patch 8.2.4229: possible crash when invoking timer callback fails

Problem:    Possible crash when invoking timer callback fails.
Solution:   Initialize the typval.  Give an error for an empty callback.
            (closes #9636)

.github/workflows/ci.yml

@@ -64,23 +64,29 @@ jobs:
 
       - name: Install packages
         run: |
-          sudo apt update && sudo apt install -y \
-            autoconf \
-            lcov \
+          PKGS=( \
             gettext \
-            libcanberra-dev \
-            libperl-dev \
-            python-dev \
-            python3-dev \
-            liblua5.3-dev \
-            lua5.3 \
-            ruby-dev \
-            tcl-dev \
-            cscope \
             libgtk2.0-dev \
             desktop-file-utils \
             libtool-bin \
-            libsodium-dev
+          )
+          if ${{ matrix.features == 'huge' }}; then
+            PKGS+=( \
+              autoconf \
+              lcov \
+              libcanberra-dev \
+              libperl-dev \
+              python-dev \
+              python3-dev \
+              liblua5.3-dev \
+              lua5.3 \
+              ruby-dev \
+              tcl-dev \
+              cscope \
+              libsodium-dev \
+            )
+          fi
+          sudo apt update && sudo apt install -y "${PKGS[@]}"
 
       - name: Install clang-13
         if: matrix.compiler == 'clang'
@@ -92,6 +98,7 @@ jobs:
           sudo update-alternatives --install /usr/bin/clang clang /usr/bin/clang-13 100
           sudo update-alternatives --set clang /usr/bin/clang-13
           sudo update-alternatives --install /usr/bin/llvm-cov llvm-cov /usr/bin/llvm-cov-13 100
+          sudo update-alternatives --install /usr/bin/asan_symbolize asan_symbolize /usr/bin/asan_symbolize-13 100
 
       - name: Set up environment
         run: |
@@ -119,7 +126,6 @@ jobs:
             ;;
           esac
 
-          CFLAGS=""
           if ${{ matrix.coverage == true }}; then
             CFLAGS="$CFLAGS --coverage -DUSE_GCOV_FLUSH"
             echo "LDFLAGS=--coverage"
@@ -218,45 +224,51 @@ jobs:
           do_test() { sg audio "sg $(id -gn) '$*'"; }
           do_test make ${SHADOWOPT} ${TEST}
 
-      #      - name: Coveralls
-      #        if: matrix.coverage && success() && github.event_name != 'pull_request'
-      #        env:
-      #          COVERALLS_REPO_TOKEN: ${{ secrets.COVERALLS_REPO_TOKEN }}
-      #          COVERALLS_PARALLEL: true
-      #          TRAVIS_JOB_ID: ${{ github.run_id }}
-      #        run: |
-      #          sudo apt-get install -y python3-setuptools python3-wheel
-      #          sudo -H pip3 install pip -U
-      #          # needed for https support for coveralls building cffi only works with gcc, not with clang
-      #          CC=gcc pip3 install --user cpp-coveralls pyopenssl ndg-httpsclient pyasn1
-      #          ~/.local/bin/coveralls -b "${SRCDIR}" -x .xs -e "${SRCDIR}"/if_perl.c -e "${SRCDIR}"/xxd -e "${SRCDIR}"/libvterm --encodings utf-8
+      # - name: Coveralls
+      #   if: matrix.coverage && success() && github.event_name != 'pull_request'
+      #   env:
+      #     COVERALLS_REPO_TOKEN: ${{ secrets.COVERALLS_REPO_TOKEN }}
+      #     COVERALLS_PARALLEL: true
+      #     TRAVIS_JOB_ID: ${{ github.run_id }}
+      #   run: |
+      #     sudo apt-get install -y python3-setuptools python3-wheel
+      #     sudo -H pip3 install pip -U
+      #     # needed for https support for coveralls building cffi only works with gcc, not with clang
+      #     CC=gcc pip3 install --user cpp-coveralls pyopenssl ndg-httpsclient pyasn1
+      #     ~/.local/bin/coveralls -b "${SRCDIR}" -x .xs -e "${SRCDIR}"/if_perl.c -e "${SRCDIR}"/xxd -e "${SRCDIR}"/libvterm --encodings utf-8
 
-      - name: Codecov
+      - name: Generate gcov files
         if: matrix.coverage && success()
         run: |
           cd "${SRCDIR}"
-          bash <(curl -s https://codecov.io/bash) -F "${{ matrix.features }}-${{ matrix.compiler }}-${{ matrix.extra }}"
+          find . -type f -name '*.gcno' -exec gcov -pb {} + || true
+
+      - name: Codecov
+        if: matrix.coverage && success()
+        uses: codecov/codecov-action@v2
+        with:
+          flags: ${{ matrix.features }}-${{ matrix.compiler }}-${{ matrix.extra }}
 
       - name: ASan logs
         if: contains(matrix.extra, 'asan') && !cancelled()
         run: |
           for f in $(grep -lR '#[[:digit:]]* *0x[[:digit:]a-fA-F]*' "${LOG_DIR}"); do
-            asan_symbolize-13 -l "$f"
+            asan_symbolize -l "$f"
             false # in order to fail a job
           done
 
-  #  coveralls:
-  #    runs-on: ubuntu-18.04
+  # coveralls:
+  #   runs-on: ubuntu-18.04
   #
-  #    needs: linux
-  #    if: always() && github.event_name != 'pull_request'
+  #   needs: linux
+  #   if: always() && github.event_name != 'pull_request'
   #
-  #    steps:
-  #      - name: Parallel finished
-  #        env:
-  #          COVERALLS_REPO_TOKEN: ${{ secrets.COVERALLS_REPO_TOKEN }}
-  #        run: |
-  #          curl -k "https://coveralls.io/webhook?repo_token=${COVERALLS_REPO_TOKEN}" -d "payload[build_num]=${GITHUB_RUN_ID}&payload[status]=done"
+  #   steps:
+  #     - name: Parallel finished
+  #       env:
+  #         COVERALLS_REPO_TOKEN: ${{ secrets.COVERALLS_REPO_TOKEN }}
+  #       run: |
+  #         curl -k "https://coveralls.io/webhook?repo_token=${COVERALLS_REPO_TOKEN}" -d "payload[build_num]=${GITHUB_RUN_ID}&payload[status]=done"
 
   macos:
     runs-on: macos-latest
@@ -277,6 +289,7 @@ jobs:
       - uses: actions/checkout@v2
 
       - name: Install packages
+        if: matrix.features == 'huge'
         env:
           HOMEBREW_NO_AUTO_UPDATE: 1
         run: |
@@ -459,17 +472,15 @@ jobs:
         run: |
           call "%VCVARSALL%" ${{ matrix.vcarch }}
           cd src
-          :: Filter out the progress bar from the build log
-          sed -e "s/@<<$/@<< | sed -e 's#.*\\\\r.*##'/" Make_mvc.mak > Make_mvc2.mak
           if "${{ matrix.features }}"=="HUGE" (
-            nmake -nologo -f Make_mvc2.mak ^
+            nmake -nologo -f Make_mvc.mak ^
               FEATURES=${{ matrix.features }} ^
               GUI=yes IME=yes ICONV=yes VIMDLL=yes ^
               DYNAMIC_LUA=yes LUA=%LUA_DIR% ^
               DYNAMIC_PYTHON=yes PYTHON=%PYTHON_DIR% ^
               DYNAMIC_PYTHON3=yes PYTHON3=%PYTHON3_DIR%
           ) else (
-            nmake -nologo -f Make_mvc2.mak ^
+            nmake -nologo -f Make_mvc.mak ^
               FEATURES=${{ matrix.features }} ^
               GUI=yes IME=yes ICONV=yes VIMDLL=yes
           )

Filelist

@@ -497,7 +497,6 @@ SRC_UNIX =	\
 SRC_DOS_UNIX =	\
 		src/gui_xim.c \
 		src/if_cscope.c \
-		src/if_cscope.h \
 		src/if_lua.c \
 		src/if_mzsch.c \
 		src/if_mzsch.h \
@@ -544,18 +543,14 @@ SRC_DOS =	\
 		tools/rename.bat \
 		src/bigvim.bat \
 		src/bigvim64.bat \
-		src/msvcsetup.bat \
 		src/msvc2008.bat \
 		src/msvc2010.bat \
 		src/msvc2015.bat \
 		src/msys32.bat \
 		src/msys64.bat \
-		src/dimm.idl \
 		src/dlldata.c \
 		src/dosinst.c \
 		src/dosinst.h \
-		src/glbl_ime.cpp \
-		src/glbl_ime.h \
 		src/gui_dwrite.cpp \
 		src/gui_dwrite.h \
 		src/gui_w32.c \

ci/appveyor.bat

@@ -5,11 +5,9 @@ setlocal ENABLEDELAYEDEXPANSION
 cd %APPVEYOR_BUILD_FOLDER%
 
 cd src
-:: Filter out the progress bar from the build log
-sed -e "s/@<<$/@<< | sed -e 's#.*\\\\r.*##'/" Make_mvc.mak > Make_mvc2.mak
 
 echo "Building MSVC 64bit console Version"
-nmake -f Make_mvc2.mak CPU=AMD64 ^
+nmake -f Make_mvc.mak CPU=AMD64 ^
     OLE=no GUI=no IME=yes ICONV=yes DEBUG=no ^
     FEATURES=%FEATURE%
 if not exist vim.exe (
@@ -21,13 +19,13 @@ if not exist vim.exe (
 :: GUI needs to be last, so that testing works
 echo "Building MSVC 64bit GUI Version"
 if "%FEATURE%" == "HUGE" (
-    nmake -f Make_mvc2.mak CPU=AMD64 ^
+    nmake -f Make_mvc.mak CPU=AMD64 ^
         OLE=no GUI=yes IME=yes ICONV=yes DEBUG=no POSTSCRIPT=yes ^
         PYTHON_VER=27 DYNAMIC_PYTHON=yes PYTHON=C:\Python27-x64 ^
         PYTHON3_VER=35 DYNAMIC_PYTHON3=yes PYTHON3=C:\Python35-x64 ^
         FEATURES=%FEATURE%
 ) ELSE (
-    nmake -f Make_mvc2.mak CPU=AMD64 ^
+    nmake -f Make_mvc.mak CPU=AMD64 ^
         OLE=no GUI=yes IME=yes ICONV=yes DEBUG=no ^
         FEATURES=%FEATURE%
 )

ci/config.mk.clang-12.sed

@@ -1,3 +1,3 @@
 # Clang 12 (or Apple clang 13) and later makes a warning '-Wcompound-token-split-by-macro' enable by default.
-/^PERL_CFLAGS[[:blank:]]*=/s/$/ -Wno-error=compound-token-split-by-macro/
-/^RUBY_CFLAGS[[:blank:]]*=/s/$/ -Wno-error=compound-token-split-by-macro/
+/^PERL_CFLAGS_EXTRA[[:blank:]]*=/s/$/ -Wno-error=compound-token-split-by-macro/
+/^RUBY_CFLAGS_EXTRA[[:blank:]]*=/s/$/ -Wno-error=compound-token-split-by-macro/

ci/config.mk.clang.sed

@@ -1,2 +1,2 @@
 /^CFLAGS[[:blank:]]*=/s/$/ -Wno-error=missing-field-initializers/
-/^RUBY_CFLAGS[[:blank:]]*=/s/$/ -Wno-error=unknown-attributes -Wno-error=ignored-attributes/
+/^RUBY_CFLAGS_EXTRA[[:blank:]]*=/s/$/ -Wno-error=unknown-attributes -Wno-error=ignored-attributes/

ci/config.mk.sed

@@ -1,2 +1,3 @@
 /^CFLAGS[[:blank:]]*=/s/$/ -Wall -Wextra -Wshadow -Werror/
-/^PERL_CFLAGS[[:blank:]]*=/s/$/ -Wno-error=unused-function/
+/^PERL_CFLAGS_EXTRA[[:blank:]]*=/s/$/ -Wno-error=unused-function/
+/^RUBY_CFLAGS_EXTRA[[:blank:]]*=/s/$/ -Wno-error=unused-parameter/

runtime/autoload/dist/ft.vim

@@ -1,7 +1,7 @@
 " Vim functions for file type detection
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2021 Dec 17
+" Last Change:	2022 Jan 11
 
 " These functions are moved here from runtime/filetype.vim to make startup
 " faster.
@@ -67,13 +67,29 @@ func dist#ft#FTasmsyntax()
   endif
 endfunc
 
-" Check if one of the first five lines contains "VB_Name".  In that case it is
-" probably a Visual Basic file.  Otherwise it's assumed to be "alt" filetype.
-func dist#ft#FTVB(alt)
-  if getline(1).getline(2).getline(3).getline(4).getline(5) =~? 'VB_Name\|Begin VB\.\(Form\|MDIForm\|UserControl\)'
+func dist#ft#FTbas()
+  if exists("g:filetype_bas")
+    exe "setf " . g:filetype_bas
+    return
+  endif
+
+  " most frequent FreeBASIC-specific keywords in distro files
+  let fb_keywords = '\c^\s*\%(extern\|var\|enum\|private\|scope\|union\|byref\|operator\|constructor\|delete\|namespace\|public\|property\|with\|destructor\|using\)\>\%(\s*[:=(]\)\@!'
+  let fb_preproc  = '\c^\s*\%(#\a\+\|option\s\+\%(byval\|dynamic\|escape\|\%(no\)\=gosub\|nokeyword\|private\|static\)\>\)'
+  let fb_comment  = "^\\s*/'"
+  " OPTION EXPLICIT, without the leading underscore, is common to many dialects
+  let qb64_preproc = '\c^\s*\%($\a\+\|option\s\+\%(_explicit\|_\=explicitarray\)\>\)'
+
+  let lines = getline(1, min([line("$"), 100]))
+
+  if match(lines, fb_preproc) > -1 || match(lines, fb_comment) > -1 || match(lines, fb_keywords) > -1
+    setf freebasic
+  elseif match(lines, qb64_preproc) > -1
+    setf qb64
+  elseif match(lines, '\cVB_Name\|Begin VB\.\(Form\|MDIForm\|UserControl\)') > -1
     setf vb
   else
-    exe "setf " . a:alt
+    setf basic
   endif
 endfunc
 
@@ -829,6 +845,23 @@ func dist#ft#Dep3patch()
   endfor
 endfunc
 
+" This function checks the first 15 lines for appearance of 'FoamFile'
+" and then 'object' in a following line.
+" In that case, it's probably an OpenFOAM file
+func dist#ft#FTfoam()
+    let ffile = 0
+    let lnum = 1
+    while lnum <= 15
+      if getline(lnum) =~# '^FoamFile'
+	let ffile = 1
+      elseif ffile == 1 && getline(lnum) =~# '^\s*object'
+	setf foam
+	return
+      endif
+      let lnum = lnum + 1
+    endwhile
+endfunc
+
 " Restore 'cpoptions'
 let &cpo = s:cpo_save
 unlet s:cpo_save

runtime/doc/Makefile

@@ -16,6 +16,7 @@ include ../../src/auto/config.mk
 DOCS = \
 	arabic.txt \
 	autocmd.txt \
+	builtin.txt \
 	change.txt \
 	channel.txt \
 	cmdline.txt \
@@ -161,6 +162,7 @@ DOCS = \
 HTMLS = \
 	arabic.html \
 	autocmd.html \
+	builtin.html \
 	change.html \
 	channel.html \
 	cmdline.html \

runtime/doc/autocmd.txt

@@ -1,4 +1,4 @@
-*autocmd.txt*   For Vim version 8.2.  Last change: 2021 Nov 20
+*autocmd.txt*   For Vim version 8.2.  Last change: 2022 Jan 21
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -51,10 +51,10 @@ effects.  Be careful not to destroy your text.
 2. Defining autocommands				*autocmd-define*
 
 							*:au* *:autocmd*
-:au[tocmd] [group] {event} {pat} [++once] [++nested] {cmd}
+:au[tocmd] [group] {event} {aupat} [++once] [++nested] {cmd}
 			Add {cmd} to the list of commands that Vim will
 			execute automatically on {event} for a file matching
-			{pat} |autocmd-patterns|.
+			{aupat} |autocmd-patterns|.
 			Here {event} cannot be "*".  *E1155*
 			Note: A quote character is seen as argument to the
 			:autocmd and won't start a comment.
@@ -145,19 +145,19 @@ prompt.  When one command outputs two messages this can happen anyway.
 ==============================================================================
 3. Removing autocommands				*autocmd-remove*
 
-:au[tocmd]! [group] {event} {pat} [++once] [++nested] {cmd}
+:au[tocmd]! [group] {event} {aupat} [++once] [++nested] {cmd}
 			Remove all autocommands associated with {event} and
-			{pat}, and add the command {cmd}.
+			{aupat}, and add the command {cmd}.
 			See |autocmd-once| for [++once].
 			See |autocmd-nested| for [++nested].
 
-:au[tocmd]! [group] {event} {pat}
+:au[tocmd]! [group] {event} {aupat}
 			Remove all autocommands associated with {event} and
-			{pat}.
+			{aupat}.
 
-:au[tocmd]! [group] * {pat}
-			Remove all autocommands associated with {pat} for all
-			events.
+:au[tocmd]! [group] * {aupat}
+			Remove all autocommands associated with {aupat} for
+			all events.
 
 :au[tocmd]! [group] {event}
 			Remove ALL autocommands for {event}.
@@ -177,12 +177,12 @@ with ":augroup"); otherwise, Vim uses the group defined with [group].
 ==============================================================================
 4. Listing autocommands					*autocmd-list*
 
-:au[tocmd] [group] {event} {pat}
+:au[tocmd] [group] {event} {aupat}
 			Show the autocommands associated with {event} and
-			{pat}.
+			{aupat}.
 
-:au[tocmd] [group] * {pat}
-			Show the autocommands associated with {pat} for all
+:au[tocmd] [group] * {aupat}
+			Show the autocommands associated with {aupat} for all
 			events.
 
 :au[tocmd] [group] {event}
@@ -1211,7 +1211,7 @@ TextYankPost			After text has been yanked or deleted in the
 				Not triggered when |quote_| is used nor when
 				called recursively.
 				It is not allowed to change the buffer text,
-				see |textlock|.
+				see |textlock|. *E1064*
 				{only when compiled with the +eval feature}
 
 							*User*
@@ -1279,8 +1279,8 @@ VimResume			When the Vim instance is resumed after being
 	:autocmd VimResume * checktime
 <							*VimSuspend*
 VimSuspend			When the Vim instance is suspended.  Only when
-				CTRL-Z was typed inside Vim, not when the
-				SIGSTOP or SIGTSTP signal was sent to Vim.
+				CTRL-Z was typed inside Vim, or when the SIGTSTP
+				signal was sent to Vim, but not for SIGSTOP.
 							*WinClosed*
 WinClosed			After closing a window.  The pattern is
 				matched against the |window-ID|.  Both
@@ -1311,16 +1311,16 @@ WinNew				When a new window was created.  Not done for
 				Before a WinEnter event.
 
 ==============================================================================
-6. Patterns					*autocmd-patterns* *{pat}*
+6. Patterns					*autocmd-patterns* *{aupat}*
 
-The {pat} argument can be a comma separated list.  This works as if the
-command was given with each pattern separately.  Thus this command: >
+The {aupat} argument of `:autocmd` can be a comma separated list.  This works as
+if the command was given with each pattern separately.  Thus this command: >
 	:autocmd BufRead *.txt,*.info set et
 Is equivalent to: >
 	:autocmd BufRead *.txt set et
 	:autocmd BufRead *.info set et
 
-The file pattern {pat} is tested for a match against the file name in one of
+The file pattern {aupat} is tested for a match against the file name in one of
 two ways:
 1. When there is no '/' in the pattern, Vim checks for a match against only
    the tail part of the file name (without its leading directory path).

runtime/doc/change.txt

@@ -1,4 +1,4 @@
-*change.txt*    For Vim version 8.2.  Last change: 2021 Jun 23
+*change.txt*    For Vim version 8.2.  Last change: 2021 Dec 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -259,6 +259,9 @@ Or use "caw" (see |aw|).
 			line.
 			Adding [!] toggles 'autoindent' for the time this
 			command is executed.
+			This command is not supported in |Vim9| script,
+			because it is too easily confused with a variable
+			name.
 
 ==============================================================================
 3. Simple changes					*simple-change*
@@ -1374,6 +1377,9 @@ The next three commands always work on whole lines.
 
 							*:t*
 :t			Synonym for copy.
+			This command is not supported in |Vim9| script,
+			because it is too easily confused with a variable
+			name.
 
 :[range]m[ove] {address}			*:m* *:mo* *:move* *E134*
 			Move the lines given by [range] to below the line
@@ -1671,7 +1677,8 @@ r	Automatically insert the current comment leader after hitting
 	<Enter> in Insert mode.
 							*fo-o*
 o	Automatically insert the current comment leader after hitting 'o' or
-	'O' in Normal mode.
+	'O' in Normal mode.  In case comment is unwanted in a specific place
+	use CTRL-U to quickly delete it. |i_CTRL-U|
 							*fo-q*
 q	Allow formatting of comments with "gq".
 	Note that formatting will not change blank lines or lines containing

runtime/doc/cmdline.txt

@@ -1,4 +1,4 @@
-*cmdline.txt*   For Vim version 8.2.  Last change: 2021 Dec 04
+*cmdline.txt*   For Vim version 8.2.  Last change: 2022 Jan 08
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -705,6 +705,15 @@ Some Ex commands accept a line range in front of them.  This is noted as
 
 The basics are explained in section |10.3| of the user manual.
 
+In |Vim9| script a range needs to be prefixed with a colon to avoid ambiguity
+with continuation lines.  For example, "+" can be used for a range but is also
+a continuation of an expression: >
+	var result = start
+	+ print
+If the "+" is a range then it must be prefixed with a colon: >
+	var result = start
+	:+ print
+<
 						*:,* *:;*
 When separated with ';' the cursor position will be set to that line
 before interpreting the next line specifier.  This doesn't happen for ','.
@@ -739,7 +748,8 @@ Line numbers may be specified with:		*:range* *{address}*
 
 Each may be followed (several times) by '+' or '-' and an optional number.
 This number is added or subtracted from the preceding line number.  If the
-number is omitted, 1 is used.
+number is omitted, 1 is used.  If there is nothing before the '+' or '-' then
+the current line is used.
 
 The "/" and "?" after {pattern} are required to separate the pattern from
 anything that follows.
@@ -769,7 +779,7 @@ Some commands allow for a count after the command.  This count is used as the
 number of lines to be used, starting with the line given in the last line
 specifier (the default is the cursor line).  The commands that accept a count
 are the ones that use a range but do not have a file name argument (because
-a file name can also be a number).
+a file name can also be a number).  The count cannot be negative.
 
 Examples: >
 	:s/x/X/g 5	substitute 'x' by 'X' in the current line and four
@@ -940,6 +950,7 @@ Note: these are typed literally, they are not special keys!
 		   and "script {file-name}[{lnum}]" for a script line, and
 		   ".." in between items.  E.g.:
 		   "function {function-name1}[{lnum}]..{function-name2}[{lnum}]"
+		   If there is no call stack you get error *E489* .
 							*:<slnum>* *<slnum>*
 	<slnum>	   When executing a ":source" command, is replaced with the
 		   line number.  *E842*

runtime/doc/diff.txt

@@ -1,4 +1,4 @@
-*diff.txt*      For Vim version 8.2.  Last change: 2021 May 24
+*diff.txt*      For Vim version 8.2.  Last change: 2022 Jan 22
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -335,8 +335,9 @@ After setting this variable, reload the syntax script: >
 
 FINDING THE DIFFERENCES					*diff-diffexpr*
 
-The 'diffexpr' option can be set to use something else than the standard
-"diff" program to compare two files and find the differences. *E959*
+The 'diffexpr' option can be set to use something else than the internal diff
+support or the standard "diff" program to compare two files and find the
+differences. *E959*
 
 When 'diffexpr' is empty, Vim uses this command to find the differences
 between file1 and file2: >
@@ -369,7 +370,7 @@ format mentioned.  These variables are set to the file names used:
 
 	v:fname_in		original file
 	v:fname_new		new version of the same file
-	v:fname_out		resulting diff file
+	v:fname_out		where to write the resulting diff file
 
 Additionally, 'diffexpr' should take care of "icase" and "iwhite" in the
 'diffopt' option.  'diffexpr' cannot change the value of 'lines' and
@@ -398,6 +399,13 @@ mode, so that a CTRL-Z doesn't end the text on DOS.
 The `redraw!` command may not be needed, depending on whether executing a
 shell command shows something on the display or not.
 
+If the 'diffexpr' expression starts with s: or |<SID>|, then it is replaced
+with the script ID (|local-function|). Example: >
+		set diffexpr=s:MyDiffExpr()
+		set diffexpr=<SID>SomeDiffExpr()
+Otherwise, the expression is evaluated in the context of the script where the
+option was set, thus script-local items are available.
+
 						*E810* *E97*
 Vim will do a test if the diff output looks alright.  If it doesn't, you will
 get an error message.  Possible causes:
@@ -449,4 +457,12 @@ evaluating 'patchexpr'.  This hopefully avoids that files in the current
 directory are accidentally patched.  Vim will also delete files starting with
 v:fname_in and ending in ".rej" and ".orig".
 
+If the 'patchexpr' expression starts with s: or |<SID>|, then it is replaced
+with the script ID (|local-function|). Example: >
+		set patchexpr=s:MyPatchExpr()
+		set patchexpr=<SID>SomePatchExpr()
+Otherwise, the expression is evaluated in the context of the script where the
+option was set, thus script-local items are available.
+
+
  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/editing.txt

@@ -1,4 +1,4 @@
-*editing.txt*   For Vim version 8.2.  Last change: 2021 Dec 11
+*editing.txt*   For Vim version 8.2.  Last change: 2022 Jan 21
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -433,7 +433,7 @@ This also works for most other systems, with the restriction that the
 backticks must be around the whole item.  It is not possible to have text
 directly before the first or just after the last backtick.
 
-							*`=*
+						*`=* *E1083*
 You can have the backticks expanded as a Vim expression, instead of as an
 external command, by putting an equal sign right after the first backtick,
 e.g.: >
@@ -890,7 +890,7 @@ Note: When the 'write' option is off, you are not able to write any file.
 
 							*:w* *:write*
 					*E502* *E503* *E504* *E505*
-					*E512* *E514* *E667* *E796* *E949*
+					*E512* *E514* *E667* *E949*
 :w[rite] [++opt]	Write the whole buffer to the current file.  This is
 			the normal way to save changes to a file.  It fails
 			when the 'readonly' option is set or when there is
@@ -1147,6 +1147,9 @@ The names can be in upper- or lowercase.
 			made.
 			When 'hidden' is set and there are more windows, the
 			current buffer becomes hidden, after writing the file.
+			This command is not supported in |Vim9| script,
+			because it is too easily confused with a variable
+			name.
 
 							*:exi* *:exit*
 :[range]exi[t][!] [++opt] [file]
@@ -1385,7 +1388,8 @@ becomes the current directory for that window.  Windows where the |:lcd|
 command has not been used stick to the global or tab-local current directory.
 When jumping to another window the current directory is changed to the last
 specified local current directory.  If none was specified, the global or
-tab-local current directory is used.
+tab-local current directory is used.  When creating a new window it inherits
+the local directory of the current window.
 
 When a |:tcd| command has been used for a tab page, the specified directory
 becomes the current directory for the current tab page and the current window.
@@ -1767,7 +1771,7 @@ There are three different types of searching:
 	/u/user_x/work/include
 	/u/user_x/include
 
-<   Note: If your 'path' setting includes an non-existing directory, Vim will
+<   Note: If your 'path' setting includes a non-existing directory, Vim will
    skip the non-existing directory, but continues searching in the parent of
    the non-existing directory if upwards searching is used.  E.g. when
    searching "../include" and that doesn't exist, and upward searching is

runtime/doc/filetype.txt

@@ -1,4 +1,4 @@
-*filetype.txt*  For Vim version 8.2.  Last change: 2021 Sep 22
+*filetype.txt*  For Vim version 8.2.  Last change: 2022 Jan 21
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -133,14 +133,15 @@ shell script: "#!/bin/csh".
 argument was used.
 
 							*filetype-overrule*
-When the same extension is used for two filetypes, Vim tries to guess what
-kind of file it is.  This doesn't always work.  A number of global variables
-can be used to overrule the filetype used for certain extensions:
+When the same extension is used for multiple filetypes, Vim tries to guess
+what kind of file it is.  This doesn't always work.  A number of global
+variables can be used to overrule the filetype used for certain extensions:
 
 	file name	variable ~
 	*.asa		g:filetype_asa	|ft-aspvbs-syntax| |ft-aspperl-syntax|
 	*.asm		g:asmsyntax	|ft-asm-syntax|
 	*.asp		g:filetype_asp	|ft-aspvbs-syntax| |ft-aspperl-syntax|
+	*.bas		g:filetype_bas	|ft-basic-syntax|
 	*.fs		g:filetype_fs   |ft-forth-syntax|
 	*.i		g:filetype_i	|ft-progress-syntax|
 	*.inc		g:filetype_inc
@@ -358,12 +359,12 @@ define yourself.  There are a few ways to avoid this:
    You need to define your own mapping before the plugin is loaded (before
    editing a file of that type).  The plugin will then skip installing the
    default mapping.
-						*no_mail_maps*
+					*no_mail_maps* *g:no_mail_maps*
 3. Disable defining mappings for a specific filetype by setting a variable,
    which contains the name of the filetype.  For the "mail" filetype this
    would be: >
 	:let no_mail_maps = 1
-<						*no_plugin_maps*
+<					*no_plugin_maps* *g:no_plugin_maps*
 4. Disable defining mappings for all filetypes by setting a variable: >
 	:let no_plugin_maps = 1
 <

runtime/doc/fold.txt

@@ -1,4 +1,4 @@
-*fold.txt*      For Vim version 8.2.  Last change: 2021 Jul 13
+*fold.txt*      For Vim version 8.2.  Last change: 2022 Jan 22
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -121,6 +121,11 @@ method can be very slow!
 Try to avoid the "=", "a" and "s" return values, since Vim often has to search
 backwards for a line for which the fold level is defined.  This can be slow.
 
+If the 'foldexpr' expression starts with s: or |<SID>|, then it is replaced
+with the script ID (|local-function|). Examples: >
+		set foldexpr=s:MyFoldExpr()
+		set foldexpr=<SID>SomeFoldExpr()
+<
 An example of using "a1" and "s1": For a multi-line C comment, a line
 containing "/*" would return "a1" to start a fold, and a line containing "*/"
 would return "s1" to end the fold after that line: >
@@ -506,7 +511,10 @@ Note the use of backslashes to avoid some characters to be interpreted by the
     :endfunction
 
 Evaluating 'foldtext' is done in the |sandbox|.  The current window is set to
-the window that displays the line.  Errors are ignored.
+the window that displays the line.  The context is set to the script where the
+option was last set.
+
+Errors are ignored.  For debugging set the 'debug' option to "throw".
 
 The default value is |foldtext()|.  This returns a reasonable text for most
 types of folding.  If you don't like it, you can specify your own 'foldtext'
@@ -524,6 +532,11 @@ The resulting line is truncated to fit in the window, it never wraps.
 When there is room after the text, it is filled with the character specified
 by 'fillchars'.
 
+If the 'foldtext' expression starts with s: or |<SID>|, then it is replaced
+with the script ID (|local-function|). Examples: >
+		set foldtext=s:MyFoldText()
+		set foldtext=<SID>SomeFoldText()
+<
 Note that backslashes need to be used for characters that the ":set" command
 handles differently: Space, backslash and double-quote. |option-backslash|
 

runtime/doc/help.txt

@@ -1,4 +1,4 @@
-*help.txt*	For Vim version 8.2.  Last change: 2020 Aug 15
+*help.txt*	For Vim version 8.2.  Last change: 2021 Dec 27
 
 			VIM - main help file
 									 k
@@ -136,6 +136,7 @@ Advanced editing ~
 |diff.txt|	working with two to eight versions of the same file
 |autocmd.txt|	automatically executing commands on an event
 |eval.txt|	expression evaluation, conditional commands
+|builtin.txt|	builtin functions
 |channel.txt|	Jobs, Channels, inter-process communication
 |fold.txt|	hide (fold) ranges of lines
 

runtime/doc/helphelp.txt

@@ -1,4 +1,4 @@
-*helphelp.txt*	For Vim version 8.2.  Last change: 2021 Dec 13
+*helphelp.txt*	For Vim version 8.2.  Last change: 2022 Jan 08
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -224,7 +224,7 @@ command: >
 			dialog.  {only when compiled with |+GUI_GTK|}
 
 					*:helpt* *:helptags*
-				*E154* *E150* *E151* *E152* *E153* *E670*
+				*E150* *E151* *E152* *E153* *E154* *E670*
 :helpt[ags] [++t] {dir}
 			Generate the help tags file(s) for directory {dir}.
 			When {dir} is ALL then all "doc" directories in

runtime/doc/if_cscop.txt

@@ -1,4 +1,4 @@
-*if_cscop.txt*  For Vim version 8.2.  Last change: 2019 May 05
+*if_cscop.txt*  For Vim version 8.2.  Last change: 2022 Jan 08
 
 
 		  VIM REFERENCE MANUAL    by Andy Kahn
@@ -89,7 +89,7 @@ suggested use.)
 ==============================================================================
 2. Cscope related commands				*cscope-commands*
 
-		*:cscope* *:cs* *:scs* *:scscope* *E259* *E262* *E561* *E560*
+		*:cscope* *:cs* *:scs* *:scscope* *E259* *E262* *E560* *E561*
 All cscope commands are accessed through suboptions to the cscope commands.
 	`:cscope` or `:cs` is the main command
 	`:scscope` or `:scs` does the same and splits the window

runtime/doc/if_perl.txt

@@ -1,4 +1,4 @@
-*if_perl.txt*   For Vim version 8.2.  Last change: 2019 Dec 07
+*if_perl.txt*   For Vim version 8.2.  Last change: 2022 Jan 08
 
 
 		  VIM REFERENCE MANUAL    by Sven Verdoolaege
@@ -104,7 +104,6 @@ Here are some things you can try: >
   :perl VIM::Msg("hello")
   :perl $line = $curbuf->Get(42)
 <
-							*E299*
 Executing Perl commands in the |sandbox| is limited.  ":perldo" will not be
 possible at all.  ":perl" will be evaluated in the Safe environment, if
 possible.

runtime/doc/if_tcl.txt

@@ -1,4 +1,4 @@
-*if_tcl.txt*    For Vim version 8.2.  Last change: 2021 May 27
+*if_tcl.txt*    For Vim version 8.2.  Last change: 2022 Jan 08
 
 
 		  VIM REFERENCE MANUAL    by Ingo Wilken
@@ -16,9 +16,9 @@ The Tcl Interface to Vim				*tcl* *Tcl* *TCL*
 8. Examples				|tcl-examples|
 9. Dynamic loading			|tcl-dynamic|
 
-*E280*
 {only available when Vim was compiled with the |+tcl| feature}
 
+							*E280*
 WARNING: There are probably still some bugs.  Please send bug reports,
 comments, ideas etc to <Ingo.Wilken@informatik.uni-oldenburg.de>
 

runtime/doc/indent.txt

@@ -879,7 +879,7 @@ For example, with N = 1, this will give:
 							*PHP_outdentphpescape*
 To indent PHP escape tags as the surrounding non-PHP code (only affects the
 PHP escape tags): >
-:let g:PHP_outdentphpescape = 0
+    :let g:PHP_outdentphpescape = 0
 -------------
 
 							*PHP_removeCRwhenUnix*
@@ -1206,7 +1206,7 @@ comments will be indented according to the correctly indented code.
 
 
 VIM							*ft-vim-indent*
-
+							*g:vim_indent_cont*
 For indenting Vim scripts there is one variable that specifies the amount of
 indent for a continuation line, a line that starts with a backslash: >
 

runtime/doc/insert.txt

@@ -1,4 +1,4 @@
-*insert.txt*    For Vim version 8.2.  Last change: 2021 Oct 24
+*insert.txt*    For Vim version 8.2.  Last change: 2021 Dec 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -84,6 +84,8 @@ CTRL-U		Delete all entered characters before the cursor in the current
 		line.  If there are no newly entered characters and
 		'backspace' is not empty, delete all characters before the
 		cursor in the current line.
+		If C-indenting is enabled the indent will be adjusted if the
+		line becomes blank.
 		See |i_backspacing| about joining lines.
 						*i_CTRL-I* *i_<Tab>* *i_Tab*
 <Tab> or CTRL-I Insert a tab.  If the 'expandtab' option is on, the
@@ -848,7 +850,7 @@ space is preferred).  Maximum line length is 510 bytes.
 
 For an example, imagine the 'thesaurus' file has a line like this: >
 	angry furious mad enraged
-<Placing the cursor after the letters "ang" and typing CTRL-X CTRL-T would
+Placing the cursor after the letters "ang" and typing CTRL-X CTRL-T would
 complete the word "angry"; subsequent presses would change the word to
 "furious", "mad" etc.
 
@@ -860,7 +862,7 @@ https://github.com/vim/vim/issues/629#issuecomment-443293282
 Unpack thesaurus_pkg.zip, put the thesaurus.txt file somewhere, e.g.
 ~/.vim/thesaurus/english.txt, and the 'thesaurus' option to this file name.
 
-					
+
 Completing keywords with 'thesaurusfunc'		*compl-thesaurusfunc*
 
 If the 'thesaurusfunc' option is set, then the user specified function is
@@ -1945,6 +1947,9 @@ When 'autoindent' is on, the indent for a new line is obtained from the
 previous line.  When 'smartindent' or 'cindent' is on, the indent for a line
 is automatically adjusted for C programs.
 
+'formatoptions' can be set to copy the comment leader when opening a new
+line.
+
 'textwidth' can be set to the maximum width for a line.  When a line becomes
 too long when appending characters a line break is automatically inserted.
 
@@ -1958,6 +1963,9 @@ too long when appending characters a line break is automatically inserted.
 			inserted after the current line.
 			Adding [!] toggles 'autoindent' for the time this
 			command is executed.
+			This command is not supported in |Vim9| script,
+			because it is too easily confused with a variable
+			name.
 
 							*:i* *:in* *:insert*
 :{range}i[nsert][!]	Insert several lines of text above the specified
@@ -1965,6 +1973,9 @@ too long when appending characters a line break is automatically inserted.
 			inserted before the current line.
 			Adding [!] toggles 'autoindent' for the time this
 			command is executed.
+			This command is not supported in |Vim9| script,
+			because it is too easily confused with a variable
+			name.
 
 These two commands will keep on asking for lines, until you type a line
 containing only a ".".  Watch out for lines starting with a backslash, see

runtime/doc/map.txt

@@ -1,4 +1,4 @@
-*map.txt*       For Vim version 8.2.  Last change: 2021 Dec 20
+*map.txt*       For Vim version 8.2.  Last change: 2022 Jan 23
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -6,7 +6,7 @@
 
 Key mapping, abbreviations and user-defined commands.
 
-This subject is introduced in sections |05.3|, |24.7| and |40.1| of the user
+This subject is introduced in sections |05.4|, |24.7| and |40.1| of the user
 manual.
 
 1. Key mapping			|key-mapping|
@@ -97,8 +97,7 @@ modes.
 			map command applies.  The mapping may remain defined
 			for other modes where it applies.
 			It also works when {lhs} matches the {rhs} of a
-			mapping. This is for when when an abbreviation
-			applied.
+			mapping. This is for when an abbreviation applied.
 			Note: Trailing spaces are included in the {lhs}.  This
 			unmap does NOT work: >
 				:map @@ foo
@@ -271,7 +270,7 @@ input. Example: >
 	endfunc
 	nnoremap <expr> <F3> <SID>OpenPopup()
 
-Also, keep in mind that the expression may be evaluated when looking for
+Keep in mind that the expression may be evaluated when looking for
 typeahead, before the previous command has been executed.  For example: >
 	func StoreColumn()
 	  let g:column = col('.')
@@ -285,6 +284,10 @@ This can be solved by inserting <Ignore> before the character that is
 expression-mapped: >
 	nmap ! f!<Ignore>x
 
+When defining a mapping in a |Vim9| script, the expression will be evaluated
+in the context of that script.  This means that script-local items can be
+accessed in the expression.
+
 Be very careful about side effects!  The expression is evaluated while
 obtaining characters, you may very well make the command dysfunctional.
 For this reason the following is blocked:
@@ -343,9 +346,24 @@ Example of using <Cmd> halfway Insert mode: >
 Unlike <expr> mappings, there are no special restrictions on the <Cmd>
 command: it is executed as if an (unrestricted) |autocommand| was invoked.
 
+						*<ScriptCmd>*
+<ScriptCmd> is like <Cmd> but sets the context to the script the mapping was
+defined in, for the duration of the command execution.  This is especially
+useful for |Vim9| script.  It also works to access an import, which is useful
+in a plugin using an autoload script: >
+	vim9script
+	import autoload 'implementation.vim' as impl
+	nnoremap <F4> <ScriptCmd>impl.DoTheWork()<CR>
+
+No matter where <F4> is typed, the "impl" import will be found in the script
+context of where the mapping was defined.  And since it's an autoload import,
+the "implementation.vim" script will only be loaded once <F4> is typed, not
+when the mapping is defined.
+
 Note:
-- Because <Cmd> avoids mode-changes it does not trigger |CmdlineEnter| and
-  |CmdlineLeave| events, because no user interaction is expected.
+- Because <Cmd> and <ScriptCmd> avoid mode-changes it does not trigger
+  |CmdlineEnter| and |CmdlineLeave| events, because no user interaction is
+  expected.
 - For the same reason, |keycodes| like <C-R><C-W> are interpreted as plain,
   unmapped keys.
 - The command is not echo'ed, no need for <silent>.
@@ -356,13 +374,14 @@ Note:
 - In Select mode, |:map| and |:vmap| command mappings are executed in
   Visual mode.  Use |:smap| to handle Select mode differently.
 
-							*E1135* *E1136*
-<Cmd> commands must terminate, that is, they must be followed by <CR> in the
-{rhs} of the mapping definition.  |Command-line| mode is never entered.
+							*E1255* *E1136*
+<Cmd> and <ScriptCmd> commands must terminate, that is, they must be followed
+by <CR> in the {rhs} of the mapping definition.  |Command-line| mode is never
+entered.
 
 							*E1137*
-<Cmd> commands can have only normal characters and cannot contain special
-characters like function keys.
+<Cmd> and <ScriptCmd> commands can have only normal characters and cannot
+contain special characters like function keys.
 
 
 1.3 MAPPING AND MODES					*:map-modes*
@@ -1392,7 +1411,7 @@ scripts.
 
 							*:command-verbose*
 When 'verbose' is non-zero, listing a command will also display where it was
-last defined. Example: >
+last defined and any completion argument. Example: >
 
     :verbose command TOhtml
 <	Name	    Args Range Complete  Definition ~
@@ -1511,6 +1530,8 @@ completion can be enabled:
 	-complete=custom,{func} custom completion, defined via {func}
 	-complete=customlist,{func} custom completion, defined via {func}
 
+If you specify completion while there is nothing to complete (-nargs=0, the
+default) then you get error *E1208* .
 Note: That some completion methods might expand environment variables.
 
 

runtime/doc/mbyte.txt

@@ -1,4 +1,4 @@
-*mbyte.txt*     For Vim version 8.2.  Last change: 2021 Oct 04
+*mbyte.txt*     For Vim version 8.2.  Last change: 2022 Jan 20
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar et al.
@@ -862,8 +862,8 @@ Use the RPM or port for your system.
     window specific to the input method.
 
 
-USING XIM			*multibyte-input* *E284* *E286* *E287* *E288*
-				*E285* *E289*
+USING XIM			*multibyte-input* *E284* *E285* *E286* *E287*
+					*E288* *E289*
 
 Note that Display and Input are independent.  It is possible to see your
 language even though you have no input method for it.  But when your Display
@@ -955,32 +955,11 @@ replace mode.
 The options 'iminsert', 'imsearch' and 'imcmdline' can be used to choose
 the different input methods or disable them temporarily.
 
-WHAT IS IME
-    IME is a part of East asian version Windows.  That helps you to input
-    multibyte character.  English and other language version Windows does not
-    have any IME.  (Also there is no need usually.) But there is one that
-    called Microsoft Global IME.  Global IME is a part of Internet Explorer
-    4.0 or above.  You can get more information about Global IME, at below
-    URL.
-
-WHAT IS GLOBAL IME					*global-ime*
-    Global IME makes capability to input Chinese, Japanese, and Korean text
-    into Vim buffer on any language version of Windows 98, Windows 95, and
-    Windows NT 4.0.
-    On Windows 2000 and XP it should work as well (without downloading).  On
-    Windows 2000 Professional, Global IME is built in, and the Input Locales
-    can be added through Control Panel/Regional Options/Input Locales.
-    Please see below URL for detail of Global IME.  You can also find various
-    language version of Global IME at same place.
-
-    - Global IME detailed information.
-	http://search.microsoft.com/results.aspx?q=global+ime
-
-    - Active Input Method Manager (Global IME)
+On Windows 9x and Windows NT 4.0 there was *global-ime* , but this is no
+longer supported.  You can still find documentation for Active Input Method
+Manager (Global IME) here:
 	http://msdn.microsoft.com/en-us/library/aa741221(v=VS.85).aspx
 
-    Support for Global IME is an experimental feature.
-
 NOTE: For IME to work you must make sure the input locales of your language
 are added to your system.  The exact location of this depends on the version
 of Windows you use.  For example, on my Windows 2000 box:

runtime/doc/message.txt

@@ -1,4 +1,4 @@
-*message.txt*   For Vim version 8.2.  Last change: 2021 Dec 13
+*message.txt*   For Vim version 8.2.  Last change: 2022 Jan 19
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -46,13 +46,13 @@ maintains the messages or the translations.  You can use this to contact the
 maintainer when you spot a mistake.
 
 If you want to find help on a specific (error) message, use the ID at the
-start of the message.  For example, to get help on the message: >
+start of the message.  For example, to get help on the message:
 
-	E72: Close error on swap file
+	E72: Close error on swap file ~
 
-or (translated): >
+or (translated):
 
-	E72: Errore durante chiusura swap file
+	E72: Errore durante chiusura swap file ~
 
 Use: >
 
@@ -62,6 +62,8 @@ If you are lazy, it also works without the shift key: >
 
 	:help e72
 
+The number in this ID has no meaning.
+
 ==============================================================================
 2. Error messages				*error-messages* *errors*
 
@@ -76,116 +78,117 @@ See `:messages` above.
 LIST OF MESSAGES
 			*E222* *E228* *E232* *E293* *E298* *E304* *E317*
 			*E318* *E356* *E438* *E439* *E440* *E316* *E320* *E322*
-			*E323* *E341* *E473* *E570* *E685* *E292*  >
-  Add to read buffer
-  makemap: Illegal mode
-  Cannot create BalloonEval with both message and callback
-  Hangul automata ERROR
-  block was not locked
-  Didn't get block nr {N}?
-  ml_upd_block0(): Didn't get block 0??
-  pointer block id wrong {N}
-  Updated too many blocks?
-  get_varp ERROR
-  u_undo: line numbers wrong
-  undo list corrupt
-  undo line missing
-  ml_get: cannot find line {N}
-  cannot find line {N}
-  line number out of range: {N} past the end
-  line count wrong in block {N}
-  Internal error
-  Internal error: {function}
-  fatal error in cs_manage_matches
-  Invalid count for del_bytes(): {N}
+			*E323* *E341* *E473* *E570* *E685* *E292* 
+  Add to read buffer ~
+  makemap: Illegal mode ~
+  Cannot create BalloonEval with both message and callback ~
+  Hangul automata ERROR ~
+  block was not locked ~
+  Didn't get block nr {N}? ~
+  ml_upd_block0(): Didn't get block 0?? ~
+  pointer block id wrong {N} ~
+  Updated too many blocks? ~
+  get_varp ERROR ~
+  u_undo: line numbers wrong ~
+  undo list corrupt ~
+  undo line missing ~
+  ml_get: cannot find line {N} ~
+  cannot find line {N} ~
+  line number out of range: {N} past the end ~
+  line count wrong in block {N} ~
+  Internal error ~
+  Internal error: {function} ~
+  fatal error in cs_manage_matches ~
+  Invalid count for del_bytes(): {N} ~
 
 This is an internal error.  If you can reproduce it, please send in a bug
 report. |bugs|
 
->
-  ATTENTION
-  Found a swap file by the name ...
+
+  ATTENTION ~
+  Found a swap file by the name ... ~
 
 See |ATTENTION|.
 
-							*E92*  >
-  Buffer {N} not found
+							*E92* 
+  Buffer {N} not found ~
 
 The buffer you requested does not exist.  This can also happen when you have
 wiped out a buffer which contains a mark or is referenced in another way.
 |:bwipeout|
 
-							*E95*  >
-  Buffer with this name already exists
+							*E95* 
+  Buffer with this name already exists ~
 
-You cannot have two buffers with the same name.
+You cannot have two buffers with exactly the same name.  This includes the
+path leading to the file.
 
-							*E72*  >
-  Close error on swap file
+							*E72* 
+  Close error on swap file ~
 
 The |swap-file|, that is used to keep a copy of the edited text, could not be
 closed properly.  Mostly harmless.
 
-							*E169*  >
-  Command too recursive
+							*E169* 
+  Command too recursive ~
 
 This happens when an Ex command executes an Ex command that executes an Ex
 command, etc.  The limit is 200 or the value of 'maxfuncdepth', whatever is
 larger.  When it's more there probably is an endless loop.  Probably a
 |:execute| or |:source| command is involved.
 
-							*E254*  >
-  Cannot allocate color {name}
+							*E254* 
+  Cannot allocate color {name} ~
 
 The color name {name} is unknown.  See |gui-colors| for a list of colors that
 are available on most systems.
 
-							*E1244*  >
-  Bad color string: {str}
+							*E1244* 
+  Bad color string: {str} ~
 
 The provided color did not conform to the pattern #rrggbb
 
-							*E458*  >
-  Cannot allocate colormap entry, some colors may be incorrect
+							*E458* 
+  Cannot allocate colormap entry, some colors may be incorrect ~
 
 This means that there are not enough colors available for Vim.  It will still
 run, but some of the colors will not appear in the specified color.  Try
 stopping other applications that use many colors, or start them after starting
 gvim.
 Browsers are known to consume a lot of colors.  You can avoid this with
-netscape by telling it to use its own colormap: >
-	netscape -install
-Or tell it to limit to a certain number of colors (64 should work well): >
-	netscape -ncols 64
-This can also be done with a line in your Xdefaults file: >
-	Netscape*installColormap: Yes
-or >
-	Netscape*maxImageColors:  64
-<
-							*E79*  >
-  Cannot expand wildcards
+netscape by telling it to use its own colormap:
+	netscape -install ~
+Or tell it to limit to a certain number of colors (64 should work well):
+	netscape -ncols 64 ~
+This can also be done with a line in your Xdefaults file:
+	Netscape*installColormap: Yes ~
+or
+	Netscape*maxImageColors:  64 ~
+
+							*E79* 
+  Cannot expand wildcards ~
 
 A filename contains a strange combination of characters, which causes Vim to
 attempt expanding wildcards but this fails.  This does NOT mean that no
 matching file names could be found, but that the pattern was illegal.
 
-							*E459*  >
-  Cannot go back to previous directory
+							*E459* 
+  Cannot go back to previous directory ~
 
 While expanding a file name, Vim failed to go back to the previously used
 directory.  All file names being used may be invalid now!  You need to have
 execute permission on the current directory.
 
-							*E190* *E212*  >
-  Cannot open "{filename}" for writing
-  Can't open file for writing
+							*E190* *E212* 
+  Cannot open "{filename}" for writing ~
+  Can't open file for writing ~
 
 For some reason the file you are writing to cannot be created or overwritten.
 The reason could be that you do not have permission to write in the directory
 or the file name is not valid.
 
-							*E166*  >
-  Can't open linked file for writing
+							*E166* 
+  Can't open linked file for writing ~
 
 You are trying to write to a file which can't be overwritten, and the file is
 a link (either a hard link or a symbolic link).  Writing might still be
@@ -196,20 +199,20 @@ place.  If you really want to write the file under this name, you have to
 manually delete the link or the file, or change the permissions so that Vim
 can overwrite.
 
-							*E46*  >
-  Cannot change read-only variable "{name}"
+							*E46* 
+  Cannot change read-only variable "{name}" ~
 
 You are trying to assign a value to an argument of a function |a:var| or a Vim
 internal variable |v:var| which is read-only.
 
-							*E90*  >
-  Cannot unload last buffer
+							*E90* 
+  Cannot unload last buffer ~
 
 Vim always requires one buffer to be loaded, otherwise there would be nothing
 to display in the window.
 
-							*E40*  >
-  Can't open errorfile <filename>
+							*E40* 
+  Can't open errorfile <filename> ~
 
 When using the ":make" or ":grep" commands: The file used to save the error
 messages or grep output cannot be opened.  This can have several causes:
@@ -221,8 +224,8 @@ messages or grep output cannot be opened.  This can have several causes:
 - The 'grepprg' or 'makeprg' could not be executed.  This cannot always be
   detected (especially on MS-Windows).  Check your $PATH.
 
- >
-  Can't open file C:\TEMP\VIoD243.TMP
+ 
+  Can't open file C:\TEMP\VIoD243.TMP ~
 
 On MS-Windows, this message appears when the output of an external command was
 to be read, but the command didn't run successfully.  This can be caused by
@@ -230,21 +233,21 @@ many things.  Check the 'shell', 'shellquote', 'shellxquote', 'shellslash' and
 related options.  It might also be that the external command was not found,
 there is no different error message for that.
 
-							*E12*  >
-  Command not allowed from exrc/vimrc in current dir or tag search
+							*E12* 
+  Command not allowed from exrc/vimrc in current dir or tag search ~
 
 Some commands are not allowed for security reasons.  These commands mostly
 come from a .exrc or .vimrc file in the current directory, or from a tags
 file.  Also see 'secure'.
 
-							*E74*  >
-  Command too complex
+							*E74* 
+  Command too complex ~
 
 A mapping resulted in a very long command string.  Could be caused by a
 mapping that indirectly calls itself.
 
->
-  CONVERSION ERROR
+
+  CONVERSION ERROR ~
 
 When writing a file and the text "CONVERSION ERROR" appears, this means that
 some bits were lost when converting text from the internally used UTF-8 to the
@@ -256,51 +259,51 @@ If there is a backup file, when 'writebackup' or 'backup' is set, it will not
 be deleted, so you can move it back into place if you want to discard the
 changes.
 
-							*E302*  >
-  Could not rename swap file
+							*E302* 
+  Could not rename swap file ~
 
 When the file name changes, Vim tries to rename the |swap-file| as well.
 This failed and the old swap file is now still used.  Mostly harmless.
 
-							*E43* *E44*  >
-  Damaged match string
-  Corrupted regexp program
+							*E43* *E44* 
+  Damaged match string ~
+  Corrupted regexp program ~
 
 Something inside Vim went wrong and resulted in a corrupted regexp.  If you
 know how to reproduce this problem, please report it. |bugs|
 
-							*E208* *E209* *E210*  >
-  Error writing to "{filename}"
-  Error closing "{filename}"
-  Error reading "{filename}"
+							*E208* *E209* *E210* 
+  Error writing to "{filename}" ~
+  Error closing "{filename}" ~
+  Error reading "{filename}" ~
 
 This occurs when Vim is trying to rename a file, but a simple change of file
 name doesn't work.  Then the file will be copied, but somehow this failed.
 The result may be that both the original file and the destination file exist
 and the destination file may be incomplete.
 
->
-  Vim: Error reading input, exiting...
+
+  Vim: Error reading input, exiting... ~
 
 This occurs when Vim cannot read typed characters while input is required.
 Vim got stuck, the only thing it can do is exit.  This can happen when both
 stdin and stderr are redirected and executing a script that doesn't exit Vim.
 
-							*E47*  >
-  Error while reading errorfile
+							*E47* 
+  Error while reading errorfile ~
 
 Reading the error file was not possible.  This is NOT caused by an error
 message that was not recognized.
 
-							*E80*  >
-  Error while writing
+							*E80* 
+  Error while writing ~
 
 Writing a file was not completed successfully.  The file is probably
 incomplete.
 
-							*E13* *E189*  >
-  File exists (add ! to override)
-  "{filename}" exists (add ! to override)
+							*E13* *E189* 
+  File exists (add ! to override) ~
+  "{filename}" exists (add ! to override) ~
 
 You are protected from accidentally overwriting a file.  When you want to
 write anyway, use the same command, but add a "!" just after the command.
@@ -309,8 +312,8 @@ Example: >
 changes to: >
 	:w! /tmp/test
 <
-							*E768*  >
-  Swap file exists: {filename} (:silent! overrides)
+							*E768* 
+  Swap file exists: {filename} (:silent! overrides) ~
 
 You are protected from overwriting a file that is being edited by Vim.  This
 happens when you use ":w! filename" and a swapfile is found.
@@ -322,115 +325,115 @@ happens when you use ":w! filename" and a swapfile is found.
 < The special command is needed, since you already added the ! for overwriting
   an existing file.
 
-							*E139*  >
-  File is loaded in another buffer
+							*E139* 
+  File is loaded in another buffer ~
 
 You are trying to write a file under a name which is also used in another
 buffer.  This would result in two versions of the same file.
 
-							*E142*  >
-  File not written: Writing is disabled by 'write' option
+							*E142* 
+  File not written: Writing is disabled by 'write' option ~
 
 The 'write' option is off.  This makes all commands that try to write a file
 generate this message.  This could be caused by a |-m| commandline argument.
 You can switch the 'write' option on with ":set write".
 
-							*E25*  >
-  GUI cannot be used: Not enabled at compile time
+							*E25* 
+  GUI cannot be used: Not enabled at compile time ~
 
 You are running a version of Vim that doesn't include the GUI code.  Therefore
 "gvim" and ":gui" don't work.
 
-							*E49*  >
-  Invalid scroll size
+							*E49* 
+  Invalid scroll size ~
 
 This is caused by setting an invalid value for the 'scroll', 'scrolljump' or
 'scrolloff' options.
 
-							*E17*  >
-  "{filename}" is a directory
+							*E17* 
+  "{filename}" is a directory ~
 
 You tried to write a file with the name of a directory.  This is not possible.
 You probably need to append a file name.
 
-							*E19*  >
-  Mark has invalid line number
+							*E19* 
+  Mark has invalid line number ~
 
 You are using a mark that has a line number that doesn't exist.  This can
 happen when you have a mark in another file, and some other program has
 deleted lines from it.
 
-							*E219* *E220*  >
-  Missing {.
-  Missing }.
+							*E219* *E220* 
+  Missing {. ~
+  Missing }. ~
 
 Using a {} construct in a file name, but there is a { without a matching } or
 the other way around.  It should be used like this: {foo,bar}.  This matches
 "foo" and "bar".
 
-							*E315*  >
-  ml_get: invalid lnum: {number}
+							*E315* 
+  ml_get: invalid lnum: {number} ~
 
 This is an internal Vim error.  Please try to find out how it can be
 reproduced, and submit a bug report |bugreport.vim|.
 
-							*E173*  >
-  {number} more files to edit
+							*E173* 
+  {number} more files to edit ~
 
 You are trying to exit, while the last item in the argument list has not been
 edited.  This protects you from accidentally exiting when you still have more
 files to work on.  See |argument-list|.  If you do want to exit, just do it
 again and it will work.
 
-							*E23* *E194*  >
-  No alternate file
-  No alternate file name to substitute for '#'
+							*E23* *E194* 
+  No alternate file ~
+  No alternate file name to substitute for '#' ~
 
 The alternate file is not defined yet.  See |alternate-file|.
 
-							*E32*  >
-  No file name
+							*E32* 
+  No file name ~
 
 The current buffer has no name.  To write it, use ":w fname".  Or give the
 buffer a name with ":file fname".
 
-							*E141*  >
-  No file name for buffer {number}
+							*E141* 
+  No file name for buffer {number} ~
 
 One of the buffers that was changed does not have a file name.  Therefore it
 cannot be written.  You need to give the buffer a file name: >
 	:buffer {number}
 	:file {filename}
 <
-							*E33*  >
-  No previous substitute regular expression
+							*E33* 
+  No previous substitute regular expression ~
 
 When using the '~' character in a pattern, it is replaced with the previously
 used pattern in a ":substitute" command.  This fails when no such command has
 been used yet.  See |/~|.  This also happens when using ":s/pat/%/", where the
 "%" stands for the previous substitute string.
 
-							*E35*  >
-  No previous regular expression
+							*E35* 
+  No previous regular expression ~
 
 When using an empty search pattern, the previous search pattern is used.  But
 that is not possible if there was no previous search.
 
-							*E24*  >
-  No such abbreviation
+							*E24* 
+  No such abbreviation ~
 
 You have used an ":unabbreviate" command with an argument which is not an
 existing abbreviation.  All variations of this command give the same message:
 ":cunabbrev", ":iunabbrev", etc.  Check for trailing white space.
 
->
-  /dev/dsp: No such file or directory
+
+  /dev/dsp: No such file or directory ~
 
 Only given for GTK GUI with Gnome support.  Gnome tries to use the audio
 device and it isn't present.  You can ignore this error.
 
-							*E31*  >
-  No such mapping
+							*E31*
+  No such mapping ~
 
 You have used an ":unmap" command with an argument which is not an existing
 mapping.  All variations of this command give the same message: ":cunmap",
@@ -439,9 +442,9 @@ mapping.  All variations of this command give the same message: ":cunmap",
 - If the mapping is buffer-local you need to use ":unmap <buffer>".
   |:map-<buffer>|
 
-							*E37* *E89*  >
-  No write since last change (add ! to override)
-  No write since last change for buffer {N} (add ! to override)
+							*E37* *E89* 
+  No write since last change (add ! to override) ~
+  No write since last change for buffer {N} (add ! to override) ~
 
 You are trying to |abandon| a file that has changes.  Vim protects you from
 losing your work.  You can either write the changed file with ":w", or, if you
@@ -451,8 +454,8 @@ adding a '!' character just after the command you used.  Example: >
 changes to: >
 	:e! other_file
 <
-							*E162*  >
-  No write since last change for buffer "{name}"
+							*E162* 
+  No write since last change for buffer "{name}" ~
 
 This appears when you try to exit Vim while some buffers are changed.  You
 will either have to write the changed buffer (with |:w|), or use a command to
@@ -460,23 +463,23 @@ abandon the buffer forcefully, e.g., with ":qa!".  Careful, make sure you
 don't throw away changes you really want to keep.  You might have forgotten
 about a buffer, especially when 'hidden' is set.
 
->
-  [No write since last change]
+
+  [No write since last change] ~
 
 This appears when executing a shell command while at least one buffer was
 changed.  To avoid the message reset the 'warn' option.
 
-							*E38*  >
-  Null argument
+							*E38* 
+  Null argument ~
 
 Something inside Vim went wrong and resulted in a NULL pointer.  If you know
 how to reproduce this problem, please report it. |bugs|
 
-						*E41* *E82* *E83* *E342*  >
-  Out of memory!
-  Out of memory!  (allocating {number} bytes)
-  Cannot allocate any buffer, exiting...
-  Cannot allocate buffer, using other one...
+						*E41* *E82* *E83* *E342* 
+  Out of memory! ~
+  Out of memory!  (allocating {number} bytes) ~
+  Cannot allocate any buffer, exiting... ~
+  Cannot allocate buffer, using other one... ~
 
 Oh, oh.  You must have been doing something complicated, or some other program
 is consuming your memory.  Be careful!  Vim is not completely prepared for an
@@ -494,16 +497,16 @@ in memory, you can reduce that with these options:
   helps for a change that affects all lines.
 - 'undoreload' Set to zero to disable.
 
-							*E339*  >
-  Pattern too long
+							*E339* 
+  Pattern too long ~
 
 This happens on systems with 16 bit ints: The compiled regexp pattern is
 longer than about 65000 characters.  Try using a shorter pattern.
 It also happens when the offset of a rule doesn't fit in the space available.
 Try simplifying the pattern.
 
-							*E45*  >
-  'readonly' option is set (add ! to override)
+							*E45* 
+  'readonly' option is set (add ! to override) ~
 
 You are trying to write a file that was marked as read-only.  To write the
 file anyway, either reset the 'readonly' option, or add a '!' character just
@@ -512,18 +515,18 @@ after the command you used.  Example: >
 changes to: >
 	:w!
 <
-							*E294* *E295* *E301*  >
-  Read error in swap file
-  Seek error in swap file read
-  Oops, lost the swap file!!!
+							*E294* *E295* *E301* 
+  Read error in swap file ~
+  Seek error in swap file read ~
+  Oops, lost the swap file!!! ~
 
 Vim tried to read text from the |swap-file|, but something went wrong.  The
 text in the related buffer may now be corrupted!  Check carefully before you
 write a buffer.  You may want to write it in another file and check for
 differences.
 
-							*E192*  >
-  Recursive use of :normal too deep
+							*E192* 
+  Recursive use of :normal too deep ~
 
 You are using a ":normal" command, whose argument again uses a ":normal"
 command in a recursive way.  This is restricted to 'maxmapdepth' levels.  This
@@ -531,16 +534,16 @@ example illustrates how to get this message: >
 	:map gq :normal gq<CR>
 If you type "gq", it will execute this mapping, which will call "gq" again.
 
-							*E22*  >
-  Scripts nested too deep
+							*E22* 
+  Scripts nested too deep ~
 
-Scripts can be read with the "-s" command-line argument and with the ":source"
-command.  The script can then again read another script.  This can continue
-for about 14 levels.  When more nesting is done, Vim assumes that there is a
-recursive loop somewhere and stops with this error message.
+Scripts can be read with the "-s" command-line argument and with the
+`:source!` command.  The script can then again read another script.  This can
+continue for about 14 levels.  When more nesting is done, Vim assumes that
+there is a recursive loop and stops with this error message.
 
-							*E319*  >
-  Sorry, the command is not available in this version
+							*E319* 
+  Sorry, the command is not available in this version ~
 
 You have used a command that is not present in the version of Vim you are
 using.  When compiling Vim, many different features can be enabled or
@@ -548,8 +551,8 @@ disabled.  This depends on how big Vim has chosen to be and the operating
 system.  See |+feature-list| for when which feature is available.  The
 |:version| command shows which feature Vim was compiled with.
 
-							*E300*  >
-  Swap file already exists (symlink attack?)
+							*E300* 
+  Swap file already exists (symlink attack?) ~
 
 This message appears when Vim is trying to open a swap file and finds it
 already exists or finds a symbolic link in its place.  This shouldn't happen,
@@ -558,8 +561,8 @@ opened the same file at exactly the same moment (very unlikely) or someone is
 attempting a symlink attack (could happen when editing a file in /tmp or when
 'directory' starts with "/tmp", which is a bad choice).
 
-							*E432*  >
-  Tags file not sorted: {file name}
+							*E432* 
+  Tags file not sorted: {file name} ~
 
 Vim (and Vi) expect tags files to be sorted in ASCII order.  Binary searching
 can then be used, which is a lot faster than a linear search.  If your tags
@@ -568,21 +571,21 @@ This message is only given when Vim detects a problem when searching for a
 tag.  Sometimes this message is not given, even though the tags file is not
 properly sorted.
 
-							*E424*  >
-  Too many different highlighting attributes in use
+							*E424* 
+  Too many different highlighting attributes in use ~
 
 Vim can only handle about 223 different kinds of highlighting.  If you run
 into this limit, you have used too many |:highlight| commands with different
 arguments.  A ":highlight link" is not counted.
 
-							*E77*  >
-  Too many file names
+							*E77* 
+  Too many file names ~
 
 When expanding file names, more than one match was found.  Only one match is
 allowed for the command that was used.
 
-							*E303*  >
-  Unable to open swap file for "{filename}", recovery impossible
+							*E303* 
+  Unable to open swap file for "{filename}", recovery impossible ~
 
 Vim was not able to create a swap file.  You can still edit the file, but if
 Vim unexpectedly exits the changes will be lost.  And Vim may consume a lot of
@@ -590,25 +593,25 @@ memory when editing a big file.  You may want to change the 'directory' option
 to avoid this error.  This error is not given when 'directory' is empty.  See
 |swap-file|.
 
-							*E140*  >
-  Use ! to write partial buffer
+							*E140* 
+  Use ! to write partial buffer ~
 
 When using a range to write part of a buffer, it is unusual to overwrite the
 original file.  It is probably a mistake (e.g., when Visual mode was active
 when using ":w"), therefore Vim requires using a !  after the command, e.g.:
 ":3,10w!".
->
 
-  Warning: Cannot convert string "<Key>Escape,_Key_Cancel" to type
-  VirtualBinding
+
+  Warning: Cannot convert string "<Key>Escape,_Key_Cancel" to type ~
+  VirtualBinding ~
 
 Messages like this appear when starting up.  This is not a Vim problem, your
 X11 configuration is wrong.  You can find a hint on how to solve this here:
 http://groups.yahoo.com/group/solarisonintel/message/12179.
 [this URL is no longer valid]
 
-							*W10*  >
-  Warning: Changing a readonly file
+							*W10* 
+  Warning: Changing a readonly file ~
 
 The file is read-only and you are making a change to it anyway.  You can use
 the |FileChangedRO| autocommand event to avoid this message (the autocommand
@@ -616,15 +619,15 @@ must reset the 'readonly' option).  See 'modifiable' to completely disallow
 making changes to a file.
 This message is only given for the first change after 'readonly' has been set.
 
-							*W13*  >
-  Warning: File "{filename}" has been created after editing started
+							*W13* 
+  Warning: File "{filename}" has been created after editing started ~
 
 You are editing a file in Vim when it didn't exist, but it does exist now.
 You will have to decide if you want to keep the version in Vim or the newly
 created file.  This message is not given when 'buftype' is not empty.
 
-							*W11*  >
-  Warning: File "{filename}" has changed since editing started
+							*W11* 
+  Warning: File "{filename}" has changed since editing started ~
 
 The file which you have started editing has got another timestamp and the
 contents changed (more precisely: When reading the file again with the current
@@ -647,15 +650,15 @@ starts.  It can be fixed in one of these ways:
 If you get W11 all the time, you may need to disable "Acronis Active
 Protection" or register Vim as a trusted service/application.
 
-							*W12*  >
-  Warning: File "{filename}" has changed and the buffer was changed in Vim as well
+							*W12* 
+  Warning: File "{filename}" has changed and the buffer was changed in Vim as well ~
 
 Like the above, and the buffer for the file was changed in this Vim as well.
 You will have to decide if you want to keep the version in this Vim or the one
 on disk.  This message is not given when 'buftype' is not empty.
 
-							*W16*  >
-  Warning: Mode of file "{filename}" has changed since editing started
+							*W16* 
+  Warning: Mode of file "{filename}" has changed since editing started ~
 
 When the timestamp for a buffer was changed and the contents are still the
 same but the mode (permissions) have changed.  This usually occurs when
@@ -663,37 +666,37 @@ checking out a file from a version control system, which causes the read-only
 bit to be reset.  It should be safe to reload the file.  Set 'autoread' to
 automatically reload the file.
 
-							*E211*  >
-  File "{filename}" no longer available
+							*E211* 
+  File "{filename}" no longer available ~
 
 The file which you have started editing has disappeared, or is no longer
 accessible.  Make sure you write the buffer somewhere to avoid losing
 changes.  This message is not given when 'buftype' is not empty.
 
-							*W14*  >
-  Warning: List of file names overflow
+							*W14* 
+  Warning: List of file names overflow ~
 
 You must be using an awful lot of buffers.  It's now possible that two buffers
 have the same number, which causes various problems.  You might want to exit
 Vim and restart it.
 
-							*E931*  >
-  Buffer cannot be registered
+							*E931* 
+  Buffer cannot be registered ~
 
 Out of memory or a duplicate buffer number.  May happen after W14.  Looking up
 a buffer will not always work, better restart Vim.
 
-							*E296* *E297*  >
-  Seek error in swap file write
-  Write error in swap file
+							*E296* *E297* 
+  Seek error in swap file write ~
+  Write error in swap file ~
 
 This mostly happens when the disk is full.  Vim could not write text into the
 |swap-file|.  It's not directly harmful, but when Vim unexpectedly exits some
 text may be lost without recovery being possible.  Vim might run out of memory
 when this problem persists.
 
-						*connection-refused*  >
-  Xlib: connection to "<machine-name:0.0" refused by server
+						*connection-refused* 
+  Xlib: connection to "<machine-name:0.0" refused by server ~
 
 This happens when Vim tries to connect to the X server, but the X server does
 not allow a connection.  The connection to the X server is needed to be able
@@ -701,54 +704,55 @@ to restore the title and for the xterm clipboard support.  Unfortunately this
 error message cannot be avoided, except by disabling the |+xterm_clipboard|
 and |+X11| features.
 
-							*E10*  >
-  \\ should be followed by /, ? or &
+							*E10* 
+  \\ should be followed by /, ? or & ~
 
 A command line started with a backslash or the range of a command contained a
 backslash in a wrong place.  This is often caused by command-line continuation
 being disabled.  Remove the 'C' flag from the 'cpoptions' option to enable it.
 Or use ":set nocp".
 
-							*E471*  >
-  Argument required
+							*E471* 
+  Argument required ~
 
 This happens when an Ex command with mandatory argument(s) was executed, but
 no argument has been specified.
 
-							*E474* *E475* *E983*  >
-  Invalid argument
-  Invalid argument: {arg}
-  Duplicate argument: {arg}
+							*E474* *E475* *E983* 
+  Invalid argument ~
+  Invalid argument: {arg} ~
+  Duplicate argument: {arg} ~
 
 An Ex command or function has been executed, but an invalid argument has been
 specified.
 
-							*E488*  >
-  Trailing characters
+							*E488* 
+  Trailing characters ~
 
 An argument has been added to an Ex command that does not permit one.
+Or the argument has invalid characters and has not been recognized.
 
-							*E477* *E478*  >
-  No ! allowed
-  Don't panic!
+							*E477* *E478* 
+  No ! allowed ~
+  Don't panic! ~
 
 You have added a "!" after an Ex command that doesn't permit one.
 
-							*E481*  >
-  No range allowed
+							*E481* 
+  No range allowed ~
 
 A range was specified for an Ex command that doesn't permit one.  See
 |cmdline-ranges|.
 
-							*E482* *E483*  >
-  Can't create file {filename}
-  Can't get temp file name
+							*E482* *E483* 
+  Can't create file {filename} ~
+  Can't get temp file name ~
 
 Vim cannot create a temporary file.
 
-							*E484* *E485*  >
-  Can't open file {filename}
-  Can't read file {filename}
+							*E484* *E485* 
+  Can't open file {filename} ~
+  Can't read file {filename} ~
 
 Vim cannot read a temporary file.  Especially on Windows, this can be caused
 by wrong escaping of special characters for cmd.exe; the approach was
@@ -756,8 +760,8 @@ changed with patch 7.3.443.  Try using |shellescape()| for all shell arguments
 given to |system()|, or explicitly add escaping with ^.  Also see
 'shellxquote' and 'shellxescape'.
 
-							*E464*  >
-  Ambiguous use of user-defined command
+							*E464* 
+  Ambiguous use of user-defined command ~
 
 There are two user-defined commands with a common name prefix, and you used
 Command-line completion to execute one of them. |user-cmd-ambiguous|
@@ -766,23 +770,22 @@ Example: >
 	:command MyCommand2 echo "two"
 	:MyCommand
 <
-							*E492*  >
-  Not an editor command
+							*E492* 
+  Not an editor command ~
 
 You tried to execute a command that is neither an Ex command nor
 a user-defined command.
 
-							*E943*  >
-  Command table needs to be updated, run 'make cmdidxs'
+							*E943* 
+  Command table needs to be updated, run 'make cmdidxs' ~
 
 This can only happen when changing the source code, when adding a command in
 src/ex_cmds.h.  The lookup table then needs to be updated, by running: >
 	make cmdidxs
 <
-						*E928* *E889* *E839*  >
-  E928: String required
-  E889: Number required
-  E839: Bool required
+						*E928* *E889* 
+  E928: String required ~
+  E889: Number required ~
 
 These happen when a value or expression is used that does not have the
 expected type.
@@ -839,9 +842,9 @@ Also see 'mouse'.  The hit-enter message is highlighted with the |hl-Question|
 group.
 
 
-						*more-prompt* *pager*  >
-  -- More --
-  -- More -- SPACE/d/j: screen/page/line down, b/u/k: up, q: quit
+						*more-prompt* *pager* 
+  -- More -- ~
+  -- More -- SPACE/d/j: screen/page/line down, b/u/k: up, q: quit ~
 
 This message is given when the screen is filled with messages.  It is only
 given when the 'more' option is on.  It is highlighted with the |hl-MoreMsg|

runtime/doc/motion.txt

@@ -1,4 +1,4 @@
-*motion.txt*    For Vim version 8.2.  Last change: 2021 Dec 13
+*motion.txt*    For Vim version 8.2.  Last change: 2021 Dec 27
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -788,6 +788,9 @@ m<  or  m>		Set the |'<| or |'>| mark.  Useful to change what the
 						*:k*
 :[range]k{a-zA-Z'}	Same as :mark, but the space before the mark name can
 			be omitted.
+			This command is not supported in |Vim9| script,
+			because it is too easily confused with a variable
+			name.
 
 						*'* *'a* *`* *`a*
 '{a-z}  `{a-z}		Jump to the mark {a-z} in the current buffer.

runtime/doc/options.txt

@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 8.2.  Last change: 2021 Dec 21
+*options.txt*	For Vim version 8.2.  Last change: 2022 Jan 22
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -170,7 +170,7 @@ When a key code is not set, it's like it does not exist.  Trying to get its
 value will result in an error: >
 	:set t_kb=
 	:set t_kb
-	E846: Key code not set: t_kb
+<	E846: Key code not set: t_kb ~
 
 The t_xx options cannot be set from a |modeline| or in the |sandbox|, for
 security reasons.
@@ -369,7 +369,7 @@ value to the local value, it doesn't switch back to using the global value
 This will make the local value of 'path' empty, so that the global value is
 used.  Thus it does the same as: >
 	:setlocal path=
-Note: In the future more global options can be made global-local.  Using
+Note: In the future more global options can be made |global-local|.  Using
 ":setlocal" on a global option might work differently then.
 
 
@@ -877,11 +877,11 @@ A jump table for the options with a short description can be found at |Q_op|.
 			global
 	Write the contents of the file, if it has been modified, on each
 	`:next`, `:rewind`, `:last`, `:first`, `:previous`, `:stop`,
-	`:suspend`, `:tag, `:!`, ``:make`, CTRL-] and CTRL-^ command; and when
-	a :buffer, CTRL-O, CTRL-I, '{A-Z0-9}, or `{A-Z0-9} command takes one
+	`:suspend`, `:tag`, `:!`, `:make`, CTRL-] and CTRL-^ command; and when
+	a `:buffer`, CTRL-O, CTRL-I, '{A-Z0-9}, or `{A-Z0-9} command takes one
 	to another file.
 	A buffer is not written if it becomes hidden, e.g. when 'bufhidden' is
-	set to "hide" and `:next` is used
+	set to "hide" and `:next` is used.
 	Note that for some commands the 'autowrite' option is not used, see
 	'autowriteall' for that.
 	Some buffers will not be written, specifically when 'buftype' is
@@ -1225,6 +1225,13 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Vim does not try to send a message to an external debugger (Netbeans
 	or Sun Workshop).
 
+	If the expression starts with s: or |<SID>|, then it is replaced with
+	the script ID (|local-function|). Example: >
+		set bexpr=s:MyBalloonExpr()
+		set bexpr=<SID>SomeBalloonExpr()
+<	Otherwise, the expression is evaluated in the context of the script
+	where the option was set, thus script-local items are available.
+
 	The expression will be evaluated in the |sandbox| when set from a
 	modeline, see |sandbox-option|.
 	This option cannot be set in a modeline when 'modelineexpr' is off.
@@ -1365,6 +1372,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 			    text should normally be narrower. This prevents
 			    text indented almost to the right window border
 			    occupying lot of vertical space when broken.
+			    (default: 20)
 		shift:{n}   After applying 'breakindent', the wrapped line's
 			    beginning will be shifted by the given number of
 			    characters.  It permits dynamic French paragraph
@@ -2128,8 +2136,18 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Commas can be added for readability.
 	To avoid problems with flags that are added in the future, use the
 	"+=" and "-=" feature of ":set" |add-option-flags|.
+
 	NOTE: This option is set to the Vi default value when 'compatible' is
 	set and to the Vim default value when 'compatible' is reset.
+
+	NOTE: In a |Vim9| script, when `vim9script` is encountered, the value
+	is saved, 'cpoptions' is set to the Vim default, and the saved value
+	is restored at the end of the script.  Changes to the value of
+	'cpoptions' will be applied to the saved value, but keep in mind that
+	removing a flag that is not present when 'cpoptions' is changed has no
+	effect.  In the |.vimrc| file the value is not restored, thus using
+	`vim9script` in the |.vimrc| file results in using the Vim default.
+
 	NOTE: This option is set to the POSIX default value at startup when
 	the Vi default value would be used and the $VIM_POSIX environment
 	variable exists |posix|.  This means Vim tries to behave like the
@@ -3423,7 +3441,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 			{not available when compiled without the |+folding|
 			or |+eval| features}
 	The expression used for when 'foldmethod' is "expr".  It is evaluated
-	for each line to obtain its fold level.  See |fold-expr|.
+	for each line to obtain its fold level.  The context is set to the
+	script where 'foldexpr' was set, script-local items can be accessed.
+	See |fold-expr| for the usage.
 
 	The expression will be evaluated in the |sandbox| if set from a
 	modeline, see |sandbox-option|.
@@ -3557,7 +3577,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 			{not available when compiled without the |+folding|
 			feature}
 	An expression which is used to specify the text displayed for a closed
-	fold.  See |fold-foldtext|.
+	fold.  The context is set to the script where 'foldexpr' was set,
+	script-local items can be accessed.  See |fold-foldtext| for the
+	usage.
 
 	The expression will be evaluated in the |sandbox| if set from a
 	modeline, see |sandbox-option|.
@@ -3596,6 +3618,13 @@ A jump table for the options with a short description can be found at |Q_op|.
 	When the expression evaluates to non-zero Vim will fall back to using
 	the internal format mechanism.
 
+	If the expression starts with s: or |<SID>|, then it is replaced with
+	the script ID (|local-function|). Example: >
+		set formatexpr=s:MyFormatExpr()
+		set formatexpr=<SID>SomeFormatExpr()
+<	Otherwise, the expression is evaluated in the context of the script
+	where the option was set, thus script-local items are available.
+
 	The expression will be evaluated in the |sandbox| when set from a
 	modeline, see |sandbox-option|.  That stops the option from working,
 	since changing the buffer text is not allowed.
@@ -4438,6 +4467,13 @@ A jump table for the options with a short description can be found at |Q_op|.
 	found.  Allows doing "gf" on the name after an 'include' statement.
 	Also used for |<cfile>|.
 
+	If the expression starts with s: or |<SID>|, then it is replaced with
+	the script ID (|local-function|). Example: >
+		set includeexpr=s:MyIncludeExpr(v:fname)
+		set includeexpr=<SID>SomeIncludeExpr(v:fname)
+<	Otherwise, the expression is evaluated in the context of the script
+	where the option was set, thus script-local items are available.
+
 	The expression will be evaluated in the |sandbox| when set from a
 	modeline, see |sandbox-option|.
 	This option cannot be set in a modeline when 'modelineexpr' is off.
@@ -4511,6 +4547,14 @@ A jump table for the options with a short description can be found at |Q_op|.
 	The expression is evaluated with |v:lnum| set to the line number for
 	which the indent is to be computed.  The cursor is also in this line
 	when the expression is evaluated (but it may be moved around).
+
+	If the expression starts with s: or |<SID>|, then it is replaced with
+	the script ID (|local-function|). Example: >
+		set indentexpr=s:MyIndentExpr()
+		set indentexpr=<SID>SomeIndentExpr()
+<	Otherwise, the expression is evaluated in the context of the script
+	where the option was set, thus script-local items are available.
+
 	The expression must return the number of spaces worth of indent.  It
 	can return "-1" to keep the current indent (this means 'autoindent' is
 	used for the indent).
@@ -5654,7 +5698,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 			    *'opendevice'* *'odev'* *'noopendevice'* *'noodev'*
 'opendevice' 'odev'	boolean	(default off)
 			global
-			{only for MS-Windows}
+			{only for MS-Windows}  *E796*
 	Enable reading and writing from devices.  This may get Vim stuck on a
 	device that can be opened but doesn't actually do the I/O.  Therefore
 	it is off by default.
@@ -6654,6 +6698,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Don't include both "curdir" and "sesdir".
 	When neither "curdir" nor "sesdir" is included, file names are stored
 	with absolute paths.
+	If you leave out "options" many things won't work well after restoring
+	the session.
 	"slash" and "unix" are useful on Windows when sharing session files
 	with Unix.  The Unix version of Vim cannot source dos format scripts,
 	but the Windows version of Vim can source unix format scripts.
@@ -8096,7 +8142,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	another default.  Backticks cannot be used in this option for security
 	reasons.
 
-						*'thesaurusfunc'* *tsrfu'*
+						*'thesaurusfunc'* *'tsrfu'*
 'thesaurusfunc' 'tsrfu'	string	(default: empty)
 			global or local to buffer |global-local|
 			{not available when compiled without the |+eval|

runtime/doc/os_dos.txt

@@ -342,12 +342,12 @@ PowerShell Execution Policy settings.
 See |option-backslash| about including spaces in 'shellcmdflag' when using
 multiple flags.
 
-The 'shellpipe' and 'shellredir' option values re-encode the UTF-16le output
+The 'shellpipe' and 'shellredir' option values re-encode the UTF-16LE output
 from PowerShell Desktop to your currently configured console codepage.  The
 output can be forced into a different encoding by changing "default" to one of
 the following:
 
-	unicode		 - UTF-16le (default output from PowerShell 5.1)
+	unicode		 - UTF-16LE (default output from PowerShell 5.1)
 	bigendianunicode - UTF-16
 	utf8		 - UTF-8
 	utf7		 - UTF-7 (no BOM)
@@ -356,7 +356,7 @@ the following:
 	default		 - System's active code page (typically ANSI)
 	oem		 - System's current OEM code page
 
-Note The abovce multi-byte Unicode encodings include a leading BOM unless
+Note The above multi-byte Unicode encodings include a leading BOM unless
 otherwise indicated.
 
 By default PowerShell Core's output is UTF-8 encoded without a BOM.  If you
@@ -365,10 +365,10 @@ want to force the output of PowerShell Core into a different encoding then set
 encoding is one of the following:
 
 	ascii		 - 7-bit ASCII character set
-	bigendianunicode - UTF-16be
-	bigendianutf32	 - UTF-32be
+	bigendianunicode - UTF-16BE
+	bigendianutf32	 - UTF-32BE
 	oem		 - System's current OEM code page
-	unicode		 - UTF-16le
+	unicode		 - UTF-16LE
 	utf7		 - UTF-7
 	utf8		 - UTF-8
 	utf8BOM		 - UTF-8, with BOM

runtime/doc/pattern.txt

@@ -1,4 +1,4 @@
-*pattern.txt*   For Vim version 8.2.  Last change: 2021 Jul 16
+*pattern.txt*   For Vim version 8.2.  Last change: 2022 Jan 08
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -315,7 +315,7 @@ the pattern.
 ==============================================================================
 2. The definition of a pattern		*search-pattern* *pattern* *[pattern]*
 					*regular-expression* *regexp* *Pattern*
-					*E76* *E383* *E476*
+					*E383* *E476*
 
 For starters, read chapter 27 of the user manual |usr_27.txt|.
 
@@ -929,9 +929,9 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 \%23l	Matches in a specific line.
 \%<23l	Matches above a specific line (lower line number).
 \%>23l	Matches below a specific line (higher line number).
-\%.l    Matches at the cursor line.
-\%<.l   Matches above the cursor line.
-\%>.l   Matches below the cursor line.
+\%.l	Matches at the cursor line.
+\%<.l	Matches above the cursor line.
+\%>.l	Matches below the cursor line.
 	These six can be used to match specific lines in a buffer.  The "23"
 	can be any line number.  The first line is 1.
 	WARNING: When inserting or deleting lines Vim does not automatically
@@ -950,9 +950,9 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 \%23c	Matches in a specific column.
 \%<23c	Matches before a specific column.
 \%>23c	Matches after a specific column.
-\%.c    Matches at the cursor column.
-\%<.c   Matches before the cursor column.
-\%>.c   Matches after the cursor column.
+\%.c	Matches at the cursor column.
+\%<.c	Matches before the cursor column.
+\%>.c	Matches after the cursor column.
 	These six can be used to match specific columns in a buffer or string.
 	The "23" can be any column number.  The first column is 1.  Actually,
 	the column is the byte number (thus it's not exactly right for
@@ -976,9 +976,9 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 \%23v	Matches in a specific virtual column.
 \%<23v	Matches before a specific virtual column.
 \%>23v	Matches after a specific virtual column.
-\%.v    Matches at the current virtual column.
-\%<.v   Matches before the current virtual column.
-\%>.v   Matches after the current virtual column.
+\%.v	Matches at the current virtual column.
+\%<.v	Matches before the current virtual column.
+\%>.v	Matches after the current virtual column.
 	These six can be used to match specific virtual columns in a buffer or
 	string.  When not matching with a buffer in a window, the option
 	values of the current window are used (e.g., 'tabstop').
@@ -1070,6 +1070,8 @@ match ASCII characters, as indicated by the range.
 
 \(\)	A pattern enclosed by escaped parentheses.	*/\(* */\(\)* */\)*
 	E.g., "\(^a\)" matches 'a' at the start of a line.
+	There can only be ten of these.  You can use "\%(" to add more, but
+	not counting it as a sub-expression.
 	*E51* *E54* *E55* *E872* *E873*
 
 \1      Matches the same string that was matched by	*/\1* *E65*
@@ -1092,7 +1094,7 @@ x	A single character, with no special meaning, matches itself
 \x	A backslash followed by a single character, with no special meaning,
 	is reserved for future expansions
 
-[]	(with 'nomagic': \[])		*/[]* */\[]* */\_[]* */collection*
+[]	(with 'nomagic': \[])		*/[]* */\[]* */\_[]* */collection* *E76*
 \_[]
 	A collection.  This is a sequence of characters enclosed in square
 	brackets.  It matches any single character in the collection.
@@ -1488,5 +1490,4 @@ the matching positions and the fuzzy match scores.
 The "f" flag of `:vimgrep` enables fuzzy matching.
 
 
-
  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/popup.txt

@@ -1,4 +1,4 @@
-*popup.txt*  For Vim version 8.2.  Last change: 2021 Nov 29
+*popup.txt*  For Vim version 8.2.  Last change: 2022 Jan 08
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -54,7 +54,7 @@ A popup window has a window-ID like other windows, but behaves differently.
 The size can be up to the whole Vim window and it overlaps other windows.
 Popup windows can also overlap each other.  The "zindex" property specifies
 what goes on top of what.
-
+							*E366*
 The popup window contains a buffer, and that buffer is always associated with
 the popup window.  The window cannot be in Normal, Visual or Insert mode, it
 does not get keyboard focus.  You can use functions like `setbufline()` to
@@ -262,7 +262,7 @@ popup_close({id} [, {result}])				*popup_close()*
 
 
 popup_create({what}, {options})				*popup_create()*
-		Open a popup window showing {what}, which is either:
+		Open a popup window showing {what}, which is either: *E450*
 		- a buffer number
 		- a string
 		- a list of strings

runtime/doc/print.txt

@@ -174,6 +174,11 @@ an error message.  In that case Vim will delete the file.  In the default
 value for non-MS-Windows a trick is used: Adding "v:shell_error" will result
 in a non-zero number when the system() call fails.
 
+If the expression starts with s: or |<SID>|, then it is replaced with the
+script ID (|local-function|). Example: >
+		set printexpr=s:MyPrintFile()
+		set printexpr=<SID>SomePrintFile()
+<
 This option cannot be set from a |modeline| or in the |sandbox|, for security
 reasons.
 

runtime/doc/quickfix.txt

@@ -1,4 +1,4 @@
-*quickfix.txt*  For Vim version 8.2.  Last change: 2021 Dec 03
+*quickfix.txt*  For Vim version 8.2.  Last change: 2022 Jan 04
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -244,7 +244,7 @@ processing a quickfix or location list command, it will be aborted.
 			[!] is not used.  It works like ":qall!" |:qall|,
 			except that Vim returns a non-zero exit code.
 
-							*:cf* *:cfile*
+							*:cf* *:cfi* *:cfile*
 :cf[ile][!] [errorfile]	Read the error file and jump to the first error.
 			This is done automatically when Vim is started with
 			the -q option.  You can use this command when you

runtime/doc/remote.txt

@@ -1,4 +1,4 @@
-*remote.txt*    For Vim version 8.2.  Last change: 2019 May 05
+*remote.txt*    For Vim version 8.2.  Last change: 2021 Dec 27
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -143,7 +143,7 @@ You can not put options there!
 FUNCTIONS
 								*E240* *E573*
 There are a number of Vim functions for scripting the command server.  See
-the description in |eval.txt| or use CTRL-] on the function name to jump to
+the description in |builtin.txt| or use CTRL-] on the function name to jump to
 the full explanation.
 
     synopsis				     explanation ~

runtime/doc/repeat.txt

@@ -1,4 +1,4 @@
-*repeat.txt*    For Vim version 8.2.  Last change: 2021 Nov 24
+*repeat.txt*    For Vim version 8.2.  Last change: 2022 Jan 21
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -354,7 +354,7 @@ For writing a Vim script, see chapter 41 of the user manual |usr_41.txt|.
 <
 
 :scriptv[ersion] {version}		*:scriptv* *:scriptversion*
-								*E999* *E984*
+							*E999* *E984* *E1040*
 			Specify the version of Vim for the lines that follow
 			in the same file.  Only applies at the toplevel of
 			sourced scripts, not inside functions.
@@ -367,8 +367,8 @@ For writing a Vim script, see chapter 41 of the user manual |usr_41.txt|.
 
 :vim9s[cript] [noclear]				*:vim9s* *:vim9script*
 			Marks a script file as containing |Vim9-script|
-			commands.  Also see |vim9-namespace|.
-			Must be the first command in the file.
+			commands.  Also see |vim9-namespace|. *E1038*
+			Must be the first command in the file. *E1039*
 			For [noclear] see |vim9-reload|.
 			Without the |+eval| feature this changes the syntax
 			for some commands.
@@ -377,8 +377,11 @@ For writing a Vim script, see chapter 41 of the user manual |usr_41.txt|.
 
 						*:scr* *:scriptnames*
 :scr[iptnames]		List all sourced script names, in the order they were
-			first sourced.  The number is used for the script ID
-			|<SID>|.
+			first encountered.  The number is used for the script
+			ID |<SID>|.
+			For a script that was used with `import autoload` but
+			was not actually sourced yet an "A" is shown after the
+			script ID.
 			{not available when compiled without the |+eval|
 			feature}
 
@@ -495,6 +498,9 @@ space at the end of a line is hard to see and may be accidentally deleted. >
 		\ "very long regexp"
 		\ keepend
 
+In |Vim9| script the backslash can often be omitted, but not always.
+See |vim9-line-continuation|.
+
 There is a problem with the ":append" and ":insert" commands: >
    :1append
    \asdf

runtime/doc/starting.txt

@@ -1,4 +1,4 @@
-*starting.txt*  For Vim version 8.2.  Last change: 2021 May 08
+*starting.txt*  For Vim version 8.2.  Last change: 2022 Jan 20
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -268,8 +268,8 @@ a slash.  Thus "-R" means recovery and "-/R" readonly.
 		started if possible.
 
 							*-e*
--e		Start Vim in Ex mode |Q|.  Only makes a difference when the
-		executable is not called "ex".
+-e		Start Vim in Ex mode, see |Ex-mode|.  Only makes a difference
+		when the executable is not called "ex".
 
 							*-E*
 -E		Start Vim in improved Ex mode |gQ|.  Only makes a difference
@@ -560,6 +560,8 @@ a slash.  Thus "-R" means recovery and "-/R" readonly.
 		":source!".  When the "scriptout" file already exists, new
 		characters are appended.  See also |complex-repeat|.
 		{scriptout} cannot start with a digit.
+		If you want to record what is typed in a human readable for
+		you can use |ch_logfile()|, It adds "raw key input" lines.
 
 							*-W*
 -W {scriptout}	Like -w, but do not append, overwrite an existing file.

runtime/doc/syntax.txt

@@ -956,12 +956,16 @@ the options 'foldminlines' and 'foldnestmax' in |.vimrc| or use |:setlocal| in
 
 BASIC			*basic.vim* *vb.vim* *ft-basic-syntax* *ft-vb-syntax*
 
-Both Visual Basic and "normal" basic use the extension ".bas".	To detect
+Both Visual Basic and "normal" BASIC use the extension ".bas".	To detect
 which one should be used, Vim checks for the string "VB_Name" in the first
 five lines of the file.  If it is not found, filetype will be "basic",
 otherwise "vb".  Files with the ".frm" extension will always be seen as Visual
 Basic.
 
+If the automatic detection doesn't work for you or you only edit, for
+example, FreeBASIC files, use this in your startup vimrc: >
+   :let filetype_bas = "freebasic"
+
 
 C							*c.vim* *ft-c-syntax*
 
@@ -1442,7 +1446,7 @@ add the following line to your startup file: >
 
 	:let g:filetype_euphoria = "euphoria4"
 
-Elixir and Euphoria share the *.ex file extension.  If the filetype is 
+Elixir and Euphoria share the *.ex file extension.  If the filetype is
 specifically set as Euphoria with the g:filetype_euphoria variable, or the
 file is determined to be Euphoria based on keywords in the file, then the
 filetype will be set as Euphoria. Otherwise, the filetype will default to
@@ -1473,7 +1477,7 @@ The following file extensions are auto-detected as Elixir file types:
 
 	*.ex, *.exs, *.eex, *.leex, *.lock
 
-Elixir and Euphoria share the *.ex file extension. If the filetype is 
+Elixir and Euphoria share the *.ex file extension. If the filetype is
 specifically set as Euphoria with the g:filetype_euphoria variable, or the
 file is determined to be Euphoria based on keywords in the file, then the
 filetype will be set as Euphoria. Otherwise, the filetype will default to

runtime/doc/terminal.txt

@@ -1,4 +1,4 @@
-*terminal.txt*	For Vim version 8.2.  Last change: 2021 Dec 21
+*terminal.txt*	For Vim version 8.2.  Last change: 2022 Jan 21
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -39,6 +39,7 @@ If the result is "1" you have it.
       Stepping through code			|termdebug-stepping|
       Inspecting variables			|termdebug-variables|
       Other commands				|termdebug-commands|
+      Events					|termdebug-events|
       Prompt mode				|termdebug-prompt|
       Communication				|termdebug-communication|
       Customizing				|termdebug-customizing|
@@ -1177,7 +1178,7 @@ gdb window	A terminal window in which "gdb vim" is executed.  Here you
 program window	A terminal window for the executed program.  When "run" is
 		used in gdb the program I/O will happen in this window, so
 		that it does not interfere with controlling gdb.  The buffer
-		name is "gdb program".
+		name is "debugged program".
 
 The current window is used to show the source code.  When gdb pauses the
 source file location will be displayed, if possible.  A sign is used to

runtime/doc/testing.txt

@@ -1,4 +1,4 @@
-*testing.txt*	For Vim version 8.2.  Last change: 2021 Dec 11
+*testing.txt*	For Vim version 8.2.  Last change: 2022 Jan 20
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -121,6 +121,24 @@ test_gui_mouse_event({button}, {row}, {col}, {multiclick}, {modifiers})
 		|feedkeys()| to have them processed, e.g.: >
 			call feedkeys("y", 'Lx!')
 
+						*test_gui_tabline_event()*
+test_gui_tabline_event({tabnr})
+		Add an event that simulates a click on the tabline to select
+		tabpage {tabnr} to the input buffer.
+		Returns TRUE if the event is successfully added, FALSE if
+		already in the tabpage {tabnr} or the cmdline window is open.
+		After injecting the event you probably should call
+		|feedkeys()| to have them processed, e.g.: >
+			call feedkeys("y", 'Lx!')
+
+						*test_gui_tabmenu_event()*
+test_gui_tabmenu_event({tabnr}, {event})
+		Add an event that simulates selecting a tabline menu entry for
+		tabpage {tabnr} to the input buffer. {event} is 1 for the
+		first menu entry, 2 for the second entry and so on.
+		After injecting the event you probably should call
+		|feedkeys()| to have them processed, e.g.: >
+			call feedkeys("y", 'Lx!')
 
 test_ignore_error({expr})			 *test_ignore_error()*
 		Ignore any error containing {expr}.  A normal message is given
@@ -188,24 +206,28 @@ test_override({name}, {val})				*test_override()*
 		to run tests. Only to be used for testing Vim!
 		The override is enabled when {val} is non-zero and removed
 		when {val} is zero.
-		Current supported values for name are:
+		Current supported values for {name} are:
 
-		name	     effect when {val} is non-zero ~
-		redraw       disable the redrawing() function
-		redraw_flag  ignore the RedrawingDisabled flag
+		{name}	     effect when {val} is non-zero ~
+		autoload     `import autoload` will load the script right
+			     away, not postponed until an item is used
 		char_avail   disable the char_avail() function
-		starting     reset the "starting" variable, see below
 		nfa_fail     makes the NFA regexp engine fail to force a
 			     fallback to the old engine
 		no_query_mouse  do not query the mouse position for "dec"
 				terminals
 		no_wait_return	set the "no_wait_return" flag.  Not restored
 				with "ALL".
-		ui_delay     time in msec to use in ui_delay(); overrules a
-			     wait time of up to 3 seconds for messages
+		redraw       disable the redrawing() function
+		redraw_flag  ignore the RedrawingDisabled flag
+		starting     reset the "starting" variable, see below
 		term_props   reset all terminal properties when the version
 			     string is detected
+		ui_delay     time in msec to use in ui_delay(); overrules a
+			     wait time of up to 3 seconds for messages
 		uptime 	     overrules sysinfo.uptime
+		vterm_title  setting the window title by a job running in a
+			     terminal window
 		ALL	     clear all overrides ({val} is not used)
 
 		"starting" is to be used when a test should behave like
@@ -348,7 +370,7 @@ assert_fails({cmd} [, {error} [, {msg} [, {lnum} [, {context}]]]])
 		Run {cmd} and add an error message to |v:errors| if it does
 		NOT produce an error or when {error} is not found in the
 		error message.  Also see |assert-return|.
-
+							*E856*
 		When {error} is a string it must be found literally in the
 		first reported error. Most often this will be the error code,
 		including the colon, e.g. "E123:". >

runtime/doc/todo.txt

@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 8.2.  Last change: 2021 Dec 24
+*todo.txt*      For Vim version 8.2.  Last change: 2022 Jan 22
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -38,38 +38,22 @@ browser use: https://github.com/vim/vim/issues/1234
 							*known-bugs*
 -------------------- Known bugs and current work -----------------------
 
-type of v: vars should be more specific
-    v:completed_item  is dict<string>, not dict<any>
-
-E1135 is used twice
-
-"z=" in German can take a very long time, CTRL-C should interrupt it.
-
-Vim9 - Make everything work:
-- For builtin functions using tv_get_string*() use check_for_string() to be
-  more strict about the argument type (not a bool).
-    done: balloon_()
-- Check many more builtin function arguments at compile time.
-    map() could check that the return type of the function argument matches
-    the type of the list or dict member. (#8092)
-    Same for other functions, such as searchpair().
-- Test that a function defined inside a :def function is local to that
-  function, g: functions can be defined and script-local functions cannot be
-  defined.
-- Unexpected error message when using "var x: any | x.key = 9", because "x" is
-  given the type number.  Can we use VAR_ANY?
-- Check performance with callgrind and kcachegrind.
+Also set the script context for other "expr" options, like for 'foldexpr'?
+    'printexpr'     eval_printexpr()
+    "expr:" part of 'spellsuggest   eval_spell_expr()
 
 Once Vim9 is stable:
-- Add the "vim9script" feature, can use has('vim9script')
-- Change the help to prefer Vim9 syntax where appropriate
 - Add all the error numbers in a good place in documentation.
-- In the generic eval docs, point out the Vim9 syntax where it differs.
+    done until E1083
+- Check code coverage, add more tests if needed.
 - Use Vim9 for runtime files.
-    PR #7497 for autoload/ccomplete.vim
 
 Further Vim9 improvements, possibly after launch:
-- better implementation for partial and tests for that.
+- Check performance with callgrind and kcachegrind.
+- Better implementation for partial and tests for that.
+- when using "const" mark the variable type as const with TTFLAG_CONST, so
+  that an error is given at compile time when trying to change it.  E.g. for a
+  const list and trying to call add().
 - Compile options that are an expression, e.g. "expr:" in 'spellsuggest',
   'foldexpr', 'foldtext', 'printexpr', 'diffexpr', 'patchexpr', 'charconvert',
   'balloonexpr', 'includeexpr', 'indentexpr', 'formatexpr'.
@@ -78,10 +62,9 @@ Further Vim9 improvements, possibly after launch:
   evaluation.
   Use the location where the option was set for deciding whether it's to be
   evaluated in Vim9 script context.
-- Handle command that is only a range more efficient than calling ISN_EXEC
-- implement :type, "import type"
-- implement enum,  "import enum".
-- implement class and interface: See |vim9-classes|
+- implement :type
+- implement :enum
+- implement :class and :interface: See |vim9-classes|
 - For range: make table of first ASCII character with flag to quickly check if
   it can be a Vim9 command. E.g. "+" can, but "." can't.
 - Inline call to map() and filter(), better type checking.
@@ -219,6 +202,11 @@ Terminal emulator window:
 When using 'cryptmethod' xchaha20 the undo file is not encrypted.
 Need to handle extra bytes.
 
+In Select mode the deleted text always goes into the unnamed register.
+Use CTRL-R to specify the register to use. (#9531)
+
+Some prompts are not translated: #9495
+
 Test_communicate_ipv6(): is flaky on many systems
 Fails in line 64 of Ch_communicate, no exception is thrown.
 
@@ -253,10 +241,10 @@ Idea: when typing ":e /some/dir/" and "dir" does not exist, highlight in red.
 initialization to figure out the default value from 'shell'.  Add a test for
 this.
 
-Patch to add :argdedupe. (Nir Lichtman, #6235)
-
 MS-Windows: did path modifier :p:8 stop working?  #8600
 
+Add support for "underdouble", "underdot" and "underdash". #9553
+
 test_arglist func Test_all_not_allowed_from_cmdwin() hangs on MS-Windows.
 
 Mapping with partial match not executed properly in GTK. (Ingo Karkat, #7082)
@@ -918,9 +906,6 @@ With 'foldmethod' "indent" and appending an empty line, what follows isn't
 included in the existing fold.  Deleting the empty line and undo fixes it.
 (Oleg Koshovetc, 2018 Jul 15, #3214)
 
-Patch to support "xxd -ps". (Erik Auerswald, 2018 May 1)
-Lacks a test.
-
 Column number is wrong when using 'linebreak' and 'wrap'. (Keith Smiley, 2018
 Jan 15, #2555)
 

runtime/doc/usr_06.txt

@@ -189,7 +189,7 @@ You can specify #rrggbb hex colors and you can define new names for hex
 colors in |v:colornames| like so: >
 
 	let v:colornames['mine_red'] = '#aa0000'
-<
+
 If you are authoring a color scheme for others to use, it is important
 to define these colors only when they do not exist: >
 
@@ -197,7 +197,7 @@ to define these colors only when they do not exist: >
 
 This allows users of the color scheme to override the precise definition of
 that color prior to loading your color scheme. For example, in a |.vimrc|
-file:
+file: >
 
 	runtime colors/lists/css_colors.vim
 	let v:colornames['your_red'] = v:colornames['css_red']

runtime/doc/usr_40.txt

@@ -1,4 +1,4 @@
-*usr_40.txt*	For Vim version 8.2.  Last change: 2020 Sep 02
+*usr_40.txt*	For Vim version 8.2.  Last change: 2022 Jan 03
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -20,7 +20,7 @@ Table of contents: |usr_toc.txt|
 ==============================================================================
 *40.1*	Key mapping
 
-A simple mapping was explained in section |05.3|.  The principle is that one
+A simple mapping was explained in section |05.4|.  The principle is that one
 sequence of key strokes is translated into another sequence of key strokes.
 This is a simple, yet powerful mechanism.
    The simplest form is that one key is mapped to a sequence of keys.  Since

runtime/doc/various.txt

@@ -1,4 +1,4 @@
-*various.txt*   For Vim version 8.2.  Last change: 2021 Dec 20
+*various.txt*   For Vim version 8.2.  Last change: 2022 Jan 15
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -244,10 +244,10 @@ g8			Print the hex values of the bytes used in the
 			compiler will have set stdin to a non-interactive
 			mode.
 
-							*:!cmd* *:!* *E34*
+							*:!cmd* *:!*
 :!{cmd}			Execute {cmd} with the shell.  See also the 'shell'
 			and 'shelltype' option.
-
+							*E34*
 			Any '!' in {cmd} is replaced with the previous
 			external command (see also 'cpoptions').  But not when
 			there is a backslash before the '!', then that
@@ -476,9 +476,10 @@ N  *+toolbar*		|gui-toolbar|
 T  *+user_commands*	User-defined commands. |user-commands|
 			Always enabled since 8.1.1210.
 B  *+vartabs*		Variable-width tabstops. |'vartabstop'|
-N  *+viminfo*		|'viminfo'|
 T  *+vertsplit*		Vertically split windows |:vsplit|; Always enabled
 			since 8.0.1118.
+T  *+vim9script*	|Vim9| script
+N  *+viminfo*		|'viminfo'|
 T  *+virtualedit*	|'virtualedit'| Always enabled since 8.1.826.
 T  *+visual*		Visual mode |Visual-mode| Always enabled since 7.4.200.
 T  *+visualextra*	extra Visual mode commands |blockwise-operators|
@@ -569,19 +570,19 @@ N  *+X11*		Unix only: can restore window title |X11|
 :redi[r] END		End redirecting messages.
 
 							*:filt* *:filter*
-:filt[er][!] {pat} {command}
-:filt[er][!] /{pat}/ {command}
+:filt[er][!] {pattern} {command}
+:filt[er][!] /{pattern}/ {command}
 			Restrict the output of {command} to lines matching
-			with {pat}.  For example, to list only xml files: >
+			with {pattern}.  For example, to list only xml files: >
 				:filter /\.xml$/ oldfiles
 <			If the [!] is given, restrict the output of {command}
-			to lines that do NOT match {pat}.
+			to lines that do NOT match {pattern}.
 
-			{pat} is a Vim search pattern.  Instead of enclosing
+			{pattern} is a Vim search pattern.  Instead of enclosing
 			it in / any non-ID character (see |'isident'|) can be
-			used, so long as it does not appear in {pat}.  Without
-			the enclosing character the pattern cannot include the
-			bar character. 'ignorecase' is not used.
+			used, so long as it does not appear in {pattern}.
+			Without the enclosing character the pattern cannot
+			include the bar character. 'ignorecase' is not used.
 
 			The pattern is matched against the relevant part of
 			the output, not necessarily the whole line. Only some

runtime/doc/vim-ja.UTF-8.1

@@ -166,7 +166,7 @@ Note: "+" と "\-c" は合わせて 10 個まで指定できます。
 .TP
 \-d
 差分モードで起動します。
-二つか三つの四つのファイルを引数に指定してください。
+2 個から 8 個のファイルを引数に指定してください。
 指定されたファイルが開かれ、それらのファイルの差分が表示されます。
 vimdiff(1) と同様の動作です。
 .TP
@@ -217,8 +217,7 @@ GUI がサポートされている場合は、GUI で起動します。
 サポートされていない場合はエラーメッセージを表示して終了します。
 .TP
 \-i {viminfo}
-viminfo ファイルを使う設定になっている場合は、初期設定の "~/.viminfo"
-の代わりに、指定されたファイルを設定します。
+初期設定の "~/.viminfo" の代わりに、viminfo ファイルを読み書きする際に使うファイル名を指定します。
 "NONE" を指定すると、.viminfo ファイルを使わないように設定できます。
 .TP
 \-L
@@ -356,6 +355,10 @@ X サーバーと通信しません。端末での起動時間を短くできま
 これ以降の引数はすべてファイル名として扱われます。
 ファイル名が '\-' で始まっているファイルを開くときに使ってください。
 .TP
+\-\-clean
+一切の個人設定 (vimrc、プラグイン、その他) を使用しません。
+ある問題がクリーンな Vim セットアップで再現するかを確認するのに有用です。
+.TP
 \-\-echo\-wid
 GTK GUI のみ: Window ID を標準出力に出力します。
 .TP
@@ -398,6 +401,9 @@ Vim サーバーの一覧を表示します。
 \-\-socketid {id}
 GTK GUI のみ: GtkPlug メカニズムを使って gvim を別のウィンドウの中で実行します。
 .TP
+\-\-startuptime {file}
+起動処理の間、経過時間のメッセージをファイル {fname} に書き出します。
+.TP
 \-\-version
 バージョン情報を表示して終了します。
 .SH オンラインヘルプ

runtime/doc/vim.1

@@ -1,4 +1,4 @@
-.TH VIM 1 "2006 Apr 11"
+.TH VIM 1 "2021 Jun 13"
 .SH NAME
 vim \- Vi IMproved, a programmer's text editor
 .SH SYNOPSIS

runtime/doc/vim.man

@@ -432,4 +432,4 @@ BUGS
 
 
 
-                                  2006 Apr 11                           VIM(1)
+                                  2021 Jun 13                           VIM(1)

runtime/doc/vim9.txt

@@ -1,17 +1,14 @@
-*vim9.txt*	For Vim version 8.2.  Last change: 2021 Dec 22
+*vim9.txt*	For Vim version 8.2.  Last change: 2022 Jan 23
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
 
 
-THIS IS STILL UNDER DEVELOPMENT - ANYTHING CAN BREAK - ANYTHING CAN CHANGE
-
 Vim9 script commands and expressions.			*Vim9* *vim9*
 
 Most expression help is in |eval.txt|.  This file is about the new syntax and
 features in Vim9 script.
 
-THIS IS STILL UNDER DEVELOPMENT - ANYTHING CAN BREAK - ANYTHING CAN CHANGE
 
 
 1.  What is Vim9 script?		|Vim9-script|
@@ -27,8 +24,6 @@ THIS IS STILL UNDER DEVELOPMENT - ANYTHING CAN BREAK - ANYTHING CAN CHANGE
 
 1. What is Vim9 script?					*Vim9-script*
 
-THIS IS STILL UNDER DEVELOPMENT - ANYTHING CAN BREAK - ANYTHING CAN CHANGE
-
 Vim script has been growing over time, while preserving backwards
 compatibility.  That means bad choices from the past often can't be changed
 and compatibility with Vi restricts possible solutions.  Execution is quite
@@ -76,8 +71,6 @@ rewrite old scripts, they keep working as before.  You may want to use a few
 
 2. Differences from legacy Vim script			*vim9-differences*
 
-THIS IS STILL UNDER DEVELOPMENT - ANYTHING CAN BREAK - ANYTHING CAN CHANGE
-
 Overview ~
 
 Brief summary of the differences you will most often encounter when using Vim9
@@ -88,7 +81,7 @@ script and `:def` functions; details are below:
 	echo "hello "
 	     .. yourName
 	     .. ", how are you?"
-- White space is required in many places.
+- White space is required in many places to improve readability.
 - Assign values without `:let`, declare variables with `:var`: >
 	var count = 0
 	count += 3
@@ -101,8 +94,8 @@ script and `:def` functions; details are below:
 	def CallMe(count: number, message: string): bool
 - Call functions without `:call`: >
 	writefile(['done'], 'file.txt')
-- You cannot use `:xit`, `:t`, `:k`, `:append`, `:change`, `:insert`, `:open`,
-  and `:s` or `:d` with only flags.
+- You cannot use old Ex commands `:xit`, `:t`, `:k`, `:append`, `:change`,
+  `:insert`, `:open`, and `:s` or `:d` with only flags.
 - You cannot use curly-braces names.
 - A range before a command must be prefixed with a colon: >
 	:%s/this/that
@@ -110,6 +103,8 @@ script and `:def` functions; details are below:
   `:exe`: >
   	:exe @a
 - Unless mentioned specifically, the highest |scriptversion| is used.
+- When defining an expression mapping, the expression will be evaluated in the
+  context of the script where it was defined.
 
 
 Comments starting with # ~
@@ -127,7 +122,7 @@ is the same as in shell scripts and Python programs.
 
 In Vi # is a command to list text with numbers.  In Vim9 script you can use
 `:number` for that. >
-	101 number
+	:101 number
 
 To improve readability there must be a space between a command and the #
 that starts a comment: >
@@ -195,7 +190,7 @@ functions.
 
 Arguments are accessed by name, without "a:", just like any other language.
 There is no "a:" dictionary or "a:000" list.
-						*vim9-variable-arguments*
+					*vim9-variable-arguments* *E1055*
 Variable arguments are defined as the last argument, with a name and have a
 list type, similar to TypeScript.  For example, a list of numbers: >
 	def MyFunc(...itemlist: list<number>)
@@ -232,7 +227,7 @@ the "name#" prefix is sufficient. >
 	def s:ThisFunction()        # script-local
 	def g:ThatFunction()        # global
 	def scriptname#function()   # autoload
-
+<						*E1058* *E1075*
 When using `:function` or `:def` to specify a nested function inside a `:def`
 function and no namespace was given, this nested function is local to the code
 block it is defined in.  In a `:def` function it is not possible to define a
@@ -294,7 +289,8 @@ some point when loaded again.  E.g. when a buffer local option is set: >
 
 
 Variable declarations with :var, :final and :const ~
-						*vim9-declaration* *:var*
+					*vim9-declaration* *:var*
+					*E1017* *E1020* *E1054*
 Local variables need to be declared with `:var`.  Local constants need to be
 declared with `:final` or `:const`.  We refer to both as "variables" in this
 section.
@@ -325,7 +321,7 @@ The declaration must be done earlier: >
 	   inner = 0
 	endif
 	echo inner
-
+<							*E1025*
 To intentionally hide a variable from code that follows, a block can be
 used: >
 	{
@@ -352,13 +348,15 @@ And with autocommands: >
 	   }
 
 Although using a :def function probably works better.
-
+						*E1022*
 Declaring a variable with a type but without an initializer will initialize to
-zero, false or empty.
-
+false (for bool), empty (for string, list, dict, etc.) or zero (for number,
+any, etc.).  This matters especially when using the "any" type, the value will
+default to the number zero.
+						*E1016* *E1052* *E1066*
 In Vim9 script `:let` cannot be used.  An existing variable is assigned to
 without any command.  The same for global, window, tab, buffer and Vim
-variables, because they are not really declared.  They can also be deleted
+variables, because they are not really declared.  Those can also be deleted
 with `:unlet`.
 
 `:lockvar` does not work on local variables.  Use `:const` and `:final`
@@ -366,7 +364,7 @@ instead.
 
 The `exists()` and `exists_compiled()` functions do not work on local variables
 or arguments.
-
+						*E1006* *E1041*
 Variables, functions and function arguments cannot shadow previously defined
 or imported variables and functions in the same script file.
 Variables may shadow Ex commands, rename the variable if needed.
@@ -396,8 +394,8 @@ later.  Example: >
 	  endif
 	enddef
 
-If you would do it like this you get an error at compile time that
-"PluginFunc" does not exist, even when "g:loaded_plugin" does not exist: >
+If you do it like this, you get an error at compile time that "PluginFunc"
+does not exist, even when "g:loaded_plugin" does not exist: >
 	def CallPluginFunc()
 	  if exists('g:loaded_plugin')
 	    PluginFunc()   # Error - function not found
@@ -434,7 +432,7 @@ How constants work varies between languages.  Some consider a variable that
 can't be assigned another value a constant.  JavaScript is an example.  Others
 also make the value immutable, thus when a constant uses a list, the list
 cannot be changed.  In Vim9 we can use both.
-
+							*E1021*
 `:const` is used for making both the variable and the value a constant.  Use
 this for composite structures that you want to make sure will not be modified.
 Example: >
@@ -567,7 +565,7 @@ characters, e.g.: >
 	   })
 No command can follow the "{", only a comment can be used there.
 
-							*command-block*
+						*command-block* *E1026*
 The block can also be used for defining a user command.  Inside the block Vim9
 syntax will be used.
 
@@ -602,7 +600,7 @@ Also when confused with the start of a command block: >
 
 
 Automatic line continuation ~
-
+						*vim9-line-continuation*
 In many cases it is obvious that an expression continues on the next line.  In
 those cases there is no need to prefix the line with a backslash (see
 |line-continuation|).  For example, when a list spans multiple lines: >
@@ -687,6 +685,11 @@ This will assign "start" and print a line: >
 	var result = start
 	:+ print
 
+After the range an Ex command must follow.  Without the colon you can call a
+function without `:call`, but after a range you do need it: >
+	MyFunc()
+	:% call MyFunc()
+
 Note that the colon is not required for the |+cmd| argument: >
 	edit +6 fname
 
@@ -735,7 +738,7 @@ Notes:
 
 
 White space ~
-
+					*E1004* *E1068* *E1069* *E1074*
 Vim9 script enforces proper use of white space.  This is no longer allowed: >
 	var name=234	# Error!
 	var name= 234	# Error!
@@ -780,7 +783,7 @@ No curly braces expansion ~
 
 
 Dictionary literals ~
-
+						*vim9-literal-dict* *E1014*
 Traditionally Vim has supported dictionary literals with a {} syntax: >
 	let dict = {'key': value}
 
@@ -870,7 +873,7 @@ first if needed.
 
 
 Conditions and expressions ~
-
+						*vim9-boolean*
 Conditions and expressions are mostly working like they do in other languages.
 Some values are different from legacy Vim script:
 	value		legacy Vim script	Vim9 script ~
@@ -922,9 +925,9 @@ always converted to string: >
 	'hello ' .. 123  == 'hello 123'
 	'hello ' .. v:true  == 'hello true'
 
-Simple types are string, float, special and bool.  For other types |string()|
-can be used.
-							*false* *true* *null*
+Simple types are Number, Float, Special and Bool.  For other types |string()|
+should be used.
+						*false* *true* *null* *E1034*
 In Vim9 script one can use "true" for v:true, "false" for v:false and "null"
 for v:null.  When converting a boolean to a string "false" and "true" are
 used, not "v:false" and "v:true" like in legacy script.  "v:none" is not
@@ -1067,17 +1070,19 @@ Using ++var or --var in an expression is not supported yet.
 
 3. New style functions					*fast-functions*
 
-THIS IS STILL UNDER DEVELOPMENT - ANYTHING CAN BREAK - ANYTHING CAN CHANGE
-
-							*:def*
+							*:def* *E1028*
 :def[!] {name}([arguments])[: {return-type}]
 			Define a new function by the name {name}.  The body of
 			the function follows in the next lines, until the
-			matching `:enddef`.
-
-			When {return-type} is omitted or is "void" the
-			function is not expected to return anything.
-			
+			matching `:enddef`. *E1073*
+							*E1011*
+			The {name} must be less than 100 bytes long.
+					*E1003* *E1027* *E1056* *E1059*
+			The type of value used with `:return` must match
+			{return-type}.  When {return-type} is omitted or is
+			"void" the function is not expected to return
+			anything.
+							*E1077*	
 			{arguments} is a sequence of zero or more argument
 			declarations.  There are three forms:
 				{name}: {type}
@@ -1101,7 +1106,7 @@ THIS IS STILL UNDER DEVELOPMENT - ANYTHING CAN BREAK - ANYTHING CAN CHANGE
 			later in Vim9 script.  They can only be removed by
 			reloading the same script.
 
-							*:enddef*
+							*:enddef* *E1057*
 :enddef			End of a function defined with `:def`. It should be on
 			a line by its own.
 
@@ -1121,7 +1126,7 @@ prefix if they do not exist at the time of compiling.
 
 						*:disa* *:disassemble*
 :disa[ssemble] {func}	Show the instructions generated for {func}.
-			This is for debugging and testing.
+			This is for debugging and testing. *E1061*
 			Note that for command line completion of {func} you
 			can prepend "s:" to find script-local functions.
 
@@ -1183,9 +1188,8 @@ for each closure call a function to define it: >
 ==============================================================================
 
 4. Types					*vim9-types*
-
-THIS IS STILL UNDER DEVELOPMENT - ANYTHING CAN BREAK - ANYTHING CAN CHANGE
-
+					*E1008* *E1009* *E1010* *E1012*
+					*E1013* *E1029* *E1030*
 The following builtin types are supported:
 	bool
 	number
@@ -1200,17 +1204,19 @@ The following builtin types are supported:
 	func: {type}
 	func({type}, ...)
 	func({type}, ...): {type}
+	void
 
 Not supported yet:
 	tuple<a: {type}, b: {type}, ...>
 
 These types can be used in declarations, but no simple value will actually
-have the "void" type.
+have the "void" type.  Trying to use a void (e.g. a function without a
+return value) results in error *E1031* .
 
 There is no array type, use list<{type}> instead.  For a list constant an
 efficient implementation is used that avoids allocating lot of small pieces of
 memory.
-
+							*E1005* *E1007*
 A partial and function can be declared in more or less specific ways:
 func				any kind of function reference, no type
 				checking for arguments or return value
@@ -1366,14 +1372,20 @@ Same for |extend()|, use |extendnew()| instead, and for |flatten()|, use
 5. Namespace, Import and Export
 					*vim9script* *vim9-export* *vim9-import*
 
-THIS IS STILL UNDER DEVELOPMENT - ANYTHING CAN BREAK - ANYTHING CAN CHANGE
+A Vim9 script can be written to be imported.  This means that some items are
+intentionally exported, made available to other scripts.  When the exporting
+script is imported in another script, these exported items can then be used in
+that script.  All the other items remain script-local in the exporting script
+and cannot be accessed by the importing script.
 
-A Vim9 script can be written to be imported.  This means that everything in
-the script is local, unless exported.  Those exported items, and only those
-items, can then be imported in another script.
+This mechanism exists for writing a script that can be sourced (imported) by
+other scripts, while making sure these other scripts only have access to what
+you want them to.  This also avoids using the global namespace, which has a
+risc of name collisions.  For example when you have two plugins with similar
+functionality.
 
-You can cheat by using the global namespace explicitly.  We will assume here
-that you don't do that.
+You can cheat by using the global namespace explicitly.  That should be done
+only for things that really are global.
 
 
 Namespace ~
@@ -1402,6 +1414,7 @@ One of the effects is that |line-continuation| is always enabled.
 The original value of 'cpoptions' is restored at the end of the script, while
 flags added or removed in the script are also added to or removed from the
 original value to get the same effect.  The order of flags may change.
+In the |vimrc| file sourced on startup this does not happen.
 
 							*vim9-mix*
 There is one way to use both legacy and Vim9 syntax in one script file: >
@@ -1421,9 +1434,6 @@ This can only work in two ways:
 2. The "if" statement evaluates to true, the commands up to `endif` are
    executed and `finish` bails out before reaching `vim9script`.
 
-TODO: The "vim9script" feature does not exist yet, it will only be added once
-the Vim9 script syntax has been fully implemented.
-
 
 Export ~
 							*:export* *:exp*
@@ -1435,7 +1445,7 @@ Exporting an item can be written as: >
 	export def MyFunc() ...
 	export class MyClass ...
 	export interface MyClass ...
-
+<							*E1043* *E1044*
 As this suggests, only constants, variables, `:def` functions and classes can
 be exported. {not implemented yet: class, interface}
 
@@ -1444,25 +1454,40 @@ be exported. {not implemented yet: class, interface}
 
 
 Import ~
-						*:import* *:imp* *E1094*
-The exported items can be imported individually in another Vim9 script: >
-	import EXPORTED_CONST from "thatscript.vim"
-	import MyClass from "myclass.vim"
+					*:import* *:imp* *E1094* *E1047*
+					*E1048* *E1049* *E1053* *E1071*
+The exported items can be imported in another Vim9 script: >
+	import "myscript.vim"
 
-To import multiple items at the same time: >
-	import {someValue, MyClass} from "thatscript.vim"
+This makes each item available as "myscript.item".
+							*:import-as*
+In case the name is long or ambiguous, another name can be specified: >
+	import "thatscript.vim" as that
+<							*E1060*
+Then you can use "that.EXPORTED_CONST", "that.someValue", etc.  You are free
+to choose the name "that".  Use something that will be recognized as referring
+to the imported script.  Avoid command names and builtin function names,
+because the name will shadow them.  If the name starts with a capital letter
+it can also shadow global user commands and functions.  Also, you cannot use
+the name for something else in the script, such as a function or variable
+name.
 
-In case the name is ambiguous, another name can be specified: >
-	import MyClass as ThatClass from "myclass.vim"
-	import {someValue, MyClass as ThatClass} from "myclass.vim"
+In case the dot in the name is undesired, a local reference can be made for a
+function: >
+	var LongFunc = that.LongFuncName
 
-To import all exported items under a specific identifier: >
-	import * as That from 'thatscript.vim'
+This also works for constants: >
+	const MAXLEN = that.MAX_LEN_OF_NAME
 
-Then you can use "That.EXPORTED_CONST", "That.someValue", etc.  You are free
-to choose the name "That", but it is highly recommended to use the name of the
-script file to avoid confusion.  Also avoid command names, because the name
-will shadow them.
+This does not work for variables, since the value would be copied once and
+when changing the variable the copy will change, not the original variable.
+You will need to use the full name, with the dot.
+
+The full syntax of the command is:
+	import {filename} [as {name}]
+Where {filename} is an expression that must evaluate to a string.  Without the
+"as {name}" part it must end in ".vim".  {name} must consist of letters,
+digits and '_', like |internal-variables|.
 
 `:import` can also be used in legacy Vim script.  The imported items still
 become script-local, even when the "s:" prefix is not given.
@@ -1481,53 +1506,86 @@ The script name after `import` can be:
   longer and unique, to avoid loading the wrong file.
   Note that "after/import" is not used.
 
+If the name does not end in ".vim" then the use of "as name" is required.
+
 Once a vim9 script file has been imported, the result is cached and used the
 next time the same script is imported.  It will not be read again.
-							*:import-cycle*
+
+It is not allowed to import the same script twice, also when using two
+different "as" names.
+
+When using the imported name the dot and the item name must be in the same
+line, there can be no line break: >
+	echo that.
+		name   # Error!
+	echo that
+		.name  # Error!
+<							*:import-cycle*
 The `import` commands are executed when encountered.  If that script (directly
 or indirectly) imports the current script, then items defined after the
 `import` won't be processed yet.  Therefore cyclic imports can exist, but may
 result in undefined items.
 
 
-Import in an autoload script ~
-
+Importing an autoload script ~
+							*vim9-autoload*
 For optimal startup speed, loading scripts should be postponed until they are
-actually needed.  A recommended mechanism:
+actually needed.  Using the autoload mechanism is recommended:
 
 1. In the plugin define user commands, functions and/or mappings that refer to
-   an autoload script. >
-	command -nargs=1 SearchForStuff searchfor#Stuff(<f-args>)
+   items imported from an autoload script. >
+	import autoload 'for/search.vim'
+	command -nargs=1 SearchForStuff search.Stuff(<f-args>)
 
 <   This goes in .../plugin/anyname.vim.  "anyname.vim" can be freely chosen.
+   The "SearchForStuff" command is now available to the user.
 
-2. In the autoload script do the actual work.  You can import items from
-   other files to split up functionality in appropriate pieces. >
+   The "autoload" argument to `:import` means that the script is not loaded
+   until one of the items is actually used.  The script will be found under
+   the "autoload" directory in 'runtimepath' instead of the "import"
+   directory.
+
+2. In the autoload script put the bulk of the code. >
 	vim9script
-	import FilterFunc from "../import/someother.vim"
-	def searchfor#Stuff(arg: string)
-	  var filtered = FilterFunc(arg)
+	export def Stuff(arg: string)
 	  ...
-<   This goes in .../autoload/searchfor.vim.  "searchfor" in the file name
-   must be exactly the same as the prefix for the function name, that is how
-   Vim finds the file.
 
-3. Other functionality, possibly shared between plugins, contains the exported
-   items and any private items. >
-	vim9script
-	var localVar = 'local'
-	export def FilterFunc(arg: string): string
-	   ...
-<   This goes in .../import/someother.vim.
+<   This goes in .../autoload/for/search.vim.
+
+   Putting the "search.vim" script under the "/autoload/for/" directory has
+   the effect that "for#search#" will be prefixed to every exported item.  The
+   prefix is obtained from the file name, as you would to manually in a
+   legacy autoload script.  Thus the exported function can be found with
+   "for#search#Stuff", but you would normally use `import autoload` and not
+   use the prefix.
+
+   You can split up the functionality and import other scripts from the
+   autoload script as you like.  This way you can share code between plugins.
+
+For defining a mapping that uses the imported autoload script the special key
+|<ScriptCmd>| is useful.  It allows for a command in a mapping to use the
+script context of where the mapping was defined.
 
 When compiling a `:def` function and a function in an autoload script is
 encountered, the script is not loaded until the `:def` function is called.
+This also means you get any errors only at runtime, since the argument and
+return types are not known yet.
+
+For testing the |test_override()| function can be used to have the
+`import autoload` load the script right away, so that the items and types can
+be checked without waiting for them to be actually used: >
+	test_override('autoload', 1)
+Reset it later with: >
+	test_override('autoload', 0)
+Or: >
+	test_override('ALL', 0)
 
 
 Import in legacy Vim script ~
 
 If an `import` statement is used in legacy Vim script, the script-local "s:"
-namespace will be used for the imported item, even when "s:" is not specified.
+namespace will be used for the imported items, even when "s:" is not
+specified.
 
 
 ==============================================================================
@@ -1681,7 +1739,8 @@ Specific items from TypeScript we avoid:
 - TypeScript can use an expression like "99 || 'yes'" in a condition, but
   cannot assign the value to a boolean.  That is inconsistent and can be
   annoying.  Vim recognizes an expression with && or || and allows using the
-  result as a bool.  TODO: to be reconsidered
+  result as a bool.  The |falsy-operator| was added for the mechanism to use a
+  default value.
 - TypeScript considers an empty string as Falsy, but an empty list or dict as
   Truthy.  That is inconsistent.  In Vim an empty list and dict are also
   Falsy.

runtime/doc/vimdiff-ja.UTF-8.1

@@ -1,15 +1,15 @@
 .TH VIMDIFF 1 "2001 March 30"
 .SH 名前
-vimdiff \- 二つか三つか四つのファイルを Vim で開いて、その差分を表示する
+vimdiff \- 2 個から 8 個のファイルを Vim で開いて、その差分を表示する
 .SH 書式
 .br
 .B vimdiff
-[options] file1 file2 [file3 [file4]]
+[options] file1 file2 [file3 [file4 [file5 [file6 [file7 [file8]]]]]]
 .PP
 .B gvimdiff
 .SH 説明
 .B Vimdiff
-は、二つ (か三つか四つ) のファイルを
+は、2 個から 8 個のファイルを
 .B Vim
 で開きます。
 ファイルは個別のウィンドウで開かれ、差分が強調表示されます。

runtime/doc/visual.txt

@@ -1,4 +1,4 @@
-*visual.txt*    For Vim version 8.2.  Last change: 2021 Nov 21
+*visual.txt*    For Vim version 8.2.  Last change: 2022 Jan 20
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -488,6 +488,11 @@ Commands in Select mode:
 - ESC stops Select mode.
 - CTRL-O switches to Visual mode for the duration of one command. *v_CTRL-O*
 - CTRL-G switches to Visual mode.
+- CTRL-R {register} selects the register to be used for the text that is
+  deleted when typing text.					  *v_CTRL-R*
+  Unless you specify the "_" (black hole) register, the unnamed register is
+  also overwritten.
+
 
 Otherwise, typed characters are handled as in Visual mode.
 

runtime/doc/windows.txt

@@ -1,4 +1,4 @@
-*windows.txt*   For Vim version 8.2.  Last change: 2021 Nov 29
+*windows.txt*   For Vim version 8.2.  Last change: 2022 Jan 08
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -146,7 +146,7 @@ highlight group (|hl-EndOfBuffer|) can be used to change the highlighting of
 the filler characters.
 
 ==============================================================================
-3. Opening and closing a window				*opening-window* *E36*
+3. Opening and closing a window				*opening-window*
 
 CTRL-W s						*CTRL-W_s*
 CTRL-W S						*CTRL-W_S*
@@ -246,6 +246,10 @@ CTRL-W :	Does the same as typing |:| - enter a command line.  Useful in a
 
 Note that the 'splitbelow' and 'splitright' options influence where a new
 window will appear.
+								*E36*
+Creating a window will fail if there is not enough room.  Every window needs
+at least one screen line and column, sometimes more.   Options 'winminheight'
+and 'winminwidth' are relevant.
 
 						*:vert* *:vertical*
 :vert[ical] {cmd}

runtime/doc/xxd-ja.UTF-8.1

@@ -74,6 +74,7 @@
 一行
 .RI < cols >
 オクテットで出力する。標準設定は 16 (\-i: 12, \-ps: 30, \-b: 6)。最大 256。
+\-ps には最大値がありません。 \-ps 付きの場合、0 を指定すると単一の長い行で出力されます。
 .TP
 .IR \-C " | " \-capitalize
 \-i を使用した際に、C インクルードファイル形式の変数名を大文字にする。

runtime/doc/xxd.1

@@ -70,6 +70,7 @@ followed by an ascii (or ebcdic) representation. The command line switches
 Format
 .RI < cols >
 octets per line. Default 16 (\-i: 12, \-ps: 30, \-b: 6). Max 256.
+No maxmimum for \-ps. With \-ps, 0 results in one long line of output.
 .TP
 .IR \-C " | " \-capitalize
 Capitalize variable names in C include file style, when using \-i.

runtime/doc/xxd.man

@@ -42,7 +42,8 @@ OPTIONS
 
        -c cols | -cols cols
               Format  <cols> octets per line. Default 16 (-i: 12, -ps: 30, -b:
-              6). Max 256.
+              6). Max 256.  No maxmimum for -ps. With -ps, 0  results  in  one
+              long line of output.
 
        -C | -capitalize
               Capitalize variable names in C include file  style,  when  using

runtime/filetype.vim

@@ -1,7 +1,7 @@
 " Vim support file to detect file types
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2021 Dec 22
+" Last Change:	2022 Jan 23
 
 " Listen very carefully, I will say this only once
 if exists("did_load_filetypes")
@@ -193,7 +193,8 @@ au BufNewFile,BufRead *.awk,*.gawk		setf awk
 au BufNewFile,BufRead *.mch,*.ref,*.imp		setf b
 
 " BASIC or Visual Basic
-au BufNewFile,BufRead *.bas			call dist#ft#FTVB("basic")
+au BufNewFile,BufRead *.bas			call dist#ft#FTbas()
+au BufNewFile,BufRead *.bi,*.bm			call dist#ft#FTbas()
 
 " Visual Basic Script (close to Visual Basic) or Visual Basic .NET
 au BufNewFile,BufRead *.vb,*.vbs,*.dsm,*.ctl	setf vb
@@ -202,7 +203,7 @@ au BufNewFile,BufRead *.vb,*.vbs,*.dsm,*.ctl	setf vb
 au BufNewFile,BufRead *.iba,*.ibi		setf ibasic
 
 " FreeBasic file (similar to QBasic)
-au BufNewFile,BufRead *.fb,*.bi			setf freebasic
+au BufNewFile,BufRead *.fb			setf freebasic
 
 " Batch file for MSDOS.
 au BufNewFile,BufRead *.bat,*.sys		setf dosbatch
@@ -397,6 +398,7 @@ au BufNewFile,BufRead configure.in,configure.ac setf config
 au BufNewFile,BufRead *.cu,*.cuh		setf cuda
 
 " Dockerfile; Podman uses the same syntax with name Containerfile
+" Also see Dockerfile.* below.
 au BufNewFile,BufRead Containerfile,Dockerfile,*.Dockerfile	setf dockerfile
 
 " WildPackets EtherPeek Decoder
@@ -496,7 +498,7 @@ au BufNewFile,BufRead */debian/patches/*	call dist#ft#Dep3patch()
 " Diff files
 au BufNewFile,BufRead *.diff,*.rej		setf diff
 au BufNewFile,BufRead *.patch
-	\ if getline(1) =~ '^From [0-9a-f]\{40\} Mon Sep 17 00:00:00 2001$' |
+	\ if getline(1) =~# '^From [0-9a-f]\{40,\} Mon Sep 17 00:00:00 2001$' |
 	\   setf gitsendemail |
 	\ else |
 	\   setf diff |
@@ -652,6 +654,9 @@ au BufNewFile,BufRead *.fsl			setf framescript
 " FStab
 au BufNewFile,BufRead fstab,mtab		setf fstab
 
+" Fusion
+au BufRead,BufNewFile *.fusion			setf fusion
+
 " F# or Forth
 au BufNewFile,BufRead *.fs			call dist#ft#FTfs()
 
@@ -664,6 +669,12 @@ au BufNewFile,BufRead .gdbinit,gdbinit		setf gdb
 " GDMO
 au BufNewFile,BufRead *.mo,*.gdmo		setf gdmo
 
+" GDscript
+au BufNewFile,BufRead *.gd			setf gdscript
+
+" Godot resource
+au BufRead,BufNewFile *.tscn,*.tres			setf gdresource
+
 " Gedcom
 au BufNewFile,BufRead *.ged,lltxxxxx.txt	setf gedcom
 
@@ -675,26 +686,28 @@ autocmd BufRead,BufNewFile *.gift		setf gift
 
 " Git
 au BufNewFile,BufRead COMMIT_EDITMSG,MERGE_MSG,TAG_EDITMSG	setf gitcommit
-au BufNewFile,BufRead *.git/config,.gitconfig,/etc/gitconfig	setf gitconfig
+au BufNewFile,BufRead NOTES_EDITMSG,EDIT_DESCRIPTION		setf gitcommit
+au BufNewFile,BufRead *.git/config,.gitconfig,*/etc/gitconfig	setf gitconfig
 au BufNewFile,BufRead */.config/git/config			setf gitconfig
+au BufNewFile,BufRead *.git/config.worktree			setf gitconfig
+au BufNewFile,BufRead *.git/worktrees/*/config.worktree		setf gitconfig
 au BufNewFile,BufRead .gitmodules,*.git/modules/*/config	setf gitconfig
 if !empty($XDG_CONFIG_HOME)
   au BufNewFile,BufRead $XDG_CONFIG_HOME/git/config		setf gitconfig
 endif
 au BufNewFile,BufRead git-rebase-todo		setf gitrebase
 au BufRead,BufNewFile .gitsendemail.msg.??????	setf gitsendemail
-au BufNewFile,BufRead .msg.[0-9]*
-      \ if getline(1) =~ '^From.*# This line is ignored.$' |
-      \   setf gitsendemail |
-      \ endif
 au BufNewFile,BufRead *.git/*
-      \ if getline(1) =~ '^\x\{40\}\>\|^ref: ' |
+      \ if getline(1) =~# '^\x\{40,\}\>\|^ref: ' |
       \   setf git |
       \ endif
 
 " Gkrellmrc
 au BufNewFile,BufRead gkrellmrc,gkrellmrc_?	setf gkrellmrc
 
+" GLSL
+au BufNewFile,BufRead *.glsl			setf glsl
+
 " GP scripts (2.0 and onward)
 au BufNewFile,BufRead *.gp,.gprc		setf gp
 
@@ -715,15 +728,19 @@ au BufNewFile,BufRead gitolite.conf		setf gitolite
 au BufNewFile,BufRead {,.}gitolite.rc,example.gitolite.rc	setf perl
 
 " Gnuplot scripts
-au BufNewFile,BufRead *.gpi			setf gnuplot
+au BufNewFile,BufRead *.gpi,.gnuplot		setf gnuplot
 
 " Go (Google)
 au BufNewFile,BufRead *.go			setf go
 au BufNewFile,BufRead Gopkg.lock		setf toml
+au BufRead,BufNewFile go.work			setf gowork
 
 " GrADS scripts
 au BufNewFile,BufRead *.gs			setf grads
 
+" GraphQL
+au BufNewFile,BufRead *.graphql,*.graphqls,*.gql			setf graphql
+
 " Gretl
 au BufNewFile,BufRead *.gretl			setf gretl
 
@@ -739,12 +756,18 @@ au BufNewFile,BufRead */etc/group,*/etc/group-,*/etc/group.edit,*/etc/gshadow,*/
 " GTK RC
 au BufNewFile,BufRead .gtkrc,gtkrc		setf gtkrc
 
+" Hack
+au BufRead,BufNewFile *.hack,*.hackpartial			setf hack
+
 " Haml
 au BufNewFile,BufRead *.haml			setf haml
 
 " Hamster Classic | Playground files
 au BufNewFile,BufRead *.hsm			setf hamster
 
+" Handlebars
+au BufNewFile,BufRead *.hbs			setf handlebars
+
 " Haskell
 au BufNewFile,BufRead *.hs,*.hsc,*.hs-boot,*.hsig setf haskell
 au BufNewFile,BufRead *.lhs			setf lhaskell
@@ -757,12 +780,21 @@ au BufNewFile,BufRead cabal.config		setf cabalconfig
 au BufNewFile,BufRead *.ht			setf haste
 au BufNewFile,BufRead *.htpp			setf hastepreproc
 
+" HCL
+au BufRead,BufNewFile *.hcl			setf hcl
+
 " Hercules
 au BufNewFile,BufRead *.vc,*.ev,*.sum,*.errsum	setf hercules
 
+" HEEx
+au BufRead,BufNewFile *.heex			setf heex
+
 " HEX (Intel)
 au BufNewFile,BufRead *.hex,*.h32		setf hex
 
+" Hjson
+au BufNewFile,BufRead *.hjson			setf hjson
+
 " Hollywood
 au BufRead,BufNewFile *.hws			setf hollywood
 
@@ -887,6 +919,9 @@ au BufNewFile,BufRead *.jov,*.j73,*.jovial	setf jovial
 " JSON
 au BufNewFile,BufRead *.json,*.jsonp,*.webmanifest	setf json
 
+" JSON5
+au BufNewFile,BufRead *.json5			setf json5
+
 " JSON Patch (RFC 6902)
 au BufNewFile,BufRead *.json-patch			setf json
 
@@ -938,6 +973,9 @@ au BufNewFile,BufRead *.ldif			setf ldif
 " Ld loader
 au BufNewFile,BufRead *.ld			setf ld
 
+" Ledger
+au BufRead,BufNewFile *.ldg,*.ledger,*.journal			setf ledger
+
 " Less
 au BufNewFile,BufRead *.less			setf less
 
@@ -962,9 +1000,9 @@ au BufNewFile,BufRead lilo.conf			setf lilo
 " Lisp (*.el = ELisp, *.cl = Common Lisp)
 " *.jl was removed, it's also used for Julia, better skip than guess wrong.
 if has("fname_case")
-  au BufNewFile,BufRead *.lsp,*.lisp,*.el,*.cl,*.L,.emacs,.sawfishrc setf lisp
+  au BufNewFile,BufRead *.lsp,*.lisp,*.asd,*.el,*.cl,*.L,.emacs,.sawfishrc setf lisp
 else
-  au BufNewFile,BufRead *.lsp,*.lisp,*.el,*.cl,.emacs,.sawfishrc setf lisp
+  au BufNewFile,BufRead *.lsp,*.lisp,*.asd,*.el,*.cl,.emacs,.sawfishrc setf lisp
 endif
 
 " SBCL implementation of Common Lisp
@@ -1175,6 +1213,9 @@ au BufNewFile,BufRead *.nginx,nginx*.conf,*nginx.conf,*/etc/nginx/*,*/usr/local/
 " Ninja file
 au BufNewFile,BufRead *.ninja			setf ninja
 
+" Nix
+au BufRead,BufNewFile *.nix			setf nix
+
 " NPM RC file
 au BufNewFile,BufRead npmrc,.npmrc		setf dosini
 
@@ -1216,6 +1257,9 @@ au BufNewFile,BufRead *.xom,*.xin		setf omnimark
 " OPAM
 au BufNewFile,BufRead opam,*.opam,*.opam.template setf opam
 
+" OpenFOAM
+au BufNewFile,BufRead [a-zA-Z0-9]*Dict\(.*\)\=,[a-zA-Z]*Properties\(.*\)\=,*Transport\(.*\),fvSchemes,fvSolution,fvConstrains,fvModels,*/constant/g,*/0\(\.orig\)\=/* call dist#ft#FTfoam()
+
 " OpenROAD
 au BufNewFile,BufRead *.or			setf openroad
 
@@ -1357,6 +1401,9 @@ au BufNewFile,BufRead *printcap
 au BufNewFile,BufRead *termcap
 	\ let b:ptcap_type = "term" | setf ptcap
 
+" Prisma
+au BufRead,BufNewFile *.prisma			setf prisma
+
 " PCCTS / ANTLR
 "au BufNewFile,BufRead *.g			setf antlr
 au BufNewFile,BufRead *.g			setf pccts
@@ -1364,6 +1411,9 @@ au BufNewFile,BufRead *.g			setf pccts
 " PPWizard
 au BufNewFile,BufRead *.it,*.ih			setf ppwiz
 
+" Pug
+au BufRead,BufNewFile *.pug			setf pug
+
 " Puppet
 au BufNewFile,BufRead Puppetfile		setf ruby
 
@@ -1429,6 +1479,9 @@ au BufNewFile,BufRead *.pyx,*.pxd		setf pyrex
 au BufNewFile,BufRead *.py,*.pyw,.pythonstartup,.pythonrc  setf python
 au BufNewFile,BufRead *.ptl,*.pyi,SConstruct		   setf python
 
+" QL
+au BufRead,BufNewFile *.ql,*.qll		setf ql
+
 " Radiance
 au BufNewFile,BufRead *.rad,*.mat		setf radiance
 
@@ -1668,7 +1721,7 @@ au BufNewFile,BufRead .zshrc,.zshenv,.zlogin,.zlogout,.zcompdump setf zsh
 au BufNewFile,BufRead *.zsh			setf zsh
 
 " Scheme
-au BufNewFile,BufRead *.scm,*.ss,*.rkt,*.rktd,*.rktl 	setf scheme
+au BufNewFile,BufRead *.scm,*.ss,*.sld,*.rkt,*.rktd,*.rktl 	setf scheme
 
 " Screen RC
 au BufNewFile,BufRead .screenrc,screenrc	setf screen
@@ -1777,8 +1830,8 @@ au BufNewFile,BufRead *.sqr,*.sqi		setf sqr
 au BufNewFile,BufRead *.nut			setf squirrel
 
 " OpenSSH configuration
-au BufNewFile,BufRead ssh_config,*/.ssh/config		setf sshconfig
-au BufNewFile,BufRead */etc/ssh/ssh_config.d/*.conf	setf sshconfig
+au BufNewFile,BufRead ssh_config,*/.ssh/config,*/.ssh/*.conf	setf sshconfig
+au BufNewFile,BufRead */etc/ssh/ssh_config.d/*.conf		setf sshconfig
 
 " OpenSSH server configuration
 au BufNewFile,BufRead sshd_config			setf sshdconfig
@@ -1833,6 +1886,9 @@ au BufNewFile,BufRead */etc/sudoers,sudoers.tmp	setf sudoers
 " SVG (Scalable Vector Graphics)
 au BufNewFile,BufRead *.svg			setf svg
 
+" Surface
+au BufRead,BufNewFile *.sface			setf surface
+
 " Tads (or Nroff or Perl test file)
 au BufNewFile,BufRead *.t
 	\ if !dist#ft#FTnroff() && !dist#ft#FTperl() | setf tads | endif
@@ -1850,6 +1906,9 @@ au BufRead,BufNewFile *.task			setf taskedit
 " Tcl (JACL too)
 au BufNewFile,BufRead *.tcl,*.tm,*.tk,*.itcl,*.itk,*.jacl,.tclshrc,.wishrc	setf tcl
 
+" Teal
+au BufRead,BufNewFile *.tl			setf teal
+
 " TealInfo
 au BufNewFile,BufRead *.tli			setf tli
 
@@ -1867,6 +1926,9 @@ au BufRead,BufNewFile *.ttl
 " Terminfo
 au BufNewFile,BufRead *.ti			setf terminfo
 
+" Terraform
+au BufRead,BufNewFile *.tfvars			setf terraform
+
 " TeX
 au BufNewFile,BufRead *.latex,*.sty,*.dtx,*.ltx,*.bbl	setf tex
 au BufNewFile,BufRead *.tex			call dist#ft#FTtex()
@@ -1886,6 +1948,9 @@ au BufNewFile,BufRead .tidyrc,tidyrc,tidy.conf	setf tidy
 " TF mud client
 au BufNewFile,BufRead *.tf,.tfrc,tfrc		setf tf
 
+" TLA+
+au BufRead,BufNewFile *.tla			setf tla
+
 " tmux configuration
 au BufNewFile,BufRead {.,}tmux*.conf		setf tmux
 
@@ -2144,6 +2209,9 @@ au BufNewFile,BufRead *.raml			setf raml
 " yum conf (close enough to dosini)
 au BufNewFile,BufRead */etc/yum.conf		setf dosini
 
+" YANG
+au BufRead,BufNewFile *.yang			setf yang
+
 " Zimbu
 au BufNewFile,BufRead *.zu			setf zimbu
 " Zimbu Templates
@@ -2238,6 +2306,9 @@ au BufNewFile,BufRead crontab,crontab.*,*/etc/cron.d/*		call s:StarSetf('crontab
 " dnsmasq(8) configuration
 au BufNewFile,BufRead */etc/dnsmasq.d/*		call s:StarSetf('dnsmasq')
 
+" Dockerfile
+au BufNewFile,BufRead Dockerfile.*,Containerfile.*	call s:StarSetf('dockerfile')
+
 " Dracula
 au BufNewFile,BufRead drac.*			call s:StarSetf('dracula')
 
@@ -2282,6 +2353,9 @@ au BufNewFile,BufRead Kconfig.*			call s:StarSetf('kconfig')
 " Lilo: Linux loader
 au BufNewFile,BufRead lilo.conf*		call s:StarSetf('lilo')
 
+" Libsensors
+au BufNewFile,BufRead */etc/sensors.d/[^.]*	call s:StarSetf('sensors')
+
 " Logcheck
 au BufNewFile,BufRead */etc/logcheck/*.d*/*	call s:StarSetf('logcheck')
 

runtime/ftplugin/git.vim

@@ -1,41 +0,0 @@
-" Vim filetype plugin
-" Language:	generic git output
-" Maintainer:	Tim Pope <vimNOSPAM@tpope.org>
-" Last Change:	2019 Dec 05
-
-" Only do this when not done yet for this buffer
-if (exists("b:did_ftplugin"))
-  finish
-endif
-let b:did_ftplugin = 1
-
-if !exists('b:git_dir')
-  if expand('%:p') =~# '[\/]\.git[\/]modules[\/]\|:[\/][\/]\|^\a\a\+:'
-    " Stay out of the way
-  elseif expand('%:p') =~# '[\/]\.git[\/]worktrees'
-    let b:git_dir = matchstr(expand('%:p'),'.*\.git[\/]worktrees[\/][^\/]\+\>')
-  elseif expand('%:p') =~# '\.git\>'
-    let b:git_dir = matchstr(expand('%:p'),'.*\.git\>')
-  elseif $GIT_DIR != ''
-    let b:git_dir = $GIT_DIR
-  endif
-  if (has('win32') || has('win64')) && exists('b:git_dir')
-    let b:git_dir = substitute(b:git_dir,'\\','/','g')
-  endif
-endif
-
-if exists('*shellescape') && exists('b:git_dir') && b:git_dir != ''
-  if b:git_dir =~# '/\.git$' " Not a bare repository
-    let &l:path = escape(fnamemodify(b:git_dir,':h'),'\, ').','.&l:path
-  endif
-  let &l:path = escape(b:git_dir,'\, ').','.&l:path
-  let &l:keywordprg = 'git --git-dir='.shellescape(b:git_dir).' show'
-else
-  setlocal keywordprg=git\ show
-endif
-if has('gui_running')
-  let &l:keywordprg = substitute(&l:keywordprg,'^git\>','git --no-pager','')
-endif
-
-setlocal includeexpr=substitute(v:fname,'^[^/]\\+/','','')
-let b:undo_ftplugin = "setl keywordprg< path< includeexpr<"

runtime/ftplugin/gitcommit.vim

@@ -1,66 +1,57 @@
 " Vim filetype plugin
 " Language:	git commit file
 " Maintainer:	Tim Pope <vimNOSPAM@tpope.org>
-" Last Change:	2019 Dec 05
+" Last Change:	2022 Jan 05
 
 " Only do this when not done yet for this buffer
 if (exists("b:did_ftplugin"))
   finish
 endif
 
-runtime! ftplugin/git.vim
 let b:did_ftplugin = 1
 
-setlocal comments=:# commentstring=#\ %s
 setlocal nomodeline tabstop=8 formatoptions+=tl textwidth=72
 setlocal formatoptions-=c formatoptions-=r formatoptions-=o formatoptions-=q formatoptions+=n
 setlocal formatlistpat+=\\\|^\\s*[-*+]\\s\\+
+setlocal include=^+++
+setlocal includeexpr=substitute(v:fname,'^[bi]/','','')
 
-let b:undo_ftplugin = 'setl modeline< tabstop< formatoptions< tw< com< cms< formatlistpat<'
+let b:undo_ftplugin = 'setl modeline< tabstop< formatoptions< tw< com< cms< formatlistpat< inc< inex<'
 
-if exists("g:no_gitcommit_commands") || v:version < 700
+let s:l = search('\C\m^[#;@!$%^&|:] -\{24,\} >8 -\{24,\}$', 'cnW', '', 100)
+let &l:comments = ':' . (matchstr(getline(s:l ? s:l : '$'), '^[#;@!$%^&|:]\S\@!') . '#')[0]
+let &l:commentstring = &l:comments[1] . ' %s'
+unlet s:l
+
+if exists("g:no_gitcommit_commands")
   finish
 endif
 
-if !exists("b:git_dir")
-  let b:git_dir = expand("%:p:h")
-endif
-
-command! -bang -bar -buffer -complete=custom,s:diffcomplete -nargs=* DiffGitCached :call s:gitdiffcached(<bang>0,b:git_dir,<f-args>)
+command! -bang -bar -buffer -complete=custom,s:diffcomplete -nargs=* DiffGitCached :call s:gitdiffcached(<bang>0, <f-args>)
 
 let b:undo_ftplugin = b:undo_ftplugin . "|delc DiffGitCached"
 
-function! s:diffcomplete(A,L,P)
+function! s:diffcomplete(A, L, P) abort
   let args = ""
   if a:P <= match(a:L." -- "," -- ")+3
     let args = args . "-p\n--stat\n--shortstat\n--summary\n--patch-with-stat\n--no-renames\n-B\n-M\n-C\n"
   end
-  if exists("b:git_dir") && a:A !~ '^-'
-    let tree = fnamemodify(b:git_dir,':h')
-    if strpart(getcwd(),0,strlen(tree)) == tree
-      let args = args."\n".system("git diff --cached --name-only")
-    endif
+  if a:A !~ '^-' && !empty(getftype('.git'))
+    let args = args."\n".system("git diff --cached --name-only")
   endif
   return args
 endfunction
 
-function! s:gitdiffcached(bang,gitdir,...)
-  let tree = fnamemodify(a:gitdir,':h')
+function! s:gitdiffcached(bang, ...) abort
   let name = tempname()
-  let git = "git"
-  if strpart(getcwd(),0,strlen(tree)) != tree
-    let git .= " --git-dir=".(exists("*shellescape") ? shellescape(a:gitdir) : '"'.a:gitdir.'"')
-  endif
   if a:0
-    let extra = join(map(copy(a:000),exists("*shellescape") ? 'shellescape(v:val)' : "'\"'.v:val.'\"'"))
+    let extra = join(map(copy(a:000), 'shellescape(v:val)'))
   else
     let extra = "-p --stat=".&columns
   endif
-  call system(git." diff --cached --no-color --no-ext-diff ".extra." > ".(exists("*shellescape") ? shellescape(name) : name))
-  exe "pedit ".(exists("*fnameescape") ? fnameescape(name) : name)
+  call system("git diff --cached --no-color --no-ext-diff ".extra." > ".shellescape(name))
+  exe "pedit " . fnameescape(name)
   wincmd P
-  let b:git_dir = a:gitdir
-  command! -bang -bar -buffer -complete=custom,s:diffcomplete -nargs=* DiffGitCached :call s:gitdiffcached(<bang>0,b:git_dir,<f-args>)
-  nnoremap <buffer> <silent> q :q<CR>
+  command! -bang -bar -buffer -complete=custom,s:diffcomplete -nargs=* DiffGitCached :call s:gitdiffcached(<bang>0, <f-args>)
   setlocal buftype=nowrite nobuflisted noswapfile nomodifiable filetype=git
 endfunction

runtime/ftplugin/gitrebase.vim

@@ -1,22 +1,20 @@
 " Vim filetype plugin
 " Language:	git rebase --interactive
 " Maintainer:	Tim Pope <vimNOSPAM@tpope.org>
-" Last Change:	2019 Dec 05
+" Last Change:	2022 Jan 05
 
 " Only do this when not done yet for this buffer
 if (exists("b:did_ftplugin"))
   finish
 endif
 
-runtime! ftplugin/git.vim
 let b:did_ftplugin = 1
 
-setlocal comments=:# commentstring=#\ %s formatoptions-=t
+let &l:comments = ':' . (matchstr(getline('$'), '^[#;@!$%^&|:]\S\@!') . '#')[0]
+let &l:commentstring = &l:comments[1] . ' %s'
+setlocal formatoptions-=t
 setlocal nomodeline
-if !exists("b:undo_ftplugin")
-  let b:undo_ftplugin = ""
-endif
-let b:undo_ftplugin = b:undo_ftplugin."|setl com< cms< fo< ml<"
+let b:undo_ftplugin = "setl com< cms< fo< ml<"
 
 function! s:choose(word) abort
   s/^\(\w\+\>\)\=\(\s*\)\ze\x\{4,40\}\>/\=(strlen(submatch(1)) == 1 ? a:word[0] : a:word) . substitute(submatch(2),'^$',' ','')/e
@@ -41,8 +39,7 @@ if exists("g:no_plugin_maps") || exists("g:no_gitrebase_maps")
   finish
 endif
 
-nnoremap <buffer> <expr> K col('.') < 7 && expand('<Lt>cword>') =~ '\X' && getline('.') =~ '^\w\+\s\+\x\+\>' ? 'wK' : 'K'
 nnoremap <buffer> <silent> <C-A> :<C-U><C-R>=v:count1<CR>Cycle<CR>
 nnoremap <buffer> <silent> <C-X> :<C-U><C-R>=v:count1<CR>Cycle!<CR>
 
-let b:undo_ftplugin = b:undo_ftplugin . "|exe 'nunmap <buffer> K'|exe 'nunmap <buffer> <C-A>'|exe 'nunmap <buffer> <C-X>'"
+let b:undo_ftplugin = b:undo_ftplugin . "|exe 'nunmap <buffer> <C-A>'|exe 'nunmap <buffer> <C-X>'"

runtime/gvim.desktop

@@ -4,6 +4,7 @@
 # Translators: This is the Application Name used in the GVim desktop file
 Name[de]=GVim
 Name[eo]=GVim
+Name[fi]=GVim
 Name[fr]=GVim
 Name[it]=GVim
 Name[ru]=GVim
@@ -13,6 +14,7 @@ Name=GVim
 # Translators: This is the Generic Application Name used in the Vim desktop file
 GenericName[de]=Texteditor
 GenericName[eo]=Tekstoredaktilo
+GenericName[fi]=Tekstinmuokkain
 GenericName[fr]=Éditeur de texte
 GenericName[it]=Editor di testi
 GenericName[ja]=テキストエディタ
@@ -23,6 +25,7 @@ GenericName=Text Editor
 # Translators: This is the comment used in the Vim desktop file
 Comment[de]=Textdateien bearbeiten
 Comment[eo]=Redakti tekstajn dosierojn
+Comment[fi]=Muokkaa tekstitiedostoja
 Comment[fr]=Éditer des fichiers texte
 Comment[it]=Edita file di testo
 Comment[ja]=テキストファイルを編集します
@@ -54,7 +57,6 @@ Comment[es]=Edita archivos de texto
 Comment[et]=Redigeeri tekstifaile
 Comment[eu]=Editatu testu-fitxategiak
 Comment[fa]=ویرایش پرونده‌های متنی
-Comment[fi]=Muokkaa tekstitiedostoja
 Comment[ga]=Eagar comhad Téacs
 Comment[gu]=લખાણ ફાઇલોમાં ફેરફાર કરો
 Comment[he]=ערוך קבצי טקסט
@@ -103,6 +105,7 @@ Type=Application
 # Translators: Search terms to find this application. Do NOT change the semicolons! The list MUST also end with a semicolon!
 Keywords[de]=Text;Editor;
 Keywords[eo]=Teksto;redaktilo;
+Keywords[fi]=Teksti;muokkain;editori;
 Keywords[fr]=Texte;éditeur;
 Keywords[it]=Testo;editor;
 Keywords[ja]=テキスト;エディタ;

runtime/pack/dist/opt/termdebug/plugin/termdebug.vim

@@ -2,7 +2,7 @@
 "
 " Author: Bram Moolenaar
 " Copyright: Vim license applies, see ":help license"
-" Last Change: 2021 Dec 16
+" Last Change: 2022 Jan 17
 "
 " WORK IN PROGRESS - Only the basics work
 " Note: On MS-Windows you need a recent version of gdb.  The one included with
@@ -147,7 +147,7 @@ func s:StartDebug_internal(dict)
     if &columns < g:termdebug_wide
       let s:save_columns = &columns
       let &columns = g:termdebug_wide
-      " If we make the Vim window wider, use the whole left halve for the debug
+      " If we make the Vim window wider, use the whole left half for the debug
       " windows.
       let s:allleft = 1
     endif
@@ -426,7 +426,7 @@ func s:StartDebug_prompt(dict)
     call s:SendCommand('set env COLORS = ' . &t_Co)
     call s:SendCommand('set env VIM_TERMINAL = ' . v:version)
   else
-    " TODO: open a new terminal get get the tty name, pass on to gdb
+    " TODO: open a new terminal, get the tty name, pass on to gdb
     call s:SendCommand('show inferior-tty')
   endif
   call s:SendCommand('set print pretty on')
@@ -1067,10 +1067,10 @@ func s:GetEvaluationExpression(range, arg)
   return expr
 endfunc
 
-" clean up expression that may got in because of range
+" clean up expression that may get in because of range
 " (newlines and surrounding whitespace)
 " As it can also be specified via ex-command for assignments this function
-" may not change the "content" parts (like replacing contained spaces
+" may not change the "content" parts (like replacing contained spaces)
 func s:CleanupExpr(expr)
   " replace all embedded newlines/tabs/...
   let expr = substitute(a:expr, '\_s', ' ', 'g')
@@ -1099,7 +1099,7 @@ func s:HandleEvaluate(msg)
     \ ->substitute('.*value="\(.*\)"', '\1', '')
     \ ->substitute('\\"', '"', 'g')
     \ ->substitute('\\\\', '\\', 'g')
-    "\ multi-byte characters arrive in octal form, replace everthing but NULL values
+    "\ multi-byte characters arrive in octal form, replace everything but NULL values
     \ ->substitute('\\000', s:NullRepl, 'g')
     \ ->substitute('\\\o\o\o', {-> eval('"' .. submatch(0) .. '"')}, 'g')
     "\ Note: GDB docs also mention hex encodings - the translations below work
@@ -1252,8 +1252,18 @@ func s:HandleCursor(msg)
   if a:msg =~ '^\(\*stopped\|=thread-selected\)' && filereadable(fname)
     let lnum = substitute(a:msg, '.*line="\([^"]*\)".*', '\1', '')
     if lnum =~ '^[0-9]*$'
-    call s:GotoSourcewinOrCreateIt()
+      call s:GotoSourcewinOrCreateIt()
       if expand('%:p') != fnamemodify(fname, ':p')
+echomsg 'different fname: "' .. expand('%:p') .. '" vs "' .. fnamemodify(fname, ':p') .. '"'
+	augroup Termdebug
+	  " Always open a file read-only instead of showing the ATTENTION
+	  " prompt, since we are unlikely to want to edit the file.
+	  " The file may be changed but not saved, warn for that.
+	  au SwapExists * echohl WarningMsg
+		\ | echo 'Warning: file is being edited elsewhere'
+		\ | echohl None
+		\ | let v:swapchoice = '0'
+	augroup END
 	if &modified
 	  " TODO: find existing window
 	  exe 'split ' . fnameescape(fname)
@@ -1262,6 +1272,9 @@ func s:HandleCursor(msg)
 	else
 	  exe 'edit ' . fnameescape(fname)
 	endif
+	augroup Termdebug
+	  au! SwapExists
+	augroup END
       endif
       exe lnum
       normal! zv

runtime/scripts.vim

@@ -384,7 +384,7 @@ else
     set ft=scheme
 
   " Git output
-  elseif s:line1 =~# '^\(commit\|tree\|object\) \x\{40\}\>\|^tag \S\+$'
+  elseif s:line1 =~# '^\(commit\|tree\|object\) \x\{40,\}\>\|^tag \S\+$'
     set ft=git
 
    " Gprof (gnu profiler)
@@ -406,6 +406,12 @@ else
   elseif s:line1 =~# '^#.*by RouterOS.*$'
     set ft=routeros
 
+  " Sed scripts
+  " #ncomment is allowed but most likely a false positive so require a space
+  " before any trailing comment text
+  elseif s:line1 =~# '^#n\%($\|\s\)'
+    set ft=sed
+
   " CVS diff
   else
     let s:lnum = 1

runtime/syntax/git.vim

@@ -1,7 +1,7 @@
 " Vim syntax file
 " Language:	generic git output
 " Maintainer:	Tim Pope <vimNOSPAM@tpope.org>
-" Last Change:	2019 Dec 05
+" Last Change:	2022 Jan 05
 
 if exists("b:current_syntax")
   finish
@@ -12,12 +12,28 @@ syn sync minlines=50
 
 syn include @gitDiff syntax/diff.vim
 
-syn region gitHead start=/\%^/ end=/^$/
-syn region gitHead start=/\%(^commit\%( \x\{40\}\)\{1,\}\%(\s*(.*)\)\=$\)\@=/ end=/^$/
-
-" For git reflog and git show ...^{tree}, avoid sync issues
-syn match gitHead /^\d\{6\} \%(\w\{4} \)\=\x\{40\}\%( [0-3]\)\=\t.*/
-syn match gitHead /^\x\{40\} \x\{40}\t.*/
+syn region gitHead start=/\%^\%(tag \|tree \|object \)\@=/ end=/^$/ contains=@NoSpell
+syn region gitHead start=/\%(^commit\%( \x\{4,\}\)\{1,\}\%(\s*(.*)\)\=$\)\@=/ end=/^$/ contains=@NoSpell
+" git log --oneline
+" minimize false positives by verifying contents of buffer
+if getline(1) =~# '^\x\{7,\} ' && getline('$') =~# '^\x\{7,\} '
+  syn match gitHashAbbrev /^\x\{7,\} \@=/ contains=@NoSpell
+elseif getline(1) =~#     '^[|\/\\_ ]\{-\}\*[|\/\\_ ]\{-\} \x\{7,\} '
+  syn match gitHashAbbrev /^[|\/\\_ ]\{-\}\*[|\/\\_ ]\{-\} \zs\x\{7,\} \@=/ contains=@NoSpell
+endif
+" git log --graph
+syn region gitGraph start=/\%(^[|\/\\_ ]*\*[|\/\\_ ]\{-\} commit\%( \x\{4,\}\)\{1,\}\%(\s*(.*)\)\=$\)\@=/ end=/^\%([|\/\\_ ]*$\)\@=/ contains=@NoSpell
+" git blame --porcelain
+syn region gitHead start=/\%(^\x\{40,\} \d\+ \d\+\%( \d\+\)\=$\)\@=/ end=/^\t\@=/ contains=@NoSpell
+" git ls-tree
+syn match  gitMode    /^\d\{6\}\%( \%(blob\|tree\) \x\{4,\}\t\)\@=/ nextgroup=gitType skipwhite contains=@NoSpell
+" git ls-files --stage
+syn match  gitMode    /^\d\{6\}\%( \x\{4,\} [0-3]\t\)\@=/ nextgroup=gitHashStage skipwhite contains=@NoSpell
+" .git/HEAD, .git/refs/
+syn match  gitKeyword /\%^ref: \@=/ nextgroup=gitReference skipwhite contains=@NoSpell
+syn match  gitHash /\%^\x\{40,}\%$/ skipwhite contains=@NoSpell
+" .git/logs/
+syn match  gitReflog /^\x\{40,\} \x\{40,\} .\{-\}\d\+\s-\d\{4\}\t.*/ skipwhite contains=@NoSpell,gitReflogOld
 
 syn region gitDiff start=/^\%(diff --git \)\@=/ end=/^\%(diff --\|$\)\@=/ contains=@gitDiff fold
 syn region gitDiff start=/^\%(@@ -\)\@=/ end=/^\%(diff --\%(git\|cc\|combined\) \|$\)\@=/ contains=@gitDiff
@@ -25,35 +41,47 @@ syn region gitDiff start=/^\%(@@ -\)\@=/ end=/^\%(diff --\%(git\|cc\|combined\)
 syn region gitDiffMerge start=/^\%(diff --\%(cc\|combined\) \)\@=/ end=/^\%(diff --\|$\)\@=/ contains=@gitDiff
 syn region gitDiffMerge start=/^\%(@@@@* -\)\@=/ end=/^\%(diff --\|$\)\@=/ contains=@gitDiff
 syn match gitDiffAdded "^ \++.*" contained containedin=gitDiffMerge
-syn match gitDiffAdded "{+.*+}" contained containedin=gitDiff
+syn match gitDiffAdded "{+[^}]*+}" contained containedin=gitDiff
 syn match gitDiffRemoved "^ \+-.*" contained containedin=gitDiffMerge
-syn match gitDiffRemoved "\[-.*-\]" contained containedin=gitDiff
+syn match gitDiffRemoved "\[-[^]]*-\]" contained containedin=gitDiff
 
-syn match  gitKeyword /^\%(object\|type\|tag\|commit\|tree\|parent\|encoding\)\>/ contained containedin=gitHead nextgroup=gitHash,gitType skipwhite
-syn match  gitKeyword /^\%(tag\>\|ref:\)/ contained containedin=gitHead nextgroup=gitReference skipwhite
-syn match  gitKeyword /^Merge:/  contained containedin=gitHead nextgroup=gitHashAbbrev skipwhite
-syn match  gitMode    /^\d\{6\}\>/ contained containedin=gitHead nextgroup=gitType,gitHash skipwhite
-syn match  gitIdentityKeyword /^\%(author\|committer\|tagger\)\>/ contained containedin=gitHead nextgroup=gitIdentity skipwhite
-syn match  gitIdentityHeader /^\%(Author\|Commit\|Tagger\):/ contained containedin=gitHead nextgroup=gitIdentity skipwhite
-syn match  gitDateHeader /^\%(AuthorDate\|CommitDate\|Date\):/ contained containedin=gitHead nextgroup=gitDate skipwhite
+syn match  gitKeyword /^commit \@=/ contained containedin=gitHead nextgroup=gitHashAbbrev skipwhite contains=@NoSpell
+syn match  gitKeyword /^\%(object\|tree\|parent\|encoding\|gpgsig\%(-\w\+\)\=\|previous\) \@=/ contained containedin=gitHead nextgroup=gitHash skipwhite contains=@NoSpell
+syn match  gitKeyword /^Merge:/  contained containedin=gitHead nextgroup=gitHashAbbrev skipwhite contains=@NoSpell
+syn match  gitIdentityKeyword /^\%(author\|committer\|tagger\) \@=/ contained containedin=gitHead nextgroup=gitIdentity skipwhite contains=@NoSpell
+syn match  gitIdentityHeader /^\%(Author\|Commit\|Tagger\):/ contained containedin=gitHead nextgroup=gitIdentity skipwhite contains=@NoSpell
+syn match  gitDateHeader /^\%(AuthorDate\|CommitDate\|Date\):/ contained containedin=gitHead nextgroup=gitDate skipwhite contains=@NoSpell
 
-syn match  gitReflogHeader /^Reflog:/ contained containedin=gitHead nextgroup=gitReflogMiddle skipwhite
-syn match  gitReflogHeader /^Reflog message:/ contained containedin=gitHead skipwhite
-syn match  gitReflogMiddle /\S\+@{\d\+} (/he=e-2 nextgroup=gitIdentity
+syn match  gitKeyword /^[*|\/\\_ ]\+\zscommit \@=/ contained containedin=gitGraph nextgroup=gitHashAbbrev skipwhite contains=@NoSpell
+syn match  gitKeyword /^[|\/\\_ ]\+\zs\%(object\|tree\|parent\|encoding\|gpgsig\%(-\w\+\)\=\|previous\) \@=/ contained containedin=gitGraph nextgroup=gitHash skipwhite contains=@NoSpell
+syn match  gitKeyword /^[|\/\\_ ]\+\zsMerge:/  contained containedin=gitGraph nextgroup=gitHashAbbrev skipwhite contains=@NoSpell
+syn match  gitIdentityKeyword /^[|\/\\_ ]\+\zs\%(author\|committer\|tagger\) \@=/ contained containedin=gitGraph nextgroup=gitIdentity skipwhite contains=@NoSpell
+syn match  gitIdentityHeader /^[|\/\\_ ]\+\zs\%(Author\|Commit\|Tagger\):/ contained containedin=gitGraph nextgroup=gitIdentity skipwhite contains=@NoSpell
+syn match  gitDateHeader /^[|\/\\_ ]\+\zs\%(AuthorDate\|CommitDate\|Date\):/ contained containedin=gitGraph nextgroup=gitDate skipwhite contains=@NoSpell
 
-syn match  gitDate      /\<\u\l\l \u\l\l \d\=\d \d\d:\d\d:\d\d \d\d\d\d [+-]\d\d\d\d/ contained
-syn match  gitDate      /-\=\d\+ [+-]\d\d\d\d\>/               contained
-syn match  gitDate      /\<\d\+ \l\+ ago\>/                    contained
-syn match  gitType      /\<\%(tag\|commit\|tree\|blob\)\>/     contained nextgroup=gitHash skipwhite
-syn match  gitStage     /\<\d\t\@=/                            contained
-syn match  gitReference /\S\+\S\@!/                            contained
-syn match  gitHash      /\<\x\{40\}\>/                         contained nextgroup=gitIdentity,gitStage,gitHash skipwhite
-syn match  gitHash      /^\<\x\{40\}\>/ containedin=gitHead contained nextgroup=gitHash skipwhite
-syn match  gitHashAbbrev /\<\x\{4,40\}\>/           contained nextgroup=gitHashAbbrev skipwhite
-syn match  gitHashAbbrev /\<\x\{4,39\}\.\.\./he=e-3 contained nextgroup=gitHashAbbrev skipwhite
+syn match  gitKeyword /^type \@=/ contained containedin=gitHead nextgroup=gitType skipwhite contains=@NoSpell
+syn match  gitKeyword /^\%(summary\|boundary\|filename\|\%(author\|committer\)-\%(time\|tz\)\) \@=/ contained containedin=gitHead skipwhite contains=@NoSpell
+syn match  gitKeyword /^tag \@=/ contained containedin=gitHead nextgroup=gitReference skipwhite contains=@NoSpell
+syn match  gitIdentityKeyword /^\%(author\|committer\)-mail \@=/ contained containedin=gitHead nextgroup=gitEmail skipwhite contains=@NoSpell
+syn match  gitReflogHeader /^Reflog:/ contained containedin=gitHead nextgroup=gitReflogMiddle skipwhite contains=@NoSpell
+syn match  gitReflogHeader /^Reflog message:/ contained containedin=gitHead skipwhite contains=@NoSpell
+syn match  gitReflogMiddle /\S\+@{\d\+} (/he=e-2 nextgroup=gitIdentity contains=@NoSpell
+
+syn match  gitIdentity /\S.\{-\} <[^>]*>/ contained nextgroup=gitDate skipwhite contains=@NoSpell
+syn region gitEmail matchgroup=gitEmailDelimiter start=/</ end=/>/ keepend oneline contained containedin=gitIdentity contains=@NoSpell
+syn match  gitDate      /\<\u\l\l \u\l\l \d\=\d \d\d:\d\d:\d\d \d\d\d\d [+-]\d\d\d\d/ contained contains=@NoSpell
+syn match  gitDate      /-\=\d\+ [+-]\d\d\d\d\>/               contained contains=@NoSpell
+syn match  gitDate      /\<\d\+ \l\+ ago\>/                    contained contains=@NoSpell
+syn match  gitType      /\<\%(tag\|commit\|tree\|blob\)\>/     contained nextgroup=gitHashAbbrev skipwhite contains=@NoSpell
+syn match  gitReference /\S\+\S\@!/                            contained contains=@NoSpell
+syn match  gitHash      /\<\x\{40,\}\>/             contained nextgroup=gitIdentity,gitHash skipwhite contains=@NoSpell
+syn match  gitReflogOld /^\x\{40,\} \@=/            contained nextgroup=gitReflogNew skipwhite contains=@NoSpell
+syn match  gitReflogNew /\<\x\{40,\} \@=/           contained nextgroup=gitIdentity skipwhite contains=@NoSpell
+syn match  gitHashAbbrev /\<\x\{4,\}\>/             contained nextgroup=gitHashAbbrev skipwhite contains=@NoSpell
+syn match  gitHashAbbrev /\<\x\{4,39\}\.\.\./he=e-3 contained nextgroup=gitHashAbbrev skipwhite contains=@NoSpell
+syn match  gitHashStage /\<\x\{4,\}\>/              contained nextgroup=gitStage skipwhite contains=@NoSpell
+syn match  gitStage     /\<\d\t\@=/                 contained contains=@NoSpell
 
-syn match  gitIdentity /\S.\{-\} <[^>]*>/ contained nextgroup=gitDate skipwhite
-syn region gitEmail matchgroup=gitEmailDelimiter start=/</ end=/>/ keepend oneline contained containedin=gitIdentity
 
 syn match  gitNotesHeader /^Notes:\ze\n    /
 
@@ -68,7 +96,10 @@ hi def link gitEmailDelimiter    Delimiter
 hi def link gitEmail             Special
 hi def link gitDate              Number
 hi def link gitMode              Number
+hi def link gitHashStage         gitHash
 hi def link gitHashAbbrev        gitHash
+hi def link gitReflogOld         gitHash
+hi def link gitReflogNew         gitHash
 hi def link gitHash              Identifier
 hi def link gitReflogMiddle      gitReference
 hi def link gitReference         Function

runtime/syntax/gitcommit.vim

@@ -2,71 +2,87 @@
 " Language:	git commit file
 " Maintainer:	Tim Pope <vimNOSPAM@tpope.org>
 " Filenames:	*.git/COMMIT_EDITMSG
-" Last Change:	2019 Dec 05
+" Last Change:	2022 Jan 05
 
 if exists("b:current_syntax")
   finish
 endif
 
+scriptencoding utf-8
+
 syn case match
 syn sync minlines=50
+syn sync linebreaks=1
 
 if has("spell")
   syn spell toplevel
 endif
 
 syn include @gitcommitDiff syntax/diff.vim
-syn region gitcommitDiff start=/\%(^diff --\%(git\|cc\|combined\) \)\@=/ end=/^\%(diff --\|$\|#\)\@=/ fold contains=@gitcommitDiff
+syn region gitcommitDiff start=/\%(^diff --\%(git\|cc\|combined\) \)\@=/ end=/^\%(diff --\|$\|@@\@!\|[^[:alnum:]\ +-]\S\@!\)\@=/ fold contains=@gitcommitDiff
 
 syn match   gitcommitSummary	"^.*\%<51v." contained containedin=gitcommitFirstLine nextgroup=gitcommitOverflow contains=@Spell
 syn match   gitcommitOverflow	".*" contained contains=@Spell
-syn match   gitcommitBlank	"^[^#].*" contained contains=@Spell
+syn match   gitcommitBlank	"^.\+" contained contains=@Spell
+syn match   gitcommitFirstLine	"\%^.*" nextgroup=gitcommitBlank,gitcommitComment skipnl
 
-if get(g:, "gitcommit_cleanup") is# "scissors"
-  syn match gitcommitFirstLine	"\%^.*" nextgroup=gitcommitBlank skipnl
-  syn region gitcommitComment start=/^# -\+ >8 -\+$/ end=/\%$/ contains=gitcommitDiff
-else
-  syn match gitcommitFirstLine	"\%^[^#].*" nextgroup=gitcommitBlank skipnl
-  syn match gitcommitComment	"^#.*"
+let s:scissors = 0
+let s:l = search('^[#;@!$%^&|:] -\{24,\} >8 -\{24,\}$', 'cnW', '', 100)
+if s:l == 0
+  let s:l = line('$')
+elseif getline(s:l)[0] !=# getline(s:l - 1)[0]
+  let s:scissors = 1
 endif
+let s:comment = escape((matchstr(getline(s:l), '^[#;@!$%^&|:]\S\@!') . '#')[0], '^$.*[]~\"/')
 
-syn match   gitcommitHead	"^\%(#   .*\n\)\+#$" contained transparent
-syn match   gitcommitOnBranch	"\%(^# \)\@<=On branch" contained containedin=gitcommitComment nextgroup=gitcommitBranch skipwhite
-syn match   gitcommitOnBranch	"\%(^# \)\@<=Your branch .\{-\} '" contained containedin=gitcommitComment nextgroup=gitcommitBranch skipwhite
+if s:scissors
+  let s:comment .= ' -\{24,\} >8 -\{24,\}$'
+  exe 'syn region gitcommitComment start="^' . s:comment . '" end="\%$" contains=gitcommitDiff'
+else
+  exe 'syn match gitcommitComment "^' . s:comment . '.*"'
+endif
+exe 'syn match   gitcommitTrailers "\n\@<=\n\%([[:alnum:]-]\+\s*:.*\|(cherry picked from commit .*\)\%(\n\s.*\|\n[[:alnum:]-]\+\s*:.*\|\n(cherry picked from commit .*\)*\%(\n\n*\%(' . s:comment . '\)\|\n*\%$\)\@="'
+
+unlet s:l s:comment s:scissors
+
+syn match   gitcommitTrailerToken "^[[:alnum:]-]\+\s*:" contained containedin=gitcommitTrailers
+
+syn match   gitcommitHash	"\<\x\{40,}\>" contains=@NoSpell display
+syn match   gitcommitOnBranch	"\%(^. \)\@<=On branch" contained containedin=gitcommitComment nextgroup=gitcommitBranch skipwhite
+syn match   gitcommitOnBranch	"\%(^. \)\@<=Your branch .\{-\} '" contained containedin=gitcommitComment nextgroup=gitcommitBranch skipwhite
 syn match   gitcommitBranch	"[^ ']\+" contained
-syn match   gitcommitNoBranch	"\%(^# \)\@<=Not currently on any branch." contained containedin=gitcommitComment
-syn match   gitcommitHeader	"\%(^# \)\@<=.*:$"	contained containedin=gitcommitComment
-syn region  gitcommitAuthor	matchgroup=gitCommitHeader start=/\%(^# \)\@<=\%(Author\|Committer\):/ end=/$/ keepend oneline contained containedin=gitcommitComment transparent
-syn match   gitcommitNoChanges	"\%(^# \)\@<=No changes$" contained containedin=gitcommitComment
+syn match   gitcommitNoBranch	"\%(^. \)\@<=Not currently on any branch." contained containedin=gitcommitComment
+syn match   gitcommitHeader	"\%(^. \)\@<=\S.*[:：]\%(\n^$\)\@!$" contained containedin=gitcommitComment
+syn region  gitcommitAuthor	matchgroup=gitCommitHeader start=/\%(^. \)\@<=\%(Author\|Committer\|Date\):/ end=/$/ keepend oneline contained containedin=gitcommitComment transparent
+syn match   gitcommitHeader	"\%(^. \)\@<=commit\%( \x\{40,\}$\)\@=" contained containedin=gitcommitComment nextgroup=gitcommitHash skipwhite
+syn match   gitcommitNoChanges	"\%(^. \)\@<=No changes$" contained containedin=gitcommitComment
 
-syn region  gitcommitUntracked	start=/^# Untracked files:/ end=/^#$\|^#\@!/ contains=gitcommitHeader,gitcommitHead,gitcommitUntrackedFile fold
-syn match   gitcommitUntrackedFile  "\t\@<=.*"	contained
+syn match   gitcommitType		"\%(^.\t\)\@<=[^[:punct:][:space:]][^/:：]*[^[:punct:][:space:]][:：]\ze "he=e-1 contained containedin=gitcommitComment nextgroup=gitcommitFile skipwhite
+syn match   gitcommitFile		".\{-\}\%($\| -> \)\@=" contained nextgroup=gitcommitArrow
+syn match   gitcommitArrow		" -> " contained nextgroup=gitcommitFile
+syn match   gitcommitUntrackedFile	"\%(^.\t\)\@<=[^:：/]*\%(/.*\)\=$" contained containedin=gitcommitComment
 
-syn region  gitcommitDiscarded	start=/^# Change\%(s not staged for commit\|d but not updated\):/ end=/^#$\|^#\@!/ contains=gitcommitHeader,gitcommitHead,gitcommitDiscardedType fold
-syn region  gitcommitSelected	start=/^# Changes to be committed:/ end=/^#$\|^#\@!/ contains=gitcommitHeader,gitcommitHead,gitcommitSelectedType fold
-syn region  gitcommitUnmerged	start=/^# Unmerged paths:/ end=/^#$\|^#\@!/ contains=gitcommitHeader,gitcommitHead,gitcommitUnmergedType fold
+syn region  gitcommitUntracked	start=/^\z(.\) Untracked files:$/ end=/^\z1\=$\|^\z1\@!/ contains=gitcommitHeader containedin=gitcommitComment containedin=gitcommitComment contained transparent fold
+syn region  gitcommitDiscarded	start=/^\z(.\) Change\%(s not staged for commit\|d but not updated\):$/ end=/^\z1\=$\|^\z1\@!/ contains=gitcommitHeader,gitcommitDiscardedType containedin=gitcommitComment containedin=gitcommitComment contained transparent fold
+syn region  gitcommitSelected	start=/^\z(.\) Changes to be committed:$/ end=/^\z1$\|^\z1\@!/ contains=gitcommitHeader,gitcommitSelectedType containedin=gitcommitComment containedin=gitcommitComment contained transparent fold
+syn region  gitcommitUnmerged	start=/^\z(.\) Unmerged paths:$/ end=/^\z1\=$\|^\z1\@!/ contains=gitcommitHeader,gitcommitUnmergedType containedin=gitcommitComment containedin=gitcommitComment contained transparent fold
 
+syn match   gitcommitUntrackedFile	"\%(^.\t\)\@<=.*" contained containedin=gitcommitUntracked
 
-syn match   gitcommitDiscardedType	"\t\@<=[[:lower:]][^:]*[[:lower:]]: "he=e-2	contained containedin=gitcommitComment nextgroup=gitcommitDiscardedFile skipwhite
-syn match   gitcommitSelectedType	"\t\@<=[[:lower:]][^:]*[[:lower:]]: "he=e-2	contained containedin=gitcommitComment nextgroup=gitcommitSelectedFile skipwhite
-syn match   gitcommitUnmergedType	"\t\@<=[[:lower:]][^:]*[[:lower:]]: "he=e-2	contained containedin=gitcommitComment nextgroup=gitcommitUnmergedFile skipwhite
-syn match   gitcommitDiscardedFile	".\{-\}\%($\| -> \)\@=" contained nextgroup=gitcommitDiscardedArrow
-syn match   gitcommitSelectedFile	".\{-\}\%($\| -> \)\@=" contained nextgroup=gitcommitSelectedArrow
-syn match   gitcommitUnmergedFile	".\{-\}\%($\| -> \)\@=" contained nextgroup=gitcommitSelectedArrow
+syn match   gitcommitDiscardedType	"\%(^.\t\)\@<=[^[:punct:][:space:]][^/:：]*[^[:punct:][:space:]][:：]\ze "he=e-1 contained nextgroup=gitcommitDiscardedFile skipwhite
+syn match   gitcommitSelectedType	"\%(^.\t\)\@<=[^[:punct:][:space:]][^/:：]*[^[:punct:][:space:]][:：]\ze "he=e-1 contained nextgroup=gitcommitSelectedFile skipwhite
+syn match   gitcommitUnmergedType	"\%(^.\t\)\@<=[^[:punct:][:space:]][^/:：]*[^[:punct:][:space:]][:：]\ze "he=e-1 contained nextgroup=gitcommitUnmergedFile skipwhite
+syn match   gitcommitDiscardedFile	"\S.\{-\}\%($\| -> \)\@=" contained nextgroup=gitcommitDiscardedArrow
+syn match   gitcommitSelectedFile	"\S.\{-\}\%($\| -> \)\@=" contained nextgroup=gitcommitSelectedArrow
+syn match   gitcommitUnmergedFile	"\S.\{-\}\%($\| -> \)\@=" contained nextgroup=gitcommitUnmergedArrow
 syn match   gitcommitDiscardedArrow	" -> " contained nextgroup=gitcommitDiscardedFile
 syn match   gitcommitSelectedArrow	" -> " contained nextgroup=gitcommitSelectedFile
-syn match   gitcommitUnmergedArrow	" -> " contained nextgroup=gitcommitSelectedFile
-
-syn match   gitcommitWarning		"\%^[^#].*: needs merge$" nextgroup=gitcommitWarning skipnl
-syn match   gitcommitWarning		"^[^#].*: needs merge$" nextgroup=gitcommitWarning skipnl contained
-syn match   gitcommitWarning		"^\%(no changes added to commit\|nothing \%(added \)\=to commit\)\>.*\%$"
+syn match   gitcommitUnmergedArrow	" -> " contained nextgroup=gitcommitUnmergedFile
 
 hi def link gitcommitSummary		Keyword
+hi def link gitcommitTrailerToken	Label
 hi def link gitcommitComment		Comment
-hi def link gitcommitUntracked		gitcommitComment
-hi def link gitcommitDiscarded		gitcommitComment
-hi def link gitcommitSelected		gitcommitComment
-hi def link gitcommitUnmerged		gitcommitComment
+hi def link gitcommitHash		Identifier
 hi def link gitcommitOnBranch		Comment
 hi def link gitcommitBranch		Special
 hi def link gitcommitNoBranch		gitCommitBranch

runtime/syntax/gitrebase.vim

@@ -2,7 +2,7 @@
 " Language:	git rebase --interactive
 " Maintainer:	Tim Pope <vimNOSPAM@tpope.org>
 " Filenames:	git-rebase-todo
-" Last Change:	2019 Dec 06
+" Last Change:	2022 Jan 05
 
 if exists("b:current_syntax")
   finish
@@ -10,8 +10,10 @@ endif
 
 syn case match
 
-syn match   gitrebaseHash   "\v<\x{7,}>"                               contained
-syn match   gitrebaseCommit "\v<\x{7,}>"    nextgroup=gitrebaseSummary skipwhite
+let s:c = escape((matchstr(getline('$'), '^[#;@!$%^&|:]\S\@!') . '#')[0], '^$.*[]~\"/')
+
+syn match   gitrebaseHash   "\v<\x{7,}>"                               contained contains=@NoSpell
+syn match   gitrebaseCommit "\v<\x{7,}>"    nextgroup=gitrebaseSummary skipwhite contains=@NoSpell
 syn match   gitrebasePick   "\v^p%(ick)=>"   nextgroup=gitrebaseCommit skipwhite
 syn match   gitrebaseReword "\v^r%(eword)=>" nextgroup=gitrebaseCommit skipwhite
 syn match   gitrebaseEdit   "\v^e%(dit)=>"   nextgroup=gitrebaseCommit skipwhite
@@ -26,12 +28,15 @@ syn match   gitrebaseLabel  "\v^l(abel)=>"   nextgroup=gitrebaseName skipwhite
 syn match   gitrebaseReset  "\v^(t|reset)=>" nextgroup=gitrebaseName skipwhite
 syn match   gitrebaseSummary ".*"               contains=gitrebaseHash contained
 syn match   gitrebaseCommand ".*"                                      contained
-syn match   gitrebaseComment "^\s*#.*"             contains=gitrebaseHash
+exe 'syn match gitrebaseComment " \@<=' . s:c . ' empty$" containedin=gitrebaseSummary contained'
+exe 'syn match gitrebaseComment "^\s*' . s:c . '.*" contains=gitrebaseHash'
 syn match   gitrebaseSquashError "\v%^%(s%(quash)=>|f%(ixup)=>)" nextgroup=gitrebaseCommit skipwhite
 syn match   gitrebaseMergeOption "\v-[Cc]>"  nextgroup=gitrebaseMergeCommit skipwhite contained
 syn match   gitrebaseMergeCommit "\v<\x{7,}>"  nextgroup=gitrebaseName skipwhite contained
 syn match   gitrebaseName        "\v[^[:space:].*?i:^~/-]\S+" nextgroup=gitrebaseMergeComment skipwhite contained
-syn match   gitrebaseMergeComment "#"  nextgroup=gitrebaseSummary skipwhite contained
+exe 'syn match gitrebaseMergeComment "' . s:c . '"  nextgroup=gitrebaseSummary skipwhite contained'
+
+unlet s:c
 
 hi def link gitrebaseCommit         gitrebaseHash
 hi def link gitrebaseHash           Identifier

runtime/syntax/i3config.vim

@@ -1,8 +1,9 @@
 " Vim syntax file
 " Language: i3 config file
-" Maintainer: Mohamed Boughaba <mohamed dot bgb at gmail dot com>
+" Original Author: Mohamed Boughaba <mohamed dot bgb at gmail dot com>
+" Maintainer: Quentin Hibon (github user hiqua)
 " Version: 0.4
-" Last Change: 2021 Dec 14
+" Last Change: 2022 Jan 15
 
 " References:
 " http://i3wm.org/docs/userguide.html#configuring
@@ -174,7 +175,7 @@ syn keyword i3ConfigDrawingMarksKeyword show_marks contained
 syn match i3ConfigDrawingMarks /^\s*show_marks\s\+\(yes\|no\)\s\?$/ contains=i3ConfigFocusWrappingType,i3ConfigDrawingMarksKeyword
 
 " Group mode/bar
-syn keyword i3ConfigBlockKeyword mode bar colors i3bar_command status_command position exec mode hidden_state modifier id position output background statusline tray_output tray_padding separator separator_symbol workspace_buttons strip_workspace_numbers binding_mode_indicator focused_workspace active_workspace inactive_workspace urgent_workspace binding_mode contained
+syn keyword i3ConfigBlockKeyword mode bar colors i3bar_command status_command position exec mode hidden_state modifier id position output background statusline tray_output tray_padding separator separator_symbol workspace_min_width workspace_buttons strip_workspace_numbers binding_mode_indicator focused_workspace active_workspace inactive_workspace urgent_workspace binding_mode contained
 syn region i3ConfigBlock start=+.*s\?{$+ end=+^}$+ contains=i3ConfigBlockKeyword,i3ConfigString,i3ConfigBind,i3ConfigComment,i3ConfigFont,i3ConfigFocusWrappingType,i3ConfigColor,i3ConfigVariable transparent keepend extend
 
 " Line continuation

runtime/syntax/rc.vim

@@ -1,7 +1,7 @@
 " Vim syntax file
 " Language:	M$ Resource files (*.rc)
 " Maintainer:	Christian Brabandt
-" Last Change:	2015-05-29
+" Last Change:	20220116
 " Repository:   https://github.com/chrisbra/vim-rc-syntax
 " License:	Vim (see :h license)
 " Previous Maintainer:	Heiko Erhardt <Heiko.Erhardt@munich.netsurf.de>
@@ -173,16 +173,17 @@ hi def link rcAttribute	rcCommonAttribute
 hi def link rcStdId	rcStatement
 hi def link rcStatement	Statement
 
-" Default color overrides
-hi def rcLanguage	term=reverse ctermbg=Red ctermfg=Yellow guibg=Red guifg=Yellow
-hi def rcMainObject	term=underline ctermfg=Blue guifg=Blue
-hi def rcSubObject	ctermfg=Green guifg=Green
-hi def rcCaptionParam	term=underline ctermfg=DarkGreen guifg=Green
-hi def rcParam	ctermfg=DarkGreen guifg=DarkGreen
-hi def rcStatement	ctermfg=DarkGreen guifg=DarkGreen
-hi def rcCommonAttribute	ctermfg=Brown guifg=Brown
+hi def link rcLanguage	Constant
+hi def link rcCaptionParam Constant
+hi def link rcCommonAttribute Constant
+
+hi def link rcMainObject Identifier
+hi def link rcSubObject	Define
+hi def link rcParam	Constant
+hi def link rcStatement	Statement
+"
+"hi def link rcIdentifier Identifier
 
-"hi def link rcIdentifier	Identifier
 
 
 let b:current_syntax = "rc"

runtime/syntax/scala.vim

@@ -3,7 +3,7 @@
 " Maintainer:           Derek Wyatt
 " URL:                  https://github.com/derekwyatt/vim-scala
 " License:              Same as Vim
-" Last Change:          23 August 2021
+" Last Change:          23 January 2022
 " ----------------------------------------------------------------------------
 
 if !exists('main_syntax')
@@ -43,55 +43,55 @@ syn keyword scalaKeyword class trait object extends with nextgroup=scalaInstance
 syn keyword scalaKeyword case nextgroup=scalaKeyword,scalaCaseFollowing skipwhite
 syn keyword scalaKeyword val nextgroup=scalaNameDefinition,scalaQuasiQuotes skipwhite
 syn keyword scalaKeyword def var nextgroup=scalaNameDefinition skipwhite
-hi link scalaKeyword Keyword
+hi def link scalaKeyword Keyword
 
 exe 'syn region scalaBlock start=/{/ end=/}/ contains=' . s:ContainedGroup() . ' fold'
 
 syn keyword scalaAkkaSpecialWord when goto using startWith initialize onTransition stay become unbecome
-hi link scalaAkkaSpecialWord PreProc
+hi def link scalaAkkaSpecialWord PreProc
 
 syn keyword scalatestSpecialWord shouldBe
 syn match scalatestShouldDSLA /^\s\+\zsit should/
 syn match scalatestShouldDSLB /\<should\>/
-hi link scalatestSpecialWord PreProc
-hi link scalatestShouldDSLA PreProc
-hi link scalatestShouldDSLB PreProc
+hi def link scalatestSpecialWord PreProc
+hi def link scalatestShouldDSLA PreProc
+hi def link scalatestShouldDSLB PreProc
 
 syn match scalaSymbol /'[_A-Za-z0-9$]\+/
-hi link scalaSymbol Number
+hi def link scalaSymbol Number
 
 syn match scalaChar /'.'/
 syn match scalaChar /'\\[\\"'ntbrf]'/ contains=scalaEscapedChar
 syn match scalaChar /'\\u[A-Fa-f0-9]\{4}'/ contains=scalaUnicodeChar
 syn match scalaEscapedChar /\\[\\"'ntbrf]/
 syn match scalaUnicodeChar /\\u[A-Fa-f0-9]\{4}/
-hi link scalaChar Character
-hi link scalaEscapedChar Special
-hi link scalaUnicodeChar Special
+hi def link scalaChar Character
+hi def link scalaEscapedChar Special
+hi def link scalaUnicodeChar Special
 
 syn match scalaOperator "||"
 syn match scalaOperator "&&"
 syn match scalaOperator "|"
 syn match scalaOperator "&"
-hi link scalaOperator Special
+hi def link scalaOperator Special
 
 syn match scalaNameDefinition /\<[_A-Za-z0-9$]\+\>/ contained nextgroup=scalaPostNameDefinition,scalaVariableDeclarationList
 syn match scalaNameDefinition /`[^`]\+`/ contained nextgroup=scalaPostNameDefinition
 syn match scalaVariableDeclarationList /\s*,\s*/ contained nextgroup=scalaNameDefinition
 syn match scalaPostNameDefinition /\_s*:\_s*/ contained nextgroup=scalaTypeDeclaration
-hi link scalaNameDefinition Function
+hi def link scalaNameDefinition Function
 
 syn match scalaInstanceDeclaration /\<[_\.A-Za-z0-9$]\+\>/ contained nextgroup=scalaInstanceHash
 syn match scalaInstanceDeclaration /`[^`]\+`/ contained
 syn match scalaInstanceHash /#/ contained nextgroup=scalaInstanceDeclaration
-hi link scalaInstanceDeclaration Special
-hi link scalaInstanceHash Type
+hi def link scalaInstanceDeclaration Special
+hi def link scalaInstanceHash Type
 
 syn match scalaUnimplemented /???/
-hi link scalaUnimplemented ERROR
+hi def link scalaUnimplemented ERROR
 
 syn match scalaCapitalWord /\<[A-Z][A-Za-z0-9$]*\>/
-hi link scalaCapitalWord Special
+hi def link scalaCapitalWord Special
 
 " Handle type declarations specially
 syn region scalaTypeStatement matchgroup=Keyword start=/\<type\_s\+\ze/ end=/$/ contains=scalaTypeTypeDeclaration,scalaSquareBrackets,scalaTypeTypeEquals,scalaTypeStatement
@@ -105,18 +105,18 @@ syn match scalaTypeTypeEquals /=\ze[^>]/ contained nextgroup=scalaTypeTypePostDe
 syn match scalaTypeTypeExtension /)\?\_s*\zs\%(⇒\|=>\|<:\|:>\|=:=\|::\|#\)/ contained contains=scalaTypeOperator nextgroup=scalaTypeTypeDeclaration skipwhite
 syn match scalaTypeTypePostDeclaration /\<[_\.A-Za-z0-9$]\+\>/ contained nextgroup=scalaTypeTypePostExtension skipwhite
 syn match scalaTypeTypePostExtension /\%(⇒\|=>\|<:\|:>\|=:=\|::\)/ contained contains=scalaTypeOperator nextgroup=scalaTypeTypePostDeclaration skipwhite
-hi link scalaTypeTypeDeclaration Type
-hi link scalaTypeTypeExtension Keyword
-hi link scalaTypeTypePostDeclaration Special
-hi link scalaTypeTypePostExtension Keyword
+hi def link scalaTypeTypeDeclaration Type
+hi def link scalaTypeTypeExtension Keyword
+hi def link scalaTypeTypePostDeclaration Special
+hi def link scalaTypeTypePostExtension Keyword
 
 syn match scalaTypeDeclaration /(/ contained nextgroup=scalaTypeExtension contains=scalaRoundBrackets skipwhite
 syn match scalaTypeDeclaration /\%(⇒\|=>\)\ze/ contained nextgroup=scalaTypeDeclaration contains=scalaTypeExtension skipwhite
 syn match scalaTypeDeclaration /\<[_\.A-Za-z0-9$]\+\>/ contained nextgroup=scalaTypeExtension skipwhite
 syn match scalaTypeExtension /)\?\_s*\zs\%(⇒\|=>\|<:\|:>\|=:=\|::\|#\)/ contained contains=scalaTypeOperator nextgroup=scalaTypeDeclaration skipwhite
-hi link scalaTypeDeclaration Type
-hi link scalaTypeExtension Keyword
-hi link scalaTypePostExtension Keyword
+hi def link scalaTypeDeclaration Type
+hi def link scalaTypeExtension Keyword
+hi def link scalaTypePostExtension Keyword
 
 syn match scalaTypeAnnotation /\%([_a-zA-Z0-9$\s]:\_s*\)\ze[_=(\.A-Za-z0-9$]\+/ skipwhite nextgroup=scalaTypeDeclaration contains=scalaRoundBrackets
 syn match scalaTypeAnnotation /)\_s*:\_s*\ze[_=(\.A-Za-z0-9$]\+/ skipwhite nextgroup=scalaTypeDeclaration
@@ -124,51 +124,51 @@ hi clear scalaTypeAnnotation
 
 syn match scalaCaseFollowing /\<[_\.A-Za-z0-9$]\+\>/ contained contains=scalaCapitalWord
 syn match scalaCaseFollowing /`[^`]\+`/ contained contains=scalaCapitalWord
-hi link scalaCaseFollowing Special
+hi def link scalaCaseFollowing Special
 
 syn keyword scalaKeywordModifier abstract override final lazy implicit private protected sealed null super
 syn keyword scalaSpecialFunction implicitly require
-hi link scalaKeywordModifier Function
-hi link scalaSpecialFunction Function
+hi def link scalaKeywordModifier Function
+hi def link scalaSpecialFunction Function
 
 syn keyword scalaSpecial this true false ne eq
 syn keyword scalaSpecial new nextgroup=scalaInstanceDeclaration skipwhite
 syn match scalaSpecial "\%(=>\|⇒\|<-\|←\|->\|→\)"
 syn match scalaSpecial /`[^`]\+`/  " Backtick literals
-hi link scalaSpecial PreProc
+hi def link scalaSpecial PreProc
 
 syn keyword scalaExternal package import
-hi link scalaExternal Include
+hi def link scalaExternal Include
 
 syn match scalaStringEmbeddedQuote /\\"/ contained
 syn region scalaString start=/"/ end=/"/ contains=scalaStringEmbeddedQuote,scalaEscapedChar,scalaUnicodeChar
-hi link scalaString String
-hi link scalaStringEmbeddedQuote String
+hi def link scalaString String
+hi def link scalaStringEmbeddedQuote String
 
 syn region scalaIString matchgroup=scalaInterpolationBrackets start=/\<[a-zA-Z][a-zA-Z0-9_]*"/ skip=/\\"/ end=/"/ contains=scalaInterpolation,scalaInterpolationB,scalaEscapedChar,scalaUnicodeChar
 syn region scalaTripleIString matchgroup=scalaInterpolationBrackets start=/\<[a-zA-Z][a-zA-Z0-9_]*"""/ end=/"""\ze\%([^"]\|$\)/ contains=scalaInterpolation,scalaInterpolationB,scalaEscapedChar,scalaUnicodeChar
-hi link scalaIString String
-hi link scalaTripleIString String
+hi def link scalaIString String
+hi def link scalaTripleIString String
 
 syn match scalaInterpolation /\$[a-zA-Z0-9_$]\+/ contained
 exe 'syn region scalaInterpolationB matchgroup=scalaInterpolationBoundary start=/\${/ end=/}/ contained contains=' . s:ContainedGroup()
-hi link scalaInterpolation Function
+hi def link scalaInterpolation Function
 hi clear scalaInterpolationB
 
 syn region scalaFString matchgroup=scalaInterpolationBrackets start=/f"/ skip=/\\"/ end=/"/ contains=scalaFInterpolation,scalaFInterpolationB,scalaEscapedChar,scalaUnicodeChar
 syn match scalaFInterpolation /\$[a-zA-Z0-9_$]\+\(%[-A-Za-z0-9\.]\+\)\?/ contained
 exe 'syn region scalaFInterpolationB matchgroup=scalaInterpolationBoundary start=/${/ end=/}\(%[-A-Za-z0-9\.]\+\)\?/ contained contains=' . s:ContainedGroup()
-hi link scalaFString String
-hi link scalaFInterpolation Function
+hi def link scalaFString String
+hi def link scalaFInterpolation Function
 hi clear scalaFInterpolationB
 
 syn region scalaTripleString start=/"""/ end=/"""\%([^"]\|$\)/ contains=scalaEscapedChar,scalaUnicodeChar
 syn region scalaTripleFString matchgroup=scalaInterpolationBrackets start=/f"""/ end=/"""\%([^"]\|$\)/ contains=scalaFInterpolation,scalaFInterpolationB,scalaEscapedChar,scalaUnicodeChar
-hi link scalaTripleString String
-hi link scalaTripleFString String
+hi def link scalaTripleString String
+hi def link scalaTripleFString String
 
-hi link scalaInterpolationBrackets Special
-hi link scalaInterpolationBoundary Function
+hi def link scalaInterpolationBrackets Special
+hi def link scalaInterpolationBoundary Function
 
 syn match scalaNumber /\<0[dDfFlL]\?\>/ " Just a bare 0
 syn match scalaNumber /\<[1-9]\d*[dDfFlL]\?\>/  " A multi-digit number - octal numbers with leading 0's are deprecated in Scala
@@ -176,16 +176,16 @@ syn match scalaNumber /\<0[xX][0-9a-fA-F]\+[dDfFlL]\?\>/ " Hex number
 syn match scalaNumber /\%(\<\d\+\.\d*\|\.\d\+\)\%([eE][-+]\=\d\+\)\=[fFdD]\=/ " exponential notation 1
 syn match scalaNumber /\<\d\+[eE][-+]\=\d\+[fFdD]\=\>/ " exponential notation 2
 syn match scalaNumber /\<\d\+\%([eE][-+]\=\d\+\)\=[fFdD]\>/ " exponential notation 3
-hi link scalaNumber Number
+hi def link scalaNumber Number
 
 syn region scalaRoundBrackets start="(" end=")" skipwhite contained contains=scalaTypeDeclaration,scalaSquareBrackets,scalaRoundBrackets
 
 syn region scalaSquareBrackets matchgroup=scalaSquareBracketsBrackets start="\[" end="\]" skipwhite nextgroup=scalaTypeExtension contains=scalaTypeDeclaration,scalaSquareBrackets,scalaTypeOperator,scalaTypeAnnotationParameter
 syn match scalaTypeOperator /[-+=:<>]\+/ contained
 syn match scalaTypeAnnotationParameter /@\<[`_A-Za-z0-9$]\+\>/ contained
-hi link scalaSquareBracketsBrackets Type
-hi link scalaTypeOperator Keyword
-hi link scalaTypeAnnotationParameter Function
+hi def link scalaSquareBracketsBrackets Type
+hi def link scalaTypeOperator Keyword
+hi def link scalaTypeAnnotationParameter Function
 
 syn match scalaShebang "\%^#!.*" display
 syn region scalaMultilineComment start="/\*" end="\*/" contains=scalaMultilineComment,scalaDocLinks,scalaParameterAnnotation,scalaCommentAnnotation,scalaTodo,scalaCommentCodeBlock,@Spell keepend fold
@@ -195,20 +195,20 @@ syn match scalaParamAnnotationValue /[.`_A-Za-z0-9$]\+/ contained
 syn region scalaDocLinks start="\[\[" end="\]\]" contained
 syn region scalaCommentCodeBlock matchgroup=Keyword start="{{{" end="}}}" contained
 syn match scalaTodo "\vTODO|FIXME|XXX" contained
-hi link scalaShebang Comment
-hi link scalaMultilineComment Comment
-hi link scalaDocLinks Function
-hi link scalaParameterAnnotation Function
-hi link scalaParamAnnotationValue Keyword
-hi link scalaCommentAnnotation Function
-hi link scalaCommentCodeBlock String
-hi link scalaTodo Todo
+hi def link scalaShebang Comment
+hi def link scalaMultilineComment Comment
+hi def link scalaDocLinks Function
+hi def link scalaParameterAnnotation Function
+hi def link scalaParamAnnotationValue Keyword
+hi def link scalaCommentAnnotation Function
+hi def link scalaCommentCodeBlock String
+hi def link scalaTodo Todo
 
 syn match scalaAnnotation /@\<[`_A-Za-z0-9$]\+\>/
-hi link scalaAnnotation PreProc
+hi def link scalaAnnotation PreProc
 
 syn match scalaTrailingComment "//.*$" contains=scalaTodo,@Spell
-hi link scalaTrailingComment Comment
+hi def link scalaTrailingComment Comment
 
 syn match scalaAkkaFSM /goto([^)]*)\_s\+\<using\>/ contains=scalaAkkaFSMGotoUsing
 syn match scalaAkkaFSM /stay\_s\+using/
@@ -221,8 +221,8 @@ syn match scalaAkkaFSM /onTermination/
 syn match scalaAkkaFSM /whenUnhandled/
 syn match scalaAkkaFSMGotoUsing /\<using\>/
 syn match scalaAkkaFSMGotoUsing /\<goto\>/
-hi link scalaAkkaFSM PreProc
-hi link scalaAkkaFSMGotoUsing PreProc
+hi def link scalaAkkaFSM PreProc
+hi def link scalaAkkaFSMGotoUsing PreProc
 
 let b:current_syntax = 'scala'
 

runtime/syntax/vim.vim

@@ -1,8 +1,8 @@
 " Vim syntax file
 " Language:	Vim 8.2 script
 " Maintainer:	Charles E. Campbell <NcampObell@SdrPchip.AorgM-NOSPAM>
-" Last Change:	December 21, 2021
-" Version:	8.2-20
+" Last Change:	January 11, 2022
+" Version:	8.2-24
 " URL:	http://www.drchip.org/astronaut/vim/index.html#SYNTAX_VIM
 " Automatically generated keyword lists: {{{1
 
@@ -19,12 +19,12 @@ syn keyword vimTodo contained	COMBAK	FIXME	TODO	XXX
 syn cluster vimCommentGroup	contains=vimTodo,@Spell
 
 " regular vim commands {{{2
-syn keyword vimCommand contained	a ar[gs] argl[ocal] ba[ll] bl[ast] brea[k] buffers ca caf[ter] cbo[ttom] cex[pr] cgete[xpr] cl[ist] cn[ext] colo[rscheme] cons[t] cs d[elete] delel delf[unction] dif[fupdate] difft[his] dli[st] ds[earch] echoc[onsole] em[enu] endw[hile] export filt[er] fo[ld] fu[nction] gvim helpt[ags] iabc[lear] import isp[lit] keepa l[ist] laf[ter] lbel[ow] lcscope lf[ile] lgr[ep] lli[st] lnf[ile] lol[der] lt[ag] lw[indow] menut[ranslate] mkvie[w] nbc[lose] noh[lsearch] ol[dfiles] pa[ckadd] po[p] prof[ile] pta[g] ptr[ewind] py3f[ile] pythonx quita[ll] redraws[tatus] rew[ind] rubyf[ile] sIg sa[rgument] sba[ll] sbr[ewind] scl scscope sfir[st] sgl sic sin sm[ap] snoreme spelld[ump] spellw[rong] srg sta[g] sts[elect] sus[pend] syncbind tabN[ext] tabl[ast] tabr[ewind] tcld[o] tj[ump] tlu tno[remap] tu[nmenu] undol[ist] v vie[w] vne[w] wh[ile] wn[ext] wv[iminfo] xmenu xunme
-syn keyword vimCommand contained	ab arga[dd] argu[ment] bad[d] bm[odified] breaka[dd] bun[load] cabc[lear] cal[l] cc cf[ile] changes cla[st] cnew[er] com cope[n] cscope debug delep dell diffg[et] dig[raphs] do dsp[lit] echoe[rr] en[dif] ene[w] exu[sage] fin[d] foldc[lose] g h[elp] hi if in iuna[bbrev] keepalt la[st] lan[guage] lbo[ttom] ld[o] lfdo lgrepa[dd] lma lo[adview] lop[en] lua m[ove] mes[sages] mod[e] nbs[tart] nor omapc[lear] packl[oadall] popu[p] profd[el] ptf[irst] pts[elect] py3f[ile] pyx r[ead] redrawt[abline] ri[ght] rundo sIl sal[l] sbf[irst] sc scp se[t] sg sgn sie sip sme snoremenu spelli[nfo] spr[evious] sri star[tinsert] substitutepattern sv[iew] syntime tabc[lose] tabm[ove] tabs tclf[ile] tl[ast] tlunmenu to[pleft] tunma[p] unh[ide] var vim9[cmd] vs[plit] win[size] wp[revious] x[it] xnoreme xunmenu
-syn keyword vimCommand contained	abc[lear] argd[elete] as[cii] balt bn[ext] breakd[el] bw[ipeout] cabo[ve] cat[ch] ccl[ose] cfdo chd[ir] class cnf[ile] comc[lear] cp[revious] cstag debugg[reedy] deletel delm[arks] diffo[ff] dir doau e[dit] echom[sg] enddef eval f[ile] fina[lly] foldd[oopen] go[to] ha[rdcopy] hid[e] ij[ump] inor j[oin] keepj[umps] lab[ove] lat lc[d] le[ft] lfir[st] lh[elpgrep] lmak[e] loadk lp[revious] luado ma[rk] mk[exrc] mz[scheme] new nore on[ly] pc[lose] pp[op] promptf[ind] ptj[ump] pu[t] py[thon] pyxdo rec[over] reg[isters] rightb[elow] rv[iminfo] sIn san[dbox] sbl[ast] scI scr[iptnames] setf[iletype] sgI sgp sig sir smenu so[urce] spellr[are] sr srl startg[replace] substituterepeat sw[apname] t tabd[o] tabn[ext] tags te[aroff] tlm tm[enu] tp[revious] type unl ve[rsion] vim9s[cript] wN[ext] winc[md] wq xa[ll] xnoremenu xwininfo
-syn keyword vimCommand contained	abo[veleft] argdo au bd[elete] bo[tright] breakl[ist] cN[ext] cad[dbuffer] cb[uffer] cd cfir[st] che[ckpath] cle[arjumps] cnor comp[iler] cpf[ile] cun def deletep delp diffp[atch] disa[ssemble] doaut ea echon endf[unction] ex files fini[sh] folddoc[losed] gr[ep] helpc[lose] his[tory] il[ist] interface ju[mps] keepp[atterns] lad[dexpr] later lch[dir] lefta[bove] lg[etfile] lhi[story] lmapc[lear] loadkeymap lpf[ile] luafile mak[e] mks[ession] mzf[ile] nmapc[lear] nos[wapfile] opt[ions] pe[rl] pre[serve] promptr[epl] ptl[ast] pw[d] pydo pyxfile red[o] res[ize] ru[ntime] sI sIp sav[eas] sbm[odified] sce scripte[ncoding] setg[lobal] sgc sgr sign sl[eep] smile sor[t] spellr[epall] srI srn startr[eplace] sun[hide] sy tN[ext] tabe[dit] tabnew tc[d] ter[minal] tlmenu tma[p] tr[ewind] u[ndo] unlo[ckvar] verb[ose] vim[grep] w[rite] windo wqa[ll] xmapc[lear] xprop y[ank]
-syn keyword vimCommand contained	addd arge[dit] bN[ext] bel[owright] bp[revious] bro[wse] cNf[ile] cadde[xpr] cbe[fore] cdo cg[etfile] checkt[ime] clo[se] co[py] con[tinue] cq[uit] cuna[bbrev] defc[ompile] deletl dep diffpu[t] dj[ump] dp earlier el[se] endfo[r] exi[t] filet fir[st] foldo[pen] grepa[dd] helpf[ind] i imapc[lear] intro k lN[ext] laddb[uffer] lb[uffer] lcl[ose] leg[acy] lgetb[uffer] ll lne[xt] loc[kmarks] lr[ewind] lv[imgrep] marks mksp[ell] n[ext] noa nu[mber] ownsyntax ped[it] prev[ious] ps[earch] ptn[ext] py3 pyf[ile] q[uit] redi[r] ret[ab] rub[y] sIc sIr sbN[ext] sbn[ext] scg scriptv[ersion] setl[ocal] sge sh[ell] sil[ent] sla[st] sn[ext] sp[lit] spellr[rare] src srp stj[ump] sunme syn ta[g] tabf[ind] tabo[nly] tch[dir] tf[irst] tln tmapc[lear] try una[bbreviate] uns[ilent] vert[ical] vimgrepa[dd] wa[ll] winp[os] wundo xme xr[estore] z[^.=]
-syn keyword vimCommand contained	al[l] argg[lobal] b[uffer] bf[irst] br[ewind] bufdo c[hange] caddf[ile] cbel[ow] ce[nter] cgetb[uffer] chi[story] cmapc[lear] col[der] conf[irm] cr[ewind] cw[indow] delc[ommand] deletp di[splay] diffs[plit] dl dr[op] ec elsei[f] endt[ry] exp filetype fix[del] for gui helpg[rep] ia imp is[earch] kee[pmarks] lNf[ile] laddf[ile] lbe[fore] lcs lex[pr] lgete[xpr] lla[st] lnew[er] lockv[ar] ls lvimgrepa[dd] mat[ch] mkv[imrc] nb[key] noautocmd o[pen] p[rint] perld[o] pro ptN[ext] ptp[revious] py3do python3 qa[ll] redr[aw] retu[rn] rubyd[o] sIe sN[ext] sb[uffer] sbp[revious] sci scs sf[ind] sgi si sim[alt] sm[agic] sno[magic] spe[llgood] spellu[ndo] sre[wind] st[op] stopi[nsert] sunmenu sync tab tabfir[st] tabp[revious] tcl th[row] tlnoremenu tn[ext] ts[elect] undoj[oin] up[date] vi[sual] viu[sage]
+syn keyword vimCommand contained	a ar[gs] argg[lobal] b[uffer] bf[irst] br[ewind] bufdo c[hange] caddf[ile] cbel[ow] ce[nter] cgetb[uffer] chi[story] cmapc[lear] col[der] conf[irm] cr[ewind] cw[indow] delc[ommand] deletp di[splay] diffs[plit] dl dr[op] ec elsei[f] endt[ry] exp filetype fix[del] for gui helpg[rep] ia imp is[earch] kee[pmarks] lNf[ile] laddf[ile] lbe[fore] lcs lex[pr] lgete[xpr] lla[st] lnew[er] lockv[ar] ls lvimgrepa[dd] mat[ch] mkv[imrc] nb[key] noautocmd o[pen] p[rint] perld[o] pro ptN[ext] ptp[revious] py3do python3 qa[ll] redr[aw] retu[rn] rubyd[o] sIe sN[ext] sb[uffer] sbp[revious] sci scs sf[ind] sgi si sim[alt] sm[agic] sno[magic] spe[llgood] spellu[ndo] sre[wind] st[op] stopi[nsert] sunmenu sync tab tabfir[st] tabp[revious] tcl th[row] tlnoremenu tn[ext] ts[elect] undoj[oin] up[date] vi[sual] viu[sage] wh[ile] wn[ext] wv[iminfo] xmenu xunme
+syn keyword vimCommand contained	ab arga[dd] argl[ocal] ba[ll] bl[ast] brea[k] buffers ca caf[ter] cbo[ttom] cex[pr] cgete[xpr] cl[ist] cn[ext] colo[rscheme] cons[t] cs d[elete] delel delf[unction] dif[fupdate] difft[his] dli[st] ds[earch] echoc[onsole] em[enu] endw[hile] export filt[er] fo[ld] fu[nction] gvim helpt[ags] iabc[lear] import isp[lit] keepa l[ist] laf[ter] lbel[ow] lcscope lf[ile] lgr[ep] lli[st] lnf[ile] lol[der] lt[ag] lw[indow] menut[ranslate] mkvie[w] nbc[lose] noh[lsearch] ol[dfiles] pa[ckadd] po[p] prof[ile] pta[g] ptr[ewind] py3f[ile] pythonx quita[ll] redraws[tatus] rew[ind] rubyf[ile] sIg sa[rgument] sba[ll] sbr[ewind] scl scscope sfir[st] sgl sic sin sm[ap] snoreme spelld[ump] spellw[rong] srg sta[g] sts[elect] sus[pend] syncbind tabN[ext] tabl[ast] tabr[ewind] tcld[o] tj[ump] tlu tno[remap] tu[nmenu] undol[ist] v vie[w] vne[w] win[size] wp[revious] x[it] xnoreme xunmenu
+syn keyword vimCommand contained	abc[lear] argd[elete] argu[ment] bad[d] bm[odified] breaka[dd] bun[load] cabc[lear] cal[l] cc cf[ile] changes cla[st] cnew[er] com cope[n] cscope debug delep dell diffg[et] dig[raphs] do dsp[lit] echoe[rr] en[dif] ene[w] exu[sage] fin[d] foldc[lose] g h[elp] hi if in iuna[bbrev] keepalt la[st] lan[guage] lbo[ttom] ld[o] lfdo lgrepa[dd] lma lo[adview] lop[en] lua m[ove] mes[sages] mod[e] nbs[tart] nor omapc[lear] packl[oadall] popu[p] profd[el] ptf[irst] pts[elect] py3f[ile] pyx r[ead] redrawt[abline] ri[ght] rundo sIl sal[l] sbf[irst] sc scp se[t] sg sgn sie sip sme snoremenu spelli[nfo] spr[evious] sri star[tinsert] substitutepattern sv[iew] syntime tabc[lose] tabm[ove] tabs tclf[ile] tl[ast] tlunmenu to[pleft] tunma[p] unh[ide] var vim9[cmd] vs[plit] winc[md] wq xa[ll] xnoremenu xwininfo
+syn keyword vimCommand contained	abo[veleft] argded[upe] as[cii] balt bn[ext] breakd[el] bw[ipeout] cabo[ve] cat[ch] ccl[ose] cfdo chd[ir] class cnf[ile] comc[lear] cp[revious] cstag debugg[reedy] deletel delm[arks] diffo[ff] dir doau e[dit] echom[sg] enddef eval f[ile] fina[lly] foldd[oopen] go[to] ha[rdcopy] hid[e] ij[ump] inor j[oin] keepj[umps] lab[ove] lat lc[d] le[ft] lfir[st] lh[elpgrep] lmak[e] loadk lp[revious] luado ma[rk] mk[exrc] mz[scheme] new nore on[ly] pc[lose] pp[op] promptf[ind] ptj[ump] pu[t] py[thon] pyxdo rec[over] reg[isters] rightb[elow] rv[iminfo] sIn san[dbox] sbl[ast] scI scr[iptnames] setf[iletype] sgI sgp sig sir smenu so[urce] spellr[are] sr srl startg[replace] substituterepeat sw[apname] t tabd[o] tabn[ext] tags te[aroff] tlm tm[enu] tp[revious] type unl ve[rsion] vim9s[cript] wN[ext] windo wqa[ll] xmapc[lear] xprop y[ank]
+syn keyword vimCommand contained	addd argdo au bd[elete] bo[tright] breakl[ist] cN[ext] cad[dbuffer] cb[uffer] cd cfir[st] che[ckpath] cle[arjumps] cnor comp[iler] cpf[ile] cun def deletep delp diffp[atch] disa[ssemble] doaut ea echon endf[unction] ex files fini[sh] folddoc[losed] gr[ep] helpc[lose] his[tory] il[ist] interface ju[mps] keepp[atterns] lad[dexpr] later lch[dir] lefta[bove] lg[etfile] lhi[story] lmapc[lear] loadkeymap lpf[ile] luafile mak[e] mks[ession] mzf[ile] nmapc[lear] nos[wapfile] opt[ions] pe[rl] pre[serve] promptr[epl] ptl[ast] pw[d] pydo pyxfile red[o] res[ize] ru[ntime] sI sIp sav[eas] sbm[odified] sce scripte[ncoding] setg[lobal] sgc sgr sign sl[eep] smile sor[t] spellr[epall] srI srn startr[eplace] sun[hide] sy tN[ext] tabe[dit] tabnew tc[d] ter[minal] tlmenu tma[p] tr[ewind] u[ndo] unlo[ckvar] verb[ose] vim[grep] w[rite] winp[os] wundo xme xr[estore] z[^.=]
+syn keyword vimCommand contained	al[l] arge[dit] bN[ext] bel[owright] bp[revious] bro[wse] cNf[ile] cadde[xpr] cbe[fore] cdo cg[etfile] checkt[ime] clo[se] co[py] con[tinue] cq[uit] cuna[bbrev] defc[ompile] deletl dep diffpu[t] dj[ump] dp earlier el[se] endfo[r] exi[t] filet fir[st] foldo[pen] grepa[dd] helpf[ind] i imapc[lear] intro k lN[ext] laddb[uffer] lb[uffer] lcl[ose] leg[acy] lgetb[uffer] ll lne[xt] loc[kmarks] lr[ewind] lv[imgrep] marks mksp[ell] n[ext] noa nu[mber] ownsyntax ped[it] prev[ious] ps[earch] ptn[ext] py3 pyf[ile] q[uit] redi[r] ret[ab] rub[y] sIc sIr sbN[ext] sbn[ext] scg scriptv[ersion] setl[ocal] sge sh[ell] sil[ent] sla[st] sn[ext] sp[lit] spellr[rare] src srp stj[ump] sunme syn ta[g] tabf[ind] tabo[nly] tch[dir] tf[irst] tln tmapc[lear] try una[bbreviate] uns[ilent] vert[ical] vimgrepa[dd] wa[ll]
 syn match   vimCommand contained	"\<z[-+^.=]\=\>"
 syn keyword vimStdPlugin contained	Arguments Asm Break Cfilter Clear Continue DiffOrig Evaluate Finish Gdb Lfilter Man N[ext] Over P[rint] Program Run S Source Step Stop Termdebug TermdebugCommand TOhtml Winbar XMLent XMLns
 
@@ -78,12 +78,12 @@ syn match vimHLGroup contained	"Conceal"
 syn case match
 
 " Function Names {{{2
-syn keyword vimFuncName contained	abs argc assert_equal assert_match atan browse bufloaded byteidx charclass chdir ch_log ch_sendexpr col copy debugbreak diff_hlID empty execute expandcmd filter floor foldlevel function getchangelist getcmdline getcursorcharpos getftime getmarklist getreg gettabwinvar getwinposx globpath histadd hlget indent inputrestore invert items job_status json_decode libcallnr list2str log mapcheck matchaddpos matchfuzzypos menu_info nextnonblank popup_atcursor popup_dialog popup_getoptions popup_menu popup_show prompt_setcallback prop_clear prop_type_change pumvisible range reduce reltimestr remote_send resolve screenchar screenstring searchpairpos setbufvar setcursorcharpos setmatches settabwinvar shiftwidth sign_place simplify sound_clear spellbadword state strcharpart stridx strridx swapinfo synIDtrans tabpagenr tanh term_getaltscreen term_getline term_gettty term_setansicolors term_start test_garbagecollect_now test_ignore_error test_null_job test_override test_srand_seed timer_start tr undofile visualmode win_execute winheight winnr win_splitmove
-syn keyword vimFuncName contained	acos argidx assert_equalfile assert_nobeep atan2 browsedir bufname byteidxcomp charcol ch_evalexpr ch_logfile ch_sendraw complete cos deepcopy digraph_get environ exepath extend finddir fmod foldtext garbagecollect getchar getcmdpos getcwd getftype getmatches getreginfo gettagstack getwinposy has histdel hlID index inputsave isdirectory job_getchannel job_stop json_encode line listener_add log10 mapnew matcharg matchlist min nr2char popup_beval popup_filter_menu popup_getpos popup_move pow prompt_setinterrupt prop_find prop_type_delete py3eval readblob reg_executing remote_expr remote_startserver reverse screenchars search searchpos setcellwidths setenv setpos settagstack sign_define sign_placelist sin soundfold spellsuggest str2float strchars string strtrans swapname synstack tabpagewinnr tempname term_getansicolors term_getscrolled terminalprops term_setapi term_wait test_garbagecollect_soon test_null_blob test_null_list test_refcount test_unknown timer_stop trim undotree wildmenumode win_findbuf win_id2tabwin winrestcmd winwidth
-syn keyword vimFuncName contained	add arglistid assert_exception assert_notequal balloon_gettext bufadd bufnr call charidx ch_evalraw ch_open ch_setoptions complete_add cosh delete digraph_getlist escape exists extendnew findfile fnameescape foldtextresult get getcharmod getcmdtype getenv getimstatus getmousepos getregtype gettext getwinvar has_key histget hlset input inputsecret isinf job_info join keys line2byte listener_flush luaeval mapset matchdelete matchstr mkdir or popup_clear popup_filter_yesno popup_hide popup_notification prevnonblank prompt_setprompt prop_list prop_type_get pyeval readdir reg_recording remote_foreground remove round screencol searchcount server2client setcharpos setfperm setqflist setwinvar sign_getdefined sign_undefine sinh sound_playevent split str2list strdisplaywidth strlen strwidth synconcealed system tagfiles term_dumpdiff term_getattr term_getsize term_list term_setkill test_alloc_fail test_getvalue test_null_channel test_null_partial test_scrollbar test_void timer_stopall trunc uniq winbufnr win_getid win_id2win winrestview wordcount
-syn keyword vimFuncName contained	and argv assert_fails assert_notmatch balloon_show bufexists bufwinid ceil ch_canread ch_getbufnr ch_read ch_status complete_check count deletebufline digraph_set eval exists_compiled feedkeys flatten fnamemodify foreground getbufinfo getcharpos getcmdwintype getfontname getjumplist getpid gettabinfo getwininfo glob haslocaldir histnr hostname inputdialog insert islocked job_setoptions js_decode len lispindent listener_remove map match matchend matchstrpos mode pathshorten popup_close popup_findinfo popup_list popup_setoptions printf prop_add prop_remove prop_type_list pyxeval readdirex reltime remote_peek rename rubyeval screenpos searchdecl serverlist setcharsearch setline setreg sha256 sign_getplaced sign_unplace slice sound_playfile sqrt str2nr strftime strpart submatch synID systemlist taglist term_dumpload term_getcursor term_getstatus term_scrape term_setrestore test_autochdir test_gui_drop_files test_null_dict test_null_string test_setmouse timer_info tolower type values wincol win_gettype winlayout winsaveview writefile
-syn keyword vimFuncName contained	append asin assert_false assert_report balloon_split buflisted bufwinnr changenr ch_close ch_getjob ch_readblob cindent complete_info cscope_connection did_filetype digraph_setlist eventhandler exp filereadable flattennew foldclosed fullcommand getbufline getcharsearch getcompletion getfperm getline getpos gettabvar getwinpos glob2regpat hasmapto hlexists iconv inputlist interrupt isnan job_start js_encode libcall list2blob localtime maparg matchadd matchfuzzy max mzeval perleval popup_create popup_findpreview popup_locate popup_settext prompt_getprompt prop_add_list prop_type_add pum_getpos rand readfile reltimefloat remote_read repeat screenattr screenrow searchpair setbufline setcmdpos setloclist settabvar shellescape sign_jump sign_unplacelist sort sound_stop srand strcharlen strgetchar strptime substitute synIDattr tabpagebuflist tan term_dumpwrite term_getjob term_gettitle term_sendkeys term_setsize test_feedinput test_gui_mouse_event test_null_function test_option_not_set test_settime timer_pause toupper typename virtcol windowsversion win_gotoid winline win_screenpos xor
-syn keyword vimFuncName contained	appendbufline assert_beeps assert_inrange assert_true blob2list bufload byte2line char2nr ch_close_in ch_info ch_readraw clearmatches confirm cursor diff_filler echoraw executable expand filewritable float2nr foldclosedend funcref getbufvar getcharstr getcurpos getfsize getloclist getqflist
+syn keyword vimFuncName contained	abs argc assert_equal assert_match atan browse bufloaded byteidx charclass chdir ch_log ch_sendexpr col copy debugbreak diff_hlID empty execute expandcmd filter floor foldlevel function getchangelist getcmdline getcursorcharpos getftime getmarklist getreg gettagstack getwinvar has_key histget hlset input inputsecret isinf job_info join keys line2byte listener_flush luaeval mapset matchdelete matchstr mkdir or popup_clear popup_filter_yesno popup_hide popup_notification prevnonblank prompt_setprompt prop_list prop_type_get pyeval readdir reg_recording remote_foreground remove round screencol searchcount server2client setcharpos setfperm setqflist setwinvar sign_getdefined sign_undefine sinh sound_playevent split str2list strdisplaywidth strlen strwidth synconcealed system tagfiles term_dumpdiff term_getattr term_getsize term_list term_setkill test_alloc_fail test_getvalue test_null_channel test_null_partial test_scrollbar test_void timer_stopall trunc uniq winbufnr win_getid win_id2win winnr win_splitmove
+syn keyword vimFuncName contained	acos argidx assert_equalfile assert_nobeep atan2 browsedir bufname byteidxcomp charcol ch_evalexpr ch_logfile ch_sendraw complete cos deepcopy digraph_get environ exepath extend finddir fmod foldtext garbagecollect getchar getcmdpos getcwd getftype getmatches getreginfo gettext glob haslocaldir histnr hostname inputdialog insert islocked job_setoptions js_decode len lispindent listener_remove map match matchend matchstrpos mode pathshorten popup_close popup_findinfo popup_list popup_setoptions printf prop_add prop_remove prop_type_list pyxeval readdirex reltime remote_peek rename rubyeval screenpos searchdecl serverlist setcharsearch setline setreg sha256 sign_getplaced sign_unplace slice sound_playfile sqrt str2nr strftime strpart submatch synID systemlist taglist term_dumpload term_getcursor term_getstatus term_scrape term_setrestore test_autochdir test_gui_drop_files test_null_dict test_null_string test_setmouse timer_info tolower type values wincol win_gettype winlayout winrestcmd winwidth
+syn keyword vimFuncName contained	add arglistid assert_exception assert_notequal balloon_gettext bufadd bufnr call charidx ch_evalraw ch_open ch_setoptions complete_add cosh delete digraph_getlist escape exists extendnew findfile fnameescape foldtextresult get getcharmod getcmdtype getenv getimstatus getmousepos getregtype getwininfo glob2regpat hasmapto hlexists iconv inputlist interrupt isnan job_start js_encode libcall list2blob localtime maparg matchadd matchfuzzy max mzeval perleval popup_create popup_findpreview popup_locate popup_settext prompt_getprompt prop_add_list prop_type_add pum_getpos rand readfile reltimefloat remote_read repeat screenattr screenrow searchpair setbufline setcmdpos setloclist settabvar shellescape sign_jump sign_unplacelist sort sound_stop srand strcharlen strgetchar strptime substitute synIDattr tabpagebuflist tan term_dumpwrite term_getjob term_gettitle term_sendkeys term_setsize test_feedinput test_gui_mouse_event test_null_function test_option_not_set test_settime timer_pause toupper typename virtcol windowsversion win_gotoid winline winrestview wordcount
+syn keyword vimFuncName contained	and argv assert_fails assert_notmatch balloon_show bufexists bufwinid ceil ch_canread ch_getbufnr ch_read ch_status complete_check count deletebufline digraph_set eval exists_compiled feedkeys flatten fnamemodify foreground getbufinfo getcharpos getcmdwintype getfontname getjumplist getpid gettabinfo getwinpos globpath histadd hlget indent inputrestore invert items job_status json_decode libcallnr list2str log mapcheck matchaddpos matchfuzzypos menu_info nextnonblank popup_atcursor popup_dialog popup_getoptions popup_menu popup_show prompt_setcallback prop_clear prop_type_change pumvisible range reduce reltimestr remote_send resolve screenchar screenstring searchpairpos setbufvar setcursorcharpos setmatches settabwinvar shiftwidth sign_place simplify sound_clear spellbadword state strcharpart stridx strridx swapinfo synIDtrans tabpagenr tanh term_getaltscreen term_getline term_gettty term_setansicolors term_start test_garbagecollect_now test_ignore_error test_null_job test_override test_srand_seed timer_start tr undofile visualmode win_execute winheight win_move_separator winsaveview writefile
+syn keyword vimFuncName contained	append asin assert_false assert_report balloon_split buflisted bufwinnr changenr ch_close ch_getjob ch_readblob cindent complete_info cscope_connection did_filetype digraph_setlist eventhandler exp filereadable flattennew foldclosed fullcommand getbufline getcharsearch getcompletion getfperm getline getpos gettabvar getwinposx has histdel hlID index inputsave isdirectory job_getchannel job_stop json_encode line listener_add log10 mapnew matcharg matchlist min nr2char popup_beval popup_filter_menu popup_getpos popup_move pow prompt_setinterrupt prop_find prop_type_delete py3eval readblob reg_executing remote_expr remote_startserver reverse screenchars search searchpos setcellwidths setenv setpos settagstack sign_define sign_placelist sin soundfold spellsuggest str2float strchars string strtrans swapname synstack tabpagewinnr tempname term_getansicolors term_getscrolled terminalprops term_setapi term_wait test_garbagecollect_soon test_null_blob test_null_list test_refcount test_unknown timer_stop trim undotree wildmenumode win_findbuf win_id2tabwin win_move_statusline win_screenpos xor
+syn keyword vimFuncName contained	appendbufline assert_beeps assert_inrange assert_true blob2list bufload byte2line char2nr ch_close_in ch_info ch_readraw clearmatches confirm cursor diff_filler echoraw executable expand filewritable float2nr foldclosedend funcref getbufvar getcharstr getcurpos getfsize getloclist getqflist gettabwinvar getwinposy
 
 "--- syntax here and above generated by mkvimvim ---
 " Special Vim Highlighting (not automatic) {{{1

runtime/tutor/tutor.ja.euc

@@ -8,7 +8,7 @@
      になっています。
 
      チュートリアルを完了するのに必要な時間は、覚えたコマンドを試すのにどれだ
-     け時間を使うのかにもよりますが、およそ25から30分です。
+     け時間を使うのかにもよりますが、およそ30分です。
 
      ATTENTION:
      以下の練習用コマンドにはこの文章を変更するものもあります。練習を始める前
@@ -24,7 +24,7 @@
 			 レッスン 1.1:  カーソルの移動
 
 
-       ** カーソルを移動するには、示される様に h,j,k,l を押します **
+       ** カーソルを移動するには、示される様に h,j,k,l を押します。 **
 	     ^
 	     k		    ヒント:  h キーは左方向に移動します。
        < h	 l >		     l キーは右方向に移動します。
@@ -65,11 +65,12 @@ NOTE:  :q! <ENTER>
 
   5. 1.3までカーソルを移動させましょう。
 
+
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		       レッスン 1.3: テキスト編集 - 削除
 
 
-    ** ノーマルモードにてカーソルの下の文字を削除するには x を押します **
+    ** ノーマルモードにてカーソルの下の文字を削除するには x を押します。 **
 
   1. 以下の ---> と示された行にカーソルを移動しましょう。
 
@@ -87,12 +88,11 @@ NOTE:
 
 
 
-
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		       レッスン 1.4: テキスト編集 - 挿入
 
 
-	 ** ノーマルモードにてテキストを挿入するには i を押します **
+	 ** ノーマルモードにてテキストを挿入するには i を押します。 **
 
   1. 以下の ---> と示された最初の行にカーソルを移動しましょう。
 
@@ -115,10 +115,10 @@ NOTE:
 		     レッスン 1.5: テキスト編集 - 追加
 
 
-		 ** テキストを追加するには A を押しましょう **
+		 ** テキストを追加するには A を押しましょう。 **
 
   1. 以下の ---> と示された最初の行にカーソルを移動しましょう。
-     カーソルがその文字上にあってもかまいません。
+     カーソルがその行のどの文字上にあってもかまいません。
 
   2. 追加が必要な場所で A をタイプしましょう。
 
@@ -137,18 +137,17 @@ NOTE:
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		     レッスン 1.6: ファイルの編集
 
-
-	   ** ファイルを保存して終了するには :wq とタイプします **
+	   ** ファイルを保存して終了するには :wq とタイプします。 **
 
   !! NOTE: 以下のステップを実行する前に、まず全体を読んでください!!
 
-  1. レッスン 1.2 でやったように :q! をタイプして、このチュートリアルを終了
-     します。あるいは、別の端末がある場合はそこで以下の内容を行ってもかまい
-     ません。
+  1. 別の端末がある場合はそこで以下の内容を行ってください。そうでなければ、
+     レッスン 1.2 でやったように :q! をタイプして、このチュートリアルを終了
+     します。
 
-  2. シェルプロンプトでこのコマンドをタイプします:  vim tutor <ENTER>
-     'vim' が Vim エディタを起動するコマンド、'tutor' は編集したいファイルの
-     名前です。変更してもよいファイルを使いましょう。
+  2. シェルプロンプトでこのコマンドをタイプします:  vim file.txt <ENTER>
+     'vim' が Vim エディタを起動するコマンド、'file.txt' は編集したいファイル
+     の名前です。変更できるファイルの名前を使いましょう。
 
   3. 前のレッスンで学んだように、テキストを挿入、削除します。
 
@@ -186,9 +185,9 @@ NOTE: <ESC>
 			   レッスン 2.1: 削除コマンド
 
 
-	    ** 単語の末尾までを削除するには dw とタイプしましょう **
+	    ** 単語の末尾までを削除するには dw とタイプしましょう。 **
 
-  1. ノーマルモードであることを確認するために <ESC> を押しましょう。
+  1. 確実にノーマルモードにするため <ESC> を押しましょう。
 
   2. 以下の ---> と示された行にカーソルを移動しましょう。
 
@@ -196,22 +195,22 @@ NOTE: <ESC>
 
   4. 単語を削除するために dw とタイプしましょう。
 
-  NOTE: タイプすると、dw という文字がスクリーンの最下行に現われます。
-        タイプを間違ってしまった時には <ESC> を押してやり直しましょう。
+  NOTE: d をタイプすると、その文字がスクリーンの最下行に現われます。Vim は
+	あなたが w をタイプするのを待っています。もし d 以外の文字が表示された
+	時は何か間違っています。 <ESC> を押してやり直しましょう。
 
 ---> この 文 紙 には いくつかの たのしい 必要のない 単語 が 含まれて います。
 
   5. 3 から 4 までを文が正しくなるまで繰り返し、レッスン 2.2 へ進みましょう。
 
 
-
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		       レッスン 2.2: その他の削除コマンド
 
 
-	     ** 行の末尾までを削除するには d$ とタイプしましょう **
+	   ** 行の末尾までを削除するには d$ とタイプしましょう。 **
 
-  1. ノーマルモードであることを確認するのに <ESC> を押しましょう。
+  1. 確実にノーマルモードにするため <ESC> を押しましょう。
 
   2. 以下の ---> と示された行にカーソルを移動しましょう。
 
@@ -232,7 +231,7 @@ NOTE: <ESC>
 		     レッスン 2.3: オペレータとモーション
 
 
-  多くのコマンドはオペレータとモーションからテキストに変更を加えます。
+  テキストに変更を加える多くのコマンドはオペレータとモーションからなります。
   削除コマンド d のオペレータは次の様になっています:
 
   	d   モーション
@@ -248,7 +247,7 @@ NOTE: <ESC>
 
   つまり de とタイプすると、カーソル位置から単語の終わりまでを削除します。
 
-NOTE: 冒険したい人は、ノーマルモードにてコマンドなしにモーションを押して
+NOTE: 冒険したい人は、ノーマルモードにてオペレータなしにモーションを押して
       みましょう。カーソルが目的語一覧で示される位置に移動するはずです。
 
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -259,7 +258,7 @@ NOTE:
 
   1. 以下の ---> と示された行の先頭にカーソルを移動します。
 
-  2. 2w をタイプして単語2つ分前に移動します。
+  2. 2w をタイプして単語2つ分先に移動します。
 
   3. 3e をタイプして3つ目の単語の終端に移動します。
 
@@ -284,24 +283,24 @@ NOTE:
   より多くの削除が行えます:
 	 d   数値   モーション
 
-  1. ---> と示された行の行頭部分にカーソルを移動しましょう。
+  1. ---> と示された行の最初の大文字の単語にカーソルを移動しましょう。
 
-  2. UPPER CASE の単語2つを d2w とタイプして削除します。
+  2. 大文字の単語2つを d2w とタイプして削除します。
 
-  3. UPPER CASE という連続した単語を、1つのコマンドと異なるカウントを指定し、
+  3. 連続した大文字の単語を、異なるカウントを指定した1つのコマンドで削除し、
      ステップ 1 と 2 を繰り返します。
 
 ---> このABC DE行のFGHI JK LMN OP単語はQ RS TUV綺麗になった。
 
-NOTE:  オペレータ d とモーションの間にカウントを使った場合、オペレータのない
-       場合のモーションのように動作します。
-       例: 3dw と d3w は同等で、3w を削除します。
+
+
+
 
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 			 レッスン 2.6: 行の操作
 
 
-		 ** 行全体を削除するには dd とタイプします **
+		 ** 行全体を削除するには dd とタイプします。 **
 
   行全体を削除する頻度が多いので、Viのデザイナーは行の削除を d の2回タイプと
   いう簡単なものに決めました。
@@ -319,24 +318,25 @@ NOTE:
 --->  6)  砂糖は甘い
 --->  7)  オマエモナー
 
+2回タイプで1行に対して作用させる方法は以下で述べるオペレータでも動作します。
 
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 			 レッスン 2.7: やり直しコマンド
 
 
-  ** 最後のコマンドを取り消すには u を押します。U は行全体の取消です。 **
+ ** 最後のコマンドを取り消すには u を押します。U は行全体の取り消しです。 **
 
   1. 以下の ---> と示された行にカーソルを移動し、最初の間違いにカーソル
      を移動しましょう。
-  2. x をタイプしていらない先頭の文字を削除しましょう。
+  2. x をタイプして最初のいらない文字を削除しましょう。
   3. さぁ、u をタイプして最後に実行したコマンドを取り消しましょう。
-  4. 今度は、x を使用して誤りを全て修正しましょう。
+  4. 今度は、x を使用して行内の誤りを全て修正しましょう。
   5. 大文字の U をタイプして、行を元の状態に戻しましょう。
-  6. u をタイプして直前の U コマンドを取消しましょう。
+  6. u をタイプして直前の U コマンドを取り消しましょう。
   7. ではコマンドを再実行するのに CTRL-R (CTRL を押したまま R を打つ)を数回
-     タイプしてみましょう(取消の取消)。
+     タイプしてみましょう(取り消しの取り消し)。
 
----> このの行のの間違いを修正々し、後でそれらの修正をを取消しまますす。
+---> このの行のの間違いを修正々し、後でそれらの修正をを取り消しまますす。
 
   8. これはとても便利なコマンドです。さぁレッスン 2 要約へ進みましょう。
 
@@ -347,45 +347,47 @@ NOTE:
 				レッスン 2 要約
 
 
-  1. カーソル位置から単語の末尾までを削除するには dw とタイプします。
-  2. カーソル位置から行の末尾までを削除するには d$ とタイプします。
-  3. 行全体を削除するには dd とタイプします。
+  1. カーソル位置から次の単語までを削除するには dw とタイプします。
+  2. カーソル位置から単語の末尾までを削除するには de とタイプします。
+  3. カーソル位置から行の末尾までを削除するには d$ とタイプします。
+  4. 行全体を削除するには dd とタイプします。
 
-  4. モーションを繰り返すには数値を付与します:   2w
-  5. 変更に用いるコマンドの形式は
+  5. モーションを繰り返すには数値を付与します:   2w
+  6. 変更に用いるコマンドの形式は
                オペレータ   [数値]   モーション
-
      それぞれ:
        オペレータ - 削除 d の類で何をするか。
-       数値       - そのコマンドを何回繰り返すか。
-       モーション - w (単語)や $ (行末)などの類で、テキストの何に対して働きか
-                    けるか。
+       [数値]     - そのコマンドを何回繰り返すか。
+       モーション - w (単語)や e (単語末尾)、$ (行末)などの類で、テキストの
+		    何に対して働きかけるか。
 
-  6. 行の先頭に移動するにはゼロを使用します:  0
+  7. 行の先頭に移動するにはゼロを使用します:  0
+
+  8. 前回の動作を取り消す:	u   (小文字 u)
+     行全体の変更を取り消す:	U   (大文字 U)
+     取り消しの取り消し:	CTRL-R
 
-  7. 前回の動作を取消す:	u   (小文字 u)
-     行全体の変更を取消す:	U   (大文字 U)
-     取消しの取消し:		CTRL-R
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 			   レッスン 3.1: 貼り付けコマンド
 
 
-    ** 最後に削除された行をカーソルの後に貼り付けるには p をタイプします **
+    ** 最後に削除された行をカーソルの後に貼り付けるには p をタイプします。 **
 
-  1. 以下の段落の最初の行にカーソルを移動しましょう。
+  1. ---> と示された以下の最初の行にカーソルを移動しましょう。
 
-  2. dd  とタイプして行を削除し、Vim のバッファに格納しましょう。
+  2. dd  とタイプして行を削除し、Vim のレジスタに格納しましょう。
 
-  3. 削除した行が本来あるべき位置の上の行まで、カーソルを移動させましょう。
+  3. 削除した行が本来あるべき位置の上の行である c) 行まで、カーソルを移動させ
+     ましょう。
 
-  4. ノーマルモードで p をタイプして格納した行を画面に戻します。
+  4. ノーマルモードで p をタイプして格納した行をカーソルの下に戻します。
 
   5. 順番が正しくなる様にステップ 2 から 4 を繰り返しましょう。
 
-     d) 貴方も学ぶことができる?
-     b) スミレは青い、
-     c) 知恵とは学ぶもの、
-     a) バラは赤い、
+---> d) 貴方も学ぶことができる?
+---> b) スミレは青い、
+---> c) 知恵とは学ぶもの、
+---> a) バラは赤い、
 
 
 
@@ -393,7 +395,7 @@ NOTE:
 			 レッスン 3.2: 置き換えコマンド
 
 
-	   ** カーソルの下の文字を置き換えるには r をタイプします **
+       ** カーソルの下の文字を x に置き換えるには rx をタイプします。 **
 
   1. 以下の ---> と示された最初の行にカーソルを移動しましょう。
 
@@ -416,38 +418,38 @@ NOTE:
 			レッスン 3.3: 変更コマンド
 
 
-	 ** 単語の一部、もしくは全体を変更するには cw とタイプします **
+	 ** 単語の末尾までを変更するには ce とタイプします。 **
 
   1. 以下の ---> と示された最初の行にカーソルを移動しましょう。
 
   2. lubw の u の位置にカーソルを移動しましょう。
 
-  3. cw とタイプし、正しい単語をタイプしましょう(この場合 'ine' とタイプ)。
+  3. ce とタイプし、正しい単語をタイプしましょう(この場合 'ine' とタイプ)。
 
-  4. 次の間違い(変更すべき文字の先頭)に移動するために <ESC> をタイプします。
+  4. <ESC> をタイプしてから次の間違い(変更すべき文字の先頭)に移動します。
 
   5. 最初の行が次の行の様になるまでステップ 3 と 4 を繰り返します。
 
 ---> This lubw has a few wptfd that mrrf changing usf the change operator.
 ---> This line has a few words that need changing using the change operator.
 
-cw は単語を変更するだけでなく、挿入も行えることに注意しましょう。
-
+ce は単語を削除した後、挿入モードに入ることに注意しましょう。
+cc は同じことを行全体に対して行います。
 
 
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		     レッスン 3.4: c を使用したその他の変更
 
 
-     ** 変更コマンドは、削除コマンドと同じ様にオブジェクトを使用します **
+     ** 変更オペレータは、削除と同じ様にモーションを使用します。 **
 
-  1. 変更コマンドは、削除コマンドと同じような動作をします。その形式は
+  1. 変更オペレータは、削除と同じような動作をします。その形式は
 
          c    [数値]   モーション
 
-  2. オブジェクトも同じで、w は単語、 $ は行末などといったものです。
+  2. モーションも同じで、w は単語、 $ は行末などといったものです。
 
-  3. 以下の ---> と示された行にカーソルを移動しましょう。
+  3. 以下の ---> と示された最初の行にカーソルを移動しましょう。
 
   4. 最初の間違いへカーソルを移動しましょう。
 
@@ -470,7 +472,7 @@ NOTE:
      文字をタイプします。
 
   3. 変更コマンドではカーソル位置から特定のモーションで指定される終端までを変
-     更することが可能です。例えば cw ならばカーソル位置から単語の終わりまで、
+     更することが可能です。例えば ce ならばカーソル位置から単語の終わりまで、
      c$ ならば行の終わりまでを変更します。
 
   4. 変更コマンドの形式は
@@ -485,7 +487,7 @@ NOTE:
 		     レッスン 4.1: 位置とファイルの情報
 
   ** ファイル内での位置とファイルの状態を表示するには CTRL-G をタイプします。
-     ファイル内のある行に移動するには G をタイプします **
+     ファイル内のある行に移動するには G をタイプします。 **
 
      NOTE: ステップを実行する前に、このレッスン全てに目を通しましょう!!
 
@@ -496,7 +498,7 @@ NOTE:
 NOTE:  画面の右下隅にカーソルの位置が表示されているかもしれません。これは
        'ruler' オプション(:help 'ruler' を参照)を設定することで表示されます。
 
-  2. 最下行に移動するために G をタイプしましょう。
+  2. ファイルの最下行に移動するために G をタイプしましょう。
      ファイルの先頭に移動するには gg とタイプしましょう。
 
   3. 先ほどの行の番号をタイプし G をタイプしましょう。最初に CTRL-G を押した行
@@ -508,19 +510,19 @@ NOTE:
 			   レッスン 4.2: 検索コマンド
 
 
-	 ** 語句を検索するには / と、前方検索する語句をタイプします。**
+	 ** 語句を検索するには / と、前方検索する語句をタイプします。 **
 
   1. ノーマルモードで / という文字をタイプします。画面一番下に : コマンドと
      同じ様に / が現れることに気づくでしょう。
 
   2. では、'errroor' <ENTER> とタイプしましょう。これが検索したい単語です。
 
-  3. 同じ語をもう一度検索するときは 単に n をタイプします。
+  3. 同じ語句をもう一度検索するときは 単に n をタイプします。
      逆方向に語句を検索するときは N をタイプします。
 
   4. 逆方向に語句を検索する場合は、/ の代わりに ? コマンドを使用します。
 
-  5. 元の場所に戻るには CTRL-O (Ctrl を押し続けながら o 文字タイプ)をタイプし
+  5. 元の場所に戻るには CTRL-O (Ctrl を押し続けながら文字 o をタイプ)をタイプし
      ます。さらに戻るにはこれを繰り返します。CTRL-I は前方向です。
 
 --->  "errroor" は error とスペルが違います;  errroor はいわゆる error です。
@@ -531,7 +533,7 @@ NOTE:
 		      レッスン 4.3: 対応する括弧を検索
 
 
-	    ** 対応する ),] や } を検索するには % をタイプします **
+	    ** 対応する ),] や } を検索するには % をタイプします。 **
 
   1. 下の ---> で示された行で (,[ か { のどれかにカーソルを移動しましょう。
 
@@ -554,7 +556,7 @@ NOTE:
 		       レッスン 4.4: 間違いを変更する方法
 
 
-	** 'old' を 'new' に置換するには :s/old/new/g とタイプします **
+	** 'old' を 'new' に置換するには :s/old/new/g とタイプします。 **
 
   1. 以下の ---> と示された行にカーソルを移動しましょう。
 
@@ -567,9 +569,8 @@ NOTE:
 
 ---> thee best time to see thee flowers is in thee spring.
 
-  4. 複数行から見つかる文字を変更するには
-     :#,#s/old/new/g    #,# には置き換える範囲の開始と終了の行番号を指定しま
-                        す。
+  4. 複数行から見つかる文字の全ての箇所を変更するには
+     :#,#s/old/new/g    #,# には置き換える範囲の開始と終了の行番号を指定する。
      :%s/old/new/g      ファイル全体で見つかるものに対して変更する。
      :%s/old/new/gc     ファイル全体で見つかるものに対して、1つ1つ確認をとりな
                         がら変更する。
@@ -593,7 +594,7 @@ NOTE:
 
   4. 現在行の最初の old を new に置換する。	:s/old/new
      現在行の全ての old を new に置換する。	:s/old/new/g
-     2つの # 間で語句を置換する。		:#,#s/old/new/g
+     2つの # 行の間で語句を置換する。		:#,#s/old/new/g
      ファイルの中の全ての検索語句を置換する。	:%s/old/new/g
      'c' を加えると置換の度に確認を求める。	:%s/old/new/gc
 
@@ -601,10 +602,10 @@ NOTE:
 		    レッスン 5.1: 外部コマンドを実行する方法
 
 
-	     ** :! の後に実行する外部コマンドをタイプします **
+	     ** :! の後に実行する外部コマンドをタイプします。 **
 
   1. 画面の最下部にカーソルが移動するよう、慣れ親しんだ : をタイプしましょう。
-     これでコマンドがタイプできる様になります。
+     これでコマンドライン命令がタイプできる様になります。
 
   2. ここで ! という文字(感嘆符)をタイプしましょう。
      これで外部シェルコマンドが実行できる様になります。
@@ -624,7 +625,7 @@ NOTE:
 		    レッスン 5.2: その他のファイルへ書き込み
 
 
-	** ファイルへ変更を保存するには :w ファイル名 とタイプします **
+	** ファイルへ変更を保存するには :w ファイル名 とタイプします。 **
 
   1. ディレクトリの一覧を得るために :!dir もしくは :!ls とタイプしましょう。
      このあと <ENTER> を押すのは既にご存知ですね。
@@ -634,7 +635,7 @@ NOTE:
   3. では :w TEST とタイプしましょう (TEST は、選んだファイル名です)。
 
   4. これによりファイル全体が TEST という名前で保存されます。
-     もう一度 :!dir もしくは :!ls とタイプして確認してみましょう。
+     もう一度 :!dir もしくは :!ls とタイプしてディレクトリを確認してみましょう。
 
 NOTE: ここで Vim を終了し、ファイル名 TEST と共に起動すると、保存した時の
      チュートリアルの複製ができ上がるはずです。
@@ -647,7 +648,7 @@ NOTE:
 			 レッスン 5.3: 選択した書き込み
 
 
-** ファイルの位置を保存するには、v モーションと :w FILENAME をタイプします。 **
+** ファイルの一部を保存するには、v モーションと :w FILENAME をタイプします。 **
 
   1. この行にカーソルを移動します。
 
@@ -660,20 +661,20 @@ NOTE:
      <ENTER> を押す前に :'<,'>w TEST となっていることを確認して下さい。
 
   5. Vim は TEST というファイルに選択された行を書き込むでしょう。
-     !dir もしくは !ls でそれを確認します。
+     :!dir もしくは :!ls でそれを確認します。
      それは削除しないでおいて下さい。次のレッスンで使用します。
 
 NOTE:  v を押すと、Visual 選択が始まります。カーソルを動かすことで、選択範囲を
        大きくも小さくもできます。さらに、その選択範囲に対してオペレータを適用
-       きます。例えば d はテキストを削除します。
+       できます。例えば d はテキストを削除します。
 
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		       レッスン 5.4: ファイルの取込と合併
 
 
-	** ファイルの中身を挿入するには :r ファイル名 とタイプします **
+	** ファイルの中身を挿入するには :r ファイル名 とタイプします。 **
 
-  1. カーソルを以下の行に合わせます。
+  1. カーソルをこの行のすぐ上に合わせます。
 
 NOTE:  ステップ 2 の実行後、レッスン 5.3 のテキストが現れます。下に下がってこ
        のレッスンに移動しましょう。
@@ -682,19 +683,18 @@ NOTE:
      ここでいう TEST は使うファイルの名前のことです。
      読み込まれたファイルは、カーソル行の下にあります。
 
-  3. 取込んだファイルを確認してみましょう。カーソルを戻すと、レッスン5.3 の
+  3. 取り込んだファイルを確認してみましょう。カーソルを戻すと、レッスン5.3 の
      オリジナルとファイルによるものの2つがあることがわかります。
 
-NOTE: 外部コマンドの出力を読み込むことも出来ます。例えば、
+NOTE: 外部コマンドの出力を読み込むこともできます。例えば、
       :r !ls は ls コマンドの出力をカーソル以下に読み込みます。
 
 
-
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 			       レッスン 5 要約
 
 
-  1.  :!command  によって 外部コマンドを実行します。
+  1.  :!command  によって 外部コマンドを実行する。
 
      よく使う例:
 	 (Windows)	  (Unix)
@@ -717,13 +717,14 @@ NOTE:
 			 レッスン 6.1: オープンコマンド
 
 
-    ** o をタイプすると、カーソルの下の行が開き、挿入モードに入ります **
+    ** o をタイプすると、カーソルの下の行が開き、挿入モードに入ります。 **
 
   1. 以下の ---> と示された最初の行にカーソルを移動しましょう。
 
   2. o (小文字) をタイプして、カーソルの下の行を開き、挿入モードに入ります。
 
-  3. さらに挿入モードを終了する為に <ESC> をタイプします。
+  3. いくつか文字をタイプしてから、挿入モードを終了する為に <ESC> を
+     タイプします。
 
 ---> o  をタイプするとカーソルは開いた行へ移動し挿入モードに入ります。
 
@@ -735,12 +736,11 @@ NOTE:
 
 
 
-
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 			レッスン 6.2: 追加コマンド
 
 
-      ** カーソルの次の位置からテキストを追加するには a とタイプします **
+      ** カーソルの次の位置からテキストを追加するには a とタイプします。 **
 
   1. カーソルを ---> で示された最初の行へ移動しましょう。
 
@@ -763,7 +763,7 @@ NOTE: a, i
 			レッスン 6.3: その他の置換方法
 
 
-	  ** 1文字以上を置き換えるには大文字の R とタイプしましょう **
+	  ** 1文字以上を置き換えるには大文字の R とタイプしましょう。 **
 
   1. 以下の ---> と示された行にカーソルを移動します。最初の xxx の先頭に移動し
      ます。
@@ -781,12 +781,11 @@ NOTE: a, i
 NOTE: 置換モードは挿入モードに似ていますが、全てのタイプされた文字は既存の文字
       を削除します。
 
-
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		   レッスン 6.4: テキストのコピーとペースト
 
 
-     ** テキストのコピーにはオペレータ y を、ペーストには p を使います **
+     ** テキストのコピーにはオペレータ y を、ペーストには p を使います。 **
 
   1. ---> と示された行へ移動し、カーソルを "a)" の後に置いておきます。
 
@@ -804,12 +803,13 @@ NOTE:
 --->  a) this is the first item.
       b)
 
-  NOTE: 単語を1つ yank するのに y をオペレータとして yw とすることも出来ます。
+  NOTE: y をオペレータとして使うこともできます。yw は単語を1つ yank します。
+        yy は行を1つ yank し、p でその行を put します。
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		       レッスン 6.5: オプションの設定
 
 
-  ** 検索や置換の際に大文字/小文字を無視するには、オプションを設定します **
+  ** 検索や置換の際に大文字/小文字を無視するには、オプションを設定します。 **
 
   1. 次の様に入力して 'ignore' を検索しましょう:  /ignore <ENTER>
      n を押して何度か検索を繰り返します。
@@ -826,7 +826,7 @@ NOTE:
   6. 大文字小文字の区別を無効にするには次の様に入力します:  :set noic
 
 NOTE: マッチの強調表示をやめるには次の様に入力します:  :nohlsearch
-NOTE: 1つの検索コマンドだけ大文字小文字の区別をやめたいならば、フレーズに \c
+NOTE: 1つの検索コマンドだけ大文字小文字の区別をやめたいならば、語句内で \c
       を使用します:  /ignore\c <ENTER>
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 				レッスン 6 要約
@@ -835,13 +835,13 @@ NOTE: 1
      O (大文字) をタイプするとカーソルの上の行で挿入モードになる。
 
   2. カーソル上の文字の次からテキストを追加するには a とタイプする。
-     行末に自動でテキストを挿入するには大文字 A をタイプする。
+     行末にテキストを挿入するには大文字 A をタイプする。
 
-  3. e コマンドは単語の終端部カーソルを移動する。
+  3. e コマンドは単語の終端にカーソルを移動する。
 
   4. y オペレータはテキストを yank (コピー)し、p はそれを put (ペースト)する。
 
-  5. 大文字の R をタイプすると置換モードに入り、<ESC>を押すと抜ける。
+  5. 大文字の R をタイプすると置換モードに入り、<ESC> を押すと抜ける。
 
   6. ":set xxx" とタイプするとオプション "xxx" が設定される。
 	'ic' 'ignorecase'	検索時に大文字小文字の区別しない
@@ -849,7 +849,7 @@ NOTE: 1
 	'hls' 'hlsearch'	マッチするすべてを強調表示する
      長い方、短い方、どちらのオプション名でも使用できます。
 
-  7. オプションを無効にするには "no" を付与します:  :set noic
+  7. オプションを無効にするには "no" を付与する:  :set noic
 
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		    レッスン 7.1: オンラインヘルプコマンド
@@ -883,15 +883,15 @@ NOTE: 1
   使用不可となっています。より多くの特徴を使いはじめるには "vimrc" ファイル
   を作成します。
 
-  1. "vimrc" ファイルの編集を開始する。これはシステムに依存します。
-	:edit ~/.vimrc		    UNIX 向け
-	:edit ~/_vimrc		    Windows 向け
+  1. "vimrc" ファイルの編集を開始します。これはシステムに依存します。
+	:e ~/.vimrc		UNIX 向け
+	:e ~/_vimrc		Windows 向け
 
   2. ここでサンプルの "vimrc" を読み込みます。
-	:read $VIMRUNTIME/vimrc_example.vim
+	:r $VIMRUNTIME/vimrc_example.vim
 
   3. 以下のようにファイルへ書き込みます。
-	:write
+	:w
 
   次回 Vim を起動すると、色づけ構文が使えるようになるでしょう。
   この "vimrc" ファイルへ、お好みの設定を追加することができます。
@@ -907,7 +907,7 @@ NOTE: 1
 
   2. 現在のディレクトリに在るファイルを :!ls か :!dir で確認します。
 
-  3. コマンドの開始をタイプします:  :e
+  3. コマンドの先頭をタイプします:  :e
 
   4. CTRL-D を押すと Vim は "e" から始まるコマンドの一覧を表示します。
 

runtime/tutor/tutor.ja.sjis

@@ -8,7 +8,7 @@
      になっています。
 
      チュートリアルを完了するのに必要な時間は、覚えたコマンドを試すのにどれだ
-     け時間を使うのかにもよりますが、およそ25から30分です。
+     け時間を使うのかにもよりますが、およそ30分です。
 
      ATTENTION:
      以下の練習用コマンドにはこの文章を変更するものもあります。練習を始める前
@@ -24,7 +24,7 @@
 			 レッスン 1.1:  カーソルの移動
 
 
-       ** カーソルを移動するには、示される様に h,j,k,l を押します **
+       ** カーソルを移動するには、示される様に h,j,k,l を押します。 **
 	     ^
 	     k		    ヒント:  h キーは左方向に移動します。
        < h	 l >		     l キーは右方向に移動します。
@@ -65,11 +65,12 @@ NOTE:  :q! <ENTER>
 
   5. 1.3までカーソルを移動させましょう。
 
+
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		       レッスン 1.3: テキスト編集 - 削除
 
 
-    ** ノーマルモードにてカーソルの下の文字を削除するには x を押します **
+    ** ノーマルモードにてカーソルの下の文字を削除するには x を押します。 **
 
   1. 以下の ---> と示された行にカーソルを移動しましょう。
 
@@ -87,12 +88,11 @@ NOTE:
 
 
 
-
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		       レッスン 1.4: テキスト編集 - 挿入
 
 
-	 ** ノーマルモードにてテキストを挿入するには i を押します **
+	 ** ノーマルモードにてテキストを挿入するには i を押します。 **
 
   1. 以下の ---> と示された最初の行にカーソルを移動しましょう。
 
@@ -115,10 +115,10 @@ NOTE:
 		     レッスン 1.5: テキスト編集 - 追加
 
 
-		 ** テキストを追加するには A を押しましょう **
+		 ** テキストを追加するには A を押しましょう。 **
 
   1. 以下の ---> と示された最初の行にカーソルを移動しましょう。
-     カーソルがその文字上にあってもかまいません。
+     カーソルがその行のどの文字上にあってもかまいません。
 
   2. 追加が必要な場所で A をタイプしましょう。
 
@@ -137,18 +137,17 @@ NOTE:
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		     レッスン 1.6: ファイルの編集
 
-
-	   ** ファイルを保存して終了するには :wq とタイプします **
+	   ** ファイルを保存して終了するには :wq とタイプします。 **
 
   !! NOTE: 以下のステップを実行する前に、まず全体を読んでください!!
 
-  1. レッスン 1.2 でやったように :q! をタイプして、このチュートリアルを終了
-     します。あるいは、別の端末がある場合はそこで以下の内容を行ってもかまい
-     ません。
+  1. 別の端末がある場合はそこで以下の内容を行ってください。そうでなければ、
+     レッスン 1.2 でやったように :q! をタイプして、このチュートリアルを終了
+     します。
 
-  2. シェルプロンプトでこのコマンドをタイプします:  vim tutor <ENTER>
-     'vim' が Vim エディタを起動するコマンド、'tutor' は編集したいファイルの
-     名前です。変更してもよいファイルを使いましょう。
+  2. シェルプロンプトでこのコマンドをタイプします:  vim file.txt <ENTER>
+     'vim' が Vim エディタを起動するコマンド、'file.txt' は編集したいファイル
+     の名前です。変更できるファイルの名前を使いましょう。
 
   3. 前のレッスンで学んだように、テキストを挿入、削除します。
 
@@ -186,9 +185,9 @@ NOTE: <ESC>
 			   レッスン 2.1: 削除コマンド
 
 
-	    ** 単語の末尾までを削除するには dw とタイプしましょう **
+	    ** 単語の末尾までを削除するには dw とタイプしましょう。 **
 
-  1. ノーマルモードであることを確認するために <ESC> を押しましょう。
+  1. 確実にノーマルモードにするため <ESC> を押しましょう。
 
   2. 以下の ---> と示された行にカーソルを移動しましょう。
 
@@ -196,22 +195,22 @@ NOTE: <ESC>
 
   4. 単語を削除するために dw とタイプしましょう。
 
-  NOTE: タイプすると、dw という文字がスクリーンの最下行に現われます。
-        タイプを間違ってしまった時には <ESC> を押してやり直しましょう。
+  NOTE: d をタイプすると、その文字がスクリーンの最下行に現われます。Vim は
+	あなたが w をタイプするのを待っています。もし d 以外の文字が表示された
+	時は何か間違っています。 <ESC> を押してやり直しましょう。
 
 ---> この 文 紙 には いくつかの たのしい 必要のない 単語 が 含まれて います。
 
   5. 3 から 4 までを文が正しくなるまで繰り返し、レッスン 2.2 へ進みましょう。
 
 
-
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		       レッスン 2.2: その他の削除コマンド
 
 
-	     ** 行の末尾までを削除するには d$ とタイプしましょう **
+	   ** 行の末尾までを削除するには d$ とタイプしましょう。 **
 
-  1. ノーマルモードであることを確認するのに <ESC> を押しましょう。
+  1. 確実にノーマルモードにするため <ESC> を押しましょう。
 
   2. 以下の ---> と示された行にカーソルを移動しましょう。
 
@@ -232,7 +231,7 @@ NOTE: <ESC>
 		     レッスン 2.3: オペレータとモーション
 
 
-  多くのコマンドはオペレータとモーションからテキストに変更を加えます。
+  テキストに変更を加える多くのコマンドはオペレータとモーションからなります。
   削除コマンド d のオペレータは次の様になっています:
 
   	d   モーション
@@ -248,7 +247,7 @@ NOTE: <ESC>
 
   つまり de とタイプすると、カーソル位置から単語の終わりまでを削除します。
 
-NOTE: 冒険したい人は、ノーマルモードにてコマンドなしにモーションを押して
+NOTE: 冒険したい人は、ノーマルモードにてオペレータなしにモーションを押して
       みましょう。カーソルが目的語一覧で示される位置に移動するはずです。
 
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -259,7 +258,7 @@ NOTE:
 
   1. 以下の ---> と示された行の先頭にカーソルを移動します。
 
-  2. 2w をタイプして単語2つ分前に移動します。
+  2. 2w をタイプして単語2つ分先に移動します。
 
   3. 3e をタイプして3つ目の単語の終端に移動します。
 
@@ -284,24 +283,24 @@ NOTE:
   より多くの削除が行えます:
 	 d   数値   モーション
 
-  1. ---> と示された行の行頭部分にカーソルを移動しましょう。
+  1. ---> と示された行の最初の大文字の単語にカーソルを移動しましょう。
 
-  2. UPPER CASE の単語2つを d2w とタイプして削除します。
+  2. 大文字の単語2つを d2w とタイプして削除します。
 
-  3. UPPER CASE という連続した単語を、1つのコマンドと異なるカウントを指定し、
+  3. 連続した大文字の単語を、異なるカウントを指定した1つのコマンドで削除し、
      ステップ 1 と 2 を繰り返します。
 
 ---> このABC DE行のFGHI JK LMN OP単語はQ RS TUV綺麗になった。
 
-NOTE:  オペレータ d とモーションの間にカウントを使った場合、オペレータのない
-       場合のモーションのように動作します。
-       例: 3dw と d3w は同等で、3w を削除します。
+
+
+
 
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 			 レッスン 2.6: 行の操作
 
 
-		 ** 行全体を削除するには dd とタイプします **
+		 ** 行全体を削除するには dd とタイプします。 **
 
   行全体を削除する頻度が多いので、Viのデザイナーは行の削除を d の2回タイプと
   いう簡単なものに決めました。
@@ -319,24 +318,25 @@ NOTE:
 --->  6)  砂糖は甘い
 --->  7)  オマエモナー
 
+2回タイプで1行に対して作用させる方法は以下で述べるオペレータでも動作します。
 
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 			 レッスン 2.7: やり直しコマンド
 
 
-  ** 最後のコマンドを取り消すには u を押します。U は行全体の取消です。 **
+ ** 最後のコマンドを取り消すには u を押します。U は行全体の取り消しです。 **
 
   1. 以下の ---> と示された行にカーソルを移動し、最初の間違いにカーソル
      を移動しましょう。
-  2. x をタイプしていらない先頭の文字を削除しましょう。
+  2. x をタイプして最初のいらない文字を削除しましょう。
   3. さぁ、u をタイプして最後に実行したコマンドを取り消しましょう。
-  4. 今度は、x を使用して誤りを全て修正しましょう。
+  4. 今度は、x を使用して行内の誤りを全て修正しましょう。
   5. 大文字の U をタイプして、行を元の状態に戻しましょう。
-  6. u をタイプして直前の U コマンドを取消しましょう。
+  6. u をタイプして直前の U コマンドを取り消しましょう。
   7. ではコマンドを再実行するのに CTRL-R (CTRL を押したまま R を打つ)を数回
-     タイプしてみましょう(取消の取消)。
+     タイプしてみましょう(取り消しの取り消し)。
 
----> このの行のの間違いを修正々し、後でそれらの修正をを取消しまますす。
+---> このの行のの間違いを修正々し、後でそれらの修正をを取り消しまますす。
 
   8. これはとても便利なコマンドです。さぁレッスン 2 要約へ進みましょう。
 
@@ -347,45 +347,47 @@ NOTE:
 				レッスン 2 要約
 
 
-  1. カーソル位置から単語の末尾までを削除するには dw とタイプします。
-  2. カーソル位置から行の末尾までを削除するには d$ とタイプします。
-  3. 行全体を削除するには dd とタイプします。
+  1. カーソル位置から次の単語までを削除するには dw とタイプします。
+  2. カーソル位置から単語の末尾までを削除するには de とタイプします。
+  3. カーソル位置から行の末尾までを削除するには d$ とタイプします。
+  4. 行全体を削除するには dd とタイプします。
 
-  4. モーションを繰り返すには数値を付与します:   2w
-  5. 変更に用いるコマンドの形式は
+  5. モーションを繰り返すには数値を付与します:   2w
+  6. 変更に用いるコマンドの形式は
                オペレータ   [数値]   モーション
-
      それぞれ:
        オペレータ - 削除 d の類で何をするか。
-       数値       - そのコマンドを何回繰り返すか。
-       モーション - w (単語)や $ (行末)などの類で、テキストの何に対して働きか
-                    けるか。
+       [数値]     - そのコマンドを何回繰り返すか。
+       モーション - w (単語)や e (単語末尾)、$ (行末)などの類で、テキストの
+		    何に対して働きかけるか。
 
-  6. 行の先頭に移動するにはゼロを使用します:  0
+  7. 行の先頭に移動するにはゼロを使用します:  0
+
+  8. 前回の動作を取り消す:	u   (小文字 u)
+     行全体の変更を取り消す:	U   (大文字 U)
+     取り消しの取り消し:	CTRL-R
 
-  7. 前回の動作を取消す:	u   (小文字 u)
-     行全体の変更を取消す:	U   (大文字 U)
-     取消しの取消し:		CTRL-R
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 			   レッスン 3.1: 貼り付けコマンド
 
 
-    ** 最後に削除された行をカーソルの後に貼り付けるには p をタイプします **
+    ** 最後に削除された行をカーソルの後に貼り付けるには p をタイプします。 **
 
-  1. 以下の段落の最初の行にカーソルを移動しましょう。
+  1. ---> と示された以下の最初の行にカーソルを移動しましょう。
 
-  2. dd  とタイプして行を削除し、Vim のバッファに格納しましょう。
+  2. dd  とタイプして行を削除し、Vim のレジスタに格納しましょう。
 
-  3. 削除した行が本来あるべき位置の上の行まで、カーソルを移動させましょう。
+  3. 削除した行が本来あるべき位置の上の行である c) 行まで、カーソルを移動させ
+     ましょう。
 
-  4. ノーマルモードで p をタイプして格納した行を画面に戻します。
+  4. ノーマルモードで p をタイプして格納した行をカーソルの下に戻します。
 
   5. 順番が正しくなる様にステップ 2 から 4 を繰り返しましょう。
 
-     d) 貴方も学ぶことができる?
-     b) スミレは青い、
-     c) 知恵とは学ぶもの、
-     a) バラは赤い、
+---> d) 貴方も学ぶことができる?
+---> b) スミレは青い、
+---> c) 知恵とは学ぶもの、
+---> a) バラは赤い、
 
 
 
@@ -393,7 +395,7 @@ NOTE:
 			 レッスン 3.2: 置き換えコマンド
 
 
-	   ** カーソルの下の文字を置き換えるには r をタイプします **
+       ** カーソルの下の文字を x に置き換えるには rx をタイプします。 **
 
   1. 以下の ---> と示された最初の行にカーソルを移動しましょう。
 
@@ -416,38 +418,38 @@ NOTE:
 			レッスン 3.3: 変更コマンド
 
 
-	 ** 単語の一部、もしくは全体を変更するには cw とタイプします **
+	 ** 単語の末尾までを変更するには ce とタイプします。 **
 
   1. 以下の ---> と示された最初の行にカーソルを移動しましょう。
 
   2. lubw の u の位置にカーソルを移動しましょう。
 
-  3. cw とタイプし、正しい単語をタイプしましょう(この場合 'ine' とタイプ)。
+  3. ce とタイプし、正しい単語をタイプしましょう(この場合 'ine' とタイプ)。
 
-  4. 次の間違い(変更すべき文字の先頭)に移動するために <ESC> をタイプします。
+  4. <ESC> をタイプしてから次の間違い(変更すべき文字の先頭)に移動します。
 
   5. 最初の行が次の行の様になるまでステップ 3 と 4 を繰り返します。
 
 ---> This lubw has a few wptfd that mrrf changing usf the change operator.
 ---> This line has a few words that need changing using the change operator.
 
-cw は単語を変更するだけでなく、挿入も行えることに注意しましょう。
-
+ce は単語を削除した後、挿入モードに入ることに注意しましょう。
+cc は同じことを行全体に対して行います。
 
 
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		     レッスン 3.4: c を使用したその他の変更
 
 
-     ** 変更コマンドは、削除コマンドと同じ様にオブジェクトを使用します **
+     ** 変更オペレータは、削除と同じ様にモーションを使用します。 **
 
-  1. 変更コマンドは、削除コマンドと同じような動作をします。その形式は
+  1. 変更オペレータは、削除と同じような動作をします。その形式は
 
          c    [数値]   モーション
 
-  2. オブジェクトも同じで、w は単語、 $ は行末などといったものです。
+  2. モーションも同じで、w は単語、 $ は行末などといったものです。
 
-  3. 以下の ---> と示された行にカーソルを移動しましょう。
+  3. 以下の ---> と示された最初の行にカーソルを移動しましょう。
 
   4. 最初の間違いへカーソルを移動しましょう。
 
@@ -470,7 +472,7 @@ NOTE:
      文字をタイプします。
 
   3. 変更コマンドではカーソル位置から特定のモーションで指定される終端までを変
-     更することが可能です。例えば cw ならばカーソル位置から単語の終わりまで、
+     更することが可能です。例えば ce ならばカーソル位置から単語の終わりまで、
      c$ ならば行の終わりまでを変更します。
 
   4. 変更コマンドの形式は
@@ -485,7 +487,7 @@ NOTE:
 		     レッスン 4.1: 位置とファイルの情報
 
   ** ファイル内での位置とファイルの状態を表示するには CTRL-G をタイプします。
-     ファイル内のある行に移動するには G をタイプします **
+     ファイル内のある行に移動するには G をタイプします。 **
 
      NOTE: ステップを実行する前に、このレッスン全てに目を通しましょう!!
 
@@ -496,7 +498,7 @@ NOTE:
 NOTE:  画面の右下隅にカーソルの位置が表示されているかもしれません。これは
        'ruler' オプション(:help 'ruler' を参照)を設定することで表示されます。
 
-  2. 最下行に移動するために G をタイプしましょう。
+  2. ファイルの最下行に移動するために G をタイプしましょう。
      ファイルの先頭に移動するには gg とタイプしましょう。
 
   3. 先ほどの行の番号をタイプし G をタイプしましょう。最初に CTRL-G を押した行
@@ -508,19 +510,19 @@ NOTE:
 			   レッスン 4.2: 検索コマンド
 
 
-	 ** 語句を検索するには / と、前方検索する語句をタイプします。**
+	 ** 語句を検索するには / と、前方検索する語句をタイプします。 **
 
   1. ノーマルモードで / という文字をタイプします。画面一番下に : コマンドと
      同じ様に / が現れることに気づくでしょう。
 
   2. では、'errroor' <ENTER> とタイプしましょう。これが検索したい単語です。
 
-  3. 同じ語をもう一度検索するときは 単に n をタイプします。
+  3. 同じ語句をもう一度検索するときは 単に n をタイプします。
      逆方向に語句を検索するときは N をタイプします。
 
   4. 逆方向に語句を検索する場合は、/ の代わりに ? コマンドを使用します。
 
-  5. 元の場所に戻るには CTRL-O (Ctrl を押し続けながら o 文字タイプ)をタイプし
+  5. 元の場所に戻るには CTRL-O (Ctrl を押し続けながら文字 o をタイプ)をタイプし
      ます。さらに戻るにはこれを繰り返します。CTRL-I は前方向です。
 
 --->  "errroor" は error とスペルが違います;  errroor はいわゆる error です。
@@ -531,7 +533,7 @@ NOTE:
 		      レッスン 4.3: 対応する括弧を検索
 
 
-	    ** 対応する ),] や } を検索するには % をタイプします **
+	    ** 対応する ),] や } を検索するには % をタイプします。 **
 
   1. 下の ---> で示された行で (,[ か { のどれかにカーソルを移動しましょう。
 
@@ -554,7 +556,7 @@ NOTE:
 		       レッスン 4.4: 間違いを変更する方法
 
 
-	** 'old' を 'new' に置換するには :s/old/new/g とタイプします **
+	** 'old' を 'new' に置換するには :s/old/new/g とタイプします。 **
 
   1. 以下の ---> と示された行にカーソルを移動しましょう。
 
@@ -567,9 +569,8 @@ NOTE:
 
 ---> thee best time to see thee flowers is in thee spring.
 
-  4. 複数行から見つかる文字を変更するには
-     :#,#s/old/new/g    #,# には置き換える範囲の開始と終了の行番号を指定しま
-                        す。
+  4. 複数行から見つかる文字の全ての箇所を変更するには
+     :#,#s/old/new/g    #,# には置き換える範囲の開始と終了の行番号を指定する。
      :%s/old/new/g      ファイル全体で見つかるものに対して変更する。
      :%s/old/new/gc     ファイル全体で見つかるものに対して、1つ1つ確認をとりな
                         がら変更する。
@@ -593,7 +594,7 @@ NOTE:
 
   4. 現在行の最初の old を new に置換する。	:s/old/new
      現在行の全ての old を new に置換する。	:s/old/new/g
-     2つの # 間で語句を置換する。		:#,#s/old/new/g
+     2つの # 行の間で語句を置換する。		:#,#s/old/new/g
      ファイルの中の全ての検索語句を置換する。	:%s/old/new/g
      'c' を加えると置換の度に確認を求める。	:%s/old/new/gc
 
@@ -601,10 +602,10 @@ NOTE:
 		    レッスン 5.1: 外部コマンドを実行する方法
 
 
-	     ** :! の後に実行する外部コマンドをタイプします **
+	     ** :! の後に実行する外部コマンドをタイプします。 **
 
   1. 画面の最下部にカーソルが移動するよう、慣れ親しんだ : をタイプしましょう。
-     これでコマンドがタイプできる様になります。
+     これでコマンドライン命令がタイプできる様になります。
 
   2. ここで ! という文字(感嘆符)をタイプしましょう。
      これで外部シェルコマンドが実行できる様になります。
@@ -624,7 +625,7 @@ NOTE:
 		    レッスン 5.2: その他のファイルへ書き込み
 
 
-	** ファイルへ変更を保存するには :w ファイル名 とタイプします **
+	** ファイルへ変更を保存するには :w ファイル名 とタイプします。 **
 
   1. ディレクトリの一覧を得るために :!dir もしくは :!ls とタイプしましょう。
      このあと <ENTER> を押すのは既にご存知ですね。
@@ -634,7 +635,7 @@ NOTE:
   3. では :w TEST とタイプしましょう (TEST は、選んだファイル名です)。
 
   4. これによりファイル全体が TEST という名前で保存されます。
-     もう一度 :!dir もしくは :!ls とタイプして確認してみましょう。
+     もう一度 :!dir もしくは :!ls とタイプしてディレクトリを確認してみましょう。
 
 NOTE: ここで Vim を終了し、ファイル名 TEST と共に起動すると、保存した時の
      チュートリアルの複製ができ上がるはずです。
@@ -647,7 +648,7 @@ NOTE:
 			 レッスン 5.3: 選択した書き込み
 
 
-** ファイルの位置を保存するには、v モーションと :w FILENAME をタイプします。 **
+** ファイルの一部を保存するには、v モーションと :w FILENAME をタイプします。 **
 
   1. この行にカーソルを移動します。
 
@@ -660,20 +661,20 @@ NOTE:
      <ENTER> を押す前に :'<,'>w TEST となっていることを確認して下さい。
 
   5. Vim は TEST というファイルに選択された行を書き込むでしょう。
-     !dir もしくは !ls でそれを確認します。
+     :!dir もしくは :!ls でそれを確認します。
      それは削除しないでおいて下さい。次のレッスンで使用します。
 
 NOTE:  v を押すと、Visual 選択が始まります。カーソルを動かすことで、選択範囲を
        大きくも小さくもできます。さらに、その選択範囲に対してオペレータを適用
-       きます。例えば d はテキストを削除します。
+       できます。例えば d はテキストを削除します。
 
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		       レッスン 5.4: ファイルの取込と合併
 
 
-	** ファイルの中身を挿入するには :r ファイル名 とタイプします **
+	** ファイルの中身を挿入するには :r ファイル名 とタイプします。 **
 
-  1. カーソルを以下の行に合わせます。
+  1. カーソルをこの行のすぐ上に合わせます。
 
 NOTE:  ステップ 2 の実行後、レッスン 5.3 のテキストが現れます。下に下がってこ
        のレッスンに移動しましょう。
@@ -682,19 +683,18 @@ NOTE:
      ここでいう TEST は使うファイルの名前のことです。
      読み込まれたファイルは、カーソル行の下にあります。
 
-  3. 取込んだファイルを確認してみましょう。カーソルを戻すと、レッスン5.3 の
+  3. 取り込んだファイルを確認してみましょう。カーソルを戻すと、レッスン5.3 の
      オリジナルとファイルによるものの2つがあることがわかります。
 
-NOTE: 外部コマンドの出力を読み込むことも出来ます。例えば、
+NOTE: 外部コマンドの出力を読み込むこともできます。例えば、
       :r !ls は ls コマンドの出力をカーソル以下に読み込みます。
 
 
-
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 			       レッスン 5 要約
 
 
-  1.  :!command  によって 外部コマンドを実行します。
+  1.  :!command  によって 外部コマンドを実行する。
 
      よく使う例:
 	 (Windows)	  (Unix)
@@ -717,13 +717,14 @@ NOTE:
 			 レッスン 6.1: オープンコマンド
 
 
-    ** o をタイプすると、カーソルの下の行が開き、挿入モードに入ります **
+    ** o をタイプすると、カーソルの下の行が開き、挿入モードに入ります。 **
 
   1. 以下の ---> と示された最初の行にカーソルを移動しましょう。
 
   2. o (小文字) をタイプして、カーソルの下の行を開き、挿入モードに入ります。
 
-  3. さらに挿入モードを終了する為に <ESC> をタイプします。
+  3. いくつか文字をタイプしてから、挿入モードを終了する為に <ESC> を
+     タイプします。
 
 ---> o  をタイプするとカーソルは開いた行へ移動し挿入モードに入ります。
 
@@ -735,12 +736,11 @@ NOTE:
 
 
 
-
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 			レッスン 6.2: 追加コマンド
 
 
-      ** カーソルの次の位置からテキストを追加するには a とタイプします **
+      ** カーソルの次の位置からテキストを追加するには a とタイプします。 **
 
   1. カーソルを ---> で示された最初の行へ移動しましょう。
 
@@ -763,7 +763,7 @@ NOTE: a, i
 			レッスン 6.3: その他の置換方法
 
 
-	  ** 1文字以上を置き換えるには大文字の R とタイプしましょう **
+	  ** 1文字以上を置き換えるには大文字の R とタイプしましょう。 **
 
   1. 以下の ---> と示された行にカーソルを移動します。最初の xxx の先頭に移動し
      ます。
@@ -781,12 +781,11 @@ NOTE: a, i
 NOTE: 置換モードは挿入モードに似ていますが、全てのタイプされた文字は既存の文字
       を削除します。
 
-
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		   レッスン 6.4: テキストのコピーとペースト
 
 
-     ** テキストのコピーにはオペレータ y を、ペーストには p を使います **
+     ** テキストのコピーにはオペレータ y を、ペーストには p を使います。 **
 
   1. ---> と示された行へ移動し、カーソルを "a)" の後に置いておきます。
 
@@ -804,12 +803,13 @@ NOTE:
 --->  a) this is the first item.
       b)
 
-  NOTE: 単語を1つ yank するのに y をオペレータとして yw とすることも出来ます。
+  NOTE: y をオペレータとして使うこともできます。yw は単語を1つ yank します。
+        yy は行を1つ yank し、p でその行を put します。
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		       レッスン 6.5: オプションの設定
 
 
-  ** 検索や置換の際に大文字/小文字を無視するには、オプションを設定します **
+  ** 検索や置換の際に大文字/小文字を無視するには、オプションを設定します。 **
 
   1. 次の様に入力して 'ignore' を検索しましょう:  /ignore <ENTER>
      n を押して何度か検索を繰り返します。
@@ -826,7 +826,7 @@ NOTE:
   6. 大文字小文字の区別を無効にするには次の様に入力します:  :set noic
 
 NOTE: マッチの強調表示をやめるには次の様に入力します:  :nohlsearch
-NOTE: 1つの検索コマンドだけ大文字小文字の区別をやめたいならば、フレーズに \c
+NOTE: 1つの検索コマンドだけ大文字小文字の区別をやめたいならば、語句内で \c
       を使用します:  /ignore\c <ENTER>
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 				レッスン 6 要約
@@ -835,13 +835,13 @@ NOTE: 1
      O (大文字) をタイプするとカーソルの上の行で挿入モードになる。
 
   2. カーソル上の文字の次からテキストを追加するには a とタイプする。
-     行末に自動でテキストを挿入するには大文字 A をタイプする。
+     行末にテキストを挿入するには大文字 A をタイプする。
 
-  3. e コマンドは単語の終端部カーソルを移動する。
+  3. e コマンドは単語の終端にカーソルを移動する。
 
   4. y オペレータはテキストを yank (コピー)し、p はそれを put (ペースト)する。
 
-  5. 大文字の R をタイプすると置換モードに入り、<ESC>を押すと抜ける。
+  5. 大文字の R をタイプすると置換モードに入り、<ESC> を押すと抜ける。
 
   6. ":set xxx" とタイプするとオプション "xxx" が設定される。
 	'ic' 'ignorecase'	検索時に大文字小文字の区別しない
@@ -849,7 +849,7 @@ NOTE: 1
 	'hls' 'hlsearch'	マッチするすべてを強調表示する
      長い方、短い方、どちらのオプション名でも使用できます。
 
-  7. オプションを無効にするには "no" を付与します:  :set noic
+  7. オプションを無効にするには "no" を付与する:  :set noic
 
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		    レッスン 7.1: オンラインヘルプコマンド
@@ -883,15 +883,15 @@ NOTE: 1
   使用不可となっています。より多くの特徴を使いはじめるには "vimrc" ファイル
   を作成します。
 
-  1. "vimrc" ファイルの編集を開始する。これはシステムに依存します。
-	:edit ~/.vimrc		    UNIX 向け
-	:edit ~/_vimrc		    Windows 向け
+  1. "vimrc" ファイルの編集を開始します。これはシステムに依存します。
+	:e ~/.vimrc		UNIX 向け
+	:e ~/_vimrc		Windows 向け
 
   2. ここでサンプルの "vimrc" を読み込みます。
-	:read $VIMRUNTIME/vimrc_example.vim
+	:r $VIMRUNTIME/vimrc_example.vim
 
   3. 以下のようにファイルへ書き込みます。
-	:write
+	:w
 
   次回 Vim を起動すると、色づけ構文が使えるようになるでしょう。
   この "vimrc" ファイルへ、お好みの設定を追加することができます。
@@ -907,7 +907,7 @@ NOTE: 1
 
   2. 現在のディレクトリに在るファイルを :!ls か :!dir で確認します。
 
-  3. コマンドの開始をタイプします:  :e
+  3. コマンドの先頭をタイプします:  :e
 
   4. CTRL-D を押すと Vim は "e" から始まるコマンドの一覧を表示します。
 

runtime/tutor/tutor.ja.utf-8

@@ -8,7 +8,7 @@
      になっています。
 
      チュートリアルを完了するのに必要な時間は、覚えたコマンドを試すのにどれだ
-     け時間を使うのかにもよりますが、およそ25から30分です。
+     け時間を使うのかにもよりますが、およそ30分です。
 
      ATTENTION:
      以下の練習用コマンドにはこの文章を変更するものもあります。練習を始める前
@@ -24,7 +24,7 @@
 			 レッスン 1.1:  カーソルの移動
 
 
-       ** カーソルを移動するには、示される様に h,j,k,l を押します **
+       ** カーソルを移動するには、示される様に h,j,k,l を押します。 **
 	     ^
 	     k		    ヒント:  h キーは左方向に移動します。
        < h	 l >		     l キーは右方向に移動します。
@@ -65,11 +65,12 @@ NOTE:  :q! <ENTER> は全ての変更を破棄します。レッスンにて変
 
   5. 1.3までカーソルを移動させましょう。
 
+
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		       レッスン 1.3: テキスト編集 - 削除
 
 
-    ** ノーマルモードにてカーソルの下の文字を削除するには x を押します **
+    ** ノーマルモードにてカーソルの下の文字を削除するには x を押します。 **
 
   1. 以下の ---> と示された行にカーソルを移動しましょう。
 
@@ -87,12 +88,11 @@ NOTE: 全てのレッスンを通じて、覚えようとするのではなく
 
 
 
-
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		       レッスン 1.4: テキスト編集 - 挿入
 
 
-	 ** ノーマルモードにてテキストを挿入するには i を押します **
+	 ** ノーマルモードにてテキストを挿入するには i を押します。 **
 
   1. 以下の ---> と示された最初の行にカーソルを移動しましょう。
 
@@ -115,10 +115,10 @@ NOTE: 全てのレッスンを通じて、覚えようとするのではなく
 		     レッスン 1.5: テキスト編集 - 追加
 
 
-		 ** テキストを追加するには A を押しましょう **
+		 ** テキストを追加するには A を押しましょう。 **
 
   1. 以下の ---> と示された最初の行にカーソルを移動しましょう。
-     カーソルがその文字上にあってもかまいません。
+     カーソルがその行のどの文字上にあってもかまいません。
 
   2. 追加が必要な場所で A をタイプしましょう。
 
@@ -137,18 +137,17 @@ NOTE: 全てのレッスンを通じて、覚えようとするのではなく
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		     レッスン 1.6: ファイルの編集
 
-
-	   ** ファイルを保存して終了するには :wq とタイプします **
+	   ** ファイルを保存して終了するには :wq とタイプします。 **
 
   !! NOTE: 以下のステップを実行する前に、まず全体を読んでください!!
 
-  1. レッスン 1.2 でやったように :q! をタイプして、このチュートリアルを終了
-     します。あるいは、別の端末がある場合はそこで以下の内容を行ってもかまい
-     ません。
+  1. 別の端末がある場合はそこで以下の内容を行ってください。そうでなければ、
+     レッスン 1.2 でやったように :q! をタイプして、このチュートリアルを終了
+     します。
 
-  2. シェルプロンプトでこのコマンドをタイプします:  vim tutor <ENTER>
-     'vim' が Vim エディタを起動するコマンド、'tutor' は編集したいファイルの
-     名前です。変更してもよいファイルを使いましょう。
+  2. シェルプロンプトでこのコマンドをタイプします:  vim file.txt <ENTER>
+     'vim' が Vim エディタを起動するコマンド、'file.txt' は編集したいファイル
+     の名前です。変更できるファイルの名前を使いましょう。
 
   3. 前のレッスンで学んだように、テキストを挿入、削除します。
 
@@ -186,9 +185,9 @@ NOTE: <ESC> キーを押すとノーマルモードに移行します。その
 			   レッスン 2.1: 削除コマンド
 
 
-	    ** 単語の末尾までを削除するには dw とタイプしましょう **
+	    ** 単語の末尾までを削除するには dw とタイプしましょう。 **
 
-  1. ノーマルモードであることを確認するために <ESC> を押しましょう。
+  1. 確実にノーマルモードにするため <ESC> を押しましょう。
 
   2. 以下の ---> と示された行にカーソルを移動しましょう。
 
@@ -196,22 +195,22 @@ NOTE: <ESC> キーを押すとノーマルモードに移行します。その
 
   4. 単語を削除するために dw とタイプしましょう。
 
-  NOTE: タイプすると、dw という文字がスクリーンの最下行に現われます。
-        タイプを間違ってしまった時には <ESC> を押してやり直しましょう。
+  NOTE: d をタイプすると、その文字がスクリーンの最下行に現われます。Vim は
+	あなたが w をタイプするのを待っています。もし d 以外の文字が表示された
+	時は何か間違っています。 <ESC> を押してやり直しましょう。
 
 ---> この 文 紙 には いくつかの たのしい 必要のない 単語 が 含まれて います。
 
   5. 3 から 4 までを文が正しくなるまで繰り返し、レッスン 2.2 へ進みましょう。
 
 
-
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		       レッスン 2.2: その他の削除コマンド
 
 
-	     ** 行の末尾までを削除するには d$ とタイプしましょう **
+	   ** 行の末尾までを削除するには d$ とタイプしましょう。 **
 
-  1. ノーマルモードであることを確認するのに <ESC> を押しましょう。
+  1. 確実にノーマルモードにするため <ESC> を押しましょう。
 
   2. 以下の ---> と示された行にカーソルを移動しましょう。
 
@@ -232,7 +231,7 @@ NOTE: <ESC> キーを押すとノーマルモードに移行します。その
 		     レッスン 2.3: オペレータとモーション
 
 
-  多くのコマンドはオペレータとモーションからテキストに変更を加えます。
+  テキストに変更を加える多くのコマンドはオペレータとモーションからなります。
   削除コマンド d のオペレータは次の様になっています:
 
   	d   モーション
@@ -248,7 +247,7 @@ NOTE: <ESC> キーを押すとノーマルモードに移行します。その
 
   つまり de とタイプすると、カーソル位置から単語の終わりまでを削除します。
 
-NOTE: 冒険したい人は、ノーマルモードにてコマンドなしにモーションを押して
+NOTE: 冒険したい人は、ノーマルモードにてオペレータなしにモーションを押して
       みましょう。カーソルが目的語一覧で示される位置に移動するはずです。
 
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -259,7 +258,7 @@ NOTE: 冒険したい人は、ノーマルモードにてコマンドなしに
 
   1. 以下の ---> と示された行の先頭にカーソルを移動します。
 
-  2. 2w をタイプして単語2つ分前に移動します。
+  2. 2w をタイプして単語2つ分先に移動します。
 
   3. 3e をタイプして3つ目の単語の終端に移動します。
 
@@ -284,24 +283,24 @@ NOTE: 冒険したい人は、ノーマルモードにてコマンドなしに
   より多くの削除が行えます:
 	 d   数値   モーション
 
-  1. ---> と示された行の行頭部分にカーソルを移動しましょう。
+  1. ---> と示された行の最初の大文字の単語にカーソルを移動しましょう。
 
-  2. UPPER CASE の単語2つを d2w とタイプして削除します。
+  2. 大文字の単語2つを d2w とタイプして削除します。
 
-  3. UPPER CASE という連続した単語を、1つのコマンドと異なるカウントを指定し、
+  3. 連続した大文字の単語を、異なるカウントを指定した1つのコマンドで削除し、
      ステップ 1 と 2 を繰り返します。
 
 ---> このABC DE行のFGHI JK LMN OP単語はQ RS TUV綺麗になった。
 
-NOTE:  オペレータ d とモーションの間にカウントを使った場合、オペレータのない
-       場合のモーションのように動作します。
-       例: 3dw と d3w は同等で、3w を削除します。
+
+
+
 
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 			 レッスン 2.6: 行の操作
 
 
-		 ** 行全体を削除するには dd とタイプします **
+		 ** 行全体を削除するには dd とタイプします。 **
 
   行全体を削除する頻度が多いので、Viのデザイナーは行の削除を d の2回タイプと
   いう簡単なものに決めました。
@@ -319,24 +318,25 @@ NOTE:  オペレータ d とモーションの間にカウントを使った場
 --->  6)  砂糖は甘い
 --->  7)  オマエモナー
 
+2回タイプで1行に対して作用させる方法は以下で述べるオペレータでも動作します。
 
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 			 レッスン 2.7: やり直しコマンド
 
 
-  ** 最後のコマンドを取り消すには u を押します。U は行全体の取消です。 **
+ ** 最後のコマンドを取り消すには u を押します。U は行全体の取り消しです。 **
 
   1. 以下の ---> と示された行にカーソルを移動し、最初の間違いにカーソル
      を移動しましょう。
-  2. x をタイプしていらない先頭の文字を削除しましょう。
+  2. x をタイプして最初のいらない文字を削除しましょう。
   3. さぁ、u をタイプして最後に実行したコマンドを取り消しましょう。
-  4. 今度は、x を使用して誤りを全て修正しましょう。
+  4. 今度は、x を使用して行内の誤りを全て修正しましょう。
   5. 大文字の U をタイプして、行を元の状態に戻しましょう。
-  6. u をタイプして直前の U コマンドを取消しましょう。
+  6. u をタイプして直前の U コマンドを取り消しましょう。
   7. ではコマンドを再実行するのに CTRL-R (CTRL を押したまま R を打つ)を数回
-     タイプしてみましょう(取消の取消)。
+     タイプしてみましょう(取り消しの取り消し)。
 
----> このの行のの間違いを修正々し、後でそれらの修正をを取消しまますす。
+---> このの行のの間違いを修正々し、後でそれらの修正をを取り消しまますす。
 
   8. これはとても便利なコマンドです。さぁレッスン 2 要約へ進みましょう。
 
@@ -347,45 +347,47 @@ NOTE:  オペレータ d とモーションの間にカウントを使った場
 				レッスン 2 要約
 
 
-  1. カーソル位置から単語の末尾までを削除するには dw とタイプします。
-  2. カーソル位置から行の末尾までを削除するには d$ とタイプします。
-  3. 行全体を削除するには dd とタイプします。
+  1. カーソル位置から次の単語までを削除するには dw とタイプします。
+  2. カーソル位置から単語の末尾までを削除するには de とタイプします。
+  3. カーソル位置から行の末尾までを削除するには d$ とタイプします。
+  4. 行全体を削除するには dd とタイプします。
 
-  4. モーションを繰り返すには数値を付与します:   2w
-  5. 変更に用いるコマンドの形式は
+  5. モーションを繰り返すには数値を付与します:   2w
+  6. 変更に用いるコマンドの形式は
                オペレータ   [数値]   モーション
-
      それぞれ:
        オペレータ - 削除 d の類で何をするか。
-       数値       - そのコマンドを何回繰り返すか。
-       モーション - w (単語)や $ (行末)などの類で、テキストの何に対して働きか
-                    けるか。
+       [数値]     - そのコマンドを何回繰り返すか。
+       モーション - w (単語)や e (単語末尾)、$ (行末)などの類で、テキストの
+		    何に対して働きかけるか。
 
-  6. 行の先頭に移動するにはゼロを使用します:  0
+  7. 行の先頭に移動するにはゼロを使用します:  0
+
+  8. 前回の動作を取り消す:	u   (小文字 u)
+     行全体の変更を取り消す:	U   (大文字 U)
+     取り消しの取り消し:	CTRL-R
 
-  7. 前回の動作を取消す:	u   (小文字 u)
-     行全体の変更を取消す:	U   (大文字 U)
-     取消しの取消し:		CTRL-R
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 			   レッスン 3.1: 貼り付けコマンド
 
 
-    ** 最後に削除された行をカーソルの後に貼り付けるには p をタイプします **
+    ** 最後に削除された行をカーソルの後に貼り付けるには p をタイプします。 **
 
-  1. 以下の段落の最初の行にカーソルを移動しましょう。
+  1. ---> と示された以下の最初の行にカーソルを移動しましょう。
 
-  2. dd  とタイプして行を削除し、Vim のバッファに格納しましょう。
+  2. dd  とタイプして行を削除し、Vim のレジスタに格納しましょう。
 
-  3. 削除した行が本来あるべき位置の上の行まで、カーソルを移動させましょう。
+  3. 削除した行が本来あるべき位置の上の行である c) 行まで、カーソルを移動させ
+     ましょう。
 
-  4. ノーマルモードで p をタイプして格納した行を画面に戻します。
+  4. ノーマルモードで p をタイプして格納した行をカーソルの下に戻します。
 
   5. 順番が正しくなる様にステップ 2 から 4 を繰り返しましょう。
 
-     d) 貴方も学ぶことができる?
-     b) スミレは青い、
-     c) 知恵とは学ぶもの、
-     a) バラは赤い、
+---> d) 貴方も学ぶことができる?
+---> b) スミレは青い、
+---> c) 知恵とは学ぶもの、
+---> a) バラは赤い、
 
 
 
@@ -393,7 +395,7 @@ NOTE:  オペレータ d とモーションの間にカウントを使った場
 			 レッスン 3.2: 置き換えコマンド
 
 
-	   ** カーソルの下の文字を置き換えるには r をタイプします **
+       ** カーソルの下の文字を x に置き換えるには rx をタイプします。 **
 
   1. 以下の ---> と示された最初の行にカーソルを移動しましょう。
 
@@ -416,38 +418,38 @@ NOTE: 実際に試しましょう。決して覚えるだけにはしないこ
 			レッスン 3.3: 変更コマンド
 
 
-	 ** 単語の一部、もしくは全体を変更するには cw とタイプします **
+	 ** 単語の末尾までを変更するには ce とタイプします。 **
 
   1. 以下の ---> と示された最初の行にカーソルを移動しましょう。
 
   2. lubw の u の位置にカーソルを移動しましょう。
 
-  3. cw とタイプし、正しい単語をタイプしましょう(この場合 'ine' とタイプ)。
+  3. ce とタイプし、正しい単語をタイプしましょう(この場合 'ine' とタイプ)。
 
-  4. 次の間違い(変更すべき文字の先頭)に移動するために <ESC> をタイプします。
+  4. <ESC> をタイプしてから次の間違い(変更すべき文字の先頭)に移動します。
 
   5. 最初の行が次の行の様になるまでステップ 3 と 4 を繰り返します。
 
 ---> This lubw has a few wptfd that mrrf changing usf the change operator.
 ---> This line has a few words that need changing using the change operator.
 
-cw は単語を変更するだけでなく、挿入も行えることに注意しましょう。
-
+ce は単語を削除した後、挿入モードに入ることに注意しましょう。
+cc は同じことを行全体に対して行います。
 
 
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		     レッスン 3.4: c を使用したその他の変更
 
 
-     ** 変更コマンドは、削除コマンドと同じ様にオブジェクトを使用します **
+     ** 変更オペレータは、削除と同じ様にモーションを使用します。 **
 
-  1. 変更コマンドは、削除コマンドと同じような動作をします。その形式は
+  1. 変更オペレータは、削除と同じような動作をします。その形式は
 
          c    [数値]   モーション
 
-  2. オブジェクトも同じで、w は単語、 $ は行末などといったものです。
+  2. モーションも同じで、w は単語、 $ は行末などといったものです。
 
-  3. 以下の ---> と示された行にカーソルを移動しましょう。
+  3. 以下の ---> と示された最初の行にカーソルを移動しましょう。
 
   4. 最初の間違いへカーソルを移動しましょう。
 
@@ -470,7 +472,7 @@ NOTE:  タイプ中の間違いはバックスペースキーを使って直す
      文字をタイプします。
 
   3. 変更コマンドではカーソル位置から特定のモーションで指定される終端までを変
-     更することが可能です。例えば cw ならばカーソル位置から単語の終わりまで、
+     更することが可能です。例えば ce ならばカーソル位置から単語の終わりまで、
      c$ ならば行の終わりまでを変更します。
 
   4. 変更コマンドの形式は
@@ -485,7 +487,7 @@ NOTE:  タイプ中の間違いはバックスペースキーを使って直す
 		     レッスン 4.1: 位置とファイルの情報
 
   ** ファイル内での位置とファイルの状態を表示するには CTRL-G をタイプします。
-     ファイル内のある行に移動するには G をタイプします **
+     ファイル内のある行に移動するには G をタイプします。 **
 
      NOTE: ステップを実行する前に、このレッスン全てに目を通しましょう!!
 
@@ -496,7 +498,7 @@ NOTE:  タイプ中の間違いはバックスペースキーを使って直す
 NOTE:  画面の右下隅にカーソルの位置が表示されているかもしれません。これは
        'ruler' オプション(:help 'ruler' を参照)を設定することで表示されます。
 
-  2. 最下行に移動するために G をタイプしましょう。
+  2. ファイルの最下行に移動するために G をタイプしましょう。
      ファイルの先頭に移動するには gg とタイプしましょう。
 
   3. 先ほどの行の番号をタイプし G をタイプしましょう。最初に CTRL-G を押した行
@@ -508,19 +510,19 @@ NOTE:  画面の右下隅にカーソルの位置が表示されているかも
 			   レッスン 4.2: 検索コマンド
 
 
-	 ** 語句を検索するには / と、前方検索する語句をタイプします。**
+	 ** 語句を検索するには / と、前方検索する語句をタイプします。 **
 
   1. ノーマルモードで / という文字をタイプします。画面一番下に : コマンドと
      同じ様に / が現れることに気づくでしょう。
 
   2. では、'errroor' <ENTER> とタイプしましょう。これが検索したい単語です。
 
-  3. 同じ語をもう一度検索するときは 単に n をタイプします。
+  3. 同じ語句をもう一度検索するときは 単に n をタイプします。
      逆方向に語句を検索するときは N をタイプします。
 
   4. 逆方向に語句を検索する場合は、/ の代わりに ? コマンドを使用します。
 
-  5. 元の場所に戻るには CTRL-O (Ctrl を押し続けながら o 文字タイプ)をタイプし
+  5. 元の場所に戻るには CTRL-O (Ctrl を押し続けながら文字 o をタイプ)をタイプし
      ます。さらに戻るにはこれを繰り返します。CTRL-I は前方向です。
 
 --->  "errroor" は error とスペルが違います;  errroor はいわゆる error です。
@@ -531,7 +533,7 @@ NOTE: 検索がファイルの終わりに達すると、オプション 'wrapsc
 		      レッスン 4.3: 対応する括弧を検索
 
 
-	    ** 対応する ),] や } を検索するには % をタイプします **
+	    ** 対応する ),] や } を検索するには % をタイプします。 **
 
   1. 下の ---> で示された行で (,[ か { のどれかにカーソルを移動しましょう。
 
@@ -554,7 +556,7 @@ NOTE: この機能は括弧が一致していないプログラムをデバッ
 		       レッスン 4.4: 間違いを変更する方法
 
 
-	** 'old' を 'new' に置換するには :s/old/new/g とタイプします **
+	** 'old' を 'new' に置換するには :s/old/new/g とタイプします。 **
 
   1. 以下の ---> と示された行にカーソルを移動しましょう。
 
@@ -567,9 +569,8 @@ NOTE: この機能は括弧が一致していないプログラムをデバッ
 
 ---> thee best time to see thee flowers is in thee spring.
 
-  4. 複数行から見つかる文字を変更するには
-     :#,#s/old/new/g    #,# には置き換える範囲の開始と終了の行番号を指定しま
-                        す。
+  4. 複数行から見つかる文字の全ての箇所を変更するには
+     :#,#s/old/new/g    #,# には置き換える範囲の開始と終了の行番号を指定する。
      :%s/old/new/g      ファイル全体で見つかるものに対して変更する。
      :%s/old/new/gc     ファイル全体で見つかるものに対して、1つ1つ確認をとりな
                         がら変更する。
@@ -593,7 +594,7 @@ NOTE: この機能は括弧が一致していないプログラムをデバッ
 
   4. 現在行の最初の old を new に置換する。	:s/old/new
      現在行の全ての old を new に置換する。	:s/old/new/g
-     2つの # 間で語句を置換する。		:#,#s/old/new/g
+     2つの # 行の間で語句を置換する。		:#,#s/old/new/g
      ファイルの中の全ての検索語句を置換する。	:%s/old/new/g
      'c' を加えると置換の度に確認を求める。	:%s/old/new/gc
 
@@ -601,10 +602,10 @@ NOTE: この機能は括弧が一致していないプログラムをデバッ
 		    レッスン 5.1: 外部コマンドを実行する方法
 
 
-	     ** :! の後に実行する外部コマンドをタイプします **
+	     ** :! の後に実行する外部コマンドをタイプします。 **
 
   1. 画面の最下部にカーソルが移動するよう、慣れ親しんだ : をタイプしましょう。
-     これでコマンドがタイプできる様になります。
+     これでコマンドライン命令がタイプできる様になります。
 
   2. ここで ! という文字(感嘆符)をタイプしましょう。
      これで外部シェルコマンドが実行できる様になります。
@@ -624,7 +625,7 @@ NOTE:  全ての : コマンドは <ENTER> を押して終了しなければな
 		    レッスン 5.2: その他のファイルへ書き込み
 
 
-	** ファイルへ変更を保存するには :w ファイル名 とタイプします **
+	** ファイルへ変更を保存するには :w ファイル名 とタイプします。 **
 
   1. ディレクトリの一覧を得るために :!dir もしくは :!ls とタイプしましょう。
      このあと <ENTER> を押すのは既にご存知ですね。
@@ -634,7 +635,7 @@ NOTE:  全ての : コマンドは <ENTER> を押して終了しなければな
   3. では :w TEST とタイプしましょう (TEST は、選んだファイル名です)。
 
   4. これによりファイル全体が TEST という名前で保存されます。
-     もう一度 :!dir もしくは :!ls とタイプして確認してみましょう。
+     もう一度 :!dir もしくは :!ls とタイプしてディレクトリを確認してみましょう。
 
 NOTE: ここで Vim を終了し、ファイル名 TEST と共に起動すると、保存した時の
      チュートリアルの複製ができ上がるはずです。
@@ -647,7 +648,7 @@ NOTE: ここで Vim を終了し、ファイル名 TEST と共に起動すると
 			 レッスン 5.3: 選択した書き込み
 
 
-** ファイルの位置を保存するには、v モーションと :w FILENAME をタイプします。 **
+** ファイルの一部を保存するには、v モーションと :w FILENAME をタイプします。 **
 
   1. この行にカーソルを移動します。
 
@@ -660,20 +661,20 @@ NOTE: ここで Vim を終了し、ファイル名 TEST と共に起動すると
      <ENTER> を押す前に :'<,'>w TEST となっていることを確認して下さい。
 
   5. Vim は TEST というファイルに選択された行を書き込むでしょう。
-     !dir もしくは !ls でそれを確認します。
+     :!dir もしくは :!ls でそれを確認します。
      それは削除しないでおいて下さい。次のレッスンで使用します。
 
 NOTE:  v を押すと、Visual 選択が始まります。カーソルを動かすことで、選択範囲を
        大きくも小さくもできます。さらに、その選択範囲に対してオペレータを適用
-       きます。例えば d はテキストを削除します。
+       できます。例えば d はテキストを削除します。
 
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		       レッスン 5.4: ファイルの取込と合併
 
 
-	** ファイルの中身を挿入するには :r ファイル名 とタイプします **
+	** ファイルの中身を挿入するには :r ファイル名 とタイプします。 **
 
-  1. カーソルを以下の行に合わせます。
+  1. カーソルをこの行のすぐ上に合わせます。
 
 NOTE:  ステップ 2 の実行後、レッスン 5.3 のテキストが現れます。下に下がってこ
        のレッスンに移動しましょう。
@@ -682,19 +683,18 @@ NOTE:  ステップ 2 の実行後、レッスン 5.3 のテキストが現れ
      ここでいう TEST は使うファイルの名前のことです。
      読み込まれたファイルは、カーソル行の下にあります。
 
-  3. 取込んだファイルを確認してみましょう。カーソルを戻すと、レッスン5.3 の
+  3. 取り込んだファイルを確認してみましょう。カーソルを戻すと、レッスン5.3 の
      オリジナルとファイルによるものの2つがあることがわかります。
 
-NOTE: 外部コマンドの出力を読み込むことも出来ます。例えば、
+NOTE: 外部コマンドの出力を読み込むこともできます。例えば、
       :r !ls は ls コマンドの出力をカーソル以下に読み込みます。
 
 
-
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 			       レッスン 5 要約
 
 
-  1.  :!command  によって 外部コマンドを実行します。
+  1.  :!command  によって 外部コマンドを実行する。
 
      よく使う例:
 	 (Windows)	  (Unix)
@@ -717,13 +717,14 @@ NOTE: 外部コマンドの出力を読み込むことも出来ます。例え
 			 レッスン 6.1: オープンコマンド
 
 
-    ** o をタイプすると、カーソルの下の行が開き、挿入モードに入ります **
+    ** o をタイプすると、カーソルの下の行が開き、挿入モードに入ります。 **
 
   1. 以下の ---> と示された最初の行にカーソルを移動しましょう。
 
   2. o (小文字) をタイプして、カーソルの下の行を開き、挿入モードに入ります。
 
-  3. さらに挿入モードを終了する為に <ESC> をタイプします。
+  3. いくつか文字をタイプしてから、挿入モードを終了する為に <ESC> を
+     タイプします。
 
 ---> o  をタイプするとカーソルは開いた行へ移動し挿入モードに入ります。
 
@@ -735,12 +736,11 @@ NOTE: 外部コマンドの出力を読み込むことも出来ます。例え
 
 
 
-
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 			レッスン 6.2: 追加コマンド
 
 
-      ** カーソルの次の位置からテキストを追加するには a とタイプします **
+      ** カーソルの次の位置からテキストを追加するには a とタイプします。 **
 
   1. カーソルを ---> で示された最初の行へ移動しましょう。
 
@@ -763,7 +763,7 @@ NOTE: a, i と A は同じ挿入モードへ移りますが、文字が挿入さ
 			レッスン 6.3: その他の置換方法
 
 
-	  ** 1文字以上を置き換えるには大文字の R とタイプしましょう **
+	  ** 1文字以上を置き換えるには大文字の R とタイプしましょう。 **
 
   1. 以下の ---> と示された行にカーソルを移動します。最初の xxx の先頭に移動し
      ます。
@@ -781,12 +781,11 @@ NOTE: a, i と A は同じ挿入モードへ移りますが、文字が挿入さ
 NOTE: 置換モードは挿入モードに似ていますが、全てのタイプされた文字は既存の文字
       を削除します。
 
-
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		   レッスン 6.4: テキストのコピーとペースト
 
 
-     ** テキストのコピーにはオペレータ y を、ペーストには p を使います **
+     ** テキストのコピーにはオペレータ y を、ペーストには p を使います。 **
 
   1. ---> と示された行へ移動し、カーソルを "a)" の後に置いておきます。
 
@@ -804,12 +803,13 @@ NOTE: 置換モードは挿入モードに似ていますが、全てのタイ
 --->  a) this is the first item.
       b)
 
-  NOTE: 単語を1つ yank するのに y をオペレータとして yw とすることも出来ます。
+  NOTE: y をオペレータとして使うこともできます。yw は単語を1つ yank します。
+        yy は行を1つ yank し、p でその行を put します。
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		       レッスン 6.5: オプションの設定
 
 
-  ** 検索や置換の際に大文字/小文字を無視するには、オプションを設定します **
+  ** 検索や置換の際に大文字/小文字を無視するには、オプションを設定します。 **
 
   1. 次の様に入力して 'ignore' を検索しましょう:  /ignore <ENTER>
      n を押して何度か検索を繰り返します。
@@ -826,7 +826,7 @@ NOTE: 置換モードは挿入モードに似ていますが、全てのタイ
   6. 大文字小文字の区別を無効にするには次の様に入力します:  :set noic
 
 NOTE: マッチの強調表示をやめるには次の様に入力します:  :nohlsearch
-NOTE: 1つの検索コマンドだけ大文字小文字の区別をやめたいならば、フレーズに \c
+NOTE: 1つの検索コマンドだけ大文字小文字の区別をやめたいならば、語句内で \c
       を使用します:  /ignore\c <ENTER>
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 				レッスン 6 要約
@@ -835,13 +835,13 @@ NOTE: 1つの検索コマンドだけ大文字小文字の区別をやめたい
      O (大文字) をタイプするとカーソルの上の行で挿入モードになる。
 
   2. カーソル上の文字の次からテキストを追加するには a とタイプする。
-     行末に自動でテキストを挿入するには大文字 A をタイプする。
+     行末にテキストを挿入するには大文字 A をタイプする。
 
-  3. e コマンドは単語の終端部カーソルを移動する。
+  3. e コマンドは単語の終端にカーソルを移動する。
 
   4. y オペレータはテキストを yank (コピー)し、p はそれを put (ペースト)する。
 
-  5. 大文字の R をタイプすると置換モードに入り、<ESC>を押すと抜ける。
+  5. 大文字の R をタイプすると置換モードに入り、<ESC> を押すと抜ける。
 
   6. ":set xxx" とタイプするとオプション "xxx" が設定される。
 	'ic' 'ignorecase'	検索時に大文字小文字の区別しない
@@ -849,7 +849,7 @@ NOTE: 1つの検索コマンドだけ大文字小文字の区別をやめたい
 	'hls' 'hlsearch'	マッチするすべてを強調表示する
      長い方、短い方、どちらのオプション名でも使用できます。
 
-  7. オプションを無効にするには "no" を付与します:  :set noic
+  7. オプションを無効にするには "no" を付与する:  :set noic
 
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		    レッスン 7.1: オンラインヘルプコマンド
@@ -883,15 +883,15 @@ NOTE: 1つの検索コマンドだけ大文字小文字の区別をやめたい
   使用不可となっています。より多くの特徴を使いはじめるには "vimrc" ファイル
   を作成します。
 
-  1. "vimrc" ファイルの編集を開始する。これはシステムに依存します。
-	:edit ~/.vimrc		    UNIX 向け
-	:edit ~/_vimrc		    Windows 向け
+  1. "vimrc" ファイルの編集を開始します。これはシステムに依存します。
+	:e ~/.vimrc		UNIX 向け
+	:e ~/_vimrc		Windows 向け
 
   2. ここでサンプルの "vimrc" を読み込みます。
-	:read $VIMRUNTIME/vimrc_example.vim
+	:r $VIMRUNTIME/vimrc_example.vim
 
   3. 以下のようにファイルへ書き込みます。
-	:write
+	:w
 
   次回 Vim を起動すると、色づけ構文が使えるようになるでしょう。
   この "vimrc" ファイルへ、お好みの設定を追加することができます。
@@ -907,7 +907,7 @@ NOTE: 1つの検索コマンドだけ大文字小文字の区別をやめたい
 
   2. 現在のディレクトリに在るファイルを :!ls か :!dir で確認します。
 
-  3. コマンドの開始をタイプします:  :e
+  3. コマンドの先頭をタイプします:  :e
 
   4. CTRL-D を押すと Vim は "e" から始まるコマンドの一覧を表示します。
 

runtime/vim.desktop

@@ -4,6 +4,7 @@
 # Translators: This is the Application Name used in the Vim desktop file
 Name[de]=Vim
 Name[eo]=Vim
+Name[fi]=Vim
 Name[fr]=Vim
 Name[it]=Vim
 Name[ru]=Vim
@@ -13,6 +14,7 @@ Name=Vim
 # Translators: This is the Generic Application Name used in the Vim desktop file
 GenericName[de]=Texteditor
 GenericName[eo]=Tekstoredaktilo
+GenericName[fi]=Tekstinmuokkain
 GenericName[fr]=Éditeur de texte
 GenericName[it]=Editor di testi
 GenericName[ja]=テキストエディタ
@@ -23,6 +25,7 @@ GenericName=Text Editor
 # Translators: This is the comment used in the Vim desktop file
 Comment[de]=Textdateien bearbeiten
 Comment[eo]=Redakti tekstajn dosierojn
+Comment[fi]=Muokkaa tekstitiedostoja
 Comment[fr]=Éditer des fichiers texte
 Comment[it]=Edita file di testo
 Comment[ja]=テキストファイルを編集します
@@ -54,7 +57,6 @@ Comment[es]=Edita archivos de texto
 Comment[et]=Redigeeri tekstifaile
 Comment[eu]=Editatu testu-fitxategiak
 Comment[fa]=ویرایش پرونده‌های متنی
-Comment[fi]=Muokkaa tekstitiedostoja
 Comment[ga]=Eagar comhad Téacs
 Comment[gu]=લખાણ ફાઇલોમાં ફેરફાર કરો
 Comment[he]=ערוך קבצי טקסט
@@ -103,6 +105,7 @@ Type=Application
 # Translators: Search terms to find this application. Do NOT change the semicolons! The list MUST also end with a semicolon!
 Keywords[de]=Text;Editor;
 Keywords[eo]=Teksto;redaktilo;
+Keywords[fi]=Teksti;muokkain;editori;
 Keywords[fr]=Texte;éditeur;
 Keywords[it]=Testo;editor;
 Keywords[ja]=テキスト;エディタ;

src/GvimExt/gvimext.h

@@ -44,12 +44,6 @@
 #include <shlobj.h>
 #include <wchar.h>
 
-/* Accommodate old versions of VC that don't have a modern Platform SDK */
-#if (defined(_MSC_VER) && _MSC_VER < 1300) || !defined(MAXULONG_PTR)
-# undef  UINT_PTR
-# define UINT_PTR UINT
-#endif
-
 #define ResultFromShort(i)  ResultFromScode(MAKE_SCODE(SEVERITY_SUCCESS, 0, (USHORT)(i)))
 
 // Initialize GUIDs (should be done only and at-least once per DLL/EXE)

src/INSTALLpc.txt

@@ -155,83 +155,8 @@ OLDER VERSIONS
 The minimal supported version is Windows XP. Building with older compilers
 might still work, but these instructions might be outdated.
 
-If you need the executable to run on Windows 98 or ME, use the 2003 one
-|msvc-2003-toolkit| or |msvc-2005-express|, and use the source code before
-8.0.0029.
-
-Visual C++ Toolkit 2003				*msvc-2003-toolkit*
------------------------
-
-NOTE: this most likely does not work
-
-You could download the Microsoft Visual C++ Toolkit 2003 from
-    http://msdn.microsoft.com/visualc/vctoolkit2003/
-Unfortunately this URL is no longer valid.  Unofficial downloads appear to be
-available from links mentioned on these pages (use at your own risk):
-   http://www.filewatcher.com/m/VCToolkitSetup.exe.32952488.0.0.html
-   http://feargame.net/wiki/index.php?title=Building_Source_with_the_VC2003_Toolkit
-
-This contains the command-line tools (compiler, linker, CRT headers,
-and libraries) for Visual Studio .NET 2003, but not the Visual Studio IDE.
-To compile and debug Vim with the VC2003 Toolkit, you will also need
-|ms-platform-sdk|, |dotnet-1.1-redist|, |dotnet-1.1-sdk|,
-and |windbg-download|.
-
-It's easier to download Visual C++ 2008 Express Edition, |msvc-2008-express|,
-which is freely available in perpetuity.
-
-The free Code::Blocks IDE works with the VC2003 Toolkit, as described at
-    http://wiki.codeblocks.org/index.php?title=Integrating_Microsoft_Visual_Toolkit_2003_with_Code::Blocks_IDE
-(This site also takes you through configuring a number of other
-free C compilers for Win32.)
-
-To compile Vim using the VC2003 Toolkit and Make_mvc.mak, you must first
-execute the following commands in a cmd.exe window (the msvcsetup.bat batch
-file can be used):
-
-    set PATH=%SystemRoot%\Microsoft.NET\Framework\v1.1.4322;%PATH%
-    call "%VCToolkitInstallDir%vcvars32.bat"
-    set MSVCVer=7.1
-    call "%ProgramFiles%\Microsoft Platform SDK\SetEnv.Cmd"
-    set LIB=%ProgramFiles%\Microsoft Visual Studio .NET 2003\Vc7\lib;%LIB%
-
-Now you can build Vim with Make_mvc.mak.
-
-
-Getting the Windows Platform SDK	    *ms-platform-sdk*
-
-You will also need a copy of the Windows Platform SDK.  Specifically, you need
-the Windows Core SDK subset of the Platform SDK, which contains the Windows
-headers and libraries.  You need to search for it, Microsoft keeps changing
-the URL.
-
-
-Getting the .NET Framework 1.1 Runtime      *dotnet-1.1-redist*
-
-You need the .NET Framework 1.1 Redistributable Package from
-    http://www.microsoft.com/downloads/details.aspx?familyid=262d25e3-f589-4842-8157-034d1e7cf3a3
-or from Windows Update:
-    http://windowsupdate.microsoft.com/
-This is needed to install |dotnet-1.1-sdk|. It also contains cvtres.exe,
-which is needed to link Vim.
-
-
-Getting the .NET Framework 1.1 SDK	    *dotnet-1.1-sdk*
-
-You need the .NET Framework 1.1 SDK from
-    http://www.microsoft.com/downloads/details.aspx?familyid=9b3a2ca6-3647-4070-9f41-a333c6b9181d
-This contains some additional libraries needed to compile Vim,
-such as msvcrt.lib. You must install |dotnet-1.1-redist| before
-installing the .NET 1.1 SDK.
-
-
-Getting the WinDbg debugger		    *windbg-download*
-
-The Debugging Tools for Windows can be downloaded from
-    http://www.microsoft.com/whdc/devtools/debugging/default.mspx
-This includes the WinDbg debugger, which you will want if you ever need
-to debug Vim itself. An earlier version of the Debugging Tools
-is also available through the Platform SDK, |ms-platform-sdk|.
+If you need the executable to run on Windows 98 or ME, use the 2005 one
+|msvc-2005-express|, and use the source code before 8.0.0029.
 
 
 Visual C++ 2005 Express Edition       *msvc-2005-express*

src/Make_cyg_ming.mak

@@ -668,7 +668,14 @@ DEFINES += -DFEAT_DIRECTX_COLOR_EMOJI
 endif
 
 ifeq ($(SODIUM),yes)
+ ifndef DYNAMIC_SODIUM
+DYNAMIC_SODIUM=yes
+ endif
+ ifeq ($(DYNAMIC_SODIUM),yes)
+DEFINES += -DDYNAMIC_SODIUM
+ else
 SODIUMLIB = -lsodium
+ endif
 endif
 
 # Only allow XPM for a GUI build.
@@ -1237,7 +1244,7 @@ $(OUTDIR)/gui_beval.o:	gui_beval.c $(INCL) $(GUI_INCL)
 $(OUTDIR)/gui_w32.o:	gui_w32.c $(INCL) $(GUI_INCL) version.h
 	$(CC) -c $(CFLAGS) gui_w32.c -o $@
 
-$(OUTDIR)/if_cscope.o:	if_cscope.c $(INCL) if_cscope.h
+$(OUTDIR)/if_cscope.o:	if_cscope.c $(INCL)
 	$(CC) -c $(CFLAGS) if_cscope.c -o $@
 
 $(OUTDIR)/if_mzsch.o:	if_mzsch.c $(INCL) $(MZSCHEME_INCL) $(MZ_EXTRA_DEP)

src/Make_mvc.mak

@@ -34,7 +34,6 @@
 #	IME support: IME=yes	(default is yes)
 #	  DYNAMIC_IME=[yes or no]  (to load the imm32.dll dynamically, default
 #	  is yes)
-#	Global IME support: GIME=yes (requires GUI=yes)
 #
 #	Terminal support: TERMINAL=yes (default is yes if FEATURES is HUGE)
 #	  Will also enable CHANNEL
@@ -42,10 +41,10 @@
 #	Sound support: SOUND=yes (default is yes)
 #
 #	Sodium support: SODIUM=[Path to Sodium directory]
-#	 Dynamic built with libsodium
-#	 You need to install the msvc package from
-#	 https://download.libsodium.org/libsodium/releases/
-#	 and package the libsodium.dll with Vim
+#	  DYNAMIC_SODIUM=yes (to load the Sodium DLL dynamically)
+#	  You need to install the msvc package from
+#	  https://download.libsodium.org/libsodium/releases/
+#	  and package the libsodium.dll with Vim
 #
 #
 #	DLL support (EXPERIMENTAL): VIMDLL=yes (default is no)
@@ -275,17 +274,15 @@ MSVC_MAJOR = ($(MSVCVER) / 100 - 5)
 MSVCRT_VER = ($(MSVCVER) / 100 * 10 - 50)
 !endif
 
-# Calculate MSVC_FULL for Visual C++ 8 and up.
-!if $(MSVC_MAJOR) >= 8
-! if [echo MSVC_FULL=_MSC_FULL_VER> msvcfullver.c && $(CC) /EP msvcfullver.c > msvcfullver.~ 2> nul]
-!  message *** ERROR
-!  message Cannot run Visual C to determine its version. Make sure cl.exe is in your PATH.
-!  message This can usually be done by running "vcvarsall.bat", located in the bin directory where Visual Studio was installed.
-!  error Make aborted.
-! else
-!  include msvcfullver.~
-!  if [del msvcfullver.c msvcfullver.~]
-!  endif
+# Calculate MSVC_FULL.
+!if [echo MSVC_FULL=_MSC_FULL_VER> msvcfullver.c && $(CC) /EP msvcfullver.c > msvcfullver.~ 2> nul]
+! message *** ERROR
+! message Cannot run Visual C to determine its version. Make sure cl.exe is in your PATH.
+! message This can usually be done by running "vcvarsall.bat", located in the bin directory where Visual Studio was installed.
+! error Make aborted.
+!else
+! include msvcfullver.~
+! if [del msvcfullver.c msvcfullver.~]
 ! endif
 !endif
 
@@ -306,18 +303,11 @@ MSVCRT_NAME = msvcr$(MSVCRT_VER)
 MSVCRT_NAME = vcruntime$(MSVCRT_VER)
 !endif
 
-!if $(MSVC_MAJOR) == 6
-CPU = ix86
-!endif
-
 ### Set the default $(WINVER) to make it work with VC++7.0 (VS.NET)
 !ifndef WINVER
 WINVER = 0x0501
 !endif
 
-# Flag to turn on Win64 compatibility warnings for VC7.x and VC8.
-WP64CHECK = /Wp64
-
 # Use multiprocess build
 USE_MP = yes
 
@@ -384,6 +374,9 @@ SOUND = no
 !ifndef SODIUM
 SODIUM = no
 !endif
+!ifndef DYNAMIC_SODIUM
+DYNAMIC_SODIUM = yes
+!endif
 
 !if "$(SODIUM)" != "no"
 ! if "$(CPU)" == "AMD64"
@@ -397,8 +390,13 @@ SODIUM = no
 
 !if "$(SODIUM)" != "no"
 SOD_INC		= /I "$(SODIUM)\include"
+! if "$(DYNAMIC_SODIUM)" == "yes"
+SOD_DEFS	= -DHAVE_SODIUM -DDYNAMIC_SODIUM
+SOD_LIB		=
+! else
 SOD_DEFS	= -DHAVE_SODIUM
 SOD_LIB		= $(SOD_LIB)\libsodium.lib
+! endif
 !endif
 
 !ifndef NETBEANS
@@ -492,23 +490,14 @@ CHANNEL_DEFS	= $(CHANNEL_DEFS) -DHAVE_INET_NTOP
 NETBEANS_LIB	= WSock32.lib Ws2_32.lib
 !endif
 
-# Set which version of the CRT to use
-!if defined(USE_MSVCRT)
-# CVARS = $(cvarsdll)
-# !elseif defined(MULTITHREADED)
-# CVARS = $(cvarsmt)
-!else
-# CVARS = $(cvars)
-# CVARS = $(cvarsmt)
-!endif
-
 # need advapi32.lib for GetUserName()
 # need shell32.lib for ExtractIcon()
 # need netapi32.lib for NetUserEnum()
 # gdi32.lib and comdlg32.lib for printing support
 # ole32.lib and uuid.lib are needed for FEAT_SHORTCUT
 CON_LIB = oldnames.lib kernel32.lib advapi32.lib shell32.lib gdi32.lib \
-          comdlg32.lib ole32.lib netapi32.lib uuid.lib /machine:$(CPU)
+	  comdlg32.lib ole32.lib netapi32.lib uuid.lib user32.lib \
+	  /machine:$(CPU)
 !if "$(DELAYLOAD)" == "yes"
 CON_LIB = $(CON_LIB) /DELAYLOAD:comdlg32.dll /DELAYLOAD:ole32.dll DelayImp.lib
 !endif
@@ -518,7 +507,7 @@ CON_LIB = $(CON_LIB) /DELAYLOAD:comdlg32.dll /DELAYLOAD:ole32.dll DelayImp.lib
 #VIMRCLOC = somewhere
 #VIMRUNTIMEDIR = somewhere
 
-CFLAGS = -c /W3 /GF /nologo $(CVARS) -I. -Iproto -DHAVE_PATHDEF -DWIN32 \
+CFLAGS = -c /W3 /GF /nologo -I. -Iproto -DHAVE_PATHDEF -DWIN32 \
 		$(CSCOPE_DEFS) $(TERM_DEFS) $(SOUND_DEFS) $(NETBEANS_DEFS) $(CHANNEL_DEFS) \
 		$(NBDEBUG_DEFS) $(XPM_DEFS) $(SOD_DEFS) $(SOD_INC) \
 		$(DEFINES) -DWINVER=$(WINVER) -D_WIN32_WINNT=$(WINVER)
@@ -552,68 +541,50 @@ CPUNR = sse2
 !endif
 
 # Convert processor ID to MVC-compatible number
-!if $(MSVC_MAJOR) < 8
-! if "$(CPUNR)" == "i586"
-CPUARG = /G5
-! elseif "$(CPUNR)" == "i686"
-CPUARG = /G6
-! elseif "$(CPUNR)" == "sse"
-CPUARG = /G6 /arch:SSE
-! elseif "$(CPUNR)" == "sse2"
-CPUARG = /G7 /arch:SSE2
-! elseif "$(CPUNR)" == "avx" || "$(CPUNR)" == "avx2"
-!  message AVX/AVX2 Instruction Sets are not supported by Visual C++ v$(MSVC_MAJOR)
-!  message Falling back to SSE2
-CPUARG = /G7 /arch:SSE2
-! elseif "$(CPUNR)" == "any"
-CPUARG =
-! endif
-!else
 # IA32/SSE/SSE2 are only supported on x86
-! if "$(ASSEMBLY_ARCHITECTURE)" == "i386" && ("$(CPUNR)" == "i586" || "$(CPUNR)" == "i686" || "$(CPUNR)" == "any")
+!if "$(ASSEMBLY_ARCHITECTURE)" == "i386" && ("$(CPUNR)" == "i586" || "$(CPUNR)" == "i686" || "$(CPUNR)" == "any")
 # VC<11 generates fp87 code by default
-!  if $(MSVC_MAJOR) < 11
+! if $(MSVC_MAJOR) < 11
 CPUARG =
 # VC>=11 needs explicit instructions to generate fp87 code
-!  else
+! else
 CPUARG = /arch:IA32
-!  endif
-! elseif "$(ASSEMBLY_ARCHITECTURE)" == "i386" && "$(CPUNR)" == "sse"
+! endif
+!elseif "$(ASSEMBLY_ARCHITECTURE)" == "i386" && "$(CPUNR)" == "sse"
 CPUARG = /arch:SSE
-! elseif "$(ASSEMBLY_ARCHITECTURE)" == "i386" && "$(CPUNR)" == "sse2"
+!elseif "$(ASSEMBLY_ARCHITECTURE)" == "i386" && "$(CPUNR)" == "sse2"
 CPUARG = /arch:SSE2
-! elseif "$(CPUNR)" == "avx"
+!elseif "$(CPUNR)" == "avx"
 # AVX is only supported by VC 10 and up
-!  if $(MSVC_MAJOR) < 10
-!   message AVX Instruction Set is not supported by Visual C++ v$(MSVC_MAJOR)
-!   if "$(ASSEMBLY_ARCHITECTURE)" == "i386"
-!    message Falling back to SSE2
+! if $(MSVC_MAJOR) < 10
+!  message AVX Instruction Set is not supported by Visual C++ v$(MSVC_MAJOR)
+!  if "$(ASSEMBLY_ARCHITECTURE)" == "i386"
+!   message Falling back to SSE2
 CPUARG = /arch:SSE2
-!   else
-CPUARG =
-!   endif
 !  else
-CPUARG = /arch:AVX
-!  endif
-! elseif "$(CPUNR)" == "avx2"
-# AVX is only supported by VC 10 and up
-!  if $(MSVC_MAJOR) < 10
-!   message AVX2 Instruction Set is not supported by Visual C++ v$(MSVC_MAJOR)
-!   if "$(ASSEMBLY_ARCHITECTURE)" == "i386"
-!    message Falling back to SSE2
-CPUARG = /arch:SSE2
-!   else
 CPUARG =
-!   endif
+!  endif
+! else
+CPUARG = /arch:AVX
+! endif
+!elseif "$(CPUNR)" == "avx2"
+# AVX is only supported by VC 10 and up
+! if $(MSVC_MAJOR) < 10
+!  message AVX2 Instruction Set is not supported by Visual C++ v$(MSVC_MAJOR)
+!  if "$(ASSEMBLY_ARCHITECTURE)" == "i386"
+!   message Falling back to SSE2
+CPUARG = /arch:SSE2
+!  else
+CPUARG =
+!  endif
 # AVX2 is only supported by VC 12U2 and up
 # 180030501 is the full version number for Visual Studio 2013/VC 12 Update 2
-!  elseif $(MSVC_FULL) < 180030501
-!   message AVX2 Instruction Set is not supported by Visual C++ v$(MSVC_MAJOR)-$(MSVC_FULL)
-!   message Falling back to AVX
+! elseif $(MSVC_FULL) < 180030501
+!  message AVX2 Instruction Set is not supported by Visual C++ v$(MSVC_MAJOR)-$(MSVC_FULL)
+!  message Falling back to AVX
 CPUARG = /arch:AVX
-!  else
+! else
 CPUARG = /arch:AVX2
-!  endif
 ! endif
 !endif
 
@@ -671,6 +642,7 @@ CFLAGS = $(CFLAGS) /fsanitize=address
 !endif
 
 !ifdef NODEBUG
+
 VIM = vim
 ! if "$(OPTIMIZE)" == "SPACE"
 OPTFLAG = /O1
@@ -680,58 +652,48 @@ OPTFLAG = /O2
 OPTFLAG = /Ox
 ! endif
 
-! if $(MSVC_MAJOR) >= 8
 # Use link time code generation if not worried about size
-!  if "$(OPTIMIZE)" != "SPACE"
+! if "$(OPTIMIZE)" != "SPACE"
 OPTFLAG = $(OPTFLAG) /GL
-!  endif
-! endif
-
-# (/Wp64 is deprecated in VC9 and generates an obnoxious warning.)
-! if ($(MSVC_MAJOR) == 7) || ($(MSVC_MAJOR) == 8)
-CFLAGS = $(CFLAGS) $(WP64CHECK)
 ! endif
 
 CFLAGS = $(CFLAGS) $(OPTFLAG) -DNDEBUG $(CPUARG)
-RCFLAGS = $(rcflags) $(rcvars) -DNDEBUG
+RCFLAGS = -DNDEBUG
 ! ifdef USE_MSVCRT
 CFLAGS = $(CFLAGS) /MD
 LIBC = msvcrt.lib
 ! else
-LIBC = libcmt.lib
 CFLAGS = $(CFLAGS) /Zl /MT
+LIBC = libcmt.lib
 ! endif
+
 !else  # DEBUG
+
 VIM = vimd
 ! if ("$(CPU)" == "i386") || ("$(CPU)" == "ix86")
 DEBUGINFO = /ZI
 ! endif
 CFLAGS = $(CFLAGS) -D_DEBUG -DDEBUG /Od
-RCFLAGS = $(rcflags) $(rcvars) -D_DEBUG -DDEBUG
-# The /fixed:no is needed for Quantify. Assume not 4.? as unsupported in VC4.0.
-! if $(MSVC_MAJOR) == 4
-LIBC =
-! else
+RCFLAGS = -D_DEBUG -DDEBUG
+# The /fixed:no is needed for Quantify.
 LIBC = /fixed:no
-! endif
 ! ifdef USE_MSVCRT
 CFLAGS = $(CFLAGS) /MDd
 LIBC = $(LIBC) msvcrtd.lib
 ! else
-LIBC = $(LIBC) libcmtd.lib
 CFLAGS = $(CFLAGS) /Zl /MTd
+LIBC = $(LIBC) libcmtd.lib
 ! endif
+
 !endif # DEBUG
 
 !if "$(CL)" == "/D_USING_V110_SDK71_"
 RCFLAGS = $(RCFLAGS) /D_USING_V110_SDK71_
 !endif
 
-!if $(MSVC_MAJOR) >= 8
 # Visual Studio 2005 has 'deprecated' many of the standard CRT functions
 CFLAGS_DEPR = /D_CRT_SECURE_NO_DEPRECATE /D_CRT_NONSTDC_NO_DEPRECATE
 CFLAGS = $(CFLAGS) $(CFLAGS_DEPR)
-!endif
 
 !include Make_all.mak
 !include testdir\Make_all.mak
@@ -787,7 +749,7 @@ OBJ = \
 	$(OUTDIR)\hashtab.obj \
 	$(OUTDIR)\help.obj \
 	$(OUTDIR)\highlight.obj \
-	$(OBJDIR)\if_cscope.obj \
+	$(OUTDIR)\if_cscope.obj \
 	$(OUTDIR)\indent.obj \
 	$(OUTDIR)\insexpand.obj \
 	$(OUTDIR)\json.obj \
@@ -885,11 +847,6 @@ IME_LIB = imm32.lib
 ! endif
 !endif
 
-!if "$(GIME)" == "yes"
-CFLAGS = $(CFLAGS) -DGLOBAL_IME
-OBJ = $(OBJ) $(OUTDIR)\dimm_i.obj $(OUTDIR)\glbl_ime.obj
-!endif
-
 !if "$(GUI)" == "yes"
 SUBSYSTEM = windows
 CFLAGS = $(CFLAGS) -DFEAT_GUI_MSWIN
@@ -910,9 +867,7 @@ GUI_OBJ = \
 	$(OUTDIR)\gui_beval.obj \
 	$(OUTDIR)\gui_w32.obj
 GUI_LIB = \
-	gdi32.lib version.lib $(IME_LIB) \
-	winspool.lib comctl32.lib advapi32.lib shell32.lib netapi32.lib \
-	/machine:$(CPU)
+	version.lib $(IME_LIB) winspool.lib comctl32.lib
 !else
 SUBSYSTEM = console
 CUI_INCL = iscygpty.h
@@ -1320,14 +1275,18 @@ conflags = $(conflags) /map /mapinfo:lines
 !ENDIF
 
 LINKARGS1 = $(linkdebug) $(conflags)
-LINKARGS2 = $(CON_LIB) $(GUI_LIB) $(NODEFAULTLIB) $(LIBC) $(OLE_LIB) user32.lib \
+LINKARGS2 = $(CON_LIB) $(GUI_LIB) $(NODEFAULTLIB) $(LIBC) $(OLE_LIB) \
 		$(LUA_LIB) $(MZSCHEME_LIB) $(PERL_LIB) $(PYTHON_LIB) $(PYTHON3_LIB) $(RUBY_LIB) \
 		$(TCL_LIB) $(SOUND_LIB) $(NETBEANS_LIB) $(XPM_LIB) $(SOD_LIB) $(LINK_PDB)
 
-# Report link time code generation progress if used. 
+# Enable link time code generation if needed.
 !ifdef NODEBUG
-! if $(MSVC_MAJOR) >= 8
-!  if "$(OPTIMIZE)" != "SPACE"
+! if "$(OPTIMIZE)" != "SPACE"
+!  if "$(CI)" == "true" || "$(CI)" == "True"
+# Enable link time code generation, but do not show the progress.
+LINKARGS1 = $(LINKARGS1) /LTCG
+!  else
+# Report link time code generation progress.
 LINKARGS1 = $(LINKARGS1) /LTCG:STATUS
 !  endif
 ! endif
@@ -1464,9 +1423,6 @@ clean: testclean
 	- if exist uninstall.exe del uninstall.exe
 	- if exist if_perl.c del if_perl.c
 	- if exist auto\if_perl.c del auto\if_perl.c
-	- if exist dimm.h del dimm.h
-	- if exist dimm_i.c del dimm_i.c
-	- if exist dimm.tlb del dimm.tlb
 	- if exist dosinst.exe del dosinst.exe
 	cd xxd
 	$(MAKE) /NOLOGO -f Make_mvc.mak clean
@@ -1670,7 +1626,7 @@ $(OUTDIR)/gui_w32.obj:	$(OUTDIR) gui_w32.c $(INCL) $(GUI_INCL) version.h
 
 $(OUTDIR)/gui_dwrite.obj:	$(OUTDIR) gui_dwrite.cpp gui_dwrite.h
 
-$(OUTDIR)/if_cscope.obj: $(OUTDIR) if_cscope.c  $(INCL) if_cscope.h
+$(OUTDIR)/if_cscope.obj: $(OUTDIR) if_cscope.c  $(INCL)
 
 $(OUTDIR)/if_lua.obj: $(OUTDIR) if_lua.c  $(INCL)
 	$(CC) $(CFLAGS_OUTDIR) $(LUA_INC) if_lua.c
@@ -1882,13 +1838,6 @@ iid_ole.c if_ole.h vim.tlb: if_ole.idl
 	midl /nologo /error none /proxy nul /iid iid_ole.c /tlb vim.tlb \
 		/header if_ole.h if_ole.idl
 
-dimm.h dimm_i.c: dimm.idl
-	midl /nologo /error none /proxy nul dimm.idl
-
-$(OUTDIR)/dimm_i.obj: $(OUTDIR) dimm_i.c $(INCL)
-
-$(OUTDIR)/glbl_ime.obj:	$(OUTDIR) glbl_ime.cpp  dimm.h $(INCL)
-
 
 CCCTERM = $(CC) $(CFLAGS) -Ilibvterm/include -DINLINE="" \
 	-DVSNPRINTF=vim_vsnprintf \

src/Make_vms.mms

@@ -908,7 +908,7 @@ highlight.obj : highlight.c vim.h [.auto]config.h feature.h os_unix.h \
 if_cscope.obj : if_cscope.c vim.h [.auto]config.h feature.h os_unix.h \
  ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \
- errors.h globals.h if_cscope.h
+ errors.h globals.h
 if_xcmdsrv.obj : if_xcmdsrv.c vim.h [.auto]config.h feature.h os_unix.h \
  ascii.h keymap.h termdefs.h macros.h structs.h regexp.h \
  gui.h beval.h [.proto]gui_beval.pro option.h ex_cmds.h proto.h \

src/Makefile

@@ -1491,13 +1491,14 @@ POST_DEFS = $(X_CFLAGS) $(MZSCHEME_CFLAGS) $(EXTRA_DEFS)
 
 ALL_CFLAGS = $(PRE_DEFS) $(CFLAGS) $(PROFILE_CFLAGS) $(SANITIZER_CFLAGS) $(LEAK_CFLAGS) $(ABORT_CFLAGS) $(POST_DEFS)
 
+ALL_IF_CFLAGS = $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(PYTHON3_CFLAGS) $(RUBY_CFLAGS) $(TCL_CFLAGS)
+ALL_IF_CFLAGS_EXTRA = $(LUA_CFLAGS_EXTRA) $(PERL_CFLAGS_EXTRA) $(PYTHON_CFLAGS_EXTRA) $(PYTHON3_CFLAGS_EXTRA) $(RUBY_CFLAGS_EXTRA) $(TCL_CFLAGS_EXTRA)
+
 # Exclude $CFLAGS for osdef.sh, for Mac 10.4 some flags don't work together
 # with "-E".
 OSDEF_CFLAGS = $(PRE_DEFS) $(POST_DEFS)
 
-LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) \
-	      $(RUBY_CFLAGS) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) \
-	      $(PYTHON3_CFLAGS) $(TCL_CFLAGS) $(VTERM_CFLAGS) \
+LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) $(ALL_IF_CFLAGS) $(VTERM_CFLAGS) \
 	      -Dinline= -D__extension__= -Dalloca=alloca
 
 LINT_EXTRA = -D"__attribute__(x)="
@@ -1873,7 +1874,7 @@ OBJ_COMMON = \
 	$(OS_EXTRA_OBJ) \
 	$(NETBEANS_OBJ) \
 	$(CHANNEL_OBJ) \
-	$(XDIFF_OBJS)
+	$(XDIFF_OBJS_USED)
 
 # The files included by tests are not in OBJ_COMMON.
 OBJ_MAIN = \
@@ -3357,7 +3358,7 @@ objects/if_xcmdsrv.o: if_xcmdsrv.c
 	$(CCC) -o $@ if_xcmdsrv.c
 
 objects/if_lua.o: if_lua.c
-	$(CCC_NF) $(LUA_CFLAGS) $(ALL_CFLAGS) -o $@ if_lua.c
+	$(CCC_NF) $(LUA_CFLAGS) $(ALL_CFLAGS) $(LUA_CFLAGS_EXTRA) -o $@ if_lua.c
 
 objects/if_mzsch.o: if_mzsch.c $(MZSCHEME_EXTRA)
 	$(CCC) -o $@ $(MZSCHEME_CFLAGS_EXTRA) if_mzsch.c
@@ -3366,22 +3367,22 @@ mzscheme_base.c:
 	$(MZSCHEME_MZC) --c-mods mzscheme_base.c ++lib scheme/base
 
 objects/if_perl.o: auto/if_perl.c
-	$(CCC_NF) $(PERL_CFLAGS) $(ALL_CFLAGS) -o $@ auto/if_perl.c
+	$(CCC_NF) $(PERL_CFLAGS) $(ALL_CFLAGS) $(PERL_CFLAGS_EXTRA) -o $@ auto/if_perl.c
 
 objects/if_perlsfio.o: if_perlsfio.c
-	$(CCC_NF) $(PERL_CFLAGS) $(ALL_CFLAGS) -o $@ if_perlsfio.c
+	$(CCC_NF) $(PERL_CFLAGS) $(ALL_CFLAGS) $(PERL_CFLAGS_EXTRA) -o $@ if_perlsfio.c
 
 objects/if_python.o: if_python.c if_py_both.h
-	$(CCC_NF) $(PYTHON_CFLAGS) $(PYTHON_CFLAGS_EXTRA) $(ALL_CFLAGS) -o $@ if_python.c
+	$(CCC_NF) $(PYTHON_CFLAGS) $(ALL_CFLAGS) $(PYTHON_CFLAGS_EXTRA) -o $@ if_python.c
 
 objects/if_python3.o: if_python3.c if_py_both.h
-	$(CCC_NF) $(PYTHON3_CFLAGS) $(PYTHON3_CFLAGS_EXTRA) $(ALL_CFLAGS) -o $@ if_python3.c
+	$(CCC_NF) $(PYTHON3_CFLAGS) $(ALL_CFLAGS) $(PYTHON3_CFLAGS_EXTRA) -o $@ if_python3.c
 
 objects/if_ruby.o: if_ruby.c
-	$(CCC_NF) $(RUBY_CFLAGS) $(ALL_CFLAGS) -o $@ if_ruby.c
+	$(CCC_NF) $(RUBY_CFLAGS) $(ALL_CFLAGS) $(RUBY_CFLAGS_EXTRA) -o $@ if_ruby.c
 
 objects/if_tcl.o: if_tcl.c
-	$(CCC_NF) $(TCL_CFLAGS) $(ALL_CFLAGS) -o $@ if_tcl.c
+	$(CCC_NF) $(TCL_CFLAGS) $(ALL_CFLAGS) $(TCL_CFLAGS_EXTRA) -o $@ if_tcl.c
 
 objects/indent.o: indent.c
 	$(CCC) -o $@ indent.c
@@ -3459,10 +3460,10 @@ objects/ops.o: ops.c
 	$(CCC) -o $@ ops.c
 
 objects/option.o: option.c optiondefs.h
-	$(CCC_NF) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(PYTHON3_CFLAGS) $(RUBY_CFLAGS) $(TCL_CFLAGS) $(ALL_CFLAGS) -o $@ option.c
+	$(CCC_NF) $(ALL_IF_CFLAGS) $(ALL_CFLAGS) $(ALL_IF_CFLAGS_EXTRA) -o $@ option.c
 
 objects/optionstr.o: optionstr.c
-	$(CCC_NF) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(PYTHON3_CFLAGS) $(RUBY_CFLAGS) $(TCL_CFLAGS) $(ALL_CFLAGS) -o $@ optionstr.c
+	$(CCC_NF) $(ALL_IF_CFLAGS) $(ALL_CFLAGS) $(ALL_IF_CFLAGS_EXTRA) -o $@ optionstr.c
 
 objects/os_qnx.o: os_qnx.c $(VIM_H_DEPENDENCIES)
 	$(CCC) -o $@ os_qnx.c
@@ -3921,7 +3922,7 @@ objects/highlight.o: highlight.c vim.h protodef.h auto/config.h feature.h \
 objects/if_cscope.o: if_cscope.c vim.h protodef.h auto/config.h feature.h \
  os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \
- proto.h globals.h errors.h if_cscope.h
+ proto.h globals.h errors.h
 objects/if_xcmdsrv.o: if_xcmdsrv.c vim.h protodef.h auto/config.h feature.h \
  os_unix.h auto/osdef.h ascii.h keymap.h termdefs.h macros.h option.h beval.h \
  proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \

src/alloc.c

@@ -151,6 +151,7 @@ alloc(size_t size)
     return lalloc(size, TRUE);
 }
 
+#if defined(FEAT_QUICKFIX) || defined(PROTO)
 /*
  * alloc() with an ID for alloc_fail().
  */
@@ -163,6 +164,7 @@ alloc_id(size_t size, alloc_id_T id UNUSED)
 #endif
     return lalloc(size, TRUE);
 }
+#endif
 
 /*
  * Allocate memory and set all bytes to zero.
@@ -178,6 +180,7 @@ alloc_clear(size_t size)
     return p;
 }
 
+#if defined(FEAT_SIGNS) || defined(PROTO)
 /*
  * Same as alloc_clear() but with allocation id for testing
  */
@@ -190,6 +193,7 @@ alloc_clear_id(size_t size, alloc_id_T id UNUSED)
 #endif
     return alloc_clear(size);
 }
+#endif
 
 /*
  * Allocate memory like lalloc() and set all bytes to zero.
@@ -224,7 +228,7 @@ lalloc(size_t size, int message)
     {
 	// Don't hide this message
 	emsg_silent = 0;
-	iemsg(_("E341: Internal error: lalloc(0, )"));
+	iemsg(_(e_internal_error_lalloc_zero));
 	return NULL;
     }
 
@@ -236,7 +240,7 @@ lalloc(size_t size, int message)
     // if some blocks are released call malloc again.
     for (;;)
     {
-	// Handle three kind of systems:
+	// Handle three kinds of systems:
 	// 1. No check for available memory: Just return.
 	// 2. Slow check for available memory: call mch_avail_mem() after
 	//    allocating KEEP_ROOM amount of memory.
@@ -339,7 +343,7 @@ do_outofmem_msg(size_t size)
 	// message fails, e.g. when setting v:errmsg.
 	did_outofmem_msg = TRUE;
 
-	semsg(_("E342: Out of memory!  (allocating %lu bytes)"), (long_u)size);
+	semsg(_(e_out_of_memory_allocating_nr_bytes), (long_u)size);
 
 	if (starting == NO_SCREEN)
 	    // Not even finished with initializations and already out of
@@ -648,6 +652,7 @@ ga_clear_strings(garray_T *gap)
     ga_clear(gap);
 }
 
+#if defined(FEAT_EVAL) || defined(PROTO)
 /*
  * Copy a growing array that contains a list of strings.
  */
@@ -682,6 +687,7 @@ ga_copy_strings(garray_T *from, garray_T *to)
     to->ga_len = from->ga_len;
     return OK;
 }
+#endif
 
 /*
  * Initialize a growing array.	Don't forget to set ga_itemsize and
@@ -696,10 +702,10 @@ ga_init(garray_T *gap)
 }
 
     void
-ga_init2(garray_T *gap, int itemsize, int growsize)
+ga_init2(garray_T *gap, size_t itemsize, int growsize)
 {
     ga_init(gap);
-    gap->ga_itemsize = itemsize;
+    gap->ga_itemsize = (int)itemsize;
     gap->ga_growsize = growsize;
 }
 
@@ -783,7 +789,7 @@ ga_concat_strings(garray_T *gap, char *sep)
  * When out of memory nothing changes and FAIL is returned.
  */
     int
-ga_add_string(garray_T *gap, char_u *p)
+ga_copy_string(garray_T *gap, char_u *p)
 {
     char_u *cp = vim_strsave(p);
 
@@ -799,6 +805,19 @@ ga_add_string(garray_T *gap, char_u *p)
     return OK;
 }
 
+/*
+ * Add string "p" to "gap".
+ * When out of memory "p" is freed and FAIL is returned.
+ */
+    int
+ga_add_string(garray_T *gap, char_u *p)
+{
+    if (ga_grow(gap, 1) == FAIL)
+	return FAIL;
+    ((char_u **)(gap->ga_data))[gap->ga_len++] = p;
+    return OK;
+}
+
 /*
  * Concatenate a string to a growarray which contains bytes.
  * When "s" is NULL does not do anything.

src/arglist.c

@@ -51,7 +51,7 @@ alist_clear(alist_T *al)
     void
 alist_init(alist_T *al)
 {
-    ga_init2(&al->al_ga, (int)sizeof(aentry_T), 5);
+    ga_init2(&al->al_ga, sizeof(aentry_T), 5);
 }
 
 /*
@@ -275,7 +275,7 @@ do_one_arg(char_u *str)
     static int
 get_arglist(garray_T *gap, char_u *str, int escaped)
 {
-    ga_init2(gap, (int)sizeof(char_u *), 20);
+    ga_init2(gap, sizeof(char_u *), 20);
     while (*str != NUL)
     {
 	if (ga_grow(gap, 1) == FAIL)
@@ -460,7 +460,7 @@ do_arglist(
 	    vim_regfree(regmatch.regprog);
 	    vim_free(p);
 	    if (!didone)
-		semsg(_(e_nomatch2), ((char_u **)new_ga.ga_data)[i]);
+		semsg(_(e_no_match_str_2), ((char_u **)new_ga.ga_data)[i]);
 	}
 	ga_clear(&new_ga);
     }
@@ -471,7 +471,7 @@ do_arglist(
 	ga_clear(&new_ga);
 	if (i == FAIL || exp_count == 0)
 	{
-	    emsg(_(e_nomatch));
+	    emsg(_(e_no_match));
 	    return FAIL;
 	}
 
@@ -673,11 +673,11 @@ do_argfile(exarg_T *eap, int argn)
     if (argn < 0 || argn >= ARGCOUNT)
     {
 	if (ARGCOUNT <= 1)
-	    emsg(_("E163: There is only one file to edit"));
+	    emsg(_(e_there_is_only_one_file_to_edit));
 	else if (argn < 0)
-	    emsg(_("E164: Cannot go before first file"));
+	    emsg(_(e_cannot_go_before_first_file));
 	else
-	    emsg(_("E165: Cannot go beyond last file"));
+	    emsg(_(e_cannot_go_beyond_last_file));
     }
     else
     {
@@ -839,7 +839,7 @@ ex_argdelete(exarg_T *eap)
 	{
 	    if (curwin->w_arg_idx >= ARGCOUNT)
 	    {
-		emsg(_("E610: No argument to delete"));
+		emsg(_(e_no_argument_to_delete));
 		return;
 	    }
 	    eap->line1 = eap->line2 = curwin->w_arg_idx + 1;
@@ -850,7 +850,7 @@ ex_argdelete(exarg_T *eap)
 	n = eap->line2 - eap->line1 + 1;
 	if (*eap->arg != NUL)
 	    // Can't have both a range and an argument.
-	    emsg(_(e_invarg));
+	    emsg(_(e_invalid_argument));
 	else if (n <= 0)
 	{
 	    // Don't give an error for ":%argdel" if the list is empty.
@@ -1129,7 +1129,7 @@ do_arg_all(
 			else if (wpnext->w_frame->fr_parent
 						 != curwin->w_frame->fr_parent)
 			{
-			    emsg(_("E249: window layout changed unexpectedly"));
+			    emsg(_(e_window_layout_changed_unexpectedly));
 			    i = count;
 			    break;
 			}

src/auto/configure

@@ -662,12 +662,14 @@ CHANNEL_SRC
 NETBEANS_OBJ
 NETBEANS_SRC
 RUBY_LIBS
+RUBY_CFLAGS_EXTRA
 RUBY_CFLAGS
 RUBY_PRO
 RUBY_OBJ
 RUBY_SRC
 vi_cv_path_ruby
 TCL_LIBS
+TCL_CFLAGS_EXTRA
 TCL_CFLAGS
 TCL_PRO
 TCL_OBJ
@@ -675,15 +677,18 @@ TCL_SRC
 vi_cv_path_tcl
 PYTHON3_OBJ
 PYTHON3_SRC
+PYTHON3_CFLAGS_EXTRA
 PYTHON3_CFLAGS
 PYTHON3_LIBS
 vi_cv_path_python3
 PYTHON_OBJ
 PYTHON_SRC
+PYTHON_CFLAGS_EXTRA
 PYTHON_CFLAGS
 PYTHON_LIBS
 vi_cv_path_python
 PERL_LIBS
+PERL_CFLAGS_EXTRA
 PERL_CFLAGS
 PERL_PRO
 PERL_OBJ
@@ -700,6 +705,7 @@ MZSCHEME_PRO
 MZSCHEME_OBJ
 MZSCHEME_SRC
 vi_cv_path_mzscheme
+LUA_CFLAGS_EXTRA
 LUA_CFLAGS
 LUA_LIBS
 LUA_PRO
@@ -708,6 +714,7 @@ LUA_SRC
 vi_cv_path_plain_lua
 vi_cv_path_luajit
 vi_cv_path_lua
+XDIFF_OBJS_USED
 compiledby
 dogvimdiff
 dovimdiff
@@ -5249,6 +5256,12 @@ esac
 
 
 
+if test "x$features" = "xtiny" -o "x$features" = "xsmall"; then
+  has_eval=no
+else
+  has_eval=yes
+fi
+
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking --with-compiledby argument" >&5
 $as_echo_n "checking --with-compiledby argument... " >&6; }
 
@@ -5299,6 +5312,20 @@ else
 $as_echo "yes" >&6; }
 fi
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking diff feature" >&5
+$as_echo_n "checking diff feature... " >&6; }
+if test "x$features" = "xtiny" -o "x$features" = "xsmall"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled in $features version" >&5
+$as_echo "disabled in $features version" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: enabled" >&5
+$as_echo "enabled" >&6; }
+  $as_echo "#define FEAT_DIFF 1" >>confdefs.h
+
+  XDIFF_OBJS_USED="\$(XDIFF_OBJS)"
+
+fi
+
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking --enable-luainterp argument" >&5
 $as_echo_n "checking --enable-luainterp argument... " >&6; }
 # Check whether --enable-luainterp was given.
@@ -5312,7 +5339,7 @@ fi
 $as_echo "$enable_luainterp" >&6; }
 
 if test "$enable_luainterp" = "yes" -o "$enable_luainterp" = "dynamic"; then
-  if test "x$features" = "xtiny" -o "x$features" = "xsmall"; then
+  if test "$has_eval" = "no"; then
     as_fn_error $? "cannot use Lua with tiny or small features" "$LINENO" 5
   fi
 
@@ -5658,6 +5685,7 @@ $as_echo "yes" >&6; }
 
 
 
+
 fi
 
 
@@ -6081,7 +6109,7 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_perlinterp" >&5
 $as_echo "$enable_perlinterp" >&6; }
 if test "$enable_perlinterp" = "yes" -o "$enable_perlinterp" = "dynamic"; then
-  if test "x$features" = "xtiny" -o "x$features" = "xsmall"; then
+  if test "$has_eval" = "no"; then
     as_fn_error $? "cannot use Perl with tiny or small features" "$LINENO" 5
   fi
 
@@ -6273,6 +6301,7 @@ fi
 
 
 
+
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking --enable-pythoninterp argument" >&5
 $as_echo_n "checking --enable-pythoninterp argument... " >&6; }
 # Check whether --enable-pythoninterp was given.
@@ -6285,7 +6314,7 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_pythoninterp" >&5
 $as_echo "$enable_pythoninterp" >&6; }
 if test "$enable_pythoninterp" = "yes" -o "$enable_pythoninterp" = "dynamic"; then
-  if test "x$features" = "xtiny" -o "x$features" = "xsmall"; then
+  if test "$has_eval" = "no"; then
     as_fn_error $? "cannot use Python with tiny or small features" "$LINENO" 5
   fi
 
@@ -6623,6 +6652,7 @@ fi
 
 
 
+
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking --enable-python3interp argument" >&5
 $as_echo_n "checking --enable-python3interp argument... " >&6; }
 # Check whether --enable-python3interp was given.
@@ -6635,7 +6665,7 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_python3interp" >&5
 $as_echo "$enable_python3interp" >&6; }
 if test "$enable_python3interp" = "yes" -o "$enable_python3interp" = "dynamic"; then
-  if test "x$features" = "xtiny" -o "x$features" = "xsmall"; then
+  if test "$has_eval" = "no"; then
     as_fn_error $? "cannot use Python with tiny or small features" "$LINENO" 5
   fi
 
@@ -6969,6 +6999,7 @@ fi
 
 
 
+
 if test "$python_ok" = yes && test "$python3_ok" = yes; then
   $as_echo "#define DYNAMIC_PYTHON 1" >>confdefs.h
 
@@ -7549,6 +7580,7 @@ fi
 
 
 
+
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking --enable-rubyinterp argument" >&5
 $as_echo_n "checking --enable-rubyinterp argument... " >&6; }
 # Check whether --enable-rubyinterp was given.
@@ -7561,7 +7593,7 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_rubyinterp" >&5
 $as_echo "$enable_rubyinterp" >&6; }
 if test "$enable_rubyinterp" = "yes" -o "$enable_rubyinterp" = "dynamic"; then
-  if test "x$features" = "xtiny" -o "x$features" = "xsmall"; then
+  if test "$has_eval" = "no"; then
     as_fn_error $? "cannot use Ruby with tiny or small features" "$LINENO" 5
   fi
 
@@ -7712,6 +7744,7 @@ fi
 
 
 
+
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking --enable-cscope argument" >&5
 $as_echo_n "checking --enable-cscope argument... " >&6; }
 # Check whether --enable-cscope was given.
@@ -7738,7 +7771,7 @@ else
 fi
 
 if test "$enable_netbeans" = "yes"; then
-  if test "x$features" = "xtiny" -o "x$features" = "xsmall"; then
+  if test "$has_eval" = "no"; then
     { $as_echo "$as_me:${as_lineno-$LINENO}: result: cannot use NetBeans with tiny or small features" >&5
 $as_echo "cannot use NetBeans with tiny or small features" >&6; }
     enable_netbeans="no"
@@ -7761,7 +7794,7 @@ else
 fi
 
 if test "$enable_channel" = "yes"; then
-  if test "x$features" = "xtiny" -o "x$features" = "xsmall"; then
+  if test "$has_eval" = "no"; then
     { $as_echo "$as_me:${as_lineno-$LINENO}: result: cannot use channels with tiny or small features" >&5
 $as_echo "cannot use channels with tiny or small features" >&6; }
     enable_channel="no"
@@ -8065,7 +8098,7 @@ else
 fi
 
 if test "$enable_terminal" = "yes" || test "$enable_terminal" = "auto" -a "x$features" = "xhuge" ; then
-  if test "x$features" = "xtiny" -o "x$features" = "xsmall"; then
+  if test "$has_eval" = "no"; then
     { $as_echo "$as_me:${as_lineno-$LINENO}: result: cannot use terminal emulator with tiny or small features" >&5
 $as_echo "cannot use terminal emulator with tiny or small features" >&6; }
     enable_terminal="no"
@@ -13024,8 +13057,14 @@ $as_echo "Defaulting to no" >&6; }
     enable_canberra="no"
   fi
 else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_canberra" >&5
+  if test "$enable_canberra" = "yes" -a "$has_eval" = "no"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: cannot use sound with tiny or small features" >&5
+$as_echo "cannot use sound with tiny or small features" >&6; }
+    enable_canberra="no"
+  else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_canberra" >&5
 $as_echo "$enable_canberra" >&6; }
+  fi
 fi
 if test "$enable_canberra" = "yes"; then
   if test "x$PKG_CONFIG" != "xno"; then
@@ -13040,7 +13079,7 @@ if test "$enable_canberra" = "yes"; then
 $as_echo_n "checking for libcanberra... " >&6; }
   ac_save_CFLAGS="$CFLAGS"
   ac_save_LIBS="$LIBS"
-  if `echo "$CFLAGS" | grep -v "$canberra_cflags" >/dev/null`; then
+  if `echo "$CFLAGS" | grep -v "$canberra_cflags" 2>/dev/null`; then
     CFLAGS="$CFLAGS $canberra_cflags"
   fi
   LIBS="$LIBS $canberra_lib"

src/autocmd.c

@@ -515,9 +515,9 @@ au_del_group(char_u *name)
 
     i = au_find_group(name);
     if (i == AUGROUP_ERROR)	// the group doesn't exist
-	semsg(_("E367: No such group: \"%s\""), name);
+	semsg(_(e_no_such_group_str), name);
     else if (i == current_augroup)
-	emsg(_("E936: Cannot delete the current group"));
+	emsg(_(e_cannot_delete_current_group));
     else
     {
 	event_T	event;
@@ -580,7 +580,7 @@ do_augroup(char_u *arg, int del_group)
     if (del_group)
     {
 	if (*arg == NUL)
-	    emsg(_(e_argreq));
+	    emsg(_(e_argument_required));
 	else
 	    au_del_group(arg);
     }
@@ -687,7 +687,7 @@ find_end_event(
     {
 	if (arg[1] && !VIM_ISWHITE(arg[1]))
 	{
-	    semsg(_("E215: Illegal character after *: %s"), arg);
+	    semsg(_(e_illegal_character_after_star_str), arg);
 	    return NULL;
 	}
 	pat = arg + 1;
@@ -699,9 +699,9 @@ find_end_event(
 	    if ((int)event_name2nr(pat, &p) >= NUM_EVENTS)
 	    {
 		if (have_group)
-		    semsg(_("E216: No such event: %s"), pat);
+		    semsg(_(e_no_such_event_str), pat);
 		else
-		    semsg(_("E216: No such group or event: %s"), pat);
+		    semsg(_(e_no_such_group_or_event_str), pat);
 		return NULL;
 	    }
 	}
@@ -911,7 +911,7 @@ do_autocmd(exarg_T *eap, char_u *arg_in, int forceit)
 		if (STRNCMP(cmd, "++once", 6) == 0 && VIM_ISWHITE(cmd[6]))
 		{
 		    if (once)
-			semsg(_(e_duparg2), "++once");
+			semsg(_(e_duplicate_argument_str), "++once");
 		    once = TRUE;
 		    cmd = skipwhite(cmd + 6);
 		}
@@ -920,7 +920,7 @@ do_autocmd(exarg_T *eap, char_u *arg_in, int forceit)
 		if ((STRNCMP(cmd, "++nested", 8) == 0 && VIM_ISWHITE(cmd[8])))
 		{
 		    if (nested)
-			semsg(_(e_duparg2), "++nested");
+			semsg(_(e_duplicate_argument_str), "++nested");
 		    nested = TRUE;
 		    cmd = skipwhite(cmd + 8);
 		}
@@ -929,7 +929,7 @@ do_autocmd(exarg_T *eap, char_u *arg_in, int forceit)
 		if (STRNCMP(cmd, "nested", 6) == 0 && VIM_ISWHITE(cmd[6]))
 		{
 		    if (nested)
-			semsg(_(e_duparg2), "nested");
+			semsg(_(e_duplicate_argument_str), "nested");
 		    nested = TRUE;
 		    cmd = skipwhite(cmd + 6);
 		}
@@ -1205,8 +1205,7 @@ do_autocmd_event(
 		if (is_buflocal && (buflocal_nr == 0
 				      || buflist_findnr(buflocal_nr) == NULL))
 		{
-		    semsg(_("E680: <buffer=%d>: invalid buffer number "),
-								 buflocal_nr);
+		    semsg(_(e_buffer_nr_invalid_buffer_number), buflocal_nr);
 		    return FAIL;
 		}
 
@@ -1329,7 +1328,7 @@ do_doautocmd(
 
     if (*arg == '*')
     {
-	emsg(_("E217: Can't execute autocommands for ALL events"));
+	emsg(_(e_cant_execute_autocommands_for_all_events));
 	return FAIL;
     }
 
@@ -1425,8 +1424,6 @@ ex_doautoall(exarg_T *eap)
 	if (call_do_modelines && did_aucmd)
 	    do_modelines(0);
     }
-
-    check_cursor();	    // just in case lines got deleted
 }
 
 /*
@@ -1521,7 +1518,10 @@ aucmd_prepbuf(
 	p_acd = FALSE;
 #endif
 
+	// no redrawing and don't set the window title
+	++RedrawingDisabled;
 	(void)win_split_ins(0, WSP_TOP, aucmd_win, 0);
+	--RedrawingDisabled;
 	(void)win_comp_pos();   // recompute window positions
 	p_ea = save_ea;
 #ifdef FEAT_AUTOCHDIR
@@ -1533,6 +1533,10 @@ aucmd_prepbuf(
     curbuf = buf;
     aco->new_curwin_id = curwin->w_id;
     set_bufref(&aco->new_curbuf, curbuf);
+
+    // disable the Visual area, the position may be invalid in another buffer
+    aco->save_VIsual_active = VIsual_active;
+    VIsual_active = FALSE;
 }
 
 /*
@@ -1657,6 +1661,11 @@ win_found:
 	    check_cursor();
 	}
     }
+
+    check_cursor();	    // just in case lines got deleted
+    VIsual_active = aco->save_VIsual_active;
+    if (VIsual_active)
+	check_pos(curbuf, &VIsual);
 }
 
 static int	autocmd_nested = FALSE;
@@ -1942,7 +1951,7 @@ apply_autocmds_group(
      */
     if (nesting == 10)
     {
-	emsg(_("E218: autocommand nesting too deep"));
+	emsg(_(e_autocommand_nesting_too_deep));
 	goto BYPASS_AU;
     }
 

src/beval.c

@@ -259,6 +259,8 @@ general_beval_cb(BalloonEval *beval, int state UNUSED)
 						    : wp->w_buffer->b_p_bexpr;
 	if (*bexpr != NUL)
 	{
+	    sctx_T	save_sctx = current_sctx;
+
 	    // Convert window pointer to number.
 	    for (cw = firstwin; cw != wp; cw = cw->w_next)
 		++winnr;
@@ -284,6 +286,16 @@ general_beval_cb(BalloonEval *beval, int state UNUSED)
 		++sandbox;
 	    ++textwinlock;
 
+	    if (bexpr == p_bexpr)
+	    {
+		sctx_T *sp = get_option_sctx("balloonexpr");
+
+		if (sp != NULL)
+		    current_sctx = *sp;
+	    }
+	    else
+		current_sctx = curbuf->b_p_script_ctx[BV_BEXPR];
+
 	    vim_free(result);
 	    result = eval_to_string(bexpr, TRUE);
 
@@ -300,6 +312,7 @@ general_beval_cb(BalloonEval *beval, int state UNUSED)
 	    if (use_sandbox)
 		--sandbox;
 	    --textwinlock;
+	    current_sctx = save_sctx;
 
 	    set_vim_var_string(VV_BEVAL_TEXT, NULL, -1);
 	    if (result != NULL && result[0] != NUL)

src/blob.c

@@ -350,7 +350,7 @@ blob_slice_or_index(
 	}
 	else
 	{
-	    semsg(_(e_blobidx), n1);
+	    semsg(_(e_blob_index_out_of_range_nr), n1);
 	    return FAIL;
 	}
     }
@@ -366,7 +366,7 @@ check_blob_index(long bloblen, varnumber_T n1, int quiet)
     if (n1 < 0 || n1 > bloblen)
     {
 	if (!quiet)
-	    semsg(_(e_blobidx), n1);
+	    semsg(_(e_blob_index_out_of_range_nr), n1);
 	return FAIL;
     }
     return OK;
@@ -381,7 +381,7 @@ check_blob_range(long bloblen, varnumber_T n1, varnumber_T n2, int quiet)
     if (n2 < 0 || n2 >= bloblen || n2 < n1)
     {
 	if (!quiet)
-	    semsg(_(e_blobidx), n2);
+	    semsg(_(e_blob_index_out_of_range_nr), n2);
 	return FAIL;
     }
     return OK;
@@ -399,7 +399,7 @@ blob_set_range(blob_T *dest, long n1, long n2, typval_T *src)
 
     if (n2 - n1 + 1 != blob_len(src->vval.v_blob))
     {
-	emsg(_("E972: Blob value does not have the right number of bytes"));
+	emsg(_(e_blob_value_does_not_have_right_number_of_bytes));
 	return FAIL;
     }
 
@@ -465,7 +465,7 @@ blob_remove(typval_T *argvars, typval_T *rettv, char_u *arg_errmsg)
 	idx = len + idx;
     if (idx < 0 || idx >= len)
     {
-	semsg(_(e_blobidx), idx);
+	semsg(_(e_blob_index_out_of_range_nr), idx);
 	return;
     }
     if (argvars[2].v_type == VAR_UNKNOWN)
@@ -487,7 +487,7 @@ blob_remove(typval_T *argvars, typval_T *rettv, char_u *arg_errmsg)
 	end = len + end;
     if (end >= len || idx > end)
     {
-	semsg(_(e_blobidx), end);
+	semsg(_(e_blob_index_out_of_range_nr), end);
 	return;
     }
     newblob = blob_alloc();
@@ -563,7 +563,7 @@ blob_filter_map(
 	if (newtv.v_type != VAR_NUMBER && newtv.v_type != VAR_BOOL)
 	{
 	    clear_tv(&newtv);
-	    emsg(_(e_invalblob));
+	    emsg(_(e_invalid_operation_for_blob));
 	    break;
 	}
 	if (filtermap != FILTERMAP_FILTER)
@@ -614,7 +614,7 @@ blob_insert_func(typval_T *argvars, typval_T *rettv)
 	    return;		// type error; errmsg already given
 	if (before < 0 || before > len)
 	{
-	    semsg(_(e_invarg2), tv_get_string(&argvars[2]));
+	    semsg(_(e_invalid_argument_str), tv_get_string(&argvars[2]));
 	    return;
 	}
     }
@@ -623,7 +623,7 @@ blob_insert_func(typval_T *argvars, typval_T *rettv)
 	return;
     if (val < 0 || val > 255)
     {
-	semsg(_(e_invarg2), tv_get_string(&argvars[1]));
+	semsg(_(e_invalid_argument_str), tv_get_string(&argvars[1]));
 	return;
     }
 
@@ -660,7 +660,7 @@ blob_reduce(
     {
 	if (b == NULL || b->bv_ga.ga_len == 0)
 	{
-	    semsg(_(e_reduceempty), "Blob");
+	    semsg(_(e_reduce_of_an_empty_str_with_no_initial_value), "Blob");
 	    return;
 	}
 	initial.v_type = VAR_NUMBER;

src/blowfish.c

@@ -416,7 +416,7 @@ bf_key_init(
     keylen = (int)STRLEN(key) / 2;
     if (keylen == 0)
     {
-	iemsg(_("E831: bf_key_init() called with empty password"));
+	iemsg(_(e_bf_key_init_called_with_empty_password));
 	return;
     }
     for (i = 0; i < keylen; i++)
@@ -519,7 +519,7 @@ bf_self_test(void)
     // warning.
     if (ui != 0xffffffffUL || ui + 1 != 0) {
 	err++;
-	emsg(_("E820: sizeof(uint32_t) != 4"));
+	emsg(_(e_sizeof_uint32_isnot_four));
     }
 
     if (!bf_check_tables(pax_init, sbx_init, 0x6ffa520a))
@@ -540,7 +540,7 @@ bf_self_test(void)
 	if (memcmp(bk.uc, bf_test_data[i].cryptxt, 8) != 0)
 	{
 	    if (err == 0 && memcmp(bk.uc, bf_test_data[i].badcryptxt, 8) == 0)
-		emsg(_("E817: Blowfish big/little endian use wrong"));
+		emsg(_(e_blowfish_big_little_endian_use_wrong));
 	    err++;
 	}
     }
@@ -651,7 +651,7 @@ crypt_blowfish_init(
     state->method_state = bfs;
 
     // "blowfish" uses a 64 byte buffer, causing it to repeat 8 byte groups 8
-    // times.  "blowfish2" uses a 8 byte buffer to avoid repeating.
+    // times.  "blowfish2" uses an 8 byte buffer to avoid repeating.
     bfs->cfb_len = state->method_nr == CRYPT_M_BF ? BF_MAX_CFB_LEN : BF_BLOCK;
 
     if (blowfish_self_test() == FAIL)
@@ -672,12 +672,12 @@ blowfish_self_test(void)
 {
     if (sha256_self_test() == FAIL)
     {
-	emsg(_("E818: sha256 test failed"));
+	emsg(_(e_sha256_test_failed));
 	return FAIL;
     }
     if (bf_self_test() == FAIL)
     {
-	emsg(_("E819: Blowfish test failed"));
+	emsg(_(e_blowfish_test_failed));
 	return FAIL;
     }
     return OK;

src/buffer.c

@@ -63,7 +63,6 @@ static void	clear_wininfo(buf_T *buf);
 static char *msg_loclist = N_("[Location List]");
 static char *msg_qflist = N_("[Quickfix List]");
 #endif
-static char *e_auabort = N_("E855: Autocommands caused command to abort");
 
 // Number of times free_buffer() was called.
 static int	buf_free_count = 0;
@@ -139,6 +138,7 @@ read_buffer(
     return retval;
 }
 
+#if defined(FEAT_EVAL) || defined(PROTO)
 /*
  * Ensure buffer "buf" is loaded.  Does not trigger the swap-exists action.
  */
@@ -155,6 +155,7 @@ buffer_ensure_loaded(buf_T *buf)
 	aucmd_restbuf(&aco);
     }
 }
+#endif
 
 /*
  * Open current buffer, that is: open the memfile and read the file into
@@ -427,7 +428,7 @@ buf_hashtab_add(buf_T *buf)
 {
     sprintf((char *)buf->b_key, "%x", buf->b_fnum);
     if (hash_add(&buf_hashtab, buf->b_key) == FAIL)
-	emsg(_("E931: Buffer cannot be registered"));
+	emsg(_(e_buffer_cannot_be_registered));
 }
 
     static void
@@ -461,8 +462,7 @@ can_unload_buffer(buf_T *buf)
 	    }
     }
     if (!can_unload)
-	semsg(_("E937: Attempt to delete a buffer that is in use: %s"),
-								 buf->b_fname);
+	semsg(_(e_attempt_to_delete_buffer_that_is_in_use_str), buf->b_fname);
     return can_unload;
 }
 
@@ -594,7 +594,7 @@ close_buffer(
 	{
 	    // Autocommands deleted the buffer.
 aucmd_abort:
-	    emsg(_(e_auabort));
+	    emsg(_(e_autocommands_caused_command_to_abort));
 	    return FALSE;
 	}
 	--buf->b_locked;
@@ -1610,7 +1610,7 @@ do_bufdel(
 	if (addr_count == 2)
 	{
 	    if (*arg)		// both range and argument is not allowed
-		return ex_errmsg(e_trailing_arg, arg);
+		return ex_errmsg(e_trailing_characters_str, arg);
 	    bnr = start_bnr;
 	}
 	else	// addr_count == 1
@@ -1660,11 +1660,11 @@ do_bufdel(
 	if (deleted == 0)
 	{
 	    if (command == DOBUF_UNLOAD)
-		STRCPY(IObuff, _("E515: No buffers were unloaded"));
+		STRCPY(IObuff, _(e_no_buffers_were_unloaded));
 	    else if (command == DOBUF_DEL)
-		STRCPY(IObuff, _("E516: No buffers were deleted"));
+		STRCPY(IObuff, _(e_no_buffers_were_deleted));
 	    else
-		STRCPY(IObuff, _("E517: No buffers were wiped out"));
+		STRCPY(IObuff, _(e_no_buffers_were_wiped_out));
 	    errormsg = (char *)IObuff;
 	}
 	else if (deleted >= p_report)
@@ -1744,7 +1744,11 @@ set_curbuf(buf_T *buf, int action)
 	{
 	    win_T  *previouswin = curwin;
 
-	    if (prevbuf == curbuf)
+	    // Do not sync when in Insert mode and the buffer is open in
+	    // another window, might be a timer doing something in another
+	    // window.
+	    if (prevbuf == curbuf
+			 && ((State & INSERT) == 0 || curbuf->b_nwindows <= 1))
 		u_sync(FALSE);
 	    close_buffer(prevbuf == curwin->w_buffer ? curwin : NULL, prevbuf,
 		    unload ? action : (action == DOBUF_GOTO
@@ -1823,7 +1827,7 @@ enter_buffer(buf_T *buf)
     if (curbuf->b_ml.ml_mfp == NULL)	// need to load the file
     {
 	// If there is no filetype, allow for detecting one.  Esp. useful for
-	// ":ball" used in a autocommand.  If there already is a filetype we
+	// ":ball" used in an autocommand.  If there already is a filetype we
 	// might prefer to keep it.
 	if (*curbuf->b_p_ft == NUL)
 	    did_filetype = FALSE;
@@ -1905,7 +1909,7 @@ no_write_message(void)
 {
 #ifdef FEAT_TERMINAL
     if (term_job_running(curbuf->b_term))
-	emsg(_("E948: Job still running (add ! to end the job)"));
+	emsg(_(e_job_still_running_add_bang_to_end_the_job));
     else
 #endif
 	emsg(_(e_no_write_since_last_change_add_bang_to_override));
@@ -1916,7 +1920,7 @@ no_write_message_nobang(buf_T *buf UNUSED)
 {
 #ifdef FEAT_TERMINAL
     if (term_job_running(buf->b_term))
-	emsg(_("E948: Job still running"));
+	emsg(_(e_job_still_running));
     else
 #endif
 	emsg(_(e_no_write_since_last_change));
@@ -2269,8 +2273,9 @@ free_buf_options(
 #endif
 #ifdef FEAT_CRYPT
 # ifdef FEAT_SODIUM
-    if (buf->b_p_key != NULL && (crypt_get_method_nr(buf) == CRYPT_M_SOD))
-	sodium_munlock(buf->b_p_key, STRLEN(buf->b_p_key));
+    if ((buf->b_p_key != NULL) && (*buf->b_p_key != NUL) &&
+				(crypt_get_method_nr(buf) == CRYPT_M_SOD))
+	crypt_sodium_munlock(buf->b_p_key, STRLEN(buf->b_p_key));
 # endif
     clear_string_option(&buf->b_p_key);
 #endif
@@ -4157,7 +4162,7 @@ build_stl_str_hl(
 	tv.vval.v_number = wp->w_id;
 	set_var((char_u *)"g:statusline_winid", &tv, FALSE);
 
-	usefmt = eval_to_string_safe(fmt + 2, use_sandbox);
+	usefmt = eval_to_string_safe(fmt + 2, use_sandbox, FALSE);
 	if (usefmt == NULL)
 	    usefmt = fmt;
 
@@ -4541,7 +4546,7 @@ build_stl_str_hl(
 	    if (curwin != save_curwin)
 		VIsual_active = FALSE;
 
-	    str = eval_to_string_safe(p, use_sandbox);
+	    str = eval_to_string_safe(p, use_sandbox, FALSE);
 
 	    curwin = save_curwin;
 	    curbuf = save_curbuf;
@@ -4610,15 +4615,7 @@ build_stl_str_hl(
 
 	case STL_VIRTCOL:
 	case STL_VIRTCOL_ALT:
-	    // In list mode virtcol needs to be recomputed
-	    virtcol = wp->w_virtcol;
-	    if (wp->w_p_list && wp->w_lcs_chars.tab1 == NUL)
-	    {
-		wp->w_p_list = FALSE;
-		getvcol(wp, &wp->w_cursor, NULL, &virtcol, NULL);
-		wp->w_p_list = TRUE;
-	    }
-	    ++virtcol;
+	    virtcol = wp->w_virtcol + 1;
 	    // Don't display %V if it's the same as %c.
 	    if (opt == STL_VIRTCOL_ALT
 		    && (virtcol == (colnr_T)(!(State & INSERT) && empty_line
@@ -5031,7 +5028,7 @@ build_stl_str_hl(
 	sp->userhl = 0;
     }
 
-    // When inside update_screen we do not want redrawing a stausline, ruler,
+    // When inside update_screen we do not want redrawing a statusline, ruler,
     // title, etc. to trigger another redraw, it may cause an endless loop.
     if (updating_screen)
     {
@@ -5611,6 +5608,7 @@ bt_prompt(buf_T *buf)
     return buf != NULL && buf->b_p_bt[0] == 'p' && buf->b_p_bt[1] == 'r';
 }
 
+#if defined(FEAT_PROP_POPUP) || defined(PROTO)
 /*
  * Return TRUE if "buf" is a buffer for a popup window.
  */
@@ -5620,6 +5618,7 @@ bt_popup(buf_T *buf)
     return buf != NULL && buf->b_p_bt != NULL
 	&& buf->b_p_bt[0] == 'p' && buf->b_p_bt[1] == 'o';
 }
+#endif
 
 /*
  * Return TRUE if "buf" is a "nofile", "acwrite", "terminal" or "prompt"
@@ -5634,6 +5633,7 @@ bt_nofilename(buf_T *buf)
 	    || buf->b_p_bt[0] == 'p');
 }
 
+#if defined(FEAT_QUICKFIX) || defined(PROTO)
 /*
  * Return TRUE if "buf" has 'buftype' set to "nofile".
  */
@@ -5642,6 +5642,7 @@ bt_nofile(buf_T *buf)
 {
     return buf != NULL && buf->b_p_bt[0] == 'n' && buf->b_p_bt[2] == 'f';
 }
+#endif
 
 /*
  * Return TRUE if "buf" is a "nowrite", "nofile", "terminal" or "prompt"
@@ -5661,7 +5662,7 @@ bt_dontwrite_msg(buf_T *buf)
 {
     if (bt_dontwrite(buf))
     {
-	emsg(_("E382: Cannot write, 'buftype' option is set"));
+	emsg(_(e_cannot_write_buftype_option_is_set));
 	return TRUE;
     }
     return FALSE;

src/bufwrite.c

@@ -667,7 +667,6 @@ buf_write(
     int		    prev_got_int = got_int;
     int		    checking_conversion;
     int		    file_readonly = FALSE;  // overwritten file is read-only
-    static char	    *err_readonly = "is read-only (cannot override: \"W\" in 'cpoptions')";
 #if defined(UNIX)			    // XXX fix me sometime?
     int		    made_writable = FALSE;  // 'w' bit has been set
 #endif
@@ -701,7 +700,7 @@ buf_write(
     {
 	// This can happen during startup when there is a stray "w" in the
 	// vimrc file.
-	emsg(_(e_emptybuf));
+	emsg(_(e_empty_buffer));
 	return FAIL;
     }
 
@@ -897,7 +896,7 @@ buf_write(
 	    --no_wait_return;
 	    msg_scroll = msg_save;
 	    if (nofile_err)
-		emsg(_("E676: No matching autocommands for acwrite buffer"));
+		emsg(_(e_no_matching_autocommands_for_acwrite_buffer));
 
 	    if (nofile_err
 #ifdef FEAT_EVAL
@@ -932,7 +931,7 @@ buf_write(
 #ifdef FEAT_EVAL
 	    if (!aborting())
 #endif
-		emsg(_("E203: Autocommands deleted or unloaded buffer to be written"));
+		emsg(_(e_autocommands_deleted_or_unloaded_buffer_to_be_written));
 	    return FAIL;
 	}
 
@@ -953,7 +952,7 @@ buf_write(
 		{
 		    --no_wait_return;
 		    msg_scroll = msg_save;
-		    emsg(_("E204: Autocommand changed number of lines in unexpected way"));
+		    emsg(_(e_autocommands_changed_number_of_lines_in_unexpected_way));
 		    return FAIL;
 		}
 	    }
@@ -995,7 +994,7 @@ buf_write(
 	    else
 	    {
 		errnum = (char_u *)"E656: ";
-		errmsg = (char_u *)_("NetBeans disallows writes of unmodified buffers");
+		errmsg = (char_u *)_(e_netbeans_disallows_writes_of_unmodified_buffers);
 		buffer = NULL;
 		goto fail;
 	    }
@@ -1003,7 +1002,7 @@ buf_write(
 	else
 	{
 	    errnum = (char_u *)"E657: ";
-	    errmsg = (char_u *)_("Partial writes disallowed for NetBeans buffers");
+	    errmsg = (char_u *)_(e_partial_writes_disallowed_for_netbeans_buffers);
 	    buffer = NULL;
 	    goto fail;
 	}
@@ -1050,13 +1049,13 @@ buf_write(
 	    if (S_ISDIR(st_old.st_mode))
 	    {
 		errnum = (char_u *)"E502: ";
-		errmsg = (char_u *)_("is a directory");
+		errmsg = (char_u *)_(e_is_a_directory);
 		goto fail;
 	    }
 	    if (mch_nodetype(fname) != NODE_WRITABLE)
 	    {
 		errnum = (char_u *)"E503: ";
-		errmsg = (char_u *)_("is not a file or writable device");
+		errmsg = (char_u *)_(e_is_not_file_or_writable_device);
 		goto fail;
 	    }
 	    // It's a device of some kind (or a fifo) which we can write to
@@ -1072,7 +1071,7 @@ buf_write(
     if (c == NODE_OTHER)
     {
 	errnum = (char_u *)"E503: ";
-	errmsg = (char_u *)_("is not a file or writable device");
+	errmsg = (char_u *)_(e_is_not_file_or_writable_device);
 	goto fail;
     }
     if (c == NODE_WRITABLE)
@@ -1083,7 +1082,7 @@ buf_write(
 	if (!p_odev)
 	{
 	    errnum = (char_u *)"E796: ";
-	    errmsg = (char_u *)_("writing to device disabled with 'opendevice' option");
+	    errmsg = (char_u *)_(e_writing_to_device_disabled_with_opendevice_option);
 	    goto fail;
 	}
 # endif
@@ -1099,7 +1098,7 @@ buf_write(
 	else if (mch_isdir(fname))
 	{
 	    errnum = (char_u *)"E502: ";
-	    errmsg = (char_u *)_("is a directory");
+	    errmsg = (char_u *)_(e_is_a_directory);
 	    goto fail;
 	}
 	if (overwriting)
@@ -1118,12 +1117,12 @@ buf_write(
 	    if (vim_strchr(p_cpo, CPO_FWRITE) != NULL)
 	    {
 		errnum = (char_u *)"E504: ";
-		errmsg = (char_u *)_(err_readonly);
+		errmsg = (char_u *)_(e_is_read_only_cannot_override_W_in_cpoptions);
 	    }
 	    else
 	    {
 		errnum = (char_u *)"E505: ";
-		errmsg = (char_u *)_("is read-only (add ! to override)");
+		errmsg = (char_u *)_(e_is_read_only_add_bang_to_override);
 	    }
 	    goto fail;
 	}
@@ -1477,21 +1476,21 @@ buf_write(
 			{
 			    if (buf_write_bytes(&write_info) == FAIL)
 			    {
-				errmsg = (char_u *)_("E506: Can't write to backup file (add ! to override)");
+				errmsg = (char_u *)_(e_canot_write_to_backup_file_add_bang_to_override);
 				break;
 			    }
 			    ui_breakcheck();
 			    if (got_int)
 			    {
-				errmsg = (char_u *)_(e_interr);
+				errmsg = (char_u *)_(e_interrupted);
 				break;
 			    }
 			}
 
 			if (close(bfd) < 0 && errmsg == NULL)
-			    errmsg = (char_u *)_("E507: Close error for backup file (add ! to override)");
+			    errmsg = (char_u *)_(e_close_error_for_backup_file_add_bang_to_write_anyway);
 			if (write_info.bw_len < 0)
-			    errmsg = (char_u *)_("E508: Can't read file for backup (add ! to override)");
+			    errmsg = (char_u *)_(e_cant_read_file_for_backup_add_bang_to_write_anyway);
 #ifdef UNIX
 			set_file_time(backup, st_old.st_atime, st_old.st_mtime);
 #endif
@@ -1513,7 +1512,7 @@ buf_write(
 	    vim_free(copybuf);
 
 	    if (backup == NULL && errmsg == NULL)
-		errmsg = (char_u *)_("E509: Cannot create backup file (add ! to override)");
+		errmsg = (char_u *)_(e_cannot_create_backup_file_add_bang_to_write_anyway);
 	    // ignore errors when forceit is TRUE
 	    if ((some_error || errmsg != NULL) && !forceit)
 	    {
@@ -1536,7 +1535,7 @@ buf_write(
 	    if (file_readonly && vim_strchr(p_cpo, CPO_FWRITE) != NULL)
 	    {
 		errnum = (char_u *)"E504: ";
-		errmsg = (char_u *)_(err_readonly);
+		errmsg = (char_u *)_(e_is_read_only_cannot_override_W_in_cpoptions);
 		goto fail;
 	    }
 
@@ -1608,7 +1607,7 @@ buf_write(
 	    }
 	    if (backup == NULL && !forceit)
 	    {
-		errmsg = (char_u *)_("E510: Can't make backup file (add ! to override)");
+		errmsg = (char_u *)_(e_cant_make_backup_file_add_bang_to_write_anyway);
 		goto fail;
 	    }
 	}
@@ -1650,7 +1649,7 @@ buf_write(
 	ml_preserve(buf, FALSE);
 	if (got_int)
 	{
-	    errmsg = (char_u *)_(e_interr);
+	    errmsg = (char_u *)_(e_interrupted);
 	    goto restore_backup;
 	}
     }
@@ -1746,7 +1745,7 @@ buf_write(
 		wfname = vim_tempname('w', FALSE);
 		if (wfname == NULL)	// Can't write without a tempfile!
 		{
-		    errmsg = (char_u *)_("E214: Can't find temp file for writing");
+		    errmsg = (char_u *)_(e_cant_find_temp_file_for_writing);
 		    goto restore_backup;
 		}
 	    }
@@ -1764,7 +1763,7 @@ buf_write(
     {
 	if (!forceit)
 	{
-	    errmsg = (char_u *)_("E213: Cannot convert (add ! to write without conversion)");
+	    errmsg = (char_u *)_(e_cannot_convert_add_bang_to_write_without_conversion);
 	    goto restore_backup;
 	}
 	notconverted = TRUE;
@@ -1821,11 +1820,12 @@ buf_write(
 			    || (mch_lstat((char *)fname, &st) == 0
 				&& (st.st_dev != st_old.st_dev
 				    || st.st_ino != st_old.st_ino)))
-			errmsg = (char_u *)_("E166: Can't open linked file for writing");
+			errmsg =
+			      (char_u *)_(e_cant_open_linked_file_for_writing);
 		    else
 #endif
 		    {
-			errmsg = (char_u *)_("E212: Can't open file for writing");
+			errmsg = (char_u *)_(e_cant_open_file_for_writing);
 			if (forceit && vim_strchr(p_cpo, CPO_FWRITE) == NULL
 								  && perm >= 0)
 			{
@@ -1902,7 +1902,7 @@ restore_backup:
 			&& st.st_ino != st_old.st_ino)
 		{
 		    close(fd);
-		    errmsg = (char_u *)_("E949: File changed while writing");
+		    errmsg = (char_u *)_(e_file_changed_while_writing);
 		    goto fail;
 		}
 	    }
@@ -2178,7 +2178,7 @@ restore_backup:
 	// If the 'fsync' option is FALSE, don't fsync().  Useful for laptops.
 	if (p_fs && vim_fsync(fd) != 0 && !device)
 	{
-	    errmsg = (char_u *)_(e_fsync);
+	    errmsg = (char_u *)_(e_fsync_failed);
 	    end = 0;
 	}
 #endif
@@ -2228,7 +2228,7 @@ restore_backup:
 #endif
 	if (close(fd) != 0)
 	{
-	    errmsg = (char_u *)_("E512: Close failed");
+	    errmsg = (char_u *)_(e_close_failed);
 	    end = 0;
 	}
 
@@ -2285,19 +2285,19 @@ restore_backup:
 	    if (write_info.bw_conv_error)
 	    {
 		if (write_info.bw_conv_error_lnum == 0)
-		    errmsg = (char_u *)_("E513: write error, conversion failed (make 'fenc' empty to override)");
+		    errmsg = (char_u *)_(e_write_error_conversion_failed_make_fenc_empty_to_override);
 		else
 		{
 		    errmsg_allocated = TRUE;
 		    errmsg = alloc(300);
-		    vim_snprintf((char *)errmsg, 300, _("E513: write error, conversion failed in line %ld (make 'fenc' empty to override)"),
+		    vim_snprintf((char *)errmsg, 300, _(e_write_error_conversion_failed_in_line_nr_make_fenc_empty_to_override),
 					 (long)write_info.bw_conv_error_lnum);
 		}
 	    }
 	    else if (got_int)
-		errmsg = (char_u *)_(e_interr);
+		errmsg = (char_u *)_(e_interrupted);
 	    else
-		errmsg = (char_u *)_("E514: write error (file system full?)");
+		errmsg = (char_u *)_(e_write_error_file_system_full);
 	}
 
 	// If we have a backup file, try to put it in place of the new file,
@@ -2315,7 +2315,7 @@ restore_backup:
 		// know we got the message.
 		if (got_int)
 		{
-		    msg(_(e_interr));
+		    msg(_(e_interrupted));
 		    out_flush();
 		}
 		if ((fd = mch_open((char *)backup, O_RDONLY | O_EXTRA, 0)) >= 0)
@@ -2453,7 +2453,7 @@ restore_backup:
 	    // If the original file does not exist yet
 	    // the current backup file becomes the original file
 	    if (org == NULL)
-		emsg(_("E205: Patchmode: can't save original file"));
+		emsg(_(e_patchmode_cant_save_original_file));
 	    else if (mch_stat(org, &st) < 0)
 	    {
 		vim_rename(backup, (char_u *)org);
@@ -2473,7 +2473,7 @@ restore_backup:
 		    || (empty_fd = mch_open(org,
 				      O_CREAT | O_EXTRA | O_EXCL | O_NOFOLLOW,
 					perm < 0 ? 0666 : (perm & 0777))) < 0)
-	      emsg(_("E206: patchmode: can't touch empty original file"));
+	      emsg(_(e_patchmode_cant_touch_empty_original_file));
 	    else
 	      close(empty_fd);
 	}
@@ -2488,7 +2488,7 @@ restore_backup:
     // conversion error.
     if (!p_bk && backup != NULL && !write_info.bw_conv_error
 	    && mch_remove(backup) != 0)
-	emsg(_("E207: Can't delete backup file"));
+	emsg(_(e_cant_delete_backup_file));
 
     goto nofail;
 

src/change.c

@@ -1247,7 +1247,7 @@ del_bytes(
     // If "count" is negative the caller must be doing something wrong.
     if (count < 1)
     {
-	siemsg("E292: Invalid count for del_bytes(): %ld", count);
+	siemsg(e_invalid_count_for_del_bytes_nr, count);
 	return FAIL;
     }
 
@@ -1655,13 +1655,14 @@ open_line(
 	lead_len = get_leader_len(saved_line, &lead_flags,
 							dir == BACKWARD, TRUE);
 #ifdef FEAT_CINDENT
-	if (lead_len == 0 && do_cindent)
+	if (lead_len == 0 && do_cindent && dir == FORWARD)
 	{
+	    // Check for a line comment after code.
 	    comment_start = check_linecomment(saved_line);
 	    if (comment_start != MAXCOL)
 	    {
 		lead_len = get_leader_len(saved_line + comment_start,
-					   &lead_flags, dir == BACKWARD, TRUE);
+						     &lead_flags, FALSE, TRUE);
 		if (lead_len != 0)
 		{
 		    lead_len += comment_start;

src/channel.c

@@ -161,7 +161,7 @@ ch_logfile(char_u *fname, char_u *opt)
 	file = fopen((char *)fname, *opt == 'w' ? "w" : "a");
 	if (file == NULL)
 	{
-	    semsg(_(e_notopen), fname);
+	    semsg(_(e_cant_open_file_str), fname);
 	    return;
 	}
 	vim_free(log_name);
@@ -707,8 +707,6 @@ channel_gui_unregister(channel_T *channel)
 
 #endif  // FEAT_GUI
 
-static char *e_cannot_connect = N_("E902: Cannot connect to port");
-
 /*
  * For Unix we need to call connect() again after connect() failed.
  * On Win32 one time is sufficient.
@@ -737,7 +735,7 @@ channel_connect(
 	if (sd == -1)
 	{
 	    ch_error(channel, "in socket() in channel_connect().");
-	    PERROR(_("E898: socket() in channel_connect()"));
+	    PERROR(_(e_socket_in_channel_connect));
 	    return -1;
 	}
 
@@ -778,7 +776,7 @@ channel_connect(
 	{
 	    ch_error(channel,
 		      "channel_connect: Connect failed with errno %d", errno);
-	    PERROR(_(e_cannot_connect));
+	    PERROR(_(e_cannot_connect_to_port));
 	    sock_close(sd);
 	    return -1;
 	}
@@ -824,7 +822,7 @@ channel_connect(
 		SOCK_ERRNO;
 		ch_error(channel,
 		      "channel_connect: Connect failed with errno %d", errno);
-		PERROR(_(e_cannot_connect));
+		PERROR(_(e_cannot_connect_to_port));
 		sock_close(sd);
 		return -1;
 	    }
@@ -863,7 +861,7 @@ channel_connect(
 		    ch_error(channel,
 			    "channel_connect: Connect failed with errno %d",
 			    so_error);
-		    PERROR(_(e_cannot_connect));
+		    PERROR(_(e_cannot_connect_to_port));
 		    sock_close(sd);
 		    return -1;
 		}
@@ -982,8 +980,7 @@ channel_open(
     if ((err = getaddrinfo(hostname, NULL, &hints, &res)) != 0)
     {
 	ch_error(channel, "in getaddrinfo() in channel_open()");
-	semsg(_("E901: getaddrinfo() in channel_open(): %s"),
-							   gai_strerror(err));
+	semsg(_(e_getaddrinfo_in_channel_open_str), gai_strerror(err));
 	channel_free(channel);
 	return NULL;
     }
@@ -1047,7 +1044,7 @@ channel_open(
     if ((host = gethostbyname(hostname)) == NULL)
     {
 	ch_error(channel, "in gethostbyname() in channel_open()");
-	PERROR(_("E901: gethostbyname() in channel_open()"));
+	PERROR(_(e_gethostbyname_in_channel_open));
 	channel_free(channel);
 	return NULL;
     }
@@ -1318,7 +1315,7 @@ channel_open_func(typval_T *argvars)
     if (argvars[1].v_type != VAR_UNKNOWN
 	 && (argvars[1].v_type != VAR_DICT || argvars[1].vval.v_dict == NULL))
     {
-	emsg(_(e_invarg));
+	emsg(_(e_invalid_argument));
 	return NULL;
     }
 
@@ -1330,7 +1327,7 @@ channel_open_func(typval_T *argvars)
 	p = vim_strchr(address + 1, ']');
 	if (p == NULL || *++p != ':')
 	{
-	    semsg(_(e_invarg2), address);
+	    semsg(_(e_invalid_argument_str), address);
 	    return NULL;
 	}
     }
@@ -1339,14 +1336,14 @@ channel_open_func(typval_T *argvars)
 	p = vim_strchr(address, ':');
 	if (p == NULL)
 	{
-	    semsg(_(e_invarg2), address);
+	    semsg(_(e_invalid_argument_str), address);
 	    return NULL;
 	}
     }
     port = strtol((char *)(p + 1), &rest, 10);
     if (*address == NUL || port <= 0 || port >= 65536 || *rest != NUL)
     {
-	semsg(_(e_invarg2), address);
+	semsg(_(e_invalid_argument_str), address);
 	return NULL;
     }
     if (is_ipv6)
@@ -1367,7 +1364,7 @@ channel_open_func(typval_T *argvars)
 	goto theend;
     if (opt.jo_timeout < 0)
     {
-	emsg(_(e_invarg));
+	emsg(_(e_invalid_argument));
 	goto theend;
     }
 
@@ -2309,7 +2306,7 @@ channel_add_block_id(chanpart_T *chanpart, int id)
     garray_T *gap = &chanpart->ch_block_ids;
 
     if (gap->ga_growsize == 0)
-	ga_init2(gap, (int)sizeof(int), 10);
+	ga_init2(gap, sizeof(int), 10);
     if (ga_grow(gap, 1) == OK)
     {
 	((int *)gap->ga_data)[gap->ga_len] = id;
@@ -2480,7 +2477,7 @@ channel_exe_cmd(channel_T *channel, ch_part_T part, typval_T *argv)
     {
 	ch_error(channel, "received command with non-string argument");
 	if (p_verbose > 2)
-	    emsg(_("E903: received command with non-string argument"));
+	    emsg(_(e_received_command_with_non_string_argument));
 	return;
     }
     arg = argv[1].vval.v_string;
@@ -2537,13 +2534,13 @@ channel_exe_cmd(channel_T *channel, ch_part_T part, typval_T *argv)
 	{
 	    ch_error(channel, "last argument for expr/call must be a number");
 	    if (p_verbose > 2)
-		emsg(_("E904: last argument for expr/call must be a number"));
+		emsg(_(e_last_argument_for_expr_call_must_be_number));
 	}
 	else if (is_call && argv[2].v_type != VAR_LIST)
 	{
 	    ch_error(channel, "third argument for call must be a list");
 	    if (p_verbose > 2)
-		emsg(_("E904: third argument for call must be a list"));
+		emsg(_(e_third_argument_for_call_must_be_list));
 	}
 	else
 	{
@@ -2600,7 +2597,7 @@ channel_exe_cmd(channel_T *channel, ch_part_T part, typval_T *argv)
     else if (p_verbose > 2)
     {
 	ch_error(channel, "Received unknown command: %s", (char *)cmd);
-	semsg(_("E905: received unknown command: %s"), cmd);
+	semsg(_(e_received_unknown_command_str), cmd);
     }
 }
 
@@ -3833,7 +3830,7 @@ get_channel_arg(typval_T *tv, int check_open, int reading, ch_part_T part)
     }
     else
     {
-	semsg(_(e_invarg2), tv_get_string(tv));
+	semsg(_(e_invalid_argument_str), tv_get_string(tv));
 	return NULL;
     }
     if (channel != NULL && reading)
@@ -3843,7 +3840,7 @@ get_channel_arg(typval_T *tv, int check_open, int reading, ch_part_T part)
     if (check_open && (channel == NULL || (!channel_is_open(channel)
 					     && !(reading && has_readahead))))
     {
-	emsg(_("E906: not an open channel"));
+	emsg(_(e_not_an_open_channel));
 	return NULL;
     }
     return channel;
@@ -4051,7 +4048,7 @@ channel_send(
 	if (!channel->ch_error && fun != NULL)
 	{
 	    ch_error(channel, "%s(): write while not connected", fun);
-	    semsg(_("E630: %s(): write while not connected"), fun);
+	    semsg(_(e_str_write_while_not_connected), fun);
 	}
 	channel->ch_error = TRUE;
 	return FAIL;
@@ -4197,7 +4194,7 @@ channel_send(
 	    if (!channel->ch_error && fun != NULL)
 	    {
 		ch_error(channel, "%s(): write failed", fun);
-		semsg(_("E631: %s(): write failed"), fun);
+		semsg(_(e_str_write_failed), fun);
 	    }
 	    channel->ch_error = TRUE;
 	    return FAIL;
@@ -4245,7 +4242,7 @@ send_common(
     {
 	if (eval)
 	{
-	    semsg(_("E917: Cannot use a callback with %s()"), fun);
+	    semsg(_(e_cannot_use_callback_with_str), fun);
 	    return NULL;
 	}
 	channel_set_req_callback(channel, *part_read, &opt->jo_callback, id);
@@ -4290,7 +4287,7 @@ ch_expr_common(typval_T *argvars, typval_T *rettv, int eval)
     ch_mode = channel_get_mode(channel, part_send);
     if (ch_mode == MODE_RAW || ch_mode == MODE_NL)
     {
-	emsg(_("E912: cannot use ch_evalexpr()/ch_sendexpr() with a raw or nl channel"));
+	emsg(_(e_cannot_use_evalexpr_sendexpr_with_raw_or_nl_channel));
 	return;
     }
 

src/charset.c

@@ -1240,10 +1240,15 @@ getvcol(
 	posptr = NULL;  // continue until the NUL
     else
     {
-	// Special check for an empty line, which can happen on exit, when
-	// ml_get_buf() always returns an empty string.
-	if (*ptr == NUL)
-	    pos->col = 0;
+	colnr_T i;
+
+	// In a few cases the position can be beyond the end of the line.
+	for (i = 0; i < pos->col; ++i)
+	    if (ptr[i] == NUL)
+	    {
+		pos->col = i;
+		break;
+	    }
 	posptr = ptr + pos->col;
 	if (has_mbyte)
 	    // always start on the first byte
@@ -1471,6 +1476,7 @@ skipwhite(char_u *q)
     return p;
 }
 
+#if defined(FEAT_EVAL) || defined(PROTO)
 /*
  * skip over ' ', '\t' and '\n'.
  */
@@ -1483,6 +1489,7 @@ skipwhite_and_nl(char_u *q)
 	++p;
     return p;
 }
+#endif
 
 /*
  * getwhitecols: return the number of whitespace

src/cindent.c

@@ -66,8 +66,6 @@ cin_is_cinword(char_u *line)
 }
 #endif
 
-#if defined(FEAT_CINDENT) || defined(FEAT_SYN_HL)
-
 /*
  * Skip to the end of a "string" and a 'c' character.
  * If there is no string or character, return argument unmodified.
@@ -137,6 +135,21 @@ skip_string(char_u *p)
     return p;
 }
 
+/*
+ * Return TRUE if "line[col]" is inside a C string.
+ */
+    int
+is_pos_in_string(char_u *line, colnr_T col)
+{
+    char_u *p;
+
+    for (p = line; *p && (colnr_T)(p - line) < col; ++p)
+	p = skip_string(p);
+    return !((colnr_T)(p - line) <= col);
+}
+
+#if defined(FEAT_CINDENT) || defined(FEAT_SYN_HL)
+
 /*
  * Find the start of a comment, not knowing if we are in a comment right now.
  * Search starts at w_cursor.lnum and goes backwards.
@@ -152,8 +165,6 @@ ind_find_start_comment(void)	    // XXX
 find_start_comment(int ind_maxcomment)	// XXX
 {
     pos_T	*pos;
-    char_u	*line;
-    char_u	*p;
     int		cur_maxcomment = ind_maxcomment;
 
     for (;;)
@@ -164,10 +175,7 @@ find_start_comment(int ind_maxcomment)	// XXX
 
 	// Check if the comment start we found is inside a string.
 	// If it is then restrict the search to below this line and try again.
-	line = ml_get(pos->lnum);
-	for (p = line; *p && (colnr_T)(p - line) < pos->col; ++p)
-	    p = skip_string(p);
-	if ((colnr_T)(p - line) <= pos->col)
+	if (!is_pos_in_string(ml_get(pos->lnum), pos->col))
 	    break;
 	cur_maxcomment = curwin->w_cursor.lnum - pos->lnum - 1;
 	if (cur_maxcomment <= 0)
@@ -188,8 +196,6 @@ find_start_comment(int ind_maxcomment)	// XXX
 find_start_rawstring(int ind_maxcomment)	// XXX
 {
     pos_T	*pos;
-    char_u	*line;
-    char_u	*p;
     int		cur_maxcomment = ind_maxcomment;
 
     for (;;)
@@ -200,10 +206,7 @@ find_start_rawstring(int ind_maxcomment)	// XXX
 
 	// Check if the raw string start we found is inside a string.
 	// If it is then restrict the search to below this line and try again.
-	line = ml_get(pos->lnum);
-	for (p = line; *p && (colnr_T)(p - line) < pos->col; ++p)
-	    p = skip_string(p);
-	if ((colnr_T)(p - line) <= pos->col)
+	if (!is_pos_in_string(ml_get(pos->lnum), pos->col))
 	    break;
 	cur_maxcomment = curwin->w_cursor.lnum - pos->lnum - 1;
 	if (cur_maxcomment <= 0)
@@ -1223,7 +1226,7 @@ cin_isfuncdecl(
 	if (*s == ')' && cin_nocode(s + 1))
 	{
 	    // ')' at the end: may have found a match
-	    // Check for he previous line not to end in a backslash:
+	    // Check for the previous line not to end in a backslash:
 	    //       #if defined(x) && {backslash}
 	    //		 defined(y)
 	    lnum = first_lnum - 1;
@@ -1792,7 +1795,7 @@ parse_cino(buf_T *buf)
     buf->b_ind_unclosed2 = sw;
 
     // Suppress ignoring spaces from the indent of a line starting with an
-    // unclosed parentheses.
+    // unclosed parenthesis.
     buf->b_ind_unclosed_noignore = 0;
 
     // If the opening paren is the last nonwhite character on the line, and
@@ -1804,11 +1807,11 @@ parse_cino(buf_T *buf)
     // an unclosed parenthesis.
     buf->b_ind_unclosed_whiteok = 0;
 
-    // Indent a closing parentheses under the line start of the matching
-    // opening parentheses.
+    // Indent a closing parenthesis under the line start of the matching
+    // opening parenthesis.
     buf->b_ind_matching_paren = 0;
 
-    // Indent a closing parentheses under the previous line.
+    // Indent a closing parenthesis under the previous line.
     buf->b_ind_paren_prev = 0;
 
     // Extra indent for comments.

src/clientserver.c

@@ -119,7 +119,7 @@ sendToLocalVim(char_u *cmd, int asExpr, char_u **result)
 	{
 	    if (ret == NULL)
 	    {
-		char	*err = _(e_invexprmsg);
+		char	*err = _(e_invalid_expression_received);
 		size_t	len = STRLEN(cmd) + STRLEN(err) + 5;
 		char_u	*msg;
 
@@ -709,7 +709,7 @@ check_connection(void)
     make_connection();
     if (X_DISPLAY == NULL)
     {
-	emsg(_("E240: No connection to the X server"));
+	emsg(_(e_no_connection_to_x_server));
 	return FAIL;
     }
     return OK;
@@ -759,7 +759,7 @@ remote_common(typval_T *argvars, typval_T *rettv, int expr)
 	    vim_free(r);
 	}
 	else
-	    semsg(_("E241: Unable to send to %s"), server_name);
+	    semsg(_(e_unable_to_send_to_str), server_name);
 	return;
     }
 
@@ -929,7 +929,7 @@ f_remote_read(typval_T *argvars UNUSED, typval_T *rettv)
 		|| serverReadReply(X_DISPLAY, serverStrToWin(serverid),
 						       &r, FALSE, timeout) < 0)
 # endif
-	    emsg(_("E277: Unable to read a server reply"));
+	    emsg(_(e_unable_to_read_server_reply));
     }
 #endif
     rettv->v_type = VAR_STRING;
@@ -972,7 +972,7 @@ f_remote_startserver(typval_T *argvars UNUSED, typval_T *rettv UNUSED)
     if (server == NULL)
 	return;		// type error; errmsg already given
     if (serverName != NULL)
-	emsg(_("E941: already started a server"));
+	emsg(_(e_already_started_server));
     else
     {
 # ifdef FEAT_X11
@@ -983,7 +983,7 @@ f_remote_startserver(typval_T *argvars UNUSED, typval_T *rettv UNUSED)
 # endif
     }
 #else
-    emsg(_("E942: +clientserver feature not available"));
+    emsg(_(e_clientserver_feature_not_available));
 #endif
 }
 
@@ -1016,7 +1016,7 @@ f_server2client(typval_T *argvars UNUSED, typval_T *rettv)
 
     if (serverSendReply(server, reply) < 0)
     {
-	emsg(_("E258: Unable to send to client"));
+	emsg(_(e_unable_to_send_to_client));
 	return;
     }
     rettv->vval.v_number = 0;

src/clipboard.c

@@ -567,7 +567,7 @@ clip_get_word_boundaries(Clipboard_T *cb, int row, int col)
 	return;
 
     p = ScreenLines + LineOffset[row];
-    // Correct for starting in the right halve of a double-wide char
+    // Correct for starting in the right half of a double-wide char
     if (enc_dbcs != 0)
 	col -= dbcs_screen_head_off(p, p + col);
     else if (enc_utf8 && p[col] == 0)
@@ -1030,7 +1030,7 @@ clip_copy_modeless_selection(int both UNUSED)
     if (row2 > clip_star.max_row)
 	row2 = clip_star.max_row;
 #endif
-    // correct starting point for being on right halve of double-wide char
+    // correct starting point for being on right half of double-wide char
     p = ScreenLines + LineOffset[row1];
     if (enc_dbcs != 0)
 	col1 -= (*mb_head_off)(p, p + col1);
@@ -1140,7 +1140,7 @@ clip_copy_modeless_selection(int both UNUSED)
 									bufp);
 			}
 		    }
-		    // Skip right halve of double-wide character.
+		    // Skip right half of double-wide character.
 		    if (ScreenLines[off + i + 1] == 0)
 			++i;
 		}
@@ -1305,12 +1305,12 @@ check_clipboard_option(void)
 	    p += 8;
 	    new_exclude_prog = vim_regcomp(p, RE_MAGIC);
 	    if (new_exclude_prog == NULL)
-		errmsg = e_invarg;
+		errmsg = e_invalid_argument;
 	    break;
 	}
 	else
 	{
-	    errmsg = e_invarg;
+	    errmsg = e_invalid_argument;
 	    break;
 	}
 	if (*p == ',')
@@ -1540,6 +1540,7 @@ clip_x11_notify_cb(Widget w UNUSED, Atom *sel_atom UNUSED, Atom *target UNUSED)
 /*
  * Property callback to get a timestamp for XtOwnSelection.
  */
+# if (defined(FEAT_X11) && defined(FEAT_XCLIPBOARD)) || defined(PROTO)
     static void
 clip_x11_timestamp_cb(
     Widget	w,
@@ -1592,6 +1593,7 @@ x11_setup_selection(Widget w)
     XtAddEventHandler(w, PropertyChangeMask, False,
 	    /*(XtEventHandler)*/clip_x11_timestamp_cb, (XtPointer)NULL);
 }
+# endif
 
     static void
 clip_x11_request_selection_cb(

src/cmdexpand.c

@@ -366,13 +366,13 @@ ExpandOne(
 	    // are wildcards, the real problem is that there was no match,
 	    // causing the pattern to be added, which has illegal characters.
 	    if (!(options & WILD_SILENT) && (options & WILD_LIST_NOTFOUND))
-		semsg(_(e_nomatch2), str);
+		semsg(_(e_no_match_str_2), str);
 #endif
 	}
 	else if (xp->xp_numfiles == 0)
 	{
 	    if (!(options & WILD_SILENT))
-		semsg(_(e_nomatch2), str);
+		semsg(_(e_no_match_str_2), str);
 	}
 	else
 	{
@@ -2342,7 +2342,7 @@ expand_shellcmd(
     // Go over all directories in $PATH.  Expand matches in that directory and
     // collect them in "ga".  When "." is not in $PATH also expand for the
     // current directory, to find "subdir/cmd".
-    ga_init2(&ga, (int)sizeof(char *), 10);
+    ga_init2(&ga, sizeof(char *), 10);
     hash_init(&found_ht);
     for (s = path; ; s = e)
     {
@@ -2497,7 +2497,7 @@ ExpandUserDefined(
     if (retstr == NULL)
 	return FAIL;
 
-    ga_init2(&ga, (int)sizeof(char *), 3);
+    ga_init2(&ga, sizeof(char *), 3);
     for (s = retstr; *s != NUL; s = e)
     {
 	e = vim_strchr(s, '\n');
@@ -2543,7 +2543,7 @@ ExpandUserList(
     if (retlist == NULL)
 	return FAIL;
 
-    ga_init2(&ga, (int)sizeof(char *), 3);
+    ga_init2(&ga, sizeof(char *), 3);
     // Loop over the items in the list.
     FOR_ALL_LIST_ITEMS(retlist, li)
     {
@@ -2903,7 +2903,7 @@ f_getcompletion(typval_T *argvars, typval_T *rettv)
     pat = tv_get_string(&argvars[0]);
     if (argvars[1].v_type != VAR_STRING)
     {
-	semsg(_(e_invarg2), "type must be a string");
+	semsg(_(e_invalid_argument_str), "type must be a string");
 	return;
     }
     type = tv_get_string(&argvars[1]);
@@ -2933,7 +2933,7 @@ f_getcompletion(typval_T *argvars, typval_T *rettv)
 	xpc.xp_context = cmdcomplete_str_to_type(type);
 	if (xpc.xp_context == EXPAND_NOTHING)
 	{
-	    semsg(_(e_invarg2), type);
+	    semsg(_(e_invalid_argument_str), type);
 	    return;
 	}
 

src/cmdhist.c

@@ -37,11 +37,13 @@ get_histentry(int hist_type)
     return history[hist_type];
 }
 
+#if defined(FEAT_VIMINFO) || defined(PROTO)
     void
 set_histentry(int hist_type, histentry_T *entry)
 {
     history[hist_type] = entry;
 }
+#endif
 
     int *
 get_hisidx(int hist_type)
@@ -49,11 +51,13 @@ get_hisidx(int hist_type)
     return &hisidx[hist_type];
 }
 
+#if defined(FEAT_VIMINFO) || defined(PROTO)
     int *
 get_hisnum(int hist_type)
 {
     return &hisnum[hist_type];
 }
+#endif
 
 /*
  * Translate a history character to the associated type number.
@@ -724,7 +728,7 @@ ex_history(exarg_T *eap)
 	    else
 	    {
 		*end = i;
-		semsg(_(e_trailing_arg), arg);
+		semsg(_(e_trailing_characters_str), arg);
 		return;
 	    }
 	}
@@ -736,7 +740,7 @@ ex_history(exarg_T *eap)
 	end = arg;
     if (!get_list_range(&end, &hisidx1, &hisidx2) || *end != NUL)
     {
-	semsg(_(e_trailing_arg), end);
+	semsg(_(e_trailing_characters_str), end);
 	return;
     }
 

src/config.mk.in

@@ -37,10 +37,13 @@ X_PRE_LIBS	= @X_PRE_LIBS@
 X_EXTRA_LIBS	= @X_EXTRA_LIBS@
 X_LIBS		= @X_LIB@
 
+XDIFF_OBJS_USED	= @XDIFF_OBJS_USED@
+
 LUA_LIBS	= @LUA_LIBS@
 LUA_SRC		= @LUA_SRC@
 LUA_OBJ		= @LUA_OBJ@
 LUA_CFLAGS	= @LUA_CFLAGS@
+LUA_CFLAGS_EXTRA	= @LUA_CFLAGS_EXTRA@
 LUA_PRO		= @LUA_PRO@
 
 MZSCHEME_LIBS	= @MZSCHEME_LIBS@
@@ -60,15 +63,18 @@ PERL_SRC	= @PERL_SRC@
 PERL_OBJ	= @PERL_OBJ@
 PERL_PRO	= @PERL_PRO@
 PERL_CFLAGS	= @PERL_CFLAGS@
+PERL_CFLAGS_EXTRA	= @PERL_CFLAGS_EXTRA@
 
 PYTHON_SRC	= @PYTHON_SRC@
 PYTHON_OBJ	= @PYTHON_OBJ@
 PYTHON_CFLAGS	= @PYTHON_CFLAGS@
+PYTHON_CFLAGS_EXTRA	= @PYTHON_CFLAGS_EXTRA@
 PYTHON_LIBS	= @PYTHON_LIBS@
 
 PYTHON3_SRC	= @PYTHON3_SRC@
 PYTHON3_OBJ	= @PYTHON3_OBJ@
 PYTHON3_CFLAGS	= @PYTHON3_CFLAGS@
+PYTHON3_CFLAGS_EXTRA	= @PYTHON3_CFLAGS_EXTRA@
 PYTHON3_LIBS	= @PYTHON3_LIBS@
 
 TCL		= @vi_cv_path_tcl@
@@ -76,6 +82,7 @@ TCL_SRC		= @TCL_SRC@
 TCL_OBJ		= @TCL_OBJ@
 TCL_PRO		= @TCL_PRO@
 TCL_CFLAGS	= @TCL_CFLAGS@
+TCL_CFLAGS_EXTRA	= @TCL_CFLAGS_EXTRA@
 TCL_LIBS	= @TCL_LIBS@
 
 NETBEANS_SRC	= @NETBEANS_SRC@
@@ -91,6 +98,7 @@ RUBY_SRC	= @RUBY_SRC@
 RUBY_OBJ	= @RUBY_OBJ@
 RUBY_PRO	= @RUBY_PRO@
 RUBY_CFLAGS	= @RUBY_CFLAGS@
+RUBY_CFLAGS_EXTRA	= @RUBY_CFLAGS_EXTRA@
 RUBY_LIBS	= @RUBY_LIBS@
 
 AWK		= @AWK@

src/configure.ac

@@ -540,6 +540,12 @@ esac
 AC_SUBST(dovimdiff)
 AC_SUBST(dogvimdiff)
 
+if test "x$features" = "xtiny" -o "x$features" = "xsmall"; then
+  has_eval=no
+else
+  has_eval=yes
+fi
+
 AC_MSG_CHECKING(--with-compiledby argument)
 AC_ARG_WITH(compiledby, [  --with-compiledby=NAME  name to show in :version message],
 	compiledby="$withval"; AC_MSG_RESULT($withval),
@@ -567,6 +573,16 @@ else
   AC_MSG_RESULT(yes)
 fi
 
+AC_MSG_CHECKING([diff feature])
+if test "x$features" = "xtiny" -o "x$features" = "xsmall"; then
+  AC_MSG_RESULT([disabled in $features version])
+else
+  AC_MSG_RESULT(enabled)
+  AC_DEFINE(FEAT_DIFF)
+  XDIFF_OBJS_USED="\$(XDIFF_OBJS)"
+  AC_SUBST(XDIFF_OBJS_USED)
+fi
+
 dnl Check for Lua feature.
 AC_MSG_CHECKING(--enable-luainterp argument)
 AC_ARG_ENABLE(luainterp,
@@ -575,7 +591,7 @@ AC_ARG_ENABLE(luainterp,
 AC_MSG_RESULT($enable_luainterp)
 
 if test "$enable_luainterp" = "yes" -o "$enable_luainterp" = "dynamic"; then
-  if test "x$features" = "xtiny" -o "x$features" = "xsmall"; then
+  if test "$has_eval" = "no"; then
     AC_MSG_ERROR([cannot use Lua with tiny or small features])
   fi
 
@@ -781,6 +797,7 @@ if test "$enable_luainterp" = "yes" -o "$enable_luainterp" = "dynamic"; then
   AC_SUBST(LUA_PRO)
   AC_SUBST(LUA_LIBS)
   AC_SUBST(LUA_CFLAGS)
+  AC_SUBST(LUA_CFLAGS_EXTRA)
 fi
 
 
@@ -1061,7 +1078,7 @@ AC_ARG_ENABLE(perlinterp,
 	[enable_perlinterp="no"])
 AC_MSG_RESULT($enable_perlinterp)
 if test "$enable_perlinterp" = "yes" -o "$enable_perlinterp" = "dynamic"; then
-  if test "x$features" = "xtiny" -o "x$features" = "xsmall"; then
+  if test "$has_eval" = "no"; then
     AC_MSG_ERROR([cannot use Perl with tiny or small features])
   fi
   AC_SUBST(vi_cv_path_perl)
@@ -1201,6 +1218,7 @@ AC_SUBST(PERL_SRC)
 AC_SUBST(PERL_OBJ)
 AC_SUBST(PERL_PRO)
 AC_SUBST(PERL_CFLAGS)
+AC_SUBST(PERL_CFLAGS_EXTRA)
 AC_SUBST(PERL_LIBS)
 
 AC_MSG_CHECKING(--enable-pythoninterp argument)
@@ -1209,7 +1227,7 @@ AC_ARG_ENABLE(pythoninterp,
 	[enable_pythoninterp="no"])
 AC_MSG_RESULT($enable_pythoninterp)
 if test "$enable_pythoninterp" = "yes" -o "$enable_pythoninterp" = "dynamic"; then
-  if test "x$features" = "xtiny" -o "x$features" = "xsmall"; then
+  if test "$has_eval" = "no"; then
     AC_MSG_ERROR([cannot use Python with tiny or small features])
   fi
 
@@ -1433,6 +1451,7 @@ fi
 
 AC_SUBST(PYTHON_LIBS)
 AC_SUBST(PYTHON_CFLAGS)
+AC_SUBST(PYTHON_CFLAGS_EXTRA)
 AC_SUBST(PYTHON_SRC)
 AC_SUBST(PYTHON_OBJ)
 
@@ -1443,7 +1462,7 @@ AC_ARG_ENABLE(python3interp,
 	[enable_python3interp="no"])
 AC_MSG_RESULT($enable_python3interp)
 if test "$enable_python3interp" = "yes" -o "$enable_python3interp" = "dynamic"; then
-  if test "x$features" = "xtiny" -o "x$features" = "xsmall"; then
+  if test "$has_eval" = "no"; then
     AC_MSG_ERROR([cannot use Python with tiny or small features])
   fi
 
@@ -1650,6 +1669,7 @@ fi
 
 AC_SUBST(PYTHON3_LIBS)
 AC_SUBST(PYTHON3_CFLAGS)
+AC_SUBST(PYTHON3_CFLAGS_EXTRA)
 AC_SUBST(PYTHON3_SRC)
 AC_SUBST(PYTHON3_OBJ)
 
@@ -1946,6 +1966,7 @@ AC_SUBST(TCL_SRC)
 AC_SUBST(TCL_OBJ)
 AC_SUBST(TCL_PRO)
 AC_SUBST(TCL_CFLAGS)
+AC_SUBST(TCL_CFLAGS_EXTRA)
 AC_SUBST(TCL_LIBS)
 
 AC_MSG_CHECKING(--enable-rubyinterp argument)
@@ -1954,7 +1975,7 @@ AC_ARG_ENABLE(rubyinterp,
 	[enable_rubyinterp="no"])
 AC_MSG_RESULT($enable_rubyinterp)
 if test "$enable_rubyinterp" = "yes" -o "$enable_rubyinterp" = "dynamic"; then
-  if test "x$features" = "xtiny" -o "x$features" = "xsmall"; then
+  if test "$has_eval" = "no"; then
     AC_MSG_ERROR([cannot use Ruby with tiny or small features])
   fi
 
@@ -2050,6 +2071,7 @@ AC_SUBST(RUBY_SRC)
 AC_SUBST(RUBY_OBJ)
 AC_SUBST(RUBY_PRO)
 AC_SUBST(RUBY_CFLAGS)
+AC_SUBST(RUBY_CFLAGS_EXTRA)
 AC_SUBST(RUBY_LIBS)
 
 AC_MSG_CHECKING(--enable-cscope argument)
@@ -2066,7 +2088,7 @@ AC_ARG_ENABLE(netbeans,
 	[  --disable-netbeans      Disable NetBeans integration support.],
 	, [enable_netbeans="yes"])
 if test "$enable_netbeans" = "yes"; then
-  if test "x$features" = "xtiny" -o "x$features" = "xsmall"; then
+  if test "$has_eval" = "no"; then
     AC_MSG_RESULT([cannot use NetBeans with tiny or small features])
     enable_netbeans="no"
   else
@@ -2081,7 +2103,7 @@ AC_ARG_ENABLE(channel,
 	[  --disable-channel       Disable process communication support.],
 	, [enable_channel="yes"])
 if test "$enable_channel" = "yes"; then
-  if test "x$features" = "xtiny" -o "x$features" = "xsmall"; then
+  if test "$has_eval" = "no"; then
     AC_MSG_RESULT([cannot use channels with tiny or small features])
     enable_channel="no"
   else
@@ -2189,7 +2211,7 @@ AC_ARG_ENABLE(terminal,
 	[  --enable-terminal       Enable terminal emulation support.],
 	, [enable_terminal="auto"])
 if test "$enable_terminal" = "yes" || test "$enable_terminal" = "auto" -a "x$features" = "xhuge" ; then
-  if test "x$features" = "xtiny" -o "x$features" = "xsmall"; then
+  if test "$has_eval" = "no"; then
     AC_MSG_RESULT([cannot use terminal emulator with tiny or small features])
     enable_terminal="no"
   else
@@ -3778,7 +3800,12 @@ if test "$enable_canberra" = "maybe"; then
     enable_canberra="no"
   fi
 else
-  AC_MSG_RESULT($enable_canberra)
+  if test "$enable_canberra" = "yes" -a "$has_eval" = "no"; then
+    AC_MSG_RESULT([cannot use sound with tiny or small features])
+    enable_canberra="no"
+  else
+    AC_MSG_RESULT($enable_canberra)
+  fi
 fi
 if test "$enable_canberra" = "yes"; then
   if test "x$PKG_CONFIG" != "xno"; then
@@ -3792,7 +3819,7 @@ if test "$enable_canberra" = "yes"; then
   AC_MSG_CHECKING(for libcanberra)
   ac_save_CFLAGS="$CFLAGS"
   ac_save_LIBS="$LIBS"
-  if `echo "$CFLAGS" | grep -v "$canberra_cflags" >/dev/null`; then
+  if `echo "$CFLAGS" | grep -v "$canberra_cflags" 2>/dev/null`; then
     CFLAGS="$CFLAGS $canberra_cflags"
   fi
   LIBS="$LIBS $canberra_lib"