]		Same as |:lcd|.
-
 							*:lcd-*
 :lcd[!] -		Change to the previous current directory, before the
 			last ":lcd {path}" command.
 
+							*:lch* *:lchdir*
+:lch[dir][!]		Same as |:lcd|.
+
 							*:pw* *:pwd* *E187*
 :pw[d]			Print the current directory name.
 			Also see |getcwd()|.
@@ -1373,14 +1375,14 @@ change anything for the current directory.
 When a |:lcd| command has been used for a window, the specified directory
 becomes the current directory for that window.  Windows where the |:lcd|
 command has not been used stick to the global or tab-local current directory.
-When jumping to another window the current directory will become the last
+When jumping to another window the current directory is changed to the last
 specified local current directory.  If none was specified, the global or
 tab-local current directory is used.
 
 When a |:tcd| command has been used for a tab page, the specified directory
 becomes the current directory for the current tab page and the current window.
 The current directory of other tab pages is not affected.  When jumping to
-another tab page, the current directory will become the last specified local
+another tab page, the current directory is changed to the last specified local
 directory for that tab page. If the current tab has no local current directory
 the global current directory is used.
 
@@ -1674,6 +1676,11 @@ It is also possible that you modified the file yourself, from another edit
 session or with another command (e.g., a filter command).  Then you will know
 which version of the file you want to keep.
 
+The accuracy of the time check depends on the filesystem.  On Unix it is
+usually sub-second.  With old file sytems and on MS-Windows it is normally one
+second.  Use has('nanotime') check if sub-second time stamp checks are
+available.
+
 There is one situation where you get the message while there is nothing wrong:
 On a Win32 system on the day daylight saving time starts.  There is something
 in the Win32 libraries that confuses Vim about the hour time difference.  The

runtime/doc/eval.txt

@@ -1,4 +1,4 @@
-*eval.txt*	For Vim version 8.2.  Last change: 2021 Sep 08
+*eval.txt*	For Vim version 8.2.  Last change: 2021 Oct 20
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -658,7 +658,7 @@ It is not necessary to use the "dict" attribute for a numbered function.
 
 If you get an error for a numbered function, you can find out what it is with
 a trick.  Assuming the function is 42, the command is: >
-	:function {42}
+	:function g:42
 
 
 Functions for Dictionaries ~
@@ -1417,7 +1417,7 @@ A string constant accepts these special characters:
 \U....	same as \u but allows up to 8 hex numbers.
 \b	backspace <BS>
 \e	escape <Esc>
-\f	formfeed <FF>
+\f	formfeed 0x0C
 \n	newline <NL>
 \r	return <CR>
 \t	tab <Tab>
@@ -1426,7 +1426,7 @@ A string constant accepts these special characters:
 \<xxx>	Special key named "xxx".  e.g. "\<C-W>" for CTRL-W.  This is for use
 	in mappings, the 0x80 byte is escaped.
 	To use the double quote character it must be escaped: "<M-\">".
-	Don't use <Char-xxxx> to get a utf-8 character, use \uxxxx as
+	Don't use <Char-xxxx> to get a UTF-8 character, use \uxxxx as
 	mentioned above.
 \<*xxx>	Like \<xxx> but prepends a modifier instead of including it in the
 	character.  E.g. "\<C-w>" is one character 0x17 while "\<*C-w>" is four
@@ -1840,6 +1840,43 @@ v:collate	The current locale setting for collation order of the runtime
 		command.
 		See |multi-lang|.
 
+                                                                *v:colornames*
+v:colornames    A dictionary that maps color names to hex color strings. These
+		color names can be used with the |highlight-guifg|,
+		|highlight-guibg|, and |highlight-guisp| parameters. Updating
+		an entry in v:colornames has no immediate effect on the syntax
+		highlighting. The highlight commands (probably in a
+		colorscheme script) need to be re-evaluated in order to use
+		the updated color values. For example: >
+
+		    :let v:colornames['fuscia'] = '#cf3ab4'
+		    :let v:colornames['mauve'] = '#915f6d'
+		    :highlight Normal guifg=fuscia guibg=mauve
+<
+		This cannot be used to override the |cterm-colors| but it can
+		be used to override other colors. For example, the X11 colors
+		defined in the `colors/lists/default.vim` (previously defined
+		in |rgb.txt|). When defining new color names in a plugin, the
+		recommended practice is to set a color entry only when it does
+		not already exist. For example: >
+
+		    :call extend(v:colornames, {
+			\ 'fuscia': '#cf3ab4',
+			\ 'mauve': '#915f6d,
+			\ }, 'keep')
+<
+		Using |extend| with the 'keep' option updates each color only
+		if it did not exist in |v:colornames|. Doing so allows the
+		user to choose the precise color value for a common name
+		by setting it in their |.vimrc|.
+
+		It is possible to remove entries from this dictionary but
+		doing so is *NOT* recommended. Doing so is disruptive to
+		other scripts. It is also unlikely to achieve the desired
+		result because the |colorscheme| and |highlight| commands will
+		both automatically load all `colors/lists/default.vim` color
+		scripts.
+
 				*v:completed_item* *completed_item-variable*
 v:completed_item
 		|Dictionary| containing the |complete-items| for the most
@@ -2516,7 +2553,7 @@ ch_setoptions({handle}, {options})
 ch_status({handle} [, {options}])
 				String	status of channel {handle}
 changenr()			Number	current change number
-char2nr({expr} [, {utf8}])	Number	ASCII/UTF8 value of first char in {expr}
+char2nr({expr} [, {utf8}])	Number	ASCII/UTF-8 value of first char in {expr}
 charclass({string})		Number	character class of {string}
 charcol({expr})			Number	column number of cursor or mark
 charidx({string}, {idx} [, {countcc}])
@@ -2549,7 +2586,7 @@ deletebufline({buf}, {first} [, {last}])
 did_filetype()			Number	|TRUE| if FileType autocmd event used
 diff_filler({lnum})		Number	diff filler lines about {lnum}
 diff_hlID({lnum}, {col})	Number	diff highlighting at {lnum}/{col}
-digraph_get({chars})		String	get the digraph of {chars}
+digraph_get({chars})		String	get the |digraph| of {chars}
 digraph_getlist([{listall}])	List	get all |digraph|s
 digraph_set({chars}, {digraph})	Boolean	register |digraph|
 digraph_setlist({digraphlist})	Boolean	register multiple |digraph|s
@@ -2681,6 +2718,8 @@ histget({history} [, {index}])	String	get the item {index} from a history
 histnr({history})		Number	highest index of a history
 hlID({name})			Number	syntax ID of highlight group {name}
 hlexists({name})		Number	|TRUE| if highlight group {name} exists
+hlget([{name} [, {resolve}]])	List	get highlight group attributes
+hlset({list})			Number	set highlight group attributes
 hostname()			String	name of the machine Vim is running on
 iconv({expr}, {from}, {to})	String	convert encoding of {expr}
 indent({lnum})			Number	indent of line {lnum}
@@ -2769,7 +2808,7 @@ mkdir({name} [, {path} [, {prot}]])
 mode([expr])			String	current editing mode
 mzeval({expr})			any	evaluate |MzScheme| expression
 nextnonblank({lnum})		Number	line nr of non-blank line >= {lnum}
-nr2char({expr} [, {utf8}])	String	single char with ASCII/UTF8 value {expr}
+nr2char({expr} [, {utf8}])	String	single char with ASCII/UTF-8 value {expr}
 or({expr}, {expr})		Number	bitwise OR
 pathshorten({expr} [, {len}])	String	shorten directory names in a path
 perleval({expr})		any	evaluate |Perl| expression
@@ -2787,7 +2826,7 @@ popup_getoptions({id})		Dict	get options of popup window {id}
 popup_getpos({id})		Dict	get position of popup window {id}
 popup_hide({id})		none	hide popup menu {id}
 popup_list()			List	get a list of window IDs of all popups
-popup_locate({row}, {col})	Number 	get window ID of popup at position
+popup_locate({row}, {col})	Number	get window ID of popup at position
 popup_menu({what}, {options})	Number	create a popup window used as a menu
 popup_move({id}, {options})	none	set position of popup window {id}
 popup_notification({what}, {options})
@@ -2899,7 +2938,7 @@ setenv({name}, {val})		none	set environment variable
 setfperm({fname}, {mode})	Number	set {fname} file permissions to {mode}
 setline({lnum}, {line})		Number	set line {lnum} to {line}
 setloclist({nr}, {list} [, {action}])
- 				Number	modify location list using {list}
+				Number	modify location list using {list}
 setloclist({nr}, {list}, {action}, {what})
 				Number	modify specific location list props
 setmatches({list} [, {win}])	Number	restore a list of matches
@@ -2959,7 +2998,7 @@ srand([{expr}])			List	get seed for |rand()|
 state([{what}])			String	current state of Vim
 str2float({expr} [, {quoted}])	Float	convert String to Float
 str2list({expr} [, {utf8}])	List	convert each character of {expr} to
-					ASCII/UTF8 value
+					ASCII/UTF-8 value
 str2nr({expr} [, {base} [, {quoted}]])
 				Number	convert String to Number
 strcharlen({expr})		Number	character length of the String {expr}
@@ -3656,7 +3695,7 @@ char2nr({string} [, {utf8}])					*char2nr()*
 		Example for "utf-8": >
 			char2nr("á")		returns 225
 			char2nr("á"[0])		returns 195
-<		With {utf8} set to TRUE, always treat as utf-8 characters.
+<		When {utf8} is TRUE, always treat as UTF-8 characters.
 		A combining character is a separate character.
 		|nr2char()| does the opposite.
 		To turn a string into a list of character numbers: >
@@ -3883,6 +3922,8 @@ complete_info([{what}])				*complete_info()*
 		   ""		     Not in completion mode
 		   "keyword"	     Keyword completion |i_CTRL-X_CTRL-N|
 		   "ctrl_x"	     Just pressed CTRL-X |i_CTRL-X|
+		   "scroll"	     Scrolling with |i_CTRL-X_CTRL-E| or
+				     |i_CTRL-X_CTRL-Y|
 		   "whole_line"	     Whole lines |i_CTRL-X_CTRL-L|
 		   "files"	     File names |i_CTRL-X_CTRL-F|
 		   "tags"	     Tags |i_CTRL-X_CTRL-]|
@@ -4281,7 +4322,7 @@ digraph_getlist([{listall}])				*digraph_getlist()*
 
 digraph_set({chars}, {digraph})				*digraph_set()* *E1205*
 		Add digraph {chars} to the list.  {chars} must be a string
-		with two characters.  {digraph} is a string with one utf-8
+		with two characters.  {digraph} is a string with one UTF-8
 		encoded character. Be careful, composing characters are NOT
 		ignored.  This function is similar to |:digraphs| command, but
 		useful to add digraphs start with a white space.
@@ -6140,6 +6181,7 @@ getreg([{regname} [, 1 [, {list}]]])			*getreg()*
 		(see |NL-used-for-Nul|).
 		When the register was not set an empty list is returned.
 
+		If {regname} is "", the unnamed register '"' is used.
 		If {regname} is not specified, |v:register| is used.
 		In |Vim9-script| {regname} must be one character.
 
@@ -6167,6 +6209,7 @@ getreginfo([{regname}])					*getreginfo()*
 
 		The {regname} argument is a string.  If {regname} is invalid
 		or not set, an empty Dictionary will be returned.
+		If {regname} is "" or "@", the unnamed register '"' is used.
 		If {regname} is not specified, |v:register| is used.
 		The returned Dictionary can be passed to |setreg()|.
 		In |Vim9-script| {regname} must be one character.
@@ -6182,8 +6225,9 @@ getregtype([{regname}])					*getregtype()*
 		    "<CTRL-V>{width}"	for |blockwise-visual| text
 		    ""			for an empty or unknown register
 		<CTRL-V> is one character with value 0x16.
-		The {regname} argument is a string.  If {regname} is not
-		specified, |v:register| is used.
+		The {regname} argument is a string.  If {regname} is "", the
+		unnamed register '"' is used.  If {regname} is not specified,
+		|v:register| is used.
 		In |Vim9-script| {regname} must be one character.
 
 		Can also be used as a |method|: >
@@ -6674,6 +6718,93 @@ hlexists({name})					*hlexists()*
 
 		Can also be used as a |method|: >
 			GetName()->hlexists()
+<
+hlget([{name} [, {resolve}]])				*hlget()*
+		Returns a List of all the highlight group attributes.  If the
+		optional {name} is specified, then returns a List with only
+		the attributes of the specified highlight group.  Returns an
+		empty List if the highlight group {name} is not present.
+
+		If the optional {resolve} argument is set to v:true and the
+		highlight group {name} is linked to another group, then the
+		link is resolved recursively and the attributes of the
+		resolved highlight group are returned.
+
+		Each entry in the returned List is a Dictionary with the
+		following items:
+			cleared	Boolean flag, set to v:true if the highlight
+				group attributes are cleared or not yet
+				specified.  See |highlight-clear|.
+			cterm	cterm attributes. See |highlight-cterm|.
+			ctermbg	cterm background color.
+				See |highlight-ctermbg|.
+			ctermfg	cterm foreground color.
+				See |highlight-ctermfg|.
+			ctermul	cterm underline color.  See |highlight-ctermul|.
+			font	highlight group font.  See |highlight-font|.
+			gui	gui attributes. See |highlight-gui|.
+			guibg	gui background color.  See |highlight-guibg|.
+			guifg	gui foreground color.  See |highlight-guifg|.
+			guisp	gui special color.  See |highlight-guisp|.
+			id	highlight group ID.
+			linksto	linked highlight group name.
+				See |:highlight-link|.
+			name	highlight group name. See |group-name|.
+			start	start terminal keycode.  See |highlight-start|.
+			stop	stop terminal keycode.  See |highlight-stop|.
+			term	term attributes.  See |highlight-term|.
+
+		The 'term', 'cterm' and 'gui' items in the above Dictionary
+		have a dictionary value with the following optional boolean
+		items: 'bold', 'standout', 'underline', 'undercurl', 'italic',
+		'reverse', 'inverse' and 'strikethrough'.
+
+		Example(s): >
+			:echo hlget()
+			:echo hlget('ModeMsg')
+			:echo hlget('Number', v:true)
+<
+		Can also be used as a |method|: >
+			GetName()->hlget()
+<
+hlset({list})						*hlset()*
+		Creates or modifies the attributes of a List of highlight
+		groups.  Each item in {list} is a dictionary containing the
+		attributes of a highlight group. See |hlget()| for the list of
+		supported items in this dictionary.
+
+		The highlight group is identified using the 'name' item and
+		the 'id' item (if supplied) is ignored.  If a highlight group
+		with a specified name doesn't exist, then it is created.
+		Otherwise the attributes of an existing highlight group are
+		modified.
+
+		If an empty dictionary value is used for the 'term' or 'cterm'
+		or 'gui' entries, then the corresponding attributes are
+		cleared.  If the 'cleared' item is set to v:true, then all the
+		attributes of the highlight group are cleared.
+
+		The 'linksto' item can be used to link a highlight group to
+		another highlight group.  See |:highlight-link|.
+
+		Returns zero for success, -1 for failure.
+
+		Example(s): >
+			" add bold attribute to the Visual highlight group
+			:call hlset([#{name: 'Visual',
+					\ term: #{reverse: 1 , bold: 1}}])
+			:call hlset([#{name: 'Type', guifg: 'DarkGreen'}])
+			:let l = hlget()
+			:call hlset(l)
+			" clear the Search highlight group
+			:call hlset([#{name: 'Search', cleared: v:true}])
+			" clear the 'term' attributes for a highlight group
+			:call hlset([#{name: 'Title', term: {}}])
+			" create the MyHlg group linking it to DiffAdd
+			:call hlset([#{name: 'MyHlg', linksto: 'DiffAdd'}])
+<
+		Can also be used as a |method|: >
+			GetAttrList()->hlset()
 <
 							*hlID()*
 hlID({name})	The result is a Number, which is the ID of the highlight group
@@ -7244,8 +7375,8 @@ list2str({list} [, {utf8}])				*list2str()*
 <		|str2list()| does the opposite.
 
 		When {utf8} is omitted or zero, the current 'encoding' is used.
-		With {utf8} is 1, always return utf-8 characters.
-		With utf-8 composing characters work as expected: >
+		When {utf8} is TRUE, always return UTF-8 characters.
+		With UTF-8 composing characters work as expected: >
 			list2str([97, 769])	returns "á"
 <
 		Can also be used as a |method|: >
@@ -7487,7 +7618,7 @@ maparg({name} [, {mode} [, {abbr} [, {dict}]]])			*maparg()*
 		  "lhs"	     The {lhs} of the mapping as it would be typed
 		  "lhsraw"   The {lhs} of the mapping as raw bytes
 		  "lhsrawalt" The {lhs} of the mapping as raw bytes, alternate
-		  	      form, only present when it differs from "lhsraw"
+			      form, only present when it differs from "lhsraw"
 		  "rhs"	     The {rhs} of the mapping as typed.
 		  "silent"   1 for a |:map-silent| mapping, else 0.
 		  "noremap"  1 if the {rhs} of the mapping is not remappable.
@@ -7935,7 +8066,8 @@ max({expr})	Return the maximum value of all items in {expr}. Example: >
 menu_info({name} [, {mode}])				*menu_info()*
 		Return information about the specified menu {name} in
 		mode {mode}. The menu name should be specified without the
-		shortcut character ('&').
+		shortcut character ('&'). If {name} is "", then the top-level
+		menu names are returned.
 
 		{mode} can be one of these strings:
 			"n"	Normal
@@ -7986,6 +8118,20 @@ menu_info({name} [, {mode}])				*menu_info()*
 		Examples: >
 			:echo menu_info('Edit.Cut')
 			:echo menu_info('File.Save', 'n')
+
+			" Display the entire menu hierarchy in a buffer
+			func ShowMenu(name, pfx)
+			  let m = menu_info(a:name)
+			  call append(line('$'), a:pfx .. m.display)
+			  for child in m->get('submenus', [])
+			    call ShowMenu(a:name .. '.' .. escape(child, '.'),
+							\ a:pfx .. '    ')
+			  endfor
+			endfunc
+			new
+			for topmenu in menu_info('').submenus
+			  call ShowMenu(topmenu, '')
+			endfor
 <
 		Can also be used as a |method|: >
 			GetMenuName()->menu_info('v')
@@ -8043,7 +8189,7 @@ mode([expr])	Return a string that indicates the current mode.
 		returned, otherwise only the first letter is returned.
 		Also see |state()|.
 
-		   n	    Normal, Terminal-Normal
+		   n	    Normal
 		   no	    Operator-pending
 		   nov	    Operator-pending (forced characterwise |o_v|)
 		   noV	    Operator-pending (forced linewise |o_V|)
@@ -8052,23 +8198,25 @@ mode([expr])	Return a string that indicates the current mode.
 		   niI	    Normal using |i_CTRL-O| in |Insert-mode|
 		   niR	    Normal using |i_CTRL-O| in |Replace-mode|
 		   niV	    Normal using |i_CTRL-O| in |Virtual-Replace-mode|
+		   nt	    Terminal-Normal (insert goes to Terminal-Job mode)
 		   v	    Visual by character
+		   vs	    Visual by character using |v_CTRL-O| in Select mode
 		   V	    Visual by line
+		   Vs	    Visual by line using |v_CTRL-O| in Select mode
 		   CTRL-V   Visual blockwise
+		   CTRL-Vs  Visual blockwise using |v_CTRL-O| in Select mode
 		   s	    Select by character
 		   S	    Select by line
 		   CTRL-S   Select blockwise
-		   vs	    Visual by character using |v_CTRL-O| from
-				Select mode
-		   Vs	    Visual by line using |v_CTRL-O| from Select mode
-		   CTRL-Vs  Visual blockwise using |v_CTRL-O| from Select mode
 		   i	    Insert
 		   ic	    Insert mode completion |compl-generic|
 		   ix	    Insert mode |i_CTRL-X| completion
 		   R	    Replace |R|
 		   Rc	    Replace mode completion |compl-generic|
-		   Rv	    Virtual Replace |gR|
 		   Rx	    Replace mode |i_CTRL-X| completion
+		   Rv	    Virtual Replace |gR|
+		   Rvc	    Virtual Replace mode completion |compl-generic|
+		   Rvx	    Virtual Replace mode |i_CTRL-X| completion
 		   c	    Command-line editing
 		   cv	    Vim Ex mode |gQ|
 		   ce	    Normal Ex mode |Q|
@@ -8077,6 +8225,7 @@ mode([expr])	Return a string that indicates the current mode.
 		   r?	    A |:confirm| query of some sort
 		   !	    Shell or external command is executing
 		   t	    Terminal-Job mode: keys go to the job
+
 		This is useful in the 'statusline' option or when used
 		with |remote_expr()| In most other places it always returns
 		"c" or "n".
@@ -8131,7 +8280,7 @@ nr2char({expr} [, {utf8}])				*nr2char()*
 <		When {utf8} is omitted or zero, the current 'encoding' is used.
 		Example for "utf-8": >
 			nr2char(300)		returns I with bow character
-<		With {utf8} set to 1, always return utf-8 characters.
+<		When {utf8} is TRUE, always return UTF-8 characters.
 		Note that a NUL character in the file is specified with
 		nr2char(10), because NULs are represented with newline
 		characters.  nr2char(0) is a real NUL and terminates the
@@ -9612,7 +9761,7 @@ setcellwidths({list})					*setcellwidths()*
 		tells Vim how wide characters are, counted in screen cells.
 		This overrides 'ambiwidth'.  Example: >
 		   setcellwidths([[0xad, 0xad, 1],
-		   		\ [0x2194, 0x2199, 2]])
+				\ [0x2194, 0x2199, 2]])
 
 <					*E1109* *E1110* *E1111* *E1112* *E1113*
 		The {list} argument is a list of lists with each three
@@ -9625,6 +9774,9 @@ setcellwidths({list})					*setcellwidths()*
 		range overlaps with another.
 		Only characters with value 0x100 and higher can be used.
 
+		If the new value causes 'fillchars' or 'listchars' to become
+		invalid it is rejected and an error is given.
+
 		To clear the overrides pass an empty list: >
 		   setcellwidths([]);
 <		You can use the script $VIMRUNTIME/tools/emoji_list.vim to see
@@ -10526,7 +10678,7 @@ state([{what}])						*state()*
 		    w	blocked on waiting, e.g. ch_evalexpr(), ch_read() and
 			ch_readraw() when reading json
 		    S	not triggering SafeState or SafeStateAgain, e.g. after
-		    	|f| or a count
+			|f| or a count
 		    c	callback invoked, including timer (repeats for
 			recursiveness up to "ccc")
 		    s	screen has scrolled for messages
@@ -10561,8 +10713,8 @@ str2list({string} [, {utf8}])					*str2list()*
 <		|list2str()| does the opposite.
 
 		When {utf8} is omitted or zero, the current 'encoding' is used.
-		With {utf8} set to 1, always treat the String as utf-8
-		characters.  With utf-8 composing characters are handled
+		When {utf8} is TRUE, always treat the String as UTF-8
+		characters.  With UTF-8 composing characters are handled
 		properly: >
 			str2list("á")		returns [97, 769]
 
@@ -12078,6 +12230,7 @@ There are three types of features:
 1.  Features that are only supported when they have been enabled when Vim
     was compiled |+feature-list|.  Example: >
 	:if has("cindent")
+<							*gui_running*
 2.  Features that are only supported when certain conditions have been met.
     Example: >
 	:if has("gui_running")
@@ -12212,6 +12365,7 @@ multi_byte_encoding	'encoding' is set to a multibyte encoding.
 multi_byte_ime		Compiled with support for IME input method.
 multi_lang		Compiled with support for multiple languages.
 mzscheme		Compiled with MzScheme interface |mzscheme|.
+nanotime		Compiled with sub-second time stamp checks.
 netbeans_enabled	Compiled with support for |netbeans| and connected.
 netbeans_intg		Compiled with support for |netbeans|.
 num64			Compiled with 64-bit |Number| support.
@@ -13096,7 +13250,7 @@ text...
 			literal then the items also cannot be changed: >
 				const ll = [1, 2, 3]
 				let ll[1] = 5  " Error!
-< 			Nested references are not locked: >
+<			Nested references are not locked: >
 				let lvar = ['a']
 				const lconst = [0, lvar]
 				let lconst[0] = 2  " Error!
@@ -13150,8 +13304,8 @@ text...
 			Example with [depth] 0: >
 				let mylist = [1, 2, 3]
 				lockvar 0 mylist
-				let mylist[0] = 77   	" OK
-				call add(mylist, 4]  	" OK
+				let mylist[0] = 77	" OK
+				call add(mylist, 4]	" OK
 				let mylist = [7, 8, 9]  " Error!
 <								*E743*
 			For unlimited depth use [!] and omit [depth].

runtime/doc/filetype.txt

@@ -1,4 +1,4 @@
-*filetype.txt*  For Vim version 8.2.  Last change: 2021 Mar 11
+*filetype.txt*  For Vim version 8.2.  Last change: 2021 Sep 22
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -545,6 +545,14 @@ One command, :DiffGitCached, is provided to show a diff of the current commit
 in the preview window.  It is equivalent to calling "git diff --cached" plus
 any arguments given to the command.
 
+GPROF							*ft-gprof-plugin*
+
+The gprof filetype plugin defines a mapping <C-]> to jump from a function
+entry in the gprof flat profile or from a function entry in the call graph
+to the details of that function in the call graph.
+
+The mapping can be disabled with: >
+	let g:no_gprof_maps = 1
 
 MAIL							*ft-mail-plugin*
 

runtime/doc/gui_w32.txt

@@ -323,20 +323,10 @@ These extra colors are also available:
 Gray, Grey, LightYellow, SeaGreen, Orange, Purple, SlateBlue, Violet,
 
 								*rgb.txt*
-Additionally, colors defined by a "rgb.txt" file can be used.  This file is
-well known from X11.  A few lines from it: >
-
-  255 218 185		   peach puff
-  205 133  63		   peru
-  255 181 197		   pink
-
-This shows the layout of the file:  First the R, G and B value as a decimal
-number, followed by the name of the color.  The four fields are separated by
-spaces.
-
-You can get an rgb.txt file from any X11 distribution.  It is located in a
-directory like "/usr/X11R6/lib/X11/".  For Vim it must be located in the
-$VIMRUNTIME directory.  Thus the file can be found with "$VIMRUNTIME/rgb.txt".
+Additionally, colors defined by a default color list can be used.  For more
+info see |:colorscheme|.  These colors used to be defined in
+$VIMRUNTIME/rgb.txt, now they are in |v:colornames| which is initialized from
+$VIMRUNTIME/colors/lists/default.vim.
 
 ==============================================================================
 						*gui-w32-dialogs* *dialog*

runtime/doc/help.txt

@@ -88,6 +88,7 @@ Tuning Vim ~
 |usr_43.txt|  Using filetypes
 |usr_44.txt|  Your own syntax highlighted
 |usr_45.txt|  Select your language
+|usr_46.txt|  Write plugins using Vim9 script
 
 Making Vim Run ~
 |usr_90.txt|  Installing Vim

runtime/doc/if_lua.txt

@@ -227,14 +227,14 @@ Vim evaluation and command execution, and others.
                                                         *lua-vim-variables*
 The Vim editor global dictionaries |g:| |w:| |b:| |t:| |v:| can be accessed
 from Lua conveniently and idiomatically by referencing the `vim.*` Lua tables
-described below. In this way you can easily read and modify global Vimscript
+described below. In this way you can easily read and modify global Vim script
 variables from Lua.
 
 Example: >
 
-    vim.g.foo = 5     -- Set the g:foo Vimscript variable.
-    print(vim.g.foo)  -- Get and print the g:foo Vimscript variable.
-    vim.g.foo = nil   -- Delete (:unlet) the Vimscript variable.
+    vim.g.foo = 5     -- Set the g:foo Vim script variable.
+    print(vim.g.foo)  -- Get and print the g:foo Vim script variable.
+    vim.g.foo = nil   -- Delete (:unlet) the Vim script variable.
 
 vim.g                                                   *vim.g*
         Global (|g:|) editor variables.

runtime/doc/insert.txt

@@ -1,4 +1,4 @@
-*insert.txt*    For Vim version 8.2.  Last change: 2021 Aug 31
+*insert.txt*    For Vim version 8.2.  Last change: 2021 Oct 18
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -824,6 +824,9 @@ CTRL-X CTRL-K		Search the files given with the 'dictionary' option
 	CTRL-P		Search backwards for next matching keyword.  This
 			keyword replaces the previous matching keyword.
 
+
+Completing words in 'thesaurus'				*compl-thesaurus*
+
 							*i_CTRL-X_CTRL-T*
 CTRL-X CTRL-T		Works as CTRL-X CTRL-K, but in a special way.  It uses
 			the 'thesaurus' option instead of 'dictionary'.  If a
@@ -832,16 +835,6 @@ CTRL-X CTRL-T		Works as CTRL-X CTRL-K, but in a special way.  It uses
 			matches, even though they don't complete the word.
 			Thus a word can be completely replaced.
 
-			For an example, imagine the 'thesaurus' file has a
-			line like this: >
-				angry furious mad enraged
-<			Placing the cursor after the letters "ang" and typing
-			CTRL-X CTRL-T would complete the word "angry";
-			subsequent presses would change the word to "furious",
-			"mad" etc.
-			Other uses include translation between two languages,
-			or grouping API functions by keyword.
-
 	CTRL-T	or
 	CTRL-N		Search forward for next matching keyword.  This
 			keyword replaces the previous matching keyword.
@@ -849,6 +842,61 @@ CTRL-X CTRL-T		Works as CTRL-X CTRL-K, but in a special way.  It uses
 	CTRL-P		Search backwards for next matching keyword.  This
 			keyword replaces the previous matching keyword.
 
+In the file used by the 'thesaurus' option each line in the file should
+contain words with similar meaning, separated by non-keyword characters (white
+space is preferred).  Maximum line length is 510 bytes.
+
+For an example, imagine the 'thesaurus' file has a line like this: >
+	angry furious mad enraged
+<Placing the cursor after the letters "ang" and typing CTRL-X CTRL-T would
+complete the word "angry"; subsequent presses would change the word to
+"furious", "mad" etc.
+
+Other uses include translation between two languages, or grouping API
+functions by keyword.
+
+An English word list was added to this github issue:
+https://github.com/vim/vim/issues/629#issuecomment-443293282
+Unpack thesaurus_pkg.zip, put the thesaurus.txt file somewhere, e.g.
+~/.vim/thesaurus/english.txt, and the 'thesaurus' option to this file name.
+
+					
+Completing keywords with 'thesaurusfunc'		*compl-thesaurusfunc*
+
+If the 'thesaurusfunc' option is set, then the user specified function is
+invoked to get the list of completion matches and the 'thesaurus' option is
+not used. See |complete-functions| for an explanation of how the function is
+invoked and what it should return.
+
+Here is an example that uses the "aiksaurus" command (provided by Magnus
+Groß): >
+
+	func Thesaur(findstart, base)
+	    if a:findstart
+		let line = getline('.')
+		let start = col('.') - 1
+		while start > 0 && line[start - 1] =~ '\a'
+		   let start -= 1
+		endwhile
+		return start
+	    else
+		let res = []
+		let h = ''
+		for l in split(system('aiksaurus '.shellescape(a:base)), '\n')
+		    if l[:3] == '=== '
+		    	let h = substitute(l[4:], ' =*$', '', '')
+		    elseif l[0] =~ '\a'
+			call extend(res, map(split(l, ', '), {_, val -> {'word': val, 'menu': '('.h.')'}}))
+		    endif
+		endfor
+		return res
+	    endif
+	endfunc
+
+	if exists('+thesaurusfunc')
+	    set thesaurusfunc=Thesaur
+	endif
+
 
 Completing keywords in the current and included files	*compl-keyword*
 
@@ -1052,7 +1100,7 @@ CTRL-X CTRL-Z		Stop completion without changing the text.
 
 FUNCTIONS FOR FINDING COMPLETIONS			*complete-functions*
 
-This applies to 'completefunc' and 'omnifunc'.
+This applies to 'completefunc', 'thesaurusfunc' and 'omnifunc'.
 
 The function is called in two different ways:
 - First the function is called to find the start of the text to be completed.

runtime/doc/intro.txt

@@ -1,4 +1,4 @@
-*intro.txt*     For Vim version 8.2.  Last change: 2020 Dec 29
+*intro.txt*     For Vim version 8.2.  Last change: 2021 Sep 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -421,7 +421,6 @@ notation	meaning		    equivalent	decimal value(s)	~
 <Tab>		tab			CTRL-I	  9	*tab* *Tab*
 							*linefeed*
 <NL>		linefeed		CTRL-J	 10 (used for <Nul>)
-<FF>		formfeed		CTRL-L	 12	*formfeed*
 <CR>		carriage return		CTRL-M	 13	*carriage-return*
 <Return>	same as <CR>				*<Return>*
 <Enter>		same as <CR>				*<Enter>*

runtime/doc/map.txt

@@ -1,4 +1,4 @@
-*map.txt*       For Vim version 8.2.  Last change: 2021 Aug 05
+*map.txt*       For Vim version 8.2.  Last change: 2021 Oct 19
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1004,6 +1004,9 @@ Also note that the 'clipboard' option is temporarily emptied to avoid
 clobbering the `"*` or `"+` registers, if its value contains the item `unnamed`
 or `unnamedplus`.
 
+The `mode()` function will return the state as it will be after applying the
+operator.
+
 ==============================================================================
 2. Abbreviations			*abbreviations* *Abbreviations*
 

runtime/doc/mbyte.txt

@@ -1,4 +1,4 @@
-*mbyte.txt*     For Vim version 8.2.  Last change: 2021 Apr 05
+*mbyte.txt*     For Vim version 8.2.  Last change: 2021 Oct 04
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar et al.
@@ -1132,7 +1132,7 @@ This file explains what characters are available in UTF-8 and CP1255 encodings,
 and what the keymaps are to get those characters:
 
 glyph   encoding	   keymap ~
-Char   utf-8 cp1255  hebrew  hebrewp  name ~
+Char UTF-8 cp1255  hebrew  hebrewp  name ~
 א    0x5d0  0xe0     t	      a     'alef
 ב    0x5d1  0xe1     c	      b     bet
 ג    0x5d2  0xe2     d	      g     gimel
@@ -1185,11 +1185,11 @@ Vowel marks and special punctuation:
 ױ    0x5f1  0xd5     VY      VY   vav-yod
 ײ    0x5f2  0xd6     YY      YY   yod-yod
 
-The following are only available in utf-8
+The following are only available in UTF-8
 
 Cantillation marks:
 glyph
-Char utf-8 hebrew name
+Char UTF-8 hebrew name
 ב֑    0x591   C:   etnahta
 ב֒    0x592   Cs   segol
 ב֓    0x593   CS   shalshelet
@@ -1300,7 +1300,7 @@ ASCII.   On MS-Windows UTF-16 is also used (previously UCS-2), which uses
 internally.
 
 Vim has comprehensive UTF-8 support.  It works well in:
-- xterm with utf-8 support enabled
+- xterm with UTF-8 support enabled
 - Athena, Motif and GTK GUI
 - MS-Windows GUI
 - several other platforms
@@ -1313,13 +1313,13 @@ is no longer relevant in the GTK+ 2 GUI.
 							*bom-bytes*
 When reading a file a BOM (Byte Order Mark) can be used to recognize the
 Unicode encoding:
-	EF BB BF     utf-8
-	FE FF        utf-16 big endian
-	FF FE        utf-16 little endian
-	00 00 FE FF  utf-32 big endian
-	FF FE 00 00  utf-32 little endian
+	EF BB BF     UTF-8
+	FE FF        UTF-16 big endian
+	FF FE        UTF-16 little endian
+	00 00 FE FF  UTF-32 big endian
+	FF FE 00 00  UTF-32 little endian
 
-Utf-8 is the recommended encoding.  Note that it's difficult to tell utf-16
+UTF-8 is the recommended encoding.  Note that it's difficult to tell utf-16
 and utf-32 apart.  Utf-16 is often used on MS-Windows, utf-32 is not
 widespread as file format.
 
@@ -1365,8 +1365,8 @@ Useful commands:
 
 STARTING VIM
 
-If your current locale is in an utf-8 encoding, Vim will automatically start
-in utf-8 mode.
+If your current locale is in an UTF-8 encoding, Vim will automatically start
+in UTF-8 mode.
 
 If you are using another locale: >
 
@@ -1399,10 +1399,10 @@ Motif.  Use the ":hi Menu font={fontname}" command for this. |:highlight|
 TYPING UTF-8						*utf-8-typing*
 
 If you are using X-Windows, you should find an input method that supports
-utf-8.
+UTF-8.
 
-If your system does not provide support for typing utf-8, you can use the
-'keymap' feature.  This allows writing a keymap file, which defines a utf-8
+If your system does not provide support for typing UTF-8, you can use the
+'keymap' feature.  This allows writing a keymap file, which defines a UTF-8
 character as a sequence of ASCII characters.  See |mbyte-keymap|.
 
 Another method is to set the current locale to the language you want to use

runtime/doc/message.txt

@@ -141,6 +141,11 @@ larger.  When it's more there probably is an endless loop.  Probably a
 The color name {name} is unknown.  See |gui-colors| for a list of colors that
 are available on most systems.
 
+							*E1244*  >
+  Bad color string: {str}
+
+The provided color did not conform to the pattern #rrggbb
+
 							*E458*  >
   Cannot allocate colormap entry, some colors may be incorrect
 

runtime/doc/options.txt

@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 8.2.  Last change: 2021 Sep 06
+*options.txt*	For Vim version 8.2.  Last change: 2021 Oct 20
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -717,7 +717,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	"double":	Use twice the width of ASCII characters.
 							*E834* *E835*
 	The value "double" cannot be used if 'listchars' or 'fillchars'
-	contains a character that would be double width.
+	contains a character that would be double width.  These errors may
+	also be given when calling setcellwidths().
 
 	The values are overruled for characters specified with
 	|setcellwidths()|.
@@ -2410,7 +2411,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	   xchacha20	XChaCha20 Cipher with Poly1305 Message Authentication
 			Code.  Medium strong till strong encryption.
 			Encryption is provided by the libsodium library, it
-			requires Vim to be built with |+sodium|
+			requires Vim to be built with |+sodium|.
 			It adds a seed and a message authentication code (MAC)
 			to the file.  This needs at least a Vim 8.2.3022 to
 			read the encrypted file.
@@ -3610,8 +3611,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	systems without an fsync() implementation, this variable is always
 	off.
 	Also see 'swapsync' for controlling fsync() on swap files.
-	'fsync' also applies to |writefile()|, unless a flag is used to
-	overrule it.
+	'fsync' also applies to |writefile()| (unless a flag is used to
+	overrule it) and when writing undo files (see |undo-persistence|).
 	This option cannot be set from a |modeline| or in the |sandbox|, for
 	security reasons.
 
@@ -3790,6 +3791,18 @@ A jump table for the options with a short description can be found at |Q_op|.
 	screen.  Set it to a negative value to allow windows taller than the
 	screen.
 
+						*'guiligatures'* *'gli'* *E1243*
+'guiligatures' 'gli'	string	(default "")
+			global
+			{only for GTK GUI}
+	List of ASCII characters that, when combined together, can create more
+	complex shapes. Each character must be a printable ASCII character
+	with a value in the 32-127 range.
+	Example: >
+		:set guiligatures=!\"#$%&()*+-./:<=>?@[]^_{\|~
+<	Changing this option updates screen output immediately. Set it to an
+	empty string to disable ligatures.
+
 						*'guioptions'* *'go'*
 'guioptions' 'go'	string	(default "egmrLtT"   (MS-Windows,
 					   "t" is removed in |defaults.vim|),
@@ -4978,12 +4991,20 @@ A jump table for the options with a short description can be found at |Q_op|.
 	be used when 'encoding' is "utf-8", otherwise only printable
 	characters are allowed.  All characters must be single width.
 
+	Each character can be specified as hex: >
+		set listchars=eol:\\x24
+		set listchars=eol:\\u21b5
+		set listchars=eol:\\U000021b5
+<	Note that a double backslash is used.  The number of hex characters
+	must be exactly 2 for \\x, 4 for \\u and 8 for \\U.
+
 	Examples: >
 	    :set lcs=tab:>-,trail:-
 	    :set lcs=tab:>-,eol:<,nbsp:%
 	    :set lcs=extends:>,precedes:<
 <	The "NonText" highlighting will be used for "eol", "extends" and
-	"precedes".  "SpecialKey" for "nbsp", "space", "tab" and "trail".
+	"precedes".  "SpecialKey" will be used for "tab", "nbsp", "space",
+	"multispace", "lead" and "trail".
 	|hl-NonText| |hl-SpecialKey|
 
 			*'lpl'* *'nolpl'* *'loadplugins'* *'noloadplugins'*
@@ -7405,13 +7426,13 @@ A jump table for the options with a short description can be found at |Q_op|.
 	      return value of expr contains % items they will get expanded.
 	      The expression can contain the } character, the end of
 	      expression is denoted by %}.
-	      The For example: >
+	      For example: >
 		func! Stl_filename() abort
 		    return "%t"
 		endfunc
 <	        `stl=%{Stl_filename()}`   results in `"%t"`
 	        `stl=%{%Stl_filename()%}` results in `"Name of current file"`
-	} -   End of `{%` expression
+	%} -  End of `{%` expression
 	( -   Start of item group.  Can be used for setting the width and
 	      alignment of a section.  Must be followed by %) somewhere.
 	) -   End of item group.  No width fields allowed.
@@ -8007,25 +8028,30 @@ A jump table for the options with a short description can be found at |Q_op|.
 'thesaurus' 'tsr'	string	(default "")
 			global or local to buffer |global-local|
 	List of file names, separated by commas, that are used to lookup words
-	for thesaurus completion commands |i_CTRL-X_CTRL-T|.
+	for thesaurus completion commands |i_CTRL-X_CTRL-T|.  See
+	|compl-thesaurus|.
 
-	Each line in the file should contain words with similar meaning,
-	separated by non-keyword characters (white space is preferred).
-	Maximum line length is 510 bytes.
-
-	An English word list was added to this github issue:
-	https://github.com/vim/vim/issues/629#issuecomment-443293282
-	Unpack thesaurus_pkg.zip, put the thesaurus.txt file somewhere, e.g.
-	~/.vim/thesaurus/english.txt, and the 'thesaurus' option to this file
-	name.
+	This option is not used if 'thesaurusfunc' is set, either for the
+	buffer or globally.
 
 	To include a comma in a file name precede it with a backslash.  Spaces
 	after a comma are ignored, otherwise spaces are included in the file
-	name.  See |option-backslash| about using backslashes.
-	The use of |:set+=| and |:set-=| is preferred when adding or removing
-	directories from the list.  This avoids problems when a future version
-	uses another default.
-	Backticks cannot be used in this option for security reasons.
+	name.  See |option-backslash| about using backslashes.  The use of
+	|:set+=| and |:set-=| is preferred when adding or removing directories
+	from the list.  This avoids problems when a future version uses
+	another default.  Backticks cannot be used in this option for security
+	reasons.
+
+						*'thesaurusfunc'* *tsrfu'*
+'thesaurusfunc' 'tsrfu'	string	(default: empty)
+			global or local to buffer |global-local|
+			{not available when compiled without the |+eval|
+			feature}
+	This option specifies a function to be used for thesaurus completion
+	with CTRL-X CTRL-T. |i_CTRL-X_CTRL-T| See |compl-thesaurusfunc|.
+
+	This option cannot be set from a |modeline| or in the |sandbox|, for
+	security reasons.
 
 			     *'tildeop'* *'top'* *'notildeop'* *'notop'*
 'tildeop' 'top'		boolean	(default off)
@@ -8780,8 +8806,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	More info here: |cmdline-completion|.
 	The character is not recognized when used inside a macro.  See
 	'wildcharm' for that.
+	Some keys will not work, such as CTRL-C, <CR> and Enter.
 	Although 'wc' is a number option, you can set it to a special key: >
-		:set wc=<Esc>
+		:set wc=<Tab>
 <	NOTE: This option is set to the Vi default value when 'compatible' is
 	set and to the Vim default value when 'compatible' is reset.
 

runtime/doc/os_haiku.txt

@@ -194,9 +194,8 @@ $VIM/macros/swapmous.vim for an example.		|gui-mouse-mapping|
 
 11. Color names						*haiku-colors*
 
-Vim has a number of color names built-in.  Additional names are read from the
-file $VIMRUNTIME/rgb.txt, if present.  This file is basically the color
-database from X.  Names used from this file are cached for efficiency.
+Vim has a number of color names built-in. Additional names can be defined in
+|v:colornames|. See |:colorscheme| for details.
 
 
 12. GUI Toolbar Images					*haiku-toolbar-images*

runtime/doc/pattern.txt

@@ -932,7 +932,7 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 \%.l    Matches at the cursor line.
 \%<.l   Matches above the cursor line.
 \%>.l   Matches below the cursor line.
-	These three can be used to match specific lines in a buffer.  The "23"
+	These six can be used to match specific lines in a buffer.  The "23"
 	can be any line number.  The first line is 1.
 	WARNING: When inserting or deleting lines Vim does not automatically
 	update the matches.  This means Syntax highlighting quickly becomes
@@ -953,16 +953,15 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 \%.c    Matches at the cursor column.
 \%<.c   Matches before the cursor column.
 \%>.c   Matches after the cursor column.
-	These three can be used to match specific columns in a buffer or
-	string.  The "23" can be any column number.  The first column is 1.
-	Actually, the column is the byte number (thus it's not exactly right
-	for multibyte characters).
+	These six can be used to match specific columns in a buffer or string.
+	The "23" can be any column number.  The first column is 1.  Actually,
+	the column is the byte number (thus it's not exactly right for
+	multibyte characters).
 	WARNING: When inserting or deleting text Vim does not automatically
 	update the matches.  This means Syntax highlighting quickly becomes
 	wrong.  Also when referring to the cursor position (".") and
 	the cursor moves the display isn't updated for this change.  An update
 	is done when using the |CTRL-L| command (the whole screen is updated).
-
 	Example, to highlight the column where the cursor currently is: >
 		:exe '/\%' . col(".") . 'c'
 <	Alternatively use: >
@@ -980,8 +979,8 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 \%.v    Matches at the current virtual column.
 \%<.v   Matches before the current virtual column.
 \%>.v   Matches after the current virtual column.
-	These three can be used to match specific virtual columns in a buffer
-	or string.  When not matching with a buffer in a window, the option
+	These six can be used to match specific virtual columns in a buffer or
+	string.  When not matching with a buffer in a window, the option
 	values of the current window are used (e.g., 'tabstop').
 	The "23" can be any column number.  The first column is 1.
 	Note that some virtual column positions will never match, because they
@@ -1012,7 +1011,7 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 		/.*\%17v
 <	Column 17 is highlighted by 'hlsearch' because there is another match
 	where ".*" matches zero characters.
-<
+
 
 Character classes:
 \i	identifier character (see 'isident' option)	*/\i*

runtime/doc/print.txt

@@ -1,4 +1,4 @@
-*print.txt*     For Vim version 8.2.  Last change: 2020 Aug 15
+*print.txt*     For Vim version 8.2.  Last change: 2021 Oct 04
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -717,7 +717,7 @@ There are a couple of points to bear in mind:
 ==============================================================================
 8. Formfeed Characters					*printing-formfeed*
 
-By default Vim does not do any special processing of |formfeed| control
+By default Vim does not do any special processing of formfeed control
 characters.  Setting the 'printoptions' formfeed item will make Vim recognize
 formfeed characters and continue printing the current line at the beginning
 of the first line on a new page.  The use of formfeed characters provides

runtime/doc/quickref.txt

@@ -1,4 +1,4 @@
-*quickref.txt*  For Vim version 8.2.  Last change: 2021 Mar 29
+*quickref.txt*  For Vim version 8.2.  Last change: 2021 Oct 17
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -732,6 +732,7 @@ Short explanation of each option:		*option-list*
 'guifontset'	  'gfs'     GUI: Names of multibyte fonts to be used
 'guifontwide'	  'gfw'     list of font names for double-wide characters
 'guiheadroom'	  'ghr'     GUI: pixels room for window decorations
+'guiligatures'	  'gli'	    GTK GUI: ASCII characters that can form shapes
 'guioptions'	  'go'	    GUI: Which components and options are used
 'guipty'		    GUI: try to use a pseudo-tty for ":!" commands
 'guitablabel'	  'gtl'     GUI: custom label for a tab page
@@ -948,6 +949,7 @@ Short explanation of each option:		*option-list*
 'textmode'	  'tx'	    obsolete, use 'fileformat'
 'textwidth'	  'tw'	    maximum width of text that is being inserted
 'thesaurus'	  'tsr'     list of thesaurus files for keyword completion
+'thesaurusfunc'	  'tsrfu'   function to be used for thesaurus completion
 'tildeop'	  'top'     tilde command "~" behaves like an operator
 'timeout'	  'to'	    time out on mappings and key codes
 'timeoutlen'	  'tm'	    time out time in milliseconds

runtime/doc/sign.txt

@@ -520,6 +520,7 @@ sign_jump({id}, {group}, {buf})
 		{buf} and position the cursor at sign {id} in group {group}.
 		This is similar to the |:sign-jump| command.
 
+		If {group} is an empty string, then the global group is used.
 		For the use of {buf}, see |bufname()|.
 
 		Returns the line number of the sign. Returns -1 if the

runtime/doc/syntax.txt

@@ -4849,6 +4849,7 @@ in their own color.
 :hi[ghlight] {group-name}
 			List one highlight group.
 
+						*highlight-clear*
 :hi[ghlight] clear	Reset all highlighting to the defaults.  Removes all
 			highlighting for groups added by the user!
 			Uses the current value of 'background' to decide which
@@ -5143,8 +5144,35 @@ guisp={color-name}					*highlight-guisp*
 		"gg"	is the Green value
 		"bb"	is the Blue value
 	All values are hexadecimal, range from "00" to "ff".  Examples: >
-  :highlight Comment guifg=#11f0c3 guibg=#ff00ff
+            :highlight Comment guifg=#11f0c3 guibg=#ff00ff
 <
+	If you are authoring a color scheme and use the same hexademical value
+	repeatedly, you can define a name for it in |v:colornames|. For
+	example: >
+
+	    # provide a default value for this color but allow the user to
+	    # override it.
+	    :call extend(v:colornames, {'alt_turquoise': '#11f0c3'}, 'keep')
+	    :highlight Comment guifg=alt_turquoise guibg=magenta
+<
+	If you are using a color scheme that relies on named colors and you
+	would like to adjust the precise appearance of those colors, you can
+	do so by overriding the values in |v:colornames| prior to loading the
+	scheme: >
+
+	    let v:colornames['alt_turquoise'] = '#22f0d3'
+	    colorscheme alt
+<
+	If you want to develop a color list that can be relied on by others,
+	it is best to prefix your color names. By convention these color lists
+	are placed in the colors/lists directory. You can see an example in
+	'$VIMRUNTIME/colors/lists/csscolors.vim'. This list would be sourced
+	by a color scheme using: >
+
+	    :runtime colors/lists/csscolors.vim
+	    :highlight Comment guifg=css_turquoise
+<
+
 					*highlight-groups* *highlight-default*
 These are the default highlighting groups.  These groups are used by the
 'highlight' option default.  Note that the highlighting depends on the value

runtime/doc/tags

@@ -302,6 +302,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'gfs'	options.txt	/*'gfs'*
 'gfw'	options.txt	/*'gfw'*
 'ghr'	options.txt	/*'ghr'*
+'gli'	options.txt	/*'gli'*
 'go'	options.txt	/*'go'*
 'go-!'	options.txt	/*'go-!'*
 'go-A'	options.txt	/*'go-A'*
@@ -339,6 +340,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'guifontset'	options.txt	/*'guifontset'*
 'guifontwide'	options.txt	/*'guifontwide'*
 'guiheadroom'	options.txt	/*'guiheadroom'*
+'guiligatures'	options.txt	/*'guiligatures'*
 'guioptions'	options.txt	/*'guioptions'*
 'guipty'	options.txt	/*'guipty'*
 'guitablabel'	options.txt	/*'guitablabel'*
@@ -1138,6 +1140,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'tgc'	options.txt	/*'tgc'*
 'tgst'	options.txt	/*'tgst'*
 'thesaurus'	options.txt	/*'thesaurus'*
+'thesaurusfunc'	options.txt	/*'thesaurusfunc'*
 'tildeop'	options.txt	/*'tildeop'*
 'timeout'	options.txt	/*'timeout'*
 'timeoutlen'	options.txt	/*'timeoutlen'*
@@ -2077,6 +2080,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :XMLent	insert.txt	/*:XMLent*
 :XMLns	insert.txt	/*:XMLns*
 :[range]	motion.txt	/*:[range]*
+:[vV\x16]	autocmd.txt	/*:[vV\\x16]*
 :\bar	cmdline.txt	/*:\\bar*
 :_!	cmdline.txt	/*:_!*
 :_#	cmdline.txt	/*:_#*
@@ -3989,7 +3993,10 @@ E123	eval.txt	/*E123*
 E1231	map.txt	/*E1231*
 E1232	eval.txt	/*E1232*
 E1233	eval.txt	/*E1233*
+E1237	map.txt	/*E1237*
+E1239	eval.txt	/*E1239*
 E124	eval.txt	/*E124*
+E1243	options.txt	/*E1243*
 E125	eval.txt	/*E125*
 E126	eval.txt	/*E126*
 E127	eval.txt	/*E127*
@@ -4941,6 +4948,7 @@ FileChangedRO	autocmd.txt	/*FileChangedRO*
 FileChangedShell	autocmd.txt	/*FileChangedShell*
 FileChangedShellPost	autocmd.txt	/*FileChangedShellPost*
 FileEncoding	autocmd.txt	/*FileEncoding*
+FileExplorer	autocmd.txt	/*FileExplorer*
 FileReadCmd	autocmd.txt	/*FileReadCmd*
 FileReadPost	autocmd.txt	/*FileReadPost*
 FileReadPre	autocmd.txt	/*FileReadPre*
@@ -5015,6 +5023,7 @@ Macintosh	os_mac.txt	/*Macintosh*
 Mark	motion.txt	/*Mark*
 MenuPopup	autocmd.txt	/*MenuPopup*
 MiNT	os_mint.txt	/*MiNT*
+ModeChanged	autocmd.txt	/*ModeChanged*
 Moolenaar	intro.txt	/*Moolenaar*
 MorphOS	os_amiga.txt	/*MorphOS*
 Motif	gui_x11.txt	/*Motif*
@@ -5553,10 +5562,12 @@ beval_winnr-variable	eval.txt	/*beval_winnr-variable*
 binary-number	eval.txt	/*binary-number*
 bitwise-function	usr_41.txt	/*bitwise-function*
 blob	eval.txt	/*blob*
+blob-functions	usr_41.txt	/*blob-functions*
 blob-identity	eval.txt	/*blob-identity*
 blob-index	eval.txt	/*blob-index*
 blob-literal	eval.txt	/*blob-literal*
 blob-modification	eval.txt	/*blob-modification*
+blob2list()	eval.txt	/*blob2list()*
 blockwise-examples	visual.txt	/*blockwise-examples*
 blockwise-operators	visual.txt	/*blockwise-operators*
 blockwise-register	change.txt	/*blockwise-register*
@@ -5924,6 +5935,8 @@ compl-omni-filetypes	insert.txt	/*compl-omni-filetypes*
 compl-spelling	insert.txt	/*compl-spelling*
 compl-stop	insert.txt	/*compl-stop*
 compl-tag	insert.txt	/*compl-tag*
+compl-thesaurus	insert.txt	/*compl-thesaurus*
+compl-thesaurusfunc	insert.txt	/*compl-thesaurusfunc*
 compl-vim	insert.txt	/*compl-vim*
 compl-whole-line	insert.txt	/*compl-whole-line*
 complete()	eval.txt	/*complete()*
@@ -6545,7 +6558,6 @@ format-bullet-list	tips.txt	/*format-bullet-list*
 format-comments	change.txt	/*format-comments*
 format-formatexpr	change.txt	/*format-formatexpr*
 formatting	change.txt	/*formatting*
-formfeed	intro.txt	/*formfeed*
 fortran.vim	syntax.txt	/*fortran.vim*
 friendship	intro.txt	/*friendship*
 frombook	usr_01.txt	/*frombook*
@@ -6604,6 +6616,7 @@ ft-fortran-plugin	filetype.txt	/*ft-fortran-plugin*
 ft-fortran-syntax	syntax.txt	/*ft-fortran-syntax*
 ft-fvwm-syntax	syntax.txt	/*ft-fvwm-syntax*
 ft-gitcommit-plugin	filetype.txt	/*ft-gitcommit-plugin*
+ft-gprof-plugin	filetype.txt	/*ft-gprof-plugin*
 ft-groff-syntax	syntax.txt	/*ft-groff-syntax*
 ft-gsp-syntax	syntax.txt	/*ft-gsp-syntax*
 ft-haskell-syntax	syntax.txt	/*ft-haskell-syntax*
@@ -7200,6 +7213,7 @@ gui-x11-printing	gui_x11.txt	/*gui-x11-printing*
 gui-x11-start	gui_x11.txt	/*gui-x11-start*
 gui-x11-various	gui_x11.txt	/*gui-x11-various*
 gui.txt	gui.txt	/*gui.txt*
+gui_running	eval.txt	/*gui_running*
 gui_w32.txt	gui_w32.txt	/*gui_w32.txt*
 gui_x11.txt	gui_x11.txt	/*gui_x11.txt*
 guifontwide_gtk	gui.txt	/*guifontwide_gtk*
@@ -7701,6 +7715,7 @@ lcs-conceal	options.txt	/*lcs-conceal*
 lcs-eol	options.txt	/*lcs-eol*
 lcs-extends	options.txt	/*lcs-extends*
 lcs-lead	options.txt	/*lcs-lead*
+lcs-multispace	options.txt	/*lcs-multispace*
 lcs-nbsp	options.txt	/*lcs-nbsp*
 lcs-precedes	options.txt	/*lcs-precedes*
 lcs-space	options.txt	/*lcs-space*
@@ -7735,6 +7750,7 @@ list-identity	eval.txt	/*list-identity*
 list-index	eval.txt	/*list-index*
 list-modification	eval.txt	/*list-modification*
 list-repeat	windows.txt	/*list-repeat*
+list2blob()	eval.txt	/*list2blob()*
 list2str()	eval.txt	/*list2str()*
 listener_add()	eval.txt	/*listener_add()*
 listener_flush()	eval.txt	/*listener_flush()*
@@ -9817,6 +9833,7 @@ try-echoerr	eval.txt	/*try-echoerr*
 try-finally	eval.txt	/*try-finally*
 try-nested	eval.txt	/*try-nested*
 try-nesting	eval.txt	/*try-nesting*
+tsrfu'	options.txt	/*tsrfu'*
 tutor	usr_01.txt	/*tutor*
 twice	if_cscop.txt	/*twice*
 two-engines	pattern.txt	/*two-engines*

runtime/doc/terminal.txt

@@ -168,9 +168,6 @@ terminal window will start with a white or black background.
 To use a different color the Terminal highlight group can be used, for
 example: >
     hi Terminal ctermbg=lightgrey ctermfg=blue guibg=lightgrey guifg=blue
-The highlight needs to be defined before the terminal is created.  Doing it
-later, or setting 'wincolor', will only have effect when the program running
-in the terminal displays text or clears the terminal.
 Instead of Terminal another group can be specified with the "term_highlight"
 option for `term_start()`.
 

runtime/doc/testing.txt

@@ -85,14 +85,14 @@ test_getvalue({name})					*test_getvalue()*
 test_gui_drop_files({list}, {row}, {col}, {mods})
 		Drop one or more files in {list} in the window at {row}, {col}.
 		This function only works when the GUI is running and the
-		|drag-n-drop| feature is present.
-		
+		|drop_file| feature is present.
+
 		The supported values for {mods} are:
 			0x4	Shift
 			0x8	Alt
 			0x10	Ctrl
-		The files are added to the argument list and the first file in
-		{list} is edited in the window.  See |drag-n-drop| for more
+		The files are added to the |argument-list| and the first file
+		in {list} is edited in the window.  See |drag-n-drop| for more
 		information.
 
 						*test_gui_mouse_event()*

runtime/doc/textprop.txt

@@ -160,7 +160,7 @@ prop_add({lnum}, {col}, {props})
 
 		Can also be used as a |method|: >
 			GetLnum()->prop_add(col, props)
-
+<
 						*prop_add_list()*
 prop_add_list({props}, [[{lnum}, {col}, {end-lnum}, {end-col}], ...])
 		Similar to prop_add(), but attaches a text property at

runtime/doc/todo.txt

@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 8.2.  Last change: 2021 Sep 08
+*todo.txt*      For Vim version 8.2.  Last change: 2021 Oct 16
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -38,12 +38,13 @@ browser use: https://github.com/vim/vim/issues/1234
 							*known-bugs*
 -------------------- Known bugs and current work -----------------------
 
-:delcommand -buffer should work
-
 Vim9 - Make everything work:
-- Disallow using numbered function with "g:123" in Vim9 script?  #8760
-- use CheckLegacyAndVim9Success(lines) in many more places
+- "filter #pat# ls" should work, #pat# is not a comment
+    vim9script
+    edit foobar
+    filter #foobar# ls
 - Check TODO items in vim9compile.c and vim9execute.c
+- use CheckLegacyAndVim9Success(lines) in many more places
 - For builtin functions using tv_get_string*() use check_for_string() to be
   more strict about the argument type (not a bool).
     done: balloon_()
@@ -366,10 +367,6 @@ autocommands for the buffer lifecycle:
     BufIsRenamed  (after buffer ID gets another name)
 The buffer list and windows are locked, no changes possible
 
-Add a ModeChanged autocommand that has an argument indicating the old and new
-mode, as what's returned from mode().  Also used for switching Terminal mode.
-#8360, #7863, #7363
-
 Matchparen doesn't remove highlight after undo. (#7054)
 Is OK when syntax HL is active.
 
@@ -431,6 +428,9 @@ undo result wrong: Masato Nishihata, #4798
 After recovering from a swap file the undofile should not be used, it causes
 corruption.  (#6631)
 
+When the computer crashes while writing the undofile, the contents may be
+lost.  Write to a temp file, fsync and rename. (#8879)
+
 When 'lazyredraw' is set sometimes the title is not updated.
 (Jason Franklin, 2020 Feb 3)  Looks like a race condition.
 
@@ -628,24 +628,27 @@ Window size changes after closing a tab. (#4741)
 
 Problem with colors in terminal window. (Jason Franklin, 2019 May 12)
 
-Lifepillar: Updated/cleaned up color schemes:
-https://github.com/lifepillar/vim8-colorschemes.
-
-Include a few color schemes, based on popularity:
-http://www.vim.org/scripts/script_search_results.php?keywords=&script_type=color+scheme&order_by=rating&direction=descending&search=search
+Color schemes:
+NOTE: modernizing the default colorschemes _AND_ introducing new ones is now
+a project in its own right: https://github.com/vim/colorschemes. Feel free to
+reach out if you want to lend a hand.
+- Lifepillar: Updated/cleaned up color schemes:
+  https://github.com/lifepillar/vim8-colorschemes.
+- Include a few color schemes, based on popularity:
+  - http://www.vim.org/scripts/script_search_results.php?keywords=&script_type=color+scheme&order_by=rating&direction=descending&search=search
 http://vimawesome.com/?q=tag:color-scheme
-Use names that indicate their appearance (Christian Brabandt, 2017 Aug 3)
-- monokai - Xia Crusoe (2017 Aug 4)
-- seoul256 - Christian Brabandt (2017 Aug 3)
-- gruvbox -  Christian Brabandt (2017 Aug 3) (simplified version from
-      Lifepillar, 2018 Jan 22, #2573)
-- janah - Marco Hinz (2017 Aug 4)
-- apprentice - Romain Lafourcade (2017 Aug 6)  remarks about help file #1964
-Suggested by Hiroki Kokubun:
-- [Iceberg](https://github.com/cocopon/iceberg.vim) (my one)
-- [hybrid](https://github.com/w0ng/vim-hybrid)
-Include solarized color scheme?, it does not support termguicolors.
-- Sanitized version of pablo (Lifepillar, 2017 Nov 21)
+- Use names that indicate their appearance (Christian Brabandt, 2017 Aug 3)
+  - monokai - Xia Crusoe (2017 Aug 4)
+  - seoul256 - Christian Brabandt (2017 Aug 3)
+  - gruvbox -  Christian Brabandt (2017 Aug 3) (simplified version from
+        Lifepillar, 2018 Jan 22, #2573)
+  - janah - Marco Hinz (2017 Aug 4)
+  - apprentice - Romain Lafourcade (2017 Aug 6)  remarks about help file #1964
+- Suggested by Hiroki Kokubun:
+  - [Iceberg](https://github.com/cocopon/iceberg.vim) (my one)
+  - [hybrid](https://github.com/w0ng/vim-hybrid)
+- Include solarized color scheme?, it does not support termguicolors.
+  - Sanitized version of pablo (Lifepillar, 2017 Nov 21)
 
 Bug: "vipgw" does not put cursor back where it belongs. (Jason Franklin, 2019
 Mar 5)
@@ -4845,7 +4848,6 @@ Autocommands:
     command used dos fileformat.  Same for 'fileencoding'.
 -   Add events to autocommands:
     Error	    - When an error happens
-    ModeChange	    - after changing mode (before waiting for a char)
     VimLeaveCheck    - Before Vim decides to exit, so that it can be cancelled
 		      when exiting isn't a good idea.
     CursorHoldC     - CursorHold while command-line editing

runtime/doc/usr_06.txt

@@ -184,7 +184,30 @@ this command: >
 	:runtime syntax/colortest.vim
 
 You will see text in various color combinations.  You can check which ones are
-readable and look nice.
+readable and look nice. These aren't the only colors available to you though.
+You can specify #rrggbb hex colors and you can define new names for hex
+colors in |v:colornames| like so: >
+
+	let v:colornames['mine_red'] = '#aa0000'
+<
+If you are authoring a color scheme for others to use, it is important
+to define these colors only when they do not exist: >
+
+	call extend(v:colornames, {'mine_red': '#aa0000'}, 'keep')
+
+This allows users of the color scheme to override the precise definition of
+that color prior to loading your color scheme. For example, in a |.vimrc|
+file:
+
+	runtime colors/lists/css_colors.vim
+	let v:colornames['your_red'] = v:colornames['css_red']
+	colorscheme yourscheme
+
+As a color scheme author, you should be able to rely on some color names for
+GUI colors. These are defined in `colors/lists/default.vim`. All such files
+found on the |runtimepath| are loaded each time the colorscheme command is
+run. A canonical list is provided by the vim distribution, which should
+include all X11 colors (previously defined in rgb.txt).
 
 ==============================================================================
 *06.4*	With colors or without colors

runtime/doc/usr_41.txt

@@ -1,4 +1,4 @@
-*usr_41.txt*	For Vim version 8.2.  Last change: 2021 Aug 08
+*usr_41.txt*	For Vim version 8.2.  Last change: 2021 Sep 10
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -925,6 +925,8 @@ Syntax and highlighting:	  *syntax-functions* *highlighting-functions*
 	getmatches()		get all matches defined by |matchadd()| and
 				the |:match| commands
 	hlexists()		check if a highlight group exists
+	hlget()			get highlight group attributes
+	hlset()			set highlight group attributes
 	hlID()			get ID of a highlight group
 	synID()			get syntax ID at a specific position
 	synIDattr()		get a specific attribute of a syntax ID

runtime/doc/various.txt

@@ -172,7 +172,7 @@ g8			Print the hex values of the bytes used in the
 
 							*:z!*
 :[range]z![+-^.=][count]
-			Like ":z:", but when [count] is not specified, it
+			Like ":z", but when [count] is not specified, it
 			defaults to the Vim window height minus one.
 
 :[range]z[!]#[+-^.=][count]				*:z#*

runtime/doc/vim9.txt

@@ -1,4 +1,4 @@
-*vim9.txt*	For Vim version 8.2.  Last change: 2021 Sep 08
+*vim9.txt*	For Vim version 8.2.  Last change: 2021 Sep 13
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -103,7 +103,7 @@ script and `:def` functions; details are below:
 	writefile(['done'], 'file.txt')
 - You cannot use `:xit`, `:t`, `:k`, `:append`, `:change`, `:insert`, `:open`,
   and `:s` or `:d` with only flags.
-  or curly-braces names.
+- You cannot use curly-braces names.
 - A range before a command must be prefixed with a colon: >
 	:%s/this/that
 - Executing a register with "@r" does not work, you can prepend a colon or use
@@ -180,6 +180,15 @@ For now you will need to pass the dictionary explicitly: >
 	var d = {item: 'value', func: DictFunc}
 	d.func(d, 'item')
 
+You can call a legacy dict function though: >
+	func Legacy() dict
+	  echo self.value
+	endfunc
+	def CallLegacy()
+	  var d = {func: Legacy, value: 'text'}
+	  d.func()
+	enddef
+
 The argument types and return type need to be specified.  The "any" type can
 be used, type checking will then be done at runtime, like with legacy
 functions.
@@ -197,7 +206,7 @@ When a function argument is optional (it has a default value) passing `v:none`
 as the argument results in using the default value.  This is useful when you
 want to specify a value for an argument that comes after an argument that
 should use its default value.  Example: >
-	def MyFunc(one = 'one', last = 'last)
+	def MyFunc(one = 'one', last = 'last')
 	  ...
 	enddef
 	MyFunc(v:none, 'LAST')  # first argument uses default value 'one'
@@ -622,7 +631,7 @@ at the start of the line indicates line continuation: >
 		|   echo 'match'
 		| endif
 
-Note that this means that in heredoc the first line cannot be a bar: >
+Note that this means that in heredoc the first line cannot start with a bar: >
 	var lines =<< trim END
 	   | this doesn't work
 	END
@@ -630,7 +639,7 @@ Either use an empty line at the start or do not use heredoc.  Or temporarily
 add the "C" flag to 'cpoptions': >
 	set cpo+=C
 	var lines =<< trim END
-	   | this doesn't work
+	   | this works
 	END
 	set cpo-=C
 If the heredoc is inside a function 'cpoptions' must be set before :def and
@@ -933,9 +942,22 @@ Ex command ranges need to be prefixed with a colon. >
 
 Some Ex commands can be confused with assignments in Vim9 script: >
 	g:name = value    # assignment
-	g:pattern:cmd	  # invalid command - ERROR
 	:g:pattern:cmd	  # :global command
 
+To avoid confusion between a `:global` or `:substitute` command and an
+expression or assignment, a few separators cannot be used when these commands
+are abbreviated to a single character: ':', '-' and '.'. >
+	g:pattern:cmd	  # invalid command - ERROR
+	s:pattern:repl	  # invalid command - ERROR
+	g-pattern-cmd	  # invalid command - ERROR
+	s-pattern-repl	  # invalid command - ERROR
+	g.pattern.cmd	  # invalid command - ERROR
+	s.pattern.repl	  # invalid command - ERROR
+
+Also, there cannot be a space between the command and the separator: >
+	g /pattern/cmd	  # invalid command - ERROR
+	s /pattern/repl	  # invalid command - ERROR
+
 Functions defined with `:def` compile the whole function.  Legacy functions
 can bail out, and the following lines are not parsed: >
 	func Maybe()
@@ -1096,7 +1118,7 @@ The map argument is a string expression, which is evaluated without the
 function scope.  Instead, use a lambda: >
 	def MapList(): list<string>
 	  var list = ['aa', 'bb', 'cc', 'dd']
-	  return range(1, 2)->map(( _, v) => list[v])
+	  return range(1, 2)->map((_, v) => list[v])
 	enddef
 
 The same is true for commands that are not compiled, such as `:global`.
@@ -1300,16 +1322,16 @@ an error, thus breaking backwards compatibility.  For example:
 - Using a string value when setting a number option.
 - Using a number where a string is expected.   *E1024*
 
-One consequence is that the item type of a list or dict given to map() must
+One consequence is that the item type of a list or dict given to |map()| must
 not change.  This will give an error in Vim9 script: >
-	vim9 echo map([1, 2, 3], (i, v) => 'item ' .. i)
+	echo map([1, 2, 3], (i, v) => 'item ' .. i)
 	E1012: Type mismatch; expected number but got string
-Instead use |mapnew(): >
-	vim9 echo mapnew([1, 2, 3], (i, v) => 'item ' .. i)
+Instead use |mapnew()|: >
+	echo mapnew([1, 2, 3], (i, v) => 'item ' .. i)
 	['item 0', 'item 1', 'item 2']
 
 If the item type was determined to be "any" it can change to a more specific
-type.  E.g. when a list of mixed types gets changed to a list of numbers: >
+type.  E.g. when a list of mixed types gets changed to a list of strings: >
 	var mylist = [1, 2.0, '3']
 	# typename(mylist) == "list<any>"
 	map(mylist, (i, v) => 'item ' .. i)

runtime/doc/windows.txt

@@ -1358,6 +1358,7 @@ directory	Displays directory contents.  Can be used by a file explorer
 <		The buffer name is the name of the directory and is adjusted
 		when using the |:cd| command.
 
+						*scratch-buffer*
 scratch		Contains text that can be discarded at any time.  It is kept
 		when closing the window, it must be deleted explicitly.
 		Settings: >

runtime/filetype.vim

@@ -1,7 +1,7 @@
 " Vim support file to detect file types
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2021 Aug 23
+" Last Change:	2021 Oct 03
 
 " Listen very carefully, I will say this only once
 if exists("did_load_filetypes")
@@ -488,7 +488,7 @@ au BufNewFile,BufRead *.desktop,*.directory	setf desktop
 au BufNewFile,BufRead dict.conf,.dictrc		setf dictconf
 
 " Dictd config
-au BufNewFile,BufRead dictd.conf		setf dictdconf
+au BufNewFile,BufRead dictd*.conf		setf dictdconf
 
 " Diff files
 au BufNewFile,BufRead *.diff,*.rej		setf diff
@@ -707,6 +707,7 @@ au BufNewFile,BufRead *.gpi			setf gnuplot
 
 " Go (Google)
 au BufNewFile,BufRead *.go			setf go
+au BufNewFile,BufRead Gopkg.lock		setf toml
 
 " GrADS scripts
 au BufNewFile,BufRead *.gs			setf grads
@@ -876,6 +877,9 @@ au BufNewFile,BufRead *.json-patch			setf json
 " Jupyter Notebook is also json
 au BufNewFile,BufRead *.ipynb				setf json
 
+" Other files that look like json
+au BufNewFile,BufRead .babelrc,.eslintrc,.prettierrc,.firebaserc  setf json
+
 " JSONC
 au BufNewFile,BufRead *.jsonc			setf jsonc
 
@@ -1092,6 +1096,9 @@ au BufNewFile,BufRead *.moo			setf moo
 " Modconf
 au BufNewFile,BufRead */etc/modules.conf,*/etc/modules,*/etc/conf.modules setf modconf
 
+" MPD is based on XML
+au BufNewFile,BufRead *.mpd			setf xml
+
 " Mplayer config
 au BufNewFile,BufRead mplayer.conf,*/.mplayer/config	setf mplayerconf
 
@@ -1110,6 +1117,9 @@ au BufNewFile,BufRead *.mysql			setf mysql
 " Mutt setup files (must be before catch *.rc)
 au BufNewFile,BufRead */etc/Muttrc.d/*		call s:StarSetf('muttrc')
 
+" Tcl Shell RC file
+au BufNewFile,BufRead tclsh.rc			setf tcl
+
 " M$ Resource files
 au BufNewFile,BufRead *.rc,*.rch		setf rc
 
@@ -1140,6 +1150,9 @@ au BufNewFile,BufRead Neomuttrc			setf neomuttrc
 " Netrc
 au BufNewFile,BufRead .netrc			setf netrc
 
+" Nginx
+au BufNewFile,BufRead *.nginx,nginx*.conf,*nginx.conf,*/etc/nginx/*,*/usr/local/nginx/conf/*,*/nginx/*.conf			setf nginx
+
 " Ninja file
 au BufNewFile,BufRead *.ninja			setf ninja
 
@@ -1278,7 +1291,7 @@ au BufNewFile,BufRead *.rcp			setf pilrc
 au BufNewFile,BufRead .pinerc,pinerc,.pinercex,pinercex		setf pine
 
 " Pipenv Pipfiles
-au BufNewFile,BufRead Pipfile			setf config
+au BufNewFile,BufRead Pipfile			setf toml
 au BufNewFile,BufRead Pipfile.lock		setf json
 
 " PL/1, PL/I
@@ -1512,6 +1525,7 @@ au BufNewFile,BufRead [rR]antfile,*.rant,[rR]akefile,*.rake	setf ruby
 
 " Rust
 au BufNewFile,BufRead *.rs			setf rust
+au BufNewFile,BufRead Cargo.lock,*/.cargo/config,*/.cargo/credentials	setf toml
 
 " S-lang (or shader language, or SmallLisp)
 au BufNewFile,BufRead *.sl			setf slang
@@ -1802,7 +1816,7 @@ au BufRead,BufNewFile {pending,completed,undo}.data  setf taskdata
 au BufRead,BufNewFile *.task			setf taskedit
 
 " Tcl (JACL too)
-au BufNewFile,BufRead *.tcl,*.tk,*.itcl,*.itk,*.jacl	setf tcl
+au BufNewFile,BufRead *.tcl,*.tm,*.tk,*.itcl,*.itk,*.jacl,.tclshrc,.wishrc	setf tcl
 
 " TealInfo
 au BufNewFile,BufRead *.tli			setf tli
@@ -1996,14 +2010,15 @@ au BufNewFile,BufRead *.ws[fc]			setf wsh
 " XHTML
 au BufNewFile,BufRead *.xhtml,*.xht		setf xhtml
 
-" X Pixmap (dynamically sets colors, use BufEnter to make it work better)
-au BufEnter *.xpm
+" X Pixmap (dynamically sets colors, this used to trigger on BufEnter to make
+" it work better, but that breaks setting 'filetype' manually)
+au BufNewFile,BufRead *.xpm
 	\ if getline(1) =~ "XPM2" |
 	\   setf xpm2 |
 	\ else |
 	\   setf xpm |
 	\ endif
-au BufEnter *.xpm2				setf xpm2
+au BufNewFile,BufRead *.xpm2			setf xpm2
 
 " XFree86 config
 au BufNewFile,BufRead XF86Config
@@ -2138,7 +2153,7 @@ au BufNewFile,BufRead proftpd.conf*					call s:StarSetf('apachestyle')
 
 " More Apache config files
 au BufNewFile,BufRead access.conf*,apache.conf*,apache2.conf*,httpd.conf*,srm.conf*	call s:StarSetf('apache')
-au BufNewFile,BufRead */etc/apache2/*.conf*,*/etc/apache2/conf.*/*,*/etc/apache2/mods-*/*,*/etc/apache2/sites-*/*,*/etc/httpd/conf.d/*.conf*		call s:StarSetf('apache')
+au BufNewFile,BufRead */etc/apache2/*.conf*,*/etc/apache2/conf.*/*,*/etc/apache2/mods-*/*,*/etc/apache2/sites-*/*,*/etc/httpd/conf.*/*,*/etc/httpd/mods-*/*,*/etc/httpd/sites-*/*,*/etc/httpd/conf.d/*.conf*		call s:StarSetf('apache')
 
 " Asterisk config file
 au BufNewFile,BufRead *asterisk/*.conf*		call s:StarSetf('asterisk')
@@ -2292,6 +2307,9 @@ au BufNewFile,BufRead .tcshrc*	call dist#ft#SetFileTypeShell("tcsh")
 " csh scripts ending in a star
 au BufNewFile,BufRead .login*,.cshrc*  call dist#ft#CSH()
 
+" tmux configuration with arbitrary extension
+au BufNewFile,BufRead {.,}tmux*.conf*		setf tmux
+
 " VHDL
 au BufNewFile,BufRead *.vhdl_[0-9]*		call s:StarSetf('vhdl')
 

runtime/ftplugin/8th.vim

@@ -1,9 +1,10 @@
 " Vim ftplugin file
 " Language:	8th
 " Version:	any
-" Last Change:	2015/11/08
+" Last Change:	2021 Sep 20
+" Last Change:	2021/09/20
 " Maintainer:	Ron Aaron <ron@aaron-tech.com>
-" URL:          https://8th-dev.com/
+" URL:		https://8th-dev.com/
 " Filetypes:	*.8th
 " NOTE: 	8th allows any non-whitespace in a name, so you need to do:
 " 		setlocal iskeyword=!,@,33-35,%,$,38-64,A-Z,91-96,a-z,123-126,128-255
@@ -14,12 +15,13 @@ if exists("b:did_8thplugin")
  finish
 endif
 
-" Don't load another plugin for this buffer
+" Don't load another 8th plugin for this buffer
 let b:did_8thplugin = 1
 
 setlocal ts=2 sts=2 sw=2 et
-setlocal com=s1:/*,mb:*,ex:*/,:\|,:\\
+setlocal com=s1:/*,mb:*,ex:*/,b:--,be:\\
 setlocal fo=tcrqol
 setlocal matchpairs+=\::;
 setlocal iskeyword=!,@,33-35,%,$,38-64,A-Z,91-96,a-z,123-126,128-255
 setlocal suffixesadd=.8th
+let b:undo_ftplugin = "setlocal ts< sts< sw< et< com< fo< mps< isk< sua<"

runtime/ftplugin/c.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:	C
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2020 Feb 01
+" Last Change:	2021 Sep 21
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -40,8 +40,11 @@ endif
 
 " When the matchit plugin is loaded, this makes the % command skip parens and
 " braces in comments properly.
-let b:match_words = '^\s*#\s*if\(\|def\|ndef\)\>:^\s*#\s*elif\>:^\s*#\s*else\>:^\s*#\s*endif\>'
-let b:match_skip = 's:comment\|string\|character\|special'
+if !exists("b:match_words")
+  let b:match_words = '^\s*#\s*if\(\|def\|ndef\)\>:^\s*#\s*elif\>:^\s*#\s*else\>:^\s*#\s*endif\>'
+  let b:match_skip = 's:comment\|string\|character\|special'
+  let b:undo_ftplugin ..= " | unlet! b:match_skip b:match_words"
+endif
 
 " Win32 can filter files in the browse dialog
 if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
@@ -62,6 +65,7 @@ if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
 	  \ "C++ Source Files (*.cpp *.c++)\t*.cpp;*.c++\n" .
 	  \ "All Files (*.*)\t*.*\n"
   endif
+  let b:undo_ftplugin ..= " | unlet! b:browsefilter"
 endif
 
 let &cpo = s:cpo_save

runtime/ftplugin/changelog.vim

@@ -2,7 +2,7 @@
 " Language:             generic Changelog file
 " Maintainer:           Martin Florian <marfl@posteo.de>
 " Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2015-10-25
+" Latest Revision:      2021-10-17
 " Variables:
 "   g:changelog_timeformat (deprecated: use g:changelog_dateformat instead) -
 "       description: the timeformat used in ChangeLog entries.
@@ -55,7 +55,7 @@ if &filetype == 'changelog'
     elseif $EMAIL_ADDRESS != ""
       return $EMAIL_ADDRESS
     endif
-    
+
     let login = s:login()
     return printf('%s <%s@%s>', s:name(login), login, s:hostname())
   endfunction
@@ -223,12 +223,6 @@ if &filetype == 'changelog'
     let &paste = save_paste
   endfunction
 
-  if exists(":NewChangelogEntry") != 2
-    nnoremap <buffer> <silent> <Leader>o :<C-u>call <SID>new_changelog_entry('')<CR>
-    xnoremap <buffer> <silent> <Leader>o :<C-u>call <SID>new_changelog_entry('')<CR>
-    command! -nargs=0 NewChangelogEntry call s:new_changelog_entry('')
-  endif
-
   let b:undo_ftplugin = "setl com< fo< et< ai<"
 
   setlocal comments=
@@ -241,14 +235,26 @@ if &filetype == 'changelog'
     let b:undo_ftplugin .= " tw<"
   endif
 
+  if !exists("no_plugin_maps") && !exists("no_changelog_maps") && exists(":NewChangelogEntry") != 2
+    nnoremap <buffer> <silent> <Leader>o :<C-u>call <SID>new_changelog_entry('')<CR>
+    xnoremap <buffer> <silent> <Leader>o :<C-u>call <SID>new_changelog_entry('')<CR>
+    command! -buffer -nargs=0 NewChangelogEntry call s:new_changelog_entry('')
+    let b:undo_ftplugin .= " | sil! exe 'nunmap <buffer> <Leader>o'" .
+          \                " | sil! exe 'vunmap <buffer> <Leader>o'" .
+          \                " | sil! delc NewChangelogEntry"
+  endif
+
   let &cpo = s:cpo_save
   unlet s:cpo_save
 else
   let s:cpo_save = &cpo
   set cpo&vim
 
-  " Add the Changelog opening mapping
-  nnoremap <silent> <Leader>o :call <SID>open_changelog()<CR>
+  if !exists("no_plugin_maps") && !exists("no_changelog_maps")
+    " Add the Changelog opening mapping
+    nnoremap <silent> <Leader>o :call <SID>open_changelog()<CR>
+    let b:undo_ftplugin .= " | silent! exe 'nunmap <buffer> <Leader>o"
+  endif
 
   function! s:open_changelog()
     let path = expand('%:p:h')

runtime/ftplugin/context.vim

@@ -2,7 +2,7 @@
 " Language:           ConTeXt typesetting engine
 " Maintainer:         Nicola Vitacolonna <nvitacolonna@gmail.com>
 " Former Maintainers: Nikolai Weibull <now@bitwi.se>
-" Latest Revision:    2016 Oct 30
+" Latest Revision:    2021 Oct 15
 
 if exists("b:did_ftplugin")
   finish
@@ -17,7 +17,6 @@ if !exists('current_compiler')
 endif
 
 let b:undo_ftplugin = "setl com< cms< def< inc< sua< fo< ofu<"
-      \ . "| unlet! b:match_ignorecase b:match_words b:match_skip"
 
 setlocal comments=b:%D,b:%C,b:%M,:% commentstring=%\ %s formatoptions+=tjcroql2
 if get(b:, 'context_metapost', get(g:, 'context_metapost', 1))
@@ -35,11 +34,12 @@ let &l:include = '^\s*\\\%(input\|component\|product\|project\|environment\)'
 
 setlocal suffixesadd=.tex
 
-if exists("loaded_matchit")
+if exists("loaded_matchit") && !exists("b:match_words")
   let b:match_ignorecase = 0
   let b:match_skip = 'r:\\\@<!\%(\\\\\)*%'
   let b:match_words = '(:),\[:],{:},\\(:\\),\\\[:\\],' .
         \ '\\start\(\a\+\):\\stop\1'
+  let b:undo_ftplugin .= " | unlet! b:match_ignorecase b:match_words b:match_skip"
 endif
 
 let s:context_regex = {
@@ -57,19 +57,28 @@ function! s:move_around(count, what, flags, visual)
   call map(range(2, a:count), 'search(s:context_regex[a:what], a:flags)')
 endfunction
 
-" Move around macros.
-nnoremap <silent><buffer> [[ :<C-U>call <SID>move_around(v:count1, "beginsection", "bW", v:false) <CR>
-vnoremap <silent><buffer> [[ :<C-U>call <SID>move_around(v:count1, "beginsection", "bW", v:true)  <CR>
-nnoremap <silent><buffer> ]] :<C-U>call <SID>move_around(v:count1, "beginsection", "W",  v:false) <CR>
-vnoremap <silent><buffer> ]] :<C-U>call <SID>move_around(v:count1, "beginsection", "W",  v:true)  <CR>
-nnoremap <silent><buffer> [] :<C-U>call <SID>move_around(v:count1, "endsection",   "bW", v:false) <CR>
-vnoremap <silent><buffer> [] :<C-U>call <SID>move_around(v:count1, "endsection",   "bW", v:true)  <CR>
-nnoremap <silent><buffer> ][ :<C-U>call <SID>move_around(v:count1, "endsection",   "W",  v:false) <CR>
-vnoremap <silent><buffer> ][ :<C-U>call <SID>move_around(v:count1, "endsection",   "W",  v:true)  <CR>
-nnoremap <silent><buffer> [{ :<C-U>call <SID>move_around(v:count1, "beginblock",   "bW", v:false) <CR>
-vnoremap <silent><buffer> [{ :<C-U>call <SID>move_around(v:count1, "beginblock",   "bW", v:true)  <CR>
-nnoremap <silent><buffer> ]} :<C-U>call <SID>move_around(v:count1, "endblock",     "W",  v:false) <CR>
-vnoremap <silent><buffer> ]} :<C-U>call <SID>move_around(v:count1, "endblock",     "W",  v:true)  <CR>
+if !exists("no_plugin_maps") && !exists("no_context_maps")
+  " Move around macros.
+  nnoremap <silent><buffer> [[ :<C-U>call <SID>move_around(v:count1, "beginsection", "bW", v:false) <CR>
+  vnoremap <silent><buffer> [[ :<C-U>call <SID>move_around(v:count1, "beginsection", "bW", v:true)  <CR>
+  nnoremap <silent><buffer> ]] :<C-U>call <SID>move_around(v:count1, "beginsection", "W",  v:false) <CR>
+  vnoremap <silent><buffer> ]] :<C-U>call <SID>move_around(v:count1, "beginsection", "W",  v:true)  <CR>
+  nnoremap <silent><buffer> [] :<C-U>call <SID>move_around(v:count1, "endsection",   "bW", v:false) <CR>
+  vnoremap <silent><buffer> [] :<C-U>call <SID>move_around(v:count1, "endsection",   "bW", v:true)  <CR>
+  nnoremap <silent><buffer> ][ :<C-U>call <SID>move_around(v:count1, "endsection",   "W",  v:false) <CR>
+  vnoremap <silent><buffer> ][ :<C-U>call <SID>move_around(v:count1, "endsection",   "W",  v:true)  <CR>
+  nnoremap <silent><buffer> [{ :<C-U>call <SID>move_around(v:count1, "beginblock",   "bW", v:false) <CR>
+  vnoremap <silent><buffer> [{ :<C-U>call <SID>move_around(v:count1, "beginblock",   "bW", v:true)  <CR>
+  nnoremap <silent><buffer> ]} :<C-U>call <SID>move_around(v:count1, "endblock",     "W",  v:false) <CR>
+  vnoremap <silent><buffer> ]} :<C-U>call <SID>move_around(v:count1, "endblock",     "W",  v:true)  <CR>
+
+  let b:undo_ftplugin .= " | sil! exe 'nunmap <buffer> [[' | sil! exe 'vunmap <buffer> [['" .
+	\                " | sil! exe 'nunmap <buffer> ]]' | sil! exe 'vunmap <buffer> ]]'" .
+	\                " | sil! exe 'nunmap <buffer> []' | sil! exe 'vunmap <buffer> []'" .
+	\                " | sil! exe 'nunmap <buffer> ][' | sil! exe 'vunmap <buffer> ]['" .
+	\                " | sil! exe 'nunmap <buffer> [{' | sil! exe 'vunmap <buffer> [{'" .
+	\                " | sil! exe 'nunmap <buffer> ]}' | sil! exe 'vunmap <buffer> ]}'"
+end
 
 " Other useful mappings
 if get(g:, 'context_mappings', 1)
@@ -81,16 +90,22 @@ if get(g:, 'context_mappings', 1)
     call cursor(search(s:tp_regex, 'W') - 1, 1)
   endf
 
-  " Reflow paragraphs with commands like gqtp ("gq TeX paragraph")
-  onoremap <silent><buffer> tp :<c-u>call <sid>tp()<cr>
-  " Select TeX paragraph
-  vnoremap <silent><buffer> tp <esc>:<c-u>call <sid>tp()<cr>
+  if !exists("no_plugin_maps") && !exists("no_context_maps")
+    " Reflow paragraphs with commands like gqtp ("gq TeX paragraph")
+    onoremap <silent><buffer> tp :<c-u>call <sid>tp()<cr>
+    " Select TeX paragraph
+    vnoremap <silent><buffer> tp <esc>:<c-u>call <sid>tp()<cr>
 
-  " $...$ text object
-  onoremap <silent><buffer> i$ :<c-u>normal! T$vt$<cr>
-  onoremap <silent><buffer> a$ :<c-u>normal! F$vf$<cr>
-  vnoremap <buffer> i$ T$ot$
-  vnoremap <buffer> a$ F$of$
+    " $...$ text object
+    onoremap <silent><buffer> i$ :<c-u>normal! T$vt$<cr>
+    onoremap <silent><buffer> a$ :<c-u>normal! F$vf$<cr>
+    vnoremap <buffer> i$ T$ot$
+    vnoremap <buffer> a$ F$of$
+
+    let b:undo_ftplugin .= " | sil! exe 'ounmap <buffer> tp' | sil! exe 'vunmap <buffer> tp'" .
+	  \                " | sil! exe 'ounmap <buffer> i$' | sil! exe 'vunmap <buffer> i$'" .
+	  \                " | sil! exe 'ounmap <buffer> a$' | sil! exe 'vunmap <buffer> a$'"
+    endif
 endif
 
 " Commands for asynchronous typesetting

runtime/ftplugin/csh.vim

@@ -1,21 +1,23 @@
 " Vim filetype plugin file
-" Language:	csh
-" Maintainer:	Dan Sharp <dwsharp at users dot sourceforge dot net>
-" Last Changed: 20 Jan 2009
-" URL:		http://dwsharp.users.sourceforge.net/vim/ftplugin
+" Language:		csh
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Dan Sharp <dwsharp at users dot sourceforge dot net>
+" Contributor:		Johannes Zellner <johannes@zellner.org>
+" Last Change:		2021 Oct 15
 
 if exists("b:did_ftplugin") | finish | endif
 let b:did_ftplugin = 1
 
-" Make sure the continuation lines below do not cause problems in
-" compatibility mode.
 let s:save_cpo = &cpo
 set cpo-=C
 
+setlocal comments=:#
 setlocal commentstring=#%s
 setlocal formatoptions-=t
 setlocal formatoptions+=crql
 
+let b:undo_ftplugin = "setlocal com< cms< fo<"
+
 " Csh:  thanks to Johannes Zellner
 " - Both foreach and end must appear alone on separate lines.
 " - The words else and endif must appear at the beginning of input lines;
@@ -23,26 +25,27 @@ setlocal formatoptions+=crql
 " - Each case label and the default label must appear at the start of a
 "   line.
 " - while and end must appear alone on their input lines.
-if exists("loaded_matchit")
-    let b:match_words =
-      \ '^\s*\<if\>.*(.*).*\<then\>:'.
-      \   '^\s*\<else\>\s\+\<if\>.*(.*).*\<then\>:^\s*\<else\>:'.
-      \   '^\s*\<endif\>,'.
-      \ '\%(^\s*\<foreach\>\s\+\S\+\|^s*\<while\>\).*(.*):'.
-      \   '\<break\>:\<continue\>:^\s*\<end\>,'.
-      \ '^\s*\<switch\>.*(.*):^\s*\<case\>\s\+:^\s*\<default\>:^\s*\<endsw\>'
+if exists("loaded_matchit") && !exists("b:match_words")
+  let s:line_start = '\%(^\s*\)\@<='
+  let b:match_words =
+	\ s:line_start .. 'if\s*(.*)\s*then\>:' ..
+	\   s:line_start .. 'else\s\+if\s*(.*)\s*then\>:' .. s:line_start .. 'else\>:' ..
+	\   s:line_start .. 'endif\>,' ..
+	\ s:line_start .. '\%(\<foreach\s\+\h\w*\|while\)\s*(:' ..
+	\   '\<break\>:\<continue\>:' ..
+	\   s:line_start .. 'end\>,' ..
+	\ s:line_start .. 'switch\s*(:' ..
+	\   s:line_start .. 'case\s\+:' .. s:line_start .. 'default\>:\<breaksw\>:' ..
+	\   s:line_start .. 'endsw\>'
+  unlet s:line_start
+  let b:undo_ftplugin ..= " | unlet b:match_words"
 endif
 
-" Change the :browse e filter to primarily show csh-related files.
-if has("gui_win32")
-    let  b:browsefilter="csh Scripts (*.csh)\t*.csh\n" .
-		\	"All Files (*.*)\t*.*\n"
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let  b:browsefilter="csh Scripts (*.csh)\t*.csh\n" ..
+	\	      "All Files (*.*)\t*.*\n"
+  let b:undo_ftplugin ..= " | unlet b:browsefilter"
 endif
 
-" Undo the stuff we changed.
-let b:undo_ftplugin = "setlocal commentstring< formatoptions<" .
-		\     " | unlet! b:match_words b:browsefilter"
-
-" Restore the saved compatibility options.
 let &cpo = s:save_cpo
 unlet s:save_cpo

runtime/ftplugin/gprof.vim

@@ -1,6 +1,7 @@
-" Language:    gprof
-" Maintainer:  Dominique Pelle <dominique.pelle@gmail.com>
-" Last Change: 2021 Apr 08
+" Language:     gprof
+" Maintainer:   Dominique Pelle <dominique.pelle@gmail.com>
+" Contributors: Doug Kearns <dougkearns@gmail.com>
+" Last Change:  2021 Sep 19
 
 " When cursor is on one line of the gprof call graph,
 " calling this function jumps to this function in the call graph.
@@ -9,7 +10,7 @@ if exists("b:did_ftplugin")
 endif
 let b:did_ftplugin=1
 
-fun! <SID>GprofJumpToFunctionIndex()
+func! <SID>GprofJumpToFunctionIndex()
   let l:line = getline('.')
   if l:line =~ '[\d\+\]$'
     " We're in a line in the call graph.
@@ -22,11 +23,14 @@ fun! <SID>GprofJumpToFunctionIndex()
     call search('^\[\d\+\].*\d\s\+' .  escape(@", '[]*.') . '\>', 'sW')
     norm! zz
   endif
-endfun
+endfunc
 
-" Pressing <C-]> on a line in the gprof flat profile or in
-" the call graph, jumps to the corresponding function inside
-" the flat profile.
-map <buffer> <silent> <C-]> :call <SID>GprofJumpToFunctionIndex()<CR>
+if !exists("no_plugin_maps") && !exists("no_gprof_maps")
+  " Pressing <C-]> on a line in the gprof flat profile or in
+  " the call graph, jumps to the corresponding function inside
+  " the flat profile.
+  map <buffer> <silent> <C-]> :call <SID>GprofJumpToFunctionIndex()<CR>
+  let b:undo_ftplugin = "silent! unmap <buffer> <C-]>"
+endif
 
 " vim:sw=2 fdm=indent

runtime/ftplugin/man.vim

@@ -2,7 +2,7 @@
 " Language:	man
 " Maintainer:	Jason Franklin <vim@justemail.net>
 " Maintainer:	SungHyun Nam <goweol@gmail.com>
-" Last Change: 	2020 Oct 09
+" Last Change: 	2021 Sep 26
 
 " To make the ":Man" command available before editing a manual page, source
 " this script from your startup vimrc file.

runtime/ftplugin/nginx.vim

@@ -0,0 +1,6 @@
+" Vim filetype plugin
+" Language: nginx.conf
+" Maintainer: Chris Aumann <me@chr4.org>
+" Last Change: Apr 15, 2017
+
+setlocal commentstring=#\ %s

runtime/ftplugin/nsis.vim

@@ -3,7 +3,7 @@
 " Maintainer:		Ken Takata
 " URL:			https://github.com/k-takata/vim-nsis
 " Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
-" Last Change:		2018-01-26
+" Last Change:		2021-10-18
 
 if exists("b:did_ftplugin")
   finish
@@ -15,7 +15,6 @@ set cpo&vim
 let b:did_ftplugin = 1
 
 let b:undo_ftplugin = "setl com< cms< fo< def< inc<"
-      \ " | unlet! b:match_ignorecase b:match_words"
 
 setlocal comments=s1:/*,mb:*,ex:*/,b:#,:; commentstring=;\ %s
 setlocal formatoptions-=t formatoptions+=croql
@@ -37,6 +36,7 @@ if exists("loaded_matchit")
 	\ '\${MementoSection}:\${MementoSectionEnd},' .
 	\ '!if\%(\%(macro\)\?n\?def\)\?\>:!else\>:!endif\>,' .
 	\ '!macro\>:!macroend\>'
+  let b:undo_ftplugin .= " | unlet! b:match_ignorecase b:match_words"
 endif
 
 let &cpo = s:cpo_save

runtime/ftplugin/spec.vim

@@ -18,8 +18,8 @@ if !exists("no_plugin_maps") && !exists("no_spec_maps")
 	endif
 endif
 
-if !hasmapto("call <SID>SpecChangelog(\"\")<CR>")
-       noremap <buffer> <unique> <script> <Plug>SpecChangelog :call <SID>SpecChangelog("")<CR>
+if !hasmapto("call SpecChangelog(\"\")<CR>")
+       noremap <buffer> <unique> <script> <Plug>SpecChangelog :call SpecChangelog("")<CR>
 endif
 
 if !exists("*s:GetRelVer")

runtime/ftplugin/tcsh.vim

@@ -1,19 +1,17 @@
 " Vim filetype plugin file
-" Language:	tcsh
-" Maintainer:	Dan Sharp <dwsharp at users dot sourceforge dot net>
-" Last Changed: 20 Jan 2009
-" URL:		http://dwsharp.users.sourceforge.net/vim/ftplugin
+" Language:		tcsh
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Dan Sharp <dwsharp at users dot sourceforge dot net>
+" Last Change:		2021 Oct 15
 
 if exists("b:did_ftplugin") | finish | endif
 
-" Make sure the continuation lines below do not cause problems in
-" compatibility mode.
 let s:save_cpo = &cpo
 set cpo-=C
 
 " Define some defaults in case the included ftplugins don't set them.
 let s:undo_ftplugin = ""
-let s:browsefilter = "csh Files (*.csh)\t*.csh\n" .
+let s:browsefilter = "csh Files (*.csh)\t*.csh\n" ..
 	    \	     "All Files (*.*)\t*.*\n"
 
 runtime! ftplugin/csh.vim ftplugin/csh_*.vim ftplugin/csh/*.vim
@@ -27,14 +25,11 @@ if exists("b:browsefilter")
     let s:browsefilter = b:browsefilter
 endif
 
-" Change the :browse e filter to primarily show tcsh-related files.
-if has("gui_win32")
-    let  b:browsefilter="tcsh Scripts (*.tcsh)\t*.tcsh\n" . s:browsefilter
+if (has("gui_win32") || has("gui_gtk"))
+    let  b:browsefilter="tcsh Scripts (*.tcsh)\t*.tcsh\n" .. s:browsefilter
 endif
 
-" Undo the stuff we changed.
-let b:undo_ftplugin = "unlet! b:browsefilter | " . s:undo_ftplugin
+let b:undo_ftplugin = "unlet! b:browsefilter | " .. s:undo_ftplugin
 
-" Restore the saved compatibility options.
 let &cpo = s:save_cpo
 unlet s:save_cpo

runtime/ftplugin/tmux.vim

@@ -9,4 +9,7 @@ if exists("b:did_ftplugin")
 endif
 let b:did_ftplugin = 1
 
+let b:undo_ftplugin = "setlocal comments< commentstring<"
+
+setlocal comments=:#
 setlocal commentstring=#\ %s

runtime/ftplugin/toml.vim

@@ -0,0 +1,23 @@
+" Vim filetype plugin
+" Language:    TOML
+" Homepage:    https://github.com/cespare/vim-toml
+" Maintainer:  Aman Verma
+" Author:      Kevin Ballard <kevin@sb.org>
+" Last Change: Sep 21, 2021
+
+if exists('b:did_ftplugin')
+  finish
+endif
+let b:did_ftplugin = 1
+
+let s:save_cpo = &cpo
+set cpo&vim
+let b:undo_ftplugin = 'setlocal commentstring< comments<'
+
+setlocal commentstring=#\ %s
+setlocal comments=:#
+
+let &cpo = s:save_cpo
+unlet s:save_cpo
+
+" vim: et sw=2 sts=2

runtime/indent/cdl.vim

@@ -1,5 +1,6 @@
 " Description:	Comshare Dimension Definition Language (CDL)
-" Author:	Raul Segura Acevedo <raulseguraaceved@netscape.net>
+" Maintainer:	Raul Segura Acevedo <raulseguraaceved@netscape.net> (Invalid email address)
+" 		Doug Kearns <dougkearns@gmail.com>
 " Last Change:	Fri Nov 30 13:35:48  2001 CST
 
 if exists("b:did_indent")

runtime/indent/cobol.vim

@@ -7,6 +7,7 @@
 " Ankit Jain      22.03.2019     Changes & fixes:
 "                                Allow chars in 1st 6 columns
 "                                #C22032019
+" Ankit Jain      24.09.2021     add b:undo_indent (request by tpope)
 
 if exists("b:did_indent")
     finish
@@ -18,6 +19,8 @@ setlocal indentexpr=GetCobolIndent(v:lnum)
 setlocal indentkeys&
 setlocal indentkeys+=0<*>,0/,0$,0=01,=~division,=~section,0=~end,0=~then,0=~else,0=~when,*<Return>,.
 
+let b:undo_indent = "setlocal expandtab< indentexpr< indentkeys<"
+
 " Only define the function once.
 if exists("*GetCobolIndent")
     finish

runtime/indent/config.vim

@@ -1,9 +1,10 @@
 " Vim indent file
-" Language:             Autoconf configure.{ac,in} file
-" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2006-12-20
-" TODO:                 how about nested [()]'s in one line
-"                   what's wrong with '\\\@!'?
+" Language:		Autoconf configure.{ac,in} file
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
+" Last Change:		24 Sep 2021
+
+" TODO: how about nested [()]'s in one line what's wrong with '\\\@!'?
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")
@@ -16,6 +17,8 @@ setlocal indentexpr=GetConfigIndent()
 setlocal indentkeys=!^F,o,O,=then,=do,=else,=elif,=esac,=fi,=fin,=fil,=done
 setlocal nosmartindent
 
+let b:undo_indent = "setl inde< indk< si<"
+
 " Only define the function once.
 if exists("*GetConfigIndent")
   finish

runtime/indent/css.vim

@@ -1,8 +1,10 @@
 " Vim indent file
-" Language:	    CSS
-" Maintainer:	    Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2012-05-30
-"		    Use of shiftwidth() added by Oleg Zubchenko.	
+" Language:		CSS
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
+" Last Change:		24 Sep 2021
+
+" Use of shiftwidth() added by Oleg Zubchenko.
 
 if exists("b:did_indent")
   finish
@@ -13,7 +15,7 @@ setlocal indentexpr=GetCSSIndent()
 setlocal indentkeys=0{,0},!^F,o,O
 setlocal nosmartindent
 
-let b:undo_indent = "setl smartindent< indentkeys< indentexpr<"
+let b:undo_indent = "setl inde< indk< si<"
 
 if exists("*GetCSSIndent")
   finish

runtime/indent/d.vim

@@ -1,7 +1,7 @@
 " Vim indent file for the D programming language (version 0.137).
-"
 " Language:	D
-" Maintainer:	Jason Mills<jmills@cs.mun.ca>
+" Maintainer:	Jason Mills <jmills@cs.mun.ca> (Invalid email address)
+" 		Doug Kearns <dougkearns@gmail.com>
 " Last Change:	2005 Nov 22
 " Version:	0.1
 "

runtime/indent/dosbatch.vim

@@ -2,7 +2,7 @@
 " Language:	MSDOS batch file (with NT command extensions)
 " Maintainer:	Ken Takata
 " URL:		https://github.com/k-takata/vim-dosbatch-indent
-" Last Change:	2017 May 10
+" Last Change:	2021-10-18
 " Filenames:	*.bat
 " License:	VIM License
 
@@ -17,6 +17,8 @@ setlocal indentexpr=GetDosBatchIndent(v:lnum)
 setlocal indentkeys=!^F,o,O
 setlocal indentkeys+=0=)
 
+let b:undo_indent = "setl ai< inde< indk< si<"
+
 if exists("*GetDosBatchIndent")
   finish
 endif

runtime/indent/dtd.vim

@@ -1,12 +1,15 @@
 " Vim indent file
-" Language:    	    DTD (Document Type Definition for XML)
-" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2011-07-08
+" Language:		DTD (Document Type Definition for XML)
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
+" Last Change:		24 Sep 2021
 
 setlocal indentexpr=GetDTDIndent()
 setlocal indentkeys=!^F,o,O,>
 setlocal nosmartindent
 
+let b:undo_indent = "setl inde< indk< si<"
+
 if exists("*GetDTDIndent")
   finish
 endif

runtime/indent/dylan.vim

@@ -1,8 +1,9 @@
 " Vim indent file
 " Language:	Dylan
+" Maintainer:	Brent A. Fulgham <bfulgham@debian.org> (Invalid email address)
+" 		Doug Kearns <dougkearns@gmail.com>
 " Version:	0.01
 " Last Change:	2017 Jun 13
-" Maintainer:	Brent A. Fulgham <bfulgham@debian.org>
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")

runtime/indent/elm.vim

@@ -4,7 +4,7 @@
 " Original Author: Joseph Hager <ajhager@gmail.com>
 " Copyright: Joseph Hager <ajhager@gmail.com>
 " License: BSD3
-" Latest Revision: 2020-05-29
+" Latest Revision: 2021-09-29
 
 " Only load this indent file when no other was loaded.
 if exists('b:did_indent')
@@ -19,6 +19,8 @@ setlocal indentkeys+=0=else,0=if,0=of,0=import,0=then,0=type,0\|,0},0\],0),=-},0
 setlocal nolisp
 setlocal nosmartindent
 
+let b:undo_indent = "setl et< inde< indk< lisp< si<"
+
 " Only define the function once.
 if exists('*GetElmIndent')
 	finish

runtime/indent/eterm.vim

@@ -1,7 +1,8 @@
 " Vim indent file
-" Language:             Eterm configuration file
-" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2006-12-20
+" Language:		Eterm configuration file
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
+" Last Change:		24 Sep 2021
 
 if exists("b:did_indent")
   finish
@@ -12,6 +13,8 @@ setlocal indentexpr=GetEtermIndent()
 setlocal indentkeys=!^F,o,O,=end
 setlocal nosmartindent
 
+let b:undo_indent = "setl inde< indk< si<"
+
 if exists("*GetEtermIndent")
   finish
 endif

runtime/indent/framescript.vim

@@ -1,7 +1,8 @@
 " Vim indent file
-" Language:             FrameScript
-" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2008-07-19
+" Language:		FrameScript
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
+" Last Change:		24 Sep 2021
 
 if exists("b:did_indent")
   finish
@@ -12,6 +13,8 @@ setlocal indentexpr=GetFrameScriptIndent()
 setlocal indentkeys=!^F,o,O,0=~Else,0=~EndIf,0=~EndLoop,0=~EndSub
 setlocal nosmartindent
 
+let b:undo_indent = "setl inde< indk< si<"
+
 if exists("*GetFrameScriptIndent")
   finish
 endif

runtime/indent/hamster.vim

@@ -1,8 +1,14 @@
 " Vim indent file
 " Language:    Hamster Script 
-" Version:     2.0.6.0
-" Last Change: Wed Nov 08 2006 12:02:42 PM
-" Maintainer:  David Fishburn <fishburn@ianywhere.com>
+" Version:     2.0.6.1
+" Last Change: 2021 Oct 11
+" Maintainer:  David Fishburn <dfishburn dot vim at gmail dot com>
+" Download: https://www.vim.org/scripts/script.php?script_id=1099
+"
+"    2.0.6.1 (Oct 2021)
+"        Added b:undo_indent
+"        Added cpo check
+"
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")
@@ -14,12 +20,17 @@ setlocal indentkeys+==~if,=~else,=~endif,=~endfor,=~endwhile
 setlocal indentkeys+==~do,=~until,=~while,=~repeat,=~for,=~loop
 setlocal indentkeys+==~sub,=~endsub
 
+let b:undo_indent = "setl indentkeys<"
+
 " Define the appropriate indent function but only once
 setlocal indentexpr=HamGetFreeIndent()
 if exists("*HamGetFreeIndent")
   finish
 endif
 
+let s:keepcpo = &cpo
+set cpo&vim
+
 function HamGetIndent(lnum)
   let ind = indent(a:lnum)
   let prevline=getline(a:lnum)
@@ -52,4 +63,8 @@ function HamGetFreeIndent()
   return ind
 endfunction
 
+" Restore:
+let &cpo = s:keepcpo
+unlet s:keepcpo
+
 " vim:sw=2 tw=80

runtime/indent/idlang.vim

@@ -1,7 +1,8 @@
 " IDL (Interactive Data Language) indent file.
-" Language: IDL (ft=idlang)
+" Language:	IDL (ft=idlang)
+" Maintainer:	Aleksandar Jelenak <ajelenak AT yahoo.com> (Invalid email address)
+" 		Doug Kearns <dougkearns@gmail.com>
 " Last change:	2017 Jun 13
-" Maintainer: Aleksandar Jelenak <ajelenak AT yahoo.com>
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")

runtime/indent/ld.vim

@@ -1,7 +1,8 @@
 " Vim indent file
-" Language:             ld(1) script
-" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2006-12-20
+" Language:		ld(1) script
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
+" Last Change:		24 Sep 2021
 
 if exists("b:did_indent")
   finish
@@ -12,6 +13,8 @@ setlocal indentexpr=GetLDIndent()
 setlocal indentkeys=0{,0},!^F,o,O
 setlocal nosmartindent
 
+let b:undo_indent = "setl inde< indk< si<"
+
 if exists("*GetLDIndent")
   finish
 endif

runtime/indent/mail.vim

@@ -1,7 +1,7 @@
 " Vim indent file
 " Language:	Mail
 " Maintainer:	Bram Moolenaar
-" Last Change:	2009 Jun 03
+" Last Change:	2021 Sep 26
 
 if exists("b:did_indent")
   finish
@@ -11,3 +11,5 @@ let b:did_indent = 1
 " What works best is auto-indenting, disable other indenting.
 " For formatting see the ftplugin.
 setlocal autoindent nosmartindent nocindent indentexpr=
+
+let b:undo_indent = "setl ai< cin< inde< si<"

runtime/indent/make.vim

@@ -1,7 +1,8 @@
 " Vim indent file
-" Language:             Makefile
-" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2007-05-07
+" Language:		Makefile
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
+" Last Change:		24 Sep 2021
 
 if exists("b:did_indent")
   finish
@@ -12,6 +13,8 @@ setlocal indentexpr=GetMakeIndent()
 setlocal indentkeys=!^F,o,O,<:>,=else,=endif
 setlocal nosmartindent
 
+let b:undo_indent = "setl ai< inde< indk<"
+
 if exists("*GetMakeIndent")
   finish
 endif

runtime/indent/matlab.vim

@@ -2,6 +2,7 @@
 " Language: MATLAB
 " Maintainer: Axel Forsman <axelsfor@gmail.com>
 " Previous maintainer: Christophe Poucet <christophe.poucet@pandora.be>
+" Last Update: 2021-10-01
 
 " Only load if no other indent file is loaded
 if exists('b:did_indent') | finish | endif
@@ -9,6 +10,7 @@ let b:did_indent = 1
 
 setlocal indentexpr=GetMatlabIndent()
 setlocal indentkeys=!,o,O,e,0=end,0=elseif,0=case,0=otherwise,0=catch,0=function,0=elsei
+let b:undo_indent = "setlocal indentexpr< indentkeys<"
 
 " The value of the Function indenting format in
 " MATLAB Editor/Debugger Language Preferences.

runtime/indent/mma.vim

@@ -1,9 +1,10 @@
 " Vim indent file
-" Language:     Mathematica
-" Author:       steve layland <layland@wolfram.com>
-" Last Change:  Sat May  10 18:56:22 CDT 2005
-" Source:       http://vim.sourceforge.net/scripts/script.php?script_id=1274
-"               http://members.wolfram.com/layland/vim/indent/mma.vim
+" Language:	Mathematica
+" Maintainer:	Steve Layland <layland@wolfram.com> (Invalid email address)
+" 		Doug Kearns <dougkearns@gmail.com>
+" Last Change:	Sat May  10 18:56:22 CDT 2005
+" Source:	http://vim.sourceforge.net/scripts/script.php?script_id=1274
+" 		http://members.wolfram.com/layland/vim/indent/mma.vim
 "
 " NOTE:
 " Empty .m files will automatically be presumed to be Matlab files

runtime/indent/nginx.vim

@@ -0,0 +1,17 @@
+" Vim indent file
+" Language: nginx.conf
+" Maintainer: Chris Aumann <me@chr4.org>
+" Last Change: Apr 15, 2017
+
+if exists("b:did_indent")
+    finish
+endif
+let b:did_indent = 1
+
+setlocal indentexpr=
+
+" cindent actually works for nginx' simple file structure
+setlocal cindent
+
+" Just make sure that the comments are not reset as defs would be.
+setlocal cinkeys-=0#

runtime/indent/nsis.vim

@@ -2,7 +2,7 @@
 " Language:		NSIS script
 " Maintainer:		Ken Takata
 " URL:			https://github.com/k-takata/vim-nsis
-" Last Change:		2018-01-21
+" Last Change:		2021-10-18
 " Filenames:		*.nsi
 " License:		VIM License
 
@@ -17,6 +17,8 @@ setlocal indentexpr=GetNsisIndent(v:lnum)
 setlocal indentkeys=!^F,o,O
 setlocal indentkeys+==~${Else,=~${EndIf,=~${EndUnless,=~${AndIf,=~${AndUnless,=~${OrIf,=~${OrUnless,=~${Case,=~${Default,=~${EndSelect,=~${EndSwith,=~${Loop,=~${Next,=~${MementoSectionEnd,=~FunctionEnd,=~SectionEnd,=~SectionGroupEnd,=~PageExEnd,0=~!macroend,0=~!if,0=~!else,0=~!endif
 
+let b:undo_indent = "setl ai< inde< indk< si<"
+
 if exists("*GetNsisIndent")
   finish
 endif

runtime/indent/occam.vim

@@ -1,6 +1,7 @@
 " Vim indent file
 " Language:	occam
-" Maintainer:	Mario Schweigler <ms44@kent.ac.uk>
+" Maintainer:	Mario Schweigler <ms44@kent.ac.uk> (Invalid email address)
+" 		Doug Kearns <dougkearns@gmail.com>
 " Last Change:	23 April 2003
 
 " Only load this indent file when no other was loaded.

runtime/indent/pascal.vim

@@ -2,11 +2,9 @@
 " Language:    Pascal
 " Maintainer:  Neil Carter <n.carter@swansea.ac.uk>
 " Created:     2004 Jul 13
-" Last Change: 2021 Jul 01
+" Last Change: 2021 Sep 22
 "
-" This is version 2.0, a complete rewrite.
-"
-" For further documentation, see http://psy.swansea.ac.uk/staff/carter/vim/
+" For further documentation, see https://psy.swansea.ac.uk/staff/carter/vim/
 
 
 if exists("b:did_indent")
@@ -20,13 +18,14 @@ setlocal indentkeys+==end;,==const,==type,==var,==begin,==repeat,==until,==for
 setlocal indentkeys+==program,==function,==procedure,==object,==private
 setlocal indentkeys+==record,==if,==else,==case
 
-let b:undo_indent = "setl indentkeys< indentexpr<"
+let b:undo_indent = 'setlocal indentexpr< indentkeys<'
 
 if exists("*GetPascalIndent")
 	finish
 endif
 
 
+" ________________________________________________________________
 function! s:GetPrevNonCommentLineNum( line_num )
 
 	" Skip lines starting with a comment
@@ -44,6 +43,7 @@ function! s:GetPrevNonCommentLineNum( line_num )
 endfunction
 
 
+" ________________________________________________________________
 function! s:PurifyCode( line_num )
 	" Strip any trailing comments and whitespace
 	let pureline = 'TODO'
@@ -51,6 +51,7 @@ function! s:PurifyCode( line_num )
 endfunction
 
 
+" ________________________________________________________________
 function! GetPascalIndent( line_num )
 
 	" Line 0 always goes at column 0
@@ -184,7 +185,7 @@ function! GetPascalIndent( line_num )
 	endif
 
 
-" ____________________________________________________________________
+" ________________________________________________________________
 " Object/Borland Pascal/Delphi Extensions
 "
 " Note that extended-pascal is handled here, unless it is simpler to
@@ -222,8 +223,6 @@ function! GetPascalIndent( line_num )
 	endif
 
 
-" ____________________________________________________________________
-
 	" If nothing changed, return same indent.
 	return indnt
 endfunction

runtime/indent/postscr.vim

@@ -1,7 +1,8 @@
 " PostScript indent file
-" Language:    PostScript
-" Maintainer:  Mike Williams <mrw@netcomuk.co.uk>
-" Last Change: 2nd July 2001
+" Language:	PostScript
+" Maintainer:	Mike Williams <mrw@netcomuk.co.uk> (Invalid email address)
+" 		Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2nd July 2001
 "
 
 " Only load this indent file when no other was loaded.

runtime/indent/prolog.vim

@@ -1,7 +1,8 @@
 "  vim: set sw=4 sts=4:
-"  Maintainer	: Gergely Kontra <kgergely@mcl.hu>
-"  Revised on	: 2002.02.18. 23:34:05
-"  Language	: Prolog
+"  Language:	Prolog
+"  Maintainer:	Gergely Kontra <kgergely@mcl.hu> (Invalid email address)
+" 		Doug Kearns <dougkearns@gmail.com>
+"  Revised on:	2002.02.18. 23:34:05
 "  Last change by: Takuya Fujiwara, 2018 Sep 23
 
 " TODO:

runtime/indent/python.vim

@@ -2,7 +2,7 @@
 " Language:		Python
 " Maintainer:		Bram Moolenaar <Bram@vim.org>
 " Original Author:	David Bustos <bustos@caltech.edu>
-" Last Change:		2021 May 26
+" Last Change:		2021 Sep 26
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")
@@ -17,6 +17,8 @@ setlocal autoindent	" indentexpr isn't much help otherwise
 setlocal indentexpr=GetPythonIndent(v:lnum)
 setlocal indentkeys+=<:>,=elif,=except
 
+let b:undo_indent = "setl ai< inde< indk< lisp<"
+
 " Only define the function once.
 if exists("*GetPythonIndent")
   finish

runtime/indent/readline.vim

@@ -1,7 +1,8 @@
 " Vim indent file
-" Language:             readline configuration file
-" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2006-12-20
+" Language:		readline configuration file
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
+" Last Change:		24 Sep 2021
 
 if exists("b:did_indent")
   finish
@@ -12,6 +13,8 @@ setlocal indentexpr=GetReadlineIndent()
 setlocal indentkeys=!^F,o,O,=$else,=$endif
 setlocal nosmartindent
 
+let b:undo_indent = "setl inde< indk< si<"
+
 if exists("*GetReadlineIndent")
   finish
 endif

runtime/indent/sdl.vim

@@ -1,7 +1,7 @@
 " Vim indent file
 " Language:	SDL
 " Maintainer:	Michael Piefel <entwurf@piefel.de>
-" Last Change:	10 December 2011
+" Last Change:	2021 Oct 03
 
 " Shamelessly stolen from the Vim-Script indent file
 
@@ -14,6 +14,8 @@ let b:did_indent = 1
 setlocal indentexpr=GetSDLIndent()
 setlocal indentkeys+==~end,=~state,*<Return>
 
+let b:undo_indent = "setl inde< indk<"
+
 " Only define the function once.
 if exists("*GetSDLIndent")
 "  finish

runtime/indent/sqlanywhere.vim

@@ -1,9 +1,8 @@
 " Vim indent file
 " Language:    SQL
 " Maintainer:  David Fishburn <dfishburn dot vim at gmail dot com>
-" Last Change By Maintainer: 2017 Jun 13
-" Last Change: by Stephen Wall, #5578, 2020 Jun 07
-" Version:     3.0
+" Last Change: 2021 Oct 11
+" Version:     4.0
 " Download:    http://vim.sourceforge.net/script.php?script_id=495
 
 " Notes:
@@ -21,6 +20,9 @@
 "    it, this can leave the indent hanging to the right one too many.
 "
 " History:
+"    4.0 (Oct 2021)
+"        Added b:undo_indent
+"
 "    3.0 (Dec 2012)
 "        Added cpo check
 "
@@ -56,10 +58,13 @@ setlocal indentkeys+==~end,=~else,=~elseif,=~elsif,0=~when,0=)
 " in the indentkeys is typed
 setlocal indentexpr=GetSQLIndent()
 
+let b:undo_indent = "setl indentexpr< indentkeys<"
+
 " Only define the functions once.
 if exists("*GetSQLIndent")
     finish
 endif
+
 let s:keepcpo= &cpo
 set cpo&vim
 
@@ -68,14 +73,9 @@ set cpo&vim
 " IS is excluded, since it is difficult to determine when the
 " ending block is (especially for procedures/functions).
 let s:SQLBlockStart = '^\s*\%('.
-                \ 'if\>.*\<then\|'.
-                \ 'then\|else\>\|'.
-                \ 'elseif\>.*\<then\|'.
-                \ 'elsif\>.(\<then\|'.
-                \ 'while\>.*\<loop\|'.
-                \ 'for\>.*\<loop\|'.
-                \ 'foreach\>.*\<loop\|'. 
-                \ 'loop\|do\|declare\|begin\|'.
+                \ 'if\|else\|elseif\|elsif\|'.
+                \ 'while\|loop\|do\|for\|'.
+                \ 'begin\|'.
                 \ 'case\|when\|merge\|exception'.
                 \ '\)\>'
 let s:SQLBlockEnd = '^\s*\(end\)\>'

runtime/indent/tcl.vim

@@ -1,8 +1,8 @@
 " Vim indent file
-" Language:	    	Tcl
-" Latest Update:  	Chris Heithoff <chrisheithoff@gmail.com>
+" Language:		Tcl
+" Maintainer:		Chris Heithoff <chrisheithoff@gmail.com>
 " Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2018-12-05
+" Last Change:		24 Sep 2021
 
 if exists("b:did_indent")
   finish
@@ -13,6 +13,8 @@ setlocal indentexpr=GetTclIndent()
 setlocal indentkeys=0{,0},!^F,o,O,0]
 setlocal nosmartindent
 
+let b:undo_indent = "setl inde< indk< si<"
+
 if exists("*GetTclIndent")
   finish
 endif

runtime/indent/tcsh.vim

@@ -1,7 +1,8 @@
 " Vim indent file
 " Language:		C-shell (tcsh)
-" Maintainer:		GI <a@b.c>, where a='gi1242+vim', b='gmail', c='com'
-" Last Modified:	Sat 10 Dec 2011 09:23:00 AM EST
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Gautam Iyer <gi1242+vim@NoSpam.com> where NoSpam=gmail (Original Author)
+" Last Change:		2021 Oct 15
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")
@@ -11,7 +12,10 @@ endif
 let b:did_indent = 1
 
 setlocal indentexpr=TcshGetIndent()
-setlocal indentkeys+=e,0=end,0=endsw indentkeys-=0{,0},0),:,0#
+setlocal indentkeys+=e,0=end
+setlocal indentkeys-=0{,0},0),:,0#
+
+let b:undo_indent = "setl inde< indk<"
 
 " Only define the function once.
 if exists("*TcshGetIndent")
@@ -39,9 +43,9 @@ function TcshGetIndent()
 	let ind = ind - shiftwidth()
     endif
 
-    " Subtract indent if current line has on end, endif, case commands
+    " Subtract indent if current line has on end, endif, endsw, case commands
     let line = getline(v:lnum)
-    if line =~ '\v^\s*%(else|end|endif)\s*$'
+    if line =~ '\v^\s*%(else|end|endif|endsw)\s*$'
 	let ind = ind - shiftwidth()
     endif
 

runtime/indent/teraterm.vim

@@ -3,7 +3,7 @@
 "		Based on Tera Term Version 4.100
 " Maintainer:	Ken Takata
 " URL:		https://github.com/k-takata/vim-teraterm
-" Last Change:	2018-08-31
+" Last Change:	2021-10-18
 " Filenames:	*.ttl
 " License:	VIM License
 
@@ -18,6 +18,8 @@ setlocal indentexpr=GetTeraTermIndent(v:lnum)
 setlocal indentkeys=!^F,o,O,e
 setlocal indentkeys+==elseif,=endif,=loop,=next,=enduntil,=endwhile
 
+let b:undo_indent = "setl ai< inde< indk< si<"
+
 if exists("*GetTeraTermIndent")
   finish
 endif

runtime/indent/zimbu.vim

@@ -1,7 +1,7 @@
 " Vim indent file
 " Language:	Zimbu
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2016 Jan 25
+" Last Change:	2021 Sep 26
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")
@@ -16,7 +16,7 @@ setlocal indentkeys=0{,0},!^F,o,O,0=ELSE,0=ELSEIF,0=CASE,0=DEFAULT,0=FINALLY
 " We impose recommended defaults: no Tabs, 'shiftwidth' = 2
 setlocal sw=2 et
 
-let b:undo_indent = "setl et< sw< ai< indentkeys< indentexpr="
+let b:undo_indent = "setl ai< cin< et< indentkeys< indentexpr< lisp< sw<"
 
 " Only define the function once.
 if exists("*GetZimbuIndent")

runtime/optwin.vim

@@ -1,7 +1,7 @@
 " These commands create the option window.
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2020 Oct 27
+" Last Change:	2021 Oct 17
 
 " If there already is an option window, jump to that one.
 let buf = bufnr('option-window')
@@ -652,6 +652,8 @@ if has("gui")
     endif
     call <SID>AddOption("guiheadroom", gettext("room (in pixels) left above/below the window"))
     call append("$", " \tset ghr=" . &ghr)
+    call <SID>AddOption("guiligatures", gettext("list of ASCII characters that can be combined into complesshapes"))
+    call <SID>OptionG("gli", &gli)
   endif
   if has("directx")
     call <SID>AddOption("renderoptions", gettext("options for text rendering"))
@@ -840,6 +842,9 @@ if has("insert_expand")
   call <SID>AddOption("thesaurus", gettext("list of thesaurus files for keyword completion"))
   call append("$", "\t" .. s:global_or_local)
   call <SID>OptionG("tsr", &tsr)
+  call <SID>AddOption("thesaurusfunc", gettext("function used for thesaurus completion"))
+  call append("$", "\t" .. s:global_or_local)
+  call <SID>OptionG("tsrfu", &tsrfu)
 endif
 call <SID>AddOption("infercase", gettext("adjust case of a keyword completion match"))
 call append("$", "\t" .. s:local_to_buffer)

runtime/syntax/8th.vim

@@ -1,6 +1,7 @@
 " Vim syntax file
 " Language:     8th
-" Version:      19.01d
+" Version:      21.08
+" Last Change:  2021 Sep 20
 " Maintainer:   Ron Aaron <ron@aaron-tech.com>
 " URL:          https://8th-dev.com/
 " Filetypes:    *.8th
@@ -30,246 +31,318 @@ syn match eighthClassWord "\<\S\+:.\+" contains=eighthClasses
 syn keyword eighthEndOfColonDef ; i;
 syn keyword eighthDefine var var,
 
-" Built in words
+" Built in words:
 com! -nargs=+ Builtin syn keyword eighthBuiltin <args>
-"Builtin ^ < <# <#> = > - -- ,# ; ;; !  ???  / .  .# ' () @ * */ \ 
 
-Builtin  ! G:! #! G:#! ## G:## #> G:#> #if G:#if ' G:' ( G:( (* G:(* (:) G:(:) (code) G:(code) (getc) G:(getc)
-Builtin  (gets) G:(gets) (interp) G:(interp) (needs) G:(needs) (putc) G:(putc) (puts) G:(puts) (putslim) G:(putslim)
-Builtin  (say) G:(say) (stat) G:(stat) ) G:) +listener G:+listener +ref G:+ref ,# G:,# -- G:-- -----BEGIN G:-----BEGIN
-Builtin  -Inf G:-Inf -Inf? G:-Inf? -listener G:-listener -ref G:-ref -rot G:-rot . G:. .# G:.# .needs G:.needs
-Builtin  .r G:.r .s G:.s .stats G:.stats .ver G:.ver .with G:.with 0; G:0; 2dip G:2dip 2drop G:2drop
-Builtin  2dup G:2dup 2over G:2over 2swap G:2swap 3drop G:3drop 4drop G:4drop 8thdt? G:8thdt? 8thver? G:8thver?
-Builtin  : G:: ; G:; ;; G:;; ;;; G:;;; ;then G:;then ;with G:;with <# G:<# <#> G:<#> >clip G:>clip >json G:>json
-Builtin  >kind G:>kind >n G:>n >r G:>r >s G:>s ?: G:?: ??? G:??? @ G:@ Inf G:Inf Inf? G:Inf? NaN G:NaN
-Builtin  NaN? G:NaN? SED-CHECK G:SED-CHECK SED: G:SED: SED: G:SED: \ G:\ ` G:` `` G:`` actor: G:actor:
-Builtin  again G:again ahead G:ahead and G:and appname G:appname apropos G:apropos argc G:argc args G:args
-Builtin  array? G:array? assert G:assert base G:base bi G:bi bits G:bits break G:break break? G:break?
-Builtin  build? G:build? buildver? G:buildver? bye G:bye c# G:c# c/does G:c/does case G:case caseof G:caseof
-Builtin  chdir G:chdir clip> G:clip> clone G:clone clone-shallow G:clone-shallow cold G:cold compat-level G:compat-level
-Builtin  compile G:compile compile? G:compile? conflict G:conflict const G:const container? G:container?
-Builtin  cr G:cr curlang G:curlang curry G:curry curry: G:curry: decimal G:decimal defer: G:defer: deg>rad G:deg>rad
-Builtin  depth G:depth die G:die dip G:dip drop G:drop dstack G:dstack dump G:dump dup G:dup dup? G:dup?
-Builtin  else G:else enum: G:enum: eval G:eval eval! G:eval! eval0 G:eval0 execnull G:execnull expect G:expect
-Builtin  extra! G:extra! extra@ G:extra@ false G:false fnv G:fnv fourth G:fourth free G:free func: G:func:
-Builtin  getc G:getc getcwd G:getcwd getenv G:getenv gets G:gets handler G:handler header G:header help G:help
-Builtin  hex G:hex i: G:i: i; G:i; if G:if if; G:if; isa? G:isa? items-used G:items-used jcall G:jcall
-Builtin  jclass G:jclass jmethod G:jmethod json-nesting G:json-nesting json-pretty G:json-pretty json-throw G:json-throw
-Builtin  json> G:json> k32 G:k32 keep G:keep l: G:l: last G:last lib G:lib libbin G:libbin libc G:libc
+Builtin  args #:args b #:b dhm #:dhm exec# #:exec# id2ns #:id2ns id? #:id? idd #:idd key #:key oa #:oa
+Builtin  oid #:oid okey #:okey with #:with with! #:with! zip #:zip gen-secret 2fa:gen-secret gen-url 2fa:gen-url
+Builtin  validate-code 2fa:validate-code ! G:! #! G:#! ## G:## #> G:#> #if G:#if ' G:' ( G:( (* G:(*
+Builtin  (:) G:(:) (code) G:(code) (defer) G:(defer) (dump) G:(dump) (getc) G:(getc) (gets) G:(gets)
+Builtin  (interp) G:(interp) (log) G:(log) (needs) G:(needs) (parseln) G:(parseln) (putc) G:(putc) (puts) G:(puts)
+Builtin  (putslim) G:(putslim) (stat) G:(stat) (with) G:(with) ) G:) +hook G:+hook +listener G:+listener
+Builtin  +ref G:+ref ,# G:,# -- G:-- -----BEGIN G:-----BEGIN -Inf G:-Inf -Inf? G:-Inf? -hook G:-hook
+Builtin  -listener G:-listener -ref G:-ref -rot G:-rot . G:. .# G:.# .hook G:.hook .needs G:.needs .r G:.r
+Builtin  .s G:.s .s-truncate G:.s-truncate .stats G:.stats .ver G:.ver .with G:.with 0; G:0; 2dip G:2dip
+Builtin  2drop G:2drop 2dup G:2dup 2over G:2over 2swap G:2swap 3drop G:3drop 3rev G:3rev 4drop G:4drop
+Builtin  8thdt? G:8thdt? 8thsku G:8thsku 8thver? G:8thver? 8thvernum? G:8thvernum? : G:: ; G:; ;; G:;;
+Builtin  ;;; G:;;; ;with G:;with <# G:<# <#> G:<#> >clip G:>clip >json G:>json >kind G:>kind >n G:>n
+Builtin  >r G:>r >s G:>s ?: G:?: @ G:@ BITMAP: G:BITMAP: ENUM: G:ENUM: FLAG: G:FLAG: Inf G:Inf Inf? G:Inf?
+Builtin  NaN G:NaN NaN? G:NaN? SED-CHECK G:SED-CHECK SED: G:SED: SED: G:SED: \ G:\ _dup G:_dup _swap G:_swap
+Builtin  actor: G:actor: again G:again ahead G:ahead and G:and appname G:appname apropos G:apropos argc G:argc
+Builtin  args G:args array? G:array? assert G:assert base G:base bi G:bi bits G:bits break G:break break? G:break?
+Builtin  breakif G:breakif build? G:build? buildver? G:buildver? bye G:bye c# G:c# c/does G:c/does case: G:case:
+Builtin  catch G:catch chdir G:chdir clip> G:clip> clone G:clone clone-shallow G:clone-shallow cold G:cold
+Builtin  compile G:compile compile? G:compile? compiling? G:compiling? conflict G:conflict const G:const
+Builtin  container? G:container? counting-allocations G:counting-allocations cr G:cr curlang G:curlang
+Builtin  curry G:curry curry: G:curry: decimal G:decimal default: G:default: defer: G:defer: deferred: G:deferred:
+Builtin  deg>rad G:deg>rad depth G:depth die G:die dip G:dip drop G:drop dstack G:dstack dump G:dump
+Builtin  dup G:dup dup>r G:dup>r dup? G:dup? e# G:e# enum: G:enum: error? G:error? eval G:eval eval! G:eval!
+Builtin  eval0 G:eval0 execnull G:execnull expect G:expect extra! G:extra! extra@ G:extra@ false G:false
+Builtin  fnv G:fnv fourth G:fourth free G:free func: G:func: getc G:getc getcwd G:getcwd getenv G:getenv
+Builtin  gets G:gets handler G:handler header G:header help G:help hex G:hex i: G:i: i; G:i; isa? G:isa?
+Builtin  items-used G:items-used jcall G:jcall jclass G:jclass jmethod G:jmethod json! G:json! json-8th> G:json-8th>
+Builtin  json-nesting G:json-nesting json-pretty G:json-pretty json-throw G:json-throw json> G:json>
+Builtin  json@ G:json@ k32 G:k32 keep G:keep l: G:l: last G:last lib G:lib libbin G:libbin libc G:libc
 Builtin  listener@ G:listener@ literal G:literal locals: G:locals: lock G:lock lock-to G:lock-to locked? G:locked?
-Builtin  log G:log log-async G:log-async log-task G:log-task log-time G:log-time log-time-local G:log-time-local
-Builtin  long-days G:long-days long-months G:long-months loop G:loop loop- G:loop- map? G:map? mark G:mark
-Builtin  mark? G:mark? memfree G:memfree mobile? G:mobile? n# G:n# name>os G:name>os name>sem G:name>sem
-Builtin  ndrop G:ndrop needs G:needs new G:new next-arg G:next-arg nip G:nip noop G:noop not G:not ns G:ns
-Builtin  ns: G:ns: ns>ls G:ns>ls ns>s G:ns>s ns? G:ns? null G:null null; G:null; null? G:null? number? G:number?
-Builtin  off G:off on G:on onexit G:onexit only G:only op! G:op! or G:or os G:os os-names G:os-names
-Builtin  os>long-name G:os>long-name os>name G:os>name over G:over p: G:p: pack G:pack parse G:parse
-Builtin  parsech G:parsech parseln G:parseln parsews G:parsews pick G:pick poke G:poke pool-clear G:pool-clear
-Builtin  prior G:prior private G:private process-args G:process-args prompt G:prompt public G:public
-Builtin  putc G:putc puts G:puts putslim G:putslim quote G:quote r! G:r! r> G:r> r@ G:r@ rad>deg G:rad>deg
-Builtin  rand G:rand rand-pcg G:rand-pcg rand-pcg-seed G:rand-pcg-seed randbuf G:randbuf randbuf-pcg G:randbuf-pcg
-Builtin  rdrop G:rdrop recurse G:recurse recurse-stack G:recurse-stack ref@ G:ref@ reg! G:reg! reg@ G:reg@
-Builtin  regbin@ G:regbin@ remaining-args G:remaining-args repeat G:repeat reset G:reset roll G:roll
-Builtin  rop! G:rop! rot G:rot rpick G:rpick rroll G:rroll rstack G:rstack rswap G:rswap rusage G:rusage
-Builtin  s>ns G:s>ns same? G:same? scriptdir G:scriptdir scriptfile G:scriptfile sem G:sem sem-post G:sem-post
-Builtin  sem-rm G:sem-rm sem-wait G:sem-wait sem-wait? G:sem-wait? sem>name G:sem>name semi-throw G:semi-throw
-Builtin  set-wipe G:set-wipe setenv G:setenv settings! G:settings! settings![] G:settings![] settings@ G:settings@
-Builtin  settings@? G:settings@? settings@[] G:settings@[] sh G:sh sh$ G:sh$ short-days G:short-days
-Builtin  short-months G:short-months sleep G:sleep space G:space stack-check G:stack-check stack-size G:stack-size
-Builtin  step G:step string? G:string? struct: G:struct: swap G:swap syslang G:syslang sysregion G:sysregion
+Builtin  log G:log log-syslog G:log-syslog log-task G:log-task log-time G:log-time log-time-local G:log-time-local
+Builtin  long-days G:long-days long-months G:long-months longjmp G:longjmp lookup G:lookup loop G:loop
+Builtin  loop- G:loop- map? G:map? mark G:mark mark? G:mark? memfree G:memfree mobile? G:mobile? n# G:n#
+Builtin  name>os G:name>os name>sem G:name>sem ndrop G:ndrop needs G:needs new G:new next-arg G:next-arg
+Builtin  nip G:nip noop G:noop not G:not nothrow G:nothrow ns G:ns ns: G:ns: ns>ls G:ns>ls ns>s G:ns>s
+Builtin  ns? G:ns? null G:null null; G:null; null? G:null? number? G:number? of: G:of: off G:off on G:on
+Builtin  onexit G:onexit only G:only op! G:op! or G:or os G:os os-names G:os-names os>long-name G:os>long-name
+Builtin  os>name G:os>name over G:over p: G:p: pack G:pack parse G:parse parse-csv G:parse-csv parsech G:parsech
+Builtin  parseln G:parseln parsews G:parsews pick G:pick poke G:poke pool-clear G:pool-clear pool-clear-all G:pool-clear-all
+Builtin  prior G:prior private G:private process-args G:process-args process-args-fancy G:process-args-fancy
+Builtin  process-args-help G:process-args-help process-args-vars G:process-args-vars prompt G:prompt
+Builtin  public G:public putc G:putc puts G:puts putslim G:putslim quote G:quote r! G:r! r> G:r> r@ G:r@
+Builtin  rad>deg G:rad>deg rand-jit G:rand-jit rand-jsf G:rand-jsf rand-native G:rand-native rand-normal G:rand-normal
+Builtin  rand-pcg G:rand-pcg rand-pcg-seed G:rand-pcg-seed rand-range G:rand-range rand-select G:rand-select
+Builtin  randbuf-pcg G:randbuf-pcg random G:random rdrop G:rdrop recurse G:recurse recurse-stack G:recurse-stack
+Builtin  ref@ G:ref@ reg! G:reg! reg@ G:reg@ regbin@ G:regbin@ remaining-args G:remaining-args repeat G:repeat
+Builtin  required? G:required? requires G:requires reset G:reset roll G:roll rop! G:rop! rot G:rot rpick G:rpick
+Builtin  rroll G:rroll rstack G:rstack rswap G:rswap rusage G:rusage s>ns G:s>ns same? G:same? scriptdir G:scriptdir
+Builtin  scriptfile G:scriptfile sem G:sem sem-post G:sem-post sem-rm G:sem-rm sem-wait G:sem-wait sem-wait? G:sem-wait?
+Builtin  sem>name G:sem>name semi-throw G:semi-throw set-wipe G:set-wipe setenv G:setenv setjmp G:setjmp
+Builtin  settings! G:settings! settings![] G:settings![] settings@ G:settings@ settings@? G:settings@?
+Builtin  settings@[] G:settings@[] sh G:sh sh$ G:sh$ short-days G:short-days short-months G:short-months
+Builtin  sleep G:sleep sleep-until G:sleep-until slog G:slog space G:space stack-check G:stack-check
+Builtin  stack-size G:stack-size step G:step sthrow G:sthrow string? G:string? struct: G:struct: swap G:swap
 Builtin  tab-hook G:tab-hook tell-conflict G:tell-conflict tempdir G:tempdir tempfilename G:tempfilename
-Builtin  then G:then third G:third throw G:throw thrownull G:thrownull times G:times tlog G:tlog tri G:tri
-Builtin  true G:true tuck G:tuck type-check G:type-check typeassert G:typeassert unlock G:unlock unpack G:unpack
-Builtin  until G:until until! G:until! var G:var var, G:var, while G:while while! G:while! with: G:with:
+Builtin  third G:third throw G:throw thrownull G:thrownull times G:times tlog G:tlog tri G:tri true G:true
+Builtin  tuck G:tuck type-check G:type-check typeassert G:typeassert uid G:uid uname G:uname unlock G:unlock
+Builtin  unpack G:unpack until G:until until! G:until! while G:while while! G:while! with: G:with: word? G:word?
 Builtin  words G:words words-like G:words-like words/ G:words/ xchg G:xchg xor G:xor >auth HTTP:>auth
-Builtin  sh I:sh tpush I:tpush trace-word I:trace-word call JSONRPC:call auth-string OAuth:auth-string
-Builtin  gen-nonce OAuth:gen-nonce params OAuth:params call SOAP:call ! a:! + a:+ - a:- 2each a:2each
-Builtin  2map a:2map 2map+ a:2map+ 2map= a:2map= = a:= >map a:>map @ a:@ @@ a:@@ bsearch a:bsearch clear a:clear
-Builtin  close a:close diff a:diff dot a:dot each a:each each-slice a:each-slice exists? a:exists? filter a:filter
-Builtin  generate a:generate group a:group indexof a:indexof insert a:insert intersect a:intersect join a:join
-Builtin  len a:len map a:map map+ a:map+ map= a:map= mean a:mean mean&variance a:mean&variance new a:new
-Builtin  op a:op op! a:op! op= a:op= open a:open pop a:pop push a:push qsort a:qsort randeach a:randeach
-Builtin  reduce a:reduce reduce+ a:reduce+ rev a:rev shift a:shift shuffle a:shuffle slice a:slice slice+ a:slice+
-Builtin  slide a:slide sort a:sort union a:union when a:when when! a:when! x a:x x-each a:x-each xchg a:xchg
-Builtin  y a:y zip a:zip 8thdir app:8thdir asset app:asset atrun app:atrun atrun app:atrun atrun app:atrun
-Builtin  basedir app:basedir current app:current datadir app:datadir exename app:exename isgui app:isgui
-Builtin  main app:main oncrash app:oncrash orientation app:orientation pid app:pid restart app:restart
-Builtin  resumed app:resumed shared? app:shared? standalone app:standalone subdir app:subdir suspended app:suspended
-Builtin  sysquit app:sysquit (here) asm:(here) >n asm:>n avail asm:avail c, asm:c, here! asm:here! n> asm:n>
-Builtin  used asm:used w, asm:w, ! b:! + b:+ / b:/ = b:= >base64 b:>base64 >hex b:>hex >mpack b:>mpack
-Builtin  @ b:@ append b:append base64> b:base64> bit! b:bit! bit@ b:bit@ clear b:clear compress b:compress
-Builtin  conv b:conv each b:each each-slice b:each-slice expand b:expand fill b:fill getb b:getb hex> b:hex>
-Builtin  len b:len mem> b:mem> move b:move mpack-date b:mpack-date mpack-ignore b:mpack-ignore mpack> b:mpack>
-Builtin  new b:new op b:op rev b:rev search b:search shmem b:shmem slice b:slice splice b:splice ungetb b:ungetb
-Builtin  writable b:writable xor b:xor +block bc:+block .blocks bc:.blocks add-block bc:add-block block-hash bc:block-hash
+Builtin  (curry) I:(curry) notimpl I:notimpl sh I:sh trace-word I:trace-word call JSONRPC:call auth-string OAuth:auth-string
+Builtin  gen-nonce OAuth:gen-nonce params OAuth:params call SOAP:call ! a:! + a:+ - a:- / a:/ 2each a:2each
+Builtin  2map a:2map 2map+ a:2map+ 2map= a:2map= = a:= @ a:@ @? a:@? _@ a:_@ all a:all any a:any bsearch a:bsearch
+Builtin  centroid a:centroid clear a:clear close a:close diff a:diff dot a:dot each a:each each! a:each!
+Builtin  each-slice a:each-slice exists? a:exists? filter a:filter generate a:generate group a:group
+Builtin  indexof a:indexof insert a:insert intersect a:intersect join a:join len a:len map a:map map+ a:map+
+Builtin  map= a:map= mean a:mean mean&variance a:mean&variance merge a:merge new a:new op! a:op! open a:open
+Builtin  pop a:pop push a:push qsort a:qsort randeach a:randeach reduce a:reduce reduce+ a:reduce+ remove a:remove
+Builtin  rev a:rev shift a:shift shuffle a:shuffle slice a:slice slice+ a:slice+ slide a:slide smear a:smear
+Builtin  sort a:sort union a:union x a:x x-each a:x-each xchg a:xchg y a:y zip a:zip 8thdir app:8thdir
+Builtin  asset app:asset atrun app:atrun atrun app:atrun atrun app:atrun basedir app:basedir current app:current
+Builtin  datadir app:datadir exename app:exename lowmem app:lowmem main app:main name app:name oncrash app:oncrash
+Builtin  opts! app:opts! opts@ app:opts@ orientation app:orientation orientation! app:orientation! pid app:pid
+Builtin  post-main app:post-main pre-main app:pre-main raise app:raise request-perm app:request-perm
+Builtin  restart app:restart resumed app:resumed signal app:signal standalone app:standalone subdir app:subdir
+Builtin  suspended app:suspended sysquit app:sysquit terminated app:terminated trap app:trap (here) asm:(here)
+Builtin  >n asm:>n avail asm:avail c, asm:c, here! asm:here! n> asm:n> used asm:used w, asm:w, ! b:!
+Builtin  + b:+ / b:/ 1+ b:1+ 1- b:1- = b:= >base16 b:>base16 >base32 b:>base32 >base64 b:>base64 >base85 b:>base85
+Builtin  >hex b:>hex >mpack b:>mpack @ b:@ append b:append base16> b:base16> base32> b:base32> base64> b:base64>
+Builtin  base85> b:base85> bit! b:bit! bit@ b:bit@ clear b:clear compress b:compress conv b:conv each b:each
+Builtin  each! b:each! each-slice b:each-slice expand b:expand fill b:fill getb b:getb hex> b:hex> len b:len
+Builtin  mem> b:mem> move b:move mpack-compat b:mpack-compat mpack-date b:mpack-date mpack-ignore b:mpack-ignore
+Builtin  mpack> b:mpack> n! b:n! n+ b:n+ n@ b:n@ new b:new op b:op pad b:pad rev b:rev search b:search
+Builtin  shmem b:shmem slice b:slice splice b:splice ungetb b:ungetb unpad b:unpad writable b:writable
+Builtin  xor b:xor +block bc:+block .blocks bc:.blocks add-block bc:add-block block-hash bc:block-hash
 Builtin  block@ bc:block@ first-block bc:first-block hash bc:hash last-block bc:last-block load bc:load
 Builtin  new bc:new save bc:save set-sql bc:set-sql validate bc:validate validate-block bc:validate-block
 Builtin  add bloom:add filter bloom:filter in? bloom:in? accept bt:accept ch! bt:ch! ch@ bt:ch@ connect bt:connect
-Builtin  disconnect bt:disconnect err? bt:err? leconnect bt:leconnect lescan bt:lescan listen bt:listen
+Builtin  disconnect bt:disconnect init bt:init leconnect bt:leconnect lescan bt:lescan listen bt:listen
 Builtin  on? bt:on? read bt:read scan bt:scan service? bt:service? services? bt:services? write bt:write
 Builtin  * c:* * c:* + c:+ + c:+ = c:= = c:= >ri c:>ri >ri c:>ri abs c:abs abs c:abs arg c:arg arg c:arg
-Builtin  conj c:conj conj c:conj im c:im n> c:n> new c:new new c:new re c:re >aes128gcm cr:>aes128gcm
-Builtin  >aes256gcm cr:>aes256gcm >cp cr:>cp >cpe cr:>cpe >decrypt cr:>decrypt >edbox cr:>edbox >encrypt cr:>encrypt
-Builtin  >nbuf cr:>nbuf >rsabox cr:>rsabox >uuid cr:>uuid CBC cr:CBC CFB cr:CFB CTR cr:CTR ECB cr:ECB
-Builtin  GCM cr:GCM OFB cr:OFB aad? cr:aad? aes128box-sig cr:aes128box-sig aes128gcm> cr:aes128gcm>
-Builtin  aes256box-sig cr:aes256box-sig aes256gcm> cr:aes256gcm> aesgcm cr:aesgcm blakehash cr:blakehash
-Builtin  chacha20box-sig cr:chacha20box-sig chachapoly cr:chachapoly cipher! cr:cipher! cipher@ cr:cipher@
-Builtin  cp> cr:cp> cpe> cr:cpe> decrypt cr:decrypt decrypt+ cr:decrypt+ decrypt> cr:decrypt> dh-genkey cr:dh-genkey
-Builtin  dh-secret cr:dh-secret dh-sign cr:dh-sign dh-verify cr:dh-verify ebox-sig cr:ebox-sig ecc-genkey cr:ecc-genkey
-Builtin  ecc-secret cr:ecc-secret ecc-sign cr:ecc-sign ecc-verify cr:ecc-verify edbox-sig cr:edbox-sig
-Builtin  edbox> cr:edbox> encrypt cr:encrypt encrypt+ cr:encrypt+ encrypt> cr:encrypt> ensurekey cr:ensurekey
-Builtin  err? cr:err? gcm-tag-size cr:gcm-tag-size genkey cr:genkey hash cr:hash hash! cr:hash! hash+ cr:hash+
-Builtin  hash>b cr:hash>b hash>s cr:hash>s hash@ cr:hash@ hmac cr:hmac hotp cr:hotp iv? cr:iv? mode cr:mode
-Builtin  mode@ cr:mode@ randkey cr:randkey restore cr:restore root-certs cr:root-certs rsa_decrypt cr:rsa_decrypt
-Builtin  rsa_encrypt cr:rsa_encrypt rsa_sign cr:rsa_sign rsa_verify cr:rsa_verify rsabox-sig cr:rsabox-sig
-Builtin  rsabox> cr:rsabox> rsagenkey cr:rsagenkey save cr:save sbox-sig cr:sbox-sig sha1-hmac cr:sha1-hmac
-Builtin  shard cr:shard tag? cr:tag? totp cr:totp totp-epoch cr:totp-epoch totp-time-step cr:totp-time-step
-Builtin  unshard cr:unshard uuid cr:uuid uuid> cr:uuid> validate-pgp-sig cr:validate-pgp-sig (.hebrew) d:(.hebrew)
-Builtin  (.islamic) d:(.islamic) + d:+ +day d:+day +hour d:+hour +min d:+min +msec d:+msec - d:- .hebrew d:.hebrew
-Builtin  .islamic d:.islamic .time d:.time / d:/ = d:= >fixed d:>fixed >hebepoch d:>hebepoch >msec d:>msec
-Builtin  >unix d:>unix >ymd d:>ymd Adar d:Adar Adar2 d:Adar2 Adar2 d:Adar2 Av d:Av Elul d:Elul Fri d:Fri
-Builtin  Heshvan d:Heshvan Iyar d:Iyar Kislev d:Kislev Mon d:Mon Nissan d:Nissan Sat d:Sat Shevat d:Shevat
-Builtin  Sivan d:Sivan Sun d:Sun Tammuz d:Tammuz Tevet d:Tevet Thu d:Thu Tishrei d:Tishrei Tue d:Tue
-Builtin  Wed d:Wed adjust-dst d:adjust-dst between d:between d. d:d. dawn d:dawn days-in-hebrew-year d:days-in-hebrew-year
-Builtin  displaying-hebrew d:displaying-hebrew do-dawn d:do-dawn do-dusk d:do-dusk do-rise d:do-rise
-Builtin  doy d:doy dst? d:dst? dstquery d:dstquery dstzones? d:dstzones? dusk d:dusk elapsed-timer d:elapsed-timer
-Builtin  elapsed-timer-seconds d:elapsed-timer-seconds first-dow d:first-dow fixed> d:fixed> fixed>dow d:fixed>dow
-Builtin  fixed>hebrew d:fixed>hebrew fixed>islamic d:fixed>islamic format d:format hanukkah d:hanukkah
-Builtin  hebrew-epoch d:hebrew-epoch hebrew>fixed d:hebrew>fixed hebrewtoday d:hebrewtoday hmonth-name d:hmonth-name
-Builtin  islamic.epoch d:islamic.epoch islamic>fixed d:islamic>fixed islamictoday d:islamictoday join d:join
-Builtin  last-day-of-hebrew-month d:last-day-of-hebrew-month last-dow d:last-dow last-month d:last-month
-Builtin  last-week d:last-week last-year d:last-year latitude d:latitude longitude d:longitude longitude d:longitude
-Builtin  msec d:msec msec> d:msec> new d:new next-dow d:next-dow next-month d:next-month next-week d:next-week
-Builtin  next-year d:next-year number>hebrew d:number>hebrew omer d:omer parse d:parse pesach d:pesach
+Builtin  conj c:conj conj c:conj im c:im n> c:n> new c:new new c:new re c:re >redir con:>redir accept con:accept
+Builtin  accept-pwd con:accept-pwd ansi? con:ansi? black con:black blue con:blue clreol con:clreol cls con:cls
+Builtin  cyan con:cyan down con:down free con:free getxy con:getxy gotoxy con:gotoxy green con:green
+Builtin  key con:key key? con:key? left con:left load-history con:load-history magenta con:magenta onBlack con:onBlack
+Builtin  onBlue con:onBlue onCyan con:onCyan onGreen con:onGreen onMagenta con:onMagenta onRed con:onRed
+Builtin  onWhite con:onWhite onYellow con:onYellow print con:print red con:red redir> con:redir> redir? con:redir?
+Builtin  right con:right save-history con:save-history size? con:size? up con:up white con:white yellow con:yellow
+Builtin  >aes128gcm cr:>aes128gcm >aes256gcm cr:>aes256gcm >cp cr:>cp >cpe cr:>cpe >decrypt cr:>decrypt
+Builtin  >edbox cr:>edbox >encrypt cr:>encrypt >nbuf cr:>nbuf >rsabox cr:>rsabox >uuid cr:>uuid CBC cr:CBC
+Builtin  CFB cr:CFB CTR cr:CTR ECB cr:ECB GCM cr:GCM OFB cr:OFB aad? cr:aad? aes128box-sig cr:aes128box-sig
+Builtin  aes128gcm> cr:aes128gcm> aes256box-sig cr:aes256box-sig aes256gcm> cr:aes256gcm> aesgcm cr:aesgcm
+Builtin  blakehash cr:blakehash chacha20box-sig cr:chacha20box-sig chachapoly cr:chachapoly cipher! cr:cipher!
+Builtin  cipher@ cr:cipher@ cp> cr:cp> cpe> cr:cpe> decrypt cr:decrypt decrypt+ cr:decrypt+ decrypt> cr:decrypt>
+Builtin  dh-genkey cr:dh-genkey dh-secret cr:dh-secret dh-sign cr:dh-sign dh-verify cr:dh-verify ebox-sig cr:ebox-sig
+Builtin  ecc-genkey cr:ecc-genkey ecc-secret cr:ecc-secret ecc-sign cr:ecc-sign ecc-verify cr:ecc-verify
+Builtin  edbox-sig cr:edbox-sig edbox> cr:edbox> encrypt cr:encrypt encrypt+ cr:encrypt+ encrypt> cr:encrypt>
+Builtin  ensurekey cr:ensurekey gcm-tag-size cr:gcm-tag-size genkey cr:genkey hash cr:hash hash! cr:hash!
+Builtin  hash+ cr:hash+ hash>b cr:hash>b hash>s cr:hash>s hash@ cr:hash@ hmac cr:hmac hotp cr:hotp iv? cr:iv?
+Builtin  mode cr:mode mode@ cr:mode@ rand cr:rand randbuf cr:randbuf randkey cr:randkey restore cr:restore
+Builtin  root-certs cr:root-certs rsa_decrypt cr:rsa_decrypt rsa_encrypt cr:rsa_encrypt rsa_sign cr:rsa_sign
+Builtin  rsa_verify cr:rsa_verify rsabox-sig cr:rsabox-sig rsabox> cr:rsabox> rsagenkey cr:rsagenkey
+Builtin  save cr:save sbox-sig cr:sbox-sig sha1-hmac cr:sha1-hmac shard cr:shard tag? cr:tag? totp cr:totp
+Builtin  totp-epoch cr:totp-epoch totp-time-step cr:totp-time-step unshard cr:unshard uuid cr:uuid uuid> cr:uuid>
+Builtin  validate-pgp-sig cr:validate-pgp-sig (.hebrew) d:(.hebrew) (.islamic) d:(.islamic) + d:+ +day d:+day
+Builtin  +hour d:+hour +min d:+min +msec d:+msec - d:- .hebrew d:.hebrew .islamic d:.islamic .time d:.time
+Builtin  / d:/ = d:= >fixed d:>fixed >hebepoch d:>hebepoch >jdn d:>jdn >msec d:>msec >unix d:>unix >ymd d:>ymd
+Builtin  ?= d:?= Adar d:Adar Adar2 d:Adar2 Adar2 d:Adar2 Av d:Av Elul d:Elul Fri d:Fri Heshvan d:Heshvan
+Builtin  Iyar d:Iyar Kislev d:Kislev Mon d:Mon Nissan d:Nissan Sat d:Sat Shevat d:Shevat Sivan d:Sivan
+Builtin  Sun d:Sun Tammuz d:Tammuz Tevet d:Tevet Thu d:Thu Tishrei d:Tishrei Tue d:Tue Wed d:Wed adjust-dst d:adjust-dst
+Builtin  approx! d:approx! approx? d:approx? approximates! d:approximates! between d:between d. d:d.
+Builtin  dawn d:dawn days-in-hebrew-year d:days-in-hebrew-year displaying-hebrew d:displaying-hebrew
+Builtin  do-dawn d:do-dawn do-dusk d:do-dusk do-rise d:do-rise doy d:doy dst? d:dst? dstquery d:dstquery
+Builtin  dstzones? d:dstzones? dusk d:dusk elapsed-timer d:elapsed-timer elapsed-timer-seconds d:elapsed-timer-seconds
+Builtin  first-dow d:first-dow fixed> d:fixed> fixed>dow d:fixed>dow fixed>hebrew d:fixed>hebrew fixed>islamic d:fixed>islamic
+Builtin  format d:format hanukkah d:hanukkah hebrew-epoch d:hebrew-epoch hebrew>fixed d:hebrew>fixed
+Builtin  hebrewtoday d:hebrewtoday hmonth-name d:hmonth-name islamic.epoch d:islamic.epoch islamic>fixed d:islamic>fixed
+Builtin  islamictoday d:islamictoday jdn> d:jdn> join d:join last-day-of-hebrew-month d:last-day-of-hebrew-month
+Builtin  last-dow d:last-dow last-month d:last-month last-week d:last-week last-year d:last-year latitude d:latitude
+Builtin  longitude d:longitude longitude d:longitude msec d:msec msec> d:msec> new d:new next-dow d:next-dow
+Builtin  next-month d:next-month next-week d:next-week next-year d:next-year number>hebrew d:number>hebrew
+Builtin  omer d:omer parse d:parse parse-approx d:parse-approx parse-range d:parse-range pesach d:pesach
 Builtin  prev-dow d:prev-dow purim d:purim rosh-chodesh? d:rosh-chodesh? rosh-hashanah d:rosh-hashanah
 Builtin  shavuot d:shavuot start-timer d:start-timer sunrise d:sunrise taanit-esther d:taanit-esther
-Builtin  ticks d:ticks ticks/sec d:ticks/sec timer d:timer tisha-beav d:tisha-beav tzadjust d:tzadjust
-Builtin  unix> d:unix> updatetz d:updatetz year@ d:year@ ymd d:ymd ymd> d:ymd> yom-haatsmaut d:yom-haatsmaut
-Builtin  yom-kippur d:yom-kippur add-func db:add-func bind db:bind close db:close col db:col col[] db:col[]
-Builtin  col{} db:col{} err? db:err? errmsg db:errmsg exec db:exec exec-cb db:exec-cb key db:key mysql? db:mysql?
-Builtin  odbc? db:odbc? open db:open open? db:open? prepare db:prepare query db:query query-all db:query-all
-Builtin  rekey db:rekey sqlerrmsg db:sqlerrmsg bp dbg:bp except-task@ dbg:except-task@ go dbg:go line-info dbg:line-info
-Builtin  prompt dbg:prompt stop dbg:stop trace dbg:trace trace-enter dbg:trace-enter trace-leave dbg:trace-leave
-Builtin  abspath f:abspath append f:append associate f:associate atime f:atime canwrite? f:canwrite?
-Builtin  chmod f:chmod close f:close copy f:copy copydir f:copydir create f:create ctime f:ctime dir? f:dir?
-Builtin  dname f:dname eachbuf f:eachbuf eachline f:eachline enssep f:enssep eof? f:eof? err? f:err?
-Builtin  exists? f:exists? flush f:flush fname f:fname getb f:getb getc f:getc getline f:getline getmod f:getmod
-Builtin  glob f:glob glob-nocase f:glob-nocase include f:include launch f:launch link f:link link> f:link>
-Builtin  link? f:link? mkdir f:mkdir mmap f:mmap mmap-range f:mmap-range mmap-range? f:mmap-range? mtime f:mtime
-Builtin  mv f:mv open f:open open-ro f:open-ro popen f:popen print f:print read f:read relpath f:relpath
-Builtin  rglob f:rglob rm f:rm rmdir f:rmdir seek f:seek sep f:sep show f:show size f:size slurp f:slurp
-Builtin  stderr f:stderr stdin f:stdin stdout f:stdout tell f:tell times f:times trash f:trash ungetb f:ungetb
-Builtin  ungetc f:ungetc unzip f:unzip unzip-entry f:unzip-entry watch f:watch write f:write writen f:writen
-Builtin  zip+ f:zip+ zip@ f:zip@ zipentry f:zipentry zipnew f:zipnew zipopen f:zipopen zipsave f:zipsave
-Builtin  bold font:bold face? font:face? glyph-path font:glyph-path glyph-pos font:glyph-pos info font:info
-Builtin  italic font:italic ls font:ls measure font:measure new font:new pixels font:pixels pixels? font:pixels?
-Builtin  points font:points points? font:points? styles font:styles styles? font:styles? underline font:underline
-Builtin  +child g:+child +kind g:+kind +path g:+path -child g:-child /path g:/path >img g:>img >progress g:>progress
-Builtin  add-items g:add-items adjustwidth g:adjustwidth allow-orient g:allow-orient arc g:arc arc2 g:arc2
-Builtin  autohide g:autohide back g:back bezier g:bezier bg g:bg bg? g:bg? bounds g:bounds bounds? g:bounds?
-Builtin  box-label g:box-label btn-font g:btn-font bubble g:bubble button-size g:button-size buttons-visible g:buttons-visible
-Builtin  c-text g:c-text callout g:callout center g:center child g:child clear g:clear clearpath g:clearpath
-Builtin  clr>n g:clr>n coleven g:coleven colordlg g:colordlg colwidth g:colwidth connectededges g:connectededges
-Builtin  contrasting g:contrasting cp g:cp curmouse? g:curmouse? default-font g:default-font deselect-row g:deselect-row
-Builtin  dismiss g:dismiss do g:do draw-fitted-text g:draw-fitted-text draw-text g:draw-text draw-text-at g:draw-text-at
-Builtin  each g:each edit-on-double-click g:edit-on-double-click editable g:editable editdlg g:editdlg
-Builtin  empty-text g:empty-text enable g:enable enabled? g:enabled? fade g:fade fb-files g:fb-files
-Builtin  fcolor g:fcolor fg g:fg fg? g:fg? file-filter g:file-filter file-name g:file-name filedlg g:filedlg
-Builtin  fill g:fill fillall g:fillall fit-text g:fit-text flex! g:flex! focus g:focus fontdlg g:fontdlg
-Builtin  forward g:forward fullscreen g:fullscreen get-lasso-items g:get-lasso-items get-tab g:get-tab
-Builtin  getclr g:getclr getfont g:getfont getimage g:getimage getpath g:getpath getroot g:getroot gradient g:gradient
-Builtin  gui? g:gui? handle g:handle headerheight g:headerheight hide g:hide image g:image image-at g:image-at
-Builtin  invalidate g:invalidate ix? g:ix? justify g:justify keyinfo g:keyinfo l-text g:l-text laf g:laf
-Builtin  laf! g:laf! laf? g:laf? len g:len line-width g:line-width lineto g:lineto list+ g:list+ list- g:list-
-Builtin  loadcontent g:loadcontent localize g:localize m! g:m! m@ g:m@ menu-font g:menu-font menu-update g:menu-update
-Builtin  menuenabled g:menuenabled mouse? g:mouse? mousepos? g:mousepos? moveto g:moveto msgdlg g:msgdlg
-Builtin  multi g:multi name g:name named-skin g:named-skin new g:new new-laf g:new-laf next g:next obj g:obj
-Builtin  on g:on on? g:on? ontop g:ontop oshandle g:oshandle outlinethickness g:outlinethickness panel-size g:panel-size
-Builtin  panel-size? g:panel-size? parent g:parent path g:path path>s g:path>s pie g:pie pix! g:pix!
-Builtin  pop g:pop popmenu g:popmenu pos? g:pos? prev g:prev propval! g:propval! propval@ g:propval@
-Builtin  push g:push qbezier g:qbezier quit g:quit r-text g:r-text readonly g:readonly rect g:rect refresh g:refresh
-Builtin  restore g:restore root g:root root-item-visible g:root-item-visible rotate g:rotate rowheight g:rowheight
-Builtin  rrect g:rrect s>path g:s>path save g:save say g:say scale g:scale scolor g:scolor scrollthickness g:scrollthickness
-Builtin  sectionenable g:sectionenable select! g:select! select@ g:select@ selected-rows g:selected-rows
-Builtin  set-lasso g:set-lasso set-long-press g:set-long-press set-popup-font g:set-popup-font set-range g:set-range
-Builtin  set-swipe g:set-swipe set-value g:set-value setcursor g:setcursor setfont g:setfont setheader g:setheader
-Builtin  sethtml g:sethtml setimage g:setimage setname g:setname setroot g:setroot settab g:settab show g:show
-Builtin  show-line-numbers g:show-line-numbers show-pct g:show-pct showmenu g:showmenu showtooltip g:showtooltip
-Builtin  size g:size size? g:size? skin g:skin skin-class g:skin-class stackix g:stackix state g:state
-Builtin  state? g:state? stepsize g:stepsize stroke g:stroke stroke-fill g:stroke-fill style g:style
-Builtin  tabname g:tabname text g:text text-box-style g:text-box-style text? g:text? textcolor g:textcolor
-Builtin  textsize g:textsize timer! g:timer! timer@ g:timer@ toback g:toback tofront g:tofront toggle-row g:toggle-row
-Builtin  tooltip g:tooltip top g:top transition g:transition translate g:translate tree-open g:tree-open
-Builtin  triangle g:triangle update g:update updateitems g:updateitems url g:url user g:user user! g:user!
-Builtin  vertical g:vertical view g:view visible? g:visible? vpos! g:vpos! vpos@ g:vpos@ waitcursor g:waitcursor
-Builtin  winding g:winding xy g:xy xy? g:xy? +edge gr:+edge +edge+w gr:+edge+w +node gr:+node connect gr:connect
-Builtin  edges gr:edges m! gr:m! m@ gr:m@ neighbors gr:neighbors new gr:new node-edges gr:node-edges
-Builtin  nodes gr:nodes traverse gr:traverse + h:+ clear h:clear len h:len new h:new peek h:peek pop h:pop
-Builtin  push h:push unique h:unique arm? hw:arm? camera hw:camera camera-fmt hw:camera-fmt camera-img hw:camera-img
-Builtin  camera? hw:camera? cpu? hw:cpu? device? hw:device? displays? hw:displays? displaysize? hw:displaysize?
-Builtin  err? hw:err? gpio hw:gpio gpio! hw:gpio! gpio-mmap hw:gpio-mmap gpio@ hw:gpio@ i2c hw:i2c i2c! hw:i2c!
-Builtin  i2c!reg hw:i2c!reg i2c@ hw:i2c@ i2c@reg hw:i2c@reg isround? hw:isround? iswatch? hw:iswatch?
-Builtin  mac? hw:mac? mem? hw:mem? poll hw:poll sensor hw:sensor start hw:start stop hw:stop fetch-full imap:fetch-full
-Builtin  fetch-uid-mail imap:fetch-uid-mail login imap:login new imap:new select-inbox imap:select-inbox
-Builtin  >file img:>file copy img:copy crop img:crop data img:data desat img:desat fill img:fill filter img:filter
-Builtin  flip img:flip from-svg img:from-svg new img:new pix! img:pix! pix@ img:pix@ qr-gen img:qr-gen
-Builtin  qr-parse img:qr-parse rotate img:rotate scale img:scale scroll img:scroll size img:size countries iso:countries
-Builtin  find loc:find sort loc:sort ! m:! !? m:!? + m:+ +? m:+? - m:- @ m:@ @? m:@? @@ m:@@ clear m:clear
-Builtin  data m:data each m:each exists? m:exists? iter m:iter iter-all m:iter-all keys m:keys len m:len
-Builtin  map m:map new m:new op! m:op! open m:open vals m:vals xchg m:xchg ! mat:! * mat:* + mat:+ = mat:=
-Builtin  @ mat:@ col mat:col data mat:data det mat:det dim? mat:dim? get-n mat:get-n ident mat:ident
-Builtin  m. mat:m. minor mat:minor n* mat:n* new mat:new row mat:row same-size? mat:same-size? trans mat:trans
-Builtin  ! n:! * n:* */ n:*/ + n:+ +! n:+! - n:- / n:/ /mod n:/mod 1+ n:1+ 1- n:1- < n:< = n:= > n:>
-Builtin  BIGE n:BIGE BIGPI n:BIGPI E n:E PI n:PI ^ n:^ abs n:abs acos n:acos acos n:acos asin n:asin
-Builtin  asin n:asin atan n:atan atan n:atan atan2 n:atan2 band n:band between n:between bfloat n:bfloat
-Builtin  bic n:bic bint n:bint binv n:binv bnot n:bnot bor n:bor bxor n:bxor ceil n:ceil clamp n:clamp
-Builtin  cmp n:cmp comb n:comb cos n:cos cosd n:cosd exp n:exp expmod n:expmod float n:float floor n:floor
+Builtin  ticks d:ticks ticks/sec d:ticks/sec timer d:timer timer-ctrl d:timer-ctrl tisha-beav d:tisha-beav
+Builtin  tzadjust d:tzadjust unix> d:unix> unknown d:unknown unknown? d:unknown? updatetz d:updatetz
+Builtin  year@ d:year@ ymd d:ymd ymd> d:ymd> yom-haatsmaut d:yom-haatsmaut yom-kippur d:yom-kippur add-func db:add-func
+Builtin  aes! db:aes! begin db:begin bind db:bind bind-exec db:bind-exec bind-exec[] db:bind-exec[]
+Builtin  close db:close col db:col col[] db:col[] col{} db:col{} commit db:commit each db:each exec db:exec
+Builtin  exec-cb db:exec-cb exec-name db:exec-name get db:get get-sub db:get-sub key db:key kind? db:kind?
+Builtin  last-rowid db:last-rowid mysql? db:mysql? odbc? db:odbc? open db:open open? db:open? prep-name db:prep-name
+Builtin  prepare db:prepare query db:query query-all db:query-all rekey db:rekey rollback db:rollback
+Builtin  set db:set set-sub db:set-sub sql@ db:sql@ bp dbg:bp except-task@ dbg:except-task@ go dbg:go
+Builtin  line-info dbg:line-info prompt dbg:prompt stop dbg:stop trace dbg:trace trace-enter dbg:trace-enter
+Builtin  trace-leave dbg:trace-leave / f:/ abspath f:abspath absrel f:absrel append f:append associate f:associate
+Builtin  atime f:atime canwrite? f:canwrite? chmod f:chmod close f:close copy f:copy copydir f:copydir
+Builtin  create f:create ctime f:ctime dir? f:dir? dname f:dname eachbuf f:eachbuf eachline f:eachline
+Builtin  enssep f:enssep eof? f:eof? exists? f:exists? flush f:flush fname f:fname getb f:getb getc f:getc
+Builtin  getline f:getline getmod f:getmod glob f:glob glob-nocase f:glob-nocase homedir f:homedir homedir! f:homedir!
+Builtin  include f:include ioctl f:ioctl join f:join launch f:launch link f:link link> f:link> link? f:link?
+Builtin  mkdir f:mkdir mmap f:mmap mmap-range f:mmap-range mmap-range? f:mmap-range? mtime f:mtime mv f:mv
+Builtin  name@ f:name@ open f:open open-ro f:open-ro popen f:popen print f:print read f:read read? f:read?
+Builtin  relpath f:relpath rglob f:rglob rm f:rm rmdir f:rmdir seek f:seek sep f:sep size f:size slurp f:slurp
+Builtin  sparse? f:sparse? spit f:spit stderr f:stderr stdin f:stdin stdout f:stdout tell f:tell times f:times
+Builtin  tmpspit f:tmpspit trash f:trash truncate f:truncate ungetb f:ungetb ungetc f:ungetc unzip f:unzip
+Builtin  unzip-entry f:unzip-entry watch f:watch write f:write writen f:writen zip+ f:zip+ zip@ f:zip@
+Builtin  zipentry f:zipentry zipnew f:zipnew zipopen f:zipopen zipsave f:zipsave atlas! font:atlas!
+Builtin  atlas@ font:atlas@ default-size font:default-size info font:info ls font:ls measure font:measure
+Builtin  new font:new oversample font:oversample pixels font:pixels pixels? font:pixels? +edge gr:+edge
+Builtin  +edge+w gr:+edge+w +node gr:+node connect gr:connect edges gr:edges edges! gr:edges! m! gr:m!
+Builtin  m@ gr:m@ neighbors gr:neighbors new gr:new node-edges gr:node-edges nodes gr:nodes traverse gr:traverse
+Builtin  weight! gr:weight! + h:+ clear h:clear cmp! h:cmp! len h:len max! h:max! new h:new peek h:peek
+Builtin  pop h:pop push h:push unique h:unique arm? hw:arm? camera hw:camera camera-img hw:camera-img
+Builtin  camera-limits hw:camera-limits camera? hw:camera? cpu? hw:cpu? device? hw:device? displays? hw:displays?
+Builtin  displaysize? hw:displaysize? finger-match hw:finger-match finger-support hw:finger-support
+Builtin  gpio hw:gpio gpio! hw:gpio! gpio-mmap hw:gpio-mmap gpio@ hw:gpio@ i2c hw:i2c i2c! hw:i2c! i2c!reg hw:i2c!reg
+Builtin  i2c@ hw:i2c@ i2c@reg hw:i2c@reg isround? hw:isround? iswatch? hw:iswatch? mac? hw:mac? mem? hw:mem?
+Builtin  model? hw:model? poll hw:poll sensor hw:sensor start hw:start stop hw:stop uid? hw:uid? fetch-full imap:fetch-full
+Builtin  fetch-uid-mail imap:fetch-uid-mail login imap:login logout imap:logout new imap:new search imap:search
+Builtin  select-inbox imap:select-inbox >file img:>file >fmt img:>fmt copy img:copy crop img:crop data img:data
+Builtin  desat img:desat fill img:fill fillrect img:fillrect filter img:filter flip img:flip from-svg img:from-svg
+Builtin  new img:new pix! img:pix! pix@ img:pix@ qr-gen img:qr-gen qr-parse img:qr-parse rotate img:rotate
+Builtin  scale img:scale scroll img:scroll size img:size countries iso:countries find loc:find sort loc:sort
+Builtin  ! m:! !? m:!? + m:+ +? m:+? - m:- >arr m:>arr @ m:@ @? m:@? _! m:_! _@ m:_@ arr> m:arr> bitmap m:bitmap
+Builtin  clear m:clear data m:data each m:each exists? m:exists? filter m:filter iter m:iter iter-all m:iter-all
+Builtin  keys m:keys len m:len map m:map merge m:merge new m:new op! m:op! open m:open slice m:slice
+Builtin  vals m:vals xchg m:xchg zip m:zip ! mat:! * mat:* + mat:+ = mat:= @ mat:@ affine mat:affine
+Builtin  col mat:col data mat:data det mat:det dim? mat:dim? get-n mat:get-n ident mat:ident inv mat:inv
+Builtin  m. mat:m. minor mat:minor n* mat:n* new mat:new new-minor mat:new-minor rotate mat:rotate row mat:row
+Builtin  same-size? mat:same-size? scale mat:scale shear mat:shear trans mat:trans translate mat:translate
+Builtin  xform mat:xform 2console md:2console 2html md:2html 2nk md:2nk bounds meta:bounds color meta:color
+Builtin  console meta:console end meta:end ffi meta:ffi ! n:! * n:* */ n:*/ + n:+ +! n:+! - n:- / n:/
+Builtin  /mod n:/mod 1+ n:1+ 1- n:1- < n:< = n:= > n:> BIGE n:BIGE BIGPI n:BIGPI E n:E PI n:PI ^ n:^
+Builtin  _mod n:_mod abs n:abs acos n:acos acos n:acos asin n:asin asin n:asin atan n:atan atan n:atan
+Builtin  atan2 n:atan2 band n:band between n:between bfloat n:bfloat bic n:bic bint n:bint binv n:binv
+Builtin  bnot n:bnot bor n:bor bxor n:bxor cast n:cast ceil n:ceil clamp n:clamp cmp n:cmp comb n:comb
+Builtin  cos n:cos cosd n:cosd emod n:emod exp n:exp expm1 n:expm1 expmod n:expmod float n:float floor n:floor
 Builtin  fmod n:fmod frac n:frac gcd n:gcd int n:int invmod n:invmod kind? n:kind? lcm n:lcm ln n:ln
-Builtin  max n:max median n:median min n:min mod n:mod neg n:neg odd? n:odd? perm n:perm prime? n:prime?
-Builtin  quantize n:quantize quantize! n:quantize! r+ n:r+ range n:range rot32l n:rot32l rot32r n:rot32r
-Builtin  round n:round round2 n:round2 running-variance n:running-variance running-variance-finalize n:running-variance-finalize
-Builtin  sgn n:sgn shl n:shl shr n:shr sin n:sin sind n:sind sqr n:sqr sqrt n:sqrt tan n:tan tand n:tand
-Builtin  trunc n:trunc ~= n:~= ! net:! >url net:>url @ net:@ DGRAM net:DGRAM INET4 net:INET4 INET6 net:INET6
-Builtin  PROTO_TCP net:PROTO_TCP PROTO_UDP net:PROTO_UDP STREAM net:STREAM accept net:accept addrinfo>o net:addrinfo>o
-Builtin  again? net:again? alloc-and-read net:alloc-and-read alloc-buf net:alloc-buf bind net:bind browse net:browse
-Builtin  close net:close connect net:connect err>s net:err>s err? net:err? get net:get getaddrinfo net:getaddrinfo
-Builtin  getpeername net:getpeername head net:head ifaces? net:ifaces? listen net:listen net-socket net:net-socket
-Builtin  opts net:opts port-is-ssl? net:port-is-ssl? post net:post proxy! net:proxy! read net:read recvfrom net:recvfrom
-Builtin  s>url net:s>url sendto net:sendto server net:server setsockopt net:setsockopt socket net:socket
-Builtin  tlshello net:tlshello url> net:url> user-agent net:user-agent wait net:wait write net:write
-Builtin  MAX ns:MAX cast ptr:cast len ptr:len pack ptr:pack unpack ptr:unpack unpack_orig ptr:unpack_orig
+Builtin  ln1p n:ln1p max n:max median n:median min n:min mod n:mod neg n:neg odd? n:odd? perm n:perm
+Builtin  prime? n:prime? quantize n:quantize quantize! n:quantize! r+ n:r+ range n:range rot32l n:rot32l
+Builtin  rot32r n:rot32r round n:round round2 n:round2 rounding n:rounding running-variance n:running-variance
+Builtin  running-variance-finalize n:running-variance-finalize sgn n:sgn shl n:shl shr n:shr sin n:sin
+Builtin  sind n:sind sqr n:sqr sqrt n:sqrt tan n:tan tand n:tand trunc n:trunc ~= n:~= ! net:! !? net:!?
+Builtin  - net:- >url net:>url @ net:@ @? net:@? DGRAM net:DGRAM INET4 net:INET4 INET6 net:INET6 PROTO_TCP net:PROTO_TCP
+Builtin  PROTO_UDP net:PROTO_UDP STREAM net:STREAM accept net:accept addrinfo>o net:addrinfo>o again? net:again?
+Builtin  alloc-and-read net:alloc-and-read alloc-buf net:alloc-buf bind net:bind close net:close closed? net:closed?
+Builtin  connect net:connect debug? net:debug? delete net:delete get net:get getaddrinfo net:getaddrinfo
+Builtin  getpeername net:getpeername head net:head ifaces? net:ifaces? listen net:listen map>url net:map>url
+Builtin  net-socket net:net-socket opts net:opts port-is-ssl? net:port-is-ssl? post net:post proxy! net:proxy!
+Builtin  put net:put read net:read read-all net:read-all recvfrom net:recvfrom s>url net:s>url sendto net:sendto
+Builtin  server net:server setsockopt net:setsockopt socket net:socket tlshello net:tlshello url> net:url>
+Builtin  user-agent net:user-agent wait net:wait write net:write (begin) nk:(begin) (chart-begin) nk:(chart-begin)
+Builtin  (chart-begin-colored) nk:(chart-begin-colored) (chart-end) nk:(chart-end) (end) nk:(end) (group-begin) nk:(group-begin)
+Builtin  (group-end) nk:(group-end) (property) nk:(property) >img nk:>img addfont nk:addfont anti-alias nk:anti-alias
+Builtin  any-clicked? nk:any-clicked? bounds nk:bounds bounds! nk:bounds! button nk:button button-color nk:button-color
+Builtin  button-label nk:button-label button-set-behavior nk:button-set-behavior button-symbol  nk:button-symbol 
+Builtin  button-symbol-label nk:button-symbol-label chart-add-slot nk:chart-add-slot chart-add-slot-colored nk:chart-add-slot-colored
+Builtin  chart-push nk:chart-push chart-push-slot nk:chart-push-slot checkbox nk:checkbox clicked? nk:clicked?
+Builtin  close-this! nk:close-this! close-this? nk:close-this? close? nk:close? color-picker nk:color-picker
+Builtin  combo nk:combo combo-begin-color nk:combo-begin-color combo-begin-label nk:combo-begin-label
+Builtin  combo-cb nk:combo-cb combo-end nk:combo-end contextual-begin nk:contextual-begin contextual-close nk:contextual-close
+Builtin  contextual-end nk:contextual-end contextual-item-image-text nk:contextual-item-image-text contextual-item-symbol-text nk:contextual-item-symbol-text
+Builtin  contextual-item-text nk:contextual-item-text cp! nk:cp! cp@ nk:cp@ display-info nk:display-info
+Builtin  display@ nk:display@ do nk:do down? nk:down? draw-image nk:draw-image draw-image-at nk:draw-image-at
+Builtin  draw-image-centered nk:draw-image-centered draw-sub-image nk:draw-sub-image draw-text nk:draw-text
+Builtin  draw-text-high nk:draw-text-high draw-text-wrap nk:draw-text-wrap edit-focus nk:edit-focus
+Builtin  edit-string nk:edit-string event nk:event event-boost nk:event-boost event-msec nk:event-msec
+Builtin  event-wait nk:event-wait fill-arc nk:fill-arc fill-circle nk:fill-circle fill-poly nk:fill-poly
+Builtin  fill-rect nk:fill-rect fill-rect-color nk:fill-rect-color fill-triangle nk:fill-triangle flags! nk:flags!
+Builtin  flags@ nk:flags@ fullscreen nk:fullscreen get nk:get get-row-height nk:get-row-height getfont nk:getfont
+Builtin  getmap nk:getmap gl? nk:gl? grid nk:grid grid-push nk:grid-push group-scroll-ofs nk:group-scroll-ofs
+Builtin  group-scroll-ofs! nk:group-scroll-ofs! hovered? nk:hovered? image nk:image init nk:init input-button nk:input-button
+Builtin  input-key nk:input-key input-motion nk:input-motion input-scroll nk:input-scroll input-string nk:input-string
+Builtin  key-down? nk:key-down? key-pressed? nk:key-pressed? key-released? nk:key-released? label nk:label
+Builtin  label-colored nk:label-colored label-wrap nk:label-wrap label-wrap-colored nk:label-wrap-colored
+Builtin  layout-bounds nk:layout-bounds layout-grid-begin nk:layout-grid-begin layout-grid-end nk:layout-grid-end
+Builtin  layout-push-dynamic nk:layout-push-dynamic layout-push-static nk:layout-push-static layout-push-variable nk:layout-push-variable
+Builtin  layout-ratio-from-pixel nk:layout-ratio-from-pixel layout-reset-row-height nk:layout-reset-row-height
+Builtin  layout-row nk:layout-row layout-row-begin nk:layout-row-begin layout-row-dynamic nk:layout-row-dynamic
+Builtin  layout-row-end nk:layout-row-end layout-row-height nk:layout-row-height layout-row-push nk:layout-row-push
+Builtin  layout-row-static nk:layout-row-static layout-row-template-begin nk:layout-row-template-begin
+Builtin  layout-row-template-end nk:layout-row-template-end layout-space-begin nk:layout-space-begin
+Builtin  layout-space-end nk:layout-space-end layout-space-push nk:layout-space-push layout-widget-bounds nk:layout-widget-bounds
+Builtin  list-begin nk:list-begin list-end nk:list-end list-new nk:list-new list-range nk:list-range
+Builtin  m! nk:m! m@ nk:m@ make-style nk:make-style max-vertex-element nk:max-vertex-element measure nk:measure
+Builtin  measure-font nk:measure-font menu-begin nk:menu-begin menu-close nk:menu-close menu-end nk:menu-end
+Builtin  menu-item-image nk:menu-item-image menu-item-label nk:menu-item-label menu-item-symbol nk:menu-item-symbol
+Builtin  menubar-begin nk:menubar-begin menubar-end nk:menubar-end mouse-pos nk:mouse-pos msgdlg nk:msgdlg
+Builtin  option nk:option plot nk:plot plot-fn nk:plot-fn pop-font nk:pop-font popup-begin nk:popup-begin
+Builtin  popup-close nk:popup-close popup-end nk:popup-end popup-scroll-ofs nk:popup-scroll-ofs popup-scroll-ofs! nk:popup-scroll-ofs!
+Builtin  progress nk:progress prop-int nk:prop-int pt>local nk:pt>local pt>screen nk:pt>screen pts>rect nk:pts>rect
+Builtin  push-font nk:push-font rect-center nk:rect-center rect-intersect nk:rect-intersect rect-ofs nk:rect-ofs
+Builtin  rect-pad nk:rect-pad rect-shrink nk:rect-shrink rect-union nk:rect-union rect/high nk:rect/high
+Builtin  rect/wide nk:rect/wide rect>center nk:rect>center rect>local nk:rect>local rect>pos nk:rect>pos
+Builtin  rect>pts nk:rect>pts rect>screen nk:rect>screen rect>size nk:rect>size released? nk:released?
+Builtin  render nk:render restore nk:restore rotate nk:rotate save nk:save scale nk:scale scancode? nk:scancode?
+Builtin  screen-saver nk:screen-saver screen-size nk:screen-size screen-win-close nk:screen-win-close
+Builtin  selectable nk:selectable set nk:set set-font nk:set-font set-num-vertices nk:set-num-vertices
+Builtin  setpos nk:setpos setwin nk:setwin slider nk:slider slider-int nk:slider-int space nk:space
+Builtin  spacing nk:spacing stroke-arc nk:stroke-arc stroke-circle nk:stroke-circle stroke-curve nk:stroke-curve
+Builtin  stroke-line nk:stroke-line stroke-polygon nk:stroke-polygon stroke-polyline nk:stroke-polyline
+Builtin  stroke-rect nk:stroke-rect stroke-tri nk:stroke-tri style-from-table nk:style-from-table sw-gl nk:sw-gl
+Builtin  text? nk:text? tooltip nk:tooltip translate nk:translate tree-pop nk:tree-pop tree-state-push nk:tree-state-push
+Builtin  use-style nk:use-style vsync nk:vsync widget nk:widget widget-bounds nk:widget-bounds widget-fitting nk:widget-fitting
+Builtin  widget-high nk:widget-high widget-hovered? nk:widget-hovered? widget-mouse-click-down? nk:widget-mouse-click-down?
+Builtin  widget-mouse-clicked? nk:widget-mouse-clicked? widget-pos nk:widget-pos widget-size nk:widget-size
+Builtin  widget-wide nk:widget-wide win nk:win win-bounds nk:win-bounds win-bounds! nk:win-bounds! win-close nk:win-close
+Builtin  win-closed? nk:win-closed? win-collapse nk:win-collapse win-collapsed? nk:win-collapsed? win-content-bounds nk:win-content-bounds
+Builtin  win-focus nk:win-focus win-focused? nk:win-focused? win-hidden? nk:win-hidden? win-high nk:win-high
+Builtin  win-hovered? nk:win-hovered? win-pos nk:win-pos win-scroll-ofs nk:win-scroll-ofs win-scroll-ofs! nk:win-scroll-ofs!
+Builtin  win-show nk:win-show win-size nk:win-size win-wide nk:win-wide win? nk:win? MAX ns:MAX ! o:!
+Builtin  + o:+ +? o:+? ??? o:??? @ o:@ class o:class exec o:exec isa o:isa method o:method mutate o:mutate
+Builtin  new o:new super o:super devname os:devname env os:env lang os:lang mem-arenas os:mem-arenas
+Builtin  notify os:notify region os:region cast ptr:cast len ptr:len null? ptr:null? pack ptr:pack unpack ptr:unpack
+Builtin  unpack_orig ptr:unpack_orig publish pubsub:publish qsize pubsub:qsize subscribe pubsub:subscribe
 Builtin  + q:+ clear q:clear len q:len new q:new notify q:notify overwrite q:overwrite peek q:peek pick q:pick
-Builtin  pop q:pop push q:push shift q:shift size q:size slide q:slide throwing q:throwing wait q:wait
-Builtin  ++match r:++match +/ r:+/ +match r:+match / r:/ @ r:@ err? r:err? len r:len match r:match new r:new
-Builtin  rx r:rx str r:str ! s:! * s:* + s:+ - s:- / s:/ /scripts s:/scripts <+ s:<+ = s:= =ic s:=ic
-Builtin  >base64 s:>base64 >ucs2 s:>ucs2 @ s:@ append s:append base64> s:base64> clear s:clear cmp s:cmp
-Builtin  cmpi s:cmpi compress s:compress days! s:days! each s:each eachline s:eachline expand s:expand
-Builtin  fill s:fill fmt s:fmt gershayim s:gershayim globmatch s:globmatch hexupr s:hexupr insert s:insert
-Builtin  intl s:intl intl! s:intl! lang s:lang lc s:lc len s:len lsub s:lsub ltrim s:ltrim map s:map
-Builtin  months! s:months! new s:new replace s:replace replace! s:replace! rev s:rev rsearch s:rsearch
-Builtin  rsub s:rsub rtrim s:rtrim script? s:script? search s:search size s:size slice s:slice strfmap s:strfmap
-Builtin  strfmt s:strfmt trim s:trim tsub s:tsub uc s:uc ucs2> s:ucs2> utf8? s:utf8? zt s:zt close sio:close
-Builtin  enum sio:enum open sio:open opts! sio:opts! opts@ sio:opts@ read sio:read write sio:write new smtp:new
-Builtin  send smtp:send apply-filter snd:apply-filter devices? snd:devices? end-record snd:end-record
-Builtin  filter snd:filter formats? snd:formats? freq snd:freq gain snd:gain gain? snd:gain? len snd:len
-Builtin  loop snd:loop mix snd:mix new snd:new pause snd:pause play snd:play played snd:played rate snd:rate
-Builtin  record snd:record seek snd:seek stop snd:stop stopall snd:stopall unmix snd:unmix volume snd:volume
-Builtin  volume? snd:volume? + st:+ . st:. clear st:clear len st:len ndrop st:ndrop new st:new op! st:op!
-Builtin  peek st:peek pick st:pick pop st:pop push st:push roll st:roll shift st:shift size st:size
-Builtin  slide st:slide swap st:swap throwing st:throwing >buf struct:>buf arr> struct:arr> buf struct:buf
-Builtin  buf> struct:buf> byte struct:byte double struct:double field! struct:field! field@ struct:field@
-Builtin  float struct:float ignore struct:ignore int struct:int long struct:long struct; struct:struct;
-Builtin  word struct:word ! t:! @ t:@ assign t:assign curtask t:curtask def-queue t:def-queue def-stack t:def-stack
-Builtin  done? t:done? err! t:err! err? t:err? getq t:getq guitask t:guitask handler t:handler kill t:kill
-Builtin  list t:list main t:main name! t:name! name@ t:name@ notify t:notify pop t:pop priority t:priority
-Builtin  push t:push push< t:push< q-notify t:q-notify q-wait t:q-wait qlen t:qlen result t:result task t:task
-Builtin  task-n t:task-n task-stop t:task-stop wait t:wait ! w:! @ w:@ alias: w:alias: cb w:cb deprecate w:deprecate
-Builtin  exec w:exec exec? w:exec? ffifail w:ffifail find w:find forget w:forget is w:is undo w:undo
-Builtin  >s xml:>s >txt xml:>txt parse xml:parse parse-html xml:parse-html parse-stream xml:parse-stream
+Builtin  pop q:pop push q:push remove q:remove shift q:shift size q:size slide q:slide throwing q:throwing
+Builtin  wait q:wait ++match r:++match +/ r:+/ +match r:+match / r:/ @ r:@ len r:len match r:match new r:new
+Builtin  rx r:rx str r:str * rat:* + rat:+ - rat:- / rat:/ >n rat:>n >s rat:>s new rat:new proper rat:proper
+Builtin  ! s:! * s:* + s:+ - s:- / s:/ /scripts s:/scripts <+ s:<+ = s:= =ic s:=ic >base64 s:>base64
+Builtin  >ucs2 s:>ucs2 @ s:@ append s:append base64> s:base64> clear s:clear cmp s:cmp cmpi s:cmpi compress s:compress
+Builtin  days! s:days! dist s:dist each s:each each! s:each! eachline s:eachline escape s:escape expand s:expand
+Builtin  fill s:fill fmt s:fmt fold s:fold gershayim s:gershayim globmatch s:globmatch hexupr s:hexupr
+Builtin  insert s:insert intl s:intl intl! s:intl! lang s:lang lc s:lc lc? s:lc? len s:len lsub s:lsub
+Builtin  ltrim s:ltrim map s:map months! s:months! new s:new norm s:norm reduce s:reduce repinsert s:repinsert
+Builtin  replace s:replace replace! s:replace! rev s:rev rsearch s:rsearch rsub s:rsub rtrim s:rtrim
+Builtin  script? s:script? search s:search size s:size slice s:slice soundex s:soundex strfmap s:strfmap
+Builtin  strfmt s:strfmt text-wrap s:text-wrap trim s:trim tsub s:tsub uc s:uc uc? s:uc? ucs2> s:ucs2>
+Builtin  utf8? s:utf8? zt s:zt close sio:close enum sio:enum open sio:open opts! sio:opts! opts@ sio:opts@
+Builtin  read sio:read write sio:write @ slv:@ auto slv:auto build slv:build constraint slv:constraint
+Builtin  dump slv:dump edit slv:edit named-variable slv:named-variable new slv:new relation slv:relation
+Builtin  reset slv:reset suggest slv:suggest term slv:term update slv:update v[] slv:v[] variable slv:variable
+Builtin  v{} slv:v{} new smtp:new send smtp:send apply-filter snd:apply-filter devices? snd:devices?
+Builtin  end-record snd:end-record filter snd:filter formats? snd:formats? freq snd:freq gain snd:gain
+Builtin  gain? snd:gain? init snd:init len snd:len loop snd:loop loop? snd:loop? mix snd:mix new snd:new
+Builtin  pause snd:pause play snd:play played snd:played rate snd:rate ready? snd:ready? record snd:record
+Builtin  resume snd:resume seek snd:seek stop snd:stop stopall snd:stopall volume snd:volume volume? snd:volume?
+Builtin  + st:+ . st:. clear st:clear len st:len ndrop st:ndrop new st:new op! st:op! peek st:peek pick st:pick
+Builtin  pop st:pop push st:push roll st:roll shift st:shift size st:size slide st:slide swap st:swap
+Builtin  throwing st:throwing >buf struct:>buf arr> struct:arr> buf struct:buf buf> struct:buf> byte struct:byte
+Builtin  double struct:double field! struct:field! field@ struct:field@ float struct:float ignore struct:ignore
+Builtin  int struct:int long struct:long struct; struct:struct; word struct:word ! t:! @ t:@ by-name t:by-name
+Builtin  cor t:cor cor-drop t:cor-drop curtask t:curtask def-queue t:def-queue def-stack t:def-stack
+Builtin  done? t:done? err! t:err! err? t:err? errno? t:errno? getq t:getq handler t:handler handler@ t:handler@
+Builtin  kill t:kill list t:list main t:main max-exceptions t:max-exceptions name! t:name! name@ t:name@
+Builtin  notify t:notify parent t:parent pop t:pop priority t:priority push t:push q-notify t:q-notify
+Builtin  q-wait t:q-wait qlen t:qlen result t:result set-affinity t:set-affinity setq t:setq start t:start
+Builtin  task t:task task-n t:task-n task-stop t:task-stop wait t:wait yield t:yield yield! t:yield!
+Builtin  add tree:add binary tree:binary bk tree:bk btree tree:btree cmp! tree:cmp! data tree:data del tree:del
+Builtin  find tree:find iter tree:iter next tree:next nodes tree:nodes parent tree:parent parse tree:parse
+Builtin  prev tree:prev root tree:root search tree:search trie tree:trie ! w:! (is) w:(is) @ w:@ alias: w:alias:
+Builtin  cb w:cb deprecate w:deprecate dlcall w:dlcall dlopen w:dlopen dlsym w:dlsym exec w:exec exec? w:exec?
+Builtin  ffifail w:ffifail find w:find forget w:forget is w:is name w:name undo w:undo >s xml:>s >txt xml:>txt
+Builtin  md-init xml:md-init md-parse xml:md-parse parse xml:parse parse-html xml:parse-html parse-stream xml:parse-stream
 Builtin  getmsg[] zmq:getmsg[] sendmsg[] zmq:sendmsg[]
+
 " numbers
 syn keyword eighthMath decimal hex base@ base! 
 syn match eighthInteger '\<-\=[0-9.]*[0-9.]\+\>'
+
 " recognize hex and binary numbers, the '$' and '%' notation is for eighth
 syn match eighthInteger '\<\$\x*\x\+\>' " *1* --- dont't mess
 syn match eighthInteger '\<\x*\d\x*\>'  " *2* --- this order!
@@ -280,20 +353,17 @@ syn match eighthInteger "\<'.\>"
 syn region eighthString start=+\.\?\"+ skip=+"+ end=+$+
 syn keyword jsonNull null
 syn keyword jsonBool /\(true\|false\)/
- syn region eighthString start=/\<"/ end=/"\>/ 
+syn region eighthString start=/\<"/ end=/"\>/ 
 syn match jsonObjEntry /"\"[^"]\+\"\ze\s*:/
 
-"syn region jsonObject start=/{/ end=/}/ contained contains=jsonObjEntry,jsonArray,jsonObject, jsonBool, eighthString
-"syn region jsonArray start=/\[/ end=/\]/ contained contains=jsonArray,jsonObject, jsonBool, eighthString
-
 " Include files
-" syn match eighthInclude '\<\(libinclude\|include\|needs\)\s\+\S\+'
 syn region eighthComment start="\zs\\" end="$" contains=eighthTodo
 
 " Define the default highlighting.
 if !exists("did_eighth_syntax_inits")
     let did_eighth_syntax_inits=1
-    " The default methods for highlighting. Can be overridden later.
+
+    " The default methods for highlighting. Can be overriden later.
     hi def link eighthTodo Todo
     hi def link eighthOperators Operator
     hi def link eighthMath Number
@@ -320,16 +390,15 @@ if !exists("did_eighth_syntax_inits")
     hi def link eighthBuiltin Define
     hi def link eighthClasses Define
     hi def link eighthClassWord Keyword
-
     hi def link jsonObject Delimiter
     hi def link jsonObjEntry Label
     hi def link jsonArray Special
-  hi def link jsonNull            Function
-  hi def link jsonBool         Boolean
+    hi def link jsonNull Function
+    hi def link jsonBool Boolean
 endif
 
 let b:current_syntax = "8th"
 let &cpo = s:cpo_save
 unlet s:cpo_save
 
-" vim: ts=8:sw=4:nocindent:smartindent:
+" vim: ft=vim:ts=8:sw=4:nocindent:smartindent:

runtime/syntax/arduino.vim

@@ -1,50 +1,79 @@
 " Vim syntax file
 " Language:    Arduino
 " Maintainer:  Johannes Hoff <johannes@johanneshoff.com>
-" Last Change: 2011 June 3
+" Last Change: 21 October 2021
 " License:     VIM license (:help license, replace vim by arduino.vim)
 
 " Syntax highlighting like in the Arduino IDE
-" Keywords extracted from <arduino>/build/shared/lib/keywords.txt (arduino
-" version 0021)
+" Automatically generated by the script available at
+"    https://bitbucket.org/johannes/arduino-vim-syntax
+" Using keywords from <arduino>/build/shared/lib/keywords.txt
+" From version: 1.8.16
 
-" Thanks to Rik, Erik Nomitch, Adam Obeng and Graeme Cross for helpful feedback!
+" Thanks to Rik, Erik Nomitch, Adam Obeng, Graeme Cross and Niall Parker
+" for helpful feedback!
 
-" quit when a syntax file was already loaded
-if exists("b:current_syntax")
+" For version 5.x: Clear all syntax items
+" For version 6.x: Quit when a syntax file was already loaded
+if version < 600
+  syntax clear
+elseif exists("b:current_syntax")
   finish
 endif
 
 " Read the C syntax to start with
-runtime! syntax/cpp.vim
+if version < 600
+  so <sfile>:p:h/cpp.vim
+else
+  runtime! syntax/cpp.vim
+endif
 
-syn keyword arduinoConstant HIGH LOW INPUT OUTPUT
-syn keyword arduinoConstant DEC BIN HEX OCT BYTE
-syn keyword arduinoConstant PI HALF_PI TWO_PI
-syn keyword arduinoConstant LSBFIRST MSBFIRST 
-syn keyword arduinoConstant CHANGE FALLING RISING 
-syn keyword arduinoConstant SERIAL DISPLAY
-syn keyword arduinoConstant DEFAULT EXTERNAL INTERNAL INTERNAL1V1 INTERNAL2V56
+syn keyword arduinoConstant  BIN CHANGE DEC DEFAULT EXTERNAL FALLING HALF_PI HEX
+syn keyword arduinoConstant  HIGH INPUT INPUT_PULLUP INTERNAL INTERNAL1V1
+syn keyword arduinoConstant  INTERNAL2V56 LED_BUILTIN LED_BUILTIN_RX
+syn keyword arduinoConstant  LED_BUILTIN_TX LOW LSBFIRST MSBFIRST OCT OUTPUT PI
+syn keyword arduinoConstant  RISING TWO_PI
 
-syn keyword arduinoStdFunc abs acos asin atan atan2 ceil constrain
-syn keyword arduinoStdFunc cos degrees exp floor log
-syn keyword arduinoStdFunc map max min pow radians 
-syn keyword arduinoStdFunc round sin sq sqrt tan
-syn keyword arduinoStdFunc randomSeed random
+syn keyword arduinoFunc      analogRead analogReadResolution analogReference
+syn keyword arduinoFunc      analogWrite analogWriteResolution attachInterrupt
+syn keyword arduinoFunc      bit bitClear bitRead bitSet bitWrite delay
+syn keyword arduinoFunc      delayMicroseconds detachInterrupt
+syn keyword arduinoFunc      digitalPinToInterrupt digitalRead digitalWrite
+syn keyword arduinoFunc      highByte interrupts lowByte micros millis
+syn keyword arduinoFunc      noInterrupts noTone pinMode pulseIn pulseInLong
+syn keyword arduinoFunc      shiftIn shiftOut tone yield
 
-syn keyword arduinoFunc analogReference analogRead analogWrite 
-syn keyword arduinoFunc attachInterrupt detachInterrupt interrupts noInterrupts 
-syn keyword arduinoFunc lowByte highByte bitRead bitWrite bitSet bitClear
-syn keyword arduinoFunc millis micros delay delayMicroseconds 
-syn keyword arduinoFunc pinMode digitalWrite digitalRead 
-syn keyword arduinoFunc tone noTone pulseIn shiftOut 
+syn keyword arduinoMethod    available availableForWrite begin charAt compareTo
+syn keyword arduinoMethod    concat end endsWith equals equalsIgnoreCase export
+syn keyword arduinoMethod    final find findUntil flush getBytes indexOf
+syn keyword arduinoMethod    lastIndexOf length loop override parseFloat
+syn keyword arduinoMethod    parseInt peek print println read readBytes
+syn keyword arduinoMethod    readBytesUntil readString readStringUntil replace
+syn keyword arduinoMethod    setCharAt setTimeout setup startsWith Stream
+syn keyword arduinoMethod    substring toCharArray toInt toLowerCase toUpperCase
+syn keyword arduinoMethod    trim
 
-syn keyword arduinoMethod setup loop
-syn keyword arduinoMethod begin end available read flush print println write peek
+syn keyword arduinoModule    Keyboard Mouse Serial Serial1 Serial2 Serial3
+syn keyword arduinoModule    SerialUSB
 
-syn keyword arduinoType boolean byte word String 
+syn keyword arduinoStdFunc   abs accept acos acosf asin asinf atan atan2 atan2f
+syn keyword arduinoStdFunc   atanf cbrt cbrtf ceil ceilf click constrain
+syn keyword arduinoStdFunc   copysign copysignf cos cosf cosh coshf degrees exp
+syn keyword arduinoStdFunc   expf fabs fabsf fdim fdimf floor floorf fma fmaf
+syn keyword arduinoStdFunc   fmax fmaxf fmin fminf fmod fmodf hypot hypotf
+syn keyword arduinoStdFunc   isfinite isinf isnan isPressed ldexp ldexpf log
+syn keyword arduinoStdFunc   log10 log10f logf lrint lrintf lround lroundf map
+syn keyword arduinoStdFunc   max min move pow powf press radians random
+syn keyword arduinoStdFunc   randomSeed release releaseAll round roundf signbit
+syn keyword arduinoStdFunc   sin sinf sinh sinhf sq sqrt sqrtf tan tanf tanh
+syn keyword arduinoStdFunc   tanhf trunc truncf
 
-syn keyword arduinoModule Serial Serial1 Serial2 Serial3
+syn keyword arduinoType      _Bool _Complex _Imaginary array atomic_bool
+syn keyword arduinoType      atomic_char atomic_int atomic_llong atomic_long
+syn keyword arduinoType      atomic_schar atomic_short atomic_uchar atomic_uint
+syn keyword arduinoType      atomic_ullong atomic_ulong atomic_ushort boolean
+syn keyword arduinoType      byte char16_t char32_t complex NULL null PROGMEM
+syn keyword arduinoType      String word
 
 hi def link arduinoType Type
 hi def link arduinoConstant Constant

runtime/syntax/chicken.vim

@@ -1,6 +1,6 @@
 " Vim syntax file
 " Language: Scheme (CHICKEN)
-" Last Change: 2021 Jul 30
+" Last Change: 2021 Oct 01
 " Author: Evan Hanson <evhan@foldling.org>
 " Maintainer: Evan Hanson <evhan@foldling.org>
 " Repository: https://git.foldling.org/vim-scheme.git
@@ -37,7 +37,7 @@ if len(s:c)
   syn region c matchgroup=schemeComment start=/#>/ end=/<#/ contains=@c
 endif
 
-# SRFI 26
+" SRFI 26
 syn match schemeSyntax /\(([ \t\n]*\)\@<=\(cut\|cute\)\>/
 
 syn keyword schemeSyntax and-let*

runtime/syntax/css.vim

@@ -2,12 +2,12 @@
 " Language:     Cascading Style Sheets
 " Previous Contributor List:
 "               Jules Wang      <w.jq0722@gmail.com>
-"               Claudio Fleiner <claudio@fleiner.com> (Maintainer)
+"               Claudio Fleiner <claudio@fleiner.com>
 "               Yeti            (Add full CSS2, HTML4 support)
 "               Nikolai Weibull (Add CSS2 support)
-" URL:          https://github.com/jsit/css.vim
+" URL:          https://github.com/vim-language-dept/css-syntax.vim
 " Maintainer:   Jay Sitter <jay@jaysitter.com>
-" Last Change:  2019 Jul. 29
+" Last Change:  2021 Oct 15
 
 " quit when a syntax file was already loaded
 if !exists("main_syntax")
@@ -23,6 +23,8 @@ let s:cpo_save = &cpo
 set cpo&vim
 
 syn case ignore
+" Add dash to allowed keyword characters.
+syn iskeyword @,48-57,_,192-255,-
 
 " HTML4 tags
 syn keyword cssTagName abbr address area a b base
@@ -32,7 +34,7 @@ syn keyword cssTagName dfn div dl dt em fieldset form
 syn keyword cssTagName h1 h2 h3 h4 h5 h6 head hr html img i
 syn keyword cssTagName iframe input ins isindex kbd label legend li
 syn keyword cssTagName link map menu meta noscript ol optgroup
-syn keyword cssTagName option p param pre q s samp script small
+syn keyword cssTagName option p param picture pre q s samp script small
 syn keyword cssTagName span strong sub sup tbody td
 syn keyword cssTagName textarea tfoot th thead title tr ul u var
 syn keyword cssTagName object svg
@@ -127,7 +129,7 @@ syn region cssURL contained matchgroup=cssFunctionName start="\<\(uri\|url\|loca
 syn region cssFunction contained matchgroup=cssFunctionName start="\<\(var\|calc\)\s*(" end=")" contains=cssCustomProp,cssValue.*,cssFunction,cssColor,cssStringQ,cssStringQQ oneline
 syn region cssFunction contained matchgroup=cssFunctionName start="\<\(rgb\|clip\|attr\|counter\|rect\|cubic-bezier\|steps\)\s*(" end=")" oneline  contains=cssValueInteger,cssValueNumber,cssValueLength,cssFunctionComma
 syn region cssFunction contained matchgroup=cssFunctionName start="\<\(rgba\|hsl\|hsla\|color-stop\|from\|to\)\s*(" end=")" oneline  contains=cssColor,cssValueInteger,cssValueNumber,cssValueLength,cssFunctionComma,cssFunction
-syn region cssFunction contained matchgroup=cssFunctionName start="\<\(linear-\|radial-\)\=\gradient\s*(" end=")" oneline  contains=cssColor,cssValueInteger,cssValueNumber,cssValueLength,cssFunction,cssGradientAttr,cssFunctionComma
+syn region cssFunction contained matchgroup=cssFunctionName start="\<\(linear-\|radial-\|conic-\)\=\gradient\s*(" end=")" oneline  contains=cssColor,cssValueInteger,cssValueNumber,cssValueLength,cssFunction,cssGradientAttr,cssFunctionComma
 syn region cssFunction contained matchgroup=cssFunctionName start="\<\(matrix\(3d\)\=\|scale\(3d\|X\|Y\|Z\)\=\|translate\(3d\|X\|Y\|Z\)\=\|skew\(X\|Y\)\=\|rotate\(3d\|X\|Y\|Z\)\=\|perspective\)\s*(" end=")" oneline contains=cssValueInteger,cssValueNumber,cssValueLength,cssValueAngle,cssFunctionComma
 syn region cssFunction contained matchgroup=cssFunctionName start="\<\(blur\|brightness\|contrast\|drop-shadow\|grayscale\|hue-rotate\|invert\|opacity\|saturate\|sepia\)\s*(" end=")" oneline contains=cssValueInteger,cssValueNumber,cssValueLength,cssValueAngle,cssFunctionComma
 syn keyword cssGradientAttr contained top bottom left right cover center middle ellipse at
@@ -220,7 +222,7 @@ syn keyword cssFlexibleBoxProp contained order
 syn match cssFlexibleBoxAttr contained "\<\(row\|column\|wrap\)\(-reverse\)\=\>"
 syn keyword cssFlexibleBoxAttr contained nowrap stretch baseline center
 syn match cssFlexibleBoxAttr contained "\<flex\(-\(start\|end\)\)\=\>"
-syn match cssFlexibleBoxAttr contained "\<space\(-\(between\|around\)\)\=\>"
+syn match cssFlexibleBoxAttr contained "\<space\(-\(between\|around\|evenly\)\)\=\>"
 
 " CSS Fonts Module Level 3
 " http://www.w3.org/TR/css-fonts-3/
@@ -234,9 +236,7 @@ syn keyword cssFontAttr contained larger smaller
 syn match cssFontAttr contained "\<\(x\{1,2\}-\)\=\(large\|small\)\>"
 syn match cssFontAttr contained "\<small-\(caps\|caption\)\>"
 " font-family attributes
-syn match cssFontAttr contained "\<\(sans-\)\=serif\>"
-syn keyword cssFontAttr contained Antiqua Arial Black Book Charcoal Comic Courier Dingbats Gadget Geneva Georgia Grande Helvetica Impact Linotype Lucida MS Monaco Neue New Palatino Roboto Roman Symbol Tahoma Times Trebuchet Verdana Webdings Wingdings York Zapf
-syn keyword cssFontAttr contained cursive fantasy monospace
+syn keyword cssFontAttr contained sans-serif serif cursive fantasy monospace
 " font-feature-settings attributes
 syn keyword cssFontAttr contained on off
 " font-stretch attributes
@@ -283,6 +283,7 @@ syn match cssGridProp contained "\<grid\>"
 syn match cssGridProp contained "\<grid-template\(-\(columns\|rows\|areas\)\)\=\>"
 syn match cssGridProp contained "\<grid-\(column\|row\)\(-\(start\|end\|gap\)\)\=\>"
 syn match cssGridProp contained "\<grid-\(area\|gap\)\>"
+syn match cssGridProp contained "\<gap\>"
 syn match cssGridProp contained "\<grid-auto-\(flow\|rows\|columns\)\>"
 
 syn match cssHyerlinkProp contained "\<target\(-\(name\|new\|position\)\)\=\>"
@@ -294,6 +295,10 @@ syn match cssListAttr contained "\<\(decimal\(-leading-zero\)\=\|cjk-ideographic
 syn keyword cssListAttr contained disc circle square hebrew armenian georgian
 syn keyword cssListAttr contained inside outside
 
+" object-fit https://www.w3.org/TR/css-images-3/#the-object-fit
+syn match cssObjectProp contained "\<object-\(fit\|position\)\>"
+syn keyword cssObjectAttr contained fill contain cover scale-down
+
 syn keyword cssPositioningProp contained bottom clear clip display float left
 syn keyword cssPositioningProp contained position right top visibility
 syn match cssPositioningProp contained "\<z-index\>"
@@ -303,7 +308,7 @@ syn keyword cssPositioningAttr contained left right both
 syn match cssPositioningAttr contained "\<list-item\>"
 syn match cssPositioningAttr contained "\<inline\(-\(block\|box\|table\|grid\|flex\)\)\=\>"
 syn match cssPositioningAttr contained "\<flow\(-root\)\=\>"
-syn keyword cssPositioningAttr contained static relative absolute fixed subgrid
+syn keyword cssPositioningAttr contained static relative absolute fixed subgrid sticky
 
 syn keyword cssPrintAttr contained landscape portrait crop cross always
 
@@ -548,6 +553,7 @@ hi def link cssMarqueeProp cssProp
 hi def link cssMultiColumnProp cssProp
 hi def link cssPagedMediaProp cssProp
 hi def link cssPositioningProp cssProp
+hi def link cssObjectProp cssProp
 hi def link cssPrintProp cssProp
 hi def link cssRubyProp cssProp
 hi def link cssSpeechProp cssProp
@@ -581,6 +587,7 @@ hi def link cssMultiColumnAttr cssAttr
 hi def link cssPaddingAttr cssAttr
 hi def link cssPagedMediaAttr cssAttr
 hi def link cssPositioningAttr cssAttr
+hi def link cssObjectAttr cssAttr
 hi def link cssGradientAttr cssAttr
 hi def link cssPrintAttr cssAttr
 hi def link cssRubyAttr cssAttr

runtime/syntax/debchangelog.vim

@@ -3,7 +3,7 @@
 " Maintainer:  Debian Vim Maintainers
 " Former Maintainers: Gerfried Fuchs <alfie@ist.org>
 "                     Wichert Akkerman <wakkerma@debian.org>
-" Last Change: 2021 Aug 03
+" Last Change: 2021 Oct 19
 " URL: https://salsa.debian.org/vim-team/vim-debian/blob/master/syntax/debchangelog.vim
 
 " Standard syntax initialization
@@ -24,7 +24,8 @@ let s:supported = [
       \ 'jessie', 'stretch', 'buster', 'bullseye', 'bookworm',
       \ 'trixie', 'sid', 'rc-buggy',
       \
-      \ 'trusty', 'xenial', 'bionic', 'focal', 'hirsute', 'impish', 'devel'
+      \ 'trusty', 'xenial', 'bionic', 'focal', 'hirsute', 'impish', 'jammy',
+      \ 'devel'
       \ ]
 let s:unsupported = [
       \ 'frozen', 'buzz', 'rex', 'bo', 'hamm', 'slink', 'potato',

runtime/syntax/debsources.vim

@@ -2,7 +2,7 @@
 " Language:     Debian sources.list
 " Maintainer:   Debian Vim Maintainers
 " Former Maintainer: Matthijs Mohlmann <matthijs@cacholong.nl>
-" Last Change: 2021 Aug 03
+" Last Change: 2021 Oct 19
 " URL: https://salsa.debian.org/vim-team/vim-debian/blob/master/syntax/debsources.vim
 
 " Standard syntax initialization
@@ -26,7 +26,8 @@ let s:supported = [
       \ 'jessie', 'stretch', 'buster', 'bullseye', 'bookworm',
       \ 'trixie', 'sid', 'rc-buggy',
       \
-      \ 'trusty', 'xenial', 'bionic', 'focal', 'hirsute', 'impish', 'devel'
+      \ 'trusty', 'xenial', 'bionic', 'focal', 'hirsute', 'impish', 'jammy',
+      \ 'devel'
       \ ]
 let s:unsupported = [
       \ 'buzz', 'rex', 'bo', 'hamm', 'slink', 'potato',

runtime/syntax/go.vim

@@ -5,7 +5,7 @@
 " go.vim: Vim syntax file for Go.
 " Language:             Go
 " Maintainer:           Billie Cleek <bhcleek@gmail.com>
-" Latest Revision:      2021-06-26
+" Latest Revision:      2021-09-18
 " License:              BSD-style. See LICENSE file in source repository.
 " Repository:           https://github.com/fatih/vim-go
 
@@ -250,7 +250,7 @@ syn match       goDecimalError      "\<-\=\(_\(\d\+_*\)\+\|\([1-9]\d*_*\)\+__\(\
 syn match       goHexadecimalInt    "\<-\=0[xX]_\?\(\x\+_\?\)\+\>"
 syn match       goHexadecimalError  "\<-\=0[xX]_\?\(\x\+_\?\)*\(\([^ \t0-9A-Fa-f_)]\|__\)\S*\|_\)\>"
 syn match       goOctalInt          "\<-\=0[oO]\?_\?\(\o\+_\?\)\+\>"
-syn match       goOctalError        "\<-\=0[0-7oO_]*\(\([^ \t0-7oOxX_/)\]\}\:]\|[oO]\{2,\}\|__\)\S*\|_\|[oOxX]\)\>"
+syn match       goOctalError        "\<-\=0[0-7oO_]*\(\([^ \t0-7oOxX_/)\]\}\:;]\|[oO]\{2,\}\|__\)\S*\|_\|[oOxX]\)\>"
 syn match       goBinaryInt         "\<-\=0[bB]_\?\([01]\+_\?\)\+\>"
 syn match       goBinaryError       "\<-\=0[bB]_\?[01_]*\([^ \t01_)]\S*\|__\S*\|_\)\>"
 
@@ -430,7 +430,7 @@ endif
 
 " Build Constraints
 if s:HighlightBuildConstraints()
-  syn match   goBuildKeyword      display contained "+build"
+  syn match   goBuildKeyword      display contained "+build\|go:build"
   " Highlight the known values of GOOS, GOARCH, and other +build options.
   syn keyword goBuildDirectives   contained
         \ android darwin dragonfly freebsd linux nacl netbsd openbsd plan9

runtime/syntax/gprof.vim

@@ -1,15 +1,16 @@
 " Vim syntax file
 " Language: Syntax for Gprof Output
 " Maintainer: Dominique Pelle <dominique.pelle@gmail.com>
-" Last Change: 2021 Apr 08
+" Last Change: 2021 Sep 19
 
 " Quit when a syntax file was already loaded
 if exists("b:current_syntax")
-	finish
+  finish
 endif
 let s:keepcpo= &cpo
 set cpo&vim
 
+syn spell notoplevel
 syn case match
 syn sync minlines=100