patch 8.2.3846: no error when using control character for 'lcs' or 'fcs'

Problem:    No error when using control character for 'lcs' or 'fcs'.
Solution:   Use char2cells() to check the width. (closes #9369)

.github/CODEOWNERS

@@ -73,6 +73,7 @@ runtime/ftplugin/awk.vim		@dkearns
 runtime/ftplugin/basic.vim		@dkearns
 runtime/ftplugin/bst.vim		@tpope
 runtime/ftplugin/cfg.vim		@chrisbra
+runtime/ftplugin/clojure.vim		@axvr
 runtime/ftplugin/csh.vim		@dkearns
 runtime/ftplugin/css.vim		@dkearns
 runtime/ftplugin/cucumber.vim		@tpope
@@ -88,10 +89,13 @@ runtime/ftplugin/gitsendemail.vim	@tpope
 runtime/ftplugin/gprof.vim		@dpelle
 runtime/ftplugin/haml.vim		@tpope
 runtime/ftplugin/hgcommit.vim		@k-takata
+runtime/ftplugin/i3config.vim		@hiqua
+runtime/ftplugin/indent.vim		@dkearns
 runtime/ftplugin/javascript.vim		@dkearns
 runtime/ftplugin/javascriptreact.vim	@dkearns
 runtime/ftplugin/kconfig.vim		@chrisbra
 runtime/ftplugin/liquid.vim		@tpope
+runtime/ftplugin/lua.vim		@dkearns
 runtime/ftplugin/m3build.vim		@dkearns
 runtime/ftplugin/m3quake.vim		@dkearns
 runtime/ftplugin/markdown.vim		@tpope
@@ -107,9 +111,11 @@ runtime/ftplugin/pbtxt.vim		@lakshayg
 runtime/ftplugin/pdf.vim		@tpope
 runtime/ftplugin/ps1.vim		@heaths
 runtime/ftplugin/ps1xml.vim		@heaths
+runtime/ftplugin/routeros.vim		@zainin
 runtime/ftplugin/ruby.vim		@tpope @dkearns
 runtime/ftplugin/sass.vim		@tpope
 runtime/ftplugin/scss.vim		@tpope
+runtime/ftplugin/solution.vim		@dkearns
 runtime/ftplugin/spec.vim		@ignatenkobrain
 runtime/ftplugin/systemverilog.vim	@Kocha
 runtime/ftplugin/tcsh.vim		@dkearns
@@ -122,6 +128,7 @@ runtime/ftplugin/xml.vim		@chrisbra
 runtime/ftplugin/zsh.vim		@chrisbra
 runtime/indent/bst.vim			@tpope
 runtime/indent/cdl.vim			@dkearns
+runtime/indent/clojure.vim		@axvr
 runtime/indent/config.vim		@dkearns
 runtime/indent/css.vim			@dkearns
 runtime/indent/cucumber.vim		@tpope
@@ -179,6 +186,7 @@ runtime/syntax/bst.vim			@tpope
 runtime/syntax/cabal.vim		@coot
 runtime/syntax/cabalconfig.vim		@coot
 runtime/syntax/cabalproject.vim		@coot
+runtime/syntax/clojure.vim		@axvr
 runtime/syntax/cs.vim			@nickspoons
 runtime/syntax/csh.vim			@cecamp
 runtime/syntax/cucumber.vim		@tpope
@@ -202,6 +210,8 @@ runtime/syntax/groff.vim		@jmarshall
 runtime/syntax/haml.vim			@tpope
 runtime/syntax/haskell.vim		@coot
 runtime/syntax/hgcommit.vim		@k-takata
+runtime/syntax/i3config.vim		@hiqua
+runtime/syntax/indent.vim		@dkearns
 runtime/syntax/kconfig.vim		@chrisbra
 runtime/syntax/less.vim			@genoma
 runtime/syntax/lex.vim			@cecamp
@@ -230,6 +240,7 @@ runtime/syntax/ps1.vim			@heaths
 runtime/syntax/ps1xml.vim		@heaths
 runtime/syntax/psl.vim			@danielkho
 runtime/syntax/rc.vim			@chrisbra
+runtime/syntax/routeros.vim		@zainin
 runtime/syntax/rpcgen.vim		@cecamp
 runtime/syntax/ruby.vim			@dkearns
 runtime/syntax/sass.vim			@tpope

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -8,6 +8,11 @@ body:
     attributes:
       value: |
         Thanks for reporting issues of Vim!
+
+        If you want to report a security issue, instead of reporting it here
+        you can alternatively disclose it on
+        [huntr.dev](https://huntr.dev/bounties/disclose/?utm_campaign=vim%2Fvim&utm_medium=social&utm_source=github&target=https%3A%2F%2Fgithub.com%2Fvim%2Fvim).
+        They have rewards in the form of money, swag and CVEs.
         
         To make it easier for us to help you please enter detailed information below.
   - type: textarea
@@ -26,18 +31,23 @@ body:
       placeholder: A clear and concise description of what you expected to happen.
     validations:
       required: true
-  - type: input
-    attributes:
-      label: Operating system
-      description: >
-        Your operating system name, version and desktop environment.
-    validations:
-      required: true
   - type: input
     attributes:
       label: Version of Vim
       description: >
-        The name of your development environment, version. [e.g. GNOME Terminal (v0.0.0000)]
+        Including patch level, use ":version" to see it [e.g. 8.2.1234]
+    validations:
+      required: true
+  - type: textarea
+    attributes:
+      label: Environment
+      description: >
+        OS [e.g. Ubuntu 21.10], terminal [e.g. GNOME Terminal 3.38.1], value of $TERM, shell [e.g. bash 5.1.8]; anything that might matter
+      placeholder: |
+        Operating system:
+        Terminal:
+        Value of $TERM:
+        Shell:
     validations:
       required: true
   - type: textarea

.github/workflows/ci.yml

@@ -75,16 +75,16 @@ jobs:
             libtool-bin \
             libsodium-dev
 
-      - name: Install clang-11
+      - name: Install clang-13
         if: matrix.compiler == 'clang'
         run: |
           wget -O - https://apt.llvm.org/llvm-snapshot.gpg.key | sudo apt-key add -
           . /etc/lsb-release
-          sudo add-apt-repository -y "deb http://apt.llvm.org/${DISTRIB_CODENAME}/ llvm-toolchain-${DISTRIB_CODENAME}-11 main"
-          sudo apt-get install -y clang-11 llvm-11
-          sudo update-alternatives --install /usr/bin/clang clang /usr/bin/clang-11 100
-          sudo update-alternatives --set clang /usr/bin/clang-11
-          sudo update-alternatives --install /usr/bin/llvm-cov llvm-cov /usr/bin/llvm-cov-11 100
+          sudo add-apt-repository -y "deb http://apt.llvm.org/${DISTRIB_CODENAME}/ llvm-toolchain-${DISTRIB_CODENAME}-13 main"
+          sudo apt-get install -y clang-13 llvm-13
+          sudo update-alternatives --install /usr/bin/clang clang /usr/bin/clang-13 100
+          sudo update-alternatives --set clang /usr/bin/clang-13
+          sudo update-alternatives --install /usr/bin/llvm-cov llvm-cov /usr/bin/llvm-cov-13 100
 
       - name: Set up environment
         run: |
@@ -188,6 +188,10 @@ jobs:
           # Append various warning flags to CFLAGS.
           sed -i -f ci/config.mk.sed ${SRCDIR}/auto/config.mk
           sed -i -f ci/config.mk.${CC}.sed ${SRCDIR}/auto/config.mk
+          if [[ ${CC} = clang ]]; then
+            # Suppress some warnings produced by clang 12 and later.
+            sed -i -f ci/config.mk.clang-12.sed ${SRCDIR}/auto/config.mk
+          fi
 
       - name: Build
         if: (!contains(matrix.extra, 'unittests'))
@@ -230,7 +234,7 @@ jobs:
         if: contains(matrix.extra, 'asan') && !cancelled()
         run: |
           for f in $(grep -lR '#[[:digit:]]* *0x[[:digit:]a-fA-F]*' "${LOG_DIR}"); do
-            asan_symbolize-11 -l "$f"
+            asan_symbolize-13 -l "$f"
             false # in order to fail a job
           done
 
@@ -251,7 +255,7 @@ jobs:
     runs-on: macos-latest
 
     env:
-      CC: ${{ matrix.compiler }}
+      CC: clang
       TEST: test
       SRCDIR: ./src
       LEAK_CFLAGS: -DEXITFREE
@@ -260,8 +264,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        features: [tiny, huge]
-        compiler: [clang, gcc]
+        features: [tiny, normal, huge]
 
     steps:
       - uses: actions/checkout@v2
@@ -282,6 +285,8 @@ jobs:
             echo "TEST=testtiny"
             echo "CONFOPT=--disable-gui"
             ;;
+          normal)
+            ;;
           huge)
             echo "CONFOPT=--enable-perlinterp --enable-python3interp --enable-rubyinterp --enable-luainterp --enable-tclinterp"
             ;;
@@ -296,6 +301,10 @@ jobs:
           sed -i.bak -f ci/config.mk.sed ${SRCDIR}/auto/config.mk
           # On macOS, the entity of gcc is clang.
           sed -i.bak -f ci/config.mk.clang.sed ${SRCDIR}/auto/config.mk
+          # Suppress some warnings produced by clang 12 and later.
+          if clang --version | grep -qs 'Apple clang version \(1[3-9]\|[2-9]\)\.'; then
+            sed -i.bak -f ci/config.mk.clang-12.sed ${SRCDIR}/auto/config.mk
+          fi
 
       - name: Build
         env:

Filelist

@@ -7,6 +7,8 @@ SRC_ALL =	\
 		.coveralls.yml \
 		.gitattributes \
 		.github/CODEOWNERS \
+		.github/ISSUE_TEMPLATE/bug_report.yml \
+		.github/ISSUE_TEMPLATE/feature_request.md \
 		.github/workflows/ci.yml \
 		.github/workflows/codeql-analysis.yml \
 		.github/workflows/coverity.yml \
@@ -142,7 +144,7 @@ SRC_ALL =	\
 		src/tag.c \
 		src/term.c \
 		src/terminal.c \
-		src/term.h \
+		src/termdefs.h \
 		src/termlib.c \
 		src/testing.c \
 		src/textformat.c \
@@ -376,6 +378,7 @@ SRC_ALL =	\
 		src/libvterm/t/30state_pen.test \
 		src/libvterm/t/31state_rep.test \
 		src/libvterm/t/32state_flow.test \
+		src/libvterm/t/40state_selection.test \
 		src/libvterm/t/60screen_ascii.test \
 		src/libvterm/t/61screen_unicode.test \
 		src/libvterm/t/62screen_damage.test \

ci/config.mk.clang-12.sed

@@ -0,0 +1,3 @@
+# Clang 12 (or Apple clang 13) and later makes a warning '-Wcompound-token-split-by-macro' enable by default.
+/^PERL_CFLAGS[[:blank:]]*=/s/$/ -Wno-error=compound-token-split-by-macro/
+/^RUBY_CFLAGS[[:blank:]]*=/s/$/ -Wno-error=compound-token-split-by-macro/

runtime/autoload/dist/ft.vim

@@ -1,7 +1,7 @@
 " Vim functions for file type detection
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2020 Aug 17
+" Last Change:	2021 Nov 27
 
 " These functions are moved here from runtime/filetype.vim to make startup
 " faster.
@@ -219,6 +219,23 @@ func dist#ft#FTe()
   endif
 endfunc
 
+" Distinguish between Forth and F#.
+" Provided by Doug Kearns.
+func dist#ft#FTfs()
+  if exists("g:filetype_fs")
+    exe "setf " . g:filetype_fs
+  else
+    let line = getline(nextnonblank(1))
+    " comments and colon definitions
+    if line =~ '^\s*\.\=( ' || line =~ '^\s*\\G\= ' || line =~ '^\\$'
+	  \ || line =~ '^\s*: \S'
+      setf forth
+    else
+      setf fsharp
+    endif
+  endif
+endfunc
+
 " Distinguish between HTML, XHTML and Django
 func dist#ft#FThtml()
   let n = 1
@@ -272,6 +289,8 @@ func dist#ft#FTm()
   " excluding end(for|function|if|switch|while) common to Murphi
   let octave_block_terminators = '\<end\%(_try_catch\|classdef\|enumeration\|events\|methods\|parfor\|properties\)\>'
 
+  let objc_preprocessor = '^\s*#\s*\%(import\|include\|define\|if\|ifn\=def\|undef\|line\|error\|pragma\)\>'
+
   let n = 1
   let saw_comment = 0 " Whether we've seen a multiline comment leader.
   while n < 100
@@ -282,7 +301,7 @@ func dist#ft#FTm()
       " anything more definitive.
       let saw_comment = 1
     endif
-    if line =~ '^\s*\(#\s*\(include\|import\)\>\|@import\>\|//\)'
+    if line =~ '^\s*//' || line =~ '^\s*@import\>' || line =~ objc_preprocessor
       setf objc
       return
     endif
@@ -792,6 +811,23 @@ func dist#ft#Redif()
   endwhile
 endfunc
 
+" This function is called for all files under */debian/patches/*, make sure not
+" to non-dep3patch files, such as README and other text files.
+func dist#ft#Dep3patch()
+  if expand('%:t') ==# 'series'
+    return
+  endif
+
+  for ln in getline(1, 100)
+    if ln =~# '^\%(Description\|Subject\|Origin\|Bug\|Forwarded\|Author\|From\|Reviewed-by\|Acked-by\|Last-Updated\|Applied-Upstream\):'
+      setf dep3patch
+      return
+    elseif ln =~# '^---'
+      " end of headers found. stop processing
+      return
+    endif
+  endfor
+endfunc
 
 " Restore 'cpoptions'
 let &cpo = s:cpo_save

runtime/autoload/zip.vim

@@ -1,7 +1,7 @@
 " zip.vim: Handles browsing zipfiles
 "            AUTOLOAD PORTION
-" Date:		Jan 07, 2020
-" Version:	31
+" Date:		Nov 08, 2021
+" Version:	32
 " Maintainer:	Charles E Campbell <NcampObell@SdrPchip.AorgM-NOSPAM>
 " License:	Vim License  (see vim's :help license)
 " Copyright:    Copyright (C) 2005-2019 Charles E. Campbell {{{1
@@ -20,7 +20,7 @@
 if &cp || exists("g:loaded_zip")
  finish
 endif
-let g:loaded_zip= "v31"
+let g:loaded_zip= "v32"
 if v:version < 702
  echohl WarningMsg
  echo "***warning*** this version of zip needs vim 7.2 or later"
@@ -115,7 +115,13 @@ fun! zip#Browse(zipfile)
   setlocal bufhidden=hide
   setlocal nobuflisted
   setlocal nowrap
-  set ft=tar
+
+  " Oct 12, 2021: need to re-use Bram's syntax/tar.vim.
+  " Setting the filetype to zip doesn't do anything (currently),
+  " but it is perhaps less confusing to curious perusers who do
+  " a :echo &ft
+  setf zip
+  run! syntax/tar.vim
 
   " give header
   call append(0, ['" zip.vim version '.g:loaded_zip,
@@ -187,8 +193,8 @@ fun! s:ZipBrowseSelect()
    wincmd _
   endif
   let s:zipfile_{winnr()}= curfile
-"  call Decho("exe e ".fnameescape("zipfile:".zipfile.'::'.fname))
-  exe "noswapfile e ".fnameescape("zipfile:".zipfile.'::'.fname)
+"  call Decho("exe e ".fnameescape("zipfile://".zipfile.'::'.fname))
+  exe "noswapfile e ".fnameescape("zipfile://".zipfile.'::'.fname)
   filetype detect
 
   let &report= repkeep
@@ -203,11 +209,11 @@ fun! zip#Read(fname,mode)
   set report=10
 
   if has("unix")
-   let zipfile = substitute(a:fname,'zipfile:\(.\{-}\)::[^\\].*$','\1','')
-   let fname   = substitute(a:fname,'zipfile:.\{-}::\([^\\].*\)$','\1','')
+   let zipfile = substitute(a:fname,'zipfile://\(.\{-}\)::[^\\].*$','\1','')
+   let fname   = substitute(a:fname,'zipfile://.\{-}::\([^\\].*\)$','\1','')
   else
-   let zipfile = substitute(a:fname,'^.\{-}zipfile:\(.\{-}\)::[^\\].*$','\1','')
-   let fname   = substitute(a:fname,'^.\{-}zipfile:.\{-}::\([^\\].*\)$','\1','')
+   let zipfile = substitute(a:fname,'^.\{-}zipfile://\(.\{-}\)::[^\\].*$','\1','')
+   let fname   = substitute(a:fname,'^.\{-}zipfile://.\{-}::\([^\\].*\)$','\1','')
    let fname   = substitute(fname, '[', '[[]', 'g')
   endif
 "  call Decho("zipfile<".zipfile.">")
@@ -224,7 +230,7 @@ fun! zip#Read(fname,mode)
 
   " the following code does much the same thing as
   "   exe "keepj sil! r! ".g:zip_unzipcmd." -p -- ".s:Escape(zipfile,1)." ".s:Escape(fnameescape(fname),1)
-  " but allows zipfile:... entries in quickfix lists
+  " but allows zipfile://... entries in quickfix lists
   let temp = tempname()
 "  call Decho("using temp file<".temp.">")
   let fn   = expand('%:p')
@@ -296,11 +302,11 @@ fun! zip#Write(fname)
 "  call Decho("current directory now: ".getcwd())
 
   if has("unix")
-   let zipfile = substitute(a:fname,'zipfile:\(.\{-}\)::[^\\].*$','\1','')
-   let fname   = substitute(a:fname,'zipfile:.\{-}::\([^\\].*\)$','\1','')
+   let zipfile = substitute(a:fname,'zipfile://\(.\{-}\)::[^\\].*$','\1','')
+   let fname   = substitute(a:fname,'zipfile://.\{-}::\([^\\].*\)$','\1','')
   else
-   let zipfile = substitute(a:fname,'^.\{-}zipfile:\(.\{-}\)::[^\\].*$','\1','')
-   let fname   = substitute(a:fname,'^.\{-}zipfile:.\{-}::\([^\\].*\)$','\1','')
+   let zipfile = substitute(a:fname,'^.\{-}zipfile://\(.\{-}\)::[^\\].*$','\1','')
+   let fname   = substitute(a:fname,'^.\{-}zipfile://.\{-}::\([^\\].*\)$','\1','')
   endif
 "  call Decho("zipfile<".zipfile.">")
 "  call Decho("fname  <".fname.">")

runtime/colors/tools/check_colors.vim

@@ -226,7 +226,13 @@ fu! Result(err)
   endif
 endfu
 
-call Test_check_colors()
-
-let &cpo = s:save_cpo
-unlet s:save_cpo
+try
+  call Test_check_colors()
+catch
+  echohl ErrorMsg
+  echomsg v:exception
+  echohl NONE
+finally
+  let &cpo = s:save_cpo
+  unlet s:save_cpo
+endtry

runtime/defaults.vim

@@ -1,7 +1,7 @@
 " The default vimrc file.
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last change:	2020 Sep 30
+" Last change:	2021 Nov 17
 "
 " This is loaded if no vimrc file was found.
 " Except when Vim is run with "-u NONE" or "-C".
@@ -96,7 +96,7 @@ if 1
   filetype plugin indent on
 
   " Put these in an autocmd group, so that you can revert them with:
-  " ":augroup vimStartup | au! | augroup END"
+  " ":augroup vimStartup | exe 'au!' | augroup END"
   augroup vimStartup
     au!
 
@@ -111,6 +111,18 @@ if 1
 
   augroup END
 
+  " Quite a few people accidentally type "q:" instead of ":q" and get confused
+  " by the command line window.  Give a hint about how to get out.
+  " If you don't like this you can put this in your vimrc:
+  " ":augroup vimHints | exe 'au!' | augroup END"
+  augroup vimHints
+    au!
+    autocmd CmdwinEnter *
+	  \ echohl Todo | 
+	  \ echo 'You discovered the command-line window! You can close it with ":q".' |
+	  \ echohl None
+  augroup END
+
 endif
 
 " Switch syntax highlighting on when the terminal has colors or when using the

runtime/doc/autocmd.txt

@@ -1,4 +1,4 @@
-*autocmd.txt*   For Vim version 8.2.  Last change: 2021 Oct 04
+*autocmd.txt*   For Vim version 8.2.  Last change: 2021 Nov 20
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -83,7 +83,7 @@ triggered.
 		}
 
 Note: The ":autocmd" command can only be followed by another command when the
-'|' appears before {cmd}.  This works: >
+'|' appears where the pattern is expected.  This works: >
 	:augroup mine | au! BufRead | augroup END
 But this sees "augroup" as part of the defined command: >
 	:augroup mine | au! BufRead * | augroup END
@@ -348,6 +348,7 @@ Name			triggered by ~
 
 |WinNew|		after creating a new window
 |TabNew|		after creating a new tab page
+|WinClosed|		after closing a window
 |TabClosed|		after closing a tab page
 |WinEnter|		after entering another window
 |WinLeave|		before leaving a window
@@ -1280,6 +1281,12 @@ VimResume			When the Vim instance is resumed after being
 VimSuspend			When the Vim instance is suspended.  Only when
 				CTRL-Z was typed inside Vim, not when the
 				SIGSTOP or SIGTSTP signal was sent to Vim.
+							*WinClosed*
+WinClosed			After closing a window.  The pattern is
+				matched against the |window-ID|.  Both
+				<amatch> and <afile> are set to the
+				|window-ID|.  Non-recursive (event cannot
+				trigger itself).
 							*WinEnter*
 WinEnter			After entering another window.  Not done for
 				the first window, when Vim has just started.

runtime/doc/channel.txt

@@ -1,4 +1,4 @@
-*channel.txt*      For Vim version 8.2.  Last change: 2020 Oct 17
+*channel.txt*      For Vim version 8.2.  Last change: 2021 Nov 28
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -101,7 +101,7 @@ Instead of giving a callback with every send call, it can also be specified
 when opening the channel: >
 	call ch_close(channel)
 	let channel = ch_open('localhost:8765', {'callback': "MyHandler"})
-	call ch_sendexpr(channel, 'hello!')
+	call ch_sendexpr(channel, 'hello channel!')
 
 When trying out channels it's useful to see what is going on.  You can tell
 Vim to write lines in log file: >
@@ -132,8 +132,9 @@ When using an IPv6 address, enclose it within square brackets.  E.g.,
 	"raw"  - Use raw messages
 						*channel-callback* *E921*
 "callback"	A function that is called when a message is received that is
-		not handled otherwise.  It gets two arguments: the channel
-		and the received message. Example: >
+		not handled otherwise (e.g. a JSON message with ID zero).  It
+		gets two arguments: the channel and the received message.
+		Example: >
 	func Handle(channel, msg)
 	  echo 'Received: ' . a:msg
 	endfunc

runtime/doc/cmdline.txt

@@ -1,4 +1,4 @@
-*cmdline.txt*   For Vim version 8.2.  Last change: 2021 Aug 06
+*cmdline.txt*   For Vim version 8.2.  Last change: 2021 Dec 04
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -919,15 +919,19 @@ Note: these are typed literally, they are not special keys!
 							*:<amatch>* *<amatch>*
 	<amatch>   When executing autocommands, is replaced with the match for
 		   which this autocommand was executed.  *E497*
-		   It differs from <afile> only when the file name isn't used
-		   to match with (for FileType, Syntax and SpellFileMissing
+		   It differs from <afile> when the file name isn't used to
+		   match with (for FileType, Syntax and SpellFileMissing
 		   events).
+		   When the match is with a file name, it is expanded to the
+		   full path.
 							*:<sfile>* *<sfile>*
 	<sfile>    When executing a ":source" command, is replaced with the
 		   file name of the sourced file.  *E498*
-		   When executing a function, is replaced with the call stack,
-		   as with <stack> (this is for backwards compatibility, using
-		   <stack> is preferred).
+		   When executing a legacy function, is replaced with the call
+		   stack, as with <stack> (this is for backwards
+		   compatibility, using <stack> is preferred).
+		   In Vim9 script using <sfile> in a function gives error
+		   *E1245* .
 		   Note that filename-modifiers are useless when <sfile> is
 		   not used inside a script.
 							*:<stack>* *<stack>*

runtime/doc/editing.txt

@@ -1,4 +1,4 @@
-*editing.txt*   For Vim version 8.2.  Last change: 2021 Oct 16
+*editing.txt*   For Vim version 8.2.  Last change: 2021 Dec 11
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1298,11 +1298,12 @@ Changing directory fails when the current buffer is modified, the '.' flag is
 present in 'cpoptions' and "!" is not used in the command.
 
 							*:cd* *E747* *E472*
-:cd[!]			On non-Unix systems: Print the current directory
-			name.  On Unix systems: Change the current directory
-			to the home directory.  Use |:pwd| to print the
-			current directory on all systems.
-			On Unix systems: clear any window-local directory.
+:cd[!]			On non-Unix systems when 'cdhome' is off: Print the
+			current directory name.
+			Otherwise: Change the current directory to the home
+			directory.  Clear any window-local directory.
+			Use |:pwd| to print the current directory on all
+			systems.
 
 :cd[!] {path}		Change the current directory to {path}.
 			If {path} is relative, it is searched for in the

runtime/doc/eval.txt

@@ -1,4 +1,4 @@
-*eval.txt*	For Vim version 8.2.  Last change: 2021 Oct 20
+*eval.txt*	For Vim version 8.2.  Last change: 2021 Dec 15
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -1865,15 +1865,15 @@ v:colornames    A dictionary that maps color names to hex color strings. These
 			\ 'mauve': '#915f6d,
 			\ }, 'keep')
 <
-		Using |extend| with the 'keep' option updates each color only
+		Using |extend()| with the 'keep' option updates each color only
 		if it did not exist in |v:colornames|. Doing so allows the
 		user to choose the precise color value for a common name
 		by setting it in their |.vimrc|.
 
 		It is possible to remove entries from this dictionary but
-		doing so is *NOT* recommended. Doing so is disruptive to
+		doing so is NOT recommended, because it is disruptive to
 		other scripts. It is also unlikely to achieve the desired
-		result because the |colorscheme| and |highlight| commands will
+		result because the |:colorscheme| and |:highlight| commands will
 		both automatically load all `colors/lists/default.vim` color
 		scripts.
 
@@ -2290,6 +2290,21 @@ v:shell_error	Result of the last shell command.  When non-zero, the last
 <		"shell_error" also works, for backwards compatibility, unless
 		|scriptversion| is 3 or higher.
 
+					*v:sizeofint* *sizeofint-variable*
+v:sizeofint	Number of bytes in an int.  Depends on how Vim was compiled.
+		This is only useful for deciding whether a test will give the
+		expected result.
+
+					*v:sizeoflong* *sizeoflong-variable*
+v:sizeoflong	Number of bytes in a long.  Depends on how Vim was compiled.
+		This is only useful for deciding whether a test will give the
+		expected result.
+
+				*v:sizeofpointer* *sizeofpointer-variable*
+v:sizeofpointer	Number of bytes in a pointer.  Depends on how Vim was compiled.
+		This is only useful for deciding whether a test will give the
+		expected result.
+
 					*v:statusmsg* *statusmsg-variable*
 v:statusmsg	Last given status message.  It's allowed to set this variable.
 
@@ -2613,7 +2628,8 @@ extendnew({expr1}, {expr2} [, {expr3}])
 feedkeys({string} [, {mode}])	Number	add key sequence to typeahead buffer
 filereadable({file})		Number	|TRUE| if {file} is a readable file
 filewritable({file})		Number	|TRUE| if {file} is a writable file
-filter({expr1}, {expr2})	List/Dict  remove items from {expr1} where
+filter({expr1}, {expr2})	List/Dict/Blob/String
+					remove items from {expr1} where
 					{expr2} is 0
 finddir({name} [, {path} [, {count}]])
 				String	find directory {name} in {path}
@@ -2718,6 +2734,8 @@ histget({history} [, {index}])	String	get the item {index} from a history
 histnr({history})		Number	highest index of a history
 hlID({name})			Number	syntax ID of highlight group {name}
 hlexists({name})		Number	|TRUE| if highlight group {name} exists
+hlget([{name} [, {resolve}]])	List	get highlight group attributes
+hlset({list})			Number	set highlight group attributes
 hostname()			String	name of the machine Vim is running on
 iconv({expr}, {from}, {to})	String	convert encoding of {expr}
 indent({lnum})			Number	indent of line {lnum}
@@ -2769,14 +2787,16 @@ localtime()			Number	current time
 log({expr})			Float	natural logarithm (base e) of {expr}
 log10({expr})			Float	logarithm of Float {expr} to base 10
 luaeval({expr} [, {expr}])	any	evaluate |Lua| expression
-map({expr1}, {expr2})		List/Dict  change each item in {expr1} to {expr}
+map({expr1}, {expr2})		List/Dict/Blob/String
+					change each item in {expr1} to {expr2}
 maparg({name} [, {mode} [, {abbr} [, {dict}]]])
 				String or Dict
 					rhs of mapping {name} in mode {mode}
 mapcheck({name} [, {mode} [, {abbr}]])
 				String	check for mappings matching {name}
-mapnew({expr1}, {expr2})	List/Dict  like |map()| but creates a new List
-					   or Dictionary
+mapnew({expr1}, {expr2})	List/Dict/Blob/String
+					like |map()| but creates a new List or
+					Dictionary
 mapset({mode}, {abbr}, {dict})	none	restore mapping from |maparg()| result
 match({expr}, {pat} [, {start} [, {count}]])
 				Number	position where {pat} matches in {expr}
@@ -4861,10 +4881,11 @@ filewritable({file})					*filewritable()*
 
 
 filter({expr1}, {expr2})				*filter()*
-		{expr1} must be a |List|, |Blob| or |Dictionary|.
+		{expr1} must be a |List|, |String|, |Blob| or |Dictionary|.
 		For each item in {expr1} evaluate {expr2} and when the result
-		is zero remove the item from the |List| or |Dictionary|. For a
-		|Blob| each byte is removed.
+		is zero or false remove the item from the |List| or
+		|Dictionary|.  Similarly for each byte in a |Blob| and each
+		charactor in a |String|.
 
 		{expr2} must be a |string| or |Funcref|.
 
@@ -4899,14 +4920,16 @@ filter({expr1}, {expr2})				*filter()*
 <		If you do not use "val" you can leave it out: >
 			call filter(myList, {idx -> idx % 2 == 1})
 <
-		The operation is done in-place.  If you want a |List| or
-		|Dictionary| to remain unmodified make a copy first: >
+		For a |List| and a |Dictionary| the operation is done
+		in-place.  If you want it to remain unmodified make a copy
+		first: >
 			:let l = filter(copy(mylist), 'v:val =~ "KEEP"')
 
-<		Returns {expr1}, the |List| , |Blob| or |Dictionary| that was
-		filtered.  When an error is encountered while evaluating
-		{expr2} no further items in {expr1} are processed.  When
-		{expr2} is a Funcref errors inside a function are ignored,
+<		Returns {expr1}, the |List| or |Dictionary| that was filtered,
+		or a new |Blob| or |String|. 
+		When an error is encountered while evaluating {expr2} no
+		further items in {expr1} are processed.
+		When {expr2} is a Funcref errors inside a function are ignored,
 		unless it was defined with the "abort" flag.
 
 		Can also be used as a |method|: >
@@ -4965,6 +4988,9 @@ flatten({list} [, {maxdepth}])					*flatten()*
 			:echo flatten([1, [2, [3, 4]], 5], 1)
 <			[1, 2, [3, 4], 5]
 
+		Can also be used as a |method|: >
+			mylist->flatten()
+<
 flattennew({list} [, {maxdepth}])			*flattennew()*
 		Like |flatten()| but first make a copy of {list}.
 
@@ -5642,7 +5668,7 @@ getcompletion({pat}, {type} [, {filtered}])		*getcompletion()*
 		buffer		buffer names
 		behave		:behave suboptions
 		color		color schemes
-		command		Ex command (and arguments)
+		command		Ex command
 		cmdline		|cmdline-completion| result
 		compiler	compilers
 		cscope		|:cscope| suboptions
@@ -5737,7 +5763,7 @@ getcursorcharpos([{winid}])
 <							*getcwd()*
 getcwd([{winnr} [, {tabnr}]])
 		The result is a String, which is the name of the current
-		working directory.
+		working directory.  'autochdir' is ignored.
 
 		With {winnr} return the local current directory of this window
 		in the current tab page.  {winnr} can be the window number or
@@ -5750,8 +5776,8 @@ getcwd([{winnr} [, {tabnr}]])
 		the working directory of the tabpage.
 		If {winnr} is zero use the current window, if {tabnr} is zero
 		use the current tabpage.
-		Without any arguments, return the working directory of the
-		current window.
+		Without any arguments, return the actual working directory of
+		the current window.
 		Return an empty string if the arguments are invalid.
 
 		Examples: >
@@ -5899,8 +5925,8 @@ getline({lnum} [, {end}])
 		digit, |line()| is called to translate the String into a Number.
 		To get the line under the cursor: >
 			getline(".")
-<		When {lnum} is smaller than 1 or bigger than the number of
-		lines in the buffer, an empty string is returned.
+<		When {lnum} is a number smaller than 1 or bigger than the
+		number of lines in the buffer, an empty string is returned.
 
 		When {end} is given the result is a |List| where each item is
 		a line from the current buffer in the range {lnum} to {end},
@@ -6362,6 +6388,9 @@ getwininfo([{winid}])					*getwininfo()*
 					otherwise
 			wincol		leftmost screen column of the window;
 					"col" from |win_screenpos()|
+			textoff		number of columns occupied by any
+					'foldcolumn', 'signcolumn' and line
+					number in front of the text
 			winid		|window-ID|
 			winnr		window number
 			winrow		topmost screen line of the window;
@@ -6716,6 +6745,108 @@ hlexists({name})					*hlexists()*
 
 		Can also be used as a |method|: >
 			GetName()->hlexists()
+<
+hlget([{name} [, {resolve}]])				*hlget()*
+		Returns a List of all the highlight group attributes.  If the
+		optional {name} is specified, then returns a List with only
+		the attributes of the specified highlight group.  Returns an
+		empty List if the highlight group {name} is not present.
+
+		If the optional {resolve} argument is set to v:true and the
+		highlight group {name} is linked to another group, then the
+		link is resolved recursively and the attributes of the
+		resolved highlight group are returned.
+
+		Each entry in the returned List is a Dictionary with the
+		following items:
+			cleared	boolean flag, set to v:true if the highlight
+				group attributes are cleared or not yet
+				specified.  See |highlight-clear|.
+			cterm	cterm attributes. See |highlight-cterm|.
+			ctermbg	cterm background color.
+				See |highlight-ctermbg|.
+			ctermfg	cterm foreground color.
+				See |highlight-ctermfg|.
+			ctermul	cterm underline color.  See |highlight-ctermul|.
+			default boolean flag, set to v:true if the highlight
+				group link is a default link. See
+				|highlight-default|.
+			font	highlight group font.  See |highlight-font|.
+			gui	gui attributes. See |highlight-gui|.
+			guibg	gui background color.  See |highlight-guibg|.
+			guifg	gui foreground color.  See |highlight-guifg|.
+			guisp	gui special color.  See |highlight-guisp|.
+			id	highlight group ID.
+			linksto	linked highlight group name.
+				See |:highlight-link|.
+			name	highlight group name. See |group-name|.
+			start	start terminal keycode.  See |highlight-start|.
+			stop	stop terminal keycode.  See |highlight-stop|.
+			term	term attributes.  See |highlight-term|.
+
+		The 'term', 'cterm' and 'gui' items in the above Dictionary
+		have a dictionary value with the following optional boolean
+		items: 'bold', 'standout', 'underline', 'undercurl', 'italic',
+		'reverse', 'inverse' and 'strikethrough'.
+
+		Example(s): >
+			:echo hlget()
+			:echo hlget('ModeMsg')
+			:echo hlget('Number', v:true)
+<
+		Can also be used as a |method|: >
+			GetName()->hlget()
+<
+hlset({list})						*hlset()*
+		Creates or modifies the attributes of a List of highlight
+		groups.  Each item in {list} is a dictionary containing the
+		attributes of a highlight group. See |hlget()| for the list of
+		supported items in this dictionary.
+
+		In addition to the items described in |hlget()|, the following
+		additional items are supported in the dictionary:
+
+			force		boolean flag to force the creation of
+					a link for an existing highlight group
+					with attributes.
+
+		The highlight group is identified using the 'name' item and
+		the 'id' item (if supplied) is ignored.  If a highlight group
+		with a specified name doesn't exist, then it is created.
+		Otherwise the attributes of an existing highlight group are
+		modified.
+
+		If an empty dictionary value is used for the 'term' or 'cterm'
+		or 'gui' entries, then the corresponding attributes are
+		cleared.  If the 'cleared' item is set to v:true, then all the
+		attributes of the highlight group are cleared.
+
+		The 'linksto' item can be used to link a highlight group to
+		another highlight group.  See |:highlight-link|.
+
+		Returns zero for success, -1 for failure.
+
+		Example(s): >
+			" add bold attribute to the Visual highlight group
+			:call hlset([#{name: 'Visual',
+					\ term: #{reverse: 1 , bold: 1}}])
+			:call hlset([#{name: 'Type', guifg: 'DarkGreen'}])
+			:let l = hlget()
+			:call hlset(l)
+			" clear the Search highlight group
+			:call hlset([#{name: 'Search', cleared: v:true}])
+			" clear the 'term' attributes for a highlight group
+			:call hlset([#{name: 'Title', term: {}}])
+			" create the MyHlg group linking it to DiffAdd
+			:call hlset([#{name: 'MyHlg', linksto: 'DiffAdd'}])
+			" remove the MyHlg group link
+			:call hlset([#{name: 'MyHlg', linksto: 'NONE'}])
+			" clear the attributes and a link
+			:call hlset([#{name: 'MyHlg', cleared: v:true,
+					\ linksto: 'NONE'}])
+<
+		Can also be used as a |method|: >
+			GetAttrList()->hlset()
 <
 							*hlID()*
 hlID({name})	The result is a Number, which is the ID of the highlight group
@@ -7441,16 +7572,19 @@ luaeval({expr} [, {expr}])					*luaeval()*
 <		{only available when compiled with the |+lua| feature}
 
 map({expr1}, {expr2})					*map()*
-		{expr1} must be a |List|, |Blob| or |Dictionary|.
-		Replace each item in {expr1} with the result of evaluating
-		{expr2}.  For a |Blob| each byte is replaced.
+		{expr1} must be a |List|, |String|, |Blob| or |Dictionary|.
+		When {expr1} is a |List|| or |Dictionary|, replace each
+		item in {expr1} with the result of evaluating {expr2}.
+		For a |Blob| each byte is replaced.
+		For a |String|, each character, including composing
+		characters, is replaced.
 		If the item type changes you may want to use |mapnew()| to
 		create a new List or Dictionary.  This is required when using
 		Vim9 script.
 
-		{expr2} must be a |string| or |Funcref|.
+		{expr2} must be a |String| or |Funcref|.
 
-		If {expr2} is a |string|, inside {expr2} |v:val| has the value
+		If {expr2} is a |String|, inside {expr2} |v:val| has the value
 		of the current item.  For a |Dictionary| |v:key| has the key
 		of the current item and for a |List| |v:key| has the index of
 		the current item.  For a |Blob| |v:key| has the index of the
@@ -7480,14 +7614,15 @@ map({expr1}, {expr2})					*map()*
 <		If you do not use "key" you can use a short name: >
 			call map(myDict, {_, val -> 'item: ' . val})
 <
-		The operation is done in-place.  If you want a |List| or
-		|Dictionary| to remain unmodified make a copy first: >
+		The operation is done in-place for a |List| and |Dictionary|.
+		If you want it to remain unmodified make a copy first: >
 			:let tlist = map(copy(mylist), ' v:val . "\t"')
 
-<		Returns {expr1}, the |List|, |Blob| or |Dictionary| that was
-		filtered.  When an error is encountered while evaluating
-		{expr2} no further items in {expr1} are processed.  When
-		{expr2} is a Funcref errors inside a function are ignored,
+<		Returns {expr1}, the |List| or |Dictionary| that was filtered,
+		or a new |Blob| or |String|.
+		When an error is encountered while evaluating {expr2} no
+		further items in {expr1} are processed.
+		When {expr2} is a Funcref errors inside a function are ignored,
 		unless it was defined with the "abort" flag.
 
 		Can also be used as a |method|: >
@@ -7683,6 +7818,7 @@ match({expr}, {pat} [, {start} [, {count}]])			*match()*
 		further down in the text.
 
 		Can also be used as a |method|: >
+			GetText()->match('word')
 			GetList()->match('word')
 <
 				*matchadd()* *E798* *E799* *E801* *E957*
@@ -7919,8 +8055,10 @@ matchlist({expr}, {pat} [, {start} [, {count}]])		*matchlist()*
 <		Results in: ['acd', 'a', '', 'c', 'd', '', '', '', '', '']
 		When there is no match an empty list is returned.
 
+		You can pass in a List, but that is not very useful.
+
 		Can also be used as a |method|: >
-			GetList()->matchlist('word')
+			GetText()->matchlist('word')
 
 matchstr({expr}, {pat} [, {start} [, {count}]])			*matchstr()*
 		Same as |match()|, but return the matched string.  Example: >
@@ -8361,15 +8499,18 @@ printf({fmt}, {expr1} ...)				*printf()*
 			field width.  If the converted value has fewer bytes
 			than the field width, it will be padded with spaces on
 			the left (or right, if the left-adjustment flag has
-			been given) to fill out the field width.
+			been given) to fill out the field width.  For the S
+			conversion the count is in cells.
 
 		.precision
 			An optional precision, in the form of a period '.'
 			followed by an optional digit string.  If the digit
 			string is omitted, the precision is taken as zero.
 			This gives the minimum number of digits to appear for
-			d, o, x, and X conversions, or the maximum number of
-			bytes to be printed from a string for s conversions.
+			d, o, x, and X conversions, the maximum number of
+			bytes to be printed from a string for s conversions,
+			or the maximum number of cells to be printed from a
+			string for S conversions.
 			For floating point it is the number of digits after
 			the decimal point.
 
@@ -9454,7 +9595,9 @@ searchcount([{options}])					*searchcount()*
 						|getpos()|
 						(default: cursor's position)
 
-
+		Can also be used as a |method|: >
+			GetSearchOpts()->searchcount()
+<
 searchdecl({name} [, {global} [, {thisblock}]])			*searchdecl()*
 		Search for the declaration of {name}.
 
@@ -9637,6 +9780,7 @@ setbufline({buf}, {lnum}, {text})			*setbufline()*
 		For the use of {buf}, see |bufname()| above.
 
 		{lnum} is used like with |setline()|.
+		Use "$" to refer to the last line in buffer {buf}.
 		When {lnum} is just below the last line the {text} will be
 		added below the last line.
 
@@ -10118,7 +10262,7 @@ settabwinvar({tabnr}, {winnr}, {varname}, {val})	*settabwinvar()*
 
 		Can also be used as a |method|, the base is passed as the
 		fourth argument: >
-			GetValue()->settabvar(tab, winnr, name)
+			GetValue()->settabwinvar(tab, winnr, name)
 
 settagstack({nr}, {dict} [, {action}])			*settagstack()*
 		Modify the tag stack of the window {nr} using {dict}.
@@ -10375,6 +10519,10 @@ sort({list} [, {func} [, {dict}]])			*sort()* *E702*
 <
 sound_clear()						*sound_clear()*
 		Stop playing all sounds.
+
+		On some Linux systems you may need the libcanberra-pulse
+		package, otherwise sound may not stop.
+
 		{only available when compiled with the |+sound| feature}
 
 							*sound_playevent()*
@@ -10427,6 +10575,9 @@ sound_stop({id})					*sound_stop()*
 		Stop playing sound {id}.  {id} must be previously returned by
 		`sound_playevent()` or `sound_playfile()`.
 
+		On some Linux systems you may need the libcanberra-pulse
+		package, otherwise sound may not stop.
+
 		On MS-Windows, this does not work for event sound started by
 		`sound_playevent()`. To stop event sounds, use `sound_clear()`.
 
@@ -10866,10 +11017,12 @@ strptime({format}, {timestring})				*strptime()*
 		  :echo strftime("%c", strptime("%Y%m%d%H%M%S", "19970427115355") + 3600)
 <		  Sun Apr 27 12:53:55 1997
 
+		Can also be used as a |method|: >
+			GetFormat()->strptime(timestring)
+<
 		Not available on all systems.  To check use: >
 			:if exists("*strptime")
 
-
 strridx({haystack}, {needle} [, {start}])			*strridx()*
 		The result is a Number, which gives the byte index in
 		{haystack} of the last occurrence of the String {needle}.
@@ -11138,10 +11291,10 @@ synstack({lnum}, {col})					*synstack()*
 		valid positions.
 
 system({expr} [, {input}])				*system()* *E677*
-		Get the output of the shell command {expr} as a string.  See
+		Get the output of the shell command {expr} as a |String|.  See
 		|systemlist()| to get the output as a |List|.
 
-		When {input} is given and is a string this string is written
+		When {input} is given and is a |String| this string is written
 		to a file and passed as stdin to the command.  The string is
 		written as-is, you need to take care of using the correct line
 		separators yourself.
@@ -11764,9 +11917,9 @@ wildmenumode()					*wildmenumode()*
 win_execute({id}, {command} [, {silent}])		*win_execute()*
 		Like `execute()` but in the context of window {id}.
 		The window will temporarily be made the current window,
-		without triggering autocommands.  When executing {command}
-		autocommands will be triggered, this may have unexpected side
-		effects.  Use |:noautocmd| if needed.
+		without triggering autocommands or changing directory.  When
+		executing {command} autocommands will be triggered, this may
+		have unexpected side effects.  Use |:noautocmd| if needed.
 		Example: >
 			call win_execute(winid, 'set syntax=python')
 <		Doing the same with `setwinvar()` would not trigger
@@ -11821,7 +11974,9 @@ win_gettype([{nr}])					*win_gettype()*
 		popup window then 'buftype' is "terminal" and win_gettype()
 		returns "popup".
 
-
+		Can also be used as a |method|: >
+			GetWinid()->win_gettype()
+<
 win_gotoid({expr})					*win_gotoid()*
 		Go to window with ID {expr}.  This may also change the current
 		tabpage.

runtime/doc/filetype.txt

@@ -139,18 +139,19 @@ can be used to overrule the filetype used for certain extensions:
 
 	file name	variable ~
 	*.asa		g:filetype_asa	|ft-aspvbs-syntax| |ft-aspperl-syntax|
-	*.asp		g:filetype_asp	|ft-aspvbs-syntax| |ft-aspperl-syntax|
 	*.asm		g:asmsyntax	|ft-asm-syntax|
-	*.prg		g:filetype_prg
-	*.pl		g:filetype_pl
-	*.inc		g:filetype_inc
-	*.w		g:filetype_w	|ft-cweb-syntax|
+	*.asp		g:filetype_asp	|ft-aspvbs-syntax| |ft-aspperl-syntax|
+	*.fs		g:filetype_fs   |ft-forth-syntax|
 	*.i		g:filetype_i	|ft-progress-syntax|
+	*.inc		g:filetype_inc
 	*.m		g:filetype_m	|ft-mathematica-syntax|
 	*.p		g:filetype_p	|ft-pascal-syntax|
+	*.pl		g:filetype_pl
 	*.pp		g:filetype_pp	|ft-pascal-syntax|
+	*.prg		g:filetype_prg
 	*.sh		g:bash_is_sh	|ft-sh-syntax|
 	*.tex		g:tex_flavor	|ft-tex-plugin|
+	*.w		g:filetype_w	|ft-cweb-syntax|
 
 							*filetype-ignore*
 To avoid that certain files are being inspected, the g:ft_ignore_pat variable

runtime/doc/gui_w32.txt

@@ -1,4 +1,4 @@
-*gui_w32.txt*   For Vim version 8.2.  Last change: 2021 Apr 05
+*gui_w32.txt*   For Vim version 8.2.  Last change: 2021 Oct 24
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/helphelp.txt

@@ -1,4 +1,4 @@
-*helphelp.txt*	For Vim version 8.2.  Last change: 2020 Dec 29
+*helphelp.txt*	For Vim version 8.2.  Last change: 2021 Dec 13
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -163,7 +163,7 @@ If you would like to open the help in the current window, see this tip:
 
 The initial height of the help window can be set with the 'helpheight' option
 (default 20).
-
+						*help-buffer-options*
 When the help buffer is created, several local options are set to make sure
 the help text is displayed as it was intended:
     'iskeyword'		nearly all ASCII chars except ' ', '*', '"' and '|'
@@ -323,21 +323,25 @@ Hints for translators:
 3. Writing help files					*help-writing*
 
 For ease of use, a Vim help file for a plugin should follow the format of the
-standard Vim help files.  If you are writing a new help file it's best to copy
-one of the existing files and use it as a template.
+standard Vim help files, except for the first line.  If you are writing a new
+help file it's best to copy one of the existing files and use it as a
+template.
 
 The first line in a help file should have the following format:
 
-*helpfile_name.txt*	For Vim version 7.3	Last change: 2010 June 4
+*plugin_name.txt*	{short description of the plugin}
 
-The first field is a link to the help file name.  The second field describes
-the applicable Vim version.  The last field specifies the last modification
-date of the file.  Each field is separated by a tab.
+The first field is a help tag where ":help plugin_name" will jump to.  The
+remainder of the line, after a Tab, describes the plugin purpose in a short
+way.  This will show up in the "LOCAL ADDITIONS" section of the main help
+file.  Check there that it shows up properly: |local-additions|.
+
+If you want to add a version number or last modification date, put it in the
+second line, right aligned.
 
 At the bottom of the help file, place a Vim modeline to set the 'textwidth'
 and 'tabstop' options and the 'filetype' to "help".  Never set a global option
-in such a modeline, that can have consequences undesired by whoever reads that
-help.
+in such a modeline, that can have undesired consequences.
 
 
 TAGS

runtime/doc/if_pyth.txt

@@ -1,4 +1,4 @@
-*if_pyth.txt*   For Vim version 8.2.  Last change: 2019 Dec 07
+*if_pyth.txt*   For Vim version 8.2.  Last change: 2021 Nov 12
 
 
 		  VIM REFERENCE MANUAL    by Paul Moore
@@ -63,6 +63,11 @@ To see what version of Python you have: >
 
 There is no need to import sys, it's done by default.
 
+							*python-environment*
+Environment variables set in Vim are not always available in Python.  This
+depends on how Vim and Python were build.  Also see
+https://docs.python.org/3/library/os.html#os.environ
+
 Note: Python is very sensitive to the indenting.  Make sure the "class" line
 and "EOF" do not have any indent.
 

runtime/doc/indent.txt

@@ -608,26 +608,25 @@ CLOJURE					*ft-clojure-indent* *clojure-indent*
 Clojure indentation differs somewhat from traditional Lisps, due in part to
 the use of square and curly brackets, and otherwise by community convention.
 These conventions are not universally followed, so the Clojure indent script
-offers a few configurable options, listed below.
+offers a few configuration options.
+
+(If the current Vim does not include |searchpairpos()|, the indent script falls
+back to normal 'lisp' indenting, and the following options are ignored.)
 
-If the current vim does not include searchpairpos(), the indent script falls
-back to normal 'lisp' indenting, and the following options are ignored.
 
 							*g:clojure_maxlines*
 
-Set maximum scan distance of searchpairpos(). Larger values trade performance
-for correctness when dealing with very long forms. A value of 0 will scan
-without limits.
->
-	" Default
-	let g:clojure_maxlines = 100
-<
+Sets maximum scan distance of `searchpairpos()`.  Larger values trade
+performance for correctness when dealing with very long forms.  A value of
+0 will scan without limits.  The default is 300.
+
+
 						*g:clojure_fuzzy_indent*
 					*g:clojure_fuzzy_indent_patterns*
 					*g:clojure_fuzzy_indent_blacklist*
 
 The 'lispwords' option is a list of comma-separated words that mark special
-forms whose subforms must be indented with two spaces.
+forms whose subforms should be indented with two spaces.
 
 For example:
 >
@@ -645,15 +644,11 @@ the fuzzy indent feature:
 	let g:clojure_fuzzy_indent_patterns = ['^with', '^def', '^let']
 	let g:clojure_fuzzy_indent_blacklist =
 		\ ['-fn$', '\v^with-%(meta|out-str|loading-context)$']
-
-	" Legacy comma-delimited string version; the list format above is
-	" recommended. Note that patterns are implicitly anchored with ^ and $
-	let g:clojure_fuzzy_indent_patterns = 'with.*,def.*,let.*'
 <
 |g:clojure_fuzzy_indent_patterns| and |g:clojure_fuzzy_indent_blacklist| are
-|Lists| of patterns that will be matched against the unquoted, unqualified
-symbol at the head of a list. This means that a pattern like "^foo" will match
-all these candidates: "foobar", "my.ns/foobar", and "#'foobar".
+lists of patterns that will be matched against the unqualified symbol at the
+head of a list.  This means that a pattern like `"^foo"` will match all these
+candidates: `foobar`, `my.ns/foobar`, and `#'foobar`.
 
 Each candidate word is tested for special treatment in this order:
 
@@ -664,20 +659,22 @@ Each candidate word is tested for special treatment in this order:
 	   |g:clojure_fuzzy_indent_patterns|
 	4. Return false and indent normally otherwise
 
+
 					*g:clojure_special_indent_words*
 
-Some forms in Clojure are indented so that every subform is indented only two
-spaces, regardless of 'lispwords'. If you have a custom construct that should
-be indented in this idiosyncratic fashion, you can add your symbols to the
-default list below.
+Some forms in Clojure are indented such that every subform is indented by only
+two spaces, regardless of 'lispwords'.  If you have a custom construct that
+should be indented in this idiosyncratic fashion, you can add your symbols to
+the default list below.
 >
 	" Default
 	let g:clojure_special_indent_words =
 	   \ 'deftype,defrecord,reify,proxy,extend-type,extend-protocol,letfn'
 <
+
 					*g:clojure_align_multiline_strings*
 
-Align subsequent lines in multiline strings to the column after the opening
+Align subsequent lines in multi-line strings to the column after the opening
 quote, instead of the same column.
 
 For example:
@@ -694,11 +691,7 @@ For example:
 	   enim ad minim veniam, quis nostrud exercitation ullamco laboris
 	   nisi ut aliquip ex ea commodo consequat.")
 <
-This option is off by default.
->
-	" Default
-	let g:clojure_align_multiline_strings = 0
-<
+
 						*g:clojure_align_subforms*
 
 By default, parenthesized compound forms that look like function calls and
@@ -709,18 +702,14 @@ two spaces relative to the opening paren:
 	  bar
 	  baz)
 <
-Setting this option changes this behavior so that all subforms are aligned to
-the same column, emulating the default behavior of clojure-mode.el:
+Setting this option to `1` changes this behaviour so that all subforms are
+aligned to the same column, emulating the default behaviour of
+clojure-mode.el:
 >
 	(foo
 	 bar
 	 baz)
 <
-This option is off by default.
->
-	" Default
-	let g:clojure_align_subforms = 0
-<
 
 FORTRAN							*ft-fortran-indent*
 

runtime/doc/insert.txt

@@ -1,4 +1,4 @@
-*insert.txt*    For Vim version 8.2.  Last change: 2021 Oct 18
+*insert.txt*    For Vim version 8.2.  Last change: 2021 Oct 24
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -871,31 +871,27 @@ invoked and what it should return.
 Here is an example that uses the "aiksaurus" command (provided by Magnus
 Groß): >
 
-	func Thesaur(findstart, base)
-	    if a:findstart
-		let line = getline('.')
-		let start = col('.') - 1
-		while start > 0 && line[start - 1] =~ '\a'
-		   let start -= 1
-		endwhile
-		return start
-	    else
-		let res = []
-		let h = ''
-		for l in split(system('aiksaurus '.shellescape(a:base)), '\n')
-		    if l[:3] == '=== '
-		    	let h = substitute(l[4:], ' =*$', '', '')
-		    elseif l[0] =~ '\a'
-			call extend(res, map(split(l, ', '), {_, val -> {'word': val, 'menu': '('.h.')'}}))
-		    endif
-		endfor
-		return res
-	    endif
-	endfunc
-
-	if exists('+thesaurusfunc')
-	    set thesaurusfunc=Thesaur
+    func Thesaur(findstart, base)
+      if a:findstart
+    	return searchpos('\<', 'bnW', line('.'))[1] - 1
+      endif
+      let res = []
+      let h = ''
+      for l in systemlist('aiksaurus '.shellescape(a:base))
+	if l[:3] == '=== '
+	  let h = '('.substitute(l[4:], ' =*$', ')', '')
+	elseif l ==# 'Alphabetically similar known words are: '
+	  let h = "\U0001f52e"
+	elseif l[0] =~ '\a' || (h ==# "\U0001f52e" && l[0] ==# "\t")
+	  call extend(res, map(split(substitute(l, '^\t', '', ''), ', '), {_, val -> {'word': val, 'menu': h}}))
 	endif
+      endfor
+      return res
+    endfunc
+    
+    if exists('+thesaurusfunc')
+      set thesaurusfunc=Thesaur
+    endif
 
 
 Completing keywords in the current and included files	*compl-keyword*

runtime/doc/map.txt

@@ -1,4 +1,4 @@
-*map.txt*       For Vim version 8.2.  Last change: 2021 Oct 19
+*map.txt*       For Vim version 8.2.  Last change: 2021 Dec 15
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -61,6 +61,8 @@ modes.
 			where the map command applies.  The result, including
 			{rhs}, is then further scanned for mappings.  This
 			allows for nested and recursive use of mappings.
+			Note: Trailing spaces are included in the {rhs},
+			because space is a valid Normal mode command.
 
 						*:nore* *:norem*
 :no[remap]  {lhs} {rhs}		|mapmode-nvo|	*:no*  *:noremap* *:nor*
@@ -94,6 +96,9 @@ modes.
 			Remove the mapping of {lhs} for the modes where the
 			map command applies.  The mapping may remain defined
 			for other modes where it applies.
+			It also works when {lhs} matches the {rhs} of a
+			mapping. This is for when when an abbreviation
+			applied.
 			Note: Trailing spaces are included in the {lhs}.  This
 			unmap does NOT work: >
 				:map @@ foo
@@ -168,7 +173,7 @@ type "a", then "bar" will get inserted.
 "<unique>" can be used in any order.  They must appear right after the
 command, before any other arguments.
 
-				*:map-local* *:map-<buffer>* *E224* *E225*
+			*:map-local* *:map-<buffer>* *:map-buffer* *E224* *E225*
 If the first argument to one of these commands is "<buffer>" the mapping will
 be effective in the current buffer only.  Example: >
 	:map <buffer>  ,w  /[.,;]<CR>
@@ -227,7 +232,7 @@ Note: ":map <script>" and ":noremap <script>" do the same thing.  The
 "<script>" overrules the command name.  Using ":noremap <script>" is
 preferred, because it's clearer that remapping is (mostly) disabled.
 
-						*:map-<unique>* *E226* *E227*
+				*:map-<unique>* *:map-unique* *E226* *E227*
 If the first argument to one of these commands is "<unique>" and it is used to
 define a new mapping or abbreviation, the command will fail if the mapping or
 abbreviation already exists.  Example: >
@@ -344,6 +349,8 @@ Note:
 - For the same reason, |keycodes| like <C-R><C-W> are interpreted as plain,
   unmapped keys.
 - The command is not echo'ed, no need for <silent>.
+- The {rhs} is not subject to abbreviations nor to other mappings, even if the
+  mapping is recursive.
 - In Visual mode  you can use `line('v')` and `col('v')` to get one end of the
   Visual area, the cursor is at the other end.
 - In Select mode, |:map| and |:vmap| command mappings are executed in
@@ -967,28 +974,35 @@ Here is an example that counts the number of spaces with <F4>: >
 	" doubling <F4> works on a line
 	nnoremap <expr> <F4><F4> CountSpaces() .. '_'
 
-	function CountSpaces(type = '') abort
+	function CountSpaces(virtualedit = '', irregular_block = v:false, type = '') abort
 	  if a:type == ''
-	    set opfunc=CountSpaces
+	    let &operatorfunc = function('CountSpaces', [&virtualedit, v:false])
+	    set virtualedit=block
 	    return 'g@'
- 	  endif
+	  endif
 
+	  let cb_save = &clipboard
 	  let sel_save = &selection
 	  let reg_save = getreginfo('"')
-	  let cb_save = &clipboard
 	  let visual_marks_save = [getpos("'<"), getpos("'>")]
 
 	  try
-	    set clipboard= selection=inclusive
-	    let commands = #{line: "'[V']y", char: "`[v`]y", block: "`[\<c-v>`]y"}
-	    silent exe 'noautocmd keepjumps normal! ' .. get(commands, a:type, '')
-	    echom getreg('"')->count(' ')
+	    set clipboard= selection=inclusive virtualedit=
+	    let commands = #{line: "'[V']", char: "`[v`]", block: "`[\<C-V>`]"}->get(a:type, 'v')
+	    if getpos("']")[-1] != 0 || a:irregular_block
+	      let commands ..= 'oO$'
+	      let &operatorfunc = function('CountSpaces', [a:virtualedit, v:true])
+	    endif
+	    let commands ..= 'y'
+	    execute 'silent noautocmd keepjumps normal! ' .. commands
+	    echomsg getreg('"')->count(' ')
 	  finally
 	    call setreg('"', reg_save)
 	    call setpos("'<", visual_marks_save[0])
 	    call setpos("'>", visual_marks_save[1])
 	    let &clipboard = cb_save
 	    let &selection = sel_save
+	    let &virtualedit = a:virtualedit
 	  endtry
 	endfunction
 
@@ -1007,6 +1021,17 @@ or `unnamedplus`.
 The `mode()` function will return the state as it will be after applying the
 operator.
 
+Here is an example for using a lambda function to create a normal-mode
+operator to add quotes around text in the current line: >
+
+	nnoremap <F4> <Cmd>let &opfunc='{t ->
+				\ getline(".")
+				\ ->split("\\zs")
+				\ ->insert("\"", col("'']"))
+				\ ->insert("\"", col("''[") - 1)
+				\ ->join("")
+				\ ->setline(".")}'<CR>g@
+
 ==============================================================================
 2. Abbreviations			*abbreviations* *Abbreviations*
 
@@ -1560,6 +1585,7 @@ Possible values are (second column is the short name used in listing):
 Special cases ~
 					*:command-bang* *:command-bar*
 					*:command-register* *:command-buffer*
+					*:command-keepscript*
 There are some special cases as well:
 
 	-bang	    The command can take a ! modifier (like :q or :w)
@@ -1569,6 +1595,9 @@ There are some special cases as well:
 	-register   The first argument to the command can be an optional
 		    register name (like :del, :put, :yank).
 	-buffer	    The command will only be available in the current buffer.
+	-keepscript Do not use the location of where the user command was
+		    defined for verbose messages, use the location of where
+		    the user command was invoked.
 
 In the cases of the -count and -register attributes, if the optional argument
 is supplied, it is removed from the argument list and is available to the

runtime/doc/message.txt

@@ -1,4 +1,4 @@
-*message.txt*   For Vim version 8.2.  Last change: 2021 Jul 31
+*message.txt*   For Vim version 8.2.  Last change: 2021 Dec 13
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -29,8 +29,7 @@ depends on the 'shortmess' option.
 				Clear messages, keeping only the {count} most
 				recent ones.
 
-The number of remembered messages is fixed at 20 for the tiny version and 200
-for other versions.
+The number of remembered messages is fixed at 200.
 
 								*g<*
 The "g<" command can be used to see the last page of previous command output.

runtime/doc/motion.txt

@@ -1,4 +1,4 @@
-*motion.txt*    For Vim version 8.2.  Last change: 2021 Jun 13
+*motion.txt*    For Vim version 8.2.  Last change: 2021 Dec 13
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -386,6 +386,8 @@ w			[count] words forward.  |exclusive| motion.
 
 <C-Right>	or					*<C-Right>* *W*
 W			[count] WORDS forward.  |exclusive| motion.
+			If <C-Right> does not work, check out
+			|arrow_modifiers|.
 
 							*e*
 e			Forward to the end of word [count] |inclusive|.
@@ -400,6 +402,8 @@ b			[count] words backward.  |exclusive| motion.
 
 <C-Left>	or					*<C-Left>* *B*
 B			[count] WORDS backward.  |exclusive| motion.
+			If <C-Left> does not work, check out
+			|arrow_modifiers|.
 
 							*ge*
 ge			Backward to the end of word [count] |inclusive|.
@@ -1034,12 +1038,10 @@ commands that start editing a new file.
 							*CTRL-O*
 CTRL-O			Go to [count] Older cursor position in jump list
 			(not a motion command).
-			{not available without the |+jumplist| feature}
 
 <Tab>		or					*CTRL-I* *<Tab>*
 CTRL-I			Go to [count] newer cursor position in jump list
 			(not a motion command).
-			{not available without the |+jumplist| feature}
 
 			NOTE: In the GUI and in a terminal supporting
 			|modifyOtherKeys|, CTRL-I can be mapped separately
@@ -1049,18 +1051,15 @@ CTRL-I			Go to [count] newer cursor position in jump list
 
 							*:ju* *:jumps*
 :ju[mps]		Print the jump list (not a motion command).
-			{not available without the |+jumplist| feature}
 
 							*:cle* *:clearjumps*
 :cle[arjumps]		Clear the jump list of the current window.
-			{not available without the |+jumplist| feature}
 
 							*jumplist*
 Jumps are remembered in a jump list.  With the CTRL-O and CTRL-I command you
 can go to cursor positions before older jumps, and back again.  Thus you can
 move up and down the list.  There is a separate jump list for each window.
 The maximum number of entries is fixed at 100.
-{not available without the |+jumplist| feature}
 
 For example, after three jump commands you have this jump list:
 
@@ -1137,13 +1136,11 @@ g;			Go to [count] older position in change list.
 			positions go to the oldest change.
 			If there is no older change an error message is given.
 			(not a motion command)
-			{not available without the |+jumplist| feature}
 
 							*g,* *E663*
 g,			Go to [count] newer cursor position in change list.
 			Just like |g;| but in the opposite direction.
 			(not a motion command)
-			{not available without the |+jumplist| feature}
 
 When using a count you jump as far back or forward as possible.  Thus you can
 use "999g;" to go to the first change for which the position is still

runtime/doc/options.txt

@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 8.2.  Last change: 2021 Oct 20
+*options.txt*	For Vim version 8.2.  Last change: 2021 Dec 11
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -35,6 +35,8 @@ achieve special effects.  These options come in three forms:
 			internally and can't be changed.  Changing the terminal
 			codes in the GUI is not useful either...
 
+:se[t]! termcap		Idem, but don't use multiple columns.
+
 								*E518* *E519*
 :se[t] {option}?	Show value of {option}.
 
@@ -371,6 +373,30 @@ Note: In the future more global options can be made global-local.  Using
 ":setlocal" on a global option might work differently then.
 
 
+						*option-value-function*
+Some options ('completefunc', 'imactivatefunc', 'imstatusfunc', 'omnifunc',
+'operatorfunc', 'quickfixtextfunc', 'tagfunc' and 'thesaurusfunc') are set to
+a function name or a function reference or a lambda function.  When using a
+lambda it will be converted to the name, e.g. "<lambda>123".  Examples:
+>
+	set opfunc=MyOpFunc
+	set opfunc=function('MyOpFunc')
+	set opfunc=funcref('MyOpFunc')
+	set opfunc={a\ ->\ MyOpFunc(a)}
+	" set using a funcref variable
+	let Fn = function('MyTagFunc')
+	let &tagfunc = string(Fn)
+	" set using a lambda expression
+	let &tagfunc = {t -> MyTagFunc(t)}
+	" set using a variable with lambda expression
+	let L = {a, b, c -> MyTagFunc(a, b , c)}
+	let &tagfunc = L
+
+In Vim9 script, in a compiled function, you can use a lambda, but a
+closured does not work, because the function will be called without the
+context of where it was defined.
+
+
 Setting the filetype
 
 :setf[iletype] [FALLBACK] {filetype}			*:setf* *:setfiletype*
@@ -850,9 +876,12 @@ A jump table for the options with a short description can be found at |Q_op|.
 'autowrite' 'aw'	boolean	(default off)
 			global
 	Write the contents of the file, if it has been modified, on each
-	:next, :rewind, :last, :first, :previous, :stop, :suspend, :tag, :!,
-	:make, CTRL-] and CTRL-^ command; and when a :buffer, CTRL-O, CTRL-I,
-	'{A-Z0-9}, or `{A-Z0-9} command takes one to another file.
+	`:next`, `:rewind`, `:last`, `:first`, `:previous`, `:stop`,
+	`:suspend`, `:tag, `:!`, ``:make`, CTRL-] and CTRL-^ command; and when
+	a :buffer, CTRL-O, CTRL-I, '{A-Z0-9}, or `{A-Z0-9} command takes one
+	to another file.
+	A buffer is not written if it becomes hidden, e.g. when 'bufhidden' is
+	set to "hide" and `:next` is used
 	Note that for some commands the 'autowrite' option is not used, see
 	'autowriteall' for that.
 	Some buffers will not be written, specifically when 'buftype' is
@@ -1420,6 +1449,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Also see |win_gettype()|, which returns the type of the window.
 
 	Be careful with changing this option, it can have many side effects!
+	One such effect is that Vim will not check the timestamp of the file,
+	if the file is changed by another program this will not be noticed.
 
 	A "quickfix" buffer is only used for the error list and the location
 	list.  This value is set by the |:cwindow| and |:lwindow| commands and
@@ -1462,6 +1493,15 @@ A jump table for the options with a short description can be found at |Q_op|.
 			case mapping, the current locale is not effective.
 			This probably only matters for Turkish.
 
+						*'cdhome'* *'cdh'*
+'cdhome' 'cdh'		boolean	(default: off)
+			global
+	When on, |:cd|, |:tcd| and |:lcd| without an argument changes the
+	current working directory to the |$HOME| directory like in Unix.
+	When off, those commands just print the current directory name.
+	On Unix this option has no effect.
+	NOTE: This option is reset when 'compatible' is set.
+
 						*'cdpath'* *'cd'* *E344* *E346*
 'cdpath' 'cd'		string	(default: equivalent to $CDPATH or ",,")
 			global
@@ -1803,6 +1843,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	'balloonexpr'	+ ""		text to show in evaluation balloon
 	'breakindent'	+ off		don't indent when wrapping lines
 	'cedit'		- {unchanged}	{set vim default only on resetting 'cp'}
+	'cdhome'	+ off		":cd" don't chdir to home on non-Unix
 	'cindent'	+ off		no C code indentation
 	'compatible'	- {unchanged}	{set vim default only on resetting 'cp'}
 	'copyindent'	+ off		don't copy indent structure
@@ -1918,7 +1959,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	This option specifies a function to be used for Insert mode completion
 	with CTRL-X CTRL-U. |i_CTRL-X_CTRL-U|
 	See |complete-functions| for an explanation of how the function is
-	invoked and what it should return.
+	invoked and what it should return.  The value can be the name of a
+	function, a |lambda| or a |Funcref|. See |option-value-function| for
+	more information.
 	This option cannot be set from a |modeline| or in the |sandbox|, for
 	security reasons.
 
@@ -4177,8 +4220,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 						*'icon'* *'noicon'*
 'icon'			boolean	(default off, on when title can be restored)
 			global
-			{not available when compiled without the |+title|
-			feature}
 	When on, the icon text of the window will be set to the value of
 	'iconstring' (if it is not empty), or to the name of the file
 	currently being edited.  Only the last part of the name is used.
@@ -4195,8 +4236,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 						*'iconstring'*
 'iconstring'		string	(default "")
 			global
-			{not available when compiled without the |+title|
-			feature}
 	When this option is not empty, it will be used for the icon text of
 	the window.  This happens only when the 'icon' option is on.
 	Only works if the terminal supports setting window icon text
@@ -4223,7 +4262,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 'imactivatefunc' 'imaf'	string (default "")
 			global
 	This option specifies a function that will be called to
-	activate or deactivate the Input Method.
+	activate or deactivate the Input Method.  The value can be the name of
+	a function, a |lambda| or a |Funcref|. See |option-value-function| for
+	more information.
 	It is not used in the MS-Windows GUI version.
 	The expression will be evaluated in the |sandbox| when set from a
 	modeline, see |sandbox-option|.
@@ -4333,6 +4374,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 			global
 	This option specifies a function that is called to obtain the status
 	of Input Method.  It must return a positive number when IME is active.
+	The value can be the name of a function, a |lambda| or a |Funcref|.
+	See |option-value-function| for more information.
 	It is not used in the MS-Windows GUI version.
 
 	Example: >
@@ -4906,9 +4949,10 @@ A jump table for the options with a short description can be found at |Q_op|.
 						*'list'* *'nolist'*
 'list'			boolean	(default off)
 			local to window
-	List mode: Show tabs as CTRL-I is displayed, display $ after end of
-	line.  Useful to see the difference between tabs and spaces and for
-	trailing blanks.  Further changed by the 'listchars' option.
+	List mode: By default show tabs as CTRL-I is displayed, display $
+	after end of line.  Useful to see the difference between tabs and
+	spaces and for trailing blanks.  Further changed by the 'listchars'
+	option.
 
 	The cursor is displayed at the start of the space a Tab character
 	occupies, not at the end as usual in Normal mode.  To get this cursor
@@ -5598,7 +5642,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	This option specifies a function to be used for Insert mode omni
 	completion with CTRL-X CTRL-O. |i_CTRL-X_CTRL-O|
 	See |complete-functions| for an explanation of how the function is
-	invoked and what it should return.
+	invoked and what it should return.  The value can be the name of a
+	function, a |lambda| or a |Funcref|. See |option-value-function| for
+	more information.
 	This option is usually set by a filetype plugin:
 	|:filetype-plugin-on|
 	This option cannot be set from a |modeline| or in the |sandbox|, for
@@ -5620,7 +5666,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 'operatorfunc' 'opfunc'	string	(default: empty)
 			global
 	This option specifies a function to be called by the |g@| operator.
-	See |:map-operator| for more info and an example.
+	See |:map-operator| for more info and an example.  The value can be
+	the name of a function, a |lambda| or a |Funcref|. See
+	|option-value-function| for more information.
 
 	This option cannot be set from a |modeline| or in the |sandbox|, for
 	security reasons.
@@ -6020,8 +6068,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	customize the information displayed in the quickfix or location window
 	for each entry in the corresponding quickfix or location list.  See
 	|quickfix-window-function| for an explanation of how to write the
-	function and an example. The value can be the name of a function or a
-	lambda.
+	function and an example.  The value can be the name of a function, a
+	|lambda| or a |Funcref|. See |option-value-function| for more
+	information.
 
 	This option cannot be set from a |modeline| or in the |sandbox|, for
 	security reasons.
@@ -7775,7 +7824,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	This option specifies a function to be used to perform tag searches.
 	The function gets the tag pattern and should return a List of matching
 	tags.  See |tag-function| for an explanation of how to write the
-	function and an example.
+	function and an example.  The value can be the name of a function, a
+	|lambda| or a |Funcref|. See |option-value-function| for more
+	information.
 
 						*'taglength'* *'tl'*
 'taglength' 'tl'	number	(default 0)
@@ -7938,6 +7989,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Number of scrollback lines to keep.  When going over this limit the
 	first 10% of the scrollback lines are deleted.  This is just to reduce
 	the memory usage.  See |Terminal-Normal|.
+	Also used as a limit for text sent to the terminal in one write,
+	multiplied by the number of columns times 3 (average number of bytes
+	per cell).
 
 						*'termwinsize'* *'tws'*
 'termwinsize' 'tws'	string	(default "")
@@ -8049,6 +8103,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 			feature}
 	This option specifies a function to be used for thesaurus completion
 	with CTRL-X CTRL-T. |i_CTRL-X_CTRL-T| See |compl-thesaurusfunc|.
+	The value can be the name of a function, a |lambda| or a |Funcref|.
+	See |option-value-function| for more information.
 
 	This option cannot be set from a |modeline| or in the |sandbox|, for
 	security reasons.
@@ -8119,8 +8175,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 						*'title'* *'notitle'*
 'title'			boolean	(default off, on when title can be restored)
 			global
-			{not available when compiled without the |+title|
-			feature}
 	When on, the title of the window will be set to the value of
 	'titlestring' (if it is not empty), or to:
 		filename [+=-] (path) - VIM
@@ -8154,8 +8208,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 								*'titlelen'*
 'titlelen'		number	(default 85)
 			global
-			{not available when compiled without the |+title|
-			feature}
 	Gives the percentage of 'columns' to use for the length of the window
 	title.  When the title is longer, only the end of the path name is
 	shown.  A '<' character before the path name is used to indicate this.
@@ -8169,8 +8221,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 						*'titleold'*
 'titleold'		string	(default "Thanks for flying Vim")
 			global
-			{only available when compiled with the |+title|
-			feature}
 	This option will be used for the window title when exiting Vim if the
 	original title cannot be restored.  Only happens if 'title' is on or
 	'titlestring' is not empty.
@@ -8179,8 +8229,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 						*'titlestring'*
 'titlestring'		string	(default "")
 			global
-			{not available when compiled without the |+title|
-			feature}
 	When this option is not empty, it will be used for the title of the
 	window.  This happens only when the 'title' option is on.
 	Only works if the terminal supports setting window titles (currently

runtime/doc/pi_zip.txt

@@ -1,4 +1,4 @@
-*pi_zip.txt*	For Vim version 8.2.  Last change: 2020 Jan 07
+*pi_zip.txt*	For Vim version 8.2.  Last change: 2021 Nov 08
 
 				+====================+
 				| Zip File Interface |
@@ -102,6 +102,9 @@ Copyright: Copyright (C) 2005-2015 Charles E Campbell	 *zip-copyright*
 
 ==============================================================================
 4. History							*zip-history* {{{1
+   v32 Oct 22, 2021 * to avoid an issue with a vim 8.2 patch, zipfile: has
+   		      been changed to zipfile:// . This often shows up
+		      as zipfile:/// with zipped files that are root-based.
    v29 Apr 02, 2017 * (Klartext) reported that an encrypted zip file could
    		      opened but the swapfile held unencrypted contents.
 		      The solution is to edit the contents of a zip file

runtime/doc/popup.txt

@@ -1,4 +1,4 @@
-*popup.txt*  For Vim version 8.2.  Last change: 2021 Aug 15
+*popup.txt*  For Vim version 8.2.  Last change: 2021 Nov 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -681,6 +681,9 @@ The second argument of |popup_create()| is a dictionary with options:
 			popup does not have a border. As soon as dragging
 			starts and "pos" is "center" it is changed to
 			"topleft".
+	dragall		TRUE to allow the popup to be dragged from every
+			position.  Makes it very difficult to select text in
+			the popup.
 	resize		TRUE to allow the popup to be resized with the mouse
 			by grabbing at the bottom right corner.  Has no effect
 			if the popup does not have a border.

runtime/doc/quickfix.txt

@@ -1,4 +1,4 @@
-*quickfix.txt*  For Vim version 8.2.  Last change: 2021 May 22
+*quickfix.txt*  For Vim version 8.2.  Last change: 2021 Dec 03
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -856,9 +856,9 @@ lists.  They set one of the existing error lists as the current one.
 						*:chistory* *:chi*
 :[count]chi[story]	Show the list of error lists.  The current list is
 			marked with ">".  The output looks like:
-				  error list 1 of 3; 43 errors ~
-				> error list 2 of 3; 0 errors ~
-				  error list 3 of 3; 15 errors ~
+			  error list 1 of 3; 43 errors   :make  ~
+			> error list 2 of 3; 0 errors    :helpgrep tag  ~
+			  error list 3 of 3; 15 errors   :grep ex_help *.c ~
 
 			When [count] is given, then the count'th quickfix
 			list is made the current list. Example: >

runtime/doc/quickref.txt

@@ -635,6 +635,7 @@ Short explanation of each option:		*option-list*
 'buflisted'	  'bl'	    whether the buffer shows up in the buffer list
 'buftype'	  'bt'	    special type of buffer
 'casemap'	  'cmp'     specifies how case of letters is changed
+'cdhome'	  'cdh'	    change directory to the home directory by ":cd"
 'cdpath'	  'cd'	    list of directories searched with ":cd"
 'cedit'			    key used to open the command-line window
 'charconvert'	  'ccv'     expression for character encoding conversion

runtime/doc/repeat.txt

@@ -1,4 +1,4 @@
-*repeat.txt*    For Vim version 8.2.  Last change: 2021 Sep 09
+*repeat.txt*    For Vim version 8.2.  Last change: 2021 Nov 24
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -792,6 +792,10 @@ won't be very helpful.
 
 There is a separate command-line history for debug mode.
 
+NOTE: In Vim9 script, if a command is written at the script level and
+continues on the next line, not using the old way with a backslash for line
+continuation, only the first line is printed before the debugging prompt.
+
 The line number for a function line is relative to the start of the function.
 If you have trouble figuring out where you are, edit the file that defines
 the function in another Vim, search for the start of the function and do

runtime/doc/sign.txt

@@ -1,4 +1,4 @@
-*sign.txt*      For Vim version 8.2.  Last change: 2021 Mar 07
+*sign.txt*      For Vim version 8.2.  Last change: 2021 Dec 05
 
 
 		  VIM REFERENCE MANUAL    by Gordon Prieur
@@ -53,6 +53,8 @@ The color of the column is set with the SignColumn highlight group
 
 	:highlight SignColumn guibg=darkgrey
 <
+If 'cursorline' is enabled, then the CursorLineSign highlight group is used
+|hl-CursorLineSign|.
 							*sign-identifier*
 Each placed sign is identified by a number called the sign identifier. This
 identifier is used to jump to the sign or to remove the sign. The identifier
@@ -146,6 +148,10 @@ See |sign_define()| for the equivalent Vim script function.
 	texthl={group}
 		Highlighting group used for the text item.
 
+	culhl={group}
+		Highlighting group used for the text item when the cursor is
+		on the same line as the sign and 'cursorline' is enabled.
+
 	Example: >
 		:sign define MySign text=>> texthl=Search linehl=DiffText
 <
@@ -393,6 +399,9 @@ sign_define({list})
 		   text		text that is displayed when there is no icon
 				or the GUI is not being used.
 		   texthl	highlight group used for the text item
+		   culhl	highlight group used for the text item when
+				the cursor is on the same line as the sign and
+				'cursorline' is enabled.
 
 		If the sign named {name} already exists, then the attributes
 		of the sign are updated.
@@ -432,11 +441,16 @@ sign_getdefined([{name}])				*sign_getdefined()*
 		following entries:
 		   icon		full path to the bitmap file of the sign
 		   linehl	highlight group used for the whole line the
-				sign is placed in.
+				sign is placed in; not present if not set
 		   name		name of the sign
 		   text		text that is displayed when there is no icon
 				or the GUI is not being used.
-		   texthl	highlight group used for the text item
+		   texthl	highlight group used for the text item; not
+				present if not set
+		   culhl	highlight group used for the text item when
+				the cursor is on the same line as the sign and
+				'cursorline' is enabled; not present if not
+				set
 
 		Returns an empty List if there are no signs and when {name} is
 		not found.

runtime/doc/syntax.txt

@@ -1,4 +1,4 @@
-*syntax.txt*	For Vim version 8.2.  Last change: 2021 Aug 16
+*syntax.txt*	For Vim version 8.2.  Last change: 2021 Nov 20
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -1081,33 +1081,47 @@ This works immediately.
 
 CLOJURE							*ft-clojure-syntax*
 
-The default syntax groups can be augmented through the
-*g:clojure_syntax_keywords* and *b:clojure_syntax_keywords* variables. The
-value should be a |Dictionary| of syntax group names to a |List| of custom
-identifiers:
+						*g:clojure_syntax_keywords*
+
+Syntax highlighting of public vars in "clojure.core" is provided by default,
+but additional symbols can be highlighted by adding them to the
+|g:clojure_syntax_keywords| variable.  The value should be a |Dictionary| of
+syntax group names, each containing a |List| of identifiers.
 >
 	let g:clojure_syntax_keywords = {
-	    \ 'clojureMacro': ["defproject", "defcustom"],
-	    \ 'clojureFunc': ["string/join", "string/replace"]
+	    \   'clojureMacro': ["defproject", "defcustom"],
+	    \   'clojureFunc': ["string/join", "string/replace"]
 	    \ }
 <
 Refer to the Clojure syntax script for valid syntax group names.
 
-If the |buffer-variable| *b:clojure_syntax_without_core_keywords* is set, only
-language constants and special forms are matched.
+There is also *b:clojure_syntax_keywords* which is a buffer-local variant of
+this variable intended for use by plugin authors to highlight symbols
+dynamically.
 
-Setting *g:clojure_fold* enables folding Clojure code via the syntax engine.
-Any list, vector, or map that extends over more than one line can be folded
-using the standard Vim |fold-commands|.
+By setting the *b:clojure_syntax_without_core_keywords* variable, vars from
+"clojure.core" will not be highlighted by default.  This is useful for
+namespaces that have set `(:refer-clojure :only [])`
 
-Please note that this option does not work with scripts that redefine the
-bracket syntax regions, such as rainbow-parentheses plugins.
 
-This option is off by default.
+							*g:clojure_fold*
+
+Setting |g:clojure_fold| to `1` will enable the folding of Clojure code.  Any
+list, vector or map that extends over more than one line can be folded using
+the standard Vim |fold-commands|.
+
+
+						*g:clojure_discard_macro*
+
+Set this variable to `1` to enable basic highlighting of Clojure's "discard
+reader macro".
 >
-	" Default
-	let g:clojure_fold = 0
+	#_(defn foo [x]
+	    (println x))
 <
+Note that this option will not correctly highlight stacked discard macros
+(e.g. `#_#_`).
+
 
 COBOL						*cobol.vim* *ft-cobol-syntax*
 
@@ -1519,6 +1533,14 @@ gvim display.  Here, statements are colored LightYellow instead of Yellow, and
 conditionals are LightBlue for better distinction.
 
 
+FORTH						*forth.vim* *ft-forth-syntax*
+
+Files matching "*.fs" could be F# or Forth.  If the automatic detection
+doesn't work for you, or you don't edit F# at all, use this in your
+startup vimrc: >
+   :let filetype_fs = "forth"
+
+
 FORTRAN					*fortran.vim* *ft-fortran-syntax*
 
 Default highlighting and dialect ~
@@ -1673,16 +1695,6 @@ as Fvwm2 configuration files, add the following: >
   :au! BufNewFile,BufRead /etc/X11/fvwm2/*  let b:fvwm_version = 2 |
 					 \ set filetype=fvwm
 
-If you'd like Vim to highlight all valid color names, tell it where to
-find the color database (rgb.txt) on your system.  Do this by setting
-"rgb_file" to its location.  Assuming your color database is located
-in /usr/X11/lib/X11/, you should add the line >
-
-	:let rgb_file = "/usr/X11/lib/X11/rgb.txt"
-
-to your .vimrc file.
-
-
 GSP						*gsp.vim* *ft-gsp-syntax*
 
 The default coloring style for GSP pages is defined by |html.vim|, and
@@ -3184,6 +3196,14 @@ buffer by buffer basis.
 For more detailed instructions see |ft_sql.txt|.
 
 
+SQUIRREL				*squirrel.vim* *ft-squirrel-syntax*
+
+Squirrel is a high level imperative, object-oriented programming language,
+designed to be a light-weight scripting language that fits in the size, memory
+bandwidth, and real-time requirements of applications like video games.  Files
+with the following extensions are recognized as squirrel files: .nut.
+
+
 TCSH						*tcsh.vim* *ft-tcsh-syntax*
 
 This covers the shell named "tcsh".  It is a superset of csh.  See |csh.vim|
@@ -4830,16 +4850,28 @@ in their own color.
 			Doesn't work recursively, thus you can't use
 			":colorscheme" in a color scheme script.
 
-			To customize a color scheme use another name, e.g.
+			You have two options for customizing a color scheme.
+			For changing the appearance of specific colors, you
+			can redefine a color name before loading the scheme.
+			The desert scheme uses the khaki color for the cursor.
+			To use a darker variation of the same color: >
+
+				let v:colornames['khaki'] = '#bdb76b'
+				colorscheme desert
+<
+			For further customization, such as changing
+			|:highlight-link| associations, use another name, e.g.
 			"~/.vim/colors/mine.vim", and use `:runtime` to load
 			the original color scheme: >
 				runtime colors/evening.vim
 				hi Statement ctermfg=Blue guifg=Blue
 
-<			Before the color scheme will be loaded the
-			|ColorSchemePre| autocommand event is triggered.
-			After the color scheme has been loaded the
-			|ColorScheme| autocommand event is triggered.
+<			Before the color scheme will be loaded all default
+			color list scripts (`colors/lists/default.vim`) will
+			be executed and then the |ColorSchemePre| autocommand
+			event is triggered.  After the color scheme has been
+			loaded the |ColorScheme| autocommand event is
+			triggered.
 			For info about writing a color scheme file: >
 				:edit $VIMRUNTIME/colors/README.txt
 
@@ -4849,6 +4881,7 @@ in their own color.
 :hi[ghlight] {group-name}
 			List one highlight group.
 
+						*highlight-clear*
 :hi[ghlight] clear	Reset all highlighting to the defaults.  Removes all
 			highlighting for groups added by the user!
 			Uses the current value of 'background' to decide which
@@ -4862,7 +4895,9 @@ in their own color.
 
 :hi[ghlight] [default] {group-name} {key}={arg} ..
 			Add a highlight group, or change the highlighting for
-			an existing group.
+			an existing group. If a given color name is not
+			recognized, each `colors/lists/default.vim` found on
+			|'runtimepath'| will be loaded.
 			See |highlight-args| for the {key}={arg} arguments.
 			See |:highlight-default| for the optional [default]
 			argument.
@@ -5232,6 +5267,10 @@ LineNrBelow	Line number for when the 'relativenumber'
 							*hl-CursorLineNr*
 CursorLineNr	Like LineNr when 'cursorline' is set and 'cursorlineopt'
 		contains "number" or is "both", for the cursor line.
+							*hl-CursorLineSign*
+CursorLineSign	Like SignColumn when 'cursorline' is set for the cursor line.
+							*hl-CursorLineFold*
+CursorLineFold	Like FoldColumn when 'cursorline' is set for the cursor line.
 							*hl-MatchParen*
 MatchParen	The character under the cursor or just before it, if it
 		is a paired bracket, and its match. |pi_paren.txt|
@@ -5458,7 +5497,7 @@ For Unix you can use the file ~/.vim/after/syntax/syncolor.vim.  Example: >
 	else
 	  highlight comment ctermfg=green guifg=green
 	endif
-
+<
 								*E679*
 Do make sure this syncolor.vim script does not use a "syntax on", set the
 'background' option or uses a "colorscheme" command, because it results in an
@@ -5471,11 +5510,11 @@ depends on the color scheme file.  See |:colorscheme|.
 							*syntax_cmd*
 The "syntax_cmd" variable is set to one of these values when the
 syntax/syncolor.vim files are loaded:
-   "on"		":syntax on" command.  Highlight colors are overruled but
+   "on"		`:syntax on` command.  Highlight colors are overruled but
 		links are kept
-   "enable"	":syntax enable" command.  Only define colors for groups that
-		don't have highlighting yet.  Use ":syntax default".
-   "reset"	":syntax reset" command or loading a color scheme.  Define all
+   "enable"	`:syntax enable` command.  Only define colors for groups that
+		don't have highlighting yet.  Use `:highlight default` .
+   "reset"	`:syntax reset` command or loading a color scheme.  Define all
 		the colors.
    "skip"	Don't define colors.  Used to skip the default settings when a
 		syncolor.vim file earlier in 'runtimepath' has already set

runtime/doc/tags

@@ -118,6 +118,8 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'cc'	options.txt	/*'cc'*
 'ccv'	options.txt	/*'ccv'*
 'cd'	options.txt	/*'cd'*
+'cdh'	options.txt	/*'cdh'*
+'cdhome'	options.txt	/*'cdhome'*
 'cdpath'	options.txt	/*'cdpath'*
 'cedit'	options.txt	/*'cedit'*
 'cf'	options.txt	/*'cf'*
@@ -2307,6 +2309,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :command-completion-custom	map.txt	/*:command-completion-custom*
 :command-completion-customlist	map.txt	/*:command-completion-customlist*
 :command-count	map.txt	/*:command-count*
+:command-keepscript	map.txt	/*:command-keepscript*
 :command-modifiers	map.txt	/*:command-modifiers*
 :command-nargs	map.txt	/*:command-nargs*
 :command-range	map.txt	/*:command-range*
@@ -2753,6 +2756,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :map-<unique>	map.txt	/*:map-<unique>*
 :map-alt-keys	map.txt	/*:map-alt-keys*
 :map-arguments	map.txt	/*:map-arguments*
+:map-buffer	map.txt	/*:map-buffer*
 :map-cmd	map.txt	/*:map-cmd*
 :map-commands	map.txt	/*:map-commands*
 :map-expression	map.txt	/*:map-expression*
@@ -2766,6 +2770,7 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 :map-special-chars	map.txt	/*:map-special-chars*
 :map-special-keys	map.txt	/*:map-special-keys*
 :map-undo	map.txt	/*:map-undo*
+:map-unique	map.txt	/*:map-unique*
 :map-verbose	map.txt	/*:map-verbose*
 :map_l	map.txt	/*:map_l*
 :map_l!	map.txt	/*:map_l!*
@@ -3950,7 +3955,6 @@ E107	eval.txt	/*E107*
 E108	eval.txt	/*E108*
 E109	eval.txt	/*E109*
 E1091	vim9.txt	/*E1091*
-E1092	vim9.txt	/*E1092*
 E1094	vim9.txt	/*E1094*
 E11	cmdline.txt	/*E11*
 E110	eval.txt	/*E110*
@@ -3997,6 +4001,8 @@ E1237	map.txt	/*E1237*
 E1239	eval.txt	/*E1239*
 E124	eval.txt	/*E124*
 E1243	options.txt	/*E1243*
+E1244	message.txt	/*E1244*
+E1245	cmdline.txt	/*E1245*
 E125	eval.txt	/*E125*
 E126	eval.txt	/*E126*
 E127	eval.txt	/*E127*
@@ -5241,6 +5247,7 @@ WORD	motion.txt	/*WORD*
 WWW	intro.txt	/*WWW*
 Win32	os_win32.txt	/*Win32*
 WinBar	gui.txt	/*WinBar*
+WinClosed	autocmd.txt	/*WinClosed*
 WinEnter	autocmd.txt	/*WinEnter*
 WinLeave	autocmd.txt	/*WinLeave*
 WinNew	autocmd.txt	/*WinNew*
@@ -5459,6 +5466,7 @@ arglistid()	eval.txt	/*arglistid()*
 argument-list	editing.txt	/*argument-list*
 argv()	eval.txt	/*argv()*
 argv-variable	eval.txt	/*argv-variable*
+arrow_modifiers	term.txt	/*arrow_modifiers*
 as	motion.txt	/*as*
 asin()	eval.txt	/*asin()*
 asm.vim	syntax.txt	/*asm.vim*
@@ -6558,6 +6566,7 @@ format-bullet-list	tips.txt	/*format-bullet-list*
 format-comments	change.txt	/*format-comments*
 format-formatexpr	change.txt	/*format-formatexpr*
 formatting	change.txt	/*formatting*
+forth.vim	syntax.txt	/*forth.vim*
 fortran.vim	syntax.txt	/*fortran.vim*
 friendship	intro.txt	/*friendship*
 frombook	usr_01.txt	/*frombook*
@@ -6611,6 +6620,7 @@ ft-erlang-syntax	syntax.txt	/*ft-erlang-syntax*
 ft-euphoria-syntax	syntax.txt	/*ft-euphoria-syntax*
 ft-flexwiki-syntax	syntax.txt	/*ft-flexwiki-syntax*
 ft-form-syntax	syntax.txt	/*ft-form-syntax*
+ft-forth-syntax	syntax.txt	/*ft-forth-syntax*
 ft-fortran-indent	indent.txt	/*ft-fortran-indent*
 ft-fortran-plugin	filetype.txt	/*ft-fortran-plugin*
 ft-fortran-syntax	syntax.txt	/*ft-fortran-syntax*
@@ -6702,6 +6712,7 @@ ft-sql-omni	insert.txt	/*ft-sql-omni*
 ft-sql-syntax	syntax.txt	/*ft-sql-syntax*
 ft-sqlanywhere-syntax	syntax.txt	/*ft-sqlanywhere-syntax*
 ft-sqlinformix-syntax	syntax.txt	/*ft-sqlinformix-syntax*
+ft-squirrel-syntax	syntax.txt	/*ft-squirrel-syntax*
 ft-syntax-omni	insert.txt	/*ft-syntax-omni*
 ft-tcsh-syntax	syntax.txt	/*ft-tcsh-syntax*
 ft-termcap-syntax	syntax.txt	/*ft-termcap-syntax*
@@ -6791,6 +6802,7 @@ g:ada_with_gnat_project_files	ft_ada.txt	/*g:ada_with_gnat_project_files*
 g:ada_withuse_ordinary	ft_ada.txt	/*g:ada_withuse_ordinary*
 g:clojure_align_multiline_strings	indent.txt	/*g:clojure_align_multiline_strings*
 g:clojure_align_subforms	indent.txt	/*g:clojure_align_subforms*
+g:clojure_discard_macro	syntax.txt	/*g:clojure_discard_macro*
 g:clojure_fold	syntax.txt	/*g:clojure_fold*
 g:clojure_fuzzy_indent	indent.txt	/*g:clojure_fuzzy_indent*
 g:clojure_fuzzy_indent_blacklist	indent.txt	/*g:clojure_fuzzy_indent_blacklist*
@@ -7262,6 +7274,7 @@ hasmapto()	eval.txt	/*hasmapto()*
 hebrew	hebrew.txt	/*hebrew*
 hebrew.txt	hebrew.txt	/*hebrew.txt*
 help	helphelp.txt	/*help*
+help-buffer-options	helphelp.txt	/*help-buffer-options*
 help-context	help.txt	/*help-context*
 help-curwin	tips.txt	/*help-curwin*
 help-summary	usr_02.txt	/*help-summary*
@@ -7270,7 +7283,6 @@ help-translated	helphelp.txt	/*help-translated*
 help-writing	helphelp.txt	/*help-writing*
 help-xterm-window	helphelp.txt	/*help-xterm-window*
 help.txt	help.txt	/*help.txt*
-helpfile_name.txt	helphelp.txt	/*helpfile_name.txt*
 helphelp	helphelp.txt	/*helphelp*
 helphelp.txt	helphelp.txt	/*helphelp.txt*
 hex-editing	tips.txt	/*hex-editing*
@@ -7282,6 +7294,7 @@ hidden-options	options.txt	/*hidden-options*
 hidden-quit	windows.txt	/*hidden-quit*
 highlight-args	syntax.txt	/*highlight-args*
 highlight-changed	version4.txt	/*highlight-changed*
+highlight-clear	syntax.txt	/*highlight-clear*
 highlight-cterm	syntax.txt	/*highlight-cterm*
 highlight-ctermbg	syntax.txt	/*highlight-ctermbg*
 highlight-ctermfg	syntax.txt	/*highlight-ctermfg*
@@ -7317,7 +7330,9 @@ hl-Cursor	syntax.txt	/*hl-Cursor*
 hl-CursorColumn	syntax.txt	/*hl-CursorColumn*
 hl-CursorIM	syntax.txt	/*hl-CursorIM*
 hl-CursorLine	syntax.txt	/*hl-CursorLine*
+hl-CursorLineFold	syntax.txt	/*hl-CursorLineFold*
 hl-CursorLineNr	syntax.txt	/*hl-CursorLineNr*
+hl-CursorLineSign	syntax.txt	/*hl-CursorLineSign*
 hl-DiffAdd	syntax.txt	/*hl-DiffAdd*
 hl-DiffChange	syntax.txt	/*hl-DiffChange*
 hl-DiffDelete	syntax.txt	/*hl-DiffDelete*
@@ -7375,7 +7390,9 @@ hl-debugBreakpoint	terminal.txt	/*hl-debugBreakpoint*
 hl-debugPC	terminal.txt	/*hl-debugPC*
 hlID()	eval.txt	/*hlID()*
 hlexists()	eval.txt	/*hlexists()*
+hlget()	eval.txt	/*hlget()*
 hlsearch-variable	eval.txt	/*hlsearch-variable*
+hlset()	eval.txt	/*hlset()*
 holy-grail	index.txt	/*holy-grail*
 home	intro.txt	/*home*
 home-replace	editing.txt	/*home-replace*
@@ -8415,6 +8432,7 @@ operator-variable	eval.txt	/*operator-variable*
 option-backslash	options.txt	/*option-backslash*
 option-list	quickref.txt	/*option-list*
 option-summary	options.txt	/*option-summary*
+option-value-function	options.txt	/*option-value-function*
 option-window	options.txt	/*option-window*
 option_restore()	todo.txt	/*option_restore()*
 option_save()	todo.txt	/*option_save()*
@@ -8537,6 +8555,7 @@ plugin	usr_05.txt	/*plugin*
 plugin-details	filetype.txt	/*plugin-details*
 plugin-filetype	usr_41.txt	/*plugin-filetype*
 plugin-special	usr_41.txt	/*plugin-special*
+plugin_name.txt	helphelp.txt	/*plugin_name.txt*
 pmbcs-option	print.txt	/*pmbcs-option*
 pmbfn-option	print.txt	/*pmbfn-option*
 popt-option	print.txt	/*popt-option*
@@ -8689,6 +8708,7 @@ python-command	if_pyth.txt	/*python-command*
 python-commands	if_pyth.txt	/*python-commands*
 python-current	if_pyth.txt	/*python-current*
 python-dynamic	if_pyth.txt	/*python-dynamic*
+python-environment	if_pyth.txt	/*python-environment*
 python-error	if_pyth.txt	/*python-error*
 python-eval	if_pyth.txt	/*python-eval*
 python-examples	if_pyth.txt	/*python-examples*
@@ -8935,6 +8955,7 @@ save-file	editing.txt	/*save-file*
 save-settings	starting.txt	/*save-settings*
 scheme.vim	syntax.txt	/*scheme.vim*
 scp	pi_netrw.txt	/*scp*
+scratch-buffer	windows.txt	/*scratch-buffer*
 screenattr()	eval.txt	/*screenattr()*
 screenchar()	eval.txt	/*screenchar()*
 screenchars()	eval.txt	/*screenchars()*
@@ -9062,6 +9083,9 @@ simulated-command	vi_diff.txt	/*simulated-command*
 sin()	eval.txt	/*sin()*
 single-repeat	repeat.txt	/*single-repeat*
 sinh()	eval.txt	/*sinh()*
+sizeofint-variable	eval.txt	/*sizeofint-variable*
+sizeoflong-variable	eval.txt	/*sizeoflong-variable*
+sizeofpointer-variable	eval.txt	/*sizeofpointer-variable*
 skeleton	autocmd.txt	/*skeleton*
 skip_defaults_vim	starting.txt	/*skip_defaults_vim*
 slice	eval.txt	/*slice*
@@ -9226,6 +9250,7 @@ sqlj	ft_sql.txt	/*sqlj*
 sqlserver	ft_sql.txt	/*sqlserver*
 sqlsettype	ft_sql.txt	/*sqlsettype*
 sqrt()	eval.txt	/*sqrt()*
+squirrel.vim	syntax.txt	/*squirrel.vim*
 srand()	eval.txt	/*srand()*
 sscanf	eval.txt	/*sscanf*
 standard-plugin	usr_05.txt	/*standard-plugin*
@@ -9938,6 +9963,7 @@ v:charconvert_to	eval.txt	/*v:charconvert_to*
 v:cmdarg	eval.txt	/*v:cmdarg*
 v:cmdbang	eval.txt	/*v:cmdbang*
 v:collate	eval.txt	/*v:collate*
+v:colornames	eval.txt	/*v:colornames*
 v:completed_item	eval.txt	/*v:completed_item*
 v:count	eval.txt	/*v:count*
 v:count1	eval.txt	/*v:count1*
@@ -9993,6 +10019,9 @@ v:scrollstart	eval.txt	/*v:scrollstart*
 v:searchforward	eval.txt	/*v:searchforward*
 v:servername	eval.txt	/*v:servername*
 v:shell_error	eval.txt	/*v:shell_error*
+v:sizeofint	eval.txt	/*v:sizeofint*
+v:sizeoflong	eval.txt	/*v:sizeoflong*
+v:sizeofpointer	eval.txt	/*v:sizeofpointer*
 v:statusmsg	eval.txt	/*v:statusmsg*
 v:swapchoice	eval.txt	/*v:swapchoice*
 v:swapcommand	eval.txt	/*v:swapcommand*

runtime/doc/term.txt

@@ -1,4 +1,4 @@
-*term.txt*      For Vim version 8.2.  Last change: 2021 Aug 29
+*term.txt*      For Vim version 8.2.  Last change: 2021 Dec 08
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -150,8 +150,10 @@ terminal that tmux is running in): >
         " Enable focus event tracking, see  :help xterm-focus-event
         let &t_fe = "\<Esc>[?1004h"
         let &t_fd = "\<Esc>[?1004l"
+	execute "set <FocusGained>=\<Esc>[I"
+        execute "set <FocusLost>=\<Esc>[O"
 
-        " Enable modified arrow keys, see  :help xterm-modifier-keys
+        " Enable modified arrow keys, see  :help arrow_modifiers
         execute "silent! set <xUp>=\<Esc>[@;*A"
         execute "silent! set <xDown>=\<Esc>[@;*B"
         execute "silent! set <xRight>=\<Esc>[@;*C"
@@ -252,7 +254,19 @@ another code.  That is to avoid that the codes obtained from xterm directly
 Another special value is a termcap entry ending in "@;*X".  This is for cursor
 keys, which either use "CSI X" or "CSI 1 ; modifier X".  Thus the "@"
 stands for either "1" if a modifier follows, or nothing.
-							*xterm-scroll-region*
+							*arrow_modifiers*
+Several terminal emulators (alacritty, gnome, konsole, etc.) send special
+codes for keys with modifiers, but these do not have an entry in the
+termcap/terminfo database.  You can make them work by adding a few lines in
+your vimrc.  For example, to make the Control modifier work with arrow keys
+for the gnome terminal: >
+	if &term =~ 'gnome'
+	   execute "set <xUp>=\<Esc>[@;*A"
+	   execute "set <xDown>=\<Esc>[@;*B"
+	   execute "set <xRight>=\<Esc>[@;*C"
+	   execute "set <xLeft>=\<Esc>[@;*D"
+	endif
+<							*xterm-scroll-region*
 The default termcap entry for xterm on Sun and other platforms does not
 contain the entry for scroll regions.  Add ":cs=\E[%i%d;%dr:" to the xterm
 entry in /etc/termcap and everything should work.
@@ -594,6 +608,8 @@ If your terminal does support this but Vim does not recognize the terminal,
 you may have to set the options yourself: >
 	let &t_fe = "\<Esc>[?1004h"
 	let &t_fd = "\<Esc>[?1004l"
+	execute "set <FocusGained>=\<Esc>[I"
+        execute "set <FocusLost>=\<Esc>[O"
 If this causes garbage to show when Vim starts up then it doesn't work.
 
 							*termcap-colors*

runtime/doc/terminal.txt

@@ -1,4 +1,4 @@
-*terminal.txt*	For Vim version 8.2.  Last change: 2021 Aug 15
+*terminal.txt*	For Vim version 8.2.  Last change: 2021 Nov 13
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -240,7 +240,7 @@ Command syntax ~
 			++shell		Instead of executing {command}
 					directly, use a shell, like with
 					`:!command` 		*E279*
-					{only works on Unix currently}
+					{only works on Unix and MS-Windows}
 			++kill={how}	When trying to close the terminal
 					window kill the job with {how}.  See
 					|term_setkill()| for the values.
@@ -871,7 +871,8 @@ term_start({cmd} [, {options}])			*term_start()*
 		   "term_name"	     name to use for the buffer name, instead
 				     of the command name.
 		   "term_rows"	     vertical size to use for the terminal,
-				     instead of using 'termwinsize'
+				     instead of using 'termwinsize'; valid
+				     range is from zero to 1000
 		   "term_cols"	     horizontal size to use for the terminal,
 				     instead of using 'termwinsize'
 		   "vertical"	     split the window vertically; note that

runtime/doc/testing.txt

@@ -1,4 +1,4 @@
-*testing.txt*	For Vim version 8.2.  Last change: 2021 Aug 15
+*testing.txt*	For Vim version 8.2.  Last change: 2021 Dec 11
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -65,7 +65,8 @@ test_garbagecollect_now()			 *test_garbagecollect_now()*
 		Like garbagecollect(), but executed right away.  This must
 		only be called directly to avoid any structure to exist
 		internally, and |v:testing| must have been set before calling
-		any function.
+		any function.  This will not work when called from a :def
+		function, because variables on the stack will be freed.
 
 
 test_garbagecollect_soon()			 *test_garbagecollect_soon()*

runtime/doc/textprop.txt

@@ -1,4 +1,4 @@
-*textprop.txt*  For Vim version 8.2.  Last change: 2021 Aug 16
+*textprop.txt*  For Vim version 8.2.  Last change: 2021 Nov 23
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -230,13 +230,25 @@ prop_find({props} [, {direction}])
 
 
 prop_list({lnum} [, {props}])				*prop_list()*
-		Return a List with all text properties in line {lnum}.
+		Returns a List with all the text properties in line {lnum}.
 
-		When {props} contains a "bufnr" item, use this buffer instead
-		of the current buffer.
+		The following optional items are supported in {props}:
+		   bufnr	use this buffer instead of the current buffer
+		   end_lnum	return text properties in all the lines
+				between {lnum} and {end_lnum} (inclusive).
+				A negative value is used as an offset from the
+				last buffer line; -1 refers to the last buffer
+				line.
+		   types	List of property type names. Return only text
+				properties that match one of the type names.
+		   ids		List of property identifiers. Return only text
+				properties with one of these identifiers.
 
 		The properties are ordered by starting column and priority.
 		Each property is a Dict with these entries:
+		   lnum		starting line number. Present only when
+				returning text properties between {lnum} and
+				{end_lnum}.
 		   col		starting column
 		   length	length in bytes, one more if line break is
 				included
@@ -253,6 +265,30 @@ prop_list({lnum} [, {props}])				*prop_list()*
 		When "end" is zero the property continues in the next line.
 		The line break after this line is included.
 
+		Returns an empty list on error.
+
+		Examples:
+		   " get text properties placed in line 5
+		   echo prop_list(5)
+		   " get text properties placed in line 20 in buffer 4
+		   echo prop_list(20, {'bufnr': 4})
+		   " get all the text properties between line 1 and 20
+		   echo prop_list(1, {'end_lnum': 20})
+		   " get all the text properties of type 'myprop'
+		   echo prop_list(1, {'types': ['myprop'],
+						\ 'end_lnum': -1})
+		   " get all the text properties of type 'prop1' or 'prop2'
+		   echo prop_list(1, {'types': ['prop1', 'prop2'],
+						\ 'end_lnum': -1})
+		   " get all the text properties with ID 8
+		   echo prop_list(1, {'ids': [8], 'end_lnum': line('$')})
+		   " get all the text properties with ID 10 and 20
+		   echo prop_list(1, {'ids': [10, 20], 'end_lnum': -1})
+		   " get text properties with type 'myprop' and ID 100
+		   " in buffer 4.
+		   echo prop_list(1, {'bufnr': 4, 'types': ['myprop'],
+					\ 'ids': [100], 'end_lnum': -1})
+
 		Can also be used as a |method|: >
 			GetLnum()->prop_list()
 <

runtime/doc/tips.txt

@@ -1,4 +1,4 @@
-*tips.txt*      For Vim version 8.2.  Last change: 2020 Dec 29
+*tips.txt*      For Vim version 8.2.  Last change: 2021 Nov 06
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -549,6 +549,7 @@ the current window, try this custom `:HelpCurwin` command:
 	  endif
 	  if !getcompletion(a:subject, 'help')->empty()
 	    execute mods .. ' edit ' .. &helpfile
+	    set buftype=help
 	  endif
 	  return 'help ' .. a:subject
 	endfunction

runtime/doc/todo.txt

@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 8.2.  Last change: 2021 Oct 16
+*todo.txt*      For Vim version 8.2.  Last change: 2021 Dec 15
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -39,11 +39,7 @@ browser use: https://github.com/vim/vim/issues/1234
 -------------------- Known bugs and current work -----------------------
 
 Vim9 - Make everything work:
-- "filter #pat# ls" should work, #pat# is not a comment
-    vim9script
-    edit foobar
-    filter #foobar# ls
-- Check TODO items in vim9compile.c and vim9execute.c
+- Check TODO items in  vim9execute.c
 - use CheckLegacyAndVim9Success(lines) in many more places
 - For builtin functions using tv_get_string*() use check_for_string() to be
   more strict about the argument type (not a bool).
@@ -198,8 +194,6 @@ Terminal emulator window:
 - GUI: When using ":set go+=!" a system() call causes the hit-enter prompt.
   (#3327)
 - Allow for specifying the directory, with ++cwd={dir}.
-- With a vertical split only one window is updated. (Linwei, 2018 Jun 2,
-  #2977)
 - When pasting should call vterm_keyboard_start_paste(), e.g. when using
   K_MIDDLEMOUSE, calling insert_reg().
 - Users expect parsing the :term argument like a shell does, also support
@@ -218,8 +212,6 @@ Terminal emulator window:
 - When 'encoding' is not utf-8, or the job is using another encoding, setup
   conversions.
 
-Include patch #6290: recognize shell directory change.
-
 When using 'cryptmethod' xchaha20 the undo file is not encrypted.
 Need to handle extra bytes.
 
@@ -229,6 +221,8 @@ Fails in line 64 of Ch_communicate, no exception is thrown.
 Patch for Template string: #4634
 Have another look at the implementation.
 
+Add expanding <script> which works like <sfile> everywhere. #9189
+
 Rename getdigraphlist -> digraph_getlist() etc.
 
 Valgrind reports memory leaks in test_options.
@@ -261,6 +255,10 @@ test_arglist func Test_all_not_allowed_from_cmdwin() hangs on MS-Windows.
 
 Mapping with partial match not executed properly in GTK. (Ingo Karkat, #7082)
 
+Information for a specific terminal (e.g. gnome, tmux, konsole, alacritty) is
+spread out.  Make a section with copy/paste examples of script and pointers to
+more information.
+
 Problem that a previous silent ":throw" causes a following try/catch not to
 work. (ZyX, 2013 Sep 28) With examples: (Malcolm Rowe, 2015 Dec 24)
 Also see #8487 for an example.
@@ -271,12 +269,18 @@ Was originally written by Felipe Morales.
 Request to use "." for the cursor column in search pattern \%<.c and \%<.v.
 (#8179)
 
+":filter set termcap" only filters terminal codes, not keys. (#9297)
+
+Remove SPACE_IN_FILENAME ? It is only used for completion.
+
+When 'term' starts with "foot" then default t_TI and t_TE to the values used
+for the builtin xterm termcap.
+
 Adding "10" to 'spellsuggest' causes spell suggestions to become very slow.
 (#4087)  Did patch 8.2.2379 help?
 Also, z= in German on a long word can take a very long time, but CTRL-C to
 interrupt does not work. Where to add ui_breakcheck()?
-
-Remove SPACE_IN_FILENAME ? It is only used for completion.
+New English spell files also have very slow suggestions.
 
 Searching for \%'> does not find anything when using line Visual selection.
 Probably because it's using MAXCOL.  #8238
@@ -653,14 +657,6 @@ http://vimawesome.com/?q=tag:color-scheme
 Bug: "vipgw" does not put cursor back where it belongs. (Jason Franklin, 2019
 Mar 5)
 
-Many users don't like 'thesaurus' to match so many words. (#4667, #1611)
-- when the match with the first word is partial, don't add other words on that
-  line.
-- support other file formats, such as comma separated.  Indicate by a prefix
-  to the file in the 'thesaurus' option.
-- 'threglookexp' option: only match with first word in thesaurus file.
-  (Jakson A. Aquino, 2006 Jun 14)
-
 Some composing characters actually add a cell width to the character they are
 on top off, making the whole thing two characters wide. (#4526)
 
@@ -850,9 +846,7 @@ window for the buffer.
 Win32 key codes are messy.  Mike Williams tried to fix that, but now old
 mappings no longer work.  Create a new terminal for the better solution?
 
-Compiler warnings (geeknik, 2017 Oct 26):
-- signed integer overflow in do_sub() (#2249)
-- signed integer overflow in get_address() (#2248)
+Compiler warning (geeknik, 2017 Oct 26):
 - undefined left shift in get_string_tv() (#2250)
 
 Add Native language protocol server (LSP) support. (Yegappan Lakshmanan, 2018
@@ -1472,10 +1466,6 @@ When the CursorMovedI event triggers, and CTRL-X was typed, a script cannot
 restore the mode properly. (Andrew Stewart, 2016 Apr 20)
 Do not trigger the event?
 
-Patch to fix display of listchars on the cursorline. (Nayuri Aohime, 2013)
-Update suggested by Yasuhiro Matsumoto, 2014 Nov 25:
-https://gist.github.com/presuku/d3d6b230b9b6dcfc0477
-
 Patch to make the behavior of "w" more straightforward, but not Vi compatible.
 With a 'cpo' flag.  (Christian Brabandt, 2016 Feb 8)
 
@@ -3903,7 +3893,7 @@ User Friendlier:
     $HOME/_vimrc, etc.) and add "edit vimrc" to the File menu.
 -   Add a way to save local settings and mappings into a new plugin file.
     ":mkplugin <file>"?
--   Add mappings local to a window: ":map <window> ..."?
+-   Add mappings local to a window: ":map <window> ..."  #9339
 9   Add buffer-local menu.  Should offer a choice between removing the menu or
     disabling it.  Be careful that tear-offs don't disappear (keep one empty
     item?).
@@ -4161,6 +4151,9 @@ Printing:
 
 
 Syntax highlighting:
+    Long term goal: faster, better, etc.  Options:
+    - use treesitter, NeoVim uses it
+    - use TextMate, vscode uses it.  #9087
 8   Make ":syn off" use 'runtimepath' instead of $VIMRUNTIME. (Gary Johnson)
     Should do the same for ":syn on" and ":syn manual".
 8   Support "containedin" argument for ":syn include", so that the defined

runtime/doc/usr_06.txt

@@ -1,4 +1,4 @@
-*usr_06.txt*	For Vim version 8.2.  Last change: 2019 Jun 01
+*usr_06.txt*	For Vim version 8.2.  Last change: 2021 Nov 07
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -205,7 +205,7 @@ file:
 
 As a color scheme author, you should be able to rely on some color names for
 GUI colors. These are defined in `colors/lists/default.vim`. All such files
-found on the |runtimepath| are loaded each time the colorscheme command is
+found on the |'runtimepath'| are loaded each time the colorscheme command is
 run. A canonical list is provided by the vim distribution, which should
 include all X11 colors (previously defined in rgb.txt).
 

runtime/doc/usr_20.txt

@@ -1,4 +1,4 @@
-*usr_20.txt*	For Vim version 8.2.  Last change: 2006 Apr 24
+*usr_20.txt*	For Vim version 8.2.  Last change: 2021 Nov 18
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -289,11 +289,11 @@ In chapter 3 we briefly mentioned the history.  The basics are that you can
 use the <Up> key to recall an older command line.  <Down> then takes you back
 to newer commands.
 
-There are actually four histories.  The ones we will mention here are for ":"
+There are actually five histories.  The ones we will mention here are for ":"
 commands and for "/" and "?" search commands.  The "/" and "?" commands share
-the same history, because they are both search commands.  The two other
-histories are for expressions and input lines for the input() function.
-|cmdline-history|
+the same history, because they are both search commands.  The three other
+histories are for expressions, debug mode commands and input lines for the
+input() function.  |cmdline-history|
 
 Suppose you have done a ":set" command, typed ten more colon commands and then
 want to repeat that ":set" command again.  You could press ":" and then ten

runtime/doc/usr_41.txt

@@ -925,6 +925,8 @@ Syntax and highlighting:	  *syntax-functions* *highlighting-functions*
 	getmatches()		get all matches defined by |matchadd()| and
 				the |:match| commands
 	hlexists()		check if a highlight group exists
+	hlget()			get highlight group attributes
+	hlset()			set highlight group attributes
 	hlID()			get ID of a highlight group
 	synID()			get syntax ID at a specific position
 	synIDattr()		get a specific attribute of a syntax ID

runtime/doc/various.txt

@@ -1,4 +1,4 @@
-*various.txt*   For Vim version 8.2.  Last change: 2021 Sep 06
+*various.txt*   For Vim version 8.2.  Last change: 2021 Dec 13
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -369,7 +369,7 @@ N  *+digraphs*		|digraphs| *E196*
    *+dnd*		Support for DnD into the "~ register |quote_~|.
 B  *+emacs_tags*	|emacs-tags| files
 N  *+eval*		expression evaluation |eval.txt|
-N  *+ex_extra*		always on now, used to be for Vim's extra Ex commands
+T  *+ex_extra*		always on now, used to be for Vim's extra Ex commands
 N  *+extra_search*	|'hlsearch'| and |'incsearch'| options.
 -  *+farsi*		Removed: |farsi| language
 N  *+file_in_path*	|gf|, |CTRL-W_f| and |<cfile>|
@@ -391,7 +391,7 @@ m  *+hangul_input*	Hangul input support |hangul|
 T  *+insert_expand*	|insert_expand| Insert mode completion
 m  *+ipv6*		Support for IPv6 networking |channel|
 m  *+job*		starting and stopping jobs |job|
-S  *+jumplist*		|jumplist|
+T  *+jumplist*		|jumplist|; Always enabled since 8.2.3795
 B  *+keymap*		|'keymap'|
 N  *+lambda*		|lambda| and |closure|
 B  *+langmap*		|'langmap'|
@@ -423,7 +423,7 @@ N  *+multi_lang*	non-English language support |multi-lang|
 m  *+mzscheme*		Mzscheme interface |mzscheme|
 m  *+mzscheme/dyn*	Mzscheme interface |mzscheme-dynamic| |/dyn|
 m  *+netbeans_intg*	|netbeans|
-   *+num64*		64-bit Number support |Number|
+T  *+num64*		64-bit Number support |Number|
    			Always enabled since 8.2.0271, use v:numbersize to
 			check the actual size of a Number.
 m  *+ole*		Win32 GUI only: |ole-interface|
@@ -471,15 +471,15 @@ N  *+textobjects*	|text-objects| selection
 N  *+textprop*		|text-properties|
    *+tgetent*		non-Unix only: able to use external termcap
 N  *+timers*		the |timer_start()| function
-N  *+title*		Setting the window 'title' and 'icon'
+T  *+title*		Setting the window 'title' and 'icon'; Always enabled
 N  *+toolbar*		|gui-toolbar|
 T  *+user_commands*	User-defined commands. |user-commands|
 			Always enabled since 8.1.1210.
 B  *+vartabs*		Variable-width tabstops. |'vartabstop'|
 N  *+viminfo*		|'viminfo'|
-   *+vertsplit*		Vertically split windows |:vsplit|; Always enabled
+T  *+vertsplit*		Vertically split windows |:vsplit|; Always enabled
 			since 8.0.1118.
-N  *+virtualedit*	|'virtualedit'| Always enabled since 8.1.826.
+T  *+virtualedit*	|'virtualedit'| Always enabled since 8.1.826.
 T  *+visual*		Visual mode |Visual-mode| Always enabled since 7.4.200.
 T  *+visualextra*	extra Visual mode commands |blockwise-operators|
 T  *+vreplace*		|gR| and |gr|
@@ -598,7 +598,7 @@ N  *+X11*		Unix only: can restore window title |X11|
 			   |:oldfiles|   - filter by file name
 			   |:registers|  - filter by register contents
 					   (does not work multi-line)
-			   |:set|        - filter by variable name
+			   |:set|        - filter by option name
 
 			Only normal messages are filtered, error messages are
 			not.

runtime/doc/vim9.txt

@@ -1,4 +1,4 @@
-*vim9.txt*	For Vim version 8.2.  Last change: 2021 Sep 13
+*vim9.txt*	For Vim version 8.2.  Last change: 2021 Dec 15
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -234,9 +234,10 @@ the "name#" prefix is sufficient. >
 	def scriptname#function()   # autoload
 
 When using `:function` or `:def` to specify a nested function inside a `:def`
-function, this nested function is local to the code block it is defined in.
-In a `:def` function it is not possible to define a script-local function.  It
-is possible to define a global function by using the "g:" prefix.
+function and no namespace was given, this nested function is local to the code
+block it is defined in.  In a `:def` function it is not possible to define a
+script-local function.  It is possible to define a global function by using
+the "g:" prefix.
 
 When referring to a function and no "s:" or "g:" prefix is used, Vim will
 search for the function:
@@ -420,12 +421,11 @@ similar to how a function argument can be ignored: >
 To ignore any remaining items: >
 	[a, b; _] = longList
 
-<							*E1092*
 Declaring more than one variable at a time, using the unpack notation, is
-currently not supported: >
-	var [v1, v2] = GetValues()  # Error!
-That is because the type needs to be inferred from the list item type, which
-isn't that easy.
+possible.  Each variable can have a type or infer it from the value: >
+	var [v1: number, v2] = GetValues()
+Use this only when there is a list with values, declaring one variable per
+line is much easier to read and change later.
 
 
 Constants ~
@@ -560,7 +560,6 @@ This can be useful for a timer, for example: >
 		 echom 'Handler called ' .. count
 	     }, {repeat: 3})
 
-
 The ending "}" must be at the start of a line.  It can be followed by other
 characters, e.g.: >
 	var d = mapnew(dict, (k, v): string => {
@@ -568,6 +567,24 @@ characters, e.g.: >
 	   })
 No command can follow the "{", only a comment can be used there.
 
+							*command-block*
+The block can also be used for defining a user command.  Inside the block Vim9
+syntax will be used.
+
+If the statements include a dictionary, its closing bracket must not be
+written at the start of a line.  Otherwise, it would be parsed as the end of
+the block.  This does not work: >
+	command NewCommand {
+	     g:mydict = {
+	       'key': 'value',
+	       }  # ERROR: will be recognized as the end of the block
+	   }
+Put the '}' after the last item to avoid this: >
+	command NewCommand {
+	     g:mydict = {
+	       'key': 'value' }
+	   }
+
 Rationale: The "}" cannot be after a command because it would require parsing
 the commands to find it.  For consistency with that no command can follow the
 "{".  Unfortunately this means using "() => {  command  }" does not work, line
@@ -821,6 +838,16 @@ error.  Example: >
 
 For loop ~
 
+The loop variable must not be declared yet: >
+	var i = 1
+	for i in [1, 2, 3]   # Error!
+
+It is possible to use a global variable though: >
+	g:i = 1
+	for g:i in [1, 2, 3]
+	  echo g:i
+	endfor
+
 Legacy Vim script has some tricks to make a for loop over a list handle
 deleting items at the current or previous item.  In Vim9 script it just uses
 the index, if items are deleted then items in the list will be skipped.
@@ -1121,17 +1148,11 @@ function scope.  Instead, use a lambda: >
 	  return range(1, 2)->map((_, v) => list[v])
 	enddef
 
-The same is true for commands that are not compiled, such as `:global`.
-For these the backtick expansion can be used.  Example: >
+For commands that are not compiled, such as `:edit`, backtick expansion can be
+used and it can use the local scope.  Example: >
 	def Replace()
-	  var newText = 'blah'
-	  g/pattern/s/^/`=newText`/
-	enddef
-
-Or a script variable can be used: >
-	var newText = 'blah'
-	def Replace()
-	  g/pattern/s/^/\=newText/
+	  var fname = 'blah.txt'
+	  edit `=fname`
 	enddef
 
 Closures defined in a loop will share the same context.  For example: >

runtime/doc/visual.txt

@@ -1,4 +1,4 @@
-*visual.txt*    For Vim version 8.2.  Last change: 2021 May 30
+*visual.txt*    For Vim version 8.2.  Last change: 2021 Nov 21
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -370,7 +370,8 @@ same amount of text as the last time:
   last line the same number of characters as in the last line the last time.
 The start of the text is the Cursor position.  If the "$" command was used as
 one of the last commands to extend the highlighted text, the repeating will
-be applied up to the rightmost column of the longest line.
+be applied up to the rightmost column of the longest line.  Any count passed
+to the `.` command is not used.
 
 
 ==============================================================================

runtime/doc/windows.txt

@@ -1,4 +1,4 @@
-*windows.txt*   For Vim version 8.2.  Last change: 2021 Sep 09
+*windows.txt*   For Vim version 8.2.  Last change: 2021 Nov 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1203,6 +1203,8 @@ list of buffers. |unlisted-buffer|
 		the current buffer remains being edited.  See |:buffer-!| for
 		[!].  This will also edit a buffer that is not in the buffer
 		list, without setting the 'buflisted' flag.
+		The notation with single quotes does not work here,
+		`:buf 12'345'` uses 12'345 as a buffer name.
 		Also see |+cmd|.
 
 :[N]b[uffer][!] [+cmd] {bufname}				*{bufname}*
@@ -1358,6 +1360,7 @@ directory	Displays directory contents.  Can be used by a file explorer
 <		The buffer name is the name of the directory and is adjusted
 		when using the |:cd| command.
 
+						*scratch-buffer*
 scratch		Contains text that can be discarded at any time.  It is kept
 		when closing the window, it must be deleted explicitly.
 		Settings: >

runtime/doc/xxd-fr.1

@@ -111,7 +111,7 @@ octets.
 .TP
 .IR \-p " | " \-ps " | " \-postscript " | " \-plain
 Produit une conversion continue dans le style Postscript (postscript continuous
-hexdumd style).
+hexdump style).
 Également connu sous le nom de « conversion brute » (plain hexdump style).
 .TP
 .IR \-r " | " \-revert

runtime/doc/xxd-fr.UTF-8.1

@@ -111,7 +111,7 @@ octets.
 .TP
 .IR \-p " | " \-ps " | " \-postscript " | " \-plain
 Produit une conversion continue dans le style Postscript (postscript continuous
-hexdumd style).
+hexdump style).
 Également connu sous le nom de « conversion brute » (plain hexdump style).
 .TP
 .IR \-r " | " \-revert

runtime/filetype.vim

@@ -1,7 +1,7 @@
 " Vim support file to detect file types
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2021 Oct 03
+" Last Change:	2021 Dec 14
 
 " Listen very carefully, I will say this only once
 if exists("did_load_filetypes")
@@ -123,7 +123,7 @@ au BufNewFile,BufRead *.aml			setf aml
 " APT config file
 au BufNewFile,BufRead apt.conf		       setf aptconf
 au BufNewFile,BufRead */.aptitude/config       setf aptconf
-au BufNewFile,BufRead */etc/apt/apt.conf.d/{[-_[:alnum:]]\+,[-_.[:alnum:]]\+.conf} setf aptconf
+" more generic pattern far down
 
 " Arch Inventory file
 au BufNewFile,BufRead .arch-inventory,=tagging-method	setf arch
@@ -260,7 +260,7 @@ au BufNewFile,BufRead *.lpc,*.ulpc		setf lpc
 au BufNewFile,BufRead calendar			setf calendar
 
 " C#
-au BufNewFile,BufRead *.cs			setf cs
+au BufNewFile,BufRead *.cs,*.csx		setf cs
 
 " CSDL
 au BufNewFile,BufRead *.csdl			setf csdl
@@ -490,6 +490,9 @@ au BufNewFile,BufRead dict.conf,.dictrc		setf dictconf
 " Dictd config
 au BufNewFile,BufRead dictd*.conf		setf dictdconf
 
+" DEP3 formatted patch files
+au BufNewFile,BufRead */debian/patches/*	call dist#ft#Dep3patch()
+
 " Diff files
 au BufNewFile,BufRead *.diff,*.rej		setf diff
 au BufNewFile,BufRead *.patch
@@ -617,6 +620,9 @@ autocmd BufRead,BufNewFile *.fnl		setf fennel
 " Fetchmail RC file
 au BufNewFile,BufRead .fetchmailrc		setf fetchmail
 
+" Fish shell
+au BufNewFile,BufRead *.fish			setf fish
+
 " FlexWiki - disabled, because it has side effects when a .wiki file
 " is not actually FlexWiki
 "au BufNewFile,BufRead *.wiki			setf flexwiki
@@ -629,7 +635,7 @@ au BufNewFile,BufRead auto.master		setf conf
 au BufNewFile,BufRead *.mas,*.master		setf master
 
 " Forth
-au BufNewFile,BufRead *.fs,*.ft,*.fth		setf forth
+au BufNewFile,BufRead *.ft,*.fth		setf forth
 
 " Reva Forth
 au BufNewFile,BufRead *.frt			setf reva
@@ -646,8 +652,14 @@ au BufNewFile,BufRead *.fsl			setf framescript
 " FStab
 au BufNewFile,BufRead fstab,mtab		setf fstab
 
+" F# or Forth
+au BufNewFile,BufRead *.fs			call dist#ft#FTfs()
+
+" F#
+au BufNewFile,BufRead *.fsi,*.fsx		setf fsharp
+
 " GDB command files
-au BufNewFile,BufRead .gdbinit			setf gdb
+au BufNewFile,BufRead .gdbinit,gdbinit		setf gdb
 
 " GDMO
 au BufNewFile,BufRead *.mo,*.gdmo		setf gdmo
@@ -781,6 +793,10 @@ au BufNewFile,BufRead *.hb			setf hb
 " Httest
 au BufNewFile,BufRead *.htt,*.htb		setf httest
 
+" i3 (and sway)
+au BufNewFile,BufRead */i3/config,*/sway/config		setf i3config
+au BufNewFile,BufRead */.i3/config,*/.sway/config	setf i3config
+
 " Icon
 au BufNewFile,BufRead *.icn			setf icon
 
@@ -1114,14 +1130,15 @@ au BufNewFile,BufRead *.msql			setf msql
 " Mysql
 au BufNewFile,BufRead *.mysql			setf mysql
 
-" Mutt setup files (must be before catch *.rc)
-au BufNewFile,BufRead */etc/Muttrc.d/*		call s:StarSetf('muttrc')
-
 " Tcl Shell RC file
 au BufNewFile,BufRead tclsh.rc			setf tcl
 
 " M$ Resource files
-au BufNewFile,BufRead *.rc,*.rch		setf rc
+" /etc/Muttrc.d/file.rc is muttrc
+au BufNewFile,BufRead *.rc,*.rch
+	\ if expand("<afile>") !~ "/etc/Muttrc.d/" |
+	\   setf rc |
+	\ endif
 
 " MuPAD source
 au BufRead,BufNewFile *.mu			setf mupad
@@ -1493,6 +1510,9 @@ au BufNewFile,BufRead robots.txt		setf robots
 " Rpcgen
 au BufNewFile,BufRead *.x			setf rpcgen
 
+" MikroTik RouterOS script
+au BufRead,BufNewFile *.rsc			setf routeros
+
 " reStructuredText Documentation Format
 au BufNewFile,BufRead *.rst			setf rst
 
@@ -1637,6 +1657,9 @@ au BufNewFile,BufRead .tcshrc,*.tcsh,tcsh.tcshrc,tcsh.login	call dist#ft#SetFile
 " (patterns ending in a start further below)
 au BufNewFile,BufRead .login,.cshrc,csh.cshrc,csh.login,csh.logout,*.csh,.alias  call dist#ft#CSH()
 
+" Zig
+au BufNewFile,BufRead *.zig			setf zig
+
 " Z-Shell script (patterns ending in a star further below)
 au BufNewFile,BufRead .zprofile,*/etc/zprofile,.zfbfmarks  setf zsh
 au BufNewFile,BufRead .zshrc,.zshenv,.zlogin,.zlogout,.zcompdump setf zsh
@@ -1723,6 +1746,9 @@ au BufNewFile,BufRead *.speedup,*.spdata,*.spd	setf spup
 " Slice
 au BufNewFile,BufRead *.ice			setf slice
 
+" Microsoft Visual Studio Solution
+au BufNewFile,BufRead *.sln			setf solution
+
 " Spice
 au BufNewFile,BufRead *.sp,*.spice		setf spice
 
@@ -1744,6 +1770,9 @@ au BufNewFile,BufRead *.sqlj			setf sqlj
 " SQR
 au BufNewFile,BufRead *.sqr,*.sqi		setf sqr
 
+" Squirrel
+au BufNewFile,BufRead *.nut			setf squirrel
+
 " OpenSSH configuration
 au BufNewFile,BufRead ssh_config,*/.ssh/config		setf sshconfig
 au BufNewFile,BufRead */etc/ssh/ssh_config.d/*.conf	setf sshconfig
@@ -2053,9 +2082,15 @@ au BufNewFile,BufRead *.xml			call dist#ft#FTxml()
 " XMI (holding UML models) is also XML
 au BufNewFile,BufRead *.xmi			setf xml
 
-" CSPROJ files are Visual Studio.NET's XML-based project config files
+" CSPROJ files are Visual Studio.NET's XML-based C# project config files
 au BufNewFile,BufRead *.csproj,*.csproj.user	setf xml
 
+" FSPROJ files are Visual Studio.NET's XML-based F# project config files
+au BufNewFile,BufRead *.fsproj,*.fsproj.user	setf xml
+
+" VBPROJ files are Visual Studio.NET's XML-based Visual Basic project config files
+au BufNewFile,BufRead *.vbproj,*.vbproj.user	setf xml
+
 " Qt Linguist translation source and Qt User Interface Files are XML
 " However, for .ts Typescript is more common.
 au BufNewFile,BufRead *.ui			setf xml
@@ -2141,6 +2176,12 @@ au BufNewFile,BufRead *
 au StdinReadPost * if !did_filetype() | runtime! scripts.vim | endif
 
 
+" Plain text files, needs to be far down to not override others.  This avoids
+" the "conf" type being used if there is a line starting with '#'.
+" But before patterns matching everything in a directory.
+au BufNewFile,BufRead *.text,README,LICENSE,COPYING,AUTHORS	setf text
+
+
 " Extra checks for when no filetype has been detected now.  Mostly used for
 " patterns that end in "*".  E.g., "zsh*" matches "zsh.vim", but that's a Vim
 " script file.
@@ -2155,6 +2196,9 @@ au BufNewFile,BufRead proftpd.conf*					call s:StarSetf('apachestyle')
 au BufNewFile,BufRead access.conf*,apache.conf*,apache2.conf*,httpd.conf*,srm.conf*	call s:StarSetf('apache')
 au BufNewFile,BufRead */etc/apache2/*.conf*,*/etc/apache2/conf.*/*,*/etc/apache2/mods-*/*,*/etc/apache2/sites-*/*,*/etc/httpd/conf.*/*,*/etc/httpd/mods-*/*,*/etc/httpd/sites-*/*,*/etc/httpd/conf.d/*.conf*		call s:StarSetf('apache')
 
+" APT config file
+au BufNewFile,BufRead */etc/apt/apt.conf.d/{[-_[:alnum:]]\+,[-_.[:alnum:]]\+.conf} call s:StarSetf('aptconf')
+
 " Asterisk config file
 au BufNewFile,BufRead *asterisk/*.conf*		call s:StarSetf('asterisk')
 au BufNewFile,BufRead *asterisk*/*voicemail.conf* call s:StarSetf('asteriskvm')
@@ -2256,6 +2300,9 @@ au BufNewFile,BufRead */etc/modutils/*
 	\|endif
 au BufNewFile,BufRead */etc/modprobe.*		call s:StarSetf('modconf')
 
+" Mutt setup files (must be before catch *.rc)
+au BufNewFile,BufRead */etc/Muttrc.d/*		call s:StarSetf('muttrc')
+
 " Mutt setup file
 au BufNewFile,BufRead .mutt{ng,}rc*,*/.mutt{ng,}/mutt{ng,}rc*	call s:StarSetf('muttrc')
 au BufNewFile,BufRead mutt{ng,}rc*,Mutt{ng,}rc*		call s:StarSetf('muttrc')
@@ -2301,6 +2348,9 @@ au BufNewFile,BufRead .bashrc*,.bash[_-]profile*,.bash[_-]logout*,.bash[_-]alias
 au BufNewFile,BufRead .kshrc* call dist#ft#SetFileTypeSH("ksh")
 au BufNewFile,BufRead .profile* call dist#ft#SetFileTypeSH(getline(1))
 
+" Sudoers
+au BufNewFile,BufRead */etc/sudoers.d/*		call s:StarSetf('sudoers')
+
 " tcsh scripts ending in a star
 au BufNewFile,BufRead .tcshrc*	call dist#ft#SetFileTypeShell("tcsh")
 
@@ -2345,10 +2395,6 @@ au BufNewFile,BufRead .zsh*,.zlog*,.zcompdump*  call s:StarSetf('zsh')
 au BufNewFile,BufRead zsh*,zlog*		call s:StarSetf('zsh')
 
 
-" Plain text files, needs to be far down to not override others.  This avoids
-" the "conf" type being used if there is a line starting with '#'.
-au BufNewFile,BufRead *.text,README		setf text
-
 " Help files match *.txt but should have a last line that is a modeline.
 au BufNewFile,BufRead *.txt
 	\  if getline('$') !~ 'vim:.*ft=help'

runtime/ftplugin/aap.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:	Aap recipe
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2013 Apr 05
+" Last Change:	2021 Nov 14
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -11,8 +11,9 @@ endif
 " Don't load another plugin for this buffer
 let b:did_ftplugin = 1
 
-" Reset 'formatoptions', 'comments' and 'expandtab' to undo this plugin.
-let b:undo_ftplugin = "setl fo< com< et<"
+" Reset 'formatoptions', 'comments', 'commentstring' and 'expandtab' to undo
+" this plugin.
+let b:undo_ftplugin = "setl fo< com< cms< et<"
 
 " Set 'formatoptions' to break comment lines but not other lines,
 " and insert the comment leader when hitting <CR> or using "o".
@@ -20,6 +21,12 @@ setlocal fo-=t fo+=croql
 
 " Set 'comments' to format dashed lists in comments.
 setlocal comments=s:#\ -,m:#\ \ ,e:#,n:#,fb:-
+setlocal commentstring=#\ %s
 
 " Expand tabs to spaces to avoid trouble.
 setlocal expandtab
+
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let b:browsefilter = "Aap Recipe Files (*.aap)\t*.aap\nAll Files (*.*)\t*.*\n"
+  let b:undo_ftplugin ..= " | unlet! b:browsefilter"
+endif

runtime/ftplugin/clojure.vim

@@ -1,11 +1,11 @@
 " Vim filetype plugin file
 " Language:           Clojure
-" Maintainer:         Alex Vear <av@axvr.io>
+" Maintainer:         Alex Vear <alex@vear.uk>
 " Former Maintainers: Sung Pae <self@sungpae.com>
 "                     Meikel Brandmeyer <mb@kotka.de>
 " URL:                https://github.com/clojure-vim/clojure.vim
 " License:            Vim (see :h license)
-" Last Change:        2021-02-13
+" Last Change:        2021-10-26
 
 if exists("b:did_ftplugin")
 	finish
@@ -17,7 +17,7 @@ set cpo&vim
 
 let b:undo_ftplugin = 'setlocal iskeyword< define< formatoptions< comments< commentstring< lispwords<'
 
-setlocal iskeyword+=?,-,*,!,+,/,=,<,>,.,:,$
+setlocal iskeyword+=?,-,*,!,+,/,=,<,>,.,:,$,%,&,\|
 
 " There will be false positives, but this is better than missing the whole set
 " of user-defined def* definitions.
@@ -43,7 +43,7 @@ setlocal commentstring=;\ %s
 " specially and hence are not indented specially.
 "
 " -*- LISPWORDS -*-
-" Generated from https://github.com/clojure-vim/clojure.vim/blob/f8594e7030cdfb0b7990ac92953c77a08a7220f0/clj/src/vim_clojure_static/generate.clj
+" Generated from https://github.com/clojure-vim/clojure.vim/blob/62b215f079ce0f3834fd295c7a7f6bd8cc54bcc3/clj/src/vim_clojure_static/generate.clj
 setlocal lispwords=as->,binding,bound-fn,case,catch,cond->,cond->>,condp,def,definline,definterface,defmacro,defmethod,defmulti,defn,defn-,defonce,defprotocol,defrecord,defstruct,deftest,deftest-,deftype,doseq,dotimes,doto,extend,extend-protocol,extend-type,fn,for,if,if-let,if-not,if-some,let,letfn,locking,loop,ns,proxy,reify,set-test,testing,when,when-first,when-let,when-not,when-some,while,with-bindings,with-in-str,with-local-vars,with-open,with-precision,with-redefs,with-redefs-fn,with-test
 
 " Provide insert mode completions for special forms and clojure.core. As
@@ -64,8 +64,8 @@ if exists('loaded_matchit')
 	let b:undo_ftplugin .= ' | unlet! b:match_words b:match_skip'
 endif
 
-" Win32 can filter files in the browse dialog
-if has("gui_win32") && !exists("b:browsefilter")
+" Filter files in the browse dialog
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
 	let b:browsefilter = "Clojure Source Files (*.clj)\t*.clj\n" .
 	                   \ "ClojureScript Source Files (*.cljs)\t*.cljs\n" .
 	                   \ "Java Source Files (*.java)\t*.java\n" .

runtime/ftplugin/diff.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:	Diff
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2020 Jul 18
+" Last Change:	2021 Nov 14
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -9,10 +9,15 @@ if exists("b:did_ftplugin")
 endif
 let b:did_ftplugin = 1
 
-let b:undo_ftplugin = "setl modeline<"
+let b:undo_ftplugin = "setl modeline< commentstring<"
 
 " Don't use modelines in a diff, they apply to the diffed file
 setlocal nomodeline
 
 " If there are comments they start with #
-let &commentstring = "# %s"
+let &l:commentstring = "# %s"
+
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let b:browsefilter = "Diff Files (*.diff)\t*.diff\nPatch Files (*.patch)\t*.h\nAll Files (*.*)\t*.*\n"
+  let b:undo_ftplugin ..= " | unlet! b:browsefilter"
+endif

runtime/ftplugin/i3config.vim

@@ -0,0 +1,13 @@
+" Vim filetype plugin file
+" Language: i3 config file
+" Original Author: Mohamed Boughaba <mohamed dot bgb at gmail dot com>
+" Maintainer: Quentin Hibon
+" Version: 0.4
+" Last Change: 2021 Dec 14
+
+if exists("b:did_ftplugin") | finish | endif
+let b:did_ftplugin = 1
+
+let b:undo_ftplugin = "setlocal cms<"
+
+setlocal commentstring=#\ %s

runtime/ftplugin/indent.vim

@@ -1,7 +1,8 @@
 " Vim filetype plugin file
-" Language:             indent(1) configuration file
-" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2008-07-09
+" Language:		indent(1) configuration file
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
+" Latest Revision:	2008-07-09
 
 if exists("b:did_ftplugin")
   finish

runtime/ftplugin/jsonc.vim

@@ -4,7 +4,7 @@
 " Acknowledgement:  Based off of vim-jsonc maintained by Kevin Locke <kevin@kevinlocke.name>
 "                   https://github.com/kevinoid/vim-jsonc
 " License:          MIT
-" Last Change:      2021-07-01
+" Last Change:      2021 Nov 22
 
 runtime! ftplugin/json.vim
 
@@ -14,14 +14,8 @@ else
   let b:did_ftplugin_jsonc = 1
 endif
 
-" A list of commands that undo buffer local changes made below.
-let s:undo_ftplugin = []
-
 " Set comment (formatting) related options. {{{1
 setlocal commentstring=//%s comments=sO:*\ -,mO:*\ \ ,exO:*/,s1:/*,mb:*,ex:*/,://
-call add(s:undo_ftplugin, 'commentstring< comments<')
 
 " Let Vim know how to disable the plug-in.
-call map(s:undo_ftplugin, "'execute ' . string(v:val)")
-let b:undo_ftplugin = join(s:undo_ftplugin, ' | ')
-unlet s:undo_ftplugin
+let b:undo_ftplugin = 'setlocal commentstring< comments<'

runtime/ftplugin/lua.vim

@@ -1,7 +1,8 @@
 " Vim filetype plugin file.
-" Language:	Lua 4.0+
-" Maintainer:	Max Ischenko <mfi@ukr.net>
-" Last Change:	2012 Mar 07
+" Language:	        Lua
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Max Ischenko <mfi@ukr.net>
+" Last Change:	        2021 Nov 15
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -16,27 +17,30 @@ set cpo&vim
 
 " Set 'formatoptions' to break comment lines but not other lines, and insert
 " the comment leader when hitting <CR> or using "o".
-setlocal fo-=t fo+=croql
+setlocal formatoptions-=t formatoptions+=croql
 
-setlocal com=:--
-setlocal cms=--%s
+setlocal comments=:--
+setlocal commentstring=--%s
 setlocal suffixesadd=.lua
 
+let b:undo_ftplugin = "setlocal fo< com< cms< sua<"
 
-" The following lines enable the macros/matchit.vim plugin for
-" extended matching with the % key.
-if exists("loaded_matchit")
-
+if exists("loaded_matchit") && !exists("b:match_words")
   let b:match_ignorecase = 0
   let b:match_words =
-    \ '\<\%(do\|function\|if\)\>:' .
-    \ '\<\%(return\|else\|elseif\)\>:' .
-    \ '\<end\>,' .
-    \ '\<repeat\>:\<until\>'
+        \ '\<\%(do\|function\|if\)\>:' .
+        \ '\<\%(return\|else\|elseif\)\>:' .
+        \ '\<end\>,' .
+        \ '\<repeat\>:\<until\>,' .
+        \ '\%(--\)\=\[\(=*\)\[:]\1]'
+  let b:undo_ftplugin .= " | unlet! b:match_words b:match_ignorecase"
+endif
 
-endif " exists("loaded_matchit")
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let b:browsefilter = "Lua Source Files (*.lua)\t*.lua\n" .
+	\              "All Files (*.*)\t*.*\n"
+  let b:undo_ftplugin .= " | unlet! b:browsefilter"
+endif
 
 let &cpo = s:cpo_save
 unlet s:cpo_save
-
-let b:undo_ftplugin = "setlocal fo< com< cms< suffixesadd<"

runtime/ftplugin/mail.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:	Mail
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2012 Nov 20
+" Last Change:	2021 Oct 23
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -26,6 +26,14 @@ setlocal fo+=tcql
 " Add n:> to 'comments, in case it was removed elsewhere
 setlocal comments+=n:>
 
+" .eml files are universally formatted with DOS line-endings, per RFC5322.
+" If the file was not DOS the it will be marked as changed, which is probably
+" a good thing.
+if expand('%:e') ==? 'eml'
+  let b:undo_ftplugin ..= " fileformat=" .. &fileformat
+  setlocal fileformat=dos
+endif
+
 " Add mappings, unless the user doesn't want this.
 if !exists("no_plugin_maps") && !exists("no_mail_maps")
   " Quote text by inserting "> "

runtime/ftplugin/meson.vim

@@ -12,9 +12,28 @@ set cpo&vim
 
 setlocal commentstring=#\ %s
 setlocal comments=:#
+setlocal formatoptions+=croql formatoptions-=t
 
-setlocal shiftwidth=2
-setlocal softtabstop=2
+let b:undo_ftplugin = "setl com< cms< fo<"
+
+if get(g:, "meson_recommended_style", 1)
+  setlocal expandtab
+  setlocal shiftwidth=2
+  setlocal softtabstop=2
+  let b:undo_ftplugin .= " | setl et< sts< sw<"
+endif
+
+if exists("loaded_matchit") && !exists("b:match_words")
+  let b:match_words = '\<if\>:\<elif\>:\<else\>:\<endif\>,' .
+	\             '\<foreach\>:\<break\>:\<continue\>:\<endforeach\>'
+  let b:undo_ftplugin .= " | unlet! b:match_words"
+endif
+
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let b:browsefilter = "Meson Build Files (meson.build)\tmeson.build\n" .
+	\	       "All Files (*.*)\t*.*\n"
+  let b:undo_ftplugin .= " | unlet! b:browsefilter"
+endif
 
 let &cpo = s:keepcpo
 unlet s:keepcpo

runtime/ftplugin/routeros.vim

@@ -0,0 +1,29 @@
+" Vim filetype plugin file
+" Language:	MikroTik RouterOS Script
+" Maintainer:	zainin <z@wintr.dev>
+" Last Change:	2021 Nov 14
+
+if exists("b:did_ftplugin")
+  finish
+endif
+let b:did_ftplugin = 1
+
+let s:save_cpo = &cpo
+set cpo-=C
+
+setlocal comments=:#
+setlocal commentstring=#\ %s
+setlocal formatoptions-=t formatoptions+=croql
+
+let b:undo_ftplugin = "setlocal com< cms< fo<"
+
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let b:browsefilter = "RouterOS Script Files (*.rsc)\t*.rsc\n" ..
+	\	       "All Files (*.*)\t*.*\n"
+  let b:undo_ftplugin ..= " | unlet! b:browsefilter"
+endif
+
+let &cpo = s:save_cpo
+unlet! s:save_cpo
+
+" vim: nowrap sw=2 sts=2 ts=8 noet:

runtime/ftplugin/solution.vim

@@ -0,0 +1,37 @@
+" Vim filetype plugin file
+" Language:	Microsoft Visual Studio Solution
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2021 Dec 15
+
+if exists("b:did_ftplugin")
+  finish
+endif
+let b:did_ftplugin = 1
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+setlocal comments=:#
+setlocal commentstring=#\ %s
+
+let b:undo_ftplugin = "setl com< cms<"
+
+if exists("loaded_matchit") && !exists("b:match_words")
+  let b:match_words =
+	\ '\<Project\>:\<EndProject\>,' ..
+	\ '\<ProjectSection\>:\<EndProjectSection\>,' ..
+	\ '\<Global\>:\<EndGlobal\>,' ..
+	\ '\<GlobalSection\>:\<EndGlobalSection\>'
+  let b:undo_ftplugin ..= " | unlet! b:match_words"
+endif
+
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let b:browsefilter = "Microsoft Visual Studio Solution Files\t*.sln\n" ..
+	\	       "All Files (*.*)\t*.*\n"
+  let b:undo_ftplugin ..= " | unlet! b:browsefilter"
+endif
+
+let &cpo = s:cpo_save
+unlet s:cpo_save
+
+" vim: nowrap sw=2 sts=2 ts=8 noet:

runtime/ftplugin/spec.vim

@@ -18,8 +18,8 @@ if !exists("no_plugin_maps") && !exists("no_spec_maps")
 	endif
 endif
 
-if !hasmapto("call SpecChangelog(\"\")<CR>")
-       noremap <buffer> <unique> <script> <Plug>SpecChangelog :call SpecChangelog("")<CR>
+if !hasmapto("call <SID>SpecChangelog(\"\")<CR>")
+       noremap <buffer> <unique> <script> <Plug>SpecChangelog :call <SID>SpecChangelog("")<CR>
 endif
 
 if !exists("*s:GetRelVer")

runtime/ftplugin/vb.vim

@@ -1,44 +1,70 @@
 " Vim filetype plugin file
-" Language:	VisualBasic (ft=vb)
-" Maintainer:	Johannes Zellner <johannes@zellner.org>
-" Last Change:	Thu, 22 Nov 2001 12:56:14 W. Europe Standard Time
+" Language:		Visual Basic (ft=vb)
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Johannes Zellner <johannes@zellner.org>
+" Last Change:		2021 Nov 17
 
-if exists("b:did_ftplugin") | finish | endif
+if exists("b:did_ftplugin")
+  finish
+endif
 let b:did_ftplugin = 1
 
-setlocal com=sr:'\ -,mb:'\ \ ,el:'\ \ ,:'
+let s:cpo_save = &cpo
+set cpo&vim
+
+setlocal comments=sr:'\ -,mb:'\ \ ,el:'\ \ ,:'
+setlocal commentstring='\ %s
+setlocal formatoptions-=t formatoptions+=croql
+
+let b:undo_ftplugin = "setlocal com< cms< fo<"
 
 " we need this wrapper, as call doesn't allow a count
-fun! <SID>VbSearch(pattern, flags)
+function! s:VbSearch(pattern, flags)
     let cnt = v:count1
     while cnt > 0
 	call search(a:pattern, a:flags)
 	let cnt = cnt - 1
     endwhile
-endfun
+endfunction
 
-let s:cpo_save = &cpo
-set cpo&vim
+if !exists("no_plugin_maps") && !exists("no_vb_maps")
+  nnoremap <buffer> <silent> [[ <Cmd>call <SID>VbSearch('^\s*\%(\%(private\<Bar>public\)\s\+\)\=\%(function\<Bar>sub\)', 'sbW')<CR>
+  vnoremap <buffer> <silent> [[ <Cmd>call <SID>VbSearch('^\s*\%(\%(private\<Bar>public\)\s\+\)\=\%(function\<Bar>sub\)', 'sbW')<CR>
+  nnoremap <buffer> <silent> ]] <Cmd>call <SID>VbSearch('^\s*\%(\%(private\<Bar>public\)\s\+\)\=\%(function\<Bar>sub\)', 'sW')<CR>
+  vnoremap <buffer> <silent> ]] <Cmd>call <SID>VbSearch('^\s*\%(\%(private\<Bar>public\)\s\+\)\=\%(function\<Bar>sub\)', 'sW')<CR>
+  nnoremap <buffer> <silent> [] <Cmd>call <SID>VbSearch('^\s*end\s\+\%(function\<Bar>sub\)', 'sbW')<CR>
+  vnoremap <buffer> <silent> [] <Cmd>call <SID>VbSearch('^\s*end\s\+\%(function\<Bar>sub\)', 'sbW')<CR>
+  nnoremap <buffer> <silent> ][ <Cmd>call <SID>VbSearch('^\s*end\s\+\%(function\<Bar>sub\)', 'sW')<CR>
+  vnoremap <buffer> <silent> ][ <Cmd>call <SID>VbSearch('^\s*end\s\+\%(function\<Bar>sub\)', 'sW')<CR>
+  let b:undo_ftplugin .= " | sil! exe 'nunmap <buffer> [[' | sil! exe 'vunmap <buffer> [['" .
+	\		 " | sil! exe 'nunmap <buffer> ]]' | sil! exe 'vunmap <buffer> ]]'" .
+	\		 " | sil! exe 'nunmap <buffer> []' | sil! exe 'vunmap <buffer> []'" .
+	\		 " | sil! exe 'nunmap <buffer> ][' | sil! exe 'vunmap <buffer> ]['"
+endif
 
-" NOTE the double escaping \\|
-nnoremap <buffer> <silent> [[ :call <SID>VbSearch('^\s*\(\(private\|public\)\s\+\)\=\(function\\|sub\)', 'bW')<cr>
-nnoremap <buffer> <silent> ]] :call <SID>VbSearch('^\s*\(\(private\|public\)\s\+\)\=\(function\\|sub\)', 'W')<cr>
-nnoremap <buffer> <silent> [] :call <SID>VbSearch('^\s*\<end\>\s\+\(function\\|sub\)', 'bW')<cr>
-nnoremap <buffer> <silent> ][ :call <SID>VbSearch('^\s*\<end\>\s\+\(function\\|sub\)', 'W')<cr>
+" TODO: line start anchors are almost certainly overly restrictive - allow
+" after statement separators.  Even in QuickBasic only block IF statements
+" were required to be at the start of a line.
+if exists("loaded_matchit") && !exists("b:match_words")
+  let b:match_ignorecase = 1
+  let b:match_words =
+	\ '\%(^\s*\)\@<=\<if\>.*\<then\>\s*\%($\|''\):\%(^\s*\)\@<=\<else\>:\%(^\s*\)\@<=\<elseif\>:\%(^\s*\)\@<=\<end\>\s\+\<if\>,' .
+	\ '\%(^\s*\)\@<=\<for\>:\%(^\s*\)\@<=\<next\>,' .
+	\ '\%(^\s*\)\@<=\<while\>:\%(^\s*\)\@<=\<wend\>,' .
+	\ '\%(^\s*\)\@<=\<do\>:\%(^\s*\)\@<=\<loop\>\s\+\<while\>,' .
+	\ '\%(^\s*\)\@<=\<select\>\s\+\<case\>:\%(^\s*\)\@<=\<case\>:\%(^\s*\)\@<=\<end\>\s\+\<select\>,' .
+	\ '\%(^\s*\)\@<=\<enum\>:\%(^\s*\)\@<=\<end\>\s\<enum\>,' .
+	\ '\%(^\s*\)\@<=\<with\>:\%(^\s*\)\@<=\<end\>\s\<with\>,' .
+	\ '\%(^\s*\)\@<=\%(\<\%(private\|public\)\>\s\+\)\=\<function\>\s\+\([^ \t(]\+\):\%(^\s*\)\@<=\<\1\>\s*=:\%(^\s*\)\@<=\<end\>\s\+\<function\>,' .
+	\ '\%(^\s*\)\@<=\%(\<\%(private\|public\)\>\s\+\)\=\<sub\>\s\+:\%(^\s*\)\@<=\<end\>\s\+\<sub\>'
+  let b:undo_ftplugin .= " | unlet! b:match_words b:match_ignorecase"
+endif
 
-" matchit support
-if exists("loaded_matchit")
-    let b:match_ignorecase=1
-    let b:match_words=
-    \ '\%(^\s*\)\@<=\<if\>.*\<then\>\s*$:\%(^\s*\)\@<=\<else\>:\%(^\s*\)\@<=\<elseif\>:\%(^\s*\)\@<=\<end\>\s\+\<if\>,' .
-    \ '\%(^\s*\)\@<=\<for\>:\%(^\s*\)\@<=\<next\>,' .
-    \ '\%(^\s*\)\@<=\<while\>:\%(^\s*\)\@<=\<wend\>,' .
-    \ '\%(^\s*\)\@<=\<do\>:\%(^\s*\)\@<=\<loop\>\s\+\<while\>,' .
-    \ '\%(^\s*\)\@<=\<select\>\s\+\<case\>:\%(^\s*\)\@<=\<case\>:\%(^\s*\)\@<=\<end\>\s\+\<select\>,' .
-    \ '\%(^\s*\)\@<=\<enum\>:\%(^\s*\)\@<=\<end\>\s\<enum\>,' .
-    \ '\%(^\s*\)\@<=\<with\>:\%(^\s*\)\@<=\<end\>\s\<with\>,' .
-    \ '\%(^\s*\)\@<=\%(\<\%(private\|public\)\>\s\+\)\=\<function\>\s\+\([^ \t(]\+\):\%(^\s*\)\@<=\<\1\>\s*=:\%(^\s*\)\@<=\<end\>\s\+\<function\>,' .
-    \ '\%(^\s*\)\@<=\%(\<\%(private\|public\)\>\s\+\)\=\<sub\>\s\+:\%(^\s*\)\@<=\<end\>\s\+\<sub\>'
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let b:browsefilter = "Visual Basic Source Files (*.bas)\t*.bas\n" .
+	\	       "Visual Basic Form Files (*.frm)\t*.frm\n" .
+	\	       "All Files (*.*)\t*.*\n"
+  let b:undo_ftplugin .= " | unlet! b:browsefilter"
 endif
 
 let &cpo = s:cpo_save

runtime/ftplugin/zimbu.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:	Zimbu
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2017 Dec 05
+" Last Change:	2021 Nov 12
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -34,9 +34,11 @@ setlocal errorformat^=%f\ line\ %l\ col\ %c:\ %m,ERROR:\ %m
 
 " When the matchit plugin is loaded, this makes the % command skip parens and
 " braces in comments.
-let b:match_words = '\(^\s*\)\@<=\(MODULE\|CLASS\|INTERFACE\|BITS\|ENUM\|SHARED\|FUNC\|REPLACE\|DEFINE\|PROC\|EQUAL\|MAIN\|IF\|GENERATE_IF\|WHILE\|REPEAT\|WITH\|DO\|FOR\|SWITCH\|TRY\)\>\|{\s*$:\(^\s*\)\@<=\(ELSE\|ELSEIF\|GENERATE_ELSE\|GENERATE_ELSEIF\|CATCH\|FINALLY\)\>:\(^\s*\)\@<=\(}\|\<UNTIL\>\)'
-
-let b:match_skip = 's:comment\|string\|zimbuchar'
+if exists("loaded_matchit") && !exists("b:match_words")
+  let b:match_words = '\(^\s*\)\@<=\(MODULE\|CLASS\|INTERFACE\|BITS\|ENUM\|SHARED\|FUNC\|REPLACE\|DEFINE\|PROC\|EQUAL\|MAIN\|IF\|GENERATE_IF\|WHILE\|REPEAT\|WITH\|DO\|FOR\|SWITCH\|TRY\)\>\|{\s*$:\(^\s*\)\@<=\(ELSE\|ELSEIF\|GENERATE_ELSE\|GENERATE_ELSEIF\|CATCH\|FINALLY\)\>:\(^\s*\)\@<=\(}\|\<UNTIL\>\)'
+  let b:match_skip = 's:comment\|string\|zimbuchar'
+  let b:undo_ftplugin ..= " | unlet! b:match_words b:match_skip"
+endif
 
 setlocal tw=78
 setlocal et sts=2 sw=2
@@ -135,9 +137,60 @@ iabbr <buffer> <expr> until GCUpperSpace("until")
 iabbr <buffer> <expr> while GCUpperSpace("while")
 iabbr <buffer> <expr> repeat GCUpper("repeat")
 
+let b:undo_ftplugin ..=
+      \ " | iunabbr <buffer> alias" ..
+      \ " | iunabbr <buffer> arg" ..
+      \ " | iunabbr <buffer> break" ..
+      \ " | iunabbr <buffer> case" ..
+      \ " | iunabbr <buffer> catch" ..
+      \ " | iunabbr <buffer> check" ..
+      \ " | iunabbr <buffer> class" ..
+      \ " | iunabbr <buffer> interface" ..
+      \ " | iunabbr <buffer> implements" ..
+      \ " | iunabbr <buffer> shared" ..
+      \ " | iunabbr <buffer> continue" ..
+      \ " | iunabbr <buffer> default" ..
+      \ " | iunabbr <buffer> extends" ..
+      \ " | iunabbr <buffer> do" ..
+      \ " | iunabbr <buffer> else" ..
+      \ " | iunabbr <buffer> elseif" ..
+      \ " | iunabbr <buffer> enum" ..
+      \ " | iunabbr <buffer> exit" ..
+      \ " | iunabbr <buffer> false" ..
+      \ " | iunabbr <buffer> fail" ..
+      \ " | iunabbr <buffer> finally" ..
+      \ " | iunabbr <buffer> for" ..
+      \ " | iunabbr <buffer> func" ..
+      \ " | iunabbr <buffer> if" ..
+      \ " | iunabbr <buffer> import" ..
+      \ " | iunabbr <buffer> in" ..
+      \ " | iunabbr <buffer> io" ..
+      \ " | iunabbr <buffer> main" ..
+      \ " | iunabbr <buffer> module" ..
+      \ " | iunabbr <buffer> new" ..
+      \ " | iunabbr <buffer> nil" ..
+      \ " | iunabbr <buffer> ok" ..
+      \ " | iunabbr <buffer> proc" ..
+      \ " | iunabbr <buffer> proceed" ..
+      \ " | iunabbr <buffer> return" ..
+      \ " | iunabbr <buffer> step" ..
+      \ " | iunabbr <buffer> switch" ..
+      \ " | iunabbr <buffer> sys" ..
+      \ " | iunabbr <buffer> this" ..
+      \ " | iunabbr <buffer> throw" ..
+      \ " | iunabbr <buffer> try" ..
+      \ " | iunabbr <buffer> to" ..
+      \ " | iunabbr <buffer> true" ..
+      \ " | iunabbr <buffer> until" ..
+      \ " | iunabbr <buffer> while" ..
+      \ " | iunabbr <buffer> repeat"
+
 if !exists("no_plugin_maps") && !exists("no_zimbu_maps")
   nnoremap <silent> <buffer> [[ m`:call ZimbuGoStartBlock()<CR>
   nnoremap <silent> <buffer> ]] m`:call ZimbuGoEndBlock()<CR>
+  let b:undo_ftplugin ..=
+	\ " | silent! exe 'nunmap <buffer> [['" ..
+	\ " | silent! exe 'nunmap <buffer> ]]'"
 endif
 
 " Using a function makes sure the search pattern is restored

runtime/indent/clojure.vim

@@ -1,11 +1,11 @@
 " Vim indent file
 " Language:           Clojure
-" Maintainer:         Alex Vear <av@axvr.io>
+" Maintainer:         Alex Vear <alex@vear.uk>
 " Former Maintainers: Sung Pae <self@sungpae.com>
 "                     Meikel Brandmeyer <mb@kotka.de>
 " URL:                https://github.com/clojure-vim/clojure.vim
 " License:            Vim (see :h license)
-" Last Change:        2021-02-13
+" Last Change:        2021-10-26
 
 if exists("b:did_indent")
 	finish
@@ -24,7 +24,7 @@ setlocal indentkeys=!,o,O
 if exists("*searchpairpos")
 
 	if !exists('g:clojure_maxlines')
-		let g:clojure_maxlines = 100
+		let g:clojure_maxlines = 300
 	endif
 
 	if !exists('g:clojure_fuzzy_indent')
@@ -71,14 +71,10 @@ if exists("*searchpairpos")
 		return s:current_char() =~# '\v[\(\)\[\]\{\}]' && !s:ignored_region()
 	endfunction
 
-	" Returns 1 if string matches a pattern in 'patterns', which may be a
-	" list of patterns, or a comma-delimited string of implicitly anchored
-	" patterns.
+	" Returns 1 if string matches a pattern in 'patterns', which should be
+	" a list of patterns.
 	function! s:match_one(patterns, string)
-		let list = type(a:patterns) == type([])
-		           \ ? a:patterns
-		           \ : map(split(a:patterns, ','), '"^" . v:val . "$"')
-		for pat in list
+		for pat in a:patterns
 			if a:string =~# pat | return 1 | endif
 		endfor
 	endfunction
@@ -215,9 +211,10 @@ if exists("*searchpairpos")
 	endfunction
 
 	" Check if form is a reader conditional, that is, it is prefixed by #?
-	" or @#?
+	" or #?@
 	function! s:is_reader_conditional_special_case(position)
 		return getline(a:position[0])[a:position[1] - 3 : a:position[1] - 2] == "#?"
+			\|| getline(a:position[0])[a:position[1] - 4 : a:position[1] - 2] == "#?@"
 	endfunction
 
 	" Returns 1 for opening brackets, -1 for _anything else_.

runtime/indent/meson.vim

@@ -20,6 +20,8 @@ setlocal autoindent	" indentexpr isn't much help otherwise
 setlocal indentexpr=GetMesonIndent(v:lnum)
 setlocal indentkeys+==elif,=else,=endforeach,=endif,0)
 
+let b:undo_indent = "setl ai< inde< indk< lisp<"
+
 " Only define the function once.
 if exists("*GetMesonIndent")
   finish

runtime/indent/vim.vim

@@ -1,7 +1,7 @@
 " Vim indent file
 " Language:	Vim script
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2021 Apr 18
+" Last Change:	2021 Nov 27
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")
@@ -12,6 +12,7 @@ let b:did_indent = 1
 setlocal indentexpr=GetVimIndent()
 setlocal indentkeys+==end,=},=else,=cat,=finall,=END,0\\,0=\"\\\ 
 setlocal indentkeys-=0#
+setlocal indentkeys-=:
 
 let b:undo_indent = "setl indentkeys< indentexpr<"
 
@@ -107,7 +108,7 @@ function GetVimIndentIntern()
       if i >= 0
 	let ind += shiftwidth()
 	if strpart(prev_text, i, 1) == '|' && has('syntax_items')
-	      \ && synIDattr(synID(lnum, i, 1), "name") =~ '\(Comment\|String\)$'
+	      \ && synIDattr(synID(lnum, i, 1), "name") =~ '\(Comment\|String\|PatSep\)$'
 	  let ind -= shiftwidth()
 	endif
       endif

runtime/optwin.vim

@@ -1,7 +1,7 @@
 " These commands create the option window.
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2021 Oct 17
+" Last Change:	2021 Dec 12
 
 " If there already is an option window, jump to that one.
 let buf = bufnr('option-window')
@@ -260,6 +260,8 @@ call <SID>OptionG("sect", &sect)
 call <SID>AddOption("path", gettext("list of directory names used for file searching"))
 call append("$", "\t" .. s:global_or_local)
 call <SID>OptionG("pa", &pa)
+call <SID>AddOption("cdhome", gettext(":cd without argument goes to the home directory"))
+call <SID>BinOptionG("cdh", &cdh)
 call <SID>AddOption("cdpath", gettext("list of directory names used for :cd"))
 call <SID>OptionG("cd", &cd)
 if exists("+autochdir")
@@ -652,7 +654,7 @@ if has("gui")
     endif
     call <SID>AddOption("guiheadroom", gettext("room (in pixels) left above/below the window"))
     call append("$", " \tset ghr=" . &ghr)
-    call <SID>AddOption("guiligatures", gettext("list of ASCII characters that can be combined into complesshapes"))
+    call <SID>AddOption("guiligatures", gettext("list of ASCII characters that can be combined into complex shapes"))
     call <SID>OptionG("gli", &gli)
   endif
   if has("directx")

runtime/pack/dist/opt/matchit/doc/matchit.txt

@@ -1,10 +1,10 @@
-*matchit.txt*   Extended "%" matching
+*matchit.txt*	Extended "%" matching
 
 For instructions on installing this file, type
 	`:help matchit-install`
 inside Vim.
 
-For Vim version 8.1.  Last change:  2021 May 17
+For Vim version 8.1.  Last change:  2021 Nov 13
 
 
 		  VIM REFERENCE MANUAL    by Benji Fisher et al

runtime/pack/dist/opt/termdebug/plugin/termdebug.vim

@@ -2,7 +2,7 @@
 "
 " Author: Bram Moolenaar
 " Copyright: Vim license applies, see ":help license"
-" Last Change: 2021 Aug 23
+" Last Change: 2021 Dec 16
 "
 " WORK IN PROGRESS - Only the basics work
 " Note: On MS-Windows you need a recent version of gdb.  The one included with
@@ -96,6 +96,7 @@ endfunc
 
 call s:Highlight(1, '', &background)
 hi default debugBreakpoint term=reverse ctermbg=red guibg=red
+hi default debugBreakpointDisabled term=reverse ctermbg=gray guibg=gray
 
 func s:StartDebug(bang, ...)
   " First argument is the command to debug, second core file or process ID.
@@ -229,14 +230,28 @@ func s:StartDebug_term(dict)
   endif
   let commpty = job_info(term_getjob(s:commbuf))['tty_out']
 
-  " Open a terminal window to run the debugger.
-  " Add -quiet to avoid the intro message causing a hit-enter prompt.
   let gdb_args = get(a:dict, 'gdb_args', [])
   let proc_args = get(a:dict, 'proc_args', [])
 
-  let cmd = [g:termdebugger, '-quiet', '-tty', pty, '--eval-command', 'echo startupdone\n'] + gdb_args
-  call ch_log('executing "' . join(cmd) . '"')
-  let s:gdbbuf = term_start(cmd, {
+  let gdb_cmd = [g:termdebugger]
+  " Add -quiet to avoid the intro message causing a hit-enter prompt.
+  let gdb_cmd += ['-quiet']
+  " Disable pagination, it causes everything to stop at the gdb
+  let gdb_cmd += ['-iex', 'set pagination off']
+  " Interpret commands while the target is running.  This should usually only
+  " be exec-interrupt, since many commands don't work properly while the
+  " target is running (so execute during startup).
+  let gdb_cmd += ['-iex', 'set mi-async on']
+  " Open a terminal window to run the debugger.
+  let gdb_cmd += ['-tty', pty]
+  " Command executed _after_ startup is done, provides us with the necessary feedback
+  let gdb_cmd += ['-ex', 'echo startupdone\n']
+
+  " Adding arguments requested by the user
+  let gdb_cmd += gdb_args
+
+  call ch_log('executing "' . join(gdb_cmd) . '"')
+  let s:gdbbuf = term_start(gdb_cmd, {
 	\ 'term_finish': 'close',
 	\ })
   if s:gdbbuf == 0
@@ -255,8 +270,8 @@ func s:StartDebug_term(dict)
 
     for lnum in range(1, 200)
       if term_getline(s:gdbbuf, lnum) =~ 'startupdone'
-	let try_count = 9999
-	break
+        let try_count = 9999
+        break
       endif
     endfor
     let try_count += 1
@@ -269,11 +284,12 @@ func s:StartDebug_term(dict)
 
   " Set arguments to be run.
   if len(proc_args)
-    call term_sendkeys(s:gdbbuf, 'set args ' . join(proc_args) . "\r")
+    call term_sendkeys(s:gdbbuf, 'server set args ' . join(proc_args) . "\r")
   endif
 
-  " Connect gdb to the communication pty, using the GDB/MI interface
-  call term_sendkeys(s:gdbbuf, 'new-ui mi ' . commpty . "\r")
+  " Connect gdb to the communication pty, using the GDB/MI interface.
+  " Prefix "server" to avoid adding this to the history.
+  call term_sendkeys(s:gdbbuf, 'server new-ui mi ' . commpty . "\r")
 
   " Wait for the response to show up, users may not notice the error and wonder
   " why the debugger doesn't work.
@@ -288,20 +304,21 @@ func s:StartDebug_term(dict)
       let line1 = term_getline(s:gdbbuf, lnum)
       let line2 = term_getline(s:gdbbuf, lnum + 1)
       if line1 =~ 'new-ui mi '
-	" response can be in the same line or the next line
-	let response = line1 . line2
-	if response =~ 'Undefined command'
-	  echoerr 'Sorry, your gdb is too old, gdb 7.12 is required'
-	  call s:CloseBuffers()
-	  return
-	endif
-	if response =~ 'New UI allocated'
-	  " Success!
-	  break
-	endif
+        " response can be in the same line or the next line
+        let response = line1 . line2
+        if response =~ 'Undefined command'
+          echoerr 'Sorry, your gdb is too old, gdb 7.12 is required'
+	  " CHECKME: possibly send a "server show version" here
+          call s:CloseBuffers()
+          return
+        endif
+        if response =~ 'New UI allocated'
+          " Success!
+          break
+        endif
       elseif line1 =~ 'Reading symbols from' && line2 !~ 'new-ui mi '
-	" Reading symbols might take a while, try more times
-	let try_count -= 1
+        " Reading symbols might take a while, try more times
+        let try_count -= 1
       endif
     endfor
     if response =~ 'New UI allocated'
@@ -315,17 +332,6 @@ func s:StartDebug_term(dict)
     sleep 10m
   endwhile
 
-  " Interpret commands while the target is running.  This should usually only be
-  " exec-interrupt, since many commands don't work properly while the target is
-  " running.
-  call s:SendCommand('-gdb-set mi-async on')
-  " Older gdb uses a different command.
-  call s:SendCommand('-gdb-set target-async on')
-
-  " Disable pagination, it causes everything to stop at the gdb
-  " "Type <return> to continue" prompt.
-  call s:SendCommand('set pagination off')
-
   call job_setoptions(term_getjob(s:gdbbuf), {'exit_cb': function('s:EndTermDebug')})
 
   " Set the filetype, this can be used to add mappings.
@@ -355,14 +361,26 @@ func s:StartDebug_prompt(dict)
     exe (&columns / 2 - 1) . "wincmd |"
   endif
 
-  " Add -quiet to avoid the intro message causing a hit-enter prompt.
   let gdb_args = get(a:dict, 'gdb_args', [])
   let proc_args = get(a:dict, 'proc_args', [])
 
-  let cmd = [g:termdebugger, '-quiet', '--interpreter=mi2'] + gdb_args
-  call ch_log('executing "' . join(cmd) . '"')
+  let gdb_cmd = [g:termdebugger]
+  " Add -quiet to avoid the intro message causing a hit-enter prompt.
+  let gdb_cmd += ['-quiet']
+  " Disable pagination, it causes everything to stop at the gdb, needs to be run early
+  let gdb_cmd += ['-iex', 'set pagination off']
+  " Interpret commands while the target is running.  This should usually only
+  " be exec-interrupt, since many commands don't work properly while the
+  " target is running (so execute during startup).
+  let gdb_cmd += ['-iex', 'set mi-async on']
+  " directly communicate via mi2
+  let gdb_cmd += ['--interpreter=mi2']
 
-  let s:gdbjob = job_start(cmd, {
+  " Adding arguments requested by the user
+  let gdb_cmd += gdb_args
+
+  call ch_log('executing "' . join(gdb_cmd) . '"')
+  let s:gdbjob = job_start(gdb_cmd, {
 	\ 'exit_cb': function('s:EndPromptDebug'),
 	\ 'out_cb': function('s:GdbOutCallback'),
 	\ })
@@ -375,13 +393,6 @@ func s:StartDebug_prompt(dict)
   set modified
   let s:gdb_channel = job_getchannel(s:gdbjob)  
 
-  " Interpret commands while the target is running.  This should usually only
-  " be exec-interrupt, since many commands don't work properly while the
-  " target is running.
-  call s:SendCommand('-gdb-set mi-async on')
-  " Older gdb uses a different command.
-  call s:SendCommand('-gdb-set target-async on')
-
   let s:ptybuf = 0
   if has('win32')
     " MS-Windows: run in a new console window for maximum compatibility
@@ -415,8 +426,6 @@ func s:StartDebug_prompt(dict)
   endif
   call s:SendCommand('set print pretty on')
   call s:SendCommand('set breakpoint pending on')
-  " Disable pagination, it causes everything to stop at the gdb
-  call s:SendCommand('set pagination off')
 
   " Set arguments to be run
   if len(proc_args)
@@ -470,7 +479,7 @@ func s:StartDebugCommon(dict)
   " Run the command if the bang attribute was given and got to the debug
   " window.
   if get(a:dict, 'bang', 0)
-    call s:SendCommand('-exec-run')
+    call s:SendResumingCommand('-exec-run')
     call win_gotoid(s:ptywin)
   endif
 endfunc
@@ -493,7 +502,7 @@ func TermDebugSendCommand(cmd)
     let do_continue = 0
     if !s:stopped
       let do_continue = 1
-      call s:SendCommand('-exec-interrupt')
+      Stop
       sleep 10m
     endif
     call term_sendkeys(s:gdbbuf, a:cmd . "\r")
@@ -503,6 +512,20 @@ func TermDebugSendCommand(cmd)
   endif
 endfunc
 
+" Send a command that resumes the program.  If the program isn't stopped the
+" command is not sent (to avoid a repeated command to cause trouble).
+" If the command is sent then reset s:stopped.
+func s:SendResumingCommand(cmd)
+  if s:stopped
+    " reset s:stopped here, it may take a bit of time before we get a response
+    let s:stopped = 0
+    call ch_log('assume that program is running after this command')
+    call s:SendCommand(a:cmd)
+  else
+    call ch_log('dropping command, program is running: ' . a:cmd)
+  endif
+endfunc
+
 " Function called when entering a line in the prompt buffer.
 func s:PromptCallback(text)
   call s:SendCommand(a:text)
@@ -534,7 +557,7 @@ func s:GdbOutCallback(channel, text)
   if a:text == '(gdb) ' || a:text == '^done' || a:text[0] == '&'
     return
   endif
-  if a:text =~ '^^error,msg='
+  if a:text =~ '^\^error,msg='
     let text = s:DecodeMessage(a:text[11:])
     if exists('s:evalexpr') && text =~ 'A syntax error in expression, near\|No symbol .* in current context'
       " Silently drop evaluation errors.
@@ -559,33 +582,33 @@ func s:GdbOutCallback(channel, text)
 endfunc
 
 " Decode a message from gdb.  quotedText starts with a ", return the text up
-" to the next ", unescaping characters.
+" to the next ", unescaping characters:
+" - remove line breaks
+" - change \\t to \t
+" - change \0xhh to \xhh (disabled for now)
+" - change \ooo to octal
+" - change \\ to \
 func s:DecodeMessage(quotedText)
   if a:quotedText[0] != '"'
     echoerr 'DecodeMessage(): missing quote in ' . a:quotedText
     return
   endif
-  let result = ''
-  let i = 1
-  while a:quotedText[i] != '"' && i < len(a:quotedText)
-    if a:quotedText[i] == '\'
-      let i += 1
-      if a:quotedText[i] == 'n'
-	" drop \n
-	let i += 1
-	continue
-      elseif a:quotedText[i] == 't'
-	" append \t
-	let i += 1
-	let result .= "\t"
-	continue
-      endif
-    endif
-    let result .= a:quotedText[i]
-    let i += 1
-  endwhile
-  return result
+  return a:quotedText
+        \ ->substitute('^"\|".*\|\\n', '', 'g')
+        \ ->substitute('\\t', "\t", 'g')
+        " multi-byte characters arrive in octal form
+        " NULL-values must be kept encoded as those break the string otherwise
+        \ ->substitute('\\000', s:NullRepl, 'g')
+        \ ->substitute('\\\o\o\o', {-> eval('"' .. submatch(0) .. '"')}, 'g')
+        " Note: GDB docs also mention hex encodings - the translations below work
+        "       but we keep them out for performance-reasons until we actually see
+        "       those in mi-returns
+        " \ ->substitute('\\0x\(\x\x\)', {-> eval('"\x' .. submatch(1) .. '"')}, 'g')
+        " \ ->substitute('\\0x00', s:NullRepl, 'g')
+        \ ->substitute('\\\\', '\', 'g')
+        \ ->substitute(s:NullRepl, '\\000', 'g')
 endfunc
+const s:NullRepl = 'XXXNULLXXX'
 
 " Extract the "name" value from a gdb message with fullname="name".
 func s:GetFullname(msg)
@@ -711,8 +734,8 @@ func s:HandleDisasmMsg(msg)
 
       let lnum = search('^' . s:asm_addr)
       if lnum != 0
-        exe 'sign unplace ' . s:asm_id
-        exe 'sign place ' . s:asm_id . ' line=' . lnum . ' name=debugPC'
+	exe 'sign unplace ' . s:asm_id
+	exe 'sign place ' . s:asm_id . ' line=' . lnum . ' name=debugPC'
       endif
 
       call win_gotoid(curwinid)
@@ -736,9 +759,9 @@ func s:HandleDisasmMsg(msg)
   else
     let value = substitute(a:msg, '^\~\"[ ]*', '', '')
     let value = substitute(value, '^=>[ ]*', '', '')
-    let value = substitute(value, '\\n\"
+    let value = substitute(value, '\\n\"\r$', '', '')
     let value = substitute(value, '\\n\"$', '', '')
-    let value = substitute(value, '\\n\"$', '', '')
+    let value = substitute(value, '\r', '', '')
     let value = substitute(value, '\\t', ' ', 'g')
 
     if value != '' || !empty(s:asm_lines)
@@ -763,7 +786,9 @@ func s:CommOutput(chan, msg)
       if msg =~ '^\(\*stopped\|\*running\|=thread-selected\)'
 	call s:HandleCursor(msg)
       elseif msg =~ '^\^done,bkpt=' || msg =~ '^=breakpoint-created,'
-	call s:HandleCursor(msg)
+        call s:HandleNewBreakpoint(msg, 0)
+      elseif msg =~ '^=breakpoint-modified,'
+        call s:HandleNewBreakpoint(msg, 1)
       elseif msg =~ '^=breakpoint-deleted,'
 	call s:HandleBreakpointDelete(msg)
       elseif msg =~ '^=thread-group-started'
@@ -773,8 +798,8 @@ func s:CommOutput(chan, msg)
       elseif msg =~ '^\^error,msg='
 	call s:HandleError(msg)
       elseif msg =~ '^disassemble'
-	call s:HandleError(msg)
-      elseif msg =~ '^disassemble'
+	let s:parsing_disasm_msg = 1
+	let s:asm_lines = []
       endif
     endif
   endfor
@@ -797,17 +822,20 @@ func s:InstallCommands()
 
   command -nargs=? Break call s:SetBreakpoint(<q-args>)
   command Clear call s:ClearBreakpoint()
-  command -nargs=? Break call s:SetBreakpoint(<q-args>)
-  command Clear call s:ClearBreakpoint()
-  command Step call s:SendCommand('-exec-step')
+  command Step call s:SendResumingCommand('-exec-step')
+  command Over call s:SendResumingCommand('-exec-next')
+  command Finish call s:SendResumingCommand('-exec-finish')
   command -nargs=* Run call s:Run(<q-args>)
-  command Finish call s:SendCommand('-exec-finish')
-  command -nargs=* Run call s:Run(<q-args>)
+  command -nargs=* Arguments call s:SendResumingCommand('-exec-arguments ' . <q-args>)
 
-  command Stop call s:SendCommand('-exec-interrupt')
   if s:way == 'prompt'
+    command Stop call s:PromptInterrupt()
     command Continue call s:SendCommand('continue')
   else
+    command Stop call s:SendCommand('-exec-interrupt')
+    " using -exec-continue results in CTRL-C in the gdb window not working,
+    " communicating via commbuf (= use of SendCommand) has the same result
+    "command Continue  call s:SendCommand('-exec-continue')
     command Continue call term_sendkeys(s:gdbbuf, "continue\r")
   endif
 
@@ -930,20 +958,16 @@ func s:SetBreakpoint(at)
   let do_continue = 0
   if !s:stopped
     let do_continue = 1
-  if !s:stopped
-    let do_continue = 1
-    if s:way == 'prompt'
-      call s:PromptInterrupt()
-    else
+    Stop
     sleep 10m
   endif
 
   " Use the fname:lnum format, older gdb can't handle --source.
   let at = empty(a:at) ?
-  " Use the fname:lnum format, older gdb can't handle --source.
+	\ fnameescape(expand('%:p')) . ':' . line('.') : a:at
   call s:SendCommand('-break-insert ' . at)
   if do_continue
-  call s:SendCommand('-break-insert ' . at)
+    Continue
   endif
 endfunc
 
@@ -954,6 +978,7 @@ func s:ClearBreakpoint()
   let bploc = printf('%s:%d', fname, lnum)
   if has_key(s:breakpoint_locations, bploc)
     let idx = 0
+    let nr = 0
     for id in s:breakpoint_locations[bploc]
       if has_key(s:breakpoints, id)
 	" Assume this always works, the reply is simply "^done".
@@ -963,46 +988,101 @@ func s:ClearBreakpoint()
 	endfor
 	unlet s:breakpoints[id]
 	unlet s:breakpoint_locations[bploc][idx]
+	let nr = id
 	break
       else
 	let idx += 1
       endif
     endfor
-      endif
-    endfor
+    if nr != 0
+      if empty(s:breakpoint_locations[bploc])
+	unlet s:breakpoint_locations[bploc]
+      endif
+      echomsg 'Breakpoint ' . id . ' cleared from line ' . lnum . '.'
+    else
+      echoerr 'Internal error trying to remove breakpoint at line ' . lnum . '!'
     endif
+  else
+    echomsg 'No breakpoint to remove at line ' . lnum . '.'
   endif
 endfunc
 
 func s:Run(args)
   if a:args != ''
-func s:Run(args)
+    call s:SendResumingCommand('-exec-arguments ' . a:args)
   endif
-    call s:SendCommand('-exec-arguments ' . a:args)
+  call s:SendResumingCommand('-exec-run')
 endfunc
 
 func s:SendEval(expr)
-
-func s:SendEval(expr)
+  " check for "likely" boolean expressions, in which case we take it as lhs
+  if a:expr =~ "[=!<>]="
+    let exprLHS = a:expr
+  else
+    " remove text that is likely an assignment
+    let exprLHS = substitute(a:expr, ' *=.*', '', '')
+  endif
+  
+  " encoding expression to prevent bad errors
+  let expr = a:expr
+  let expr = substitute(expr, '\\', '\\\\', 'g')
+  let expr = substitute(expr, '"', '\\"', 'g')
+  call s:SendCommand('-data-evaluate-expression "' . expr . '"')
+  let s:evalexpr = exprLHS
 endfunc
 
-endfunc
+" :Evaluate - evaluate what is specified / under the cursor 
 func s:Evaluate(range, arg)
+  let expr = s:GetEvaluationExpression(a:range, a:arg)
+  let s:ignoreEvalError = 0
+  call s:SendEval(expr)
+endfunc
+
+" get what is specified / under the cursor 
+func s:GetEvaluationExpression(range, arg)
   if a:arg != ''
-func s:Evaluate(range, arg)
+    " user supplied evaluation
+    let expr = s:CleanupExpr(a:arg)
+    " DSW: replace "likely copy + paste" assignment
+    let expr = substitute(expr, '"\([^"]*\)": *', '\1=', 'g')
   elseif a:range == 2
+    " no evaluation but provided but range set
     let pos = getcurpos()
     let reg = getreg('v', 1, 1)
     let regt = getregtype('v')
     normal! gv"vy
-    let regt = getregtype('v')
+    let expr = s:CleanupExpr(@v)
     call setpos('.', pos)
     call setreg('v', reg, regt)
   else
+    " no evaluation provided: get from C-expression under cursor
+    " TODO: allow filetype specific lookup #9057
     let expr = expand('<cexpr>')
   endif
-    let expr = expand('<cexpr>')
-  endif
+  return expr
+endfunc
+
+" clean up expression that may got in because of range
+" (newlines and surrounding whitespace)
+" As it can also be specified via ex-command for assignments this function
+" may not change the "content" parts (like replacing contained spaces
+func s:CleanupExpr(expr)
+  " replace all embedded newlines/tabs/...
+  let expr = substitute(a:expr, '\_s', ' ', 'g')
+
+  if &filetype ==# 'cobol'
+    " extra cleanup for COBOL:
+    " - a semicolon nmay be used instead of a space
+    " - a trailing comma or period is ignored as it commonly separates/ends
+    "   multiple expr
+    let expr = substitute(expr, ';', ' ', 'g')
+    let expr = substitute(expr, '[,.]\+ *$', '', '')
+  endif
+
+  " get rid of leading and trailing spaces
+  let expr = substitute(expr, '^ *', '', '')
+  let expr = substitute(expr, ' *$', '', '')
+  return expr
 endfunc
 
 let s:ignoreEvalError = 0
@@ -1010,8 +1090,19 @@ let s:evalFromBalloonExpr = 0
 
 " Handle the result of data-evaluate-expression
 func s:HandleEvaluate(msg)
-" Handle the result of data-evaluate-expression
-func s:HandleEvaluate(msg)
+  let value = a:msg
+    \ ->substitute('.*value="\(.*\)"', '\1', '')
+    \ ->substitute('\\"', '"', 'g')
+    \ ->substitute('\\\\', '\\', 'g')
+    "\ multi-byte characters arrive in octal form, replace everthing but NULL values
+    \ ->substitute('\\000', s:NullRepl, 'g')
+    \ ->substitute('\\\o\o\o', {-> eval('"' .. submatch(0) .. '"')}, 'g')
+    "\ Note: GDB docs also mention hex encodings - the translations below work
+    "\       but we keep them out for performance-reasons until we actually see
+    "\       those in mi-returns
+    "\ ->substitute('\\0x00', s:NullRep, 'g')
+    "\ ->substitute('\\0x\(\x\x\)', {-> eval('"\x' .. submatch(1) .. '"')}, 'g')
+    \ ->substitute(s:NullRepl, '\\000', 'g')
   if s:evalFromBalloonExpr
     if s:evalFromBalloonExprResult == ''
       let s:evalFromBalloonExprResult = s:evalexpr . ': ' . value
@@ -1046,7 +1137,8 @@ func TermDebugBalloonExpr()
   let s:evalFromBalloonExpr = 1
   let s:evalFromBalloonExprResult = ''
   let s:ignoreEvalError = 1
-  let s:evalFromBalloonExprResult = ''
+  let expr = s:CleanupExpr(v:beval_text)
+  call s:SendEval(expr)
   return ''
 endfunc
 
@@ -1058,7 +1150,8 @@ func s:HandleError(msg)
     let s:evalFromBalloonExpr = 0
     return
   endif
-    return
+  let msgVal = substitute(a:msg, '.*msg="\(.*\)"', '\1', '')
+  echoerr substitute(msgVal, '\\"', '"', 'g')
 endfunc
 
 func s:GotoSourcewinOrCreateIt()
@@ -1083,6 +1176,7 @@ func s:GotoAsmwinOrCreateIt()
     setlocal number
     setlocal noswapfile
     setlocal buftype=nofile
+    setlocal modifiable
 
     let asmbuf = bufnr('Termdebug-asm-listing')
     if asmbuf > 0
@@ -1093,7 +1187,7 @@ func s:GotoAsmwinOrCreateIt()
 
     if exists('g:termdebug_disasm_window')
       if g:termdebug_disasm_window > 1
-    if exists('g:termdebug_disasm_window')
+	exe 'resize ' . g:termdebug_disasm_window
       endif
     endif
   endif
@@ -1102,7 +1196,7 @@ func s:GotoAsmwinOrCreateIt()
     let lnum = search('^' . s:asm_addr)
     if lnum == 0
       if s:stopped
-    if lnum == 0
+	call s:SendCommand('disassemble $pc')
       endif
     else
       exe 'sign unplace ' . s:asm_id
@@ -1137,15 +1231,15 @@ func s:HandleCursor(msg)
 
       let curwinid = win_getid(winnr())
       if win_gotoid(s:asmwin)
-      let curwinid = win_getid(winnr())
-      if win_gotoid(s:asmwin)
-        let lnum = search('^' . s:asm_addr)
-        if lnum == 0
-          call s:SendCommand('disassemble $pc')
-        else
-          exe 'sign unplace ' . s:asm_id
+	let lnum = search('^' . s:asm_addr)
+	if lnum == 0
+	  call s:SendCommand('disassemble $pc')
+	else
+	  exe 'sign unplace ' . s:asm_id
+	  exe 'sign place ' . s:asm_id . ' line=' . lnum . ' name=debugPC'
+	endif
 
-        endif
+	call win_gotoid(curwinid)
       endif
     endif
   endif
@@ -1165,6 +1259,7 @@ func s:HandleCursor(msg)
 	endif
       endif
       exe lnum
+      normal! zv
       exe 'sign unplace ' . s:pc_id
       exe 'sign place ' . s:pc_id . ' line=' . lnum . ' name=debugPC priority=110 file=' . fname
       if !exists('b:save_signcolumn')
@@ -1182,11 +1277,16 @@ endfunc
 
 let s:BreakpointSigns = []
 
-let s:BreakpointSigns = []
+func s:CreateBreakpoint(id, subid, enabled)
   let nr = printf('%d.%d', a:id, a:subid)
   if index(s:BreakpointSigns, nr) == -1
     call add(s:BreakpointSigns, nr)
-  if index(s:BreakpointSigns, nr) == -1
+    if a:enabled == "n"
+      let hiName = "debugBreakpointDisabled"
+    else
+      let hiName = "debugBreakpoint"
+    endif
+    exe "sign define debugBreakpoint" . nr . " text=" . substitute(nr, '\..*', '', '') . " texthl=" . hiName
   endif
 endfunc
 
@@ -1196,9 +1296,14 @@ endfunction
 
 " Handle setting a breakpoint
 " Will update the sign that shows the breakpoint
-" Handle setting a breakpoint
+func s:HandleNewBreakpoint(msg, modifiedFlag)
   if a:msg !~ 'fullname='
-func s:HandleNewBreakpoint(msg)
+    " a watch or a pending breakpoint does not have a file name
+    if a:msg =~ 'pending='
+      let nr = substitute(a:msg, '.*number=\"\([0-9.]*\)\".*', '\1', '')
+      let target = substitute(a:msg, '.*pending=\"\([^"]*\)\".*', '\1', '')
+      echomsg 'Breakpoint ' . nr . ' (' . target  . ') pending.'
+    endif
     return
   endif
   for msg in s:SplitMsg(a:msg)
@@ -1214,7 +1319,8 @@ func s:HandleNewBreakpoint(msg)
     " If "nr" is 123 it becomes "123.0" and subid is "0".
     " If "nr" is 123.4 it becomes "123.4.0" and subid is "4"; "0" is discarded.
     let [id, subid; _] = map(split(nr . '.0', '\.'), 'v:val + 0')
-    " If "nr" is 123.4 it becomes "123.4.0" and subid is "4"; "0" is discarded.
+    let enabled = substitute(msg, '.*enabled="\([yn]\)".*', '\1', '')
+    call s:CreateBreakpoint(id, subid, enabled)
 
     if has_key(s:breakpoints, id)
       let entries = s:breakpoints[id]
@@ -1241,7 +1347,18 @@ func s:HandleNewBreakpoint(msg)
 
     if bufloaded(fname)
       call s:PlaceSign(id, subid, entry)
+      let posMsg = ' at line ' . lnum . '.'
+    else
+      let posMsg = ' in ' . fname . ' at line ' . lnum . '.'
     endif
+    if !a:modifiedFlag
+      let actionTaken = 'created'
+    elseif enabled == 'n'
+      let actionTaken = 'disabled'
+    else
+      let actionTaken = 'enabled'
+    endif
+    echomsg 'Breakpoint ' . nr . ' ' . actionTaken . posMsg
   endfor
 endfunc
 
@@ -1266,6 +1383,7 @@ func s:HandleBreakpointDelete(msg)
       endif
     endfor
     unlet s:breakpoints[id]
+    echomsg 'Breakpoint ' . id . ' cleared.'
   endif
 endfunc
 

runtime/plugin/zipPlugin.vim

@@ -20,7 +20,7 @@
 if &cp || exists("g:loaded_zipPlugin")
  finish
 endif
-let g:loaded_zipPlugin = "v31"
+let g:loaded_zipPlugin = "v32"
 let s:keepcpo          = &cpo
 set cpo&vim
 

runtime/rgb.txt

@@ -1,782 +0,0 @@
-255 250 250		snow
-248 248 255		ghost white
-248 248 255		GhostWhite
-245 245 245		white smoke
-245 245 245		WhiteSmoke
-220 220 220		gainsboro
-255 250 240		floral white
-255 250 240		FloralWhite
-253 245 230		old lace
-253 245 230		OldLace
-250 240 230		linen
-250 235 215		antique white
-250 235 215		AntiqueWhite
-255 239 213		papaya whip
-255 239 213		PapayaWhip
-255 235 205		blanched almond
-255 235 205		BlanchedAlmond
-255 228 196		bisque
-255 218 185		peach puff
-255 218 185		PeachPuff
-255 222 173		navajo white
-255 222 173		NavajoWhite
-255 228 181		moccasin
-255 248 220		cornsilk
-255 255 240		ivory
-255 250 205		lemon chiffon
-255 250 205		LemonChiffon
-255 245 238		seashell
-240 255 240		honeydew
-245 255 250		mint cream
-245 255 250		MintCream
-240 255 255		azure
-240 248 255		alice blue
-240 248 255		AliceBlue
-230 230 250		lavender
-255 240 245		lavender blush
-255 240 245		LavenderBlush
-255 228 225		misty rose
-255 228 225		MistyRose
-255 255 255		white
-  0   0   0		black
- 47  79  79		dark slate gray
- 47  79  79		DarkSlateGray
- 47  79  79		dark slate grey
- 47  79  79		DarkSlateGrey
-105 105 105		dim gray
-105 105 105		DimGray
-105 105 105		dim grey
-105 105 105		DimGrey
-112 128 144		slate gray
-112 128 144		SlateGray
-112 128 144		slate grey
-112 128 144		SlateGrey
-119 136 153		light slate gray
-119 136 153		LightSlateGray
-119 136 153		light slate grey
-119 136 153		LightSlateGrey
-190 190 190		gray
-190 190 190		grey
-190 190 190		x11 gray
-190 190 190		X11Gray
-190 190 190		x11 grey
-190 190 190		X11Grey
-128 128 128		web gray
-128 128 128		WebGray
-128 128 128		web grey
-128 128 128		WebGrey
-211 211 211		light grey
-211 211 211		LightGrey
-211 211 211		light gray
-211 211 211		LightGray
- 25  25 112		midnight blue
- 25  25 112		MidnightBlue
-  0   0 128		navy
-  0   0 128		navy blue
-  0   0 128		NavyBlue
-100 149 237		cornflower blue
-100 149 237		CornflowerBlue
- 72  61 139		dark slate blue
- 72  61 139		DarkSlateBlue
-106  90 205		slate blue
-106  90 205		SlateBlue
-123 104 238		medium slate blue
-123 104 238		MediumSlateBlue
-132 112 255		light slate blue
-132 112 255		LightSlateBlue
-  0   0 205		medium blue
-  0   0 205		MediumBlue
- 65 105 225		royal blue
- 65 105 225		RoyalBlue
-  0   0 255		blue
- 30 144 255		dodger blue
- 30 144 255		DodgerBlue
-  0 191 255		deep sky blue
-  0 191 255		DeepSkyBlue
-135 206 235		sky blue
-135 206 235		SkyBlue
-135 206 250		light sky blue
-135 206 250		LightSkyBlue
- 70 130 180		steel blue
- 70 130 180		SteelBlue
-176 196 222		light steel blue
-176 196 222		LightSteelBlue
-173 216 230		light blue
-173 216 230		LightBlue
-176 224 230		powder blue
-176 224 230		PowderBlue
-175 238 238		pale turquoise
-175 238 238		PaleTurquoise
-  0 206 209		dark turquoise
-  0 206 209		DarkTurquoise
- 72 209 204		medium turquoise
- 72 209 204		MediumTurquoise
- 64 224 208		turquoise
-  0 255 255		cyan
-  0 255 255		aqua
-224 255 255		light cyan
-224 255 255		LightCyan
- 95 158 160		cadet blue
- 95 158 160		CadetBlue
-102 205 170		medium aquamarine
-102 205 170		MediumAquamarine
-127 255 212		aquamarine
-  0 100   0		dark green
-  0 100   0		DarkGreen
- 85 107  47		dark olive green
- 85 107  47		DarkOliveGreen
-143 188 143		dark sea green
-143 188 143		DarkSeaGreen
- 46 139  87		sea green
- 46 139  87		SeaGreen
- 60 179 113		medium sea green
- 60 179 113		MediumSeaGreen
- 32 178 170		light sea green
- 32 178 170		LightSeaGreen
-152 251 152		pale green
-152 251 152		PaleGreen
-  0 255 127		spring green
-  0 255 127		SpringGreen
-124 252   0		lawn green
-124 252   0		LawnGreen
-  0 255   0		green
-  0 255   0		lime
-  0 255   0		x11 green
-  0 255   0		X11Green
-  0 128   0		web green
-  0 128   0		WebGreen
-127 255   0		chartreuse
-  0 250 154		medium spring green
-  0 250 154		MediumSpringGreen
-173 255  47		green yellow
-173 255  47		GreenYellow
- 50 205  50		lime green
- 50 205  50		LimeGreen
-154 205  50		yellow green
-154 205  50		YellowGreen
- 34 139  34		forest green
- 34 139  34		ForestGreen
-107 142  35		olive drab
-107 142  35		OliveDrab
-189 183 107		dark khaki
-189 183 107		DarkKhaki
-240 230 140		khaki
-238 232 170		pale goldenrod
-238 232 170		PaleGoldenrod
-250 250 210		light goldenrod yellow
-250 250 210		LightGoldenrodYellow
-255 255 224		light yellow
-255 255 224		LightYellow
-255 255   0		yellow
-255 215   0		gold
-238 221 130		light goldenrod
-238 221 130		LightGoldenrod
-218 165  32		goldenrod
-184 134  11		dark goldenrod
-184 134  11		DarkGoldenrod
-188 143 143		rosy brown
-188 143 143		RosyBrown
-205  92  92		indian red
-205  92  92		IndianRed
-139  69  19		saddle brown
-139  69  19		SaddleBrown
-160  82  45		sienna
-205 133  63		peru
-222 184 135		burlywood
-245 245 220		beige
-245 222 179		wheat
-244 164  96		sandy brown
-244 164  96		SandyBrown
-210 180 140		tan
-210 105  30		chocolate
-178  34  34		firebrick
-165  42  42		brown
-233 150 122		dark salmon
-233 150 122		DarkSalmon
-250 128 114		salmon
-255 160 122		light salmon
-255 160 122		LightSalmon
-255 165   0		orange
-255 140   0		dark orange
-255 140   0		DarkOrange
-255 127  80		coral
-240 128 128		light coral
-240 128 128		LightCoral
-255  99  71		tomato
-255  69   0		orange red
-255  69   0		OrangeRed
-255   0   0		red
-255 105 180		hot pink
-255 105 180		HotPink
-255  20 147		deep pink
-255  20 147		DeepPink
-255 192 203		pink
-255 182 193		light pink
-255 182 193		LightPink
-219 112 147		pale violet red
-219 112 147		PaleVioletRed
-176  48  96		maroon
-176  48  96		x11 maroon
-176  48  96		X11Maroon
-128   0   0		web maroon
-128   0   0		WebMaroon
-199  21 133		medium violet red
-199  21 133		MediumVioletRed
-208  32 144		violet red
-208  32 144		VioletRed
-255   0 255		magenta
-255   0 255		fuchsia
-238 130 238		violet
-221 160 221		plum
-218 112 214		orchid
-186  85 211		medium orchid
-186  85 211		MediumOrchid
-153  50 204		dark orchid
-153  50 204		DarkOrchid
-148   0 211		dark violet
-148   0 211		DarkViolet
-138  43 226		blue violet
-138  43 226		BlueViolet
-160  32 240		purple
-160  32 240		x11 purple
-160  32 240		X11Purple
-128   0 128		web purple
-128   0 128		WebPurple
-147 112 219		medium purple
-147 112 219		MediumPurple
-216 191 216		thistle
-255 250 250		snow1
-238 233 233		snow2
-205 201 201		snow3
-139 137 137		snow4
-255 245 238		seashell1
-238 229 222		seashell2
-205 197 191		seashell3
-139 134 130		seashell4
-255 239 219		AntiqueWhite1
-238 223 204		AntiqueWhite2
-205 192 176		AntiqueWhite3
-139 131 120		AntiqueWhite4
-255 228 196		bisque1
-238 213 183		bisque2
-205 183 158		bisque3
-139 125 107		bisque4
-255 218 185		PeachPuff1
-238 203 173		PeachPuff2
-205 175 149		PeachPuff3
-139 119 101		PeachPuff4
-255 222 173		NavajoWhite1
-238 207 161		NavajoWhite2
-205 179 139		NavajoWhite3
-139 121	 94		NavajoWhite4
-255 250 205		LemonChiffon1
-238 233 191		LemonChiffon2
-205 201 165		LemonChiffon3
-139 137 112		LemonChiffon4
-255 248 220		cornsilk1
-238 232 205		cornsilk2
-205 200 177		cornsilk3
-139 136 120		cornsilk4
-255 255 240		ivory1
-238 238 224		ivory2
-205 205 193		ivory3
-139 139 131		ivory4
-240 255 240		honeydew1
-224 238 224		honeydew2
-193 205 193		honeydew3
-131 139 131		honeydew4
-255 240 245		LavenderBlush1
-238 224 229		LavenderBlush2
-205 193 197		LavenderBlush3
-139 131 134		LavenderBlush4
-255 228 225		MistyRose1
-238 213 210		MistyRose2
-205 183 181		MistyRose3
-139 125 123		MistyRose4
-240 255 255		azure1
-224 238 238		azure2
-193 205 205		azure3
-131 139 139		azure4
-131 111 255		SlateBlue1
-122 103 238		SlateBlue2
-105  89 205		SlateBlue3
- 71  60 139		SlateBlue4
- 72 118 255		RoyalBlue1
- 67 110 238		RoyalBlue2
- 58  95 205		RoyalBlue3
- 39  64 139		RoyalBlue4
-  0   0 255		blue1
-  0   0 238		blue2
-  0   0 205		blue3
-  0   0 139		blue4
- 30 144 255		DodgerBlue1
- 28 134 238		DodgerBlue2
- 24 116 205		DodgerBlue3
- 16  78 139		DodgerBlue4
- 99 184 255		SteelBlue1
- 92 172 238		SteelBlue2
- 79 148 205		SteelBlue3
- 54 100 139		SteelBlue4
-  0 191 255		DeepSkyBlue1
-  0 178 238		DeepSkyBlue2
-  0 154 205		DeepSkyBlue3
-  0 104 139		DeepSkyBlue4
-135 206 255		SkyBlue1
-126 192 238		SkyBlue2
-108 166 205		SkyBlue3
- 74 112 139		SkyBlue4
-176 226 255		LightSkyBlue1
-164 211 238		LightSkyBlue2
-141 182 205		LightSkyBlue3
- 96 123 139		LightSkyBlue4
-198 226 255		SlateGray1
-185 211 238		SlateGray2
-159 182 205		SlateGray3
-108 123 139		SlateGray4
-202 225 255		LightSteelBlue1
-188 210 238		LightSteelBlue2
-162 181 205		LightSteelBlue3
-110 123 139		LightSteelBlue4
-191 239 255		LightBlue1
-178 223 238		LightBlue2
-154 192 205		LightBlue3
-104 131 139		LightBlue4
-224 255 255		LightCyan1
-209 238 238		LightCyan2
-180 205 205		LightCyan3
-122 139 139		LightCyan4
-187 255 255		PaleTurquoise1
-174 238 238		PaleTurquoise2
-150 205 205		PaleTurquoise3
-102 139 139		PaleTurquoise4
-152 245 255		CadetBlue1
-142 229 238		CadetBlue2
-122 197 205		CadetBlue3
- 83 134 139		CadetBlue4
-  0 245 255		turquoise1
-  0 229 238		turquoise2
-  0 197 205		turquoise3
-  0 134 139		turquoise4
-  0 255 255		cyan1
-  0 238 238		cyan2
-  0 205 205		cyan3
-  0 139 139		cyan4
-151 255 255		DarkSlateGray1
-141 238 238		DarkSlateGray2
-121 205 205		DarkSlateGray3
- 82 139 139		DarkSlateGray4
-127 255 212		aquamarine1
-118 238 198		aquamarine2
-102 205 170		aquamarine3
- 69 139 116		aquamarine4
-193 255 193		DarkSeaGreen1
-180 238 180		DarkSeaGreen2
-155 205 155		DarkSeaGreen3
-105 139 105		DarkSeaGreen4
- 84 255 159		SeaGreen1
- 78 238 148		SeaGreen2
- 67 205 128		SeaGreen3
- 46 139	 87		SeaGreen4
-154 255 154		PaleGreen1
-144 238 144		PaleGreen2
-124 205 124		PaleGreen3
- 84 139	 84		PaleGreen4
-  0 255 127		SpringGreen1
-  0 238 118		SpringGreen2
-  0 205 102		SpringGreen3
-  0 139	 69		SpringGreen4
-  0 255	  0		green1
-  0 238	  0		green2
-  0 205	  0		green3
-  0 139	  0		green4
-127 255	  0		chartreuse1
-118 238	  0		chartreuse2
-102 205	  0		chartreuse3
- 69 139	  0		chartreuse4
-192 255	 62		OliveDrab1
-179 238	 58		OliveDrab2
-154 205	 50		OliveDrab3
-105 139	 34		OliveDrab4
-202 255 112		DarkOliveGreen1
-188 238 104		DarkOliveGreen2
-162 205	 90		DarkOliveGreen3
-110 139	 61		DarkOliveGreen4
-255 246 143		khaki1
-238 230 133		khaki2
-205 198 115		khaki3
-139 134	 78		khaki4
-255 236 139		LightGoldenrod1
-238 220 130		LightGoldenrod2
-205 190 112		LightGoldenrod3
-139 129	 76		LightGoldenrod4
-255 255 224		LightYellow1
-238 238 209		LightYellow2
-205 205 180		LightYellow3
-139 139 122		LightYellow4
-255 255	  0		yellow1
-238 238	  0		yellow2
-205 205	  0		yellow3
-139 139	  0		yellow4
-255 215	  0		gold1
-238 201	  0		gold2
-205 173	  0		gold3
-139 117	  0		gold4
-255 193	 37		goldenrod1
-238 180	 34		goldenrod2
-205 155	 29		goldenrod3
-139 105	 20		goldenrod4
-255 185	 15		DarkGoldenrod1
-238 173	 14		DarkGoldenrod2
-205 149	 12		DarkGoldenrod3
-139 101	  8		DarkGoldenrod4
-255 193 193		RosyBrown1
-238 180 180		RosyBrown2
-205 155 155		RosyBrown3
-139 105 105		RosyBrown4
-255 106 106		IndianRed1
-238  99	 99		IndianRed2
-205  85	 85		IndianRed3
-139  58	 58		IndianRed4
-255 130	 71		sienna1
-238 121	 66		sienna2
-205 104	 57		sienna3
-139  71	 38		sienna4
-255 211 155		burlywood1
-238 197 145		burlywood2
-205 170 125		burlywood3
-139 115	 85		burlywood4
-255 231 186		wheat1
-238 216 174		wheat2
-205 186 150		wheat3
-139 126 102		wheat4
-255 165	 79		tan1
-238 154	 73		tan2
-205 133	 63		tan3
-139  90	 43		tan4
-255 127	 36		chocolate1
-238 118	 33		chocolate2
-205 102	 29		chocolate3
-139  69	 19		chocolate4
-255  48	 48		firebrick1
-238  44	 44		firebrick2
-205  38	 38		firebrick3
-139  26	 26		firebrick4
-255  64	 64		brown1
-238  59	 59		brown2
-205  51	 51		brown3
-139  35	 35		brown4
-255 140 105		salmon1
-238 130	 98		salmon2
-205 112	 84		salmon3
-139  76	 57		salmon4
-255 160 122		LightSalmon1
-238 149 114		LightSalmon2
-205 129	 98		LightSalmon3
-139  87	 66		LightSalmon4
-255 165	  0		orange1
-238 154	  0		orange2
-205 133	  0		orange3
-139  90	  0		orange4
-255 127	  0		DarkOrange1
-238 118	  0		DarkOrange2
-205 102	  0		DarkOrange3
-139  69	  0		DarkOrange4
-255 114	 86		coral1
-238 106	 80		coral2
-205  91	 69		coral3
-139  62	 47		coral4
-255  99	 71		tomato1
-238  92	 66		tomato2
-205  79	 57		tomato3
-139  54	 38		tomato4
-255  69	  0		OrangeRed1
-238  64	  0		OrangeRed2
-205  55	  0		OrangeRed3
-139  37	  0		OrangeRed4
-255   0	  0		red1
-238   0	  0		red2
-205   0	  0		red3
-139   0	  0		red4
-255  20 147		DeepPink1
-238  18 137		DeepPink2
-205  16 118		DeepPink3
-139  10	 80		DeepPink4
-255 110 180		HotPink1
-238 106 167		HotPink2
-205  96 144		HotPink3
-139  58  98		HotPink4
-255 181 197		pink1
-238 169 184		pink2
-205 145 158		pink3
-139  99 108		pink4
-255 174 185		LightPink1
-238 162 173		LightPink2
-205 140 149		LightPink3
-139  95 101		LightPink4
-255 130 171		PaleVioletRed1
-238 121 159		PaleVioletRed2
-205 104 137		PaleVioletRed3
-139  71	 93		PaleVioletRed4
-255  52 179		maroon1
-238  48 167		maroon2
-205  41 144		maroon3
-139  28	 98		maroon4
-255  62 150		VioletRed1
-238  58 140		VioletRed2
-205  50 120		VioletRed3
-139  34	 82		VioletRed4
-255   0 255		magenta1
-238   0 238		magenta2
-205   0 205		magenta3
-139   0 139		magenta4
-255 131 250		orchid1
-238 122 233		orchid2
-205 105 201		orchid3
-139  71 137		orchid4
-255 187 255		plum1
-238 174 238		plum2
-205 150 205		plum3
-139 102 139		plum4
-224 102 255		MediumOrchid1
-209  95 238		MediumOrchid2
-180  82 205		MediumOrchid3
-122  55 139		MediumOrchid4
-191  62 255		DarkOrchid1
-178  58 238		DarkOrchid2
-154  50 205		DarkOrchid3
-104  34 139		DarkOrchid4
-155  48 255		purple1
-145  44 238		purple2
-125  38 205		purple3
- 85  26 139		purple4
-171 130 255		MediumPurple1
-159 121 238		MediumPurple2
-137 104 205		MediumPurple3
- 93  71 139		MediumPurple4
-255 225 255		thistle1
-238 210 238		thistle2
-205 181 205		thistle3
-139 123 139		thistle4
-  0   0   0		gray0
-  0   0   0		grey0
-  3   3   3		gray1
-  3   3   3		grey1
-  5   5   5		gray2
-  5   5   5		grey2
-  8   8   8		gray3
-  8   8   8		grey3
- 10  10  10		gray4
- 10  10  10		grey4
- 13  13  13		gray5
- 13  13  13		grey5
- 15  15  15		gray6
- 15  15  15		grey6
- 18  18  18		gray7
- 18  18  18		grey7
- 20  20  20		gray8
- 20  20  20		grey8
- 23  23  23		gray9
- 23  23  23		grey9
- 26  26  26		gray10
- 26  26  26		grey10
- 28  28  28		gray11
- 28  28  28		grey11
- 31  31  31		gray12
- 31  31  31		grey12
- 33  33  33		gray13
- 33  33  33		grey13
- 36  36  36		gray14
- 36  36  36		grey14
- 38  38  38		gray15
- 38  38  38		grey15
- 41  41  41		gray16
- 41  41  41		grey16
- 43  43  43		gray17
- 43  43  43		grey17
- 46  46  46		gray18
- 46  46  46		grey18
- 48  48  48		gray19
- 48  48  48		grey19
- 51  51  51		gray20
- 51  51  51		grey20
- 54  54  54		gray21
- 54  54  54		grey21
- 56  56  56		gray22
- 56  56  56		grey22
- 59  59  59		gray23
- 59  59  59		grey23
- 61  61  61		gray24
- 61  61  61		grey24
- 64  64  64		gray25
- 64  64  64		grey25
- 66  66  66		gray26
- 66  66  66		grey26
- 69  69  69		gray27
- 69  69  69		grey27
- 71  71  71		gray28
- 71  71  71		grey28
- 74  74  74		gray29
- 74  74  74		grey29
- 77  77  77		gray30
- 77  77  77		grey30
- 79  79  79		gray31
- 79  79  79		grey31
- 82  82  82		gray32
- 82  82  82		grey32
- 84  84  84		gray33
- 84  84  84		grey33
- 87  87  87		gray34
- 87  87  87		grey34
- 89  89  89		gray35
- 89  89  89		grey35
- 92  92  92		gray36
- 92  92  92		grey36
- 94  94  94		gray37
- 94  94  94		grey37
- 97  97  97		gray38
- 97  97  97		grey38
- 99  99  99		gray39
- 99  99  99		grey39
-102 102 102		gray40
-102 102 102		grey40
-105 105 105		gray41
-105 105 105		grey41
-107 107 107		gray42
-107 107 107		grey42
-110 110 110		gray43
-110 110 110		grey43
-112 112 112		gray44
-112 112 112		grey44
-115 115 115		gray45
-115 115 115		grey45
-117 117 117		gray46
-117 117 117		grey46
-120 120 120		gray47
-120 120 120		grey47
-122 122 122		gray48
-122 122 122		grey48
-125 125 125		gray49
-125 125 125		grey49
-127 127 127		gray50
-127 127 127		grey50
-130 130 130		gray51
-130 130 130		grey51
-133 133 133		gray52
-133 133 133		grey52
-135 135 135		gray53
-135 135 135		grey53
-138 138 138		gray54
-138 138 138		grey54
-140 140 140		gray55
-140 140 140		grey55
-143 143 143		gray56
-143 143 143		grey56
-145 145 145		gray57
-145 145 145		grey57
-148 148 148		gray58
-148 148 148		grey58
-150 150 150		gray59
-150 150 150		grey59
-153 153 153		gray60
-153 153 153		grey60
-156 156 156		gray61
-156 156 156		grey61
-158 158 158		gray62
-158 158 158		grey62
-161 161 161		gray63
-161 161 161		grey63
-163 163 163		gray64
-163 163 163		grey64
-166 166 166		gray65
-166 166 166		grey65
-168 168 168		gray66
-168 168 168		grey66
-171 171 171		gray67
-171 171 171		grey67
-173 173 173		gray68
-173 173 173		grey68
-176 176 176		gray69
-176 176 176		grey69
-179 179 179		gray70
-179 179 179		grey70
-181 181 181		gray71
-181 181 181		grey71
-184 184 184		gray72
-184 184 184		grey72
-186 186 186		gray73
-186 186 186		grey73
-189 189 189		gray74
-189 189 189		grey74
-191 191 191		gray75
-191 191 191		grey75
-194 194 194		gray76
-194 194 194		grey76
-196 196 196		gray77
-196 196 196		grey77
-199 199 199		gray78
-199 199 199		grey78
-201 201 201		gray79
-201 201 201		grey79
-204 204 204		gray80
-204 204 204		grey80
-207 207 207		gray81
-207 207 207		grey81
-209 209 209		gray82
-209 209 209		grey82
-212 212 212		gray83
-212 212 212		grey83
-214 214 214		gray84
-214 214 214		grey84
-217 217 217		gray85
-217 217 217		grey85
-219 219 219		gray86
-219 219 219		grey86
-222 222 222		gray87
-222 222 222		grey87
-224 224 224		gray88
-224 224 224		grey88
-227 227 227		gray89
-227 227 227		grey89
-229 229 229		gray90
-229 229 229		grey90
-232 232 232		gray91
-232 232 232		grey91
-235 235 235		gray92
-235 235 235		grey92
-237 237 237		gray93
-237 237 237		grey93
-240 240 240		gray94
-240 240 240		grey94
-242 242 242		gray95
-242 242 242		grey95
-245 245 245		gray96
-245 245 245		grey96
-247 247 247		gray97
-247 247 247		grey97
-250 250 250		gray98
-250 250 250		grey98
-252 252 252		gray99
-252 252 252		grey99
-255 255 255		gray100
-255 255 255		grey100
-169 169 169		dark grey
-169 169 169		DarkGrey
-169 169 169		dark gray
-169 169 169		DarkGray
-0     0 139		dark blue
-0     0 139		DarkBlue
-0   139 139		dark cyan
-0   139 139		DarkCyan
-139   0 139		dark magenta
-139   0 139		DarkMagenta
-139   0   0		dark red
-139   0   0		DarkRed
-144 238 144		light green
-144 238 144		LightGreen
-220  20  60		crimson
- 75   0 130		indigo
-128 128   0		olive
-102  51 153		rebecca purple
-102  51 153		RebeccaPurple
-192 192 192		silver
-  0 128 128		teal

runtime/scripts.vim

@@ -190,6 +190,18 @@ if s:line1 =~# "^#!"
   elseif s:name =~# 'fennel\>'
     set ft=fennel
 
+    " MikroTik RouterOS script
+  elseif s:name =~# 'rsc\>'
+    set ft=routeros
+
+    " Fish shell
+  elseif s:name =~# 'fish\>'
+    set ft=fish
+
+    " Gforth
+  elseif s:name =~# 'gforth\>'
+    set ft=forth
+
   endif
   unlet s:name
 
@@ -390,6 +402,10 @@ else
   elseif s:line1 =~# '^%YAML'
     set ft=yaml
 
+  " MikroTik RouterOS script
+  elseif s:line1 =~# '^#.*by RouterOS.*$'
+    set ft=routeros
+
   " CVS diff
   else
     let s:lnum = 1

runtime/syntax/arduino.vim

@@ -6,7 +6,7 @@
 
 " Syntax highlighting like in the Arduino IDE
 " Automatically generated by the script available at
-"    https://bitbucket.org/johannes/arduino-vim-syntax
+"    https://github.com/johshoff/arduino-vim-syntax
 " Using keywords from <arduino>/build/shared/lib/keywords.txt
 " From version: 1.8.16
 

runtime/syntax/autoit.vim

@@ -5,6 +5,7 @@
 " Authored By:	Riccardo Casini <ric@libero.it>
 " Script URL:	http://www.vim.org/scripts/script.php?script_id=1239
 " ChangeLog:	Please visit the script URL for detailed change information
+" 		Included change from #970.
 
 " Quit when a syntax file was already loaded.
 if exists("b:current_syntax")
@@ -932,7 +933,7 @@ syn match autoitConst "\$SD_POWERDOWN"
 " constants - string
 syn match autoitConst "\$STR_NOCASESENSE"
 syn match autoitConst "\$STR_CASESENSE"
-syn match autoitConst "\STR_STRIPLEADING"
+syn match autoitConst "\$STR_STRIPLEADING"
 syn match autoitConst "\$STR_STRIPTRAILING"
 syn match autoitConst "\$STR_STRIPSPACES"
 syn match autoitConst "\$STR_STRIPALL"

runtime/syntax/c.vim

@@ -1,7 +1,7 @@
 " Vim syntax file
 " Language:	C
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2021 May 24
+" Last Change:	2021 Dec 07
 
 " Quit when a (custom) syntax file was already loaded
 if exists("b:current_syntax")
@@ -196,7 +196,6 @@ syn match	cNumber		display contained "0x\x\+\(u\=l\{0,2}\|ll\=u\)\>"
 " Flag the first zero of an octal number as something special
 syn match	cOctal		display contained "0\o\+\(u\=l\{0,2}\|ll\=u\)\>" contains=cOctalZero
 syn match	cOctalZero	display contained "\<0"
-syn match	cFloat		display contained "\d\+f"
 "floating point number, with dot, optional exponent
 syn match	cFloat		display contained "\d\+\.\d*\(e[-+]\=\d\+\)\=[fl]\="
 "floating point number, starting with a dot, optional exponent

runtime/syntax/css.vim

@@ -7,7 +7,7 @@
 "               Nikolai Weibull (Add CSS2 support)
 " URL:          https://github.com/vim-language-dept/css-syntax.vim
 " Maintainer:   Jay Sitter <jay@jaysitter.com>
-" Last Change:  2021 Oct 15
+" Last Change:  2021 Oct 20
 
 " quit when a syntax file was already loaded
 if !exists("main_syntax")
@@ -116,7 +116,7 @@ syn keyword cssColor contained ActiveBorder ActiveCaption AppWorkspace ButtonFac
 syn case ignore
 
 syn match cssImportant contained "!\s*important\>"
-syn match cssCustomProp contained "--[a-zA-Z0-9-_]*"
+syn match cssCustomProp contained "\<--[a-zA-Z0-9-_]*\>"
 
 syn match cssColor contained "\<transparent\>"
 syn match cssColor contained "\<currentColor\>"
@@ -126,6 +126,7 @@ syn match cssColor contained "#\x\{6\}\>" contains=cssUnitDecorators
 syn match cssColor contained "#\x\{8\}\>" contains=cssUnitDecorators
 
 syn region cssURL contained matchgroup=cssFunctionName start="\<\(uri\|url\|local\|format\)\s*(" end=")" contains=cssStringQ,cssStringQQ oneline
+syn region cssMathGroup contained matchgroup=cssMathParens start="(" end=")" containedin=cssFunction,cssMathGroup contains=cssCustomProp,cssValue.*,cssFunction,cssColor,cssStringQ,cssStringQQ oneline
 syn region cssFunction contained matchgroup=cssFunctionName start="\<\(var\|calc\)\s*(" end=")" contains=cssCustomProp,cssValue.*,cssFunction,cssColor,cssStringQ,cssStringQQ oneline
 syn region cssFunction contained matchgroup=cssFunctionName start="\<\(rgb\|clip\|attr\|counter\|rect\|cubic-bezier\|steps\)\s*(" end=")" oneline  contains=cssValueInteger,cssValueNumber,cssValueLength,cssFunctionComma
 syn region cssFunction contained matchgroup=cssFunctionName start="\<\(rgba\|hsl\|hsla\|color-stop\|from\|to\)\s*(" end=")" oneline  contains=cssColor,cssValueInteger,cssValueNumber,cssValueLength,cssFunctionComma,cssFunction
@@ -395,9 +396,9 @@ syn match cssUIAttr contained '\<preserve-3d\>'
 syn match cssIEUIAttr contained '\<bicubic\>'
 
 " Webkit/iOS specific properties
-syn match cssUIProp contained '\<tap-highlight-color\|user-select\|touch-callout\>'
+syn match cssUIProp contained '\<\(tap-highlight-color\|user-select\|touch-callout\)\>'
 " IE specific properties
-syn match cssIEUIProp contained '\<interpolation-mode\|zoom\|filter\>'
+syn match cssIEUIProp contained '\<\(interpolation-mode\|zoom\|filter\)\>'
 
 " Webkit/Firebox specific properties/attributes
 syn keyword cssUIProp contained appearance
@@ -423,11 +424,15 @@ syn keyword cssAuralAttr contained male female child code digits continuous
 syn match cssMobileTextProp contained "\<text-size-adjust\>"
 
 syn keyword cssMediaProp contained width height orientation scan
-syn match cssMediaProp contained /\(\(max\|min\)-\)\=\(\(device\)-\)\=aspect-ratio/
-syn match cssMediaProp contained /\(\(max\|min\)-\)\=device-pixel-ratio/
-syn match cssMediaProp contained /\(\(max\|min\)-\)\=device-\(height\|width\)/
-syn match cssMediaProp contained /\(\(max\|min\)-\)\=\(height\|width\|resolution\|monochrome\|color\(-index\)\=\)/
+syn keyword cssMediaProp contained any-hover any-pointer color-gamut grid hover
+syn keyword cssMediaProp contained overflow-block overflow-inline pointer update
+syn match cssMediaProp contained /\<\(\(max\|min\)-\)\=\(\(device\)-\)\=aspect-ratio\>/
+syn match cssMediaProp contained /\<\(\(max\|min\)-\)\=device-pixel-ratio\>/
+syn match cssMediaProp contained /\<\(\(max\|min\)-\)\=device-\(height\|width\)\>/
+syn match cssMediaProp contained /\<\(\(max\|min\)-\)\=\(height\|width\|resolution\|monochrome\|color\(-index\)\=\)\>/
 syn keyword cssMediaAttr contained portrait landscape progressive interlace
+syn keyword cssMediaAttr contained coarse fast fine hover infinite p3 paged
+syn keyword cssMediaAttr contained rec2020 scroll slow srgb
 syn match cssKeyFrameProp contained /\(\d\+\(\.\d\+\)\?%\|\(\<from\|to\>\)\)/ nextgroup=cssDefinition
 syn match cssPageMarginProp /@\(\(top\|left\|right\|bottom\)-\(left\|center\|right\|middle\|bottom\)\)\(-corner\)\=/ contained nextgroup=cssDefinition
 syn keyword cssPageProp contained content size
@@ -445,17 +450,17 @@ syn match cssBraceError "}"
 syn match cssAttrComma ","
 
 " Pseudo class
-" http://www.w3.org/TR/css3-selectors/
+" https://www.w3.org/TR/selectors-4/
 syn match cssPseudoClass ":[A-Za-z0-9_-]*" contains=cssNoise,cssPseudoClassId,cssUnicodeEscape,cssVendor,cssPseudoClassFn
 syn keyword cssPseudoClassId contained link visited active hover before after left right
-syn keyword cssPseudoClassId contained root empty target enable disabled checked invalid
+syn keyword cssPseudoClassId contained root empty target enabled disabled checked invalid
 syn match cssPseudoClassId contained "\<first-\(line\|letter\)\>"
 syn match cssPseudoClassId contained "\<\(first\|last\|only\)-\(of-type\|child\)\>"
-syn region cssPseudoClassFn contained matchgroup=cssFunctionName start="\<\(not\|lang\|\(nth\|nth-last\)-\(of-type\|child\)\)(" end=")" contains=cssStringQ,cssStringQQ
+syn match cssPseudoClassId contained  "\<focus\(-within\|-visible\)\=\>"
+syn region cssPseudoClassFn contained matchgroup=cssFunctionName start="\<\(not\|is\|lang\|\(nth\|nth-last\)-\(of-type\|child\)\)(" end=")" contains=cssStringQ,cssStringQQ,cssTagName,cssAttributeSelector,cssClassName,cssIdentifier
 " ------------------------------------
 " Vendor specific properties
 syn match cssPseudoClassId contained  "\<selection\>"
-syn match cssPseudoClassId contained  "\<focus\(-inner\)\=\>"
 syn match cssPseudoClassId contained  "\<\(input-\)\=placeholder\>"
 
 " Misc highlight groups

runtime/syntax/django.vim

@@ -1,7 +1,7 @@
 " Vim syntax file
 " Language:	Django template
 " Maintainer:	Dave Hodder <dmh@dmh.org.uk>
-" Last Change:	2014 Jul 13
+" Last Change:	2021 Nov 29
 
 " quit when a syntax file was already loaded
 if exists("b:current_syntax")
@@ -31,6 +31,7 @@ syn keyword djangoStatement contained closecomment widthratio url with endwith
 syn keyword djangoStatement contained get_current_language trans noop blocktrans
 syn keyword djangoStatement contained endblocktrans get_available_languages
 syn keyword djangoStatement contained get_current_language_bidi plural
+syn keyword djangoStatement contained translate blocktranslate endblocktranslate
 
 " Django templete built-in filters
 syn keyword djangoFilter contained add addslashes capfirst center cut date

runtime/syntax/gdb.vim

@@ -2,7 +2,8 @@
 " Language:	GDB command files
 " Maintainer:	Claudio Fleiner <claudio@fleiner.com>
 " URL:		http://www.fleiner.com/vim/syntax/gdb.vim
-" Last Change:	2012 Oct 05
+" Last Change:	2021 Nov 15
+" 		Additional changes by Simon Sobisch
 
 " quit when a syntax file was already loaded
 if exists("b:current_syntax")
@@ -21,19 +22,19 @@ syn match gdbInfo contained "all-registers"
 
 
 syn keyword gdbStatement contained actions apply attach awatch backtrace break bt call catch cd clear collect commands
-syn keyword gdbStatement contained complete condition continue delete detach directory disable disassemble display down
+syn keyword gdbStatement contained complete condition continue delete detach directory disable disas[semble] disp[lay] down
 syn keyword gdbStatement contained echo else enable end file finish frame handle hbreak help if ignore
 syn keyword gdbStatement contained inspect jump kill list load maintenance make next nexti ni output overlay
-syn keyword gdbStatement contained passcount path print printf ptype pwd quit rbreak remote return run rwatch
-syn keyword gdbStatement contained search section set sharedlibrary shell show si signal source step stepi stepping
+syn keyword gdbStatement contained passcount path print printf ptype python pwd quit rbreak remote return run rwatch
+syn keyword gdbStatement contained search section set sharedlibrary shell show si signal skip source step stepi stepping
 syn keyword gdbStatement contained stop target tbreak tdump tfind thbreak thread tp trace tstart tstatus tstop
-syn keyword gdbStatement contained tty undisplay unset until up watch whatis where while ws x
+syn keyword gdbStatement contained tty und[isplay] unset until up watch whatis where while ws x
 syn match gdbFuncDef "\<define\>.*"
 syn match gdbStatmentContainer "^\s*\S\+" contains=gdbStatement,gdbFuncDef
 syn match gdbStatement "^\s*info" nextgroup=gdbInfo skipwhite skipempty
 
 " some commonly used abbreviations
-syn keyword gdbStatement c disp undisp disas p
+syn keyword gdbStatement c cont p py
 
 syn region gdbDocument matchgroup=gdbFuncDef start="\<document\>.*$" matchgroup=gdbFuncDef end="^end\s*$"
 

runtime/syntax/gnuplot.vim

@@ -3,7 +3,8 @@
 " Maintainer:	Josh Wainwright <wainwright DOT ja AT gmail DOT com>
 " Last Maintainer:	Andrew Rasmussen andyras@users.sourceforge.net
 " Original Maintainer:	John Hoelzel johnh51@users.sourceforge.net
-" Last Change:	2020 May 12
+" Last Change:	2021 Nov 16
+" 		additional changes from PR #8949
 " Filenames:	*.gnu *.plt *.gpi *.gih *.gp *.gnuplot scripts: #!*gnuplot
 " URL:		http://www.vim.org/scripts/script.php?script_id=4873
 " Original URL:	http://johnh51.get.to/vim/syntax/gnuplot.vim
@@ -32,22 +33,22 @@ syn match gnuplotSpecial	"\\." contained
 " syn match gnuplotSpecial	"\\\o\o\o\|\\x\x\x\|\\c[^"]\|\\[a-z\\]" contained
 
 " measurements in the units in, cm and pt are special
-syn match gnuplotUnit		"[0-9]+in"
-syn match gnuplotUnit		"[0-9]+cm"
-syn match gnuplotUnit		"[0-9]+pt"
+syn match gnuplotUnit		"\d+in"
+syn match gnuplotUnit		"\d+cm"
+syn match gnuplotUnit		"\d+pt"
 
 " external (shell) commands are special
-syn region gnuplotExternal	start="!" end="$"
+syn region gnuplotExternal	start="^\s*!" end="$"
 
 " ---- Comments ---- "
 
-syn region gnuplotComment	start="#" end="$" contains=gnuplotTodo
+syn region gnuplotComment	start="#" end="$" contains=gnuplotTodo,@Spell
 
 " ---- Constants ---- "
 
 " strings
-syn region gnuplotString	start=+"+ skip=+\\"+ end=+"+ contains=gnuplotSpecial
-syn region gnuplotString	start="'" end="'"
+syn region gnuplotString	start=+"+ skip=+\\"+ end=+"+ contains=gnuplotSpecial,@Spell
+syn region gnuplotString	start="'" end="'" contains=@Spell
 
 " built-in variables
 syn keyword gnuplotNumber	GNUTERM GPVAL_TERM GPVAL_TERMOPTIONS GPVAL_SPLOT
@@ -76,7 +77,7 @@ syn keyword gnuplotNumber	GPVAL_TERM_YSIZE GPVAL_VIEW_MAP GPVAL_VIEW_ROT_X
 syn keyword gnuplotNumber	GPVAL_VIEW_ROT_Z GPVAL_VIEW_SCALE
 
 " function name variables
-syn match gnuplotNumber		"GPFUN_[a-zA-Z_]*"
+syn match gnuplotNumber		"GPFUN_\h*"
 
 " stats variables
 syn keyword gnuplotNumber	STATS_records STATS_outofrange STATS_invalid
@@ -104,23 +105,23 @@ syn keyword gnuplotError	FIT_LAMBDA_FACTOR FIT_LOG FIT_SCRIPT
 
 " integer number, or floating point number without a dot and with "f".
 syn case    ignore
-syn match   gnuplotNumber	"\<[0-9]\+\(u\=l\=\|lu\|f\)\>"
+syn match   gnuplotNumber	"\<\d\+\(u\=l\=\|lu\|f\)\>"
 
 " floating point number, with dot, optional exponent
-syn match   gnuplotFloat	"\<[0-9]\+\.[0-9]*\(e[-+]\=[0-9]\+\)\=[fl]\=\>"
+syn match   gnuplotFloat	"\<\d\+\.\d*\(e[-+]\=\d\+\)\=[fl]\=\>"
 
 " floating point number, starting with a dot, optional exponent
-syn match   gnuplotFloat	"\.[0-9]\+\(e[-+]\=[0-9]\+\)\=[fl]\=\>"
+syn match   gnuplotFloat	"\.\d\+\(e[-+]\=\d\+\)\=[fl]\=\>"
 
 " floating point number, without dot, with exponent
-syn match   gnuplotFloat	"\<[0-9]\+e[-+]\=[0-9]\+[fl]\=\>"
+syn match   gnuplotFloat	"\<\d\+e[-+]\=\d\+[fl]\=\>"
 
 " hex number
-syn match   gnuplotNumber	"\<0x[0-9a-f]\+\(u\=l\=\|lu\)\>"
+syn match   gnuplotNumber	"\<0x\x\+\(u\=l\=\|lu\)\>"
 syn case    match
 
 " flag an octal number with wrong digits by not highlighting
-syn match   gnuplotOctalError	"\<0[0-7]*[89]"
+syn match   gnuplotOctalError	"\<0\o*[89]"
 
 " ---- Identifiers: Functions ---- "
 
@@ -374,8 +375,8 @@ syn keyword gnuplotKeyword	nohead nooutliers nowedge off opaque outliers
 syn keyword gnuplotKeyword	palette pattern pi pointinterval pointsize
 syn keyword gnuplotKeyword	pointtype ps pt radius range rectangle
 syn keyword gnuplotKeyword	rowstacked screen separation size solid sorted
-syn keyword gnuplotKeyword	textbox transparent units unsorted userstyles
-syn keyword gnuplotKeyword	wedge x x2 xx xy yy
+syn keyword gnuplotKeyword	textbox units unsorted userstyles wedge
+syn keyword gnuplotKeyword	x x2 xx xy yy
 " set surface
 syn keyword gnuplotKeyword	surface implicit explicit
 " set table
@@ -477,9 +478,13 @@ syn keyword gnuplotKeyword	nooutput
 " keywords for 'test' command
 syn keyword gnuplotKeyword	terminal palette rgb rbg grb gbr brg bgr
 
+" The transparent gnuplot keyword cannot use 'syn keyword' as transparent
+" has a special meaning in :syntax commands.
+syn match gnuplotKeyword	"\<transparent\>"
+
 " ---- Macros ---- "
 
-syn match gnuplotMacro		"@[a-zA-Z0-9_]*"
+syn match gnuplotMacro		"@\w*"
 
 " ---- Todos ---- "
 

runtime/syntax/help_ru.vim

@@ -1,12 +1,12 @@
 " Vim syntax file
 " Language:     Russian Vim program help files *.rux
-" Maintainer:   Restorer (restorers@users.sourceforge.net)
+" Maintainer:   Restorer (restorers@users.sourceforge.net DEFUNCT)
 " Last Change:  04 Aprl 2017
 " 
 
 " Проверяем язык локали и установки опции 'helplang'
 " Если не русский, то выходим из скрипта.
-if ('ru' !~? v:lang || 'russian' !~? v:lang) && 'ru' !~? &helplang
+if (v:lang !~? 'ru' || v:lang !~? 'russian') && &helplang !~? 'ru'
   finish
 endif
 

runtime/syntax/i3config.vim

@@ -0,0 +1,256 @@
+" Vim syntax file
+" Language: i3 config file
+" Maintainer: Mohamed Boughaba <mohamed dot bgb at gmail dot com>
+" Version: 0.4
+" Last Change: 2021 Dec 14
+
+" References:
+" http://i3wm.org/docs/userguide.html#configuring
+" http://vimdoc.sourceforge.net/htmldoc/syntax.html
+"
+"
+" Quit when a syntax file was already loaded
+if exists("b:current_syntax")
+  finish
+endif
+
+scriptencoding utf-8
+
+" Error
+syn match i3ConfigError /.*/
+
+" Todo
+syn keyword i3ConfigTodo TODO FIXME XXX contained
+
+" Comment
+" Comments are started with a # and can only be used at the beginning of a line
+syn match i3ConfigComment /^\s*#.*$/ contains=i3ConfigTodo
+
+" Font
+" A FreeType font description is composed by:
+" a font family, a style, a weight, a variant, a stretch and a size.
+syn match i3ConfigFontSeparator /,/ contained
+syn match i3ConfigFontSeparator /:/ contained
+syn keyword i3ConfigFontKeyword font contained
+syn match i3ConfigFontNamespace /\w\+:/ contained contains=i3ConfigFontSeparator
+syn match i3ConfigFontContent /-\?\w\+\(-\+\|\s\+\|,\)/ contained contains=i3ConfigFontNamespace,i3ConfigFontSeparator,i3ConfigFontKeyword
+syn match i3ConfigFontSize /\s\=\d\+\(px\)\?\s\?$/ contained
+syn match i3ConfigFont /^\s*font\s\+.*$/ contains=i3ConfigFontContent,i3ConfigFontSeparator,i3ConfigFontSize,i3ConfigFontNamespace
+syn match i3ConfigFont /^\s*font\s\+.*\(\\\_.*\)\?$/ contains=i3ConfigFontContent,i3ConfigFontSeparator,i3ConfigFontSize,i3ConfigFontNamespace
+syn match i3ConfigFont /^\s*font\s\+.*\(\\\_.*\)\?[^\\]\+$/ contains=i3ConfigFontContent,i3ConfigFontSeparator,i3ConfigFontSize,i3ConfigFontNamespace
+syn match i3ConfigFont /^\s*font\s\+\(\(.*\\\_.*\)\|\(.*[^\\]\+$\)\)/ contains=i3ConfigFontContent,i3ConfigFontSeparator,i3ConfigFontSize,i3ConfigFontNamespace
+
+" variables
+syn match i3ConfigString /\(['"]\)\(.\{-}\)\1/ contained
+syn match i3ConfigColor /#\w\{6}/ contained
+syn match i3ConfigVariableModifier /+/ contained
+syn match i3ConfigVariableAndModifier /+\w\+/ contained contains=i3ConfigVariableModifier
+syn match i3ConfigVariable /\$\w\+\(\(-\w\+\)\+\)\?\(\s\|+\)\?/ contains=i3ConfigVariableModifier,i3ConfigVariableAndModifier
+syn keyword i3ConfigInitializeKeyword set contained
+syn match i3ConfigInitialize /^\s*set\s\+.*$/ contains=i3ConfigVariable,i3ConfigInitializeKeyword,i3ConfigColor,i3ConfigString
+
+" Gaps
+syn keyword i3ConfigGapStyleKeyword inner outer horizontal vertical top right bottom left current all set plus minus toggle up down contained
+syn match i3ConfigGapStyle /^\s*\(gaps\)\s\+\(inner\|outer\|horizontal\|vertical\|left\|top\|right\|bottom\)\(\s\+\(current\|all\)\)\?\(\s\+\(set\|plus\|minus\|toggle\)\)\?\(\s\+\(-\?\d\+\|\$.*\)\)$/ contains=i3ConfigGapStyleKeyword,i3ConfigNumber,i3ConfigVariable
+syn keyword i3ConfigSmartGapKeyword on inverse_outer contained
+syn match i3ConfigSmartGap /^\s*smart_gaps\s\+\(on\|inverse_outer\)\s\?$/ contains=i3ConfigSmartGapKeyword
+syn keyword i3ConfigSmartBorderKeyword on no_gaps contained
+syn match i3ConfigSmartBorder /^\s*smart_borders\s\+\(on\|no_gaps\)\s\?$/ contains=i3ConfigSmartBorderKeyword
+
+" Keyboard bindings
+syn keyword i3ConfigAction toggle fullscreen restart key import kill shrink grow contained
+syn keyword i3ConfigAction focus move grow height width split layout resize restore reload mute unmute exit mode workspace container to contained
+syn match i3ConfigModifier /\w\++\w\+\(\(+\w\+\)\+\)\?/ contained contains=i3ConfigVariableModifier
+syn match i3ConfigNumber /\s\d\+/ contained
+syn match i3ConfigUnit /\sp\(pt\|x\)/ contained
+syn match i3ConfigUnitOr /\sor/ contained
+syn keyword i3ConfigBindKeyword bindsym bindcode exec gaps border contained
+syn match i3ConfigBindArgument /--\w\+\(\(-\w\+\)\+\)\?\s/ contained
+syn match i3ConfigBind /^\s*\(bindsym\|bindcode\)\s\+.*$/ contains=i3ConfigVariable,i3ConfigBindKeyword,i3ConfigVariableAndModifier,i3ConfigNumber,i3ConfigUnit,i3ConfigUnitOr,i3ConfigBindArgument,i3ConfigModifier,i3ConfigAction,i3ConfigString,i3ConfigGapStyleKeyword,i3ConfigBorderStyleKeyword
+
+" Floating
+syn keyword i3ConfigSizeSpecial x contained
+syn match i3ConfigNegativeSize /-/ contained
+syn match i3ConfigSize /-\?\d\+\s\?x\s\?-\?\d\+/ contained contains=i3ConfigSizeSpecial,i3ConfigNumber,i3ConfigNegativeSize
+syn match i3ConfigFloating /^\s*floating_modifier\s\+\$\w\+\d\?/ contains=i3ConfigVariable
+syn match i3ConfigFloating /^\s*floating_\(maximum\|minimum\)_size\s\+-\?\d\+\s\?x\s\?-\?\d\+/ contains=i3ConfigSize
+
+" Orientation
+syn keyword i3ConfigOrientationKeyword vertical horizontal auto contained
+syn match i3ConfigOrientation /^\s*default_orientation\s\+\(vertical\|horizontal\|auto\)\s\?$/ contains=i3ConfigOrientationKeyword
+
+" Layout
+syn keyword i3ConfigLayoutKeyword default stacking tabbed contained
+syn match i3ConfigLayout /^\s*workspace_layout\s\+\(default\|stacking\|tabbed\)\s\?$/ contains=i3ConfigLayoutKeyword
+
+" Border style
+syn keyword i3ConfigBorderStyleKeyword none normal pixel contained
+syn match i3ConfigBorderStyle /^\s*\(new_window\|new_float\|default_border\|default_floating_border\)\s\+\(none\|\(normal\|pixel\)\(\s\+\d\+\)\?\(\s\+\$\w\+\(\(-\w\+\)\+\)\?\(\s\|+\)\?\)\?\)\s\?$/ contains=i3ConfigBorderStyleKeyword,i3ConfigNumber,i3ConfigVariable
+
+" Hide borders and edges
+syn keyword i3ConfigEdgeKeyword none vertical horizontal both smart smart_no_gaps contained
+syn match i3ConfigEdge /^\s*hide_edge_borders\s\+\(none\|vertical\|horizontal\|both\|smart\|smart_no_gaps\)\s\?$/ contains=i3ConfigEdgeKeyword
+
+" Arbitrary commands for specific windows (for_window)
+syn keyword i3ConfigCommandKeyword for_window contained
+syn region i3ConfigWindowStringSpecial start=+"+  skip=+\\"+  end=+"+ contained contains=i3ConfigString
+syn region i3ConfigWindowCommandSpecial start="\[" end="\]" contained contains=i3ConfigWindowStringSpacial,i3ConfigString
+syn match i3ConfigArbitraryCommand /^\s*for_window\s\+.*$/ contains=i3ConfigWindowCommandSpecial,i3ConfigCommandKeyword,i3ConfigBorderStyleKeyword,i3ConfigLayoutKeyword,i3ConfigOrientationKeyword,Size,i3ConfigNumber
+
+" Disable focus open opening
+syn keyword i3ConfigNoFocusKeyword no_focus contained
+syn match i3ConfigDisableFocus /^\s*no_focus\s\+.*$/ contains=i3ConfigWindowCommandSpecial,i3ConfigNoFocusKeyword
+
+" Move client to specific workspace automatically
+syn keyword i3ConfigAssignKeyword assign contained
+syn match i3ConfigAssignSpecial /→/ contained
+syn match i3ConfigAssign /^\s*assign\s\+.*$/ contains=i3ConfigAssignKeyword,i3ConfigWindowCommandSpecial,i3ConfigAssignSpecial
+
+" X resources
+syn keyword i3ConfigResourceKeyword set_from_resource contained
+syn match i3ConfigResource /^\s*set_from_resource\s\+.*$/ contains=i3ConfigResourceKeyword,i3ConfigWindowCommandSpecial,i3ConfigColor,i3ConfigVariable
+
+" Auto start applications
+syn keyword i3ConfigExecKeyword exec exec_always contained
+syn match i3ConfigNoStartupId /--no-startup-id/ contained " We are not using i3ConfigBindArgument as only no-startup-id is supported here
+syn match i3ConfigExec /^\s*exec\(_always\)\?\s\+.*$/ contains=i3ConfigExecKeyword,i3ConfigNoStartupId,i3ConfigString
+
+" Automatically putting workspaces on specific screens
+syn keyword i3ConfigWorkspaceKeyword workspace contained
+syn keyword i3ConfigOutput output contained
+syn match i3ConfigWorkspace /^\s*workspace\s\+.*$/ contains=i3ConfigWorkspaceKeyword,i3ConfigNumber,i3ConfigString,i3ConfigOutput
+
+" Changing colors
+syn keyword i3ConfigClientColorKeyword client focused focused_inactive unfocused urgent placeholder background contained
+syn match i3ConfigClientColor /^\s*client.\w\+\s\+.*$/ contains=i3ConfigClientColorKeyword,i3ConfigColor,i3ConfigVariable
+
+syn keyword i3ConfigTitleAlignKeyword left center right contained
+syn match i3ConfigTitleAlign /^\s*title_align\s\+.*$/ contains=i3ConfigTitleAlignKeyword
+
+" Interprocess communication
+syn match i3ConfigInterprocessKeyword /ipc-socket/ contained
+syn match i3ConfigInterprocess /^\s*ipc-socket\s\+.*$/ contains=i3ConfigInterprocessKeyword
+
+" Mouse warping
+syn keyword i3ConfigMouseWarpingKeyword mouse_warping contained
+syn keyword i3ConfigMouseWarpingType output none contained
+syn match i3ConfigMouseWarping /^\s*mouse_warping\s\+\(output\|none\)\s\?$/ contains=i3ConfigMouseWarpingKeyword,i3ConfigMouseWarpingType
+
+" Focus follows mouse
+syn keyword i3ConfigFocusFollowsMouseKeyword focus_follows_mouse contained
+syn keyword i3ConfigFocusFollowsMouseType yes no contained
+syn match i3ConfigFocusFollowsMouse /^\s*focus_follows_mouse\s\+\(yes\|no\)\s\?$/ contains=i3ConfigFocusFollowsMouseKeyword,i3ConfigFocusFollowsMouseType
+
+" Popups during fullscreen mode
+syn keyword i3ConfigPopupOnFullscreenKeyword popup_during_fullscreen contained
+syn keyword i3ConfigPopuponFullscreenType smart ignore leave_fullscreen contained
+syn match i3ConfigPopupOnFullscreen /^\s*popup_during_fullscreen\s\+\w\+\s\?$/ contains=i3ConfigPopupOnFullscreenKeyword,i3ConfigPopupOnFullscreenType
+
+" Focus wrapping
+syn keyword i3ConfigFocusWrappingKeyword force_focus_wrapping focus_wrapping contained
+syn keyword i3ConfigFocusWrappingType yes no contained
+syn match i3ConfigFocusWrapping /^\s*\(force_\)\?focus_wrapping\s\+\(yes\|no\)\s\?$/ contains=i3ConfigFocusWrappingType,i3ConfigFocusWrappingKeyword
+
+" Forcing Xinerama
+syn keyword i3ConfigForceXineramaKeyword force_xinerama contained
+syn match i3ConfigForceXinerama /^\s*force_xinerama\s\+\(yes\|no\)\s\?$/ contains=i3ConfigFocusWrappingType,i3ConfigForceXineramaKeyword
+
+" Automatic back-and-forth when switching to the current workspace
+syn keyword i3ConfigAutomaticSwitchKeyword workspace_auto_back_and_forth contained
+syn match i3ConfigAutomaticSwitch /^\s*workspace_auto_back_and_forth\s\+\(yes\|no\)\s\?$/ contains=i3ConfigFocusWrappingType,i3ConfigAutomaticSwitchKeyword
+
+" Delay urgency hint
+syn keyword i3ConfigTimeUnit ms contained
+syn keyword i3ConfigDelayUrgencyKeyword force_display_urgency_hint contained
+syn match i3ConfigDelayUrgency /^\s*force_display_urgency_hint\s\+\d\+\s\+ms\s\?$/ contains=i3ConfigFocusWrappingType,i3ConfigDelayUrgencyKeyword,i3ConfigNumber,i3ConfigTimeUnit
+
+" Focus on window activation
+syn keyword i3ConfigFocusOnActivationKeyword focus_on_window_activation contained
+syn keyword i3ConfigFocusOnActivationType smart urgent focus none contained
+syn match i3ConfigFocusOnActivation /^\s*focus_on_window_activation\s\+\(smart\|urgent\|focus\|none\)\s\?$/  contains=i3ConfigFocusOnActivationKeyword,i3ConfigFocusOnActivationType
+
+" Automatic back-and-forth when switching to the current workspace
+syn keyword i3ConfigDrawingMarksKeyword show_marks contained
+syn match i3ConfigDrawingMarks /^\s*show_marks\s\+\(yes\|no\)\s\?$/ contains=i3ConfigFocusWrappingType,i3ConfigDrawingMarksKeyword
+
+" Group mode/bar
+syn keyword i3ConfigBlockKeyword mode bar colors i3bar_command status_command position exec mode hidden_state modifier id position output background statusline tray_output tray_padding separator separator_symbol workspace_buttons strip_workspace_numbers binding_mode_indicator focused_workspace active_workspace inactive_workspace urgent_workspace binding_mode contained
+syn region i3ConfigBlock start=+.*s\?{$+ end=+^}$+ contains=i3ConfigBlockKeyword,i3ConfigString,i3ConfigBind,i3ConfigComment,i3ConfigFont,i3ConfigFocusWrappingType,i3ConfigColor,i3ConfigVariable transparent keepend extend
+
+" Line continuation
+syn region i3ConfigLineCont start=/^.*\\$/ end=/^.*$/ contains=i3ConfigBlockKeyword,i3ConfigString,i3ConfigBind,i3ConfigComment,i3ConfigFont,i3ConfigFocusWrappingType,i3ConfigColor,i3ConfigVariable transparent keepend extend
+
+" Define the highlighting.
+hi def link i3ConfigError                           Error
+hi def link i3ConfigTodo                            Todo
+hi def link i3ConfigComment                         Comment
+hi def link i3ConfigFontContent                     Type
+hi def link i3ConfigFocusOnActivationType           Type
+hi def link i3ConfigPopupOnFullscreenType           Type
+hi def link i3ConfigOrientationKeyword              Type
+hi def link i3ConfigMouseWarpingType                Type
+hi def link i3ConfigFocusFollowsMouseType           Type
+hi def link i3ConfigGapStyleKeyword                 Type
+hi def link i3ConfigTitleAlignKeyword               Type
+hi def link i3ConfigSmartGapKeyword                 Type
+hi def link i3ConfigSmartBorderKeyword              Type
+hi def link i3ConfigLayoutKeyword                   Type
+hi def link i3ConfigBorderStyleKeyword              Type
+hi def link i3ConfigEdgeKeyword                     Type
+hi def link i3ConfigAction                          Type
+hi def link i3ConfigCommand                         Type
+hi def link i3ConfigOutput                          Type
+hi def link i3ConfigWindowCommandSpecial            Type
+hi def link i3ConfigFocusWrappingType               Type
+hi def link i3ConfigUnitOr                          Type
+hi def link i3ConfigFontSize                        Constant
+hi def link i3ConfigColor                           Constant
+hi def link i3ConfigNumber                          Constant
+hi def link i3ConfigUnit                            Constant
+hi def link i3ConfigVariableAndModifier             Constant
+hi def link i3ConfigTimeUnit                        Constant
+hi def link i3ConfigModifier                        Constant
+hi def link i3ConfigString                          Constant
+hi def link i3ConfigNegativeSize                    Constant
+hi def link i3ConfigFontSeparator                   Special
+hi def link i3ConfigVariableModifier                Special
+hi def link i3ConfigSizeSpecial                     Special
+hi def link i3ConfigWindowSpecial                   Special
+hi def link i3ConfigAssignSpecial                   Special
+hi def link i3ConfigFontNamespace                   PreProc
+hi def link i3ConfigBindArgument                    PreProc
+hi def link i3ConfigNoStartupId                     PreProc
+hi def link i3ConfigFontKeyword                     Identifier
+hi def link i3ConfigBindKeyword                     Identifier
+hi def link i3ConfigOrientation                     Identifier
+hi def link i3ConfigGapStyle                        Identifier
+hi def link i3ConfigTitleAlign                      Identifier
+hi def link i3ConfigSmartGap                        Identifier
+hi def link i3ConfigSmartBorder                     Identifier
+hi def link i3ConfigLayout                          Identifier
+hi def link i3ConfigBorderStyle                     Identifier
+hi def link i3ConfigEdge                            Identifier
+hi def link i3ConfigFloating                        Identifier
+hi def link i3ConfigCommandKeyword                  Identifier
+hi def link i3ConfigNoFocusKeyword                  Identifier
+hi def link i3ConfigInitializeKeyword               Identifier
+hi def link i3ConfigAssignKeyword                   Identifier
+hi def link i3ConfigResourceKeyword                 Identifier
+hi def link i3ConfigExecKeyword                     Identifier
+hi def link i3ConfigWorkspaceKeyword                Identifier
+hi def link i3ConfigClientColorKeyword              Identifier
+hi def link i3ConfigInterprocessKeyword             Identifier
+hi def link i3ConfigMouseWarpingKeyword             Identifier
+hi def link i3ConfigFocusFollowsMouseKeyword        Identifier
+hi def link i3ConfigPopupOnFullscreenKeyword        Identifier
+hi def link i3ConfigFocusWrappingKeyword            Identifier
+hi def link i3ConfigForceXineramaKeyword            Identifier
+hi def link i3ConfigAutomaticSwitchKeyword          Identifier
+hi def link i3ConfigDelayUrgencyKeyword             Identifier
+hi def link i3ConfigFocusOnActivationKeyword        Identifier
+hi def link i3ConfigDrawingMarksKeyword             Identifier
+hi def link i3ConfigBlockKeyword                    Identifier
+hi def link i3ConfigVariable                        Statement
+hi def link i3ConfigArbitraryCommand                Type
+
+let b:current_syntax = "i3config"

runtime/syntax/indent.vim

@@ -1,7 +1,8 @@
 " Vim syntax file
-" Language:             indent(1) configuration file
-" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
-" Latest Revision:      2010-01-23
+" Language:		indent(1) configuration file
+" Maintainer:		Doug Kearns <dougkearns@gmail.com>
+" Previous Maintainer:	Nikolai Weibull <now@bitwi.se>
+" Last Change:		2021 Nov 17
 "   indent_is_bsd:      If exists, will change somewhat to match BSD implementation
 "
 " TODO:     is the deny-all (a la lilo.vim nice or no?)...
@@ -27,7 +28,7 @@ syn region  indentComment start='//' skip='\\$' end='$'
                           \ contains=indentTodo,@Spell
 
 if !exists("indent_is_bsd")
-  syn match indentOptions '-i\|--indentation-level\|-il\|--indent-level'
+  syn match indentOptions '-i\|--indent-level\|-il\|--indent-label'
                         \ nextgroup=indentNumber skipwhite skipempty
 endif
 syn match   indentOptions '-\%(bli\|c\%([bl]i\|[dip]\)\=\|di\=\|ip\=\|lc\=\|pp\=i\|sbi\|ts\|-\%(brace-indent\|comment-indentation\|case-brace-indentation\|declaration-comment-column\|continuation-indentation\|case-indentation\|else-endif-column\|line-comments-indentation\|declaration-indentation\|indent-level\|parameter-indentation\|line-length\|comment-line-length\|paren-indentation\|preprocessor-indentation\|struct-brace-indentation\|tab-size\)\)'

runtime/syntax/lisp.vim

@@ -1,8 +1,8 @@
 " Vim syntax file
 " Language:    Lisp
 " Maintainer:  Charles E. Campbell <NcampObell@SdrPchip.AorgM-NOSPAM>
-" Last Change: Jul 11, 2019
-" Version:     30
+" Last Change: Nov 10, 2021
+" Version:     31
 " URL:	http://www.drchip.org/astronaut/vim/index.html#SYNTAX_LISP
 "
 "  Thanks to F Xavier Noria for a list of 978 Common Lisp symbols taken from HyperSpec
@@ -54,20 +54,20 @@ if exists("g:lisp_rainbow") && g:lisp_rainbow != 0
  syn region lispParen8 contained matchgroup=hlLevel8 start="`\=(" end=")" skip="|.\{-}|" contains=@lispListCluster,lispParen9
  syn region lispParen9 contained matchgroup=hlLevel9 start="`\=(" end=")" skip="|.\{-}|" contains=@lispListCluster,lispParen0
 else
- syn region lispList			matchgroup=lispParen start="("   skip="|.\{-}|"			matchgroup=lispParen end=")"	contains=@lispListCluster
- syn region lispBQList			matchgroup=PreProc   start="`("  skip="|.\{-}|"			matchgroup=PreProc   end=")"		contains=@lispListCluster
+ syn region lispList		matchgroup=lispParen start="("   skip="|.\{-}|"		matchgroup=lispParen end=")"	contains=@lispListCluster
+ syn region lispBQList		matchgroup=PreProc   start="`("  skip="|.\{-}|"		matchgroup=PreProc   end=")"	contains=@lispListCluster
 endif
 
 " ---------------------------------------------------------------------
 " Atoms: {{{1
-syn match lispAtomMark			"'"
-syn match lispAtom			"'("me=e-1			contains=lispAtomMark	nextgroup=lispAtomList
-syn match lispAtom			"'[^ \t()]\+"			contains=lispAtomMark
-syn match lispAtomBarSymbol		!'|..\{-}|!			contains=lispAtomMark
-syn region lispAtom			start=+'"+			skip=+\\"+ end=+"+
-syn region lispAtomList			contained			matchgroup=Special start="("	skip="|.\{-}|" matchgroup=Special end=")"	contains=@lispAtomCluster,lispString,lispEscapeSpecial
-syn match lispAtomNmbr			contained			"\<\d\+"
-syn match lispLeadWhite			contained			"^\s\+"
+syn match lispAtomMark		"'"
+syn match lispAtom		"'("me=e-1			contains=lispAtomMark	nextgroup=lispAtomList
+syn match lispAtom		"'[^ \t()]\+"			contains=lispAtomMark
+syn match lispAtomBarSymbol	!'|..\{-}|!			contains=lispAtomMark
+syn region lispAtom		start=+'"+			skip=+\\"+ end=+"+
+syn region lispAtomList		contained			matchgroup=Special start="("	skip="|.\{-}|" matchgroup=Special end=")"	contains=@lispAtomCluster,lispString,lispEscapeSpecial
+syn match lispAtomNmbr		contained			"\<\d\+"
+syn match lispLeadWhite		contained			"^\s\+"
 
 " ---------------------------------------------------------------------
 " Standard Lisp Functions and Macros: {{{1
@@ -553,6 +553,8 @@ syn match lispParenError	")"
 syn cluster lispCommentGroup	contains=lispTodo,@Spell
 syn match   lispComment		";.*$"				contains=@lispCommentGroup
 syn region  lispCommentRegion	start="#|" end="|#"		contains=lispCommentRegion,@lispCommentGroup
+syn region  lispComment		start="#+nil"	end="\ze)"	contains=@lispCommentGroup
+syn match   lispComment		'^\s*#+nil.*$'			contains=@lispCommentGroup
 syn keyword lispTodo		contained			combak			combak:			todo			todo:
 
 " ---------------------------------------------------------------------

runtime/syntax/meson.vim

@@ -3,7 +3,7 @@
 " License:	VIM License
 " Maintainer:	Nirbheek Chauhan <nirbheek.chauhan@gmail.com>
 "		Liam Beguin <liambeguin@gmail.com>
-" Last Change:	2019 Oct 18
+" Last Change:	2021 Aug 16
 " Credits:	Zvezdan Petkovic <zpetkovic@acm.org>
 "		Neil Schemenauer <nas@meson.ca>
 "		Dmitry Vasiliev
@@ -56,9 +56,11 @@ syn match   mesonEscape	"\\$"
 " Meson only supports integer numbers
 " http://mesonbuild.com/Syntax.html#numbers
 syn match   mesonNumber	"\<\d\+\>"
+syn match   mesonNumber	"\<0x\x\+\>"
+syn match   mesonNumber	"\<0o\o\+\>"
 
 " booleans
-syn keyword mesonConstant	false true
+syn keyword mesonBoolean	false true
 
 " Built-in functions
 syn keyword mesonBuiltin
@@ -97,6 +99,7 @@ syn keyword mesonBuiltin
   \ install_headers
   \ install_man
   \ install_subdir
+  \ install_emptydir
   \ is_disabler
   \ is_variable
   \ jar
@@ -118,6 +121,7 @@ syn keyword mesonBuiltin
   \ summary
   \ target_machine
   \ test
+  \ unset_variable
   \ vcs_tag
   \ warning
   \ range
@@ -133,15 +137,15 @@ endif
 " The default highlight links.  Can be overridden later.
 hi def link mesonStatement	Statement
 hi def link mesonConditional	Conditional
-hi def link mesonRepeat	Repeat
+hi def link mesonRepeat		Repeat
 hi def link mesonOperator	Operator
 hi def link mesonComment	Comment
 hi def link mesonTodo		Todo
-hi def link mesonString	String
-hi def link mesonEscape	Special
-hi def link mesonNumber	Number
+hi def link mesonString		String
+hi def link mesonEscape		Special
+hi def link mesonNumber		Number
 hi def link mesonBuiltin	Function
-hi def link mesonConstant	Number
+hi def link mesonBoolean	Boolean
 if exists("meson_space_error_higlight")
   hi def link mesonSpaceError	Error
 endif

runtime/syntax/python.vim

@@ -1,7 +1,7 @@
 " Vim syntax file
 " Language:	Python
 " Maintainer:	Zvezdan Petkovic <zpetkovic@acm.org>
-" Last Change:	2021 Feb 15
+" Last Change:	2021 Dec 10
 " Credits:	Neil Schemenauer <nas@python.ca>
 "		Dmitry Vasiliev
 "
@@ -77,13 +77,14 @@ endif
 "
 " The list can be checked using:
 "
-" python3 -c 'import keyword, pprint; pprint.pprint(keyword.kwlist, compact=True)'
+" python3 -c 'import keyword, pprint; pprint.pprint(keyword.kwlist + keyword.softkwlist, compact=True)'
 "
 syn keyword pythonStatement	False None True
 syn keyword pythonStatement	as assert break continue del global
 syn keyword pythonStatement	lambda nonlocal pass return with yield
 syn keyword pythonStatement	class def nextgroup=pythonFunction skipwhite
 syn keyword pythonConditional	elif else if
+syn keyword pythonConditional	case match
 syn keyword pythonRepeat	for while
 syn keyword pythonOperator	and in is not or
 syn keyword pythonException	except finally raise try

runtime/syntax/routeros.vim

@@ -0,0 +1,91 @@
+" Vim syntax file
+" Language:        MikroTik RouterOS Script
+" Maintainer:      zainin <z@wintr.dev>
+" Original Author: ndbjorne @ MikroTik forums
+" Last Change:     2021 Nov 14
+
+" quit when a syntax file was already loaded
+if exists("b:current_syntax")
+  finish
+endif
+
+syn case ignore
+
+syn iskeyword @,48-57,-
+
+" comments
+syn match   routerosComment      /^\s*\zs#.*/
+
+" options submenus: /interface ether1 etc
+syn match   routerosSubMenu      "\([a-z]\)\@<!/[a-zA-Z0-9-]*"
+
+" variables are matched by looking at strings ending with "=", e.g. var=
+syn match   routerosVariable     "[a-zA-Z0-9-/]*\(=\)\@="
+syn match   routerosVariable     "$[a-zA-Z0-9-]*"
+
+" colored for clarity
+syn match   routerosDelimiter    "[,=]"
+" match slash in CIDR notation (1.2.3.4/24, 2001:db8::/48, ::1/128)
+syn match   routerosDelimiter    "\(\x\|:\)\@<=\/\(\d\)\@="
+" dash in IP ranges
+syn match   routerosDelimiter    "\(\x\|:\)\@<=-\(\x\|:\)\@="
+
+" match service names after "set", like in original routeros syntax
+syn match   routerosService      "\(set\)\@<=\s\(api-ssl\|api\|dns\|ftp\|http\|https\|pim\|ntp\|smb\|ssh\|telnet\|winbox\|www\|www-ssl\)"
+
+" colors various interfaces
+syn match   routerosInterface    "bridge\d\+\|ether\d\+\|wlan\d\+\|pppoe-\(out\|in\)\d\+"
+
+syn keyword routerosBoolean      yes no true false
+
+syn keyword routerosConditional  if
+
+" operators
+syn match   routerosOperator     " \zs[-+*<>=!~^&.,]\ze "
+syn match   routerosOperator     "[<>!]="
+syn match   routerosOperator     "<<\|>>"
+syn match   routerosOperator     "[+-]\d\@="
+
+syn keyword routerosOperator     and or in
+
+" commands
+syn keyword routerosCommands     beep delay put len typeof pick log time set find environment
+syn keyword routerosCommands     terminal error parse resolve toarray tobool toid toip toip6
+syn keyword routerosCommands     tonum tostr totime add remove enable disable where get print
+syn keyword routerosCommands     export edit find append as-value brief detail count-only file
+syn keyword routerosCommands     follow follow-only from interval terse value-list without-paging
+syn keyword routerosCommands     return
+
+" variable types
+syn keyword routerosType         global local
+
+" loop keywords
+syn keyword routerosRepeat       do while for foreach
+
+syn match   routerosSpecial      "[():[\]{|}]"
+
+syn match   routerosLineContinuation "\\$"
+
+syn match   routerosEscape       "\\["\\nrt$?_abfv]" contained display
+syn match   routerosEscape       "\\\x\x"            contained display
+
+syn region  routerosString       start=+"+ skip=+\\\\\|\\"+ end=+"+ contains=routerosEscape,routerosLineContinuation
+
+hi link routerosComment              Comment
+hi link routerosSubMenu              Function
+hi link routerosVariable             Identifier
+hi link routerosDelimiter            Operator
+hi link routerosEscape               Special
+hi link routerosService              Type
+hi link routerosInterface            Type
+hi link routerosBoolean              Boolean
+hi link routerosConditional          Conditional
+hi link routerosOperator             Operator
+hi link routerosCommands             Operator
+hi link routerosType                 Type
+hi link routerosRepeat               Repeat
+hi link routerosSpecial              Delimiter
+hi link routerosString               String
+hi link routerosLineContinuation     Special
+
+let b:current_syntax = "routeros"

runtime/syntax/sh.vim

@@ -2,8 +2,8 @@
 " Language:		shell (sh) Korn shell (ksh) bash (sh)
 " Maintainer:		Charles E. Campbell <NcampObell@SdrPchip.AorgM-NOSPAM>
 " Previous Maintainer:	Lennart Schultz <Lennart.Schultz@ecmwf.int>
-" Last Change:		Feb 18, 2021
-" Version:		198
+" Last Change:		Oct 26, 2021
+" Version:		199
 " URL:		http://www.drchip.org/astronaut/vim/index.html#SYNTAX_SH
 " For options and settings, please use:      :help ft-sh-syntax
 " This file includes many ideas from Eric Brunet (eric.brunet@ens.fr) and heredoc fixes from Felipe Contreras
@@ -147,7 +147,7 @@ if exists("b:is_kornshell") || exists("b:is_bash")
 endif
 syn cluster shCommandSubList	contains=shAlias,shArithmetic,shCmdParenRegion,shCommandSub,shComment,shCtrlSeq,shDeref,shDerefSimple,shDoubleQuote,shEcho,shEscape,shExDoubleQuote,shExpr,shExSingleQuote,shHereDoc,shNumber,shOperator,shOption,shPosnParm,shHereString,shRedir,shSingleQuote,shSpecial,shStatement,shSubSh,shTest,shVariable
 syn cluster shCurlyList	contains=shNumber,shComma,shDeref,shDerefSimple,shDerefSpecial
-" COMBAK: removing shEscape fromshDblQuoteList fails ksh04:43
+" COMBAK: removing shEscape from shDblQuoteList fails ksh04:43
 syn cluster shDblQuoteList	contains=shArithmetic,shCommandSub,shCommandSubBQ,shDeref,shDerefSimple,shPosnParm,shCtrlSeq,shSpecial,shSpecialDQ
 syn cluster shDerefList	contains=shDeref,shDerefSimple,shDerefVar,shDerefSpecial,shDerefWordError,shDerefPSR,shDerefPPS
 syn cluster shDerefVarList	contains=shDerefOffset,shDerefOp,shDerefVarArray,shDerefOpError
@@ -401,7 +401,7 @@ endif
 syn match	shComment		"^\s*\zs#.*$"	contains=@shCommentGroup
 syn match	shComment		"\s\zs#.*$"	contains=@shCommentGroup
 syn match	shComment	contained	"#.*$"	contains=@shCommentGroup
-syn match	shQuickComment	contained	"#.*$"
+syn match	shQuickComment	contained	"#.*$"          contains=@shCommentGroup
 syn match	shBQComment	contained	"#.\{-}\ze`"	contains=@shCommentGroup
 
 " Here Documents: {{{1

runtime/syntax/squirrel.vim

@@ -0,0 +1,50 @@
+" Vim syntax file
+" Language: squirrel
+" Current Maintainer: Matt Dunford (zenmatic@gmail.com)
+" URL: https://github.com/zenmatic/vim-syntax-squirrel
+" Last Change:	2021 Nov 28
+
+" http://squirrel-lang.org/
+
+" quit when a syntax file was already loaded
+if exists("b:current_syntax")
+  finish
+endif
+
+" inform C syntax that the file was included from cpp.vim
+let b:filetype_in_cpp_family = 1
+
+" Read the C syntax to start with
+runtime! syntax/c.vim
+unlet b:current_syntax
+
+" squirrel extensions
+syn keyword squirrelStatement	delete this in yield resume base clone
+syn keyword squirrelAccess	local
+syn keyword cConstant           null
+syn keyword squirrelModifier	static
+syn keyword squirrelType	bool instanceof typeof
+syn keyword squirrelExceptions	throw try catch
+syn keyword squirrelStructure	class function extends constructor
+syn keyword squirrelBoolean	true false
+syn keyword squirrelRepeat	foreach
+
+syn region squirrelMultiString start='@"' end='"$' end='";$'me=e-1
+
+syn match squirrelShComment "^\s*#.*$"
+
+" Default highlighting
+hi def link squirrelAccess		squirrelStatement
+hi def link squirrelExceptions		Exception
+hi def link squirrelStatement		Statement
+hi def link squirrelModifier		Type
+hi def link squirrelType		Type
+hi def link squirrelStructure		Structure
+hi def link squirrelBoolean		Boolean
+hi def link squirrelMultiString		String
+hi def link squirrelRepeat		cRepeat
+hi def link squirrelShComment		Comment
+
+let b:current_syntax = "squirrel"
+
+" vim: ts=8

runtime/syntax/tcl.vim

@@ -6,8 +6,8 @@
 "		(previously Matt Neumann <mattneu@purpleturtle.com>)
 "		(previously Allan Kelly <allan@fruitloaf.co.uk>)
 " Original:	Robin Becker <robin@jessikat.demon.co.uk>
-" Last Change:	2021 Oct 03
-" Version:	1.14
+" Last Change:	2021 Nov 16
+" Version:	1.14 plus improvements from PR #8948
 " URL:		(removed, no longer worked)
 
 " quit when a syntax file was already loaded
@@ -192,18 +192,18 @@ syn region tcltkCommand matchgroup=tcltkCommandColor start="\<lsort\>" matchgrou
 syn keyword tclTodo contained	TODO
 
 " Sequences which are backslash-escaped: http://www.tcl.tk/man/tcl8.5/TclCmd/Tcl.htm#M16
-" Octal, hexadecimal, unicode codepoints, and the classics.
+" Octal, hexadecimal, Unicode codepoints, and the classics.
 " Tcl takes as many valid characters in a row as it can, so \xAZ in a string is newline followed by 'Z'.
-syn match   tclSpecial contained '\\\([0-7]\{1,3}\|x\x\{1,2}\|u\x\{1,4}\|[abfnrtv]\)'
+syn match   tclSpecial contained '\\\(\o\{1,3}\|x\x\{1,2}\|u\x\{1,4}\|[abfnrtv]\)'
 syn match   tclSpecial contained '\\[\[\]\{\}\"\$]'
 
 " Command appearing inside another command or inside a string.
 syn region tclEmbeddedStatement	start='\[' end='\]' contained contains=tclCommand,tclNumber,tclLineContinue,tclString,tclVarRef,tclEmbeddedStatement
 " A string needs the skip argument as it may legitimately contain \".
 " Match at start of line
-syn region  tclString		  start=+^"+ end=+"+ contains=@tclSpecialC skip=+\\\\\|\\"+
+syn region  tclString		  start=+^"+ end=+"+ contains=@tclSpecialC,@Spell skip=+\\\\\|\\"+
 "Match all other legal strings.
-syn region  tclString		  start=+[^\\]"+ms=s+1  end=+"+ contains=@tclSpecialC,@tclVarRefC,tclEmbeddedStatement skip=+\\\\\|\\"+
+syn region  tclString		  start=+[^\\]"+ms=s+1  end=+"+ contains=@tclSpecialC,@tclVarRefC,tclEmbeddedStatement,@Spell skip=+\\\\\|\\"+
 
 " Line continuation is backslash immediately followed by newline.
 syn match tclLineContinue '\\$'
@@ -222,12 +222,12 @@ syn match  tclNumber		"\.\d\+\(e[-+]\=\d\+\)\=[fl]\=\>"
 "floating point number, without dot, with exponent
 syn match  tclNumber		"\<\d\+e[-+]\=\d\+[fl]\=\>"
 "hex number
-syn match  tclNumber		"0x[0-9a-f]\+\(u\=l\=\|lu\)\>"
-"syn match  tclIdentifier	"\<[a-z_][a-z0-9_]*\>"
+syn match  tclNumber		"0x\x\+\(u\=l\=\|lu\)\>"
+"syn match  tclIdentifier	"\<\h\w*\>"
 syn case match
 
-syn region  tclComment		start="^\s*\#" skip="\\$" end="$" contains=tclTodo
-syn region  tclComment		start=/;\s*\#/hs=s+1 skip="\\$" end="$" contains=tclTodo
+syn region  tclComment		start="^\s*\#" skip="\\$" end="$" contains=tclTodo,@Spell
+syn region  tclComment		start=/;\s*\#/hs=s+1 skip="\\$" end="$" contains=tclTodo,@Spell
 
 "syn match tclComment /^\s*\#.*$/
 "syn match tclComment /;\s*\#.*$/hs=s+1

runtime/syntax/texinfo.vim

@@ -1,396 +1,46 @@
 " Vim syntax file
-" Language:	Texinfo (macro package for TeX)
-" Maintainer:	Sandor Kopanyi <sandor.kopanyi@mailbox.hu>
-" URL:		<->
-" Last Change:	2004 Jun 23
-"
-" the file follows the Texinfo manual structure; this file is based
-" on manual for Texinfo version 4.0, 28 September 1999
-" since @ can have special meanings, everything is 'match'-ed and 'region'-ed
-" (including @ in 'iskeyword' option has unexpected effects)
+" Language:         Texinfo (documentation format)
+" Maintainer:       Robert Dodier <robert.dodier@gmail.com>
+" Latest Revision:  2021-12-15
 
-" quit when a syntax file was already loaded
 if exists("b:current_syntax")
   finish
 endif
 
-if !exists("main_syntax")
-  let main_syntax = 'texinfo'
+let s:cpo_save = &cpo
+set cpo&vim
+
+syn match texinfoControlSequence display '\(@end [a-zA-Z@]\+\|@[a-zA-Z@]\+\)'
+
+syn match texinfoComment         display '^\s*\(@comment\|@c\)\>.*$'
+
+syn region texinfoCode matchgroup=texinfoControlSequence start="@code{" end="}" contains=ALL
+syn region texinfoVerb matchgroup=texinfoControlSequence start="@verb{" end="}" contains=ALL
+
+syn region texinfoArgument matchgroup=texinfoBrace start="{" end="}" contains=ALLBUT
+
+syn region texinfoExample matchgroup=texinfoControlSequence start="^@example\s*$" end="^@end example\s*$" contains=ALL
+
+syn region texinfoVerbatim matchgroup=texinfoControlSequence start="^@verbatim\s*$" end="^@end verbatim\s*$"
+
+syn region texinfoMenu matchgroup=texinfoControlSequence start="^@menu\s*$" end="^@end menu\s*$"
+
+if exists("g:texinfo_delimiters")
+  syn match texinfoDelimiter display '[][{}]'
 endif
 
-"in Texinfo can be real big things, like tables; sync for that
-syn sync lines=200
-
-"some general stuff
-"syn match texinfoError     "\S" contained TODO
-syn match texinfoIdent	    "\k\+"		  contained "IDENTifier
-syn match texinfoAssignment "\k\+\s*=\s*\k\+\s*$" contained "assigment statement ( var = val )
-syn match texinfoSinglePar  "\k\+\s*$"		  contained "single parameter (used for several @-commands)
-syn match texinfoIndexPar   "\k\k\s*$"		  contained "param. used for different *index commands (+ @documentlanguage command)
-
-
-"marking words and phrases (chap. 9 in Texinfo manual)
-"(almost) everything appears as 'contained' too; is for tables (@table)
-
-"this chapter is at the beginning of this file to avoid overwritings
-
-syn match texinfoSpecialChar				    "@acronym"		contained
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@acronym{" end="}" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-syn match texinfoSpecialChar				    "@b"		contained
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@b{"	end="}" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-syn match texinfoSpecialChar				    "@cite"		contained
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@cite{"	end="}" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-syn match texinfoSpecialChar				    "@code"		contained
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@code{"	end="}" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-syn match texinfoSpecialChar				    "@command"		contained
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@command{" end="}" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-syn match texinfoSpecialChar				    "@dfn"		contained
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@dfn{"	end="}" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-syn match texinfoSpecialChar				    "@email"		contained
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@email{"	end="}" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-syn match texinfoSpecialChar				    "@emph"		contained
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@emph{"	end="}" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-syn match texinfoSpecialChar				    "@env"		contained
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@env{"	end="}" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-syn match texinfoSpecialChar				    "@file"		contained
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@file{"	end="}" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-syn match texinfoSpecialChar				    "@i"		contained
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@i{"	end="}" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-syn match texinfoSpecialChar				    "@kbd"		contained
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@kbd{"	end="}" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-syn match texinfoSpecialChar				    "@key"		contained
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@key{"	end="}" contains=texinfoSpecialChar
-syn match texinfoSpecialChar				    "@option"		contained
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@option{"	end="}" contains=texinfoSpecialChar
-syn match texinfoSpecialChar				    "@r"		contained
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@r{"	end="}" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-syn match texinfoSpecialChar				    "@samp"		contained
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@samp{"	end="}" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-syn match texinfoSpecialChar				    "@sc"		contained
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@sc{"	end="}" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-syn match texinfoSpecialChar				    "@strong"		contained
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@strong{"	end="}" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-syn match texinfoSpecialChar				    "@t"		contained
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@t{"	end="}" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-syn match texinfoSpecialChar				    "@url"		contained
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@url{"	end="}" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-syn match texinfoSpecialChar				    "@var"		contained
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@var{"	end="}" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-syn match texinfoAtCmd "^@kbdinputstyle" nextgroup=texinfoSinglePar skipwhite
-
-
-"overview of Texinfo (chap. 1 in Texinfo manual)
-syn match texinfoComment  "@c .*"
-syn match texinfoComment  "@c$"
-syn match texinfoComment  "@comment .*"
-syn region texinfoMltlnAtCmd matchgroup=texinfoComment start="^@ignore\s*$" end="^@end ignore\s*$" contains=ALL
-
-
-"beginning a Texinfo file (chap. 3 in Texinfo manual)
-syn region texinfoPrmAtCmd     matchgroup=texinfoAtCmd start="@center "		 skip="\\$" end="$"		       contains=texinfoSpecialChar,texinfoBrcPrmAtCmd oneline
-syn region texinfoMltlnDMAtCmd matchgroup=texinfoAtCmd start="^@detailmenu\s*$"		    end="^@end detailmenu\s*$" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-syn region texinfoPrmAtCmd     matchgroup=texinfoAtCmd start="^@setfilename "    skip="\\$" end="$" contains=texinfoSpecialChar oneline
-syn region texinfoPrmAtCmd     matchgroup=texinfoAtCmd start="^@settitle "       skip="\\$" end="$" contains=texinfoSpecialChar oneline
-syn region texinfoPrmAtCmd     matchgroup=texinfoAtCmd start="^@shorttitlepage " skip="\\$" end="$" contains=texinfoSpecialChar oneline
-syn region texinfoPrmAtCmd     matchgroup=texinfoAtCmd start="^@title "		 skip="\\$" end="$" contains=texinfoSpecialChar oneline
-syn region texinfoBrcPrmAtCmd  matchgroup=texinfoAtCmd start="@titlefont{"		    end="}" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-syn region texinfoMltlnAtCmd   matchgroup=texinfoAtCmd start="^@titlepage\s*$"		    end="^@end titlepage\s*$" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd,texinfoMltlnDMAtCmd,texinfoAtCmd,texinfoPrmAtCmd,texinfoMltlnAtCmd
-syn region texinfoPrmAtCmd     matchgroup=texinfoAtCmd start="^@vskip "		 skip="\\$" end="$" contains=texinfoSpecialChar oneline
-syn match texinfoAtCmd "^@exampleindent"     nextgroup=texinfoSinglePar skipwhite
-syn match texinfoAtCmd "^@headings"	     nextgroup=texinfoSinglePar skipwhite
-syn match texinfoAtCmd "^\\input"	     nextgroup=texinfoSinglePar skipwhite
-syn match texinfoAtCmd "^@paragraphindent"   nextgroup=texinfoSinglePar skipwhite
-syn match texinfoAtCmd "^@setchapternewpage" nextgroup=texinfoSinglePar skipwhite
-
-
-"ending a Texinfo file (chap. 4 in Texinfo manual)
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="@author " skip="\\$" end="$" contains=texinfoSpecialChar oneline
-"all below @bye should be comment TODO
-syn match texinfoAtCmd "^@bye\s*$"
-syn match texinfoAtCmd "^@contents\s*$"
-syn match texinfoAtCmd "^@printindex" nextgroup=texinfoIndexPar skipwhite
-syn match texinfoAtCmd "^@setcontentsaftertitlepage\s*$"
-syn match texinfoAtCmd "^@setshortcontentsaftertitlepage\s*$"
-syn match texinfoAtCmd "^@shortcontents\s*$"
-syn match texinfoAtCmd "^@summarycontents\s*$"
-
-
-"chapter structuring (chap. 5 in Texinfo manual)
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@appendix"		 skip="\\$" end="$" contains=texinfoSpecialChar oneline
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@appendixsec"	 skip="\\$" end="$" contains=texinfoSpecialChar oneline
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@appendixsection"	 skip="\\$" end="$" contains=texinfoSpecialChar oneline
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@appendixsubsec"	 skip="\\$" end="$" contains=texinfoSpecialChar oneline
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@appendixsubsubsec"	 skip="\\$" end="$" contains=texinfoSpecialChar oneline
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@centerchap"		 skip="\\$" end="$" contains=texinfoSpecialChar oneline
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@chapheading"	 skip="\\$" end="$" contains=texinfoSpecialChar oneline
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@chapter"		 skip="\\$" end="$" contains=texinfoSpecialChar oneline
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@heading"		 skip="\\$" end="$" contains=texinfoSpecialChar oneline
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@majorheading"	 skip="\\$" end="$" contains=texinfoSpecialChar oneline
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@section"		 skip="\\$" end="$" contains=texinfoSpecialChar oneline
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@subheading "	 skip="\\$" end="$" contains=texinfoSpecialChar oneline
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@subsection"		 skip="\\$" end="$" contains=texinfoSpecialChar oneline
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@subsubheading"	 skip="\\$" end="$" contains=texinfoSpecialChar oneline
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@subsubsection"	 skip="\\$" end="$" contains=texinfoSpecialChar oneline
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@subtitle"		 skip="\\$" end="$" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd oneline
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@unnumbered"		 skip="\\$" end="$" contains=texinfoSpecialChar oneline
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@unnumberedsec"	 skip="\\$" end="$" contains=texinfoSpecialChar oneline
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@unnumberedsubsec"	 skip="\\$" end="$" contains=texinfoSpecialChar oneline
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@unnumberedsubsubsec" skip="\\$" end="$" contains=texinfoSpecialChar oneline
-syn match  texinfoAtCmd "^@lowersections\s*$"
-syn match  texinfoAtCmd "^@raisesections\s*$"
-
-
-"nodes (chap. 6 in Texinfo manual)
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@anchor{"		  end="}"
-syn region texinfoPrmAtCmd    matchgroup=texinfoAtCmd start="^@top"    skip="\\$" end="$" contains=texinfoSpecialChar oneline
-syn region texinfoPrmAtCmd    matchgroup=texinfoAtCmd start="^@node"   skip="\\$" end="$" contains=texinfoSpecialChar oneline
-
-
-"menus (chap. 7 in Texinfo manual)
-syn region texinfoMltlnAtCmd matchgroup=texinfoAtCmd start="^@menu\s*$" end="^@end menu\s*$" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd,texinfoMltlnDMAtCmd
-
-
-"cross references (chap. 8 in Texinfo manual)
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@inforef{" end="}" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@pxref{"   end="}" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@ref{"     end="}" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@uref{"    end="}" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@xref{"    end="}" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-
-
-"marking words and phrases (chap. 9 in Texinfo manual)
-"(almost) everything appears as 'contained' too; is for tables (@table)
-
-"this chapter is at the beginning of this file to avoid overwritings
-
-
-"quotations and examples (chap. 10 in Texinfo manual)
-syn region texinfoMltlnAtCmd matchgroup=texinfoAtCmd start="^@cartouche\s*$"	    end="^@end cartouche\s*$"	    contains=ALL
-syn region texinfoMltlnAtCmd matchgroup=texinfoAtCmd start="^@display\s*$"	    end="^@end display\s*$"	    contains=ALL
-syn region texinfoMltlnAtCmd matchgroup=texinfoAtCmd start="^@example\s*$"	    end="^@end example\s*$"	    contains=ALL
-syn region texinfoMltlnAtCmd matchgroup=texinfoAtCmd start="^@flushleft\s*$"	    end="^@end flushleft\s*$"	    contains=ALL
-syn region texinfoMltlnAtCmd matchgroup=texinfoAtCmd start="^@flushright\s*$"	    end="^@end flushright\s*$"	    contains=ALL
-syn region texinfoMltlnAtCmd matchgroup=texinfoAtCmd start="^@format\s*$"	    end="^@end format\s*$"	    contains=ALL
-syn region texinfoMltlnAtCmd matchgroup=texinfoAtCmd start="^@lisp\s*$"		    end="^@end lisp\s*$"	    contains=ALL
-syn region texinfoMltlnAtCmd matchgroup=texinfoAtCmd start="^@quotation\s*$"	    end="^@end quotation\s*$"	    contains=ALL
-syn region texinfoMltlnAtCmd matchgroup=texinfoAtCmd start="^@smalldisplay\s*$"     end="^@end smalldisplay\s*$"    contains=ALL
-syn region texinfoMltlnAtCmd matchgroup=texinfoAtCmd start="^@smallexample\s*$"     end="^@end smallexample\s*$"    contains=ALL
-syn region texinfoMltlnAtCmd matchgroup=texinfoAtCmd start="^@smallformat\s*$"	    end="^@end smallformat\s*$"     contains=ALL
-syn region texinfoMltlnAtCmd matchgroup=texinfoAtCmd start="^@smalllisp\s*$"	    end="^@end smalllisp\s*$"	    contains=ALL
-syn region texinfoPrmAtCmd   matchgroup=texinfoAtCmd start="^@exdent"	 skip="\\$" end="$"			    contains=texinfoSpecialChar oneline
-syn match texinfoAtCmd "^@noindent\s*$"
-syn match texinfoAtCmd "^@smallbook\s*$"
-
-
-"lists and tables (chap. 11 in Texinfo manual)
-syn match texinfoAtCmd "@asis"		   contained
-syn match texinfoAtCmd "@columnfractions"  contained
-syn match texinfoAtCmd "@item"		   contained
-syn match texinfoAtCmd "@itemx"		   contained
-syn match texinfoAtCmd "@tab"		   contained
-syn region texinfoMltlnAtCmd  matchgroup=texinfoAtCmd start="^@enumerate"  end="^@end enumerate\s*$"  contains=ALL
-syn region texinfoMltlnAtCmd  matchgroup=texinfoAtCmd start="^@ftable"     end="^@end ftable\s*$"     contains=ALL
-syn region texinfoMltlnNAtCmd matchgroup=texinfoAtCmd start="^@itemize"    end="^@end itemize\s*$"    contains=ALL
-syn region texinfoMltlnNAtCmd matchgroup=texinfoAtCmd start="^@multitable" end="^@end multitable\s*$" contains=ALL
-syn region texinfoMltlnNAtCmd matchgroup=texinfoAtCmd start="^@table"      end="^@end table\s*$"      contains=ALL
-syn region texinfoMltlnAtCmd  matchgroup=texinfoAtCmd start="^@vtable"     end="^@end vtable\s*$"     contains=ALL
-
-
-"indices (chap. 12 in Texinfo manual)
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@\(c\|f\|k\|p\|t\|v\)index"   skip="\\$" end="$" contains=texinfoSpecialChar oneline
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@..index"			 skip="\\$" end="$" contains=texinfoSpecialChar oneline
-"@defcodeindex and @defindex is defined after chap. 15's @def* commands (otherwise those ones will overwrite these ones)
-syn match texinfoSIPar "\k\k\s*\k\k\s*$" contained
-syn match texinfoAtCmd "^@syncodeindex" nextgroup=texinfoSIPar skipwhite
-syn match texinfoAtCmd "^@synindex"     nextgroup=texinfoSIPar skipwhite
-
-"special insertions (chap. 13 in Texinfo manual)
-syn match texinfoSpecialChar "@\(!\|?\|@\|\s\)"
-syn match texinfoSpecialChar "@{"
-syn match texinfoSpecialChar "@}"
-"accents
-syn match texinfoSpecialChar "@=."
-syn match texinfoSpecialChar "@\('\|\"\|\^\|`\)[aeiouyAEIOUY]"
-syn match texinfoSpecialChar "@\~[aeinouyAEINOUY]"
-syn match texinfoSpecialChar "@dotaccent{.}"
-syn match texinfoSpecialChar "@H{.}"
-syn match texinfoSpecialChar "@,{[cC]}"
-syn match texinfoSpecialChar "@AA{}"
-syn match texinfoSpecialChar "@aa{}"
-syn match texinfoSpecialChar "@L{}"
-syn match texinfoSpecialChar "@l{}"
-syn match texinfoSpecialChar "@O{}"
-syn match texinfoSpecialChar "@o{}"
-syn match texinfoSpecialChar "@ringaccent{.}"
-syn match texinfoSpecialChar "@tieaccent{..}"
-syn match texinfoSpecialChar "@u{.}"
-syn match texinfoSpecialChar "@ubaraccent{.}"
-syn match texinfoSpecialChar "@udotaccent{.}"
-syn match texinfoSpecialChar "@v{.}"
-"ligatures
-syn match texinfoSpecialChar "@AE{}"
-syn match texinfoSpecialChar "@ae{}"
-syn match texinfoSpecialChar "@copyright{}"
-syn match texinfoSpecialChar "@bullet" contained "for tables and lists
-syn match texinfoSpecialChar "@bullet{}"
-syn match texinfoSpecialChar "@dotless{i}"
-syn match texinfoSpecialChar "@dotless{j}"
-syn match texinfoSpecialChar "@dots{}"
-syn match texinfoSpecialChar "@enddots{}"
-syn match texinfoSpecialChar "@equiv" contained "for tables and lists
-syn match texinfoSpecialChar "@equiv{}"
-syn match texinfoSpecialChar "@error{}"
-syn match texinfoSpecialChar "@exclamdown{}"
-syn match texinfoSpecialChar "@expansion{}"
-syn match texinfoSpecialChar "@minus" contained "for tables and lists
-syn match texinfoSpecialChar "@minus{}"
-syn match texinfoSpecialChar "@OE{}"
-syn match texinfoSpecialChar "@oe{}"
-syn match texinfoSpecialChar "@point" contained "for tables and lists
-syn match texinfoSpecialChar "@point{}"
-syn match texinfoSpecialChar "@pounds{}"
-syn match texinfoSpecialChar "@print{}"
-syn match texinfoSpecialChar "@questiondown{}"
-syn match texinfoSpecialChar "@result" contained "for tables and lists
-syn match texinfoSpecialChar "@result{}"
-syn match texinfoSpecialChar "@ss{}"
-syn match texinfoSpecialChar "@TeX{}"
-"other
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@dmn{"      end="}"
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@footnote{" end="}" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@image{"    end="}"
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@math{"     end="}"
-syn match texinfoAtCmd "@footnotestyle" nextgroup=texinfoSinglePar skipwhite
-
-
-"making and preventing breaks (chap. 14 in Texinfo manual)
-syn match texinfoSpecialChar  "@\(\*\|-\|\.\)"
-syn match texinfoAtCmd	      "^@need"	   nextgroup=texinfoSinglePar skipwhite
-syn match texinfoAtCmd	      "^@page\s*$"
-syn match texinfoAtCmd	      "^@sp"	   nextgroup=texinfoSinglePar skipwhite
-syn region texinfoMltlnAtCmd  matchgroup=texinfoAtCmd start="^@group\s*$"   end="^@end group\s*$" contains=ALL
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@hyphenation{" end="}"
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@w{"	    end="}"		  contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-
-
-"definition commands (chap. 15 in Texinfo manual)
-syn match texinfoMltlnAtCmdFLine "^@def\k\+" contained
-syn region texinfoMltlnAtCmd matchgroup=texinfoAtCmd start="^@def\k\+" end="^@end def\k\+$"      contains=ALL
-
-"next 2 commands are from chap. 12; must be defined after @def* commands above to overwrite them
-syn match texinfoAtCmd "@defcodeindex" nextgroup=texinfoIndexPar skipwhite
-syn match texinfoAtCmd "@defindex" nextgroup=texinfoIndexPar skipwhite
-
-
-"conditionally visible text (chap. 16 in Texinfo manual)
-syn match texinfoAtCmd "^@clear" nextgroup=texinfoSinglePar skipwhite
-syn region texinfoMltln2AtCmd matchgroup=texinfoAtCmd start="^@html\s*$"	end="^@end html\s*$"
-syn region texinfoMltlnAtCmd  matchgroup=texinfoAtCmd start="^@ifclear"		end="^@end ifclear\s*$"   contains=ALL
-syn region texinfoMltlnAtCmd  matchgroup=texinfoAtCmd start="^@ifhtml"		end="^@end ifhtml\s*$"	  contains=ALL
-syn region texinfoMltlnAtCmd  matchgroup=texinfoAtCmd start="^@ifinfo"		end="^@end ifinfo\s*$"	  contains=ALL
-syn region texinfoMltlnAtCmd  matchgroup=texinfoAtCmd start="^@ifnothtml"	end="^@end ifnothtml\s*$" contains=ALL
-syn region texinfoMltlnAtCmd  matchgroup=texinfoAtCmd start="^@ifnotinfo"	end="^@end ifnotinfo\s*$" contains=ALL
-syn region texinfoMltlnAtCmd  matchgroup=texinfoAtCmd start="^@ifnottex"	end="^@end ifnottex\s*$"  contains=ALL
-syn region texinfoMltlnAtCmd  matchgroup=texinfoAtCmd start="^@ifset"		end="^@end ifset\s*$"	  contains=ALL
-syn region texinfoMltlnAtCmd  matchgroup=texinfoAtCmd start="^@iftex"		end="^@end iftex\s*$"	  contains=ALL
-syn region texinfoPrmAtCmd    matchgroup=texinfoAtCmd start="^@set " skip="\\$" end="$" contains=texinfoSpecialChar oneline
-syn region texinfoTexCmd			      start="\$\$"		end="\$\$" contained
-syn region texinfoMltlnAtCmd  matchgroup=texinfoAtCmd start="^@tex"		end="^@end tex\s*$"	  contains=texinfoTexCmd
-syn region texinfoBrcPrmAtCmd matchgroup=texinfoAtCmd start="@value{"		end="}" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-
-
-"internationalization (chap. 17 in Texinfo manual)
-syn match texinfoAtCmd "@documentencoding" nextgroup=texinfoSinglePar skipwhite
-syn match texinfoAtCmd "@documentlanguage" nextgroup=texinfoIndexPar skipwhite
-
-
-"defining new texinfo commands (chap. 18 in Texinfo manual)
-syn match texinfoAtCmd	"@alias"		      nextgroup=texinfoAssignment skipwhite
-syn match texinfoDIEPar "\S*\s*,\s*\S*\s*,\s*\S*\s*$" contained
-syn match texinfoAtCmd	"@definfoenclose"	      nextgroup=texinfoDIEPar	  skipwhite
-syn region texinfoMltlnAtCmd matchgroup=texinfoAtCmd start="^@macro" end="^@end macro\s*$" contains=ALL
-
-
-"formatting hardcopy (chap. 19 in Texinfo manual)
-syn match texinfoAtCmd "^@afourlatex\s*$"
-syn match texinfoAtCmd "^@afourpaper\s*$"
-syn match texinfoAtCmd "^@afourwide\s*$"
-syn match texinfoAtCmd "^@finalout\s*$"
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@pagesizes" end="$" oneline
-
-
-"creating and installing Info Files (chap. 20 in Texinfo manual)
-syn region texinfoPrmAtCmd   matchgroup=texinfoAtCmd start="^@dircategory"  skip="\\$" end="$" oneline
-syn region texinfoMltlnAtCmd matchgroup=texinfoAtCmd start="^@direntry\s*$"	       end="^@end direntry\s*$" contains=texinfoSpecialChar
-syn match  texinfoAtCmd "^@novalidate\s*$"
-
-
-"include files (appendix E in Texinfo manual)
-syn match texinfoAtCmd "^@include" nextgroup=texinfoSinglePar skipwhite
-
-
-"page headings (appendix F in Texinfo manual)
-syn match texinfoHFSpecialChar "@|"		  contained
-syn match texinfoThisAtCmd     "@thischapter"	  contained
-syn match texinfoThisAtCmd     "@thischaptername" contained
-syn match texinfoThisAtCmd     "@thisfile"	  contained
-syn match texinfoThisAtCmd     "@thispage"	  contained
-syn match texinfoThisAtCmd     "@thistitle"	  contained
-syn match texinfoThisAtCmd     "@today{}"	  contained
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@evenfooting"  skip="\\$" end="$" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd,texinfoThisAtCmd,texinfoHFSpecialChar oneline
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@evenheading"  skip="\\$" end="$" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd,texinfoThisAtCmd,texinfoHFSpecialChar oneline
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@everyfooting" skip="\\$" end="$" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd,texinfoThisAtCmd,texinfoHFSpecialChar oneline
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@everyheading" skip="\\$" end="$" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd,texinfoThisAtCmd,texinfoHFSpecialChar oneline
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@oddfooting"   skip="\\$" end="$" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd,texinfoThisAtCmd,texinfoHFSpecialChar oneline
-syn region texinfoPrmAtCmd matchgroup=texinfoAtCmd start="^@oddheading"   skip="\\$" end="$" contains=texinfoSpecialChar,texinfoBrcPrmAtCmd,texinfoThisAtCmd,texinfoHFSpecialChar oneline
-
-
-"refilling paragraphs (appendix H in Texinfo manual)
-syn match  texinfoAtCmd "@refill"
-
-
-syn cluster texinfoAll contains=ALLBUT,texinfoThisAtCmd,texinfoHFSpecialChar
-syn cluster texinfoReducedAll contains=texinfoSpecialChar,texinfoBrcPrmAtCmd
-"==============================================================================
-" highlighting
-
-" Only when an item doesn't have highlighting yet
-
-hi def link texinfoSpecialChar	Special
-hi def link texinfoHFSpecialChar	Special
-
-hi def link texinfoError		Error
-hi def link texinfoIdent		Identifier
-hi def link texinfoAssignment	Identifier
-hi def link texinfoSinglePar	Identifier
-hi def link texinfoIndexPar	Identifier
-hi def link texinfoSIPar		Identifier
-hi def link texinfoDIEPar		Identifier
-hi def link texinfoTexCmd		PreProc
-
-
-hi def link texinfoAtCmd		Statement	"@-command
-hi def link texinfoPrmAtCmd	String		"@-command in one line with unknown nr. of parameters
-					      "is String because is found as a region and is 'matchgroup'-ed
-					      "to texinfoAtCmd
-hi def link texinfoBrcPrmAtCmd	String		"@-command with parameter(s) in braces ({})
-					      "is String because is found as a region and is 'matchgroup'-ed to texinfoAtCmd
-hi def link texinfoMltlnAtCmdFLine  texinfoAtCmd	"repeated embedded First lines in @-commands
-hi def link texinfoMltlnAtCmd	String		"@-command in multiple lines
-					      "is String because is found as a region and is 'matchgroup'-ed to texinfoAtCmd
-hi def link texinfoMltln2AtCmd	PreProc		"@-command in multiple lines (same as texinfoMltlnAtCmd, just with other colors)
-hi def link texinfoMltlnDMAtCmd	PreProc		"@-command in multiple lines (same as texinfoMltlnAtCmd, just with other colors; used for @detailmenu, which can be included in @menu)
-hi def link texinfoMltlnNAtCmd	Normal		"@-command in multiple lines (same as texinfoMltlnAtCmd, just with other colors)
-hi def link texinfoThisAtCmd	Statement	"@-command used in headers and footers (@this... series)
-
-hi def link texinfoComment	Comment
-
-
+hi def link texinfoDelimiter       Delimiter
+hi def link texinfoComment         Comment
+hi def link texinfoControlSequence Identifier
+hi def link texinfoBrace           Operator
+hi def link texinfoArgument        Special
+hi def link texinfoExample         String
+hi def link texinfoVerbatim        String
+hi def link texinfoVerb            String
+hi def link texinfoCode            String
+hi def link texinfoMenu            String
 
 let b:current_syntax = "texinfo"
 
-if main_syntax == 'texinfo'
-  unlet main_syntax
-endif
-
-" vim: ts=8
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/syntax/vb.vim

@@ -1,9 +1,11 @@
 " Vim syntax file
-" Language:	Visual Basic
-" Maintainer:	Tim Chase <vb.vim@tim.thechases.com>
-" Former Maintainer:	Robert M. Cortopassi <cortopar@mindspring.com>
-"	(tried multiple times to contact, but email bounced)
+" Language:     Visual Basic
+" Maintainer:   Doug Kearns <dougkearns@gmail.com>
+" Former Maintainer:    Tim Chase <vb.vim@tim.thechases.com>
+" Former Maintainer:    Robert M. Cortopassi <cortopar@mindspring.com>
+"       (tried multiple times to contact, but email bounced)
 " Last Change:
+"   2021 Nov 26  Incorporated additions from Doug Kearns
 "   2005 May 25  Synched with work by Thomas Barthel
 "   2004 May 30  Added a few keywords
 
@@ -13,7 +15,7 @@
 
 " quit when a syntax file was already loaded
 if exists("b:current_syntax")
-	finish
+        finish
 endif
 
 " VB is case insensitive
@@ -233,7 +235,7 @@ syn keyword vbKeyword Public PublicNotCreateable OnNewProcessSingleUse
 syn keyword vbKeyword InSameProcessMultiUse GlobalMultiUse Resume Seek
 syn keyword vbKeyword Set Static Step String Time WithEvents
 
-syn keyword vbTodo contained	TODO
+syn keyword vbTodo contained    TODO
 
 "Datatypes
 syn keyword vbTypes Boolean Byte Currency Date Decimal Double Empty
@@ -319,46 +321,54 @@ syn match vbNumber "\<\d\+\>"
 syn match vbNumber "\<\d\+\.\d*\>"
 "floating point number, starting with a dot
 syn match vbNumber "\.\d\+\>"
-"syn match  vbNumber		"{[[:xdigit:]-]\+}\|&[hH][[:xdigit:]]\+&"
-"syn match  vbNumber		":[[:xdigit:]]\+"
-"syn match  vbNumber		"[-+]\=\<\d\+\>"
-syn match  vbFloat		"[-+]\=\<\d\+[eE][\-+]\=\d\+"
-syn match  vbFloat		"[-+]\=\<\d\+\.\d*\([eE][\-+]\=\d\+\)\="
-syn match  vbFloat		"[-+]\=\<\.\d\+\([eE][\-+]\=\d\+\)\="
+"syn match  vbNumber            "{[[:xdigit:]-]\+}\|&[hH][[:xdigit:]]\+&"
+"syn match  vbNumber            ":[[:xdigit:]]\+"
+"syn match  vbNumber            "[-+]\=\<\d\+\>"
+syn match  vbFloat              "[-+]\=\<\d\+[eE][\-+]\=\d\+"
+syn match  vbFloat              "[-+]\=\<\d\+\.\d*\([eE][\-+]\=\d\+\)\="
+syn match  vbFloat              "[-+]\=\<\.\d\+\([eE][\-+]\=\d\+\)\="
 
-" String and Character contstants
+" String and Character constants
 syn region  vbString		start=+"+  end=+"\|$+
 syn region  vbComment		start="\(^\|\s\)REM\s" end="$" contains=vbTodo
 syn region  vbComment		start="\(^\|\s\)\'"   end="$" contains=vbTodo
-syn match   vbLineNumber	"^\d\+\(\s\|$\)"
-syn match   vbTypeSpecifier  "[a-zA-Z0-9][\$%&!#]"ms=s+1
+syn match   vbLineLabel		"^\h\w\+:"
+syn match   vbLineNumber	"^\d\+\(:\|\s\|$\)"
+syn match   vbTypeSpecifier  "\<\a\w*[@\$%&!#]"ms=s+1
 syn match   vbTypeSpecifier  "#[a-zA-Z0-9]"me=e-1
+" Conditional Compilation
+syn match  vbPreProc "^#const\>"
+syn region vbPreProc matchgroup=PreProc start="^#if\>"     end="\<then\>" transparent contains=TOP
+syn region vbPreProc matchgroup=PreProc start="^#elseif\>" end="\<then\>" transparent contains=TOP
+syn match  vbPreProc "^#else\>"
+syn match  vbPreProc "^#end\s*if\>"
 
 " Define the default highlighting.
 " Only when an item doesn't have highlighting yet
 
-hi def link vbBoolean		Boolean
-hi def link vbLineNumber		Comment
-hi def link vbComment		Comment
-hi def link vbConditional	Conditional
-hi def link vbConst			Constant
-hi def link vbDefine			Constant
-hi def link vbError			Error
-hi def link vbFunction		Identifier
-hi def link vbIdentifier		Identifier
-hi def link vbNumber			Number
-hi def link vbFloat			Float
-hi def link vbMethods		PreProc
-hi def link vbOperator		Operator
-hi def link vbRepeat			Repeat
-hi def link vbString			String
-hi def link vbStatement		Statement
-hi def link vbKeyword		Statement
-hi def link vbEvents			Special
-hi def link vbTodo			Todo
-hi def link vbTypes			Type
-hi def link vbTypeSpecifier	Type
-
+hi def link vbBoolean           Boolean
+hi def link vbLineNumber        Comment
+hi def link vbLineLabel         Comment
+hi def link vbComment           Comment
+hi def link vbConditional       Conditional
+hi def link vbConst             Constant
+hi def link vbDefine            Constant
+hi def link vbError             Error
+hi def link vbFunction          Identifier
+hi def link vbIdentifier        Identifier
+hi def link vbNumber            Number
+hi def link vbFloat             Float
+hi def link vbMethods           PreProc
+hi def link vbOperator          Operator
+hi def link vbRepeat            Repeat
+hi def link vbString            String
+hi def link vbStatement         Statement
+hi def link vbKeyword           Statement
+hi def link vbEvents            Special
+hi def link vbTodo              Todo
+hi def link vbTypes             Type
+hi def link vbTypeSpecifier     Type
+hi def link vbPreProc           PreProc
 
 let b:current_syntax = "vb"
 

runtime/syntax/vim.vim

@@ -1,8 +1,8 @@
 " Vim syntax file
 " Language:	Vim 8.2 script
 " Maintainer:	Charles E. Campbell <NcampObell@SdrPchip.AorgM-NOSPAM>
-" Last Change:	September 21, 2021
-" Version:	8.2-07
+" Last Change:	December 11, 2021
+" Version:	8.2-19
 " URL:	http://www.drchip.org/astronaut/vim/index.html#SYNTAX_VIM
 " Automatically generated keyword lists: {{{1
 
@@ -10,7 +10,7 @@
 if exists("b:current_syntax")
   finish
 endif
-let s:keepcpo = &cpo
+let s:keepcpo= &cpo
 set cpo&vim
 
 " vimTodo: contains common special-notices for comments {{{2
@@ -19,24 +19,24 @@ syn keyword vimTodo contained	COMBAK	FIXME	TODO	XXX
 syn cluster vimCommentGroup	contains=vimTodo,@Spell
 
 " regular vim commands {{{2
-syn keyword vimCommand contained	a ar[gs] argl[ocal] ba[ll] bl[ast] brea[k] buffers ca caf[ter] cbo[ttom] cex[pr] cgete[xpr] cl[ist] cn[ext] colo[rscheme] cons[t] cs d[elete] delel delf[unction] dif[fupdate] difft[his] dli[st] ds[earch] echoc[onsole] em[enu] endw[hile] export filt[er] fo[ld] fu[nction] gvim helpt[ags] iabc[lear] import isp[lit] keepa l[ist] laf[ter] lbel[ow] lcscope lf[ile] lgr[ep] lli[st] lnf[ile] lol[der] lt[ag] lw[indow] menut[ranslate] mkvie[w] nbc[lose] noh[lsearch] ol[dfiles] pa[ckadd] po[p] prof[ile] pta[g] ptr[ewind] py3f[ile] pythonx quita[ll] redraws[tatus] rew[ind] rubyf[ile] sIg sa[rgument] sba[ll] sbr[ewind] scl scscope sfir[st] sgl sic sin sm[ap] snoreme spelld[ump] spellw[rong] srg sta[g] sts[elect] sus[pend] syncbind tabN[ext] tabl[ast] tabr[ewind] tcld[o] tj[ump] tlu tno[remap] tu[nmenu] undol[ist] v vie[w] viu[sage] wa[ll] winp[os] wundo xme xr[estore]
-syn keyword vimCommand contained	ab arga[dd] argu[ment] bad[d] bm[odified] breaka[dd] bun[load] cabc[lear] cal[l] cc cf[ile] changes cla[st] cnew[er] com cope[n] cscope debug delep dell diffg[et] dig[raphs] do dsp[lit] echoe[rr] en[dif] ene[w] exu[sage] fin[d] foldc[lose] g h[elp] hi if in iuna[bbrev] keepalt la[st] lan[guage] lbo[ttom] ld[o] lfdo lgrepa[dd] lma lo[adview] lop[en] lua m[ove] mes[sages] mod[e] nbs[tart] nor omapc[lear] packl[oadall] popu[p] profd[el] ptf[irst] pts[elect] py3f[ile] pyx r[ead] redrawt[abline] ri[ght] rundo sIl sal[l] sbf[irst] sc scp se[t] sg sgn sie sip sme snoremenu spelli[nfo] spr[evious] sri star[tinsert] substitutepattern sv[iew] syntime tabc[lose] tabm[ove] tabs tclf[ile] tl[ast] tlunmenu to[pleft] tunma[p] unh[ide] var vim9[cmd] vne[w] wh[ile] wn[ext] wv[iminfo] xmenu xunme
-syn keyword vimCommand contained	abc[lear] argd[elete] as[cii] balt bn[ext] breakd[el] bw[ipeout] cabo[ve] cat[ch] ccl[ose] cfdo chd[ir] class cnf[ile] comc[lear] cp[revious] cstag debugg[reedy] deletel delm[arks] diffo[ff] dir doau e[dit] echom[sg] enddef eval f[ile] fina[lly] foldd[oopen] go[to] ha[rdcopy] hid[e] ij[ump] inor j[oin] keepj[umps] lab[ove] lat lc[d] le[ft] lfir[st] lh[elpgrep] lmak[e] loadk lp[revious] luado ma[rk] mk[exrc] mz[scheme] new nore on[ly] pc[lose] pp[op] promptf[ind] ptj[ump] pu[t] py[thon] pyxdo rec[over] reg[isters] rightb[elow] rv[iminfo] sIn san[dbox] sbl[ast] scI scr[iptnames] setf[iletype] sgI sgp sig sir smenu so[urce] spellr[are] sr srl startg[replace] substituterepeat sw[apname] t tabd[o] tabn[ext] tags te[aroff] tlm tm[enu] tp[revious] type unl ve[rsion] vim9s[cript] vs[plit] win[size] wp[revious] x[it] xnoreme xunmenu
-syn keyword vimCommand contained	abo[veleft] argdo au bd[elete] bo[tright] breakl[ist] cN[ext] cad[dbuffer] cb[uffer] cd cfir[st] che[ckpath] cle[arjumps] cnor comp[iler] cpf[ile] cun def deletep delp diffp[atch] disa[ssemble] doaut ea echon endf[unction] ex files fini[sh] folddoc[losed] gr[ep] helpc[lose] his[tory] il[ist] interface ju[mps] keepp[atterns] lad[dexpr] later lch[dir] lefta[bove] lg[etfile] lhi[story] lmapc[lear] loadkeymap lpf[ile] luafile mak[e] mks[ession] mzf[ile] nmapc[lear] nos[wapfile] opt[ions] pe[rl] pre[serve] promptr[epl] ptl[ast] pw[d] pydo pyxfile red[o] res[ize] ru[ntime] sI sIp sav[eas] sbm[odified] sce scripte[ncoding] setg[lobal] sgc sgr sign sl[eep] smile sor[t] spellr[epall] srI srn startr[eplace] sun[hide] sy tN[ext] tabe[dit] tabnew tc[d] ter[minal] tlmenu tma[p] tr[ewind] u[ndo] unlo[ckvar] verb[ose] vim[grep] wN[ext] winc[md] wq xa[ll] xnoremenu xwininfo
-syn keyword vimCommand contained	addd arge[dit] bN[ext] bel[owright] bp[revious] bro[wse] cNf[ile] cadde[xpr] cbe[fore] cdo cg[etfile] checkt[ime] clo[se] co[py] con[tinue] cq[uit] cuna[bbrev] defc[ompile] deletl dep diffpu[t] dj[ump] dp earlier el[se] endfo[r] exi[t] filet fir[st] foldo[pen] grepa[dd] helpf[ind] i imapc[lear] intro k lN[ext] laddb[uffer] lb[uffer] lcl[ose] leg[acy] lgetb[uffer] ll lne[xt] loc[kmarks] lr[ewind] lv[imgrep] marks mksp[ell] n[ext] noa nu[mber] ownsyntax ped[it] prev[ious] ps[earch] ptn[ext] py3 pyf[ile] q[uit] redi[r] ret[ab] rub[y] sIc sIr sbN[ext] sbn[ext] scg scriptv[ersion] setl[ocal] sge sh[ell] sil[ent] sla[st] sn[ext] sp[lit] spellr[rare] src srp stj[ump] sunme syn ta[g] tabf[ind] tabo[nly] tch[dir] tf[irst] tln tmapc[lear] try una[bbreviate] uns[ilent] vert[ical] vimgrepa[dd] w[rite] windo wqa[ll] xmapc[lear] xprop y[ank]
-syn keyword vimCommand contained	al[l] argg[lobal] b[uffer] bf[irst] br[ewind] bufdo c[hange] caddf[ile] cbel[ow] ce[nter] cgetb[uffer] chi[story] cmapc[lear] col[der] conf[irm] cr[ewind] cw[indow] delc[ommand] deletp di[splay] diffs[plit] dl dr[op] ec elsei[f] endt[ry] exp filetype fix[del] for gui helpg[rep] ia imp is[earch] kee[pmarks] lNf[ile] laddf[ile] lbe[fore] lcs lex[pr] lgete[xpr] lla[st] lnew[er] lockv[ar] ls lvimgrepa[dd] mat[ch] mkv[imrc] nb[key] noautocmd o[pen] p[rint] perld[o] pro ptN[ext] ptp[revious] py3do python3 qa[ll] redr[aw] retu[rn] rubyd[o] sIe sN[ext] sb[uffer] sbp[revious] sci scs sf[ind] sgi si sim[alt] sm[agic] sno[magic] spe[llgood] spellu[ndo] sre[wind] st[op] stopi[nsert] sunmenu sync tab tabfir[st] tabp[revious] tcl th[row] tlnoremenu tn[ext] ts[elect] undoj[oin] up[date] vi[sual]
+syn keyword vimCommand contained	a ar[gs] argl[ocal] ba[ll] bl[ast] brea[k] buffers ca caf[ter] cbo[ttom] cex[pr] cgete[xpr] cl[ist] cn[ext] colo[rscheme] cons[t] cs d[elete] delel delf[unction] dif[fupdate] difft[his] dli[st] ds[earch] echoc[onsole] em[enu] endw[hile] export filt[er] fo[ld] fu[nction] gvim helpt[ags] iabc[lear] import isp[lit] keepa l[ist] laf[ter] lbel[ow] lcscope lf[ile] lgr[ep] lli[st] lnf[ile] lol[der] lt[ag] lw[indow] menut[ranslate] mkvie[w] nbc[lose] noh[lsearch] ol[dfiles] pa[ckadd] po[p] prof[ile] pta[g] ptr[ewind] py3f[ile] pythonx quita[ll] redraws[tatus] rew[ind] rubyf[ile] sIg sa[rgument] sba[ll] sbr[ewind] scl scscope sfir[st] sgl sic sin sm[ap] snoreme spelld[ump] spellw[rong] srg sta[g] sts[elect] sus[pend] syncbind tabN[ext] tabl[ast] tabr[ewind] tcld[o] tj[ump] tlu tno[remap] tu[nmenu] undol[ist] v vie[w] vne[w] wh[ile] wn[ext] wv[iminfo] xmenu xunme
+syn keyword vimCommand contained	ab arga[dd] argu[ment] bad[d] bm[odified] breaka[dd] bun[load] cabc[lear] cal[l] cc cf[ile] changes cla[st] cnew[er] com cope[n] cscope debug delep dell diffg[et] dig[raphs] do dsp[lit] echoe[rr] en[dif] ene[w] exu[sage] fin[d] foldc[lose] g h[elp] hi if in iuna[bbrev] keepalt la[st] lan[guage] lbo[ttom] ld[o] lfdo lgrepa[dd] lma lo[adview] lop[en] lua m[ove] mes[sages] mod[e] nbs[tart] nor omapc[lear] packl[oadall] popu[p] profd[el] ptf[irst] pts[elect] py3f[ile] pyx r[ead] redrawt[abline] ri[ght] rundo sIl sal[l] sbf[irst] sc scp se[t] sg sgn sie sip sme snoremenu spelli[nfo] spr[evious] sri star[tinsert] substitutepattern sv[iew] syntime tabc[lose] tabm[ove] tabs tclf[ile] tl[ast] tlunmenu to[pleft] tunma[p] unh[ide] var vim9[cmd] vs[plit] win[size] wp[revious] x[it] xnoreme xunmenu
+syn keyword vimCommand contained	abc[lear] argd[elete] as[cii] balt bn[ext] breakd[el] bw[ipeout] cabo[ve] cat[ch] ccl[ose] cfdo chd[ir] class cnf[ile] comc[lear] cp[revious] cstag debugg[reedy] deletel delm[arks] diffo[ff] dir doau e[dit] echom[sg] enddef eval f[ile] fina[lly] foldd[oopen] go[to] ha[rdcopy] hid[e] ij[ump] inor j[oin] keepj[umps] lab[ove] lat lc[d] le[ft] lfir[st] lh[elpgrep] lmak[e] loadk lp[revious] luado ma[rk] mk[exrc] mz[scheme] new nore on[ly] pc[lose] pp[op] promptf[ind] ptj[ump] pu[t] py[thon] pyxdo rec[over] reg[isters] rightb[elow] rv[iminfo] sIn san[dbox] sbl[ast] scI scr[iptnames] setf[iletype] sgI sgp sig sir smenu so[urce] spellr[are] sr srl startg[replace] substituterepeat sw[apname] t tabd[o] tabn[ext] tags te[aroff] tlm tm[enu] tp[revious] type unl ve[rsion] vim9s[cript] wN[ext] winc[md] wq xa[ll] xnoremenu xwininfo
+syn keyword vimCommand contained	abo[veleft] argdo au bd[elete] bo[tright] breakl[ist] cN[ext] cad[dbuffer] cb[uffer] cd cfir[st] che[ckpath] cle[arjumps] cnor comp[iler] cpf[ile] cun def deletep delp diffp[atch] disa[ssemble] doaut ea echon endf[unction] ex files fini[sh] folddoc[losed] gr[ep] helpc[lose] his[tory] il[ist] interface ju[mps] keepp[atterns] lad[dexpr] later lch[dir] lefta[bove] lg[etfile] lhi[story] lmapc[lear] loadkeymap lpf[ile] luafile mak[e] mks[ession] mzf[ile] nmapc[lear] nos[wapfile] opt[ions] pe[rl] pre[serve] promptr[epl] ptl[ast] pw[d] pydo pyxfile red[o] res[ize] ru[ntime] sI sIp sav[eas] sbm[odified] sce scripte[ncoding] setg[lobal] sgc sgr sign sl[eep] smile sor[t] spellr[epall] srI srn startr[eplace] sun[hide] sy tN[ext] tabe[dit] tabnew tc[d] ter[minal] tlmenu tma[p] tr[ewind] u[ndo] unlo[ckvar] verb[ose] vim[grep] w[rite] windo wqa[ll] xmapc[lear] xprop y[ank]
+syn keyword vimCommand contained	addd arge[dit] bN[ext] bel[owright] bp[revious] bro[wse] cNf[ile] cadde[xpr] cbe[fore] cdo cg[etfile] checkt[ime] clo[se] co[py] con[tinue] cq[uit] cuna[bbrev] defc[ompile] deletl dep diffpu[t] dj[ump] dp earlier el[se] endfo[r] exi[t] filet fir[st] foldo[pen] grepa[dd] helpf[ind] i imapc[lear] intro k lN[ext] laddb[uffer] lb[uffer] lcl[ose] leg[acy] lgetb[uffer] ll lne[xt] loc[kmarks] lr[ewind] lv[imgrep] marks mksp[ell] n[ext] noa nu[mber] ownsyntax ped[it] prev[ious] ps[earch] ptn[ext] py3 pyf[ile] q[uit] redi[r] ret[ab] rub[y] sIc sIr sbN[ext] sbn[ext] scg scriptv[ersion] setl[ocal] sge sh[ell] sil[ent] sla[st] sn[ext] sp[lit] spellr[rare] src srp stj[ump] sunme syn ta[g] tabf[ind] tabo[nly] tch[dir] tf[irst] tln tmapc[lear] try una[bbreviate] uns[ilent] vert[ical] vimgrepa[dd] wa[ll] winp[os] wundo xme xr[estore] z[^.=]
+syn keyword vimCommand contained	al[l] argg[lobal] b[uffer] bf[irst] br[ewind] bufdo c[hange] caddf[ile] cbel[ow] ce[nter] cgetb[uffer] chi[story] cmapc[lear] col[der] conf[irm] cr[ewind] cw[indow] delc[ommand] deletp di[splay] diffs[plit] dl dr[op] ec elsei[f] endt[ry] exp filetype fix[del] for gui helpg[rep] ia imp is[earch] kee[pmarks] lNf[ile] laddf[ile] lbe[fore] lcs lex[pr] lgete[xpr] lla[st] lnew[er] lockv[ar] ls lvimgrepa[dd] mat[ch] mkv[imrc] nb[key] noautocmd o[pen] p[rint] perld[o] pro ptN[ext] ptp[revious] py3do python3 qa[ll] redr[aw] retu[rn] rubyd[o] sIe sN[ext] sb[uffer] sbp[revious] sci scs sf[ind] sgi si sim[alt] sm[agic] sno[magic] spe[llgood] spellu[ndo] sre[wind] st[op] stopi[nsert] sunmenu sync tab tabfir[st] tabp[revious] tcl th[row] tlnoremenu tn[ext] ts[elect] undoj[oin] up[date] vi[sual] viu[sage]
 syn match   vimCommand contained	"\<z[-+^.=]\=\>"
 syn keyword vimStdPlugin contained	Arguments Asm Break Cfilter Clear Continue DiffOrig Evaluate Finish Gdb Lfilter Man N[ext] Over P[rint] Program Run S Source Step Stop Termdebug TermdebugCommand TOhtml Winbar XMLent XMLns
 
 " vimOptions are caught only when contained in a vimSet {{{2
-syn keyword vimOption contained	acd ambw arshape aw backupskip beval bk bri bufhidden cdpath cindent cm colorcolumn completeopt cp cscopeprg csprg culopt def diffexpr ea ei ep eventignore fdi fenc fileformat fkmap foldexpr foldopen fsync gfw guicursor guitabtooltip hidden hlg imactivatefunc imi inc inex isident keymap langnoremap linespace loadplugins ma matchtime mef mle modelineexpr mousehide mps nu opendevice paste pex pmbfn printencoding pt pythonhome quoteescape renderoptions rlc ruf scb scrolloff selectmode shellquote shiftwidth showmode sj smd spell spl srr startofline suffixes switchbuf ta tagfunc tbi term termwintype tgc titlelen toolbariconsize ttimeout ttymouse twt undofile varsofttabstop verbosefile viminfofile wak weirdinvert wig wildoptions winheight wm wrapscan
-syn keyword vimOption contained	ai anti asd awa balloondelay bevalterm bkc briopt buflisted cedit cink cmdheight columns completepopup cpo cscopequickfix csqf cursorbind define diffopt ead ek equalalways ex fdl fencs fileformats flp foldignore foldtext ft ghr guifont helpfile highlight hls imactivatekey iminsert include inf isk keymodel langremap lisp lpl macatsui maxcombine menc mls modelines mousem msm number operatorfunc pastetoggle pexpr popt printexpr pumheight pythonthreedll rdt report rnu ruler scf scrollopt sessionoptions shellredir shm showtabline slm sn spellcapcheck splitbelow ss statusline suffixesadd sws tabline taglength tbidi termbidi terse tgst titleold top ttimeoutlen ttyscroll tx undolevels vartabstop vfile virtualedit warn wfh wildchar wim winminheight wmh write
-syn keyword vimOption contained	akm antialias autochdir background ballooneval bex bl brk buftype cf cinkeys cmdwinheight com completeslash cpoptions cscoperelative csre cursorcolumn delcombine digraph eadirection emo equalprg expandtab fdls fex fileignorecase fml foldlevel formatexpr gcr go guifontset helpheight history hlsearch imaf ims includeexpr infercase iskeyword keywordprg laststatus lispwords lrm magic maxfuncdepth menuitems mm modifiable mousemodel mzq numberwidth opfunc patchexpr pfn pp printfont pumwidth pythonthreehome re restorescreen ro rulerformat scl scs sft shellslash shortmess shq sm so spellfile splitright ssl stl sw sxe tabpagemax tagrelative tbis termencoding textauto thesaurus titlestring tpm ttm ttytype uc undoreload vb vi visualbell wb wfw wildcharm winaltkeys winminwidth wmnu writeany
-syn keyword vimOption contained	al ar autoindent backspace balloonevalterm bexpr bo browsedir casemap cfu cino cmp comments concealcursor cpp cscopetag cst cursorline dex dip eb emoji errorbells exrc fdm ff filetype fmr foldlevelstart formatlistpat gd gp guifontwide helplang hk ic imak imsearch incsearch insertmode isp km lazyredraw list ls makeef maxmapdepth mfd mmd modified mouses mzquantum nuw osfiletype patchmode ph preserveindent printheader pvh pyx readonly revins rop runtimepath scr sect sh shelltemp shortname si smartcase softtabstop spelllang spo ssop stmp swapfile sxq tabstop tags tbs termguicolors textmode tildeop tl tr tty tw udf updatecount vbs viewdir vop wc wh wildignore wincolor winptydll wmw writebackup
-syn keyword vimOption contained	aleph arab autoread backup balloonexpr bg bomb bs cb ch cinoptions cms commentstring conceallevel cpt cscopetagorder csto cursorlineopt dg dir ed enc errorfile fcl fdn ffs fillchars fo foldmarker formatoptions gdefault grepformat guiheadroom hf hkmap icon imc imsf inde is isprint kmp lbr listchars lsp makeencoding maxmem mh mmp more mouseshape mzschemedll odev pa path pheader previewheight printmbcharset pvp pyxversion redrawtime ri rs sb scroll sections shcf shelltype showbreak sidescroll smartindent sol spelloptions spr st sts swapsync syn tag tagstack tc termwinkey textwidth timeout tm ts ttybuiltin twk udir updatetime vdir viewoptions vsts wcm whichwrap wildignorecase window winwidth wop writedelay
-syn keyword vimOption contained	allowrevins arabic autoshelldir backupcopy bdir bh breakat bsdir cc charconvert cinw co compatible confirm crb cscopeverbose csverb cwh dict directory edcompatible encoding errorformat fcs fdo fic fixendofline foldclose foldmethod formatprg gfm grepprg guioptions hh hkmapp iconstring imcmdline imst indentexpr isf joinspaces kp lcs lm luadll makeprg maxmempattern mis mmt mouse mouset mzschemegcdll oft packpath pdev pi previewpopup printmbfont pvw qe regexpengine rightleft rtp sbo scrollbind secure shell shellxescape showcmd sidescrolloff smarttab sp spellsuggest sps sta su swb synmaxcol tagbsearch tal tcldll termwinscroll tf timeoutlen to tsl ttyfast tws ul ur ve vif vts wcr wi wildmenu winfixheight wiv wrap ws
-syn keyword vimOption contained	altkeymap arabicshape autowrite backupdir bdlay bin breakindent bsk ccv ci cinwords cocu complete copyindent cryptmethod csl cuc debug dictionary display ef endofline esckeys fdc fdt fileencoding fixeol foldcolumn foldminlines fp gfn gtl guipty hi hkp ignorecase imd imstatusfunc indentkeys isfname js langmap linebreak lmap lw mat maxmemtot mkspellmem mod mousef mousetime nf ofu para penc pm previewwindow printoptions pw qftf relativenumber rightleftcmd ru sbr scrollfocus sel shellcmdflag shellxquote showfulltag signcolumn smc spc spf sr stal sua swf syntax tagcase tb tenc termwinsize tfu title toolbar tsr ttym twsl undodir ut verbose viminfo wa wd wic wildmode winfixwidth wiw wrapmargin ww
-syn keyword vimOption contained	ambiwidth ari autowriteall backupext belloff binary breakindentopt bt cd cin clipboard cole completefunc cot cscopepathcomp cspc cul deco diff dy efm eol et fde fen fileencodings fk foldenable foldnestmax fs gfs gtt guitablabel hid hl im imdisable imstyle indk isi key langmenu lines lnr lz matchpairs mco ml modeline mousefocus mp nrformats omnifunc paragraphs perldll pmbcs printdevice prompt pythondll quickfixtextfunc remap rl rubydll sc scrolljump selection shellpipe shiftround showmatch siso
+syn keyword vimOption contained	acd ambw arshape aw backupskip beval bk bri bufhidden cdh ci cinwords cocu complete copyindent cryptmethod csl cuc debug dictionary display ef endofline esckeys fdc fdt fileencoding fixeol foldcolumn foldminlines fp gfn grepprg guiligatures hf hkmap icon imc imsf inde is isprint kmp lbr listchars lsp makeencoding maxmem mh mmp more mouseshape mzschemedll odev pa path pheader previewheight printmbcharset pvp pyxversion redrawtime ri rs sb scroll sections shcf shelltype showbreak sidescroll smartindent sp spf srr statusline sw sxe tabpagemax tagrelative tbis termencoding textauto thesaurus titleold top ttimeout ttymouse twt undofile varsofttabstop verbosefile viminfofile wak weirdinvert wig wildoptions winheight wm wrapscan
+syn keyword vimOption contained	ai anti asd awa balloondelay bevalterm bkc briopt buflisted cdhome cin clipboard cole completefunc cot cscopepathcomp cspc cul deco diff dy efm eol et fde fen fileencodings fk foldenable foldnestmax fs gfs gtl guioptions hh hkmapp iconstring imcmdline imst indentexpr isf joinspaces kp lcs lm luadll makeprg maxmempattern mis mmt mouse mouset mzschemegcdll oft packpath pdev pi previewpopup printmbfont pvw qe regexpengine rightleft rtp sbo scrollbind secure shell shellxescape showcmd sidescrolloff smarttab spc spl ss stl swapfile sxq tabstop tags tbs termguicolors textmode thesaurusfunc titlestring tpm ttimeoutlen ttyscroll tx undolevels vartabstop vfile virtualedit warn wfh wildchar wim winminheight wmh write
+syn keyword vimOption contained	akm antialias autochdir background ballooneval bex bl brk buftype cdpath cindent cm colorcolumn completeopt cp cscopeprg csprg culopt def diffexpr ea ei ep eventignore fdi fenc fileformat fkmap foldexpr foldopen fsync gfw gtt guipty hi hkp ignorecase imd imstatusfunc indentkeys isfname js langmap linebreak lmap lw mat maxmemtot mkspellmem mod mousef mousetime nf ofu para penc pm previewwindow printoptions pw qftf relativenumber rightleftcmd ru sbr scrollfocus sel shellcmdflag shellxquote showfulltag signcolumn smc spell splitbelow ssl stmp swapsync syn tag tagstack tc termwinkey textwidth tildeop tl tr ttm ttytype uc undoreload vb vi visualbell wb wfw wildcharm winaltkeys winminwidth wmnu writeany
+syn keyword vimOption contained	al ar autoindent backspace balloonevalterm bexpr bo browsedir casemap cedit cink cmdheight columns completepopup cpo cscopequickfix csqf cursorbind define diffopt ead ek equalalways ex fdl fencs fileformats flp foldignore foldtext ft ghr guicursor guitablabel hid hl im imdisable imstyle indk isi key langmenu lines lnr lz matchpairs mco ml modeline mousefocus mp nrformats omnifunc paragraphs perldll pmbcs printdevice prompt pythondll quickfixtextfunc remap rl rubydll sc scrolljump selection shellpipe shiftround showmatch siso smd spellcapcheck splitright ssop sts swb synmaxcol tagbsearch tal tcldll termwinscroll tf timeout tm ts tty tw udf updatecount vbs viewdir vop wc wh wildignore wincolor winptydll wmw writebackup
+syn keyword vimOption contained	aleph arab autoread backup balloonexpr bg bomb bs cb cf cinkeys cmdwinheight com completeslash cpoptions cscoperelative csre cursorcolumn delcombine digraph eadirection emo equalprg expandtab fdls fex fileignorecase fml foldlevel formatexpr gcr gli guifont guitabtooltip hidden hlg imactivatefunc imi inc inex isident keymap langnoremap linespace loadplugins ma matchtime mef mle modelineexpr mousehide mps nu opendevice paste pex pmbfn printencoding pt pythonhome quoteescape renderoptions rlc ruf scb scrolloff selectmode shellquote shiftwidth showmode sj sn spellfile spo st su swf syntax tagcase tb tenc termwinsize tfu timeoutlen to tsl ttybuiltin twk udir updatetime vdir viewoptions vsts wcm whichwrap wildignorecase window winwidth wop writedelay
+syn keyword vimOption contained	allowrevins arabic autoshelldir backupcopy bdir bh breakat bsdir cc cfu cino cmp comments concealcursor cpp cscopetag cst cursorline dex dip eb emoji errorbells exrc fdm ff filetype fmr foldlevelstart formatlistpat gd go guifontset helpfile highlight hls imactivatekey iminsert include inf isk keymodel langremap lisp lpl macatsui maxcombine menc mls modelines mousem msm number operatorfunc pastetoggle pexpr popt printexpr pumheight pythonthreedll rdt report rnu ruler scf scrollopt sessionoptions shellredir shm showtabline slm so spelllang spr sta sua switchbuf ta tagfunc tbi term termwintype tgc title toolbar tsr ttyfast tws ul ur ve vif vts wcr wi wildmenu winfixheight wiv wrap ws
+syn keyword vimOption contained	altkeymap arabicshape autowrite backupdir bdlay bin breakindent bsk ccv ch cinoptions cms commentstring conceallevel cpt cscopetagorder csto cursorlineopt dg dir ed enc errorfile fcl fdn ffs fillchars fo foldmarker formatoptions gdefault gp guifontwide helpheight history hlsearch imaf ims includeexpr infercase iskeyword keywordprg laststatus lispwords lrm magic maxfuncdepth menuitems mm modifiable mousemodel mzq numberwidth opfunc patchexpr pfn pp printfont pumwidth pythonthreehome re restorescreen ro rulerformat scl scs sft shellslash shortmess shq sm softtabstop spelloptions sps stal suffixes sws tabline taglength tbidi termbidi terse tgst titlelen toolbariconsize tsrfu ttym twsl undodir ut verbose viminfo wa wd wic wildmode winfixwidth wiw wrapmargin ww
+syn keyword vimOption contained	ambiwidth ari autowriteall backupext belloff binary breakindentopt bt cd charconvert cinw co compatible confirm crb cscopeverbose csverb cwh dict directory edcompatible encoding errorformat fcs fdo fic fixendofline foldclose foldmethod formatprg gfm grepformat guiheadroom helplang hk ic imak imsearch incsearch insertmode isp km lazyredraw list ls makeef maxmapdepth mfd mmd modified mouses mzquantum nuw osfiletype patchmode ph preserveindent printheader pvh pyx readonly revins rop runtimepath scr sect sh shelltemp shortname si smartcase sol spellsuggest sr startofline suffixesadd
 
 " vimOptions: These are the turn-off setting variants {{{2
 syn keyword vimOption contained	noacd noallowrevins noantialias noarabic noarshape noautoindent noautowrite noawa noballoonevalterm nobin nobl nobri noci nocompatible nocp nocscopetag nocst nocul nocursorline nodg noea noedcompatible noemoji noequalalways noet noexrc nofileignorecase nofk nofs nogdefault nohidden nohkmapp nohlsearch noignorecase noimcmdline noincsearch noinsertmode nojs nolazyredraw nolisp noloadplugins nolz nomagic nomle nomodelineexpr nomodified nomousef nomousehide nonumber noopendevice nopi nopreviewwindow nopvw norelativenumber norestorescreen nori norl noro noru nosb noscb noscrollbind noscs nosft noshelltemp noshortname noshowfulltag noshowmode nosm nosmartindent nosmd nosol nosplitbelow nospr nossl nostartofline noswapfile nota notagrelative notbi notbs noterse notextmode notgst notimeout noto notr nottybuiltin notx noundofile novisualbell nowarn noweirdinvert nowfw nowildignorecase nowinfixheight nowiv nowrap nowrite nowritebackup
@@ -66,24 +66,24 @@ syn keyword vimErrSetting contained	bioskey biosk conskey consk autoprint beauti
 
 " AutoCmd Events {{{2
 syn case ignore
-syn keyword vimAutoEvent contained	BufAdd BufDelete BufFilePost BufHidden BufNew BufRead BufReadPost BufUnload BufWinLeave BufWrite BufWritePost CmdlineChanged CmdlineEnter CmdlineLeave CmdUndefined CmdwinEnter CmdwinLeave ColorScheme ColorSchemePre CompleteChanged CompleteDone CompleteDonePre CursorHold CursorHoldI CursorMoved CursorMovedI DiffUpdated DirChanged EncodingChanged ExitPre FileAppendCmd FileAppendPost FileAppendPre FileChangedRO FileChangedShell FileChangedShellPost FileEncoding FileReadCmd FileReadPost FileReadPre FileType FileWriteCmd FileWritePost FileWritePre FilterReadPost FilterReadPre FilterWritePost FilterWritePre FocusGained FocusLost FuncUndefined GUIEnter GUIFailed InsertChange InsertCharPre InsertEnter InsertLeave InsertLeavePre MenuPopup OptionSet QuickFixCmdPost QuickFixCmdPre QuitPre RemoteReply SafeState SafeStateAgain SessionLoadPost ShellCmdPost ShellFilterPost SigUSR1 SourceCmd SourcePost SourcePre SpellFileMissing StdinReadPost StdinReadPre SwapExists Syntax TabClosed TabEnter TabLeave TabNew TermChanged TerminalOpen TerminalWinOpen TermResponse TextChanged TextChangedI TextChangedP TextYankPost User VimEnter VimLeave VimLeavePre VimResized VimResume VimSuspend WinEnter WinLeave WinNew
-syn keyword vimAutoEvent contained	BufCreate BufEnter BufFilePre BufLeave BufNewFile BufReadCmd BufReadPre BufWinEnter BufWipeout BufWriteCmd BufWritePre
+syn keyword vimAutoEvent contained	BufAdd BufDelete BufFilePost BufHidden BufNew BufRead BufReadPost BufUnload BufWinLeave BufWrite BufWritePost CmdlineChanged CmdlineLeave CmdwinEnter ColorScheme ColorSchemePre CompleteChanged CompleteDone CompleteDonePre CursorHold CursorHoldI CursorMoved CursorMovedI DiffUpdated DirChanged EncodingChanged ExitPre FileAppendCmd FileAppendPost FileAppendPre FileChangedRO FileChangedShell FileChangedShellPost FileEncoding FileExplorer FileReadCmd FileReadPost FileReadPre FileType FileWriteCmd FileWritePost FileWritePre FilterReadPost FilterReadPre FilterWritePost FilterWritePre FocusGained FocusLost FuncUndefined GUIEnter GUIFailed InsertChange InsertCharPre InsertEnter InsertLeave InsertLeavePre MenuPopup ModeChanged OptionSet QuickFixCmdPost QuickFixCmdPre QuitPre RemoteReply SafeState SafeStateAgain SessionLoadPost ShellCmdPost ShellFilterPost SigUSR1 SourceCmd SourcePost SourcePre SpellFileMissing StdinReadPost StdinReadPre SwapExists Syntax TabClosed TabEnter TabLeave TabNew TermChanged TerminalOpen TerminalWinOpen TermResponse TextChanged TextChangedI TextChangedP TextYankPost User VimEnter VimLeave VimLeavePre VimResized VimResume VimSuspend WinClosed WinEnter WinLeave WinNew
+syn keyword vimAutoEvent contained	BufCreate BufEnter BufFilePre BufLeave BufNewFile BufReadCmd BufReadPre BufWinEnter BufWipeout BufWriteCmd BufWritePre CmdlineEnter CmdUndefined CmdwinLeave
 
 " Highlight commonly used Groupnames {{{2
 syn keyword vimGroup contained	Comment Constant String Character Number Boolean Float Identifier Function Statement Conditional Repeat Label Operator Keyword Exception PreProc Include Define Macro PreCondit Type StorageClass Structure Typedef Special SpecialChar Tag Delimiter SpecialComment Debug Underlined Ignore Error Todo
 
 " Default highlighting groups {{{2
-syn keyword vimHLGroup contained	ColorColumn Cursor CursorColumn CursorIM CursorLine CursorLineNr DiffAdd DiffChange DiffDelete DiffText Directory EndOfBuffer ErrorMsg FoldColumn Folded IncSearch LineNr LineNrAbove LineNrBelow MatchParen Menu ModeMsg MoreMsg NonText Normal Pmenu PmenuSbar PmenuSel PmenuThumb Question QuickFixLine Scrollbar Search SignColumn SpecialKey SpellBad SpellCap SpellLocal SpellRare StatusLine StatusLineNC StatusLineTerm TabLine TabLineFill TabLineSel Terminal Title Tooltip VertSplit Visual VisualNOS WarningMsg WildMenu
+syn keyword vimHLGroup contained	ColorColumn Cursor CursorColumn CursorIM CursorLine CursorLineFold CursorLineNr CursorLineSign DiffAdd DiffChange DiffDelete DiffText Directory EndOfBuffer ErrorMsg FoldColumn Folded IncSearch LineNr LineNrAbove LineNrBelow MatchParen Menu ModeMsg MoreMsg NonText Normal Pmenu PmenuSbar PmenuSel PmenuThumb Question QuickFixLine Scrollbar Search SignColumn SpecialKey SpellBad SpellCap SpellLocal SpellRare StatusLine StatusLineNC StatusLineTerm TabLine TabLineFill TabLineSel Terminal Title Tooltip VertSplit Visual VisualNOS WarningMsg WildMenu
 syn match vimHLGroup contained	"Conceal"
 syn case match
 
 " Function Names {{{2
-syn keyword vimFuncName contained	abs argc assert_equal assert_match atan browsedir bufname byteidxcomp charcol ch_evalexpr ch_logfile ch_sendraw complete cos deepcopy digraph_get environ exepath extend finddir fmod foldtext garbagecollect getchar getcmdpos getcursorcharpos getfsize getline getpid getregtype gettext getwinvar has_key histget iconv inputlist interrupt isnan job_start js_encode libcall list2str log mapcheck matchaddpos matchfuzzypos menu_info nextnonblank popup_atcursor popup_dialog popup_getoptions popup_menu popup_show prompt_setcallback prop_clear prop_type_change pumvisible range reduce reltimestr remote_send resolve screenchar screenstring searchpairpos setbufvar setcursorcharpos setmatches settabwinvar shiftwidth sign_place simplify sound_clear spellbadword state strcharpart stridx strridx swapinfo synIDtrans tabpagenr tanh term_getaltscreen term_getline term_gettty term_setansicolors term_start test_garbagecollect_now test_ignore_error test_null_job test_override test_srand_seed timer_start tr undofile visualmode win_execute winheight winnr win_splitmove
-syn keyword vimFuncName contained	acos argidx assert_equalfile assert_nobeep atan2 bufadd bufnr call charidx ch_evalraw ch_open ch_setoptions complete_add cosh delete digraph_getlist escape exists extendnew findfile fnameescape foldtextresult get getcharmod getcmdtype getcwd getftime getloclist getpos gettabinfo getwininfo glob haslocaldir histnr indent inputrestore invert items job_status json_decode libcallnr listener_add log10 mapnew matcharg matchlist min nr2char popup_beval popup_filter_menu popup_getpos popup_move pow prompt_setinterrupt prop_find prop_type_delete py3eval readblob reg_executing remote_expr remote_startserver reverse screenchars search searchpos setcellwidths setenv setpos settagstack sign_define sign_placelist sin soundfold spellsuggest str2float strchars string strtrans swapname synstack tabpagewinnr tempname term_getansicolors term_getscrolled terminalprops term_setapi term_wait test_garbagecollect_soon test_null_blob test_null_list test_refcount test_unknown timer_stop trim undotree wildmenumode win_findbuf win_id2tabwin winrestcmd winwidth
-syn keyword vimFuncName contained	add arglistid assert_exception assert_notequal balloon_gettext bufexists bufwinid ceil ch_canread ch_getbufnr ch_read ch_status complete_check count deletebufline digraph_set eval exists_compiled feedkeys flatten fnamemodify foreground getbufinfo getcharpos getcmdwintype getenv getftype getmarklist getqflist gettabvar getwinpos glob2regpat hasmapto hlexists index inputsave isdirectory job_getchannel job_stop json_encode line listener_flush luaeval mapset matchdelete matchstr mkdir or popup_clear popup_filter_yesno popup_hide popup_notification prevnonblank prompt_setprompt prop_list prop_type_get pyeval readdir reg_recording remote_foreground remove round screencol searchcount server2client setcharpos setfperm setqflist setwinvar sign_getdefined sign_undefine sinh sound_playevent split str2list strdisplaywidth strlen strwidth synconcealed system tagfiles term_dumpdiff term_getattr term_getsize term_list term_setkill test_alloc_fail test_getvalue test_null_channel test_null_partial test_scrollbar test_void timer_stopall trunc uniq winbufnr win_getid win_id2win winrestview wordcount
-syn keyword vimFuncName contained	and argv assert_fails assert_notmatch balloon_show buflisted bufwinnr changenr ch_close ch_getjob ch_readblob cindent complete_info cscope_connection did_filetype digraph_setlist eventhandler exp filereadable flattennew foldclosed fullcommand getbufline getcharsearch getcompletion getfontname getimstatus getmatches getreg gettabwinvar getwinposx globpath histadd hlID input inputsecret isinf job_info join keys line2byte listener_remove map match matchend matchstrpos mode pathshorten popup_close popup_findinfo popup_list popup_setoptions printf prop_add prop_remove prop_type_list pyxeval readdirex reltime remote_peek rename rubyeval screenpos searchdecl serverlist setcharsearch setline setreg sha256 sign_getplaced sign_unplace slice sound_playfile sqrt str2nr strftime strpart submatch synID systemlist taglist term_dumpload term_getcursor term_getstatus term_scrape term_setrestore test_autochdir test_gui_drop_files test_null_dict test_null_string test_setmouse timer_info tolower type values wincol win_gettype winlayout winsaveview writefile
-syn keyword vimFuncName contained	append asin assert_false assert_report balloon_split bufload byte2line char2nr ch_close_in ch_info ch_readraw clearmatches confirm cursor diff_filler echoraw executable expand filewritable float2nr foldclosedend funcref getbufvar getcharstr getcurpos getfperm getjumplist getmousepos getreginfo gettagstack getwinposy has histdel hostname inputdialog insert islocked job_setoptions js_decode len lispindent localtime maparg matchadd matchfuzzy max mzeval perleval popup_create popup_findpreview popup_locate popup_settext prompt_getprompt prop_add_list prop_type_add pum_getpos rand readfile reltimefloat remote_read repeat screenattr screenrow searchpair setbufline setcmdpos setloclist settabvar shellescape sign_jump sign_unplacelist sort sound_stop srand strcharlen strgetchar strptime substitute synIDattr tabpagebuflist tan term_dumpwrite term_getjob term_gettitle term_sendkeys term_setsize test_feedinput test_gui_mouse_event test_null_function test_option_not_set test_settime timer_pause toupper typename virtcol windowsversion win_gotoid winline win_screenpos xor
-syn keyword vimFuncName contained	appendbufline assert_beeps assert_inrange assert_true browse bufloaded byteidx charclass chdir ch_log ch_sendexpr col copy debugbreak diff_hlID empty execute expandcmd filter floor foldlevel function getchangelist getcmdline
+syn keyword vimFuncName contained	abs argc assert_equal assert_match atan browse bufloaded byteidx charclass chdir ch_log ch_sendexpr col copy debugbreak diff_hlID empty execute expandcmd filter floor foldlevel function getchangelist getcmdline getcursorcharpos getftime getmarklist getreg gettabwinvar getwinposx globpath histadd hlget indent inputrestore invert items job_status json_decode libcallnr list2str log mapcheck matchaddpos matchfuzzypos menu_info nextnonblank popup_atcursor popup_dialog popup_getoptions popup_menu popup_show prompt_setcallback prop_clear prop_type_change pumvisible range reduce reltimestr remote_send resolve screenchar screenstring searchpairpos setbufvar setcursorcharpos setmatches settabwinvar shiftwidth sign_place simplify sound_clear spellbadword state strcharpart stridx strridx swapinfo synIDtrans tabpagenr tanh term_getaltscreen term_getline term_gettty term_setansicolors term_start test_garbagecollect_now test_ignore_error test_null_job test_override test_srand_seed timer_start tr undofile visualmode win_execute winheight winnr win_splitmove
+syn keyword vimFuncName contained	acos argidx assert_equalfile assert_nobeep atan2 browsedir bufname byteidxcomp charcol ch_evalexpr ch_logfile ch_sendraw complete cos deepcopy digraph_get environ exepath extend finddir fmod foldtext garbagecollect getchar getcmdpos getcwd getftype getmatches getreginfo gettagstack getwinposy has histdel hlID index inputsave isdirectory job_getchannel job_stop json_encode line listener_add log10 mapnew matcharg matchlist min nr2char popup_beval popup_filter_menu popup_getpos popup_move pow prompt_setinterrupt prop_find prop_type_delete py3eval readblob reg_executing remote_expr remote_startserver reverse screenchars search searchpos setcellwidths setenv setpos settagstack sign_define sign_placelist sin soundfold spellsuggest str2float strchars string strtrans swapname synstack tabpagewinnr tempname term_getansicolors term_getscrolled terminalprops term_setapi term_wait test_garbagecollect_soon test_null_blob test_null_list test_refcount test_unknown timer_stop trim undotree wildmenumode win_findbuf win_id2tabwin winrestcmd winwidth
+syn keyword vimFuncName contained	add arglistid assert_exception assert_notequal balloon_gettext bufadd bufnr call charidx ch_evalraw ch_open ch_setoptions complete_add cosh delete digraph_getlist escape exists extendnew findfile fnameescape foldtextresult get getcharmod getcmdtype getenv getimstatus getmousepos getregtype gettext getwinvar has_key histget hlset input inputsecret isinf job_info join keys line2byte listener_flush luaeval mapset matchdelete matchstr mkdir or popup_clear popup_filter_yesno popup_hide popup_notification prevnonblank prompt_setprompt prop_list prop_type_get pyeval readdir reg_recording remote_foreground remove round screencol searchcount server2client setcharpos setfperm setqflist setwinvar sign_getdefined sign_undefine sinh sound_playevent split str2list strdisplaywidth strlen strwidth synconcealed system tagfiles term_dumpdiff term_getattr term_getsize term_list term_setkill test_alloc_fail test_getvalue test_null_channel test_null_partial test_scrollbar test_void timer_stopall trunc uniq winbufnr win_getid win_id2win winrestview wordcount
+syn keyword vimFuncName contained	and argv assert_fails assert_notmatch balloon_show bufexists bufwinid ceil ch_canread ch_getbufnr ch_read ch_status complete_check count deletebufline digraph_set eval exists_compiled feedkeys flatten fnamemodify foreground getbufinfo getcharpos getcmdwintype getfontname getjumplist getpid gettabinfo getwininfo glob haslocaldir histnr hostname inputdialog insert islocked job_setoptions js_decode len lispindent listener_remove map match matchend matchstrpos mode pathshorten popup_close popup_findinfo popup_list popup_setoptions printf prop_add prop_remove prop_type_list pyxeval readdirex reltime remote_peek rename rubyeval screenpos searchdecl serverlist setcharsearch setline setreg sha256 sign_getplaced sign_unplace slice sound_playfile sqrt str2nr strftime strpart submatch synID systemlist taglist term_dumpload term_getcursor term_getstatus term_scrape term_setrestore test_autochdir test_gui_drop_files test_null_dict test_null_string test_setmouse timer_info tolower type values wincol win_gettype winlayout winsaveview writefile
+syn keyword vimFuncName contained	append asin assert_false assert_report balloon_split buflisted bufwinnr changenr ch_close ch_getjob ch_readblob cindent complete_info cscope_connection did_filetype digraph_setlist eventhandler exp filereadable flattennew foldclosed fullcommand getbufline getcharsearch getcompletion getfperm getline getpos gettabvar getwinpos glob2regpat hasmapto hlexists iconv inputlist interrupt isnan job_start js_encode libcall list2blob localtime maparg matchadd matchfuzzy max mzeval perleval popup_create popup_findpreview popup_locate popup_settext prompt_getprompt prop_add_list prop_type_add pum_getpos rand readfile reltimefloat remote_read repeat screenattr screenrow searchpair setbufline setcmdpos setloclist settabvar shellescape sign_jump sign_unplacelist sort sound_stop srand strcharlen strgetchar strptime substitute synIDattr tabpagebuflist tan term_dumpwrite term_getjob term_gettitle term_sendkeys term_setsize test_feedinput test_gui_mouse_event test_null_function test_option_not_set test_settime timer_pause toupper typename virtcol windowsversion win_gotoid winline win_screenpos xor
+syn keyword vimFuncName contained	appendbufline assert_beeps assert_inrange assert_true blob2list bufload byte2line char2nr ch_close_in ch_info ch_readraw clearmatches confirm cursor diff_filler echoraw executable expand filewritable float2nr foldclosedend funcref getbufvar getcharstr getcurpos getfsize getloclist getqflist
 
 "--- syntax here and above generated by mkvimvim ---
 " Special Vim Highlighting (not automatic) {{{1
@@ -188,11 +188,13 @@ syn match vimFBVar      contained   "\<[bwglstav]:\h[a-zA-Z0-9#_]*\>"
 syn keyword vimCommand  contained	in
 
 " Insertions And Appends: insert append {{{2
+"   (buftype != nofile test avoids having append, change, insert show up in the command window)
 " =======================
-syn region vimInsert	matchgroup=vimCommand start="^[: \t]*\(\d\+\(,\d\+\)\=\)\=a\%[ppend]$"		matchgroup=vimCommand end="^\.$""
-syn region vimInsert	matchgroup=vimCommand start="^[: \t]*\(\d\+\(,\d\+\)\=\)\=c\%[hange]$"		matchgroup=vimCommand end="^\.$""
-syn region vimInsert	matchgroup=vimCommand start="^[: \t]*\(\d\+\(,\d\+\)\=\)\=i\%[nsert]$"		matchgroup=vimCommand end="^\.$""
-syn region vimInsert	matchgroup=vimCommand start="^[: \t]*\(\d\+\(,\d\+\)\=\)\=starti\%[nsert]$"	matchgroup=vimCommand end="^\.$""
+if &buftype != 'nofile'
+ syn region vimInsert	matchgroup=vimCommand start="^[: \t]*\(\d\+\(,\d\+\)\=\)\=a\%[ppend]$"		matchgroup=vimCommand end="^\.$""
+ syn region vimInsert	matchgroup=vimCommand start="^[: \t]*\(\d\+\(,\d\+\)\=\)\=c\%[hange]$"		matchgroup=vimCommand end="^\.$""
+ syn region vimInsert	matchgroup=vimCommand start="^[: \t]*\(\d\+\(,\d\+\)\=\)\=i\%[nsert]$"		matchgroup=vimCommand end="^\.$""
+endif
 
 " Behave! {{{2
 " =======
@@ -228,9 +230,9 @@ syn keyword vimAugroupKey contained	aug[roup]
 " Operators: {{{2
 " =========
 syn cluster	vimOperGroup	contains=vimEnvvar,vimFunc,vimFuncVar,vimOper,vimOperParen,vimNumber,vimString,vimType,vimRegister,vimContinue,vim9Comment
-syn match	vimOper	"\%#=1\(==\|!=\|>=\|<=\|=\~\|!\~\|>\|<\|=\)[?#]\{0,2}"	skipwhite nextgroup=vimString,vimSpecFile
-syn match	vimOper	"\(\<is\|\<isnot\)[?#]\{0,2}\>"			skipwhite nextgroup=vimString,vimSpecFile
 syn match	vimOper	"||\|&&\|[-+.!]"				skipwhite nextgroup=vimString,vimSpecFile
+syn match	vimOper	"\%#=1\(==\|!=\|>=\|<=\|=\~\|!\~\|>\|<\|=\|!\~#\)[?#]\{0,2}"	skipwhite nextgroup=vimString,vimSpecFile
+syn match	vimOper	"\(\<is\|\<isnot\)[?#]\{0,2}\>"			skipwhite nextgroup=vimString,vimSpecFile
 syn region	vimOperParen 	matchgroup=vimParenSep	start="(" end=")" contains=vimoperStar,@vimOperGroup
 syn region	vimOperParen	matchgroup=vimSep		start="#\={" end="}" contains=@vimOperGroup nextgroup=vimVar,vimFuncVar
 if !exists("g:vimsyn_noerror") && !exists("g:vimsyn_noopererror")
@@ -397,7 +399,7 @@ syn match	vimSetMod	contained	"&vim\=\|[!&?<]\|all&"
 " Let: {{{2
 " ===
 syn keyword	vimLet	let	unl[et]	skipwhite nextgroup=vimVar,vimFuncVar,vimLetHereDoc
-VimFoldh syn region vimLetHereDoc	matchgroup=vimLetHereDocStart start='=<<\s\+\%(trim\>\)\=\s*\z(\L\S*\)'	matchgroup=vimLetHereDocStop end='^\s*\z1\s*$'	contains=vimComment,vim9Comment
+VimFoldh syn region vimLetHereDoc	matchgroup=vimLetHereDocStart start='=<<\s\+\%(trim\>\)\=\s*\z(\L\S*\)'	matchgroup=vimLetHereDocStop end='^\s*\z1\s*$'
 
 " Abbreviations: {{{2
 " =============
@@ -761,10 +763,10 @@ if g:vimsyn_embed =~# 'P' && has("pythonx") && filereadable(s:pythonpath)
  unlet! b:current_syntax
  syn cluster vimFuncBodyList	add=vimPythonRegion
  exe "syn include @vimPythonScript ".s:pythonpath
- VimFoldP syn region vimPythonRegion matchgroup=vimScriptDelim start=+py\%[thon][3x]\=\s*<<\s*\z(\S*\)\ze\(\s*#.*\)\=$+ end=+^\z1\ze\(\s*".*\)\=$+	contains=@vimPythonScript
- VimFoldP syn region vimPythonRegion matchgroup=vimScriptDelim start=+py\%[thon][3x]\=\s*<<\s*$+ end=+\.$+				contains=@vimPythonScript
- VimFoldP syn region vimPythonRegion matchgroup=vimScriptDelim start=+Py\%[thon]2or3\s*<<\s*\z(\S*\)\ze\(\s*#.*\)\=$+ end=+^\z1\ze\(\s*".*\)\=$+	contains=@vimPythonScript
- VimFoldP syn region vimPythonRegion matchgroup=vimScriptDelim start=+Py\%[thon]2or3\=\s*<<\s*$+ end=+\.$+				contains=@vimPythonScript
+ VimFoldP syn region vimPythonRegion matchgroup=vimScriptDelim start=+py\%[thon][3x]\=\s*<<\s*\%(trim\s*\)\=\z(\S*\)\ze\(\s*#.*\)\=$+ end=+^\z1\ze\(\s*".*\)\=$+	contains=@vimPythonScript
+ VimFoldP syn region vimPythonRegion matchgroup=vimScriptDelim start=+py\%[thon][3x]\=\s*<<\s*\%(trim\s*\)\=$+ end=+\.$+				contains=@vimPythonScript
+ VimFoldP syn region vimPythonRegion matchgroup=vimScriptDelim start=+Py\%[thon]2or3\s*<<\s*\%(trim\s*\)\=\z(\S*\)\ze\(\s*#.*\)\=$+ end=+^\z1\ze\(\s*".*\)\=$+	contains=@vimPythonScript
+ VimFoldP syn region vimPythonRegion matchgroup=vimScriptDelim start=+Py\%[thon]2or3\=\s*<<\s*\%(trim\s*\)\=$+ end=+\.$+				contains=@vimPythonScript
  syn cluster vimFuncBodyList	add=vimPythonRegion
 else
  syn region vimEmbedError start=+py\%[thon]3\=\s*<<\s*\z(.*\)$+ end=+^\z1$+

runtime/tools/demoserver.py

@@ -62,9 +62,16 @@ class ThreadedTCPRequestHandler(socketserver.BaseRequestHandler):
             if decoded[0] >= 0:
                 if decoded[1] == 'hello!':
                     response = "got it"
+                    id = decoded[0]
+                elif decoded[1] == 'hello channel!':
+                    response = "got that"
+                    # response is not to a specific message callback but to the
+                    # channel callback, need to use ID zero
+                    id = 0
                 else:
                     response = "what?"
-                encoded = json.dumps([decoded[0], response])
+                    id = decoded[0]
+                encoded = json.dumps([id, response])
                 print("sending {0}".format(encoded))
                 self.request.sendall(encoded.encode('utf-8'))
         thesocket = None

runtime/tutor/tutor.da.utf-8

@@ -11,7 +11,7 @@
      afhængig af hvor meget tid der bruges på at eksperimentere.
 
      VÆR OPMÆRKSOM PÅ AT:
-     Kommandoerne i lektionerne ændre teksten. Opret en kopi af filen
+     Kommandoerne i lektionerne ændrer teksten. Opret en kopi af filen
      til at øve på (hvis du startede "vimtutor", så er det allerede en kopi).
 
      Det er vigtigt at huske på at vejledningen er sat op til at lære ved at

src/Make_cyg_ming.mak

@@ -1140,7 +1140,7 @@ cmdidxs: ex_cmds.h
 ###########################################################################
 INCL =	vim.h alloc.h ascii.h ex_cmds.h feature.h errors.h globals.h \
 	keymap.h macros.h option.h os_dos.h os_win32.h proto.h regexp.h \
-	spell.h structs.h term.h beval.h $(NBDEBUG_INCL)
+	spell.h structs.h termdefs.h beval.h $(NBDEBUG_INCL)
 GUI_INCL = gui.h
 ifeq ($(DIRECTX),yes)
 GUI_INCL += gui_dwrite.h

src/Make_mvc.mak

@@ -147,6 +147,8 @@
 #
 #	Static Code Analysis: ANALYZE=yes (works with VS2012 or later)
 #
+#	Address Sanitizer: ASAN=yes (works with VS2019 or later)
+#
 # You can combine any of these interfaces
 #
 # Example: To build the non-debug, GUI version with Perl interface:
@@ -662,6 +664,12 @@ CFLAGS = $(CFLAGS) -DHAVE_STDINT_H
 CFLAGS = $(CFLAGS) /analyze
 !endif
 
+# Address Sanitizer (ASAN) generally available starting with VS2019 version
+# 16.9
+!if ("$(ASAN)" == "yes") && ($(MSVC_MAJOR) >= 14)
+CFLAGS = $(CFLAGS) /fsanitize=address
+!endif
+
 !ifdef NODEBUG
 VIM = vim
 ! if "$(OPTIMIZE)" == "SPACE"
@@ -730,7 +738,7 @@ CFLAGS = $(CFLAGS) $(CFLAGS_DEPR)
 
 INCL =	vim.h alloc.h ascii.h ex_cmds.h feature.h errors.h globals.h \
 	keymap.h macros.h option.h os_dos.h os_win32.h proto.h regexp.h \
-	spell.h structs.h term.h beval.h $(NBDEBUG_INCL)
+	spell.h structs.h termdefs.h beval.h $(NBDEBUG_INCL)
 
 OBJ = \
 	$(OUTDIR)\alloc.obj \

src/Make_vms.mms

@@ -2,7 +2,7 @@
 # Makefile for Vim on OpenVMS
 #
 # Maintainer:   Zoltan Arpadffy <arpadffy@polarhome.com>
-# Last change:  2021 Jan 04
+# Last change:  2021 Nov 19
 #
 # This script has been tested on VMS 6.2 to 8.4 on DEC Alpha, VAX and IA64
 # with MMS and MMK
@@ -741,7 +741,7 @@ lua_env :
 .ENDIF
 
 alloc.obj : alloc.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 arabic.obj : arabic.c vim.h
 arglist.obj : arglist.c vim.h [.auto]config.h feature.h os_unix.h
@@ -749,416 +749,416 @@ autocmd.obj : autocmd.c vim.h [.auto]config.h feature.h os_unix.h
 blowfish.obj : blowfish.c vim.h [.auto]config.h feature.h os_unix.h
 blob.obj : blob.c vim.h [.auto]config.h feature.h os_unix.h
 buffer.obj : buffer.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h version.h
 bufwrite.obj : bufwrite.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 change.obj : change.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 charset.obj : charset.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 cindent.obj : cindent.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 clientserver.obj : clientserver.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 clipboard.obj : clipboard.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 cmdexpand.obj : cmdexpand.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 cmdhist.obj : cmdhist.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 crypt.obj : crypt.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
+ ascii.h keymap.h termdefs.h macros.h option.h structs.h regexp.h gui.h \
  beval.h [.proto]gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \
  errors.h globals.h
 crypt_zip.obj : crypt_zip.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h option.h structs.h \
+ ascii.h keymap.h termdefs.h macros.h option.h structs.h \
  regexp.h gui.h beval.h [.proto]gui_beval.pro alloc.h ex_cmds.h spell.h \
  proto.h errors.h globals.h
 debugger.obj : debugger.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 dict.obj : dict.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
+ ascii.h keymap.h termdefs.h macros.h option.h structs.h regexp.h gui.h \
  beval.h [.proto]gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \
  errors.h globals.h
 diff.obj : diff.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 digraph.obj : digraph.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 drawline.obj : drawline.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 drawscreen.obj : drawscreen.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 edit.obj : edit.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 eval.obj : eval.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 evalbuffer.obj : evalbuffer.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h option.h structs.h \
+ ascii.h keymap.h termdefs.h macros.h option.h structs.h \
  regexp.h gui.h beval.h [.proto]gui_beval.pro alloc.h ex_cmds.h spell.h \
  proto.h errors.h globals.h
 evalfunc.obj : evalfunc.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h option.h structs.h \
+ ascii.h keymap.h termdefs.h macros.h option.h structs.h \
  regexp.h gui.h beval.h [.proto]gui_beval.pro alloc.h ex_cmds.h spell.h \
  proto.h errors.h globals.h version.h
 evalvars.obj : evalvars.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h option.h structs.h \
+ ascii.h keymap.h termdefs.h macros.h option.h structs.h \
  regexp.h gui.h beval.h [.proto]gui_beval.pro alloc.h ex_cmds.h spell.h \
  proto.h errors.h globals.h version.h
 evalwindow.obj : evalwindow.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h option.h structs.h \
+ ascii.h keymap.h termdefs.h macros.h option.h structs.h \
  regexp.h gui.h beval.h [.proto]gui_beval.pro alloc.h ex_cmds.h spell.h \
  proto.h errors.h globals.h
 ex_cmds.obj : ex_cmds.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h version.h
 ex_cmds2.obj : ex_cmds2.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h version.h
 ex_docmd.obj : ex_docmd.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h ex_cmdidxs.h
 ex_eval.obj : ex_eval.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 ex_getln.obj : ex_getln.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 fileio.obj : fileio.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 filepath.obj : filepath.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 findfile.obj : findfile.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 float.obj : float.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 fold.obj : fold.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 getchar.obj : getchar.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 gui_xim.obj : gui_xim.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 hardcopy.obj : hardcopy.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h version.h
 hashtab.obj : hashtab.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 help.obj : help.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 highlight.obj : highlight.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 if_cscope.obj : if_cscope.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h if_cscope.h
 if_xcmdsrv.obj : if_xcmdsrv.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h version.h
 if_mzsch.obj : if_mzsch.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h option.h structs.h \
+ ascii.h keymap.h termdefs.h macros.h option.h structs.h \
  regexp.h gui.h beval.h [.proto]gui_beval.pro ex_cmds.h proto.h \
  errors.h globals.h if_mzsch.h
 indent.obj : indent.c vim.h [.auto]config.h feature.h os_unix.h
 insexpand.obj : insexpand.c vim.h [.auto]config.h feature.h os_unix.h
 json.obj : json.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 list.obj : list.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
+ ascii.h keymap.h termdefs.h macros.h option.h structs.h regexp.h gui.h \
  beval.h [.proto]gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \
  errors.h globals.h
 locale.obj : locale.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
+ ascii.h keymap.h termdefs.h macros.h option.h structs.h regexp.h gui.h \
  beval.h [.proto]gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \
  errors.h globals.h
 main.obj : main.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h \
  arabic.c
 map.obj : map.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 mark.obj : mark.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 match.obj : match.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 memfile.obj : memfile.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 memline.obj : memline.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 menu.obj : menu.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 message.obj : message.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 misc1.obj : misc1.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h \
  version.h
 misc2.obj : misc2.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 mouse.obj : mouse.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 move.obj : move.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 mbyte.obj : mbyte.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 normal.obj : normal.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 ops.obj : ops.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 option.obj : option.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h optiondefs.h
 optionstr.obj : optionstr.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 os_unix.obj : os_unix.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h os_unixx.h
 os_vms.obj : os_vms.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h os_unixx.h
 pathdef.obj : pathdef.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 popupmenu.obj : popupmenu.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 popupwin.obj : popupwin.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 profiler.obj : profiler.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 quickfix.obj : quickfix.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 regexp.obj : regexp.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 register.obj : register.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 scriptfile.obj : scriptfile.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 screen.obj : screen.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 search.obj : search.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 session.obj : session.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 sha256.obj : sha256.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
+ ascii.h keymap.h termdefs.h macros.h option.h structs.h regexp.h gui.h \
  beval.h [.proto]gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \
  errors.h globals.h
 sign.obj : sign.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
+ ascii.h keymap.h termdefs.h macros.h option.h structs.h regexp.h gui.h \
  beval.h [.proto]gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \
  errors.h globals.h
 spell.obj : spell.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 spellfile.obj : spellfile.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h option.h structs.h \
+ ascii.h keymap.h termdefs.h macros.h option.h structs.h \
  regexp.h gui.h beval.h [.proto]gui_beval.pro alloc.h ex_cmds.h spell.h \
  proto.h errors.h globals.h
 spellsuggest.obj : spellsuggest.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h option.h structs.h \
+ ascii.h keymap.h termdefs.h macros.h option.h structs.h \
  regexp.h gui.h beval.h [.proto]gui_beval.pro alloc.h ex_cmds.h spell.h \
  proto.h errors.h globals.h
 strings.obj : strings.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h option.h structs.h \
+ ascii.h keymap.h termdefs.h macros.h option.h structs.h \
  regexp.h gui.h beval.h [.proto]gui_beval.pro alloc.h ex_cmds.h spell.h \
  proto.h errors.h globals.h
 syntax.obj : syntax.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 tag.obj : tag.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 term.obj : term.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 termlib.obj : termlib.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 testing.obj : testing.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 textformat.obj : textformat.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 textobject.obj : textobject.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 textprop.obj : textprop.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 time.obj : time.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 typval.obj : typval.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 ui.obj : ui.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 undo.obj : undo.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 usercmd.obj : usercmd.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h option.h structs.h \
+ ascii.h keymap.h termdefs.h macros.h option.h structs.h \
  regexp.h gui.h beval.h [.proto]gui_beval.pro alloc.h ex_cmds.h spell.h \
  proto.h errors.h globals.h
 userfunc.obj : userfunc.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h option.h structs.h \
+ ascii.h keymap.h termdefs.h macros.h option.h structs.h \
  regexp.h gui.h beval.h [.proto]gui_beval.pro alloc.h ex_cmds.h spell.h \
  proto.h errors.h globals.h
 version.obj : version.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h version.h
 viminfo.obj : viminfo.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h version.h
 vim9compile.obj : vim9compile.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h version.h
 vim9execute.obj : vim9execute.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h version.h
 vim9script.obj : vim9script.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h version.h
 vim9type.obj : vim9type.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h version.h
 window.obj : window.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 gui.obj : gui.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 gui_gtk.obj : gui_gtk.c gui_gtk_f.h vim.h [.auto]config.h feature.h \
- os_unix.h   ascii.h keymap.h term.h macros.h structs.h \
+ os_unix.h   ascii.h keymap.h termdefs.h macros.h structs.h \
  regexp.h gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h \
  proto.h errors.h globals.h [-.pixmaps]stock_icons.h
 gui_gtk_f.obj : gui_gtk_f.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h gui_gtk_f.h
 gui_motif.obj : gui_motif.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h [-.pixmaps]alert.xpm [-.pixmaps]error.xpm \
  [-.pixmaps]generic.xpm [-.pixmaps]info.xpm [-.pixmaps]quest.xpm
 gui_athena.obj : gui_athena.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h gui_at_sb.h
 gui_gtk_x11.obj : gui_gtk_x11.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h gui_gtk_f.h [-.runtime]vim32x32.xpm \
  [-.runtime]vim16x16.xpm [-.runtime]vim48x48.xpm version.h
 gui_x11.obj : gui_x11.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h [-.runtime]vim32x32.xpm \
  [-.runtime]vim16x16.xpm [-.runtime]vim48x48.xpm [-.pixmaps]tb_new.xpm \
@@ -1178,48 +1178,48 @@ gui_x11.obj : gui_x11.c vim.h [.auto]config.h feature.h os_unix.h \
  [-.pixmaps]tb_vsplit.xpm [-.pixmaps]tb_maxwidth.xpm \
  [-.pixmaps]tb_minwidth.xpm
 gui_at_sb.obj : gui_at_sb.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h gui_at_sb.h
 gui_at_fs.obj : gui_at_fs.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h gui_at_sb.h
 pty.obj : pty.c vim.h [.auto]config.h feature.h os_unix.h   \
- ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h beval.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h gui.h beval.h \
  [.proto]gui_beval.pro option.h ex_cmds.h proto.h errors.h globals.h
 if_perl.obj : [.auto]if_perl.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 if_perlsfio.obj : if_perlsfio.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 if_python.obj : if_python.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 if_tcl.obj : if_tcl.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 if_ruby.obj : if_ruby.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h version.h
 if_lua.obj : if_lua.c vim.h [.auto]config.h feature.h os_unix.h \
  errors.h globals.h version.h
 beval.obj : beval.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h option.h ex_cmds.h proto.h \
  errors.h globals.h
 gui_beval.obj : gui_beval.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h
 netbeans.obj : netbeans.c vim.h [.auto]config.h feature.h os_unix.h \
- ascii.h keymap.h term.h macros.h structs.h regexp.h \
+ ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
  errors.h globals.h version.h
 gui_xmdlg.obj : gui_xmdlg.c [.auto]config.h vim.h feature.h os_unix.h

src/Makefile

@@ -3139,7 +3139,7 @@ auto/gui_gtk_gresources.h: gui_gtk_res.xml $(GUI_GTK_RES_INPUTS)
 # that are not taken care of by "make depend".
 VIM_H_DEPENDENCIES = \
 	vim.h protodef.h auto/config.h feature.h os_unix.h \
-	auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+	auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
 	structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
 	proto.h globals.h errors.h
 
@@ -3721,464 +3721,464 @@ installglinks_haiku: $(HAIKU_GLINKS) install_haiku_extra
 ### (automatically generated by 'make depend')
 ### Dependencies:
 objects/alloc.o: alloc.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/arabic.o: arabic.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/arglist.o: arglist.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/autocmd.o: autocmd.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/beval.o: beval.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/blob.o: blob.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/blowfish.o: blowfish.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/buffer.o: buffer.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h version.h
 objects/change.o: change.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/charset.o: charset.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/cindent.o: cindent.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/clientserver.o: clientserver.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/clipboard.o: clipboard.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/cmdexpand.o: cmdexpand.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/cmdhist.o: cmdhist.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/crypt.o: crypt.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/crypt_zip.o: crypt_zip.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/debugger.o: debugger.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/dict.o: dict.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/diff.o: diff.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h xdiff/xdiff.h xdiff/../vim.h
 objects/digraph.o: digraph.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/drawline.o: drawline.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/drawscreen.o: drawscreen.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/edit.o: edit.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/eval.o: eval.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/evalbuffer.o: evalbuffer.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/evalfunc.o: evalfunc.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h version.h
 objects/evalvars.o: evalvars.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h version.h
 objects/evalwindow.o: evalwindow.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/ex_cmds.o: ex_cmds.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h version.h
 objects/ex_cmds2.o: ex_cmds2.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h version.h
 objects/ex_docmd.o: ex_docmd.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h ex_cmdidxs.h
 objects/ex_eval.o: ex_eval.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/ex_getln.o: ex_getln.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/fileio.o: fileio.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/filepath.o: filepath.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/findfile.o: findfile.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/float.o: float.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/fold.o: fold.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/getchar.o: getchar.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/gui_xim.o: gui_xim.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/hardcopy.o: hardcopy.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h version.h
 objects/hashtab.o: hashtab.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/help.o: help.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/highlight.o: highlight.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/if_cscope.o: if_cscope.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h if_cscope.h
 objects/if_xcmdsrv.o: if_xcmdsrv.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h version.h
 objects/indent.o: indent.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/insexpand.o: insexpand.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/json.o: json.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/list.o: list.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/locale.o: locale.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/main.o: main.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/map.o: map.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/mark.o: mark.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/match.o: match.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/mbyte.o: mbyte.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/memfile.o: memfile.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/memline.o: memline.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/menu.o: menu.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/message.o: message.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/misc1.o: misc1.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h version.h
 objects/misc2.o: misc2.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/mouse.o: mouse.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/move.o: move.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/normal.o: normal.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/ops.o: ops.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/option.o: option.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h optiondefs.h
 objects/optionstr.o: optionstr.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/os_unix.o: os_unix.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h os_unixx.h
 objects/pathdef.o: auto/pathdef.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/popupmenu.o: popupmenu.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/popupwin.o: popupwin.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/profiler.o: profiler.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/pty.o: pty.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/quickfix.o: quickfix.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/regexp.o: regexp.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h regexp_bt.c regexp_nfa.c
 objects/register.o: register.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/screen.o: screen.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/scriptfile.o: scriptfile.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/search.o: search.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/session.o: session.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/sha256.o: sha256.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/sign.o: sign.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/sound.o: sound.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/spell.o: spell.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/spellfile.o: spellfile.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/spellsuggest.o: spellsuggest.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/strings.o: strings.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/syntax.o: syntax.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/tag.o: tag.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/term.o: term.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/terminal.o: terminal.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h libvterm/include/vterm.h \
  libvterm/include/vterm_keycodes.h
 objects/testing.o: testing.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/textformat.o: textformat.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/textobject.o: textobject.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/textprop.o: textprop.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/time.o: time.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/typval.o: typval.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/ui.o: ui.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/undo.o: undo.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/usercmd.o: usercmd.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/userfunc.o: userfunc.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/version.o: version.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h version.h
 objects/vim9compile.o: vim9compile.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h vim9.h
 objects/vim9execute.o: vim9execute.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h vim9.h
 objects/vim9script.o: vim9script.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h vim9.h
 objects/vim9type.o: vim9type.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/viminfo.o: viminfo.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h version.h
 objects/window.o: window.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/bufwrite.o: bufwrite.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/gui.o: gui.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/gui_gtk.o: gui_gtk.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h gui_gtk_f.h
 objects/gui_gtk_f.o: gui_gtk_f.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h gui_gtk_f.h
 objects/gui_motif.o: gui_motif.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h gui_xmebw.h ../pixmaps/alert.xpm \
  ../pixmaps/error.xpm ../pixmaps/generic.xpm ../pixmaps/info.xpm \
@@ -4199,15 +4199,15 @@ objects/gui_motif.o: gui_motif.c vim.h protodef.h auto/config.h feature.h \
  ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \
  ../pixmaps/tb_minwidth.xpm
 objects/gui_xmdlg.o: gui_xmdlg.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/gui_xmebw.o: gui_xmebw.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h gui_xmebwp.h gui_xmebw.h
 objects/gui_athena.o: gui_athena.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h gui_at_sb.h gui_x11_pm.h \
  ../pixmaps/tb_new.xpm ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm \
@@ -4226,89 +4226,89 @@ objects/gui_athena.o: gui_athena.c vim.h protodef.h auto/config.h feature.h \
  ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \
  ../pixmaps/tb_minwidth.xpm
 objects/gui_gtk_x11.o: gui_gtk_x11.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h auto/gui_gtk_gresources.h gui_gtk_f.h \
  ../runtime/vim32x32.xpm ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm
 objects/gui_x11.o: gui_x11.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h ../runtime/vim32x32.xpm \
  ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm
 objects/gui_at_sb.o: gui_at_sb.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h gui_at_sb.h
 objects/gui_at_fs.o: gui_at_fs.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h gui_at_sb.h
 objects/gui_haiku.o: gui_haiku.cc vim.h protodef.h auto/config.h feature.h \
- os_unix.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h version.h
 objects/json_test.o: json_test.c main.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h json.c
 objects/kword_test.o: kword_test.c main.c vim.h protodef.h auto/config.h \
- feature.h os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h \
+ feature.h os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h \
  option.h beval.h proto/gui_beval.pro structs.h regexp.h gui.h alloc.h \
  ex_cmds.h spell.h proto.h globals.h errors.h charset.c
 objects/memfile_test.o: memfile_test.c main.c vim.h protodef.h auto/config.h \
- feature.h os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h \
+ feature.h os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h \
  option.h beval.h proto/gui_beval.pro structs.h regexp.h gui.h alloc.h \
  ex_cmds.h spell.h proto.h globals.h errors.h memfile.c
 objects/message_test.o: message_test.c main.c vim.h protodef.h auto/config.h \
- feature.h os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h \
+ feature.h os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h \
  option.h beval.h proto/gui_beval.pro structs.h regexp.h gui.h alloc.h \
  ex_cmds.h spell.h proto.h globals.h errors.h message.c
 objects/if_lua.o: if_lua.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h version.h
 objects/if_mzsch.o: if_mzsch.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h if_mzsch.h
 objects/if_perl.o: auto/if_perl.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/if_perlsfio.o: if_perlsfio.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/if_python.o: if_python.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h if_py_both.h
 objects/if_python3.o: if_python3.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h if_py_both.h
 objects/if_tcl.o: if_tcl.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/if_ruby.o: if_ruby.c protodef.h auto/config.h vim.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h version.h
 objects/gui_beval.o: gui_beval.c vim.h protodef.h auto/config.h feature.h \
- os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/netbeans.o: netbeans.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h version.h
 objects/job.o: job.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/channel.o: channel.c vim.h protodef.h auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
  proto.h globals.h errors.h
 objects/gui_gtk_gresources.o: auto/gui_gtk_gresources.c
@@ -4339,7 +4339,7 @@ objects/vterm_vterm.o: libvterm/src/vterm.c libvterm/src/vterm_internal.h \
 objects/xdiffi.o: xdiff/xdiffi.c xdiff/xinclude.h auto/config.h \
  xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \
  auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h \
  macros.h option.h beval.h proto/gui_beval.pro \
  structs.h regexp.h gui.h alloc.h \
  ex_cmds.h spell.h proto.h globals.h \
@@ -4348,7 +4348,7 @@ objects/xdiffi.o: xdiff/xdiffi.c xdiff/xinclude.h auto/config.h \
 objects/xemit.o: xdiff/xemit.c xdiff/xinclude.h auto/config.h \
  xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \
  auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h \
  macros.h option.h beval.h proto/gui_beval.pro \
  structs.h regexp.h gui.h alloc.h \
  ex_cmds.h spell.h proto.h globals.h \
@@ -4357,7 +4357,7 @@ objects/xemit.o: xdiff/xemit.c xdiff/xinclude.h auto/config.h \
 objects/xprepare.o: xdiff/xprepare.c xdiff/xinclude.h auto/config.h \
  xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \
  auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h \
  macros.h option.h beval.h proto/gui_beval.pro \
  structs.h regexp.h gui.h alloc.h \
  ex_cmds.h spell.h proto.h globals.h \
@@ -4366,7 +4366,7 @@ objects/xprepare.o: xdiff/xprepare.c xdiff/xinclude.h auto/config.h \
 objects/xutils.o: xdiff/xutils.c xdiff/xinclude.h auto/config.h \
  xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \
  auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h \
  macros.h option.h beval.h proto/gui_beval.pro \
  structs.h regexp.h gui.h alloc.h \
  ex_cmds.h spell.h proto.h globals.h \
@@ -4375,7 +4375,7 @@ objects/xutils.o: xdiff/xutils.c xdiff/xinclude.h auto/config.h \
 objects/xhistogram.o: xdiff/xhistogram.c xdiff/xinclude.h auto/config.h \
  xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \
  auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h \
  macros.h option.h beval.h proto/gui_beval.pro \
  structs.h regexp.h gui.h alloc.h \
  ex_cmds.h spell.h proto.h globals.h \
@@ -4384,7 +4384,7 @@ objects/xhistogram.o: xdiff/xhistogram.c xdiff/xinclude.h auto/config.h \
 objects/xpatience.o: xdiff/xpatience.c xdiff/xinclude.h auto/config.h \
  xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \
  auto/config.h feature.h os_unix.h \
- auto/osdef.h ascii.h keymap.h term.h \
+ auto/osdef.h ascii.h keymap.h termdefs.h \
  macros.h option.h beval.h proto/gui_beval.pro \
  structs.h regexp.h gui.h alloc.h \
  ex_cmds.h spell.h proto.h globals.h \

src/alloc.c

@@ -421,9 +421,7 @@ free_all_mem(void)
 # endif
     }
 
-# ifdef FEAT_TITLE
     free_titles();
-# endif
 # if defined(FEAT_SEARCHPATH)
     free_findfile();
 # endif
@@ -442,6 +440,7 @@ free_all_mem(void)
     free_prev_shellcmd();
     free_regexp_stuff();
     free_tag_stuff();
+    free_xim_stuff();
     free_cd_dir();
 # ifdef FEAT_SIGNS
     free_signs();
@@ -561,6 +560,7 @@ free_all_mem(void)
 # endif
 
     free_termoptions();
+    free_cur_term();
 
     // screenlines (can't display anything now!)
     free_screenlines();
@@ -573,6 +573,9 @@ free_all_mem(void)
 # endif
 # ifdef FEAT_GUI_GTK
     gui_mch_free_all();
+# endif
+# ifdef FEAT_TCL
+    vim_tcl_finalize();
 # endif
     clear_hl_tables();