patch 8.2.3672: build failure with unsigned char

Problem:    Build failure with unsigned char.
Solution:   Use int instead of char.

.github/CODEOWNERS

@@ -73,6 +73,8 @@ runtime/ftplugin/awk.vim		@dkearns
 runtime/ftplugin/basic.vim		@dkearns
 runtime/ftplugin/bst.vim		@tpope
 runtime/ftplugin/cfg.vim		@chrisbra
+runtime/ftplugin/clojure.vim		@axvr
+runtime/ftplugin/csh.vim		@dkearns
 runtime/ftplugin/css.vim		@dkearns
 runtime/ftplugin/cucumber.vim		@tpope
 runtime/ftplugin/eiffel.vim		@dkearns
@@ -87,10 +89,12 @@ runtime/ftplugin/gitsendemail.vim	@tpope
 runtime/ftplugin/gprof.vim		@dpelle
 runtime/ftplugin/haml.vim		@tpope
 runtime/ftplugin/hgcommit.vim		@k-takata
+runtime/ftplugin/indent.vim		@dkearns
 runtime/ftplugin/javascript.vim		@dkearns
 runtime/ftplugin/javascriptreact.vim	@dkearns
 runtime/ftplugin/kconfig.vim		@chrisbra
 runtime/ftplugin/liquid.vim		@tpope
+runtime/ftplugin/lua.vim		@dkearns
 runtime/ftplugin/m3build.vim		@dkearns
 runtime/ftplugin/m3quake.vim		@dkearns
 runtime/ftplugin/markdown.vim		@tpope
@@ -106,19 +110,23 @@ runtime/ftplugin/pbtxt.vim		@lakshayg
 runtime/ftplugin/pdf.vim		@tpope
 runtime/ftplugin/ps1.vim		@heaths
 runtime/ftplugin/ps1xml.vim		@heaths
+runtime/ftplugin/routeros.vim		@zainin
 runtime/ftplugin/ruby.vim		@tpope @dkearns
 runtime/ftplugin/sass.vim		@tpope
 runtime/ftplugin/scss.vim		@tpope
 runtime/ftplugin/spec.vim		@ignatenkobrain
 runtime/ftplugin/systemverilog.vim	@Kocha
+runtime/ftplugin/tcsh.vim		@dkearns
 runtime/ftplugin/tidy.vim		@dkearns
 runtime/ftplugin/tmux.vim		@ericpruitt
+runtime/ftplugin/toml.vim		@averms
 runtime/ftplugin/typescript.vim		@dkearns
 runtime/ftplugin/typescriptreact.vim	@dkearns
 runtime/ftplugin/xml.vim		@chrisbra
 runtime/ftplugin/zsh.vim		@chrisbra
 runtime/indent/bst.vim			@tpope
 runtime/indent/cdl.vim			@dkearns
+runtime/indent/clojure.vim		@axvr
 runtime/indent/config.vim		@dkearns
 runtime/indent/css.vim			@dkearns
 runtime/indent/cucumber.vim		@tpope
@@ -151,6 +159,7 @@ runtime/indent/scss.vim			@tpope
 runtime/indent/sh.vim			@chrisbra
 runtime/indent/systemverilog.vim	@Kocha
 runtime/indent/tcl.vim			@dkearns
+runtime/indent/tcsh.vim			@dkearns
 runtime/indent/teraterm.vim		@k-takata
 runtime/indent/xml.vim			@chrisbra
 runtime/indent/zsh.vim			@chrisbra
@@ -165,6 +174,7 @@ runtime/plugin/vimballPlugin.vim	@cecamp
 runtime/plugin/zipPlugin.vim		@cecamp
 runtime/syntax/aidl.vim			@dpelle
 runtime/syntax/amiga.vim		@cecamp
+runtime/syntax/arduino.vim		@johshoff
 runtime/syntax/asm.vim			@dkearns
 runtime/syntax/asmh8300.vim		@dkearns
 runtime/syntax/asterisk.vim		@jaunis
@@ -174,6 +184,7 @@ runtime/syntax/bst.vim			@tpope
 runtime/syntax/cabal.vim		@coot
 runtime/syntax/cabalconfig.vim		@coot
 runtime/syntax/cabalproject.vim		@coot
+runtime/syntax/clojure.vim		@axvr
 runtime/syntax/cs.vim			@nickspoons
 runtime/syntax/csh.vim			@cecamp
 runtime/syntax/cucumber.vim		@tpope
@@ -197,6 +208,7 @@ runtime/syntax/groff.vim		@jmarshall
 runtime/syntax/haml.vim			@tpope
 runtime/syntax/haskell.vim		@coot
 runtime/syntax/hgcommit.vim		@k-takata
+runtime/syntax/indent.vim		@dkearns
 runtime/syntax/kconfig.vim		@chrisbra
 runtime/syntax/less.vim			@genoma
 runtime/syntax/lex.vim			@cecamp
@@ -225,6 +237,7 @@ runtime/syntax/ps1.vim			@heaths
 runtime/syntax/ps1xml.vim		@heaths
 runtime/syntax/psl.vim			@danielkho
 runtime/syntax/rc.vim			@chrisbra
+runtime/syntax/routeros.vim		@zainin
 runtime/syntax/rpcgen.vim		@cecamp
 runtime/syntax/ruby.vim			@dkearns
 runtime/syntax/sass.vim			@tpope
@@ -238,10 +251,12 @@ runtime/syntax/sshdconfig.vim		@Jakuje
 runtime/syntax/sudoers.vim		@e-kwsm
 runtime/syntax/systemverilog.vim	@Kocha
 runtime/syntax/tags.vim			@cecamp
+runtime/syntax/tcsh.vim			@dkearns
 runtime/syntax/teraterm.vim		@k-takata
 runtime/syntax/tex.vim			@cecamp
 runtime/syntax/tidy.vim			@dkearns
 runtime/syntax/tmux.vim			@ericpruitt
+runtime/syntax/toml.vim			@averms
 runtime/syntax/vim.vim			@cecamp
 runtime/syntax/wget.vim			@dkearns
 runtime/syntax/xbl.vim			@dkearns

.github/ISSUE_TEMPLATE/bug_report.md

@@ -1,34 +0,0 @@
----
-name: Bug report
-about: Create a report to help us improve Vim
-title: ''
-labels: ''
-
----
-
-_Instructions: Replace the template text and remove irrelevant text (including this line)_
-
-**Describe the bug**
-A clear and concise description of what the bug is.
-(Issues related to the runtime files should be reported to their maintainer, check the file header.)
-
-**To Reproduce**
-Detailed steps to reproduce the behavior:
-1. Run `vim --clean` (or `gvim --clean`, etc.)
-2. Edit `filename`
-3. Type '....'
-4. Describe the error
-
-**Expected behavior**
-A clear and concise description of what you expected to happen.
-
-**Screenshots**
-If applicable, copy/paste the text or add screenshots to help explain your problem.
-
-**Environment (please complete the following information):**
- - Vim version [e.g. 8.1.1234] (Or paste the result of `vim --version`.)
- - OS: [e.g. Ubuntu 18.04, Windows 10 1809, macOS 10.14]
- - Terminal: [e.g. GNOME Terminal, mintty, iTerm2, tmux, GNU screen] (Use GUI if you use the GUI.)
-
-**Additional context**
-Add any other context about the problem here.

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -0,0 +1,47 @@
+---
+name: Bug report
+description: Create a report to help us improve Vim.
+labels: [bug]
+
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Thanks for reporting issues of Vim!
+        
+        To make it easier for us to help you please enter detailed information below.
+  - type: textarea
+    attributes:
+      label: Steps to reproduce
+      placeholder: |
+        1. 
+        2. 
+        3. 
+        4. 
+    validations:
+      required: true
+  - type: textarea
+    attributes:
+      label: Expected behaviour
+      placeholder: A clear and concise description of what you expected to happen.
+    validations:
+      required: true
+  - type: input
+    attributes:
+      label: Operating system
+      description: >
+        Your operating system name, version and desktop environment.
+    validations:
+      required: true
+  - type: input
+    attributes:
+      label: Version of Vim
+      description: >
+        The name of your development environment, version. [e.g. GNOME Terminal (v0.0.0000)]
+    validations:
+      required: true
+  - type: textarea
+    attributes:
+      label: Logs and stack traces
+      placeholder: Insert log or other text here (if necessary)
+      render: shell

.github/workflows/ci.yml

@@ -40,6 +40,7 @@ jobs:
             compiler: gcc
             coverage: true
             extra: testgui
+            uchar: true
           - features: huge
             compiler: clang
             extra: asan
@@ -80,7 +81,7 @@ jobs:
           wget -O - https://apt.llvm.org/llvm-snapshot.gpg.key | sudo apt-key add -
           . /etc/lsb-release
           sudo add-apt-repository -y "deb http://apt.llvm.org/${DISTRIB_CODENAME}/ llvm-toolchain-${DISTRIB_CODENAME}-11 main"
-          sudo apt-get install -y clang-11
+          sudo apt-get install -y clang-11 llvm-11
           sudo update-alternatives --install /usr/bin/clang clang /usr/bin/clang-11 100
           sudo update-alternatives --set clang /usr/bin/clang-11
           sudo update-alternatives --install /usr/bin/llvm-cov llvm-cov /usr/bin/llvm-cov-11 100
@@ -111,10 +112,14 @@ jobs:
             ;;
           esac
 
+          CFLAGS=""
           if ${{ matrix.coverage == true }}; then
-            echo "CFLAGS=--coverage -DUSE_GCOV_FLUSH"
+            CFLAGS="$CFLAGS --coverage -DUSE_GCOV_FLUSH"
             echo "LDFLAGS=--coverage"
           fi
+          if ${{ matrix.uchar == true }}; then
+            CFLAGS="$CFLAGS -funsigned-char"
+          fi
           if ${{ contains(matrix.extra, 'testgui') }}; then
             echo "TEST=-C src testgui"
           fi
@@ -130,6 +135,7 @@ jobs:
           if ${{ contains(matrix.extra, 'vimtags') }}; then
             echo "TEST=-C runtime/doc vimtags VIMEXE=../../${SRCDIR}/vim"
           fi
+          echo "CFLAGS=$CFLAGS"
           ) >> $GITHUB_ENV
 
       - name: Set up system

Filelist

@@ -7,6 +7,7 @@ SRC_ALL =	\
 		.coveralls.yml \
 		.gitattributes \
 		.github/CODEOWNERS \
+		.github/ISSUE_TEMPLATE/bug_report.yml \
 		.github/workflows/ci.yml \
 		.github/workflows/codeql-analysis.yml \
 		.github/workflows/coverity.yml \
@@ -142,7 +143,7 @@ SRC_ALL =	\
 		src/tag.c \
 		src/term.c \
 		src/terminal.c \
-		src/term.h \
+		src/termdefs.h \
 		src/termlib.c \
 		src/testing.c \
 		src/textformat.c \
@@ -376,6 +377,7 @@ SRC_ALL =	\
 		src/libvterm/t/30state_pen.test \
 		src/libvterm/t/31state_rep.test \
 		src/libvterm/t/32state_flow.test \
+		src/libvterm/t/40state_selection.test \
 		src/libvterm/t/60screen_ascii.test \
 		src/libvterm/t/61screen_unicode.test \
 		src/libvterm/t/62screen_damage.test \
@@ -798,6 +800,7 @@ RT_SCRIPTS =	\
 		runtime/autoload/xml/*.vim \
 		runtime/colors/*.vim \
 		runtime/colors/README.txt \
+		runtime/colors/lists/*.vim \
 		runtime/colors/tools/*.vim \
 		runtime/compiler/*.vim \
 		runtime/compiler/README.txt \
@@ -850,7 +853,6 @@ RT_AMI_DOS =	\
 # DOS runtime (also in the extra archive)
 RT_DOS =	\
 		README_dos.txt \
-		runtime/rgb.txt \
 		vimtutor.bat \
 
 # DOS runtime without CR-LF translation (also in the extra archive)

READMEdir/README_extra.txt

@@ -26,7 +26,6 @@ src/os_win32.*		Files for the Win32 port.
 src/gui_w32.*		Files for the Win32 GUI.
 src/gui_w48.*		Files for the Win32 and Win16 GUI.
 src/Make_mvc.mak	MS Visual C++ makefile for the Win32 GUI.
-runtime/rgb.txt		File with color definitions for the Win32 GUI.
 
 src/if_ole.*		OLE automation interface, for MS Windows 95 and NT.
 

nsis/gvim.nsi

@@ -357,7 +357,6 @@ Section "$(str_section_exe)" id_section_exe
 	File ..\README.txt
 	File ..\uninstall.txt
 	File ${VIMRT}\*.vim
-	File ${VIMRT}\rgb.txt
 
 	File ${VIMTOOLS}\diff.exe
 	File ${VIMTOOLS}\winpty${BIT}.dll
@@ -367,6 +366,8 @@ Section "$(str_section_exe)" id_section_exe
 	File ${VIMRT}\colors\*.*
 	SetOutPath $0\colors\tools
 	File ${VIMRT}\colors\tools\*.*
+	SetOutPath $0\colors\lists
+	File ${VIMRT}\colors\lists\*.*
 
 	SetOutPath $0\compiler
 	File ${VIMRT}\compiler\*.*

runtime/autoload/zip.vim

@@ -1,7 +1,7 @@
 " zip.vim: Handles browsing zipfiles
 "            AUTOLOAD PORTION
-" Date:		Jan 07, 2020
-" Version:	31
+" Date:		Nov 08, 2021
+" Version:	32
 " Maintainer:	Charles E Campbell <NcampObell@SdrPchip.AorgM-NOSPAM>
 " License:	Vim License  (see vim's :help license)
 " Copyright:    Copyright (C) 2005-2019 Charles E. Campbell {{{1
@@ -20,7 +20,7 @@
 if &cp || exists("g:loaded_zip")
  finish
 endif
-let g:loaded_zip= "v31"
+let g:loaded_zip= "v32"
 if v:version < 702
  echohl WarningMsg
  echo "***warning*** this version of zip needs vim 7.2 or later"
@@ -115,7 +115,13 @@ fun! zip#Browse(zipfile)
   setlocal bufhidden=hide
   setlocal nobuflisted
   setlocal nowrap
-  set ft=tar
+
+  " Oct 12, 2021: need to re-use Bram's syntax/tar.vim.
+  " Setting the filetype to zip doesn't do anything (currently),
+  " but it is perhaps less confusing to curious perusers who do
+  " a :echo &ft
+  setf zip
+  run! syntax/tar.vim
 
   " give header
   call append(0, ['" zip.vim version '.g:loaded_zip,
@@ -187,8 +193,8 @@ fun! s:ZipBrowseSelect()
    wincmd _
   endif
   let s:zipfile_{winnr()}= curfile
-"  call Decho("exe e ".fnameescape("zipfile:".zipfile.'::'.fname))
-  exe "noswapfile e ".fnameescape("zipfile:".zipfile.'::'.fname)
+"  call Decho("exe e ".fnameescape("zipfile://".zipfile.'::'.fname))
+  exe "noswapfile e ".fnameescape("zipfile://".zipfile.'::'.fname)
   filetype detect
 
   let &report= repkeep
@@ -203,11 +209,11 @@ fun! zip#Read(fname,mode)
   set report=10
 
   if has("unix")
-   let zipfile = substitute(a:fname,'zipfile:\(.\{-}\)::[^\\].*$','\1','')
-   let fname   = substitute(a:fname,'zipfile:.\{-}::\([^\\].*\)$','\1','')
+   let zipfile = substitute(a:fname,'zipfile://\(.\{-}\)::[^\\].*$','\1','')
+   let fname   = substitute(a:fname,'zipfile://.\{-}::\([^\\].*\)$','\1','')
   else
-   let zipfile = substitute(a:fname,'^.\{-}zipfile:\(.\{-}\)::[^\\].*$','\1','')
-   let fname   = substitute(a:fname,'^.\{-}zipfile:.\{-}::\([^\\].*\)$','\1','')
+   let zipfile = substitute(a:fname,'^.\{-}zipfile://\(.\{-}\)::[^\\].*$','\1','')
+   let fname   = substitute(a:fname,'^.\{-}zipfile://.\{-}::\([^\\].*\)$','\1','')
    let fname   = substitute(fname, '[', '[[]', 'g')
   endif
 "  call Decho("zipfile<".zipfile.">")
@@ -224,7 +230,7 @@ fun! zip#Read(fname,mode)
 
   " the following code does much the same thing as
   "   exe "keepj sil! r! ".g:zip_unzipcmd." -p -- ".s:Escape(zipfile,1)." ".s:Escape(fnameescape(fname),1)
-  " but allows zipfile:... entries in quickfix lists
+  " but allows zipfile://... entries in quickfix lists
   let temp = tempname()
 "  call Decho("using temp file<".temp.">")
   let fn   = expand('%:p')
@@ -296,11 +302,11 @@ fun! zip#Write(fname)
 "  call Decho("current directory now: ".getcwd())
 
   if has("unix")
-   let zipfile = substitute(a:fname,'zipfile:\(.\{-}\)::[^\\].*$','\1','')
-   let fname   = substitute(a:fname,'zipfile:.\{-}::\([^\\].*\)$','\1','')
+   let zipfile = substitute(a:fname,'zipfile://\(.\{-}\)::[^\\].*$','\1','')
+   let fname   = substitute(a:fname,'zipfile://.\{-}::\([^\\].*\)$','\1','')
   else
-   let zipfile = substitute(a:fname,'^.\{-}zipfile:\(.\{-}\)::[^\\].*$','\1','')
-   let fname   = substitute(a:fname,'^.\{-}zipfile:.\{-}::\([^\\].*\)$','\1','')
+   let zipfile = substitute(a:fname,'^.\{-}zipfile://\(.\{-}\)::[^\\].*$','\1','')
+   let fname   = substitute(a:fname,'^.\{-}zipfile://.\{-}::\([^\\].*\)$','\1','')
   endif
 "  call Decho("zipfile<".zipfile.">")
 "  call Decho("fname  <".fname.">")

runtime/colors/README.txt

@@ -87,4 +87,5 @@ please check the following items:
 - In the GUI, is it easy to find the cursor, also in a file with lots of
   syntax highlighting?
 - Do not use hard coded escape sequences, these will not work in other
-  terminals.  Always use color names or #RRGGBB for the GUI.
+  terminals.  Always use color names or #RRGGBB for the GUI. See v:colornames
+  for details on how to define your own color names.

runtime/colors/lists/csscolors.vim

@@ -0,0 +1,166 @@
+" Maintainer:  Drew Vogel <dvogel@sidejump.org>
+" Last Change: 2021 Jul 25
+
+" Similar in spirit to rgb.txt, this plugin establishes a human-friendly name
+" for every color listed in the CSS standard:
+"
+" https://www.w3.org/TR/css-color-3/
+
+let s:keepcpo= &cpo
+set cpo&vim
+
+call extend(v:colornames, {
+			\ 'css_black': '#000000',
+			\ 'css_silver': '#c0c0c0',
+			\ 'css_gray': '#808080',
+			\ 'css_white': '#FFFFFF',
+			\ 'css_maroon': '#800000',
+			\ 'css_red': '#FF0000',
+			\ 'css_purple': '#800080',
+			\ 'css_fuchsia': '#FF00FF',
+			\ 'css_green': '#008000',
+			\ 'css_lime': '#00FF00',
+			\ 'css_olive': '#808000',
+			\ 'css_yellow': '#FFFF00',
+			\ 'css_navy': '#000080',
+			\ 'css_blue': '#0000FF',
+			\ 'css_teal': '#008080',
+			\ 'css_aqua': '#00FFFF',
+			\
+			\ 'css_aliceblue': '#f0f8ff',
+			\ 'css_antiquewhite': '#faebd7',
+			\ 'css_aquamarine': '#7fffd4',
+			\ 'css_azure': '#f0ffff',
+			\ 'css_beige': '#f5f5dc',
+			\ 'css_bisque': '#ffe4c4',
+			\ 'css_blanchedalmond': '#ffebcd',
+			\ 'css_blueviolet': '#8a2be2',
+			\ 'css_brown': '#a52a2a',
+			\ 'css_burlywood': '#deb887',
+			\ 'css_cadetblue': '#5f9ea0',
+			\ 'css_chartreuse': '#7fff00',
+			\ 'css_chocolate': '#d2691e',
+			\ 'css_coral': '#ff7f50',
+			\ 'css_cornflowerblue': '#6495ed',
+			\ 'css_cornsilk': '#fff8dc',
+			\ 'css_crimson': '#dc143c',
+			\ 'css_cyan': '#00ffff',
+			\ 'css_darkblue': '#00008b',
+			\ 'css_darkcyan': '#008b8b',
+			\ 'css_darkgoldenrod': '#b8860b',
+			\ 'css_darkgray': '#a9a9a9',
+			\ 'css_darkgreen': '#006400',
+			\ 'css_darkgrey': '#a9a9a9',
+			\ 'css_darkkhaki': '#bdb76b',
+			\ 'css_darkmagenta': '#8b008b',
+			\ 'css_darkolivegreen': '#556b2f',
+			\ 'css_darkorange': '#ff8c00',
+			\ 'css_darkorchid': '#9932cc',
+			\ 'css_darkred': '#8b0000',
+			\ 'css_darksalmon': '#e9967a',
+			\ 'css_darkseagreen': '#8fbc8f',
+			\ 'css_darkslateblue': '#483d8b',
+			\ 'css_darkslategray': '#2f4f4f',
+			\ 'css_darkslategrey': '#2f4f4f',
+			\ 'css_darkturquoise': '#00ced1',
+			\ 'css_darkviolet': '#9400d3',
+			\ 'css_deeppink': '#ff1493',
+			\ 'css_deepskyblue': '#00bfff',
+			\ 'css_dimgray': '#696969',
+			\ 'css_dimgrey': '#696969',
+			\ 'css_dodgerblue': '#1e90ff',
+			\ 'css_firebrick': '#b22222',
+			\ 'css_floralwhite': '#fffaf0',
+			\ 'css_forestgreen': '#228b22',
+			\ 'css_gainsboro': '#dcdcdc',
+			\ 'css_ghostwhite': '#f8f8ff',
+			\ 'css_gold': '#ffd700',
+			\ 'css_goldenrod': '#daa520',
+			\ 'css_greenyellow': '#adff2f',
+			\ 'css_grey': '#808080',
+			\ 'css_honeydew': '#f0fff0',
+			\ 'css_hotpink': '#ff69b4',
+			\ 'css_indianred': '#cd5c5c',
+			\ 'css_indigo': '#4b0082',
+			\ 'css_ivory': '#fffff0',
+			\ 'css_khaki': '#f0e68c',
+			\ 'css_lavender': '#e6e6fa',
+			\ 'css_lavenderblush': '#fff0f5',
+			\ 'css_lawngreen': '#7cfc00',
+			\ 'css_lemonchiffon': '#fffacd',
+			\ 'css_lightblue': '#add8e6',
+			\ 'css_lightcoral': '#f08080',
+			\ 'css_lightcyan': '#e0ffff',
+			\ 'css_lightgoldenrodyellow': '#fafad2',
+			\ 'css_lightgray': '#d3d3d3',
+			\ 'css_lightgreen': '#90ee90',
+			\ 'css_lightgrey': '#d3d3d3',
+			\ 'css_lightpink': '#ffb6c1',
+			\ 'css_lightsalmon': '#ffa07a',
+			\ 'css_lightseagreen': '#20b2aa',
+			\ 'css_lightskyblue': '#87cefa',
+			\ 'css_lightslategray': '#778899',
+			\ 'css_lightslategrey': '#778899',
+			\ 'css_lightsteelblue': '#b0c4de',
+			\ 'css_lightyellow': '#ffffe0',
+			\ 'css_limegreen': '#32cd32',
+			\ 'css_linen': '#faf0e6',
+			\ 'css_magenta': '#ff00ff',
+			\ 'css_mediumaquamarine': '#66cdaa',
+			\ 'css_mediumblue': '#0000cd',
+			\ 'css_mediumorchid': '#ba55d3',
+			\ 'css_mediumpurple': '#9370db',
+			\ 'css_mediumseagreen': '#3cb371',
+			\ 'css_mediumslateblue': '#7b68ee',
+			\ 'css_mediumspringgreen': '#00fa9a',
+			\ 'css_mediumturquoise': '#48d1cc',
+			\ 'css_mediumvioletred': '#c71585',
+			\ 'css_midnightblue': '#191970',
+			\ 'css_mintcream': '#f5fffa',
+			\ 'css_mistyrose': '#ffe4e1',
+			\ 'css_moccasin': '#ffe4b5',
+			\ 'css_navajowhite': '#ffdead',
+			\ 'css_oldlace': '#fdf5e6',
+			\ 'css_olivedrab': '#6b8e23',
+			\ 'css_orange': '#ffa500',
+			\ 'css_orangered': '#ff4500',
+			\ 'css_orchid': '#da70d6',
+			\ 'css_palegoldenrod': '#eee8aa',
+			\ 'css_palegreen': '#98fb98',
+			\ 'css_paleturquoise': '#afeeee',
+			\ 'css_palevioletred': '#db7093',
+			\ 'css_papayawhip': '#ffefd5',
+			\ 'css_peachpuff': '#ffdab9',
+			\ 'css_peru': '#cd853f',
+			\ 'css_pink': '#ffc0cb',
+			\ 'css_plum': '#dda0dd',
+			\ 'css_powderblue': '#b0e0e6',
+			\ 'css_rosybrown': '#bc8f8f',
+			\ 'css_royalblue': '#4169e1',
+			\ 'css_saddlebrown': '#8b4513',
+			\ 'css_salmon': '#fa8072',
+			\ 'css_sandybrown': '#f4a460',
+			\ 'css_seagreen': '#2e8b57',
+			\ 'css_seashell': '#fff5ee',
+			\ 'css_sienna': '#a0522d',
+			\ 'css_skyblue': '#87ceeb',
+			\ 'css_slateblue': '#6a5acd',
+			\ 'css_slategray': '#708090',
+			\ 'css_slategrey': '#708090',
+			\ 'css_snow': '#fffafa',
+			\ 'css_springgreen': '#00ff7f',
+			\ 'css_steelblue': '#4682b4',
+			\ 'css_tan': '#d2b48c',
+			\ 'css_thistle': '#d8bfd8',
+			\ 'css_tomato': '#ff6347',
+			\ 'css_turquoise': '#40e0d0',
+			\ 'css_violet': '#ee82ee',
+			\ 'css_wheat': '#f5deb3',
+			\ 'css_whitesmoke': '#f5f5f5',
+			\ 'css_yellowgreen': '#9acd32',
+			\ }, 'keep')
+
+let &cpo= s:keepcpo
+unlet s:keepcpo
+
+"vim: sw=4

runtime/colors/lists/default.vim

@@ -0,0 +1,801 @@
+" Maintainer:  Drew Vogel <dvogel@sidejump.org>
+" Last Change: 2021 Jul 25
+"
+" Replaced rgb.txt as the source of de facto standard color names. This is
+" sourced each time the colorscheme command is run. It is also sourced each
+" time the highlight command fails to recognize a gui color. You can override
+" these colors by introducing a new colors/lists/default.vim file earlier in
+" the runtimepath.
+
+let s:keepcpo= &cpo
+set cpo&vim
+
+call extend(v:colornames, {
+			\ 'snow': '#fffafa',
+			\ 'ghost white': '#f8f8ff',
+			\ 'ghostwhite': '#f8f8ff',
+			\ 'white smoke': '#f5f5f5',
+			\ 'whitesmoke': '#f5f5f5',
+			\ 'gainsboro': '#dcdcdc',
+			\ 'floral white': '#fffaf0',
+			\ 'floralwhite': '#fffaf0',
+			\ 'old lace': '#fdf5e6',
+			\ 'oldlace': '#fdf5e6',
+			\ 'linen': '#faf0e6',
+			\ 'antique white': '#faebd7',
+			\ 'antiquewhite': '#faebd7',
+			\ 'papaya whip': '#ffefd5',
+			\ 'papayawhip': '#ffefd5',
+			\ 'blanched almond': '#ffebcd',
+			\ 'blanchedalmond': '#ffebcd',
+			\ 'bisque': '#ffe4c4',
+			\ 'peach puff': '#ffdab9',
+			\ 'peachpuff': '#ffdab9',
+			\ 'navajo white': '#ffdead',
+			\ 'navajowhite': '#ffdead',
+			\ 'moccasin': '#ffe4b5',
+			\ 'cornsilk': '#fff8dc',
+			\ 'ivory': '#fffff0',
+			\ 'lemon chiffon': '#fffacd',
+			\ 'lemonchiffon': '#fffacd',
+			\ 'seashell': '#fff5ee',
+			\ 'honeydew': '#f0fff0',
+			\ 'mint cream': '#f5fffa',
+			\ 'mintcream': '#f5fffa',
+			\ 'azure': '#f0ffff',
+			\ 'alice blue': '#f0f8ff',
+			\ 'aliceblue': '#f0f8ff',
+			\ 'lavender': '#e6e6fa',
+			\ 'lavender blush': '#fff0f5',
+			\ 'lavenderblush': '#fff0f5',
+			\ 'misty rose': '#ffe4e1',
+			\ 'mistyrose': '#ffe4e1',
+			\ 'white': '#ffffff',
+			\ 'black': '#000000',
+			\ 'dark slate gray': '#2f4f4f',
+			\ 'darkslategray': '#2f4f4f',
+			\ 'dark slate grey': '#2f4f4f',
+			\ 'darkslategrey': '#2f4f4f',
+			\ 'dim gray': '#696969',
+			\ 'dimgray': '#696969',
+			\ 'dim grey': '#696969',
+			\ 'dimgrey': '#696969',
+			\ 'slate gray': '#708090',
+			\ 'slategray': '#708090',
+			\ 'slate grey': '#708090',
+			\ 'slategrey': '#708090',
+			\ 'light slate gray': '#778899',
+			\ 'lightslategray': '#778899',
+			\ 'light slate grey': '#778899',
+			\ 'lightslategrey': '#778899',
+			\ 'gray': '#bebebe',
+			\ 'grey': '#bebebe',
+			\ 'x11 gray': '#bebebe',
+			\ 'x11gray': '#bebebe',
+			\ 'x11 grey': '#bebebe',
+			\ 'x11grey': '#bebebe',
+			\ 'web gray': '#808080',
+			\ 'webgray': '#808080',
+			\ 'web grey': '#808080',
+			\ 'webgrey': '#808080',
+			\ 'light grey': '#d3d3d3',
+			\ 'lightgrey': '#d3d3d3',
+			\ 'light gray': '#d3d3d3',
+			\ 'lightgray': '#d3d3d3',
+			\ 'midnight blue': '#191970',
+			\ 'midnightblue': '#191970',
+			\ 'navy': '#000080',
+			\ 'navy blue': '#000080',
+			\ 'navyblue': '#000080',
+			\ 'cornflower blue': '#6495ed',
+			\ 'cornflowerblue': '#6495ed',
+			\ 'dark slate blue': '#483d8b',
+			\ 'darkslateblue': '#483d8b',
+			\ 'slate blue': '#6a5acd',
+			\ 'slateblue': '#6a5acd',
+			\ 'medium slate blue': '#7b68ee',
+			\ 'mediumslateblue': '#7b68ee',
+			\ 'light slate blue': '#8470ff',
+			\ 'lightslateblue': '#8470ff',
+			\ 'medium blue': '#0000cd',
+			\ 'mediumblue': '#0000cd',
+			\ 'royal blue': '#4169e1',
+			\ 'royalblue': '#4169e1',
+			\ 'blue': '#0000ff',
+			\ 'dodger blue': '#1e90ff',
+			\ 'dodgerblue': '#1e90ff',
+			\ 'deep sky blue': '#00bfff',
+			\ 'deepskyblue': '#00bfff',
+			\ 'sky blue': '#87ceeb',
+			\ 'skyblue': '#87ceeb',
+			\ 'light sky blue': '#87cefa',
+			\ 'lightskyblue': '#87cefa',
+			\ 'steel blue': '#4682b4',
+			\ 'steelblue': '#4682b4',
+			\ 'light steel blue': '#b0c4de',
+			\ 'lightsteelblue': '#b0c4de',
+			\ 'light blue': '#add8e6',
+			\ 'lightblue': '#add8e6',
+			\ 'powder blue': '#b0e0e6',
+			\ 'powderblue': '#b0e0e6',
+			\ 'pale turquoise': '#afeeee',
+			\ 'paleturquoise': '#afeeee',
+			\ 'dark turquoise': '#00ced1',
+			\ 'darkturquoise': '#00ced1',
+			\ 'medium turquoise': '#48d1cc',
+			\ 'mediumturquoise': '#48d1cc',
+			\ 'turquoise': '#40e0d0',
+			\ 'cyan': '#00ffff',
+			\ 'aqua': '#00ffff',
+			\ 'light cyan': '#e0ffff',
+			\ 'lightcyan': '#e0ffff',
+			\ 'cadet blue': '#5f9ea0',
+			\ 'cadetblue': '#5f9ea0',
+			\ 'medium aquamarine': '#66cdaa',
+			\ 'mediumaquamarine': '#66cdaa',
+			\ 'aquamarine': '#7fffd4',
+			\ 'dark green': '#006400',
+			\ 'darkgreen': '#006400',
+			\ 'dark olive green': '#556b2f',
+			\ 'darkolivegreen': '#556b2f',
+			\ 'dark sea green': '#8fbc8f',
+			\ 'darkseagreen': '#8fbc8f',
+			\ 'sea green': '#2e8b57',
+			\ 'seagreen': '#2e8b57',
+			\ 'medium sea green': '#3cb371',
+			\ 'mediumseagreen': '#3cb371',
+			\ 'light sea green': '#20b2aa',
+			\ 'lightseagreen': '#20b2aa',
+			\ 'pale green': '#98fb98',
+			\ 'palegreen': '#98fb98',
+			\ 'spring green': '#00ff7f',
+			\ 'springgreen': '#00ff7f',
+			\ 'lawn green': '#7cfc00',
+			\ 'lawngreen': '#7cfc00',
+			\ 'green': '#00ff00',
+			\ 'lime': '#00ff00',
+			\ 'x11 green': '#00ff00',
+			\ 'x11green': '#00ff00',
+			\ 'web green': '#008000',
+			\ 'webgreen': '#008000',
+			\ 'chartreuse': '#7fff00',
+			\ 'medium spring green': '#00fa9a',
+			\ 'mediumspringgreen': '#00fa9a',
+			\ 'green yellow': '#adff2f',
+			\ 'greenyellow': '#adff2f',
+			\ 'lime green': '#32cd32',
+			\ 'limegreen': '#32cd32',
+			\ 'yellow green': '#9acd32',
+			\ 'yellowgreen': '#9acd32',
+			\ 'forest green': '#228b22',
+			\ 'forestgreen': '#228b22',
+			\ 'olive drab': '#6b8e23',
+			\ 'olivedrab': '#6b8e23',
+			\ 'dark khaki': '#bdb76b',
+			\ 'darkkhaki': '#bdb76b',
+			\ 'khaki': '#f0e68c',
+			\ 'pale goldenrod': '#eee8aa',
+			\ 'palegoldenrod': '#eee8aa',
+			\ 'light goldenrod yellow': '#fafad2',
+			\ 'lightgoldenrodyellow': '#fafad2',
+			\ 'light yellow': '#ffffe0',
+			\ 'lightyellow': '#ffffe0',
+			\ 'yellow': '#ffff00',
+			\ 'gold': '#ffd700',
+			\ 'light goldenrod': '#eedd82',
+			\ 'lightgoldenrod': '#eedd82',
+			\ 'goldenrod': '#daa520',
+			\ 'dark goldenrod': '#b8860b',
+			\ 'darkgoldenrod': '#b8860b',
+			\ 'rosy brown': '#bc8f8f',
+			\ 'rosybrown': '#bc8f8f',
+			\ 'indian red': '#cd5c5c',
+			\ 'indianred': '#cd5c5c',
+			\ 'saddle brown': '#8b4513',
+			\ 'saddlebrown': '#8b4513',
+			\ 'sienna': '#a0522d',
+			\ 'peru': '#cd853f',
+			\ 'burlywood': '#deb887',
+			\ 'beige': '#f5f5dc',
+			\ 'wheat': '#f5deb3',
+			\ 'sandy brown': '#f4a460',
+			\ 'sandybrown': '#f4a460',
+			\ 'tan': '#d2b48c',
+			\ 'chocolate': '#d2691e',
+			\ 'firebrick': '#b22222',
+			\ 'brown': '#a52a2a',
+			\ 'dark salmon': '#e9967a',
+			\ 'darksalmon': '#e9967a',
+			\ 'salmon': '#fa8072',
+			\ 'light salmon': '#ffa07a',
+			\ 'lightsalmon': '#ffa07a',
+			\ 'orange': '#ffa500',
+			\ 'dark orange': '#ff8c00',
+			\ 'darkorange': '#ff8c00',
+			\ 'coral': '#ff7f50',
+			\ 'light coral': '#f08080',
+			\ 'lightcoral': '#f08080',
+			\ 'tomato': '#ff6347',
+			\ 'orange red': '#ff4500',
+			\ 'orangered': '#ff4500',
+			\ 'red': '#ff0000',
+			\ 'hot pink': '#ff69b4',
+			\ 'hotpink': '#ff69b4',
+			\ 'deep pink': '#ff1493',
+			\ 'deeppink': '#ff1493',
+			\ 'pink': '#ffc0cb',
+			\ 'light pink': '#ffb6c1',
+			\ 'lightpink': '#ffb6c1',
+			\ 'pale violet red': '#db7093',
+			\ 'palevioletred': '#db7093',
+			\ 'maroon': '#b03060',
+			\ 'x11 maroon': '#b03060',
+			\ 'x11maroon': '#b03060',
+			\ 'web maroon': '#800000',
+			\ 'webmaroon': '#800000',
+			\ 'medium violet red': '#c71585',
+			\ 'mediumvioletred': '#c71585',
+			\ 'violet red': '#d02090',
+			\ 'violetred': '#d02090',
+			\ 'magenta': '#ff00ff',
+			\ 'fuchsia': '#ff00ff',
+			\ 'violet': '#ee82ee',
+			\ 'plum': '#dda0dd',
+			\ 'orchid': '#da70d6',
+			\ 'medium orchid': '#ba55d3',
+			\ 'mediumorchid': '#ba55d3',
+			\ 'dark orchid': '#9932cc',
+			\ 'darkorchid': '#9932cc',
+			\ 'dark violet': '#9400d3',
+			\ 'darkviolet': '#9400d3',
+			\ 'blue violet': '#8a2be2',
+			\ 'blueviolet': '#8a2be2',
+			\ 'purple': '#a020f0',
+			\ 'x11 purple': '#a020f0',
+			\ 'x11purple': '#a020f0',
+			\ 'web purple': '#800080',
+			\ 'webpurple': '#800080',
+			\ 'medium purple': '#9370db',
+			\ 'mediumpurple': '#9370db',
+			\ 'thistle': '#d8bfd8',
+			\ 'snow1': '#fffafa',
+			\ 'snow2': '#eee9e9',
+			\ 'snow3': '#cdc9c9',
+			\ 'snow4': '#8b8989',
+			\ 'seashell1': '#fff5ee',
+			\ 'seashell2': '#eee5de',
+			\ 'seashell3': '#cdc5bf',
+			\ 'seashell4': '#8b8682',
+			\ 'antiquewhite1': '#ffefdb',
+			\ 'antiquewhite2': '#eedfcc',
+			\ 'antiquewhite3': '#cdc0b0',
+			\ 'antiquewhite4': '#8b8378',
+			\ 'bisque1': '#ffe4c4',
+			\ 'bisque2': '#eed5b7',
+			\ 'bisque3': '#cdb79e',
+			\ 'bisque4': '#8b7d6b',
+			\ 'peachpuff1': '#ffdab9',
+			\ 'peachpuff2': '#eecbad',
+			\ 'peachpuff3': '#cdaf95',
+			\ 'peachpuff4': '#8b7765',
+			\ 'navajowhite1': '#ffdead',
+			\ 'navajowhite2': '#eecfa1',
+			\ 'navajowhite3': '#cdb38b',
+			\ 'navajowhite4': '#8b795e',
+			\ 'lemonchiffon1': '#fffacd',
+			\ 'lemonchiffon2': '#eee9bf',
+			\ 'lemonchiffon3': '#cdc9a5',
+			\ 'lemonchiffon4': '#8b8970',
+			\ 'cornsilk1': '#fff8dc',
+			\ 'cornsilk2': '#eee8cd',
+			\ 'cornsilk3': '#cdc8b1',
+			\ 'cornsilk4': '#8b8878',
+			\ 'ivory1': '#fffff0',
+			\ 'ivory2': '#eeeee0',
+			\ 'ivory3': '#cdcdc1',
+			\ 'ivory4': '#8b8b83',
+			\ 'honeydew1': '#f0fff0',
+			\ 'honeydew2': '#e0eee0',
+			\ 'honeydew3': '#c1cdc1',
+			\ 'honeydew4': '#838b83',
+			\ 'lavenderblush1': '#fff0f5',
+			\ 'lavenderblush2': '#eee0e5',
+			\ 'lavenderblush3': '#cdc1c5',
+			\ 'lavenderblush4': '#8b8386',
+			\ 'mistyrose1': '#ffe4e1',
+			\ 'mistyrose2': '#eed5d2',
+			\ 'mistyrose3': '#cdb7b5',
+			\ 'mistyrose4': '#8b7d7b',
+			\ 'azure1': '#f0ffff',
+			\ 'azure2': '#e0eeee',
+			\ 'azure3': '#c1cdcd',
+			\ 'azure4': '#838b8b',
+			\ 'slateblue1': '#836fff',
+			\ 'slateblue2': '#7a67ee',
+			\ 'slateblue3': '#6959cd',
+			\ 'slateblue4': '#473c8b',
+			\ 'royalblue1': '#4876ff',
+			\ 'royalblue2': '#436eee',
+			\ 'royalblue3': '#3a5fcd',
+			\ 'royalblue4': '#27408b',
+			\ 'blue1': '#0000ff',
+			\ 'blue2': '#0000ee',
+			\ 'blue3': '#0000cd',
+			\ 'blue4': '#00008b',
+			\ 'dodgerblue1': '#1e90ff',
+			\ 'dodgerblue2': '#1c86ee',
+			\ 'dodgerblue3': '#1874cd',
+			\ 'dodgerblue4': '#104e8b',
+			\ 'steelblue1': '#63b8ff',
+			\ 'steelblue2': '#5cacee',
+			\ 'steelblue3': '#4f94cd',
+			\ 'steelblue4': '#36648b',
+			\ 'deepskyblue1': '#00bfff',
+			\ 'deepskyblue2': '#00b2ee',
+			\ 'deepskyblue3': '#009acd',
+			\ 'deepskyblue4': '#00688b',
+			\ 'skyblue1': '#87ceff',
+			\ 'skyblue2': '#7ec0ee',
+			\ 'skyblue3': '#6ca6cd',
+			\ 'skyblue4': '#4a708b',
+			\ 'lightskyblue1': '#b0e2ff',
+			\ 'lightskyblue2': '#a4d3ee',
+			\ 'lightskyblue3': '#8db6cd',
+			\ 'lightskyblue4': '#607b8b',
+			\ 'slategray1': '#c6e2ff',
+			\ 'slategray2': '#b9d3ee',
+			\ 'slategray3': '#9fb6cd',
+			\ 'slategray4': '#6c7b8b',
+			\ 'lightsteelblue1': '#cae1ff',
+			\ 'lightsteelblue2': '#bcd2ee',
+			\ 'lightsteelblue3': '#a2b5cd',
+			\ 'lightsteelblue4': '#6e7b8b',
+			\ 'lightblue1': '#bfefff',
+			\ 'lightblue2': '#b2dfee',
+			\ 'lightblue3': '#9ac0cd',
+			\ 'lightblue4': '#68838b',
+			\ 'lightcyan1': '#e0ffff',
+			\ 'lightcyan2': '#d1eeee',
+			\ 'lightcyan3': '#b4cdcd',
+			\ 'lightcyan4': '#7a8b8b',
+			\ 'paleturquoise1': '#bbffff',
+			\ 'paleturquoise2': '#aeeeee',
+			\ 'paleturquoise3': '#96cdcd',
+			\ 'paleturquoise4': '#668b8b',
+			\ 'cadetblue1': '#98f5ff',
+			\ 'cadetblue2': '#8ee5ee',
+			\ 'cadetblue3': '#7ac5cd',
+			\ 'cadetblue4': '#53868b',
+			\ 'turquoise1': '#00f5ff',
+			\ 'turquoise2': '#00e5ee',
+			\ 'turquoise3': '#00c5cd',
+			\ 'turquoise4': '#00868b',
+			\ 'cyan1': '#00ffff',
+			\ 'cyan2': '#00eeee',
+			\ 'cyan3': '#00cdcd',
+			\ 'cyan4': '#008b8b',
+			\ 'darkslategray1': '#97ffff',
+			\ 'darkslategray2': '#8deeee',
+			\ 'darkslategray3': '#79cdcd',
+			\ 'darkslategray4': '#528b8b',
+			\ 'aquamarine1': '#7fffd4',
+			\ 'aquamarine2': '#76eec6',
+			\ 'aquamarine3': '#66cdaa',
+			\ 'aquamarine4': '#458b74',
+			\ 'darkseagreen1': '#c1ffc1',
+			\ 'darkseagreen2': '#b4eeb4',
+			\ 'darkseagreen3': '#9bcd9b',
+			\ 'darkseagreen4': '#698b69',
+			\ 'seagreen1': '#54ff9f',
+			\ 'seagreen2': '#4eee94',
+			\ 'seagreen3': '#43cd80',
+			\ 'seagreen4': '#2e8b57',
+			\ 'palegreen1': '#9aff9a',
+			\ 'palegreen2': '#90ee90',
+			\ 'palegreen3': '#7ccd7c',
+			\ 'palegreen4': '#548b54',
+			\ 'springgreen1': '#00ff7f',
+			\ 'springgreen2': '#00ee76',
+			\ 'springgreen3': '#00cd66',
+			\ 'springgreen4': '#008b45',
+			\ 'green1': '#00ff00',
+			\ 'green2': '#00ee00',
+			\ 'green3': '#00cd00',
+			\ 'green4': '#008b00',
+			\ 'chartreuse1': '#7fff00',
+			\ 'chartreuse2': '#76ee00',
+			\ 'chartreuse3': '#66cd00',
+			\ 'chartreuse4': '#458b00',
+			\ 'olivedrab1': '#c0ff3e',
+			\ 'olivedrab2': '#b3ee3a',
+			\ 'olivedrab3': '#9acd32',
+			\ 'olivedrab4': '#698b22',
+			\ 'darkolivegreen1': '#caff70',
+			\ 'darkolivegreen2': '#bcee68',
+			\ 'darkolivegreen3': '#a2cd5a',
+			\ 'darkolivegreen4': '#6e8b3d',
+			\ 'khaki1': '#fff68f',
+			\ 'khaki2': '#eee685',
+			\ 'khaki3': '#cdc673',
+			\ 'khaki4': '#8b864e',
+			\ 'lightgoldenrod1': '#ffec8b',
+			\ 'lightgoldenrod2': '#eedc82',
+			\ 'lightgoldenrod3': '#cdbe70',
+			\ 'lightgoldenrod4': '#8b814c',
+			\ 'lightyellow1': '#ffffe0',
+			\ 'lightyellow2': '#eeeed1',
+			\ 'lightyellow3': '#cdcdb4',
+			\ 'lightyellow4': '#8b8b7a',
+			\ 'yellow1': '#ffff00',
+			\ 'yellow2': '#eeee00',
+			\ 'yellow3': '#cdcd00',
+			\ 'yellow4': '#8b8b00',
+			\ 'gold1': '#ffd700',
+			\ 'gold2': '#eec900',
+			\ 'gold3': '#cdad00',
+			\ 'gold4': '#8b7500',
+			\ 'goldenrod1': '#ffc125',
+			\ 'goldenrod2': '#eeb422',
+			\ 'goldenrod3': '#cd9b1d',
+			\ 'goldenrod4': '#8b6914',
+			\ 'darkgoldenrod1': '#ffb90f',
+			\ 'darkgoldenrod2': '#eead0e',
+			\ 'darkgoldenrod3': '#cd950c',
+			\ 'darkgoldenrod4': '#8b6508',
+			\ 'rosybrown1': '#ffc1c1',
+			\ 'rosybrown2': '#eeb4b4',
+			\ 'rosybrown3': '#cd9b9b',
+			\ 'rosybrown4': '#8b6969',
+			\ 'indianred1': '#ff6a6a',
+			\ 'indianred2': '#ee6363',
+			\ 'indianred3': '#cd5555',
+			\ 'indianred4': '#8b3a3a',
+			\ 'sienna1': '#ff8247',
+			\ 'sienna2': '#ee7942',
+			\ 'sienna3': '#cd6839',
+			\ 'sienna4': '#8b4726',
+			\ 'burlywood1': '#ffd39b',
+			\ 'burlywood2': '#eec591',
+			\ 'burlywood3': '#cdaa7d',
+			\ 'burlywood4': '#8b7355',
+			\ 'wheat1': '#ffe7ba',
+			\ 'wheat2': '#eed8ae',
+			\ 'wheat3': '#cdba96',
+			\ 'wheat4': '#8b7e66',
+			\ 'tan1': '#ffa54f',
+			\ 'tan2': '#ee9a49',
+			\ 'tan3': '#cd853f',
+			\ 'tan4': '#8b5a2b',
+			\ 'chocolate1': '#ff7f24',
+			\ 'chocolate2': '#ee7621',
+			\ 'chocolate3': '#cd661d',
+			\ 'chocolate4': '#8b4513',
+			\ 'firebrick1': '#ff3030',
+			\ 'firebrick2': '#ee2c2c',
+			\ 'firebrick3': '#cd2626',
+			\ 'firebrick4': '#8b1a1a',
+			\ 'brown1': '#ff4040',
+			\ 'brown2': '#ee3b3b',
+			\ 'brown3': '#cd3333',
+			\ 'brown4': '#8b2323',
+			\ 'salmon1': '#ff8c69',
+			\ 'salmon2': '#ee8262',
+			\ 'salmon3': '#cd7054',
+			\ 'salmon4': '#8b4c39',
+			\ 'lightsalmon1': '#ffa07a',
+			\ 'lightsalmon2': '#ee9572',
+			\ 'lightsalmon3': '#cd8162',
+			\ 'lightsalmon4': '#8b5742',
+			\ 'orange1': '#ffa500',
+			\ 'orange2': '#ee9a00',
+			\ 'orange3': '#cd8500',
+			\ 'orange4': '#8b5a00',
+			\ 'darkorange1': '#ff7f00',
+			\ 'darkorange2': '#ee7600',
+			\ 'darkorange3': '#cd6600',
+			\ 'darkorange4': '#8b4500',
+			\ 'coral1': '#ff7256',
+			\ 'coral2': '#ee6a50',
+			\ 'coral3': '#cd5b45',
+			\ 'coral4': '#8b3e2f',
+			\ 'tomato1': '#ff6347',
+			\ 'tomato2': '#ee5c42',
+			\ 'tomato3': '#cd4f39',
+			\ 'tomato4': '#8b3626',
+			\ 'orangered1': '#ff4500',
+			\ 'orangered2': '#ee4000',
+			\ 'orangered3': '#cd3700',
+			\ 'orangered4': '#8b2500',
+			\ 'red1': '#ff0000',
+			\ 'red2': '#ee0000',
+			\ 'red3': '#cd0000',
+			\ 'red4': '#8b0000',
+			\ 'deeppink1': '#ff1493',
+			\ 'deeppink2': '#ee1289',
+			\ 'deeppink3': '#cd1076',
+			\ 'deeppink4': '#8b0a50',
+			\ 'hotpink1': '#ff6eb4',
+			\ 'hotpink2': '#ee6aa7',
+			\ 'hotpink3': '#cd6090',
+			\ 'hotpink4': '#8b3a62',
+			\ 'pink1': '#ffb5c5',
+			\ 'pink2': '#eea9b8',
+			\ 'pink3': '#cd919e',
+			\ 'pink4': '#8b636c',
+			\ 'lightpink1': '#ffaeb9',
+			\ 'lightpink2': '#eea2ad',
+			\ 'lightpink3': '#cd8c95',
+			\ 'lightpink4': '#8b5f65',
+			\ 'palevioletred1': '#ff82ab',
+			\ 'palevioletred2': '#ee799f',
+			\ 'palevioletred3': '#cd6889',
+			\ 'palevioletred4': '#8b475d',
+			\ 'maroon1': '#ff34b3',
+			\ 'maroon2': '#ee30a7',
+			\ 'maroon3': '#cd2990',
+			\ 'maroon4': '#8b1c62',
+			\ 'violetred1': '#ff3e96',
+			\ 'violetred2': '#ee3a8c',
+			\ 'violetred3': '#cd3278',
+			\ 'violetred4': '#8b2252',
+			\ 'magenta1': '#ff00ff',
+			\ 'magenta2': '#ee00ee',
+			\ 'magenta3': '#cd00cd',
+			\ 'magenta4': '#8b008b',
+			\ 'orchid1': '#ff83fa',
+			\ 'orchid2': '#ee7ae9',
+			\ 'orchid3': '#cd69c9',
+			\ 'orchid4': '#8b4789',
+			\ 'plum1': '#ffbbff',
+			\ 'plum2': '#eeaeee',
+			\ 'plum3': '#cd96cd',
+			\ 'plum4': '#8b668b',
+			\ 'mediumorchid1': '#e066ff',
+			\ 'mediumorchid2': '#d15fee',
+			\ 'mediumorchid3': '#b452cd',
+			\ 'mediumorchid4': '#7a378b',
+			\ 'darkorchid1': '#bf3eff',
+			\ 'darkorchid2': '#b23aee',
+			\ 'darkorchid3': '#9a32cd',
+			\ 'darkorchid4': '#68228b',
+			\ 'purple1': '#9b30ff',
+			\ 'purple2': '#912cee',
+			\ 'purple3': '#7d26cd',
+			\ 'purple4': '#551a8b',
+			\ 'mediumpurple1': '#ab82ff',
+			\ 'mediumpurple2': '#9f79ee',
+			\ 'mediumpurple3': '#8968cd',
+			\ 'mediumpurple4': '#5d478b',
+			\ 'thistle1': '#ffe1ff',
+			\ 'thistle2': '#eed2ee',
+			\ 'thistle3': '#cdb5cd',
+			\ 'thistle4': '#8b7b8b',
+			\ 'gray0': '#000000',
+			\ 'grey0': '#000000',
+			\ 'gray1': '#030303',
+			\ 'grey1': '#030303',
+			\ 'gray2': '#050505',
+			\ 'grey2': '#050505',
+			\ 'gray3': '#080808',
+			\ 'grey3': '#080808',
+			\ 'gray4': '#0a0a0a',
+			\ 'grey4': '#0a0a0a',
+			\ 'gray5': '#0d0d0d',
+			\ 'grey5': '#0d0d0d',
+			\ 'gray6': '#0f0f0f',
+			\ 'grey6': '#0f0f0f',
+			\ 'gray7': '#121212',
+			\ 'grey7': '#121212',
+			\ 'gray8': '#141414',
+			\ 'grey8': '#141414',
+			\ 'gray9': '#171717',
+			\ 'grey9': '#171717',
+			\ 'gray10': '#1a1a1a',
+			\ 'grey10': '#1a1a1a',
+			\ 'gray11': '#1c1c1c',
+			\ 'grey11': '#1c1c1c',
+			\ 'gray12': '#1f1f1f',
+			\ 'grey12': '#1f1f1f',
+			\ 'gray13': '#212121',
+			\ 'grey13': '#212121',
+			\ 'gray14': '#242424',
+			\ 'grey14': '#242424',
+			\ 'gray15': '#262626',
+			\ 'grey15': '#262626',
+			\ 'gray16': '#292929',
+			\ 'grey16': '#292929',
+			\ 'gray17': '#2b2b2b',
+			\ 'grey17': '#2b2b2b',
+			\ 'gray18': '#2e2e2e',
+			\ 'grey18': '#2e2e2e',
+			\ 'gray19': '#303030',
+			\ 'grey19': '#303030',
+			\ 'gray20': '#333333',
+			\ 'grey20': '#333333',
+			\ 'gray21': '#363636',
+			\ 'grey21': '#363636',
+			\ 'gray22': '#383838',
+			\ 'grey22': '#383838',
+			\ 'gray23': '#3b3b3b',
+			\ 'grey23': '#3b3b3b',
+			\ 'gray24': '#3d3d3d',
+			\ 'grey24': '#3d3d3d',
+			\ 'gray25': '#404040',
+			\ 'grey25': '#404040',
+			\ 'gray26': '#424242',
+			\ 'grey26': '#424242',
+			\ 'gray27': '#454545',
+			\ 'grey27': '#454545',
+			\ 'gray28': '#474747',
+			\ 'grey28': '#474747',
+			\ 'gray29': '#4a4a4a',
+			\ 'grey29': '#4a4a4a',
+			\ 'gray30': '#4d4d4d',
+			\ 'grey30': '#4d4d4d',
+			\ 'gray31': '#4f4f4f',
+			\ 'grey31': '#4f4f4f',
+			\ 'gray32': '#525252',
+			\ 'grey32': '#525252',
+			\ 'gray33': '#545454',
+			\ 'grey33': '#545454',
+			\ 'gray34': '#575757',
+			\ 'grey34': '#575757',
+			\ 'gray35': '#595959',
+			\ 'grey35': '#595959',
+			\ 'gray36': '#5c5c5c',
+			\ 'grey36': '#5c5c5c',
+			\ 'gray37': '#5e5e5e',
+			\ 'grey37': '#5e5e5e',
+			\ 'gray38': '#616161',
+			\ 'grey38': '#616161',
+			\ 'gray39': '#636363',
+			\ 'grey39': '#636363',
+			\ 'gray40': '#666666',
+			\ 'grey40': '#666666',
+			\ 'gray41': '#696969',
+			\ 'grey41': '#696969',
+			\ 'gray42': '#6b6b6b',
+			\ 'grey42': '#6b6b6b',
+			\ 'gray43': '#6e6e6e',
+			\ 'grey43': '#6e6e6e',
+			\ 'gray44': '#707070',
+			\ 'grey44': '#707070',
+			\ 'gray45': '#737373',
+			\ 'grey45': '#737373',
+			\ 'gray46': '#757575',
+			\ 'grey46': '#757575',
+			\ 'gray47': '#787878',
+			\ 'grey47': '#787878',
+			\ 'gray48': '#7a7a7a',
+			\ 'grey48': '#7a7a7a',
+			\ 'gray49': '#7d7d7d',
+			\ 'grey49': '#7d7d7d',
+			\ 'gray50': '#7f7f7f',
+			\ 'grey50': '#7f7f7f',
+			\ 'gray51': '#828282',
+			\ 'grey51': '#828282',
+			\ 'gray52': '#858585',
+			\ 'grey52': '#858585',
+			\ 'gray53': '#878787',
+			\ 'grey53': '#878787',
+			\ 'gray54': '#8a8a8a',
+			\ 'grey54': '#8a8a8a',
+			\ 'gray55': '#8c8c8c',
+			\ 'grey55': '#8c8c8c',
+			\ 'gray56': '#8f8f8f',
+			\ 'grey56': '#8f8f8f',
+			\ 'gray57': '#919191',
+			\ 'grey57': '#919191',
+			\ 'gray58': '#949494',
+			\ 'grey58': '#949494',
+			\ 'gray59': '#969696',
+			\ 'grey59': '#969696',
+			\ 'gray60': '#999999',
+			\ 'grey60': '#999999',
+			\ 'gray61': '#9c9c9c',
+			\ 'grey61': '#9c9c9c',
+			\ 'gray62': '#9e9e9e',
+			\ 'grey62': '#9e9e9e',
+			\ 'gray63': '#a1a1a1',
+			\ 'grey63': '#a1a1a1',
+			\ 'gray64': '#a3a3a3',
+			\ 'grey64': '#a3a3a3',
+			\ 'gray65': '#a6a6a6',
+			\ 'grey65': '#a6a6a6',
+			\ 'gray66': '#a8a8a8',
+			\ 'grey66': '#a8a8a8',
+			\ 'gray67': '#ababab',
+			\ 'grey67': '#ababab',
+			\ 'gray68': '#adadad',
+			\ 'grey68': '#adadad',
+			\ 'gray69': '#b0b0b0',
+			\ 'grey69': '#b0b0b0',
+			\ 'gray70': '#b3b3b3',
+			\ 'grey70': '#b3b3b3',
+			\ 'gray71': '#b5b5b5',
+			\ 'grey71': '#b5b5b5',
+			\ 'gray72': '#b8b8b8',
+			\ 'grey72': '#b8b8b8',
+			\ 'gray73': '#bababa',
+			\ 'grey73': '#bababa',
+			\ 'gray74': '#bdbdbd',
+			\ 'grey74': '#bdbdbd',
+			\ 'gray75': '#bfbfbf',
+			\ 'grey75': '#bfbfbf',
+			\ 'gray76': '#c2c2c2',
+			\ 'grey76': '#c2c2c2',
+			\ 'gray77': '#c4c4c4',
+			\ 'grey77': '#c4c4c4',
+			\ 'gray78': '#c7c7c7',
+			\ 'grey78': '#c7c7c7',
+			\ 'gray79': '#c9c9c9',
+			\ 'grey79': '#c9c9c9',
+			\ 'gray80': '#cccccc',
+			\ 'grey80': '#cccccc',
+			\ 'gray81': '#cfcfcf',
+			\ 'grey81': '#cfcfcf',
+			\ 'gray82': '#d1d1d1',
+			\ 'grey82': '#d1d1d1',
+			\ 'gray83': '#d4d4d4',
+			\ 'grey83': '#d4d4d4',
+			\ 'gray84': '#d6d6d6',
+			\ 'grey84': '#d6d6d6',
+			\ 'gray85': '#d9d9d9',
+			\ 'grey85': '#d9d9d9',
+			\ 'gray86': '#dbdbdb',
+			\ 'grey86': '#dbdbdb',
+			\ 'gray87': '#dedede',
+			\ 'grey87': '#dedede',
+			\ 'gray88': '#e0e0e0',
+			\ 'grey88': '#e0e0e0',
+			\ 'gray89': '#e3e3e3',
+			\ 'grey89': '#e3e3e3',
+			\ 'gray90': '#e5e5e5',
+			\ 'grey90': '#e5e5e5',
+			\ 'gray91': '#e8e8e8',
+			\ 'grey91': '#e8e8e8',
+			\ 'gray92': '#ebebeb',
+			\ 'grey92': '#ebebeb',
+			\ 'gray93': '#ededed',
+			\ 'grey93': '#ededed',
+			\ 'gray94': '#f0f0f0',
+			\ 'grey94': '#f0f0f0',
+			\ 'gray95': '#f2f2f2',
+			\ 'grey95': '#f2f2f2',
+			\ 'gray96': '#f5f5f5',
+			\ 'grey96': '#f5f5f5',
+			\ 'gray97': '#f7f7f7',
+			\ 'grey97': '#f7f7f7',
+			\ 'gray98': '#fafafa',
+			\ 'grey98': '#fafafa',
+			\ 'gray99': '#fcfcfc',
+			\ 'grey99': '#fcfcfc',
+			\ 'gray100': '#ffffff',
+			\ 'grey100': '#ffffff',
+			\ 'dark grey': '#a9a9a9',
+			\ 'darkgrey': '#a9a9a9',
+			\ 'dark gray': '#a9a9a9',
+			\ 'darkgray': '#a9a9a9',
+			\ 'dark blue': '#00008b',
+			\ 'darkblue': '#00008b',
+			\ 'dark cyan': '#008b8b',
+			\ 'darkcyan': '#008b8b',
+			\ 'dark magenta': '#8b008b',
+			\ 'darkmagenta': '#8b008b',
+			\ 'dark red': '#8b0000',
+			\ 'darkred': '#8b0000',
+			\ 'light green': '#90ee90',
+			\ 'lightgreen': '#90ee90',
+			\ 'crimson': '#dc143c',
+			\ 'indigo': '#4b0082',
+			\ 'olive': '#808000',
+			\ 'rebecca purple': '#663399',
+			\ 'rebeccapurple': '#663399',
+			\ 'silver': '#c0c0c0',
+			\ 'teal': '#008080'
+			\ }, 'keep')
+
+let &cpo= s:keepcpo
+unlet s:keepcpo
+
+"vim: sw=4

runtime/defaults.vim

@@ -1,7 +1,7 @@
 " The default vimrc file.
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last change:	2020 Sep 30
+" Last change:	2021 Nov 17
 "
 " This is loaded if no vimrc file was found.
 " Except when Vim is run with "-u NONE" or "-C".
@@ -96,7 +96,7 @@ if 1
   filetype plugin indent on
 
   " Put these in an autocmd group, so that you can revert them with:
-  " ":augroup vimStartup | au! | augroup END"
+  " ":augroup vimStartup | exe 'au!' | augroup END"
   augroup vimStartup
     au!
 
@@ -111,6 +111,18 @@ if 1
 
   augroup END
 
+  " Quite a few people accidentally type "q:" instead of ":q" and get confused
+  " by the command line window.  Give a hint about how to get out.
+  " If you don't like this you can put this in your vimrc:
+  " ":augroup vimHints | exe 'au!' | augroup END"
+  augroup vimHints
+    au!
+    autocmd CmdwinEnter *
+	  \ echohl Todo | 
+	  \ echo 'You discovered the command-line window! You can close it with ":q".' |
+	  \ echohl None
+  augroup END
+
 endif
 
 " Switch syntax highlighting on when the terminal has colors or when using the

runtime/doc/autocmd.txt

@@ -1,4 +1,4 @@
-*autocmd.txt*   For Vim version 8.2.  Last change: 2021 Oct 04
+*autocmd.txt*   For Vim version 8.2.  Last change: 2021 Nov 20
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -83,7 +83,7 @@ triggered.
 		}
 
 Note: The ":autocmd" command can only be followed by another command when the
-'|' appears before {cmd}.  This works: >
+'|' appears where the pattern is expected.  This works: >
 	:augroup mine | au! BufRead | augroup END
 But this sees "augroup" as part of the defined command: >
 	:augroup mine | au! BufRead * | augroup END
@@ -348,6 +348,7 @@ Name			triggered by ~
 
 |WinNew|		after creating a new window
 |TabNew|		after creating a new tab page
+|WinClosed|		after closing a window
 |TabClosed|		after closing a tab page
 |WinEnter|		after entering another window
 |WinLeave|		before leaving a window
@@ -708,7 +709,7 @@ EncodingChanged			Fires off after the 'encoding' option has been
 							*FileAppendCmd*
 FileAppendCmd			Before appending to a file.  Should do the
 				appending to the file.  Use the '[ and ']
-				marks for the range of lines.|Cmd-event|
+				marks for the range of lines. |Cmd-event|
 							*FileAppendPost*
 FileAppendPost			After appending to a file.
 							*FileAppendPre*
@@ -836,7 +837,7 @@ FilterReadPre			Before reading a file from a filter command.
 							*FilterWritePost*
 FilterWritePost			After writing a file for a filter command or
 				making a diff with an external diff (see
-				DiffUpdated for internal diff).
+				|DiffUpdated| for internal diff).
 				Vim checks the pattern against the name of
 				the current buffer as with FilterWritePre.
 				Not triggered when 'shelltemp' is off.
@@ -930,18 +931,23 @@ MenuPopup			Just before showing the popup menu (under the
 							*ModeChanged*
 ModeChanged			After changing the mode. The pattern is
 				matched against `'old_mode:new_mode'`, for
-				example match against `i:*` to simulate
-				|InsertLeave|.
+				example match against `*:c*` to simulate
+				|CmdlineEnter|.
 				The following values of |v:event| are set:
 				   old_mode	The mode before it changed.
 				   new_mode	The new mode as also returned
-						by |mode()|.
+						by |mode()| called with a
+						non-zero argument.
 				When ModeChanged is triggered, old_mode will
 				have the value of new_mode when the event was
 				last triggered.
+				This will be triggered on every minor mode
+				change.
 				Usage example to use relative line numbers
 				when entering Visual mode: >
-	:autocmd ModeChanged *:v set relativenumber
+	:au ModeChanged [vV\x16]*:* let &l:rnu = mode() =~# '^[vV\x16]'
+	:au ModeChanged *:[vV\x16]* let &l:rnu = mode() =~# '^[vV\x16]'
+	:au WinEnter,WinLeave * let &l:rnu = mode() =~# '^[vV\x16]'
 <							*OptionSet*
 OptionSet			After setting an option.  The pattern is
 				matched against the long option name.
@@ -1195,9 +1201,9 @@ TextYankPost			After text has been yanked or deleted in the
 						register, as a list of lines,
 						like with: >
 						getreg(r, 1, 1)
-<				   regname	Name of the |register| or
-						empty string for the unnamed
-						register.
+<				   regname	Name of the register or empty
+						string for the unnamed
+						register, see |registers|.
 				   regtype	Type of the register, see
 						|getregtype()|.
 				   visual	True if the operation is
@@ -1275,6 +1281,12 @@ VimResume			When the Vim instance is resumed after being
 VimSuspend			When the Vim instance is suspended.  Only when
 				CTRL-Z was typed inside Vim, not when the
 				SIGSTOP or SIGTSTP signal was sent to Vim.
+							*WinClosed*
+WinClosed			After closing a window.  The pattern is
+				matched against the |window-ID|.  Both
+				<amatch> and <afile> are set to the
+				|window-ID|.  Non-recursive (event cannot
+				trigger itself).
 							*WinEnter*
 WinEnter			After entering another window.  Not done for
 				the first window, when Vim has just started.

runtime/doc/change.txt

@@ -1184,9 +1184,6 @@ a register, a paste on a visual selected area will paste that single line on
 each of the selected lines (thus replacing the blockwise selected region by a
 block of the pasted line).
 
-Use |zP|/|zp| to paste a blockwise yanked register without appending trailing
-spaces.
-
 							*blockwise-register*
 If you use a blockwise Visual mode command to get the text into the register,
 the block of text will be inserted before ("P") or after ("p") the cursor
@@ -1197,6 +1194,9 @@ this happen.  However, if the width of the block is not a multiple of a <Tab>
 width and the text after the inserted block contains <Tab>s, that text may be
 misaligned.
 
+Use |zP|/|zp| to paste a blockwise yanked register without appending trailing
+spaces.
+
 Note that after a characterwise yank command, Vim leaves the cursor on the
 first yanked character that is closest to the start of the buffer.  This means
 that "yl" doesn't move the cursor, but "yh" moves the cursor one character

runtime/doc/cmdline.txt

@@ -803,7 +803,7 @@ three lines: >
 		3:d<CR>		is translated into: .,.+2d<CR>
 <
 
-Visual Mode and Range					
+Visual Mode and Range
 							*v_:*
 {Visual}:	Starts a command-line with the Visual selected lines as a
 		range.  The code `:'<,'>` is used for this range, which makes

runtime/doc/digraph.txt

@@ -351,8 +351,8 @@ $	DO	0x24	 36	DOLLAR SIGN
 þ	th	0xfe	254	LATIN SMALL LETTER THORN (Icelandic)
 ÿ	y:	0xff	255	LATIN SMALL LETTER Y WITH DIAERESIS
 
-If your Vim is compiled with |multibyte| support and you are using a multibyte
-'encoding', Vim provides this enhanced set of additional digraphs:
+If you are using a |multibyte| 'encoding', Vim provides this enhanced set of
+additional digraphs:
 
 							*digraph-table-mbyte*
 char  digraph	hex	dec	official name ~

runtime/doc/editing.txt

@@ -1,4 +1,4 @@
-*editing.txt*   For Vim version 8.2.  Last change: 2021 Oct 04
+*editing.txt*   For Vim version 8.2.  Last change: 2021 Oct 16
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1329,26 +1329,26 @@ present in 'cpoptions' and "!" is not used in the command.
 			other tabs and for windows in the current tab that
 			have their own window-local directory.
 
-							*:tch* *:tchdir*
-:tch[dir][!]		Same as |:tcd|.
-
 							*:tcd-*
 :tc[d][!] -		Change to the previous current directory, before the
 			last ":tcd {path}" command.
 
+							*:tch* *:tchdir*
+:tch[dir][!]		Same as |:tcd|.
+
 							*:lc* *:lcd*
 :lc[d][!] {path}	Like |:cd|, but only set the current directory when
 			the cursor is in the current window.  The current
 			directory for other windows is not changed, switching
 			to another window will stop using {path}.
 
-							*:lch* *:lchdir*
-:lch[dir][!]		Same as |:lcd|.
-
 							*:lcd-*
 :lcd[!] -		Change to the previous current directory, before the
 			last ":lcd {path}" command.
 
+							*:lch* *:lchdir*
+:lch[dir][!]		Same as |:lcd|.
+
 							*:pw* *:pwd* *E187*
 :pw[d]			Print the current directory name.
 			Also see |getcwd()|.
@@ -1375,14 +1375,14 @@ change anything for the current directory.
 When a |:lcd| command has been used for a window, the specified directory
 becomes the current directory for that window.  Windows where the |:lcd|
 command has not been used stick to the global or tab-local current directory.
-When jumping to another window the current directory will become the last
+When jumping to another window the current directory is changed to the last
 specified local current directory.  If none was specified, the global or
 tab-local current directory is used.
 
 When a |:tcd| command has been used for a tab page, the specified directory
 becomes the current directory for the current tab page and the current window.
 The current directory of other tab pages is not affected.  When jumping to
-another tab page, the current directory will become the last specified local
+another tab page, the current directory is changed to the last specified local
 directory for that tab page. If the current tab has no local current directory
 the global current directory is used.
 
@@ -1676,6 +1676,11 @@ It is also possible that you modified the file yourself, from another edit
 session or with another command (e.g., a filter command).  Then you will know
 which version of the file you want to keep.
 
+The accuracy of the time check depends on the filesystem.  On Unix it is
+usually sub-second.  With old file sytems and on MS-Windows it is normally one
+second.  Use has('nanotime') check if sub-second time stamp checks are
+available.
+
 There is one situation where you get the message while there is nothing wrong:
 On a Win32 system on the day daylight saving time starts.  There is something
 in the Win32 libraries that confuses Vim about the hour time difference.  The

runtime/doc/eval.txt

@@ -1,4 +1,4 @@
-*eval.txt*	For Vim version 8.2.  Last change: 2021 Oct 04
+*eval.txt*	For Vim version 8.2.  Last change: 2021 Nov 20
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -1840,6 +1840,43 @@ v:collate	The current locale setting for collation order of the runtime
 		command.
 		See |multi-lang|.
 
+                                                                *v:colornames*
+v:colornames    A dictionary that maps color names to hex color strings. These
+		color names can be used with the |highlight-guifg|,
+		|highlight-guibg|, and |highlight-guisp| parameters. Updating
+		an entry in v:colornames has no immediate effect on the syntax
+		highlighting. The highlight commands (probably in a
+		colorscheme script) need to be re-evaluated in order to use
+		the updated color values. For example: >
+
+		    :let v:colornames['fuscia'] = '#cf3ab4'
+		    :let v:colornames['mauve'] = '#915f6d'
+		    :highlight Normal guifg=fuscia guibg=mauve
+<
+		This cannot be used to override the |cterm-colors| but it can
+		be used to override other colors. For example, the X11 colors
+		defined in the `colors/lists/default.vim` (previously defined
+		in |rgb.txt|). When defining new color names in a plugin, the
+		recommended practice is to set a color entry only when it does
+		not already exist. For example: >
+
+		    :call extend(v:colornames, {
+			\ 'fuscia': '#cf3ab4',
+			\ 'mauve': '#915f6d,
+			\ }, 'keep')
+<
+		Using |extend()| with the 'keep' option updates each color only
+		if it did not exist in |v:colornames|. Doing so allows the
+		user to choose the precise color value for a common name
+		by setting it in their |.vimrc|.
+
+		It is possible to remove entries from this dictionary but
+		doing so is NOT recommended, because it is disruptive to
+		other scripts. It is also unlikely to achieve the desired
+		result because the |:colorscheme| and |:highlight| commands will
+		both automatically load all `colors/lists/default.vim` color
+		scripts.
+
 				*v:completed_item* *completed_item-variable*
 v:completed_item
 		|Dictionary| containing the |complete-items| for the most
@@ -2253,6 +2290,21 @@ v:shell_error	Result of the last shell command.  When non-zero, the last
 <		"shell_error" also works, for backwards compatibility, unless
 		|scriptversion| is 3 or higher.
 
+					*v:sizeofint* *sizeofint-variable*
+v:sizeofint	Number of bytes in an int.  Depends on how Vim was compiled.
+		This is only useful for deciding whether a test will give the
+		expected result.
+
+					*v:sizeoflong* *sizeoflong-variable*
+v:sizeoflong	Number of bytes in a long.  Depends on how Vim was compiled.
+		This is only useful for deciding whether a test will give the
+		expected result.
+
+				*v:sizeofpointer* *sizeofpointer-variable*
+v:sizeofpointer	Number of bytes in a pointer.  Depends on how Vim was compiled.
+		This is only useful for deciding whether a test will give the
+		expected result.
+
 					*v:statusmsg* *statusmsg-variable*
 v:statusmsg	Last given status message.  It's allowed to set this variable.
 
@@ -2549,7 +2601,7 @@ deletebufline({buf}, {first} [, {last}])
 did_filetype()			Number	|TRUE| if FileType autocmd event used
 diff_filler({lnum})		Number	diff filler lines about {lnum}
 diff_hlID({lnum}, {col})	Number	diff highlighting at {lnum}/{col}
-digraph_get({chars})		String	get the digraph of {chars}
+digraph_get({chars})		String	get the |digraph| of {chars}
 digraph_getlist([{listall}])	List	get all |digraph|s
 digraph_set({chars}, {digraph})	Boolean	register |digraph|
 digraph_setlist({digraphlist})	Boolean	register multiple |digraph|s
@@ -2681,6 +2733,8 @@ histget({history} [, {index}])	String	get the item {index} from a history
 histnr({history})		Number	highest index of a history
 hlID({name})			Number	syntax ID of highlight group {name}
 hlexists({name})		Number	|TRUE| if highlight group {name} exists
+hlget([{name} [, {resolve}]])	List	get highlight group attributes
+hlset({list})			Number	set highlight group attributes
 hostname()			String	name of the machine Vim is running on
 iconv({expr}, {from}, {to})	String	convert encoding of {expr}
 indent({lnum})			Number	indent of line {lnum}
@@ -4928,6 +4982,9 @@ flatten({list} [, {maxdepth}])					*flatten()*
 			:echo flatten([1, [2, [3, 4]], 5], 1)
 <			[1, 2, [3, 4], 5]
 
+		Can also be used as a |method|: >
+			mylist->flatten()
+<
 flattennew({list} [, {maxdepth}])			*flattennew()*
 		Like |flatten()| but first make a copy of {list}.
 
@@ -5605,7 +5662,7 @@ getcompletion({pat}, {type} [, {filtered}])		*getcompletion()*
 		buffer		buffer names
 		behave		:behave suboptions
 		color		color schemes
-		command		Ex command (and arguments)
+		command		Ex command
 		cmdline		|cmdline-completion| result
 		compiler	compilers
 		cscope		|:cscope| suboptions
@@ -5700,7 +5757,7 @@ getcursorcharpos([{winid}])
 <							*getcwd()*
 getcwd([{winnr} [, {tabnr}]])
 		The result is a String, which is the name of the current
-		working directory.
+		working directory.  'autochdir' is ignored.
 
 		With {winnr} return the local current directory of this window
 		in the current tab page.  {winnr} can be the window number or
@@ -5713,8 +5770,8 @@ getcwd([{winnr} [, {tabnr}]])
 		the working directory of the tabpage.
 		If {winnr} is zero use the current window, if {tabnr} is zero
 		use the current tabpage.
-		Without any arguments, return the working directory of the
-		current window.
+		Without any arguments, return the actual working directory of
+		the current window.
 		Return an empty string if the arguments are invalid.
 
 		Examples: >
@@ -5862,8 +5919,8 @@ getline({lnum} [, {end}])
 		digit, |line()| is called to translate the String into a Number.
 		To get the line under the cursor: >
 			getline(".")
-<		When {lnum} is smaller than 1 or bigger than the number of
-		lines in the buffer, an empty string is returned.
+<		When {lnum} is a number smaller than 1 or bigger than the
+		number of lines in the buffer, an empty string is returned.
 
 		When {end} is given the result is a |List| where each item is
 		a line from the current buffer in the range {lnum} to {end},
@@ -6325,6 +6382,9 @@ getwininfo([{winid}])					*getwininfo()*
 					otherwise
 			wincol		leftmost screen column of the window;
 					"col" from |win_screenpos()|
+			textoff		number of columns occupied by any
+					'foldcolumn', 'signcolumn' and line
+					number in front of the text
 			winid		|window-ID|
 			winnr		window number
 			winrow		topmost screen line of the window;
@@ -6679,6 +6739,108 @@ hlexists({name})					*hlexists()*
 
 		Can also be used as a |method|: >
 			GetName()->hlexists()
+<
+hlget([{name} [, {resolve}]])				*hlget()*
+		Returns a List of all the highlight group attributes.  If the
+		optional {name} is specified, then returns a List with only
+		the attributes of the specified highlight group.  Returns an
+		empty List if the highlight group {name} is not present.
+
+		If the optional {resolve} argument is set to v:true and the
+		highlight group {name} is linked to another group, then the
+		link is resolved recursively and the attributes of the
+		resolved highlight group are returned.
+
+		Each entry in the returned List is a Dictionary with the
+		following items:
+			cleared	boolean flag, set to v:true if the highlight
+				group attributes are cleared or not yet
+				specified.  See |highlight-clear|.
+			cterm	cterm attributes. See |highlight-cterm|.
+			ctermbg	cterm background color.
+				See |highlight-ctermbg|.
+			ctermfg	cterm foreground color.
+				See |highlight-ctermfg|.
+			ctermul	cterm underline color.  See |highlight-ctermul|.
+			default boolean flag, set to v:true if the highlight
+				group link is a default link. See
+				|highlight-default|.
+			font	highlight group font.  See |highlight-font|.
+			gui	gui attributes. See |highlight-gui|.
+			guibg	gui background color.  See |highlight-guibg|.
+			guifg	gui foreground color.  See |highlight-guifg|.
+			guisp	gui special color.  See |highlight-guisp|.
+			id	highlight group ID.
+			linksto	linked highlight group name.
+				See |:highlight-link|.
+			name	highlight group name. See |group-name|.
+			start	start terminal keycode.  See |highlight-start|.
+			stop	stop terminal keycode.  See |highlight-stop|.
+			term	term attributes.  See |highlight-term|.
+
+		The 'term', 'cterm' and 'gui' items in the above Dictionary
+		have a dictionary value with the following optional boolean
+		items: 'bold', 'standout', 'underline', 'undercurl', 'italic',
+		'reverse', 'inverse' and 'strikethrough'.
+
+		Example(s): >
+			:echo hlget()
+			:echo hlget('ModeMsg')
+			:echo hlget('Number', v:true)
+<
+		Can also be used as a |method|: >
+			GetName()->hlget()
+<
+hlset({list})						*hlset()*
+		Creates or modifies the attributes of a List of highlight
+		groups.  Each item in {list} is a dictionary containing the
+		attributes of a highlight group. See |hlget()| for the list of
+		supported items in this dictionary.
+
+		In addition to the items described in |hlget()|, the following
+		additional items are supported in the dictionary:
+
+			force		boolean flag to force the creation of
+					a link for an existing highlight group
+					with attributes.
+
+		The highlight group is identified using the 'name' item and
+		the 'id' item (if supplied) is ignored.  If a highlight group
+		with a specified name doesn't exist, then it is created.
+		Otherwise the attributes of an existing highlight group are
+		modified.
+
+		If an empty dictionary value is used for the 'term' or 'cterm'
+		or 'gui' entries, then the corresponding attributes are
+		cleared.  If the 'cleared' item is set to v:true, then all the
+		attributes of the highlight group are cleared.
+
+		The 'linksto' item can be used to link a highlight group to
+		another highlight group.  See |:highlight-link|.
+
+		Returns zero for success, -1 for failure.
+
+		Example(s): >
+			" add bold attribute to the Visual highlight group
+			:call hlset([#{name: 'Visual',
+					\ term: #{reverse: 1 , bold: 1}}])
+			:call hlset([#{name: 'Type', guifg: 'DarkGreen'}])
+			:let l = hlget()
+			:call hlset(l)
+			" clear the Search highlight group
+			:call hlset([#{name: 'Search', cleared: v:true}])
+			" clear the 'term' attributes for a highlight group
+			:call hlset([#{name: 'Title', term: {}}])
+			" create the MyHlg group linking it to DiffAdd
+			:call hlset([#{name: 'MyHlg', linksto: 'DiffAdd'}])
+			" remove the MyHlg group link
+			:call hlset([#{name: 'MyHlg', linksto: 'NONE'}])
+			" clear the attributes and a link
+			:call hlset([#{name: 'MyHlg', cleared: v:true,
+					\ linksto: 'NONE'}])
+<
+		Can also be used as a |method|: >
+			GetAttrList()->hlset()
 <
 							*hlID()*
 hlID({name})	The result is a Number, which is the ID of the highlight group
@@ -7646,6 +7808,7 @@ match({expr}, {pat} [, {start} [, {count}]])			*match()*
 		further down in the text.
 
 		Can also be used as a |method|: >
+			GetText()->match('word')
 			GetList()->match('word')
 <
 				*matchadd()* *E798* *E799* *E801* *E957*
@@ -7882,8 +8045,10 @@ matchlist({expr}, {pat} [, {start} [, {count}]])		*matchlist()*
 <		Results in: ['acd', 'a', '', 'c', 'd', '', '', '', '', '']
 		When there is no match an empty list is returned.
 
+		You can pass in a List, but that is not very useful.
+
 		Can also be used as a |method|: >
-			GetList()->matchlist('word')
+			GetText()->matchlist('word')
 
 matchstr({expr}, {pat} [, {start} [, {count}]])			*matchstr()*
 		Same as |match()|, but return the matched string.  Example: >
@@ -8324,15 +8489,18 @@ printf({fmt}, {expr1} ...)				*printf()*
 			field width.  If the converted value has fewer bytes
 			than the field width, it will be padded with spaces on
 			the left (or right, if the left-adjustment flag has
-			been given) to fill out the field width.
+			been given) to fill out the field width.  For the S
+			conversion the count is in cells.
 
 		.precision
 			An optional precision, in the form of a period '.'
 			followed by an optional digit string.  If the digit
 			string is omitted, the precision is taken as zero.
 			This gives the minimum number of digits to appear for
-			d, o, x, and X conversions, or the maximum number of
-			bytes to be printed from a string for s conversions.
+			d, o, x, and X conversions, the maximum number of
+			bytes to be printed from a string for s conversions,
+			or the maximum number of cells to be printed from a
+			string for S conversions.
 			For floating point it is the number of digits after
 			the decimal point.
 
@@ -9417,7 +9585,9 @@ searchcount([{options}])					*searchcount()*
 						|getpos()|
 						(default: cursor's position)
 
-
+		Can also be used as a |method|: >
+			GetSearchOpts()->searchcount()
+<
 searchdecl({name} [, {global} [, {thisblock}]])			*searchdecl()*
 		Search for the declaration of {name}.
 
@@ -9648,6 +9818,9 @@ setcellwidths({list})					*setcellwidths()*
 		range overlaps with another.
 		Only characters with value 0x100 and higher can be used.
 
+		If the new value causes 'fillchars' or 'listchars' to become
+		invalid it is rejected and an error is given.
+
 		To clear the overrides pass an empty list: >
 		   setcellwidths([]);
 <		You can use the script $VIMRUNTIME/tools/emoji_list.vim to see
@@ -10078,7 +10251,7 @@ settabwinvar({tabnr}, {winnr}, {varname}, {val})	*settabwinvar()*
 
 		Can also be used as a |method|, the base is passed as the
 		fourth argument: >
-			GetValue()->settabvar(tab, winnr, name)
+			GetValue()->settabwinvar(tab, winnr, name)
 
 settagstack({nr}, {dict} [, {action}])			*settagstack()*
 		Modify the tag stack of the window {nr} using {dict}.
@@ -10335,6 +10508,10 @@ sort({list} [, {func} [, {dict}]])			*sort()* *E702*
 <
 sound_clear()						*sound_clear()*
 		Stop playing all sounds.
+
+		On some Linux systems you may need the libcanberra-pulse
+		package, otherwise sound may not stop.
+
 		{only available when compiled with the |+sound| feature}
 
 							*sound_playevent()*
@@ -10387,6 +10564,9 @@ sound_stop({id})					*sound_stop()*
 		Stop playing sound {id}.  {id} must be previously returned by
 		`sound_playevent()` or `sound_playfile()`.
 
+		On some Linux systems you may need the libcanberra-pulse
+		package, otherwise sound may not stop.
+
 		On MS-Windows, this does not work for event sound started by
 		`sound_playevent()`. To stop event sounds, use `sound_clear()`.
 
@@ -10826,10 +11006,12 @@ strptime({format}, {timestring})				*strptime()*
 		  :echo strftime("%c", strptime("%Y%m%d%H%M%S", "19970427115355") + 3600)
 <		  Sun Apr 27 12:53:55 1997
 
+		Can also be used as a |method|: >
+			GetFormat()->strptime(timestring)
+<
 		Not available on all systems.  To check use: >
 			:if exists("*strptime")
 
-
 strridx({haystack}, {needle} [, {start}])			*strridx()*
 		The result is a Number, which gives the byte index in
 		{haystack} of the last occurrence of the String {needle}.
@@ -11098,10 +11280,10 @@ synstack({lnum}, {col})					*synstack()*
 		valid positions.
 
 system({expr} [, {input}])				*system()* *E677*
-		Get the output of the shell command {expr} as a string.  See
+		Get the output of the shell command {expr} as a |String|.  See
 		|systemlist()| to get the output as a |List|.
 
-		When {input} is given and is a string this string is written
+		When {input} is given and is a |String| this string is written
 		to a file and passed as stdin to the command.  The string is
 		written as-is, you need to take care of using the correct line
 		separators yourself.
@@ -11724,9 +11906,9 @@ wildmenumode()					*wildmenumode()*
 win_execute({id}, {command} [, {silent}])		*win_execute()*
 		Like `execute()` but in the context of window {id}.
 		The window will temporarily be made the current window,
-		without triggering autocommands.  When executing {command}
-		autocommands will be triggered, this may have unexpected side
-		effects.  Use |:noautocmd| if needed.
+		without triggering autocommands or changing directory.  When
+		executing {command} autocommands will be triggered, this may
+		have unexpected side effects.  Use |:noautocmd| if needed.
 		Example: >
 			call win_execute(winid, 'set syntax=python')
 <		Doing the same with `setwinvar()` would not trigger
@@ -11781,7 +11963,9 @@ win_gettype([{nr}])					*win_gettype()*
 		popup window then 'buftype' is "terminal" and win_gettype()
 		returns "popup".
 
-
+		Can also be used as a |method|: >
+			GetWinid()->win_gettype()
+<
 win_gotoid({expr})					*win_gotoid()*
 		Go to window with ID {expr}.  This may also change the current
 		tabpage.
@@ -12236,6 +12420,7 @@ multi_byte_encoding	'encoding' is set to a multibyte encoding.
 multi_byte_ime		Compiled with support for IME input method.
 multi_lang		Compiled with support for multiple languages.
 mzscheme		Compiled with MzScheme interface |mzscheme|.
+nanotime		Compiled with sub-second time stamp checks.
 netbeans_enabled	Compiled with support for |netbeans| and connected.
 netbeans_intg		Compiled with support for |netbeans|.
 num64			Compiled with 64-bit |Number| support.

runtime/doc/gui_w32.txt

@@ -1,4 +1,4 @@
-*gui_w32.txt*   For Vim version 8.2.  Last change: 2021 Apr 05
+*gui_w32.txt*   For Vim version 8.2.  Last change: 2021 Oct 24
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -323,20 +323,10 @@ These extra colors are also available:
 Gray, Grey, LightYellow, SeaGreen, Orange, Purple, SlateBlue, Violet,
 
 								*rgb.txt*
-Additionally, colors defined by a "rgb.txt" file can be used.  This file is
-well known from X11.  A few lines from it: >
-
-  255 218 185		   peach puff
-  205 133  63		   peru
-  255 181 197		   pink
-
-This shows the layout of the file:  First the R, G and B value as a decimal
-number, followed by the name of the color.  The four fields are separated by
-spaces.
-
-You can get an rgb.txt file from any X11 distribution.  It is located in a
-directory like "/usr/X11R6/lib/X11/".  For Vim it must be located in the
-$VIMRUNTIME directory.  Thus the file can be found with "$VIMRUNTIME/rgb.txt".
+Additionally, colors defined by a default color list can be used.  For more
+info see |:colorscheme|.  These colors used to be defined in
+$VIMRUNTIME/rgb.txt, now they are in |v:colornames| which is initialized from
+$VIMRUNTIME/colors/lists/default.vim.
 
 ==============================================================================
 						*gui-w32-dialogs* *dialog*

runtime/doc/help.txt

@@ -88,6 +88,7 @@ Tuning Vim ~
 |usr_43.txt|  Using filetypes
 |usr_44.txt|  Your own syntax highlighted
 |usr_45.txt|  Select your language
+|usr_46.txt|  Write plugins using Vim9 script
 
 Making Vim Run ~
 |usr_90.txt|  Installing Vim

runtime/doc/helphelp.txt

@@ -1,4 +1,4 @@
-*helphelp.txt*	For Vim version 8.2.  Last change: 2020 Dec 29
+*helphelp.txt*	For Vim version 8.2.  Last change: 2021 Nov 18
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -323,21 +323,25 @@ Hints for translators:
 3. Writing help files					*help-writing*
 
 For ease of use, a Vim help file for a plugin should follow the format of the
-standard Vim help files.  If you are writing a new help file it's best to copy
-one of the existing files and use it as a template.
+standard Vim help files, except for the first line.  If you are writing a new
+help file it's best to copy one of the existing files and use it as a
+template.
 
 The first line in a help file should have the following format:
 
-*helpfile_name.txt*	For Vim version 7.3	Last change: 2010 June 4
+*plugin_name.txt*	{short description of the plugin}
 
-The first field is a link to the help file name.  The second field describes
-the applicable Vim version.  The last field specifies the last modification
-date of the file.  Each field is separated by a tab.
+The first field is a help tag where ":help plugin_name" will jump to.  The
+remainder of the line, after a Tab, describes the plugin purpose in a short
+way.  This will show up in the "LOCAL ADDITIONS" section of the main help
+file.  Check there that it shows up properly: |local-additions|.
+
+If you want to add a version number or last modification date, put it in the
+second line, right aligned.
 
 At the bottom of the help file, place a Vim modeline to set the 'textwidth'
 and 'tabstop' options and the 'filetype' to "help".  Never set a global option
-in such a modeline, that can have consequences undesired by whoever reads that
-help.
+in such a modeline, that can have undesired consequences.
 
 
 TAGS

runtime/doc/if_pyth.txt

@@ -1,4 +1,4 @@
-*if_pyth.txt*   For Vim version 8.2.  Last change: 2019 Dec 07
+*if_pyth.txt*   For Vim version 8.2.  Last change: 2021 Nov 12
 
 
 		  VIM REFERENCE MANUAL    by Paul Moore
@@ -63,6 +63,11 @@ To see what version of Python you have: >
 
 There is no need to import sys, it's done by default.
 
+							*python-environment*
+Environment variables set in Vim are not always available in Python.  This
+depends on how Vim and Python were build.  Also see
+https://docs.python.org/3/library/os.html#os.environ
+
 Note: Python is very sensitive to the indenting.  Make sure the "class" line
 and "EOF" do not have any indent.
 

runtime/doc/indent.txt

@@ -608,26 +608,25 @@ CLOJURE					*ft-clojure-indent* *clojure-indent*
 Clojure indentation differs somewhat from traditional Lisps, due in part to
 the use of square and curly brackets, and otherwise by community convention.
 These conventions are not universally followed, so the Clojure indent script
-offers a few configurable options, listed below.
+offers a few configuration options.
+
+(If the current Vim does not include |searchpairpos()|, the indent script falls
+back to normal 'lisp' indenting, and the following options are ignored.)
 
-If the current vim does not include searchpairpos(), the indent script falls
-back to normal 'lisp' indenting, and the following options are ignored.
 
 							*g:clojure_maxlines*
 
-Set maximum scan distance of searchpairpos(). Larger values trade performance
-for correctness when dealing with very long forms. A value of 0 will scan
-without limits.
->
-	" Default
-	let g:clojure_maxlines = 100
-<
+Sets maximum scan distance of `searchpairpos()`.  Larger values trade
+performance for correctness when dealing with very long forms.  A value of
+0 will scan without limits.  The default is 300.
+
+
 						*g:clojure_fuzzy_indent*
 					*g:clojure_fuzzy_indent_patterns*
 					*g:clojure_fuzzy_indent_blacklist*
 
 The 'lispwords' option is a list of comma-separated words that mark special
-forms whose subforms must be indented with two spaces.
+forms whose subforms should be indented with two spaces.
 
 For example:
 >
@@ -645,15 +644,11 @@ the fuzzy indent feature:
 	let g:clojure_fuzzy_indent_patterns = ['^with', '^def', '^let']
 	let g:clojure_fuzzy_indent_blacklist =
 		\ ['-fn$', '\v^with-%(meta|out-str|loading-context)$']
-
-	" Legacy comma-delimited string version; the list format above is
-	" recommended. Note that patterns are implicitly anchored with ^ and $
-	let g:clojure_fuzzy_indent_patterns = 'with.*,def.*,let.*'
 <
 |g:clojure_fuzzy_indent_patterns| and |g:clojure_fuzzy_indent_blacklist| are
-|Lists| of patterns that will be matched against the unquoted, unqualified
-symbol at the head of a list. This means that a pattern like "^foo" will match
-all these candidates: "foobar", "my.ns/foobar", and "#'foobar".
+lists of patterns that will be matched against the unqualified symbol at the
+head of a list.  This means that a pattern like `"^foo"` will match all these
+candidates: `foobar`, `my.ns/foobar`, and `#'foobar`.
 
 Each candidate word is tested for special treatment in this order:
 
@@ -664,20 +659,22 @@ Each candidate word is tested for special treatment in this order:
 	   |g:clojure_fuzzy_indent_patterns|
 	4. Return false and indent normally otherwise
 
+
 					*g:clojure_special_indent_words*
 
-Some forms in Clojure are indented so that every subform is indented only two
-spaces, regardless of 'lispwords'. If you have a custom construct that should
-be indented in this idiosyncratic fashion, you can add your symbols to the
-default list below.
+Some forms in Clojure are indented such that every subform is indented by only
+two spaces, regardless of 'lispwords'.  If you have a custom construct that
+should be indented in this idiosyncratic fashion, you can add your symbols to
+the default list below.
 >
 	" Default
 	let g:clojure_special_indent_words =
 	   \ 'deftype,defrecord,reify,proxy,extend-type,extend-protocol,letfn'
 <
+
 					*g:clojure_align_multiline_strings*
 
-Align subsequent lines in multiline strings to the column after the opening
+Align subsequent lines in multi-line strings to the column after the opening
 quote, instead of the same column.
 
 For example:
@@ -694,11 +691,7 @@ For example:
 	   enim ad minim veniam, quis nostrud exercitation ullamco laboris
 	   nisi ut aliquip ex ea commodo consequat.")
 <
-This option is off by default.
->
-	" Default
-	let g:clojure_align_multiline_strings = 0
-<
+
 						*g:clojure_align_subforms*
 
 By default, parenthesized compound forms that look like function calls and
@@ -709,18 +702,14 @@ two spaces relative to the opening paren:
 	  bar
 	  baz)
 <
-Setting this option changes this behavior so that all subforms are aligned to
-the same column, emulating the default behavior of clojure-mode.el:
+Setting this option to `1` changes this behaviour so that all subforms are
+aligned to the same column, emulating the default behaviour of
+clojure-mode.el:
 >
 	(foo
 	 bar
 	 baz)
 <
-This option is off by default.
->
-	" Default
-	let g:clojure_align_subforms = 0
-<
 
 FORTRAN							*ft-fortran-indent*
 

runtime/doc/insert.txt

@@ -1,4 +1,4 @@
-*insert.txt*    For Vim version 8.2.  Last change: 2021 Aug 31
+*insert.txt*    For Vim version 8.2.  Last change: 2021 Oct 24
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -824,6 +824,9 @@ CTRL-X CTRL-K		Search the files given with the 'dictionary' option
 	CTRL-P		Search backwards for next matching keyword.  This
 			keyword replaces the previous matching keyword.
 
+
+Completing words in 'thesaurus'				*compl-thesaurus*
+
 							*i_CTRL-X_CTRL-T*
 CTRL-X CTRL-T		Works as CTRL-X CTRL-K, but in a special way.  It uses
 			the 'thesaurus' option instead of 'dictionary'.  If a
@@ -832,16 +835,6 @@ CTRL-X CTRL-T		Works as CTRL-X CTRL-K, but in a special way.  It uses
 			matches, even though they don't complete the word.
 			Thus a word can be completely replaced.
 
-			For an example, imagine the 'thesaurus' file has a
-			line like this: >
-				angry furious mad enraged
-<			Placing the cursor after the letters "ang" and typing
-			CTRL-X CTRL-T would complete the word "angry";
-			subsequent presses would change the word to "furious",
-			"mad" etc.
-			Other uses include translation between two languages,
-			or grouping API functions by keyword.
-
 	CTRL-T	or
 	CTRL-N		Search forward for next matching keyword.  This
 			keyword replaces the previous matching keyword.
@@ -849,6 +842,57 @@ CTRL-X CTRL-T		Works as CTRL-X CTRL-K, but in a special way.  It uses
 	CTRL-P		Search backwards for next matching keyword.  This
 			keyword replaces the previous matching keyword.
 
+In the file used by the 'thesaurus' option each line in the file should
+contain words with similar meaning, separated by non-keyword characters (white
+space is preferred).  Maximum line length is 510 bytes.
+
+For an example, imagine the 'thesaurus' file has a line like this: >
+	angry furious mad enraged
+<Placing the cursor after the letters "ang" and typing CTRL-X CTRL-T would
+complete the word "angry"; subsequent presses would change the word to
+"furious", "mad" etc.
+
+Other uses include translation between two languages, or grouping API
+functions by keyword.
+
+An English word list was added to this github issue:
+https://github.com/vim/vim/issues/629#issuecomment-443293282
+Unpack thesaurus_pkg.zip, put the thesaurus.txt file somewhere, e.g.
+~/.vim/thesaurus/english.txt, and the 'thesaurus' option to this file name.
+
+					
+Completing keywords with 'thesaurusfunc'		*compl-thesaurusfunc*
+
+If the 'thesaurusfunc' option is set, then the user specified function is
+invoked to get the list of completion matches and the 'thesaurus' option is
+not used. See |complete-functions| for an explanation of how the function is
+invoked and what it should return.
+
+Here is an example that uses the "aiksaurus" command (provided by Magnus
+Groß): >
+
+    func Thesaur(findstart, base)
+      if a:findstart
+    	return searchpos('\<', 'bnW', line('.'))[1] - 1
+      endif
+      let res = []
+      let h = ''
+      for l in systemlist('aiksaurus '.shellescape(a:base))
+	if l[:3] == '=== '
+	  let h = '('.substitute(l[4:], ' =*$', ')', '')
+	elseif l ==# 'Alphabetically similar known words are: '
+	  let h = "\U0001f52e"
+	elseif l[0] =~ '\a' || (h ==# "\U0001f52e" && l[0] ==# "\t")
+	  call extend(res, map(split(substitute(l, '^\t', '', ''), ', '), {_, val -> {'word': val, 'menu': h}}))
+	endif
+      endfor
+      return res
+    endfunc
+    
+    if exists('+thesaurusfunc')
+      set thesaurusfunc=Thesaur
+    endif
+
 
 Completing keywords in the current and included files	*compl-keyword*
 
@@ -1052,7 +1096,7 @@ CTRL-X CTRL-Z		Stop completion without changing the text.
 
 FUNCTIONS FOR FINDING COMPLETIONS			*complete-functions*
 
-This applies to 'completefunc' and 'omnifunc'.
+This applies to 'completefunc', 'thesaurusfunc' and 'omnifunc'.
 
 The function is called in two different ways:
 - First the function is called to find the start of the text to be completed.

runtime/doc/map.txt

@@ -1,4 +1,4 @@
-*map.txt*       For Vim version 8.2.  Last change: 2021 Sep 12
+*map.txt*       For Vim version 8.2.  Last change: 2021 Nov 20
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -61,6 +61,8 @@ modes.
 			where the map command applies.  The result, including
 			{rhs}, is then further scanned for mappings.  This
 			allows for nested and recursive use of mappings.
+			Note: Trailing spaces are included in the {rhs},
+			because space is a valid Normal mode command.
 
 						*:nore* *:norem*
 :no[remap]  {lhs} {rhs}		|mapmode-nvo|	*:no*  *:noremap* *:nor*
@@ -94,6 +96,9 @@ modes.
 			Remove the mapping of {lhs} for the modes where the
 			map command applies.  The mapping may remain defined
 			for other modes where it applies.
+			It also works when {lhs} matches the {rhs} of a
+			mapping. This is for when when an abbreviation
+			applied.
 			Note: Trailing spaces are included in the {lhs}.  This
 			unmap does NOT work: >
 				:map @@ foo
@@ -344,6 +349,8 @@ Note:
 - For the same reason, |keycodes| like <C-R><C-W> are interpreted as plain,
   unmapped keys.
 - The command is not echo'ed, no need for <silent>.
+- The {rhs} is not subject to abbreviations nor to other mappings, even if the
+  mapping is recursive.
 - In Visual mode  you can use `line('v')` and `col('v')` to get one end of the
   Visual area, the cursor is at the other end.
 - In Select mode, |:map| and |:vmap| command mappings are executed in
@@ -1004,6 +1011,20 @@ Also note that the 'clipboard' option is temporarily emptied to avoid
 clobbering the `"*` or `"+` registers, if its value contains the item `unnamed`
 or `unnamedplus`.
 
+The `mode()` function will return the state as it will be after applying the
+operator.
+
+Here is an example for using a lambda function to create a normal-mode
+operator to add quotes around text in the current line: >
+
+	nnoremap <F4> <Cmd>let &opfunc='{t ->
+				\ getline(".")
+				\ ->split("\\zs")
+				\ ->insert("\"", col("'']"))
+				\ ->insert("\"", col("''[") - 1)
+				\ ->join("")
+				\ ->setline(".")}'<CR>g@
+
 ==============================================================================
 2. Abbreviations			*abbreviations* *Abbreviations*
 
@@ -1557,6 +1578,7 @@ Possible values are (second column is the short name used in listing):
 Special cases ~
 					*:command-bang* *:command-bar*
 					*:command-register* *:command-buffer*
+					*:command-keepscript*
 There are some special cases as well:
 
 	-bang	    The command can take a ! modifier (like :q or :w)
@@ -1566,6 +1588,9 @@ There are some special cases as well:
 	-register   The first argument to the command can be an optional
 		    register name (like :del, :put, :yank).
 	-buffer	    The command will only be available in the current buffer.
+	-keepscript Do not use the location of where the user command was
+		    defined for verbose messages, use the location of where
+		    the user command was invoked.
 
 In the cases of the -count and -register attributes, if the optional argument
 is supplied, it is removed from the argument list and is available to the

runtime/doc/message.txt

@@ -141,6 +141,11 @@ larger.  When it's more there probably is an endless loop.  Probably a
 The color name {name} is unknown.  See |gui-colors| for a list of colors that
 are available on most systems.
 
+							*E1244*  >
+  Bad color string: {str}
+
+The provided color did not conform to the pattern #rrggbb
+
 							*E458*  >
   Cannot allocate colormap entry, some colors may be incorrect
 

runtime/doc/options.txt

@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 8.2.  Last change: 2021 Sep 21
+*options.txt*	For Vim version 8.2.  Last change: 2021 Nov 18
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -371,6 +371,17 @@ Note: In the future more global options can be made global-local.  Using
 ":setlocal" on a global option might work differently then.
 
 
+						*option-value-function*
+Some options ('completefunc', 'imactivatefunc', 'imstatusfunc', 'omnifunc',
+'operatorfunc', 'quickfixtextfunc' and 'tagfunc') are set to a function name
+or a function reference or a lambda function.  Examples:
+>
+	set opfunc=MyOpFunc
+	set opfunc=function('MyOpFunc')
+	set opfunc=funcref('MyOpFunc')
+	let &opfunc = "{t -> MyOpFunc(t)}"
+<
+
 Setting the filetype
 
 :setf[iletype] [FALLBACK] {filetype}			*:setf* *:setfiletype*
@@ -717,7 +728,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	"double":	Use twice the width of ASCII characters.
 							*E834* *E835*
 	The value "double" cannot be used if 'listchars' or 'fillchars'
-	contains a character that would be double width.
+	contains a character that would be double width.  These errors may
+	also be given when calling setcellwidths().
 
 	The values are overruled for characters specified with
 	|setcellwidths()|.
@@ -1419,6 +1431,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Also see |win_gettype()|, which returns the type of the window.
 
 	Be careful with changing this option, it can have many side effects!
+	One such effect is that Vim will not check the timestamp of the file,
+	if the file is changed by another program this will not be noticed.
 
 	A "quickfix" buffer is only used for the error list and the location
 	list.  This value is set by the |:cwindow| and |:lwindow| commands and
@@ -2410,7 +2424,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	   xchacha20	XChaCha20 Cipher with Poly1305 Message Authentication
 			Code.  Medium strong till strong encryption.
 			Encryption is provided by the libsodium library, it
-			requires Vim to be built with |+sodium|
+			requires Vim to be built with |+sodium|.
 			It adds a seed and a message authentication code (MAC)
 			to the file.  This needs at least a Vim 8.2.3022 to
 			read the encrypted file.
@@ -3610,8 +3624,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	systems without an fsync() implementation, this variable is always
 	off.
 	Also see 'swapsync' for controlling fsync() on swap files.
-	'fsync' also applies to |writefile()|, unless a flag is used to
-	overrule it.
+	'fsync' also applies to |writefile()| (unless a flag is used to
+	overrule it) and when writing undo files (see |undo-persistence|).
 	This option cannot be set from a |modeline| or in the |sandbox|, for
 	security reasons.
 
@@ -3790,6 +3804,18 @@ A jump table for the options with a short description can be found at |Q_op|.
 	screen.  Set it to a negative value to allow windows taller than the
 	screen.
 
+						*'guiligatures'* *'gli'* *E1243*
+'guiligatures' 'gli'	string	(default "")
+			global
+			{only for GTK GUI}
+	List of ASCII characters that, when combined together, can create more
+	complex shapes. Each character must be a printable ASCII character
+	with a value in the 32-127 range.
+	Example: >
+		:set guiligatures=!\"#$%&()*+-./:<=>?@[]^_{\|~
+<	Changing this option updates screen output immediately. Set it to an
+	empty string to disable ligatures.
+
 						*'guioptions'* *'go'*
 'guioptions' 'go'	string	(default "egmrLtT"   (MS-Windows,
 					   "t" is removed in |defaults.vim|),
@@ -4893,9 +4919,10 @@ A jump table for the options with a short description can be found at |Q_op|.
 						*'list'* *'nolist'*
 'list'			boolean	(default off)
 			local to window
-	List mode: Show tabs as CTRL-I is displayed, display $ after end of
-	line.  Useful to see the difference between tabs and spaces and for
-	trailing blanks.  Further changed by the 'listchars' option.
+	List mode: By default show tabs as CTRL-I is displayed, display $
+	after end of line.  Useful to see the difference between tabs and
+	spaces and for trailing blanks.  Further changed by the 'listchars'
+	option.
 
 	The cursor is displayed at the start of the space a Tab character
 	occupies, not at the end as usual in Normal mode.  To get this cursor
@@ -4978,6 +5005,13 @@ A jump table for the options with a short description can be found at |Q_op|.
 	be used when 'encoding' is "utf-8", otherwise only printable
 	characters are allowed.  All characters must be single width.
 
+	Each character can be specified as hex: >
+		set listchars=eol:\\x24
+		set listchars=eol:\\u21b5
+		set listchars=eol:\\U000021b5
+<	Note that a double backslash is used.  The number of hex characters
+	must be exactly 2 for \\x, 4 for \\u and 8 for \\U.
+
 	Examples: >
 	    :set lcs=tab:>-,trail:-
 	    :set lcs=tab:>-,eol:<,nbsp:%
@@ -5600,7 +5634,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 'operatorfunc' 'opfunc'	string	(default: empty)
 			global
 	This option specifies a function to be called by the |g@| operator.
-	See |:map-operator| for more info and an example.
+	See |:map-operator| for more info and an example.  The value can be
+	the name of a function, a |lambda| or a |Funcref|. See
+	|option-value-function| for more information.
 
 	This option cannot be set from a |modeline| or in the |sandbox|, for
 	security reasons.
@@ -6000,8 +6036,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	customize the information displayed in the quickfix or location window
 	for each entry in the corresponding quickfix or location list.  See
 	|quickfix-window-function| for an explanation of how to write the
-	function and an example. The value can be the name of a function or a
-	lambda.
+	function and an example.  The value can be the name of a function, a
+	|lambda| or a |Funcref|. See |option-value-function| for more
+	information.
 
 	This option cannot be set from a |modeline| or in the |sandbox|, for
 	security reasons.
@@ -7406,13 +7443,13 @@ A jump table for the options with a short description can be found at |Q_op|.
 	      return value of expr contains % items they will get expanded.
 	      The expression can contain the } character, the end of
 	      expression is denoted by %}.
-	      The For example: >
+	      For example: >
 		func! Stl_filename() abort
 		    return "%t"
 		endfunc
 <	        `stl=%{Stl_filename()}`   results in `"%t"`
 	        `stl=%{%Stl_filename()%}` results in `"Name of current file"`
-	} -   End of `{%` expression
+	%} -  End of `{%` expression
 	( -   Start of item group.  Can be used for setting the width and
 	      alignment of a section.  Must be followed by %) somewhere.
 	) -   End of item group.  No width fields allowed.
@@ -7755,7 +7792,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	This option specifies a function to be used to perform tag searches.
 	The function gets the tag pattern and should return a List of matching
 	tags.  See |tag-function| for an explanation of how to write the
-	function and an example.
+	function and an example.  The value can be the name of a function, a
+	|lambda| or a |Funcref|. See |option-value-function| for more
+	information.
 
 						*'taglength'* *'tl'*
 'taglength' 'tl'	number	(default 0)
@@ -7918,6 +7957,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Number of scrollback lines to keep.  When going over this limit the
 	first 10% of the scrollback lines are deleted.  This is just to reduce
 	the memory usage.  See |Terminal-Normal|.
+	Also used as a limit for text sent to the terminal in one write,
+	multiplied by the number of columns times 3 (average number of bytes
+	per cell).
 
 						*'termwinsize'* *'tws'*
 'termwinsize' 'tws'	string	(default "")
@@ -8008,25 +8050,30 @@ A jump table for the options with a short description can be found at |Q_op|.
 'thesaurus' 'tsr'	string	(default "")
 			global or local to buffer |global-local|
 	List of file names, separated by commas, that are used to lookup words
-	for thesaurus completion commands |i_CTRL-X_CTRL-T|.
+	for thesaurus completion commands |i_CTRL-X_CTRL-T|.  See
+	|compl-thesaurus|.
 
-	Each line in the file should contain words with similar meaning,
-	separated by non-keyword characters (white space is preferred).
-	Maximum line length is 510 bytes.
-
-	An English word list was added to this github issue:
-	https://github.com/vim/vim/issues/629#issuecomment-443293282
-	Unpack thesaurus_pkg.zip, put the thesaurus.txt file somewhere, e.g.
-	~/.vim/thesaurus/english.txt, and the 'thesaurus' option to this file
-	name.
+	This option is not used if 'thesaurusfunc' is set, either for the
+	buffer or globally.
 
 	To include a comma in a file name precede it with a backslash.  Spaces
 	after a comma are ignored, otherwise spaces are included in the file
-	name.  See |option-backslash| about using backslashes.
-	The use of |:set+=| and |:set-=| is preferred when adding or removing
-	directories from the list.  This avoids problems when a future version
-	uses another default.
-	Backticks cannot be used in this option for security reasons.
+	name.  See |option-backslash| about using backslashes.  The use of
+	|:set+=| and |:set-=| is preferred when adding or removing directories
+	from the list.  This avoids problems when a future version uses
+	another default.  Backticks cannot be used in this option for security
+	reasons.
+
+						*'thesaurusfunc'* *tsrfu'*
+'thesaurusfunc' 'tsrfu'	string	(default: empty)
+			global or local to buffer |global-local|
+			{not available when compiled without the |+eval|
+			feature}
+	This option specifies a function to be used for thesaurus completion
+	with CTRL-X CTRL-T. |i_CTRL-X_CTRL-T| See |compl-thesaurusfunc|.
+
+	This option cannot be set from a |modeline| or in the |sandbox|, for
+	security reasons.
 
 			     *'tildeop'* *'top'* *'notildeop'* *'notop'*
 'tildeop' 'top'		boolean	(default off)

runtime/doc/os_haiku.txt

@@ -194,9 +194,8 @@ $VIM/macros/swapmous.vim for an example.		|gui-mouse-mapping|
 
 11. Color names						*haiku-colors*
 
-Vim has a number of color names built-in.  Additional names are read from the
-file $VIMRUNTIME/rgb.txt, if present.  This file is basically the color
-database from X.  Names used from this file are cached for efficiency.
+Vim has a number of color names built-in. Additional names can be defined in
+|v:colornames|. See |:colorscheme| for details.
 
 
 12. GUI Toolbar Images					*haiku-toolbar-images*

runtime/doc/pattern.txt

@@ -932,7 +932,7 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 \%.l    Matches at the cursor line.
 \%<.l   Matches above the cursor line.
 \%>.l   Matches below the cursor line.
-	These three can be used to match specific lines in a buffer.  The "23"
+	These six can be used to match specific lines in a buffer.  The "23"
 	can be any line number.  The first line is 1.
 	WARNING: When inserting or deleting lines Vim does not automatically
 	update the matches.  This means Syntax highlighting quickly becomes
@@ -953,16 +953,15 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 \%.c    Matches at the cursor column.
 \%<.c   Matches before the cursor column.
 \%>.c   Matches after the cursor column.
-	These three can be used to match specific columns in a buffer or
-	string.  The "23" can be any column number.  The first column is 1.
-	Actually, the column is the byte number (thus it's not exactly right
-	for multibyte characters).
+	These six can be used to match specific columns in a buffer or string.
+	The "23" can be any column number.  The first column is 1.  Actually,
+	the column is the byte number (thus it's not exactly right for
+	multibyte characters).
 	WARNING: When inserting or deleting text Vim does not automatically
 	update the matches.  This means Syntax highlighting quickly becomes
 	wrong.  Also when referring to the cursor position (".") and
 	the cursor moves the display isn't updated for this change.  An update
 	is done when using the |CTRL-L| command (the whole screen is updated).
-
 	Example, to highlight the column where the cursor currently is: >
 		:exe '/\%' . col(".") . 'c'
 <	Alternatively use: >
@@ -980,8 +979,8 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 \%.v    Matches at the current virtual column.
 \%<.v   Matches before the current virtual column.
 \%>.v   Matches after the current virtual column.
-	These three can be used to match specific virtual columns in a buffer
-	or string.  When not matching with a buffer in a window, the option
+	These six can be used to match specific virtual columns in a buffer or
+	string.  When not matching with a buffer in a window, the option
 	values of the current window are used (e.g., 'tabstop').
 	The "23" can be any column number.  The first column is 1.
 	Note that some virtual column positions will never match, because they
@@ -1012,7 +1011,7 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 		/.*\%17v
 <	Column 17 is highlighted by 'hlsearch' because there is another match
 	where ".*" matches zero characters.
-<
+
 
 Character classes:
 \i	identifier character (see 'isident' option)	*/\i*

runtime/doc/pi_zip.txt

@@ -1,4 +1,4 @@
-*pi_zip.txt*	For Vim version 8.2.  Last change: 2020 Jan 07
+*pi_zip.txt*	For Vim version 8.2.  Last change: 2021 Nov 08
 
 				+====================+
 				| Zip File Interface |
@@ -102,6 +102,9 @@ Copyright: Copyright (C) 2005-2015 Charles E Campbell	 *zip-copyright*
 
 ==============================================================================
 4. History							*zip-history* {{{1
+   v32 Oct 22, 2021 * to avoid an issue with a vim 8.2 patch, zipfile: has
+   		      been changed to zipfile:// . This often shows up
+		      as zipfile:/// with zipped files that are root-based.
    v29 Apr 02, 2017 * (Klartext) reported that an encrypted zip file could
    		      opened but the swapfile held unencrypted contents.
 		      The solution is to edit the contents of a zip file

runtime/doc/quickref.txt

@@ -1,4 +1,4 @@
-*quickref.txt*  For Vim version 8.2.  Last change: 2021 Mar 29
+*quickref.txt*  For Vim version 8.2.  Last change: 2021 Oct 17
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -732,6 +732,7 @@ Short explanation of each option:		*option-list*
 'guifontset'	  'gfs'     GUI: Names of multibyte fonts to be used
 'guifontwide'	  'gfw'     list of font names for double-wide characters
 'guiheadroom'	  'ghr'     GUI: pixels room for window decorations
+'guiligatures'	  'gli'	    GTK GUI: ASCII characters that can form shapes
 'guioptions'	  'go'	    GUI: Which components and options are used
 'guipty'		    GUI: try to use a pseudo-tty for ":!" commands
 'guitablabel'	  'gtl'     GUI: custom label for a tab page
@@ -948,6 +949,7 @@ Short explanation of each option:		*option-list*
 'textmode'	  'tx'	    obsolete, use 'fileformat'
 'textwidth'	  'tw'	    maximum width of text that is being inserted
 'thesaurus'	  'tsr'     list of thesaurus files for keyword completion
+'thesaurusfunc'	  'tsrfu'   function to be used for thesaurus completion
 'tildeop'	  'top'     tilde command "~" behaves like an operator
 'timeout'	  'to'	    time out on mappings and key codes
 'timeoutlen'	  'tm'	    time out time in milliseconds

runtime/doc/sign.txt

@@ -53,6 +53,8 @@ The color of the column is set with the SignColumn highlight group
 
 	:highlight SignColumn guibg=darkgrey
 <
+If 'cursorline' is enabled, then the CursorLineSign highlight group is used
+|hl-CursorLineSign|.
 							*sign-identifier*
 Each placed sign is identified by a number called the sign identifier. This
 identifier is used to jump to the sign or to remove the sign. The identifier
@@ -171,6 +173,13 @@ See |sign_getdefined()| for the equivalent Vim script function.
 :sign list {name}
 		Lists one defined sign and its attributes.
 
+	culhl={group}
+		Highlighting group used for the text item when the cursor is
+		on the same line as the sign and 'cursorline' is enabled.
+
+	Example: >
+		:sign define MySign text=>> texthl=Search linehl=DiffText
+<
 
 PLACING SIGNS						*:sign-place* *E158*
 
@@ -393,6 +402,9 @@ sign_define({list})
 		   text		text that is displayed when there is no icon
 				or the GUI is not being used.
 		   texthl	highlight group used for the text item
+		   culhl	highlight group used for the text item when
+				the cursor is on the same line as the sign and
+				'cursorline' is enabled.
 
 		If the sign named {name} already exists, then the attributes
 		of the sign are updated.
@@ -437,6 +449,9 @@ sign_getdefined([{name}])				*sign_getdefined()*
 		   text		text that is displayed when there is no icon
 				or the GUI is not being used.
 		   texthl	highlight group used for the text item
+		   culhl	highlight group used for the text item when
+				the cursor is on the same line as the sign and
+				'cursorline' is enabled.
 
 		Returns an empty List if there are no signs and when {name} is
 		not found.

runtime/doc/syntax.txt

@@ -1,4 +1,4 @@
-*syntax.txt*	For Vim version 8.2.  Last change: 2021 Aug 16
+*syntax.txt*	For Vim version 8.2.  Last change: 2021 Nov 20
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -1081,33 +1081,47 @@ This works immediately.
 
 CLOJURE							*ft-clojure-syntax*
 
-The default syntax groups can be augmented through the
-*g:clojure_syntax_keywords* and *b:clojure_syntax_keywords* variables. The
-value should be a |Dictionary| of syntax group names to a |List| of custom
-identifiers:
+						*g:clojure_syntax_keywords*
+
+Syntax highlighting of public vars in "clojure.core" is provided by default,
+but additional symbols can be highlighted by adding them to the
+|g:clojure_syntax_keywords| variable.  The value should be a |Dictionary| of
+syntax group names, each containing a |List| of identifiers.
 >
 	let g:clojure_syntax_keywords = {
-	    \ 'clojureMacro': ["defproject", "defcustom"],
-	    \ 'clojureFunc': ["string/join", "string/replace"]
+	    \   'clojureMacro': ["defproject", "defcustom"],
+	    \   'clojureFunc': ["string/join", "string/replace"]
 	    \ }
 <
 Refer to the Clojure syntax script for valid syntax group names.
 
-If the |buffer-variable| *b:clojure_syntax_without_core_keywords* is set, only
-language constants and special forms are matched.
+There is also *b:clojure_syntax_keywords* which is a buffer-local variant of
+this variable intended for use by plugin authors to highlight symbols
+dynamically.
 
-Setting *g:clojure_fold* enables folding Clojure code via the syntax engine.
-Any list, vector, or map that extends over more than one line can be folded
-using the standard Vim |fold-commands|.
+By setting the *b:clojure_syntax_without_core_keywords* variable, vars from
+"clojure.core" will not be highlighted by default.  This is useful for
+namespaces that have set `(:refer-clojure :only [])`
 
-Please note that this option does not work with scripts that redefine the
-bracket syntax regions, such as rainbow-parentheses plugins.
 
-This option is off by default.
+							*g:clojure_fold*
+
+Setting |g:clojure_fold| to `1` will enable the folding of Clojure code.  Any
+list, vector or map that extends over more than one line can be folded using
+the standard Vim |fold-commands|.
+
+
+						*g:clojure_discard_macro*
+
+Set this variable to `1` to enable basic highlighting of Clojure's "discard
+reader macro".
 >
-	" Default
-	let g:clojure_fold = 0
+	#_(defn foo [x]
+	    (println x))
 <
+Note that this option will not correctly highlight stacked discard macros
+(e.g. `#_#_`).
+
 
 COBOL						*cobol.vim* *ft-cobol-syntax*
 
@@ -1673,16 +1687,6 @@ as Fvwm2 configuration files, add the following: >
   :au! BufNewFile,BufRead /etc/X11/fvwm2/*  let b:fvwm_version = 2 |
 					 \ set filetype=fvwm
 
-If you'd like Vim to highlight all valid color names, tell it where to
-find the color database (rgb.txt) on your system.  Do this by setting
-"rgb_file" to its location.  Assuming your color database is located
-in /usr/X11/lib/X11/, you should add the line >
-
-	:let rgb_file = "/usr/X11/lib/X11/rgb.txt"
-
-to your .vimrc file.
-
-
 GSP						*gsp.vim* *ft-gsp-syntax*
 
 The default coloring style for GSP pages is defined by |html.vim|, and
@@ -4830,16 +4834,28 @@ in their own color.
 			Doesn't work recursively, thus you can't use
 			":colorscheme" in a color scheme script.
 
-			To customize a color scheme use another name, e.g.
+			You have two options for customizing a color scheme.
+			For changing the appearance of specific colors, you
+			can redefine a color name before loading the scheme.
+			The desert scheme uses the khaki color for the cursor.
+			To use a darker variation of the same color: >
+
+				let v:colornames['khaki'] = '#bdb76b'
+				colorscheme desert
+<
+			For further customization, such as changing
+			|:highlight-link| associations, use another name, e.g.
 			"~/.vim/colors/mine.vim", and use `:runtime` to load
 			the original color scheme: >
 				runtime colors/evening.vim
 				hi Statement ctermfg=Blue guifg=Blue
 
-<			Before the color scheme will be loaded the
-			|ColorSchemePre| autocommand event is triggered.
-			After the color scheme has been loaded the
-			|ColorScheme| autocommand event is triggered.
+<			Before the color scheme will be loaded all default
+			color list scripts (`colors/lists/default.vim`) will
+			be executed and then the |ColorSchemePre| autocommand
+			event is triggered.  After the color scheme has been
+			loaded the |ColorScheme| autocommand event is
+			triggered.
 			For info about writing a color scheme file: >
 				:edit $VIMRUNTIME/colors/README.txt
 
@@ -4849,6 +4865,7 @@ in their own color.
 :hi[ghlight] {group-name}
 			List one highlight group.
 
+						*highlight-clear*
 :hi[ghlight] clear	Reset all highlighting to the defaults.  Removes all
 			highlighting for groups added by the user!
 			Uses the current value of 'background' to decide which
@@ -4862,7 +4879,9 @@ in their own color.
 
 :hi[ghlight] [default] {group-name} {key}={arg} ..
 			Add a highlight group, or change the highlighting for
-			an existing group.
+			an existing group. If a given color name is not
+			recognized, each `colors/lists/default.vim` found on
+			|'runtimepath'| will be loaded.
 			See |highlight-args| for the {key}={arg} arguments.
 			See |:highlight-default| for the optional [default]
 			argument.
@@ -5143,8 +5162,35 @@ guisp={color-name}					*highlight-guisp*
 		"gg"	is the Green value
 		"bb"	is the Blue value
 	All values are hexadecimal, range from "00" to "ff".  Examples: >
-  :highlight Comment guifg=#11f0c3 guibg=#ff00ff
+            :highlight Comment guifg=#11f0c3 guibg=#ff00ff
 <
+	If you are authoring a color scheme and use the same hexademical value
+	repeatedly, you can define a name for it in |v:colornames|. For
+	example: >
+
+	    # provide a default value for this color but allow the user to
+	    # override it.
+	    :call extend(v:colornames, {'alt_turquoise': '#11f0c3'}, 'keep')
+	    :highlight Comment guifg=alt_turquoise guibg=magenta
+<
+	If you are using a color scheme that relies on named colors and you
+	would like to adjust the precise appearance of those colors, you can
+	do so by overriding the values in |v:colornames| prior to loading the
+	scheme: >
+
+	    let v:colornames['alt_turquoise'] = '#22f0d3'
+	    colorscheme alt
+<
+	If you want to develop a color list that can be relied on by others,
+	it is best to prefix your color names. By convention these color lists
+	are placed in the colors/lists directory. You can see an example in
+	'$VIMRUNTIME/colors/lists/csscolors.vim'. This list would be sourced
+	by a color scheme using: >
+
+	    :runtime colors/lists/csscolors.vim
+	    :highlight Comment guifg=css_turquoise
+<
+
 					*highlight-groups* *highlight-default*
 These are the default highlighting groups.  These groups are used by the
 'highlight' option default.  Note that the highlighting depends on the value
@@ -5205,6 +5251,10 @@ LineNrBelow	Line number for when the 'relativenumber'
 							*hl-CursorLineNr*
 CursorLineNr	Like LineNr when 'cursorline' is set and 'cursorlineopt'
 		contains "number" or is "both", for the cursor line.
+							*hl-CursorLineSign*
+CursorLineSign	Like SignColumn when 'cursorline' is set for the cursor line.
+							*hl-CursorLineFold*
+CursorLineFold	Like FoldColumn when 'cursorline' is set for the cursor line.
 							*hl-MatchParen*
 MatchParen	The character under the cursor or just before it, if it
 		is a paired bracket, and its match. |pi_paren.txt|
@@ -5431,7 +5481,7 @@ For Unix you can use the file ~/.vim/after/syntax/syncolor.vim.  Example: >
 	else
 	  highlight comment ctermfg=green guifg=green
 	endif
-
+<
 								*E679*
 Do make sure this syncolor.vim script does not use a "syntax on", set the
 'background' option or uses a "colorscheme" command, because it results in an
@@ -5444,11 +5494,11 @@ depends on the color scheme file.  See |:colorscheme|.
 							*syntax_cmd*
 The "syntax_cmd" variable is set to one of these values when the
 syntax/syncolor.vim files are loaded:
-   "on"		":syntax on" command.  Highlight colors are overruled but
+   "on"		`:syntax on` command.  Highlight colors are overruled but
 		links are kept
-   "enable"	":syntax enable" command.  Only define colors for groups that
-		don't have highlighting yet.  Use ":syntax default".
-   "reset"	":syntax reset" command or loading a color scheme.  Define all
+   "enable"	`:syntax enable` command.  Only define colors for groups that
+		don't have highlighting yet.  Use `:highlight default` .
+   "reset"	`:syntax reset` command or loading a color scheme.  Define all
 		the colors.
    "skip"	Don't define colors.  Used to skip the default settings when a
 		syncolor.vim file earlier in 'runtimepath' has already set

runtime/doc/tags

@@ -302,6 +302,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'gfs'	options.txt	/*'gfs'*
 'gfw'	options.txt	/*'gfw'*
 'ghr'	options.txt	/*'ghr'*
+'gli'	options.txt	/*'gli'*
 'go'	options.txt	/*'go'*
 'go-!'	options.txt	/*'go-!'*
 'go-A'	options.txt	/*'go-A'*
@@ -339,6 +340,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'guifontset'	options.txt	/*'guifontset'*
 'guifontwide'	options.txt	/*'guifontwide'*
 'guiheadroom'	options.txt	/*'guiheadroom'*
+'guiligatures'	options.txt	/*'guiligatures'*
 'guioptions'	options.txt	/*'guioptions'*
 'guipty'	options.txt	/*'guipty'*
 'guitablabel'	options.txt	/*'guitablabel'*
@@ -1138,6 +1140,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'tgc'	options.txt	/*'tgc'*
 'tgst'	options.txt	/*'tgst'*
 'thesaurus'	options.txt	/*'thesaurus'*
+'thesaurusfunc'	options.txt	/*'thesaurusfunc'*
 'tildeop'	options.txt	/*'tildeop'*
 'timeout'	options.txt	/*'timeout'*
 'timeoutlen'	options.txt	/*'timeoutlen'*
@@ -2077,6 +2080,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :XMLent	insert.txt	/*:XMLent*
 :XMLns	insert.txt	/*:XMLns*
 :[range]	motion.txt	/*:[range]*
+:[vV\x16]	autocmd.txt	/*:[vV\\x16]*
 :\bar	cmdline.txt	/*:\\bar*
 :_!	cmdline.txt	/*:_!*
 :_#	cmdline.txt	/*:_#*
@@ -2303,6 +2307,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :command-completion-custom	map.txt	/*:command-completion-custom*
 :command-completion-customlist	map.txt	/*:command-completion-customlist*
 :command-count	map.txt	/*:command-count*
+:command-keepscript	map.txt	/*:command-keepscript*
 :command-modifiers	map.txt	/*:command-modifiers*
 :command-nargs	map.txt	/*:command-nargs*
 :command-range	map.txt	/*:command-range*
@@ -3992,6 +3997,8 @@ E1233	eval.txt	/*E1233*
 E1237	map.txt	/*E1237*
 E1239	eval.txt	/*E1239*
 E124	eval.txt	/*E124*
+E1243	options.txt	/*E1243*
+E1244	message.txt	/*E1244*
 E125	eval.txt	/*E125*
 E126	eval.txt	/*E126*
 E127	eval.txt	/*E127*
@@ -5236,6 +5243,7 @@ WORD	motion.txt	/*WORD*
 WWW	intro.txt	/*WWW*
 Win32	os_win32.txt	/*Win32*
 WinBar	gui.txt	/*WinBar*
+WinClosed	autocmd.txt	/*WinClosed*
 WinEnter	autocmd.txt	/*WinEnter*
 WinLeave	autocmd.txt	/*WinLeave*
 WinNew	autocmd.txt	/*WinNew*
@@ -5930,6 +5938,8 @@ compl-omni-filetypes	insert.txt	/*compl-omni-filetypes*
 compl-spelling	insert.txt	/*compl-spelling*
 compl-stop	insert.txt	/*compl-stop*
 compl-tag	insert.txt	/*compl-tag*
+compl-thesaurus	insert.txt	/*compl-thesaurus*
+compl-thesaurusfunc	insert.txt	/*compl-thesaurusfunc*
 compl-vim	insert.txt	/*compl-vim*
 compl-whole-line	insert.txt	/*compl-whole-line*
 complete()	eval.txt	/*complete()*
@@ -6784,6 +6794,7 @@ g:ada_with_gnat_project_files	ft_ada.txt	/*g:ada_with_gnat_project_files*
 g:ada_withuse_ordinary	ft_ada.txt	/*g:ada_withuse_ordinary*
 g:clojure_align_multiline_strings	indent.txt	/*g:clojure_align_multiline_strings*
 g:clojure_align_subforms	indent.txt	/*g:clojure_align_subforms*
+g:clojure_discard_macro	syntax.txt	/*g:clojure_discard_macro*
 g:clojure_fold	syntax.txt	/*g:clojure_fold*
 g:clojure_fuzzy_indent	indent.txt	/*g:clojure_fuzzy_indent*
 g:clojure_fuzzy_indent_blacklist	indent.txt	/*g:clojure_fuzzy_indent_blacklist*
@@ -7263,7 +7274,6 @@ help-translated	helphelp.txt	/*help-translated*
 help-writing	helphelp.txt	/*help-writing*
 help-xterm-window	helphelp.txt	/*help-xterm-window*
 help.txt	help.txt	/*help.txt*
-helpfile_name.txt	helphelp.txt	/*helpfile_name.txt*
 helphelp	helphelp.txt	/*helphelp*
 helphelp.txt	helphelp.txt	/*helphelp.txt*
 hex-editing	tips.txt	/*hex-editing*
@@ -7275,6 +7285,7 @@ hidden-options	options.txt	/*hidden-options*
 hidden-quit	windows.txt	/*hidden-quit*
 highlight-args	syntax.txt	/*highlight-args*
 highlight-changed	version4.txt	/*highlight-changed*
+highlight-clear	syntax.txt	/*highlight-clear*
 highlight-cterm	syntax.txt	/*highlight-cterm*
 highlight-ctermbg	syntax.txt	/*highlight-ctermbg*
 highlight-ctermfg	syntax.txt	/*highlight-ctermfg*
@@ -7368,7 +7379,9 @@ hl-debugBreakpoint	terminal.txt	/*hl-debugBreakpoint*
 hl-debugPC	terminal.txt	/*hl-debugPC*
 hlID()	eval.txt	/*hlID()*
 hlexists()	eval.txt	/*hlexists()*
+hlget()	eval.txt	/*hlget()*
 hlsearch-variable	eval.txt	/*hlsearch-variable*
+hlset()	eval.txt	/*hlset()*
 holy-grail	index.txt	/*holy-grail*
 home	intro.txt	/*home*
 home-replace	editing.txt	/*home-replace*
@@ -8408,6 +8421,7 @@ operator-variable	eval.txt	/*operator-variable*
 option-backslash	options.txt	/*option-backslash*
 option-list	quickref.txt	/*option-list*
 option-summary	options.txt	/*option-summary*
+option-value-function	options.txt	/*option-value-function*
 option-window	options.txt	/*option-window*
 option_restore()	todo.txt	/*option_restore()*
 option_save()	todo.txt	/*option_save()*
@@ -8530,6 +8544,7 @@ plugin	usr_05.txt	/*plugin*
 plugin-details	filetype.txt	/*plugin-details*
 plugin-filetype	usr_41.txt	/*plugin-filetype*
 plugin-special	usr_41.txt	/*plugin-special*
+plugin_name.txt	helphelp.txt	/*plugin_name.txt*
 pmbcs-option	print.txt	/*pmbcs-option*
 pmbfn-option	print.txt	/*pmbfn-option*
 popt-option	print.txt	/*popt-option*
@@ -8682,6 +8697,7 @@ python-command	if_pyth.txt	/*python-command*
 python-commands	if_pyth.txt	/*python-commands*
 python-current	if_pyth.txt	/*python-current*
 python-dynamic	if_pyth.txt	/*python-dynamic*
+python-environment	if_pyth.txt	/*python-environment*
 python-error	if_pyth.txt	/*python-error*
 python-eval	if_pyth.txt	/*python-eval*
 python-examples	if_pyth.txt	/*python-examples*
@@ -8928,6 +8944,7 @@ save-file	editing.txt	/*save-file*
 save-settings	starting.txt	/*save-settings*
 scheme.vim	syntax.txt	/*scheme.vim*
 scp	pi_netrw.txt	/*scp*
+scratch-buffer	windows.txt	/*scratch-buffer*
 screenattr()	eval.txt	/*screenattr()*
 screenchar()	eval.txt	/*screenchar()*
 screenchars()	eval.txt	/*screenchars()*
@@ -9055,6 +9072,9 @@ simulated-command	vi_diff.txt	/*simulated-command*
 sin()	eval.txt	/*sin()*
 single-repeat	repeat.txt	/*single-repeat*
 sinh()	eval.txt	/*sinh()*
+sizeofint-variable	eval.txt	/*sizeofint-variable*
+sizeoflong-variable	eval.txt	/*sizeoflong-variable*
+sizeofpointer-variable	eval.txt	/*sizeofpointer-variable*
 skeleton	autocmd.txt	/*skeleton*
 skip_defaults_vim	starting.txt	/*skip_defaults_vim*
 slice	eval.txt	/*slice*
@@ -9826,6 +9846,7 @@ try-echoerr	eval.txt	/*try-echoerr*
 try-finally	eval.txt	/*try-finally*
 try-nested	eval.txt	/*try-nested*
 try-nesting	eval.txt	/*try-nesting*
+tsrfu'	options.txt	/*tsrfu'*
 tutor	usr_01.txt	/*tutor*
 twice	if_cscop.txt	/*twice*
 two-engines	pattern.txt	/*two-engines*
@@ -9930,6 +9951,7 @@ v:charconvert_to	eval.txt	/*v:charconvert_to*
 v:cmdarg	eval.txt	/*v:cmdarg*
 v:cmdbang	eval.txt	/*v:cmdbang*
 v:collate	eval.txt	/*v:collate*
+v:colornames	eval.txt	/*v:colornames*
 v:completed_item	eval.txt	/*v:completed_item*
 v:count	eval.txt	/*v:count*
 v:count1	eval.txt	/*v:count1*
@@ -9985,6 +10007,9 @@ v:scrollstart	eval.txt	/*v:scrollstart*
 v:searchforward	eval.txt	/*v:searchforward*
 v:servername	eval.txt	/*v:servername*
 v:shell_error	eval.txt	/*v:shell_error*
+v:sizeofint	eval.txt	/*v:sizeofint*
+v:sizeoflong	eval.txt	/*v:sizeoflong*
+v:sizeofpointer	eval.txt	/*v:sizeofpointer*
 v:statusmsg	eval.txt	/*v:statusmsg*
 v:swapchoice	eval.txt	/*v:swapchoice*
 v:swapcommand	eval.txt	/*v:swapcommand*

runtime/doc/terminal.txt

@@ -1,4 +1,4 @@
-*terminal.txt*	For Vim version 8.2.  Last change: 2021 Aug 15
+*terminal.txt*	For Vim version 8.2.  Last change: 2021 Nov 13
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -168,9 +168,6 @@ terminal window will start with a white or black background.
 To use a different color the Terminal highlight group can be used, for
 example: >
     hi Terminal ctermbg=lightgrey ctermfg=blue guibg=lightgrey guifg=blue
-The highlight needs to be defined before the terminal is created.  Doing it
-later, or setting 'wincolor', will only have effect when the program running
-in the terminal displays text or clears the terminal.
 Instead of Terminal another group can be specified with the "term_highlight"
 option for `term_start()`.
 
@@ -243,7 +240,7 @@ Command syntax ~
 			++shell		Instead of executing {command}
 					directly, use a shell, like with
 					`:!command` 		*E279*
-					{only works on Unix currently}
+					{only works on Unix and MS-Windows}
 			++kill={how}	When trying to close the terminal
 					window kill the job with {how}.  See
 					|term_setkill()| for the values.
@@ -874,7 +871,8 @@ term_start({cmd} [, {options}])			*term_start()*
 		   "term_name"	     name to use for the buffer name, instead
 				     of the command name.
 		   "term_rows"	     vertical size to use for the terminal,
-				     instead of using 'termwinsize'
+				     instead of using 'termwinsize'; valid
+				     range is from zero to 1000
 		   "term_cols"	     horizontal size to use for the terminal,
 				     instead of using 'termwinsize'
 		   "vertical"	     split the window vertically; note that

runtime/doc/testing.txt

@@ -85,14 +85,14 @@ test_getvalue({name})					*test_getvalue()*
 test_gui_drop_files({list}, {row}, {col}, {mods})
 		Drop one or more files in {list} in the window at {row}, {col}.
 		This function only works when the GUI is running and the
-		|drag-n-drop| feature is present.
-		
+		|drop_file| feature is present.
+
 		The supported values for {mods} are:
 			0x4	Shift
 			0x8	Alt
 			0x10	Ctrl
-		The files are added to the argument list and the first file in
-		{list} is edited in the window.  See |drag-n-drop| for more
+		The files are added to the |argument-list| and the first file
+		in {list} is edited in the window.  See |drag-n-drop| for more
 		information.
 
 						*test_gui_mouse_event()*

runtime/doc/textprop.txt

@@ -1,4 +1,4 @@
-*textprop.txt*  For Vim version 8.2.  Last change: 2021 Aug 16
+*textprop.txt*  For Vim version 8.2.  Last change: 2021 Nov 23
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -230,13 +230,25 @@ prop_find({props} [, {direction}])
 
 
 prop_list({lnum} [, {props}])				*prop_list()*
-		Return a List with all text properties in line {lnum}.
+		Returns a List with all the text properties in line {lnum}.
 
-		When {props} contains a "bufnr" item, use this buffer instead
-		of the current buffer.
+		The following optional items are supported in {props}:
+		   bufnr	use this buffer instead of the current buffer
+		   end_lnum	return text properties in all the lines
+				between {lnum} and {end_lnum} (inclusive).
+				A negative value is used as an offset from the
+				last buffer line; -1 refers to the last buffer
+				line.
+		   types	List of property type names. Return only text
+				properties that match one of the type names.
+		   ids		List of property identifiers. Return only text
+				properties with one of these identifiers.
 
 		The properties are ordered by starting column and priority.
 		Each property is a Dict with these entries:
+		   lnum		starting line number. Present only when
+				returning text properties between {lnum} and
+				{end_lnum}.
 		   col		starting column
 		   length	length in bytes, one more if line break is
 				included
@@ -253,6 +265,30 @@ prop_list({lnum} [, {props}])				*prop_list()*
 		When "end" is zero the property continues in the next line.
 		The line break after this line is included.
 
+		Returns an empty list on error.
+
+		Examples:
+		   " get text properties placed in line 5
+		   echo prop_list(5)
+		   " get text properties placed in line 20 in buffer 4
+		   echo prop_list(20, {'bufnr': 4})
+		   " get all the text properties between line 1 and 20
+		   echo prop_list(1, {'end_lnum': 20})
+		   " get all the text properties of type 'myprop'
+		   echo prop_list(1, {'types': ['myprop'],
+						\ 'end_lnum': -1})
+		   " get all the text properties of type 'prop1' or 'prop2'
+		   echo prop_list(1, {'types': ['prop1', 'prop2'],
+						\ 'end_lnum': -1})
+		   " get all the text properties with ID 8
+		   echo prop_list(1, {'ids': [8], 'end_lnum': line('$')})
+		   " get all the text properties with ID 10 and 20
+		   echo prop_list(1, {'ids': [10, 20], 'end_lnum': -1})
+		   " get text properties with type 'myprop' and ID 100
+		   " in buffer 4.
+		   echo prop_list(1, {'bufnr': 4, 'types': ['myprop'],
+					\ 'ids': [100], 'end_lnum': -1})
+
 		Can also be used as a |method|: >
 			GetLnum()->prop_list()
 <

runtime/doc/tips.txt

@@ -1,4 +1,4 @@
-*tips.txt*      For Vim version 8.2.  Last change: 2020 Dec 29
+*tips.txt*      For Vim version 8.2.  Last change: 2021 Nov 06
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -549,6 +549,7 @@ the current window, try this custom `:HelpCurwin` command:
 	  endif
 	  if !getcompletion(a:subject, 'help')->empty()
 	    execute mods .. ' edit ' .. &helpfile
+	    set buftype=help
 	  endif
 	  return 'help ' .. a:subject
 	endfunction

runtime/doc/todo.txt

@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 8.2.  Last change: 2021 Sep 22
+*todo.txt*      For Vim version 8.2.  Last change: 2021 Nov 14
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -38,12 +38,15 @@ browser use: https://github.com/vim/vim/issues/1234
 							*known-bugs*
 -------------------- Known bugs and current work -----------------------
 
-Flaky test op Windows:
-From test_vim9_script.vim:
-    Found errors in Test_no_unknown_error_after_error():
-    command line..script D:/a/vim/vim/src2/testdir/runtest.vim[486]..function RunTheTest[44]..Test_no_unknown_error_after_error line 22: Expected 'E1012:' but got 'E684: list index out of range: 0': so Xdef
+mark ends up on last byte of char. (#9047)
+
+Delete runtime/rgb.txt after a while
 
 Vim9 - Make everything work:
+- "filter #pat# ls" should work, #pat# is not a comment
+    vim9script
+    edit foobar
+    filter #foobar# ls
 - Check TODO items in vim9compile.c and vim9execute.c
 - use CheckLegacyAndVim9Success(lines) in many more places
 - For builtin functions using tv_get_string*() use check_for_string() to be
@@ -272,12 +275,16 @@ Was originally written by Felipe Morales.
 Request to use "." for the cursor column in search pattern \%<.c and \%<.v.
 (#8179)
 
+Remove SPACE_IN_FILENAME ? It is only used for completion.
+
+When 'term' starts with "foot" then default t_TI and t_TE to the values used
+for the builtin xterm termcap.
+
 Adding "10" to 'spellsuggest' causes spell suggestions to become very slow.
 (#4087)  Did patch 8.2.2379 help?
 Also, z= in German on a long word can take a very long time, but CTRL-C to
 interrupt does not work. Where to add ui_breakcheck()?
-
-Remove SPACE_IN_FILENAME ? It is only used for completion.
+New English spell files also have very slow suggestions.
 
 Searching for \%'> does not find anything when using line Visual selection.
 Probably because it's using MAXCOL.  #8238
@@ -629,36 +636,31 @@ Window size changes after closing a tab. (#4741)
 
 Problem with colors in terminal window. (Jason Franklin, 2019 May 12)
 
-Lifepillar: Updated/cleaned up color schemes:
-https://github.com/lifepillar/vim8-colorschemes.
-
-Include a few color schemes, based on popularity:
-http://www.vim.org/scripts/script_search_results.php?keywords=&script_type=color+scheme&order_by=rating&direction=descending&search=search
+Color schemes:
+NOTE: modernizing the default colorschemes _AND_ introducing new ones is now
+a project in its own right: https://github.com/vim/colorschemes. Feel free to
+reach out if you want to lend a hand.
+- Lifepillar: Updated/cleaned up color schemes:
+  https://github.com/lifepillar/vim8-colorschemes.
+- Include a few color schemes, based on popularity:
+  - http://www.vim.org/scripts/script_search_results.php?keywords=&script_type=color+scheme&order_by=rating&direction=descending&search=search
 http://vimawesome.com/?q=tag:color-scheme
-Use names that indicate their appearance (Christian Brabandt, 2017 Aug 3)
-- monokai - Xia Crusoe (2017 Aug 4)
-- seoul256 - Christian Brabandt (2017 Aug 3)
-- gruvbox -  Christian Brabandt (2017 Aug 3) (simplified version from
-      Lifepillar, 2018 Jan 22, #2573)
-- janah - Marco Hinz (2017 Aug 4)
-- apprentice - Romain Lafourcade (2017 Aug 6)  remarks about help file #1964
-Suggested by Hiroki Kokubun:
-- [Iceberg](https://github.com/cocopon/iceberg.vim) (my one)
-- [hybrid](https://github.com/w0ng/vim-hybrid)
-Include solarized color scheme?, it does not support termguicolors.
-- Sanitized version of pablo (Lifepillar, 2017 Nov 21)
+- Use names that indicate their appearance (Christian Brabandt, 2017 Aug 3)
+  - monokai - Xia Crusoe (2017 Aug 4)
+  - seoul256 - Christian Brabandt (2017 Aug 3)
+  - gruvbox -  Christian Brabandt (2017 Aug 3) (simplified version from
+        Lifepillar, 2018 Jan 22, #2573)
+  - janah - Marco Hinz (2017 Aug 4)
+  - apprentice - Romain Lafourcade (2017 Aug 6)  remarks about help file #1964
+- Suggested by Hiroki Kokubun:
+  - [Iceberg](https://github.com/cocopon/iceberg.vim) (my one)
+  - [hybrid](https://github.com/w0ng/vim-hybrid)
+- Include solarized color scheme?, it does not support termguicolors.
+  - Sanitized version of pablo (Lifepillar, 2017 Nov 21)
 
 Bug: "vipgw" does not put cursor back where it belongs. (Jason Franklin, 2019
 Mar 5)
 
-Many users don't like 'thesaurus' to match so many words. (#4667, #1611)
-- when the match with the first word is partial, don't add other words on that
-  line.
-- support other file formats, such as comma separated.  Indicate by a prefix
-  to the file in the 'thesaurus' option.
-- 'threglookexp' option: only match with first word in thesaurus file.
-  (Jakson A. Aquino, 2006 Jun 14)
-
 Some composing characters actually add a cell width to the character they are
 on top off, making the whole thing two characters wide. (#4526)
 
@@ -4159,6 +4161,9 @@ Printing:
 
 
 Syntax highlighting:
+    Long term goal: faster, better, etc.  Options:
+    - use treesitter, NeoVim uses it
+    - use TextMate, vscode uses it.  #9087
 8   Make ":syn off" use 'runtimepath' instead of $VIMRUNTIME. (Gary Johnson)
     Should do the same for ":syn on" and ":syn manual".
 8   Support "containedin" argument for ":syn include", so that the defined

runtime/doc/usr_06.txt

@@ -1,4 +1,4 @@
-*usr_06.txt*	For Vim version 8.2.  Last change: 2019 Jun 01
+*usr_06.txt*	For Vim version 8.2.  Last change: 2021 Nov 07
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -184,7 +184,30 @@ this command: >
 	:runtime syntax/colortest.vim
 
 You will see text in various color combinations.  You can check which ones are
-readable and look nice.
+readable and look nice. These aren't the only colors available to you though.
+You can specify #rrggbb hex colors and you can define new names for hex
+colors in |v:colornames| like so: >
+
+	let v:colornames['mine_red'] = '#aa0000'
+<
+If you are authoring a color scheme for others to use, it is important
+to define these colors only when they do not exist: >
+
+	call extend(v:colornames, {'mine_red': '#aa0000'}, 'keep')
+
+This allows users of the color scheme to override the precise definition of
+that color prior to loading your color scheme. For example, in a |.vimrc|
+file:
+
+	runtime colors/lists/css_colors.vim
+	let v:colornames['your_red'] = v:colornames['css_red']
+	colorscheme yourscheme
+
+As a color scheme author, you should be able to rely on some color names for
+GUI colors. These are defined in `colors/lists/default.vim`. All such files
+found on the |'runtimepath'| are loaded each time the colorscheme command is
+run. A canonical list is provided by the vim distribution, which should
+include all X11 colors (previously defined in rgb.txt).
 
 ==============================================================================
 *06.4*	With colors or without colors

runtime/doc/usr_20.txt

@@ -1,4 +1,4 @@
-*usr_20.txt*	For Vim version 8.2.  Last change: 2006 Apr 24
+*usr_20.txt*	For Vim version 8.2.  Last change: 2021 Nov 18
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -289,11 +289,11 @@ In chapter 3 we briefly mentioned the history.  The basics are that you can
 use the <Up> key to recall an older command line.  <Down> then takes you back
 to newer commands.
 
-There are actually four histories.  The ones we will mention here are for ":"
+There are actually five histories.  The ones we will mention here are for ":"
 commands and for "/" and "?" search commands.  The "/" and "?" commands share
-the same history, because they are both search commands.  The two other
-histories are for expressions and input lines for the input() function.
-|cmdline-history|
+the same history, because they are both search commands.  The three other
+histories are for expressions, debug mode commands and input lines for the
+input() function.  |cmdline-history|
 
 Suppose you have done a ":set" command, typed ten more colon commands and then
 want to repeat that ":set" command again.  You could press ":" and then ten

runtime/doc/usr_41.txt

@@ -925,6 +925,8 @@ Syntax and highlighting:	  *syntax-functions* *highlighting-functions*
 	getmatches()		get all matches defined by |matchadd()| and
 				the |:match| commands
 	hlexists()		check if a highlight group exists
+	hlget()			get highlight group attributes
+	hlset()			set highlight group attributes
 	hlID()			get ID of a highlight group
 	synID()			get syntax ID at a specific position
 	synIDattr()		get a specific attribute of a syntax ID

runtime/doc/various.txt

@@ -172,7 +172,7 @@ g8			Print the hex values of the bytes used in the
 
 							*:z!*
 :[range]z![+-^.=][count]
-			Like ":z:", but when [count] is not specified, it
+			Like ":z", but when [count] is not specified, it
 			defaults to the Vim window height minus one.
 
 :[range]z[!]#[+-^.=][count]				*:z#*

runtime/doc/vim9.txt

@@ -103,7 +103,7 @@ script and `:def` functions; details are below:
 	writefile(['done'], 'file.txt')
 - You cannot use `:xit`, `:t`, `:k`, `:append`, `:change`, `:insert`, `:open`,
   and `:s` or `:d` with only flags.
-  or curly-braces names.
+- You cannot use curly-braces names.
 - A range before a command must be prefixed with a colon: >
 	:%s/this/that
 - Executing a register with "@r" does not work, you can prepend a colon or use
@@ -206,7 +206,7 @@ When a function argument is optional (it has a default value) passing `v:none`
 as the argument results in using the default value.  This is useful when you
 want to specify a value for an argument that comes after an argument that
 should use its default value.  Example: >
-	def MyFunc(one = 'one', last = 'last)
+	def MyFunc(one = 'one', last = 'last')
 	  ...
 	enddef
 	MyFunc(v:none, 'LAST')  # first argument uses default value 'one'
@@ -631,7 +631,7 @@ at the start of the line indicates line continuation: >
 		|   echo 'match'
 		| endif
 
-Note that this means that in heredoc the first line cannot be a bar: >
+Note that this means that in heredoc the first line cannot start with a bar: >
 	var lines =<< trim END
 	   | this doesn't work
 	END
@@ -639,7 +639,7 @@ Either use an empty line at the start or do not use heredoc.  Or temporarily
 add the "C" flag to 'cpoptions': >
 	set cpo+=C
 	var lines =<< trim END
-	   | this doesn't work
+	   | this works
 	END
 	set cpo-=C
 If the heredoc is inside a function 'cpoptions' must be set before :def and
@@ -942,9 +942,22 @@ Ex command ranges need to be prefixed with a colon. >
 
 Some Ex commands can be confused with assignments in Vim9 script: >
 	g:name = value    # assignment
-	g:pattern:cmd	  # invalid command - ERROR
 	:g:pattern:cmd	  # :global command
 
+To avoid confusion between a `:global` or `:substitute` command and an
+expression or assignment, a few separators cannot be used when these commands
+are abbreviated to a single character: ':', '-' and '.'. >
+	g:pattern:cmd	  # invalid command - ERROR
+	s:pattern:repl	  # invalid command - ERROR
+	g-pattern-cmd	  # invalid command - ERROR
+	s-pattern-repl	  # invalid command - ERROR
+	g.pattern.cmd	  # invalid command - ERROR
+	s.pattern.repl	  # invalid command - ERROR
+
+Also, there cannot be a space between the command and the separator: >
+	g /pattern/cmd	  # invalid command - ERROR
+	s /pattern/repl	  # invalid command - ERROR
+
 Functions defined with `:def` compile the whole function.  Legacy functions
 can bail out, and the following lines are not parsed: >
 	func Maybe()
@@ -1105,7 +1118,7 @@ The map argument is a string expression, which is evaluated without the
 function scope.  Instead, use a lambda: >
 	def MapList(): list<string>
 	  var list = ['aa', 'bb', 'cc', 'dd']
-	  return range(1, 2)->map(( _, v) => list[v])
+	  return range(1, 2)->map((_, v) => list[v])
 	enddef
 
 The same is true for commands that are not compiled, such as `:global`.
@@ -1309,16 +1322,16 @@ an error, thus breaking backwards compatibility.  For example:
 - Using a string value when setting a number option.
 - Using a number where a string is expected.   *E1024*
 
-One consequence is that the item type of a list or dict given to map() must
+One consequence is that the item type of a list or dict given to |map()| must
 not change.  This will give an error in Vim9 script: >
-	vim9 echo map([1, 2, 3], (i, v) => 'item ' .. i)
+	echo map([1, 2, 3], (i, v) => 'item ' .. i)
 	E1012: Type mismatch; expected number but got string
-Instead use |mapnew(): >
-	vim9 echo mapnew([1, 2, 3], (i, v) => 'item ' .. i)
+Instead use |mapnew()|: >
+	echo mapnew([1, 2, 3], (i, v) => 'item ' .. i)
 	['item 0', 'item 1', 'item 2']
 
 If the item type was determined to be "any" it can change to a more specific
-type.  E.g. when a list of mixed types gets changed to a list of numbers: >
+type.  E.g. when a list of mixed types gets changed to a list of strings: >
 	var mylist = [1, 2.0, '3']
 	# typename(mylist) == "list<any>"
 	map(mylist, (i, v) => 'item ' .. i)

runtime/doc/visual.txt

@@ -1,4 +1,4 @@
-*visual.txt*    For Vim version 8.2.  Last change: 2021 May 30
+*visual.txt*    For Vim version 8.2.  Last change: 2021 Nov 21
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -370,7 +370,8 @@ same amount of text as the last time:
   last line the same number of characters as in the last line the last time.
 The start of the text is the Cursor position.  If the "$" command was used as
 one of the last commands to extend the highlighted text, the repeating will
-be applied up to the rightmost column of the longest line.
+be applied up to the rightmost column of the longest line.  Any count passed
+to the `.` command is not used.
 
 
 ==============================================================================

runtime/doc/windows.txt

@@ -1358,6 +1358,7 @@ directory	Displays directory contents.  Can be used by a file explorer
 <		The buffer name is the name of the directory and is adjusted
 		when using the |:cd| command.
 
+						*scratch-buffer*
 scratch		Contains text that can be discarded at any time.  It is kept
 		when closing the window, it must be deleted explicitly.
 		Settings: >

runtime/filetype.vim

@@ -1,7 +1,7 @@
 " Vim support file to detect file types
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2021 Oct 03
+" Last Change:	2021 Nov 16
 
 " Listen very carefully, I will say this only once
 if exists("did_load_filetypes")
@@ -617,6 +617,9 @@ autocmd BufRead,BufNewFile *.fnl		setf fennel
 " Fetchmail RC file
 au BufNewFile,BufRead .fetchmailrc		setf fetchmail
 
+" Fish shell
+au BufNewFile,BufRead *.fish			setf fish
+
 " FlexWiki - disabled, because it has side effects when a .wiki file
 " is not actually FlexWiki
 "au BufNewFile,BufRead *.wiki			setf flexwiki
@@ -647,7 +650,7 @@ au BufNewFile,BufRead *.fsl			setf framescript
 au BufNewFile,BufRead fstab,mtab		setf fstab
 
 " GDB command files
-au BufNewFile,BufRead .gdbinit			setf gdb
+au BufNewFile,BufRead .gdbinit,gdbinit		setf gdb
 
 " GDMO
 au BufNewFile,BufRead *.mo,*.gdmo		setf gdmo
@@ -707,6 +710,7 @@ au BufNewFile,BufRead *.gpi			setf gnuplot
 
 " Go (Google)
 au BufNewFile,BufRead *.go			setf go
+au BufNewFile,BufRead Gopkg.lock		setf toml
 
 " GrADS scripts
 au BufNewFile,BufRead *.gs			setf grads
@@ -1290,7 +1294,7 @@ au BufNewFile,BufRead *.rcp			setf pilrc
 au BufNewFile,BufRead .pinerc,pinerc,.pinercex,pinercex		setf pine
 
 " Pipenv Pipfiles
-au BufNewFile,BufRead Pipfile			setf config
+au BufNewFile,BufRead Pipfile			setf toml
 au BufNewFile,BufRead Pipfile.lock		setf json
 
 " PL/1, PL/I
@@ -1492,6 +1496,9 @@ au BufNewFile,BufRead robots.txt		setf robots
 " Rpcgen
 au BufNewFile,BufRead *.x			setf rpcgen
 
+" MikroTik RouterOS script
+au BufRead,BufNewFile *.rsc			setf routeros
+
 " reStructuredText Documentation Format
 au BufNewFile,BufRead *.rst			setf rst
 
@@ -1524,6 +1531,7 @@ au BufNewFile,BufRead [rR]antfile,*.rant,[rR]akefile,*.rake	setf ruby
 
 " Rust
 au BufNewFile,BufRead *.rs			setf rust
+au BufNewFile,BufRead Cargo.lock,*/.cargo/config,*/.cargo/credentials	setf toml
 
 " S-lang (or shader language, or SmallLisp)
 au BufNewFile,BufRead *.sl			setf slang
@@ -2299,12 +2307,18 @@ au BufNewFile,BufRead .bashrc*,.bash[_-]profile*,.bash[_-]logout*,.bash[_-]alias
 au BufNewFile,BufRead .kshrc* call dist#ft#SetFileTypeSH("ksh")
 au BufNewFile,BufRead .profile* call dist#ft#SetFileTypeSH(getline(1))
 
+" Sudoers
+au BufNewFile,BufRead */etc/sudoers.d/*		call s:StarSetf('sudoers')
+
 " tcsh scripts ending in a star
 au BufNewFile,BufRead .tcshrc*	call dist#ft#SetFileTypeShell("tcsh")
 
 " csh scripts ending in a star
 au BufNewFile,BufRead .login*,.cshrc*  call dist#ft#CSH()
 
+" tmux configuration with arbitrary extension
+au BufNewFile,BufRead {.,}tmux*.conf*		setf tmux
+
 " VHDL
 au BufNewFile,BufRead *.vhdl_[0-9]*		call s:StarSetf('vhdl')
 

runtime/ftplugin/aap.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:	Aap recipe
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2013 Apr 05
+" Last Change:	2021 Nov 14
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -11,8 +11,9 @@ endif
 " Don't load another plugin for this buffer
 let b:did_ftplugin = 1
 
-" Reset 'formatoptions', 'comments' and 'expandtab' to undo this plugin.
-let b:undo_ftplugin = "setl fo< com< et<"
+" Reset 'formatoptions', 'comments', 'commentstring' and 'expandtab' to undo
+" this plugin.
+let b:undo_ftplugin = "setl fo< com< cms< et<"
 
 " Set 'formatoptions' to break comment lines but not other lines,
 " and insert the comment leader when hitting <CR> or using "o".
@@ -20,6 +21,12 @@ setlocal fo-=t fo+=croql
 
 " Set 'comments' to format dashed lists in comments.
 setlocal comments=s:#\ -,m:#\ \ ,e:#,n:#,fb:-
+setlocal commentstring=#\ %s
 
 " Expand tabs to spaces to avoid trouble.
 setlocal expandtab
+
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let b:browsefilter = "Aap Recipe Files (*.aap)\t*.aap\nAll Files (*.*)\t*.*\n"
+  let b:undo_ftplugin ..= " | unlet! b:browsefilter"
+endif

runtime/ftplugin/changelog.vim

@@ -2,7 +2,7 @@
 " Language:             generic Changelog file
 " Maintainer:           Martin Florian <marfl@posteo.de>
 " Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2015-10-25
+" Latest Revision:      2021-10-17
 " Variables:
 "   g:changelog_timeformat (deprecated: use g:changelog_dateformat instead) -
 "       description: the timeformat used in ChangeLog entries.
@@ -55,7 +55,7 @@ if &filetype == 'changelog'
     elseif $EMAIL_ADDRESS != ""
       return $EMAIL_ADDRESS
     endif
-    
+
     let login = s:login()
     return printf('%s <%s@%s>', s:name(login), login, s:hostname())
   endfunction
@@ -223,12 +223,6 @@ if &filetype == 'changelog'
     let &paste = save_paste
   endfunction
 
-  if exists(":NewChangelogEntry") != 2
-    nnoremap <buffer> <silent> <Leader>o :<C-u>call <SID>new_changelog_entry('')<CR>
-    xnoremap <buffer> <silent> <Leader>o :<C-u>call <SID>new_changelog_entry('')<CR>
-    command! -nargs=0 NewChangelogEntry call s:new_changelog_entry('')
-  endif
-
   let b:undo_ftplugin = "setl com< fo< et< ai<"
 
   setlocal comments=
@@ -241,14 +235,26 @@ if &filetype == 'changelog'
     let b:undo_ftplugin .= " tw<"
   endif
 
+  if !exists("no_plugin_maps") && !exists("no_changelog_maps") && exists(":NewChangelogEntry") != 2
+    nnoremap <buffer> <silent> <Leader>o :<C-u>call <SID>new_changelog_entry('')<CR>
+    xnoremap <buffer> <silent> <Leader>o :<C-u>call <SID>new_changelog_entry('')<CR>
+    command! -buffer -nargs=0 NewChangelogEntry call s:new_changelog_entry('')
+    let b:undo_ftplugin .= " | sil! exe 'nunmap <buffer> <Leader>o'" .
+          \                " | sil! exe 'vunmap <buffer> <Leader>o'" .
+          \                " | sil! delc NewChangelogEntry"
+  endif
+
   let &cpo = s:cpo_save
   unlet s:cpo_save
 else
   let s:cpo_save = &cpo
   set cpo&vim
 
-  " Add the Changelog opening mapping
-  nnoremap <silent> <Leader>o :call <SID>open_changelog()<CR>
+  if !exists("no_plugin_maps") && !exists("no_changelog_maps")
+    " Add the Changelog opening mapping
+    nnoremap <silent> <Leader>o :call <SID>open_changelog()<CR>
+    let b:undo_ftplugin .= " | silent! exe 'nunmap <buffer> <Leader>o"
+  endif
 
   function! s:open_changelog()
     let path = expand('%:p:h')

runtime/ftplugin/clojure.vim

@@ -1,11 +1,11 @@
 " Vim filetype plugin file
 " Language:           Clojure
-" Maintainer:         Alex Vear <av@axvr.io>
+" Maintainer:         Alex Vear <alex@vear.uk>
 " Former Maintainers: Sung Pae <self@sungpae.com>
 "                     Meikel Brandmeyer <mb@kotka.de>
 " URL:                https://github.com/clojure-vim/clojure.vim
 " License:            Vim (see :h license)
-" Last Change:        2021-02-13
+" Last Change:        2021-10-26
 
 if exists("b:did_ftplugin")
 	finish
@@ -17,7 +17,7 @@ set cpo&vim
 
 let b:undo_ftplugin = 'setlocal iskeyword< define< formatoptions< comments< commentstring< lispwords<'
 
-setlocal iskeyword+=?,-,*,!,+,/,=,<,>,.,:,$
+setlocal iskeyword+=?,-,*,!,+,/,=,<,>,.,:,$,%,&,\|
 
 " There will be false positives, but this is better than missing the whole set
 " of user-defined def* definitions.
@@ -43,7 +43,7 @@ setlocal commentstring=;\ %s
 " specially and hence are not indented specially.
 "
 " -*- LISPWORDS -*-
-" Generated from https://github.com/clojure-vim/clojure.vim/blob/f8594e7030cdfb0b7990ac92953c77a08a7220f0/clj/src/vim_clojure_static/generate.clj
+" Generated from https://github.com/clojure-vim/clojure.vim/blob/62b215f079ce0f3834fd295c7a7f6bd8cc54bcc3/clj/src/vim_clojure_static/generate.clj
 setlocal lispwords=as->,binding,bound-fn,case,catch,cond->,cond->>,condp,def,definline,definterface,defmacro,defmethod,defmulti,defn,defn-,defonce,defprotocol,defrecord,defstruct,deftest,deftest-,deftype,doseq,dotimes,doto,extend,extend-protocol,extend-type,fn,for,if,if-let,if-not,if-some,let,letfn,locking,loop,ns,proxy,reify,set-test,testing,when,when-first,when-let,when-not,when-some,while,with-bindings,with-in-str,with-local-vars,with-open,with-precision,with-redefs,with-redefs-fn,with-test
 
 " Provide insert mode completions for special forms and clojure.core. As
@@ -64,8 +64,8 @@ if exists('loaded_matchit')
 	let b:undo_ftplugin .= ' | unlet! b:match_words b:match_skip'
 endif
 
-" Win32 can filter files in the browse dialog
-if has("gui_win32") && !exists("b:browsefilter")
+" Filter files in the browse dialog
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
 	let b:browsefilter = "Clojure Source Files (*.clj)\t*.clj\n" .
 	                   \ "ClojureScript Source Files (*.cljs)\t*.cljs\n" .
 	                   \ "Java Source Files (*.java)\t*.java\n" .

runtime/ftplugin/context.vim

@@ -2,7 +2,7 @@
 " Language:           ConTeXt typesetting engine
 " Maintainer:         Nicola Vitacolonna <nvitacolonna@gmail.com>
 " Former Maintainers: Nikolai Weibull <now@bitwi.se>
-" Latest Revision:    2016 Oct 30
+" Latest Revision:    2021 Oct 15
 
 if exists("b:did_ftplugin")
   finish
@@ -17,7 +17,6 @@ if !exists('current_compiler')
 endif
 
 let b:undo_ftplugin = "setl com< cms< def< inc< sua< fo< ofu<"
-      \ . "| unlet! b:match_ignorecase b:match_words b:match_skip"
 
 setlocal comments=b:%D,b:%C,b:%M,:% commentstring=%\ %s formatoptions+=tjcroql2
 if get(b:, 'context_metapost', get(g:, 'context_metapost', 1))
@@ -35,11 +34,12 @@ let &l:include = '^\s*\\\%(input\|component\|product\|project\|environment\)'
 
 setlocal suffixesadd=.tex
 
-if exists("loaded_matchit")
+if exists("loaded_matchit") && !exists("b:match_words")
   let b:match_ignorecase = 0
   let b:match_skip = 'r:\\\@<!\%(\\\\\)*%'
   let b:match_words = '(:),\[:],{:},\\(:\\),\\\[:\\],' .
         \ '\\start\(\a\+\):\\stop\1'
+  let b:undo_ftplugin .= " | unlet! b:match_ignorecase b:match_words b:match_skip"
 endif
 
 let s:context_regex = {
@@ -57,19 +57,28 @@ function! s:move_around(count, what, flags, visual)
   call map(range(2, a:count), 'search(s:context_regex[a:what], a:flags)')
 endfunction
 
-" Move around macros.
-nnoremap <silent><buffer> [[ :<C-U>call <SID>move_around(v:count1, "beginsection", "bW", v:false) <CR>
-vnoremap <silent><buffer> [[ :<C-U>call <SID>move_around(v:count1, "beginsection", "bW", v:true)  <CR>
-nnoremap <silent><buffer> ]] :<C-U>call <SID>move_around(v:count1, "beginsection", "W",  v:false) <CR>
-vnoremap <silent><buffer> ]] :<C-U>call <SID>move_around(v:count1, "beginsection", "W",  v:true)  <CR>
-nnoremap <silent><buffer> [] :<C-U>call <SID>move_around(v:count1, "endsection",   "bW", v:false) <CR>
-vnoremap <silent><buffer> [] :<C-U>call <SID>move_around(v:count1, "endsection",   "bW", v:true)  <CR>
-nnoremap <silent><buffer> ][ :<C-U>call <SID>move_around(v:count1, "endsection",   "W",  v:false) <CR>
-vnoremap <silent><buffer> ][ :<C-U>call <SID>move_around(v:count1, "endsection",   "W",  v:true)  <CR>
-nnoremap <silent><buffer> [{ :<C-U>call <SID>move_around(v:count1, "beginblock",   "bW", v:false) <CR>
-vnoremap <silent><buffer> [{ :<C-U>call <SID>move_around(v:count1, "beginblock",   "bW", v:true)  <CR>
-nnoremap <silent><buffer> ]} :<C-U>call <SID>move_around(v:count1, "endblock",     "W",  v:false) <CR>
-vnoremap <silent><buffer> ]} :<C-U>call <SID>move_around(v:count1, "endblock",     "W",  v:true)  <CR>
+if !exists("no_plugin_maps") && !exists("no_context_maps")
+  " Move around macros.
+  nnoremap <silent><buffer> [[ :<C-U>call <SID>move_around(v:count1, "beginsection", "bW", v:false) <CR>
+  vnoremap <silent><buffer> [[ :<C-U>call <SID>move_around(v:count1, "beginsection", "bW", v:true)  <CR>
+  nnoremap <silent><buffer> ]] :<C-U>call <SID>move_around(v:count1, "beginsection", "W",  v:false) <CR>
+  vnoremap <silent><buffer> ]] :<C-U>call <SID>move_around(v:count1, "beginsection", "W",  v:true)  <CR>
+  nnoremap <silent><buffer> [] :<C-U>call <SID>move_around(v:count1, "endsection",   "bW", v:false) <CR>
+  vnoremap <silent><buffer> [] :<C-U>call <SID>move_around(v:count1, "endsection",   "bW", v:true)  <CR>
+  nnoremap <silent><buffer> ][ :<C-U>call <SID>move_around(v:count1, "endsection",   "W",  v:false) <CR>
+  vnoremap <silent><buffer> ][ :<C-U>call <SID>move_around(v:count1, "endsection",   "W",  v:true)  <CR>
+  nnoremap <silent><buffer> [{ :<C-U>call <SID>move_around(v:count1, "beginblock",   "bW", v:false) <CR>
+  vnoremap <silent><buffer> [{ :<C-U>call <SID>move_around(v:count1, "beginblock",   "bW", v:true)  <CR>
+  nnoremap <silent><buffer> ]} :<C-U>call <SID>move_around(v:count1, "endblock",     "W",  v:false) <CR>
+  vnoremap <silent><buffer> ]} :<C-U>call <SID>move_around(v:count1, "endblock",     "W",  v:true)  <CR>
+
+  let b:undo_ftplugin .= " | sil! exe 'nunmap <buffer> [[' | sil! exe 'vunmap <buffer> [['" .
+	\                " | sil! exe 'nunmap <buffer> ]]' | sil! exe 'vunmap <buffer> ]]'" .
+	\                " | sil! exe 'nunmap <buffer> []' | sil! exe 'vunmap <buffer> []'" .
+	\                " | sil! exe 'nunmap <buffer> ][' | sil! exe 'vunmap <buffer> ]['" .
+	\                " | sil! exe 'nunmap <buffer> [{' | sil! exe 'vunmap <buffer> [{'" .
+	\                " | sil! exe 'nunmap <buffer> ]}' | sil! exe 'vunmap <buffer> ]}'"
+end
 
 " Other useful mappings
 if get(g:, 'context_mappings', 1)
@@ -81,16 +90,22 @@ if get(g:, 'context_mappings', 1)
     call cursor(search(s:tp_regex, 'W') - 1, 1)
   endf
 
-  " Reflow paragraphs with commands like gqtp ("gq TeX paragraph")
-  onoremap <silent><buffer> tp :<c-u>call <sid>tp()<cr>
-  " Select TeX paragraph
-  vnoremap <silent><buffer> tp <esc>:<c-u>call <sid>tp()<cr>
+  if !exists("no_plugin_maps") && !exists("no_context_maps")
+    " Reflow paragraphs with commands like gqtp ("gq TeX paragraph")
+    onoremap <silent><buffer> tp :<c-u>call <sid>tp()<cr>
+    " Select TeX paragraph
+    vnoremap <silent><buffer> tp <esc>:<c-u>call <sid>tp()<cr>
 
-  " $...$ text object
-  onoremap <silent><buffer> i$ :<c-u>normal! T$vt$<cr>
-  onoremap <silent><buffer> a$ :<c-u>normal! F$vf$<cr>
-  vnoremap <buffer> i$ T$ot$
-  vnoremap <buffer> a$ F$of$
+    " $...$ text object
+    onoremap <silent><buffer> i$ :<c-u>normal! T$vt$<cr>
+    onoremap <silent><buffer> a$ :<c-u>normal! F$vf$<cr>
+    vnoremap <buffer> i$ T$ot$
+    vnoremap <buffer> a$ F$of$
+
+    let b:undo_ftplugin .= " | sil! exe 'ounmap <buffer> tp' | sil! exe 'vunmap <buffer> tp'" .
+	  \                " | sil! exe 'ounmap <buffer> i$' | sil! exe 'vunmap <buffer> i$'" .
+	  \                " | sil! exe 'ounmap <buffer> a$' | sil! exe 'vunmap <buffer> a$'"
+    endif
 endif
 
 " Commands for asynchronous typesetting

runtime/ftplugin/csh.vim

@@ -1,21 +1,23 @@
 " Vim filetype plugin file
-" Language:	csh
-" Maintainer:	Dan Sharp <dwsharp at users dot sourceforge dot net>
-" Last Changed: 20 Jan 2009
-" URL:		http://dwsharp.users.sourceforge.net/vim/ftplugin
+" Language:		csh
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Dan Sharp <dwsharp at users dot sourceforge dot net>
+" Contributor:		Johannes Zellner <johannes@zellner.org>
+" Last Change:		2021 Oct 15
 
 if exists("b:did_ftplugin") | finish | endif
 let b:did_ftplugin = 1
 
-" Make sure the continuation lines below do not cause problems in
-" compatibility mode.
 let s:save_cpo = &cpo
 set cpo-=C
 
+setlocal comments=:#
 setlocal commentstring=#%s
 setlocal formatoptions-=t
 setlocal formatoptions+=crql
 
+let b:undo_ftplugin = "setlocal com< cms< fo<"
+
 " Csh:  thanks to Johannes Zellner
 " - Both foreach and end must appear alone on separate lines.
 " - The words else and endif must appear at the beginning of input lines;
@@ -23,26 +25,27 @@ setlocal formatoptions+=crql
 " - Each case label and the default label must appear at the start of a
 "   line.
 " - while and end must appear alone on their input lines.
-if exists("loaded_matchit")
-    let b:match_words =
-      \ '^\s*\<if\>.*(.*).*\<then\>:'.
-      \   '^\s*\<else\>\s\+\<if\>.*(.*).*\<then\>:^\s*\<else\>:'.
-      \   '^\s*\<endif\>,'.
-      \ '\%(^\s*\<foreach\>\s\+\S\+\|^s*\<while\>\).*(.*):'.
-      \   '\<break\>:\<continue\>:^\s*\<end\>,'.
-      \ '^\s*\<switch\>.*(.*):^\s*\<case\>\s\+:^\s*\<default\>:^\s*\<endsw\>'
+if exists("loaded_matchit") && !exists("b:match_words")
+  let s:line_start = '\%(^\s*\)\@<='
+  let b:match_words =
+	\ s:line_start .. 'if\s*(.*)\s*then\>:' ..
+	\   s:line_start .. 'else\s\+if\s*(.*)\s*then\>:' .. s:line_start .. 'else\>:' ..
+	\   s:line_start .. 'endif\>,' ..
+	\ s:line_start .. '\%(\<foreach\s\+\h\w*\|while\)\s*(:' ..
+	\   '\<break\>:\<continue\>:' ..
+	\   s:line_start .. 'end\>,' ..
+	\ s:line_start .. 'switch\s*(:' ..
+	\   s:line_start .. 'case\s\+:' .. s:line_start .. 'default\>:\<breaksw\>:' ..
+	\   s:line_start .. 'endsw\>'
+  unlet s:line_start
+  let b:undo_ftplugin ..= " | unlet b:match_words"
 endif
 
-" Change the :browse e filter to primarily show csh-related files.
-if has("gui_win32")
-    let  b:browsefilter="csh Scripts (*.csh)\t*.csh\n" .
-		\	"All Files (*.*)\t*.*\n"
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let  b:browsefilter="csh Scripts (*.csh)\t*.csh\n" ..
+	\	      "All Files (*.*)\t*.*\n"
+  let b:undo_ftplugin ..= " | unlet b:browsefilter"
 endif
 
-" Undo the stuff we changed.
-let b:undo_ftplugin = "setlocal commentstring< formatoptions<" .
-		\     " | unlet! b:match_words b:browsefilter"
-
-" Restore the saved compatibility options.
 let &cpo = s:save_cpo
 unlet s:save_cpo

runtime/ftplugin/diff.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:	Diff
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2020 Jul 18
+" Last Change:	2021 Nov 14
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -9,10 +9,15 @@ if exists("b:did_ftplugin")
 endif
 let b:did_ftplugin = 1
 
-let b:undo_ftplugin = "setl modeline<"
+let b:undo_ftplugin = "setl modeline< commentstring<"
 
 " Don't use modelines in a diff, they apply to the diffed file
 setlocal nomodeline
 
 " If there are comments they start with #
-let &commentstring = "# %s"
+let &l:commentstring = "# %s"
+
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let b:browsefilter = "Diff Files (*.diff)\t*.diff\nPatch Files (*.patch)\t*.h\nAll Files (*.*)\t*.*\n"
+  let b:undo_ftplugin ..= " | unlet! b:browsefilter"
+endif

runtime/ftplugin/indent.vim

@@ -1,7 +1,8 @@
 " Vim filetype plugin file
-" Language:             indent(1) configuration file
-" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2008-07-09
+" Language:		indent(1) configuration file
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
+" Latest Revision:	2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/lua.vim

@@ -1,7 +1,8 @@
 " Vim filetype plugin file.
-" Language:	Lua 4.0+
-" Maintainer:	Max Ischenko <mfi@ukr.net>
-" Last Change:	2012 Mar 07
+" Language:	        Lua
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Max Ischenko <mfi@ukr.net>
+" Last Change:	        2021 Nov 15
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -16,27 +17,30 @@ set cpo&vim
 
 " Set 'formatoptions' to break comment lines but not other lines, and insert
 " the comment leader when hitting <CR> or using "o".
-setlocal fo-=t fo+=croql
+setlocal formatoptions-=t formatoptions+=croql
 
-setlocal com=:--
-setlocal cms=--%s
+setlocal comments=:--
+setlocal commentstring=--%s
 setlocal suffixesadd=.lua
 
+let b:undo_ftplugin = "setlocal fo< com< cms< sua<"
 
-" The following lines enable the macros/matchit.vim plugin for
-" extended matching with the % key.
-if exists("loaded_matchit")
-
+if exists("loaded_matchit") && !exists("b:match_words")
   let b:match_ignorecase = 0
   let b:match_words =
-    \ '\<\%(do\|function\|if\)\>:' .
-    \ '\<\%(return\|else\|elseif\)\>:' .
-    \ '\<end\>,' .
-    \ '\<repeat\>:\<until\>'
+        \ '\<\%(do\|function\|if\)\>:' .
+        \ '\<\%(return\|else\|elseif\)\>:' .
+        \ '\<end\>,' .
+        \ '\<repeat\>:\<until\>,' .
+        \ '\%(--\)\=\[\(=*\)\[:]\1]'
+  let b:undo_ftplugin .= " | unlet! b:match_words b:match_ignorecase"
+endif
 
-endif " exists("loaded_matchit")
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let b:browsefilter = "Lua Source Files (*.lua)\t*.lua\n" .
+	\              "All Files (*.*)\t*.*\n"
+  let b:undo_ftplugin .= " | unlet! b:browsefilter"
+endif
 
 let &cpo = s:cpo_save
 unlet s:cpo_save
-
-let b:undo_ftplugin = "setlocal fo< com< cms< suffixesadd<"

runtime/ftplugin/mail.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:	Mail
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2012 Nov 20
+" Last Change:	2021 Oct 23
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -26,6 +26,14 @@ setlocal fo+=tcql
 " Add n:> to 'comments, in case it was removed elsewhere
 setlocal comments+=n:>
 
+" .eml files are universally formatted with DOS line-endings, per RFC5322.
+" If the file was not DOS the it will be marked as changed, which is probably
+" a good thing.
+if expand('%:e') ==? 'eml'
+  let b:undo_ftplugin ..= " fileformat=" .. &fileformat
+  setlocal fileformat=dos
+endif
+
 " Add mappings, unless the user doesn't want this.
 if !exists("no_plugin_maps") && !exists("no_mail_maps")
   " Quote text by inserting "> "

runtime/ftplugin/meson.vim

@@ -12,9 +12,28 @@ set cpo&vim
 
 setlocal commentstring=#\ %s
 setlocal comments=:#
+setlocal formatoptions+=croql formatoptions-=t
 
-setlocal shiftwidth=2
-setlocal softtabstop=2
+let b:undo_ftplugin = "setl com< cms< fo<"
+
+if get(g:, "meson_recommended_style", 1)
+  setlocal expandtab
+  setlocal shiftwidth=2
+  setlocal softtabstop=2
+  let b:undo_ftplugin .= " | setl et< sts< sw<"
+endif
+
+if exists("loaded_matchit") && !exists("b:match_words")
+  let b:match_words = '\<if\>:\<elif\>:\<else\>:\<endif\>,' .
+	\             '\<foreach\>:\<break\>:\<continue\>:\<endforeach\>'
+  let b:undo_ftplugin .= " | unlet! b:match_words"
+endif
+
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let b:browsefilter = "Meson Build Files (meson.build)\tmeson.build\n" .
+	\	       "All Files (*.*)\t*.*\n"
+  let b:undo_ftplugin .= " | unlet! b:browsefilter"
+endif
 
 let &cpo = s:keepcpo
 unlet s:keepcpo

runtime/ftplugin/nsis.vim

@@ -3,7 +3,7 @@
 " Maintainer:		Ken Takata
 " URL:			https://github.com/k-takata/vim-nsis
 " Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
-" Last Change:		2018-01-26
+" Last Change:		2021-10-18
 
 if exists("b:did_ftplugin")
   finish
@@ -15,7 +15,6 @@ set cpo&vim
 let b:did_ftplugin = 1
 
 let b:undo_ftplugin = "setl com< cms< fo< def< inc<"
-      \ " | unlet! b:match_ignorecase b:match_words"
 
 setlocal comments=s1:/*,mb:*,ex:*/,b:#,:; commentstring=;\ %s
 setlocal formatoptions-=t formatoptions+=croql
@@ -37,6 +36,7 @@ if exists("loaded_matchit")
 	\ '\${MementoSection}:\${MementoSectionEnd},' .
 	\ '!if\%(\%(macro\)\?n\?def\)\?\>:!else\>:!endif\>,' .
 	\ '!macro\>:!macroend\>'
+  let b:undo_ftplugin .= " | unlet! b:match_ignorecase b:match_words"
 endif
 
 let &cpo = s:cpo_save

runtime/ftplugin/routeros.vim

@@ -0,0 +1,29 @@
+" Vim filetype plugin file
+" Language:	MikroTik RouterOS Script
+" Maintainer:	zainin <z@wintr.dev>
+" Last Change:	2021 Nov 14
+
+if exists("b:did_ftplugin")
+  finish
+endif
+let b:did_ftplugin = 1
+
+let s:save_cpo = &cpo
+set cpo-=C
+
+setlocal comments=:#
+setlocal commentstring=#\ %s
+setlocal formatoptions-=t formatoptions+=croql
+
+let b:undo_ftplugin = "setlocal com< cms< fo<"
+
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let b:browsefilter = "RouterOS Script Files (*.rsc)\t*.rsc\n" ..
+	\	       "All Files (*.*)\t*.*\n"
+  let b:undo_ftplugin ..= " | unlet! b:browsefilter"
+endif
+
+let &cpo = s:save_cpo
+unlet! s:save_cpo
+
+" vim: nowrap sw=2 sts=2 ts=8 noet:

runtime/ftplugin/spec.vim

@@ -18,8 +18,8 @@ if !exists("no_plugin_maps") && !exists("no_spec_maps")
 	endif
 endif
 
-if !hasmapto("call SpecChangelog(\"\")<CR>")
-       noremap <buffer> <unique> <script> <Plug>SpecChangelog :call SpecChangelog("")<CR>
+if !hasmapto("call <SID>SpecChangelog(\"\")<CR>")
+       noremap <buffer> <unique> <script> <Plug>SpecChangelog :call <SID>SpecChangelog("")<CR>
 endif
 
 if !exists("*s:GetRelVer")

runtime/ftplugin/tcsh.vim

@@ -1,19 +1,17 @@
 " Vim filetype plugin file
-" Language:	tcsh
-" Maintainer:	Dan Sharp <dwsharp at users dot sourceforge dot net>
-" Last Changed: 20 Jan 2009
-" URL:		http://dwsharp.users.sourceforge.net/vim/ftplugin
+" Language:		tcsh
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Dan Sharp <dwsharp at users dot sourceforge dot net>
+" Last Change:		2021 Oct 15
 
 if exists("b:did_ftplugin") | finish | endif
 
-" Make sure the continuation lines below do not cause problems in
-" compatibility mode.
 let s:save_cpo = &cpo
 set cpo-=C
 
 " Define some defaults in case the included ftplugins don't set them.
 let s:undo_ftplugin = ""
-let s:browsefilter = "csh Files (*.csh)\t*.csh\n" .
+let s:browsefilter = "csh Files (*.csh)\t*.csh\n" ..
 	    \	     "All Files (*.*)\t*.*\n"
 
 runtime! ftplugin/csh.vim ftplugin/csh_*.vim ftplugin/csh/*.vim
@@ -27,14 +25,11 @@ if exists("b:browsefilter")
     let s:browsefilter = b:browsefilter
 endif
 
-" Change the :browse e filter to primarily show tcsh-related files.
-if has("gui_win32")
-    let  b:browsefilter="tcsh Scripts (*.tcsh)\t*.tcsh\n" . s:browsefilter
+if (has("gui_win32") || has("gui_gtk"))
+    let  b:browsefilter="tcsh Scripts (*.tcsh)\t*.tcsh\n" .. s:browsefilter
 endif
 
-" Undo the stuff we changed.
-let b:undo_ftplugin = "unlet! b:browsefilter | " . s:undo_ftplugin
+let b:undo_ftplugin = "unlet! b:browsefilter | " .. s:undo_ftplugin
 
-" Restore the saved compatibility options.
 let &cpo = s:save_cpo
 unlet s:save_cpo

runtime/ftplugin/tmux.vim

@@ -9,4 +9,7 @@ if exists("b:did_ftplugin")
 endif
 let b:did_ftplugin = 1
 
+let b:undo_ftplugin = "setlocal comments< commentstring<"
+
+setlocal comments=:#
 setlocal commentstring=#\ %s

runtime/ftplugin/toml.vim

@@ -0,0 +1,23 @@
+" Vim filetype plugin
+" Language:    TOML
+" Homepage:    https://github.com/cespare/vim-toml
+" Maintainer:  Aman Verma
+" Author:      Kevin Ballard <kevin@sb.org>
+" Last Change: Sep 21, 2021
+
+if exists('b:did_ftplugin')
+  finish
+endif
+let b:did_ftplugin = 1
+
+let s:save_cpo = &cpo
+set cpo&vim
+let b:undo_ftplugin = 'setlocal commentstring< comments<'
+
+setlocal commentstring=#\ %s
+setlocal comments=:#
+
+let &cpo = s:save_cpo
+unlet s:save_cpo
+
+" vim: et sw=2 sts=2

runtime/ftplugin/vb.vim

@@ -1,44 +1,70 @@
 " Vim filetype plugin file
-" Language:	VisualBasic (ft=vb)
-" Maintainer:	Johannes Zellner <johannes@zellner.org>
-" Last Change:	Thu, 22 Nov 2001 12:56:14 W. Europe Standard Time
+" Language:		Visual Basic (ft=vb)
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Johannes Zellner <johannes@zellner.org>
+" Last Change:		2021 Nov 17
 
-if exists("b:did_ftplugin") | finish | endif
+if exists("b:did_ftplugin")
+  finish
+endif
 let b:did_ftplugin = 1
 
-setlocal com=sr:'\ -,mb:'\ \ ,el:'\ \ ,:'
+let s:cpo_save = &cpo
+set cpo&vim
+
+setlocal comments=sr:'\ -,mb:'\ \ ,el:'\ \ ,:'
+setlocal commentstring='\ %s
+setlocal formatoptions-=t formatoptions+=croql
+
+let b:undo_ftplugin = "setlocal com< cms< fo<"
 
 " we need this wrapper, as call doesn't allow a count
-fun! <SID>VbSearch(pattern, flags)
+function! s:VbSearch(pattern, flags)
     let cnt = v:count1
     while cnt > 0
 	call search(a:pattern, a:flags)
 	let cnt = cnt - 1
     endwhile
-endfun
+endfunction
 
-let s:cpo_save = &cpo
-set cpo&vim
+if !exists("no_plugin_maps") && !exists("no_vb_maps")
+  nnoremap <buffer> <silent> [[ <Cmd>call <SID>VbSearch('^\s*\%(\%(private\<Bar>public\)\s\+\)\=\%(function\<Bar>sub\)', 'sbW')<CR>
+  vnoremap <buffer> <silent> [[ <Cmd>call <SID>VbSearch('^\s*\%(\%(private\<Bar>public\)\s\+\)\=\%(function\<Bar>sub\)', 'sbW')<CR>
+  nnoremap <buffer> <silent> ]] <Cmd>call <SID>VbSearch('^\s*\%(\%(private\<Bar>public\)\s\+\)\=\%(function\<Bar>sub\)', 'sW')<CR>
+  vnoremap <buffer> <silent> ]] <Cmd>call <SID>VbSearch('^\s*\%(\%(private\<Bar>public\)\s\+\)\=\%(function\<Bar>sub\)', 'sW')<CR>
+  nnoremap <buffer> <silent> [] <Cmd>call <SID>VbSearch('^\s*end\s\+\%(function\<Bar>sub\)', 'sbW')<CR>
+  vnoremap <buffer> <silent> [] <Cmd>call <SID>VbSearch('^\s*end\s\+\%(function\<Bar>sub\)', 'sbW')<CR>
+  nnoremap <buffer> <silent> ][ <Cmd>call <SID>VbSearch('^\s*end\s\+\%(function\<Bar>sub\)', 'sW')<CR>
+  vnoremap <buffer> <silent> ][ <Cmd>call <SID>VbSearch('^\s*end\s\+\%(function\<Bar>sub\)', 'sW')<CR>
+  let b:undo_ftplugin .= " | sil! exe 'nunmap <buffer> [[' | sil! exe 'vunmap <buffer> [['" .
+	\		 " | sil! exe 'nunmap <buffer> ]]' | sil! exe 'vunmap <buffer> ]]'" .
+	\		 " | sil! exe 'nunmap <buffer> []' | sil! exe 'vunmap <buffer> []'" .
+	\		 " | sil! exe 'nunmap <buffer> ][' | sil! exe 'vunmap <buffer> ]['"
+endif
 
-" NOTE the double escaping \\|
-nnoremap <buffer> <silent> [[ :call <SID>VbSearch('^\s*\(\(private\|public\)\s\+\)\=\(function\\|sub\)', 'bW')<cr>
-nnoremap <buffer> <silent> ]] :call <SID>VbSearch('^\s*\(\(private\|public\)\s\+\)\=\(function\\|sub\)', 'W')<cr>
-nnoremap <buffer> <silent> [] :call <SID>VbSearch('^\s*\<end\>\s\+\(function\\|sub\)', 'bW')<cr>
-nnoremap <buffer> <silent> ][ :call <SID>VbSearch('^\s*\<end\>\s\+\(function\\|sub\)', 'W')<cr>
+" TODO: line start anchors are almost certainly overly restrictive - allow
+" after statement separators.  Even in QuickBasic only block IF statements
+" were required to be at the start of a line.
+if exists("loaded_matchit") && !exists("b:match_words")
+  let b:match_ignorecase = 1
+  let b:match_words =
+	\ '\%(^\s*\)\@<=\<if\>.*\<then\>\s*\%($\|''\):\%(^\s*\)\@<=\<else\>:\%(^\s*\)\@<=\<elseif\>:\%(^\s*\)\@<=\<end\>\s\+\<if\>,' .
+	\ '\%(^\s*\)\@<=\<for\>:\%(^\s*\)\@<=\<next\>,' .
+	\ '\%(^\s*\)\@<=\<while\>:\%(^\s*\)\@<=\<wend\>,' .
+	\ '\%(^\s*\)\@<=\<do\>:\%(^\s*\)\@<=\<loop\>\s\+\<while\>,' .
+	\ '\%(^\s*\)\@<=\<select\>\s\+\<case\>:\%(^\s*\)\@<=\<case\>:\%(^\s*\)\@<=\<end\>\s\+\<select\>,' .
+	\ '\%(^\s*\)\@<=\<enum\>:\%(^\s*\)\@<=\<end\>\s\<enum\>,' .
+	\ '\%(^\s*\)\@<=\<with\>:\%(^\s*\)\@<=\<end\>\s\<with\>,' .
+	\ '\%(^\s*\)\@<=\%(\<\%(private\|public\)\>\s\+\)\=\<function\>\s\+\([^ \t(]\+\):\%(^\s*\)\@<=\<\1\>\s*=:\%(^\s*\)\@<=\<end\>\s\+\<function\>,' .
+	\ '\%(^\s*\)\@<=\%(\<\%(private\|public\)\>\s\+\)\=\<sub\>\s\+:\%(^\s*\)\@<=\<end\>\s\+\<sub\>'
+  let b:undo_ftplugin .= " | unlet! b:match_words b:match_ignorecase"
+endif
 
-" matchit support
-if exists("loaded_matchit")
-    let b:match_ignorecase=1
-    let b:match_words=
-    \ '\%(^\s*\)\@<=\<if\>.*\<then\>\s*$:\%(^\s*\)\@<=\<else\>:\%(^\s*\)\@<=\<elseif\>:\%(^\s*\)\@<=\<end\>\s\+\<if\>,' .
-    \ '\%(^\s*\)\@<=\<for\>:\%(^\s*\)\@<=\<next\>,' .
-    \ '\%(^\s*\)\@<=\<while\>:\%(^\s*\)\@<=\<wend\>,' .
-    \ '\%(^\s*\)\@<=\<do\>:\%(^\s*\)\@<=\<loop\>\s\+\<while\>,' .
-    \ '\%(^\s*\)\@<=\<select\>\s\+\<case\>:\%(^\s*\)\@<=\<case\>:\%(^\s*\)\@<=\<end\>\s\+\<select\>,' .
-    \ '\%(^\s*\)\@<=\<enum\>:\%(^\s*\)\@<=\<end\>\s\<enum\>,' .
-    \ '\%(^\s*\)\@<=\<with\>:\%(^\s*\)\@<=\<end\>\s\<with\>,' .
-    \ '\%(^\s*\)\@<=\%(\<\%(private\|public\)\>\s\+\)\=\<function\>\s\+\([^ \t(]\+\):\%(^\s*\)\@<=\<\1\>\s*=:\%(^\s*\)\@<=\<end\>\s\+\<function\>,' .
-    \ '\%(^\s*\)\@<=\%(\<\%(private\|public\)\>\s\+\)\=\<sub\>\s\+:\%(^\s*\)\@<=\<end\>\s\+\<sub\>'
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let b:browsefilter = "Visual Basic Source Files (*.bas)\t*.bas\n" .
+	\	       "Visual Basic Form Files (*.frm)\t*.frm\n" .
+	\	       "All Files (*.*)\t*.*\n"
+  let b:undo_ftplugin .= " | unlet! b:browsefilter"
 endif
 
 let &cpo = s:cpo_save

runtime/ftplugin/zimbu.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:	Zimbu
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2017 Dec 05
+" Last Change:	2021 Nov 12
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -34,9 +34,11 @@ setlocal errorformat^=%f\ line\ %l\ col\ %c:\ %m,ERROR:\ %m
 
 " When the matchit plugin is loaded, this makes the % command skip parens and
 " braces in comments.
-let b:match_words = '\(^\s*\)\@<=\(MODULE\|CLASS\|INTERFACE\|BITS\|ENUM\|SHARED\|FUNC\|REPLACE\|DEFINE\|PROC\|EQUAL\|MAIN\|IF\|GENERATE_IF\|WHILE\|REPEAT\|WITH\|DO\|FOR\|SWITCH\|TRY\)\>\|{\s*$:\(^\s*\)\@<=\(ELSE\|ELSEIF\|GENERATE_ELSE\|GENERATE_ELSEIF\|CATCH\|FINALLY\)\>:\(^\s*\)\@<=\(}\|\<UNTIL\>\)'
-
-let b:match_skip = 's:comment\|string\|zimbuchar'
+if exists("loaded_matchit") && !exists("b:match_words")
+  let b:match_words = '\(^\s*\)\@<=\(MODULE\|CLASS\|INTERFACE\|BITS\|ENUM\|SHARED\|FUNC\|REPLACE\|DEFINE\|PROC\|EQUAL\|MAIN\|IF\|GENERATE_IF\|WHILE\|REPEAT\|WITH\|DO\|FOR\|SWITCH\|TRY\)\>\|{\s*$:\(^\s*\)\@<=\(ELSE\|ELSEIF\|GENERATE_ELSE\|GENERATE_ELSEIF\|CATCH\|FINALLY\)\>:\(^\s*\)\@<=\(}\|\<UNTIL\>\)'
+  let b:match_skip = 's:comment\|string\|zimbuchar'
+  let b:undo_ftplugin ..= " | unlet! b:match_words b:match_skip"
+endif
 
 setlocal tw=78
 setlocal et sts=2 sw=2
@@ -135,9 +137,60 @@ iabbr <buffer> <expr> until GCUpperSpace("until")
 iabbr <buffer> <expr> while GCUpperSpace("while")
 iabbr <buffer> <expr> repeat GCUpper("repeat")
 
+let b:undo_ftplugin ..=
+      \ " | iunabbr <buffer> alias" ..
+      \ " | iunabbr <buffer> arg" ..
+      \ " | iunabbr <buffer> break" ..
+      \ " | iunabbr <buffer> case" ..
+      \ " | iunabbr <buffer> catch" ..
+      \ " | iunabbr <buffer> check" ..
+      \ " | iunabbr <buffer> class" ..
+      \ " | iunabbr <buffer> interface" ..
+      \ " | iunabbr <buffer> implements" ..
+      \ " | iunabbr <buffer> shared" ..
+      \ " | iunabbr <buffer> continue" ..
+      \ " | iunabbr <buffer> default" ..
+      \ " | iunabbr <buffer> extends" ..
+      \ " | iunabbr <buffer> do" ..
+      \ " | iunabbr <buffer> else" ..
+      \ " | iunabbr <buffer> elseif" ..
+      \ " | iunabbr <buffer> enum" ..
+      \ " | iunabbr <buffer> exit" ..
+      \ " | iunabbr <buffer> false" ..
+      \ " | iunabbr <buffer> fail" ..
+      \ " | iunabbr <buffer> finally" ..
+      \ " | iunabbr <buffer> for" ..
+      \ " | iunabbr <buffer> func" ..
+      \ " | iunabbr <buffer> if" ..
+      \ " | iunabbr <buffer> import" ..
+      \ " | iunabbr <buffer> in" ..
+      \ " | iunabbr <buffer> io" ..
+      \ " | iunabbr <buffer> main" ..
+      \ " | iunabbr <buffer> module" ..
+      \ " | iunabbr <buffer> new" ..
+      \ " | iunabbr <buffer> nil" ..
+      \ " | iunabbr <buffer> ok" ..
+      \ " | iunabbr <buffer> proc" ..
+      \ " | iunabbr <buffer> proceed" ..
+      \ " | iunabbr <buffer> return" ..
+      \ " | iunabbr <buffer> step" ..
+      \ " | iunabbr <buffer> switch" ..
+      \ " | iunabbr <buffer> sys" ..
+      \ " | iunabbr <buffer> this" ..
+      \ " | iunabbr <buffer> throw" ..
+      \ " | iunabbr <buffer> try" ..
+      \ " | iunabbr <buffer> to" ..
+      \ " | iunabbr <buffer> true" ..
+      \ " | iunabbr <buffer> until" ..
+      \ " | iunabbr <buffer> while" ..
+      \ " | iunabbr <buffer> repeat"
+
 if !exists("no_plugin_maps") && !exists("no_zimbu_maps")
   nnoremap <silent> <buffer> [[ m`:call ZimbuGoStartBlock()<CR>
   nnoremap <silent> <buffer> ]] m`:call ZimbuGoEndBlock()<CR>
+  let b:undo_ftplugin ..=
+	\ " | silent! exe 'nunmap <buffer> [['" ..
+	\ " | silent! exe 'nunmap <buffer> ]]'"
 endif
 
 " Using a function makes sure the search pattern is restored

runtime/indent/clojure.vim

@@ -1,11 +1,11 @@
 " Vim indent file
 " Language:           Clojure
-" Maintainer:         Alex Vear <av@axvr.io>
+" Maintainer:         Alex Vear <alex@vear.uk>
 " Former Maintainers: Sung Pae <self@sungpae.com>
 "                     Meikel Brandmeyer <mb@kotka.de>
 " URL:                https://github.com/clojure-vim/clojure.vim
 " License:            Vim (see :h license)
-" Last Change:        2021-02-13
+" Last Change:        2021-10-26
 
 if exists("b:did_indent")
 	finish
@@ -24,7 +24,7 @@ setlocal indentkeys=!,o,O
 if exists("*searchpairpos")
 
 	if !exists('g:clojure_maxlines')
-		let g:clojure_maxlines = 100
+		let g:clojure_maxlines = 300
 	endif
 
 	if !exists('g:clojure_fuzzy_indent')
@@ -71,14 +71,10 @@ if exists("*searchpairpos")
 		return s:current_char() =~# '\v[\(\)\[\]\{\}]' && !s:ignored_region()
 	endfunction
 
-	" Returns 1 if string matches a pattern in 'patterns', which may be a
-	" list of patterns, or a comma-delimited string of implicitly anchored
-	" patterns.
+	" Returns 1 if string matches a pattern in 'patterns', which should be
+	" a list of patterns.
 	function! s:match_one(patterns, string)
-		let list = type(a:patterns) == type([])
-		           \ ? a:patterns
-		           \ : map(split(a:patterns, ','), '"^" . v:val . "$"')
-		for pat in list
+		for pat in a:patterns
 			if a:string =~# pat | return 1 | endif
 		endfor
 	endfunction
@@ -215,9 +211,10 @@ if exists("*searchpairpos")
 	endfunction
 
 	" Check if form is a reader conditional, that is, it is prefixed by #?
-	" or @#?
+	" or #?@
 	function! s:is_reader_conditional_special_case(position)
 		return getline(a:position[0])[a:position[1] - 3 : a:position[1] - 2] == "#?"
+			\|| getline(a:position[0])[a:position[1] - 4 : a:position[1] - 2] == "#?@"
 	endfunction
 
 	" Returns 1 for opening brackets, -1 for _anything else_.

runtime/indent/dosbatch.vim

@@ -2,7 +2,7 @@
 " Language:	MSDOS batch file (with NT command extensions)
 " Maintainer:	Ken Takata
 " URL:		https://github.com/k-takata/vim-dosbatch-indent
-" Last Change:	2017 May 10
+" Last Change:	2021-10-18
 " Filenames:	*.bat
 " License:	VIM License
 
@@ -17,6 +17,8 @@ setlocal indentexpr=GetDosBatchIndent(v:lnum)
 setlocal indentkeys=!^F,o,O
 setlocal indentkeys+=0=)
 
+let b:undo_indent = "setl ai< inde< indk< si<"
+
 if exists("*GetDosBatchIndent")
   finish
 endif

runtime/indent/hamster.vim

@@ -1,8 +1,14 @@
 " Vim indent file
 " Language:    Hamster Script 
-" Version:     2.0.6.0
-" Last Change: Wed Nov 08 2006 12:02:42 PM
-" Maintainer:  David Fishburn <fishburn@ianywhere.com>
+" Version:     2.0.6.1
+" Last Change: 2021 Oct 11
+" Maintainer:  David Fishburn <dfishburn dot vim at gmail dot com>
+" Download: https://www.vim.org/scripts/script.php?script_id=1099
+"
+"    2.0.6.1 (Oct 2021)
+"        Added b:undo_indent
+"        Added cpo check
+"
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")
@@ -14,12 +20,17 @@ setlocal indentkeys+==~if,=~else,=~endif,=~endfor,=~endwhile
 setlocal indentkeys+==~do,=~until,=~while,=~repeat,=~for,=~loop
 setlocal indentkeys+==~sub,=~endsub
 
+let b:undo_indent = "setl indentkeys<"
+
 " Define the appropriate indent function but only once
 setlocal indentexpr=HamGetFreeIndent()
 if exists("*HamGetFreeIndent")
   finish
 endif
 
+let s:keepcpo = &cpo
+set cpo&vim
+
 function HamGetIndent(lnum)
   let ind = indent(a:lnum)
   let prevline=getline(a:lnum)
@@ -52,4 +63,8 @@ function HamGetFreeIndent()
   return ind
 endfunction
 
+" Restore:
+let &cpo = s:keepcpo
+unlet s:keepcpo
+
 " vim:sw=2 tw=80

runtime/indent/meson.vim

@@ -20,6 +20,8 @@ setlocal autoindent	" indentexpr isn't much help otherwise
 setlocal indentexpr=GetMesonIndent(v:lnum)
 setlocal indentkeys+==elif,=else,=endforeach,=endif,0)
 
+let b:undo_indent = "setl ai< inde< indk< lisp<"
+
 " Only define the function once.
 if exists("*GetMesonIndent")
   finish

runtime/indent/nsis.vim

@@ -2,7 +2,7 @@
 " Language:		NSIS script
 " Maintainer:		Ken Takata
 " URL:			https://github.com/k-takata/vim-nsis
-" Last Change:		2018-01-21
+" Last Change:		2021-10-18
 " Filenames:		*.nsi
 " License:		VIM License
 
@@ -17,6 +17,8 @@ setlocal indentexpr=GetNsisIndent(v:lnum)
 setlocal indentkeys=!^F,o,O
 setlocal indentkeys+==~${Else,=~${EndIf,=~${EndUnless,=~${AndIf,=~${AndUnless,=~${OrIf,=~${OrUnless,=~${Case,=~${Default,=~${EndSelect,=~${EndSwith,=~${Loop,=~${Next,=~${MementoSectionEnd,=~FunctionEnd,=~SectionEnd,=~SectionGroupEnd,=~PageExEnd,0=~!macroend,0=~!if,0=~!else,0=~!endif
 
+let b:undo_indent = "setl ai< inde< indk< si<"
+
 if exists("*GetNsisIndent")
   finish
 endif

runtime/indent/sqlanywhere.vim

@@ -1,9 +1,8 @@
 " Vim indent file
 " Language:    SQL
 " Maintainer:  David Fishburn <dfishburn dot vim at gmail dot com>
-" Last Change By Maintainer: 2017 Jun 13
-" Last Change: by Stephen Wall, #5578, 2020 Jun 07
-" Version:     3.0
+" Last Change: 2021 Oct 11
+" Version:     4.0
 " Download:    http://vim.sourceforge.net/script.php?script_id=495
 
 " Notes:
@@ -21,6 +20,9 @@
 "    it, this can leave the indent hanging to the right one too many.
 "
 " History:
+"    4.0 (Oct 2021)
+"        Added b:undo_indent
+"
 "    3.0 (Dec 2012)
 "        Added cpo check
 "
@@ -56,10 +58,13 @@ setlocal indentkeys+==~end,=~else,=~elseif,=~elsif,0=~when,0=)
 " in the indentkeys is typed
 setlocal indentexpr=GetSQLIndent()
 
+let b:undo_indent = "setl indentexpr< indentkeys<"
+
 " Only define the functions once.
 if exists("*GetSQLIndent")
     finish
 endif
+
 let s:keepcpo= &cpo
 set cpo&vim
 
@@ -68,14 +73,9 @@ set cpo&vim
 " IS is excluded, since it is difficult to determine when the
 " ending block is (especially for procedures/functions).
 let s:SQLBlockStart = '^\s*\%('.
-                \ 'if\>.*\<then\|'.
-                \ 'then\|else\>\|'.
-                \ 'elseif\>.*\<then\|'.
-                \ 'elsif\>.(\<then\|'.
-                \ 'while\>.*\<loop\|'.
-                \ 'for\>.*\<loop\|'.
-                \ 'foreach\>.*\<loop\|'. 
-                \ 'loop\|do\|declare\|begin\|'.
+                \ 'if\|else\|elseif\|elsif\|'.
+                \ 'while\|loop\|do\|for\|'.
+                \ 'begin\|'.
                 \ 'case\|when\|merge\|exception'.
                 \ '\)\>'
 let s:SQLBlockEnd = '^\s*\(end\)\>'

runtime/indent/tcsh.vim

@@ -1,7 +1,8 @@
 " Vim indent file
 " Language:		C-shell (tcsh)
-" Maintainer:		Doug Kearns <a@b.com> where a=dougkearns, b=gmail
-" Last Modified:	Sun 26 Sep 2021 12:38:38 PM EDT
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Gautam Iyer <gi1242+vim@NoSpam.com> where NoSpam=gmail (Original Author)
+" Last Change:		2021 Oct 15
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")
@@ -11,7 +12,9 @@ endif
 let b:did_indent = 1
 
 setlocal indentexpr=TcshGetIndent()
-setlocal indentkeys+=e,0=end,0=endsw indentkeys-=0{,0},0),:,0#
+setlocal indentkeys+=e,0=end
+setlocal indentkeys-=0{,0},0),:,0#
+
 let b:undo_indent = "setl inde< indk<"
 
 " Only define the function once.
@@ -40,9 +43,9 @@ function TcshGetIndent()
 	let ind = ind - shiftwidth()
     endif
 
-    " Subtract indent if current line has on end, endif, case commands
+    " Subtract indent if current line has on end, endif, endsw, case commands
     let line = getline(v:lnum)
-    if line =~ '\v^\s*%(else|end|endif)\s*$'
+    if line =~ '\v^\s*%(else|end|endif|endsw)\s*$'
 	let ind = ind - shiftwidth()
     endif
 

runtime/indent/teraterm.vim

@@ -3,7 +3,7 @@
 "		Based on Tera Term Version 4.100
 " Maintainer:	Ken Takata
 " URL:		https://github.com/k-takata/vim-teraterm
-" Last Change:	2018-08-31
+" Last Change:	2021-10-18
 " Filenames:	*.ttl
 " License:	VIM License
 
@@ -18,6 +18,8 @@ setlocal indentexpr=GetTeraTermIndent(v:lnum)
 setlocal indentkeys=!^F,o,O,e
 setlocal indentkeys+==elseif,=endif,=loop,=next,=enduntil,=endwhile
 
+let b:undo_indent = "setl ai< inde< indk< si<"
+
 if exists("*GetTeraTermIndent")
   finish
 endif

runtime/indent/vim.vim

@@ -1,7 +1,7 @@
 " Vim indent file
 " Language:	Vim script
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2021 Apr 18
+" Last Change:	2021 Nov 03
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")
@@ -107,7 +107,7 @@ function GetVimIndentIntern()
       if i >= 0
 	let ind += shiftwidth()
 	if strpart(prev_text, i, 1) == '|' && has('syntax_items')
-	      \ && synIDattr(synID(lnum, i, 1), "name") =~ '\(Comment\|String\)$'
+	      \ && synIDattr(synID(lnum, i, 1), "name") =~ '\(Comment\|String\|PatSep\)$'
 	  let ind -= shiftwidth()
 	endif
       endif

runtime/optwin.vim

@@ -1,7 +1,7 @@
 " These commands create the option window.
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2020 Oct 27
+" Last Change:	2021 Oct 28
 
 " If there already is an option window, jump to that one.
 let buf = bufnr('option-window')
@@ -652,6 +652,8 @@ if has("gui")
     endif
     call <SID>AddOption("guiheadroom", gettext("room (in pixels) left above/below the window"))
     call append("$", " \tset ghr=" . &ghr)
+    call <SID>AddOption("guiligatures", gettext("list of ASCII characters that can be combined into complex shapes"))
+    call <SID>OptionG("gli", &gli)
   endif
   if has("directx")
     call <SID>AddOption("renderoptions", gettext("options for text rendering"))
@@ -840,6 +842,9 @@ if has("insert_expand")
   call <SID>AddOption("thesaurus", gettext("list of thesaurus files for keyword completion"))
   call append("$", "\t" .. s:global_or_local)
   call <SID>OptionG("tsr", &tsr)
+  call <SID>AddOption("thesaurusfunc", gettext("function used for thesaurus completion"))
+  call append("$", "\t" .. s:global_or_local)
+  call <SID>OptionG("tsrfu", &tsrfu)
 endif
 call <SID>AddOption("infercase", gettext("adjust case of a keyword completion match"))
 call append("$", "\t" .. s:local_to_buffer)

runtime/pack/dist/opt/matchit/doc/matchit.txt

@@ -1,10 +1,10 @@
-*matchit.txt*   Extended "%" matching
+*matchit.txt*	Extended "%" matching
 
 For instructions on installing this file, type
 	`:help matchit-install`
 inside Vim.
 
-For Vim version 8.1.  Last change:  2021 May 17
+For Vim version 8.1.  Last change:  2021 Nov 13
 
 
 		  VIM REFERENCE MANUAL    by Benji Fisher et al

runtime/pack/dist/opt/termdebug/plugin/termdebug.vim

@@ -2,7 +2,7 @@
 "
 " Author: Bram Moolenaar
 " Copyright: Vim license applies, see ":help license"
-" Last Change: 2021 Aug 23
+" Last Change: 2021 Nov 21
 "
 " WORK IN PROGRESS - Only the basics work
 " Note: On MS-Windows you need a recent version of gdb.  The one included with
@@ -272,8 +272,9 @@ func s:StartDebug_term(dict)
     call term_sendkeys(s:gdbbuf, 'set args ' . join(proc_args) . "\r")
   endif
 
-  " Connect gdb to the communication pty, using the GDB/MI interface
-  call term_sendkeys(s:gdbbuf, 'new-ui mi ' . commpty . "\r")
+  " Connect gdb to the communication pty, using the GDB/MI interface.
+  " Prefix "server" to avoid adding this to the history.
+  call term_sendkeys(s:gdbbuf, 'server new-ui mi ' . commpty . "\r")
 
   " Wait for the response to show up, users may not notice the error and wonder
   " why the debugger doesn't work.
@@ -493,7 +494,7 @@ func TermDebugSendCommand(cmd)
     let do_continue = 0
     if !s:stopped
       let do_continue = 1
-      call s:SendCommand('-exec-interrupt')
+      Stop
       sleep 10m
     endif
     call term_sendkeys(s:gdbbuf, a:cmd . "\r")
@@ -534,7 +535,7 @@ func s:GdbOutCallback(channel, text)
   if a:text == '(gdb) ' || a:text == '^done' || a:text[0] == '&'
     return
   endif
-  if a:text =~ '^^error,msg='
+  if a:text =~ '^\^error,msg='
     let text = s:DecodeMessage(a:text[11:])
     if exists('s:evalexpr') && text =~ 'A syntax error in expression, near\|No symbol .* in current context'
       " Silently drop evaluation errors.
@@ -711,8 +712,8 @@ func s:HandleDisasmMsg(msg)
 
       let lnum = search('^' . s:asm_addr)
       if lnum != 0
-        exe 'sign unplace ' . s:asm_id
-        exe 'sign place ' . s:asm_id . ' line=' . lnum . ' name=debugPC'
+	exe 'sign unplace ' . s:asm_id
+	exe 'sign place ' . s:asm_id . ' line=' . lnum . ' name=debugPC'
       endif
 
       call win_gotoid(curwinid)
@@ -736,9 +737,9 @@ func s:HandleDisasmMsg(msg)
   else
     let value = substitute(a:msg, '^\~\"[ ]*', '', '')
     let value = substitute(value, '^=>[ ]*', '', '')
-    let value = substitute(value, '\\n\"
+    let value = substitute(value, '\\n\"\r$', '', '')
     let value = substitute(value, '\\n\"$', '', '')
-    let value = substitute(value, '\\n\"$', '', '')
+    let value = substitute(value, '\r', '', '')
     let value = substitute(value, '\\t', ' ', 'g')
 
     if value != '' || !empty(s:asm_lines)
@@ -762,7 +763,7 @@ func s:CommOutput(chan, msg)
     elseif msg != ''
       if msg =~ '^\(\*stopped\|\*running\|=thread-selected\)'
 	call s:HandleCursor(msg)
-      if msg =~ '^\(\*stopped\|\*running\|=thread-selected\)'
+      elseif msg =~ '^\^done,bkpt=' || msg =~ '^=breakpoint-created,' || msg =~ '^=breakpoint-modified,'
 	call s:HandleNewBreakpoint(msg)
       elseif msg =~ '^=breakpoint-deleted,'
 	call s:HandleBreakpointDelete(msg)
@@ -773,8 +774,8 @@ func s:CommOutput(chan, msg)
       elseif msg =~ '^\^error,msg='
 	call s:HandleError(msg)
       elseif msg =~ '^disassemble'
-	call s:HandleError(msg)
-      elseif msg =~ '^disassemble'
+	let s:parsing_disasm_msg = 1
+	let s:asm_lines = []
       endif
     endif
   endfor
@@ -802,12 +803,15 @@ func s:InstallCommands()
   command Finish call s:SendCommand('-exec-finish')
   command -nargs=* Run call s:Run(<q-args>)
   command -nargs=* Arguments call s:SendCommand('-exec-arguments ' . <q-args>)
-  command -nargs=* Run call s:Run(<q-args>)
 
-  command Stop call s:SendCommand('-exec-interrupt')
   if s:way == 'prompt'
+    command Stop call s:PromptInterrupt()
     command Continue call s:SendCommand('continue')
   else
+    command Stop call s:SendCommand('-exec-interrupt')
+    " using -exec-continue results in CTRL-C in the gdb window not working,
+    " communicating via commbuf (= use of SendCommand) has the same result
+    "command Continue  call s:SendCommand('-exec-continue')
     command Continue call term_sendkeys(s:gdbbuf, "continue\r")
   endif
 
@@ -930,20 +934,16 @@ func s:SetBreakpoint(at)
   let do_continue = 0
   if !s:stopped
     let do_continue = 1
-  if !s:stopped
-    let do_continue = 1
-    if s:way == 'prompt'
-      call s:PromptInterrupt()
-    else
+    Stop
     sleep 10m
   endif
 
   " Use the fname:lnum format, older gdb can't handle --source.
   let at = empty(a:at) ?
-  " Use the fname:lnum format, older gdb can't handle --source.
+	\ fnameescape(expand('%:p')) . ':' . line('.') : a:at
   call s:SendCommand('-break-insert ' . at)
   if do_continue
-  call s:SendCommand('-break-insert ' . at)
+    Continue
   endif
 endfunc
 
@@ -954,6 +954,7 @@ func s:ClearBreakpoint()
   let bploc = printf('%s:%d', fname, lnum)
   if has_key(s:breakpoint_locations, bploc)
     let idx = 0
+    let nr = 0
     for id in s:breakpoint_locations[bploc]
       if has_key(s:breakpoints, id)
 	" Assume this always works, the reply is simply "^done".
@@ -963,14 +964,22 @@ func s:ClearBreakpoint()
 	endfor
 	unlet s:breakpoints[id]
 	unlet s:breakpoint_locations[bploc][idx]
+	let nr = id
 	break
       else
 	let idx += 1
       endif
     endfor
-      endif
-    endfor
+    if nr != 0
+      if empty(s:breakpoint_locations[bploc])
+	unlet s:breakpoint_locations[bploc]
+      endif
+      echomsg 'Breakpoint ' . id . ' cleared from line ' . lnum . '.'
+    else
+      echoerr 'Internal error trying to remove breakpoint at line ' . lnum . '!'
     endif
+  else
+    echomsg 'No breakpoint to remove at line ' . lnum . '.'
   endif
 endfunc
 
@@ -982,27 +991,71 @@ func s:Run(args)
 endfunc
 
 func s:SendEval(expr)
-
-func s:SendEval(expr)
+  " check for "likely" boolean expressions, in which case we take it as lhs
+  if a:expr =~ "[=!<>]="
+    let exprLHS = a:expr
+  else
+    " remove text that is likely an assignment
+    let exprLHS = substitute(a:expr, ' *=.*', '', '')
+  endif
+  
+  " encoding expression to prevent bad errors
+  let expr = a:expr
+  let expr = substitute(expr, '\\', '\\\\', 'g')
+  let expr = substitute(expr, '"', '\\"', 'g')
+  call s:SendCommand('-data-evaluate-expression "' . expr . '"')
+  let s:evalexpr = exprLHS
 endfunc
 
-endfunc
+" :Evaluate - evaluate what is specified / under the cursor 
 func s:Evaluate(range, arg)
+  let expr = s:GetEvaluationExpression(a:range, a:arg)
+  let s:ignoreEvalError = 0
+  call s:SendEval(expr)
+endfunc
+
+" get what is specified / under the cursor 
+func s:GetEvaluationExpression(range, arg)
   if a:arg != ''
-func s:Evaluate(range, arg)
+    " user supplied evaluation
+    let expr = s:CleanupExpr(a:arg)
+    " DSW: replace "likely copy + paste" assignment
+    let expr = substitute(expr, '"\([^"]*\)": *', '\1=', 'g')
   elseif a:range == 2
+    " no evaluation but provided but range set
     let pos = getcurpos()
     let reg = getreg('v', 1, 1)
     let regt = getregtype('v')
     normal! gv"vy
-    let regt = getregtype('v')
+    let expr = s:CleanupExpr(@v)
     call setpos('.', pos)
     call setreg('v', reg, regt)
   else
+    " no evaluation provided: get from C-expression under cursor
+    " TODO: allow filetype specific lookup #9057
     let expr = expand('<cexpr>')
   endif
-    let expr = expand('<cexpr>')
-  endif
+  return expr
+endfunc
+
+" clean up expression that may got in because of range
+" (newlines and surrounding whitespace)
+func s:CleanupExpr(expr)
+  " replace all embedded newlines/tabs/...
+  let expr = substitute( a:expr, '\s', ' ', 'g')
+
+  if &filetype ==# 'cobol'
+    " extra cleanup for COBOL: _every: expression ends with a period,
+    " a semicolon nmay be used instead of a space
+    " a trailing comma is ignored as it commonly separates multiple expr
+    let expr = substitute(expr, '\..*', '', '')
+    let expr = substitute(expr, ';', ' ', 'g')
+    let expr = substitute(expr, ',*$', '', '')
+  endif
+
+  " get rid of surrounding spaces
+  let expr = substitute(expr, '^ *\(.*\) *', '\1', '')
+  return expr
 endfunc
 
 let s:ignoreEvalError = 0
@@ -1046,7 +1099,8 @@ func TermDebugBalloonExpr()
   let s:evalFromBalloonExpr = 1
   let s:evalFromBalloonExprResult = ''
   let s:ignoreEvalError = 1
-  let s:evalFromBalloonExprResult = ''
+  let expr = s:CleanupExpr(v:beval_text)
+  call s:SendEval(expr)
   return ''
 endfunc
 
@@ -1058,7 +1112,8 @@ func s:HandleError(msg)
     let s:evalFromBalloonExpr = 0
     return
   endif
-    return
+  let msgVal = substitute(a:msg, '.*msg="\(.*\)"', '\1', '')
+  echoerr substitute(msgVal, '\\"', '"', 'g')
 endfunc
 
 func s:GotoSourcewinOrCreateIt()
@@ -1083,6 +1138,7 @@ func s:GotoAsmwinOrCreateIt()
     setlocal number
     setlocal noswapfile
     setlocal buftype=nofile
+    setlocal modifiable
 
     let asmbuf = bufnr('Termdebug-asm-listing')
     if asmbuf > 0
@@ -1093,7 +1149,7 @@ func s:GotoAsmwinOrCreateIt()
 
     if exists('g:termdebug_disasm_window')
       if g:termdebug_disasm_window > 1
-    if exists('g:termdebug_disasm_window')
+	exe 'resize ' . g:termdebug_disasm_window
       endif
     endif
   endif
@@ -1102,7 +1158,7 @@ func s:GotoAsmwinOrCreateIt()
     let lnum = search('^' . s:asm_addr)
     if lnum == 0
       if s:stopped
-    if lnum == 0
+	call s:SendCommand('disassemble $pc')
       endif
     else
       exe 'sign unplace ' . s:asm_id
@@ -1137,15 +1193,15 @@ func s:HandleCursor(msg)
 
       let curwinid = win_getid(winnr())
       if win_gotoid(s:asmwin)
-      let curwinid = win_getid(winnr())
-      if win_gotoid(s:asmwin)
-        let lnum = search('^' . s:asm_addr)
-        if lnum == 0
-          call s:SendCommand('disassemble $pc')
-        else
-          exe 'sign unplace ' . s:asm_id
+	let lnum = search('^' . s:asm_addr)
+	if lnum == 0
+	  call s:SendCommand('disassemble $pc')
+	else
+	  exe 'sign unplace ' . s:asm_id
+	  exe 'sign place ' . s:asm_id . ' line=' . lnum . ' name=debugPC'
+	endif
 
-        endif
+	call win_gotoid(curwinid)
       endif
     endif
   endif
@@ -1165,6 +1221,7 @@ func s:HandleCursor(msg)
 	endif
       endif
       exe lnum
+      normal! zv
       exe 'sign unplace ' . s:pc_id
       exe 'sign place ' . s:pc_id . ' line=' . lnum . ' name=debugPC priority=110 file=' . fname
       if !exists('b:save_signcolumn')
@@ -1198,7 +1255,12 @@ endfunction
 " Will update the sign that shows the breakpoint
 func s:HandleNewBreakpoint(msg)
   if a:msg !~ 'fullname='
-func s:HandleNewBreakpoint(msg)
+    " a watch or a pending breakpoint does not have a file name
+    if a:msg =~ 'pending='
+      let nr = substitute(a:msg, '.*number=\"\([0-9.]*\)\".*', '\1', '')
+      let target = substitute(a:msg, '.*pending=\"\([^"]*\)\".*', '\1', '')
+      echomsg 'Breakpoint ' . nr . ' (' . target  . ') pending.'
+    endif
     return
   endif
   for msg in s:SplitMsg(a:msg)
@@ -1242,6 +1304,7 @@ func s:HandleNewBreakpoint(msg)
     if bufloaded(fname)
       call s:PlaceSign(id, subid, entry)
     endif
+    echomsg 'Breakpoint ' . nr . ' created at line ' . lnum . '.'
   endfor
 endfunc
 
@@ -1266,6 +1329,7 @@ func s:HandleBreakpointDelete(msg)
       endif
     endfor
     unlet s:breakpoints[id]
+    echomsg 'Breakpoint ' . id . ' cleared.'
   endif
 endfunc
 

runtime/plugin/zipPlugin.vim

@@ -20,7 +20,7 @@
 if &cp || exists("g:loaded_zipPlugin")
  finish
 endif
-let g:loaded_zipPlugin = "v31"
+let g:loaded_zipPlugin = "v32"
 let s:keepcpo          = &cpo
 set cpo&vim
 

runtime/scripts.vim

@@ -190,6 +190,14 @@ if s:line1 =~# "^#!"
   elseif s:name =~# 'fennel\>'
     set ft=fennel
 
+    " MikroTik RouterOS script
+  elseif s:name =~# 'rsc\>'
+    set ft=routeros
+
+    " Fish shell
+  elseif s:name =~# 'fish\>'
+    set ft=fish
+
   endif
   unlet s:name
 
@@ -390,6 +398,10 @@ else
   elseif s:line1 =~# '^%YAML'
     set ft=yaml
 
+  " MikroTik RouterOS script
+  elseif s:line1 =~# '^#.*by RouterOS.*$'
+    set ft=routeros
+
   " CVS diff
   else
     let s:lnum = 1

runtime/syntax/arduino.vim

@@ -1,50 +1,79 @@
 " Vim syntax file
 " Language:    Arduino
 " Maintainer:  Johannes Hoff <johannes@johanneshoff.com>
-" Last Change: 2011 June 3
+" Last Change: 21 October 2021
 " License:     VIM license (:help license, replace vim by arduino.vim)
 
 " Syntax highlighting like in the Arduino IDE
-" Keywords extracted from <arduino>/build/shared/lib/keywords.txt (arduino
-" version 0021)
+" Automatically generated by the script available at
+"    https://github.com/johshoff/arduino-vim-syntax
+" Using keywords from <arduino>/build/shared/lib/keywords.txt
+" From version: 1.8.16
 
-" Thanks to Rik, Erik Nomitch, Adam Obeng and Graeme Cross for helpful feedback!
+" Thanks to Rik, Erik Nomitch, Adam Obeng, Graeme Cross and Niall Parker
+" for helpful feedback!
 
-" quit when a syntax file was already loaded
-if exists("b:current_syntax")
+" For version 5.x: Clear all syntax items
+" For version 6.x: Quit when a syntax file was already loaded
+if version < 600
+  syntax clear
+elseif exists("b:current_syntax")
   finish
 endif
 
 " Read the C syntax to start with
-runtime! syntax/cpp.vim
+if version < 600
+  so <sfile>:p:h/cpp.vim
+else
+  runtime! syntax/cpp.vim
+endif
 
-syn keyword arduinoConstant HIGH LOW INPUT OUTPUT
-syn keyword arduinoConstant DEC BIN HEX OCT BYTE
-syn keyword arduinoConstant PI HALF_PI TWO_PI
-syn keyword arduinoConstant LSBFIRST MSBFIRST 
-syn keyword arduinoConstant CHANGE FALLING RISING 
-syn keyword arduinoConstant SERIAL DISPLAY
-syn keyword arduinoConstant DEFAULT EXTERNAL INTERNAL INTERNAL1V1 INTERNAL2V56
+syn keyword arduinoConstant  BIN CHANGE DEC DEFAULT EXTERNAL FALLING HALF_PI HEX
+syn keyword arduinoConstant  HIGH INPUT INPUT_PULLUP INTERNAL INTERNAL1V1
+syn keyword arduinoConstant  INTERNAL2V56 LED_BUILTIN LED_BUILTIN_RX
+syn keyword arduinoConstant  LED_BUILTIN_TX LOW LSBFIRST MSBFIRST OCT OUTPUT PI
+syn keyword arduinoConstant  RISING TWO_PI
 
-syn keyword arduinoStdFunc abs acos asin atan atan2 ceil constrain
-syn keyword arduinoStdFunc cos degrees exp floor log
-syn keyword arduinoStdFunc map max min pow radians 
-syn keyword arduinoStdFunc round sin sq sqrt tan
-syn keyword arduinoStdFunc randomSeed random
+syn keyword arduinoFunc      analogRead analogReadResolution analogReference
+syn keyword arduinoFunc      analogWrite analogWriteResolution attachInterrupt
+syn keyword arduinoFunc      bit bitClear bitRead bitSet bitWrite delay
+syn keyword arduinoFunc      delayMicroseconds detachInterrupt
+syn keyword arduinoFunc      digitalPinToInterrupt digitalRead digitalWrite
+syn keyword arduinoFunc      highByte interrupts lowByte micros millis
+syn keyword arduinoFunc      noInterrupts noTone pinMode pulseIn pulseInLong
+syn keyword arduinoFunc      shiftIn shiftOut tone yield
 
-syn keyword arduinoFunc analogReference analogRead analogWrite 
-syn keyword arduinoFunc attachInterrupt detachInterrupt interrupts noInterrupts 
-syn keyword arduinoFunc lowByte highByte bitRead bitWrite bitSet bitClear
-syn keyword arduinoFunc millis micros delay delayMicroseconds 
-syn keyword arduinoFunc pinMode digitalWrite digitalRead 
-syn keyword arduinoFunc tone noTone pulseIn shiftOut 
+syn keyword arduinoMethod    available availableForWrite begin charAt compareTo
+syn keyword arduinoMethod    concat end endsWith equals equalsIgnoreCase export
+syn keyword arduinoMethod    final find findUntil flush getBytes indexOf
+syn keyword arduinoMethod    lastIndexOf length loop override parseFloat
+syn keyword arduinoMethod    parseInt peek print println read readBytes
+syn keyword arduinoMethod    readBytesUntil readString readStringUntil replace
+syn keyword arduinoMethod    setCharAt setTimeout setup startsWith Stream
+syn keyword arduinoMethod    substring toCharArray toInt toLowerCase toUpperCase
+syn keyword arduinoMethod    trim
 
-syn keyword arduinoMethod setup loop
-syn keyword arduinoMethod begin end available read flush print println write peek
+syn keyword arduinoModule    Keyboard Mouse Serial Serial1 Serial2 Serial3
+syn keyword arduinoModule    SerialUSB
 
-syn keyword arduinoType boolean byte word String 
+syn keyword arduinoStdFunc   abs accept acos acosf asin asinf atan atan2 atan2f
+syn keyword arduinoStdFunc   atanf cbrt cbrtf ceil ceilf click constrain
+syn keyword arduinoStdFunc   copysign copysignf cos cosf cosh coshf degrees exp
+syn keyword arduinoStdFunc   expf fabs fabsf fdim fdimf floor floorf fma fmaf
+syn keyword arduinoStdFunc   fmax fmaxf fmin fminf fmod fmodf hypot hypotf
+syn keyword arduinoStdFunc   isfinite isinf isnan isPressed ldexp ldexpf log
+syn keyword arduinoStdFunc   log10 log10f logf lrint lrintf lround lroundf map
+syn keyword arduinoStdFunc   max min move pow powf press radians random
+syn keyword arduinoStdFunc   randomSeed release releaseAll round roundf signbit
+syn keyword arduinoStdFunc   sin sinf sinh sinhf sq sqrt sqrtf tan tanf tanh
+syn keyword arduinoStdFunc   tanhf trunc truncf
 
-syn keyword arduinoModule Serial Serial1 Serial2 Serial3
+syn keyword arduinoType      _Bool _Complex _Imaginary array atomic_bool
+syn keyword arduinoType      atomic_char atomic_int atomic_llong atomic_long
+syn keyword arduinoType      atomic_schar atomic_short atomic_uchar atomic_uint
+syn keyword arduinoType      atomic_ullong atomic_ulong atomic_ushort boolean
+syn keyword arduinoType      byte char16_t char32_t complex NULL null PROGMEM
+syn keyword arduinoType      String word
 
 hi def link arduinoType Type
 hi def link arduinoConstant Constant

runtime/syntax/autoit.vim

@@ -5,6 +5,7 @@
 " Authored By:	Riccardo Casini <ric@libero.it>
 " Script URL:	http://www.vim.org/scripts/script.php?script_id=1239
 " ChangeLog:	Please visit the script URL for detailed change information
+" 		Included change from #970.
 
 " Quit when a syntax file was already loaded.
 if exists("b:current_syntax")
@@ -932,7 +933,7 @@ syn match autoitConst "\$SD_POWERDOWN"
 " constants - string
 syn match autoitConst "\$STR_NOCASESENSE"
 syn match autoitConst "\$STR_CASESENSE"
-syn match autoitConst "\STR_STRIPLEADING"
+syn match autoitConst "\$STR_STRIPLEADING"
 syn match autoitConst "\$STR_STRIPTRAILING"
 syn match autoitConst "\$STR_STRIPSPACES"
 syn match autoitConst "\$STR_STRIPALL"

runtime/syntax/css.vim

@@ -2,12 +2,12 @@
 " Language:     Cascading Style Sheets
 " Previous Contributor List:
 "               Jules Wang      <w.jq0722@gmail.com>
-"               Claudio Fleiner <claudio@fleiner.com> (Maintainer)
+"               Claudio Fleiner <claudio@fleiner.com>
 "               Yeti            (Add full CSS2, HTML4 support)
 "               Nikolai Weibull (Add CSS2 support)
-" URL:          https://github.com/jsit/css.vim
+" URL:          https://github.com/vim-language-dept/css-syntax.vim
 " Maintainer:   Jay Sitter <jay@jaysitter.com>
-" Last Change:  2019 Jul. 29
+" Last Change:  2021 Oct 15
 
 " quit when a syntax file was already loaded
 if !exists("main_syntax")
@@ -23,6 +23,8 @@ let s:cpo_save = &cpo
 set cpo&vim
 
 syn case ignore
+" Add dash to allowed keyword characters.
+syn iskeyword @,48-57,_,192-255,-
 
 " HTML4 tags
 syn keyword cssTagName abbr address area a b base
@@ -32,7 +34,7 @@ syn keyword cssTagName dfn div dl dt em fieldset form
 syn keyword cssTagName h1 h2 h3 h4 h5 h6 head hr html img i
 syn keyword cssTagName iframe input ins isindex kbd label legend li
 syn keyword cssTagName link map menu meta noscript ol optgroup
-syn keyword cssTagName option p param pre q s samp script small
+syn keyword cssTagName option p param picture pre q s samp script small
 syn keyword cssTagName span strong sub sup tbody td
 syn keyword cssTagName textarea tfoot th thead title tr ul u var
 syn keyword cssTagName object svg
@@ -127,7 +129,7 @@ syn region cssURL contained matchgroup=cssFunctionName start="\<\(uri\|url\|loca
 syn region cssFunction contained matchgroup=cssFunctionName start="\<\(var\|calc\)\s*(" end=")" contains=cssCustomProp,cssValue.*,cssFunction,cssColor,cssStringQ,cssStringQQ oneline
 syn region cssFunction contained matchgroup=cssFunctionName start="\<\(rgb\|clip\|attr\|counter\|rect\|cubic-bezier\|steps\)\s*(" end=")" oneline  contains=cssValueInteger,cssValueNumber,cssValueLength,cssFunctionComma
 syn region cssFunction contained matchgroup=cssFunctionName start="\<\(rgba\|hsl\|hsla\|color-stop\|from\|to\)\s*(" end=")" oneline  contains=cssColor,cssValueInteger,cssValueNumber,cssValueLength,cssFunctionComma,cssFunction
-syn region cssFunction contained matchgroup=cssFunctionName start="\<\(linear-\|radial-\)\=\gradient\s*(" end=")" oneline  contains=cssColor,cssValueInteger,cssValueNumber,cssValueLength,cssFunction,cssGradientAttr,cssFunctionComma
+syn region cssFunction contained matchgroup=cssFunctionName start="\<\(linear-\|radial-\|conic-\)\=\gradient\s*(" end=")" oneline  contains=cssColor,cssValueInteger,cssValueNumber,cssValueLength,cssFunction,cssGradientAttr,cssFunctionComma
 syn region cssFunction contained matchgroup=cssFunctionName start="\<\(matrix\(3d\)\=\|scale\(3d\|X\|Y\|Z\)\=\|translate\(3d\|X\|Y\|Z\)\=\|skew\(X\|Y\)\=\|rotate\(3d\|X\|Y\|Z\)\=\|perspective\)\s*(" end=")" oneline contains=cssValueInteger,cssValueNumber,cssValueLength,cssValueAngle,cssFunctionComma
 syn region cssFunction contained matchgroup=cssFunctionName start="\<\(blur\|brightness\|contrast\|drop-shadow\|grayscale\|hue-rotate\|invert\|opacity\|saturate\|sepia\)\s*(" end=")" oneline contains=cssValueInteger,cssValueNumber,cssValueLength,cssValueAngle,cssFunctionComma
 syn keyword cssGradientAttr contained top bottom left right cover center middle ellipse at
@@ -220,7 +222,7 @@ syn keyword cssFlexibleBoxProp contained order
 syn match cssFlexibleBoxAttr contained "\<\(row\|column\|wrap\)\(-reverse\)\=\>"
 syn keyword cssFlexibleBoxAttr contained nowrap stretch baseline center
 syn match cssFlexibleBoxAttr contained "\<flex\(-\(start\|end\)\)\=\>"
-syn match cssFlexibleBoxAttr contained "\<space\(-\(between\|around\)\)\=\>"
+syn match cssFlexibleBoxAttr contained "\<space\(-\(between\|around\|evenly\)\)\=\>"
 
 " CSS Fonts Module Level 3
 " http://www.w3.org/TR/css-fonts-3/
@@ -234,9 +236,7 @@ syn keyword cssFontAttr contained larger smaller
 syn match cssFontAttr contained "\<\(x\{1,2\}-\)\=\(large\|small\)\>"
 syn match cssFontAttr contained "\<small-\(caps\|caption\)\>"
 " font-family attributes
-syn match cssFontAttr contained "\<\(sans-\)\=serif\>"
-syn keyword cssFontAttr contained Antiqua Arial Black Book Charcoal Comic Courier Dingbats Gadget Geneva Georgia Grande Helvetica Impact Linotype Lucida MS Monaco Neue New Palatino Roboto Roman Symbol Tahoma Times Trebuchet Verdana Webdings Wingdings York Zapf
-syn keyword cssFontAttr contained cursive fantasy monospace
+syn keyword cssFontAttr contained sans-serif serif cursive fantasy monospace
 " font-feature-settings attributes
 syn keyword cssFontAttr contained on off
 " font-stretch attributes
@@ -283,6 +283,7 @@ syn match cssGridProp contained "\<grid\>"
 syn match cssGridProp contained "\<grid-template\(-\(columns\|rows\|areas\)\)\=\>"
 syn match cssGridProp contained "\<grid-\(column\|row\)\(-\(start\|end\|gap\)\)\=\>"
 syn match cssGridProp contained "\<grid-\(area\|gap\)\>"
+syn match cssGridProp contained "\<gap\>"
 syn match cssGridProp contained "\<grid-auto-\(flow\|rows\|columns\)\>"
 
 syn match cssHyerlinkProp contained "\<target\(-\(name\|new\|position\)\)\=\>"
@@ -294,6 +295,10 @@ syn match cssListAttr contained "\<\(decimal\(-leading-zero\)\=\|cjk-ideographic
 syn keyword cssListAttr contained disc circle square hebrew armenian georgian
 syn keyword cssListAttr contained inside outside
 
+" object-fit https://www.w3.org/TR/css-images-3/#the-object-fit
+syn match cssObjectProp contained "\<object-\(fit\|position\)\>"
+syn keyword cssObjectAttr contained fill contain cover scale-down
+
 syn keyword cssPositioningProp contained bottom clear clip display float left
 syn keyword cssPositioningProp contained position right top visibility
 syn match cssPositioningProp contained "\<z-index\>"
@@ -303,7 +308,7 @@ syn keyword cssPositioningAttr contained left right both
 syn match cssPositioningAttr contained "\<list-item\>"
 syn match cssPositioningAttr contained "\<inline\(-\(block\|box\|table\|grid\|flex\)\)\=\>"
 syn match cssPositioningAttr contained "\<flow\(-root\)\=\>"
-syn keyword cssPositioningAttr contained static relative absolute fixed subgrid
+syn keyword cssPositioningAttr contained static relative absolute fixed subgrid sticky
 
 syn keyword cssPrintAttr contained landscape portrait crop cross always
 
@@ -548,6 +553,7 @@ hi def link cssMarqueeProp cssProp
 hi def link cssMultiColumnProp cssProp
 hi def link cssPagedMediaProp cssProp
 hi def link cssPositioningProp cssProp
+hi def link cssObjectProp cssProp
 hi def link cssPrintProp cssProp
 hi def link cssRubyProp cssProp
 hi def link cssSpeechProp cssProp
@@ -581,6 +587,7 @@ hi def link cssMultiColumnAttr cssAttr
 hi def link cssPaddingAttr cssAttr
 hi def link cssPagedMediaAttr cssAttr
 hi def link cssPositioningAttr cssAttr
+hi def link cssObjectAttr cssAttr
 hi def link cssGradientAttr cssAttr
 hi def link cssPrintAttr cssAttr
 hi def link cssRubyAttr cssAttr

runtime/syntax/debchangelog.vim

@@ -3,7 +3,7 @@
 " Maintainer:  Debian Vim Maintainers
 " Former Maintainers: Gerfried Fuchs <alfie@ist.org>
 "                     Wichert Akkerman <wakkerma@debian.org>
-" Last Change: 2021 Aug 03
+" Last Change: 2021 Oct 19
 " URL: https://salsa.debian.org/vim-team/vim-debian/blob/master/syntax/debchangelog.vim
 
 " Standard syntax initialization
@@ -24,7 +24,8 @@ let s:supported = [
       \ 'jessie', 'stretch', 'buster', 'bullseye', 'bookworm',
       \ 'trixie', 'sid', 'rc-buggy',
       \
-      \ 'trusty', 'xenial', 'bionic', 'focal', 'hirsute', 'impish', 'devel'
+      \ 'trusty', 'xenial', 'bionic', 'focal', 'hirsute', 'impish', 'jammy',
+      \ 'devel'
       \ ]
 let s:unsupported = [
       \ 'frozen', 'buzz', 'rex', 'bo', 'hamm', 'slink', 'potato',

runtime/syntax/debsources.vim

@@ -2,7 +2,7 @@
 " Language:     Debian sources.list
 " Maintainer:   Debian Vim Maintainers
 " Former Maintainer: Matthijs Mohlmann <matthijs@cacholong.nl>
-" Last Change: 2021 Aug 03
+" Last Change: 2021 Oct 19
 " URL: https://salsa.debian.org/vim-team/vim-debian/blob/master/syntax/debsources.vim
 
 " Standard syntax initialization
@@ -26,7 +26,8 @@ let s:supported = [
       \ 'jessie', 'stretch', 'buster', 'bullseye', 'bookworm',
       \ 'trixie', 'sid', 'rc-buggy',
       \
-      \ 'trusty', 'xenial', 'bionic', 'focal', 'hirsute', 'impish', 'devel'
+      \ 'trusty', 'xenial', 'bionic', 'focal', 'hirsute', 'impish', 'jammy',
+      \ 'devel'
       \ ]
 let s:unsupported = [
       \ 'buzz', 'rex', 'bo', 'hamm', 'slink', 'potato',

runtime/syntax/gdb.vim

@@ -2,7 +2,8 @@
 " Language:	GDB command files
 " Maintainer:	Claudio Fleiner <claudio@fleiner.com>
 " URL:		http://www.fleiner.com/vim/syntax/gdb.vim
-" Last Change:	2012 Oct 05
+" Last Change:	2021 Nov 15
+" 		Additional changes by Simon Sobisch
 
 " quit when a syntax file was already loaded
 if exists("b:current_syntax")
@@ -21,19 +22,19 @@ syn match gdbInfo contained "all-registers"
 
 
 syn keyword gdbStatement contained actions apply attach awatch backtrace break bt call catch cd clear collect commands
-syn keyword gdbStatement contained complete condition continue delete detach directory disable disassemble display down
+syn keyword gdbStatement contained complete condition continue delete detach directory disable disas[semble] disp[lay] down
 syn keyword gdbStatement contained echo else enable end file finish frame handle hbreak help if ignore
 syn keyword gdbStatement contained inspect jump kill list load maintenance make next nexti ni output overlay
-syn keyword gdbStatement contained passcount path print printf ptype pwd quit rbreak remote return run rwatch
-syn keyword gdbStatement contained search section set sharedlibrary shell show si signal source step stepi stepping
+syn keyword gdbStatement contained passcount path print printf ptype python pwd quit rbreak remote return run rwatch
+syn keyword gdbStatement contained search section set sharedlibrary shell show si signal skip source step stepi stepping
 syn keyword gdbStatement contained stop target tbreak tdump tfind thbreak thread tp trace tstart tstatus tstop
-syn keyword gdbStatement contained tty undisplay unset until up watch whatis where while ws x
+syn keyword gdbStatement contained tty und[isplay] unset until up watch whatis where while ws x
 syn match gdbFuncDef "\<define\>.*"
 syn match gdbStatmentContainer "^\s*\S\+" contains=gdbStatement,gdbFuncDef
 syn match gdbStatement "^\s*info" nextgroup=gdbInfo skipwhite skipempty
 
 " some commonly used abbreviations
-syn keyword gdbStatement c disp undisp disas p
+syn keyword gdbStatement c cont p py
 
 syn region gdbDocument matchgroup=gdbFuncDef start="\<document\>.*$" matchgroup=gdbFuncDef end="^end\s*$"
 

runtime/syntax/gnuplot.vim

@@ -3,7 +3,8 @@
 " Maintainer:	Josh Wainwright <wainwright DOT ja AT gmail DOT com>
 " Last Maintainer:	Andrew Rasmussen andyras@users.sourceforge.net
 " Original Maintainer:	John Hoelzel johnh51@users.sourceforge.net
-" Last Change:	2020 May 12
+" Last Change:	2021 Nov 16
+" 		additional changes from PR #8949
 " Filenames:	*.gnu *.plt *.gpi *.gih *.gp *.gnuplot scripts: #!*gnuplot
 " URL:		http://www.vim.org/scripts/script.php?script_id=4873
 " Original URL:	http://johnh51.get.to/vim/syntax/gnuplot.vim
@@ -32,22 +33,22 @@ syn match gnuplotSpecial	"\\." contained
 " syn match gnuplotSpecial	"\\\o\o\o\|\\x\x\x\|\\c[^"]\|\\[a-z\\]" contained
 
 " measurements in the units in, cm and pt are special
-syn match gnuplotUnit		"[0-9]+in"
-syn match gnuplotUnit		"[0-9]+cm"
-syn match gnuplotUnit		"[0-9]+pt"
+syn match gnuplotUnit		"\d+in"
+syn match gnuplotUnit		"\d+cm"
+syn match gnuplotUnit		"\d+pt"
 
 " external (shell) commands are special
-syn region gnuplotExternal	start="!" end="$"
+syn region gnuplotExternal	start="^\s*!" end="$"
 
 " ---- Comments ---- "
 
-syn region gnuplotComment	start="#" end="$" contains=gnuplotTodo
+syn region gnuplotComment	start="#" end="$" contains=gnuplotTodo,@Spell
 
 " ---- Constants ---- "
 
 " strings
-syn region gnuplotString	start=+"+ skip=+\\"+ end=+"+ contains=gnuplotSpecial
-syn region gnuplotString	start="'" end="'"
+syn region gnuplotString	start=+"+ skip=+\\"+ end=+"+ contains=gnuplotSpecial,@Spell
+syn region gnuplotString	start="'" end="'" contains=@Spell
 
 " built-in variables
 syn keyword gnuplotNumber	GNUTERM GPVAL_TERM GPVAL_TERMOPTIONS GPVAL_SPLOT
@@ -76,7 +77,7 @@ syn keyword gnuplotNumber	GPVAL_TERM_YSIZE GPVAL_VIEW_MAP GPVAL_VIEW_ROT_X
 syn keyword gnuplotNumber	GPVAL_VIEW_ROT_Z GPVAL_VIEW_SCALE
 
 " function name variables
-syn match gnuplotNumber		"GPFUN_[a-zA-Z_]*"
+syn match gnuplotNumber		"GPFUN_\h*"
 
 " stats variables
 syn keyword gnuplotNumber	STATS_records STATS_outofrange STATS_invalid
@@ -104,23 +105,23 @@ syn keyword gnuplotError	FIT_LAMBDA_FACTOR FIT_LOG FIT_SCRIPT
 
 " integer number, or floating point number without a dot and with "f".
 syn case    ignore
-syn match   gnuplotNumber	"\<[0-9]\+\(u\=l\=\|lu\|f\)\>"
+syn match   gnuplotNumber	"\<\d\+\(u\=l\=\|lu\|f\)\>"
 
 " floating point number, with dot, optional exponent
-syn match   gnuplotFloat	"\<[0-9]\+\.[0-9]*\(e[-+]\=[0-9]\+\)\=[fl]\=\>"
+syn match   gnuplotFloat	"\<\d\+\.\d*\(e[-+]\=\d\+\)\=[fl]\=\>"
 
 " floating point number, starting with a dot, optional exponent
-syn match   gnuplotFloat	"\.[0-9]\+\(e[-+]\=[0-9]\+\)\=[fl]\=\>"
+syn match   gnuplotFloat	"\.\d\+\(e[-+]\=\d\+\)\=[fl]\=\>"
 
 " floating point number, without dot, with exponent
-syn match   gnuplotFloat	"\<[0-9]\+e[-+]\=[0-9]\+[fl]\=\>"
+syn match   gnuplotFloat	"\<\d\+e[-+]\=\d\+[fl]\=\>"
 
 " hex number
-syn match   gnuplotNumber	"\<0x[0-9a-f]\+\(u\=l\=\|lu\)\>"
+syn match   gnuplotNumber	"\<0x\x\+\(u\=l\=\|lu\)\>"
 syn case    match
 
 " flag an octal number with wrong digits by not highlighting
-syn match   gnuplotOctalError	"\<0[0-7]*[89]"
+syn match   gnuplotOctalError	"\<0\o*[89]"
 
 " ---- Identifiers: Functions ---- "
 
@@ -374,8 +375,8 @@ syn keyword gnuplotKeyword	nohead nooutliers nowedge off opaque outliers
 syn keyword gnuplotKeyword	palette pattern pi pointinterval pointsize
 syn keyword gnuplotKeyword	pointtype ps pt radius range rectangle
 syn keyword gnuplotKeyword	rowstacked screen separation size solid sorted
-syn keyword gnuplotKeyword	textbox transparent units unsorted userstyles
-syn keyword gnuplotKeyword	wedge x x2 xx xy yy
+syn keyword gnuplotKeyword	textbox units unsorted userstyles wedge
+syn keyword gnuplotKeyword	x x2 xx xy yy
 " set surface
 syn keyword gnuplotKeyword	surface implicit explicit
 " set table
@@ -477,9 +478,13 @@ syn keyword gnuplotKeyword	nooutput
 " keywords for 'test' command
 syn keyword gnuplotKeyword	terminal palette rgb rbg grb gbr brg bgr
 
+" The transparent gnuplot keyword cannot use 'syn keyword' as transparent
+" has a special meaning in :syntax commands.
+syn match gnuplotKeyword	"\<transparent\>"
+
 " ---- Macros ---- "
 
-syn match gnuplotMacro		"@[a-zA-Z0-9_]*"
+syn match gnuplotMacro		"@\w*"
 
 " ---- Todos ---- "
 

runtime/syntax/help_ru.vim

@@ -1,12 +1,12 @@
 " Vim syntax file
 " Language:     Russian Vim program help files *.rux
-" Maintainer:   Restorer (restorers@users.sourceforge.net)
+" Maintainer:   Restorer (restorers@users.sourceforge.net DEFUNCT)
 " Last Change:  04 Aprl 2017
 " 
 
 " Проверяем язык локали и установки опции 'helplang'
 " Если не русский, то выходим из скрипта.
-if ('ru' !~? v:lang || 'russian' !~? v:lang) && 'ru' !~? &helplang
+if (v:lang !~? 'ru' || v:lang !~? 'russian') && &helplang !~? 'ru'
   finish
 endif
 

runtime/syntax/indent.vim

@@ -1,7 +1,8 @@
 " Vim syntax file
-" Language:             indent(1) configuration file
-" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2010-01-23
+" Language:		indent(1) configuration file
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
+" Last Change:		2021 Nov 17
 "   indent_is_bsd:      If exists, will change somewhat to match BSD implementation
 "
 " TODO:     is the deny-all (a la lilo.vim nice or no?)...
@@ -27,7 +28,7 @@ syn region  indentComment start='//' skip='\\$' end='$'
                           \ contains=indentTodo,@Spell
 
 if !exists("indent_is_bsd")
-  syn match indentOptions '-i\|--indentation-level\|-il\|--indent-level'
+  syn match indentOptions '-i\|--indent-level\|-il\|--indent-label'
                         \ nextgroup=indentNumber skipwhite skipempty
 endif
 syn match   indentOptions '-\%(bli\|c\%([bl]i\|[dip]\)\=\|di\=\|ip\=\|lc\=\|pp\=i\|sbi\|ts\|-\%(brace-indent\|comment-indentation\|case-brace-indentation\|declaration-comment-column\|continuation-indentation\|case-indentation\|else-endif-column\|line-comments-indentation\|declaration-indentation\|indent-level\|parameter-indentation\|line-length\|comment-line-length\|paren-indentation\|preprocessor-indentation\|struct-brace-indentation\|tab-size\)\)'

runtime/syntax/lisp.vim

@@ -1,8 +1,8 @@
 " Vim syntax file
 " Language:    Lisp
 " Maintainer:  Charles E. Campbell <NcampObell@SdrPchip.AorgM-NOSPAM>
-" Last Change: Jul 11, 2019
-" Version:     30
+" Last Change: Nov 10, 2021
+" Version:     31
 " URL:	http://www.drchip.org/astronaut/vim/index.html#SYNTAX_LISP
 "
 "  Thanks to F Xavier Noria for a list of 978 Common Lisp symbols taken from HyperSpec
@@ -54,20 +54,20 @@ if exists("g:lisp_rainbow") && g:lisp_rainbow != 0
  syn region lispParen8 contained matchgroup=hlLevel8 start="`\=(" end=")" skip="|.\{-}|" contains=@lispListCluster,lispParen9
  syn region lispParen9 contained matchgroup=hlLevel9 start="`\=(" end=")" skip="|.\{-}|" contains=@lispListCluster,lispParen0
 else
- syn region lispList			matchgroup=lispParen start="("   skip="|.\{-}|"			matchgroup=lispParen end=")"	contains=@lispListCluster
- syn region lispBQList			matchgroup=PreProc   start="`("  skip="|.\{-}|"			matchgroup=PreProc   end=")"		contains=@lispListCluster
+ syn region lispList		matchgroup=lispParen start="("   skip="|.\{-}|"		matchgroup=lispParen end=")"	contains=@lispListCluster
+ syn region lispBQList		matchgroup=PreProc   start="`("  skip="|.\{-}|"		matchgroup=PreProc   end=")"	contains=@lispListCluster
 endif
 
 " ---------------------------------------------------------------------
 " Atoms: {{{1
-syn match lispAtomMark			"'"
-syn match lispAtom			"'("me=e-1			contains=lispAtomMark	nextgroup=lispAtomList
-syn match lispAtom			"'[^ \t()]\+"			contains=lispAtomMark
-syn match lispAtomBarSymbol		!'|..\{-}|!			contains=lispAtomMark
-syn region lispAtom			start=+'"+			skip=+\\"+ end=+"+
-syn region lispAtomList			contained			matchgroup=Special start="("	skip="|.\{-}|" matchgroup=Special end=")"	contains=@lispAtomCluster,lispString,lispEscapeSpecial
-syn match lispAtomNmbr			contained			"\<\d\+"
-syn match lispLeadWhite			contained			"^\s\+"
+syn match lispAtomMark		"'"
+syn match lispAtom		"'("me=e-1			contains=lispAtomMark	nextgroup=lispAtomList
+syn match lispAtom		"'[^ \t()]\+"			contains=lispAtomMark
+syn match lispAtomBarSymbol	!'|..\{-}|!			contains=lispAtomMark
+syn region lispAtom		start=+'"+			skip=+\\"+ end=+"+
+syn region lispAtomList		contained			matchgroup=Special start="("	skip="|.\{-}|" matchgroup=Special end=")"	contains=@lispAtomCluster,lispString,lispEscapeSpecial
+syn match lispAtomNmbr		contained			"\<\d\+"
+syn match lispLeadWhite		contained			"^\s\+"
 
 " ---------------------------------------------------------------------
 " Standard Lisp Functions and Macros: {{{1
@@ -553,6 +553,8 @@ syn match lispParenError	")"
 syn cluster lispCommentGroup	contains=lispTodo,@Spell
 syn match   lispComment		";.*$"				contains=@lispCommentGroup
 syn region  lispCommentRegion	start="#|" end="|#"		contains=lispCommentRegion,@lispCommentGroup
+syn region  lispComment		start="#+nil"	end="\ze)"	contains=@lispCommentGroup
+syn match   lispComment		'^\s*#+nil.*$'			contains=@lispCommentGroup
 syn keyword lispTodo		contained			combak			combak:			todo			todo:
 
 " ---------------------------------------------------------------------

runtime/syntax/meson.vim

@@ -3,7 +3,7 @@
 " License:	VIM License
 " Maintainer:	Nirbheek Chauhan <nirbheek.chauhan@gmail.com>
 "		Liam Beguin <liambeguin@gmail.com>
-" Last Change:	2019 Oct 18
+" Last Change:	2021 Aug 16
 " Credits:	Zvezdan Petkovic <zpetkovic@acm.org>
 "		Neil Schemenauer <nas@meson.ca>
 "		Dmitry Vasiliev
@@ -56,9 +56,11 @@ syn match   mesonEscape	"\\$"
 " Meson only supports integer numbers
 " http://mesonbuild.com/Syntax.html#numbers
 syn match   mesonNumber	"\<\d\+\>"
+syn match   mesonNumber	"\<0x\x\+\>"
+syn match   mesonNumber	"\<0o\o\+\>"
 
 " booleans
-syn keyword mesonConstant	false true
+syn keyword mesonBoolean	false true
 
 " Built-in functions
 syn keyword mesonBuiltin
@@ -97,6 +99,7 @@ syn keyword mesonBuiltin
   \ install_headers
   \ install_man
   \ install_subdir
+  \ install_emptydir
   \ is_disabler
   \ is_variable
   \ jar
@@ -118,6 +121,7 @@ syn keyword mesonBuiltin
   \ summary
   \ target_machine
   \ test
+  \ unset_variable
   \ vcs_tag
   \ warning
   \ range
@@ -133,15 +137,15 @@ endif
 " The default highlight links.  Can be overridden later.
 hi def link mesonStatement	Statement
 hi def link mesonConditional	Conditional
-hi def link mesonRepeat	Repeat
+hi def link mesonRepeat		Repeat
 hi def link mesonOperator	Operator
 hi def link mesonComment	Comment
 hi def link mesonTodo		Todo
-hi def link mesonString	String
-hi def link mesonEscape	Special
-hi def link mesonNumber	Number
+hi def link mesonString		String
+hi def link mesonEscape		Special
+hi def link mesonNumber		Number
 hi def link mesonBuiltin	Function
-hi def link mesonConstant	Number
+hi def link mesonBoolean	Boolean
 if exists("meson_space_error_higlight")
   hi def link mesonSpaceError	Error
 endif

runtime/syntax/nsis.vim

@@ -1,9 +1,9 @@
 " Vim syntax file
-" Language:		NSIS script, for version of NSIS 3.03 and later
+" Language:		NSIS script, for version of NSIS 3.08 and later
 " Maintainer:		Ken Takata
 " URL:			https://github.com/k-takata/vim-nsis
 " Previous Maintainer:	Alex Jakushev <Alex.Jakushev@kemek.lt>
-" Last Change:		2018-10-02
+" Last Change:		2020-10-18
 
 " quit when a syntax file was already loaded
 if exists("b:current_syntax")
@@ -97,6 +97,8 @@ syn match nsisSysVar		"$RESOURCES_LOCALIZED"
 syn match nsisSysVar		"$CDBURN_AREA"
 syn match nsisSysVar		"$HWNDPARENT"
 syn match nsisSysVar		"$PLUGINSDIR"
+syn match nsisSysVar		"$\%(USERTEMPLATES\|USERSTARTMENU\|USERSMPROGRAMS\|USERDESKTOP\)"
+syn match nsisSysVar		"$\%(COMMONTEMPLATES\|COMMONSTARTMENU\|COMMONSMPROGRAMS\|COMMONDESKTOP\|COMMONPROGRAMDATA\)"
 syn match nsisSysVar		"$\\r"
 syn match nsisSysVar		"$\\n"
 syn match nsisSysVar		"$\\t"
@@ -149,7 +151,7 @@ syn keyword nsisStatement	contained Section nextgroup=nsisSectionOpt skipwhite
 syn region nsisSectionOpt	contained start="" end="$" transparent keepend contains=@nsisAnyOpt,nsisSectionKwd
 syn match nsisSectionKwd	contained "/o\>"
 
-syn keyword nsisStatement	contained SectionIn nextgroup=nsisSectionInOpt skipwhite
+syn keyword nsisStatement	contained SectionInstType SectionIn nextgroup=nsisSectionInOpt skipwhite
 syn region nsisSectionInOpt	contained start="" end="$" transparent keepend contains=@nsisAnyOpt,nsisSectionInKwd
 syn keyword nsisSectionInKwd	contained RO
 
@@ -269,10 +271,22 @@ syn keyword nsisAttribute	contained ManifestDPIAware nextgroup=nsisManifestDPIAw
 syn region nsisManifestDPIAwareOpt	contained start="" end="$" transparent keepend contains=@nsisAnyOpt,nsisManifestDPIAwareKwd
 syn keyword nsisManifestDPIAwareKwd	contained notset true false
 
+syn keyword nsisAttribute	contained ManifestLongPathAware nextgroup=nsisManifestLongPathAwareOpt skipwhite
+syn region nsisManifestLongPathAwareOpt	contained start="" end="$" transparent keepend contains=@nsisAnyOpt,nsisManifestLongPathAwareKwd
+syn match nsisManifestLongPathAwareKwd	contained "\<\%(notset\|true\|false\)\>"
+
 syn keyword nsisAttribute	contained ManifestSupportedOS nextgroup=nsisManifestSupportedOSOpt skipwhite
 syn region nsisManifestSupportedOSOpt	contained start="" end="$" transparent keepend contains=@nsisAnyOpt,nsisManifestSupportedOSKwd
 syn match nsisManifestSupportedOSKwd	contained "\<\%(none\|all\|WinVista\|Win7\|Win8\|Win8\.1\|Win10\)\>"
 
+syn keyword nsisAttribute	contained PEAddResource nextgroup=nsisPEAddResourceOpt skipwhite
+syn region nsisPEAddResourceOpt	contained start="" end="$" transparent keepend contains=@nsisAnyOpt,nsisPEAddResourceKwd
+syn match nsisPEAddResourceKwd	contained "/\%(OVERWRITE\|REPLACE\)\>"
+
+syn keyword nsisAttribute	contained PERemoveResource nextgroup=nsisPERemoveResourceOpt skipwhite
+syn region nsisPERemoveResourceOpt	contained start="" end="$" transparent keepend contains=@nsisAnyOpt,nsisPERemoveResourceKwd
+syn match nsisPERemoveResourceKwd	contained "/NOERRORS\>"
+
 syn keyword nsisAttribute	contained RequestExecutionLevel nextgroup=nsisRequestExecutionLevelOpt skipwhite
 syn region nsisRequestExecutionLevelOpt  contained start="" end="$" transparent keepend contains=@nsisAnyOpt,nsisRequestExecutionLevelKwd
 syn keyword nsisRequestExecutionLevelKwd contained none user highest admin
@@ -353,7 +367,7 @@ syn keyword nsisInstruction	contained ExpandEnvStrings ReadEnvStr
 
 syn keyword nsisInstruction	contained DeleteRegKey nextgroup=nsisDeleteRegKeyOpt skipwhite
 syn region nsisDeleteRegKeyOpt	contained start="" end="$" transparent keepend contains=@nsisAnyOpt,nsisDeleteRegKeyKwd,nsisRegistry
-syn match nsisDeleteRegKeyKwd	contained "/ifempty\>"
+syn match nsisDeleteRegKeyKwd	contained "/\%(ifempty\|ifnosubkeys\|ifnovalues\)\>"
 
 syn keyword nsisInstruction	contained nextgroup=nsisRegistryOpt skipwhite
 			\ DeleteRegValue EnumRegKey EnumRegValue ReadRegDWORD ReadRegStr WriteRegBin WriteRegDWORD WriteRegExpandStr WriteRegStr
@@ -368,8 +382,8 @@ syn region nsisSetRegViewOpt	contained start="" end="$" transparent keepend cont
 syn keyword nsisSetRegViewKwd	contained default lastused
 
 "FUNCTIONS - general purpose (4.9.3)
-syn keyword nsisInstruction	contained CallInstDLL CreateDirectory GetDLLVersion
-syn keyword nsisInstruction	contained GetDLLVersionLocal GetFileTime GetFileTimeLocal
+syn keyword nsisInstruction	contained CallInstDLL CreateDirectory GetWinVer
+syn keyword nsisInstruction	contained GetFileTime GetFileTimeLocal GetKnownFolderPath
 syn keyword nsisInstruction	contained GetTempFileName SearchPath RegDLL UnRegDLL
 
 syn keyword nsisInstruction	contained CopyFiles nextgroup=nsisCopyFilesOpt skipwhite
@@ -380,6 +394,10 @@ syn keyword nsisInstruction	contained CreateShortcut nextgroup=nsisCreateShortcu
 syn region nsisCreateShortcutOpt contained start="" end="$" transparent keepend contains=@nsisAnyOpt,nsisCreateShortcutKwd
 syn match nsisCreateShortcutKwd	 contained "/NoWorkingDir\>"
 
+syn keyword nsisInstruction	contained GetDLLVersion GetDLLVersionLocal nextgroup=nsisGetDLLVersionOpt skipwhite
+syn region nsisGetDLLVersionOpt contained start="" end="$" transparent keepend contains=@nsisAnyOpt,nsisGetDLLVersionKwd
+syn match nsisGetDLLVersionKwd	 contained "/ProductVersion\>"
+
 syn keyword nsisInstruction	contained GetFullPathName nextgroup=nsisGetFullPathNameOpt skipwhite
 syn region nsisGetFullPathNameOpt contained start="" end="$" transparent keepend contains=@nsisAnyOpt,nsisGetFullPathNameKwd
 syn match nsisGetFullPathNameKwd  contained "/SHORT\>"
@@ -395,6 +413,7 @@ syn keyword nsisFileAttrib	contained FILE_ATTRIBUTE_TEMPORARY
 syn keyword nsisInstruction	contained Abort Call ClearErrors GetCurrentAddress
 syn keyword nsisInstruction	contained GetFunctionAddress GetLabelAddress Goto
 syn keyword nsisInstruction	contained IfAbort IfErrors IfFileExists IfRebootFlag IfSilent
+syn keyword nsisInstruction	contained IfShellVarContextAll IfRtlLanguage
 syn keyword nsisInstruction	contained IntCmp IntCmpU Int64Cmp Int64CmpU IntPtrCmp IntPtrCmpU
 syn keyword nsisInstruction	contained Return Quit SetErrors StrCmp StrCmpS
 
@@ -460,6 +479,10 @@ syn keyword nsisInstruction	contained CreateFont nextgroup=nsisFontOpt skipwhite
 syn keyword nsisInstruction	contained nextgroup=nsisBooleanOpt skipwhite
 			\ LockWindow SetAutoClose
 
+syn keyword nsisInstruction	contained LoadAndSetImage nextgroup=nsisLoadAndSetImageOpt skipwhite
+syn region nsisLoadAndSetImageOpt contained start="" end="$" transparent keepend contains=@nsisAnyOpt,nsisLoadAndSetImageKwd
+syn match nsisLoadAndSetImageKwd  contained "/\%(EXERESOURCE\|STRINGID\|RESIZETOFIT\%(WIDTH\|HEIGHT\)\)\>"
+
 syn keyword nsisInstruction	contained SendMessage nextgroup=nsisSendMessageOpt skipwhite
 syn region nsisSendMessageOpt	contained start="" end="$" transparent keepend contains=@nsisAnyOpt,nsisSendMessageKwd
 syn match nsisSendMessageKwd	contained "/TIMEOUT\>"
@@ -556,7 +579,7 @@ syn keyword nsisVerboseKwd	contained push pop
 "PREPROCESSOR (5.4)
 syn match nsisDefine		contained "!define\>" nextgroup=nsisDefineOpt skipwhite
 syn region nsisDefineOpt	contained start="" end="$" transparent keepend contains=@nsisAnyOpt,nsisDefineKwd
-syn match nsisDefineKwd		contained "/\%(ifndef\|redef\|date\|utcdate\|math\|file\)\>"
+syn match nsisDefineKwd		contained "/\%(ifndef\|redef\|date\|utcdate\|file\|intfmt\|math\)\>"
 
 syn match nsisDefine		contained "!undef\>"
 syn match nsisPreCondit		contained "!ifdef\>"
@@ -615,7 +638,10 @@ hi def link nsisInstTypeKwd		Constant
 hi def link nsisLicenseBkColorKwd	Constant
 hi def link nsisLicenseForceSelectionKwd Constant
 hi def link nsisManifestDPIAwareKwd	Constant
+hi def link nsisManifestLongPathAwareKwd Constant
 hi def link nsisManifestSupportedOSKwd	Constant
+hi def link nsisPEAddResourceKwd	Constant
+hi def link nsisPERemoveResourceKwd	Constant
 hi def link nsisRequestExecutionLevelKwd Constant
 hi def link nsisShowInstDetailsKwd	Constant
 hi def link nsisSilentInstallKwd	Constant
@@ -633,11 +659,13 @@ hi def link nsisWriteRegMultiStrKwd	Constant
 hi def link nsisSetRegViewKwd		Constant
 hi def link nsisCopyFilesKwd		Constant
 hi def link nsisCreateShortcutKwd	Constant
+hi def link nsisGetDLLVersionKwd	Constant
 hi def link nsisGetFullPathNameKwd	Constant
 hi def link nsisFileAttrib		Constant
 hi def link nsisMessageBox		Constant
 hi def link nsisFileWriteUTF16LEKwd	Constant
 hi def link nsisSetShellVarContextKwd	Constant
+hi def link nsisLoadAndSetImageKwd	Constant
 hi def link nsisSendMessageKwd		Constant
 hi def link nsisSetBrandingImageKwd	Constant
 hi def link nsisSetDetailsViewKwd	Constant

runtime/syntax/routeros.vim

@@ -0,0 +1,91 @@
+" Vim syntax file
+" Language:        MikroTik RouterOS Script
+" Maintainer:      zainin <z@wintr.dev>
+" Original Author: ndbjorne @ MikroTik forums
+" Last Change:     2021 Nov 14
+
+" quit when a syntax file was already loaded
+if exists("b:current_syntax")
+  finish
+endif
+
+syn case ignore
+
+syn iskeyword @,48-57,-
+
+" comments
+syn match   routerosComment      /^\s*\zs#.*/
+
+" options submenus: /interface ether1 etc
+syn match   routerosSubMenu      "\([a-z]\)\@<!/[a-zA-Z0-9-]*"
+
+" variables are matched by looking at strings ending with "=", e.g. var=
+syn match   routerosVariable     "[a-zA-Z0-9-/]*\(=\)\@="
+syn match   routerosVariable     "$[a-zA-Z0-9-]*"
+
+" colored for clarity
+syn match   routerosDelimiter    "[,=]"
+" match slash in CIDR notation (1.2.3.4/24, 2001:db8::/48, ::1/128)
+syn match   routerosDelimiter    "\(\x\|:\)\@<=\/\(\d\)\@="
+" dash in IP ranges
+syn match   routerosDelimiter    "\(\x\|:\)\@<=-\(\x\|:\)\@="
+
+" match service names after "set", like in original routeros syntax
+syn match   routerosService      "\(set\)\@<=\s\(api-ssl\|api\|dns\|ftp\|http\|https\|pim\|ntp\|smb\|ssh\|telnet\|winbox\|www\|www-ssl\)"
+
+" colors various interfaces
+syn match   routerosInterface    "bridge\d\+\|ether\d\+\|wlan\d\+\|pppoe-\(out\|in\)\d\+"
+
+syn keyword routerosBoolean      yes no true false
+
+syn keyword routerosConditional  if
+
+" operators
+syn match   routerosOperator     " \zs[-+*<>=!~^&.,]\ze "
+syn match   routerosOperator     "[<>!]="
+syn match   routerosOperator     "<<\|>>"
+syn match   routerosOperator     "[+-]\d\@="
+
+syn keyword routerosOperator     and or in
+
+" commands
+syn keyword routerosCommands     beep delay put len typeof pick log time set find environment
+syn keyword routerosCommands     terminal error parse resolve toarray tobool toid toip toip6
+syn keyword routerosCommands     tonum tostr totime add remove enable disable where get print
+syn keyword routerosCommands     export edit find append as-value brief detail count-only file
+syn keyword routerosCommands     follow follow-only from interval terse value-list without-paging
+syn keyword routerosCommands     return
+
+" variable types
+syn keyword routerosType         global local
+
+" loop keywords
+syn keyword routerosRepeat       do while for foreach
+
+syn match   routerosSpecial      "[():[\]{|}]"
+
+syn match   routerosLineContinuation "\\$"
+
+syn match   routerosEscape       "\\["\\nrt$?_abfv]" contained display
+syn match   routerosEscape       "\\\x\x"            contained display
+
+syn region  routerosString       start=+"+ skip=+\\\\\|\\"+ end=+"+ contains=routerosEscape,routerosLineContinuation
+
+hi link routerosComment              Comment
+hi link routerosSubMenu              Function
+hi link routerosVariable             Identifier
+hi link routerosDelimiter            Operator
+hi link routerosEscape               Special
+hi link routerosService              Type
+hi link routerosInterface            Type
+hi link routerosBoolean              Boolean
+hi link routerosConditional          Conditional
+hi link routerosOperator             Operator
+hi link routerosCommands             Operator
+hi link routerosType                 Type
+hi link routerosRepeat               Repeat
+hi link routerosSpecial              Delimiter
+hi link routerosString               String
+hi link routerosLineContinuation     Special
+
+let b:current_syntax = "routeros"

runtime/syntax/sh.vim

@@ -2,8 +2,8 @@
 " Language:		shell (sh) Korn shell (ksh) bash (sh)
 " Maintainer:		Charles E. Campbell <NcampObell@SdrPchip.AorgM-NOSPAM>
 " Previous Maintainer:	Lennart Schultz <Lennart.Schultz@ecmwf.int>
-" Last Change:		Feb 18, 2021
-" Version:		198
+" Last Change:		Oct 26, 2021
+" Version:		199
 " URL:		http://www.drchip.org/astronaut/vim/index.html#SYNTAX_SH
 " For options and settings, please use:      :help ft-sh-syntax
 " This file includes many ideas from Eric Brunet (eric.brunet@ens.fr) and heredoc fixes from Felipe Contreras
@@ -147,7 +147,7 @@ if exists("b:is_kornshell") || exists("b:is_bash")
 endif
 syn cluster shCommandSubList	contains=shAlias,shArithmetic,shCmdParenRegion,shCommandSub,shComment,shCtrlSeq,shDeref,shDerefSimple,shDoubleQuote,shEcho,shEscape,shExDoubleQuote,shExpr,shExSingleQuote,shHereDoc,shNumber,shOperator,shOption,shPosnParm,shHereString,shRedir,shSingleQuote,shSpecial,shStatement,shSubSh,shTest,shVariable
 syn cluster shCurlyList	contains=shNumber,shComma,shDeref,shDerefSimple,shDerefSpecial
-" COMBAK: removing shEscape fromshDblQuoteList fails ksh04:43
+" COMBAK: removing shEscape from shDblQuoteList fails ksh04:43
 syn cluster shDblQuoteList	contains=shArithmetic,shCommandSub,shCommandSubBQ,shDeref,shDerefSimple,shPosnParm,shCtrlSeq,shSpecial,shSpecialDQ
 syn cluster shDerefList	contains=shDeref,shDerefSimple,shDerefVar,shDerefSpecial,shDerefWordError,shDerefPSR,shDerefPPS
 syn cluster shDerefVarList	contains=shDerefOffset,shDerefOp,shDerefVarArray,shDerefOpError
@@ -401,7 +401,7 @@ endif
 syn match	shComment		"^\s*\zs#.*$"	contains=@shCommentGroup
 syn match	shComment		"\s\zs#.*$"	contains=@shCommentGroup
 syn match	shComment	contained	"#.*$"	contains=@shCommentGroup
-syn match	shQuickComment	contained	"#.*$"
+syn match	shQuickComment	contained	"#.*$"          contains=@shCommentGroup
 syn match	shBQComment	contained	"#.\{-}\ze`"	contains=@shCommentGroup
 
 " Here Documents: {{{1

runtime/syntax/tcl.vim

@@ -6,8 +6,8 @@
 "		(previously Matt Neumann <mattneu@purpleturtle.com>)
 "		(previously Allan Kelly <allan@fruitloaf.co.uk>)
 " Original:	Robin Becker <robin@jessikat.demon.co.uk>
-" Last Change:	2021 Oct 03
-" Version:	1.14
+" Last Change:	2021 Nov 16
+" Version:	1.14 plus improvements from PR #8948
 " URL:		(removed, no longer worked)
 
 " quit when a syntax file was already loaded
@@ -192,18 +192,18 @@ syn region tcltkCommand matchgroup=tcltkCommandColor start="\<lsort\>" matchgrou
 syn keyword tclTodo contained	TODO
 
 " Sequences which are backslash-escaped: http://www.tcl.tk/man/tcl8.5/TclCmd/Tcl.htm#M16
-" Octal, hexadecimal, unicode codepoints, and the classics.
+" Octal, hexadecimal, Unicode codepoints, and the classics.
 " Tcl takes as many valid characters in a row as it can, so \xAZ in a string is newline followed by 'Z'.
-syn match   tclSpecial contained '\\\([0-7]\{1,3}\|x\x\{1,2}\|u\x\{1,4}\|[abfnrtv]\)'
+syn match   tclSpecial contained '\\\(\o\{1,3}\|x\x\{1,2}\|u\x\{1,4}\|[abfnrtv]\)'
 syn match   tclSpecial contained '\\[\[\]\{\}\"\$]'
 
 " Command appearing inside another command or inside a string.
 syn region tclEmbeddedStatement	start='\[' end='\]' contained contains=tclCommand,tclNumber,tclLineContinue,tclString,tclVarRef,tclEmbeddedStatement
 " A string needs the skip argument as it may legitimately contain \".
 " Match at start of line
-syn region  tclString		  start=+^"+ end=+"+ contains=@tclSpecialC skip=+\\\\\|\\"+
+syn region  tclString		  start=+^"+ end=+"+ contains=@tclSpecialC,@Spell skip=+\\\\\|\\"+
 "Match all other legal strings.
-syn region  tclString		  start=+[^\\]"+ms=s+1  end=+"+ contains=@tclSpecialC,@tclVarRefC,tclEmbeddedStatement skip=+\\\\\|\\"+
+syn region  tclString		  start=+[^\\]"+ms=s+1  end=+"+ contains=@tclSpecialC,@tclVarRefC,tclEmbeddedStatement,@Spell skip=+\\\\\|\\"+
 
 " Line continuation is backslash immediately followed by newline.
 syn match tclLineContinue '\\$'
@@ -222,12 +222,12 @@ syn match  tclNumber		"\.\d\+\(e[-+]\=\d\+\)\=[fl]\=\>"
 "floating point number, without dot, with exponent
 syn match  tclNumber		"\<\d\+e[-+]\=\d\+[fl]\=\>"
 "hex number
-syn match  tclNumber		"0x[0-9a-f]\+\(u\=l\=\|lu\)\>"
-"syn match  tclIdentifier	"\<[a-z_][a-z0-9_]*\>"
+syn match  tclNumber		"0x\x\+\(u\=l\=\|lu\)\>"
+"syn match  tclIdentifier	"\<\h\w*\>"
 syn case match
 
-syn region  tclComment		start="^\s*\#" skip="\\$" end="$" contains=tclTodo
-syn region  tclComment		start=/;\s*\#/hs=s+1 skip="\\$" end="$" contains=tclTodo
+syn region  tclComment		start="^\s*\#" skip="\\$" end="$" contains=tclTodo,@Spell
+syn region  tclComment		start=/;\s*\#/hs=s+1 skip="\\$" end="$" contains=tclTodo,@Spell
 
 "syn match tclComment /^\s*\#.*$/
 "syn match tclComment /;\s*\#.*$/hs=s+1

runtime/syntax/tcsh.vim

@@ -1,8 +1,9 @@
-" tcsh.vim: Vim syntax file for tcsh scripts
-" Maintainer: Doug Kearns <dougkearns@NoSpam.com> where NoSpam=gmail
-" Author: Gautam Iyer <gi1242+vim@NoSpam.com> where NoSpam=gmail
-" Modified: Sun 26 Sep 2021 12:40:55 PM EDT
-"
+" Vim syntax file
+" Language:		tcsh scripts
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Gautam Iyer <gi1242+vim@NoSpam.com> where NoSpam=gmail (Original Author)
+" Last Change:		2021 Oct 15
+
 " Description: We break up each statement into a "command" and an "end" part.
 " All groups are either a "command" or part of the "end" of a statement (ie
 " everything after the "command"). This is because blindly highlighting tcsh
@@ -20,36 +21,36 @@ endif
 let s:oldcpo = &cpo
 set cpo&vim " Line continuation is used
 
-setlocal iskeyword+=-
+syn iskeyword @,48-57,_,192-255,-
 
 syn case match
 
-" ----- Clusters -----
+" ----- Clusters ----- {{{1
 syn cluster tcshModifiers	contains=tcshModifier,tcshModifierError
 syn cluster tcshQuoteList	contains=tcshDQuote,tcshSQuote,tcshBQuote
-syn cluster tcshStatementEnds	contains=@tcshQuoteList,tcshComment,@tcshVarList,tcshRedir,tcshMeta,tcshHereDoc,tcshSpecial,tcshArguement
+syn cluster tcshStatementEnds	contains=@tcshQuoteList,tcshComment,@tcshVarList,tcshRedir,tcshMeta,tcshHereDoc,tcshSpecial,tcshArgument
 syn cluster tcshStatements	contains=tcshBuiltin,tcshCommands,tcshIf,tcshWhile
 syn cluster tcshVarList		contains=tcshUsrVar,tcshArgv,tcshSubst
 syn cluster tcshConditions	contains=tcshCmdSubst,tcshParenExpr,tcshOperator,tcshNumber,@tcshVarList
 
-" ----- Errors -----
+" ----- Errors ----- {{{1
 " Define first, so can be easily overridden.
 syn match tcshError contained '\v\S.+'
 
-" ----- Statements -----
+" ----- Statements ----- {{{1
 " Tcsh commands: Any filename / modifiable variable (must be first!)
 syn match tcshCommands	'\v[a-zA-Z0-9\\./_$:-]+' contains=tcshSpecial,tcshUsrVar,tcshArgv,tcshVarError nextgroup=tcshStatementEnd
 
 " Builtin commands except those treated specially. Currently (un)set(env),
 " (un)alias, if, while, else, bindkey
-syn keyword tcshBuiltin nextgroup=tcshStatementEnd alloc bg break breaksw builtins bye case cd chdir complete continue default dirs echo echotc end endif endsw eval exec exit fg filetest foreach getspath getxvers glob goto hashstat history hup inlib jobs kill limit log login logout ls ls-F migrate newgrp nice nohup notify onintr popd printenv pushd rehash repeat rootnode sched setpath setspath settc setty setxvers shift source stop suspend switch telltc time umask uncomplete unhash universe unlimit ver wait warp watchlog where which
+syn keyword tcshBuiltin nextgroup=tcshStatementEnd alloc bg break breaksw builtins bye case cd chdir complete continue default dirs echo echotc end endif endsw eval exec exit fg filetest foreach getspath getxvers glob goto hashstat history hup inlib jobs kill limit log login logout ls ls-F migrate newgrp nice nohup notify onintr popd printenv pushd rehash repeat rootnode sched setpath setspath settc setty setxvers shift source stop suspend switch telltc termname time umask uncomplete unhash universe unlimit ver wait warp watchlog where which
 
 " StatementEnd is anything after a built-in / command till the lexical end of a
 " statement (;, |, ||, |&, && or end of line)
 syn region tcshStatementEnd	transparent contained matchgroup=tcshBuiltin start='' end='\v\\@<!(;|\|[|&]?|\&\&|$)' contains=@tcshStatementEnds
 
 " set expressions (Contains shell variables)
-syn keyword tcshShellVar contained afsuser ampm argv autocorrect autoexpand autolist autologout backslash_quote catalog cdpath color colorcat command complete continue continue_args correct cwd dextract dirsfile dirstack dspmbyte dunique echo echo_style edit ellipsis fignore filec gid group histchars histdup histfile histlit history home ignoreeof implicitcd inputmode killdup killring listflags listjobs listlinks listmax listmaxrows loginsh logout mail matchbeep nobeep noclobber noding noglob nokanji nonomatch nostat notify oid owd path printexitvalue prompt prompt2 prompt3 promptchars pushdtohome pushdsilent recexact recognize_only_executables rmstar rprompt savedirs savehist sched shell shlvl status symlinks tcsh term time tperiod tty uid user verbose version visiblebell watch who wordchars
+syn keyword tcshShellVar contained addsuffix afsuser ampm anyerror argv autocorrect autoexpand autolist autologout autorehash backslash_quote catalog cdpath cdtohome color colorcat command compat_expr complete continue continue_args correct csubstnonl cwd dextract dirsfile dirstack dspmbyte dunique echo echo_style edit editors ellipsis euid euser fignore filec gid globdot globstar group highlight histchars histdup histfile histlit history home ignoreeof implicitcd inputmode killdup killring listflags listjobs listlinks listmax listmaxrows loginsh logout mail matchbeep nobeep noclobber noding noglob nokanji nonomatch nostat notify oid owd padhour parseoctal path printexitvalue prompt prompt2 prompt3 promptchars pushdtohome pushdsilent recexact recognize_only_executables rmstar rprompt savedirs savehist sched shell shlvl status symlinks tcsh term time tperiod tty uid user verbose version vimode visiblebell watch who wordchars
 syn keyword tcshBuiltin	nextgroup=tcshSetEnd set unset
 syn region  tcshSetEnd	contained transparent matchgroup=tcshBuiltin start='' skip='\\$' end='$\|;' contains=tcshShellVar,@tcshStatementEnds
 
@@ -96,14 +97,15 @@ syn keyword tcshBindkeyFuncs contained backward-char backward-delete-char
 	    \ history-search-forward insert-last-word i-search-fwd
 	    \ i-search-back keyboard-quit kill-line kill-region
 	    \ kill-whole-line list-choices list-choices-raw list-glob
-	    \ list-or-eof load-average magic-space newline normalize-path
-	    \ normalize-command overwrite-mode prefix-meta quoted-insert
-	    \ redisplay run-fg-editor run-help self-insert-command
-	    \ sequence-lead-in set-mark-command spell-word spell-line
-	    \ stuff-char toggle-literal-history transpose-chars
-	    \ transpose-gosling tty-dsusp tty-flush-output tty-sigintr
-	    \ tty-sigquit tty-sigtsusp tty-start-output tty-stop-output
-	    \ undefined-key universal-argument up-history upcase-word
+	    \ list-or-eof load-average magic-space newline newline-and-hold
+	    \ newline-and-down-history normalize-path normalize-command
+	    \ overwrite-mode prefix-meta quoted-insert redisplay
+	    \ run-fg-editor run-help self-insert-command sequence-lead-in
+	    \ set-mark-command spell-word spell-line stuff-char
+	    \ toggle-literal-history transpose-chars transpose-gosling
+	    \ tty-dsusp tty-flush-output tty-sigintr tty-sigquit tty-sigtsusp
+	    \ tty-start-output tty-stop-output undefined-key
+	    \ universal-argument up-history upcase-word
 	    \ vi-beginning-of-next-word vi-add vi-add-at-eol vi-chg-case
 	    \ vi-chg-meta vi-chg-to-eol vi-cmd-mode vi-cmd-mode-complete
 	    \ vi-delprev vi-delmeta vi-endword vi-eword vi-char-back
@@ -116,7 +118,7 @@ syn keyword tcshBindkeyFuncs contained backward-char backward-delete-char
 	    \ e_paste_from_clipboard e_dosify_next e_dosify_prev e_page_up
 	    \ e_page_down
 syn keyword tcshBuiltin nextgroup=tcshBindkeyEnd bindkey
-syn region tcshBindkeyEnd contained transparent matchgroup=tcshBuiltin start='' skip='\\$' end='$' contains=@tcshQuoteList,tcshComment,@tcshVarList,tcshMeta,tcshSpecial,tcshArguement,tcshBindkeyFuncs
+syn region tcshBindkeyEnd contained transparent matchgroup=tcshBuiltin start='' skip='\\$' end='$' contains=@tcshQuoteList,tcshComment,@tcshVarList,tcshMeta,tcshSpecial,tcshArgument,tcshBindkeyFuncs
 
 " Expressions start with @.
 syn match tcshExprStart '\v\@\s+' nextgroup=tcshExprVar
@@ -126,20 +128,20 @@ syn match tcshExprOp	contained '\v\s*\=' nextgroup=tcshExprEnd
 syn match tcshExprEnd	contained '\v.*$'hs=e+1 contains=@tcshConditions
 syn match tcshExprEnd	contained '\v.{-};'hs=e	contains=@tcshConditions
 
-" ----- Comments: -----
+" ----- Comments: ----- {{{1
 syn match tcshComment	'#\s.*' contains=tcshTodo,tcshCommentTi,@Spell
 syn match tcshComment	'\v#($|\S.*)' contains=tcshTodo,tcshCommentTi
 syn match tcshSharpBang '^#! .*$'
 syn match tcshCommentTi contained '\v#\s*\u\w*(\s+\u\w*)*:'hs=s+1 contains=tcshTodo
 syn match tcshTodo	contained '\v\c<todo>'
 
-" ----- Strings -----
+" ----- Strings ----- {{{1
 " Tcsh does not allow \" in strings unless the "backslash_quote" shell
 " variable is set. Set the vim variable "tcsh_backslash_quote" to 0 if you
 " want VIM to assume that no backslash quote constructs exist.
 
 " Backquotes are treated as commands, and are not contained in anything
-if(exists('tcsh_backslash_quote') && tcsh_backslash_quote == 0)
+if exists('tcsh_backslash_quote') && tcsh_backslash_quote == 0
     syn region tcshSQuote	keepend contained start="\v\\@<!'" end="'"
     syn region tcshDQuote	keepend contained start='\v\\@<!"' end='"' contains=@tcshVarList,tcshSpecial,@Spell
     syn region tcshBQuote	keepend start='\v\\@<!`' end='`' contains=@tcshStatements
@@ -149,7 +151,7 @@ else
     syn region tcshBQuote	keepend matchgroup=tcshBQuoteGrp start='\v\\@<!`' skip='\v\\\\|\\`' end='`' contains=@tcshStatements
 endif
 
-" ----- Variables -----
+" ----- Variables ----- {{{1
 " Variable Errors. Must come first! \$ constructs will be flagged by
 " tcshSpecial, so we don't consider them here.
 syn match tcshVarError	'\v\$\S*'	contained
@@ -171,7 +173,7 @@ syn match tcshSubst contained	'\v\$\{[%#?]%(\h\w*|\d+)%(:\S*)?\}' contains=tcshM
 syn match tcshModifierError	contained '\v:\S*'
 syn match tcshModifier		contained '\v:[ag]?[htreuls&qx]' nextgroup=@tcshModifiers
 
-" ----- Operators / Specials -----
+" ----- Operators / Specials ----- {{{1
 " Standard redirects (except <<) [<, >, >>, >>&, >>!, >>&!]
 syn match tcshRedir contained	'\v\<|\>\>?\&?!?'
 
@@ -190,13 +192,13 @@ syn match tcshOperator	contained '&&\|!\~\|!=\|<<\|<=\|==\|=\~\|>=\|>>\|\*\|\^\|
 syn match tcshNumber	contained '\v<-?\d+>'
 
 " Arguments
-syn match tcshArguement	contained '\v\s@<=-(\w|-)*'
+syn match tcshArgument	contained '\v\s@<=-(\w|-)*'
 
 " Special characters. \xxx, or backslashed characters.
 "syn match tcshSpecial	contained '\v\\@<!\\(\d{3}|.)'
 syn match tcshSpecial	contained '\v\\%([0-7]{3}|.)'
 
-" ----- Synchronising -----
+" ----- Synchronising ----- {{{1
 if exists('tcsh_minlines')
     if tcsh_minlines == 'fromstart'
 	syn sync fromstart
@@ -207,6 +209,7 @@ else
     syn sync minlines=100	" Some completions can be quite long
 endif
 
+" ----- Highlighting ----- {{{1
 " Define highlighting of syntax groups
 hi def link tcshError		Error
 hi def link tcshBuiltin		Statement
@@ -233,17 +236,20 @@ hi def link tcshVarError	Error
 hi def link tcshUsrVar		Type
 hi def link tcshArgv		tcshUsrVar
 hi def link tcshSubst		tcshUsrVar
-hi def link tcshModifier	tcshArguement
+hi def link tcshModifier	tcshArgument
 hi def link tcshModifierError	tcshVarError
 hi def link tcshMeta		tcshSubst
 hi def link tcshRedir		tcshOperator
 hi def link tcshHereDoc		tcshSQuote
 hi def link tcshOperator	Operator
 hi def link tcshNumber		Number
-hi def link tcshArguement	Special
+hi def link tcshArgument	Special
 hi def link tcshSpecial		SpecialChar
+" }}}
 
 let &cpo = s:oldcpo
 unlet s:oldcpo
 
 let b:current_syntax = 'tcsh'
+
+" vim: nowrap sw=2 sts=2 ts=8 noet fdm=marker:

runtime/syntax/tmux.vim

@@ -1,5 +1,5 @@
 " Language: tmux(1) configuration file
-" Version: 3.0 (git-48cbbb87)
+" Version: 3.2a (git-44ada9cd)
 " URL: https://github.com/ericpruitt/tmux.vim/
 " Maintainer: Eric Pruitt <eric.pruitt@gmail.com>
 " License: 2-Clause BSD (http://opensource.org/licenses/BSD-2-Clause)
@@ -30,14 +30,14 @@ syn match tmuxVariable          /\w\+=/                display
 syn match tmuxVariableExpansion /\${\=\w\+}\=/         display
 syn match tmuxControl           /%\(if\|elif\|else\|endif\)/
 
-syn region tmuxComment start=/#/ skip=/\\\@<!\\$/ end=/$/ contains=tmuxTodo
+syn region tmuxComment start=/#/ skip=/\\\@<!\\$/ end=/$/ contains=tmuxTodo,@Spell
 
-syn region tmuxString start=+"+ skip=+\\\\\|\\"\|\\$+ excludenl end=+"+ end='$' contains=tmuxFormatString
-syn region tmuxString start=+'+ skip=+\\\\\|\\'\|\\$+ excludenl end=+'+ end='$' contains=tmuxFormatString
+syn region tmuxString start=+"+ skip=+\\\\\|\\"\|\\$+ excludenl end=+"+ end='$' contains=tmuxFormatString,@Spell
+syn region tmuxString start=+'+ skip=+\\\\\|\\'\|\\$+ excludenl end=+'+ end='$' contains=tmuxFormatString,@Spell
 
 " TODO: Figure out how escaping works inside of #(...) and #{...} blocks.
 syn region tmuxFormatString start=/#[#DFhHIPSTW]/ end=// contained keepend
-syn region tmuxFormatString start=/#{/ skip=/#{.\{-}}/ end=/}/ contained keepend
+syn region tmuxFormatString start=/#{/ skip=/#{.\{-}}/ end=/}/ keepend
 syn region tmuxFormatString start=/#(/ skip=/#(.\{-})/ end=/)/ contained keepend
 
 hi def link tmuxFormatString      Identifier
@@ -55,62 +55,69 @@ hi def link tmuxTodo              Todo
 hi def link tmuxVariable          Identifier
 hi def link tmuxVariableExpansion Identifier
 
-" Make the foreground of colourXXX keywords match the color they represent.
+" Make the foreground of colourXXX keywords match the color they represent
+" when g:tmux_syntax_colors is unset or set to a non-zero value.
 " Darker colors have their background set to white.
-for s:i in range(0, 255)
-    let s:bg = (!s:i || s:i == 16 || (s:i > 231 && s:i < 235)) ? 15 : "none"
-    exec "syn match tmuxColour" . s:i . " /\\<colour" . s:i . "\\>/ display"
-\     " | highlight tmuxColour" . s:i . " ctermfg=" . s:i . " ctermbg=" . s:bg
-endfor
+if get(g:, "tmux_syntax_colors", 1)
+    for s:i in range(0, 255)
+        let s:bg = (!s:i || s:i == 16 || (s:i > 231 && s:i < 235)) ? 15 : "none"
+        exec "syn match tmuxColour" . s:i . " /\\<colour" . s:i . "\\>/ display"
+\         " | highlight tmuxColour" . s:i . " ctermfg=" . s:i . " ctermbg=" . s:bg
+    endfor
+endif
 
 syn keyword tmuxOptions
-\ backspace buffer-limit command-alias default-terminal escape-time
-\ exit-empty activity-action assume-paste-time base-index bell-action
-\ default-command default-shell default-size destroy-unattached
+\ backspace buffer-limit command-alias copy-command default-terminal editor
+\ escape-time exit-empty activity-action assume-paste-time base-index
+\ bell-action default-command default-shell default-size destroy-unattached
 \ detach-on-destroy display-panes-active-colour display-panes-colour
-\ display-panes-time display-time exit-unattached focus-events history-file
-\ history-limit key-table lock-after-time lock-command message-command-style
-\ message-limit message-style aggressive-resize allow-rename
-\ alternate-screen automatic-rename automatic-rename-format
-\ clock-mode-colour clock-mode-style main-pane-height main-pane-width
-\ mode-keys mode-style monitor-activity monitor-bell monitor-silence mouse
-\ other-pane-height other-pane-width pane-active-border-style
-\ pane-base-index pane-border-format pane-border-status pane-border-style
-\ prefix prefix2 remain-on-exit renumber-windows repeat-time set-clipboard
-\ set-titles set-titles-string silence-action status status-bg status-fg
-\ status-format status-interval status-justify status-keys status-left
-\ status-left-length status-left-style status-position status-right
-\ status-right-length status-right-style status-style synchronize-panes
-\ terminal-overrides update-environment user-keys visual-activity
-\ visual-bell visual-silence window-active-style window-size
-\ window-status-activity-style window-status-bell-style
+\ display-panes-time display-time exit-unattached extended-keys focus-events
+\ history-file history-limit key-table lock-after-time lock-command
+\ message-command-style message-limit message-style aggressive-resize
+\ allow-rename alternate-screen automatic-rename automatic-rename-format
+\ clock-mode-colour clock-mode-style copy-mode-current-match-style
+\ copy-mode-mark-style copy-mode-match-style main-pane-height
+\ main-pane-width mode-keys mode-style monitor-activity monitor-bell
+\ monitor-silence mouse other-pane-height other-pane-width
+\ pane-active-border-style pane-base-index pane-border-format
+\ pane-border-lines pane-border-status pane-border-style pane-colours prefix
+\ prefix2 prompt-history-limit remain-on-exit renumber-windows repeat-time
+\ set-clipboard set-titles set-titles-string silence-action status status-bg
+\ status-fg status-format status-interval status-justify status-keys
+\ status-left status-left-length status-left-style status-position
+\ status-right status-right-length status-right-style status-style
+\ synchronize-panes terminal-features terminal-overrides update-environment
+\ user-keys visual-activity visual-bell visual-silence window-active-style
+\ window-size window-status-activity-style window-status-bell-style
 \ window-status-current-format window-status-current-style
 \ window-status-format window-status-last-style window-status-separator
-\ window-status-style window-style word-separators wrap-search xterm-keys
+\ window-status-style window-style word-separators wrap-search
 
 syn keyword tmuxCommands
 \ attach attach-session bind bind-key break-pane breakp capture-pane
 \ capturep choose-buffer choose-client choose-tree clear-history clearhist
-\ clock-mode command-prompt confirm confirm-before copy-mode detach
-\ detach-client display display-menu display-message display-panes displayp
-\ find-window findw if if-shell join-pane joinp kill-pane kill-server
-\ kill-session kill-window killp has-session has killw link-window linkw
-\ list-buffers list-clients list-commands list-keys list-panes list-sessions
-\ list-windows load-buffer loadb lock lock-client lock-server lock-session
-\ lockc last-pane lastp locks ls last-window last lsb lsc delete-buffer
-\ deleteb lscm lsk lsp lsw menu move-pane move-window movep movew new
-\ new-session new-window neww next next-layout next-window nextl
-\ paste-buffer pasteb pipe-pane pipep prev previous-layout previous-window
-\ prevl refresh refresh-client rename rename-session rename-window renamew
-\ resize-pane resize-window resizep resizew respawn-pane respawn-window
-\ respawnp respawnw rotate-window rotatew run run-shell save-buffer saveb
+\ clock-mode command-prompt confirm confirm-before copy-mode customize-mode
+\ detach detach-client display display-menu display-message display-panes
+\ display-popup displayp find-window findw if if-shell join-pane joinp
+\ kill-pane kill-server kill-session kill-window killp has has-session killw
+\ link-window linkw list-buffers list-clients list-commands list-keys
+\ list-panes list-sessions list-windows load-buffer loadb lock lock-client
+\ lock-server lock-session lockc last-pane lastp locks ls last last-window
+\ lsb delete-buffer deleteb lsc lscm lsk lsp lsw menu move-pane move-window
+\ clear-prompt-history clearphist movep movew new new-session new-window
+\ neww next next-layout next-window nextl paste-buffer pasteb pipe-pane
+\ pipep popup prev previous-layout previous-window prevl refresh
+\ refresh-client rename rename-session rename-window renamew resize-pane
+\ resize-window resizep resizew respawn-pane respawn-window respawnp
+\ respawnw rotate-window rotatew run run-shell save-buffer saveb
 \ select-layout select-pane select-window selectl selectp selectw send
 \ send-keys send-prefix set set-buffer set-environment set-hook set-option
 \ set-window-option setb setenv setw show show-buffer show-environment
-\ show-hooks show-messages show-options show-window-options showb showenv
-\ showmsgs showw source source-file split-window splitw start start-server
-\ suspend-client suspendc swap-pane swap-window swapp swapw switch-client
-\ switchc unbind unbind-key unlink-window unlinkw wait wait-for
+\ show-hooks show-messages show-options show-prompt-history
+\ show-window-options showb showenv showmsgs showphist showw source
+\ source-file split-window splitw start start-server suspend-client suspendc
+\ swap-pane swap-window swapp swapw switch-client switchc unbind unbind-key
+\ unlink-window unlinkw wait wait-for
 
 let &cpo = s:original_cpo
 unlet! s:original_cpo s:bg s:i

runtime/syntax/toml.vim

@@ -0,0 +1,81 @@
+" Vim syntax file
+" Language:            TOML
+" Homepage:            https://github.com/cespare/vim-toml
+" Maintainer:          Aman Verma
+" Previous Maintainer: Caleb Spare <cespare@gmail.com>
+" Last Change:         Oct 8, 2021
+
+if exists('b:current_syntax')
+  finish
+endif
+
+syn match tomlEscape /\\[btnfr"/\\]/ display contained
+syn match tomlEscape /\\u\x\{4}/ contained
+syn match tomlEscape /\\U\x\{8}/ contained
+syn match tomlLineEscape /\\$/ contained
+
+" Basic strings
+syn region tomlString oneline start=/"/ skip=/\\\\\|\\"/ end=/"/ contains=tomlEscape
+" Multi-line basic strings
+syn region tomlString start=/"""/ end=/"""/ contains=tomlEscape,tomlLineEscape
+" Literal strings
+syn region tomlString oneline start=/'/ end=/'/
+" Multi-line literal strings
+syn region tomlString start=/'''/ end=/'''/
+
+syn match tomlInteger /[+-]\=\<[1-9]\(_\=\d\)*\>/ display
+syn match tomlInteger /[+-]\=\<0\>/ display
+syn match tomlInteger /[+-]\=\<0x[[:xdigit:]]\(_\=[[:xdigit:]]\)*\>/ display
+syn match tomlInteger /[+-]\=\<0o[0-7]\(_\=[0-7]\)*\>/ display
+syn match tomlInteger /[+-]\=\<0b[01]\(_\=[01]\)*\>/ display
+syn match tomlInteger /[+-]\=\<\(inf\|nan\)\>/ display
+
+syn match tomlFloat /[+-]\=\<\d\(_\=\d\)*\.\d\+\>/ display
+syn match tomlFloat /[+-]\=\<\d\(_\=\d\)*\(\.\d\(_\=\d\)*\)\=[eE][+-]\=\d\(_\=\d\)*\>/ display
+
+syn match tomlBoolean /\<\%(true\|false\)\>/ display
+
+" https://tools.ietf.org/html/rfc3339
+syn match tomlDate /\d\{4\}-\d\{2\}-\d\{2\}/ display
+syn match tomlDate /\d\{2\}:\d\{2\}:\d\{2\}\%(\.\d\+\)\?/ display
+syn match tomlDate /\d\{4\}-\d\{2\}-\d\{2\}[T ]\d\{2\}:\d\{2\}:\d\{2\}\%(\.\d\+\)\?\%(Z\|[+-]\d\{2\}:\d\{2\}\)\?/ display
+
+syn match tomlDotInKey /\v[^.]+\zs\./ contained display
+syn match tomlKey /\v(^|[{,])\s*\zs[[:alnum:]._-]+\ze\s*\=/ contains=tomlDotInKey display
+syn region tomlKeyDq oneline start=/\v(^|[{,])\s*\zs"/ end=/"\ze\s*=/ contains=tomlEscape
+syn region tomlKeySq oneline start=/\v(^|[{,])\s*\zs'/ end=/'\ze\s*=/
+
+syn region tomlTable oneline start=/^\s*\[[^\[]/ end=/\]/ contains=tomlKey,tomlKeyDq,tomlKeySq,tomlDotInKey
+
+syn region tomlTableArray oneline start=/^\s*\[\[/ end=/\]\]/ contains=tomlKey,tomlKeyDq,tomlKeySq,tomlDotInKey
+
+syn region tomlKeyValueArray start=/=\s*\[\zs/ end=/\]/ contains=@tomlValue
+
+syn region tomlArray start=/\[/ end=/\]/ contains=@tomlValue contained
+
+syn cluster tomlValue contains=tomlArray,tomlString,tomlInteger,tomlFloat,tomlBoolean,tomlDate,tomlComment
+
+syn keyword tomlTodo TODO FIXME XXX BUG contained
+
+syn match tomlComment /#.*/ contains=@Spell,tomlTodo
+
+hi def link tomlComment Comment
+hi def link tomlTodo Todo
+hi def link tomlTableArray Title
+hi def link tomlTable Title
+hi def link tomlDotInKey Normal
+hi def link tomlKeySq Identifier
+hi def link tomlKeyDq Identifier
+hi def link tomlKey Identifier
+hi def link tomlDate Constant
+hi def link tomlBoolean Boolean
+hi def link tomlFloat Float
+hi def link tomlInteger Number
+hi def link tomlString String
+hi def link tomlLineEscape SpecialChar
+hi def link tomlEscape SpecialChar
+
+syn sync minlines=500
+let b:current_syntax = 'toml'
+
+" vim: et sw=2 sts=2

runtime/syntax/vim.vim

@@ -1,8 +1,8 @@
 " Vim syntax file
 " Language:	Vim 8.2 script
 " Maintainer:	Charles E. Campbell <NcampObell@SdrPchip.AorgM-NOSPAM>
-" Last Change:	September 21, 2021
-" Version:	8.2-07
+" Last Change:	November 19, 2021
+" Version:	8.2-15
 " URL:	http://www.drchip.org/astronaut/vim/index.html#SYNTAX_VIM
 " Automatically generated keyword lists: {{{1
 
@@ -10,7 +10,7 @@
 if exists("b:current_syntax")
   finish
 endif
-let s:keepcpo = &cpo
+let s:keepcpo= &cpo
 set cpo&vim
 
 " vimTodo: contains common special-notices for comments {{{2
@@ -19,24 +19,24 @@ syn keyword vimTodo contained	COMBAK	FIXME	TODO	XXX
 syn cluster vimCommentGroup	contains=vimTodo,@Spell
 
 " regular vim commands {{{2
-syn keyword vimCommand contained	a ar[gs] argl[ocal] ba[ll] bl[ast] brea[k] buffers ca caf[ter] cbo[ttom] cex[pr] cgete[xpr] cl[ist] cn[ext] colo[rscheme] cons[t] cs d[elete] delel delf[unction] dif[fupdate] difft[his] dli[st] ds[earch] echoc[onsole] em[enu] endw[hile] export filt[er] fo[ld] fu[nction] gvim helpt[ags] iabc[lear] import isp[lit] keepa l[ist] laf[ter] lbel[ow] lcscope lf[ile] lgr[ep] lli[st] lnf[ile] lol[der] lt[ag] lw[indow] menut[ranslate] mkvie[w] nbc[lose] noh[lsearch] ol[dfiles] pa[ckadd] po[p] prof[ile] pta[g] ptr[ewind] py3f[ile] pythonx quita[ll] redraws[tatus] rew[ind] rubyf[ile] sIg sa[rgument] sba[ll] sbr[ewind] scl scscope sfir[st] sgl sic sin sm[ap] snoreme spelld[ump] spellw[rong] srg sta[g] sts[elect] sus[pend] syncbind tabN[ext] tabl[ast] tabr[ewind] tcld[o] tj[ump] tlu tno[remap] tu[nmenu] undol[ist] v vie[w] viu[sage] wa[ll] winp[os] wundo xme xr[estore]
-syn keyword vimCommand contained	ab arga[dd] argu[ment] bad[d] bm[odified] breaka[dd] bun[load] cabc[lear] cal[l] cc cf[ile] changes cla[st] cnew[er] com cope[n] cscope debug delep dell diffg[et] dig[raphs] do dsp[lit] echoe[rr] en[dif] ene[w] exu[sage] fin[d] foldc[lose] g h[elp] hi if in iuna[bbrev] keepalt la[st] lan[guage] lbo[ttom] ld[o] lfdo lgrepa[dd] lma lo[adview] lop[en] lua m[ove] mes[sages] mod[e] nbs[tart] nor omapc[lear] packl[oadall] popu[p] profd[el] ptf[irst] pts[elect] py3f[ile] pyx r[ead] redrawt[abline] ri[ght] rundo sIl sal[l] sbf[irst] sc scp se[t] sg sgn sie sip sme snoremenu spelli[nfo] spr[evious] sri star[tinsert] substitutepattern sv[iew] syntime tabc[lose] tabm[ove] tabs tclf[ile] tl[ast] tlunmenu to[pleft] tunma[p] unh[ide] var vim9[cmd] vne[w] wh[ile] wn[ext] wv[iminfo] xmenu xunme
-syn keyword vimCommand contained	abc[lear] argd[elete] as[cii] balt bn[ext] breakd[el] bw[ipeout] cabo[ve] cat[ch] ccl[ose] cfdo chd[ir] class cnf[ile] comc[lear] cp[revious] cstag debugg[reedy] deletel delm[arks] diffo[ff] dir doau e[dit] echom[sg] enddef eval f[ile] fina[lly] foldd[oopen] go[to] ha[rdcopy] hid[e] ij[ump] inor j[oin] keepj[umps] lab[ove] lat lc[d] le[ft] lfir[st] lh[elpgrep] lmak[e] loadk lp[revious] luado ma[rk] mk[exrc] mz[scheme] new nore on[ly] pc[lose] pp[op] promptf[ind] ptj[ump] pu[t] py[thon] pyxdo rec[over] reg[isters] rightb[elow] rv[iminfo] sIn san[dbox] sbl[ast] scI scr[iptnames] setf[iletype] sgI sgp sig sir smenu so[urce] spellr[are] sr srl startg[replace] substituterepeat sw[apname] t tabd[o] tabn[ext] tags te[aroff] tlm tm[enu] tp[revious] type unl ve[rsion] vim9s[cript] vs[plit] win[size] wp[revious] x[it] xnoreme xunmenu
-syn keyword vimCommand contained	abo[veleft] argdo au bd[elete] bo[tright] breakl[ist] cN[ext] cad[dbuffer] cb[uffer] cd cfir[st] che[ckpath] cle[arjumps] cnor comp[iler] cpf[ile] cun def deletep delp diffp[atch] disa[ssemble] doaut ea echon endf[unction] ex files fini[sh] folddoc[losed] gr[ep] helpc[lose] his[tory] il[ist] interface ju[mps] keepp[atterns] lad[dexpr] later lch[dir] lefta[bove] lg[etfile] lhi[story] lmapc[lear] loadkeymap lpf[ile] luafile mak[e] mks[ession] mzf[ile] nmapc[lear] nos[wapfile] opt[ions] pe[rl] pre[serve] promptr[epl] ptl[ast] pw[d] pydo pyxfile red[o] res[ize] ru[ntime] sI sIp sav[eas] sbm[odified] sce scripte[ncoding] setg[lobal] sgc sgr sign sl[eep] smile sor[t] spellr[epall] srI srn startr[eplace] sun[hide] sy tN[ext] tabe[dit] tabnew tc[d] ter[minal] tlmenu tma[p] tr[ewind] u[ndo] unlo[ckvar] verb[ose] vim[grep] wN[ext] winc[md] wq xa[ll] xnoremenu xwininfo
-syn keyword vimCommand contained	addd arge[dit] bN[ext] bel[owright] bp[revious] bro[wse] cNf[ile] cadde[xpr] cbe[fore] cdo cg[etfile] checkt[ime] clo[se] co[py] con[tinue] cq[uit] cuna[bbrev] defc[ompile] deletl dep diffpu[t] dj[ump] dp earlier el[se] endfo[r] exi[t] filet fir[st] foldo[pen] grepa[dd] helpf[ind] i imapc[lear] intro k lN[ext] laddb[uffer] lb[uffer] lcl[ose] leg[acy] lgetb[uffer] ll lne[xt] loc[kmarks] lr[ewind] lv[imgrep] marks mksp[ell] n[ext] noa nu[mber] ownsyntax ped[it] prev[ious] ps[earch] ptn[ext] py3 pyf[ile] q[uit] redi[r] ret[ab] rub[y] sIc sIr sbN[ext] sbn[ext] scg scriptv[ersion] setl[ocal] sge sh[ell] sil[ent] sla[st] sn[ext] sp[lit] spellr[rare] src srp stj[ump] sunme syn ta[g] tabf[ind] tabo[nly] tch[dir] tf[irst] tln tmapc[lear] try una[bbreviate] uns[ilent] vert[ical] vimgrepa[dd] w[rite] windo wqa[ll] xmapc[lear] xprop y[ank]
-syn keyword vimCommand contained	al[l] argg[lobal] b[uffer] bf[irst] br[ewind] bufdo c[hange] caddf[ile] cbel[ow] ce[nter] cgetb[uffer] chi[story] cmapc[lear] col[der] conf[irm] cr[ewind] cw[indow] delc[ommand] deletp di[splay] diffs[plit] dl dr[op] ec elsei[f] endt[ry] exp filetype fix[del] for gui helpg[rep] ia imp is[earch] kee[pmarks] lNf[ile] laddf[ile] lbe[fore] lcs lex[pr] lgete[xpr] lla[st] lnew[er] lockv[ar] ls lvimgrepa[dd] mat[ch] mkv[imrc] nb[key] noautocmd o[pen] p[rint] perld[o] pro ptN[ext] ptp[revious] py3do python3 qa[ll] redr[aw] retu[rn] rubyd[o] sIe sN[ext] sb[uffer] sbp[revious] sci scs sf[ind] sgi si sim[alt] sm[agic] sno[magic] spe[llgood] spellu[ndo] sre[wind] st[op] stopi[nsert] sunmenu sync tab tabfir[st] tabp[revious] tcl th[row] tlnoremenu tn[ext] ts[elect] undoj[oin] up[date] vi[sual]
+syn keyword vimCommand contained	a ar[gs] argl[ocal] ba[ll] bl[ast] brea[k] buffers ca caf[ter] cbo[ttom] cex[pr] cgete[xpr] cl[ist] cn[ext] colo[rscheme] cons[t] cs d[elete] delel delf[unction] dif[fupdate] difft[his] dli[st] ds[earch] echoc[onsole] em[enu] endw[hile] export filt[er] fo[ld] fu[nction] gvim helpt[ags] iabc[lear] import isp[lit] keepa l[ist] laf[ter] lbel[ow] lcscope lf[ile] lgr[ep] lli[st] lnf[ile] lol[der] lt[ag] lw[indow] menut[ranslate] mkvie[w] nbc[lose] noh[lsearch] ol[dfiles] pa[ckadd] po[p] prof[ile] pta[g] ptr[ewind] py3f[ile] pythonx quita[ll] redraws[tatus] rew[ind] rubyf[ile] sIg sa[rgument] sba[ll] sbr[ewind] scl scscope sfir[st] sgl sic sin sm[ap] snoreme spelld[ump] spellw[rong] srg sta[g] sts[elect] sus[pend] syncbind tabN[ext] tabl[ast] tabr[ewind] tcld[o] tj[ump] tlu tno[remap] tu[nmenu] undol[ist] v vie[w] vne[w] wh[ile] wn[ext] wv[iminfo] xmenu xunme
+syn keyword vimCommand contained	ab arga[dd] argu[ment] bad[d] bm[odified] breaka[dd] bun[load] cabc[lear] cal[l] cc cf[ile] changes cla[st] cnew[er] com cope[n] cscope debug delep dell diffg[et] dig[raphs] do dsp[lit] echoe[rr] en[dif] ene[w] exu[sage] fin[d] foldc[lose] g h[elp] hi if in iuna[bbrev] keepalt la[st] lan[guage] lbo[ttom] ld[o] lfdo lgrepa[dd] lma lo[adview] lop[en] lua m[ove] mes[sages] mod[e] nbs[tart] nor omapc[lear] packl[oadall] popu[p] profd[el] ptf[irst] pts[elect] py3f[ile] pyx r[ead] redrawt[abline] ri[ght] rundo sIl sal[l] sbf[irst] sc scp se[t] sg sgn sie sip sme snoremenu spelli[nfo] spr[evious] sri star[tinsert] substitutepattern sv[iew] syntime tabc[lose] tabm[ove] tabs tclf[ile] tl[ast] tlunmenu to[pleft] tunma[p] unh[ide] var vim9[cmd] vs[plit] win[size] wp[revious] x[it] xnoreme xunmenu
+syn keyword vimCommand contained	abc[lear] argd[elete] as[cii] balt bn[ext] breakd[el] bw[ipeout] cabo[ve] cat[ch] ccl[ose] cfdo chd[ir] class cnf[ile] comc[lear] cp[revious] cstag debugg[reedy] deletel delm[arks] diffo[ff] dir doau e[dit] echom[sg] enddef eval f[ile] fina[lly] foldd[oopen] go[to] ha[rdcopy] hid[e] ij[ump] inor j[oin] keepj[umps] lab[ove] lat lc[d] le[ft] lfir[st] lh[elpgrep] lmak[e] loadk lp[revious] luado ma[rk] mk[exrc] mz[scheme] new nore on[ly] pc[lose] pp[op] promptf[ind] ptj[ump] pu[t] py[thon] pyxdo rec[over] reg[isters] rightb[elow] rv[iminfo] sIn san[dbox] sbl[ast] scI scr[iptnames] setf[iletype] sgI sgp sig sir smenu so[urce] spellr[are] sr srl startg[replace] substituterepeat sw[apname] t tabd[o] tabn[ext] tags te[aroff] tlm tm[enu] tp[revious] type unl ve[rsion] vim9s[cript] wN[ext] winc[md] wq xa[ll] xnoremenu xwininfo
+syn keyword vimCommand contained	abo[veleft] argdo au bd[elete] bo[tright] breakl[ist] cN[ext] cad[dbuffer] cb[uffer] cd cfir[st] che[ckpath] cle[arjumps] cnor comp[iler] cpf[ile] cun def deletep delp diffp[atch] disa[ssemble] doaut ea echon endf[unction] ex files fini[sh] folddoc[losed] gr[ep] helpc[lose] his[tory] il[ist] interface ju[mps] keepp[atterns] lad[dexpr] later lch[dir] lefta[bove] lg[etfile] lhi[story] lmapc[lear] loadkeymap lpf[ile] luafile mak[e] mks[ession] mzf[ile] nmapc[lear] nos[wapfile] opt[ions] pe[rl] pre[serve] promptr[epl] ptl[ast] pw[d] pydo pyxfile red[o] res[ize] ru[ntime] sI sIp sav[eas] sbm[odified] sce scripte[ncoding] setg[lobal] sgc sgr sign sl[eep] smile sor[t] spellr[epall] srI srn startr[eplace] sun[hide] sy tN[ext] tabe[dit] tabnew tc[d] ter[minal] tlmenu tma[p] tr[ewind] u[ndo] unlo[ckvar] verb[ose] vim[grep] w[rite] windo wqa[ll] xmapc[lear] xprop y[ank]
+syn keyword vimCommand contained	addd arge[dit] bN[ext] bel[owright] bp[revious] bro[wse] cNf[ile] cadde[xpr] cbe[fore] cdo cg[etfile] checkt[ime] clo[se] co[py] con[tinue] cq[uit] cuna[bbrev] defc[ompile] deletl dep diffpu[t] dj[ump] dp earlier el[se] endfo[r] exi[t] filet fir[st] foldo[pen] grepa[dd] helpf[ind] i imapc[lear] intro k lN[ext] laddb[uffer] lb[uffer] lcl[ose] leg[acy] lgetb[uffer] ll lne[xt] loc[kmarks] lr[ewind] lv[imgrep] marks mksp[ell] n[ext] noa nu[mber] ownsyntax ped[it] prev[ious] ps[earch] ptn[ext] py3 pyf[ile] q[uit] redi[r] ret[ab] rub[y] sIc sIr sbN[ext] sbn[ext] scg scriptv[ersion] setl[ocal] sge sh[ell] sil[ent] sla[st] sn[ext] sp[lit] spellr[rare] src srp stj[ump] sunme syn ta[g] tabf[ind] tabo[nly] tch[dir] tf[irst] tln tmapc[lear] try una[bbreviate] uns[ilent] vert[ical] vimgrepa[dd] wa[ll] winp[os] wundo xme xr[estore] z[^.=]
+syn keyword vimCommand contained	al[l] argg[lobal] b[uffer] bf[irst] br[ewind] bufdo c[hange] caddf[ile] cbel[ow] ce[nter] cgetb[uffer] chi[story] cmapc[lear] col[der] conf[irm] cr[ewind] cw[indow] delc[ommand] deletp di[splay] diffs[plit] dl dr[op] ec elsei[f] endt[ry] exp filetype fix[del] for gui helpg[rep] ia imp is[earch] kee[pmarks] lNf[ile] laddf[ile] lbe[fore] lcs lex[pr] lgete[xpr] lla[st] lnew[er] lockv[ar] ls lvimgrepa[dd] mat[ch] mkv[imrc] nb[key] noautocmd o[pen] p[rint] perld[o] pro ptN[ext] ptp[revious] py3do python3 qa[ll] redr[aw] retu[rn] rubyd[o] sIe sN[ext] sb[uffer] sbp[revious] sci scs sf[ind] sgi si sim[alt] sm[agic] sno[magic] spe[llgood] spellu[ndo] sre[wind] st[op] stopi[nsert] sunmenu sync tab tabfir[st] tabp[revious] tcl th[row] tlnoremenu tn[ext] ts[elect] undoj[oin] up[date] vi[sual] viu[sage]
 syn match   vimCommand contained	"\<z[-+^.=]\=\>"
 syn keyword vimStdPlugin contained	Arguments Asm Break Cfilter Clear Continue DiffOrig Evaluate Finish Gdb Lfilter Man N[ext] Over P[rint] Program Run S Source Step Stop Termdebug TermdebugCommand TOhtml Winbar XMLent XMLns
 
 " vimOptions are caught only when contained in a vimSet {{{2
-syn keyword vimOption contained	acd ambw arshape aw backupskip beval bk bri bufhidden cdpath cindent cm colorcolumn completeopt cp cscopeprg csprg culopt def diffexpr ea ei ep eventignore fdi fenc fileformat fkmap foldexpr foldopen fsync gfw guicursor guitabtooltip hidden hlg imactivatefunc imi inc inex isident keymap langnoremap linespace loadplugins ma matchtime mef mle modelineexpr mousehide mps nu opendevice paste pex pmbfn printencoding pt pythonhome quoteescape renderoptions rlc ruf scb scrolloff selectmode shellquote shiftwidth showmode sj smd spell spl srr startofline suffixes switchbuf ta tagfunc tbi term termwintype tgc titlelen toolbariconsize ttimeout ttymouse twt undofile varsofttabstop verbosefile viminfofile wak weirdinvert wig wildoptions winheight wm wrapscan
-syn keyword vimOption contained	ai anti asd awa balloondelay bevalterm bkc briopt buflisted cedit cink cmdheight columns completepopup cpo cscopequickfix csqf cursorbind define diffopt ead ek equalalways ex fdl fencs fileformats flp foldignore foldtext ft ghr guifont helpfile highlight hls imactivatekey iminsert include inf isk keymodel langremap lisp lpl macatsui maxcombine menc mls modelines mousem msm number operatorfunc pastetoggle pexpr popt printexpr pumheight pythonthreedll rdt report rnu ruler scf scrollopt sessionoptions shellredir shm showtabline slm sn spellcapcheck splitbelow ss statusline suffixesadd sws tabline taglength tbidi termbidi terse tgst titleold top ttimeoutlen ttyscroll tx undolevels vartabstop vfile virtualedit warn wfh wildchar wim winminheight wmh write
-syn keyword vimOption contained	akm antialias autochdir background ballooneval bex bl brk buftype cf cinkeys cmdwinheight com completeslash cpoptions cscoperelative csre cursorcolumn delcombine digraph eadirection emo equalprg expandtab fdls fex fileignorecase fml foldlevel formatexpr gcr go guifontset helpheight history hlsearch imaf ims includeexpr infercase iskeyword keywordprg laststatus lispwords lrm magic maxfuncdepth menuitems mm modifiable mousemodel mzq numberwidth opfunc patchexpr pfn pp printfont pumwidth pythonthreehome re restorescreen ro rulerformat scl scs sft shellslash shortmess shq sm so spellfile splitright ssl stl sw sxe tabpagemax tagrelative tbis termencoding textauto thesaurus titlestring tpm ttm ttytype uc undoreload vb vi visualbell wb wfw wildcharm winaltkeys winminwidth wmnu writeany
-syn keyword vimOption contained	al ar autoindent backspace balloonevalterm bexpr bo browsedir casemap cfu cino cmp comments concealcursor cpp cscopetag cst cursorline dex dip eb emoji errorbells exrc fdm ff filetype fmr foldlevelstart formatlistpat gd gp guifontwide helplang hk ic imak imsearch incsearch insertmode isp km lazyredraw list ls makeef maxmapdepth mfd mmd modified mouses mzquantum nuw osfiletype patchmode ph preserveindent printheader pvh pyx readonly revins rop runtimepath scr sect sh shelltemp shortname si smartcase softtabstop spelllang spo ssop stmp swapfile sxq tabstop tags tbs termguicolors textmode tildeop tl tr tty tw udf updatecount vbs viewdir vop wc wh wildignore wincolor winptydll wmw writebackup
-syn keyword vimOption contained	aleph arab autoread backup balloonexpr bg bomb bs cb ch cinoptions cms commentstring conceallevel cpt cscopetagorder csto cursorlineopt dg dir ed enc errorfile fcl fdn ffs fillchars fo foldmarker formatoptions gdefault grepformat guiheadroom hf hkmap icon imc imsf inde is isprint kmp lbr listchars lsp makeencoding maxmem mh mmp more mouseshape mzschemedll odev pa path pheader previewheight printmbcharset pvp pyxversion redrawtime ri rs sb scroll sections shcf shelltype showbreak sidescroll smartindent sol spelloptions spr st sts swapsync syn tag tagstack tc termwinkey textwidth timeout tm ts ttybuiltin twk udir updatetime vdir viewoptions vsts wcm whichwrap wildignorecase window winwidth wop writedelay
-syn keyword vimOption contained	allowrevins arabic autoshelldir backupcopy bdir bh breakat bsdir cc charconvert cinw co compatible confirm crb cscopeverbose csverb cwh dict directory edcompatible encoding errorformat fcs fdo fic fixendofline foldclose foldmethod formatprg gfm grepprg guioptions hh hkmapp iconstring imcmdline imst indentexpr isf joinspaces kp lcs lm luadll makeprg maxmempattern mis mmt mouse mouset mzschemegcdll oft packpath pdev pi previewpopup printmbfont pvw qe regexpengine rightleft rtp sbo scrollbind secure shell shellxescape showcmd sidescrolloff smarttab sp spellsuggest sps sta su swb synmaxcol tagbsearch tal tcldll termwinscroll tf timeoutlen to tsl ttyfast tws ul ur ve vif vts wcr wi wildmenu winfixheight wiv wrap ws
-syn keyword vimOption contained	altkeymap arabicshape autowrite backupdir bdlay bin breakindent bsk ccv ci cinwords cocu complete copyindent cryptmethod csl cuc debug dictionary display ef endofline esckeys fdc fdt fileencoding fixeol foldcolumn foldminlines fp gfn gtl guipty hi hkp ignorecase imd imstatusfunc indentkeys isfname js langmap linebreak lmap lw mat maxmemtot mkspellmem mod mousef mousetime nf ofu para penc pm previewwindow printoptions pw qftf relativenumber rightleftcmd ru sbr scrollfocus sel shellcmdflag shellxquote showfulltag signcolumn smc spc spf sr stal sua swf syntax tagcase tb tenc termwinsize tfu title toolbar tsr ttym twsl undodir ut verbose viminfo wa wd wic wildmode winfixwidth wiw wrapmargin ww
-syn keyword vimOption contained	ambiwidth ari autowriteall backupext belloff binary breakindentopt bt cd cin clipboard cole completefunc cot cscopepathcomp cspc cul deco diff dy efm eol et fde fen fileencodings fk foldenable foldnestmax fs gfs gtt guitablabel hid hl im imdisable imstyle indk isi key langmenu lines lnr lz matchpairs mco ml modeline mousefocus mp nrformats omnifunc paragraphs perldll pmbcs printdevice prompt pythondll quickfixtextfunc remap rl rubydll sc scrolljump selection shellpipe shiftround showmatch siso
+syn keyword vimOption contained	acd ambw arshape aw backupskip beval bk bri bufhidden cdpath cindent cm colorcolumn completeopt cp cscopeprg csprg culopt def diffexpr ea ei ep eventignore fdi fenc fileformat fkmap foldexpr foldopen fsync gfw gtt guipty hi hkp ignorecase imd imstatusfunc indentkeys isfname js langmap linebreak lmap lw mat maxmemtot mkspellmem mod mousef mousetime nf ofu para penc pm previewwindow printoptions pw qftf relativenumber rightleftcmd ru sbr scrollfocus sel shellcmdflag shellxquote showfulltag signcolumn smc spell splitbelow ssl stmp swapfile sxq tabstop tags tbs termguicolors textmode thesaurusfunc titlestring top ttimeout ttymouse twt undofile varsofttabstop verbosefile viminfofile wak weirdinvert wig wildoptions winheight wm wrapscan
+syn keyword vimOption contained	ai anti asd awa balloondelay bevalterm bkc briopt buflisted cedit cink cmdheight columns completepopup cpo cscopequickfix csqf cursorbind define diffopt ead ek equalalways ex fdl fencs fileformats flp foldignore foldtext ft ghr guicursor guitablabel hid hl im imdisable imstyle indk isi key langmenu lines lnr lz matchpairs mco ml modeline mousefocus mp nrformats omnifunc paragraphs perldll pmbcs printdevice prompt pythondll quickfixtextfunc remap rl rubydll sc scrolljump selection shellpipe shiftround showmatch siso smd spellcapcheck splitright ssop sts swapsync syn tag tagstack tc termwinkey textwidth tildeop titlestring option to hi "there" tpm ttimeoutlen ttyscroll tx undolevels vartabstop vfile virtualedit warn wfh wildchar wim winminheight wmh write
+syn keyword vimOption contained	akm antialias autochdir background ballooneval bex bl brk buftype cf cinkeys cmdwinheight com completeslash cpoptions cscoperelative csre cursorcolumn delcombine digraph eadirection emo equalprg expandtab fdls fex fileignorecase fml foldlevel formatexpr gcr gli guifont guitabtooltip hidden hlg imactivatefunc imi inc inex isident keymap langnoremap linespace loadplugins ma matchtime mef mle modelineexpr mousehide mps nu opendevice paste pex pmbfn printencoding pt pythonhome quoteescape renderoptions rlc ruf scb scrolloff selectmode shellquote shiftwidth showmode sj sn spellfile spo st su swb synmaxcol tagbsearch tal tcldll termwinscroll tf timeout tl tr ttm ttytype uc undoreload vb vi visualbell wb wfw wildcharm winaltkeys winminwidth wmnu writeany
+syn keyword vimOption contained	al ar autoindent backspace balloonevalterm bexpr bo browsedir casemap cfu cino cmp comments concealcursor cpp cscopetag cst cursorline dex dip eb emoji errorbells exrc fdm ff filetype fmr foldlevelstart formatlistpat gd go guifontset helpfile highlight hls imactivatekey iminsert include inf isk keymodel langremap lisp lpl macatsui maxcombine menc mls modelines mousem msm number operatorfunc pastetoggle pexpr popt printexpr pumheight pythonthreedll rdt report rnu ruler scf scrollopt sessionoptions shellredir shm showtabline slm so spelllang spr sta sua swf syntax tagcase tb tenc termwinsize tfu timeoutlen tm ts tty tw udf updatecount vbs viewdir vop wc wh wildignore wincolor winptydll wmw writebackup
+syn keyword vimOption contained	aleph arab autoread backup balloonexpr bg bomb bs cb ch cinoptions cms commentstring conceallevel cpt cscopetagorder csto cursorlineopt dg dir ed enc errorfile fcl fdn ffs fillchars fo foldmarker formatoptions gdefault gp guifontwide helpheight history hlsearch imaf ims includeexpr infercase iskeyword keywordprg laststatus lispwords lrm magic maxfuncdepth menuitems mm modifiable mousemodel mzq numberwidth opfunc patchexpr pfn pp printfont pumwidth pythonthreehome re restorescreen ro rulerformat scl scs sft shellslash shortmess shq sm softtabstop spelloptions sps stal suffixes switchbuf ta tagfunc tbi term termwintype tgc title to tsl ttybuiltin twk udir updatetime vdir viewoptions vsts wcm whichwrap wildignorecase window winwidth wop writedelay
+syn keyword vimOption contained	allowrevins arabic autoshelldir backupcopy bdir bh breakat bsdir cc charconvert cinw co compatible confirm crb cscopeverbose csverb cwh dict directory edcompatible encoding errorformat fcs fdo fic fixendofline foldclose foldmethod formatprg gfm grepformat guiheadroom helplang hk ic imak imsearch incsearch insertmode isp km lazyredraw list ls makeef maxmapdepth mfd mmd modified mouses mzquantum nuw osfiletype patchmode ph preserveindent printheader pvh pyx readonly revins rop runtimepath scr sect sh shelltemp shortname si smartcase sol spellsuggest sr startofline suffixesadd sws tabline taglength tbidi termbidi terse tgst titlelen toolbar tsr ttyfast tws ul ur ve vif vts wcr wi wildmenu winfixheight wiv wrap ws
+syn keyword vimOption contained	altkeymap arabicshape autowrite backupdir bdlay bin breakindent bsk ccv ci cinwords cocu complete copyindent cryptmethod csl cuc debug dictionary display ef endofline esckeys fdc fdt fileencoding fixeol foldcolumn foldminlines fp gfn grepprg guiligatures hf hkmap icon imc imsf inde is isprint kmp lbr listchars lsp makeencoding maxmem mh mmp more mouseshape mzschemedll odev pa path pheader previewheight printmbcharset pvp pyxversion redrawtime ri rs sb scroll sections shcf shelltype showbreak sidescroll smartindent sp spf srr statusline sw sxe tabpagemax tagrelative tbis termencoding textauto thesaurus titleold toolbariconsize tsrfu ttym twsl undodir ut verbose viminfo wa wd wic wildmode winfixwidth wiw wrapmargin ww
+syn keyword vimOption contained	ambiwidth ari autowriteall backupext belloff binary breakindentopt bt cd cin clipboard cole completefunc cot cscopepathcomp cspc cul deco diff dy efm eol et fde fen fileencodings fk foldenable foldnestmax fs gfs gtl guioptions hh hkmapp iconstring imcmdline imst indentexpr isf joinspaces kp lcs lm luadll makeprg maxmempattern mis mmt mouse mouset mzschemegcdll oft packpath pdev pi previewpopup printmbfont pvw qe regexpengine rightleft rtp sbo scrollbind secure shell shellxescape showcmd sidescrolloff smarttab spc spl ss stl
 
 " vimOptions: These are the turn-off setting variants {{{2
 syn keyword vimOption contained	noacd noallowrevins noantialias noarabic noarshape noautoindent noautowrite noawa noballoonevalterm nobin nobl nobri noci nocompatible nocp nocscopetag nocst nocul nocursorline nodg noea noedcompatible noemoji noequalalways noet noexrc nofileignorecase nofk nofs nogdefault nohidden nohkmapp nohlsearch noignorecase noimcmdline noincsearch noinsertmode nojs nolazyredraw nolisp noloadplugins nolz nomagic nomle nomodelineexpr nomodified nomousef nomousehide nonumber noopendevice nopi nopreviewwindow nopvw norelativenumber norestorescreen nori norl noro noru nosb noscb noscrollbind noscs nosft noshelltemp noshortname noshowfulltag noshowmode nosm nosmartindent nosmd nosol nosplitbelow nospr nossl nostartofline noswapfile nota notagrelative notbi notbs noterse notextmode notgst notimeout noto notr nottybuiltin notx noundofile novisualbell nowarn noweirdinvert nowfw nowildignorecase nowinfixheight nowiv nowrap nowrite nowritebackup
@@ -66,8 +66,8 @@ syn keyword vimErrSetting contained	bioskey biosk conskey consk autoprint beauti
 
 " AutoCmd Events {{{2
 syn case ignore
-syn keyword vimAutoEvent contained	BufAdd BufDelete BufFilePost BufHidden BufNew BufRead BufReadPost BufUnload BufWinLeave BufWrite BufWritePost CmdlineChanged CmdlineEnter CmdlineLeave CmdUndefined CmdwinEnter CmdwinLeave ColorScheme ColorSchemePre CompleteChanged CompleteDone CompleteDonePre CursorHold CursorHoldI CursorMoved CursorMovedI DiffUpdated DirChanged EncodingChanged ExitPre FileAppendCmd FileAppendPost FileAppendPre FileChangedRO FileChangedShell FileChangedShellPost FileEncoding FileReadCmd FileReadPost FileReadPre FileType FileWriteCmd FileWritePost FileWritePre FilterReadPost FilterReadPre FilterWritePost FilterWritePre FocusGained FocusLost FuncUndefined GUIEnter GUIFailed InsertChange InsertCharPre InsertEnter InsertLeave InsertLeavePre MenuPopup OptionSet QuickFixCmdPost QuickFixCmdPre QuitPre RemoteReply SafeState SafeStateAgain SessionLoadPost ShellCmdPost ShellFilterPost SigUSR1 SourceCmd SourcePost SourcePre SpellFileMissing StdinReadPost StdinReadPre SwapExists Syntax TabClosed TabEnter TabLeave TabNew TermChanged TerminalOpen TerminalWinOpen TermResponse TextChanged TextChangedI TextChangedP TextYankPost User VimEnter VimLeave VimLeavePre VimResized VimResume VimSuspend WinEnter WinLeave WinNew
-syn keyword vimAutoEvent contained	BufCreate BufEnter BufFilePre BufLeave BufNewFile BufReadCmd BufReadPre BufWinEnter BufWipeout BufWriteCmd BufWritePre
+syn keyword vimAutoEvent contained	BufAdd BufDelete BufFilePost BufHidden BufNew BufRead BufReadPost BufUnload BufWinLeave BufWrite BufWritePost CmdlineChanged CmdlineLeave CmdwinEnter ColorScheme ColorSchemePre CompleteChanged CompleteDone CompleteDonePre CursorHold CursorHoldI CursorMoved CursorMovedI DiffUpdated DirChanged EncodingChanged ExitPre FileAppendCmd FileAppendPost FileAppendPre FileChangedRO FileChangedShell FileChangedShellPost FileEncoding FileExplorer FileReadCmd FileReadPost FileReadPre FileType FileWriteCmd FileWritePost FileWritePre FilterReadPost FilterReadPre FilterWritePost FilterWritePre FocusGained FocusLost FuncUndefined GUIEnter GUIFailed InsertChange InsertCharPre InsertEnter InsertLeave InsertLeavePre MenuPopup ModeChanged OptionSet QuickFixCmdPost QuickFixCmdPre QuitPre RemoteReply SafeState SafeStateAgain SessionLoadPost ShellCmdPost ShellFilterPost SigUSR1 SourceCmd SourcePost SourcePre SpellFileMissing StdinReadPost StdinReadPre SwapExists Syntax TabClosed TabEnter TabLeave TabNew TermChanged TerminalOpen TerminalWinOpen TermResponse TextChanged TextChangedI TextChangedP TextYankPost User VimEnter VimLeave VimLeavePre VimResized VimResume VimSuspend WinClosed WinEnter WinLeave WinNew
+syn keyword vimAutoEvent contained	BufCreate BufEnter BufFilePre BufLeave BufNewFile BufReadCmd BufReadPre BufWinEnter BufWipeout BufWriteCmd BufWritePre CmdlineEnter CmdUndefined CmdwinLeave
 
 " Highlight commonly used Groupnames {{{2
 syn keyword vimGroup contained	Comment Constant String Character Number Boolean Float Identifier Function Statement Conditional Repeat Label Operator Keyword Exception PreProc Include Define Macro PreCondit Type StorageClass Structure Typedef Special SpecialChar Tag Delimiter SpecialComment Debug Underlined Ignore Error Todo
@@ -78,12 +78,12 @@ syn match vimHLGroup contained	"Conceal"
 syn case match
 
 " Function Names {{{2
-syn keyword vimFuncName contained	abs argc assert_equal assert_match atan browsedir bufname byteidxcomp charcol ch_evalexpr ch_logfile ch_sendraw complete cos deepcopy digraph_get environ exepath extend finddir fmod foldtext garbagecollect getchar getcmdpos getcursorcharpos getfsize getline getpid getregtype gettext getwinvar has_key histget iconv inputlist interrupt isnan job_start js_encode libcall list2str log mapcheck matchaddpos matchfuzzypos menu_info nextnonblank popup_atcursor popup_dialog popup_getoptions popup_menu popup_show prompt_setcallback prop_clear prop_type_change pumvisible range reduce reltimestr remote_send resolve screenchar screenstring searchpairpos setbufvar setcursorcharpos setmatches settabwinvar shiftwidth sign_place simplify sound_clear spellbadword state strcharpart stridx strridx swapinfo synIDtrans tabpagenr tanh term_getaltscreen term_getline term_gettty term_setansicolors term_start test_garbagecollect_now test_ignore_error test_null_job test_override test_srand_seed timer_start tr undofile visualmode win_execute winheight winnr win_splitmove
-syn keyword vimFuncName contained	acos argidx assert_equalfile assert_nobeep atan2 bufadd bufnr call charidx ch_evalraw ch_open ch_setoptions complete_add cosh delete digraph_getlist escape exists extendnew findfile fnameescape foldtextresult get getcharmod getcmdtype getcwd getftime getloclist getpos gettabinfo getwininfo glob haslocaldir histnr indent inputrestore invert items job_status json_decode libcallnr listener_add log10 mapnew matcharg matchlist min nr2char popup_beval popup_filter_menu popup_getpos popup_move pow prompt_setinterrupt prop_find prop_type_delete py3eval readblob reg_executing remote_expr remote_startserver reverse screenchars search searchpos setcellwidths setenv setpos settagstack sign_define sign_placelist sin soundfold spellsuggest str2float strchars string strtrans swapname synstack tabpagewinnr tempname term_getansicolors term_getscrolled terminalprops term_setapi term_wait test_garbagecollect_soon test_null_blob test_null_list test_refcount test_unknown timer_stop trim undotree wildmenumode win_findbuf win_id2tabwin winrestcmd winwidth
-syn keyword vimFuncName contained	add arglistid assert_exception assert_notequal balloon_gettext bufexists bufwinid ceil ch_canread ch_getbufnr ch_read ch_status complete_check count deletebufline digraph_set eval exists_compiled feedkeys flatten fnamemodify foreground getbufinfo getcharpos getcmdwintype getenv getftype getmarklist getqflist gettabvar getwinpos glob2regpat hasmapto hlexists index inputsave isdirectory job_getchannel job_stop json_encode line listener_flush luaeval mapset matchdelete matchstr mkdir or popup_clear popup_filter_yesno popup_hide popup_notification prevnonblank prompt_setprompt prop_list prop_type_get pyeval readdir reg_recording remote_foreground remove round screencol searchcount server2client setcharpos setfperm setqflist setwinvar sign_getdefined sign_undefine sinh sound_playevent split str2list strdisplaywidth strlen strwidth synconcealed system tagfiles term_dumpdiff term_getattr term_getsize term_list term_setkill test_alloc_fail test_getvalue test_null_channel test_null_partial test_scrollbar test_void timer_stopall trunc uniq winbufnr win_getid win_id2win winrestview wordcount
-syn keyword vimFuncName contained	and argv assert_fails assert_notmatch balloon_show buflisted bufwinnr changenr ch_close ch_getjob ch_readblob cindent complete_info cscope_connection did_filetype digraph_setlist eventhandler exp filereadable flattennew foldclosed fullcommand getbufline getcharsearch getcompletion getfontname getimstatus getmatches getreg gettabwinvar getwinposx globpath histadd hlID input inputsecret isinf job_info join keys line2byte listener_remove map match matchend matchstrpos mode pathshorten popup_close popup_findinfo popup_list popup_setoptions printf prop_add prop_remove prop_type_list pyxeval readdirex reltime remote_peek rename rubyeval screenpos searchdecl serverlist setcharsearch setline setreg sha256 sign_getplaced sign_unplace slice sound_playfile sqrt str2nr strftime strpart submatch synID systemlist taglist term_dumpload term_getcursor term_getstatus term_scrape term_setrestore test_autochdir test_gui_drop_files test_null_dict test_null_string test_setmouse timer_info tolower type values wincol win_gettype winlayout winsaveview writefile
-syn keyword vimFuncName contained	append asin assert_false assert_report balloon_split bufload byte2line char2nr ch_close_in ch_info ch_readraw clearmatches confirm cursor diff_filler echoraw executable expand filewritable float2nr foldclosedend funcref getbufvar getcharstr getcurpos getfperm getjumplist getmousepos getreginfo gettagstack getwinposy has histdel hostname inputdialog insert islocked job_setoptions js_decode len lispindent localtime maparg matchadd matchfuzzy max mzeval perleval popup_create popup_findpreview popup_locate popup_settext prompt_getprompt prop_add_list prop_type_add pum_getpos rand readfile reltimefloat remote_read repeat screenattr screenrow searchpair setbufline setcmdpos setloclist settabvar shellescape sign_jump sign_unplacelist sort sound_stop srand strcharlen strgetchar strptime substitute synIDattr tabpagebuflist tan term_dumpwrite term_getjob term_gettitle term_sendkeys term_setsize test_feedinput test_gui_mouse_event test_null_function test_option_not_set test_settime timer_pause toupper typename virtcol windowsversion win_gotoid winline win_screenpos xor
-syn keyword vimFuncName contained	appendbufline assert_beeps assert_inrange assert_true browse bufloaded byteidx charclass chdir ch_log ch_sendexpr col copy debugbreak diff_hlID empty execute expandcmd filter floor foldlevel function getchangelist getcmdline
+syn keyword vimFuncName contained	abs argc assert_equal assert_match atan browse bufloaded byteidx charclass chdir ch_log ch_sendexpr col copy debugbreak diff_hlID empty execute expandcmd filter floor foldlevel function getchangelist getcmdline getcursorcharpos getftime getmarklist getreg gettabwinvar getwinposx globpath histadd hlget indent inputrestore invert items job_status json_decode libcallnr list2str log mapcheck matchaddpos matchfuzzypos menu_info nextnonblank popup_atcursor popup_dialog popup_getoptions popup_menu popup_show prompt_setcallback prop_clear prop_type_change pumvisible range reduce reltimestr remote_send resolve screenchar screenstring searchpairpos setbufvar setcursorcharpos setmatches settabwinvar shiftwidth sign_place simplify sound_clear spellbadword state strcharpart stridx strridx swapinfo synIDtrans tabpagenr tanh term_getaltscreen term_getline term_gettty term_setansicolors term_start test_garbagecollect_now test_ignore_error test_null_job test_override test_srand_seed timer_start tr undofile visualmode win_execute winheight winnr win_splitmove
+syn keyword vimFuncName contained	acos argidx assert_equalfile assert_nobeep atan2 browsedir bufname byteidxcomp charcol ch_evalexpr ch_logfile ch_sendraw complete cos deepcopy digraph_get environ exepath extend finddir fmod foldtext garbagecollect getchar getcmdpos getcwd getftype getmatches getreginfo gettagstack getwinposy has histdel hlID index inputsave isdirectory job_getchannel job_stop json_encode line listener_add log10 mapnew matcharg matchlist min nr2char popup_beval popup_filter_menu popup_getpos popup_move pow prompt_setinterrupt prop_find prop_type_delete py3eval readblob reg_executing remote_expr remote_startserver reverse screenchars search searchpos setcellwidths setenv setpos settagstack sign_define sign_placelist sin soundfold spellsuggest str2float strchars string strtrans swapname synstack tabpagewinnr tempname term_getansicolors term_getscrolled terminalprops term_setapi term_wait test_garbagecollect_soon test_null_blob test_null_list test_refcount test_unknown timer_stop trim undotree wildmenumode win_findbuf win_id2tabwin winrestcmd winwidth
+syn keyword vimFuncName contained	add arglistid assert_exception assert_notequal balloon_gettext bufadd bufnr call charidx ch_evalraw ch_open ch_setoptions complete_add cosh delete digraph_getlist escape exists extendnew findfile fnameescape foldtextresult get getcharmod getcmdtype getenv getimstatus getmousepos getregtype gettext getwinvar has_key histget hlset input inputsecret isinf job_info join keys line2byte listener_flush luaeval mapset matchdelete matchstr mkdir or popup_clear popup_filter_yesno popup_hide popup_notification prevnonblank prompt_setprompt prop_list prop_type_get pyeval readdir reg_recording remote_foreground remove round screencol searchcount server2client setcharpos setfperm setqflist setwinvar sign_getdefined sign_undefine sinh sound_playevent split str2list strdisplaywidth strlen strwidth synconcealed system tagfiles term_dumpdiff term_getattr term_getsize term_list term_setkill test_alloc_fail test_getvalue test_null_channel test_null_partial test_scrollbar test_void timer_stopall trunc uniq winbufnr win_getid win_id2win winrestview wordcount
+syn keyword vimFuncName contained	and argv assert_fails assert_notmatch balloon_show bufexists bufwinid ceil ch_canread ch_getbufnr ch_read ch_status complete_check count deletebufline digraph_set eval exists_compiled feedkeys flatten fnamemodify foreground getbufinfo getcharpos getcmdwintype getfontname getjumplist getpid gettabinfo getwininfo glob haslocaldir histnr hostname inputdialog insert islocked job_setoptions js_decode len lispindent listener_remove map match matchend matchstrpos mode pathshorten popup_close popup_findinfo popup_list popup_setoptions printf prop_add prop_remove prop_type_list pyxeval readdirex reltime remote_peek rename rubyeval screenpos searchdecl serverlist setcharsearch setline setreg sha256 sign_getplaced sign_unplace slice sound_playfile sqrt str2nr strftime strpart submatch synID systemlist taglist term_dumpload term_getcursor term_getstatus term_scrape term_setrestore test_autochdir test_gui_drop_files test_null_dict test_null_string test_setmouse timer_info tolower type values wincol win_gettype winlayout winsaveview writefile
+syn keyword vimFuncName contained	append asin assert_false assert_report balloon_split buflisted bufwinnr changenr ch_close ch_getjob ch_readblob cindent complete_info cscope_connection did_filetype digraph_setlist eventhandler exp filereadable flattennew foldclosed fullcommand getbufline getcharsearch getcompletion getfperm getline getpos gettabvar getwinpos glob2regpat hasmapto hlexists iconv inputlist interrupt isnan job_start js_encode libcall list2blob localtime maparg matchadd matchfuzzy max mzeval perleval popup_create popup_findpreview popup_locate popup_settext prompt_getprompt prop_add_list prop_type_add pum_getpos rand readfile reltimefloat remote_read repeat screenattr screenrow searchpair setbufline setcmdpos setloclist settabvar shellescape sign_jump sign_unplacelist sort sound_stop srand strcharlen strgetchar strptime substitute synIDattr tabpagebuflist tan term_dumpwrite term_getjob term_gettitle term_sendkeys term_setsize test_feedinput test_gui_mouse_event test_null_function test_option_not_set test_settime timer_pause toupper typename virtcol windowsversion win_gotoid winline win_screenpos xor
+syn keyword vimFuncName contained	appendbufline assert_beeps assert_inrange assert_true blob2list bufload byte2line char2nr ch_close_in ch_info ch_readraw clearmatches confirm cursor diff_filler echoraw executable expand filewritable float2nr foldclosedend funcref getbufvar getcharstr getcurpos getfsize getloclist getqflist
 
 "--- syntax here and above generated by mkvimvim ---
 " Special Vim Highlighting (not automatic) {{{1
@@ -188,11 +188,13 @@ syn match vimFBVar      contained   "\<[bwglstav]:\h[a-zA-Z0-9#_]*\>"
 syn keyword vimCommand  contained	in
 
 " Insertions And Appends: insert append {{{2
+"   (buftype != nofile test avoids having append, change, insert show up in the command window)
 " =======================
-syn region vimInsert	matchgroup=vimCommand start="^[: \t]*\(\d\+\(,\d\+\)\=\)\=a\%[ppend]$"		matchgroup=vimCommand end="^\.$""
-syn region vimInsert	matchgroup=vimCommand start="^[: \t]*\(\d\+\(,\d\+\)\=\)\=c\%[hange]$"		matchgroup=vimCommand end="^\.$""
-syn region vimInsert	matchgroup=vimCommand start="^[: \t]*\(\d\+\(,\d\+\)\=\)\=i\%[nsert]$"		matchgroup=vimCommand end="^\.$""
-syn region vimInsert	matchgroup=vimCommand start="^[: \t]*\(\d\+\(,\d\+\)\=\)\=starti\%[nsert]$"	matchgroup=vimCommand end="^\.$""
+if &buftype != 'nofile'
+ syn region vimInsert	matchgroup=vimCommand start="^[: \t]*\(\d\+\(,\d\+\)\=\)\=a\%[ppend]$"		matchgroup=vimCommand end="^\.$""
+ syn region vimInsert	matchgroup=vimCommand start="^[: \t]*\(\d\+\(,\d\+\)\=\)\=c\%[hange]$"		matchgroup=vimCommand end="^\.$""
+ syn region vimInsert	matchgroup=vimCommand start="^[: \t]*\(\d\+\(,\d\+\)\=\)\=i\%[nsert]$"		matchgroup=vimCommand end="^\.$""
+endif
 
 " Behave! {{{2
 " =======
@@ -228,9 +230,9 @@ syn keyword vimAugroupKey contained	aug[roup]
 " Operators: {{{2
 " =========
 syn cluster	vimOperGroup	contains=vimEnvvar,vimFunc,vimFuncVar,vimOper,vimOperParen,vimNumber,vimString,vimType,vimRegister,vimContinue,vim9Comment
-syn match	vimOper	"\%#=1\(==\|!=\|>=\|<=\|=\~\|!\~\|>\|<\|=\)[?#]\{0,2}"	skipwhite nextgroup=vimString,vimSpecFile
-syn match	vimOper	"\(\<is\|\<isnot\)[?#]\{0,2}\>"			skipwhite nextgroup=vimString,vimSpecFile
 syn match	vimOper	"||\|&&\|[-+.!]"				skipwhite nextgroup=vimString,vimSpecFile
+syn match	vimOper	"\%#=1\(==\|!=\|>=\|<=\|=\~\|!\~\|>\|<\|=\|!\~#\)[?#]\{0,2}"	skipwhite nextgroup=vimString,vimSpecFile
+syn match	vimOper	"\(\<is\|\<isnot\)[?#]\{0,2}\>"			skipwhite nextgroup=vimString,vimSpecFile
 syn region	vimOperParen 	matchgroup=vimParenSep	start="(" end=")" contains=vimoperStar,@vimOperGroup
 syn region	vimOperParen	matchgroup=vimSep		start="#\={" end="}" contains=@vimOperGroup nextgroup=vimVar,vimFuncVar
 if !exists("g:vimsyn_noerror") && !exists("g:vimsyn_noopererror")
@@ -397,7 +399,7 @@ syn match	vimSetMod	contained	"&vim\=\|[!&?<]\|all&"
 " Let: {{{2
 " ===
 syn keyword	vimLet	let	unl[et]	skipwhite nextgroup=vimVar,vimFuncVar,vimLetHereDoc
-VimFoldh syn region vimLetHereDoc	matchgroup=vimLetHereDocStart start='=<<\s\+\%(trim\>\)\=\s*\z(\L\S*\)'	matchgroup=vimLetHereDocStop end='^\s*\z1\s*$'	contains=vimComment,vim9Comment
+VimFoldh syn region vimLetHereDoc	matchgroup=vimLetHereDocStart start='=<<\s\+\%(trim\>\)\=\s*\z(\L\S*\)'	matchgroup=vimLetHereDocStop end='^\s*\z1\s*$'
 
 " Abbreviations: {{{2
 " =============