patch 8.2.3885: arglist test fails

Problem:    Arglist test fails.
Solution:   Adjust for locking the arglist for ":all".

.github/CODEOWNERS

@@ -73,6 +73,8 @@ runtime/ftplugin/awk.vim		@dkearns
 runtime/ftplugin/basic.vim		@dkearns
 runtime/ftplugin/bst.vim		@tpope
 runtime/ftplugin/cfg.vim		@chrisbra
+runtime/ftplugin/clojure.vim		@axvr
+runtime/ftplugin/csh.vim		@dkearns
 runtime/ftplugin/css.vim		@dkearns
 runtime/ftplugin/cucumber.vim		@tpope
 runtime/ftplugin/eiffel.vim		@dkearns
@@ -87,16 +89,20 @@ runtime/ftplugin/gitsendemail.vim	@tpope
 runtime/ftplugin/gprof.vim		@dpelle
 runtime/ftplugin/haml.vim		@tpope
 runtime/ftplugin/hgcommit.vim		@k-takata
+runtime/ftplugin/i3config.vim		@hiqua
+runtime/ftplugin/indent.vim		@dkearns
 runtime/ftplugin/javascript.vim		@dkearns
 runtime/ftplugin/javascriptreact.vim	@dkearns
 runtime/ftplugin/kconfig.vim		@chrisbra
 runtime/ftplugin/liquid.vim		@tpope
+runtime/ftplugin/lua.vim		@dkearns
 runtime/ftplugin/m3build.vim		@dkearns
 runtime/ftplugin/m3quake.vim		@dkearns
 runtime/ftplugin/markdown.vim		@tpope
 runtime/ftplugin/matlab.vim		@cecamp
 runtime/ftplugin/meson.vim		@Liambeguin
 runtime/ftplugin/modula3.vim		@dkearns
+runtime/ftplugin/nginx.vim		@chr4
 runtime/ftplugin/nroff.vim		@a-vrma
 runtime/ftplugin/nsis.vim		@k-takata
 runtime/ftplugin/octave.vim		@dkearns
@@ -105,32 +111,57 @@ runtime/ftplugin/pbtxt.vim		@lakshayg
 runtime/ftplugin/pdf.vim		@tpope
 runtime/ftplugin/ps1.vim		@heaths
 runtime/ftplugin/ps1xml.vim		@heaths
+runtime/ftplugin/routeros.vim		@zainin
 runtime/ftplugin/ruby.vim		@tpope @dkearns
 runtime/ftplugin/sass.vim		@tpope
 runtime/ftplugin/scss.vim		@tpope
+runtime/ftplugin/solution.vim		@dkearns
 runtime/ftplugin/spec.vim		@ignatenkobrain
 runtime/ftplugin/systemverilog.vim	@Kocha
+runtime/ftplugin/tcsh.vim		@dkearns
 runtime/ftplugin/tidy.vim		@dkearns
 runtime/ftplugin/tmux.vim		@ericpruitt
+runtime/ftplugin/toml.vim		@averms
 runtime/ftplugin/typescript.vim		@dkearns
 runtime/ftplugin/typescriptreact.vim	@dkearns
 runtime/ftplugin/xml.vim		@chrisbra
 runtime/ftplugin/zsh.vim		@chrisbra
 runtime/indent/bst.vim			@tpope
+runtime/indent/cdl.vim			@dkearns
+runtime/indent/clojure.vim		@axvr
+runtime/indent/config.vim		@dkearns
+runtime/indent/css.vim			@dkearns
 runtime/indent/cucumber.vim		@tpope
+runtime/indent/d.vim			@dkearns
 runtime/indent/dosbatch.vim		@k-takata
+runtime/indent/dtd.vim			@dkearns
+runtime/indent/dylan.vim		@dkearns
+runtime/indent/elm.vim			@andys8
 runtime/indent/eruby.vim		@tpope @dkearns
+runtime/indent/eterm.vim		@dkearns
+runtime/indent/framescript.vim		@dkearns
 runtime/indent/gitconfig.vim		@tpope
 runtime/indent/haml.vim			@tpope
+runtime/indent/idlang.vim		@dkearns
+runtime/indent/ld.vim			@dkearns
 runtime/indent/liquid.vim		@tpope
+runtime/indent/make.vim			@dkearns
 runtime/indent/meson.vim		@Liambeguin
+runtime/indent/mma.vim			@dkearns
+runtime/indent/nginx.vim		@chr4
 runtime/indent/nsis.vim			@k-takata
+runtime/indent/occam.vim		@dkearns
+runtime/indent/postscr.vim		@dkearns
+runtime/indent/prolog.vim		@dkearns
 runtime/indent/ps1.vim			@heaths
+runtime/indent/readline.vim		@dkearns
 runtime/indent/ruby.vim			@AndrewRadev @dkearns
 runtime/indent/sass.vim			@tpope
 runtime/indent/scss.vim			@tpope
 runtime/indent/sh.vim			@chrisbra
 runtime/indent/systemverilog.vim	@Kocha
+runtime/indent/tcl.vim			@dkearns
+runtime/indent/tcsh.vim			@dkearns
 runtime/indent/teraterm.vim		@k-takata
 runtime/indent/xml.vim			@chrisbra
 runtime/indent/zsh.vim			@chrisbra
@@ -145,6 +176,7 @@ runtime/plugin/vimballPlugin.vim	@cecamp
 runtime/plugin/zipPlugin.vim		@cecamp
 runtime/syntax/aidl.vim			@dpelle
 runtime/syntax/amiga.vim		@cecamp
+runtime/syntax/arduino.vim		@johshoff
 runtime/syntax/asm.vim			@dkearns
 runtime/syntax/asmh8300.vim		@dkearns
 runtime/syntax/asterisk.vim		@jaunis
@@ -154,6 +186,7 @@ runtime/syntax/bst.vim			@tpope
 runtime/syntax/cabal.vim		@coot
 runtime/syntax/cabalconfig.vim		@coot
 runtime/syntax/cabalproject.vim		@coot
+runtime/syntax/clojure.vim		@axvr
 runtime/syntax/cs.vim			@nickspoons
 runtime/syntax/csh.vim			@cecamp
 runtime/syntax/cucumber.vim		@tpope
@@ -177,6 +210,8 @@ runtime/syntax/groff.vim		@jmarshall
 runtime/syntax/haml.vim			@tpope
 runtime/syntax/haskell.vim		@coot
 runtime/syntax/hgcommit.vim		@k-takata
+runtime/syntax/i3config.vim		@hiqua
+runtime/syntax/indent.vim		@dkearns
 runtime/syntax/kconfig.vim		@chrisbra
 runtime/syntax/less.vim			@genoma
 runtime/syntax/lex.vim			@cecamp
@@ -192,6 +227,7 @@ runtime/syntax/markdown.vim		@tpope
 runtime/syntax/meson.vim		@Liambeguin
 runtime/syntax/modula3.vim		@dkearns
 runtime/syntax/netrw.vim		@cecamp
+runtime/syntax/nginx.vim		@chr4
 runtime/syntax/nroff.vim		@jmarshall
 runtime/syntax/nsis.vim			@k-takata
 runtime/syntax/pascal.vim		@dkearns
@@ -204,6 +240,7 @@ runtime/syntax/ps1.vim			@heaths
 runtime/syntax/ps1xml.vim		@heaths
 runtime/syntax/psl.vim			@danielkho
 runtime/syntax/rc.vim			@chrisbra
+runtime/syntax/routeros.vim		@zainin
 runtime/syntax/rpcgen.vim		@cecamp
 runtime/syntax/ruby.vim			@dkearns
 runtime/syntax/sass.vim			@tpope
@@ -217,10 +254,12 @@ runtime/syntax/sshdconfig.vim		@Jakuje
 runtime/syntax/sudoers.vim		@e-kwsm
 runtime/syntax/systemverilog.vim	@Kocha
 runtime/syntax/tags.vim			@cecamp
+runtime/syntax/tcsh.vim			@dkearns
 runtime/syntax/teraterm.vim		@k-takata
 runtime/syntax/tex.vim			@cecamp
 runtime/syntax/tidy.vim			@dkearns
 runtime/syntax/tmux.vim			@ericpruitt
+runtime/syntax/toml.vim			@averms
 runtime/syntax/vim.vim			@cecamp
 runtime/syntax/wget.vim			@dkearns
 runtime/syntax/xbl.vim			@dkearns

.github/ISSUE_TEMPLATE/bug_report.md

@@ -1,34 +0,0 @@
----
-name: Bug report
-about: Create a report to help us improve Vim
-title: ''
-labels: ''
-
----
-
-_Instructions: Replace the template text and remove irrelevant text (including this line)_
-
-**Describe the bug**
-A clear and concise description of what the bug is.
-(Issues related to the runtime files should be reported to their maintainer, check the file header.)
-
-**To Reproduce**
-Detailed steps to reproduce the behavior:
-1. Run `vim --clean` (or `gvim --clean`, etc.)
-2. Edit `filename`
-3. Type '....'
-4. Describe the error
-
-**Expected behavior**
-A clear and concise description of what you expected to happen.
-
-**Screenshots**
-If applicable, copy/paste the text or add screenshots to help explain your problem.
-
-**Environment (please complete the following information):**
- - Vim version [e.g. 8.1.1234] (Or paste the result of `vim --version`.)
- - OS: [e.g. Ubuntu 18.04, Windows 10 1809, macOS 10.14]
- - Terminal: [e.g. GNOME Terminal, mintty, iTerm2, tmux, GNU screen] (Use GUI if you use the GUI.)
-
-**Additional context**
-Add any other context about the problem here.

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -0,0 +1,57 @@
+---
+name: Bug report
+description: Create a report to help us improve Vim.
+labels: [bug]
+
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Thanks for reporting issues of Vim!
+
+        If you want to report a security issue, instead of reporting it here
+        you can alternatively disclose it on
+        [huntr.dev](https://huntr.dev/bounties/disclose/?utm_campaign=vim%2Fvim&utm_medium=social&utm_source=github&target=https%3A%2F%2Fgithub.com%2Fvim%2Fvim).
+        They have rewards in the form of money, swag and CVEs.
+        
+        To make it easier for us to help you please enter detailed information below.
+  - type: textarea
+    attributes:
+      label: Steps to reproduce
+      placeholder: |
+        1. 
+        2. 
+        3. 
+        4. 
+    validations:
+      required: true
+  - type: textarea
+    attributes:
+      label: Expected behaviour
+      placeholder: A clear and concise description of what you expected to happen.
+    validations:
+      required: true
+  - type: input
+    attributes:
+      label: Version of Vim
+      description: >
+        Including patch level, use ":version" to see it [e.g. 8.2.1234]
+    validations:
+      required: true
+  - type: textarea
+    attributes:
+      label: Environment
+      description: >
+        OS [e.g. Ubuntu 21.10], terminal [e.g. GNOME Terminal 3.38.1], value of $TERM, shell [e.g. bash 5.1.8]; anything that might matter
+      placeholder: |
+        Operating system:
+        Terminal:
+        Value of $TERM:
+        Shell:
+    validations:
+      required: true
+  - type: textarea
+    attributes:
+      label: Logs and stack traces
+      placeholder: Insert log or other text here (if necessary)
+      render: shell

.github/workflows/ci.yml

@@ -40,6 +40,7 @@ jobs:
             compiler: gcc
             coverage: true
             extra: testgui
+            uchar: true
           - features: huge
             compiler: clang
             extra: asan
@@ -74,16 +75,16 @@ jobs:
             libtool-bin \
             libsodium-dev
 
-      - name: Install clang-11
+      - name: Install clang-13
         if: matrix.compiler == 'clang'
         run: |
           wget -O - https://apt.llvm.org/llvm-snapshot.gpg.key | sudo apt-key add -
           . /etc/lsb-release
-          sudo add-apt-repository -y "deb http://apt.llvm.org/${DISTRIB_CODENAME}/ llvm-toolchain-${DISTRIB_CODENAME}-11 main"
-          sudo apt-get install -y clang-11
-          sudo update-alternatives --install /usr/bin/clang clang /usr/bin/clang-11 100
-          sudo update-alternatives --set clang /usr/bin/clang-11
-          sudo update-alternatives --install /usr/bin/llvm-cov llvm-cov /usr/bin/llvm-cov-11 100
+          sudo add-apt-repository -y "deb http://apt.llvm.org/${DISTRIB_CODENAME}/ llvm-toolchain-${DISTRIB_CODENAME}-13 main"
+          sudo apt-get install -y clang-13 llvm-13
+          sudo update-alternatives --install /usr/bin/clang clang /usr/bin/clang-13 100
+          sudo update-alternatives --set clang /usr/bin/clang-13
+          sudo update-alternatives --install /usr/bin/llvm-cov llvm-cov /usr/bin/llvm-cov-13 100
 
       - name: Set up environment
         run: |
@@ -111,10 +112,14 @@ jobs:
             ;;
           esac
 
+          CFLAGS=""
           if ${{ matrix.coverage == true }}; then
-            echo "CFLAGS=--coverage -DUSE_GCOV_FLUSH"
+            CFLAGS="$CFLAGS --coverage -DUSE_GCOV_FLUSH"
             echo "LDFLAGS=--coverage"
           fi
+          if ${{ matrix.uchar == true }}; then
+            CFLAGS="$CFLAGS -funsigned-char"
+          fi
           if ${{ contains(matrix.extra, 'testgui') }}; then
             echo "TEST=-C src testgui"
           fi
@@ -130,6 +135,7 @@ jobs:
           if ${{ contains(matrix.extra, 'vimtags') }}; then
             echo "TEST=-C runtime/doc vimtags VIMEXE=../../${SRCDIR}/vim"
           fi
+          echo "CFLAGS=$CFLAGS"
           ) >> $GITHUB_ENV
 
       - name: Set up system
@@ -182,6 +188,10 @@ jobs:
           # Append various warning flags to CFLAGS.
           sed -i -f ci/config.mk.sed ${SRCDIR}/auto/config.mk
           sed -i -f ci/config.mk.${CC}.sed ${SRCDIR}/auto/config.mk
+          if [[ ${CC} = clang ]]; then
+            # Suppress some warnings produced by clang 12 and later.
+            sed -i -f ci/config.mk.clang-12.sed ${SRCDIR}/auto/config.mk
+          fi
 
       - name: Build
         if: (!contains(matrix.extra, 'unittests'))
@@ -224,7 +234,7 @@ jobs:
         if: contains(matrix.extra, 'asan') && !cancelled()
         run: |
           for f in $(grep -lR '#[[:digit:]]* *0x[[:digit:]a-fA-F]*' "${LOG_DIR}"); do
-            asan_symbolize-11 -l "$f"
+            asan_symbolize-13 -l "$f"
             false # in order to fail a job
           done
 
@@ -245,7 +255,7 @@ jobs:
     runs-on: macos-latest
 
     env:
-      CC: ${{ matrix.compiler }}
+      CC: clang
       TEST: test
       SRCDIR: ./src
       LEAK_CFLAGS: -DEXITFREE
@@ -254,8 +264,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        features: [tiny, huge]
-        compiler: [clang, gcc]
+        features: [tiny, normal, huge]
 
     steps:
       - uses: actions/checkout@v2
@@ -276,6 +285,8 @@ jobs:
             echo "TEST=testtiny"
             echo "CONFOPT=--disable-gui"
             ;;
+          normal)
+            ;;
           huge)
             echo "CONFOPT=--enable-perlinterp --enable-python3interp --enable-rubyinterp --enable-luainterp --enable-tclinterp"
             ;;
@@ -290,6 +301,10 @@ jobs:
           sed -i.bak -f ci/config.mk.sed ${SRCDIR}/auto/config.mk
           # On macOS, the entity of gcc is clang.
           sed -i.bak -f ci/config.mk.clang.sed ${SRCDIR}/auto/config.mk
+          # Suppress some warnings produced by clang 12 and later.
+          if clang --version | grep -qs 'Apple clang version \(1[3-9]\|[2-9]\)\.'; then
+            sed -i.bak -f ci/config.mk.clang-12.sed ${SRCDIR}/auto/config.mk
+          fi
 
       - name: Build
         env:

Filelist

@@ -7,6 +7,8 @@ SRC_ALL =	\
 		.coveralls.yml \
 		.gitattributes \
 		.github/CODEOWNERS \
+		.github/ISSUE_TEMPLATE/bug_report.yml \
+		.github/ISSUE_TEMPLATE/feature_request.md \
 		.github/workflows/ci.yml \
 		.github/workflows/codeql-analysis.yml \
 		.github/workflows/coverity.yml \
@@ -142,7 +144,7 @@ SRC_ALL =	\
 		src/tag.c \
 		src/term.c \
 		src/terminal.c \
-		src/term.h \
+		src/termdefs.h \
 		src/termlib.c \
 		src/testing.c \
 		src/textformat.c \
@@ -158,8 +160,11 @@ SRC_ALL =	\
 		src/version.h \
 		src/vim.h \
 		src/vim9.h \
+		src/vim9cmds.c \
 		src/vim9compile.c \
 		src/vim9execute.c \
+		src/vim9expr.c \
+		src/vim9instr.c \
 		src/vim9script.c \
 		src/vim9type.c \
 		src/viminfo.c \
@@ -317,8 +322,11 @@ SRC_ALL =	\
 		src/proto/usercmd.pro \
 		src/proto/userfunc.pro \
 		src/proto/version.pro \
+		src/proto/vim9cmds.pro \
 		src/proto/vim9compile.pro \
 		src/proto/vim9execute.pro \
+		src/proto/vim9expr.pro \
+		src/proto/vim9instr.pro \
 		src/proto/vim9script.pro \
 		src/proto/vim9type.pro \
 		src/proto/viminfo.pro \
@@ -376,6 +384,7 @@ SRC_ALL =	\
 		src/libvterm/t/30state_pen.test \
 		src/libvterm/t/31state_rep.test \
 		src/libvterm/t/32state_flow.test \
+		src/libvterm/t/40state_selection.test \
 		src/libvterm/t/60screen_ascii.test \
 		src/libvterm/t/61screen_unicode.test \
 		src/libvterm/t/62screen_damage.test \
@@ -798,6 +807,7 @@ RT_SCRIPTS =	\
 		runtime/autoload/xml/*.vim \
 		runtime/colors/*.vim \
 		runtime/colors/README.txt \
+		runtime/colors/lists/*.vim \
 		runtime/colors/tools/*.vim \
 		runtime/compiler/*.vim \
 		runtime/compiler/README.txt \
@@ -850,7 +860,6 @@ RT_AMI_DOS =	\
 # DOS runtime (also in the extra archive)
 RT_DOS =	\
 		README_dos.txt \
-		runtime/rgb.txt \
 		vimtutor.bat \
 
 # DOS runtime without CR-LF translation (also in the extra archive)

READMEdir/README_extra.txt

@@ -26,7 +26,6 @@ src/os_win32.*		Files for the Win32 port.
 src/gui_w32.*		Files for the Win32 GUI.
 src/gui_w48.*		Files for the Win32 and Win16 GUI.
 src/Make_mvc.mak	MS Visual C++ makefile for the Win32 GUI.
-runtime/rgb.txt		File with color definitions for the Win32 GUI.
 
 src/if_ole.*		OLE automation interface, for MS Windows 95 and NT.
 

ci/config.mk.clang-12.sed

@@ -0,0 +1,3 @@
+# Clang 12 (or Apple clang 13) and later makes a warning '-Wcompound-token-split-by-macro' enable by default.
+/^PERL_CFLAGS[[:blank:]]*=/s/$/ -Wno-error=compound-token-split-by-macro/
+/^RUBY_CFLAGS[[:blank:]]*=/s/$/ -Wno-error=compound-token-split-by-macro/

nsis/gvim.nsi

@@ -357,7 +357,6 @@ Section "$(str_section_exe)" id_section_exe
 	File ..\README.txt
 	File ..\uninstall.txt
 	File ${VIMRT}\*.vim
-	File ${VIMRT}\rgb.txt
 
 	File ${VIMTOOLS}\diff.exe
 	File ${VIMTOOLS}\winpty${BIT}.dll
@@ -367,6 +366,8 @@ Section "$(str_section_exe)" id_section_exe
 	File ${VIMRT}\colors\*.*
 	SetOutPath $0\colors\tools
 	File ${VIMRT}\colors\tools\*.*
+	SetOutPath $0\colors\lists
+	File ${VIMRT}\colors\lists\*.*
 
 	SetOutPath $0\compiler
 	File ${VIMRT}\compiler\*.*

runtime/autoload/dist/ft.vim

@@ -1,7 +1,7 @@
 " Vim functions for file type detection
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2020 Aug 17
+" Last Change:	2021 Dec 17
 
 " These functions are moved here from runtime/filetype.vim to make startup
 " faster.
@@ -219,6 +219,23 @@ func dist#ft#FTe()
   endif
 endfunc
 
+" Distinguish between Forth and F#.
+" Provided by Doug Kearns.
+func dist#ft#FTfs()
+  if exists("g:filetype_fs")
+    exe "setf " . g:filetype_fs
+  else
+    let line = getline(nextnonblank(1))
+    " comments and colon definitions
+    if line =~ '^\s*\.\=( ' || line =~ '^\s*\\G\= ' || line =~ '^\\$'
+	  \ || line =~ '^\s*: \S'
+      setf forth
+    else
+      setf fsharp
+    endif
+  endif
+endfunc
+
 " Distinguish between HTML, XHTML and Django
 func dist#ft#FThtml()
   let n = 1
@@ -272,6 +289,8 @@ func dist#ft#FTm()
   " excluding end(for|function|if|switch|while) common to Murphi
   let octave_block_terminators = '\<end\%(_try_catch\|classdef\|enumeration\|events\|methods\|parfor\|properties\)\>'
 
+  let objc_preprocessor = '^\s*#\s*\%(import\|include\|define\|if\|ifn\=def\|undef\|line\|error\|pragma\)\>'
+
   let n = 1
   let saw_comment = 0 " Whether we've seen a multiline comment leader.
   while n < 100
@@ -282,7 +301,7 @@ func dist#ft#FTm()
       " anything more definitive.
       let saw_comment = 1
     endif
-    if line =~ '^\s*\(#\s*\(include\|import\)\>\|@import\>\|//\)'
+    if line =~ '^\s*//' || line =~ '^\s*@import\>' || line =~ objc_preprocessor
       setf objc
       return
     endif
@@ -792,6 +811,23 @@ func dist#ft#Redif()
   endwhile
 endfunc
 
+" This function is called for all files under */debian/patches/*, make sure not
+" to non-dep3patch files, such as README and other text files.
+func dist#ft#Dep3patch()
+  if expand('%:t') ==# 'series'
+    return
+  endif
+
+  for ln in getline(1, 100)
+    if ln =~# '^\%(Description\|Subject\|Origin\|Bug\|Forwarded\|Author\|From\|Reviewed-by\|Acked-by\|Last-Updated\|Applied-Upstream\):'
+      setf dep3patch
+      return
+    elseif ln =~# '^---'
+      " end of headers found. stop processing
+      return
+    endif
+  endfor
+endfunc
 
 " Restore 'cpoptions'
 let &cpo = s:cpo_save

runtime/autoload/netrw.vim

@@ -1751,7 +1751,8 @@ fun! s:NetrwOptionsSafe(islocal)
   if &cpo =~ 'a' | call s:NetrwSetSafeSetting("&cpo",substitute(&cpo,'a','','g')) | endif
   if &cpo =~ 'A' | call s:NetrwSetSafeSetting("&cpo",substitute(&cpo,'A','','g')) | endif
   setl fo=nroql2
-  call s:NetrwSetSafeSetting("&go","begmr")
+  " call s:NetrwSetSafeSetting("&go","begmr")
+  if &go =~ '\ca' | call s:NetrwSetSafeSetting("&go",substitute(&go,'\ca','','g')) | endif
   call s:NetrwSetSafeSetting("&l:hid",0)
   call s:NetrwSetSafeSetting("&l:im",0)
   setl isk+=@ isk+=* isk+=/

runtime/autoload/zip.vim

@@ -1,7 +1,7 @@
 " zip.vim: Handles browsing zipfiles
 "            AUTOLOAD PORTION
-" Date:		Jan 07, 2020
-" Version:	31
+" Date:		Nov 08, 2021
+" Version:	32
 " Maintainer:	Charles E Campbell <NcampObell@SdrPchip.AorgM-NOSPAM>
 " License:	Vim License  (see vim's :help license)
 " Copyright:    Copyright (C) 2005-2019 Charles E. Campbell {{{1
@@ -20,7 +20,7 @@
 if &cp || exists("g:loaded_zip")
  finish
 endif
-let g:loaded_zip= "v31"
+let g:loaded_zip= "v32"
 if v:version < 702
  echohl WarningMsg
  echo "***warning*** this version of zip needs vim 7.2 or later"
@@ -115,7 +115,13 @@ fun! zip#Browse(zipfile)
   setlocal bufhidden=hide
   setlocal nobuflisted
   setlocal nowrap
-  set ft=tar
+
+  " Oct 12, 2021: need to re-use Bram's syntax/tar.vim.
+  " Setting the filetype to zip doesn't do anything (currently),
+  " but it is perhaps less confusing to curious perusers who do
+  " a :echo &ft
+  setf zip
+  run! syntax/tar.vim
 
   " give header
   call append(0, ['" zip.vim version '.g:loaded_zip,
@@ -187,8 +193,8 @@ fun! s:ZipBrowseSelect()
    wincmd _
   endif
   let s:zipfile_{winnr()}= curfile
-"  call Decho("exe e ".fnameescape("zipfile:".zipfile.'::'.fname))
-  exe "noswapfile e ".fnameescape("zipfile:".zipfile.'::'.fname)
+"  call Decho("exe e ".fnameescape("zipfile://".zipfile.'::'.fname))
+  exe "noswapfile e ".fnameescape("zipfile://".zipfile.'::'.fname)
   filetype detect
 
   let &report= repkeep
@@ -203,11 +209,11 @@ fun! zip#Read(fname,mode)
   set report=10
 
   if has("unix")
-   let zipfile = substitute(a:fname,'zipfile:\(.\{-}\)::[^\\].*$','\1','')
-   let fname   = substitute(a:fname,'zipfile:.\{-}::\([^\\].*\)$','\1','')
+   let zipfile = substitute(a:fname,'zipfile://\(.\{-}\)::[^\\].*$','\1','')
+   let fname   = substitute(a:fname,'zipfile://.\{-}::\([^\\].*\)$','\1','')
   else
-   let zipfile = substitute(a:fname,'^.\{-}zipfile:\(.\{-}\)::[^\\].*$','\1','')
-   let fname   = substitute(a:fname,'^.\{-}zipfile:.\{-}::\([^\\].*\)$','\1','')
+   let zipfile = substitute(a:fname,'^.\{-}zipfile://\(.\{-}\)::[^\\].*$','\1','')
+   let fname   = substitute(a:fname,'^.\{-}zipfile://.\{-}::\([^\\].*\)$','\1','')
    let fname   = substitute(fname, '[', '[[]', 'g')
   endif
 "  call Decho("zipfile<".zipfile.">")
@@ -224,7 +230,7 @@ fun! zip#Read(fname,mode)
 
   " the following code does much the same thing as
   "   exe "keepj sil! r! ".g:zip_unzipcmd." -p -- ".s:Escape(zipfile,1)." ".s:Escape(fnameescape(fname),1)
-  " but allows zipfile:... entries in quickfix lists
+  " but allows zipfile://... entries in quickfix lists
   let temp = tempname()
 "  call Decho("using temp file<".temp.">")
   let fn   = expand('%:p')
@@ -296,11 +302,11 @@ fun! zip#Write(fname)
 "  call Decho("current directory now: ".getcwd())
 
   if has("unix")
-   let zipfile = substitute(a:fname,'zipfile:\(.\{-}\)::[^\\].*$','\1','')
-   let fname   = substitute(a:fname,'zipfile:.\{-}::\([^\\].*\)$','\1','')
+   let zipfile = substitute(a:fname,'zipfile://\(.\{-}\)::[^\\].*$','\1','')
+   let fname   = substitute(a:fname,'zipfile://.\{-}::\([^\\].*\)$','\1','')
   else
-   let zipfile = substitute(a:fname,'^.\{-}zipfile:\(.\{-}\)::[^\\].*$','\1','')
-   let fname   = substitute(a:fname,'^.\{-}zipfile:.\{-}::\([^\\].*\)$','\1','')
+   let zipfile = substitute(a:fname,'^.\{-}zipfile://\(.\{-}\)::[^\\].*$','\1','')
+   let fname   = substitute(a:fname,'^.\{-}zipfile://.\{-}::\([^\\].*\)$','\1','')
   endif
 "  call Decho("zipfile<".zipfile.">")
 "  call Decho("fname  <".fname.">")

runtime/colors/README.txt

@@ -87,4 +87,5 @@ please check the following items:
 - In the GUI, is it easy to find the cursor, also in a file with lots of
   syntax highlighting?
 - Do not use hard coded escape sequences, these will not work in other
-  terminals.  Always use color names or #RRGGBB for the GUI.
+  terminals.  Always use color names or #RRGGBB for the GUI. See v:colornames
+  for details on how to define your own color names.

runtime/colors/lists/csscolors.vim

@@ -0,0 +1,166 @@
+" Maintainer:  Drew Vogel <dvogel@sidejump.org>
+" Last Change: 2021 Jul 25
+
+" Similar in spirit to rgb.txt, this plugin establishes a human-friendly name
+" for every color listed in the CSS standard:
+"
+" https://www.w3.org/TR/css-color-3/
+
+let s:keepcpo= &cpo
+set cpo&vim
+
+call extend(v:colornames, {
+			\ 'css_black': '#000000',
+			\ 'css_silver': '#c0c0c0',
+			\ 'css_gray': '#808080',
+			\ 'css_white': '#FFFFFF',
+			\ 'css_maroon': '#800000',
+			\ 'css_red': '#FF0000',
+			\ 'css_purple': '#800080',
+			\ 'css_fuchsia': '#FF00FF',
+			\ 'css_green': '#008000',
+			\ 'css_lime': '#00FF00',
+			\ 'css_olive': '#808000',
+			\ 'css_yellow': '#FFFF00',
+			\ 'css_navy': '#000080',
+			\ 'css_blue': '#0000FF',
+			\ 'css_teal': '#008080',
+			\ 'css_aqua': '#00FFFF',
+			\
+			\ 'css_aliceblue': '#f0f8ff',
+			\ 'css_antiquewhite': '#faebd7',
+			\ 'css_aquamarine': '#7fffd4',
+			\ 'css_azure': '#f0ffff',
+			\ 'css_beige': '#f5f5dc',
+			\ 'css_bisque': '#ffe4c4',
+			\ 'css_blanchedalmond': '#ffebcd',
+			\ 'css_blueviolet': '#8a2be2',
+			\ 'css_brown': '#a52a2a',
+			\ 'css_burlywood': '#deb887',
+			\ 'css_cadetblue': '#5f9ea0',
+			\ 'css_chartreuse': '#7fff00',
+			\ 'css_chocolate': '#d2691e',
+			\ 'css_coral': '#ff7f50',
+			\ 'css_cornflowerblue': '#6495ed',
+			\ 'css_cornsilk': '#fff8dc',
+			\ 'css_crimson': '#dc143c',
+			\ 'css_cyan': '#00ffff',
+			\ 'css_darkblue': '#00008b',
+			\ 'css_darkcyan': '#008b8b',
+			\ 'css_darkgoldenrod': '#b8860b',
+			\ 'css_darkgray': '#a9a9a9',
+			\ 'css_darkgreen': '#006400',
+			\ 'css_darkgrey': '#a9a9a9',
+			\ 'css_darkkhaki': '#bdb76b',
+			\ 'css_darkmagenta': '#8b008b',
+			\ 'css_darkolivegreen': '#556b2f',
+			\ 'css_darkorange': '#ff8c00',
+			\ 'css_darkorchid': '#9932cc',
+			\ 'css_darkred': '#8b0000',
+			\ 'css_darksalmon': '#e9967a',
+			\ 'css_darkseagreen': '#8fbc8f',
+			\ 'css_darkslateblue': '#483d8b',
+			\ 'css_darkslategray': '#2f4f4f',
+			\ 'css_darkslategrey': '#2f4f4f',
+			\ 'css_darkturquoise': '#00ced1',
+			\ 'css_darkviolet': '#9400d3',
+			\ 'css_deeppink': '#ff1493',
+			\ 'css_deepskyblue': '#00bfff',
+			\ 'css_dimgray': '#696969',
+			\ 'css_dimgrey': '#696969',
+			\ 'css_dodgerblue': '#1e90ff',
+			\ 'css_firebrick': '#b22222',
+			\ 'css_floralwhite': '#fffaf0',
+			\ 'css_forestgreen': '#228b22',
+			\ 'css_gainsboro': '#dcdcdc',
+			\ 'css_ghostwhite': '#f8f8ff',
+			\ 'css_gold': '#ffd700',
+			\ 'css_goldenrod': '#daa520',
+			\ 'css_greenyellow': '#adff2f',
+			\ 'css_grey': '#808080',
+			\ 'css_honeydew': '#f0fff0',
+			\ 'css_hotpink': '#ff69b4',
+			\ 'css_indianred': '#cd5c5c',
+			\ 'css_indigo': '#4b0082',
+			\ 'css_ivory': '#fffff0',
+			\ 'css_khaki': '#f0e68c',
+			\ 'css_lavender': '#e6e6fa',
+			\ 'css_lavenderblush': '#fff0f5',
+			\ 'css_lawngreen': '#7cfc00',
+			\ 'css_lemonchiffon': '#fffacd',
+			\ 'css_lightblue': '#add8e6',
+			\ 'css_lightcoral': '#f08080',
+			\ 'css_lightcyan': '#e0ffff',
+			\ 'css_lightgoldenrodyellow': '#fafad2',
+			\ 'css_lightgray': '#d3d3d3',
+			\ 'css_lightgreen': '#90ee90',
+			\ 'css_lightgrey': '#d3d3d3',
+			\ 'css_lightpink': '#ffb6c1',
+			\ 'css_lightsalmon': '#ffa07a',
+			\ 'css_lightseagreen': '#20b2aa',
+			\ 'css_lightskyblue': '#87cefa',
+			\ 'css_lightslategray': '#778899',
+			\ 'css_lightslategrey': '#778899',
+			\ 'css_lightsteelblue': '#b0c4de',
+			\ 'css_lightyellow': '#ffffe0',
+			\ 'css_limegreen': '#32cd32',
+			\ 'css_linen': '#faf0e6',
+			\ 'css_magenta': '#ff00ff',
+			\ 'css_mediumaquamarine': '#66cdaa',
+			\ 'css_mediumblue': '#0000cd',
+			\ 'css_mediumorchid': '#ba55d3',
+			\ 'css_mediumpurple': '#9370db',
+			\ 'css_mediumseagreen': '#3cb371',
+			\ 'css_mediumslateblue': '#7b68ee',
+			\ 'css_mediumspringgreen': '#00fa9a',
+			\ 'css_mediumturquoise': '#48d1cc',
+			\ 'css_mediumvioletred': '#c71585',
+			\ 'css_midnightblue': '#191970',
+			\ 'css_mintcream': '#f5fffa',
+			\ 'css_mistyrose': '#ffe4e1',
+			\ 'css_moccasin': '#ffe4b5',
+			\ 'css_navajowhite': '#ffdead',
+			\ 'css_oldlace': '#fdf5e6',
+			\ 'css_olivedrab': '#6b8e23',
+			\ 'css_orange': '#ffa500',
+			\ 'css_orangered': '#ff4500',
+			\ 'css_orchid': '#da70d6',
+			\ 'css_palegoldenrod': '#eee8aa',
+			\ 'css_palegreen': '#98fb98',
+			\ 'css_paleturquoise': '#afeeee',
+			\ 'css_palevioletred': '#db7093',
+			\ 'css_papayawhip': '#ffefd5',
+			\ 'css_peachpuff': '#ffdab9',
+			\ 'css_peru': '#cd853f',
+			\ 'css_pink': '#ffc0cb',
+			\ 'css_plum': '#dda0dd',
+			\ 'css_powderblue': '#b0e0e6',
+			\ 'css_rosybrown': '#bc8f8f',
+			\ 'css_royalblue': '#4169e1',
+			\ 'css_saddlebrown': '#8b4513',
+			\ 'css_salmon': '#fa8072',
+			\ 'css_sandybrown': '#f4a460',
+			\ 'css_seagreen': '#2e8b57',
+			\ 'css_seashell': '#fff5ee',
+			\ 'css_sienna': '#a0522d',
+			\ 'css_skyblue': '#87ceeb',
+			\ 'css_slateblue': '#6a5acd',
+			\ 'css_slategray': '#708090',
+			\ 'css_slategrey': '#708090',
+			\ 'css_snow': '#fffafa',
+			\ 'css_springgreen': '#00ff7f',
+			\ 'css_steelblue': '#4682b4',
+			\ 'css_tan': '#d2b48c',
+			\ 'css_thistle': '#d8bfd8',
+			\ 'css_tomato': '#ff6347',
+			\ 'css_turquoise': '#40e0d0',
+			\ 'css_violet': '#ee82ee',
+			\ 'css_wheat': '#f5deb3',
+			\ 'css_whitesmoke': '#f5f5f5',
+			\ 'css_yellowgreen': '#9acd32',
+			\ }, 'keep')
+
+let &cpo= s:keepcpo
+unlet s:keepcpo
+
+"vim: sw=4

runtime/colors/lists/default.vim

@@ -0,0 +1,801 @@
+" Maintainer:  Drew Vogel <dvogel@sidejump.org>
+" Last Change: 2021 Jul 25
+"
+" Replaced rgb.txt as the source of de facto standard color names. This is
+" sourced each time the colorscheme command is run. It is also sourced each
+" time the highlight command fails to recognize a gui color. You can override
+" these colors by introducing a new colors/lists/default.vim file earlier in
+" the runtimepath.
+
+let s:keepcpo= &cpo
+set cpo&vim
+
+call extend(v:colornames, {
+			\ 'snow': '#fffafa',
+			\ 'ghost white': '#f8f8ff',
+			\ 'ghostwhite': '#f8f8ff',
+			\ 'white smoke': '#f5f5f5',
+			\ 'whitesmoke': '#f5f5f5',
+			\ 'gainsboro': '#dcdcdc',
+			\ 'floral white': '#fffaf0',
+			\ 'floralwhite': '#fffaf0',
+			\ 'old lace': '#fdf5e6',
+			\ 'oldlace': '#fdf5e6',
+			\ 'linen': '#faf0e6',
+			\ 'antique white': '#faebd7',
+			\ 'antiquewhite': '#faebd7',
+			\ 'papaya whip': '#ffefd5',
+			\ 'papayawhip': '#ffefd5',
+			\ 'blanched almond': '#ffebcd',
+			\ 'blanchedalmond': '#ffebcd',
+			\ 'bisque': '#ffe4c4',
+			\ 'peach puff': '#ffdab9',
+			\ 'peachpuff': '#ffdab9',
+			\ 'navajo white': '#ffdead',
+			\ 'navajowhite': '#ffdead',
+			\ 'moccasin': '#ffe4b5',
+			\ 'cornsilk': '#fff8dc',
+			\ 'ivory': '#fffff0',
+			\ 'lemon chiffon': '#fffacd',
+			\ 'lemonchiffon': '#fffacd',
+			\ 'seashell': '#fff5ee',
+			\ 'honeydew': '#f0fff0',
+			\ 'mint cream': '#f5fffa',
+			\ 'mintcream': '#f5fffa',
+			\ 'azure': '#f0ffff',
+			\ 'alice blue': '#f0f8ff',
+			\ 'aliceblue': '#f0f8ff',
+			\ 'lavender': '#e6e6fa',
+			\ 'lavender blush': '#fff0f5',
+			\ 'lavenderblush': '#fff0f5',
+			\ 'misty rose': '#ffe4e1',
+			\ 'mistyrose': '#ffe4e1',
+			\ 'white': '#ffffff',
+			\ 'black': '#000000',
+			\ 'dark slate gray': '#2f4f4f',
+			\ 'darkslategray': '#2f4f4f',
+			\ 'dark slate grey': '#2f4f4f',
+			\ 'darkslategrey': '#2f4f4f',
+			\ 'dim gray': '#696969',
+			\ 'dimgray': '#696969',
+			\ 'dim grey': '#696969',
+			\ 'dimgrey': '#696969',
+			\ 'slate gray': '#708090',
+			\ 'slategray': '#708090',
+			\ 'slate grey': '#708090',
+			\ 'slategrey': '#708090',
+			\ 'light slate gray': '#778899',
+			\ 'lightslategray': '#778899',
+			\ 'light slate grey': '#778899',
+			\ 'lightslategrey': '#778899',
+			\ 'gray': '#bebebe',
+			\ 'grey': '#bebebe',
+			\ 'x11 gray': '#bebebe',
+			\ 'x11gray': '#bebebe',
+			\ 'x11 grey': '#bebebe',
+			\ 'x11grey': '#bebebe',
+			\ 'web gray': '#808080',
+			\ 'webgray': '#808080',
+			\ 'web grey': '#808080',
+			\ 'webgrey': '#808080',
+			\ 'light grey': '#d3d3d3',
+			\ 'lightgrey': '#d3d3d3',
+			\ 'light gray': '#d3d3d3',
+			\ 'lightgray': '#d3d3d3',
+			\ 'midnight blue': '#191970',
+			\ 'midnightblue': '#191970',
+			\ 'navy': '#000080',
+			\ 'navy blue': '#000080',
+			\ 'navyblue': '#000080',
+			\ 'cornflower blue': '#6495ed',
+			\ 'cornflowerblue': '#6495ed',
+			\ 'dark slate blue': '#483d8b',
+			\ 'darkslateblue': '#483d8b',
+			\ 'slate blue': '#6a5acd',
+			\ 'slateblue': '#6a5acd',
+			\ 'medium slate blue': '#7b68ee',
+			\ 'mediumslateblue': '#7b68ee',
+			\ 'light slate blue': '#8470ff',
+			\ 'lightslateblue': '#8470ff',
+			\ 'medium blue': '#0000cd',
+			\ 'mediumblue': '#0000cd',
+			\ 'royal blue': '#4169e1',
+			\ 'royalblue': '#4169e1',
+			\ 'blue': '#0000ff',
+			\ 'dodger blue': '#1e90ff',
+			\ 'dodgerblue': '#1e90ff',
+			\ 'deep sky blue': '#00bfff',
+			\ 'deepskyblue': '#00bfff',
+			\ 'sky blue': '#87ceeb',
+			\ 'skyblue': '#87ceeb',
+			\ 'light sky blue': '#87cefa',
+			\ 'lightskyblue': '#87cefa',
+			\ 'steel blue': '#4682b4',
+			\ 'steelblue': '#4682b4',
+			\ 'light steel blue': '#b0c4de',
+			\ 'lightsteelblue': '#b0c4de',
+			\ 'light blue': '#add8e6',
+			\ 'lightblue': '#add8e6',
+			\ 'powder blue': '#b0e0e6',
+			\ 'powderblue': '#b0e0e6',
+			\ 'pale turquoise': '#afeeee',
+			\ 'paleturquoise': '#afeeee',
+			\ 'dark turquoise': '#00ced1',
+			\ 'darkturquoise': '#00ced1',
+			\ 'medium turquoise': '#48d1cc',
+			\ 'mediumturquoise': '#48d1cc',
+			\ 'turquoise': '#40e0d0',
+			\ 'cyan': '#00ffff',
+			\ 'aqua': '#00ffff',
+			\ 'light cyan': '#e0ffff',
+			\ 'lightcyan': '#e0ffff',
+			\ 'cadet blue': '#5f9ea0',
+			\ 'cadetblue': '#5f9ea0',
+			\ 'medium aquamarine': '#66cdaa',
+			\ 'mediumaquamarine': '#66cdaa',
+			\ 'aquamarine': '#7fffd4',
+			\ 'dark green': '#006400',
+			\ 'darkgreen': '#006400',
+			\ 'dark olive green': '#556b2f',
+			\ 'darkolivegreen': '#556b2f',
+			\ 'dark sea green': '#8fbc8f',
+			\ 'darkseagreen': '#8fbc8f',
+			\ 'sea green': '#2e8b57',
+			\ 'seagreen': '#2e8b57',
+			\ 'medium sea green': '#3cb371',
+			\ 'mediumseagreen': '#3cb371',
+			\ 'light sea green': '#20b2aa',
+			\ 'lightseagreen': '#20b2aa',
+			\ 'pale green': '#98fb98',
+			\ 'palegreen': '#98fb98',
+			\ 'spring green': '#00ff7f',
+			\ 'springgreen': '#00ff7f',
+			\ 'lawn green': '#7cfc00',
+			\ 'lawngreen': '#7cfc00',
+			\ 'green': '#00ff00',
+			\ 'lime': '#00ff00',
+			\ 'x11 green': '#00ff00',
+			\ 'x11green': '#00ff00',
+			\ 'web green': '#008000',
+			\ 'webgreen': '#008000',
+			\ 'chartreuse': '#7fff00',
+			\ 'medium spring green': '#00fa9a',
+			\ 'mediumspringgreen': '#00fa9a',
+			\ 'green yellow': '#adff2f',
+			\ 'greenyellow': '#adff2f',
+			\ 'lime green': '#32cd32',
+			\ 'limegreen': '#32cd32',
+			\ 'yellow green': '#9acd32',
+			\ 'yellowgreen': '#9acd32',
+			\ 'forest green': '#228b22',
+			\ 'forestgreen': '#228b22',
+			\ 'olive drab': '#6b8e23',
+			\ 'olivedrab': '#6b8e23',
+			\ 'dark khaki': '#bdb76b',
+			\ 'darkkhaki': '#bdb76b',
+			\ 'khaki': '#f0e68c',
+			\ 'pale goldenrod': '#eee8aa',
+			\ 'palegoldenrod': '#eee8aa',
+			\ 'light goldenrod yellow': '#fafad2',
+			\ 'lightgoldenrodyellow': '#fafad2',
+			\ 'light yellow': '#ffffe0',
+			\ 'lightyellow': '#ffffe0',
+			\ 'yellow': '#ffff00',
+			\ 'gold': '#ffd700',
+			\ 'light goldenrod': '#eedd82',
+			\ 'lightgoldenrod': '#eedd82',
+			\ 'goldenrod': '#daa520',
+			\ 'dark goldenrod': '#b8860b',
+			\ 'darkgoldenrod': '#b8860b',
+			\ 'rosy brown': '#bc8f8f',
+			\ 'rosybrown': '#bc8f8f',
+			\ 'indian red': '#cd5c5c',
+			\ 'indianred': '#cd5c5c',
+			\ 'saddle brown': '#8b4513',
+			\ 'saddlebrown': '#8b4513',
+			\ 'sienna': '#a0522d',
+			\ 'peru': '#cd853f',
+			\ 'burlywood': '#deb887',
+			\ 'beige': '#f5f5dc',
+			\ 'wheat': '#f5deb3',
+			\ 'sandy brown': '#f4a460',
+			\ 'sandybrown': '#f4a460',
+			\ 'tan': '#d2b48c',
+			\ 'chocolate': '#d2691e',
+			\ 'firebrick': '#b22222',
+			\ 'brown': '#a52a2a',
+			\ 'dark salmon': '#e9967a',
+			\ 'darksalmon': '#e9967a',
+			\ 'salmon': '#fa8072',
+			\ 'light salmon': '#ffa07a',
+			\ 'lightsalmon': '#ffa07a',
+			\ 'orange': '#ffa500',
+			\ 'dark orange': '#ff8c00',
+			\ 'darkorange': '#ff8c00',
+			\ 'coral': '#ff7f50',
+			\ 'light coral': '#f08080',
+			\ 'lightcoral': '#f08080',
+			\ 'tomato': '#ff6347',
+			\ 'orange red': '#ff4500',
+			\ 'orangered': '#ff4500',
+			\ 'red': '#ff0000',
+			\ 'hot pink': '#ff69b4',
+			\ 'hotpink': '#ff69b4',
+			\ 'deep pink': '#ff1493',
+			\ 'deeppink': '#ff1493',
+			\ 'pink': '#ffc0cb',
+			\ 'light pink': '#ffb6c1',
+			\ 'lightpink': '#ffb6c1',
+			\ 'pale violet red': '#db7093',
+			\ 'palevioletred': '#db7093',
+			\ 'maroon': '#b03060',
+			\ 'x11 maroon': '#b03060',
+			\ 'x11maroon': '#b03060',
+			\ 'web maroon': '#800000',
+			\ 'webmaroon': '#800000',
+			\ 'medium violet red': '#c71585',
+			\ 'mediumvioletred': '#c71585',
+			\ 'violet red': '#d02090',
+			\ 'violetred': '#d02090',
+			\ 'magenta': '#ff00ff',
+			\ 'fuchsia': '#ff00ff',
+			\ 'violet': '#ee82ee',
+			\ 'plum': '#dda0dd',
+			\ 'orchid': '#da70d6',
+			\ 'medium orchid': '#ba55d3',
+			\ 'mediumorchid': '#ba55d3',
+			\ 'dark orchid': '#9932cc',
+			\ 'darkorchid': '#9932cc',
+			\ 'dark violet': '#9400d3',
+			\ 'darkviolet': '#9400d3',
+			\ 'blue violet': '#8a2be2',
+			\ 'blueviolet': '#8a2be2',
+			\ 'purple': '#a020f0',
+			\ 'x11 purple': '#a020f0',
+			\ 'x11purple': '#a020f0',
+			\ 'web purple': '#800080',
+			\ 'webpurple': '#800080',
+			\ 'medium purple': '#9370db',
+			\ 'mediumpurple': '#9370db',
+			\ 'thistle': '#d8bfd8',
+			\ 'snow1': '#fffafa',
+			\ 'snow2': '#eee9e9',
+			\ 'snow3': '#cdc9c9',
+			\ 'snow4': '#8b8989',
+			\ 'seashell1': '#fff5ee',
+			\ 'seashell2': '#eee5de',
+			\ 'seashell3': '#cdc5bf',
+			\ 'seashell4': '#8b8682',
+			\ 'antiquewhite1': '#ffefdb',
+			\ 'antiquewhite2': '#eedfcc',
+			\ 'antiquewhite3': '#cdc0b0',
+			\ 'antiquewhite4': '#8b8378',
+			\ 'bisque1': '#ffe4c4',
+			\ 'bisque2': '#eed5b7',
+			\ 'bisque3': '#cdb79e',
+			\ 'bisque4': '#8b7d6b',
+			\ 'peachpuff1': '#ffdab9',
+			\ 'peachpuff2': '#eecbad',
+			\ 'peachpuff3': '#cdaf95',
+			\ 'peachpuff4': '#8b7765',
+			\ 'navajowhite1': '#ffdead',
+			\ 'navajowhite2': '#eecfa1',
+			\ 'navajowhite3': '#cdb38b',
+			\ 'navajowhite4': '#8b795e',
+			\ 'lemonchiffon1': '#fffacd',
+			\ 'lemonchiffon2': '#eee9bf',
+			\ 'lemonchiffon3': '#cdc9a5',
+			\ 'lemonchiffon4': '#8b8970',
+			\ 'cornsilk1': '#fff8dc',
+			\ 'cornsilk2': '#eee8cd',
+			\ 'cornsilk3': '#cdc8b1',
+			\ 'cornsilk4': '#8b8878',
+			\ 'ivory1': '#fffff0',
+			\ 'ivory2': '#eeeee0',
+			\ 'ivory3': '#cdcdc1',
+			\ 'ivory4': '#8b8b83',
+			\ 'honeydew1': '#f0fff0',
+			\ 'honeydew2': '#e0eee0',
+			\ 'honeydew3': '#c1cdc1',
+			\ 'honeydew4': '#838b83',
+			\ 'lavenderblush1': '#fff0f5',
+			\ 'lavenderblush2': '#eee0e5',
+			\ 'lavenderblush3': '#cdc1c5',
+			\ 'lavenderblush4': '#8b8386',
+			\ 'mistyrose1': '#ffe4e1',
+			\ 'mistyrose2': '#eed5d2',
+			\ 'mistyrose3': '#cdb7b5',
+			\ 'mistyrose4': '#8b7d7b',
+			\ 'azure1': '#f0ffff',
+			\ 'azure2': '#e0eeee',
+			\ 'azure3': '#c1cdcd',
+			\ 'azure4': '#838b8b',
+			\ 'slateblue1': '#836fff',
+			\ 'slateblue2': '#7a67ee',
+			\ 'slateblue3': '#6959cd',
+			\ 'slateblue4': '#473c8b',
+			\ 'royalblue1': '#4876ff',
+			\ 'royalblue2': '#436eee',
+			\ 'royalblue3': '#3a5fcd',
+			\ 'royalblue4': '#27408b',
+			\ 'blue1': '#0000ff',
+			\ 'blue2': '#0000ee',
+			\ 'blue3': '#0000cd',
+			\ 'blue4': '#00008b',
+			\ 'dodgerblue1': '#1e90ff',
+			\ 'dodgerblue2': '#1c86ee',
+			\ 'dodgerblue3': '#1874cd',
+			\ 'dodgerblue4': '#104e8b',
+			\ 'steelblue1': '#63b8ff',
+			\ 'steelblue2': '#5cacee',
+			\ 'steelblue3': '#4f94cd',
+			\ 'steelblue4': '#36648b',
+			\ 'deepskyblue1': '#00bfff',
+			\ 'deepskyblue2': '#00b2ee',
+			\ 'deepskyblue3': '#009acd',
+			\ 'deepskyblue4': '#00688b',
+			\ 'skyblue1': '#87ceff',
+			\ 'skyblue2': '#7ec0ee',
+			\ 'skyblue3': '#6ca6cd',
+			\ 'skyblue4': '#4a708b',
+			\ 'lightskyblue1': '#b0e2ff',
+			\ 'lightskyblue2': '#a4d3ee',
+			\ 'lightskyblue3': '#8db6cd',
+			\ 'lightskyblue4': '#607b8b',
+			\ 'slategray1': '#c6e2ff',
+			\ 'slategray2': '#b9d3ee',
+			\ 'slategray3': '#9fb6cd',
+			\ 'slategray4': '#6c7b8b',
+			\ 'lightsteelblue1': '#cae1ff',
+			\ 'lightsteelblue2': '#bcd2ee',
+			\ 'lightsteelblue3': '#a2b5cd',
+			\ 'lightsteelblue4': '#6e7b8b',
+			\ 'lightblue1': '#bfefff',
+			\ 'lightblue2': '#b2dfee',
+			\ 'lightblue3': '#9ac0cd',
+			\ 'lightblue4': '#68838b',
+			\ 'lightcyan1': '#e0ffff',
+			\ 'lightcyan2': '#d1eeee',
+			\ 'lightcyan3': '#b4cdcd',
+			\ 'lightcyan4': '#7a8b8b',
+			\ 'paleturquoise1': '#bbffff',
+			\ 'paleturquoise2': '#aeeeee',
+			\ 'paleturquoise3': '#96cdcd',
+			\ 'paleturquoise4': '#668b8b',
+			\ 'cadetblue1': '#98f5ff',
+			\ 'cadetblue2': '#8ee5ee',
+			\ 'cadetblue3': '#7ac5cd',
+			\ 'cadetblue4': '#53868b',
+			\ 'turquoise1': '#00f5ff',
+			\ 'turquoise2': '#00e5ee',
+			\ 'turquoise3': '#00c5cd',
+			\ 'turquoise4': '#00868b',
+			\ 'cyan1': '#00ffff',
+			\ 'cyan2': '#00eeee',
+			\ 'cyan3': '#00cdcd',
+			\ 'cyan4': '#008b8b',
+			\ 'darkslategray1': '#97ffff',
+			\ 'darkslategray2': '#8deeee',
+			\ 'darkslategray3': '#79cdcd',
+			\ 'darkslategray4': '#528b8b',
+			\ 'aquamarine1': '#7fffd4',
+			\ 'aquamarine2': '#76eec6',
+			\ 'aquamarine3': '#66cdaa',
+			\ 'aquamarine4': '#458b74',
+			\ 'darkseagreen1': '#c1ffc1',
+			\ 'darkseagreen2': '#b4eeb4',
+			\ 'darkseagreen3': '#9bcd9b',
+			\ 'darkseagreen4': '#698b69',
+			\ 'seagreen1': '#54ff9f',
+			\ 'seagreen2': '#4eee94',
+			\ 'seagreen3': '#43cd80',
+			\ 'seagreen4': '#2e8b57',
+			\ 'palegreen1': '#9aff9a',
+			\ 'palegreen2': '#90ee90',
+			\ 'palegreen3': '#7ccd7c',
+			\ 'palegreen4': '#548b54',
+			\ 'springgreen1': '#00ff7f',
+			\ 'springgreen2': '#00ee76',
+			\ 'springgreen3': '#00cd66',
+			\ 'springgreen4': '#008b45',
+			\ 'green1': '#00ff00',
+			\ 'green2': '#00ee00',
+			\ 'green3': '#00cd00',
+			\ 'green4': '#008b00',
+			\ 'chartreuse1': '#7fff00',
+			\ 'chartreuse2': '#76ee00',
+			\ 'chartreuse3': '#66cd00',
+			\ 'chartreuse4': '#458b00',
+			\ 'olivedrab1': '#c0ff3e',
+			\ 'olivedrab2': '#b3ee3a',
+			\ 'olivedrab3': '#9acd32',
+			\ 'olivedrab4': '#698b22',
+			\ 'darkolivegreen1': '#caff70',
+			\ 'darkolivegreen2': '#bcee68',
+			\ 'darkolivegreen3': '#a2cd5a',
+			\ 'darkolivegreen4': '#6e8b3d',
+			\ 'khaki1': '#fff68f',
+			\ 'khaki2': '#eee685',
+			\ 'khaki3': '#cdc673',
+			\ 'khaki4': '#8b864e',
+			\ 'lightgoldenrod1': '#ffec8b',
+			\ 'lightgoldenrod2': '#eedc82',
+			\ 'lightgoldenrod3': '#cdbe70',
+			\ 'lightgoldenrod4': '#8b814c',
+			\ 'lightyellow1': '#ffffe0',
+			\ 'lightyellow2': '#eeeed1',
+			\ 'lightyellow3': '#cdcdb4',
+			\ 'lightyellow4': '#8b8b7a',
+			\ 'yellow1': '#ffff00',
+			\ 'yellow2': '#eeee00',
+			\ 'yellow3': '#cdcd00',
+			\ 'yellow4': '#8b8b00',
+			\ 'gold1': '#ffd700',
+			\ 'gold2': '#eec900',
+			\ 'gold3': '#cdad00',
+			\ 'gold4': '#8b7500',
+			\ 'goldenrod1': '#ffc125',
+			\ 'goldenrod2': '#eeb422',
+			\ 'goldenrod3': '#cd9b1d',
+			\ 'goldenrod4': '#8b6914',
+			\ 'darkgoldenrod1': '#ffb90f',
+			\ 'darkgoldenrod2': '#eead0e',
+			\ 'darkgoldenrod3': '#cd950c',
+			\ 'darkgoldenrod4': '#8b6508',
+			\ 'rosybrown1': '#ffc1c1',
+			\ 'rosybrown2': '#eeb4b4',
+			\ 'rosybrown3': '#cd9b9b',
+			\ 'rosybrown4': '#8b6969',
+			\ 'indianred1': '#ff6a6a',
+			\ 'indianred2': '#ee6363',
+			\ 'indianred3': '#cd5555',
+			\ 'indianred4': '#8b3a3a',
+			\ 'sienna1': '#ff8247',
+			\ 'sienna2': '#ee7942',
+			\ 'sienna3': '#cd6839',
+			\ 'sienna4': '#8b4726',
+			\ 'burlywood1': '#ffd39b',
+			\ 'burlywood2': '#eec591',
+			\ 'burlywood3': '#cdaa7d',
+			\ 'burlywood4': '#8b7355',
+			\ 'wheat1': '#ffe7ba',
+			\ 'wheat2': '#eed8ae',
+			\ 'wheat3': '#cdba96',
+			\ 'wheat4': '#8b7e66',
+			\ 'tan1': '#ffa54f',
+			\ 'tan2': '#ee9a49',
+			\ 'tan3': '#cd853f',
+			\ 'tan4': '#8b5a2b',
+			\ 'chocolate1': '#ff7f24',
+			\ 'chocolate2': '#ee7621',
+			\ 'chocolate3': '#cd661d',
+			\ 'chocolate4': '#8b4513',
+			\ 'firebrick1': '#ff3030',
+			\ 'firebrick2': '#ee2c2c',
+			\ 'firebrick3': '#cd2626',
+			\ 'firebrick4': '#8b1a1a',
+			\ 'brown1': '#ff4040',
+			\ 'brown2': '#ee3b3b',
+			\ 'brown3': '#cd3333',
+			\ 'brown4': '#8b2323',
+			\ 'salmon1': '#ff8c69',
+			\ 'salmon2': '#ee8262',
+			\ 'salmon3': '#cd7054',
+			\ 'salmon4': '#8b4c39',
+			\ 'lightsalmon1': '#ffa07a',
+			\ 'lightsalmon2': '#ee9572',
+			\ 'lightsalmon3': '#cd8162',
+			\ 'lightsalmon4': '#8b5742',
+			\ 'orange1': '#ffa500',
+			\ 'orange2': '#ee9a00',
+			\ 'orange3': '#cd8500',
+			\ 'orange4': '#8b5a00',
+			\ 'darkorange1': '#ff7f00',
+			\ 'darkorange2': '#ee7600',
+			\ 'darkorange3': '#cd6600',
+			\ 'darkorange4': '#8b4500',
+			\ 'coral1': '#ff7256',
+			\ 'coral2': '#ee6a50',
+			\ 'coral3': '#cd5b45',
+			\ 'coral4': '#8b3e2f',
+			\ 'tomato1': '#ff6347',
+			\ 'tomato2': '#ee5c42',
+			\ 'tomato3': '#cd4f39',
+			\ 'tomato4': '#8b3626',
+			\ 'orangered1': '#ff4500',
+			\ 'orangered2': '#ee4000',
+			\ 'orangered3': '#cd3700',
+			\ 'orangered4': '#8b2500',
+			\ 'red1': '#ff0000',
+			\ 'red2': '#ee0000',
+			\ 'red3': '#cd0000',
+			\ 'red4': '#8b0000',
+			\ 'deeppink1': '#ff1493',
+			\ 'deeppink2': '#ee1289',
+			\ 'deeppink3': '#cd1076',
+			\ 'deeppink4': '#8b0a50',
+			\ 'hotpink1': '#ff6eb4',
+			\ 'hotpink2': '#ee6aa7',
+			\ 'hotpink3': '#cd6090',
+			\ 'hotpink4': '#8b3a62',
+			\ 'pink1': '#ffb5c5',
+			\ 'pink2': '#eea9b8',
+			\ 'pink3': '#cd919e',
+			\ 'pink4': '#8b636c',
+			\ 'lightpink1': '#ffaeb9',
+			\ 'lightpink2': '#eea2ad',
+			\ 'lightpink3': '#cd8c95',
+			\ 'lightpink4': '#8b5f65',
+			\ 'palevioletred1': '#ff82ab',
+			\ 'palevioletred2': '#ee799f',
+			\ 'palevioletred3': '#cd6889',
+			\ 'palevioletred4': '#8b475d',
+			\ 'maroon1': '#ff34b3',
+			\ 'maroon2': '#ee30a7',
+			\ 'maroon3': '#cd2990',
+			\ 'maroon4': '#8b1c62',
+			\ 'violetred1': '#ff3e96',
+			\ 'violetred2': '#ee3a8c',
+			\ 'violetred3': '#cd3278',
+			\ 'violetred4': '#8b2252',
+			\ 'magenta1': '#ff00ff',
+			\ 'magenta2': '#ee00ee',
+			\ 'magenta3': '#cd00cd',
+			\ 'magenta4': '#8b008b',
+			\ 'orchid1': '#ff83fa',
+			\ 'orchid2': '#ee7ae9',
+			\ 'orchid3': '#cd69c9',
+			\ 'orchid4': '#8b4789',
+			\ 'plum1': '#ffbbff',
+			\ 'plum2': '#eeaeee',
+			\ 'plum3': '#cd96cd',
+			\ 'plum4': '#8b668b',
+			\ 'mediumorchid1': '#e066ff',
+			\ 'mediumorchid2': '#d15fee',
+			\ 'mediumorchid3': '#b452cd',
+			\ 'mediumorchid4': '#7a378b',
+			\ 'darkorchid1': '#bf3eff',
+			\ 'darkorchid2': '#b23aee',
+			\ 'darkorchid3': '#9a32cd',
+			\ 'darkorchid4': '#68228b',
+			\ 'purple1': '#9b30ff',
+			\ 'purple2': '#912cee',
+			\ 'purple3': '#7d26cd',
+			\ 'purple4': '#551a8b',
+			\ 'mediumpurple1': '#ab82ff',
+			\ 'mediumpurple2': '#9f79ee',
+			\ 'mediumpurple3': '#8968cd',
+			\ 'mediumpurple4': '#5d478b',
+			\ 'thistle1': '#ffe1ff',
+			\ 'thistle2': '#eed2ee',
+			\ 'thistle3': '#cdb5cd',
+			\ 'thistle4': '#8b7b8b',
+			\ 'gray0': '#000000',
+			\ 'grey0': '#000000',
+			\ 'gray1': '#030303',
+			\ 'grey1': '#030303',
+			\ 'gray2': '#050505',
+			\ 'grey2': '#050505',
+			\ 'gray3': '#080808',
+			\ 'grey3': '#080808',
+			\ 'gray4': '#0a0a0a',
+			\ 'grey4': '#0a0a0a',
+			\ 'gray5': '#0d0d0d',
+			\ 'grey5': '#0d0d0d',
+			\ 'gray6': '#0f0f0f',
+			\ 'grey6': '#0f0f0f',
+			\ 'gray7': '#121212',
+			\ 'grey7': '#121212',
+			\ 'gray8': '#141414',
+			\ 'grey8': '#141414',
+			\ 'gray9': '#171717',
+			\ 'grey9': '#171717',
+			\ 'gray10': '#1a1a1a',
+			\ 'grey10': '#1a1a1a',
+			\ 'gray11': '#1c1c1c',
+			\ 'grey11': '#1c1c1c',
+			\ 'gray12': '#1f1f1f',
+			\ 'grey12': '#1f1f1f',
+			\ 'gray13': '#212121',
+			\ 'grey13': '#212121',
+			\ 'gray14': '#242424',
+			\ 'grey14': '#242424',
+			\ 'gray15': '#262626',
+			\ 'grey15': '#262626',
+			\ 'gray16': '#292929',
+			\ 'grey16': '#292929',
+			\ 'gray17': '#2b2b2b',
+			\ 'grey17': '#2b2b2b',
+			\ 'gray18': '#2e2e2e',
+			\ 'grey18': '#2e2e2e',
+			\ 'gray19': '#303030',
+			\ 'grey19': '#303030',
+			\ 'gray20': '#333333',
+			\ 'grey20': '#333333',
+			\ 'gray21': '#363636',
+			\ 'grey21': '#363636',
+			\ 'gray22': '#383838',
+			\ 'grey22': '#383838',
+			\ 'gray23': '#3b3b3b',
+			\ 'grey23': '#3b3b3b',
+			\ 'gray24': '#3d3d3d',
+			\ 'grey24': '#3d3d3d',
+			\ 'gray25': '#404040',
+			\ 'grey25': '#404040',
+			\ 'gray26': '#424242',
+			\ 'grey26': '#424242',
+			\ 'gray27': '#454545',
+			\ 'grey27': '#454545',
+			\ 'gray28': '#474747',
+			\ 'grey28': '#474747',
+			\ 'gray29': '#4a4a4a',
+			\ 'grey29': '#4a4a4a',
+			\ 'gray30': '#4d4d4d',
+			\ 'grey30': '#4d4d4d',
+			\ 'gray31': '#4f4f4f',
+			\ 'grey31': '#4f4f4f',
+			\ 'gray32': '#525252',
+			\ 'grey32': '#525252',
+			\ 'gray33': '#545454',
+			\ 'grey33': '#545454',
+			\ 'gray34': '#575757',
+			\ 'grey34': '#575757',
+			\ 'gray35': '#595959',
+			\ 'grey35': '#595959',
+			\ 'gray36': '#5c5c5c',
+			\ 'grey36': '#5c5c5c',
+			\ 'gray37': '#5e5e5e',
+			\ 'grey37': '#5e5e5e',
+			\ 'gray38': '#616161',
+			\ 'grey38': '#616161',
+			\ 'gray39': '#636363',
+			\ 'grey39': '#636363',
+			\ 'gray40': '#666666',
+			\ 'grey40': '#666666',
+			\ 'gray41': '#696969',
+			\ 'grey41': '#696969',
+			\ 'gray42': '#6b6b6b',
+			\ 'grey42': '#6b6b6b',
+			\ 'gray43': '#6e6e6e',
+			\ 'grey43': '#6e6e6e',
+			\ 'gray44': '#707070',
+			\ 'grey44': '#707070',
+			\ 'gray45': '#737373',
+			\ 'grey45': '#737373',
+			\ 'gray46': '#757575',
+			\ 'grey46': '#757575',
+			\ 'gray47': '#787878',
+			\ 'grey47': '#787878',
+			\ 'gray48': '#7a7a7a',
+			\ 'grey48': '#7a7a7a',
+			\ 'gray49': '#7d7d7d',
+			\ 'grey49': '#7d7d7d',
+			\ 'gray50': '#7f7f7f',
+			\ 'grey50': '#7f7f7f',
+			\ 'gray51': '#828282',
+			\ 'grey51': '#828282',
+			\ 'gray52': '#858585',
+			\ 'grey52': '#858585',
+			\ 'gray53': '#878787',
+			\ 'grey53': '#878787',
+			\ 'gray54': '#8a8a8a',
+			\ 'grey54': '#8a8a8a',
+			\ 'gray55': '#8c8c8c',
+			\ 'grey55': '#8c8c8c',
+			\ 'gray56': '#8f8f8f',
+			\ 'grey56': '#8f8f8f',
+			\ 'gray57': '#919191',
+			\ 'grey57': '#919191',
+			\ 'gray58': '#949494',
+			\ 'grey58': '#949494',
+			\ 'gray59': '#969696',
+			\ 'grey59': '#969696',
+			\ 'gray60': '#999999',
+			\ 'grey60': '#999999',
+			\ 'gray61': '#9c9c9c',
+			\ 'grey61': '#9c9c9c',
+			\ 'gray62': '#9e9e9e',
+			\ 'grey62': '#9e9e9e',
+			\ 'gray63': '#a1a1a1',
+			\ 'grey63': '#a1a1a1',
+			\ 'gray64': '#a3a3a3',
+			\ 'grey64': '#a3a3a3',
+			\ 'gray65': '#a6a6a6',
+			\ 'grey65': '#a6a6a6',
+			\ 'gray66': '#a8a8a8',
+			\ 'grey66': '#a8a8a8',
+			\ 'gray67': '#ababab',
+			\ 'grey67': '#ababab',
+			\ 'gray68': '#adadad',
+			\ 'grey68': '#adadad',
+			\ 'gray69': '#b0b0b0',
+			\ 'grey69': '#b0b0b0',
+			\ 'gray70': '#b3b3b3',
+			\ 'grey70': '#b3b3b3',
+			\ 'gray71': '#b5b5b5',
+			\ 'grey71': '#b5b5b5',
+			\ 'gray72': '#b8b8b8',
+			\ 'grey72': '#b8b8b8',
+			\ 'gray73': '#bababa',
+			\ 'grey73': '#bababa',
+			\ 'gray74': '#bdbdbd',
+			\ 'grey74': '#bdbdbd',
+			\ 'gray75': '#bfbfbf',
+			\ 'grey75': '#bfbfbf',
+			\ 'gray76': '#c2c2c2',
+			\ 'grey76': '#c2c2c2',
+			\ 'gray77': '#c4c4c4',
+			\ 'grey77': '#c4c4c4',
+			\ 'gray78': '#c7c7c7',
+			\ 'grey78': '#c7c7c7',
+			\ 'gray79': '#c9c9c9',
+			\ 'grey79': '#c9c9c9',
+			\ 'gray80': '#cccccc',
+			\ 'grey80': '#cccccc',
+			\ 'gray81': '#cfcfcf',
+			\ 'grey81': '#cfcfcf',
+			\ 'gray82': '#d1d1d1',
+			\ 'grey82': '#d1d1d1',
+			\ 'gray83': '#d4d4d4',
+			\ 'grey83': '#d4d4d4',
+			\ 'gray84': '#d6d6d6',
+			\ 'grey84': '#d6d6d6',
+			\ 'gray85': '#d9d9d9',
+			\ 'grey85': '#d9d9d9',
+			\ 'gray86': '#dbdbdb',
+			\ 'grey86': '#dbdbdb',
+			\ 'gray87': '#dedede',
+			\ 'grey87': '#dedede',
+			\ 'gray88': '#e0e0e0',
+			\ 'grey88': '#e0e0e0',
+			\ 'gray89': '#e3e3e3',
+			\ 'grey89': '#e3e3e3',
+			\ 'gray90': '#e5e5e5',
+			\ 'grey90': '#e5e5e5',
+			\ 'gray91': '#e8e8e8',
+			\ 'grey91': '#e8e8e8',
+			\ 'gray92': '#ebebeb',
+			\ 'grey92': '#ebebeb',
+			\ 'gray93': '#ededed',
+			\ 'grey93': '#ededed',
+			\ 'gray94': '#f0f0f0',
+			\ 'grey94': '#f0f0f0',
+			\ 'gray95': '#f2f2f2',
+			\ 'grey95': '#f2f2f2',
+			\ 'gray96': '#f5f5f5',
+			\ 'grey96': '#f5f5f5',
+			\ 'gray97': '#f7f7f7',
+			\ 'grey97': '#f7f7f7',
+			\ 'gray98': '#fafafa',
+			\ 'grey98': '#fafafa',
+			\ 'gray99': '#fcfcfc',
+			\ 'grey99': '#fcfcfc',
+			\ 'gray100': '#ffffff',
+			\ 'grey100': '#ffffff',
+			\ 'dark grey': '#a9a9a9',
+			\ 'darkgrey': '#a9a9a9',
+			\ 'dark gray': '#a9a9a9',
+			\ 'darkgray': '#a9a9a9',
+			\ 'dark blue': '#00008b',
+			\ 'darkblue': '#00008b',
+			\ 'dark cyan': '#008b8b',
+			\ 'darkcyan': '#008b8b',
+			\ 'dark magenta': '#8b008b',
+			\ 'darkmagenta': '#8b008b',
+			\ 'dark red': '#8b0000',
+			\ 'darkred': '#8b0000',
+			\ 'light green': '#90ee90',
+			\ 'lightgreen': '#90ee90',
+			\ 'crimson': '#dc143c',
+			\ 'indigo': '#4b0082',
+			\ 'olive': '#808000',
+			\ 'rebecca purple': '#663399',
+			\ 'rebeccapurple': '#663399',
+			\ 'silver': '#c0c0c0',
+			\ 'teal': '#008080'
+			\ }, 'keep')
+
+let &cpo= s:keepcpo
+unlet s:keepcpo
+
+"vim: sw=4

runtime/colors/tools/check_colors.vim

@@ -226,7 +226,13 @@ fu! Result(err)
   endif
 endfu
 
-call Test_check_colors()
-
-let &cpo = s:save_cpo
-unlet s:save_cpo
+try
+  call Test_check_colors()
+catch
+  echohl ErrorMsg
+  echomsg v:exception
+  echohl NONE
+finally
+  let &cpo = s:save_cpo
+  unlet s:save_cpo
+endtry

runtime/defaults.vim

@@ -1,7 +1,7 @@
 " The default vimrc file.
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last change:	2020 Sep 30
+" Last change:	2021 Nov 17
 "
 " This is loaded if no vimrc file was found.
 " Except when Vim is run with "-u NONE" or "-C".
@@ -96,7 +96,7 @@ if 1
   filetype plugin indent on
 
   " Put these in an autocmd group, so that you can revert them with:
-  " ":augroup vimStartup | au! | augroup END"
+  " ":augroup vimStartup | exe 'au!' | augroup END"
   augroup vimStartup
     au!
 
@@ -111,6 +111,18 @@ if 1
 
   augroup END
 
+  " Quite a few people accidentally type "q:" instead of ":q" and get confused
+  " by the command line window.  Give a hint about how to get out.
+  " If you don't like this you can put this in your vimrc:
+  " ":augroup vimHints | exe 'au!' | augroup END"
+  augroup vimHints
+    au!
+    autocmd CmdwinEnter *
+	  \ echohl Todo | 
+	  \ echo 'You discovered the command-line window! You can close it with ":q".' |
+	  \ echohl None
+  augroup END
+
 endif
 
 " Switch syntax highlighting on when the terminal has colors or when using the

runtime/doc/autocmd.txt

@@ -1,4 +1,4 @@
-*autocmd.txt*   For Vim version 8.2.  Last change: 2021 Aug 01
+*autocmd.txt*   For Vim version 8.2.  Last change: 2021 Nov 20
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -83,7 +83,7 @@ triggered.
 		}
 
 Note: The ":autocmd" command can only be followed by another command when the
-'|' appears before {cmd}.  This works: >
+'|' appears where the pattern is expected.  This works: >
 	:augroup mine | au! BufRead | augroup END
 But this sees "augroup" as part of the defined command: >
 	:augroup mine | au! BufRead * | augroup END
@@ -348,6 +348,7 @@ Name			triggered by ~
 
 |WinNew|		after creating a new window
 |TabNew|		after creating a new tab page
+|WinClosed|		after closing a window
 |TabClosed|		after closing a tab page
 |WinEnter|		after entering another window
 |WinLeave|		before leaving a window
@@ -708,7 +709,7 @@ EncodingChanged			Fires off after the 'encoding' option has been
 							*FileAppendCmd*
 FileAppendCmd			Before appending to a file.  Should do the
 				appending to the file.  Use the '[ and ']
-				marks for the range of lines.|Cmd-event|
+				marks for the range of lines. |Cmd-event|
 							*FileAppendPost*
 FileAppendPost			After appending to a file.
 							*FileAppendPre*
@@ -836,7 +837,7 @@ FilterReadPre			Before reading a file from a filter command.
 							*FilterWritePost*
 FilterWritePost			After writing a file for a filter command or
 				making a diff with an external diff (see
-				DiffUpdated for internal diff).
+				|DiffUpdated| for internal diff).
 				Vim checks the pattern against the name of
 				the current buffer as with FilterWritePre.
 				Not triggered when 'shelltemp' is off.
@@ -930,18 +931,23 @@ MenuPopup			Just before showing the popup menu (under the
 							*ModeChanged*
 ModeChanged			After changing the mode. The pattern is
 				matched against `'old_mode:new_mode'`, for
-				example match against `i:*` to simulate
-				|InsertLeave|.
+				example match against `*:c*` to simulate
+				|CmdlineEnter|.
 				The following values of |v:event| are set:
 				   old_mode	The mode before it changed.
 				   new_mode	The new mode as also returned
-						by |mode()|.
+						by |mode()| called with a
+						non-zero argument.
 				When ModeChanged is triggered, old_mode will
 				have the value of new_mode when the event was
 				last triggered.
+				This will be triggered on every minor mode
+				change.
 				Usage example to use relative line numbers
-				when entering visual mode: >
-	:autocmd ModeChanged *:v set relativenumber
+				when entering Visual mode: >
+	:au ModeChanged [vV\x16]*:* let &l:rnu = mode() =~# '^[vV\x16]'
+	:au ModeChanged *:[vV\x16]* let &l:rnu = mode() =~# '^[vV\x16]'
+	:au WinEnter,WinLeave * let &l:rnu = mode() =~# '^[vV\x16]'
 <							*OptionSet*
 OptionSet			After setting an option.  The pattern is
 				matched against the long option name.
@@ -1195,9 +1201,9 @@ TextYankPost			After text has been yanked or deleted in the
 						register, as a list of lines,
 						like with: >
 						getreg(r, 1, 1)
-<				   regname	Name of the |register| or
-						empty string for the unnamed
-						register.
+<				   regname	Name of the register or empty
+						string for the unnamed
+						register, see |registers|.
 				   regtype	Type of the register, see
 						|getregtype()|.
 				   visual	True if the operation is
@@ -1275,6 +1281,12 @@ VimResume			When the Vim instance is resumed after being
 VimSuspend			When the Vim instance is suspended.  Only when
 				CTRL-Z was typed inside Vim, not when the
 				SIGSTOP or SIGTSTP signal was sent to Vim.
+							*WinClosed*
+WinClosed			After closing a window.  The pattern is
+				matched against the |window-ID|.  Both
+				<amatch> and <afile> are set to the
+				|window-ID|.  Non-recursive (event cannot
+				trigger itself).
 							*WinEnter*
 WinEnter			After entering another window.  Not done for
 				the first window, when Vim has just started.
@@ -1502,6 +1514,13 @@ Example: >
 This prevents having the autocommands defined twice (e.g., after sourcing the
 .vimrc file again).
 
+						*FileExplorer*
+There is one group that is recognized by Vim: FileExplorer.  If this group
+exists Vim assumes that editing a directory is possible and will trigger a
+plugin that lists the files in that directory.  This is used by the |netrw|
+plugin.  This allows you to do: >
+	browse edit
+
 ==============================================================================
 9. Executing autocommands				*autocmd-execute*
 

runtime/doc/change.txt

@@ -1184,9 +1184,6 @@ a register, a paste on a visual selected area will paste that single line on
 each of the selected lines (thus replacing the blockwise selected region by a
 block of the pasted line).
 
-Use |zP|/|zp| to paste a blockwise yanked register without appending trailing
-spaces.
-
 							*blockwise-register*
 If you use a blockwise Visual mode command to get the text into the register,
 the block of text will be inserted before ("P") or after ("p") the cursor
@@ -1197,6 +1194,9 @@ this happen.  However, if the width of the block is not a multiple of a <Tab>
 width and the text after the inserted block contains <Tab>s, that text may be
 misaligned.
 
+Use |zP|/|zp| to paste a blockwise yanked register without appending trailing
+spaces.
+
 Note that after a characterwise yank command, Vim leaves the cursor on the
 first yanked character that is closest to the start of the buffer.  This means
 that "yl" doesn't move the cursor, but "yh" moves the cursor one character

runtime/doc/channel.txt

@@ -1,4 +1,4 @@
-*channel.txt*      For Vim version 8.2.  Last change: 2020 Oct 17
+*channel.txt*      For Vim version 8.2.  Last change: 2021 Nov 28
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -101,7 +101,7 @@ Instead of giving a callback with every send call, it can also be specified
 when opening the channel: >
 	call ch_close(channel)
 	let channel = ch_open('localhost:8765', {'callback': "MyHandler"})
-	call ch_sendexpr(channel, 'hello!')
+	call ch_sendexpr(channel, 'hello channel!')
 
 When trying out channels it's useful to see what is going on.  You can tell
 Vim to write lines in log file: >
@@ -132,8 +132,9 @@ When using an IPv6 address, enclose it within square brackets.  E.g.,
 	"raw"  - Use raw messages
 						*channel-callback* *E921*
 "callback"	A function that is called when a message is received that is
-		not handled otherwise.  It gets two arguments: the channel
-		and the received message. Example: >
+		not handled otherwise (e.g. a JSON message with ID zero).  It
+		gets two arguments: the channel and the received message.
+		Example: >
 	func Handle(channel, msg)
 	  echo 'Received: ' . a:msg
 	endfunc

runtime/doc/cmdline.txt

@@ -1,4 +1,4 @@
-*cmdline.txt*   For Vim version 8.2.  Last change: 2021 Aug 06
+*cmdline.txt*   For Vim version 8.2.  Last change: 2021 Dec 04
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -803,7 +803,7 @@ three lines: >
 		3:d<CR>		is translated into: .,.+2d<CR>
 <
 
-Visual Mode and Range					
+Visual Mode and Range
 							*v_:*
 {Visual}:	Starts a command-line with the Visual selected lines as a
 		range.  The code `:'<,'>` is used for this range, which makes
@@ -919,15 +919,19 @@ Note: these are typed literally, they are not special keys!
 							*:<amatch>* *<amatch>*
 	<amatch>   When executing autocommands, is replaced with the match for
 		   which this autocommand was executed.  *E497*
-		   It differs from <afile> only when the file name isn't used
-		   to match with (for FileType, Syntax and SpellFileMissing
+		   It differs from <afile> when the file name isn't used to
+		   match with (for FileType, Syntax and SpellFileMissing
 		   events).
+		   When the match is with a file name, it is expanded to the
+		   full path.
 							*:<sfile>* *<sfile>*
 	<sfile>    When executing a ":source" command, is replaced with the
 		   file name of the sourced file.  *E498*
-		   When executing a function, is replaced with the call stack,
-		   as with <stack> (this is for backwards compatibility, using
-		   <stack> is preferred).
+		   When executing a legacy function, is replaced with the call
+		   stack, as with <stack> (this is for backwards
+		   compatibility, using <stack> is preferred).
+		   In Vim9 script using <sfile> in a function gives error
+		   *E1245* .
 		   Note that filename-modifiers are useless when <sfile> is
 		   not used inside a script.
 							*:<stack>* *<stack>*

runtime/doc/digraph.txt

@@ -351,8 +351,8 @@ $	DO	0x24	 36	DOLLAR SIGN
 þ	th	0xfe	254	LATIN SMALL LETTER THORN (Icelandic)
 ÿ	y:	0xff	255	LATIN SMALL LETTER Y WITH DIAERESIS
 
-If your Vim is compiled with |multibyte| support and you are using a multibyte
-'encoding', Vim provides this enhanced set of additional digraphs:
+If you are using a |multibyte| 'encoding', Vim provides this enhanced set of
+additional digraphs:
 
 							*digraph-table-mbyte*
 char  digraph	hex	dec	official name ~

runtime/doc/editing.txt

@@ -1,4 +1,4 @@
-*editing.txt*   For Vim version 8.2.  Last change: 2021 Jul 25
+*editing.txt*   For Vim version 8.2.  Last change: 2021 Dec 11
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1225,7 +1225,9 @@ If you want to always use ":confirm", set the 'confirm' option.
 			|:diffsplit|, |:diffpatch|, |:open|, |:pedit|,
 			|:redir|, |:source|, |:update|, |:visual|, |:vsplit|,
 			and |:qall| if 'confirm' is set.
-			{only in Win32, Athena, Motif, GTK and Mac GUI}
+			{only in Win32, Athena, Motif, GTK and Mac GUI, in
+			console `browse edit` works if the FileExplorer
+			autocommand group exists}
 			When ":browse" is not possible you get an error
 			message.  If the |+browse| feature is missing or the
 			{command} doesn't support browsing, the {command} is
@@ -1296,11 +1298,12 @@ Changing directory fails when the current buffer is modified, the '.' flag is
 present in 'cpoptions' and "!" is not used in the command.
 
 							*:cd* *E747* *E472*
-:cd[!]			On non-Unix systems: Print the current directory
-			name.  On Unix systems: Change the current directory
-			to the home directory.  Use |:pwd| to print the
-			current directory on all systems.
-			On Unix systems: clear any window-local directory.
+:cd[!]			On non-Unix systems when 'cdhome' is off: Print the
+			current directory name.
+			Otherwise: Change the current directory to the home
+			directory.  Clear any window-local directory.
+			Use |:pwd| to print the current directory on all
+			systems.
 
 :cd[!] {path}		Change the current directory to {path}.
 			If {path} is relative, it is searched for in the
@@ -1327,26 +1330,26 @@ present in 'cpoptions' and "!" is not used in the command.
 			other tabs and for windows in the current tab that
 			have their own window-local directory.
 
-							*:tch* *:tchdir*
-:tch[dir][!]		Same as |:tcd|.
-
 							*:tcd-*
 :tc[d][!] -		Change to the previous current directory, before the
 			last ":tcd {path}" command.
 
+							*:tch* *:tchdir*
+:tch[dir][!]		Same as |:tcd|.
+
 							*:lc* *:lcd*
 :lc[d][!] {path}	Like |:cd|, but only set the current directory when
 			the cursor is in the current window.  The current
 			directory for other windows is not changed, switching
 			to another window will stop using {path}.
 
-							*:lch* *:lchdir*
-:lch[dir][!]		Same as |:lcd|.
-
 							*:lcd-*
 :lcd[!] -		Change to the previous current directory, before the
 			last ":lcd {path}" command.
 
+							*:lch* *:lchdir*
+:lch[dir][!]		Same as |:lcd|.
+
 							*:pw* *:pwd* *E187*
 :pw[d]			Print the current directory name.
 			Also see |getcwd()|.
@@ -1373,14 +1376,14 @@ change anything for the current directory.
 When a |:lcd| command has been used for a window, the specified directory
 becomes the current directory for that window.  Windows where the |:lcd|
 command has not been used stick to the global or tab-local current directory.
-When jumping to another window the current directory will become the last
+When jumping to another window the current directory is changed to the last
 specified local current directory.  If none was specified, the global or
 tab-local current directory is used.
 
 When a |:tcd| command has been used for a tab page, the specified directory
 becomes the current directory for the current tab page and the current window.
 The current directory of other tab pages is not affected.  When jumping to
-another tab page, the current directory will become the last specified local
+another tab page, the current directory is changed to the last specified local
 directory for that tab page. If the current tab has no local current directory
 the global current directory is used.
 
@@ -1674,6 +1677,11 @@ It is also possible that you modified the file yourself, from another edit
 session or with another command (e.g., a filter command).  Then you will know
 which version of the file you want to keep.
 
+The accuracy of the time check depends on the filesystem.  On Unix it is
+usually sub-second.  With old file sytems and on MS-Windows it is normally one
+second.  Use has('nanotime') check if sub-second time stamp checks are
+available.
+
 There is one situation where you get the message while there is nothing wrong:
 On a Win32 system on the day daylight saving time starts.  There is something
 in the Win32 libraries that confuses Vim about the hour time difference.  The

runtime/doc/eval.txt

@@ -1,4 +1,4 @@
-*eval.txt*	For Vim version 8.2.  Last change: 2021 Sep 19
+*eval.txt*	For Vim version 8.2.  Last change: 2021 Dec 24
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -1417,7 +1417,7 @@ A string constant accepts these special characters:
 \U....	same as \u but allows up to 8 hex numbers.
 \b	backspace <BS>
 \e	escape <Esc>
-\f	formfeed <FF>
+\f	formfeed 0x0C
 \n	newline <NL>
 \r	return <CR>
 \t	tab <Tab>
@@ -1426,7 +1426,7 @@ A string constant accepts these special characters:
 \<xxx>	Special key named "xxx".  e.g. "\<C-W>" for CTRL-W.  This is for use
 	in mappings, the 0x80 byte is escaped.
 	To use the double quote character it must be escaped: "<M-\">".
-	Don't use <Char-xxxx> to get a utf-8 character, use \uxxxx as
+	Don't use <Char-xxxx> to get a UTF-8 character, use \uxxxx as
 	mentioned above.
 \<*xxx>	Like \<xxx> but prepends a modifier instead of including it in the
 	character.  E.g. "\<C-w>" is one character 0x17 while "\<*C-w>" is four
@@ -1840,6 +1840,43 @@ v:collate	The current locale setting for collation order of the runtime
 		command.
 		See |multi-lang|.
 
+                                                                *v:colornames*
+v:colornames    A dictionary that maps color names to hex color strings. These
+		color names can be used with the |highlight-guifg|,
+		|highlight-guibg|, and |highlight-guisp| parameters. Updating
+		an entry in v:colornames has no immediate effect on the syntax
+		highlighting. The highlight commands (probably in a
+		colorscheme script) need to be re-evaluated in order to use
+		the updated color values. For example: >
+
+		    :let v:colornames['fuscia'] = '#cf3ab4'
+		    :let v:colornames['mauve'] = '#915f6d'
+		    :highlight Normal guifg=fuscia guibg=mauve
+<
+		This cannot be used to override the |cterm-colors| but it can
+		be used to override other colors. For example, the X11 colors
+		defined in the `colors/lists/default.vim` (previously defined
+		in |rgb.txt|). When defining new color names in a plugin, the
+		recommended practice is to set a color entry only when it does
+		not already exist. For example: >
+
+		    :call extend(v:colornames, {
+			\ 'fuscia': '#cf3ab4',
+			\ 'mauve': '#915f6d,
+			\ }, 'keep')
+<
+		Using |extend()| with the 'keep' option updates each color only
+		if it did not exist in |v:colornames|. Doing so allows the
+		user to choose the precise color value for a common name
+		by setting it in their |.vimrc|.
+
+		It is possible to remove entries from this dictionary but
+		doing so is NOT recommended, because it is disruptive to
+		other scripts. It is also unlikely to achieve the desired
+		result because the |:colorscheme| and |:highlight| commands will
+		both automatically load all `colors/lists/default.vim` color
+		scripts.
+
 				*v:completed_item* *completed_item-variable*
 v:completed_item
 		|Dictionary| containing the |complete-items| for the most
@@ -2253,6 +2290,21 @@ v:shell_error	Result of the last shell command.  When non-zero, the last
 <		"shell_error" also works, for backwards compatibility, unless
 		|scriptversion| is 3 or higher.
 
+					*v:sizeofint* *sizeofint-variable*
+v:sizeofint	Number of bytes in an int.  Depends on how Vim was compiled.
+		This is only useful for deciding whether a test will give the
+		expected result.
+
+					*v:sizeoflong* *sizeoflong-variable*
+v:sizeoflong	Number of bytes in a long.  Depends on how Vim was compiled.
+		This is only useful for deciding whether a test will give the
+		expected result.
+
+				*v:sizeofpointer* *sizeofpointer-variable*
+v:sizeofpointer	Number of bytes in a pointer.  Depends on how Vim was compiled.
+		This is only useful for deciding whether a test will give the
+		expected result.
+
 					*v:statusmsg* *statusmsg-variable*
 v:statusmsg	Last given status message.  It's allowed to set this variable.
 
@@ -2315,7 +2367,9 @@ v:termresponse	The escape sequence returned by the terminal for the |t_RV|
 		The response from a new xterm is: "<Esc>[> Pp ; Pv ; Pc c".  Pp
 		is the terminal type: 0 for vt100 and 1 for vt220.  Pv is the
 		patch level (since this was introduced in patch 95, it's
-		always 95 or bigger).  Pc is always zero.
+		always 95 or higher).  Pc is always zero.
+		If Pv is 141 or higher then Vim will try to request terminal
+		codes.  This only works with xterm |xterm-codes|.
 		{only when compiled with |+termresponse| feature}
 
 						*v:termblinkresp*
@@ -2516,7 +2570,7 @@ ch_setoptions({handle}, {options})
 ch_status({handle} [, {options}])
 				String	status of channel {handle}
 changenr()			Number	current change number
-char2nr({expr} [, {utf8}])	Number	ASCII/UTF8 value of first char in {expr}
+char2nr({expr} [, {utf8}])	Number	ASCII/UTF-8 value of first char in {expr}
 charclass({string})		Number	character class of {string}
 charcol({expr})			Number	column number of cursor or mark
 charidx({string}, {idx} [, {countcc}])
@@ -2549,7 +2603,7 @@ deletebufline({buf}, {first} [, {last}])
 did_filetype()			Number	|TRUE| if FileType autocmd event used
 diff_filler({lnum})		Number	diff filler lines about {lnum}
 diff_hlID({lnum}, {col})	Number	diff highlighting at {lnum}/{col}
-digraph_get({chars})		String	get the digraph of {chars}
+digraph_get({chars})		String	get the |digraph| of {chars}
 digraph_getlist([{listall}])	List	get all |digraph|s
 digraph_set({chars}, {digraph})	Boolean	register |digraph|
 digraph_setlist({digraphlist})	Boolean	register multiple |digraph|s
@@ -2576,7 +2630,8 @@ extendnew({expr1}, {expr2} [, {expr3}])
 feedkeys({string} [, {mode}])	Number	add key sequence to typeahead buffer
 filereadable({file})		Number	|TRUE| if {file} is a readable file
 filewritable({file})		Number	|TRUE| if {file} is a writable file
-filter({expr1}, {expr2})	List/Dict  remove items from {expr1} where
+filter({expr1}, {expr2})	List/Dict/Blob/String
+					remove items from {expr1} where
 					{expr2} is 0
 finddir({name} [, {path} [, {count}]])
 				String	find directory {name} in {path}
@@ -2681,6 +2736,8 @@ histget({history} [, {index}])	String	get the item {index} from a history
 histnr({history})		Number	highest index of a history
 hlID({name})			Number	syntax ID of highlight group {name}
 hlexists({name})		Number	|TRUE| if highlight group {name} exists
+hlget([{name} [, {resolve}]])	List	get highlight group attributes
+hlset({list})			Number	set highlight group attributes
 hostname()			String	name of the machine Vim is running on
 iconv({expr}, {from}, {to})	String	convert encoding of {expr}
 indent({lnum})			Number	indent of line {lnum}
@@ -2732,14 +2789,16 @@ localtime()			Number	current time
 log({expr})			Float	natural logarithm (base e) of {expr}
 log10({expr})			Float	logarithm of Float {expr} to base 10
 luaeval({expr} [, {expr}])	any	evaluate |Lua| expression
-map({expr1}, {expr2})		List/Dict  change each item in {expr1} to {expr}
+map({expr1}, {expr2})		List/Dict/Blob/String
+					change each item in {expr1} to {expr2}
 maparg({name} [, {mode} [, {abbr} [, {dict}]]])
 				String or Dict
 					rhs of mapping {name} in mode {mode}
 mapcheck({name} [, {mode} [, {abbr}]])
 				String	check for mappings matching {name}
-mapnew({expr1}, {expr2})	List/Dict  like |map()| but creates a new List
-					   or Dictionary
+mapnew({expr1}, {expr2})	List/Dict/Blob/String
+					like |map()| but creates a new List or
+					Dictionary
 mapset({mode}, {abbr}, {dict})	none	restore mapping from |maparg()| result
 match({expr}, {pat} [, {start} [, {count}]])
 				Number	position where {pat} matches in {expr}
@@ -2769,7 +2828,7 @@ mkdir({name} [, {path} [, {prot}]])
 mode([expr])			String	current editing mode
 mzeval({expr})			any	evaluate |MzScheme| expression
 nextnonblank({lnum})		Number	line nr of non-blank line >= {lnum}
-nr2char({expr} [, {utf8}])	String	single char with ASCII/UTF8 value {expr}
+nr2char({expr} [, {utf8}])	String	single char with ASCII/UTF-8 value {expr}
 or({expr}, {expr})		Number	bitwise OR
 pathshorten({expr} [, {len}])	String	shorten directory names in a path
 perleval({expr})		any	evaluate |Perl| expression
@@ -2787,7 +2846,7 @@ popup_getoptions({id})		Dict	get options of popup window {id}
 popup_getpos({id})		Dict	get position of popup window {id}
 popup_hide({id})		none	hide popup menu {id}
 popup_list()			List	get a list of window IDs of all popups
-popup_locate({row}, {col})	Number 	get window ID of popup at position
+popup_locate({row}, {col})	Number	get window ID of popup at position
 popup_menu({what}, {options})	Number	create a popup window used as a menu
 popup_move({id}, {options})	none	set position of popup window {id}
 popup_notification({what}, {options})
@@ -2899,7 +2958,7 @@ setenv({name}, {val})		none	set environment variable
 setfperm({fname}, {mode})	Number	set {fname} file permissions to {mode}
 setline({lnum}, {line})		Number	set line {lnum} to {line}
 setloclist({nr}, {list} [, {action}])
- 				Number	modify location list using {list}
+				Number	modify location list using {list}
 setloclist({nr}, {list}, {action}, {what})
 				Number	modify specific location list props
 setmatches({list} [, {win}])	Number	restore a list of matches
@@ -2959,7 +3018,7 @@ srand([{expr}])			List	get seed for |rand()|
 state([{what}])			String	current state of Vim
 str2float({expr} [, {quoted}])	Float	convert String to Float
 str2list({expr} [, {utf8}])	List	convert each character of {expr} to
-					ASCII/UTF8 value
+					ASCII/UTF-8 value
 str2nr({expr} [, {base} [, {quoted}]])
 				Number	convert String to Number
 strcharlen({expr})		Number	character length of the String {expr}
@@ -3656,7 +3715,7 @@ char2nr({string} [, {utf8}])					*char2nr()*
 		Example for "utf-8": >
 			char2nr("á")		returns 225
 			char2nr("á"[0])		returns 195
-<		With {utf8} set to TRUE, always treat as utf-8 characters.
+<		When {utf8} is TRUE, always treat as UTF-8 characters.
 		A combining character is a separate character.
 		|nr2char()| does the opposite.
 		To turn a string into a list of character numbers: >
@@ -4283,7 +4342,7 @@ digraph_getlist([{listall}])				*digraph_getlist()*
 
 digraph_set({chars}, {digraph})				*digraph_set()* *E1205*
 		Add digraph {chars} to the list.  {chars} must be a string
-		with two characters.  {digraph} is a string with one utf-8
+		with two characters.  {digraph} is a string with one UTF-8
 		encoded character. Be careful, composing characters are NOT
 		ignored.  This function is similar to |:digraphs| command, but
 		useful to add digraphs start with a white space.
@@ -4824,10 +4883,11 @@ filewritable({file})					*filewritable()*
 
 
 filter({expr1}, {expr2})				*filter()*
-		{expr1} must be a |List|, |Blob| or |Dictionary|.
+		{expr1} must be a |List|, |String|, |Blob| or |Dictionary|.
 		For each item in {expr1} evaluate {expr2} and when the result
-		is zero remove the item from the |List| or |Dictionary|. For a
-		|Blob| each byte is removed.
+		is zero or false remove the item from the |List| or
+		|Dictionary|.  Similarly for each byte in a |Blob| and each
+		charactor in a |String|.
 
 		{expr2} must be a |string| or |Funcref|.
 
@@ -4835,7 +4895,8 @@ filter({expr1}, {expr2})				*filter()*
 		of the current item.  For a |Dictionary| |v:key| has the key
 		of the current item and for a |List| |v:key| has the index of
 		the current item.  For a |Blob| |v:key| has the index of the
-		current byte.
+		current byte. For a |String| |v:key| has the index of the
+		current character.
 		Examples: >
 			call filter(mylist, 'v:val !~ "OLD"')
 <		Removes the items where "OLD" appears. >
@@ -4862,14 +4923,16 @@ filter({expr1}, {expr2})				*filter()*
 <		If you do not use "val" you can leave it out: >
 			call filter(myList, {idx -> idx % 2 == 1})
 <
-		The operation is done in-place.  If you want a |List| or
-		|Dictionary| to remain unmodified make a copy first: >
+		For a |List| and a |Dictionary| the operation is done
+		in-place.  If you want it to remain unmodified make a copy
+		first: >
 			:let l = filter(copy(mylist), 'v:val =~ "KEEP"')
 
-<		Returns {expr1}, the |List| , |Blob| or |Dictionary| that was
-		filtered.  When an error is encountered while evaluating
-		{expr2} no further items in {expr1} are processed.  When
-		{expr2} is a Funcref errors inside a function are ignored,
+<		Returns {expr1}, the |List| or |Dictionary| that was filtered,
+		or a new |Blob| or |String|. 
+		When an error is encountered while evaluating {expr2} no
+		further items in {expr1} are processed.
+		When {expr2} is a Funcref errors inside a function are ignored,
 		unless it was defined with the "abort" flag.
 
 		Can also be used as a |method|: >
@@ -4928,6 +4991,9 @@ flatten({list} [, {maxdepth}])					*flatten()*
 			:echo flatten([1, [2, [3, 4]], 5], 1)
 <			[1, 2, [3, 4], 5]
 
+		Can also be used as a |method|: >
+			mylist->flatten()
+<
 flattennew({list} [, {maxdepth}])			*flattennew()*
 		Like |flatten()| but first make a copy of {list}.
 
@@ -5605,7 +5671,7 @@ getcompletion({pat}, {type} [, {filtered}])		*getcompletion()*
 		buffer		buffer names
 		behave		:behave suboptions
 		color		color schemes
-		command		Ex command (and arguments)
+		command		Ex command
 		cmdline		|cmdline-completion| result
 		compiler	compilers
 		cscope		|:cscope| suboptions
@@ -5700,7 +5766,7 @@ getcursorcharpos([{winid}])
 <							*getcwd()*
 getcwd([{winnr} [, {tabnr}]])
 		The result is a String, which is the name of the current
-		working directory.
+		working directory.  'autochdir' is ignored.
 
 		With {winnr} return the local current directory of this window
 		in the current tab page.  {winnr} can be the window number or
@@ -5713,8 +5779,8 @@ getcwd([{winnr} [, {tabnr}]])
 		the working directory of the tabpage.
 		If {winnr} is zero use the current window, if {tabnr} is zero
 		use the current tabpage.
-		Without any arguments, return the working directory of the
-		current window.
+		Without any arguments, return the actual working directory of
+		the current window.
 		Return an empty string if the arguments are invalid.
 
 		Examples: >
@@ -5862,8 +5928,8 @@ getline({lnum} [, {end}])
 		digit, |line()| is called to translate the String into a Number.
 		To get the line under the cursor: >
 			getline(".")
-<		When {lnum} is smaller than 1 or bigger than the number of
-		lines in the buffer, an empty string is returned.
+<		When {lnum} is a number smaller than 1 or bigger than the
+		number of lines in the buffer, an empty string is returned.
 
 		When {end} is given the result is a |List| where each item is
 		a line from the current buffer in the range {lnum} to {end},
@@ -6126,8 +6192,9 @@ getreg([{regname} [, 1 [, {list}]]])			*getreg()*
 		The result is a String, which is the contents of register
 		{regname}.  Example: >
 			:let cliptext = getreg('*')
-<		When {regname} was not set the result is an empty string.
-		The {regname} argument is a string.
+<		When register {regname} was not set the result is an empty
+		string.
+		The {regname} argument must be a string.
 
 		getreg('=') returns the last evaluated value of the expression
 		register.  (For use in maps.)
@@ -6325,6 +6392,9 @@ getwininfo([{winid}])					*getwininfo()*
 					otherwise
 			wincol		leftmost screen column of the window;
 					"col" from |win_screenpos()|
+			textoff		number of columns occupied by any
+					'foldcolumn', 'signcolumn' and line
+					number in front of the text
 			winid		|window-ID|
 			winnr		window number
 			winrow		topmost screen line of the window;
@@ -6679,6 +6749,108 @@ hlexists({name})					*hlexists()*
 
 		Can also be used as a |method|: >
 			GetName()->hlexists()
+<
+hlget([{name} [, {resolve}]])				*hlget()*
+		Returns a List of all the highlight group attributes.  If the
+		optional {name} is specified, then returns a List with only
+		the attributes of the specified highlight group.  Returns an
+		empty List if the highlight group {name} is not present.
+
+		If the optional {resolve} argument is set to v:true and the
+		highlight group {name} is linked to another group, then the
+		link is resolved recursively and the attributes of the
+		resolved highlight group are returned.
+
+		Each entry in the returned List is a Dictionary with the
+		following items:
+			cleared	boolean flag, set to v:true if the highlight
+				group attributes are cleared or not yet
+				specified.  See |highlight-clear|.
+			cterm	cterm attributes. See |highlight-cterm|.
+			ctermbg	cterm background color.
+				See |highlight-ctermbg|.
+			ctermfg	cterm foreground color.
+				See |highlight-ctermfg|.
+			ctermul	cterm underline color.  See |highlight-ctermul|.
+			default boolean flag, set to v:true if the highlight
+				group link is a default link. See
+				|highlight-default|.
+			font	highlight group font.  See |highlight-font|.
+			gui	gui attributes. See |highlight-gui|.
+			guibg	gui background color.  See |highlight-guibg|.
+			guifg	gui foreground color.  See |highlight-guifg|.
+			guisp	gui special color.  See |highlight-guisp|.
+			id	highlight group ID.
+			linksto	linked highlight group name.
+				See |:highlight-link|.
+			name	highlight group name. See |group-name|.
+			start	start terminal keycode.  See |highlight-start|.
+			stop	stop terminal keycode.  See |highlight-stop|.
+			term	term attributes.  See |highlight-term|.
+
+		The 'term', 'cterm' and 'gui' items in the above Dictionary
+		have a dictionary value with the following optional boolean
+		items: 'bold', 'standout', 'underline', 'undercurl', 'italic',
+		'reverse', 'inverse' and 'strikethrough'.
+
+		Example(s): >
+			:echo hlget()
+			:echo hlget('ModeMsg')
+			:echo hlget('Number', v:true)
+<
+		Can also be used as a |method|: >
+			GetName()->hlget()
+<
+hlset({list})						*hlset()*
+		Creates or modifies the attributes of a List of highlight
+		groups.  Each item in {list} is a dictionary containing the
+		attributes of a highlight group. See |hlget()| for the list of
+		supported items in this dictionary.
+
+		In addition to the items described in |hlget()|, the following
+		additional items are supported in the dictionary:
+
+			force		boolean flag to force the creation of
+					a link for an existing highlight group
+					with attributes.
+
+		The highlight group is identified using the 'name' item and
+		the 'id' item (if supplied) is ignored.  If a highlight group
+		with a specified name doesn't exist, then it is created.
+		Otherwise the attributes of an existing highlight group are
+		modified.
+
+		If an empty dictionary value is used for the 'term' or 'cterm'
+		or 'gui' entries, then the corresponding attributes are
+		cleared.  If the 'cleared' item is set to v:true, then all the
+		attributes of the highlight group are cleared.
+
+		The 'linksto' item can be used to link a highlight group to
+		another highlight group.  See |:highlight-link|.
+
+		Returns zero for success, -1 for failure.
+
+		Example(s): >
+			" add bold attribute to the Visual highlight group
+			:call hlset([#{name: 'Visual',
+					\ term: #{reverse: 1 , bold: 1}}])
+			:call hlset([#{name: 'Type', guifg: 'DarkGreen'}])
+			:let l = hlget()
+			:call hlset(l)
+			" clear the Search highlight group
+			:call hlset([#{name: 'Search', cleared: v:true}])
+			" clear the 'term' attributes for a highlight group
+			:call hlset([#{name: 'Title', term: {}}])
+			" create the MyHlg group linking it to DiffAdd
+			:call hlset([#{name: 'MyHlg', linksto: 'DiffAdd'}])
+			" remove the MyHlg group link
+			:call hlset([#{name: 'MyHlg', linksto: 'NONE'}])
+			" clear the attributes and a link
+			:call hlset([#{name: 'MyHlg', cleared: v:true,
+					\ linksto: 'NONE'}])
+<
+		Can also be used as a |method|: >
+			GetAttrList()->hlset()
 <
 							*hlID()*
 hlID({name})	The result is a Number, which is the ID of the highlight group
@@ -7249,8 +7421,8 @@ list2str({list} [, {utf8}])				*list2str()*
 <		|str2list()| does the opposite.
 
 		When {utf8} is omitted or zero, the current 'encoding' is used.
-		With {utf8} is 1, always return utf-8 characters.
-		With utf-8 composing characters work as expected: >
+		When {utf8} is TRUE, always return UTF-8 characters.
+		With UTF-8 composing characters work as expected: >
 			list2str([97, 769])	returns "á"
 <
 		Can also be used as a |method|: >
@@ -7404,20 +7576,24 @@ luaeval({expr} [, {expr}])					*luaeval()*
 <		{only available when compiled with the |+lua| feature}
 
 map({expr1}, {expr2})					*map()*
-		{expr1} must be a |List|, |Blob| or |Dictionary|.
-		Replace each item in {expr1} with the result of evaluating
-		{expr2}.  For a |Blob| each byte is replaced.
+		{expr1} must be a |List|, |String|, |Blob| or |Dictionary|.
+		When {expr1} is a |List|| or |Dictionary|, replace each
+		item in {expr1} with the result of evaluating {expr2}.
+		For a |Blob| each byte is replaced.
+		For a |String|, each character, including composing
+		characters, is replaced.
 		If the item type changes you may want to use |mapnew()| to
 		create a new List or Dictionary.  This is required when using
 		Vim9 script.
 
-		{expr2} must be a |string| or |Funcref|.
+		{expr2} must be a |String| or |Funcref|.
 
-		If {expr2} is a |string|, inside {expr2} |v:val| has the value
+		If {expr2} is a |String|, inside {expr2} |v:val| has the value
 		of the current item.  For a |Dictionary| |v:key| has the key
 		of the current item and for a |List| |v:key| has the index of
 		the current item.  For a |Blob| |v:key| has the index of the
-		current byte.
+		current byte. For a |String| |v:key| has the index of the
+		current character.
 		Example: >
 			:call map(mylist, '"> " . v:val . " <"')
 <		This puts "> " before and " <" after each item in "mylist".
@@ -7443,14 +7619,15 @@ map({expr1}, {expr2})					*map()*
 <		If you do not use "key" you can use a short name: >
 			call map(myDict, {_, val -> 'item: ' . val})
 <
-		The operation is done in-place.  If you want a |List| or
-		|Dictionary| to remain unmodified make a copy first: >
+		The operation is done in-place for a |List| and |Dictionary|.
+		If you want it to remain unmodified make a copy first: >
 			:let tlist = map(copy(mylist), ' v:val . "\t"')
 
-<		Returns {expr1}, the |List|, |Blob| or |Dictionary| that was
-		filtered.  When an error is encountered while evaluating
-		{expr2} no further items in {expr1} are processed.  When
-		{expr2} is a Funcref errors inside a function are ignored,
+<		Returns {expr1}, the |List| or |Dictionary| that was filtered,
+		or a new |Blob| or |String|.
+		When an error is encountered while evaluating {expr2} no
+		further items in {expr1} are processed.
+		When {expr2} is a Funcref errors inside a function are ignored,
 		unless it was defined with the "abort" flag.
 
 		Can also be used as a |method|: >
@@ -7492,7 +7669,7 @@ maparg({name} [, {mode} [, {abbr} [, {dict}]]])			*maparg()*
 		  "lhs"	     The {lhs} of the mapping as it would be typed
 		  "lhsraw"   The {lhs} of the mapping as raw bytes
 		  "lhsrawalt" The {lhs} of the mapping as raw bytes, alternate
-		  	      form, only present when it differs from "lhsraw"
+			      form, only present when it differs from "lhsraw"
 		  "rhs"	     The {rhs} of the mapping as typed.
 		  "silent"   1 for a |:map-silent| mapping, else 0.
 		  "noremap"  1 if the {rhs} of the mapping is not remappable.
@@ -7646,6 +7823,7 @@ match({expr}, {pat} [, {start} [, {count}]])			*match()*
 		further down in the text.
 
 		Can also be used as a |method|: >
+			GetText()->match('word')
 			GetList()->match('word')
 <
 				*matchadd()* *E798* *E799* *E801* *E957*
@@ -7882,8 +8060,10 @@ matchlist({expr}, {pat} [, {start} [, {count}]])		*matchlist()*
 <		Results in: ['acd', 'a', '', 'c', 'd', '', '', '', '', '']
 		When there is no match an empty list is returned.
 
+		You can pass in a List, but that is not very useful.
+
 		Can also be used as a |method|: >
-			GetList()->matchlist('word')
+			GetText()->matchlist('word')
 
 matchstr({expr}, {pat} [, {start} [, {count}]])			*matchstr()*
 		Same as |match()|, but return the matched string.  Example: >
@@ -8154,7 +8334,7 @@ nr2char({expr} [, {utf8}])				*nr2char()*
 <		When {utf8} is omitted or zero, the current 'encoding' is used.
 		Example for "utf-8": >
 			nr2char(300)		returns I with bow character
-<		With {utf8} set to 1, always return utf-8 characters.
+<		When {utf8} is TRUE, always return UTF-8 characters.
 		Note that a NUL character in the file is specified with
 		nr2char(10), because NULs are represented with newline
 		characters.  nr2char(0) is a real NUL and terminates the
@@ -8324,15 +8504,18 @@ printf({fmt}, {expr1} ...)				*printf()*
 			field width.  If the converted value has fewer bytes
 			than the field width, it will be padded with spaces on
 			the left (or right, if the left-adjustment flag has
-			been given) to fill out the field width.
+			been given) to fill out the field width.  For the S
+			conversion the count is in cells.
 
 		.precision
 			An optional precision, in the form of a period '.'
 			followed by an optional digit string.  If the digit
 			string is omitted, the precision is taken as zero.
 			This gives the minimum number of digits to appear for
-			d, o, x, and X conversions, or the maximum number of
-			bytes to be printed from a string for s conversions.
+			d, o, x, and X conversions, the maximum number of
+			bytes to be printed from a string for s conversions,
+			or the maximum number of cells to be printed from a
+			string for S conversions.
 			For floating point it is the number of digits after
 			the decimal point.
 
@@ -8781,9 +8964,9 @@ readfile({fname} [, {type} [, {max}]])
 
 reduce({object}, {func} [, {initial}])			*reduce()* *E998*
 		{func} is called for every item in {object}, which can be a
-		|List| or a |Blob|.  {func} is called with two arguments: the
-		result so far and current item.  After processing all items
-		the result is returned.
+		|String|, |List| or a |Blob|.  {func} is called with two
+		arguments: the result so far and current item.  After
+		processing all items the result is returned.
 
 		{initial} is the initial result.  When omitted, the first item
 		in {object} is used and {func} is first called for the second
@@ -8794,6 +8977,7 @@ reduce({object}, {func} [, {initial}])			*reduce()* *E998*
 			echo reduce([1, 3, 5], { acc, val -> acc + val })
 			echo reduce(['x', 'y'], { acc, val -> acc .. val }, 'a')
 			echo reduce(0z1122, { acc, val -> 2 * acc + val })
+			echo reduce('xyz', { acc, val -> acc .. ',' .. val })
 <
 		Can also be used as a |method|: >
 			echo mylist->reduce({ acc, val -> acc + val }, 0)
@@ -9417,7 +9601,9 @@ searchcount([{options}])					*searchcount()*
 						|getpos()|
 						(default: cursor's position)
 
-
+		Can also be used as a |method|: >
+			GetSearchOpts()->searchcount()
+<
 searchdecl({name} [, {global} [, {thisblock}]])			*searchdecl()*
 		Search for the declaration of {name}.
 
@@ -9600,6 +9786,7 @@ setbufline({buf}, {lnum}, {text})			*setbufline()*
 		For the use of {buf}, see |bufname()| above.
 
 		{lnum} is used like with |setline()|.
+		Use "$" to refer to the last line in buffer {buf}.
 		When {lnum} is just below the last line the {text} will be
 		added below the last line.
 
@@ -9635,7 +9822,7 @@ setcellwidths({list})					*setcellwidths()*
 		tells Vim how wide characters are, counted in screen cells.
 		This overrides 'ambiwidth'.  Example: >
 		   setcellwidths([[0xad, 0xad, 1],
-		   		\ [0x2194, 0x2199, 2]])
+				\ [0x2194, 0x2199, 2]])
 
 <					*E1109* *E1110* *E1111* *E1112* *E1113*
 		The {list} argument is a list of lists with each three
@@ -9648,6 +9835,9 @@ setcellwidths({list})					*setcellwidths()*
 		range overlaps with another.
 		Only characters with value 0x100 and higher can be used.
 
+		If the new value causes 'fillchars' or 'listchars' to become
+		invalid it is rejected and an error is given.
+
 		To clear the overrides pass an empty list: >
 		   setcellwidths([]);
 <		You can use the script $VIMRUNTIME/tools/emoji_list.vim to see
@@ -10078,7 +10268,7 @@ settabwinvar({tabnr}, {winnr}, {varname}, {val})	*settabwinvar()*
 
 		Can also be used as a |method|, the base is passed as the
 		fourth argument: >
-			GetValue()->settabvar(tab, winnr, name)
+			GetValue()->settabwinvar(tab, winnr, name)
 
 settagstack({nr}, {dict} [, {action}])			*settagstack()*
 		Modify the tag stack of the window {nr} using {dict}.
@@ -10335,6 +10525,10 @@ sort({list} [, {func} [, {dict}]])			*sort()* *E702*
 <
 sound_clear()						*sound_clear()*
 		Stop playing all sounds.
+
+		On some Linux systems you may need the libcanberra-pulse
+		package, otherwise sound may not stop.
+
 		{only available when compiled with the |+sound| feature}
 
 							*sound_playevent()*
@@ -10387,6 +10581,9 @@ sound_stop({id})					*sound_stop()*
 		Stop playing sound {id}.  {id} must be previously returned by
 		`sound_playevent()` or `sound_playfile()`.
 
+		On some Linux systems you may need the libcanberra-pulse
+		package, otherwise sound may not stop.
+
 		On MS-Windows, this does not work for event sound started by
 		`sound_playevent()`. To stop event sounds, use `sound_clear()`.
 
@@ -10549,7 +10746,7 @@ state([{what}])						*state()*
 		    w	blocked on waiting, e.g. ch_evalexpr(), ch_read() and
 			ch_readraw() when reading json
 		    S	not triggering SafeState or SafeStateAgain, e.g. after
-		    	|f| or a count
+			|f| or a count
 		    c	callback invoked, including timer (repeats for
 			recursiveness up to "ccc")
 		    s	screen has scrolled for messages
@@ -10584,8 +10781,8 @@ str2list({string} [, {utf8}])					*str2list()*
 <		|list2str()| does the opposite.
 
 		When {utf8} is omitted or zero, the current 'encoding' is used.
-		With {utf8} set to 1, always treat the String as utf-8
-		characters.  With utf-8 composing characters are handled
+		When {utf8} is TRUE, always treat the String as UTF-8
+		characters.  With UTF-8 composing characters are handled
 		properly: >
 			str2list("á")		returns [97, 769]
 
@@ -10826,10 +11023,12 @@ strptime({format}, {timestring})				*strptime()*
 		  :echo strftime("%c", strptime("%Y%m%d%H%M%S", "19970427115355") + 3600)
 <		  Sun Apr 27 12:53:55 1997
 
+		Can also be used as a |method|: >
+			GetFormat()->strptime(timestring)
+<
 		Not available on all systems.  To check use: >
 			:if exists("*strptime")
 
-
 strridx({haystack}, {needle} [, {start}])			*strridx()*
 		The result is a Number, which gives the byte index in
 		{haystack} of the last occurrence of the String {needle}.
@@ -11098,10 +11297,10 @@ synstack({lnum}, {col})					*synstack()*
 		valid positions.
 
 system({expr} [, {input}])				*system()* *E677*
-		Get the output of the shell command {expr} as a string.  See
+		Get the output of the shell command {expr} as a |String|.  See
 		|systemlist()| to get the output as a |List|.
 
-		When {input} is given and is a string this string is written
+		When {input} is given and is a |String| this string is written
 		to a file and passed as stdin to the command.  The string is
 		written as-is, you need to take care of using the correct line
 		separators yourself.
@@ -11724,9 +11923,9 @@ wildmenumode()					*wildmenumode()*
 win_execute({id}, {command} [, {silent}])		*win_execute()*
 		Like `execute()` but in the context of window {id}.
 		The window will temporarily be made the current window,
-		without triggering autocommands.  When executing {command}
-		autocommands will be triggered, this may have unexpected side
-		effects.  Use |:noautocmd| if needed.
+		without triggering autocommands or changing directory.  When
+		executing {command} autocommands will be triggered, this may
+		have unexpected side effects.  Use |:noautocmd| if needed.
 		Example: >
 			call win_execute(winid, 'set syntax=python')
 <		Doing the same with `setwinvar()` would not trigger
@@ -11781,7 +11980,9 @@ win_gettype([{nr}])					*win_gettype()*
 		popup window then 'buftype' is "terminal" and win_gettype()
 		returns "popup".
 
-
+		Can also be used as a |method|: >
+			GetWinid()->win_gettype()
+<
 win_gotoid({expr})					*win_gotoid()*
 		Go to window with ID {expr}.  This may also change the current
 		tabpage.
@@ -12236,6 +12437,7 @@ multi_byte_encoding	'encoding' is set to a multibyte encoding.
 multi_byte_ime		Compiled with support for IME input method.
 multi_lang		Compiled with support for multiple languages.
 mzscheme		Compiled with MzScheme interface |mzscheme|.
+nanotime		Compiled with sub-second time stamp checks.
 netbeans_enabled	Compiled with support for |netbeans| and connected.
 netbeans_intg		Compiled with support for |netbeans|.
 num64			Compiled with 64-bit |Number| support.
@@ -13120,7 +13322,7 @@ text...
 			literal then the items also cannot be changed: >
 				const ll = [1, 2, 3]
 				let ll[1] = 5  " Error!
-< 			Nested references are not locked: >
+<			Nested references are not locked: >
 				let lvar = ['a']
 				const lconst = [0, lvar]
 				let lconst[0] = 2  " Error!
@@ -13174,8 +13376,8 @@ text...
 			Example with [depth] 0: >
 				let mylist = [1, 2, 3]
 				lockvar 0 mylist
-				let mylist[0] = 77   	" OK
-				call add(mylist, 4]  	" OK
+				let mylist[0] = 77	" OK
+				call add(mylist, 4]	" OK
 				let mylist = [7, 8, 9]  " Error!
 <								*E743*
 			For unlimited depth use [!] and omit [depth].

runtime/doc/filetype.txt

@@ -1,4 +1,4 @@
-*filetype.txt*  For Vim version 8.2.  Last change: 2021 Mar 11
+*filetype.txt*  For Vim version 8.2.  Last change: 2021 Sep 22
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -139,18 +139,19 @@ can be used to overrule the filetype used for certain extensions:
 
 	file name	variable ~
 	*.asa		g:filetype_asa	|ft-aspvbs-syntax| |ft-aspperl-syntax|
-	*.asp		g:filetype_asp	|ft-aspvbs-syntax| |ft-aspperl-syntax|
 	*.asm		g:asmsyntax	|ft-asm-syntax|
-	*.prg		g:filetype_prg
-	*.pl		g:filetype_pl
-	*.inc		g:filetype_inc
-	*.w		g:filetype_w	|ft-cweb-syntax|
+	*.asp		g:filetype_asp	|ft-aspvbs-syntax| |ft-aspperl-syntax|
+	*.fs		g:filetype_fs   |ft-forth-syntax|
 	*.i		g:filetype_i	|ft-progress-syntax|
+	*.inc		g:filetype_inc
 	*.m		g:filetype_m	|ft-mathematica-syntax|
 	*.p		g:filetype_p	|ft-pascal-syntax|
+	*.pl		g:filetype_pl
 	*.pp		g:filetype_pp	|ft-pascal-syntax|
+	*.prg		g:filetype_prg
 	*.sh		g:bash_is_sh	|ft-sh-syntax|
 	*.tex		g:tex_flavor	|ft-tex-plugin|
+	*.w		g:filetype_w	|ft-cweb-syntax|
 
 							*filetype-ignore*
 To avoid that certain files are being inspected, the g:ft_ignore_pat variable
@@ -545,7 +546,7 @@ One command, :DiffGitCached, is provided to show a diff of the current commit
 in the preview window.  It is equivalent to calling "git diff --cached" plus
 any arguments given to the command.
 
-GPROF
+GPROF							*ft-gprof-plugin*
 
 The gprof filetype plugin defines a mapping <C-]> to jump from a function
 entry in the gprof flat profile or from a function entry in the call graph

runtime/doc/gui_w32.txt

@@ -1,4 +1,4 @@
-*gui_w32.txt*   For Vim version 8.2.  Last change: 2021 Apr 05
+*gui_w32.txt*   For Vim version 8.2.  Last change: 2021 Oct 24
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -323,20 +323,10 @@ These extra colors are also available:
 Gray, Grey, LightYellow, SeaGreen, Orange, Purple, SlateBlue, Violet,
 
 								*rgb.txt*
-Additionally, colors defined by a "rgb.txt" file can be used.  This file is
-well known from X11.  A few lines from it: >
-
-  255 218 185		   peach puff
-  205 133  63		   peru
-  255 181 197		   pink
-
-This shows the layout of the file:  First the R, G and B value as a decimal
-number, followed by the name of the color.  The four fields are separated by
-spaces.
-
-You can get an rgb.txt file from any X11 distribution.  It is located in a
-directory like "/usr/X11R6/lib/X11/".  For Vim it must be located in the
-$VIMRUNTIME directory.  Thus the file can be found with "$VIMRUNTIME/rgb.txt".
+Additionally, colors defined by a default color list can be used.  For more
+info see |:colorscheme|.  These colors used to be defined in
+$VIMRUNTIME/rgb.txt, now they are in |v:colornames| which is initialized from
+$VIMRUNTIME/colors/lists/default.vim.
 
 ==============================================================================
 						*gui-w32-dialogs* *dialog*

runtime/doc/help.txt

@@ -88,6 +88,7 @@ Tuning Vim ~
 |usr_43.txt|  Using filetypes
 |usr_44.txt|  Your own syntax highlighted
 |usr_45.txt|  Select your language
+|usr_46.txt|  Write plugins using Vim9 script
 
 Making Vim Run ~
 |usr_90.txt|  Installing Vim

runtime/doc/helphelp.txt

@@ -1,4 +1,4 @@
-*helphelp.txt*	For Vim version 8.2.  Last change: 2020 Dec 29
+*helphelp.txt*	For Vim version 8.2.  Last change: 2021 Dec 13
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -163,7 +163,7 @@ If you would like to open the help in the current window, see this tip:
 
 The initial height of the help window can be set with the 'helpheight' option
 (default 20).
-
+						*help-buffer-options*
 When the help buffer is created, several local options are set to make sure
 the help text is displayed as it was intended:
     'iskeyword'		nearly all ASCII chars except ' ', '*', '"' and '|'
@@ -323,21 +323,25 @@ Hints for translators:
 3. Writing help files					*help-writing*
 
 For ease of use, a Vim help file for a plugin should follow the format of the
-standard Vim help files.  If you are writing a new help file it's best to copy
-one of the existing files and use it as a template.
+standard Vim help files, except for the first line.  If you are writing a new
+help file it's best to copy one of the existing files and use it as a
+template.
 
 The first line in a help file should have the following format:
 
-*helpfile_name.txt*	For Vim version 7.3	Last change: 2010 June 4
+*plugin_name.txt*	{short description of the plugin}
 
-The first field is a link to the help file name.  The second field describes
-the applicable Vim version.  The last field specifies the last modification
-date of the file.  Each field is separated by a tab.
+The first field is a help tag where ":help plugin_name" will jump to.  The
+remainder of the line, after a Tab, describes the plugin purpose in a short
+way.  This will show up in the "LOCAL ADDITIONS" section of the main help
+file.  Check there that it shows up properly: |local-additions|.
+
+If you want to add a version number or last modification date, put it in the
+second line, right aligned.
 
 At the bottom of the help file, place a Vim modeline to set the 'textwidth'
 and 'tabstop' options and the 'filetype' to "help".  Never set a global option
-in such a modeline, that can have consequences undesired by whoever reads that
-help.
+in such a modeline, that can have undesired consequences.
 
 
 TAGS

runtime/doc/if_lua.txt

@@ -227,14 +227,14 @@ Vim evaluation and command execution, and others.
                                                         *lua-vim-variables*
 The Vim editor global dictionaries |g:| |w:| |b:| |t:| |v:| can be accessed
 from Lua conveniently and idiomatically by referencing the `vim.*` Lua tables
-described below. In this way you can easily read and modify global Vimscript
+described below. In this way you can easily read and modify global Vim script
 variables from Lua.
 
 Example: >
 
-    vim.g.foo = 5     -- Set the g:foo Vimscript variable.
-    print(vim.g.foo)  -- Get and print the g:foo Vimscript variable.
-    vim.g.foo = nil   -- Delete (:unlet) the Vimscript variable.
+    vim.g.foo = 5     -- Set the g:foo Vim script variable.
+    print(vim.g.foo)  -- Get and print the g:foo Vim script variable.
+    vim.g.foo = nil   -- Delete (:unlet) the Vim script variable.
 
 vim.g                                                   *vim.g*
         Global (|g:|) editor variables.

runtime/doc/if_pyth.txt

@@ -1,4 +1,4 @@
-*if_pyth.txt*   For Vim version 8.2.  Last change: 2019 Dec 07
+*if_pyth.txt*   For Vim version 8.2.  Last change: 2021 Nov 12
 
 
 		  VIM REFERENCE MANUAL    by Paul Moore
@@ -63,6 +63,11 @@ To see what version of Python you have: >
 
 There is no need to import sys, it's done by default.
 
+							*python-environment*
+Environment variables set in Vim are not always available in Python.  This
+depends on how Vim and Python were build.  Also see
+https://docs.python.org/3/library/os.html#os.environ
+
 Note: Python is very sensitive to the indenting.  Make sure the "class" line
 and "EOF" do not have any indent.
 

runtime/doc/indent.txt

@@ -608,26 +608,25 @@ CLOJURE					*ft-clojure-indent* *clojure-indent*
 Clojure indentation differs somewhat from traditional Lisps, due in part to
 the use of square and curly brackets, and otherwise by community convention.
 These conventions are not universally followed, so the Clojure indent script
-offers a few configurable options, listed below.
+offers a few configuration options.
+
+(If the current Vim does not include |searchpairpos()|, the indent script falls
+back to normal 'lisp' indenting, and the following options are ignored.)
 
-If the current vim does not include searchpairpos(), the indent script falls
-back to normal 'lisp' indenting, and the following options are ignored.
 
 							*g:clojure_maxlines*
 
-Set maximum scan distance of searchpairpos(). Larger values trade performance
-for correctness when dealing with very long forms. A value of 0 will scan
-without limits.
->
-	" Default
-	let g:clojure_maxlines = 100
-<
+Sets maximum scan distance of `searchpairpos()`.  Larger values trade
+performance for correctness when dealing with very long forms.  A value of
+0 will scan without limits.  The default is 300.
+
+
 						*g:clojure_fuzzy_indent*
 					*g:clojure_fuzzy_indent_patterns*
 					*g:clojure_fuzzy_indent_blacklist*
 
 The 'lispwords' option is a list of comma-separated words that mark special
-forms whose subforms must be indented with two spaces.
+forms whose subforms should be indented with two spaces.
 
 For example:
 >
@@ -645,15 +644,11 @@ the fuzzy indent feature:
 	let g:clojure_fuzzy_indent_patterns = ['^with', '^def', '^let']
 	let g:clojure_fuzzy_indent_blacklist =
 		\ ['-fn$', '\v^with-%(meta|out-str|loading-context)$']
-
-	" Legacy comma-delimited string version; the list format above is
-	" recommended. Note that patterns are implicitly anchored with ^ and $
-	let g:clojure_fuzzy_indent_patterns = 'with.*,def.*,let.*'
 <
 |g:clojure_fuzzy_indent_patterns| and |g:clojure_fuzzy_indent_blacklist| are
-|Lists| of patterns that will be matched against the unquoted, unqualified
-symbol at the head of a list. This means that a pattern like "^foo" will match
-all these candidates: "foobar", "my.ns/foobar", and "#'foobar".
+lists of patterns that will be matched against the unqualified symbol at the
+head of a list.  This means that a pattern like `"^foo"` will match all these
+candidates: `foobar`, `my.ns/foobar`, and `#'foobar`.
 
 Each candidate word is tested for special treatment in this order:
 
@@ -664,20 +659,22 @@ Each candidate word is tested for special treatment in this order:
 	   |g:clojure_fuzzy_indent_patterns|
 	4. Return false and indent normally otherwise
 
+
 					*g:clojure_special_indent_words*
 
-Some forms in Clojure are indented so that every subform is indented only two
-spaces, regardless of 'lispwords'. If you have a custom construct that should
-be indented in this idiosyncratic fashion, you can add your symbols to the
-default list below.
+Some forms in Clojure are indented such that every subform is indented by only
+two spaces, regardless of 'lispwords'.  If you have a custom construct that
+should be indented in this idiosyncratic fashion, you can add your symbols to
+the default list below.
 >
 	" Default
 	let g:clojure_special_indent_words =
 	   \ 'deftype,defrecord,reify,proxy,extend-type,extend-protocol,letfn'
 <
+
 					*g:clojure_align_multiline_strings*
 
-Align subsequent lines in multiline strings to the column after the opening
+Align subsequent lines in multi-line strings to the column after the opening
 quote, instead of the same column.
 
 For example:
@@ -694,11 +691,7 @@ For example:
 	   enim ad minim veniam, quis nostrud exercitation ullamco laboris
 	   nisi ut aliquip ex ea commodo consequat.")
 <
-This option is off by default.
->
-	" Default
-	let g:clojure_align_multiline_strings = 0
-<
+
 						*g:clojure_align_subforms*
 
 By default, parenthesized compound forms that look like function calls and
@@ -709,18 +702,14 @@ two spaces relative to the opening paren:
 	  bar
 	  baz)
 <
-Setting this option changes this behavior so that all subforms are aligned to
-the same column, emulating the default behavior of clojure-mode.el:
+Setting this option to `1` changes this behaviour so that all subforms are
+aligned to the same column, emulating the default behaviour of
+clojure-mode.el:
 >
 	(foo
 	 bar
 	 baz)
 <
-This option is off by default.
->
-	" Default
-	let g:clojure_align_subforms = 0
-<
 
 FORTRAN							*ft-fortran-indent*
 

runtime/doc/insert.txt

@@ -1,4 +1,4 @@
-*insert.txt*    For Vim version 8.2.  Last change: 2021 Aug 31
+*insert.txt*    For Vim version 8.2.  Last change: 2021 Oct 24
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -824,6 +824,9 @@ CTRL-X CTRL-K		Search the files given with the 'dictionary' option
 	CTRL-P		Search backwards for next matching keyword.  This
 			keyword replaces the previous matching keyword.
 
+
+Completing words in 'thesaurus'				*compl-thesaurus*
+
 							*i_CTRL-X_CTRL-T*
 CTRL-X CTRL-T		Works as CTRL-X CTRL-K, but in a special way.  It uses
 			the 'thesaurus' option instead of 'dictionary'.  If a
@@ -832,16 +835,6 @@ CTRL-X CTRL-T		Works as CTRL-X CTRL-K, but in a special way.  It uses
 			matches, even though they don't complete the word.
 			Thus a word can be completely replaced.
 
-			For an example, imagine the 'thesaurus' file has a
-			line like this: >
-				angry furious mad enraged
-<			Placing the cursor after the letters "ang" and typing
-			CTRL-X CTRL-T would complete the word "angry";
-			subsequent presses would change the word to "furious",
-			"mad" etc.
-			Other uses include translation between two languages,
-			or grouping API functions by keyword.
-
 	CTRL-T	or
 	CTRL-N		Search forward for next matching keyword.  This
 			keyword replaces the previous matching keyword.
@@ -849,6 +842,57 @@ CTRL-X CTRL-T		Works as CTRL-X CTRL-K, but in a special way.  It uses
 	CTRL-P		Search backwards for next matching keyword.  This
 			keyword replaces the previous matching keyword.
 
+In the file used by the 'thesaurus' option each line in the file should
+contain words with similar meaning, separated by non-keyword characters (white
+space is preferred).  Maximum line length is 510 bytes.
+
+For an example, imagine the 'thesaurus' file has a line like this: >
+	angry furious mad enraged
+<Placing the cursor after the letters "ang" and typing CTRL-X CTRL-T would
+complete the word "angry"; subsequent presses would change the word to
+"furious", "mad" etc.
+
+Other uses include translation between two languages, or grouping API
+functions by keyword.
+
+An English word list was added to this github issue:
+https://github.com/vim/vim/issues/629#issuecomment-443293282
+Unpack thesaurus_pkg.zip, put the thesaurus.txt file somewhere, e.g.
+~/.vim/thesaurus/english.txt, and the 'thesaurus' option to this file name.
+
+					
+Completing keywords with 'thesaurusfunc'		*compl-thesaurusfunc*
+
+If the 'thesaurusfunc' option is set, then the user specified function is
+invoked to get the list of completion matches and the 'thesaurus' option is
+not used. See |complete-functions| for an explanation of how the function is
+invoked and what it should return.
+
+Here is an example that uses the "aiksaurus" command (provided by Magnus
+Groß): >
+
+    func Thesaur(findstart, base)
+      if a:findstart
+    	return searchpos('\<', 'bnW', line('.'))[1] - 1
+      endif
+      let res = []
+      let h = ''
+      for l in systemlist('aiksaurus '.shellescape(a:base))
+	if l[:3] == '=== '
+	  let h = '('.substitute(l[4:], ' =*$', ')', '')
+	elseif l ==# 'Alphabetically similar known words are: '
+	  let h = "\U0001f52e"
+	elseif l[0] =~ '\a' || (h ==# "\U0001f52e" && l[0] ==# "\t")
+	  call extend(res, map(split(substitute(l, '^\t', '', ''), ', '), {_, val -> {'word': val, 'menu': h}}))
+	endif
+      endfor
+      return res
+    endfunc
+    
+    if exists('+thesaurusfunc')
+      set thesaurusfunc=Thesaur
+    endif
+
 
 Completing keywords in the current and included files	*compl-keyword*
 
@@ -1052,7 +1096,7 @@ CTRL-X CTRL-Z		Stop completion without changing the text.
 
 FUNCTIONS FOR FINDING COMPLETIONS			*complete-functions*
 
-This applies to 'completefunc' and 'omnifunc'.
+This applies to 'completefunc', 'thesaurusfunc' and 'omnifunc'.
 
 The function is called in two different ways:
 - First the function is called to find the start of the text to be completed.

runtime/doc/intro.txt

@@ -1,4 +1,4 @@
-*intro.txt*     For Vim version 8.2.  Last change: 2020 Dec 29
+*intro.txt*     For Vim version 8.2.  Last change: 2021 Sep 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -421,7 +421,6 @@ notation	meaning		    equivalent	decimal value(s)	~
 <Tab>		tab			CTRL-I	  9	*tab* *Tab*
 							*linefeed*
 <NL>		linefeed		CTRL-J	 10 (used for <Nul>)
-<FF>		formfeed		CTRL-L	 12	*formfeed*
 <CR>		carriage return		CTRL-M	 13	*carriage-return*
 <Return>	same as <CR>				*<Return>*
 <Enter>		same as <CR>				*<Enter>*

runtime/doc/map.txt

@@ -1,4 +1,4 @@
-*map.txt*       For Vim version 8.2.  Last change: 2021 Sep 12
+*map.txt*       For Vim version 8.2.  Last change: 2021 Dec 20
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -61,6 +61,8 @@ modes.
 			where the map command applies.  The result, including
 			{rhs}, is then further scanned for mappings.  This
 			allows for nested and recursive use of mappings.
+			Note: Trailing spaces are included in the {rhs},
+			because space is a valid Normal mode command.
 
 						*:nore* *:norem*
 :no[remap]  {lhs} {rhs}		|mapmode-nvo|	*:no*  *:noremap* *:nor*
@@ -94,6 +96,9 @@ modes.
 			Remove the mapping of {lhs} for the modes where the
 			map command applies.  The mapping may remain defined
 			for other modes where it applies.
+			It also works when {lhs} matches the {rhs} of a
+			mapping. This is for when when an abbreviation
+			applied.
 			Note: Trailing spaces are included in the {lhs}.  This
 			unmap does NOT work: >
 				:map @@ foo
@@ -168,7 +173,7 @@ type "a", then "bar" will get inserted.
 "<unique>" can be used in any order.  They must appear right after the
 command, before any other arguments.
 
-				*:map-local* *:map-<buffer>* *E224* *E225*
+			*:map-local* *:map-<buffer>* *:map-buffer* *E224* *E225*
 If the first argument to one of these commands is "<buffer>" the mapping will
 be effective in the current buffer only.  Example: >
 	:map <buffer>  ,w  /[.,;]<CR>
@@ -227,7 +232,7 @@ Note: ":map <script>" and ":noremap <script>" do the same thing.  The
 "<script>" overrules the command name.  Using ":noremap <script>" is
 preferred, because it's clearer that remapping is (mostly) disabled.
 
-						*:map-<unique>* *E226* *E227*
+				*:map-<unique>* *:map-unique* *E226* *E227*
 If the first argument to one of these commands is "<unique>" and it is used to
 define a new mapping or abbreviation, the command will fail if the mapping or
 abbreviation already exists.  Example: >
@@ -344,6 +349,8 @@ Note:
 - For the same reason, |keycodes| like <C-R><C-W> are interpreted as plain,
   unmapped keys.
 - The command is not echo'ed, no need for <silent>.
+- The {rhs} is not subject to abbreviations nor to other mappings, even if the
+  mapping is recursive.
 - In Visual mode  you can use `line('v')` and `col('v')` to get one end of the
   Visual area, the cursor is at the other end.
 - In Select mode, |:map| and |:vmap| command mappings are executed in
@@ -955,8 +962,7 @@ g@{motion}		Call the function set by the 'operatorfunc' option.
 			    "line"	{motion} was |linewise|
 			    "char"	{motion} was |characterwise|
 			    "block"	{motion} was |blockwise-visual|
-			Although "block" would rarely appear, since it can
-			only result from Visual mode where "g@" is not useful.
+			The type can be forced, see |forced-motion|.
 			{not available when compiled without the |+eval|
 			feature}
 
@@ -967,28 +973,56 @@ Here is an example that counts the number of spaces with <F4>: >
 	" doubling <F4> works on a line
 	nnoremap <expr> <F4><F4> CountSpaces() .. '_'
 
-	function CountSpaces(type = '') abort
+	function CountSpaces(context = {}, type = '') abort
 	  if a:type == ''
-	    set opfunc=CountSpaces
+	    let context = #{
+	      \ dot_command: v:false,
+	      \ extend_block: '',
+	      \ virtualedit: [&l:virtualedit, &g:virtualedit],
+	      \ }
+	    let &operatorfunc = function('CountSpaces', [context])
+	    set virtualedit=block
 	    return 'g@'
- 	  endif
+	  endif
 
-	  let sel_save = &selection
-	  let reg_save = getreginfo('"')
-	  let cb_save = &clipboard
-	  let visual_marks_save = [getpos("'<"), getpos("'>")]
+	  let save = #{
+	    \ clipboard: &clipboard,
+	    \ selection: &selection,
+	    \ virtualedit: [&l:virtualedit, &g:virtualedit],
+	    \ register: getreginfo('"'),
+	    \ visual_marks: [getpos("'<"), getpos("'>")],
+	    \ }
 
 	  try
-	    set clipboard= selection=inclusive
-	    let commands = #{line: "'[V']y", char: "`[v`]y", block: "`[\<c-v>`]y"}
-	    silent exe 'noautocmd keepjumps normal! ' .. get(commands, a:type, '')
-	    echom getreg('"')->count(' ')
+	    set clipboard= selection=inclusive virtualedit=
+	    let commands = #{
+	      \ line: "'[V']",
+	      \ char: "`[v`]",
+	      \ block: "`[\<C-V>`]",
+	      \ }[a:type]
+	    let [_, _, col, off] = getpos("']")
+	    if off != 0
+	      let vcol = getline("'[")->strpart(0, col + off)->strdisplaywidth()
+	      if vcol >= [line("'["), '$']->virtcol() - 1
+	        let a:context.extend_block = '$'
+	      else
+	        let a:context.extend_block = vcol .. '|'
+	      endif
+	    endif
+	    if a:context.extend_block != ''
+	      let commands ..= 'oO' .. a:context.extend_block
+	    endif
+	    let commands ..= 'y'
+	    execute 'silent noautocmd keepjumps normal! ' .. commands
+	    echomsg getreg('"')->count(' ')
 	  finally
-	    call setreg('"', reg_save)
-	    call setpos("'<", visual_marks_save[0])
-	    call setpos("'>", visual_marks_save[1])
-	    let &clipboard = cb_save
-	    let &selection = sel_save
+	    call setreg('"', save.register)
+	    call setpos("'<", save.visual_marks[0])
+	    call setpos("'>", save.visual_marks[1])
+	    let &clipboard = save.clipboard
+	    let &selection = save.selection
+	    let [&l:virtualedit, &g:virtualedit] = get(a:context.dot_command ? save : a:context, 'virtualedit')
+	    let a:context.dot_command = v:true
 	  endtry
 	endfunction
 
@@ -1004,6 +1038,20 @@ Also note that the 'clipboard' option is temporarily emptied to avoid
 clobbering the `"*` or `"+` registers, if its value contains the item `unnamed`
 or `unnamedplus`.
 
+The `mode()` function will return the state as it will be after applying the
+operator.
+
+Here is an example for using a lambda function to create a normal-mode
+operator to add quotes around text in the current line: >
+
+	nnoremap <F4> <Cmd>let &opfunc='{t ->
+				\ getline(".")
+				\ ->split("\\zs")
+				\ ->insert("\"", col("'']"))
+				\ ->insert("\"", col("''[") - 1)
+				\ ->join("")
+				\ ->setline(".")}'<CR>g@
+
 ==============================================================================
 2. Abbreviations			*abbreviations* *Abbreviations*
 
@@ -1557,6 +1605,7 @@ Possible values are (second column is the short name used in listing):
 Special cases ~
 					*:command-bang* *:command-bar*
 					*:command-register* *:command-buffer*
+					*:command-keepscript*
 There are some special cases as well:
 
 	-bang	    The command can take a ! modifier (like :q or :w)
@@ -1566,6 +1615,9 @@ There are some special cases as well:
 	-register   The first argument to the command can be an optional
 		    register name (like :del, :put, :yank).
 	-buffer	    The command will only be available in the current buffer.
+	-keepscript Do not use the location of where the user command was
+		    defined for verbose messages, use the location of where
+		    the user command was invoked.
 
 In the cases of the -count and -register attributes, if the optional argument
 is supplied, it is removed from the argument list and is available to the

runtime/doc/mbyte.txt

@@ -1,4 +1,4 @@
-*mbyte.txt*     For Vim version 8.2.  Last change: 2021 Apr 05
+*mbyte.txt*     For Vim version 8.2.  Last change: 2021 Oct 04
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar et al.
@@ -1132,7 +1132,7 @@ This file explains what characters are available in UTF-8 and CP1255 encodings,
 and what the keymaps are to get those characters:
 
 glyph   encoding	   keymap ~
-Char   utf-8 cp1255  hebrew  hebrewp  name ~
+Char UTF-8 cp1255  hebrew  hebrewp  name ~
 א    0x5d0  0xe0     t	      a     'alef
 ב    0x5d1  0xe1     c	      b     bet
 ג    0x5d2  0xe2     d	      g     gimel
@@ -1185,11 +1185,11 @@ Vowel marks and special punctuation:
 ױ    0x5f1  0xd5     VY      VY   vav-yod
 ײ    0x5f2  0xd6     YY      YY   yod-yod
 
-The following are only available in utf-8
+The following are only available in UTF-8
 
 Cantillation marks:
 glyph
-Char utf-8 hebrew name
+Char UTF-8 hebrew name
 ב֑    0x591   C:   etnahta
 ב֒    0x592   Cs   segol
 ב֓    0x593   CS   shalshelet
@@ -1300,7 +1300,7 @@ ASCII.   On MS-Windows UTF-16 is also used (previously UCS-2), which uses
 internally.
 
 Vim has comprehensive UTF-8 support.  It works well in:
-- xterm with utf-8 support enabled
+- xterm with UTF-8 support enabled
 - Athena, Motif and GTK GUI
 - MS-Windows GUI
 - several other platforms
@@ -1313,13 +1313,13 @@ is no longer relevant in the GTK+ 2 GUI.
 							*bom-bytes*
 When reading a file a BOM (Byte Order Mark) can be used to recognize the
 Unicode encoding:
-	EF BB BF     utf-8
-	FE FF        utf-16 big endian
-	FF FE        utf-16 little endian
-	00 00 FE FF  utf-32 big endian
-	FF FE 00 00  utf-32 little endian
+	EF BB BF     UTF-8
+	FE FF        UTF-16 big endian
+	FF FE        UTF-16 little endian
+	00 00 FE FF  UTF-32 big endian
+	FF FE 00 00  UTF-32 little endian
 
-Utf-8 is the recommended encoding.  Note that it's difficult to tell utf-16
+UTF-8 is the recommended encoding.  Note that it's difficult to tell utf-16
 and utf-32 apart.  Utf-16 is often used on MS-Windows, utf-32 is not
 widespread as file format.
 
@@ -1365,8 +1365,8 @@ Useful commands:
 
 STARTING VIM
 
-If your current locale is in an utf-8 encoding, Vim will automatically start
-in utf-8 mode.
+If your current locale is in an UTF-8 encoding, Vim will automatically start
+in UTF-8 mode.
 
 If you are using another locale: >
 
@@ -1399,10 +1399,10 @@ Motif.  Use the ":hi Menu font={fontname}" command for this. |:highlight|
 TYPING UTF-8						*utf-8-typing*
 
 If you are using X-Windows, you should find an input method that supports
-utf-8.
+UTF-8.
 
-If your system does not provide support for typing utf-8, you can use the
-'keymap' feature.  This allows writing a keymap file, which defines a utf-8
+If your system does not provide support for typing UTF-8, you can use the
+'keymap' feature.  This allows writing a keymap file, which defines a UTF-8
 character as a sequence of ASCII characters.  See |mbyte-keymap|.
 
 Another method is to set the current locale to the language you want to use

runtime/doc/message.txt

@@ -1,4 +1,4 @@
-*message.txt*   For Vim version 8.2.  Last change: 2021 Jul 31
+*message.txt*   For Vim version 8.2.  Last change: 2021 Dec 13
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -29,8 +29,7 @@ depends on the 'shortmess' option.
 				Clear messages, keeping only the {count} most
 				recent ones.
 
-The number of remembered messages is fixed at 20 for the tiny version and 200
-for other versions.
+The number of remembered messages is fixed at 200.
 
 								*g<*
 The "g<" command can be used to see the last page of previous command output.
@@ -141,6 +140,11 @@ larger.  When it's more there probably is an endless loop.  Probably a
 The color name {name} is unknown.  See |gui-colors| for a list of colors that
 are available on most systems.
 
+							*E1244*  >
+  Bad color string: {str}
+
+The provided color did not conform to the pattern #rrggbb
+
 							*E458*  >
   Cannot allocate colormap entry, some colors may be incorrect
 

runtime/doc/motion.txt

@@ -1,4 +1,4 @@
-*motion.txt*    For Vim version 8.2.  Last change: 2021 Jun 13
+*motion.txt*    For Vim version 8.2.  Last change: 2021 Dec 13
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -386,6 +386,8 @@ w			[count] words forward.  |exclusive| motion.
 
 <C-Right>	or					*<C-Right>* *W*
 W			[count] WORDS forward.  |exclusive| motion.
+			If <C-Right> does not work, check out
+			|arrow_modifiers|.
 
 							*e*
 e			Forward to the end of word [count] |inclusive|.
@@ -400,6 +402,8 @@ b			[count] words backward.  |exclusive| motion.
 
 <C-Left>	or					*<C-Left>* *B*
 B			[count] WORDS backward.  |exclusive| motion.
+			If <C-Left> does not work, check out
+			|arrow_modifiers|.
 
 							*ge*
 ge			Backward to the end of word [count] |inclusive|.
@@ -1034,12 +1038,10 @@ commands that start editing a new file.
 							*CTRL-O*
 CTRL-O			Go to [count] Older cursor position in jump list
 			(not a motion command).
-			{not available without the |+jumplist| feature}
 
 <Tab>		or					*CTRL-I* *<Tab>*
 CTRL-I			Go to [count] newer cursor position in jump list
 			(not a motion command).
-			{not available without the |+jumplist| feature}
 
 			NOTE: In the GUI and in a terminal supporting
 			|modifyOtherKeys|, CTRL-I can be mapped separately
@@ -1049,18 +1051,15 @@ CTRL-I			Go to [count] newer cursor position in jump list
 
 							*:ju* *:jumps*
 :ju[mps]		Print the jump list (not a motion command).
-			{not available without the |+jumplist| feature}
 
 							*:cle* *:clearjumps*
 :cle[arjumps]		Clear the jump list of the current window.
-			{not available without the |+jumplist| feature}
 
 							*jumplist*
 Jumps are remembered in a jump list.  With the CTRL-O and CTRL-I command you
 can go to cursor positions before older jumps, and back again.  Thus you can
 move up and down the list.  There is a separate jump list for each window.
 The maximum number of entries is fixed at 100.
-{not available without the |+jumplist| feature}
 
 For example, after three jump commands you have this jump list:
 
@@ -1137,13 +1136,11 @@ g;			Go to [count] older position in change list.
 			positions go to the oldest change.
 			If there is no older change an error message is given.
 			(not a motion command)
-			{not available without the |+jumplist| feature}
 
 							*g,* *E663*
 g,			Go to [count] newer cursor position in change list.
 			Just like |g;| but in the opposite direction.
 			(not a motion command)
-			{not available without the |+jumplist| feature}
 
 When using a count you jump as far back or forward as possible.  Thus you can
 use "999g;" to go to the first change for which the position is still

runtime/doc/options.txt

@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 8.2.  Last change: 2021 Sep 21
+*options.txt*	For Vim version 8.2.  Last change: 2021 Dec 21
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -35,6 +35,8 @@ achieve special effects.  These options come in three forms:
 			internally and can't be changed.  Changing the terminal
 			codes in the GUI is not useful either...
 
+:se[t]! termcap		Idem, but don't use multiple columns.
+
 								*E518* *E519*
 :se[t] {option}?	Show value of {option}.
 
@@ -371,6 +373,30 @@ Note: In the future more global options can be made global-local.  Using
 ":setlocal" on a global option might work differently then.
 
 
+						*option-value-function*
+Some options ('completefunc', 'imactivatefunc', 'imstatusfunc', 'omnifunc',
+'operatorfunc', 'quickfixtextfunc', 'tagfunc' and 'thesaurusfunc') are set to
+a function name or a function reference or a lambda function.  When using a
+lambda it will be converted to the name, e.g. "<lambda>123".  Examples:
+>
+	set opfunc=MyOpFunc
+	set opfunc=function('MyOpFunc')
+	set opfunc=funcref('MyOpFunc')
+	set opfunc={a\ ->\ MyOpFunc(a)}
+	" set using a funcref variable
+	let Fn = function('MyTagFunc')
+	let &tagfunc = Fn
+	" set using a lambda expression
+	let &tagfunc = {t -> MyTagFunc(t)}
+	" set using a variable with lambda expression
+	let L = {a, b, c -> MyTagFunc(a, b , c)}
+	let &tagfunc = L
+
+In Vim9 script, in a compiled function, you can use a lambda, but a
+closured does not work, because the function will be called without the
+context of where it was defined.
+
+
 Setting the filetype
 
 :setf[iletype] [FALLBACK] {filetype}			*:setf* *:setfiletype*
@@ -717,7 +743,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	"double":	Use twice the width of ASCII characters.
 							*E834* *E835*
 	The value "double" cannot be used if 'listchars' or 'fillchars'
-	contains a character that would be double width.
+	contains a character that would be double width.  These errors may
+	also be given when calling setcellwidths().
 
 	The values are overruled for characters specified with
 	|setcellwidths()|.
@@ -849,9 +876,12 @@ A jump table for the options with a short description can be found at |Q_op|.
 'autowrite' 'aw'	boolean	(default off)
 			global
 	Write the contents of the file, if it has been modified, on each
-	:next, :rewind, :last, :first, :previous, :stop, :suspend, :tag, :!,
-	:make, CTRL-] and CTRL-^ command; and when a :buffer, CTRL-O, CTRL-I,
-	'{A-Z0-9}, or `{A-Z0-9} command takes one to another file.
+	`:next`, `:rewind`, `:last`, `:first`, `:previous`, `:stop`,
+	`:suspend`, `:tag, `:!`, ``:make`, CTRL-] and CTRL-^ command; and when
+	a :buffer, CTRL-O, CTRL-I, '{A-Z0-9}, or `{A-Z0-9} command takes one
+	to another file.
+	A buffer is not written if it becomes hidden, e.g. when 'bufhidden' is
+	set to "hide" and `:next` is used
 	Note that for some commands the 'autowrite' option is not used, see
 	'autowriteall' for that.
 	Some buffers will not be written, specifically when 'buftype' is
@@ -1419,6 +1449,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Also see |win_gettype()|, which returns the type of the window.
 
 	Be careful with changing this option, it can have many side effects!
+	One such effect is that Vim will not check the timestamp of the file,
+	if the file is changed by another program this will not be noticed.
 
 	A "quickfix" buffer is only used for the error list and the location
 	list.  This value is set by the |:cwindow| and |:lwindow| commands and
@@ -1461,6 +1493,15 @@ A jump table for the options with a short description can be found at |Q_op|.
 			case mapping, the current locale is not effective.
 			This probably only matters for Turkish.
 
+						*'cdhome'* *'cdh'*
+'cdhome' 'cdh'		boolean	(default: off)
+			global
+	When on, |:cd|, |:tcd| and |:lcd| without an argument changes the
+	current working directory to the |$HOME| directory like in Unix.
+	When off, those commands just print the current directory name.
+	On Unix this option has no effect.
+	NOTE: This option is reset when 'compatible' is set.
+
 						*'cdpath'* *'cd'* *E344* *E346*
 'cdpath' 'cd'		string	(default: equivalent to $CDPATH or ",,")
 			global
@@ -1802,6 +1843,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	'balloonexpr'	+ ""		text to show in evaluation balloon
 	'breakindent'	+ off		don't indent when wrapping lines
 	'cedit'		- {unchanged}	{set vim default only on resetting 'cp'}
+	'cdhome'	+ off		":cd" don't chdir to home on non-Unix
 	'cindent'	+ off		no C code indentation
 	'compatible'	- {unchanged}	{set vim default only on resetting 'cp'}
 	'copyindent'	+ off		don't copy indent structure
@@ -1917,7 +1959,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	This option specifies a function to be used for Insert mode completion
 	with CTRL-X CTRL-U. |i_CTRL-X_CTRL-U|
 	See |complete-functions| for an explanation of how the function is
-	invoked and what it should return.
+	invoked and what it should return.  The value can be the name of a
+	function, a |lambda| or a |Funcref|. See |option-value-function| for
+	more information.
 	This option cannot be set from a |modeline| or in the |sandbox|, for
 	security reasons.
 
@@ -2410,7 +2454,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	   xchacha20	XChaCha20 Cipher with Poly1305 Message Authentication
 			Code.  Medium strong till strong encryption.
 			Encryption is provided by the libsodium library, it
-			requires Vim to be built with |+sodium|
+			requires Vim to be built with |+sodium|.
 			It adds a seed and a message authentication code (MAC)
 			to the file.  This needs at least a Vim 8.2.3022 to
 			read the encrypted file.
@@ -3610,8 +3654,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	systems without an fsync() implementation, this variable is always
 	off.
 	Also see 'swapsync' for controlling fsync() on swap files.
-	'fsync' also applies to |writefile()|, unless a flag is used to
-	overrule it.
+	'fsync' also applies to |writefile()| (unless a flag is used to
+	overrule it) and when writing undo files (see |undo-persistence|).
 	This option cannot be set from a |modeline| or in the |sandbox|, for
 	security reasons.
 
@@ -3790,6 +3834,18 @@ A jump table for the options with a short description can be found at |Q_op|.
 	screen.  Set it to a negative value to allow windows taller than the
 	screen.
 
+						*'guiligatures'* *'gli'* *E1243*
+'guiligatures' 'gli'	string	(default "")
+			global
+			{only for GTK GUI}
+	List of ASCII characters that, when combined together, can create more
+	complex shapes. Each character must be a printable ASCII character
+	with a value in the 32-127 range.
+	Example: >
+		:set guiligatures=!\"#$%&()*+-./:<=>?@[]^_{\|~
+<	Changing this option updates screen output immediately. Set it to an
+	empty string to disable ligatures.
+
 						*'guioptions'* *'go'*
 'guioptions' 'go'	string	(default "egmrLtT"   (MS-Windows,
 					   "t" is removed in |defaults.vim|),
@@ -4164,8 +4220,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 						*'icon'* *'noicon'*
 'icon'			boolean	(default off, on when title can be restored)
 			global
-			{not available when compiled without the |+title|
-			feature}
 	When on, the icon text of the window will be set to the value of
 	'iconstring' (if it is not empty), or to the name of the file
 	currently being edited.  Only the last part of the name is used.
@@ -4182,8 +4236,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 						*'iconstring'*
 'iconstring'		string	(default "")
 			global
-			{not available when compiled without the |+title|
-			feature}
 	When this option is not empty, it will be used for the icon text of
 	the window.  This happens only when the 'icon' option is on.
 	Only works if the terminal supports setting window icon text
@@ -4210,7 +4262,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 'imactivatefunc' 'imaf'	string (default "")
 			global
 	This option specifies a function that will be called to
-	activate or deactivate the Input Method.
+	activate or deactivate the Input Method.  The value can be the name of
+	a function, a |lambda| or a |Funcref|. See |option-value-function| for
+	more information.
 	It is not used in the MS-Windows GUI version.
 	The expression will be evaluated in the |sandbox| when set from a
 	modeline, see |sandbox-option|.
@@ -4320,6 +4374,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 			global
 	This option specifies a function that is called to obtain the status
 	of Input Method.  It must return a positive number when IME is active.
+	The value can be the name of a function, a |lambda| or a |Funcref|.
+	See |option-value-function| for more information.
 	It is not used in the MS-Windows GUI version.
 
 	Example: >
@@ -4893,9 +4949,10 @@ A jump table for the options with a short description can be found at |Q_op|.
 						*'list'* *'nolist'*
 'list'			boolean	(default off)
 			local to window
-	List mode: Show tabs as CTRL-I is displayed, display $ after end of
-	line.  Useful to see the difference between tabs and spaces and for
-	trailing blanks.  Further changed by the 'listchars' option.
+	List mode: By default show tabs as CTRL-I is displayed, display $
+	after end of line.  Useful to see the difference between tabs and
+	spaces and for trailing blanks.  Further changed by the 'listchars'
+	option.
 
 	The cursor is displayed at the start of the space a Tab character
 	occupies, not at the end as usual in Normal mode.  To get this cursor
@@ -4978,6 +5035,13 @@ A jump table for the options with a short description can be found at |Q_op|.
 	be used when 'encoding' is "utf-8", otherwise only printable
 	characters are allowed.  All characters must be single width.
 
+	Each character can be specified as hex: >
+		set listchars=eol:\\x24
+		set listchars=eol:\\u21b5
+		set listchars=eol:\\U000021b5
+<	Note that a double backslash is used.  The number of hex characters
+	must be exactly 2 for \\x, 4 for \\u and 8 for \\U.
+
 	Examples: >
 	    :set lcs=tab:>-,trail:-
 	    :set lcs=tab:>-,eol:<,nbsp:%
@@ -5537,8 +5601,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	number.
 	When a long, wrapped line doesn't start with the first character, '-'
 	characters are put before the number.
-	See |hl-LineNr|  and |hl-CursorLineNr| for the highlighting used for
-	the number.
+	For highlighting see |hl-LineNr|, and |hl-CursorLineNr|, and the
+	|:sign-define| "numhl" argument.
 						*number_relativenumber*
 	The 'relativenumber' option changes the displayed number to be
 	relative to the cursor.  Together with 'number' there are these
@@ -5578,7 +5642,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	This option specifies a function to be used for Insert mode omni
 	completion with CTRL-X CTRL-O. |i_CTRL-X_CTRL-O|
 	See |complete-functions| for an explanation of how the function is
-	invoked and what it should return.
+	invoked and what it should return.  The value can be the name of a
+	function, a |lambda| or a |Funcref|. See |option-value-function| for
+	more information.
 	This option is usually set by a filetype plugin:
 	|:filetype-plugin-on|
 	This option cannot be set from a |modeline| or in the |sandbox|, for
@@ -5600,7 +5666,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 'operatorfunc' 'opfunc'	string	(default: empty)
 			global
 	This option specifies a function to be called by the |g@| operator.
-	See |:map-operator| for more info and an example.
+	See |:map-operator| for more info and an example.  The value can be
+	the name of a function, a |lambda| or a |Funcref|. See
+	|option-value-function| for more information.
 
 	This option cannot be set from a |modeline| or in the |sandbox|, for
 	security reasons.
@@ -6000,8 +6068,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	customize the information displayed in the quickfix or location window
 	for each entry in the corresponding quickfix or location list.  See
 	|quickfix-window-function| for an explanation of how to write the
-	function and an example. The value can be the name of a function or a
-	lambda.
+	function and an example.  The value can be the name of a function, a
+	|lambda| or a |Funcref|. See |option-value-function| for more
+	information.
 
 	This option cannot be set from a |modeline| or in the |sandbox|, for
 	security reasons.
@@ -7406,13 +7475,13 @@ A jump table for the options with a short description can be found at |Q_op|.
 	      return value of expr contains % items they will get expanded.
 	      The expression can contain the } character, the end of
 	      expression is denoted by %}.
-	      The For example: >
+	      For example: >
 		func! Stl_filename() abort
 		    return "%t"
 		endfunc
 <	        `stl=%{Stl_filename()}`   results in `"%t"`
 	        `stl=%{%Stl_filename()%}` results in `"Name of current file"`
-	} -   End of `{%` expression
+	%} -  End of `{%` expression
 	( -   Start of item group.  Can be used for setting the width and
 	      alignment of a section.  Must be followed by %) somewhere.
 	) -   End of item group.  No width fields allowed.
@@ -7755,7 +7824,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	This option specifies a function to be used to perform tag searches.
 	The function gets the tag pattern and should return a List of matching
 	tags.  See |tag-function| for an explanation of how to write the
-	function and an example.
+	function and an example.  The value can be the name of a function, a
+	|lambda| or a |Funcref|. See |option-value-function| for more
+	information.
 
 						*'taglength'* *'tl'*
 'taglength' 'tl'	number	(default 0)
@@ -7918,6 +7989,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Number of scrollback lines to keep.  When going over this limit the
 	first 10% of the scrollback lines are deleted.  This is just to reduce
 	the memory usage.  See |Terminal-Normal|.
+	Also used as a limit for text sent to the terminal in one write,
+	multiplied by the number of columns times 3 (average number of bytes
+	per cell).
 
 						*'termwinsize'* *'tws'*
 'termwinsize' 'tws'	string	(default "")
@@ -8008,25 +8082,32 @@ A jump table for the options with a short description can be found at |Q_op|.
 'thesaurus' 'tsr'	string	(default "")
 			global or local to buffer |global-local|
 	List of file names, separated by commas, that are used to lookup words
-	for thesaurus completion commands |i_CTRL-X_CTRL-T|.
+	for thesaurus completion commands |i_CTRL-X_CTRL-T|.  See
+	|compl-thesaurus|.
 
-	Each line in the file should contain words with similar meaning,
-	separated by non-keyword characters (white space is preferred).
-	Maximum line length is 510 bytes.
-
-	An English word list was added to this github issue:
-	https://github.com/vim/vim/issues/629#issuecomment-443293282
-	Unpack thesaurus_pkg.zip, put the thesaurus.txt file somewhere, e.g.
-	~/.vim/thesaurus/english.txt, and the 'thesaurus' option to this file
-	name.
+	This option is not used if 'thesaurusfunc' is set, either for the
+	buffer or globally.
 
 	To include a comma in a file name precede it with a backslash.  Spaces
 	after a comma are ignored, otherwise spaces are included in the file
-	name.  See |option-backslash| about using backslashes.
-	The use of |:set+=| and |:set-=| is preferred when adding or removing
-	directories from the list.  This avoids problems when a future version
-	uses another default.
-	Backticks cannot be used in this option for security reasons.
+	name.  See |option-backslash| about using backslashes.  The use of
+	|:set+=| and |:set-=| is preferred when adding or removing directories
+	from the list.  This avoids problems when a future version uses
+	another default.  Backticks cannot be used in this option for security
+	reasons.
+
+						*'thesaurusfunc'* *tsrfu'*
+'thesaurusfunc' 'tsrfu'	string	(default: empty)
+			global or local to buffer |global-local|
+			{not available when compiled without the |+eval|
+			feature}
+	This option specifies a function to be used for thesaurus completion
+	with CTRL-X CTRL-T. |i_CTRL-X_CTRL-T| See |compl-thesaurusfunc|.
+	The value can be the name of a function, a |lambda| or a |Funcref|.
+	See |option-value-function| for more information.
+
+	This option cannot be set from a |modeline| or in the |sandbox|, for
+	security reasons.
 
 			     *'tildeop'* *'top'* *'notildeop'* *'notop'*
 'tildeop' 'top'		boolean	(default off)
@@ -8094,8 +8175,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 						*'title'* *'notitle'*
 'title'			boolean	(default off, on when title can be restored)
 			global
-			{not available when compiled without the |+title|
-			feature}
 	When on, the title of the window will be set to the value of
 	'titlestring' (if it is not empty), or to:
 		filename [+=-] (path) - VIM
@@ -8129,8 +8208,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 								*'titlelen'*
 'titlelen'		number	(default 85)
 			global
-			{not available when compiled without the |+title|
-			feature}
 	Gives the percentage of 'columns' to use for the length of the window
 	title.  When the title is longer, only the end of the path name is
 	shown.  A '<' character before the path name is used to indicate this.
@@ -8144,8 +8221,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 						*'titleold'*
 'titleold'		string	(default "Thanks for flying Vim")
 			global
-			{only available when compiled with the |+title|
-			feature}
 	This option will be used for the window title when exiting Vim if the
 	original title cannot be restored.  Only happens if 'title' is on or
 	'titlestring' is not empty.
@@ -8154,8 +8229,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 						*'titlestring'*
 'titlestring'		string	(default "")
 			global
-			{not available when compiled without the |+title|
-			feature}
 	When this option is not empty, it will be used for the title of the
 	window.  This happens only when the 'title' option is on.
 	Only works if the terminal supports setting window titles (currently
@@ -9133,4 +9206,16 @@ A jump table for the options with a short description can be found at |Q_op|.
 	screen.  When non-zero, characters are sent to the terminal one by
 	one.  For debugging purposes.
 
+					   *'xtermcodes'* *'noxtermcodes'*
+'xtermcodes'		boolean	(default on)
+			global
+	When detecting xterm patchlevel 141 or higher with the termresponse
+	mechanism and this option is set, Vim will request the actual terminal
+	key codes and number of colors from the terminal.  This takes care of
+	various configuration options of the terminal that cannot be obtained
+	from the termlib/terminfo entry, see |xterm-codes|.
+	A side effect may be that t_Co changes and Vim will redraw the
+	display.
+
+
  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/os_haiku.txt

@@ -194,9 +194,8 @@ $VIM/macros/swapmous.vim for an example.		|gui-mouse-mapping|
 
 11. Color names						*haiku-colors*
 
-Vim has a number of color names built-in.  Additional names are read from the
-file $VIMRUNTIME/rgb.txt, if present.  This file is basically the color
-database from X.  Names used from this file are cached for efficiency.
+Vim has a number of color names built-in. Additional names can be defined in
+|v:colornames|. See |:colorscheme| for details.
 
 
 12. GUI Toolbar Images					*haiku-toolbar-images*

runtime/doc/pattern.txt

@@ -932,7 +932,7 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 \%.l    Matches at the cursor line.
 \%<.l   Matches above the cursor line.
 \%>.l   Matches below the cursor line.
-	These three can be used to match specific lines in a buffer.  The "23"
+	These six can be used to match specific lines in a buffer.  The "23"
 	can be any line number.  The first line is 1.
 	WARNING: When inserting or deleting lines Vim does not automatically
 	update the matches.  This means Syntax highlighting quickly becomes
@@ -953,16 +953,15 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 \%.c    Matches at the cursor column.
 \%<.c   Matches before the cursor column.
 \%>.c   Matches after the cursor column.
-	These three can be used to match specific columns in a buffer or
-	string.  The "23" can be any column number.  The first column is 1.
-	Actually, the column is the byte number (thus it's not exactly right
-	for multibyte characters).
+	These six can be used to match specific columns in a buffer or string.
+	The "23" can be any column number.  The first column is 1.  Actually,
+	the column is the byte number (thus it's not exactly right for
+	multibyte characters).
 	WARNING: When inserting or deleting text Vim does not automatically
 	update the matches.  This means Syntax highlighting quickly becomes
 	wrong.  Also when referring to the cursor position (".") and
 	the cursor moves the display isn't updated for this change.  An update
 	is done when using the |CTRL-L| command (the whole screen is updated).
-
 	Example, to highlight the column where the cursor currently is: >
 		:exe '/\%' . col(".") . 'c'
 <	Alternatively use: >
@@ -980,8 +979,8 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 \%.v    Matches at the current virtual column.
 \%<.v   Matches before the current virtual column.
 \%>.v   Matches after the current virtual column.
-	These three can be used to match specific virtual columns in a buffer
-	or string.  When not matching with a buffer in a window, the option
+	These six can be used to match specific virtual columns in a buffer or
+	string.  When not matching with a buffer in a window, the option
 	values of the current window are used (e.g., 'tabstop').
 	The "23" can be any column number.  The first column is 1.
 	Note that some virtual column positions will never match, because they
@@ -1012,7 +1011,7 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 		/.*\%17v
 <	Column 17 is highlighted by 'hlsearch' because there is another match
 	where ".*" matches zero characters.
-<
+
 
 Character classes:
 \i	identifier character (see 'isident' option)	*/\i*

runtime/doc/pi_zip.txt

@@ -1,4 +1,4 @@
-*pi_zip.txt*	For Vim version 8.2.  Last change: 2020 Jan 07
+*pi_zip.txt*	For Vim version 8.2.  Last change: 2021 Nov 08
 
 				+====================+
 				| Zip File Interface |
@@ -102,6 +102,9 @@ Copyright: Copyright (C) 2005-2015 Charles E Campbell	 *zip-copyright*
 
 ==============================================================================
 4. History							*zip-history* {{{1
+   v32 Oct 22, 2021 * to avoid an issue with a vim 8.2 patch, zipfile: has
+   		      been changed to zipfile:// . This often shows up
+		      as zipfile:/// with zipped files that are root-based.
    v29 Apr 02, 2017 * (Klartext) reported that an encrypted zip file could
    		      opened but the swapfile held unencrypted contents.
 		      The solution is to edit the contents of a zip file

runtime/doc/popup.txt

@@ -1,4 +1,4 @@
-*popup.txt*  For Vim version 8.2.  Last change: 2021 Aug 15
+*popup.txt*  For Vim version 8.2.  Last change: 2021 Nov 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -681,6 +681,9 @@ The second argument of |popup_create()| is a dictionary with options:
 			popup does not have a border. As soon as dragging
 			starts and "pos" is "center" it is changed to
 			"topleft".
+	dragall		TRUE to allow the popup to be dragged from every
+			position.  Makes it very difficult to select text in
+			the popup.
 	resize		TRUE to allow the popup to be resized with the mouse
 			by grabbing at the bottom right corner.  Has no effect
 			if the popup does not have a border.

runtime/doc/print.txt

@@ -1,4 +1,4 @@
-*print.txt*     For Vim version 8.2.  Last change: 2020 Aug 15
+*print.txt*     For Vim version 8.2.  Last change: 2021 Oct 04
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -717,7 +717,7 @@ There are a couple of points to bear in mind:
 ==============================================================================
 8. Formfeed Characters					*printing-formfeed*
 
-By default Vim does not do any special processing of |formfeed| control
+By default Vim does not do any special processing of formfeed control
 characters.  Setting the 'printoptions' formfeed item will make Vim recognize
 formfeed characters and continue printing the current line at the beginning
 of the first line on a new page.  The use of formfeed characters provides

runtime/doc/quickfix.txt

@@ -1,4 +1,4 @@
-*quickfix.txt*  For Vim version 8.2.  Last change: 2021 May 22
+*quickfix.txt*  For Vim version 8.2.  Last change: 2021 Dec 03
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -856,9 +856,9 @@ lists.  They set one of the existing error lists as the current one.
 						*:chistory* *:chi*
 :[count]chi[story]	Show the list of error lists.  The current list is
 			marked with ">".  The output looks like:
-				  error list 1 of 3; 43 errors ~
-				> error list 2 of 3; 0 errors ~
-				  error list 3 of 3; 15 errors ~
+			  error list 1 of 3; 43 errors   :make  ~
+			> error list 2 of 3; 0 errors    :helpgrep tag  ~
+			  error list 3 of 3; 15 errors   :grep ex_help *.c ~
 
 			When [count] is given, then the count'th quickfix
 			list is made the current list. Example: >

runtime/doc/quickref.txt

@@ -1,4 +1,4 @@
-*quickref.txt*  For Vim version 8.2.  Last change: 2021 Mar 29
+*quickref.txt*  For Vim version 8.2.  Last change: 2021 Dec 21
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -635,6 +635,7 @@ Short explanation of each option:		*option-list*
 'buflisted'	  'bl'	    whether the buffer shows up in the buffer list
 'buftype'	  'bt'	    special type of buffer
 'casemap'	  'cmp'     specifies how case of letters is changed
+'cdhome'	  'cdh'	    change directory to the home directory by ":cd"
 'cdpath'	  'cd'	    list of directories searched with ":cd"
 'cedit'			    key used to open the command-line window
 'charconvert'	  'ccv'     expression for character encoding conversion
@@ -732,6 +733,7 @@ Short explanation of each option:		*option-list*
 'guifontset'	  'gfs'     GUI: Names of multibyte fonts to be used
 'guifontwide'	  'gfw'     list of font names for double-wide characters
 'guiheadroom'	  'ghr'     GUI: pixels room for window decorations
+'guiligatures'	  'gli'	    GTK GUI: ASCII characters that can form shapes
 'guioptions'	  'go'	    GUI: Which components and options are used
 'guipty'		    GUI: try to use a pseudo-tty for ":!" commands
 'guitablabel'	  'gtl'     GUI: custom label for a tab page
@@ -948,6 +950,7 @@ Short explanation of each option:		*option-list*
 'textmode'	  'tx'	    obsolete, use 'fileformat'
 'textwidth'	  'tw'	    maximum width of text that is being inserted
 'thesaurus'	  'tsr'     list of thesaurus files for keyword completion
+'thesaurusfunc'	  'tsrfu'   function to be used for thesaurus completion
 'tildeop'	  'top'     tilde command "~" behaves like an operator
 'timeout'	  'to'	    time out on mappings and key codes
 'timeoutlen'	  'tm'	    time out time in milliseconds
@@ -1007,6 +1010,7 @@ Short explanation of each option:		*option-list*
 'writeany'	  'wa'	    write to file with no need for "!" override
 'writebackup'	  'wb'	    make a backup before overwriting a file
 'writedelay'	  'wd'	    delay this many msec for each char (for debug)
+'xtermcodes'		    request terminal codes from an xterm
 ------------------------------------------------------------------------------
 *Q_ur*		Undo/Redo commands
 

runtime/doc/repeat.txt

@@ -1,4 +1,4 @@
-*repeat.txt*    For Vim version 8.2.  Last change: 2021 Sep 09
+*repeat.txt*    For Vim version 8.2.  Last change: 2021 Nov 24
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -792,6 +792,10 @@ won't be very helpful.
 
 There is a separate command-line history for debug mode.
 
+NOTE: In Vim9 script, if a command is written at the script level and
+continues on the next line, not using the old way with a backslash for line
+continuation, only the first line is printed before the debugging prompt.
+
 The line number for a function line is relative to the start of the function.
 If you have trouble figuring out where you are, edit the file that defines
 the function in another Vim, search for the start of the function and do

runtime/doc/sign.txt

@@ -1,4 +1,4 @@
-*sign.txt*      For Vim version 8.2.  Last change: 2021 Mar 07
+*sign.txt*      For Vim version 8.2.  Last change: 2021 Dec 05
 
 
 		  VIM REFERENCE MANUAL    by Gordon Prieur
@@ -53,6 +53,8 @@ The color of the column is set with the SignColumn highlight group
 
 	:highlight SignColumn guibg=darkgrey
 <
+If 'cursorline' is enabled, then the CursorLineSign highlight group is used
+|hl-CursorLineSign|.
 							*sign-identifier*
 Each placed sign is identified by a number called the sign identifier. This
 identifier is used to jump to the sign or to remove the sign. The identifier
@@ -138,6 +140,11 @@ See |sign_define()| for the equivalent Vim script function.
 		Highlighting group used for the whole line the sign is placed
 		in.  Most useful is defining a background color.
 
+	numhl={group}
+		Highlighting group used for the line number on the line where
+		the sign is placed.  Overrides |hl-LineNr|, |hl-LineNrAbove|,
+		|hl-LineNrBelow|, and |hl-CursorLineNr|.
+
 	text={text}						*E239*
 		Define the text that is displayed when there is no icon or the
 		GUI is not being used.  Only printable characters are allowed
@@ -146,6 +153,10 @@ See |sign_define()| for the equivalent Vim script function.
 	texthl={group}
 		Highlighting group used for the text item.
 
+	culhl={group}
+		Highlighting group used for the text item when the cursor is
+		on the same line as the sign and 'cursorline' is enabled.
+
 	Example: >
 		:sign define MySign text=>> texthl=Search linehl=DiffText
 <
@@ -390,9 +401,14 @@ sign_define({list})
 		   icon		full path to the bitmap file for the sign.
 		   linehl	highlight group used for the whole line the
 				sign is placed in.
+		   numhl	highlight group used for the line number where
+				the sign is placed.
 		   text		text that is displayed when there is no icon
 				or the GUI is not being used.
 		   texthl	highlight group used for the text item
+		   culhl	highlight group used for the text item when
+				the cursor is on the same line as the sign and
+				'cursorline' is enabled.
 
 		If the sign named {name} already exists, then the attributes
 		of the sign are updated.
@@ -432,11 +448,18 @@ sign_getdefined([{name}])				*sign_getdefined()*
 		following entries:
 		   icon		full path to the bitmap file of the sign
 		   linehl	highlight group used for the whole line the
-				sign is placed in.
+				sign is placed in; not present if not set
 		   name		name of the sign
+		   numhl	highlight group used for the line number where
+				the sign is placed; not present if not set
 		   text		text that is displayed when there is no icon
 				or the GUI is not being used.
-		   texthl	highlight group used for the text item
+		   texthl	highlight group used for the text item; not
+				present if not set
+		   culhl	highlight group used for the text item when
+				the cursor is on the same line as the sign and
+				'cursorline' is enabled; not present if not
+				set
 
 		Returns an empty List if there are no signs and when {name} is
 		not found.

runtime/doc/syntax.txt

@@ -1,4 +1,4 @@
-*syntax.txt*	For Vim version 8.2.  Last change: 2021 Aug 16
+*syntax.txt*	For Vim version 8.2.  Last change: 2021 Nov 20
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -1081,33 +1081,47 @@ This works immediately.
 
 CLOJURE							*ft-clojure-syntax*
 
-The default syntax groups can be augmented through the
-*g:clojure_syntax_keywords* and *b:clojure_syntax_keywords* variables. The
-value should be a |Dictionary| of syntax group names to a |List| of custom
-identifiers:
+						*g:clojure_syntax_keywords*
+
+Syntax highlighting of public vars in "clojure.core" is provided by default,
+but additional symbols can be highlighted by adding them to the
+|g:clojure_syntax_keywords| variable.  The value should be a |Dictionary| of
+syntax group names, each containing a |List| of identifiers.
 >
 	let g:clojure_syntax_keywords = {
-	    \ 'clojureMacro': ["defproject", "defcustom"],
-	    \ 'clojureFunc': ["string/join", "string/replace"]
+	    \   'clojureMacro': ["defproject", "defcustom"],
+	    \   'clojureFunc': ["string/join", "string/replace"]
 	    \ }
 <
 Refer to the Clojure syntax script for valid syntax group names.
 
-If the |buffer-variable| *b:clojure_syntax_without_core_keywords* is set, only
-language constants and special forms are matched.
+There is also *b:clojure_syntax_keywords* which is a buffer-local variant of
+this variable intended for use by plugin authors to highlight symbols
+dynamically.
 
-Setting *g:clojure_fold* enables folding Clojure code via the syntax engine.
-Any list, vector, or map that extends over more than one line can be folded
-using the standard Vim |fold-commands|.
+By setting the *b:clojure_syntax_without_core_keywords* variable, vars from
+"clojure.core" will not be highlighted by default.  This is useful for
+namespaces that have set `(:refer-clojure :only [])`
 
-Please note that this option does not work with scripts that redefine the
-bracket syntax regions, such as rainbow-parentheses plugins.
 
-This option is off by default.
+							*g:clojure_fold*
+
+Setting |g:clojure_fold| to `1` will enable the folding of Clojure code.  Any
+list, vector or map that extends over more than one line can be folded using
+the standard Vim |fold-commands|.
+
+
+						*g:clojure_discard_macro*
+
+Set this variable to `1` to enable basic highlighting of Clojure's "discard
+reader macro".
 >
-	" Default
-	let g:clojure_fold = 0
+	#_(defn foo [x]
+	    (println x))
 <
+Note that this option will not correctly highlight stacked discard macros
+(e.g. `#_#_`).
+
 
 COBOL						*cobol.vim* *ft-cobol-syntax*
 
@@ -1519,6 +1533,14 @@ gvim display.  Here, statements are colored LightYellow instead of Yellow, and
 conditionals are LightBlue for better distinction.
 
 
+FORTH						*forth.vim* *ft-forth-syntax*
+
+Files matching "*.fs" could be F# or Forth.  If the automatic detection
+doesn't work for you, or you don't edit F# at all, use this in your
+startup vimrc: >
+   :let filetype_fs = "forth"
+
+
 FORTRAN					*fortran.vim* *ft-fortran-syntax*
 
 Default highlighting and dialect ~
@@ -1673,16 +1695,6 @@ as Fvwm2 configuration files, add the following: >
   :au! BufNewFile,BufRead /etc/X11/fvwm2/*  let b:fvwm_version = 2 |
 					 \ set filetype=fvwm
 
-If you'd like Vim to highlight all valid color names, tell it where to
-find the color database (rgb.txt) on your system.  Do this by setting
-"rgb_file" to its location.  Assuming your color database is located
-in /usr/X11/lib/X11/, you should add the line >
-
-	:let rgb_file = "/usr/X11/lib/X11/rgb.txt"
-
-to your .vimrc file.
-
-
 GSP						*gsp.vim* *ft-gsp-syntax*
 
 The default coloring style for GSP pages is defined by |html.vim|, and
@@ -3184,6 +3196,14 @@ buffer by buffer basis.
 For more detailed instructions see |ft_sql.txt|.
 
 
+SQUIRREL				*squirrel.vim* *ft-squirrel-syntax*
+
+Squirrel is a high level imperative, object-oriented programming language,
+designed to be a light-weight scripting language that fits in the size, memory
+bandwidth, and real-time requirements of applications like video games.  Files
+with the following extensions are recognized as squirrel files: .nut.
+
+
 TCSH						*tcsh.vim* *ft-tcsh-syntax*
 
 This covers the shell named "tcsh".  It is a superset of csh.  See |csh.vim|
@@ -4486,7 +4506,7 @@ it marks the "\(\I\i*\)" sub-expression as external; in the end pattern, it
 changes the \z1 back-reference into an external reference referring to the
 first external sub-expression in the start pattern.  External references can
 also be used in skip patterns: >
-  :syn region foo start="start \(\I\i*\)" skip="not end \z1" end="end \z1"
+  :syn region foo start="start \z(\I\i*\)" skip="not end \z1" end="end \z1"
 
 Note that normal and external sub-expressions are completely orthogonal and
 indexed separately; for instance, if the pattern "\z(..\)\(..\)" is applied
@@ -4830,16 +4850,28 @@ in their own color.
 			Doesn't work recursively, thus you can't use
 			":colorscheme" in a color scheme script.
 
-			To customize a color scheme use another name, e.g.
+			You have two options for customizing a color scheme.
+			For changing the appearance of specific colors, you
+			can redefine a color name before loading the scheme.
+			The desert scheme uses the khaki color for the cursor.
+			To use a darker variation of the same color: >
+
+				let v:colornames['khaki'] = '#bdb76b'
+				colorscheme desert
+<
+			For further customization, such as changing
+			|:highlight-link| associations, use another name, e.g.
 			"~/.vim/colors/mine.vim", and use `:runtime` to load
 			the original color scheme: >
 				runtime colors/evening.vim
 				hi Statement ctermfg=Blue guifg=Blue
 
-<			Before the color scheme will be loaded the
-			|ColorSchemePre| autocommand event is triggered.
-			After the color scheme has been loaded the
-			|ColorScheme| autocommand event is triggered.
+<			Before the color scheme will be loaded all default
+			color list scripts (`colors/lists/default.vim`) will
+			be executed and then the |ColorSchemePre| autocommand
+			event is triggered.  After the color scheme has been
+			loaded the |ColorScheme| autocommand event is
+			triggered.
 			For info about writing a color scheme file: >
 				:edit $VIMRUNTIME/colors/README.txt
 
@@ -4849,6 +4881,7 @@ in their own color.
 :hi[ghlight] {group-name}
 			List one highlight group.
 
+						*highlight-clear*
 :hi[ghlight] clear	Reset all highlighting to the defaults.  Removes all
 			highlighting for groups added by the user!
 			Uses the current value of 'background' to decide which
@@ -4862,7 +4895,9 @@ in their own color.
 
 :hi[ghlight] [default] {group-name} {key}={arg} ..
 			Add a highlight group, or change the highlighting for
-			an existing group.
+			an existing group. If a given color name is not
+			recognized, each `colors/lists/default.vim` found on
+			|'runtimepath'| will be loaded.
 			See |highlight-args| for the {key}={arg} arguments.
 			See |:highlight-default| for the optional [default]
 			argument.
@@ -5143,8 +5178,35 @@ guisp={color-name}					*highlight-guisp*
 		"gg"	is the Green value
 		"bb"	is the Blue value
 	All values are hexadecimal, range from "00" to "ff".  Examples: >
-  :highlight Comment guifg=#11f0c3 guibg=#ff00ff
+            :highlight Comment guifg=#11f0c3 guibg=#ff00ff
 <
+	If you are authoring a color scheme and use the same hexademical value
+	repeatedly, you can define a name for it in |v:colornames|. For
+	example: >
+
+	    # provide a default value for this color but allow the user to
+	    # override it.
+	    :call extend(v:colornames, {'alt_turquoise': '#11f0c3'}, 'keep')
+	    :highlight Comment guifg=alt_turquoise guibg=magenta
+<
+	If you are using a color scheme that relies on named colors and you
+	would like to adjust the precise appearance of those colors, you can
+	do so by overriding the values in |v:colornames| prior to loading the
+	scheme: >
+
+	    let v:colornames['alt_turquoise'] = '#22f0d3'
+	    colorscheme alt
+<
+	If you want to develop a color list that can be relied on by others,
+	it is best to prefix your color names. By convention these color lists
+	are placed in the colors/lists directory. You can see an example in
+	'$VIMRUNTIME/colors/lists/csscolors.vim'. This list would be sourced
+	by a color scheme using: >
+
+	    :runtime colors/lists/csscolors.vim
+	    :highlight Comment guifg=css_turquoise
+<
+
 					*highlight-groups* *highlight-default*
 These are the default highlighting groups.  These groups are used by the
 'highlight' option default.  Note that the highlighting depends on the value
@@ -5205,6 +5267,10 @@ LineNrBelow	Line number for when the 'relativenumber'
 							*hl-CursorLineNr*
 CursorLineNr	Like LineNr when 'cursorline' is set and 'cursorlineopt'
 		contains "number" or is "both", for the cursor line.
+							*hl-CursorLineSign*
+CursorLineSign	Like SignColumn when 'cursorline' is set for the cursor line.
+							*hl-CursorLineFold*
+CursorLineFold	Like FoldColumn when 'cursorline' is set for the cursor line.
 							*hl-MatchParen*
 MatchParen	The character under the cursor or just before it, if it
 		is a paired bracket, and its match. |pi_paren.txt|
@@ -5431,7 +5497,7 @@ For Unix you can use the file ~/.vim/after/syntax/syncolor.vim.  Example: >
 	else
 	  highlight comment ctermfg=green guifg=green
 	endif
-
+<
 								*E679*
 Do make sure this syncolor.vim script does not use a "syntax on", set the
 'background' option or uses a "colorscheme" command, because it results in an
@@ -5444,11 +5510,11 @@ depends on the color scheme file.  See |:colorscheme|.
 							*syntax_cmd*
 The "syntax_cmd" variable is set to one of these values when the
 syntax/syncolor.vim files are loaded:
-   "on"		":syntax on" command.  Highlight colors are overruled but
+   "on"		`:syntax on` command.  Highlight colors are overruled but
 		links are kept
-   "enable"	":syntax enable" command.  Only define colors for groups that
-		don't have highlighting yet.  Use ":syntax default".
-   "reset"	":syntax reset" command or loading a color scheme.  Define all
+   "enable"	`:syntax enable` command.  Only define colors for groups that
+		don't have highlighting yet.  Use `:highlight default` .
+   "reset"	`:syntax reset` command or loading a color scheme.  Define all
 		the colors.
    "skip"	Don't define colors.  Used to skip the default settings when a
 		syncolor.vim file earlier in 'runtimepath' has already set

runtime/doc/tags

@@ -118,6 +118,8 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'cc'	options.txt	/*'cc'*
 'ccv'	options.txt	/*'ccv'*
 'cd'	options.txt	/*'cd'*
+'cdh'	options.txt	/*'cdh'*
+'cdhome'	options.txt	/*'cdhome'*
 'cdpath'	options.txt	/*'cdpath'*
 'cedit'	options.txt	/*'cedit'*
 'cf'	options.txt	/*'cf'*
@@ -302,6 +304,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'gfs'	options.txt	/*'gfs'*
 'gfw'	options.txt	/*'gfw'*
 'ghr'	options.txt	/*'ghr'*
+'gli'	options.txt	/*'gli'*
 'go'	options.txt	/*'go'*
 'go-!'	options.txt	/*'go-!'*
 'go-A'	options.txt	/*'go-A'*
@@ -339,6 +342,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'guifontset'	options.txt	/*'guifontset'*
 'guifontwide'	options.txt	/*'guifontwide'*
 'guiheadroom'	options.txt	/*'guiheadroom'*
+'guiligatures'	options.txt	/*'guiligatures'*
 'guioptions'	options.txt	/*'guioptions'*
 'guipty'	options.txt	/*'guipty'*
 'guitablabel'	options.txt	/*'guitablabel'*
@@ -747,6 +751,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'nowriteany'	options.txt	/*'nowriteany'*
 'nowritebackup'	options.txt	/*'nowritebackup'*
 'nows'	options.txt	/*'nows'*
+'noxtermcodes'	options.txt	/*'noxtermcodes'*
 'nrformats'	options.txt	/*'nrformats'*
 'nu'	options.txt	/*'nu'*
 'number'	options.txt	/*'number'*
@@ -1138,6 +1143,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'tgc'	options.txt	/*'tgc'*
 'tgst'	options.txt	/*'tgst'*
 'thesaurus'	options.txt	/*'thesaurus'*
+'thesaurusfunc'	options.txt	/*'thesaurusfunc'*
 'tildeop'	options.txt	/*'tildeop'*
 'timeout'	options.txt	/*'timeout'*
 'timeoutlen'	options.txt	/*'timeoutlen'*
@@ -1257,6 +1263,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'writedelay'	options.txt	/*'writedelay'*
 'ws'	options.txt	/*'ws'*
 'ww'	options.txt	/*'ww'*
+'xtermcodes'	options.txt	/*'xtermcodes'*
 '{	motion.txt	/*'{*
 '}	motion.txt	/*'}*
 (	motion.txt	/*(*
@@ -2077,6 +2084,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :XMLent	insert.txt	/*:XMLent*
 :XMLns	insert.txt	/*:XMLns*
 :[range]	motion.txt	/*:[range]*
+:[vV\x16]	autocmd.txt	/*:[vV\\x16]*
 :\bar	cmdline.txt	/*:\\bar*
 :_!	cmdline.txt	/*:_!*
 :_#	cmdline.txt	/*:_#*
@@ -2303,6 +2311,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :command-completion-custom	map.txt	/*:command-completion-custom*
 :command-completion-customlist	map.txt	/*:command-completion-customlist*
 :command-count	map.txt	/*:command-count*
+:command-keepscript	map.txt	/*:command-keepscript*
 :command-modifiers	map.txt	/*:command-modifiers*
 :command-nargs	map.txt	/*:command-nargs*
 :command-range	map.txt	/*:command-range*
@@ -2749,6 +2758,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :map-<unique>	map.txt	/*:map-<unique>*
 :map-alt-keys	map.txt	/*:map-alt-keys*
 :map-arguments	map.txt	/*:map-arguments*
+:map-buffer	map.txt	/*:map-buffer*
 :map-cmd	map.txt	/*:map-cmd*
 :map-commands	map.txt	/*:map-commands*
 :map-expression	map.txt	/*:map-expression*
@@ -2762,6 +2772,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :map-special-chars	map.txt	/*:map-special-chars*
 :map-special-keys	map.txt	/*:map-special-keys*
 :map-undo	map.txt	/*:map-undo*
+:map-unique	map.txt	/*:map-unique*
 :map-verbose	map.txt	/*:map-verbose*
 :map_l	map.txt	/*:map_l*
 :map_l!	map.txt	/*:map_l!*
@@ -3946,7 +3957,6 @@ E107	eval.txt	/*E107*
 E108	eval.txt	/*E108*
 E109	eval.txt	/*E109*
 E1091	vim9.txt	/*E1091*
-E1092	vim9.txt	/*E1092*
 E1094	vim9.txt	/*E1094*
 E11	cmdline.txt	/*E11*
 E110	eval.txt	/*E110*
@@ -3992,6 +4002,9 @@ E1233	eval.txt	/*E1233*
 E1237	map.txt	/*E1237*
 E1239	eval.txt	/*E1239*
 E124	eval.txt	/*E124*
+E1243	options.txt	/*E1243*
+E1244	message.txt	/*E1244*
+E1245	cmdline.txt	/*E1245*
 E125	eval.txt	/*E125*
 E126	eval.txt	/*E126*
 E127	eval.txt	/*E127*
@@ -4943,6 +4956,7 @@ FileChangedRO	autocmd.txt	/*FileChangedRO*
 FileChangedShell	autocmd.txt	/*FileChangedShell*
 FileChangedShellPost	autocmd.txt	/*FileChangedShellPost*
 FileEncoding	autocmd.txt	/*FileEncoding*
+FileExplorer	autocmd.txt	/*FileExplorer*
 FileReadCmd	autocmd.txt	/*FileReadCmd*
 FileReadPost	autocmd.txt	/*FileReadPost*
 FileReadPre	autocmd.txt	/*FileReadPre*
@@ -5235,6 +5249,7 @@ WORD	motion.txt	/*WORD*
 WWW	intro.txt	/*WWW*
 Win32	os_win32.txt	/*Win32*
 WinBar	gui.txt	/*WinBar*
+WinClosed	autocmd.txt	/*WinClosed*
 WinEnter	autocmd.txt	/*WinEnter*
 WinLeave	autocmd.txt	/*WinLeave*
 WinNew	autocmd.txt	/*WinNew*
@@ -5453,6 +5468,7 @@ arglistid()	eval.txt	/*arglistid()*
 argument-list	editing.txt	/*argument-list*
 argv()	eval.txt	/*argv()*
 argv-variable	eval.txt	/*argv-variable*
+arrow_modifiers	term.txt	/*arrow_modifiers*
 as	motion.txt	/*as*
 asin()	eval.txt	/*asin()*
 asm.vim	syntax.txt	/*asm.vim*
@@ -5898,6 +5914,7 @@ collate-variable	eval.txt	/*collate-variable*
 color-xterm	syntax.txt	/*color-xterm*
 coloring	syntax.txt	/*coloring*
 colortest.vim	syntax.txt	/*colortest.vim*
+command-block	vim9.txt	/*command-block*
 command-line-functions	usr_41.txt	/*command-line-functions*
 command-line-window	cmdline.txt	/*command-line-window*
 command-mode	intro.txt	/*command-mode*
@@ -5929,6 +5946,8 @@ compl-omni-filetypes	insert.txt	/*compl-omni-filetypes*
 compl-spelling	insert.txt	/*compl-spelling*
 compl-stop	insert.txt	/*compl-stop*
 compl-tag	insert.txt	/*compl-tag*
+compl-thesaurus	insert.txt	/*compl-thesaurus*
+compl-thesaurusfunc	insert.txt	/*compl-thesaurusfunc*
 compl-vim	insert.txt	/*compl-vim*
 compl-whole-line	insert.txt	/*compl-whole-line*
 complete()	eval.txt	/*complete()*
@@ -6550,7 +6569,7 @@ format-bullet-list	tips.txt	/*format-bullet-list*
 format-comments	change.txt	/*format-comments*
 format-formatexpr	change.txt	/*format-formatexpr*
 formatting	change.txt	/*formatting*
-formfeed	intro.txt	/*formfeed*
+forth.vim	syntax.txt	/*forth.vim*
 fortran.vim	syntax.txt	/*fortran.vim*
 friendship	intro.txt	/*friendship*
 frombook	usr_01.txt	/*frombook*
@@ -6604,11 +6623,13 @@ ft-erlang-syntax	syntax.txt	/*ft-erlang-syntax*
 ft-euphoria-syntax	syntax.txt	/*ft-euphoria-syntax*
 ft-flexwiki-syntax	syntax.txt	/*ft-flexwiki-syntax*
 ft-form-syntax	syntax.txt	/*ft-form-syntax*
+ft-forth-syntax	syntax.txt	/*ft-forth-syntax*
 ft-fortran-indent	indent.txt	/*ft-fortran-indent*
 ft-fortran-plugin	filetype.txt	/*ft-fortran-plugin*
 ft-fortran-syntax	syntax.txt	/*ft-fortran-syntax*
 ft-fvwm-syntax	syntax.txt	/*ft-fvwm-syntax*
 ft-gitcommit-plugin	filetype.txt	/*ft-gitcommit-plugin*
+ft-gprof-plugin	filetype.txt	/*ft-gprof-plugin*
 ft-groff-syntax	syntax.txt	/*ft-groff-syntax*
 ft-gsp-syntax	syntax.txt	/*ft-gsp-syntax*
 ft-haskell-syntax	syntax.txt	/*ft-haskell-syntax*
@@ -6694,6 +6715,7 @@ ft-sql-omni	insert.txt	/*ft-sql-omni*
 ft-sql-syntax	syntax.txt	/*ft-sql-syntax*
 ft-sqlanywhere-syntax	syntax.txt	/*ft-sqlanywhere-syntax*
 ft-sqlinformix-syntax	syntax.txt	/*ft-sqlinformix-syntax*
+ft-squirrel-syntax	syntax.txt	/*ft-squirrel-syntax*
 ft-syntax-omni	insert.txt	/*ft-syntax-omni*
 ft-tcsh-syntax	syntax.txt	/*ft-tcsh-syntax*
 ft-termcap-syntax	syntax.txt	/*ft-termcap-syntax*
@@ -6783,6 +6805,7 @@ g:ada_with_gnat_project_files	ft_ada.txt	/*g:ada_with_gnat_project_files*
 g:ada_withuse_ordinary	ft_ada.txt	/*g:ada_withuse_ordinary*
 g:clojure_align_multiline_strings	indent.txt	/*g:clojure_align_multiline_strings*
 g:clojure_align_subforms	indent.txt	/*g:clojure_align_subforms*
+g:clojure_discard_macro	syntax.txt	/*g:clojure_discard_macro*
 g:clojure_fold	syntax.txt	/*g:clojure_fold*
 g:clojure_fuzzy_indent	indent.txt	/*g:clojure_fuzzy_indent*
 g:clojure_fuzzy_indent_blacklist	indent.txt	/*g:clojure_fuzzy_indent_blacklist*
@@ -7254,6 +7277,7 @@ hasmapto()	eval.txt	/*hasmapto()*
 hebrew	hebrew.txt	/*hebrew*
 hebrew.txt	hebrew.txt	/*hebrew.txt*
 help	helphelp.txt	/*help*
+help-buffer-options	helphelp.txt	/*help-buffer-options*
 help-context	help.txt	/*help-context*
 help-curwin	tips.txt	/*help-curwin*
 help-summary	usr_02.txt	/*help-summary*
@@ -7262,7 +7286,6 @@ help-translated	helphelp.txt	/*help-translated*
 help-writing	helphelp.txt	/*help-writing*
 help-xterm-window	helphelp.txt	/*help-xterm-window*
 help.txt	help.txt	/*help.txt*
-helpfile_name.txt	helphelp.txt	/*helpfile_name.txt*
 helphelp	helphelp.txt	/*helphelp*
 helphelp.txt	helphelp.txt	/*helphelp.txt*
 hex-editing	tips.txt	/*hex-editing*
@@ -7274,6 +7297,7 @@ hidden-options	options.txt	/*hidden-options*
 hidden-quit	windows.txt	/*hidden-quit*
 highlight-args	syntax.txt	/*highlight-args*
 highlight-changed	version4.txt	/*highlight-changed*
+highlight-clear	syntax.txt	/*highlight-clear*
 highlight-cterm	syntax.txt	/*highlight-cterm*
 highlight-ctermbg	syntax.txt	/*highlight-ctermbg*
 highlight-ctermfg	syntax.txt	/*highlight-ctermfg*
@@ -7309,7 +7333,9 @@ hl-Cursor	syntax.txt	/*hl-Cursor*
 hl-CursorColumn	syntax.txt	/*hl-CursorColumn*
 hl-CursorIM	syntax.txt	/*hl-CursorIM*
 hl-CursorLine	syntax.txt	/*hl-CursorLine*
+hl-CursorLineFold	syntax.txt	/*hl-CursorLineFold*
 hl-CursorLineNr	syntax.txt	/*hl-CursorLineNr*
+hl-CursorLineSign	syntax.txt	/*hl-CursorLineSign*
 hl-DiffAdd	syntax.txt	/*hl-DiffAdd*
 hl-DiffChange	syntax.txt	/*hl-DiffChange*
 hl-DiffDelete	syntax.txt	/*hl-DiffDelete*
@@ -7367,7 +7393,9 @@ hl-debugBreakpoint	terminal.txt	/*hl-debugBreakpoint*
 hl-debugPC	terminal.txt	/*hl-debugPC*
 hlID()	eval.txt	/*hlID()*
 hlexists()	eval.txt	/*hlexists()*
+hlget()	eval.txt	/*hlget()*
 hlsearch-variable	eval.txt	/*hlsearch-variable*
+hlset()	eval.txt	/*hlset()*
 holy-grail	index.txt	/*holy-grail*
 home	intro.txt	/*home*
 home-replace	editing.txt	/*home-replace*
@@ -8407,6 +8435,7 @@ operator-variable	eval.txt	/*operator-variable*
 option-backslash	options.txt	/*option-backslash*
 option-list	quickref.txt	/*option-list*
 option-summary	options.txt	/*option-summary*
+option-value-function	options.txt	/*option-value-function*
 option-window	options.txt	/*option-window*
 option_restore()	todo.txt	/*option_restore()*
 option_save()	todo.txt	/*option_save()*
@@ -8529,6 +8558,7 @@ plugin	usr_05.txt	/*plugin*
 plugin-details	filetype.txt	/*plugin-details*
 plugin-filetype	usr_41.txt	/*plugin-filetype*
 plugin-special	usr_41.txt	/*plugin-special*
+plugin_name.txt	helphelp.txt	/*plugin_name.txt*
 pmbcs-option	print.txt	/*pmbcs-option*
 pmbfn-option	print.txt	/*pmbfn-option*
 popt-option	print.txt	/*popt-option*
@@ -8681,6 +8711,7 @@ python-command	if_pyth.txt	/*python-command*
 python-commands	if_pyth.txt	/*python-commands*
 python-current	if_pyth.txt	/*python-current*
 python-dynamic	if_pyth.txt	/*python-dynamic*
+python-environment	if_pyth.txt	/*python-environment*
 python-error	if_pyth.txt	/*python-error*
 python-eval	if_pyth.txt	/*python-eval*
 python-examples	if_pyth.txt	/*python-examples*
@@ -8927,6 +8958,7 @@ save-file	editing.txt	/*save-file*
 save-settings	starting.txt	/*save-settings*
 scheme.vim	syntax.txt	/*scheme.vim*
 scp	pi_netrw.txt	/*scp*
+scratch-buffer	windows.txt	/*scratch-buffer*
 screenattr()	eval.txt	/*screenattr()*
 screenchar()	eval.txt	/*screenchar()*
 screenchars()	eval.txt	/*screenchars()*
@@ -9054,6 +9086,9 @@ simulated-command	vi_diff.txt	/*simulated-command*
 sin()	eval.txt	/*sin()*
 single-repeat	repeat.txt	/*single-repeat*
 sinh()	eval.txt	/*sinh()*
+sizeofint-variable	eval.txt	/*sizeofint-variable*
+sizeoflong-variable	eval.txt	/*sizeoflong-variable*
+sizeofpointer-variable	eval.txt	/*sizeofpointer-variable*
 skeleton	autocmd.txt	/*skeleton*
 skip_defaults_vim	starting.txt	/*skip_defaults_vim*
 slice	eval.txt	/*slice*
@@ -9218,6 +9253,7 @@ sqlj	ft_sql.txt	/*sqlj*
 sqlserver	ft_sql.txt	/*sqlserver*
 sqlsettype	ft_sql.txt	/*sqlsettype*
 sqrt()	eval.txt	/*sqrt()*
+squirrel.vim	syntax.txt	/*squirrel.vim*
 srand()	eval.txt	/*srand()*
 sscanf	eval.txt	/*sscanf*
 standard-plugin	usr_05.txt	/*standard-plugin*
@@ -9825,6 +9861,7 @@ try-echoerr	eval.txt	/*try-echoerr*
 try-finally	eval.txt	/*try-finally*
 try-nested	eval.txt	/*try-nested*
 try-nesting	eval.txt	/*try-nesting*
+tsrfu'	options.txt	/*tsrfu'*
 tutor	usr_01.txt	/*tutor*
 twice	if_cscop.txt	/*twice*
 two-engines	pattern.txt	/*two-engines*
@@ -9929,6 +9966,7 @@ v:charconvert_to	eval.txt	/*v:charconvert_to*
 v:cmdarg	eval.txt	/*v:cmdarg*
 v:cmdbang	eval.txt	/*v:cmdbang*
 v:collate	eval.txt	/*v:collate*
+v:colornames	eval.txt	/*v:colornames*
 v:completed_item	eval.txt	/*v:completed_item*
 v:count	eval.txt	/*v:count*
 v:count1	eval.txt	/*v:count1*
@@ -9984,6 +10022,9 @@ v:scrollstart	eval.txt	/*v:scrollstart*
 v:searchforward	eval.txt	/*v:searchforward*
 v:servername	eval.txt	/*v:servername*
 v:shell_error	eval.txt	/*v:shell_error*
+v:sizeofint	eval.txt	/*v:sizeofint*
+v:sizeoflong	eval.txt	/*v:sizeoflong*
+v:sizeofpointer	eval.txt	/*v:sizeofpointer*
 v:statusmsg	eval.txt	/*v:statusmsg*
 v:swapchoice	eval.txt	/*v:swapchoice*
 v:swapcommand	eval.txt	/*v:swapcommand*

runtime/doc/term.txt

@@ -1,4 +1,4 @@
-*term.txt*      For Vim version 8.2.  Last change: 2021 Aug 29
+*term.txt*      For Vim version 8.2.  Last change: 2021 Dec 21
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -150,8 +150,10 @@ terminal that tmux is running in): >
         " Enable focus event tracking, see  :help xterm-focus-event
         let &t_fe = "\<Esc>[?1004h"
         let &t_fd = "\<Esc>[?1004l"
+	execute "set <FocusGained>=\<Esc>[I"
+        execute "set <FocusLost>=\<Esc>[O"
 
-        " Enable modified arrow keys, see  :help xterm-modifier-keys
+        " Enable modified arrow keys, see  :help arrow_modifiers
         execute "silent! set <xUp>=\<Esc>[@;*A"
         execute "silent! set <xDown>=\<Esc>[@;*B"
         execute "silent! set <xRight>=\<Esc>[@;*C"
@@ -252,7 +254,19 @@ another code.  That is to avoid that the codes obtained from xterm directly
 Another special value is a termcap entry ending in "@;*X".  This is for cursor
 keys, which either use "CSI X" or "CSI 1 ; modifier X".  Thus the "@"
 stands for either "1" if a modifier follows, or nothing.
-							*xterm-scroll-region*
+							*arrow_modifiers*
+Several terminal emulators (alacritty, gnome, konsole, etc.) send special
+codes for keys with modifiers, but these do not have an entry in the
+termcap/terminfo database.  You can make them work by adding a few lines in
+your vimrc.  For example, to make the Control modifier work with arrow keys
+for the gnome terminal: >
+	if &term =~ 'gnome'
+	   execute "set <xUp>=\<Esc>[@;*A"
+	   execute "set <xDown>=\<Esc>[@;*B"
+	   execute "set <xRight>=\<Esc>[@;*C"
+	   execute "set <xLeft>=\<Esc>[@;*D"
+	endif
+<							*xterm-scroll-region*
 The default termcap entry for xterm on Sun and other platforms does not
 contain the entry for scroll regions.  Add ":cs=\E[%i%d;%dr:" to the xterm
 entry in /etc/termcap and everything should work.
@@ -542,8 +556,15 @@ request the key codes directly from the xterm.  The responses are used to
 adjust the various t_ codes.  This avoids the problem that the xterm can
 produce different codes, depending on the mode it is in (8-bit, VT102,
 VT220, etc.).  The result is that codes like <xF1> are no longer needed.
-Note: This is only done on startup.  If the xterm options are changed after
-Vim has started, the escape sequences may not be recognized anymore.
+
+One of the codes that can change is 't_Co', the number of colors.  This will
+trigger a redraw.  If this is a problem, reset the 'xtermcodes' option as
+early as possible: >
+	set noxtermcodes
+
+Note: Requesting the key codes is only done on startup.  If the xterm options
+are changed after Vim has started, the escape sequences may not be recognized
+anymore.
 
 							*xterm-true-color*
 Vim supports using true colors in the terminal (taken from |highlight-guifg|
@@ -594,6 +615,8 @@ If your terminal does support this but Vim does not recognize the terminal,
 you may have to set the options yourself: >
 	let &t_fe = "\<Esc>[?1004h"
 	let &t_fd = "\<Esc>[?1004l"
+	execute "set <FocusGained>=\<Esc>[I"
+        execute "set <FocusLost>=\<Esc>[O"
 If this causes garbage to show when Vim starts up then it doesn't work.
 
 							*termcap-colors*

runtime/doc/terminal.txt

@@ -1,4 +1,4 @@
-*terminal.txt*	For Vim version 8.2.  Last change: 2021 Aug 15
+*terminal.txt*	For Vim version 8.2.  Last change: 2021 Dec 21
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -168,9 +168,6 @@ terminal window will start with a white or black background.
 To use a different color the Terminal highlight group can be used, for
 example: >
     hi Terminal ctermbg=lightgrey ctermfg=blue guibg=lightgrey guifg=blue
-The highlight needs to be defined before the terminal is created.  Doing it
-later, or setting 'wincolor', will only have effect when the program running
-in the terminal displays text or clears the terminal.
 Instead of Terminal another group can be specified with the "term_highlight"
 option for `term_start()`.
 
@@ -243,7 +240,7 @@ Command syntax ~
 			++shell		Instead of executing {command}
 					directly, use a shell, like with
 					`:!command` 		*E279*
-					{only works on Unix currently}
+					{only works on Unix and MS-Windows}
 			++kill={how}	When trying to close the terminal
 					window kill the job with {how}.  See
 					|term_setkill()| for the values.
@@ -874,7 +871,8 @@ term_start({cmd} [, {options}])			*term_start()*
 		   "term_name"	     name to use for the buffer name, instead
 				     of the command name.
 		   "term_rows"	     vertical size to use for the terminal,
-				     instead of using 'termwinsize'
+				     instead of using 'termwinsize'; valid
+				     range is from zero to 1000
 		   "term_cols"	     horizontal size to use for the terminal,
 				     instead of using 'termwinsize'
 		   "vertical"	     split the window vertically; note that
@@ -1430,6 +1428,8 @@ GDB command						*termdebug-customizing*
 To change the name of the gdb command, set the "g:termdebugger" variable before
 invoking `:Termdebug`: >
 	let g:termdebugger = "mygdb"
+If the command needs an argument use a List: >
+	let g:termdebugger = ['rr', 'replay', '--']
 <							*gdb-version*
 Only debuggers fully compatible with gdb will work.  Vim uses the GDB/MI
 interface.  The "new-ui" command  requires gdb version 7.12 or later.  if you

runtime/doc/testing.txt

@@ -1,4 +1,4 @@
-*testing.txt*	For Vim version 8.2.  Last change: 2021 Aug 15
+*testing.txt*	For Vim version 8.2.  Last change: 2021 Dec 11
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -65,7 +65,8 @@ test_garbagecollect_now()			 *test_garbagecollect_now()*
 		Like garbagecollect(), but executed right away.  This must
 		only be called directly to avoid any structure to exist
 		internally, and |v:testing| must have been set before calling
-		any function.
+		any function.  This will not work when called from a :def
+		function, because variables on the stack will be freed.
 
 
 test_garbagecollect_soon()			 *test_garbagecollect_soon()*
@@ -85,14 +86,14 @@ test_getvalue({name})					*test_getvalue()*
 test_gui_drop_files({list}, {row}, {col}, {mods})
 		Drop one or more files in {list} in the window at {row}, {col}.
 		This function only works when the GUI is running and the
-		|drag-n-drop| feature is present.
-		
+		|drop_file| feature is present.
+
 		The supported values for {mods} are:
 			0x4	Shift
 			0x8	Alt
 			0x10	Ctrl
-		The files are added to the argument list and the first file in
-		{list} is edited in the window.  See |drag-n-drop| for more
+		The files are added to the |argument-list| and the first file
+		in {list} is edited in the window.  See |drag-n-drop| for more
 		information.
 
 						*test_gui_mouse_event()*

runtime/doc/textprop.txt

@@ -1,4 +1,4 @@
-*textprop.txt*  For Vim version 8.2.  Last change: 2021 Aug 16
+*textprop.txt*  For Vim version 8.2.  Last change: 2021 Nov 23
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -230,13 +230,25 @@ prop_find({props} [, {direction}])
 
 
 prop_list({lnum} [, {props}])				*prop_list()*
-		Return a List with all text properties in line {lnum}.
+		Returns a List with all the text properties in line {lnum}.
 
-		When {props} contains a "bufnr" item, use this buffer instead
-		of the current buffer.
+		The following optional items are supported in {props}:
+		   bufnr	use this buffer instead of the current buffer
+		   end_lnum	return text properties in all the lines
+				between {lnum} and {end_lnum} (inclusive).
+				A negative value is used as an offset from the
+				last buffer line; -1 refers to the last buffer
+				line.
+		   types	List of property type names. Return only text
+				properties that match one of the type names.
+		   ids		List of property identifiers. Return only text
+				properties with one of these identifiers.
 
 		The properties are ordered by starting column and priority.
 		Each property is a Dict with these entries:
+		   lnum		starting line number. Present only when
+				returning text properties between {lnum} and
+				{end_lnum}.
 		   col		starting column
 		   length	length in bytes, one more if line break is
 				included
@@ -253,6 +265,30 @@ prop_list({lnum} [, {props}])				*prop_list()*
 		When "end" is zero the property continues in the next line.
 		The line break after this line is included.
 
+		Returns an empty list on error.
+
+		Examples:
+		   " get text properties placed in line 5
+		   echo prop_list(5)
+		   " get text properties placed in line 20 in buffer 4
+		   echo prop_list(20, {'bufnr': 4})
+		   " get all the text properties between line 1 and 20
+		   echo prop_list(1, {'end_lnum': 20})
+		   " get all the text properties of type 'myprop'
+		   echo prop_list(1, {'types': ['myprop'],
+						\ 'end_lnum': -1})
+		   " get all the text properties of type 'prop1' or 'prop2'
+		   echo prop_list(1, {'types': ['prop1', 'prop2'],
+						\ 'end_lnum': -1})
+		   " get all the text properties with ID 8
+		   echo prop_list(1, {'ids': [8], 'end_lnum': line('$')})
+		   " get all the text properties with ID 10 and 20
+		   echo prop_list(1, {'ids': [10, 20], 'end_lnum': -1})
+		   " get text properties with type 'myprop' and ID 100
+		   " in buffer 4.
+		   echo prop_list(1, {'bufnr': 4, 'types': ['myprop'],
+					\ 'ids': [100], 'end_lnum': -1})
+
 		Can also be used as a |method|: >
 			GetLnum()->prop_list()
 <

runtime/doc/tips.txt

@@ -1,4 +1,4 @@
-*tips.txt*      For Vim version 8.2.  Last change: 2020 Dec 29
+*tips.txt*      For Vim version 8.2.  Last change: 2021 Nov 06
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -549,6 +549,7 @@ the current window, try this custom `:HelpCurwin` command:
 	  endif
 	  if !getcompletion(a:subject, 'help')->empty()
 	    execute mods .. ' edit ' .. &helpfile
+	    set buftype=help
 	  endif
 	  return 'help ' .. a:subject
 	endfunction

runtime/doc/todo.txt

@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 8.2.  Last change: 2021 Sep 20
+*todo.txt*      For Vim version 8.2.  Last change: 2021 Dec 24
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -38,14 +38,14 @@ browser use: https://github.com/vim/vim/issues/1234
 							*known-bugs*
 -------------------- Known bugs and current work -----------------------
 
-Flaky test op Windows:
-From test_vim9_script.vim:
-    Found errors in Test_no_unknown_error_after_error():
-    command line..script D:/a/vim/vim/src2/testdir/runtest.vim[486]..function RunTheTest[44]..Test_no_unknown_error_after_error line 22: Expected 'E1012:' but got 'E684: list index out of range: 0': so Xdef
+type of v: vars should be more specific
+    v:completed_item  is dict<string>, not dict<any>
+
+E1135 is used twice
+
+"z=" in German can take a very long time, CTRL-C should interrupt it.
 
 Vim9 - Make everything work:
-- Check TODO items in vim9compile.c and vim9execute.c
-- use CheckLegacyAndVim9Success(lines) in many more places
 - For builtin functions using tv_get_string*() use check_for_string() to be
   more strict about the argument type (not a bool).
     done: balloon_()
@@ -53,8 +53,6 @@ Vim9 - Make everything work:
     map() could check that the return type of the function argument matches
     the type of the list or dict member. (#8092)
     Same for other functions, such as searchpair().
-- Test try/catch and throw better, also nested.
-  Test that return inside try/finally jumps to finally and then returns.
 - Test that a function defined inside a :def function is local to that
   function, g: functions can be defined and script-local functions cannot be
   defined.
@@ -94,6 +92,9 @@ Further Vim9 improvements, possibly after launch:
     has(featureName), len(someString)
 - Implement as part of an expression: ++expr, --expr, expr++, expr--.
 
+Update list of features to vote on:
+- multiple cursors
+- built-in LSP support
 
 Popup windows:
 - Preview popup not properly updated when it overlaps with completion menu.
@@ -136,8 +137,6 @@ Text properties:
   where property fits in.
   Or Should we let the textprop highlight overrule other (e.g. diff) highlight
   if the priority is above a certain value?  (#7392)
-- Popup attached to text property stays visible when text is no longer
-  visible. (#7736)
 - Popup attached to text property stays visible when text is deleted with
   "cc". (#7737)  "C" works OK.  "dd" also files in a buffer with a single
   line.
@@ -199,8 +198,6 @@ Terminal emulator window:
 - GUI: When using ":set go+=!" a system() call causes the hit-enter prompt.
   (#3327)
 - Allow for specifying the directory, with ++cwd={dir}.
-- With a vertical split only one window is updated. (Linwei, 2018 Jun 2,
-  #2977)
 - When pasting should call vterm_keyboard_start_paste(), e.g. when using
   K_MIDDLEMOUSE, calling insert_reg().
 - Users expect parsing the :term argument like a shell does, also support
@@ -219,8 +216,6 @@ Terminal emulator window:
 - When 'encoding' is not utf-8, or the job is using another encoding, setup
   conversions.
 
-Include patch #6290: recognize shell directory change.
-
 When using 'cryptmethod' xchaha20 the undo file is not encrypted.
 Need to handle extra bytes.
 
@@ -230,6 +225,8 @@ Fails in line 64 of Ch_communicate, no exception is thrown.
 Patch for Template string: #4634
 Have another look at the implementation.
 
+Add expanding <script> which works like <sfile> everywhere. #9189
+
 Rename getdigraphlist -> digraph_getlist() etc.
 
 Valgrind reports memory leaks in test_options.
@@ -256,12 +253,18 @@ Idea: when typing ":e /some/dir/" and "dir" does not exist, highlight in red.
 initialization to figure out the default value from 'shell'.  Add a test for
 this.
 
+Patch to add :argdedupe. (Nir Lichtman, #6235)
+
 MS-Windows: did path modifier :p:8 stop working?  #8600
 
 test_arglist func Test_all_not_allowed_from_cmdwin() hangs on MS-Windows.
 
 Mapping with partial match not executed properly in GTK. (Ingo Karkat, #7082)
 
+Information for a specific terminal (e.g. gnome, tmux, konsole, alacritty) is
+spread out.  Make a section with copy/paste examples of script and pointers to
+more information.
+
 Problem that a previous silent ":throw" causes a following try/catch not to
 work. (ZyX, 2013 Sep 28) With examples: (Malcolm Rowe, 2015 Dec 24)
 Also see #8487 for an example.
@@ -272,12 +275,18 @@ Was originally written by Felipe Morales.
 Request to use "." for the cursor column in search pattern \%<.c and \%<.v.
 (#8179)
 
+":filter set termcap" only filters terminal codes, not keys. (#9297)
+
+Remove SPACE_IN_FILENAME ? It is only used for completion.
+
+When 'term' starts with "foot" then default t_TI and t_TE to the values used
+for the builtin xterm termcap.
+
 Adding "10" to 'spellsuggest' causes spell suggestions to become very slow.
 (#4087)  Did patch 8.2.2379 help?
 Also, z= in German on a long word can take a very long time, but CTRL-C to
 interrupt does not work. Where to add ui_breakcheck()?
-
-Remove SPACE_IN_FILENAME ? It is only used for completion.
+New English spell files also have very slow suggestions.
 
 Searching for \%'> does not find anything when using line Visual selection.
 Probably because it's using MAXCOL.  #8238
@@ -412,8 +421,6 @@ Motif: Build on Ubuntu can't enter any text in dialog text fields.
 Running test_gui and test_gui_init with Motif sometimes kills the window
 manager.  Problem with Motif?
 
-Patch to add :argdedupe. (Nir Lichtman, #6235)
-
 When editing a file with ":edit" the output of :swapname is relative, while
 editing it with "vim file" it is absolute. (#355)
 Which one should it be?
@@ -429,6 +436,9 @@ undo result wrong: Masato Nishihata, #4798
 After recovering from a swap file the undofile should not be used, it causes
 corruption.  (#6631)
 
+When the computer crashes while writing the undofile, the contents may be
+lost.  Write to a temp file, fsync and rename. (#8879)
+
 When 'lazyredraw' is set sometimes the title is not updated.
 (Jason Franklin, 2020 Feb 3)  Looks like a race condition.
 
@@ -626,36 +636,31 @@ Window size changes after closing a tab. (#4741)
 
 Problem with colors in terminal window. (Jason Franklin, 2019 May 12)
 
-Lifepillar: Updated/cleaned up color schemes:
-https://github.com/lifepillar/vim8-colorschemes.
-
-Include a few color schemes, based on popularity:
-http://www.vim.org/scripts/script_search_results.php?keywords=&script_type=color+scheme&order_by=rating&direction=descending&search=search
+Color schemes:
+NOTE: modernizing the default colorschemes _AND_ introducing new ones is now
+a project in its own right: https://github.com/vim/colorschemes. Feel free to
+reach out if you want to lend a hand.
+- Lifepillar: Updated/cleaned up color schemes:
+  https://github.com/lifepillar/vim8-colorschemes.
+- Include a few color schemes, based on popularity:
+  - http://www.vim.org/scripts/script_search_results.php?keywords=&script_type=color+scheme&order_by=rating&direction=descending&search=search
 http://vimawesome.com/?q=tag:color-scheme
-Use names that indicate their appearance (Christian Brabandt, 2017 Aug 3)
-- monokai - Xia Crusoe (2017 Aug 4)
-- seoul256 - Christian Brabandt (2017 Aug 3)
-- gruvbox -  Christian Brabandt (2017 Aug 3) (simplified version from
-      Lifepillar, 2018 Jan 22, #2573)
-- janah - Marco Hinz (2017 Aug 4)
-- apprentice - Romain Lafourcade (2017 Aug 6)  remarks about help file #1964
-Suggested by Hiroki Kokubun:
-- [Iceberg](https://github.com/cocopon/iceberg.vim) (my one)
-- [hybrid](https://github.com/w0ng/vim-hybrid)
-Include solarized color scheme?, it does not support termguicolors.
-- Sanitized version of pablo (Lifepillar, 2017 Nov 21)
+- Use names that indicate their appearance (Christian Brabandt, 2017 Aug 3)
+  - monokai - Xia Crusoe (2017 Aug 4)
+  - seoul256 - Christian Brabandt (2017 Aug 3)
+  - gruvbox -  Christian Brabandt (2017 Aug 3) (simplified version from
+        Lifepillar, 2018 Jan 22, #2573)
+  - janah - Marco Hinz (2017 Aug 4)
+  - apprentice - Romain Lafourcade (2017 Aug 6)  remarks about help file #1964
+- Suggested by Hiroki Kokubun:
+  - [Iceberg](https://github.com/cocopon/iceberg.vim) (my one)
+  - [hybrid](https://github.com/w0ng/vim-hybrid)
+- Include solarized color scheme?, it does not support termguicolors.
+  - Sanitized version of pablo (Lifepillar, 2017 Nov 21)
 
 Bug: "vipgw" does not put cursor back where it belongs. (Jason Franklin, 2019
 Mar 5)
 
-Many users don't like 'thesaurus' to match so many words. (#4667, #1611)
-- when the match with the first word is partial, don't add other words on that
-  line.
-- support other file formats, such as comma separated.  Indicate by a prefix
-  to the file in the 'thesaurus' option.
-- 'threglookexp' option: only match with first word in thesaurus file.
-  (Jakson A. Aquino, 2006 Jun 14)
-
 Some composing characters actually add a cell width to the character they are
 on top off, making the whole thing two characters wide. (#4526)
 
@@ -845,9 +850,7 @@ window for the buffer.
 Win32 key codes are messy.  Mike Williams tried to fix that, but now old
 mappings no longer work.  Create a new terminal for the better solution?
 
-Compiler warnings (geeknik, 2017 Oct 26):
-- signed integer overflow in do_sub() (#2249)
-- signed integer overflow in get_address() (#2248)
+Compiler warning (geeknik, 2017 Oct 26):
 - undefined left shift in get_string_tv() (#2250)
 
 Add Native language protocol server (LSP) support. (Yegappan Lakshmanan, 2018
@@ -1467,10 +1470,6 @@ When the CursorMovedI event triggers, and CTRL-X was typed, a script cannot
 restore the mode properly. (Andrew Stewart, 2016 Apr 20)
 Do not trigger the event?
 
-Patch to fix display of listchars on the cursorline. (Nayuri Aohime, 2013)
-Update suggested by Yasuhiro Matsumoto, 2014 Nov 25:
-https://gist.github.com/presuku/d3d6b230b9b6dcfc0477
-
 Patch to make the behavior of "w" more straightforward, but not Vi compatible.
 With a 'cpo' flag.  (Christian Brabandt, 2016 Feb 8)
 
@@ -3898,7 +3897,7 @@ User Friendlier:
     $HOME/_vimrc, etc.) and add "edit vimrc" to the File menu.
 -   Add a way to save local settings and mappings into a new plugin file.
     ":mkplugin <file>"?
--   Add mappings local to a window: ":map <window> ..."?
+-   Add mappings local to a window: ":map <window> ..."  #9339
 9   Add buffer-local menu.  Should offer a choice between removing the menu or
     disabling it.  Be careful that tear-offs don't disappear (keep one empty
     item?).
@@ -4156,6 +4155,9 @@ Printing:
 
 
 Syntax highlighting:
+    Long term goal: faster, better, etc.  Options:
+    - use treesitter, NeoVim uses it
+    - use TextMate, vscode uses it.  #9087
 8   Make ":syn off" use 'runtimepath' instead of $VIMRUNTIME. (Gary Johnson)
     Should do the same for ":syn on" and ":syn manual".
 8   Support "containedin" argument for ":syn include", so that the defined

runtime/doc/usr_06.txt

@@ -1,4 +1,4 @@
-*usr_06.txt*	For Vim version 8.2.  Last change: 2019 Jun 01
+*usr_06.txt*	For Vim version 8.2.  Last change: 2021 Nov 07
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -184,7 +184,30 @@ this command: >
 	:runtime syntax/colortest.vim
 
 You will see text in various color combinations.  You can check which ones are
-readable and look nice.
+readable and look nice. These aren't the only colors available to you though.
+You can specify #rrggbb hex colors and you can define new names for hex
+colors in |v:colornames| like so: >
+
+	let v:colornames['mine_red'] = '#aa0000'
+<
+If you are authoring a color scheme for others to use, it is important
+to define these colors only when they do not exist: >
+
+	call extend(v:colornames, {'mine_red': '#aa0000'}, 'keep')
+
+This allows users of the color scheme to override the precise definition of
+that color prior to loading your color scheme. For example, in a |.vimrc|
+file:
+
+	runtime colors/lists/css_colors.vim
+	let v:colornames['your_red'] = v:colornames['css_red']
+	colorscheme yourscheme
+
+As a color scheme author, you should be able to rely on some color names for
+GUI colors. These are defined in `colors/lists/default.vim`. All such files
+found on the |'runtimepath'| are loaded each time the colorscheme command is
+run. A canonical list is provided by the vim distribution, which should
+include all X11 colors (previously defined in rgb.txt).
 
 ==============================================================================
 *06.4*	With colors or without colors

runtime/doc/usr_20.txt

@@ -1,4 +1,4 @@
-*usr_20.txt*	For Vim version 8.2.  Last change: 2006 Apr 24
+*usr_20.txt*	For Vim version 8.2.  Last change: 2021 Nov 18
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -289,11 +289,11 @@ In chapter 3 we briefly mentioned the history.  The basics are that you can
 use the <Up> key to recall an older command line.  <Down> then takes you back
 to newer commands.
 
-There are actually four histories.  The ones we will mention here are for ":"
+There are actually five histories.  The ones we will mention here are for ":"
 commands and for "/" and "?" search commands.  The "/" and "?" commands share
-the same history, because they are both search commands.  The two other
-histories are for expressions and input lines for the input() function.
-|cmdline-history|
+the same history, because they are both search commands.  The three other
+histories are for expressions, debug mode commands and input lines for the
+input() function.  |cmdline-history|
 
 Suppose you have done a ":set" command, typed ten more colon commands and then
 want to repeat that ":set" command again.  You could press ":" and then ten

runtime/doc/usr_41.txt

@@ -925,6 +925,8 @@ Syntax and highlighting:	  *syntax-functions* *highlighting-functions*
 	getmatches()		get all matches defined by |matchadd()| and
 				the |:match| commands
 	hlexists()		check if a highlight group exists
+	hlget()			get highlight group attributes
+	hlset()			set highlight group attributes
 	hlID()			get ID of a highlight group
 	synID()			get syntax ID at a specific position
 	synIDattr()		get a specific attribute of a syntax ID

runtime/doc/various.txt

@@ -1,4 +1,4 @@
-*various.txt*   For Vim version 8.2.  Last change: 2021 Sep 06
+*various.txt*   For Vim version 8.2.  Last change: 2021 Dec 20
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -172,7 +172,7 @@ g8			Print the hex values of the bytes used in the
 
 							*:z!*
 :[range]z![+-^.=][count]
-			Like ":z:", but when [count] is not specified, it
+			Like ":z", but when [count] is not specified, it
 			defaults to the Vim window height minus one.
 
 :[range]z[!]#[+-^.=][count]				*:z#*
@@ -369,7 +369,7 @@ N  *+digraphs*		|digraphs| *E196*
    *+dnd*		Support for DnD into the "~ register |quote_~|.
 B  *+emacs_tags*	|emacs-tags| files
 N  *+eval*		expression evaluation |eval.txt|
-N  *+ex_extra*		always on now, used to be for Vim's extra Ex commands
+T  *+ex_extra*		always on now, used to be for Vim's extra Ex commands
 N  *+extra_search*	|'hlsearch'| and |'incsearch'| options.
 -  *+farsi*		Removed: |farsi| language
 N  *+file_in_path*	|gf|, |CTRL-W_f| and |<cfile>|
@@ -391,7 +391,7 @@ m  *+hangul_input*	Hangul input support |hangul|
 T  *+insert_expand*	|insert_expand| Insert mode completion
 m  *+ipv6*		Support for IPv6 networking |channel|
 m  *+job*		starting and stopping jobs |job|
-S  *+jumplist*		|jumplist|
+T  *+jumplist*		|jumplist|; Always enabled since 8.2.3795
 B  *+keymap*		|'keymap'|
 N  *+lambda*		|lambda| and |closure|
 B  *+langmap*		|'langmap'|
@@ -423,7 +423,7 @@ N  *+multi_lang*	non-English language support |multi-lang|
 m  *+mzscheme*		Mzscheme interface |mzscheme|
 m  *+mzscheme/dyn*	Mzscheme interface |mzscheme-dynamic| |/dyn|
 m  *+netbeans_intg*	|netbeans|
-   *+num64*		64-bit Number support |Number|
+T  *+num64*		64-bit Number support |Number|
    			Always enabled since 8.2.0271, use v:numbersize to
 			check the actual size of a Number.
 m  *+ole*		Win32 GUI only: |ole-interface|
@@ -471,15 +471,15 @@ N  *+textobjects*	|text-objects| selection
 N  *+textprop*		|text-properties|
    *+tgetent*		non-Unix only: able to use external termcap
 N  *+timers*		the |timer_start()| function
-N  *+title*		Setting the window 'title' and 'icon'
+T  *+title*		Setting the window 'title' and 'icon'; Always enabled
 N  *+toolbar*		|gui-toolbar|
 T  *+user_commands*	User-defined commands. |user-commands|
 			Always enabled since 8.1.1210.
 B  *+vartabs*		Variable-width tabstops. |'vartabstop'|
 N  *+viminfo*		|'viminfo'|
-   *+vertsplit*		Vertically split windows |:vsplit|; Always enabled
+T  *+vertsplit*		Vertically split windows |:vsplit|; Always enabled
 			since 8.0.1118.
-N  *+virtualedit*	|'virtualedit'| Always enabled since 8.1.826.
+T  *+virtualedit*	|'virtualedit'| Always enabled since 8.1.826.
 T  *+visual*		Visual mode |Visual-mode| Always enabled since 7.4.200.
 T  *+visualextra*	extra Visual mode commands |blockwise-operators|
 T  *+vreplace*		|gR| and |gr|
@@ -549,14 +549,17 @@ N  *+X11*		Unix only: can restore window title |X11|
 			name can be omitted.
 :redi[r] @">>		Append messages to the unnamed register.
 
-:redi[r] => {var}	Redirect messages to a variable.  If the variable
-			doesn't exist, then it is created.  If the variable
-			exists, then it is initialized to an empty string.
+:redi[r] => {var}	Redirect messages to a variable.
+			In legacy script: If the variable doesn't exist, then
+			it is created.  If the variable exists, then it is
+			initialized to an empty string.  After the redirection
+			starts, if the variable is removed or locked or the
+			variable type is changed, then further command output
+			messages will cause errors.
+			In Vim9 script: the variable must have been declared
+			as a string.
 			The variable will remain empty until redirection ends.
-			Only string variables can be used.  After the
-			redirection starts, if the variable is removed or
-			locked or the variable type is changed, then further
-			command output messages will cause errors.
+			Only string variables can be used.
 			To get the output of one command the |execute()|
 			function can be used instead of redirection.
 
@@ -598,7 +601,7 @@ N  *+X11*		Unix only: can restore window title |X11|
 			   |:oldfiles|   - filter by file name
 			   |:registers|  - filter by register contents
 					   (does not work multi-line)
-			   |:set|        - filter by variable name
+			   |:set|        - filter by option name
 
 			Only normal messages are filtered, error messages are
 			not.

runtime/doc/vim9.txt

@@ -1,4 +1,4 @@
-*vim9.txt*	For Vim version 8.2.  Last change: 2021 Sep 13
+*vim9.txt*	For Vim version 8.2.  Last change: 2021 Dec 22
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -103,7 +103,7 @@ script and `:def` functions; details are below:
 	writefile(['done'], 'file.txt')
 - You cannot use `:xit`, `:t`, `:k`, `:append`, `:change`, `:insert`, `:open`,
   and `:s` or `:d` with only flags.
-  or curly-braces names.
+- You cannot use curly-braces names.
 - A range before a command must be prefixed with a colon: >
 	:%s/this/that
 - Executing a register with "@r" does not work, you can prepend a colon or use
@@ -169,8 +169,8 @@ created yet.  In this case you can call `execute()` to invoke it at runtime. >
 
 `:def` has no options like `:function` does: "range", "abort", "dict" or
 "closure".  A `:def` function always aborts on an error (unless `:silent!` was
-used for the command or inside a `:try` block), does not get a range passed
-cannot be a "dict" function, and can always be a closure.
+used for the command or the error was caught a `:try` block), does not get a
+range passed cannot be a "dict" function, and can always be a closure.
 						*vim9-no-dict-function*
 Later classes will be added, which replaces the "dict function" mechanism.
 For now you will need to pass the dictionary explicitly: >
@@ -206,7 +206,7 @@ When a function argument is optional (it has a default value) passing `v:none`
 as the argument results in using the default value.  This is useful when you
 want to specify a value for an argument that comes after an argument that
 should use its default value.  Example: >
-	def MyFunc(one = 'one', last = 'last)
+	def MyFunc(one = 'one', last = 'last')
 	  ...
 	enddef
 	MyFunc(v:none, 'LAST')  # first argument uses default value 'one'
@@ -234,9 +234,10 @@ the "name#" prefix is sufficient. >
 	def scriptname#function()   # autoload
 
 When using `:function` or `:def` to specify a nested function inside a `:def`
-function, this nested function is local to the code block it is defined in.
-In a `:def` function it is not possible to define a script-local function.  It
-is possible to define a global function by using the "g:" prefix.
+function and no namespace was given, this nested function is local to the code
+block it is defined in.  In a `:def` function it is not possible to define a
+script-local function.  It is possible to define a global function by using
+the "g:" prefix.
 
 When referring to a function and no "s:" or "g:" prefix is used, Vim will
 search for the function:
@@ -420,12 +421,11 @@ similar to how a function argument can be ignored: >
 To ignore any remaining items: >
 	[a, b; _] = longList
 
-<							*E1092*
 Declaring more than one variable at a time, using the unpack notation, is
-currently not supported: >
-	var [v1, v2] = GetValues()  # Error!
-That is because the type needs to be inferred from the list item type, which
-isn't that easy.
+possible.  Each variable can have a type or infer it from the value: >
+	var [v1: number, v2] = GetValues()
+Use this only when there is a list with values, declaring one variable per
+line is much easier to read and change later.
 
 
 Constants ~
@@ -509,7 +509,7 @@ The function must already have been defined. >
 
 When using `function()` the resulting type is "func", a function with any
 number of arguments and any return type (including void).  The function can be
-defined later.
+defined later if the argument is in quotes.
 
 
 Lambda using => instead of -> ~
@@ -560,7 +560,6 @@ This can be useful for a timer, for example: >
 		 echom 'Handler called ' .. count
 	     }, {repeat: 3})
 
-
 The ending "}" must be at the start of a line.  It can be followed by other
 characters, e.g.: >
 	var d = mapnew(dict, (k, v): string => {
@@ -568,6 +567,24 @@ characters, e.g.: >
 	   })
 No command can follow the "{", only a comment can be used there.
 
+							*command-block*
+The block can also be used for defining a user command.  Inside the block Vim9
+syntax will be used.
+
+If the statements include a dictionary, its closing bracket must not be
+written at the start of a line.  Otherwise, it would be parsed as the end of
+the block.  This does not work: >
+	command NewCommand {
+	     g:mydict = {
+	       'key': 'value',
+	       }  # ERROR: will be recognized as the end of the block
+	   }
+Put the '}' after the last item to avoid this: >
+	command NewCommand {
+	     g:mydict = {
+	       'key': 'value' }
+	   }
+
 Rationale: The "}" cannot be after a command because it would require parsing
 the commands to find it.  For consistency with that no command can follow the
 "{".  Unfortunately this means using "() => {  command  }" does not work, line
@@ -631,7 +648,7 @@ at the start of the line indicates line continuation: >
 		|   echo 'match'
 		| endif
 
-Note that this means that in heredoc the first line cannot be a bar: >
+Note that this means that in heredoc the first line cannot start with a bar: >
 	var lines =<< trim END
 	   | this doesn't work
 	END
@@ -639,7 +656,7 @@ Either use an empty line at the start or do not use heredoc.  Or temporarily
 add the "C" flag to 'cpoptions': >
 	set cpo+=C
 	var lines =<< trim END
-	   | this doesn't work
+	   | this works
 	END
 	set cpo-=C
 If the heredoc is inside a function 'cpoptions' must be set before :def and
@@ -821,6 +838,16 @@ error.  Example: >
 
 For loop ~
 
+The loop variable must not be declared yet: >
+	var i = 1
+	for i in [1, 2, 3]   # Error!
+
+It is possible to use a global variable though: >
+	g:i = 1
+	for g:i in [1, 2, 3]
+	  echo g:i
+	endfor
+
 Legacy Vim script has some tricks to make a for loop over a list handle
 deleting items at the current or previous item.  In Vim9 script it just uses
 the index, if items are deleted then items in the list will be skipped.
@@ -942,9 +969,22 @@ Ex command ranges need to be prefixed with a colon. >
 
 Some Ex commands can be confused with assignments in Vim9 script: >
 	g:name = value    # assignment
-	g:pattern:cmd	  # invalid command - ERROR
 	:g:pattern:cmd	  # :global command
 
+To avoid confusion between a `:global` or `:substitute` command and an
+expression or assignment, a few separators cannot be used when these commands
+are abbreviated to a single character: ':', '-' and '.'. >
+	g:pattern:cmd	  # invalid command - ERROR
+	s:pattern:repl	  # invalid command - ERROR
+	g-pattern-cmd	  # invalid command - ERROR
+	s-pattern-repl	  # invalid command - ERROR
+	g.pattern.cmd	  # invalid command - ERROR
+	s.pattern.repl	  # invalid command - ERROR
+
+Also, there cannot be a space between the command and the separator: >
+	g /pattern/cmd	  # invalid command - ERROR
+	s /pattern/repl	  # invalid command - ERROR
+
 Functions defined with `:def` compile the whole function.  Legacy functions
 can bail out, and the following lines are not parsed: >
 	func Maybe()
@@ -1105,20 +1145,14 @@ The map argument is a string expression, which is evaluated without the
 function scope.  Instead, use a lambda: >
 	def MapList(): list<string>
 	  var list = ['aa', 'bb', 'cc', 'dd']
-	  return range(1, 2)->map(( _, v) => list[v])
+	  return range(1, 2)->map((_, v) => list[v])
 	enddef
 
-The same is true for commands that are not compiled, such as `:global`.
-For these the backtick expansion can be used.  Example: >
+For commands that are not compiled, such as `:edit`, backtick expansion can be
+used and it can use the local scope.  Example: >
 	def Replace()
-	  var newText = 'blah'
-	  g/pattern/s/^/`=newText`/
-	enddef
-
-Or a script variable can be used: >
-	var newText = 'blah'
-	def Replace()
-	  g/pattern/s/^/\=newText/
+	  var fname = 'blah.txt'
+	  edit `=fname`
 	enddef
 
 Closures defined in a loop will share the same context.  For example: >
@@ -1309,16 +1343,16 @@ an error, thus breaking backwards compatibility.  For example:
 - Using a string value when setting a number option.
 - Using a number where a string is expected.   *E1024*
 
-One consequence is that the item type of a list or dict given to map() must
+One consequence is that the item type of a list or dict given to |map()| must
 not change.  This will give an error in Vim9 script: >
-	vim9 echo map([1, 2, 3], (i, v) => 'item ' .. i)
+	echo map([1, 2, 3], (i, v) => 'item ' .. i)
 	E1012: Type mismatch; expected number but got string
-Instead use |mapnew(): >
-	vim9 echo mapnew([1, 2, 3], (i, v) => 'item ' .. i)
+Instead use |mapnew()|: >
+	echo mapnew([1, 2, 3], (i, v) => 'item ' .. i)
 	['item 0', 'item 1', 'item 2']
 
 If the item type was determined to be "any" it can change to a more specific
-type.  E.g. when a list of mixed types gets changed to a list of numbers: >
+type.  E.g. when a list of mixed types gets changed to a list of strings: >
 	var mylist = [1, 2.0, '3']
 	# typename(mylist) == "list<any>"
 	map(mylist, (i, v) => 'item ' .. i)

runtime/doc/visual.txt

@@ -1,4 +1,4 @@
-*visual.txt*    For Vim version 8.2.  Last change: 2021 May 30
+*visual.txt*    For Vim version 8.2.  Last change: 2021 Nov 21
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -370,7 +370,8 @@ same amount of text as the last time:
   last line the same number of characters as in the last line the last time.
 The start of the text is the Cursor position.  If the "$" command was used as
 one of the last commands to extend the highlighted text, the repeating will
-be applied up to the rightmost column of the longest line.
+be applied up to the rightmost column of the longest line.  Any count passed
+to the `.` command is not used.
 
 
 ==============================================================================

runtime/doc/windows.txt

@@ -1,4 +1,4 @@
-*windows.txt*   For Vim version 8.2.  Last change: 2021 Sep 09
+*windows.txt*   For Vim version 8.2.  Last change: 2021 Nov 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1203,6 +1203,8 @@ list of buffers. |unlisted-buffer|
 		the current buffer remains being edited.  See |:buffer-!| for
 		[!].  This will also edit a buffer that is not in the buffer
 		list, without setting the 'buflisted' flag.
+		The notation with single quotes does not work here,
+		`:buf 12'345'` uses 12'345 as a buffer name.
 		Also see |+cmd|.
 
 :[N]b[uffer][!] [+cmd] {bufname}				*{bufname}*
@@ -1358,6 +1360,7 @@ directory	Displays directory contents.  Can be used by a file explorer
 <		The buffer name is the name of the directory and is adjusted
 		when using the |:cd| command.
 
+						*scratch-buffer*
 scratch		Contains text that can be discarded at any time.  It is kept
 		when closing the window, it must be deleted explicitly.
 		Settings: >

runtime/doc/xxd-fr.1

@@ -111,7 +111,7 @@ octets.
 .TP
 .IR \-p " | " \-ps " | " \-postscript " | " \-plain
 Produit une conversion continue dans le style Postscript (postscript continuous
-hexdumd style).
+hexdump style).
 Également connu sous le nom de « conversion brute » (plain hexdump style).
 .TP
 .IR \-r " | " \-revert

runtime/doc/xxd-fr.UTF-8.1

@@ -111,7 +111,7 @@ octets.
 .TP
 .IR \-p " | " \-ps " | " \-postscript " | " \-plain
 Produit une conversion continue dans le style Postscript (postscript continuous
-hexdumd style).
+hexdump style).
 Également connu sous le nom de « conversion brute » (plain hexdump style).
 .TP
 .IR \-r " | " \-revert

runtime/filetype.vim

@@ -1,7 +1,7 @@
 " Vim support file to detect file types
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2021 Sep 21
+" Last Change:	2021 Dec 22
 
 " Listen very carefully, I will say this only once
 if exists("did_load_filetypes")
@@ -123,7 +123,7 @@ au BufNewFile,BufRead *.aml			setf aml
 " APT config file
 au BufNewFile,BufRead apt.conf		       setf aptconf
 au BufNewFile,BufRead */.aptitude/config       setf aptconf
-au BufNewFile,BufRead */etc/apt/apt.conf.d/{[-_[:alnum:]]\+,[-_.[:alnum:]]\+.conf} setf aptconf
+" more generic pattern far down
 
 " Arch Inventory file
 au BufNewFile,BufRead .arch-inventory,=tagging-method	setf arch
@@ -260,7 +260,7 @@ au BufNewFile,BufRead *.lpc,*.ulpc		setf lpc
 au BufNewFile,BufRead calendar			setf calendar
 
 " C#
-au BufNewFile,BufRead *.cs			setf cs
+au BufNewFile,BufRead *.cs,*.csx		setf cs
 
 " CSDL
 au BufNewFile,BufRead *.csdl			setf csdl
@@ -490,6 +490,9 @@ au BufNewFile,BufRead dict.conf,.dictrc		setf dictconf
 " Dictd config
 au BufNewFile,BufRead dictd*.conf		setf dictdconf
 
+" DEP3 formatted patch files
+au BufNewFile,BufRead */debian/patches/*	call dist#ft#Dep3patch()
+
 " Diff files
 au BufNewFile,BufRead *.diff,*.rej		setf diff
 au BufNewFile,BufRead *.patch
@@ -617,6 +620,9 @@ autocmd BufRead,BufNewFile *.fnl		setf fennel
 " Fetchmail RC file
 au BufNewFile,BufRead .fetchmailrc		setf fetchmail
 
+" Fish shell
+au BufNewFile,BufRead *.fish			setf fish
+
 " FlexWiki - disabled, because it has side effects when a .wiki file
 " is not actually FlexWiki
 "au BufNewFile,BufRead *.wiki			setf flexwiki
@@ -629,7 +635,7 @@ au BufNewFile,BufRead auto.master		setf conf
 au BufNewFile,BufRead *.mas,*.master		setf master
 
 " Forth
-au BufNewFile,BufRead *.fs,*.ft,*.fth		setf forth
+au BufNewFile,BufRead *.ft,*.fth		setf forth
 
 " Reva Forth
 au BufNewFile,BufRead *.frt			setf reva
@@ -646,8 +652,14 @@ au BufNewFile,BufRead *.fsl			setf framescript
 " FStab
 au BufNewFile,BufRead fstab,mtab		setf fstab
 
+" F# or Forth
+au BufNewFile,BufRead *.fs			call dist#ft#FTfs()
+
+" F#
+au BufNewFile,BufRead *.fsi,*.fsx		setf fsharp
+
 " GDB command files
-au BufNewFile,BufRead .gdbinit			setf gdb
+au BufNewFile,BufRead .gdbinit,gdbinit		setf gdb
 
 " GDMO
 au BufNewFile,BufRead *.mo,*.gdmo		setf gdmo
@@ -707,6 +719,7 @@ au BufNewFile,BufRead *.gpi			setf gnuplot
 
 " Go (Google)
 au BufNewFile,BufRead *.go			setf go
+au BufNewFile,BufRead Gopkg.lock		setf toml
 
 " GrADS scripts
 au BufNewFile,BufRead *.gs			setf grads
@@ -780,6 +793,10 @@ au BufNewFile,BufRead *.hb			setf hb
 " Httest
 au BufNewFile,BufRead *.htt,*.htb		setf httest
 
+" i3 (and sway)
+au BufNewFile,BufRead */i3/config,*/sway/config		setf i3config
+au BufNewFile,BufRead */.i3/config,*/.sway/config	setf i3config
+
 " Icon
 au BufNewFile,BufRead *.icn			setf icon
 
@@ -1074,7 +1091,9 @@ au BufNewFile,BufRead *.mmp			setf mmp
 
 " Modsim III (or LambdaProlog)
 au BufNewFile,BufRead *.mod
-	\ if getline(1) =~ '\<module\>' |
+	\ if expand("<afile>") =~ '\<go.mod$' |
+	\   setf gomod |
+	\ elseif getline(1) =~ '\<module\>' |
 	\   setf lprolog |
 	\ else |
 	\   setf modsim3 |
@@ -1113,14 +1132,15 @@ au BufNewFile,BufRead *.msql			setf msql
 " Mysql
 au BufNewFile,BufRead *.mysql			setf mysql
 
-" Mutt setup files (must be before catch *.rc)
-au BufNewFile,BufRead */etc/Muttrc.d/*		call s:StarSetf('muttrc')
-
 " Tcl Shell RC file
 au BufNewFile,BufRead tclsh.rc			setf tcl
 
 " M$ Resource files
-au BufNewFile,BufRead *.rc,*.rch		setf rc
+" /etc/Muttrc.d/file.rc is muttrc
+au BufNewFile,BufRead *.rc,*.rch
+	\ if expand("<afile>") !~ "/etc/Muttrc.d/" |
+	\   setf rc |
+	\ endif
 
 " MuPAD source
 au BufRead,BufNewFile *.mu			setf mupad
@@ -1290,7 +1310,7 @@ au BufNewFile,BufRead *.rcp			setf pilrc
 au BufNewFile,BufRead .pinerc,pinerc,.pinercex,pinercex		setf pine
 
 " Pipenv Pipfiles
-au BufNewFile,BufRead Pipfile			setf config
+au BufNewFile,BufRead Pipfile			setf toml
 au BufNewFile,BufRead Pipfile.lock		setf json
 
 " PL/1, PL/I
@@ -1492,6 +1512,9 @@ au BufNewFile,BufRead robots.txt		setf robots
 " Rpcgen
 au BufNewFile,BufRead *.x			setf rpcgen
 
+" MikroTik RouterOS script
+au BufRead,BufNewFile *.rsc			setf routeros
+
 " reStructuredText Documentation Format
 au BufNewFile,BufRead *.rst			setf rst
 
@@ -1524,6 +1547,7 @@ au BufNewFile,BufRead [rR]antfile,*.rant,[rR]akefile,*.rake	setf ruby
 
 " Rust
 au BufNewFile,BufRead *.rs			setf rust
+au BufNewFile,BufRead Cargo.lock,*/.cargo/config,*/.cargo/credentials	setf toml
 
 " S-lang (or shader language, or SmallLisp)
 au BufNewFile,BufRead *.sl			setf slang
@@ -1635,6 +1659,9 @@ au BufNewFile,BufRead .tcshrc,*.tcsh,tcsh.tcshrc,tcsh.login	call dist#ft#SetFile
 " (patterns ending in a start further below)
 au BufNewFile,BufRead .login,.cshrc,csh.cshrc,csh.login,csh.logout,*.csh,.alias  call dist#ft#CSH()
 
+" Zig
+au BufNewFile,BufRead *.zig			setf zig
+
 " Z-Shell script (patterns ending in a star further below)
 au BufNewFile,BufRead .zprofile,*/etc/zprofile,.zfbfmarks  setf zsh
 au BufNewFile,BufRead .zshrc,.zshenv,.zlogin,.zlogout,.zcompdump setf zsh
@@ -1721,6 +1748,10 @@ au BufNewFile,BufRead *.speedup,*.spdata,*.spd	setf spup
 " Slice
 au BufNewFile,BufRead *.ice			setf slice
 
+" Microsoft Visual Studio Solution
+au BufNewFile,BufRead *.sln			setf solution
+au BufNewFile,BufRead *.slnf			setf json
+
 " Spice
 au BufNewFile,BufRead *.sp,*.spice		setf spice
 
@@ -1742,6 +1773,9 @@ au BufNewFile,BufRead *.sqlj			setf sqlj
 " SQR
 au BufNewFile,BufRead *.sqr,*.sqi		setf sqr
 
+" Squirrel
+au BufNewFile,BufRead *.nut			setf squirrel
+
 " OpenSSH configuration
 au BufNewFile,BufRead ssh_config,*/.ssh/config		setf sshconfig
 au BufNewFile,BufRead */etc/ssh/ssh_config.d/*.conf	setf sshconfig
@@ -2008,14 +2042,15 @@ au BufNewFile,BufRead *.ws[fc]			setf wsh
 " XHTML
 au BufNewFile,BufRead *.xhtml,*.xht		setf xhtml
 
-" X Pixmap (dynamically sets colors, use BufEnter to make it work better)
-au BufEnter *.xpm
+" X Pixmap (dynamically sets colors, this used to trigger on BufEnter to make
+" it work better, but that breaks setting 'filetype' manually)
+au BufNewFile,BufRead *.xpm
 	\ if getline(1) =~ "XPM2" |
 	\   setf xpm2 |
 	\ else |
 	\   setf xpm |
 	\ endif
-au BufEnter *.xpm2				setf xpm2
+au BufNewFile,BufRead *.xpm2			setf xpm2
 
 " XFree86 config
 au BufNewFile,BufRead XF86Config
@@ -2050,9 +2085,15 @@ au BufNewFile,BufRead *.xml			call dist#ft#FTxml()
 " XMI (holding UML models) is also XML
 au BufNewFile,BufRead *.xmi			setf xml
 
-" CSPROJ files are Visual Studio.NET's XML-based project config files
+" CSPROJ files are Visual Studio.NET's XML-based C# project config files
 au BufNewFile,BufRead *.csproj,*.csproj.user	setf xml
 
+" FSPROJ files are Visual Studio.NET's XML-based F# project config files
+au BufNewFile,BufRead *.fsproj,*.fsproj.user	setf xml
+
+" VBPROJ files are Visual Studio.NET's XML-based Visual Basic project config files
+au BufNewFile,BufRead *.vbproj,*.vbproj.user	setf xml
+
 " Qt Linguist translation source and Qt User Interface Files are XML
 " However, for .ts Typescript is more common.
 au BufNewFile,BufRead *.ui			setf xml
@@ -2138,6 +2179,12 @@ au BufNewFile,BufRead *
 au StdinReadPost * if !did_filetype() | runtime! scripts.vim | endif
 
 
+" Plain text files, needs to be far down to not override others.  This avoids
+" the "conf" type being used if there is a line starting with '#'.
+" But before patterns matching everything in a directory.
+au BufNewFile,BufRead *.text,README,LICENSE,COPYING,AUTHORS	setf text
+
+
 " Extra checks for when no filetype has been detected now.  Mostly used for
 " patterns that end in "*".  E.g., "zsh*" matches "zsh.vim", but that's a Vim
 " script file.
@@ -2152,6 +2199,9 @@ au BufNewFile,BufRead proftpd.conf*					call s:StarSetf('apachestyle')
 au BufNewFile,BufRead access.conf*,apache.conf*,apache2.conf*,httpd.conf*,srm.conf*	call s:StarSetf('apache')
 au BufNewFile,BufRead */etc/apache2/*.conf*,*/etc/apache2/conf.*/*,*/etc/apache2/mods-*/*,*/etc/apache2/sites-*/*,*/etc/httpd/conf.*/*,*/etc/httpd/mods-*/*,*/etc/httpd/sites-*/*,*/etc/httpd/conf.d/*.conf*		call s:StarSetf('apache')
 
+" APT config file
+au BufNewFile,BufRead */etc/apt/apt.conf.d/{[-_[:alnum:]]\+,[-_.[:alnum:]]\+.conf} call s:StarSetf('aptconf')
+
 " Asterisk config file
 au BufNewFile,BufRead *asterisk/*.conf*		call s:StarSetf('asterisk')
 au BufNewFile,BufRead *asterisk*/*voicemail.conf* call s:StarSetf('asteriskvm')
@@ -2253,6 +2303,9 @@ au BufNewFile,BufRead */etc/modutils/*
 	\|endif
 au BufNewFile,BufRead */etc/modprobe.*		call s:StarSetf('modconf')
 
+" Mutt setup files (must be before catch *.rc)
+au BufNewFile,BufRead */etc/Muttrc.d/*		call s:StarSetf('muttrc')
+
 " Mutt setup file
 au BufNewFile,BufRead .mutt{ng,}rc*,*/.mutt{ng,}/mutt{ng,}rc*	call s:StarSetf('muttrc')
 au BufNewFile,BufRead mutt{ng,}rc*,Mutt{ng,}rc*		call s:StarSetf('muttrc')
@@ -2298,12 +2351,18 @@ au BufNewFile,BufRead .bashrc*,.bash[_-]profile*,.bash[_-]logout*,.bash[_-]alias
 au BufNewFile,BufRead .kshrc* call dist#ft#SetFileTypeSH("ksh")
 au BufNewFile,BufRead .profile* call dist#ft#SetFileTypeSH(getline(1))
 
+" Sudoers
+au BufNewFile,BufRead */etc/sudoers.d/*		call s:StarSetf('sudoers')
+
 " tcsh scripts ending in a star
 au BufNewFile,BufRead .tcshrc*	call dist#ft#SetFileTypeShell("tcsh")
 
 " csh scripts ending in a star
 au BufNewFile,BufRead .login*,.cshrc*  call dist#ft#CSH()
 
+" tmux configuration with arbitrary extension
+au BufNewFile,BufRead {.,}tmux*.conf*		setf tmux
+
 " VHDL
 au BufNewFile,BufRead *.vhdl_[0-9]*		call s:StarSetf('vhdl')
 
@@ -2339,10 +2398,6 @@ au BufNewFile,BufRead .zsh*,.zlog*,.zcompdump*  call s:StarSetf('zsh')
 au BufNewFile,BufRead zsh*,zlog*		call s:StarSetf('zsh')
 
 
-" Plain text files, needs to be far down to not override others.  This avoids
-" the "conf" type being used if there is a line starting with '#'.
-au BufNewFile,BufRead *.text,README		setf text
-
 " Help files match *.txt but should have a last line that is a modeline.
 au BufNewFile,BufRead *.txt
 	\  if getline('$') !~ 'vim:.*ft=help'

runtime/ftplugin/aap.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:	Aap recipe
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2013 Apr 05
+" Last Change:	2021 Nov 14
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -11,8 +11,9 @@ endif
 " Don't load another plugin for this buffer
 let b:did_ftplugin = 1
 
-" Reset 'formatoptions', 'comments' and 'expandtab' to undo this plugin.
-let b:undo_ftplugin = "setl fo< com< et<"
+" Reset 'formatoptions', 'comments', 'commentstring' and 'expandtab' to undo
+" this plugin.
+let b:undo_ftplugin = "setl fo< com< cms< et<"
 
 " Set 'formatoptions' to break comment lines but not other lines,
 " and insert the comment leader when hitting <CR> or using "o".
@@ -20,6 +21,12 @@ setlocal fo-=t fo+=croql
 
 " Set 'comments' to format dashed lists in comments.
 setlocal comments=s:#\ -,m:#\ \ ,e:#,n:#,fb:-
+setlocal commentstring=#\ %s
 
 " Expand tabs to spaces to avoid trouble.
 setlocal expandtab
+
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let b:browsefilter = "Aap Recipe Files (*.aap)\t*.aap\nAll Files (*.*)\t*.*\n"
+  let b:undo_ftplugin ..= " | unlet! b:browsefilter"
+endif

runtime/ftplugin/changelog.vim

@@ -2,7 +2,7 @@
 " Language:             generic Changelog file
 " Maintainer:           Martin Florian <marfl@posteo.de>
 " Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2015-10-25
+" Latest Revision:      2021-10-17
 " Variables:
 "   g:changelog_timeformat (deprecated: use g:changelog_dateformat instead) -
 "       description: the timeformat used in ChangeLog entries.
@@ -55,7 +55,7 @@ if &filetype == 'changelog'
     elseif $EMAIL_ADDRESS != ""
       return $EMAIL_ADDRESS
     endif
-    
+
     let login = s:login()
     return printf('%s <%s@%s>', s:name(login), login, s:hostname())
   endfunction
@@ -223,12 +223,6 @@ if &filetype == 'changelog'
     let &paste = save_paste
   endfunction
 
-  if exists(":NewChangelogEntry") != 2
-    nnoremap <buffer> <silent> <Leader>o :<C-u>call <SID>new_changelog_entry('')<CR>
-    xnoremap <buffer> <silent> <Leader>o :<C-u>call <SID>new_changelog_entry('')<CR>
-    command! -nargs=0 NewChangelogEntry call s:new_changelog_entry('')
-  endif
-
   let b:undo_ftplugin = "setl com< fo< et< ai<"
 
   setlocal comments=
@@ -241,14 +235,26 @@ if &filetype == 'changelog'
     let b:undo_ftplugin .= " tw<"
   endif
 
+  if !exists("no_plugin_maps") && !exists("no_changelog_maps") && exists(":NewChangelogEntry") != 2
+    nnoremap <buffer> <silent> <Leader>o :<C-u>call <SID>new_changelog_entry('')<CR>
+    xnoremap <buffer> <silent> <Leader>o :<C-u>call <SID>new_changelog_entry('')<CR>
+    command! -buffer -nargs=0 NewChangelogEntry call s:new_changelog_entry('')
+    let b:undo_ftplugin .= " | sil! exe 'nunmap <buffer> <Leader>o'" .
+          \                " | sil! exe 'vunmap <buffer> <Leader>o'" .
+          \                " | sil! delc NewChangelogEntry"
+  endif
+
   let &cpo = s:cpo_save
   unlet s:cpo_save
 else
   let s:cpo_save = &cpo
   set cpo&vim
 
-  " Add the Changelog opening mapping
-  nnoremap <silent> <Leader>o :call <SID>open_changelog()<CR>
+  if !exists("no_plugin_maps") && !exists("no_changelog_maps")
+    " Add the Changelog opening mapping
+    nnoremap <silent> <Leader>o :call <SID>open_changelog()<CR>
+    let b:undo_ftplugin .= " | silent! exe 'nunmap <buffer> <Leader>o"
+  endif
 
   function! s:open_changelog()
     let path = expand('%:p:h')

runtime/ftplugin/clojure.vim

@@ -1,11 +1,11 @@
 " Vim filetype plugin file
 " Language:           Clojure
-" Maintainer:         Alex Vear <av@axvr.io>
+" Maintainer:         Alex Vear <alex@vear.uk>
 " Former Maintainers: Sung Pae <self@sungpae.com>
 "                     Meikel Brandmeyer <mb@kotka.de>
 " URL:                https://github.com/clojure-vim/clojure.vim
 " License:            Vim (see :h license)
-" Last Change:        2021-02-13
+" Last Change:        2021-10-26
 
 if exists("b:did_ftplugin")
 	finish
@@ -17,7 +17,7 @@ set cpo&vim
 
 let b:undo_ftplugin = 'setlocal iskeyword< define< formatoptions< comments< commentstring< lispwords<'
 
-setlocal iskeyword+=?,-,*,!,+,/,=,<,>,.,:,$
+setlocal iskeyword+=?,-,*,!,+,/,=,<,>,.,:,$,%,&,\|
 
 " There will be false positives, but this is better than missing the whole set
 " of user-defined def* definitions.
@@ -43,7 +43,7 @@ setlocal commentstring=;\ %s
 " specially and hence are not indented specially.
 "
 " -*- LISPWORDS -*-
-" Generated from https://github.com/clojure-vim/clojure.vim/blob/f8594e7030cdfb0b7990ac92953c77a08a7220f0/clj/src/vim_clojure_static/generate.clj
+" Generated from https://github.com/clojure-vim/clojure.vim/blob/62b215f079ce0f3834fd295c7a7f6bd8cc54bcc3/clj/src/vim_clojure_static/generate.clj
 setlocal lispwords=as->,binding,bound-fn,case,catch,cond->,cond->>,condp,def,definline,definterface,defmacro,defmethod,defmulti,defn,defn-,defonce,defprotocol,defrecord,defstruct,deftest,deftest-,deftype,doseq,dotimes,doto,extend,extend-protocol,extend-type,fn,for,if,if-let,if-not,if-some,let,letfn,locking,loop,ns,proxy,reify,set-test,testing,when,when-first,when-let,when-not,when-some,while,with-bindings,with-in-str,with-local-vars,with-open,with-precision,with-redefs,with-redefs-fn,with-test
 
 " Provide insert mode completions for special forms and clojure.core. As
@@ -64,8 +64,8 @@ if exists('loaded_matchit')
 	let b:undo_ftplugin .= ' | unlet! b:match_words b:match_skip'
 endif
 
-" Win32 can filter files in the browse dialog
-if has("gui_win32") && !exists("b:browsefilter")
+" Filter files in the browse dialog
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
 	let b:browsefilter = "Clojure Source Files (*.clj)\t*.clj\n" .
 	                   \ "ClojureScript Source Files (*.cljs)\t*.cljs\n" .
 	                   \ "Java Source Files (*.java)\t*.java\n" .

runtime/ftplugin/context.vim

@@ -2,7 +2,7 @@
 " Language:           ConTeXt typesetting engine
 " Maintainer:         Nicola Vitacolonna <nvitacolonna@gmail.com>
 " Former Maintainers: Nikolai Weibull <now@bitwi.se>
-" Latest Revision:    2016 Oct 30
+" Latest Revision:    2021 Oct 15
 
 if exists("b:did_ftplugin")
   finish
@@ -17,7 +17,6 @@ if !exists('current_compiler')
 endif
 
 let b:undo_ftplugin = "setl com< cms< def< inc< sua< fo< ofu<"
-      \ . "| unlet! b:match_ignorecase b:match_words b:match_skip"
 
 setlocal comments=b:%D,b:%C,b:%M,:% commentstring=%\ %s formatoptions+=tjcroql2
 if get(b:, 'context_metapost', get(g:, 'context_metapost', 1))
@@ -35,11 +34,12 @@ let &l:include = '^\s*\\\%(input\|component\|product\|project\|environment\)'
 
 setlocal suffixesadd=.tex
 
-if exists("loaded_matchit")
+if exists("loaded_matchit") && !exists("b:match_words")
   let b:match_ignorecase = 0
   let b:match_skip = 'r:\\\@<!\%(\\\\\)*%'
   let b:match_words = '(:),\[:],{:},\\(:\\),\\\[:\\],' .
         \ '\\start\(\a\+\):\\stop\1'
+  let b:undo_ftplugin .= " | unlet! b:match_ignorecase b:match_words b:match_skip"
 endif
 
 let s:context_regex = {
@@ -57,19 +57,28 @@ function! s:move_around(count, what, flags, visual)
   call map(range(2, a:count), 'search(s:context_regex[a:what], a:flags)')
 endfunction
 
-" Move around macros.
-nnoremap <silent><buffer> [[ :<C-U>call <SID>move_around(v:count1, "beginsection", "bW", v:false) <CR>
-vnoremap <silent><buffer> [[ :<C-U>call <SID>move_around(v:count1, "beginsection", "bW", v:true)  <CR>
-nnoremap <silent><buffer> ]] :<C-U>call <SID>move_around(v:count1, "beginsection", "W",  v:false) <CR>
-vnoremap <silent><buffer> ]] :<C-U>call <SID>move_around(v:count1, "beginsection", "W",  v:true)  <CR>
-nnoremap <silent><buffer> [] :<C-U>call <SID>move_around(v:count1, "endsection",   "bW", v:false) <CR>
-vnoremap <silent><buffer> [] :<C-U>call <SID>move_around(v:count1, "endsection",   "bW", v:true)  <CR>
-nnoremap <silent><buffer> ][ :<C-U>call <SID>move_around(v:count1, "endsection",   "W",  v:false) <CR>
-vnoremap <silent><buffer> ][ :<C-U>call <SID>move_around(v:count1, "endsection",   "W",  v:true)  <CR>
-nnoremap <silent><buffer> [{ :<C-U>call <SID>move_around(v:count1, "beginblock",   "bW", v:false) <CR>
-vnoremap <silent><buffer> [{ :<C-U>call <SID>move_around(v:count1, "beginblock",   "bW", v:true)  <CR>
-nnoremap <silent><buffer> ]} :<C-U>call <SID>move_around(v:count1, "endblock",     "W",  v:false) <CR>
-vnoremap <silent><buffer> ]} :<C-U>call <SID>move_around(v:count1, "endblock",     "W",  v:true)  <CR>
+if !exists("no_plugin_maps") && !exists("no_context_maps")
+  " Move around macros.
+  nnoremap <silent><buffer> [[ :<C-U>call <SID>move_around(v:count1, "beginsection", "bW", v:false) <CR>
+  vnoremap <silent><buffer> [[ :<C-U>call <SID>move_around(v:count1, "beginsection", "bW", v:true)  <CR>
+  nnoremap <silent><buffer> ]] :<C-U>call <SID>move_around(v:count1, "beginsection", "W",  v:false) <CR>
+  vnoremap <silent><buffer> ]] :<C-U>call <SID>move_around(v:count1, "beginsection", "W",  v:true)  <CR>
+  nnoremap <silent><buffer> [] :<C-U>call <SID>move_around(v:count1, "endsection",   "bW", v:false) <CR>
+  vnoremap <silent><buffer> [] :<C-U>call <SID>move_around(v:count1, "endsection",   "bW", v:true)  <CR>
+  nnoremap <silent><buffer> ][ :<C-U>call <SID>move_around(v:count1, "endsection",   "W",  v:false) <CR>
+  vnoremap <silent><buffer> ][ :<C-U>call <SID>move_around(v:count1, "endsection",   "W",  v:true)  <CR>
+  nnoremap <silent><buffer> [{ :<C-U>call <SID>move_around(v:count1, "beginblock",   "bW", v:false) <CR>
+  vnoremap <silent><buffer> [{ :<C-U>call <SID>move_around(v:count1, "beginblock",   "bW", v:true)  <CR>
+  nnoremap <silent><buffer> ]} :<C-U>call <SID>move_around(v:count1, "endblock",     "W",  v:false) <CR>
+  vnoremap <silent><buffer> ]} :<C-U>call <SID>move_around(v:count1, "endblock",     "W",  v:true)  <CR>
+
+  let b:undo_ftplugin .= " | sil! exe 'nunmap <buffer> [[' | sil! exe 'vunmap <buffer> [['" .
+	\                " | sil! exe 'nunmap <buffer> ]]' | sil! exe 'vunmap <buffer> ]]'" .
+	\                " | sil! exe 'nunmap <buffer> []' | sil! exe 'vunmap <buffer> []'" .
+	\                " | sil! exe 'nunmap <buffer> ][' | sil! exe 'vunmap <buffer> ]['" .
+	\                " | sil! exe 'nunmap <buffer> [{' | sil! exe 'vunmap <buffer> [{'" .
+	\                " | sil! exe 'nunmap <buffer> ]}' | sil! exe 'vunmap <buffer> ]}'"
+end
 
 " Other useful mappings
 if get(g:, 'context_mappings', 1)
@@ -81,16 +90,22 @@ if get(g:, 'context_mappings', 1)
     call cursor(search(s:tp_regex, 'W') - 1, 1)
   endf
 
-  " Reflow paragraphs with commands like gqtp ("gq TeX paragraph")
-  onoremap <silent><buffer> tp :<c-u>call <sid>tp()<cr>
-  " Select TeX paragraph
-  vnoremap <silent><buffer> tp <esc>:<c-u>call <sid>tp()<cr>
+  if !exists("no_plugin_maps") && !exists("no_context_maps")
+    " Reflow paragraphs with commands like gqtp ("gq TeX paragraph")
+    onoremap <silent><buffer> tp :<c-u>call <sid>tp()<cr>
+    " Select TeX paragraph
+    vnoremap <silent><buffer> tp <esc>:<c-u>call <sid>tp()<cr>
 
-  " $...$ text object
-  onoremap <silent><buffer> i$ :<c-u>normal! T$vt$<cr>
-  onoremap <silent><buffer> a$ :<c-u>normal! F$vf$<cr>
-  vnoremap <buffer> i$ T$ot$
-  vnoremap <buffer> a$ F$of$
+    " $...$ text object
+    onoremap <silent><buffer> i$ :<c-u>normal! T$vt$<cr>
+    onoremap <silent><buffer> a$ :<c-u>normal! F$vf$<cr>
+    vnoremap <buffer> i$ T$ot$
+    vnoremap <buffer> a$ F$of$
+
+    let b:undo_ftplugin .= " | sil! exe 'ounmap <buffer> tp' | sil! exe 'vunmap <buffer> tp'" .
+	  \                " | sil! exe 'ounmap <buffer> i$' | sil! exe 'vunmap <buffer> i$'" .
+	  \                " | sil! exe 'ounmap <buffer> a$' | sil! exe 'vunmap <buffer> a$'"
+    endif
 endif
 
 " Commands for asynchronous typesetting

runtime/ftplugin/csh.vim

@@ -1,21 +1,23 @@
 " Vim filetype plugin file
-" Language:	csh
-" Maintainer:	Dan Sharp <dwsharp at users dot sourceforge dot net>
-" Last Changed: 20 Jan 2009
-" URL:		http://dwsharp.users.sourceforge.net/vim/ftplugin
+" Language:		csh
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Dan Sharp <dwsharp at users dot sourceforge dot net>
+" Contributor:		Johannes Zellner <johannes@zellner.org>
+" Last Change:		2021 Oct 15
 
 if exists("b:did_ftplugin") | finish | endif
 let b:did_ftplugin = 1
 
-" Make sure the continuation lines below do not cause problems in
-" compatibility mode.
 let s:save_cpo = &cpo
 set cpo-=C
 
+setlocal comments=:#
 setlocal commentstring=#%s
 setlocal formatoptions-=t
 setlocal formatoptions+=crql
 
+let b:undo_ftplugin = "setlocal com< cms< fo<"
+
 " Csh:  thanks to Johannes Zellner
 " - Both foreach and end must appear alone on separate lines.
 " - The words else and endif must appear at the beginning of input lines;
@@ -23,26 +25,27 @@ setlocal formatoptions+=crql
 " - Each case label and the default label must appear at the start of a
 "   line.
 " - while and end must appear alone on their input lines.
-if exists("loaded_matchit")
-    let b:match_words =
-      \ '^\s*\<if\>.*(.*).*\<then\>:'.
-      \   '^\s*\<else\>\s\+\<if\>.*(.*).*\<then\>:^\s*\<else\>:'.
-      \   '^\s*\<endif\>,'.
-      \ '\%(^\s*\<foreach\>\s\+\S\+\|^s*\<while\>\).*(.*):'.
-      \   '\<break\>:\<continue\>:^\s*\<end\>,'.
-      \ '^\s*\<switch\>.*(.*):^\s*\<case\>\s\+:^\s*\<default\>:^\s*\<endsw\>'
+if exists("loaded_matchit") && !exists("b:match_words")
+  let s:line_start = '\%(^\s*\)\@<='
+  let b:match_words =
+	\ s:line_start .. 'if\s*(.*)\s*then\>:' ..
+	\   s:line_start .. 'else\s\+if\s*(.*)\s*then\>:' .. s:line_start .. 'else\>:' ..
+	\   s:line_start .. 'endif\>,' ..
+	\ s:line_start .. '\%(\<foreach\s\+\h\w*\|while\)\s*(:' ..
+	\   '\<break\>:\<continue\>:' ..
+	\   s:line_start .. 'end\>,' ..
+	\ s:line_start .. 'switch\s*(:' ..
+	\   s:line_start .. 'case\s\+:' .. s:line_start .. 'default\>:\<breaksw\>:' ..
+	\   s:line_start .. 'endsw\>'
+  unlet s:line_start
+  let b:undo_ftplugin ..= " | unlet b:match_words"
 endif
 
-" Change the :browse e filter to primarily show csh-related files.
-if has("gui_win32")
-    let  b:browsefilter="csh Scripts (*.csh)\t*.csh\n" .
-		\	"All Files (*.*)\t*.*\n"
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let  b:browsefilter="csh Scripts (*.csh)\t*.csh\n" ..
+	\	      "All Files (*.*)\t*.*\n"
+  let b:undo_ftplugin ..= " | unlet b:browsefilter"
 endif
 
-" Undo the stuff we changed.
-let b:undo_ftplugin = "setlocal commentstring< formatoptions<" .
-		\     " | unlet! b:match_words b:browsefilter"
-
-" Restore the saved compatibility options.
 let &cpo = s:save_cpo
 unlet s:save_cpo

runtime/ftplugin/diff.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:	Diff
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2020 Jul 18
+" Last Change:	2021 Nov 14
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -9,10 +9,15 @@ if exists("b:did_ftplugin")
 endif
 let b:did_ftplugin = 1
 
-let b:undo_ftplugin = "setl modeline<"
+let b:undo_ftplugin = "setl modeline< commentstring<"
 
 " Don't use modelines in a diff, they apply to the diffed file
 setlocal nomodeline
 
 " If there are comments they start with #
-let &commentstring = "# %s"
+let &l:commentstring = "# %s"
+
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let b:browsefilter = "Diff Files (*.diff)\t*.diff\nPatch Files (*.patch)\t*.h\nAll Files (*.*)\t*.*\n"
+  let b:undo_ftplugin ..= " | unlet! b:browsefilter"
+endif

runtime/ftplugin/i3config.vim

@@ -0,0 +1,13 @@
+" Vim filetype plugin file
+" Language: i3 config file
+" Original Author: Mohamed Boughaba <mohamed dot bgb at gmail dot com>
+" Maintainer: Quentin Hibon
+" Version: 0.4
+" Last Change: 2021 Dec 14
+
+if exists("b:did_ftplugin") | finish | endif
+let b:did_ftplugin = 1
+
+let b:undo_ftplugin = "setlocal cms<"
+
+setlocal commentstring=#\ %s

runtime/ftplugin/indent.vim

@@ -1,7 +1,8 @@
 " Vim filetype plugin file
-" Language:             indent(1) configuration file
-" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2008-07-09
+" Language:		indent(1) configuration file
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
+" Latest Revision:	2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/jsonc.vim

@@ -4,7 +4,7 @@
 " Acknowledgement:  Based off of vim-jsonc maintained by Kevin Locke <kevin@kevinlocke.name>
 "                   https://github.com/kevinoid/vim-jsonc
 " License:          MIT
-" Last Change:      2021-07-01
+" Last Change:      2021 Nov 22
 
 runtime! ftplugin/json.vim
 
@@ -14,14 +14,8 @@ else
   let b:did_ftplugin_jsonc = 1
 endif
 
-" A list of commands that undo buffer local changes made below.
-let s:undo_ftplugin = []
-
 " Set comment (formatting) related options. {{{1
 setlocal commentstring=//%s comments=sO:*\ -,mO:*\ \ ,exO:*/,s1:/*,mb:*,ex:*/,://
-call add(s:undo_ftplugin, 'commentstring< comments<')
 
 " Let Vim know how to disable the plug-in.
-call map(s:undo_ftplugin, "'execute ' . string(v:val)")
-let b:undo_ftplugin = join(s:undo_ftplugin, ' | ')
-unlet s:undo_ftplugin
+let b:undo_ftplugin = 'setlocal commentstring< comments<'

runtime/ftplugin/lua.vim

@@ -1,7 +1,8 @@
 " Vim filetype plugin file.
-" Language:	Lua 4.0+
-" Maintainer:	Max Ischenko <mfi@ukr.net>
-" Last Change:	2012 Mar 07
+" Language:	        Lua
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Max Ischenko <mfi@ukr.net>
+" Last Change:	        2021 Nov 15
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -16,27 +17,30 @@ set cpo&vim
 
 " Set 'formatoptions' to break comment lines but not other lines, and insert
 " the comment leader when hitting <CR> or using "o".
-setlocal fo-=t fo+=croql
+setlocal formatoptions-=t formatoptions+=croql
 
-setlocal com=:--
-setlocal cms=--%s
+setlocal comments=:--
+setlocal commentstring=--%s
 setlocal suffixesadd=.lua
 
+let b:undo_ftplugin = "setlocal fo< com< cms< sua<"
 
-" The following lines enable the macros/matchit.vim plugin for
-" extended matching with the % key.
-if exists("loaded_matchit")
-
+if exists("loaded_matchit") && !exists("b:match_words")
   let b:match_ignorecase = 0
   let b:match_words =
-    \ '\<\%(do\|function\|if\)\>:' .
-    \ '\<\%(return\|else\|elseif\)\>:' .
-    \ '\<end\>,' .
-    \ '\<repeat\>:\<until\>'
+        \ '\<\%(do\|function\|if\)\>:' .
+        \ '\<\%(return\|else\|elseif\)\>:' .
+        \ '\<end\>,' .
+        \ '\<repeat\>:\<until\>,' .
+        \ '\%(--\)\=\[\(=*\)\[:]\1]'
+  let b:undo_ftplugin .= " | unlet! b:match_words b:match_ignorecase"
+endif
 
-endif " exists("loaded_matchit")
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let b:browsefilter = "Lua Source Files (*.lua)\t*.lua\n" .
+	\              "All Files (*.*)\t*.*\n"
+  let b:undo_ftplugin .= " | unlet! b:browsefilter"
+endif
 
 let &cpo = s:cpo_save
 unlet s:cpo_save
-
-let b:undo_ftplugin = "setlocal fo< com< cms< suffixesadd<"

runtime/ftplugin/mail.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:	Mail
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2012 Nov 20
+" Last Change:	2021 Oct 23
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -26,6 +26,14 @@ setlocal fo+=tcql
 " Add n:> to 'comments, in case it was removed elsewhere
 setlocal comments+=n:>
 
+" .eml files are universally formatted with DOS line-endings, per RFC5322.
+" If the file was not DOS the it will be marked as changed, which is probably
+" a good thing.
+if expand('%:e') ==? 'eml'
+  let b:undo_ftplugin ..= " fileformat=" .. &fileformat
+  setlocal fileformat=dos
+endif
+
 " Add mappings, unless the user doesn't want this.
 if !exists("no_plugin_maps") && !exists("no_mail_maps")
   " Quote text by inserting "> "

runtime/ftplugin/man.vim

@@ -2,7 +2,7 @@
 " Language:	man
 " Maintainer:	Jason Franklin <vim@justemail.net>
 " Maintainer:	SungHyun Nam <goweol@gmail.com>
-" Last Change: 	2020 Oct 09
+" Last Change: 	2021 Sep 26
 
 " To make the ":Man" command available before editing a manual page, source
 " this script from your startup vimrc file.

runtime/ftplugin/meson.vim

@@ -12,9 +12,28 @@ set cpo&vim
 
 setlocal commentstring=#\ %s
 setlocal comments=:#
+setlocal formatoptions+=croql formatoptions-=t
 
-setlocal shiftwidth=2
-setlocal softtabstop=2
+let b:undo_ftplugin = "setl com< cms< fo<"
+
+if get(g:, "meson_recommended_style", 1)
+  setlocal expandtab
+  setlocal shiftwidth=2
+  setlocal softtabstop=2
+  let b:undo_ftplugin .= " | setl et< sts< sw<"
+endif
+
+if exists("loaded_matchit") && !exists("b:match_words")
+  let b:match_words = '\<if\>:\<elif\>:\<else\>:\<endif\>,' .
+	\             '\<foreach\>:\<break\>:\<continue\>:\<endforeach\>'
+  let b:undo_ftplugin .= " | unlet! b:match_words"
+endif
+
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let b:browsefilter = "Meson Build Files (meson.build)\tmeson.build\n" .
+	\	       "All Files (*.*)\t*.*\n"
+  let b:undo_ftplugin .= " | unlet! b:browsefilter"
+endif
 
 let &cpo = s:keepcpo
 unlet s:keepcpo

runtime/ftplugin/nginx.vim

@@ -0,0 +1,6 @@
+" Vim filetype plugin
+" Language: nginx.conf
+" Maintainer: Chris Aumann <me@chr4.org>
+" Last Change: Apr 15, 2017
+
+setlocal commentstring=#\ %s

runtime/ftplugin/nsis.vim

@@ -3,7 +3,7 @@
 " Maintainer:		Ken Takata
 " URL:			https://github.com/k-takata/vim-nsis
 " Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
-" Last Change:		2018-01-26
+" Last Change:		2021-10-18
 
 if exists("b:did_ftplugin")
   finish
@@ -15,7 +15,6 @@ set cpo&vim
 let b:did_ftplugin = 1
 
 let b:undo_ftplugin = "setl com< cms< fo< def< inc<"
-      \ " | unlet! b:match_ignorecase b:match_words"
 
 setlocal comments=s1:/*,mb:*,ex:*/,b:#,:; commentstring=;\ %s
 setlocal formatoptions-=t formatoptions+=croql
@@ -37,6 +36,7 @@ if exists("loaded_matchit")
 	\ '\${MementoSection}:\${MementoSectionEnd},' .
 	\ '!if\%(\%(macro\)\?n\?def\)\?\>:!else\>:!endif\>,' .
 	\ '!macro\>:!macroend\>'
+  let b:undo_ftplugin .= " | unlet! b:match_ignorecase b:match_words"
 endif
 
 let &cpo = s:cpo_save

runtime/ftplugin/routeros.vim

@@ -0,0 +1,29 @@
+" Vim filetype plugin file
+" Language:	MikroTik RouterOS Script
+" Maintainer:	zainin <z@wintr.dev>
+" Last Change:	2021 Nov 14
+
+if exists("b:did_ftplugin")
+  finish
+endif
+let b:did_ftplugin = 1
+
+let s:save_cpo = &cpo
+set cpo-=C
+
+setlocal comments=:#
+setlocal commentstring=#\ %s
+setlocal formatoptions-=t formatoptions+=croql
+
+let b:undo_ftplugin = "setlocal com< cms< fo<"
+
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let b:browsefilter = "RouterOS Script Files (*.rsc)\t*.rsc\n" ..
+	\	       "All Files (*.*)\t*.*\n"
+  let b:undo_ftplugin ..= " | unlet! b:browsefilter"
+endif
+
+let &cpo = s:save_cpo
+unlet! s:save_cpo
+
+" vim: nowrap sw=2 sts=2 ts=8 noet:

runtime/ftplugin/solution.vim

@@ -0,0 +1,37 @@
+" Vim filetype plugin file
+" Language:	Microsoft Visual Studio Solution
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2021 Dec 15
+
+if exists("b:did_ftplugin")
+  finish
+endif
+let b:did_ftplugin = 1
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+setlocal comments=:#
+setlocal commentstring=#\ %s
+
+let b:undo_ftplugin = "setl com< cms<"
+
+if exists("loaded_matchit") && !exists("b:match_words")
+  let b:match_words =
+	\ '\<Project\>:\<EndProject\>,' ..
+	\ '\<ProjectSection\>:\<EndProjectSection\>,' ..
+	\ '\<Global\>:\<EndGlobal\>,' ..
+	\ '\<GlobalSection\>:\<EndGlobalSection\>'
+  let b:undo_ftplugin ..= " | unlet! b:match_words"
+endif
+
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let b:browsefilter = "Microsoft Visual Studio Solution Files\t*.sln\n" ..
+	\	       "All Files (*.*)\t*.*\n"
+  let b:undo_ftplugin ..= " | unlet! b:browsefilter"
+endif
+
+let &cpo = s:cpo_save
+unlet s:cpo_save
+
+" vim: nowrap sw=2 sts=2 ts=8 noet:

runtime/ftplugin/tcsh.vim

@@ -1,19 +1,17 @@
 " Vim filetype plugin file
-" Language:	tcsh
-" Maintainer:	Dan Sharp <dwsharp at users dot sourceforge dot net>
-" Last Changed: 20 Jan 2009
-" URL:		http://dwsharp.users.sourceforge.net/vim/ftplugin
+" Language:		tcsh
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Dan Sharp <dwsharp at users dot sourceforge dot net>
+" Last Change:		2021 Oct 15
 
 if exists("b:did_ftplugin") | finish | endif
 
-" Make sure the continuation lines below do not cause problems in
-" compatibility mode.
 let s:save_cpo = &cpo
 set cpo-=C
 
 " Define some defaults in case the included ftplugins don't set them.
 let s:undo_ftplugin = ""
-let s:browsefilter = "csh Files (*.csh)\t*.csh\n" .
+let s:browsefilter = "csh Files (*.csh)\t*.csh\n" ..
 	    \	     "All Files (*.*)\t*.*\n"
 
 runtime! ftplugin/csh.vim ftplugin/csh_*.vim ftplugin/csh/*.vim
@@ -27,14 +25,11 @@ if exists("b:browsefilter")
     let s:browsefilter = b:browsefilter
 endif
 
-" Change the :browse e filter to primarily show tcsh-related files.
-if has("gui_win32")
-    let  b:browsefilter="tcsh Scripts (*.tcsh)\t*.tcsh\n" . s:browsefilter
+if (has("gui_win32") || has("gui_gtk"))
+    let  b:browsefilter="tcsh Scripts (*.tcsh)\t*.tcsh\n" .. s:browsefilter
 endif
 
-" Undo the stuff we changed.
-let b:undo_ftplugin = "unlet! b:browsefilter | " . s:undo_ftplugin
+let b:undo_ftplugin = "unlet! b:browsefilter | " .. s:undo_ftplugin
 
-" Restore the saved compatibility options.
 let &cpo = s:save_cpo
 unlet s:save_cpo

runtime/ftplugin/tmux.vim

@@ -9,4 +9,7 @@ if exists("b:did_ftplugin")
 endif
 let b:did_ftplugin = 1
 
+let b:undo_ftplugin = "setlocal comments< commentstring<"
+
+setlocal comments=:#
 setlocal commentstring=#\ %s

runtime/ftplugin/toml.vim

@@ -0,0 +1,23 @@
+" Vim filetype plugin
+" Language:    TOML
+" Homepage:    https://github.com/cespare/vim-toml
+" Maintainer:  Aman Verma
+" Author:      Kevin Ballard <kevin@sb.org>
+" Last Change: Sep 21, 2021
+
+if exists('b:did_ftplugin')
+  finish
+endif
+let b:did_ftplugin = 1
+
+let s:save_cpo = &cpo
+set cpo&vim
+let b:undo_ftplugin = 'setlocal commentstring< comments<'
+
+setlocal commentstring=#\ %s
+setlocal comments=:#
+
+let &cpo = s:save_cpo
+unlet s:save_cpo
+
+" vim: et sw=2 sts=2

runtime/ftplugin/vb.vim

@@ -1,44 +1,70 @@
 " Vim filetype plugin file
-" Language:	VisualBasic (ft=vb)
-" Maintainer:	Johannes Zellner <johannes@zellner.org>
-" Last Change:	Thu, 22 Nov 2001 12:56:14 W. Europe Standard Time
+" Language:		Visual Basic (ft=vb)
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Johannes Zellner <johannes@zellner.org>
+" Last Change:		2021 Nov 17
 
-if exists("b:did_ftplugin") | finish | endif
+if exists("b:did_ftplugin")
+  finish
+endif
 let b:did_ftplugin = 1
 
-setlocal com=sr:'\ -,mb:'\ \ ,el:'\ \ ,:'
+let s:cpo_save = &cpo
+set cpo&vim
+
+setlocal comments=sr:'\ -,mb:'\ \ ,el:'\ \ ,:'
+setlocal commentstring='\ %s
+setlocal formatoptions-=t formatoptions+=croql
+
+let b:undo_ftplugin = "setlocal com< cms< fo<"
 
 " we need this wrapper, as call doesn't allow a count
-fun! <SID>VbSearch(pattern, flags)
+function! s:VbSearch(pattern, flags)
     let cnt = v:count1
     while cnt > 0
 	call search(a:pattern, a:flags)
 	let cnt = cnt - 1
     endwhile
-endfun
+endfunction
 
-let s:cpo_save = &cpo
-set cpo&vim
+if !exists("no_plugin_maps") && !exists("no_vb_maps")
+  nnoremap <buffer> <silent> [[ <Cmd>call <SID>VbSearch('^\s*\%(\%(private\<Bar>public\)\s\+\)\=\%(function\<Bar>sub\)', 'sbW')<CR>
+  vnoremap <buffer> <silent> [[ <Cmd>call <SID>VbSearch('^\s*\%(\%(private\<Bar>public\)\s\+\)\=\%(function\<Bar>sub\)', 'sbW')<CR>
+  nnoremap <buffer> <silent> ]] <Cmd>call <SID>VbSearch('^\s*\%(\%(private\<Bar>public\)\s\+\)\=\%(function\<Bar>sub\)', 'sW')<CR>
+  vnoremap <buffer> <silent> ]] <Cmd>call <SID>VbSearch('^\s*\%(\%(private\<Bar>public\)\s\+\)\=\%(function\<Bar>sub\)', 'sW')<CR>
+  nnoremap <buffer> <silent> [] <Cmd>call <SID>VbSearch('^\s*end\s\+\%(function\<Bar>sub\)', 'sbW')<CR>
+  vnoremap <buffer> <silent> [] <Cmd>call <SID>VbSearch('^\s*end\s\+\%(function\<Bar>sub\)', 'sbW')<CR>
+  nnoremap <buffer> <silent> ][ <Cmd>call <SID>VbSearch('^\s*end\s\+\%(function\<Bar>sub\)', 'sW')<CR>
+  vnoremap <buffer> <silent> ][ <Cmd>call <SID>VbSearch('^\s*end\s\+\%(function\<Bar>sub\)', 'sW')<CR>
+  let b:undo_ftplugin .= " | sil! exe 'nunmap <buffer> [[' | sil! exe 'vunmap <buffer> [['" .
+	\		 " | sil! exe 'nunmap <buffer> ]]' | sil! exe 'vunmap <buffer> ]]'" .
+	\		 " | sil! exe 'nunmap <buffer> []' | sil! exe 'vunmap <buffer> []'" .
+	\		 " | sil! exe 'nunmap <buffer> ][' | sil! exe 'vunmap <buffer> ]['"
+endif
 
-" NOTE the double escaping \\|
-nnoremap <buffer> <silent> [[ :call <SID>VbSearch('^\s*\(\(private\|public\)\s\+\)\=\(function\\|sub\)', 'bW')<cr>
-nnoremap <buffer> <silent> ]] :call <SID>VbSearch('^\s*\(\(private\|public\)\s\+\)\=\(function\\|sub\)', 'W')<cr>
-nnoremap <buffer> <silent> [] :call <SID>VbSearch('^\s*\<end\>\s\+\(function\\|sub\)', 'bW')<cr>
-nnoremap <buffer> <silent> ][ :call <SID>VbSearch('^\s*\<end\>\s\+\(function\\|sub\)', 'W')<cr>
+" TODO: line start anchors are almost certainly overly restrictive - allow
+" after statement separators.  Even in QuickBasic only block IF statements
+" were required to be at the start of a line.
+if exists("loaded_matchit") && !exists("b:match_words")
+  let b:match_ignorecase = 1
+  let b:match_words =
+	\ '\%(^\s*\)\@<=\<if\>.*\<then\>\s*\%($\|''\):\%(^\s*\)\@<=\<else\>:\%(^\s*\)\@<=\<elseif\>:\%(^\s*\)\@<=\<end\>\s\+\<if\>,' .
+	\ '\%(^\s*\)\@<=\<for\>:\%(^\s*\)\@<=\<next\>,' .
+	\ '\%(^\s*\)\@<=\<while\>:\%(^\s*\)\@<=\<wend\>,' .
+	\ '\%(^\s*\)\@<=\<do\>:\%(^\s*\)\@<=\<loop\>\s\+\<while\>,' .
+	\ '\%(^\s*\)\@<=\<select\>\s\+\<case\>:\%(^\s*\)\@<=\<case\>:\%(^\s*\)\@<=\<end\>\s\+\<select\>,' .
+	\ '\%(^\s*\)\@<=\<enum\>:\%(^\s*\)\@<=\<end\>\s\<enum\>,' .
+	\ '\%(^\s*\)\@<=\<with\>:\%(^\s*\)\@<=\<end\>\s\<with\>,' .
+	\ '\%(^\s*\)\@<=\%(\<\%(private\|public\)\>\s\+\)\=\<function\>\s\+\([^ \t(]\+\):\%(^\s*\)\@<=\<\1\>\s*=:\%(^\s*\)\@<=\<end\>\s\+\<function\>,' .
+	\ '\%(^\s*\)\@<=\%(\<\%(private\|public\)\>\s\+\)\=\<sub\>\s\+:\%(^\s*\)\@<=\<end\>\s\+\<sub\>'
+  let b:undo_ftplugin .= " | unlet! b:match_words b:match_ignorecase"
+endif
 
-" matchit support
-if exists("loaded_matchit")
-    let b:match_ignorecase=1
-    let b:match_words=
-    \ '\%(^\s*\)\@<=\<if\>.*\<then\>\s*$:\%(^\s*\)\@<=\<else\>:\%(^\s*\)\@<=\<elseif\>:\%(^\s*\)\@<=\<end\>\s\+\<if\>,' .
-    \ '\%(^\s*\)\@<=\<for\>:\%(^\s*\)\@<=\<next\>,' .
-    \ '\%(^\s*\)\@<=\<while\>:\%(^\s*\)\@<=\<wend\>,' .
-    \ '\%(^\s*\)\@<=\<do\>:\%(^\s*\)\@<=\<loop\>\s\+\<while\>,' .
-    \ '\%(^\s*\)\@<=\<select\>\s\+\<case\>:\%(^\s*\)\@<=\<case\>:\%(^\s*\)\@<=\<end\>\s\+\<select\>,' .
-    \ '\%(^\s*\)\@<=\<enum\>:\%(^\s*\)\@<=\<end\>\s\<enum\>,' .
-    \ '\%(^\s*\)\@<=\<with\>:\%(^\s*\)\@<=\<end\>\s\<with\>,' .
-    \ '\%(^\s*\)\@<=\%(\<\%(private\|public\)\>\s\+\)\=\<function\>\s\+\([^ \t(]\+\):\%(^\s*\)\@<=\<\1\>\s*=:\%(^\s*\)\@<=\<end\>\s\+\<function\>,' .
-    \ '\%(^\s*\)\@<=\%(\<\%(private\|public\)\>\s\+\)\=\<sub\>\s\+:\%(^\s*\)\@<=\<end\>\s\+\<sub\>'
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let b:browsefilter = "Visual Basic Source Files (*.bas)\t*.bas\n" .
+	\	       "Visual Basic Form Files (*.frm)\t*.frm\n" .
+	\	       "All Files (*.*)\t*.*\n"
+  let b:undo_ftplugin .= " | unlet! b:browsefilter"
 endif
 
 let &cpo = s:cpo_save

runtime/ftplugin/zimbu.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:	Zimbu
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2017 Dec 05
+" Last Change:	2021 Nov 12
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -34,9 +34,11 @@ setlocal errorformat^=%f\ line\ %l\ col\ %c:\ %m,ERROR:\ %m
 
 " When the matchit plugin is loaded, this makes the % command skip parens and
 " braces in comments.
-let b:match_words = '\(^\s*\)\@<=\(MODULE\|CLASS\|INTERFACE\|BITS\|ENUM\|SHARED\|FUNC\|REPLACE\|DEFINE\|PROC\|EQUAL\|MAIN\|IF\|GENERATE_IF\|WHILE\|REPEAT\|WITH\|DO\|FOR\|SWITCH\|TRY\)\>\|{\s*$:\(^\s*\)\@<=\(ELSE\|ELSEIF\|GENERATE_ELSE\|GENERATE_ELSEIF\|CATCH\|FINALLY\)\>:\(^\s*\)\@<=\(}\|\<UNTIL\>\)'
-
-let b:match_skip = 's:comment\|string\|zimbuchar'
+if exists("loaded_matchit") && !exists("b:match_words")
+  let b:match_words = '\(^\s*\)\@<=\(MODULE\|CLASS\|INTERFACE\|BITS\|ENUM\|SHARED\|FUNC\|REPLACE\|DEFINE\|PROC\|EQUAL\|MAIN\|IF\|GENERATE_IF\|WHILE\|REPEAT\|WITH\|DO\|FOR\|SWITCH\|TRY\)\>\|{\s*$:\(^\s*\)\@<=\(ELSE\|ELSEIF\|GENERATE_ELSE\|GENERATE_ELSEIF\|CATCH\|FINALLY\)\>:\(^\s*\)\@<=\(}\|\<UNTIL\>\)'
+  let b:match_skip = 's:comment\|string\|zimbuchar'
+  let b:undo_ftplugin ..= " | unlet! b:match_words b:match_skip"
+endif
 
 setlocal tw=78
 setlocal et sts=2 sw=2
@@ -135,9 +137,60 @@ iabbr <buffer> <expr> until GCUpperSpace("until")
 iabbr <buffer> <expr> while GCUpperSpace("while")
 iabbr <buffer> <expr> repeat GCUpper("repeat")
 
+let b:undo_ftplugin ..=
+      \ " | iunabbr <buffer> alias" ..
+      \ " | iunabbr <buffer> arg" ..
+      \ " | iunabbr <buffer> break" ..
+      \ " | iunabbr <buffer> case" ..
+      \ " | iunabbr <buffer> catch" ..
+      \ " | iunabbr <buffer> check" ..
+      \ " | iunabbr <buffer> class" ..
+      \ " | iunabbr <buffer> interface" ..
+      \ " | iunabbr <buffer> implements" ..
+      \ " | iunabbr <buffer> shared" ..
+      \ " | iunabbr <buffer> continue" ..
+      \ " | iunabbr <buffer> default" ..
+      \ " | iunabbr <buffer> extends" ..
+      \ " | iunabbr <buffer> do" ..
+      \ " | iunabbr <buffer> else" ..
+      \ " | iunabbr <buffer> elseif" ..
+      \ " | iunabbr <buffer> enum" ..
+      \ " | iunabbr <buffer> exit" ..
+      \ " | iunabbr <buffer> false" ..
+      \ " | iunabbr <buffer> fail" ..
+      \ " | iunabbr <buffer> finally" ..
+      \ " | iunabbr <buffer> for" ..
+      \ " | iunabbr <buffer> func" ..
+      \ " | iunabbr <buffer> if" ..
+      \ " | iunabbr <buffer> import" ..
+      \ " | iunabbr <buffer> in" ..
+      \ " | iunabbr <buffer> io" ..
+      \ " | iunabbr <buffer> main" ..
+      \ " | iunabbr <buffer> module" ..
+      \ " | iunabbr <buffer> new" ..
+      \ " | iunabbr <buffer> nil" ..
+      \ " | iunabbr <buffer> ok" ..
+      \ " | iunabbr <buffer> proc" ..
+      \ " | iunabbr <buffer> proceed" ..
+      \ " | iunabbr <buffer> return" ..
+      \ " | iunabbr <buffer> step" ..
+      \ " | iunabbr <buffer> switch" ..
+      \ " | iunabbr <buffer> sys" ..
+      \ " | iunabbr <buffer> this" ..
+      \ " | iunabbr <buffer> throw" ..
+      \ " | iunabbr <buffer> try" ..
+      \ " | iunabbr <buffer> to" ..
+      \ " | iunabbr <buffer> true" ..
+      \ " | iunabbr <buffer> until" ..
+      \ " | iunabbr <buffer> while" ..
+      \ " | iunabbr <buffer> repeat"
+
 if !exists("no_plugin_maps") && !exists("no_zimbu_maps")
   nnoremap <silent> <buffer> [[ m`:call ZimbuGoStartBlock()<CR>
   nnoremap <silent> <buffer> ]] m`:call ZimbuGoEndBlock()<CR>
+  let b:undo_ftplugin ..=
+	\ " | silent! exe 'nunmap <buffer> [['" ..
+	\ " | silent! exe 'nunmap <buffer> ]]'"
 endif
 
 " Using a function makes sure the search pattern is restored

runtime/ftplugin/zsh.vim

@@ -18,13 +18,13 @@ setlocal comments=:# commentstring=#\ %s formatoptions-=t formatoptions+=croql
 
 let b:undo_ftplugin = "setl com< cms< fo< "
 
-if executable('zsh')
+if executable('zsh') && &shell !~# '/\%(nologin\|false\)$'
   if !has('gui_running') && executable('less')
-    command! -buffer -nargs=1 RunHelp silent exe '!MANPAGER= zsh -ic "autoload -Uz run-help; run-help <args> 2>/dev/null | LESS= less"' | redraw!
+    command! -buffer -nargs=1 RunHelp silent exe '!MANPAGER= zsh -c "autoload -Uz run-help; run-help <args> 2>/dev/null | LESS= less"' | redraw!
   elseif has('terminal')
-    command! -buffer -nargs=1 RunHelp silent exe ':term zsh -ic "autoload -Uz run-help; run-help <args>"'
+    command! -buffer -nargs=1 RunHelp silent exe ':term zsh -c "autoload -Uz run-help; run-help <args>"'
   else
-    command! -buffer -nargs=1 RunHelp echo system('zsh -ic "autoload -Uz run-help; run-help <args> 2>/dev/null"')
+    command! -buffer -nargs=1 RunHelp echo system('zsh -c "autoload -Uz run-help; run-help <args> 2>/dev/null"')
   endif
   if !exists('current_compiler')
     compiler zsh

runtime/indent/cdl.vim

@@ -1,5 +1,6 @@
 " Description:	Comshare Dimension Definition Language (CDL)
-" Author:	Raul Segura Acevedo <raulseguraaceved@netscape.net>
+" Maintainer:	Raul Segura Acevedo <raulseguraaceved@netscape.net> (Invalid email address)
+" 		Doug Kearns <dougkearns@gmail.com>
 " Last Change:	Fri Nov 30 13:35:48  2001 CST
 
 if exists("b:did_indent")

runtime/indent/clojure.vim

@@ -1,11 +1,11 @@
 " Vim indent file
 " Language:           Clojure
-" Maintainer:         Alex Vear <av@axvr.io>
+" Maintainer:         Alex Vear <alex@vear.uk>
 " Former Maintainers: Sung Pae <self@sungpae.com>
 "                     Meikel Brandmeyer <mb@kotka.de>
 " URL:                https://github.com/clojure-vim/clojure.vim
 " License:            Vim (see :h license)
-" Last Change:        2021-02-13
+" Last Change:        2021-10-26
 
 if exists("b:did_indent")
 	finish
@@ -24,7 +24,7 @@ setlocal indentkeys=!,o,O
 if exists("*searchpairpos")
 
 	if !exists('g:clojure_maxlines')
-		let g:clojure_maxlines = 100
+		let g:clojure_maxlines = 300
 	endif
 
 	if !exists('g:clojure_fuzzy_indent')
@@ -71,14 +71,10 @@ if exists("*searchpairpos")
 		return s:current_char() =~# '\v[\(\)\[\]\{\}]' && !s:ignored_region()
 	endfunction
 
-	" Returns 1 if string matches a pattern in 'patterns', which may be a
-	" list of patterns, or a comma-delimited string of implicitly anchored
-	" patterns.
+	" Returns 1 if string matches a pattern in 'patterns', which should be
+	" a list of patterns.
 	function! s:match_one(patterns, string)
-		let list = type(a:patterns) == type([])
-		           \ ? a:patterns
-		           \ : map(split(a:patterns, ','), '"^" . v:val . "$"')
-		for pat in list
+		for pat in a:patterns
 			if a:string =~# pat | return 1 | endif
 		endfor
 	endfunction
@@ -215,9 +211,10 @@ if exists("*searchpairpos")
 	endfunction
 
 	" Check if form is a reader conditional, that is, it is prefixed by #?
-	" or @#?
+	" or #?@
 	function! s:is_reader_conditional_special_case(position)
 		return getline(a:position[0])[a:position[1] - 3 : a:position[1] - 2] == "#?"
+			\|| getline(a:position[0])[a:position[1] - 4 : a:position[1] - 2] == "#?@"
 	endfunction
 
 	" Returns 1 for opening brackets, -1 for _anything else_.

runtime/indent/cobol.vim

@@ -7,6 +7,7 @@
 " Ankit Jain      22.03.2019     Changes & fixes:
 "                                Allow chars in 1st 6 columns
 "                                #C22032019
+" Ankit Jain      24.09.2021     add b:undo_indent (request by tpope)
 
 if exists("b:did_indent")
     finish
@@ -18,6 +19,8 @@ setlocal indentexpr=GetCobolIndent(v:lnum)
 setlocal indentkeys&
 setlocal indentkeys+=0<*>,0/,0$,0=01,=~division,=~section,0=~end,0=~then,0=~else,0=~when,*<Return>,.
 
+let b:undo_indent = "setlocal expandtab< indentexpr< indentkeys<"
+
 " Only define the function once.
 if exists("*GetCobolIndent")
     finish

runtime/indent/config.vim

@@ -1,9 +1,10 @@
 " Vim indent file
-" Language:             Autoconf configure.{ac,in} file
-" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2006-12-20
-" TODO:                 how about nested [()]'s in one line
-"                   what's wrong with '\\\@!'?
+" Language:		Autoconf configure.{ac,in} file
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
+" Last Change:		24 Sep 2021
+
+" TODO: how about nested [()]'s in one line what's wrong with '\\\@!'?
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")
@@ -16,6 +17,8 @@ setlocal indentexpr=GetConfigIndent()
 setlocal indentkeys=!^F,o,O,=then,=do,=else,=elif,=esac,=fi,=fin,=fil,=done
 setlocal nosmartindent
 
+let b:undo_indent = "setl inde< indk< si<"
+
 " Only define the function once.
 if exists("*GetConfigIndent")
   finish

runtime/indent/css.vim

@@ -1,8 +1,10 @@
 " Vim indent file
-" Language:	    CSS
-" Maintainer:	    Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2012-05-30
-"		    Use of shiftwidth() added by Oleg Zubchenko.	
+" Language:		CSS
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
+" Last Change:		24 Sep 2021
+
+" Use of shiftwidth() added by Oleg Zubchenko.
 
 if exists("b:did_indent")
   finish
@@ -13,7 +15,7 @@ setlocal indentexpr=GetCSSIndent()
 setlocal indentkeys=0{,0},!^F,o,O
 setlocal nosmartindent
 
-let b:undo_indent = "setl smartindent< indentkeys< indentexpr<"
+let b:undo_indent = "setl inde< indk< si<"
 
 if exists("*GetCSSIndent")
   finish

runtime/indent/d.vim

@@ -1,7 +1,7 @@
 " Vim indent file for the D programming language (version 0.137).
-"
 " Language:	D
-" Maintainer:	Jason Mills<jmills@cs.mun.ca>
+" Maintainer:	Jason Mills <jmills@cs.mun.ca> (Invalid email address)
+" 		Doug Kearns <dougkearns@gmail.com>
 " Last Change:	2005 Nov 22
 " Version:	0.1
 "

runtime/indent/dosbatch.vim

@@ -2,7 +2,7 @@
 " Language:	MSDOS batch file (with NT command extensions)
 " Maintainer:	Ken Takata
 " URL:		https://github.com/k-takata/vim-dosbatch-indent
-" Last Change:	2017 May 10
+" Last Change:	2021-10-18
 " Filenames:	*.bat
 " License:	VIM License
 
@@ -17,6 +17,8 @@ setlocal indentexpr=GetDosBatchIndent(v:lnum)
 setlocal indentkeys=!^F,o,O
 setlocal indentkeys+=0=)
 
+let b:undo_indent = "setl ai< inde< indk< si<"
+
 if exists("*GetDosBatchIndent")
   finish
 endif

runtime/indent/dtd.vim

@@ -1,12 +1,15 @@
 " Vim indent file
-" Language:    	    DTD (Document Type Definition for XML)
-" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2011-07-08
+" Language:		DTD (Document Type Definition for XML)
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
+" Last Change:		24 Sep 2021
 
 setlocal indentexpr=GetDTDIndent()
 setlocal indentkeys=!^F,o,O,>
 setlocal nosmartindent
 
+let b:undo_indent = "setl inde< indk< si<"
+
 if exists("*GetDTDIndent")
   finish
 endif

runtime/indent/dylan.vim

@@ -1,8 +1,9 @@
 " Vim indent file
 " Language:	Dylan
+" Maintainer:	Brent A. Fulgham <bfulgham@debian.org> (Invalid email address)
+" 		Doug Kearns <dougkearns@gmail.com>
 " Version:	0.01
 " Last Change:	2017 Jun 13
-" Maintainer:	Brent A. Fulgham <bfulgham@debian.org>
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")

runtime/indent/elm.vim

@@ -4,7 +4,7 @@
 " Original Author: Joseph Hager <ajhager@gmail.com>
 " Copyright: Joseph Hager <ajhager@gmail.com>
 " License: BSD3
-" Latest Revision: 2020-05-29
+" Latest Revision: 2021-09-29
 
 " Only load this indent file when no other was loaded.
 if exists('b:did_indent')
@@ -19,6 +19,8 @@ setlocal indentkeys+=0=else,0=if,0=of,0=import,0=then,0=type,0\|,0},0\],0),=-},0
 setlocal nolisp
 setlocal nosmartindent
 
+let b:undo_indent = "setl et< inde< indk< lisp< si<"
+
 " Only define the function once.
 if exists('*GetElmIndent')
 	finish

runtime/indent/eterm.vim

@@ -1,7 +1,8 @@
 " Vim indent file
-" Language:             Eterm configuration file
-" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2006-12-20
+" Language:		Eterm configuration file
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
+" Last Change:		24 Sep 2021
 
 if exists("b:did_indent")
   finish
@@ -12,6 +13,8 @@ setlocal indentexpr=GetEtermIndent()
 setlocal indentkeys=!^F,o,O,=end
 setlocal nosmartindent
 
+let b:undo_indent = "setl inde< indk< si<"
+
 if exists("*GetEtermIndent")
   finish
 endif

runtime/indent/framescript.vim

@@ -1,7 +1,8 @@
 " Vim indent file
-" Language:             FrameScript
-" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2008-07-19
+" Language:		FrameScript
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
+" Last Change:		24 Sep 2021
 
 if exists("b:did_indent")
   finish
@@ -12,6 +13,8 @@ setlocal indentexpr=GetFrameScriptIndent()
 setlocal indentkeys=!^F,o,O,0=~Else,0=~EndIf,0=~EndLoop,0=~EndSub
 setlocal nosmartindent
 
+let b:undo_indent = "setl inde< indk< si<"
+
 if exists("*GetFrameScriptIndent")
   finish
 endif