patch 9.0.1751: CI: labeler configuration not found

Problem: CI: labeler configuration not found
         (after 9.0.1748)
Solution: set configuration path

closes: #12852

Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Philip H <47042125+pheiduck@users.noreply.github.com>

.cirrus.yml

@@ -13,7 +13,6 @@ freebsd_task:
         image_family: freebsd-12-4
   timeout_in: 20m
   install_script:
-    - pkg update -f
     - pkg install -y gettext
   build_script:
     - NPROC=$(getconf _NPROCESSORS_ONLN)

.github/CODEOWNERS

@@ -18,6 +18,7 @@ runtime/autoload/netrwFileHandlers.vim	@cecamp
 runtime/autoload/netrwSettings.vim	@cecamp
 runtime/autoload/php.vim		@david-szabo97
 runtime/autoload/rubycomplete.vim	@segfault @dkearns
+runtime/autoload/rust.vim		@lilyball
 runtime/autoload/tar.vim		@cecamp
 runtime/autoload/vimball.vim		@cecamp
 runtime/autoload/xmlformat.vim		@chrisbra
@@ -150,7 +151,9 @@ runtime/ftplugin/go.vim			@dbarnett
 runtime/ftplugin/gprof.vim		@dpelle
 runtime/ftplugin/haml.vim		@tpope
 runtime/ftplugin/hare.vim		@rsaihe
+runtime/ftplugin/heex.vim		@cvincent
 runtime/ftplugin/hgcommit.vim		@k-takata
+runtime/ftplugin/hog.vim		@wtfbbqhax
 runtime/ftplugin/html.vim		@dkearns
 runtime/ftplugin/i3config.vim		@hiqua
 runtime/ftplugin/icon.vim		@dkearns
@@ -180,11 +183,13 @@ runtime/ftplugin/pascal.vim		@dkearns
 runtime/ftplugin/pbtxt.vim		@lakshayg
 runtime/ftplugin/pdf.vim		@tpope
 runtime/ftplugin/perl.vim		@petdance @dkearns
+runtime/ftplugin/php.vim		@dkearns
 runtime/ftplugin/pod.vim		@petdance @dkearns
 runtime/ftplugin/poefilter.vim		@ObserverOfTime
 runtime/ftplugin/postscr.vim		@mrdubya
 runtime/ftplugin/ps1.vim		@heaths
 runtime/ftplugin/ps1xml.vim		@heaths
+runtime/ftplugin/pymanifest.vim		@ObserverOfTime
 runtime/ftplugin/python.vim		@tpict
 runtime/ftplugin/qb64.vim		@dkearns
 runtime/ftplugin/r.vim			@jalvesaq
@@ -197,10 +202,12 @@ runtime/ftplugin/routeros.vim		@zainin
 runtime/ftplugin/rrst.vim		@jalvesaq
 runtime/ftplugin/rst.vim		@marshallward
 runtime/ftplugin/ruby.vim		@tpope @dkearns
+runtime/ftplugin/rust.vim		@lilyball
 runtime/ftplugin/sass.vim		@tpope
 runtime/ftplugin/scala.vim		@derekwyatt
 runtime/ftplugin/scss.vim		@tpope
 runtime/ftplugin/sdoc.vim		@gpanders
+runtime/ftplugin/sed.vim		@dkearns
 runtime/ftplugin/sh.vim			@dkearns
 runtime/ftplugin/solution.vim		@dkearns
 runtime/ftplugin/spec.vim		@ignatenkobrain
@@ -215,6 +222,7 @@ runtime/ftplugin/toml.vim		@averms
 runtime/ftplugin/tt2html.vim		@petdance
 runtime/ftplugin/typescript.vim		@dkearns
 runtime/ftplugin/typescriptreact.vim	@dkearns
+runtime/ftplugin/unison.vim		@chuwy
 runtime/ftplugin/vdf.vim		@ObserverOfTime
 runtime/ftplugin/wast.vim		@rhysd
 runtime/ftplugin/wget.vim		@dkearns
@@ -251,6 +259,7 @@ runtime/indent/go.vim			@dbarnett
 runtime/indent/gyp.vim			@ObserverOfTime
 runtime/indent/haml.vim			@tpope
 runtime/indent/hare.vim			@rsaihe
+runtime/indent/hog.vim			@wtfbbqhax
 runtime/indent/idlang.vim		@dkearns
 runtime/indent/j.vim			@glts
 runtime/indent/java.vim			@xuhdev
@@ -258,6 +267,7 @@ runtime/indent/javascript.vim		@bounceme
 runtime/indent/json.vim			@elzr
 runtime/indent/jsonc.vim		@izhakjakov
 runtime/indent/julia.vim		@carlobaldassi
+runtime/indent/krl.vim			@KnoP-01
 runtime/indent/ld.vim			@dkearns
 runtime/indent/less.vim			@genoma
 runtime/indent/liquid.vim		@tpope
@@ -276,6 +286,7 @@ runtime/indent/ps1.vim			@heaths
 runtime/indent/qb64.vim			@dkearns
 runtime/indent/r.vim			@jalvesaq
 runtime/indent/racket.vim		@benknoble
+runtime/indent/rapid.vim		@KnoP-01
 runtime/indent/readline.vim		@dkearns
 runtime/indent/rhelp.vim		@jalvesaq
 runtime/indent/rmd.vim			@jalvesaq
@@ -377,6 +388,7 @@ runtime/syntax/hare.vim			@rsaihe
 runtime/syntax/haskell.vim		@coot
 runtime/syntax/hgcommit.vim		@k-takata
 runtime/syntax/hitest.vim		@lacygoill
+runtime/syntax/hog.vim			@wtfbbqhax
 runtime/syntax/hollywood.vim		@sodero
 runtime/syntax/html.vim			@dkearns
 runtime/syntax/i3config.vim		@hiqua
@@ -389,6 +401,7 @@ runtime/syntax/javascript.vim		@fleiner
 runtime/syntax/jsonc.vim		@izhakjakov
 runtime/syntax/julia.vim		@carlobaldassi
 runtime/syntax/kconfig.vim		@chrisbra
+runtime/syntax/krl.vim			@KnoP-01
 runtime/syntax/less.vim			@genoma
 runtime/syntax/lex.vim			@cecamp
 runtime/syntax/liquid.vim		@tpope
@@ -428,10 +441,12 @@ runtime/syntax/prolog.vim		@XVilka
 runtime/syntax/ps1.vim			@heaths
 runtime/syntax/ps1xml.vim		@heaths
 runtime/syntax/psl.vim			@danielkho
+runtime/syntax/pymanifest.vim		@ObserverOfTime
 runtime/syntax/qb64.vim			@dkearns
 runtime/syntax/r.vim			@jalvesaq
 runtime/syntax/racket.vim		@benknoble
 runtime/syntax/raml.vim			@in3d
+runtime/syntax/rapid.vim		@KnoP-01
 runtime/syntax/ratpoison.vim		@trapd00r
 runtime/syntax/rc.vim			@chrisbra
 runtime/syntax/rcs.vim			@hdima
@@ -477,6 +492,7 @@ runtime/syntax/tt2js.vim		@petdance
 runtime/syntax/typescript.vim		@HerringtonDarkholme
 runtime/syntax/typescriptcommon.vim	@HerringtonDarkholme
 runtime/syntax/typescriptreact.vim	@HerringtonDarkholme
+runtime/syntax/unison.vim		@chuwy
 runtime/syntax/vdf.vim			@ObserverOfTime
 runtime/syntax/vim.vim			@cecamp
 runtime/syntax/vroom.vim		@dbarnett

.github/labeler.yml

@@ -0,0 +1,58 @@
+# list of labels and minimatch globs to match to apply the label.
+
+CI:
+- any: ['.cirrus.yml']
+- any: ['.github/**']
+- any: ['.appveyor.yml']
+- any: ['.codecov.yml']
+
+translation:
+- any: ['src/po/*.po']
+
+if_lua:
+- any: ['src/if_lua.c']
+- any: ['src/proto/if_lua.pro']
+- any: ['runtime/doc/if_lua.txt']
+
+if_mzscheme:
+- any: ['src/if_mzsch.c']
+- any: ['src/if_mzsch.h']
+- any: ['src/proto/if_mzsch.pro']
+- any: ['runtime/doc/if_mzsch.txt']
+
+if_perl:
+- any: ['src/if_perl.xs']
+- any: ['src/if_perlsfio.c']
+- any: ['src/proto/if_perl.pro']
+- any: ['src/proto/if_perlsfio.pro']
+- any: ['runtime/doc/if_perl.txt']
+
+if_python:
+- any: ['src/if_py_both.h']
+- any: ['runtime/doc/if_pyth.txt']
+- any: ['src/if_python.c']
+- any: ['src/if_python3.c']
+- any: ['src/proto/if_python.pro']
+- any: ['src/proto/if_python3.pro']
+
+if_ruby:
+- any: ['src/if_ruby.c']
+- any: ['src/proto/if_ruby.pro']
+- any: ['runtime/doc/if_ruby.txt']
+
+if_tcl:
+- any: ['src/if_tcl.c']
+- any: ['src/proto/if_tcl.pro']
+- any: ['runtime/doc/if_tcl.txt']
+
+runtime:
+- any: ['runtime/ftplugin']
+- any: ['runtime/syntax']
+- any: ['runtime/indent']
+- any: ['runtime/pack/dist/opt/termdebug/plugin/termdebug.vim']
+
+termdebug: runtime/pack/dist/opt/termdebug/plugin/termdebug.vim
+
+netrw:
+- any: ['runtime/plugin/netrwPlugin.vim']
+- any: ['runtime/autoload/netrw*']

.github/workflows/ci.yml

@@ -38,6 +38,7 @@ jobs:
         features: [tiny, normal, huge]
         compiler: [clang, gcc]
         extra: [none]
+        luaver: [lua5.4]
         include:
           - features: tiny
             compiler: clang
@@ -54,13 +55,18 @@ jobs:
             coverage: true
             extra: testgui
             uchar: true
+            luaver: lua5.4
           - features: huge
             compiler: clang
             extra: asan
+            # Lua5.1 is the most widely used version (since it's what LuaJIT is
+            # compatible with), so ensure it works
+            luaver: lua5.1
           - features: huge
             compiler: gcc
             coverage: true
             extra: unittests
+            luaver: lua5.4
           - features: normal
             compiler: gcc
             extra: vimtags
@@ -85,8 +91,8 @@ jobs:
               libperl-dev \
               python2-dev \
               python3-dev \
-              liblua5.4-dev \
-              lua5.4 \
+              lib${{ matrix.luaver }}-dev \
+              ${{ matrix.luaver }} \
               ruby-dev \
               tcl-dev \
               cscope \
@@ -178,17 +184,16 @@ jobs:
         if: (!(contains(matrix.extra, 'unittests') || contains(matrix.extra, 'vimtags')))
         env:
           DEST_DIR: ${{ env.TMPDIR }}/linux-modules-extra-${{ env.LINUX_VERSION }}
+        uses: tecolicom/actions-use-apt-tools@main
+        with:
+          tools: linux-modules-extra-${{ env.LINUX_VERSION }}
+          path: "${DEST_DIR}"
+
+      - name: modprobe snd-dummy
+        if: (!(contains(matrix.extra, 'unittests') || contains(matrix.extra, 'vimtags')))
         run: |
-          cd /lib/modules/${{ env.LINUX_VERSION }}
-          if apt-cache show linux-modules-extra-${{ env.LINUX_VERSION }} >/dev/null 2>&1 ; then
-          sudo apt-get install -d -y linux-modules-extra-${{ env.LINUX_VERSION }}
-          sudo dpkg -x /var/cache/apt/archives/linux-modules-extra-${{ env.LINUX_VERSION }}*.deb "${DEST_DIR}"
-          tar -cvC "${DEST_DIR}"/lib/modules/${{ env.LINUX_VERSION }} kernel/sound | sudo tar -x
           sudo depmod --verbose
           sudo modprobe --verbose snd-dummy
-          else
-          echo "Module " linux-modules-extra-${{ env.LINUX_VERSION }} "doesn't seem to exist, continue anyway"; exit 0
-          fi
 
       - name: Check autoconf
         if: contains(matrix.extra, 'unittests')
@@ -226,7 +231,7 @@ jobs:
           "${SRCDIR}"/vim -u NONE -i NONE --not-a-term -esNX -V1 -S ci/if_ver-2.vim -c quit
 
       - name: Test
-        timeout-minutes: 20
+        timeout-minutes: 25
         run: |
           do_test() { sg audio "sg $(id -gn) '$*'"; }
           do_test make ${SHADOWOPT} ${TEST}
@@ -276,7 +281,6 @@ jobs:
         run: |
           brew install lua
           echo "LUA_PREFIX=/usr/local" >> $GITHUB_ENV
-          brew uninstall perl
 
       - name: Set up environment
         run: |

.github/workflows/label.yml

@@ -0,0 +1,24 @@
+# This workflow will triage pull requests and apply a label based on the
+# paths that are modified in the pull request.
+#
+# To use this workflow, you will need to set up a .github/labeler.yml
+# file with configuration.  For more information, see:
+# https://github.com/actions/labeler
+
+name: Labeler
+on: [pull_request_target]
+
+jobs:
+  label:
+
+    runs-on: ubuntu-latest
+    permissions:
+      contents: read
+      pull-requests: write
+
+    steps:
+    - uses: actions/labeler@v4
+      with:
+        repo-token: "${{ secrets.GITHUB_TOKEN }}"
+        configuration-path: .github/labeler.yml
+        sync-labels: ''

LICENSE

@@ -21,8 +21,8 @@ II) It is allowed to distribute a modified (or extended) version of Vim,
           maintainer will do with your changes and under what license they
           will be distributed is negotiable.  If there has been no negotiation
           then this license, or a later version, also applies to your changes.
-          The current maintainer is Bram Moolenaar <Bram@vim.org>.  If this
-          changes it will be announced in appropriate places (most likely
+          The current maintainers are listed here: https://github.com/orgs/vim/people.
+          If this changes it will be announced in appropriate places (most likely
           vim.sf.net, www.vim.org and/or comp.editors). When it is completely
           impossible to contact the maintainer, the obligation to send him
           your changes ceases.  Once the maintainer has confirmed that he has

README.md

@@ -1,17 +1,21 @@
-[![Vim Logo](https://github.com/vim/vim/raw/master/runtime/vimlogo.gif)](https://www.vim.org)
+# [![Vim The editor](https://github.com/vim/vim/raw/master/runtime/vimlogo.gif)](https://www.vim.org)
 
-[![Github Build status](https://github.com/vim/vim/workflows/GitHub%20CI/badge.svg)](https://github.com/vim/vim/actions?query=workflow%3A%22GitHub+CI%22) [![Appveyor Build status](https://ci.appveyor.com/api/projects/status/o2qht2kjm02sgghk?svg=true)](https://ci.appveyor.com/project/chrisbra/vim) [![Cirrus Build Status](https://api.cirrus-ci.com/github/vim/vim.svg)](https://cirrus-ci.com/github/vim/vim) [![Coverage Status](https://codecov.io/gh/vim/vim/coverage.svg?branch=master)](https://codecov.io/gh/vim/vim?branch=master) [![Coverity Scan](https://scan.coverity.com/projects/241/badge.svg)](https://scan.coverity.com/projects/vim) [![Debian CI](https://badges.debian.net/badges/debian/testing/vim/version.svg)](https://buildd.debian.org/vim) [![Packages](https://repology.org/badge/tiny-repos/vim.svg)](https://repology.org/metapackage/vim) [![Fossies codespell report](https://fossies.org/linux/test/vim-master.tar.gz/codespell.svg)](https://fossies.org/linux/test/vim-master.tar.gz/codespell.html)
-
-<sub>For translations of this README see the end.</sub>
+[![Github Build status](https://github.com/vim/vim/workflows/GitHub%20CI/badge.svg)](https://github.com/vim/vim/actions?query=workflow%3A%22GitHub+CI%22)
+[![Appveyor Build status](https://ci.appveyor.com/api/projects/status/o2qht2kjm02sgghk?svg=true)](https://ci.appveyor.com/project/chrisbra/vim)
+[![Cirrus Build Status](https://api.cirrus-ci.com/github/vim/vim.svg)](https://cirrus-ci.com/github/vim/vim)
+[![Coverage Status](https://codecov.io/gh/vim/vim/coverage.svg?branch=master)](https://codecov.io/gh/vim/vim?branch=master)
+[![Coverity Scan](https://scan.coverity.com/projects/241/badge.svg)](https://scan.coverity.com/projects/vim)
+[![Debian CI](https://badges.debian.net/badges/debian/testing/vim/version.svg)](https://buildd.debian.org/vim)
+[![Packages](https://repology.org/badge/tiny-repos/vim.svg)](https://repology.org/metapackage/vim)
+[![Fossies codespell report](https://fossies.org/linux/test/vim-master.tar.gz/codespell.svg)](https://fossies.org/linux/test/vim-master.tar.gz/codespell.html)
 
 If you find a bug or want to discuss the best way to add a new feature, please
-open an [issue](https://github.com/vim/vim/issues).
+[open an issue](https://github.com/vim/vim/issues/new/choose).
 If you have a question or want to discuss the best way to do something with
 Vim, you can use [StackExchange](https://vi.stackexchange.com/)
 or one of the [Maillists](https://www.vim.org/community.php).
 
-
-## What is Vim? ##
+## What is Vim?
 
 Vim is a greatly improved version of the good old UNIX editor
 [Vi](https://en.wikipedia.org/wiki/Vi).  Many new
@@ -35,7 +39,7 @@ Amiga DOS, Atari MiNT, BeOS, RISC OS and OS/2.  These are no longer maintained.
 
 For Vim9 script see [README_VIM9](README_VIM9.md).
 
-## Distribution ##
+## Distribution
 
 You can often use your favorite package manager to install Vim.  On Mac and
 Linux a small version of Vim is pre-installed, you still need to install Vim
@@ -55,48 +59,45 @@ Some popular places to get the latest Vim:
 * Get a Windows executable from the
 [vim-win32-installer](https://github.com/vim/vim-win32-installer/releases) repository.
 
-
-
-## Compiling ##
+## Compiling
 
 If you obtained a binary distribution you don't need to compile Vim.  If you
 obtained a source distribution, all the stuff for compiling Vim is in the
-[`src`](/src) directory.  See [`src/INSTALL`](src/INSTALL) for instructions.
+[`src`](./src/) directory.  See [`src/INSTALL`](./src/INSTALL) for instructions.
 
-
-## Installation ##
+## Installation
 
 See one of these files for system-specific instructions.  Either in the
 [READMEdir directory](./READMEdir/) (in the repository) or
 the top directory (if you unpack an archive):
 
-	README_ami.txt		Amiga
-	README_unix.txt		Unix
-	README_dos.txt		MS-DOS and MS-Windows
-	README_mac.txt		Macintosh
-	README_haiku.txt	Haiku
-	README_vms.txt		VMS
+```
+README_ami.txt		Amiga
+README_unix.txt		Unix
+README_dos.txt		MS-DOS and MS-Windows
+README_mac.txt		Macintosh
+README_haiku.txt	Haiku
+README_vms.txt		VMS
+```
 
 There are other `README_*.txt` files, depending on the distribution you used.
 
-
-## Documentation ##
+## Documentation
 
 The Vim tutor is a one hour training course for beginners.  Often it can be
 started as `vimtutor`.  See `:help tutor` for more information.
 
 The best is to use `:help` in Vim.  If you don't have an executable yet, read
-[`runtime/doc/help.txt`](/runtime/doc/help.txt).
+[`runtime/doc/help.txt`](./runtime/doc/help.txt).
 It contains pointers to the other documentation files.
 The User Manual reads like a book and is recommended to learn to use
 Vim.  See `:help user-manual`.
 
-
-## Copying ##
+## Copying
 
 Vim is Charityware.  You can use and copy it as much as you like, but you are
 encouraged to make a donation to help orphans in Uganda.  Please read the file
-[`runtime/doc/uganda.txt`](runtime/doc/uganda.txt)
+[`runtime/doc/uganda.txt`](./runtime/doc/uganda.txt)
 for details (do `:help uganda` inside Vim).
 
 Summary of the license: There are no restrictions on using or distributing an
@@ -105,28 +106,25 @@ text must always be included.  For modified versions, a few restrictions apply.
 The license is GPL compatible, you may compile Vim with GPL libraries and
 distribute it.
 
-
-## Sponsoring ##
+## Sponsoring
 
 Fixing bugs and adding new features takes a lot of time and effort.  To show
 your appreciation for the work and motivate Bram and others to continue
 working on Vim please send a donation.
 
 Since Bram is back to a paid job the money will now be used to help children
-in Uganda.  See [`runtime/doc/uganda.txt`](runtime/doc/uganda.txt).  But
+in Uganda.  See [`runtime/doc/uganda.txt`](./runtime/doc/uganda.txt).  But
 at the same time donations increase Bram's motivation to keep working on Vim!
 
 For the most recent information about sponsoring look on the Vim web site:
 	https://www.vim.org/sponsor/
 
-
-## Contributing ##
+## Contributing
 
 If you would like to help make Vim better, see the
-[CONTRIBUTING.md](/CONTRIBUTING.md) file.
+[CONTRIBUTING.md](./CONTRIBUTING.md) file.
 
-
-## Information ##
+## Information
 
 If you are on macOS, you can use [Macvim](https://macvim-dev.github.io/macvim/).
 
@@ -141,14 +139,15 @@ If you still have problems or any other questions, use one of the mailing
 lists to discuss them with Vim users and developers:
 	https://www.vim.org/maillist.php
 
-If nothing else works, report bugs directly:
-	Bram Moolenaar <Bram@vim.org>
+If nothing else works, report bugs directly to the vim-dev mailing list:
+	`<vim-dev@vim.org>`
 
+## Main author
 
-## Main author ##
-
-Send any other comments, patches, flowers and suggestions to:
-	Bram Moolenaar <Bram@vim.org>
+Most of Vim was created by Bram Moolenaar `<Bram@vim.org>`
+[Bram-Moolenaar](https://vimhelp.org/version9.txt.html#Bram-Moolenaar)
 
+Send any other comments, patches, flowers and suggestions to the vim-dev mailing list:
+	`<vim-dev@vim.org>`
 
 This is `README.md` for version 9.0 of Vim: Vi IMproved.

README.txt

@@ -122,12 +122,14 @@ If you still have problems or any other questions, use one of the mailing
 lists to discuss them with Vim users and developers:
 	https://www.vim.org/maillist.php
 
-If nothing else works, report bugs directly:
-	Bram Moolenaar <Bram@vim.org>
+If nothing else works, report bugs directly to the vim-dev mailing list:
+	<vim-dev@vim.org>
 
 
 MAIN AUTHOR
 
-Send any other comments, patches, flowers and suggestions to:
+Most of Vim was created by Bram Moolenaar <Bram@vim.org> |Bram-Moolenaar|
 
-	Bram Moolenaar		E-mail:	Bram@vim.org
+Send any other comments, patches, flowers and suggestions to the vim-dev mailing list:
+
+	<vim-dev@vim.org>

SECURITY.md

@@ -0,0 +1,8 @@
+# Security Policy
+
+## Reporting a vulnerability
+
+If you want to report a security issue, please use [huntr.dev](https://huntr.dev/bounties/disclose?target=https%3A%2F%2Fgithub.com%2Fvim%2Fvim) to privately disclose the issue to us.
+They also have rewards in the form of money, swag and CVEs.
+
+**Please don't publicly disclose the issue until it has been addressed by us.**

ci/config.mk.sed

@@ -1,3 +1,3 @@
 /^CFLAGS[[:blank:]]*=/s/$/ -Wall -Wextra -Wshadow -Werror/
-/^PERL_CFLAGS_EXTRA[[:blank:]]*=/s/$/ -Wno-error=unused-function/
+/^PERL_CFLAGS_EXTRA[[:blank:]]*=/s/$/ -Wno-error=unused-function -Wno-shadow/
 /^RUBY_CFLAGS_EXTRA[[:blank:]]*=/s/$/ -Wno-error=unused-parameter/

runtime/autoload/ccomplete.vim

@@ -1,10 +1,11 @@
 vim9script noclear
 
 # Vim completion script
-# Language:     C
-# Maintainer:   Bram Moolenaar <Bram@vim.org>
+# Language:	C
+# Maintainer:	The Vim Project <https://github.com/vim/vim>
+# Last Change:	2023 Aug 10
 #		Rewritten in Vim9 script by github user lacygoill
-# Last Change:  2022 Jan 31
+# Former Maintainer:   Bram Moolenaar <Bram@vim.org>
 
 var prepended: string
 var grepCache: dict<list<dict<any>>>

runtime/autoload/dist/ft.vim

@@ -2,8 +2,9 @@ vim9script
 
 # Vim functions for file type detection
 #
-# Maintainer:	Bram Moolenaar <Bram@vim.org>
-# Last Change:	2023 Jun 09
+# Maintainer:	The Vim Project <https://github.com/vim/vim>
+# Last Change:	2023 Aug 10
+# Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 # These functions are moved here from runtime/filetype.vim to make startup
 # faster.

runtime/autoload/dist/man.vim

@@ -3,7 +3,7 @@
 " Maintainer:	Jason Franklin <vim@justemail.net>
 " Maintainer:	SungHyun Nam <goweol@gmail.com>
 " Autoload Split: Bram Moolenaar
-" Last Change: 	2022 Jun 18
+" Last Change: 	2023 Jun 28
 
 let s:cpo_save = &cpo
 set cpo-=C
@@ -21,31 +21,65 @@ catch /E145:/
   " Ignore the error in restricted mode
 endtry
 
+func s:ParseIntoPageAndSection()
+  " Accommodate a reference that terminates in a hyphen.
+  "
+  " See init_charset_table() at
+  " https://git.savannah.gnu.org/cgit/groff.git/tree/src/roff/troff/input.cpp?h=1.22.4#n6794
+  "
+  " See can_break_after() at
+  " https://git.savannah.gnu.org/cgit/groff.git/tree/src/roff/troff/charinfo.h?h=1.22.4#n140
+  "
+  " Assumptions and limitations:
+  " 1) Manual-page references (in consequence of command-related filenames)
+  "    do not contain non-ASCII HYPHENs (0x2010), any terminating HYPHEN
+  "    must have been introduced to mark division of a word at the end of
+  "    a line and can be discarded; whereas similar references may contain
+  "    ASCII HYPHEN-MINUSes (0x002d) and any terminating HYPHEN-MINUS forms
+  "    a compound word in addition to marking word division.
+  " 2) Well-formed manual-page references always have a section suffix, e.g.
+  "    "git-commit(1)", therefore suspended hyphenated compounds are not
+  "    determined, e.g.     [V] (With cursor at _git-merge-_ below...)
+  "    ".................... git-merge- and git-merge-base. (See git-cherry-
+  "    pick(1) and git-cherry(1).)" (... look up "git-merge-pick(1)".)
+  "
+  " Note that EM DASH (0x2014), a third stooge from init_charset_table(),
+  " neither connects nor divides parts of a word.
+  let str = expand("<cWORD>")
+
+  if str =~ '\%u2010$'	" HYPHEN (-1).
+    let str = strpart(str, 0, strridx(str, "\u2010"))
+
+    " Append the leftmost WORD (or an empty string) from the line below.
+    let str .= get(split(get(getbufline(bufnr('%'), line('.') + 1), 0, '')), 0, '')
+  elseif str =~ '-$'	" HYPHEN-MINUS.
+    " Append the leftmost WORD (or an empty string) from the line below.
+    let str .= get(split(get(getbufline(bufnr('%'), line('.') + 1), 0, '')), 0, '')
+  endif
+
+  " According to man(1), section name formats vary (MANSECT):
+  " 1 n l 8 3 2 3posix 3pm 3perl 3am 5 4 9 6 7
+  let parts = matchlist(str, '\(\k\+\)(\(\k\+\))')
+  return (len(parts) > 2)
+	  \ ? {'page': parts[1], 'section': parts[2]}
+	  \ : {'page': matchstr(str, '\k\+'), 'section': ''}
+endfunc
+
 func dist#man#PreGetPage(cnt)
   if a:cnt == 0
-    let old_isk = &iskeyword
-    if &ft == 'man'
-      setl iskeyword+=(,)
-    endif
-    let str = expand("<cword>")
-    let &l:iskeyword = old_isk
-    let page = substitute(str, '(*\(\k\+\).*', '\1', '')
-    let sect = substitute(str, '\(\k\+\)(\([^()]*\)).*', '\2', '')
-    if match(sect, '^[0-9 ]\+$') == -1
-      let sect = ""
-    endif
-    if sect == page
-      let sect = ""
-    endif
+    let what = s:ParseIntoPageAndSection()
+    let sect = what.section
+    let page = what.page
   else
+    let what = s:ParseIntoPageAndSection()
     let sect = a:cnt
-    let page = expand("<cword>")
+    let page = what.page
   endif
+
   call dist#man#GetPage('', sect, page)
 endfunc
 
 func s:GetCmdArg(sect, page)
-
   if empty(a:sect)
     return shellescape(a:page)
   endif
@@ -75,9 +109,11 @@ func dist#man#GetPage(cmdmods, ...)
     return
   endif
 
-  " To support:	    nmap K :Man <cword>
-  if page == '<cword>'
-    let page = expand('<cword>')
+  " To support:	    nmap K :Man <cWORD><CR>
+  if page ==? '<cword>'
+    let what = s:ParseIntoPageAndSection()
+    let sect = what.section
+    let page = what.page
   endif
 
   if !exists('g:ft_man_no_sect_fallback') || (g:ft_man_no_sect_fallback == 0)
@@ -180,9 +216,10 @@ func dist#man#PopPage()
     exec "let s:man_tag_buf=s:man_tag_buf_".s:man_tag_depth
     exec "let s:man_tag_lin=s:man_tag_lin_".s:man_tag_depth
     exec "let s:man_tag_col=s:man_tag_col_".s:man_tag_depth
+
     exec s:man_tag_buf."b"
-    exec s:man_tag_lin
-    exec "norm! ".s:man_tag_col."|"
+    call cursor(s:man_tag_lin, s:man_tag_col)
+
     exec "unlet s:man_tag_buf_".s:man_tag_depth
     exec "unlet s:man_tag_lin_".s:man_tag_depth
     exec "unlet s:man_tag_col_".s:man_tag_depth

runtime/autoload/dist/script.vim

@@ -3,8 +3,9 @@ vim9script
 # Vim function for detecting a filetype from the file contents.
 # Invoked from "scripts.vim" in 'runtimepath'
 #
-# Maintainer:	Bram Moolenaar <Bram@vim.org>
-# Last Change:	2023 Jun 09
+# Maintainer:	The Vim Project <https://github.com/vim/vim>
+# Last Change:	2023 Aug 10
+# Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 export def DetectFiletype()
   var line1 = getline(1)

runtime/autoload/dist/vimindent.vim

@@ -2,7 +2,7 @@ vim9script
 
 # Language:     Vim script
 # Maintainer:   github user lacygoill
-# Last Change:  2023 Feb 01
+# Last Change:  2023 Jun 29
 
 # NOTE: Whenever you change the code, make sure the tests are still passing:
 #
@@ -112,10 +112,6 @@ const DICT_KEY: string = '^\s*\%('
     .. '\)'
     .. ':\%(\s\|$\)'
 
-# NOT_A_DICT_KEY {{{3
-
-const NOT_A_DICT_KEY: string = ':\@!'
-
 # END_OF_COMMAND {{{3
 
 const END_OF_COMMAND: string = $'\s*\%($\|||\@!\|{INLINE_COMMENT}\)'
@@ -197,13 +193,13 @@ patterns =<< trim eval END
     ldo\=\>!\=
     tabdo\=\>
     windo\>
-    au\%[tocmd]\>.*
-    com\%[mand]\>.*
+    au\%[tocmd]\>!\=.*
+    com\%[mand]\>!\=.*
     g\%[lobal]!\={PATTERN_DELIMITER}.*
     v\%[global]!\={PATTERN_DELIMITER}.*
 END
 
-const HIGHER_ORDER_COMMAND: string = $'\%(^\|{BAR_SEPARATION}\)\s*\<\%({patterns->join('\|')}\){NOT_A_DICT_KEY}'
+const HIGHER_ORDER_COMMAND: string = $'\%(^\|{BAR_SEPARATION}\)\s*\<\%({patterns->join('\|')}\)\%(\s\|$\)\@='
 
 # START_MIDDLE_END {{{3
 
@@ -254,7 +250,7 @@ START_MIDDLE_END = START_MIDDLE_END
         kwds->map((_, kwd: string) => kwd == ''
         ? ''
         : $'\%(^\|{BAR_SEPARATION}\|\<sil\%[ent]\|{HIGHER_ORDER_COMMAND}\)\s*'
-        .. $'\<\%({kwd}\)\>\%(\s*{OPERATOR}\)\@!'))
+        .. $'\<\%({kwd}\)\>\%(\s\|$\|!\)\@=\%(\s*{OPERATOR}\)\@!'))
 
 lockvar! START_MIDDLE_END
 
@@ -279,7 +275,7 @@ patterns = BLOCKS
 
 const ENDS_BLOCK_OR_CLAUSE: string = '^\s*\%(' .. patterns->join('\|') .. $'\){END_OF_COMMAND}'
     .. $'\|^\s*cat\%[ch]\%(\s\+\({PATTERN_DELIMITER}\).*\1\)\={END_OF_COMMAND}'
-    .. $'\|^\s*elseif\=\>\%({OPERATOR}\)\@!'
+    .. $'\|^\s*elseif\=\>\%(\s\|$\)\@=\%(\s*{OPERATOR}\)\@!'
 
 # STARTS_NAMED_BLOCK {{{3
 
@@ -296,7 +292,7 @@ patterns = []
     endfor
 }
 
-const STARTS_NAMED_BLOCK: string = $'^\s*\%(sil\%[ent]\s\+\)\=\%({patterns->join('\|')}\)\>{NOT_A_DICT_KEY}'
+const STARTS_NAMED_BLOCK: string = $'^\s*\%(sil\%[ent]\s\+\)\=\%({patterns->join('\|')}\)\>\%(\s\|$\|!\)\@='
 
 # STARTS_CURLY_BLOCK {{{3
 
@@ -312,7 +308,7 @@ const STARTS_CURLY_BLOCK: string = '\%('
 
 # STARTS_FUNCTION {{{3
 
-const STARTS_FUNCTION: string = $'^\s*\%({MODIFIERS.def}\)\=def\>{NOT_A_DICT_KEY}'
+const STARTS_FUNCTION: string = $'^\s*\%({MODIFIERS.def}\)\=def\>!\=\s\@='
 
 # ENDS_FUNCTION {{{3
 

runtime/autoload/gzip.vim

@@ -1,6 +1,7 @@
 " Vim autoload file for editing compressed files.
-" Maintainer: Bram Moolenaar <Bram@vim.org>
-" Last Change: 2016 Sep 28
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer: Bram Moolenaar <Bram@vim.org>
 
 " These functions are used by the gzip plugin.
 

runtime/autoload/paste.vim

@@ -1,6 +1,7 @@
 " Vim support file to help with paste mappings and menus
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2019 Jan 27
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Define the string to use for items that are present both in Edit, Popup and
 " Toolbar menu.  Also used in mswin.vim and macmap.vim.

runtime/autoload/rust.vim

@@ -1,4 +1,4 @@
-" Author: Kevin Ballard
+" Author: Lily Ballard
 " Description: Helper functions for Rust commands/mappings
 " Last Modified: May 27, 2014
 " For bugs, patches and license go to https://github.com/rust-lang/rust.vim

runtime/autoload/spellfile.vim

@@ -1,6 +1,7 @@
 " Vim script to download a missing spell file
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2020 Jul 10
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 if !exists('g:spellfile_URL')
   " Always use https:// because it's secure.  The certificate is for nluug.nl,

runtime/bugreport.vim

@@ -1,8 +1,9 @@
 :" Use this script to create the file "bugreport.txt", which contains
 :" information about the environment of a possible bug in Vim.
 :"
-:" Maintainer:	Bram Moolenaar <Bram@vim.org>
-:" Last change:	2019 Jan 27
+:" Maintainer:	The Vim Project <https://github.com/vim/vim>
+:" Last change:	2023 Aug 10
+:" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 :"
 :" To use inside Vim:
 :"	:so $VIMRUNTIME/bugreport.vim

runtime/colors/default.vim

@@ -1,6 +1,7 @@
 " Vim color file
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2001 Jul 23
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " This is the default color scheme.  It doesn't define the Normal
 " highlighting, it uses whatever the colors used to be.

runtime/compiler/README.txt

@@ -8,4 +8,4 @@ If you want to write your own compiler plugin, have a look at the other files
 for how to do it, the format is simple.
 
 If you think a compiler plugin you have written is useful for others, please
-send it to Bram@vim.org.
+send it to the vim-dev mailing list: <vim-dev@vim.org>

runtime/compiler/msvc.vim

@@ -1,7 +1,8 @@
 " Vim compiler file
 " Compiler:	Microsoft Visual C
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2014 Sep 20
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 if exists("current_compiler")
   finish

runtime/defaults.vim

@@ -1,7 +1,8 @@
 " The default vimrc file.
 "
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last change:	2023 May 10
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 "
 " This is loaded if no vimrc file was found.
 " Except when Vim is run with "-u NONE" or "-C".
@@ -97,17 +98,21 @@ if 1
   filetype plugin indent on
 
   " Put these in an autocmd group, so that you can revert them with:
-  " ":augroup vimStartup | exe 'au!' | augroup END"
+  " ":autocmd! vimStartup"
   augroup vimStartup
-    au!
+    autocmd!
 
     " When editing a file, always jump to the last known cursor position.
     " Don't do it when the position is invalid, when inside an event handler
-    " (happens when dropping a file on gvim) and for a commit message (it's
-    " likely a different one than last time).
+    " (happens when dropping a file on gvim), for a commit or rebase message
+    " (likely a different one than last time), and when using xxd(1) to filter
+    " and edit binary files (it transforms input files back and forth, causing
+    " them to have dual nature, so to speak)
     autocmd BufReadPost *
-      \ if line("'\"") >= 1 && line("'\"") <= line("$") && &ft !~# 'commit'
-      \ |   exe "normal! g`\""
+      \ let line = line("'\"")
+      \ | if line >= 1 && line <= line("$") && &filetype !~# 'commit'
+      \      && index(['xxd', 'gitrebase'], &filetype) == -1
+      \ |   execute "normal! g`\""
       \ | endif
 
   augroup END
@@ -115,11 +120,11 @@ if 1
   " Quite a few people accidentally type "q:" instead of ":q" and get confused
   " by the command line window.  Give a hint about how to get out.
   " If you don't like this you can put this in your vimrc:
-  " ":augroup vimHints | exe 'au!' | augroup END"
+  " ":autocmd! vimHints"
   augroup vimHints
     au!
     autocmd CmdwinEnter *
-	  \ echohl Todo | 
+	  \ echohl Todo |
 	  \ echo gettext('You discovered the command-line window! You can close it with ":q".') |
 	  \ echohl None
   augroup END

runtime/delmenu.vim

@@ -1,8 +1,9 @@
 " This Vim script deletes all the menus, so that they can be redefined.
 " Warning: This also deletes all menus defined by the user!
 "
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2019 Dec 10
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 aunmenu *
 tlunmenu *

runtime/doc/builtin.txt

@@ -1,4 +1,4 @@
-*builtin.txt*	For Vim version 9.0.  Last change: 2023 Jun 08
+*builtin.txt*	For Vim version 9.0.  Last change: 2023 Aug 09
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -156,6 +156,7 @@ digraph_setlist({digraphlist})	Boolean	register multiple |digraph|s
 echoraw({expr})			none	output {expr} as-is
 empty({expr})			Number	|TRUE| if {expr} is empty
 environ()			Dict	return environment variables
+err_teapot([{expr}])		none	give E418, or E503 if {expr} is |TRUE|
 escape({string}, {chars})	String	escape {chars} in {string} with '\'
 eval({string})			any	evaluate {string} into its value
 eventhandler()			Number	|TRUE| if inside an event handler
@@ -706,13 +707,14 @@ trunc({expr})			Float	truncate Float {expr}
 type({expr})			Number	type of value {expr}
 typename({expr})		String	representation of the type of {expr}
 undofile({name})		String	undo file name for {name}
-undotree()			List	undo file tree
+undotree([{buf}])		List	undo file tree for buffer {buf}
 uniq({list} [, {func} [, {dict}]])
 				List	remove adjacent duplicates from a list
 utf16idx({string}, {idx} [, {countcc} [, {charidx}]])
 				Number	UTF-16 index of byte {idx} in {string}
 values({dict})			List	values in {dict}
-virtcol({expr} [, {list}])	Number or List
+virtcol({expr} [, {list} [, {winid}])
+				Number or List
 					screen column of cursor or mark
 virtcol2col({winid}, {lnum}, {col})
 				Number  byte index of a character on screen
@@ -1248,7 +1250,7 @@ bufload({buf})						*bufload()*
 		refers to an existing file then the file is read.  Otherwise
 		the buffer will be empty.  If the buffer was already loaded
 		then there is no change.  If the buffer is not related to a
-		file the no file is read (e.g., when 'buftype' is "nofile").
+		file then no file is read (e.g., when 'buftype' is "nofile").
 		If there is an existing swap file for the file of the buffer,
 		there will be no dialog, the buffer will be loaded anyway.
 		The {buf} argument is used like with |bufexists()|.
@@ -2201,6 +2203,15 @@ environ()						*environ()*
 		use this: >
 			:echo index(keys(environ()), 'HOME', 0, 1) != -1
 
+
+err_teapot([{expr}])					*err_teapot()*
+		Produce an error with number 418, needed for implementation of
+		RFC 2325.
+		If {expr} is present and it is TRUE error 503 is given,
+		indicating that coffee is temporarily not available.
+		If {expr} is present it must be a String.
+
+
 escape({string}, {chars})				*escape()*
 		Escape the characters in {chars} that occur in {string} with a
 		backslash.  Example: >
@@ -3992,6 +4003,9 @@ getqflist([{what}])					*getqflist()*
 			text	description of the error
 			type	type of the error, 'E', '1', etc.
 			valid	|TRUE|: recognized error message
+		        user_data
+			        custom data associated with the item, can be
+				any type.
 
 		When there is no error list or it's empty, an empty list is
 		returned. Quickfix list entries with a non-existing buffer
@@ -6577,7 +6591,11 @@ printf({fmt}, {expr1} ...)				*printf()*
 		The "%" starts a conversion specification.  The following
 		arguments appear in sequence:
 
-			%  [flags]  [field-width]  [.precision]  type
+			% [pos-argument] [flags] [field-width] [.precision] type
+
+		pos-argument
+			At most one positional argument specifier. These
+			take the form {n$}, where n is >= 1.
 
 		flags
 			Zero or more of the following flags:
@@ -6649,6 +6667,13 @@ printf({fmt}, {expr1} ...)				*printf()*
 <		This limits the length of the text used from "line" to
 		"width" bytes.
 
+		If the argument to be formatted is specified using a posional
+		argument specifier, and a '*' is used to indicate that a
+		number argument is to be used to specify the width or
+		precision, the argument(s) to be used must also be specified
+		using a {n$} positional argument specifier. See |printf-$|.
+
+
 		The conversion specifiers and their meanings are:
 
 				*printf-d* *printf-b* *printf-B* *printf-o*
@@ -6738,6 +6763,103 @@ printf({fmt}, {expr1} ...)				*printf()*
 		of "%" items.  If there are not sufficient or too many
 		arguments an error is given.  Up to 18 arguments can be used.
 
+							*printf-$*
+		In certain languages, error and informative messages are
+		more readable when the order of words is different from the
+		corresponding message in English. To accomodate translations
+		having a different word order, positional arguments may be
+		used to indicate this. For instance: >
+
+			#, c-format
+			msgid "%s returning %s"
+			msgstr "waarde %2$s komt terug van %1$s"
+<
+		In this example, the sentence has its 2 string arguments reversed
+		in the output. >
+
+			echo printf(
+				"In The Netherlands, vim's creator's name is: %1$s %2$s",
+				"Bram", "Moolenaar")
+<			In The Netherlands, vim's creator's name is: Bram Moolenaar >
+
+			echo printf(
+				"In Belgium, vim's creator's name is: %2$s %1$s",
+				"Bram", "Moolenaar")
+<			In Belgium, vim's creator's name is: Moolenaar Bram
+
+		Width (and precision) can be specified using the '*' specifier.
+		In this case, you must specify the field width position in the
+		argument list. >
+
+			echo printf("%1$*2$.*3$d", 1, 2, 3)
+<			001 >
+			echo printf("%2$*3$.*1$d", 1, 2, 3)
+<			  2 >
+			echo printf("%3$*1$.*2$d", 1, 2, 3)
+<			03 >
+			echo printf("%1$*2$.*3$g", 1.4142, 2, 3)
+<			1.414
+
+		You can mix specifying the width and/or precision directly
+		and via positional arguments: >
+
+			echo printf("%1$4.*2$f", 1.4142135, 6)
+<			1.414214 >
+			echo printf("%1$*2$.4f", 1.4142135, 6)
+<			1.4142 >
+			echo printf("%1$*2$.*3$f", 1.4142135, 6, 2)
+<			  1.41
+
+							*E1400*
+		You cannot mix positional and non-positional arguments: >
+			echo printf("%s%1$s", "One", "Two")
+<			E1400: Cannot mix positional and non-positional
+			arguments: %s%1$s
+
+							*E1401*
+		You cannot skip a positional argument in a format string: >
+			echo printf("%3$s%1$s", "One", "Two", "Three")
+<			E1401: format argument 2 unused in $-style
+			format: %3$s%1$s
+
+							*E1402*
+		You can re-use a [field-width] (or [precision]) argument: >
+			echo printf("%1$d at width %2$d is: %01$*2$d", 1, 2)
+<			1 at width 2 is: 01
+
+		However, you can't use it as a different type: >
+			echo printf("%1$d at width %2$ld is: %01$*2$d", 1, 2)
+<			E1402: Positional argument 2 used as field
+			width reused as different type: long int/int
+
+							*E1403*
+		When a positional argument is used, but not the correct number
+		or arguments is given, an error is raised: >
+			echo printf("%1$d at width %2$d is: %01$*2$.*3$d", 1, 2)
+<			E1403: Positional argument 3 out of bounds:
+			%1$d at width %2$d is: %01$*2$.*3$d
+
+		Only the first error is reported: >
+			echo printf("%01$*2$.*3$d %4$d", 1, 2)
+<			E1403: Positional argument 3 out of bounds:
+			%01$*2$.*3$d %4$d
+
+							*E1404*
+		A positional argument can be used more than once: >
+			echo printf("%1$s %2$s %1$s", "One", "Two")
+<			One Two One
+
+		However, you can't use a different type the second time: >
+			echo printf("%1$s %2$s %1$d", "One", "Two")
+<			E1404: Positional argument 1 type used
+			inconsistently: int/string
+
+							*E1405*
+		Various other errors that lead to a format string being
+		wrongly formatted lead to: >
+			echo printf("%1$d at width %2$d is: %01$*2$.3$d", 1, 2)
+<			E1405: Invalid format specifier:
+			%1$d at width %2$d is: %01$*2$.3$d
 
 prompt_getprompt({buf})					*prompt_getprompt()*
 		Returns the effective prompt text for buffer {buf}.  {buf} can
@@ -8288,6 +8410,8 @@ setqflist({list} [, {action} [, {what}]])		*setqflist()*
 		    text	description of the error
 		    type	single-character error type, 'E', 'W', etc.
 		    valid	recognized error message
+		    user_data   custom data associated with the item, can be
+				any type.
 
 		The "col", "vcol", "nr", "type" and "text" entries are
 		optional.  Either "lnum" or "pattern" entry can be used to
@@ -10063,9 +10187,10 @@ undofile({name})					*undofile()*
 		Can also be used as a |method|: >
 			GetFilename()->undofile()
 
-undotree()						*undotree()*
-		Return the current state of the undo tree in a dictionary with
-		the following items:
+undotree([{buf}])					*undotree()*
+		Return the current state of the undo tree for the current
+		buffer, or for a specific buffer if {buf} is given.  The
+		result is a dictionary with the following items:
 		  "seq_last"	The highest undo sequence number used.
 		  "seq_cur"	The sequence number of the current position in
 				the undo tree.  This differs from "seq_last"
@@ -10159,7 +10284,7 @@ values({dict})						*values()*
 		Can also be used as a |method|: >
 			mydict->values()
 
-virtcol({expr} [, {list}])				*virtcol()*
+virtcol({expr} [, {list} [, {winid}]])			*virtcol()*
 		The result is a Number, which is the screen column of the file
 		position given with {expr}.  That is, the last screen position
 		occupied by the character at that position, when the screen
@@ -10191,10 +10316,13 @@ virtcol({expr} [, {list}])				*virtcol()*
 			    returns the cursor position.  Differs from |'<| in
 			    that it's updated right away.
 
-		If {list} is present and non-zero then virtcol() returns a List
-		with the first and last screen position occupied by the
+		If {list} is present and non-zero then virtcol() returns a
+		List with the first and last screen position occupied by the
 		character.
 
+		With the optional {winid} argument the values are obtained for
+		that window instead of the current window.
+
 		Note that only marks in the current file can be used.
 		Examples: >
 			" With text "foo^Lbar" and cursor on the "^L":
@@ -10206,7 +10334,7 @@ virtcol({expr} [, {list}])				*virtcol()*
 			" With text "	  there", with 't at 'h':
 
 			virtcol("'t")	" returns 6
-<		The first column is 1.  0 is returned for an error.
+<		The first column is 1.  0 or [0, 0] is returned for an error.
 		A more advanced example that echoes the maximum length of
 		all lines: >
 		    echo max(map(range(1, line('$')), "virtcol([v:val, '$'])"))
@@ -10223,6 +10351,9 @@ virtcol2col({winid}, {lnum}, {col})			*virtcol2col()*
 		{lnum}, then the byte index of the character at the last
 		virtual column is returned.
 
+		For a multi-byte character, the column number of the first
+		byte in the character is returned.
+
 		The {winid} argument can be the window number or the
 		|window-ID|. If this is zero, then the current window is used.
 

runtime/doc/filetype.txt

@@ -394,7 +394,7 @@ ways to change this:
    You must create a new filetype plugin in a directory early in
    'runtimepath'.  For Unix, for example you could use this file: >
 	vim ~/.vim/ftplugin/fortran.vim
-<  You can set those settings and mappings that you would like to add.  Note
+<   You can set those settings and mappings that you would like to add.  Note
    that the global plugin will be loaded after this, it may overrule the
    settings that you do here.  If this is the case, you need to use one of the
    following two methods.
@@ -403,7 +403,7 @@ ways to change this:
    You must put the copy in a directory early in 'runtimepath'.  For Unix, for
    example, you could do this: >
 	cp $VIMRUNTIME/ftplugin/fortran.vim ~/.vim/ftplugin/fortran.vim
-<  Then you can edit the copied file to your liking.  Since the b:did_ftplugin
+<   Then you can edit the copied file to your liking.  Since the b:did_ftplugin
    variable will be set, the global plugin will not be loaded.
    A disadvantage of this method is that when the distributed plugin gets
    improved, you will have to copy and modify it again.
@@ -412,7 +412,7 @@ ways to change this:
    You must create a new filetype plugin in a directory from the end of
    'runtimepath'.  For Unix, for example, you could use this file: >
 	vim ~/.vim/after/ftplugin/fortran.vim
-<  In this file you can change just those settings that you want to change.
+<   In this file you can change just those settings that you want to change.
 
 ==============================================================================
 3.  Docs for the default filetype plugins.		*ftplugin-docs*

runtime/doc/intro.txt

@@ -1,4 +1,4 @@
-*intro.txt*     For Vim version 9.0.  Last change: 2022 Nov 20
+*intro.txt*     For Vim version 9.0.  Last change: 2023 Aug 09
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -129,8 +129,9 @@ There are three ways to report bugs:
 3. Send bug reports to: Vim Developers <vim-dev@vim.org>
    This is a maillist, you need to become a member first and many people will
    see the message.  If you don't want that, e.g. because it is a security
-   issue, send it to <bugs@vim.org>, this only goes to the Vim maintainer
-   (that's Bram).
+   issue, please contact any of the current Vim maintainers
+   https://github.com/orgs/vim/people (but not Bram or the vim-dev ML).
+   In the future, a proper process for handling security issues will be setup.
 
 Please be brief; all the time that is spent on answering mail is subtracted
 from the time that is spent on improving Vim!  Always give a reproducible
@@ -181,9 +182,9 @@ The user may create scripts for Vim that use external commands.  These might
 introduce Y2K problems, but those are not really part of Vim itself.
 
 ==============================================================================
-3. Credits				*credits* *author* *Bram* *Moolenaar*
+3. Credits						*credits* *author*
 
-Most of Vim was created by Bram Moolenaar <Bram@vim.org>.
+Most of Vim was created by Bram Moolenaar <Bram@vim.org> |Bram-Moolenaar|
 
 Parts of the documentation come from several Vi manuals, written by:
 	W.N. Joy
@@ -216,7 +217,7 @@ Vim would never have become what it is now, without the help of these people!
 	Bill Foster		Athena GUI port (later removed)
 	Google			Lets me work on Vim one day a week
 	Loic Grenie		xvim (ideas for multi windows version)
-	Sven Guckes		Vim promoter and previous WWW page maintainer
+	Sven Guckes		Vim promoter and previous WWW page maintainer |Sven-Guckes|
 	Darren Hiebert		Exuberant ctags
 	Jason Hildebrand	GTK+ 2 port
 	Bruce Hunsaker		improvements for VMS port

runtime/doc/options.txt

@@ -252,6 +252,8 @@ opt+=val" the expansion is done before the adding or removing.
 
 Handling of local options			*local-options*
 
+Note: The following also applies to |global-local| options.
+
 Some of the options only apply to a window or buffer.  Each window or buffer
 has its own copy of this option, thus each can have its own value.  This
 allows you to set 'list' in one window but not in another.  And set
@@ -301,6 +303,30 @@ The options local to a window are remembered for each buffer.  This also
 happens when the buffer is not loaded, but they are lost when the buffer is
 wiped out |:bwipe|.
 
+Special local window options			*special-local-window-option*
+
+The following local window options won't be copied over when new windows are
+created, thus they behave slightly differently:
+
+	Option		Reason	~
+	'previewwindow'	there can only be a single one
+	'scroll'	specific to existing window
+	'winfixheight'	specific to existing window
+	'winfixwidth'	specific to existing window
+
+Special local buffer options			*special-local-buffer-option*
+
+The following local buffer options won't be copied over when new buffers are
+created, thus they behave slightly differently:
+
+	Option		Reason	~
+	'filetype'	explicitly set by autocommands
+	'syntax'	explicitly set by autocommands
+	'bufhidden'	denote |special-buffers|
+	'buftype'	denote |special-buffers|
+	'readonly'	will be detected automatically
+	'modified'	will be detected automatically
+
 							*:setl* *:setlocal*
 :setl[ocal][!] ...	Like ":set" but set only the value local to the
 			current buffer or window.  Not all options have a
@@ -374,7 +400,6 @@ used.  Thus it does the same as: >
 Note: In the future more global options can be made |global-local|.  Using
 ":setlocal" on a global option might work differently then.
 
-
 						*option-value-function*
 Some options ('completefunc', 'imactivatefunc', 'imstatusfunc', 'omnifunc',
 'operatorfunc', 'quickfixtextfunc', 'tagfunc' and 'thesaurusfunc') are set to
@@ -1449,7 +1474,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 						*'bufhidden'* *'bh'*
 'bufhidden' 'bh'	string (default: "")
-			local to buffer
+			local to buffer  |special-local-buffer-option|
 	This option specifies what happens when a buffer is no longer
 	displayed in a window:
 	  <empty>	follow the global 'hidden' option
@@ -1481,7 +1506,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 						*'buftype'* *'bt'* *E382*
 'buftype' 'bt'		string (default: "")
-			local to buffer
+			local to buffer  |special-local-buffer-option|
 	The value of this option specifies the type of a buffer:
 	  <empty>	normal buffer
 	  nofile	buffer which is not related to a file and will not be
@@ -3408,7 +3433,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 					*'filetype'* *'ft'*
 'filetype' 'ft'		string (default: "")
-			local to buffer
+			local to buffer  |special-local-buffer-option|
 	When this option is set, the FileType autocommand event is triggered.
 	All autocommands that match with the value of this option will be
 	executed.  Thus the value of 'filetype' is used in place of the file
@@ -5565,7 +5590,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 				*'modified'* *'mod'* *'nomodified'* *'nomod'*
 'modified' 'mod'	boolean	(default off)
-			local to buffer
+			local to buffer  |special-local-buffer-option|
 	When on, the buffer is considered to be modified.  This option is set
 	when:
 	1. A change was made to the text since it was last written.  Using the
@@ -6136,7 +6161,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 					*'previewwindow'* *'nopreviewwindow'*
 					*'pvw'* *'nopvw'* *E590*
 'previewwindow' 'pvw'	boolean (default off)
-			local to window
+			local to window  |special-local-window-option|
 			{not available when compiled without the |+quickfix|
 			feature}
 	Identifies the preview window.  Only one window can have this option
@@ -6331,7 +6356,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 				   *'readonly'* *'ro'* *'noreadonly'* *'noro'*
 'readonly' 'ro'		boolean	(default off)
-			local to buffer
+			local to buffer  |special-local-buffer-option|
 	If on, writes fail unless you use a '!'.  Protects you from
 	accidentally overwriting a file.  Default on when Vim is started
 	in read-only mode ("vim -R") or when the executable is called "view".
@@ -6710,7 +6735,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 						*'scroll'* *'scr'*
 'scroll' 'scr'		number	(default: half the window height)
-			local to window
+			local to window  |special-local-window-option|
 	Number of lines to scroll with CTRL-U and CTRL-D commands.  Will be
 	set to half the number of lines in the window when the window size
 	changes.  This may happen when enabling the |status-line| or
@@ -7972,7 +7997,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 						*'syntax'* *'syn'*
 'syntax' 'syn'		string	(default empty)
-			local to buffer
+			local to buffer  |special-local-buffer-option|
 			{not available when compiled without the |+syntax|
 			feature}
 	When this option is set, the syntax with this name is loaded, unless
@@ -9420,7 +9445,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 			*'winfixheight'* *'wfh'* *'nowinfixheight'* *'nowfh'*
 'winfixheight' 'wfh'	boolean	(default off)
-			local to window
+			local to window  |special-local-window-option|
 	Keep the window height when windows are opened or closed and
 	'equalalways' is set.  Also for |CTRL-W_=|.  Set by default for the
 	|preview-window| and |quickfix-window|.
@@ -9428,7 +9453,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 			*'winfixwidth'* *'wfw'* *'nowinfixwidth'* *'nowfw'*
 'winfixwidth' 'wfw'	boolean	(default off)
-			local to window
+			local to window  |special-local-window-option|
 	Keep the window width when windows are opened or closed and
 	'equalalways' is set.  Also for |CTRL-W_=|.
 	The width may be changed anyway when running out of room.

runtime/doc/tags

@@ -3856,7 +3856,8 @@ BeOS	os_beos.txt	/*BeOS*
 Blob	eval.txt	/*Blob*
 Blobs	eval.txt	/*Blobs*
 Boolean	eval.txt	/*Boolean*
-Bram	intro.txt	/*Bram*
+Bram	version9.txt	/*Bram*
+Bram-Moolenaar	version9.txt	/*Bram-Moolenaar*
 BufAdd	autocmd.txt	/*BufAdd*
 BufCreate	autocmd.txt	/*BufCreate*
 BufDelete	autocmd.txt	/*BufDelete*
@@ -5458,7 +5459,7 @@ Mark	motion.txt	/*Mark*
 MenuPopup	autocmd.txt	/*MenuPopup*
 MiNT	os_mint.txt	/*MiNT*
 ModeChanged	autocmd.txt	/*ModeChanged*
-Moolenaar	intro.txt	/*Moolenaar*
+Moolenaar	version9.txt	/*Moolenaar*
 MorphOS	os_amiga.txt	/*MorphOS*
 Motif	gui_x11.txt	/*Motif*
 Myspell	spell.txt	/*Myspell*
@@ -9707,6 +9708,8 @@ spec_chglog_format	pi_spec.txt	/*spec_chglog_format*
 spec_chglog_prepend	pi_spec.txt	/*spec_chglog_prepend*
 spec_chglog_release_info	pi_spec.txt	/*spec_chglog_release_info*
 special-buffers	windows.txt	/*special-buffers*
+special-local-buffer-option	options.txt	/*special-local-buffer-option*
+special-local-window-option	options.txt	/*special-local-window-option*
 specifies	vim9class.txt	/*specifies*
 speed-up	tips.txt	/*speed-up*
 spell	spell.txt	/*spell*

runtime/doc/terminal.txt

@@ -1,4 +1,4 @@
-*terminal.txt*	For Vim version 9.0.  Last change: 2023 Jun 09
+*terminal.txt*	For Vim version 9.0.  Last change: 2023 Jun 28
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -1541,6 +1541,20 @@ If there is no g:termdebug_config you can use: >
 	let g:termdebug_popup = 0
 
 
+Change default signs ~
+							*termdebug_signs*
+Termdebug uses the last two characters of the breakpoint ID in the
+signcolumn to represent breakpoints. For example, breakpoint ID 133
+will be displayed as `33`.
+
+If you want to customize the breakpoint signs: >
+	let g:termdebug_config['sign'] = '>>'
+If there is no g:terminal_config yet you can use: >
+	let g:termdebug_config = {'sign': '>>'}
+
+After this, breakpoints will be displayed as `>>` in the signcolumn.
+
+
 Window toolbar ~
 							*termdebug_winbar*
 By default the Termdebug plugin creates a window toolbar if the mouse is

runtime/doc/tips.txt

@@ -431,14 +431,26 @@ comma-separated list of extension(s) you find yourself wanting to edit: >
 
 	" vim -b : edit binary using xxd-format!
 	augroup Binary
-	  au!
-	  au BufReadPre  *.bin let &bin=1
-	  au BufReadPost *.bin if &bin | %!xxd
-	  au BufReadPost *.bin set ft=xxd | endif
-	  au BufWritePre *.bin if &bin | %!xxd -r
-	  au BufWritePre *.bin endif
-	  au BufWritePost *.bin if &bin | %!xxd
-	  au BufWritePost *.bin set nomod | endif
+	  autocmd!
+	  autocmd BufReadPre  *.bin set binary
+	  autocmd BufReadPost *.bin
+	    \ if &binary
+	    \ |   execute "silent %!xxd -c 32"
+	    \ |   set filetype=xxd
+	    \ |   redraw
+	    \ | endif
+	  autocmd BufWritePre *.bin
+	    \ if &binary
+	    \ |   let s:view = winsaveview()
+	    \ |   execute "silent %!xxd -r -c 32"
+	    \ | endif
+	  autocmd BufWritePost *.bin
+	    \ if &binary
+	    \ |   execute "silent %!xxd -c 32"
+	    \ |   set nomodified
+	    \ |   call winrestview(s:view)
+	    \ |   redraw
+	    \ | endif
 	augroup END
 
 ==============================================================================

runtime/doc/todo.txt

@@ -5535,7 +5535,6 @@ Undo:
 -   Undo history wrong when ":next file" re-uses a buffer. (#5426) ex_next()
     should pass flag to do_argfile(), then to do_ecmd().  Is there a test for
     this?
--   Add buffer argument to undotree(). (#4001)
 -   Undo problem: "g-" doesn't go back, gets stuck. (Björn Linse, 2016 Jul 18)
 -   Undo message is not always properly displayed.  Patch by Ken Takata, 2013
     oct 3.  Doesn't work properly according to Yukihiro Nakadaira.

runtime/doc/uganda.txt

@@ -46,8 +46,8 @@ II) It is allowed to distribute a modified (or extended) version of Vim,
 	  maintainer will do with your changes and under what license they
 	  will be distributed is negotiable.  If there has been no negotiation
 	  then this license, or a later version, also applies to your changes.
-	  The current maintainer is Bram Moolenaar <Bram@vim.org>.  If this
-	  changes it will be announced in appropriate places (most likely
+	  The current maintainers are listed here: https://github.com/orgs/vim/people.
+	  If this changes it will be announced in appropriate places (most likely
 	  vim.sf.net, www.vim.org and/or comp.editors).  When it is completely
 	  impossible to contact the maintainer, the obligation to send him
 	  your changes ceases.  Once the maintainer has confirmed that he has

runtime/doc/undo.txt

@@ -111,9 +111,19 @@ use CTRL-G u.  This is useful if you want an insert command to be undoable in
 parts.  E.g., for each sentence.  |i_CTRL-G_u|
 
 Setting the value of 'undolevels' also closes the undo block.  Even when the
-new value is equal to the old value.  In |Vim9| script: >
-	&undolevels = &undolevels
+new value is equal to the old value.  Use `g:undolevels` to explicitly read
+and write only the global value of 'undolevels'. In |Vim9| script: >
+	&g:undolevels = &g:undolevels
 In legacy script: >
+	let &g:undolevels = &g:undolevels
+
+Note that the similar-looking assignment `let &undolevels=&undolevels` does not
+preserve the global option value of 'undolevels' in the event that the local
+option has been set to a different value.  For example: >
+	" Start with different global and local values for 'undolevels'.
+	let &g:undolevels = 1000
+	let &l:undolevels = 2000
+	" This assignment changes the global option to 2000:
 	let &undolevels = &undolevels
 
 ==============================================================================
@@ -366,12 +376,20 @@ undo is possible.  Use this if you are running out of memory.
 When you set 'undolevels' to -1 the undo information is not immediately
 cleared, this happens at the next change.  To force clearing the undo
 information you can use these commands: >
-	:let old_undolevels = &undolevels
-	:set undolevels=-1
+	:let old_undolevels = &l:undolevels
+	:setlocal undolevels=-1
 	:exe "normal a \<BS>\<Esc>"
-	:let &undolevels = old_undolevels
+	:let &l:undolevels = old_undolevels
 	:unlet old_undolevels
 
+Note use of `&l:undolevels` to explicitly read the local value of 'undolevels'
+and the use of `:setlocal` to change only the local option (which takes
+precedence over the corresponding global option value).  Saving the option value
+via the use of `&undolevels` is unpredictable; it reads either the local value
+(if one has been set) or the global value (otherwise).  Also, if a local value
+has been set, changing the option via `:set undolevels` will change both the
+global and local values, requiring extra work to save and restore both values.
+
 Marks for the buffer ('a to 'z) are also saved and restored, together with the
 text.
 

runtime/doc/usr_05.txt

@@ -308,17 +308,27 @@ This switches on three very clever mechanisms:
 
 
 				*restore-cursor* *last-position-jump*  >
-    autocmd BufReadPost *
-      \ if line("'\"") >= 1 && line("'\"") <= line("$") && &ft !~# 'commit'
-      \ |   exe "normal! g`\""
-      \ | endif
+    augroup RestoreCursor
+      autocmd!
+      autocmd BufReadPost *
+        \ let line = line("'\"")
+        \ | if line >= 1 && line <= line("$") && &filetype !~# 'commit'
+        \      && index(['xxd', 'gitrebase'], &filetype) == -1
+        \ |   execute "normal! g`\""
+        \ | endif
+    augroup END
 
 Another autocommand.  This time it is used after reading any file.  The
 complicated stuff after it checks if the '" mark is defined, and jumps to it
-if so.  The backslash at the start of a line is used to continue the command
-from the previous line.  That avoids a line getting very long.
-See |line-continuation|.  This only works in a Vim script file, not when
-typing commands at the command-line.
+if so.  It doesn't do that for a commit or rebase message, which are likely
+a different one than last time, and when using xxd(1) to filter and edit
+binary files, which transforms input files back and forth, causing them to
+have dual nature, so to speak.  See also |using-xxd|.
+
+The backslash at the start of a line is used to continue the command from the
+previous line.  That avoids a line getting very long.  See |line-continuation|.
+This only works in a Vim script file, not when typing commands at the
+command line.
 
 >
 	command DiffOrig vert new | set bt=nofile | r ++edit # | 0d_ | diffthis

runtime/doc/usr_41.txt

@@ -1232,6 +1232,7 @@ Inter-process communication:		    *channel-functions*
 	json_decode()		decode a JSON string to Vim types
 	js_encode()		encode an expression to a JSON string
 	js_decode()		decode a JSON string to Vim types
+	err_teapot()		give error 418 or 503
 
 Jobs:						*job-functions*
 	job_start()		start a job
@@ -1372,7 +1373,7 @@ Various:					*various-functions*
 	libcallnr()		idem, returning a number
 
 	undofile()		get the name of the undo file
-	undotree()		return the state of the undo tree
+	undotree()		return the state of the undo tree for a buffer
 
 	shiftwidth()		effective value of 'shiftwidth'
 

runtime/doc/version7.txt

@@ -4627,7 +4627,7 @@ using an #ifdef. (Sergey Khorev)
 Mzscheme interface didn't link, missing function.  Changed order of libraries
 in the configure script.
 
-Ruby interface didn't compile on Mac.  Changed #ifdef. (Kevin Ballard)
+Ruby interface didn't compile on Mac.  Changed #ifdef. (Lily Ballard)
 
 Patch 7.1b.001 (extra)
 Problem:    Random text in a source file.  No idea how it got there.

runtime/doc/version9.txt

@@ -1,4 +1,4 @@
-*version9.txt*  For Vim version 9.0.  Last change: 2022 Nov 23
+*version9.txt*  For Vim version 9.0.  Last change: 2023 Aug 09
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -43,6 +43,17 @@ when the release was being prepared.  Sven was a long time supporter of Vim.
 He registered the vim.org domain and created the first Vim website.  We will
 remember him!
 
+						 *Bram* *Moolenaar* *Bram-Moolenaar*
+Vim version 9.1 is dedicated to Bram Moolenaar, who passed away on August 3rd 2023
+while still working full-time on Vim.  The Vim project would not exist without
+his ongoing passion to lead and develop Vim and the community for more than 30
+years.  Bram was also passionate about his |ICCF| foundation to help children
+in Uganda.  If you enjoy using Vim, please consider donating!
+We will miss his guidance, passion and leadership.
+
+Obituary Articles: https://github.com/vim/vim/discussions/12742
+Say Farewell: https://github.com/vim/vim/discussions/12737
+
 ==============================================================================
 NEW FEATURES						*new-9*
 

runtime/doc/xxd.1

@@ -6,7 +6,7 @@
 .\"    Changes by Bram Moolenaar <Bram@vim.org>
 .SH NAME
 .I xxd
-\- make a hexdump or do the reverse.
+\- make a hex dump or do the reverse.
 .SH SYNOPSIS
 .B xxd
 \-h[elp]
@@ -57,20 +57,20 @@ are all equivalent.
 .PP
 .TP
 .IR \-a " | " \-autoskip
-Toggle autoskip: A single '*' replaces nul-lines.  Default off.
+Toggle autoskip: A single '*' replaces NUL-lines.  Default off.
 .TP
 .IR \-b " | " \-bits
-Switch to bits (binary digits) dump, rather than hexdump.
+Switch to bits (binary digits) dump, rather than hex dump.
 This option writes octets as eight digits "1"s and "0"s instead of a normal
 hexadecimal dump. Each line is preceded by a line number in hexadecimal and
-followed by an ascii (or ebcdic) representation. The command line switches
+followed by an ASCII (or EBCDIC) representation. The command line switches
 \-r, \-p, \-i do not work with this mode.
 .TP
 .IR "\-c cols " | " \-cols cols"
 Format
 .RI < cols >
 octets per line. Default 16 (\-i: 12, \-ps: 30, \-b: 6). Max 256.
-No maxmimum for \-ps. With \-ps, 0 results in one long line of output.
+No maximum for \-ps. With \-ps, 0 results in one long line of output.
 .TP
 .IR \-C " | " \-capitalize
 Capitalize variable names in C include file style, when using \-i.
@@ -81,11 +81,11 @@ This does not change the hexadecimal representation. The option is
 meaningless in combinations with \-r, \-p or \-i.
 .TP
 .IR \-e
-Switch to little-endian hexdump.
+Switch to little-endian hex dump.
 This option treats byte groups as words in little-endian byte order.
 The default grouping of 4 bytes may be changed using
 .RI "" \-g .
-This option only applies to hexdump, leaving the ASCII (or EBCDIC)
+This option only applies to the hex dump, leaving the ASCII (or EBCDIC)
 representation unchanged.
 The command line switches
 \-r, \-p, \-i do not work with this mode.
@@ -93,13 +93,13 @@ The command line switches
 .IR "\-g bytes " | " \-groupsize bytes"
 Separate the output of every
 .RI < bytes >
-bytes (two hex characters or eight bit-digits each) by a whitespace.
+bytes (two hex characters or eight bit digits each) by a whitespace.
 Specify
 .I \-g 0
 to suppress grouping.
 .RI < Bytes "> defaults to " 2
 in normal mode, \fI4\fP in little-endian mode and \fI1\fP in bits mode.
-Grouping does not apply to postscript or include style.
+Grouping does not apply to PostScript or include style.
 .TP
 .IR \-h " | " \-help
 Print a summary of available commands and exit.  No hex dumping is performed.
@@ -123,16 +123,16 @@ Add
 to the displayed file position.
 .TP
 .IR \-p " | " \-ps " | " \-postscript " | " \-plain
-Output in postscript continuous hexdump style. Also known as plain hexdump
+Output in PostScript continuous hex dump style. Also known as plain hex dump
 style.
 .TP
 .IR \-r " | " \-revert
-Reverse operation: convert (or patch) hexdump into binary.
+Reverse operation: convert (or patch) hex dump into binary.
 If not writing to stdout, xxd writes into its output file without truncating
 it. Use the combination
 .I \-r \-p
 to read plain hexadecimal dumps without line number information and without a
-particular column layout. Additional Whitespace and line-breaks are allowed
+particular column layout. Additional whitespace and line breaks are allowed
 anywhere.
 .TP
 .I \-seek offset
@@ -140,7 +140,7 @@ When used after
 .IR \-r :
 revert with
 .RI < offset >
-added to file positions found in hexdump.
+added to file positions found in hex dump.
 .TP
 .I \-s [+][\-]seek
 Start at
@@ -153,28 +153,28 @@ should be that many characters from the end of the input (or if combined with
 Without \-s option, xxd starts at the current file position.
 .TP
 .I \-u
-Use upper case hex letters. Default is lower case.
+Use upper-case hex letters. Default is lower-case.
 .TP
 .IR \-v " | " \-version
 Show version string.
 .SH CAVEATS
 .PP
 .I xxd \-r
-has some builtin magic while evaluating line number information.
-If the output file is seekable, then the linenumbers at the start of each
-hexdump line may be out of order, lines may be missing, or overlapping. In
+has some built-in magic while evaluating line number information.
+If the output file is seekable, then the line numbers at the start of each
+hex dump line may be out of order, lines may be missing, or overlapping. In
 these cases xxd will lseek(2) to the next position. If the output file is not
 seekable, only gaps are allowed, which will be filled by null-bytes.
 .PP
 .I xxd \-r
 never generates parse errors. Garbage is silently skipped.
 .PP
-When editing hexdumps, please note that
+When editing hex dumps, please note that
 .I xxd \-r
 skips everything on the input line after reading enough columns of hexadecimal
-data (see option \-c). This also means, that changes to the printable ascii (or
-ebcdic) columns are always ignored. Reverting a plain (or postscript) style
-hexdump with xxd \-r \-p does not depend on the correct number of columns. Here anything that looks like a pair of hex-digits is interpreted.
+data (see option \-c). This also means that changes to the printable ASCII (or
+EBCDIC) columns are always ignored. Reverting a plain (or PostScript) style
+hex dump with xxd \-r \-p does not depend on the correct number of columns. Here, anything that looks like a pair of hex digits is interpreted.
 .PP
 Note the difference between
 .br
@@ -190,20 +190,20 @@ may be different from
 as lseek(2) is used to "rewind" input.  A '+'
 makes a difference if the input source is stdin, and if stdin's file position
 is not at the start of the file by the time xxd is started and given its input.
-The following examples may help to clarify (or further confuse!)...
+The following examples may help to clarify (or further confuse!):
 .PP
 Rewind stdin before reading; needed because the `cat' has already read to the
 end of stdin.
 .br
 \fI% sh \-c "cat > plain_copy; xxd \-s 0 > hex_copy" < file\fR
 .PP
-Hexdump from file position 0x480 (=1024+128) onwards.
+Hex dump from file position 0x480 (=1024+128) onwards.
 The `+' sign means "relative to the current position", thus the `128' adds to
 the 1k where dd left off.
 .br
 \fI% sh \-c "dd of=plain_snippet bs=1k count=1; xxd \-s +128 > hex_snippet" < file\fR
 .PP
-Hexdump from file position 0x100 ( = 1024\-768) on.
+Hex dump from file position 0x100 (=1024\-768) onwards.
 .br
 \fI% sh \-c "dd of=plain_snippet bs=1k count=1; xxd \-s +\-768 > hex_snippet" < file\fR
 .PP
@@ -224,7 +224,7 @@ Print 3 lines (hex 0x30 bytes) from the end of
 \fI% xxd \-s \-0x30 file\fR
 .PP
 .br
-Print 120 bytes as continuous hexdump with 20 octets per line.
+Print 120 bytes as a continuous hex dump with 20 octets per line.
 .br
 \fI% xxd \-l 120 \-ps \-c 20 xxd.1\fR
 .br
@@ -242,7 +242,7 @@ Print 120 bytes as continuous hexdump with 20 octets per line.
 .br
 
 .br
-Hexdump the first 120 bytes of this man page with 12 octets per line.
+Hex dump the first 120 bytes of this man page with 12 octets per line.
 .br
 \fI% xxd \-l 120 \-c 12 xxd.1\fR
 .br
@@ -299,7 +299,7 @@ except for the last one which is 'A' (hex 0x41).
 \fI% echo "010000: 41" | xxd \-r > file\fR
 .PP
 .br
-Hexdump this file with autoskip.
+Hex dump this file with autoskip.
 .br
 \fI% xxd \-a \-c 12 file\fR
 .br
@@ -310,26 +310,26 @@ Hexdump this file with autoskip.
 000fffc: 0000 0000 40                   ....A
 .PP
 Create a 1 byte file containing a single 'A' character.
-The number after '\-r \-s' adds to the linenumbers found in the file;
+The number after '\-r \-s' adds to the line numbers found in the file;
 in effect, the leading bytes are suppressed.
 .br
 \fI% echo "010000: 41" | xxd \-r \-s \-0x10000 > file\fR
 .PP
 Use xxd as a filter within an editor such as
 .B vim(1)
-to hexdump a region marked between `a' and `z'.
+to hex dump a region marked between `a' and `z'.
 .br
 \fI:'a,'z!xxd\fR
 .PP
 Use xxd as a filter within an editor such as
 .B vim(1)
-to recover a binary hexdump marked between `a' and `z'.
+to recover a binary hex dump marked between `a' and `z'.
 .br
 \fI:'a,'z!xxd \-r\fR
 .PP
 Use xxd as a filter within an editor such as
 .B vim(1)
-to recover one line of a hexdump.  Move the cursor over the line and type:
+to recover one line of a hex dump.  Move the cursor over the line and type:
 .br
 \fI!!xxd \-r\fR
 .PP
@@ -348,8 +348,9 @@ The following error values are returned:
 no errors encountered.
 .TP
 \-1
-operation not supported (
-.I xxd \-r \-i
+operation not supported
+\%(\c
+.I \%xxd \-r \-i
 still impossible).
 .TP
 1
@@ -367,7 +368,7 @@ desired seek position is unreachable.
 uuencode(1), uudecode(1), patch(1)
 .br
 .SH WARNINGS
-The tools weirdness matches its creators brain.
+The tool's weirdness matches its creator's brain.
 Use entirely at your own risk. Copy files. Trace it. Become a wizard.
 .br
 .SH VERSION

runtime/evim.vim

@@ -1,6 +1,7 @@
 " Vim script for Evim key bindings
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2022 May 10
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Don't use Vi-compatible mode.
 set nocompatible

runtime/filetype.vim

@@ -1,7 +1,8 @@
 " Vim support file to detect file types
 "
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2023 Jun 09
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Listen very carefully, I will say this only once
 if exists("did_load_filetypes")
@@ -254,6 +255,9 @@ au BufNewFile,BufRead named*.conf,rndc*.conf,rndc*.key	setf named
 au BufNewFile,BufRead named.root		setf bindzone
 au BufNewFile,BufRead *.db			call dist#ft#BindzoneCheck('')
 
+" Blade
+au BufNewFile,BufRead *.blade.php		setf blade
+
 " Blank
 au BufNewFile,BufRead *.bl			setf blank
 
@@ -891,6 +895,7 @@ if exists('$XDG_CONFIG_HOME')
 endif
 au BufNewFile,BufRead $HOME/.config/cabal/config setf cabalconfig
 au BufNewFile,BufRead cabal.config		setf cabalconfig
+au BufNewFile,BufRead *.persistentmodels	setf haskellpersistent
 
 " Haste
 au BufNewFile,BufRead *.ht			setf haste
@@ -945,6 +950,9 @@ au BufNewFile,BufRead */etc/host.conf		setf hostconf
 " Hosts access
 au BufNewFile,BufRead */etc/hosts.allow,*/etc/hosts.deny  setf hostsaccess
 
+" Hurl
+au BufRead,BufNewFile *.hurl			setf hurl
+
 " Hyper Builder
 au BufNewFile,BufRead *.hb			setf hb
 
@@ -1057,6 +1065,9 @@ au BufNewFile,BufRead *.json5			setf json5
 " JSON Patch (RFC 6902)
 au BufNewFile,BufRead *.json-patch		setf json
 
+" Geojson is also json
+au BufNewFile,BufRead *.geojson			setf json
+
 " Jupyter Notebook is also json
 au BufNewFile,BufRead *.ipynb			setf json
 
@@ -1511,6 +1522,9 @@ au BufNewFile,BufRead *.pdf				setf pdf
 " PCMK - HAE - crm configure edit
 au BufNewFile,BufRead *.pcmk				setf pcmk
 
+" PEM (Privacy-Enhanced Mail)
+au BufNewFile,BufRead *.pem,*.cer,*.crt,*.csr		setf pem
+
 " Perl
 if has("fname_case")
   au BufNewFile,BufRead *.pl,*.PL			call dist#ft#FTpl()
@@ -1555,6 +1569,10 @@ au BufNewFile,BufRead *.rcp			setf pilrc
 " Pine config
 au BufNewFile,BufRead .pinerc,pinerc,.pinercex,pinercex		setf pine
 
+" Pip requirements
+au BufNewFile,BufRead *.pip			setf requirements
+au BufNewFile,BufRead requirements.txt		setf requirements
+
 " Pipenv Pipfiles
 au BufNewFile,BufRead Pipfile			setf toml
 au BufNewFile,BufRead Pipfile.lock		setf json
@@ -1673,6 +1691,9 @@ au BufNewFile,BufRead *.pk			setf poke
 " Protocols
 au BufNewFile,BufRead */etc/protocols		setf protocols
 
+" PyPA manifest files
+au BufNewFile,BufRead MANIFEST.in		setf pymanifest
+
 " Pyret
 au BufNewFile,BufRead *.arr			setf pyret
 
@@ -2311,6 +2332,9 @@ au BufNewFile,BufRead */.config/upstart/*.override	       setf upstart
 " URL shortcut
 au BufNewFile,BufRead *.url			setf urlshortcut
 
+" V
+au BufNewFile,BufRead *.vsh,*.vv			setf v
+
 " Vala
 au BufNewFile,BufRead *.vala			setf vala
 
@@ -2393,6 +2417,9 @@ au BufNewFile,BufRead .wgetrc,wgetrc		setf wget
 " Wget2 config
 au BufNewFile,BufRead .wget2rc,wget2rc		setf wget2
 
+" WebGPU Shading Language (WGSL)
+au BufNewFile,BufRead *.wgsl			setf wgsl
+
 " Website MetaLanguage
 au BufNewFile,BufRead *.wml			setf wml
 
@@ -2481,6 +2508,9 @@ au BufNewFile,BufRead *.fsproj,*.fsproj.user	setf xml
 " VBPROJ files are Visual Studio.NET's XML-based Visual Basic project config files
 au BufNewFile,BufRead *.vbproj,*.vbproj.user	setf xml
 
+" Unison Language
+au BufNewFile,BufRead *.u,*.uu				setf unison
+
 " Qt Linguist translation source and Qt User Interface Files are XML
 " However, for .ts TypeScript is more common.
 au BufNewFile,BufRead *.ui			setf xml
@@ -2526,7 +2556,7 @@ au BufNewFile,BufRead *.yy,*.yxx,*.y++		setf yacc
 au BufNewFile,BufRead *.y			call dist#ft#FTy()
 
 " Yaml
-au BufNewFile,BufRead *.yaml,*.yml		setf yaml
+au BufNewFile,BufRead *.yaml,*.yml,*.eyaml		setf yaml
 
 " Raml
 au BufNewFile,BufRead *.raml			setf raml

runtime/ftoff.vim

@@ -1,7 +1,8 @@
 " Vim support file to switch off detection of file types
 "
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last change:	2001 Jun 11
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 if exists("did_load_filetypes")
   unlet did_load_filetypes

runtime/ftplugin.vim

@@ -2,8 +2,9 @@ vim9script noclear
 
 # Vim support file to switch on loading plugins for file types
 #
-# Maintainer:	Bram Moolenaar <Bram@vim.org>
-# Last change:	2022 Feb 11
+# Maintainer:	The Vim Project <https://github.com/vim/vim>
+# Last change:	2023 Aug 10
+# Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 if exists("g:did_load_ftplugin")
   finish

runtime/ftplugin/aap.vim

@@ -1,7 +1,8 @@
 " Vim filetype plugin file
 " Language:	Aap recipe
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2021 Nov 14
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")

runtime/ftplugin/btm.vim

@@ -1,7 +1,8 @@
 " Vim filetype plugin file
 " Language:	BTM
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2004 Jul 06
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")

runtime/ftplugin/c.vim

@@ -1,7 +1,8 @@
 " Vim filetype plugin file
 " Language:	C
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2022 Apr 08
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")

runtime/ftplugin/cpp.vim

@@ -1,7 +1,8 @@
 " Vim filetype plugin file
 " Language:	C++
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2020 Jul 26
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")

runtime/ftplugin/diff.vim

@@ -1,7 +1,8 @@
 " Vim filetype plugin file
 " Language:	Diff
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2021 Nov 14
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")

runtime/ftplugin/heex.vim

@@ -14,3 +14,14 @@ setlocal comments=:<%!--
 setlocal commentstring=<%!--\ %s\ --%>
 
 let b:undo_ftplugin = 'set sw< sts< et< com< cms<'
+
+" HTML: thanks to Johannes Zellner and Benji Fisher.
+if exists("loaded_matchit") && !exists("b:match_words")
+  let b:match_ignorecase = 1
+  let b:match_words = '<!--:-->,' ..
+	\	      '<:>,' ..
+	\	      '<\@<=[ou]l\>[^>]*\%(>\|$\):<\@<=li\>:<\@<=/[ou]l>,' ..
+	\	      '<\@<=dl\>[^>]*\%(>\|$\):<\@<=d[td]\>:<\@<=/dl>,' ..
+	\	      '<\@<=\([^/!][^ \t>]*\)[^>]*\%(>\|$\):<\@<=/\1>'
+  let b:undo_ftplugin ..= " | unlet! b:match_ignorecase b:match_words"
+endif

runtime/ftplugin/mail.vim

@@ -1,7 +1,8 @@
 " Vim filetype plugin file
 " Language:	Mail
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2021 Oct 23
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")

runtime/ftplugin/make.vim

@@ -1,7 +1,8 @@
 " Vim filetype plugin file
 " Language:	Make
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2020 Oct 16
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")

runtime/ftplugin/nix.vim

@@ -0,0 +1,17 @@
+" Vim filetype plugin
+" Language:    nix
+" Maintainer:  Keith Smiley <keithbsmiley@gmail.com>
+" Last Change: 2023 Jul 22
+
+" Only do this when not done yet for this buffer
+if exists("b:did_ftplugin")
+  finish
+endif
+
+" Don't load another plugin for this buffer
+let b:did_ftplugin = 1
+
+let b:undo_ftplugin = "setl commentstring< comments<"
+
+setlocal comments=:#
+setlocal commentstring=#\ %s

runtime/ftplugin/objc.vim

@@ -1,7 +1,8 @@
 " Vim filetype plugin file
 " Language:	Objective C
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2003 Jan 15
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")

runtime/ftplugin/pymanifest.vim

@@ -0,0 +1,13 @@
+" Vim filetype plugin
+" Language:	PyPA manifest
+" Maintainer:	ObserverOfTime <chronobserver@disroot.org>
+" Last Change:	2023 Aug 08
+
+if exists('b:did_ftplugin')
+  finish
+endif
+let b:did_ftplugin = 1
+
+setl comments=:# commentstring=#\ %s
+
+let b:undo_ftplugin = 'setl com< cms<'

runtime/ftplugin/rust.vim

@@ -1,7 +1,7 @@
 " Language:     Rust
 " Description:  Vim ftplugin for Rust
 " Maintainer:   Chris Morgan <me@chrismorgan.info>
-" Maintainer:   Kevin Ballard <kevin@sb.org>
+" Maintainer:   Lily Ballard <lily@ballards.net>
 " Last Change:  June 08, 2016
 " For bugs, patches and license go to https://github.com/rust-lang/rust.vim 
 

runtime/ftplugin/sed.vim

@@ -0,0 +1,29 @@
+" Vim filetype plugin file
+" Language:	sed
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2020 Apr 1
+
+if exists("b:did_ftplugin")
+    finish
+endif
+let b:did_ftplugin = 1
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+setlocal comments=:#
+setlocal commentstring=#\ %s
+setlocal formatoptions-=t formatoptions+=croql
+
+let b:undo_ftplugin = "setl com< cms< fo<"
+
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let b:browsefilter = "sed Script Files (*.sed)\t*.sed\n" ..
+	\	       "All Files (*.*)\t*.*\n"
+  let b:undo_ftplugin ..= " | unlet! b:browsefilter"
+endif
+
+let &cpo = s:cpo_save
+unlet s:cpo_save
+
+" vim: nowrap sw=2 sts=2 ts=8

runtime/ftplugin/toml.vim

@@ -2,7 +2,7 @@
 " Language:    TOML
 " Homepage:    https://github.com/cespare/vim-toml
 " Maintainer:  Aman Verma
-" Author:      Kevin Ballard <kevin@sb.org>
+" Author:      Lily Ballard <lily@ballards.net>
 " Last Change: Sep 21, 2021
 
 if exists('b:did_ftplugin')

runtime/ftplugin/unison.vim

@@ -0,0 +1,14 @@
+" Vim filetype plugin file
+" Language:             unison
+" Maintainer:           Anton Parkhomenko <anton@chuwy.me>
+" Latest Revision:      2023-08-07
+
+if exists("b:did_ftplugin")
+  finish
+endif
+let b:did_ftplugin = 1
+
+let b:undo_ftplugin = "setl cms< isk<"
+
+setlocal commentstring=--\ %s
+setlocal iskeyword+=!,'

runtime/ftplugin/vim.vim

@@ -1,7 +1,8 @@
 " Vim filetype plugin
 " Language:	Vim
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2023 Feb 07
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")

runtime/ftplugin/zimbu.vim

@@ -1,7 +1,8 @@
 " Vim filetype plugin file
 " Language:	Zimbu
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2022 Sep 07
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")

runtime/ftplugof.vim

@@ -2,8 +2,9 @@ vim9script
 
 # Vim support file to switch off loading plugins for file types
 #
-# Maintainer:	Bram Moolenaar <Bram@vim.org>
-# Last Change:	2022 Feb 09
+# Maintainer:	The Vim Project <https://github.com/vim/vim>
+# Last Change:	2023 Aug 10
+# Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 if exists("g:did_load_ftplugin")
   unlet g:did_load_ftplugin

runtime/gvimrc_example.vim

@@ -2,8 +2,9 @@
 " The commands in this are executed when the GUI is started, after the vimrc
 " has been executed.
 "
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last change:	2016 Apr 05
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 "
 " To use it, copy it to
 "         for Unix:  ~/.gvimrc

runtime/indent.vim

@@ -1,7 +1,8 @@
 " Vim support file to switch on loading indent files for file types
 "
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2022 Feb 11
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 if exists("did_indent_on")
   finish

runtime/indent/README.txt

@@ -6,15 +6,16 @@ at ":help indent-expression".  Looking at the existing files should give you
 inspiration.
 
 If you make a new indent file which would be useful for others, please send it
-to Bram@vim.org.  Include instructions for detecting the file type for this
-language, by file name extension or by checking a few lines in the file.
-And please stick to the rules below.
+to the vim-dev mailing list <vim-dev@vim.org>.  Include instructions for
+detecting the file type for this language, by file name extension or by
+checking a few lines in the file. And please stick to the rules below.
 
 If you have remarks about an existing file, send them to the maintainer of
-that file.  Only when you get no response send a message to Bram@vim.org.
+that file.  Only when you get no response send a message to the vim-dev
+mailing list: <vim-dev@vim.org>.
 
 If you are the maintainer of an indent file and make improvements, e-mail the
-new version to Bram@vim.org.
+new version to the vim-dev mailing list: <vim-dev@vim.org>.
 
 
 Rules for making an indent file:

runtime/indent/aap.vim

@@ -1,7 +1,8 @@
 " Vim indent file
 " Language:	Aap recipe
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2005 Jun 24
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")

runtime/indent/c.vim

@@ -1,7 +1,8 @@
 " Vim indent file
 " Language:	C
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2005 Mar 27
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")

runtime/indent/cpp.vim

@@ -1,7 +1,8 @@
 " Vim indent file
 " Language:	C++
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2008 Nov 29
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")

runtime/indent/cuda.vim

@@ -1,7 +1,8 @@
 " Vim indent file
 " Language:	CUDA
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2008 Nov 29
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")

runtime/indent/python.vim

@@ -1,8 +1,9 @@
 " Vim indent file
-" Language:		Python
-" Maintainer:		Bram Moolenaar <Bram@vim.org>
+" Language:	Python
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 " Original Author:	David Bustos <bustos@caltech.edu>
-" Last Change:		2021 Sep 26
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")

runtime/indent/rapid.vim

@@ -0,0 +1,255 @@
+" ABB Rapid Command indent file for Vim
+" Language: ABB Rapid Command
+" Maintainer: Patrick Meiser-Knosowski <knosowski@graeffrobotics.de>
+" Version: 2.2.7
+" Last Change: 12. May 2023
+" Credits: Based on indent/vim.vim
+"
+" Suggestions of improvement are very welcome. Please email me!
+"
+" Known bugs: ../doc/rapid.txt
+"
+" TODO
+" * indent wrapped lines which do not end with an ; or special key word,
+"     maybe this is a better idea, but then () and [] has to be changed as
+"     well
+"
+
+if exists("g:rapidNoSpaceIndent")
+  if !exists("g:rapidSpaceIndent")
+    let g:rapidSpaceIndent = !g:rapidNoSpaceIndent
+  endif
+  unlet g:rapidNoSpaceIndent
+endif
+
+" Only load this indent file when no other was loaded.
+if exists("b:did_indent") || get(g:,'rapidNoIndent',0)
+  finish
+endif
+let b:did_indent = 1
+
+setlocal nolisp
+setlocal nosmartindent
+setlocal autoindent
+setlocal indentexpr=GetRapidIndent()
+if get(g:,'rapidNewStyleIndent',0)
+  setlocal indentkeys=!^F,o,O,0=~endmodule,0=~error,0=~undo,0=~backward,0=~endproc,0=~endrecord,0=~endtrap,0=~endfunc,0=~else,0=~endif,0=~endtest,0=~endfor,0=~endwhile,:,<[>,<]>,<(>,<)>
+else
+  setlocal indentkeys=!^F,o,O,0=~endmodule,0=~error,0=~undo,0=~backward,0=~endproc,0=~endrecord,0=~endtrap,0=~endfunc,0=~else,0=~endif,0=~endtest,0=~endfor,0=~endwhile,:
+endif
+let b:undo_indent="setlocal lisp< si< ai< inde< indk<"
+
+if get(g:,'rapidSpaceIndent',1)
+  " Use spaces for indention, 2 is enough. 
+  " More or even tabs wastes space on the teach pendant.
+  setlocal softtabstop=2
+  setlocal shiftwidth=2
+  setlocal expandtab
+  setlocal shiftround
+  let b:undo_indent = b:undo_indent." sts< sw< et< sr<"
+endif
+
+" Only define the function once.
+if exists("*GetRapidIndent")
+  finish
+endif
+
+let s:keepcpo= &cpo
+set cpo&vim
+
+function GetRapidIndent()
+  let ignorecase_save = &ignorecase
+  try
+    let &ignorecase = 0
+    return s:GetRapidIndentIntern()
+  finally
+    let &ignorecase = ignorecase_save
+  endtry
+endfunction
+
+function s:GetRapidIndentIntern() abort
+
+  let l:currentLineNum = v:lnum
+  let l:currentLine = getline(l:currentLineNum)
+
+  if  l:currentLine =~ '^!' && !get(g:,'rapidCommentIndent',0)
+    " If current line is ! line comment, do not change indent
+    " This may be usefull if code is commented out at the first column.
+    return 0
+  endif
+
+  " Find a non-blank line above the current line.
+  let l:preNoneBlankLineNum = s:RapidPreNoneBlank(v:lnum - 1)
+  if  l:preNoneBlankLineNum == 0
+    " At the start of the file use zero indent.
+    return 0
+  endif
+
+  let l:preNoneBlankLine = getline(l:preNoneBlankLineNum)
+  let l:ind = indent(l:preNoneBlankLineNum)
+
+  " Define add a 'shiftwidth' pattern
+  let l:addShiftwidthPattern  = '\c\v^\s*('
+  let l:addShiftwidthPattern .=           '((local|task)\s+)?(module|record|proc|func|trap)\s+\k'
+  let l:addShiftwidthPattern .=           '|(backward|error|undo)>'
+  let l:addShiftwidthPattern .=         ')'
+  "
+  " Define Subtract 'shiftwidth' pattern
+  let l:subtractShiftwidthPattern  = '\c\v^\s*('
+  let l:subtractShiftwidthPattern .=           'end(module|record|proc|func|trap)>'
+  let l:subtractShiftwidthPattern .=           '|(backward|error|undo)>'
+  let l:subtractShiftwidthPattern .=         ')'
+
+  " Add shiftwidth
+  if l:preNoneBlankLine =~ l:addShiftwidthPattern
+        \|| s:RapidLenTilStr(l:preNoneBlankLineNum, "then",     0)>=0
+        \|| s:RapidLenTilStr(l:preNoneBlankLineNum, "else",     0)>=0
+        \|| s:RapidLenTilStr(l:preNoneBlankLineNum, "do",       0)>=0
+        \|| s:RapidLenTilStr(l:preNoneBlankLineNum, "case",     0)>=0
+        \|| s:RapidLenTilStr(l:preNoneBlankLineNum, "default",  0)>=0
+    let l:ind += &sw
+  endif
+
+  " Subtract shiftwidth
+  if l:currentLine =~ l:subtractShiftwidthPattern
+        \|| s:RapidLenTilStr(l:currentLineNum, "endif",     0)>=0
+        \|| s:RapidLenTilStr(l:currentLineNum, "endfor",    0)>=0
+        \|| s:RapidLenTilStr(l:currentLineNum, "endwhile",  0)>=0
+        \|| s:RapidLenTilStr(l:currentLineNum, "endtest",   0)>=0
+        \|| s:RapidLenTilStr(l:currentLineNum, "else",      0)>=0
+        \|| s:RapidLenTilStr(l:currentLineNum, "elseif",    0)>=0
+        \|| s:RapidLenTilStr(l:currentLineNum, "case",      0)>=0
+        \|| s:RapidLenTilStr(l:currentLineNum, "default",   0)>=0
+    let l:ind = l:ind - &sw
+  endif
+
+  " First case (or default) after a test gets the indent of the test.
+  if (s:RapidLenTilStr(l:currentLineNum, "case", 0)>=0 || s:RapidLenTilStr(l:currentLineNum, "default", 0)>=0) && s:RapidLenTilStr(l:preNoneBlankLineNum, "test", 0)>=0
+    let l:ind += &sw
+  endif
+
+  " continued lines with () or []
+  let l:OpenSum  = s:RapidLoneParen(l:preNoneBlankLineNum,"(") + s:RapidLoneParen(l:preNoneBlankLineNum,"[")
+  if get(g:,'rapidNewStyleIndent',0)
+    let l:CloseSum = s:RapidLoneParen(l:preNoneBlankLineNum,")") + s:RapidLoneParen(l:currentLineNum,"]")
+  else
+    let l:CloseSum = s:RapidLoneParen(l:preNoneBlankLineNum,")") + s:RapidLoneParen(l:preNoneBlankLineNum,"]")
+  endif
+  if l:OpenSum > l:CloseSum
+    let l:ind += (l:OpenSum * 4 * &sw)
+  elseif l:OpenSum < l:CloseSum
+    let l:ind -= (l:CloseSum * 4 * &sw)
+  endif
+
+  return l:ind
+endfunction
+
+" Returns the length of the line until a:str occur outside a string or
+" comment. Search starts at string index a:startIdx.
+" If a:str is a word also add word bounderies and case insesitivity.
+" Note: rapidTodoComment and rapidDebugComment are not taken into account.
+function s:RapidLenTilStr(lnum, str, startIdx) abort
+
+  let l:line = getline(a:lnum)
+  let l:len  = strlen(l:line)
+  let l:idx  = a:startIdx
+  let l:str  = a:str
+  if l:str =~ '^\k\+$'
+    let l:str = '\c\<' . l:str . '\>'
+  endif
+
+  while l:len > l:idx
+    let l:idx = match(l:line, l:str, l:idx)
+    if l:idx < 0
+      " a:str not found
+      return -1
+    endif
+    let l:synName = synIDattr(synID(a:lnum,l:idx+1,0),"name")
+    if         l:synName != "rapidString"
+          \&&  l:synName != "rapidConcealableString"
+          \&& (l:synName != "rapidComment" || l:str =~ '^!')
+      " a:str found outside string or line comment
+      return l:idx
+    endif
+    " a:str is part of string or line comment
+    let l:idx += 1 " continue search for a:str
+  endwhile
+  
+  " a:str not found or l:len <= a:startIdx
+  return -1
+endfunction
+
+" a:lchar shoud be one of (, ), [, ], { or }
+" returns the number of opening/closing parenthesise which have no
+" closing/opening match in getline(a:lnum)
+function s:RapidLoneParen(lnum,lchar) abort
+  if a:lchar == "(" || a:lchar == ")"
+    let l:opnParChar = "("
+    let l:clsParChar = ")"
+  elseif a:lchar == "[" || a:lchar == "]"
+    let l:opnParChar = "["
+    let l:clsParChar = "]"
+  elseif a:lchar == "{" || a:lchar == "}"
+    let l:opnParChar = "{"
+    let l:clsParChar = "}"
+  else
+    return 0
+  endif
+
+  let l:line = getline(a:lnum)
+
+  " look for the first ! which is not part of a string 
+  let l:len = s:RapidLenTilStr(a:lnum,"!",0)
+  if l:len == 0
+    return 0 " first char is !; ignored
+  endif
+
+  let l:opnParen = 0
+  " count opening brakets
+  let l:i = 0
+  while l:i >= 0
+    let l:i = s:RapidLenTilStr(a:lnum, l:opnParChar, l:i)
+    if l:i >= 0
+      let l:opnParen += 1
+      let l:i += 1
+    endif
+  endwhile
+
+  let l:clsParen = 0
+  " count closing brakets
+  let l:i = 0
+  while l:i >= 0
+    let l:i = s:RapidLenTilStr(a:lnum, l:clsParChar, l:i)
+    if l:i >= 0
+      let l:clsParen += 1
+      let l:i += 1
+    endif
+  endwhile
+
+  if (a:lchar == "(" || a:lchar == "[" || a:lchar == "{") && l:opnParen>l:clsParen
+    return (l:opnParen-l:clsParen)
+  elseif (a:lchar == ")" || a:lchar == "]" || a:lchar == "}") && l:clsParen>l:opnParen
+    return (l:clsParen-l:opnParen)
+  endif
+
+  return 0
+endfunction
+
+" This function works almost like prevnonblank() but handles %%%-headers and
+" comments like blank lines
+function s:RapidPreNoneBlank(lnum) abort
+
+  let nPreNoneBlank = prevnonblank(a:lnum)
+
+  while nPreNoneBlank>0 && getline(nPreNoneBlank) =~ '\v\c^\s*(\%\%\%|!)'
+    " Previouse none blank line irrelevant. Look further aback.
+    let nPreNoneBlank = prevnonblank(nPreNoneBlank - 1)
+  endwhile
+
+  return nPreNoneBlank
+endfunction
+
+let &cpo = s:keepcpo
+unlet s:keepcpo
+
+" vim:sw=2 sts=2 et

runtime/indent/testdir/rapid.in

@@ -0,0 +1,266 @@
+! vim: set ft=rapid :
+
+! START_INDENT
+
+%%%
+  VERSION:1
+  LANGUAGE:ENGLISH
+%%%
+  
+module LowerCaseModule
+
+task pers num n1 := 0;
+local pers num n2 := 1;
+var bool b1 := false;
+var intnum i1;
+
+! put some stuff in those strings that may confuse indentation
+const string st1 := "endmodule ("; 
+pers string st_Appl_Info{3,3}:=[
+[
+"["
+,
+"default"
+,
+"case"
+],
+[
+"else"
+,
+"then"
+,
+"endif"
+],
+[
+"do"
+,
+"}"
+,
+")"
+],
+];
+
+pers tooldata tTool1:=[TRUE, 
+[
+[97.4, 0, 223.1], 
+[0.924, 0, 0.383 ,0]
+], 
+[5, 
+[23, 0, 75], 
+[1, 0, 0, 0], 0, 0, 0
+]
+];
+const robtarget p1:=[ 
+[600, 500, 225.3], 
+[1, 0, 0, 0], 
+[1, 1, 0, 0], 
+[ 11, 12.3, 9E9, 9E9, 9E9, 9E9]
+];
+
+record myRec
+num nRecNum1
+bool bRecBool1
+endrecord
+
+proc proc1(num n1,
+num n2)
+var string st1;
+n1 := n1+1;
+MoveJSync p1, vmax, z30, tool1, "proc2";
+backward
+MoveJSync p1, v100, fine, tool1, "proc2";
+undo
+n1 := n1-1;
+error
+trynext;
+endproc
+
+func num nFunc1(
+switch s1
+|switch s2
+,num n1
+,bool b1)
+var num nVar;
+if not Present(s1) return;
+if Present(s1) then
+Incr n1;'
+elseif Present(s2) then
+b1:=false;
+else
+while n1>0 do
+Decr n1;
+test n1
+
+case 1:
+test1;
+case 2:
+test2;
+default:
+WaitUntil false;
+endtest
+endwhile
+endif
+for i from 1 to 10 step 2 do
+for j from 1 to 10 do
+st_Appl_Info{i,j} := "";
+endfor
+endfor
+!     return 1;
+return 0;
+error
+return -1;
+endfunc
+
+trap Trap1
+Reset do1;
+endtrap
+
+endmodule
+
+MODULE UpperCaseModule(SYSMODULE,NOSTEPIN)
+TASK pers num n1 := 0;
+LOCAL pers num n2 := 1;
+VAR bool b1 := false;
+VAR intnum i1;
+
+LOCAL FUNC num nFunc1(
+switch s1
+|switch s2
+,num n1
+,bool b1)
+VAR num nVar;
+IF NOT PRESENT(s1) RETURN;
+IF PRESENT(s1) THEN
+INCR n1;'
+ELSEIF PRESENT(s2) THEN
+b1:=FALSE;
+ELSE
+WHILE n1>0 DO
+DECR n1;
+TEST n1
+
+CASE 1:
+test1;
+CASE 2:
+test2;
+DEFAULT:
+WAITUNTIL FALSE;
+ENDTEST
+ENDWHILE
+ENDIF
+FOR i FROM 1 TO 10 STEP 2 DO
+FOR j FROM 1 TO 10 DO
+st_Appl_Info{i,j} := "";
+ENDFOR
+ENDFOR
+!     RETURN 1;
+RETURN 0;
+ERROR
+RETURN -1;
+ENDFUNC
+
+TRAP Trap1
+Reset do1;
+ENDTRAP
+
+ENDMODULE
+
+Module MixedCaseModule(SysModule)
+Task pers num n1 := 0;
+Local pers num n2 := 1;
+Var bool b1 := false;
+Var intnum i1;
+
+Task Func num nFunc1(
+switch s1
+|switch s2
+,num n1
+,bool b1)
+Var num nVar;
+If Not Present(s1) Return;
+If Present(s1) Then
+Incr n1;'
+ElseIf Present(s2) Then
+b1:=false;
+Else
+While n1>0 Do
+Decr n1;
+Test n1
+
+Case 1:
+test1;
+Case 2:
+test2;
+Default:
+WaitUntil false;
+EndTest
+EndWhile
+EndIf
+For i From 1 To 10 Step 2 Do
+For j From 1 To 10 Do
+st_Appl_Info{i,j} := "";
+EndFor
+EndFor
+!     Return 1;
+Return 0;
+Error
+Return -1;
+EndFunc
+
+Trap Trap1
+Reset do1;
+EndTrap
+
+EndModule
+
+! END_INDENT
+
+! START_INDENT
+! INDENT_EXE let g:rapidSpaceIndent = 0
+! INDENT_EXE set shiftwidth=4
+
+proc bla()
+var num i;
+Incr i;
+endproc
+
+! END_INDENT
+
+! START_INDENT
+! INDENT_EXE let g:rapidCommentIndent = 1
+!
+proc bla()
+! indent this first column comment because of g:rapidCommentIndent=1
+endproc
+! END_INDENT
+
+! START_INDENT
+! INDENT_EXE let g:rapidNewStyleIndent = 1
+pers string st_Appl_Info{3,3}:=
+[
+[
+"["
+,
+"default"
+,
+"case"
+]
+,
+[
+"else"
+,
+"then"
+,
+"endif"
+]
+,
+[
+"do"
+,
+"}"
+,
+")"
+]
+,
+];
+! END_INDENT

runtime/indent/testdir/rapid.ok

@@ -0,0 +1,266 @@
+! vim: set ft=rapid :
+
+! START_INDENT
+
+%%%
+VERSION:1
+LANGUAGE:ENGLISH
+%%%
+
+module LowerCaseModule
+
+  task pers num n1 := 0;
+  local pers num n2 := 1;
+  var bool b1 := false;
+  var intnum i1;
+
+! put some stuff in those strings that may confuse indentation
+  const string st1 := "endmodule ("; 
+  pers string st_Appl_Info{3,3}:=[
+          [
+                  "["
+                  ,
+                  "default"
+                  ,
+                  "case"
+                  ],
+          [
+                  "else"
+                  ,
+                  "then"
+                  ,
+                  "endif"
+                  ],
+          [
+                  "do"
+                  ,
+                  "}"
+                  ,
+                  ")"
+                  ],
+          ];
+
+  pers tooldata tTool1:=[TRUE, 
+          [
+                  [97.4, 0, 223.1], 
+                  [0.924, 0, 0.383 ,0]
+                  ], 
+          [5, 
+                  [23, 0, 75], 
+                  [1, 0, 0, 0], 0, 0, 0
+                  ]
+          ];
+  const robtarget p1:=[ 
+          [600, 500, 225.3], 
+          [1, 0, 0, 0], 
+          [1, 1, 0, 0], 
+          [ 11, 12.3, 9E9, 9E9, 9E9, 9E9]
+          ];
+
+  record myRec
+    num nRecNum1
+    bool bRecBool1
+  endrecord
+
+  proc proc1(num n1,
+            num n2)
+    var string st1;
+    n1 := n1+1;
+    MoveJSync p1, vmax, z30, tool1, "proc2";
+  backward
+    MoveJSync p1, v100, fine, tool1, "proc2";
+  undo
+    n1 := n1-1;
+  error
+    trynext;
+  endproc
+
+  func num nFunc1(
+            switch s1
+            |switch s2
+            ,num n1
+            ,bool b1)
+    var num nVar;
+    if not Present(s1) return;
+    if Present(s1) then
+      Incr n1;'
+    elseif Present(s2) then
+      b1:=false;
+    else
+      while n1>0 do
+        Decr n1;
+        test n1
+
+        case 1:
+          test1;
+        case 2:
+          test2;
+        default:
+          WaitUntil false;
+        endtest
+      endwhile
+    endif
+    for i from 1 to 10 step 2 do
+      for j from 1 to 10 do
+        st_Appl_Info{i,j} := "";
+      endfor
+    endfor
+!     return 1;
+    return 0;
+  error
+    return -1;
+  endfunc
+
+  trap Trap1
+    Reset do1;
+  endtrap
+
+endmodule
+
+MODULE UpperCaseModule(SYSMODULE,NOSTEPIN)
+  TASK pers num n1 := 0;
+  LOCAL pers num n2 := 1;
+  VAR bool b1 := false;
+  VAR intnum i1;
+
+  LOCAL FUNC num nFunc1(
+            switch s1
+            |switch s2
+            ,num n1
+            ,bool b1)
+    VAR num nVar;
+    IF NOT PRESENT(s1) RETURN;
+    IF PRESENT(s1) THEN
+      INCR n1;'
+    ELSEIF PRESENT(s2) THEN
+      b1:=FALSE;
+    ELSE
+      WHILE n1>0 DO
+        DECR n1;
+        TEST n1
+
+        CASE 1:
+          test1;
+        CASE 2:
+          test2;
+        DEFAULT:
+          WAITUNTIL FALSE;
+        ENDTEST
+      ENDWHILE
+    ENDIF
+    FOR i FROM 1 TO 10 STEP 2 DO
+      FOR j FROM 1 TO 10 DO
+        st_Appl_Info{i,j} := "";
+      ENDFOR
+    ENDFOR
+!     RETURN 1;
+    RETURN 0;
+  ERROR
+    RETURN -1;
+  ENDFUNC
+
+  TRAP Trap1
+    Reset do1;
+  ENDTRAP
+
+ENDMODULE
+
+Module MixedCaseModule(SysModule)
+  Task pers num n1 := 0;
+  Local pers num n2 := 1;
+  Var bool b1 := false;
+  Var intnum i1;
+
+  Task Func num nFunc1(
+            switch s1
+            |switch s2
+            ,num n1
+            ,bool b1)
+    Var num nVar;
+    If Not Present(s1) Return;
+    If Present(s1) Then
+      Incr n1;'
+    ElseIf Present(s2) Then
+      b1:=false;
+    Else
+      While n1>0 Do
+        Decr n1;
+        Test n1
+
+        Case 1:
+          test1;
+        Case 2:
+          test2;
+        Default:
+          WaitUntil false;
+        EndTest
+      EndWhile
+    EndIf
+    For i From 1 To 10 Step 2 Do
+      For j From 1 To 10 Do
+        st_Appl_Info{i,j} := "";
+      EndFor
+    EndFor
+!     Return 1;
+    Return 0;
+  Error
+    Return -1;
+  EndFunc
+
+  Trap Trap1
+    Reset do1;
+  EndTrap
+
+EndModule
+
+! END_INDENT
+
+! START_INDENT
+! INDENT_EXE let g:rapidSpaceIndent = 0
+! INDENT_EXE set shiftwidth=4
+
+proc bla()
+    var num i;
+    Incr i;
+endproc
+
+! END_INDENT
+
+! START_INDENT
+! INDENT_EXE let g:rapidCommentIndent = 1
+!
+proc bla()
+    ! indent this first column comment because of g:rapidCommentIndent=1
+endproc
+! END_INDENT
+
+! START_INDENT
+! INDENT_EXE let g:rapidNewStyleIndent = 1
+pers string st_Appl_Info{3,3}:=
+[
+                [
+                                "["
+                                ,
+                                "default"
+                                ,
+                                "case"
+                ]
+                ,
+                [
+                                "else"
+                                ,
+                                "then"
+                                ,
+                                "endif"
+                ]
+                ,
+                [
+                                "do"
+                                ,
+                                "}"
+                                ,
+                                ")"
+                ]
+                ,
+];
+! END_INDENT

runtime/indent/testdir/vim.in

@@ -483,6 +483,13 @@ endif
 endif
 " END_INDENT
 
+" START_INDENT
+if true
+var d = {
+end: 0}
+endif
+" END_INDENT
+
 " START_INDENT
 nunmap <buffer> (
 nunmap <buffer> )

runtime/indent/testdir/vim.ok

@@ -483,6 +483,13 @@ if true
 endif
 " END_INDENT
 
+" START_INDENT
+if true
+    var d = {
+	end: 0}
+endif
+" END_INDENT
+
 " START_INDENT
 nunmap <buffer> (
 nunmap <buffer> )

runtime/indent/vim.vim

@@ -2,8 +2,9 @@ vim9script
 
 # Vim indent file
 # Language:	Vim script
-# Maintainer:	Bram Moolenaar <Bram@vim.org>
-# Last Change:	2023 Feb 02
+# Maintainer:	The Vim Project <https://github.com/vim/vim>
+# Last Change:	2023 Aug 10
+# Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 # Only load this indent file when no other was loaded.
 if exists('b:did_indent')

runtime/indent/xhtml.vim

@@ -1,7 +1,8 @@
 " Vim indent file
 " Language:	XHTML
-" Maintainer:	Bram Moolenaar <Bram@vim.org> (for now)
-" Last Change:	2005 Jun 24
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")

runtime/indent/zimbu.vim

@@ -1,7 +1,8 @@
 " Vim indent file
 " Language:	Zimbu
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2021 Sep 26
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")

runtime/indoff.vim

@@ -1,7 +1,8 @@
 " Vim support file to switch off loading indent files for file types
 "
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2001 Jun 11
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 if exists("did_indent_on")
   unlet did_indent_on

runtime/keymap/russian-typograph.vim

@@ -1,54 +1,140 @@
 " Vim Keymap file for Russian characters
-" layout English-US standard 104 key 'QWERTY', 'JCUKEN'
+" layout English-US 104 key 'QWERTY'
 "
-" Maintainer:	Restorer <restorers@users.sourceforge.net>
-" Last Changed: 20 Jan 2019
-" Description:  Раскладка сделана на основе раскладки «русская машинопись»
-" (KBDRU1.DLL), поставляемой в составе ОС MS Windows. Эта раскладка позволяет
-" печать практически все знаки препинания используя цифровой ряд и не требуя при
-" этом нажатия дополнительных клавиш, ну и также удобное расположение буквы «Ё».
-" Однако были внесены некоторые дополнения (улучшения?), в частности:
-" ‐ раздельные символы круглых скобок (), расположены на тех же позициях, что и
-" в US-International;
-" ‐ раздельные символы типографских кавычек «», расположены на клавишах «3» и
-" «4» соответственно;
-" ‐ на этих же клавишах находятся внутренние кавычки “лапки”, набираемые при
-" нажатой клавише «ALT»;
-" ‐ возможность набирать символы, отсутствующие в русской раскладке клавиатуры,
-" а именно @#$^&*{}[]"'`~<>, которые расположены на тех же местах, что и раньше.
-" Для этого не требуется переключаться в латинскую раскладку клавиатуры, а
-" оставаясь в русской, использовать для этого дополнительные клавиши «SHIFT» и
-" «ALT»;
-" ‐ и ещё несколько удобств, которые позволяют быстро и с минимальными усилиями
-" набирать текст.
+" Maintainer:	 Restorer <restorer@mail2k.ru>
+" Last Changed:	 25 Apr 2023
+" Version:	 3.3
+" Description:	 описание дано после изображений клавиатуры
 
-scriptencoding utf-8
+" Расположение символов для русского языка при подключенном файле с раскладкой
+" клавиатуры «русская типографская» (russian-typograph.vim). Версия 3.3
 
-" Переключение языка ввода со стандартного сочетания <CTRL+^> на указанные ниже
-" Для режимов вставки и замены
-""или SHIFT+SPACE
-"        inoremap <S-Space> <C-^>
-""или CTRL+SPACE"
-"        inoremap <C-Space> <C-^>
-" Для режима командной строки
-""или SHIFT+SPACE
-"        cnoremap <S-Space> <C-^>
-""или CTRL+SPACE"
-"        cnoremap <C-Space> <C-^>
-" Одной командой для режимов вставки, замены и командной строки
-"        noremap! <S-Space> <C-^>
-"        noremap! <C-Space> <C-^>
+
+"		  Ни одна из клавиш модификаторов не нажата
+
+"	  ,---,---,---,---,---,---,---,---,---,---,---,---,---,-------,
+"	  | % | ! | — | « | » | : | , | . | ? | ( | ) | ‐ | ; | <---  |
+"	  |---'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-----|
+"	  | ->| | й | ц | у | к | е | н | г | ш | щ | з | х | ъ |  /  |
+"	  |-----',--',--',--',--',--',--',--',--',--',--',--',--'-----|
+"	  | Caps | ф | ы | в | а | п | р | о | л | д | ж | э |  Enter |
+"	  |------'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'--------|
+"	  | Shift  | я | ч | с | м | и | т | ь | б | ю | ё |  Shift   |
+"	  |------,-',--'--,'---'---'---'---'---'---'-,-'---',--,------|
+"	  | Ctrl |  | Alt |                          | Alt  |  | Ctrl |
+"	  '------'  '-----'--------------------------'------'  '------'
+
+
+"			    Нажата клавиша SHIFT
+
+"	  ,---,---,---,---,---,---,---,---,---,---,---,---,---,-------,
+"	  | = | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | + | <---  |
+"	  |---'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-----|
+"	  | ->| | Й | Ц | У | К | Е | Н | Г | Ш | Щ | З | Х | Ъ |  §  |
+"	  |-----',--',--',--',--',--',--',--',--',--',--',--',--'-----|
+"	  | Caps | Ф | Ы | В | А | П | Р | О | Л | Д | Ж | Э |  Enter |
+"	  |------'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'--------|
+"	  | SHIFT  | Я | Ч | С | М | И | Т | Ь | Б | Ю | Ё |   SHIFT  |
+"	  |------,-',--'--,'---'---'---'---'---'---'-,-'---',--,------|
+"	  | Ctrl |  | Alt |                          | Alt  |  | Ctrl |
+"	  '------'  '-----'--------------------------'------'  '------'
+
+
+"			     Нажата клавиша ALT
+
+"	  ,---,---,---,---,---,---,---,---,---,---,---,---,---,-------,
+"	  | ` | № | – | „ | “ |   |   | … |   |   |   | ‑ | ± | <---  |
+"	  |---'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-----|
+"	  | ->| |   |   |   |   |   |   |   |   |   |   | [ | ] |  \  |
+"	  |-----',--',--',--',--',--',--',--',--',--',--',--',--'-----|
+"	  | Caps |   |   |   |   |   | ₽ |   |   |   |   | ' |  Enter |
+"	  |------'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'--------|
+"	  | Shift  |   |   |   |   |   |   |   |   |   |   |  Shift   |
+"	  |------,-',--'--,'---'---'---'---'---'---'-,-'---',--,------|
+"	  | Ctrl |  | ALT |          NNBSP           | ALT  |  | Ctrl |
+"	  '------'  '-----'--------------------------'------'  '------'
+
+
+"			 Нажаты клавиши SHIFT и ALT
+
+"	  ,---,---,---,---,---,---,---,---,---,---,---,---,---,-------,
+"	  | ~ |   | @ | # | $ |   | ^ | & | * |   |   | _ |   | <---  |
+"	  |---'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-----|
+"	  | ->| |   |   |   |   |   |   |   |   |   |   | { | } |  |  |
+"	  |-----',--',--',--',--',--',--',--',--',--',--',--',--'-----|
+"	  | Caps |   |   |   |   |   |   |   |   |   |   | " |  Enter |
+"	  |------'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'--------|
+"	  | SHIFT  |   |   |   |   |   |   |   | < | > |   |  SHIFT   |
+"	  |------,-',--'--,'---'---'---'---'---'---'-,-'---',--,------|
+"	  | Ctrl |  | ALT |                          | ALT  |  | Ctrl |
+"	  '------'  '-----'--------------------------'------'  '------'
+
+
+"			 Нажаты клавиши SHIFT и CTRL
+
+"	  ,---,---,---,---,---,---,---,---,---,---,---,---,---,-------,
+"	  |   |   |   |   |   |   |   |   |   |   |   |   |   | <---  |
+"	  |---'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-----|
+"	  | ->| |   |   |   |   |   |   |   |   |   |   |   |   |     |
+"	  |-----',--',--',--',--',--',--',--',--',--',--',--',--'-----|
+"	  | Caps |   |   |   |   |   |   |   |   |   |   |   |  Enter |
+"	  |------'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'--------|
+"	  | SHIFT  |   |   |   |   |   |   |   |   |   |   |  SHIFT   |
+"	  |------,-',--'--,'---'---'---'---'---'---'-,-'---',--,------|
+"	  | CTRL |  | Alt |          NBSP            | Alt  |  | CTRL |
+"	  '------'  '-----'--------------------------'------'  '------'
+
+
+"			 Нажаты клавиши ALT и CTRL
+
+"	  ,---,---,---,---,---,---,---,---,---,---,---,---,---,-------,
+"	  |   |   |   |   |   |   |   |   |   |   |   |   |   | <---  |
+"	  |---'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-----|
+"	  | ->| |   |   | у́ |   | е́ |   |   |   |   |   |   |   |     |
+"	  |-----',--',--',--',--',--',--',--',--',--',--',--',--'-----|
+"	  | Caps |   | ы́ |   | а́ |   |   | о́ |   |   |   | э́ |  Enter |
+"	  |------'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'--------|
+"	  | Shift  | я́ |   |   |   | и́ |   |   |   | ю́ |   |  Shift   |
+"	  |------,-',--'--,'---'---'---'---'---'---'-,-'---',--,------|
+"	  | CTRL |  | ALT |                          | ALT  |  | CTRL |
+"	  '------'  '-----'--------------------------'------'  '------'
+
+
+"			 Нажаты клавиши SHIFT, ALT и CTRL
+
+"	  ,---,---,---,---,---,---,---,---,---,---,---,---,---,-------,
+"	  |   |   |   |   |   |   |   |   |   |   |   |   |   | <---  |
+"	  |---'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-----|
+"	  | ->| |   |   | У́ |   | Е́ |   |   |   |   |   |   |   |     |
+"	  |-----',--',--',--',--',--',--',--',--',--',--',--',--'-----|
+"	  | Caps |   | Ы́ |   | А́ |   |   | О́ |   |   |   | Э́ |  Enter |
+"	  |------'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'-,-'--------|
+"	  | SHIFT  | Я́ |   |   |   | И́ |   |   |   | Ю́ |   |  SHIFT   |
+"	  |------,-',--'--,'---'---'---'---'---'---'-,-'---',--,------|
+"	  | CTRL |  | ALT |                          | ALT  |  | CTRL |
+"	  '------'  '-----'--------------------------'------'  '------'
+
+
+" Раскладка сделана на основе раскладки «русская машинопись» (KBDRU1.DLL),
+" поставляемой в составе ОС MS Windows.
 "
-" Стандартное переключение по CTRL+^ после этих переназначений также сохраняется
+" Как видите, принцип достаточно простой, — при наборе русского текста все
+" буквы, знаки пунктуации и большинство специальных символов находятся под
+" пальцами и их набор не требует нажатия каких-то дополнительных клавиш.  При
+" наборе символов, которые отсутствуют в русской раскладке, но есть в раскладке
+" US-International, требуется нажать или клавишу <ALT>, если в английской
+" раскладке они набираются без модификаторов, или нажать <ALT>+<SHIFT>, если они
+" набираются с модификатором <SHIFT>.
+
+" scriptencoding utf-8
 
 let b:keymap_name ="RUS"
 
 loadkeymap
 
-"	    DIGITAL ROW
+"		DIGITAL ROW
 
-"	The Shift key is not pressed
-"
+"	None of the modifier keys are pressed
 <char-0x0060>	    <char-0x0025>	" PERCENT SIGN
 <char-0x0031>	    <char-0x0021>	" EXCLAMATION MARK
 <char-0x0032>	    <char-0x2014>	" EM DASH
@@ -63,8 +149,7 @@ loadkeymap
 <char-0x002d>	    <char-0x2010>	" HYPHEN
 <char-0x003d>	    <char-0x003b>	" SEMICOLON
 
-"	The Shift key is pressed
-
+"	The SHIFT key is pressed
 <char-0x007e>	    <char-0x003d>	" EQUALS SIGN
 <char-0x0021>	    <char-0x0031>	" DIGIT ONE
 <char-0x0040>	    <char-0x0032>	" DIGIT TWO
@@ -79,112 +164,188 @@ loadkeymap
 <char-0x005f>	    <char-0x002d>	" HYPHEN-MINUS
 <char-0x002b>	    <char-0x002b>	" PLUS SIGN
 
-"	    ALPHABETICAL 1st ROW
-
-<char-0x0071>	    <char-0x0439>	" CYRILLIC SMALL LETTER SHORT I
-<char-0x0051>	    <char-0x0419>	" CYRILLIC CAPITAL LETTER SHORT I
-<char-0x0077>	    <char-0x0446>	" CYRILLIC SMALL LETTER TSE
-<char-0x0057>	    <char-0x0426>	" CYRILLIC CAPITAL LETTER TSE
-<char-0x0065>	    <char-0x0443>	" CYRILLIC SMALL LETTER U
-<char-0x0045>	    <char-0x0423>	" CYRILLIC CAPITAL LETTER U
-<char-0x0072>	    <char-0x043a>	" CYRILLIC SMALL LETTER KA
-<char-0x0052>	    <char-0x041a>	" CYRILLIC CAPITAL LETTER KA
-<char-0x0074>	    <char-0x0435>	" CYRILLIC SMALL LETTER IE
-<char-0x0054>	    <char-0x0415>	" CYRILLIC CAPITAL LETTER IE
-<char-0x0079>	    <char-0x043d>	" CYRILLIC SMALL LETTER EN
-<char-0x0059>	    <char-0x041d>	" CYRILLIC CAPITAL LETTER EN
-<char-0x0075>	    <char-0x0433>	" CYRILLIC SMALL LETTER GHE
-<char-0x0055>	    <char-0x0413>	" CYRILLIC CAPITAL LETTER GHE
-<char-0x0069>	    <char-0x0448>	" CYRILLIC SMALL LETTER SHA
-<char-0x0049>	    <char-0x0428>	" CYRILLIC CAPITAL LETTER SHA
-<char-0x006f>	    <char-0x0449>	" CYRILLIC SMALL LETTER SHCHA
-<char-0x004f>	    <char-0x0429>	" CYRILLIC CAPITAL LETTER SHCHA
-<char-0x0070>	    <char-0x0437>	" CYRILLIC SMALL LETTER ZE
-<char-0x0050>	    <char-0x0417>	" CYRILLIC CAPITAL LETTER ZE
-<char-0x005b>	    <char-0x0445>	" CYRILLIC SMALL LETTER HA
-<char-0x007b>	    <char-0x0425>	" CYRILLIC CAPITAL LETTER HA
-<char-0x005d>	    <char-0x044a>	" CYRILLIC SMALL LETTER HARD SIGN
-<char-0x007d>	    <char-0x042a>	" CYRILLIC CAPITAL LETTER HARD SIGN
-
-"	    ALPHABETIC 2nd ROW
-
-<char-0x0061>	    <char-0x0444>	" CYRILLIC SMALL LETTER EF
-<char-0x0041>	    <char-0x0424>	" CYRILLIC CAPITAL LETTER EF
-<char-0x0073>	    <char-0x044b>	" CYRILLIC SMALL LETTER YERU
-<char-0x0053>	    <char-0x042b>	" CYRILLIC CAPITAL LETTER YERU
-<char-0x0064>	    <char-0x0432>	" CYRILLIC SMALL LETTER VE
-<char-0x0044>	    <char-0x0412>	" CYRILLIC CAPITAL LETTER VE
-<char-0x0066>	    <char-0x0430>	" CYRILLIC SMALL LETTER A
-<char-0x0046>	    <char-0x0410>	" CYRILLIC CAPITAL LETTER A
-<char-0x0067>	    <char-0x043f>	" CYRILLIC SMALL LETTER PE
-<char-0x0047>	    <char-0x041f>	" CYRILLIC CAPITAL LETTER PE
-<char-0x0068>	    <char-0x0440>	" CYRILLIC SMALL LETTER ER
-<char-0x0048>	    <char-0x0420>	" CYRILLIC CAPITAL LETTER ER
-<char-0x006a>	    <char-0x043e>	" CYRILLIC SMALL LETTER O
-<char-0x004a>	    <char-0x041e>	" CYRILLIC CAPITAL LETTER O
-<char-0x006b>	    <char-0x043b>	" CYRILLIC SMALL LETTER EL
-<char-0x004b>	    <char-0x041b>	" CYRILLIC CAPITAL LETTER EL
-<char-0x006c>	    <char-0x0434>	" CYRILLIC SMALL LETTER DE
-<char-0x004c>	    <char-0x0414>	" CYRILLIC CAPITAL LETTER DE
-<char-0x003b>	    <char-0x0436>	" CYRILLIC SMALL LETTER ZHE
-<char-0x003a>	    <char-0x0416>	" CYRILLIC CAPITAL LETTER ZHE
-<char-0x0027>	    <char-0x044d>	" CYRILLIC SMALL LETTER E
-<char-0x0022>	    <char-0x042d>	" CYRILLIC CAPITAL LETTER E
-
-"	    ALPHABETIC 3rd ROW
-
-<char-0x007a>	    <char-0x044f>	" CYRILLIC SMALL LETTER YA
-<char-0x005a>	    <char-0x042f>	" CYRILLIC CAPITAL LETTER YA
-<char-0x0078>	    <char-0x0447>	" CYRILLIC SMALL LETTER CHE
-<char-0x0058>	    <char-0x0427>	" CYRILLIC CAPITAL LETTER CHE
-<char-0x0063>	    <char-0x0441>	" CYRILLIC SMALL LETTER ES
-<char-0x0043>	    <char-0x0421>	" CYRILLIC CAPITAL LETTER ES
-<char-0x0076>	    <char-0x043c>	" CYRILLIC SMALL LETTER EM
-<char-0x0056>	    <char-0x041c>	" CYRILLIC CAPITAL LETTER EM
-<char-0x0062>	    <char-0x0438>	" CYRILLIC SMALL LETTER I
-<char-0x0042>	    <char-0x0418>	" CYRILLIC CAPITAL LETTER I
-<char-0x006e>	    <char-0x0442>	" CYRILLIC SMALL LETTER TE
-<char-0x004e>	    <char-0x0422>	" CYRILLIC CAPITAL LETTER TE
-<char-0x006d>	    <char-0x044c>	" CYRILLIC SMALL LETTER SOFT SIGN
-<char-0x004d>	    <char-0x042c>	" CYRILLIC CAPITAL LETTER SOFT SIGN
-<char-0x002c>	    <char-0x0431>	" CYRILLIC SMALL LETTER BE
-<char-0x003c>	    <char-0x0411>	" CYRILLIC CAPITAL LETTER BE
-<char-0x002e>	    <char-0x044e>	" CYRILLIC SMALL LETTER YU
-<char-0x003e>	    <char-0x042e>	" CYRILLIC CAPITAL LETTER YU
-<char-0x002f>	    <char-0x0451>	" CYRILLIC SMALL LETTER IO
-<char-0x003f>	    <char-0x0401>	" CYRILLIC CAPITAL LETTER IO
-
-"	    VK_OEM_5 key (scan code 2b)
-
-"	The Shift key is not pressed
-<char-0x005c>	    <char-0x002f>	" SOLIDUS
-"	The Shift key is pressed
-<char-0x007c>	    <char-0x005c>	" REVERSE SOLIDUS
-
-"	    Alt key pressed
-
+"	The ALT key pressed
 <A-char-0x0060>	    <char-0x0060>	" GRAVE ACCENT 
 <A-char-0x0031>	    <char-0x2116>       " NUMERO SIGN
-<A-char-0x0033>	    <char-0x201c>	" LEFT DOUBLE QUOTATION MARK
-<A-char-0x0034>	    <char-0x201d>	" RIGHT DOUBLE QUOTATION MARK
+<A-char-0x0032>	    <char-0x2013>	" EN DASH
+<A-char-0x0033>	    <char-0x201e>	" DOUBLE LOW-9 QUOTATION MARK
+<A-char-0x0034>	    <char-0x201c>	" LEFT DOUBLE QUOTATION MARK
+<A-char-0x0037>	    <char-0x2026>	" HORIZONTAL ELLIPSIS
+<A-char-0x002d>	    <char-0x2011>	" NON-BREAKING HYPHEN
+<A-char-0x003d>	    <char-0x00b1>	" PLUS-MINUS SIGN
+
+"	The SHIFT and ALT keys pressed
+<A-char-0x007e>	    <char-0x007e>	" TILDE
+<A-char-0x0040>	    <char-0x0040>	" COMMERCIAL AT
+<A-char-0x0023>	    <char-0x0023>	" NUMBER SIGN
+<A-char-0x0024>	    <char-0x0024>	" DOLLAR SIGN
+<A-char-0x005e>	    <char-0x005e>	" CIRCUMFLEX ACCENT
+<A-char-0x0026>	    <char-0x0026>	" AMPERSAND
+<A-char-0x002a>	    <char-0x002a>	" ASTERISK
+<A-char-0x005f>	    <char-0x005f>	" LOW LINE
+
+
+"		ALPHABETICAL 1st ROW
+
+"	None of the modifier keys are pressed
+<char-0x0071>	    <char-0x0439>	" CYRILLIC SMALL LETTER SHORT I
+<char-0x0077>	    <char-0x0446>	" CYRILLIC SMALL LETTER TSE
+<char-0x0065>	    <char-0x0443>	" CYRILLIC SMALL LETTER U
+<char-0x0072>	    <char-0x043a>	" CYRILLIC SMALL LETTER KA
+<char-0x0074>	    <char-0x0435>	" CYRILLIC SMALL LETTER IE
+<char-0x0079>	    <char-0x043d>	" CYRILLIC SMALL LETTER EN
+<char-0x0075>	    <char-0x0433>	" CYRILLIC SMALL LETTER GHE
+<char-0x0069>	    <char-0x0448>	" CYRILLIC SMALL LETTER SHA
+<char-0x006f>	    <char-0x0449>	" CYRILLIC SMALL LETTER SHCHA
+<char-0x0070>	    <char-0x0437>	" CYRILLIC SMALL LETTER ZE
+<char-0x005b>	    <char-0x0445>	" CYRILLIC SMALL LETTER HA
+<char-0x005d>	    <char-0x044a>	" CYRILLIC SMALL LETTER HARD SIGN
+
+"	The SHIFT key is pressed
+<char-0x0051>	    <char-0x0419>	" CYRILLIC CAPITAL LETTER SHORT I
+<char-0x0057>	    <char-0x0426>	" CYRILLIC CAPITAL LETTER TSE
+<char-0x0045>	    <char-0x0423>	" CYRILLIC CAPITAL LETTER U
+<char-0x0052>	    <char-0x041a>	" CYRILLIC CAPITAL LETTER KA
+<char-0x0054>	    <char-0x0415>	" CYRILLIC CAPITAL LETTER IE
+<char-0x0059>	    <char-0x041d>	" CYRILLIC CAPITAL LETTER EN
+<char-0x0055>	    <char-0x0413>	" CYRILLIC CAPITAL LETTER GHE
+<char-0x0049>	    <char-0x0428>	" CYRILLIC CAPITAL LETTER SHA
+<char-0x004f>	    <char-0x0429>	" CYRILLIC CAPITAL LETTER SHCHA
+<char-0x0050>	    <char-0x0417>	" CYRILLIC CAPITAL LETTER ZE
+<char-0x007b>	    <char-0x0425>	" CYRILLIC CAPITAL LETTER HA
+<char-0x007d>	    <char-0x042a>	" CYRILLIC CAPITAL LETTER HARD SIGN
+
+"	The ALT key pressed
 <A-char-0x005b>	    <char-0x005b>       " LEFT SQUARE BRACKET
 <A-char-0x005d>	    <char-0x005d>       " RIGHT SQUARE BRACKET
-<A-char-0x0027>	    <char-0x0027>       " APOSTROPHE
 
-"	    Alt and Shift keys pressed
-
-<A-char-0x007e>	    <char-0x007e>	" TILDE
-<A-char-0x0040>	    <char-0x0040>       " COMMERCIAL AT
-<A-char-0x0023>	    <char-0x0023>       " NUMBER SIGN
-<A-char-0x0024>	    <char-0x0024>       " DOLLAR SIGN
-<A-char-0x005e>	    <char-0x005e>       " CIRCUMFLEX ACCENT
-<A-char-0x0026>	    <char-0x0026>       " AMPERSAND
-<A-char-0x002a>	    <char-0x002a>       " ASTERISK
-<A-char-0x005f>	    <char-0x005f>       " LOW LINE
+"	The SHIFT and ALT keys pressed
 <A-char-0x007b>	    <char-0x007b>       " LEFT CURLY BRACKET
 <A-char-0x007d>	    <char-0x007d>       " RIGHT CURLY BRACKET
+
+"	The ALT and CTRL key pressed
+<A-C-char-0x0065>    <char-0x0443><char-0x0301>	" CYRILLIC SMALL LETTER U with COMBINING ACUTE ACCENT
+<A-C-char-0x0074>    <char-0x0435><char-0x0301>	" CYRILLIC SMALL LETTER IE with COMBINING ACUTE ACCENT
+
+"	The SHIFT and ALT and CTRL keys pressed
+<S-A-C-char-0x0045>    <char-0x0423><char-0x0301>   " CYRILLIC CAPITAL LETTER U with COMBINING ACUTE ACCENT
+<S-A-C-char-0x0054>    <char-0x0415><char-0x0301>   " CYRILLIC CAPITAL LETTER IE with COMBINING ACUTE ACCENT
+
+
+"		ALPHABETIC 2st ROW
+
+"	None of the modifier keys are pressed
+<char-0x0061>	    <char-0x0444>	" CYRILLIC SMALL LETTER EF
+<char-0x0073>	    <char-0x044b>	" CYRILLIC SMALL LETTER YERU
+<char-0x0064>	    <char-0x0432>	" CYRILLIC SMALL LETTER VE
+<char-0x0066>	    <char-0x0430>	" CYRILLIC SMALL LETTER A
+<char-0x0067>	    <char-0x043f>	" CYRILLIC SMALL LETTER PE
+<char-0x0068>	    <char-0x0440>	" CYRILLIC SMALL LETTER ER
+<char-0x006a>	    <char-0x043e>	" CYRILLIC SMALL LETTER O
+<char-0x006b>	    <char-0x043b>	" CYRILLIC SMALL LETTER EL
+<char-0x006c>	    <char-0x0434>	" CYRILLIC SMALL LETTER DE
+<char-0x003b>	    <char-0x0436>	" CYRILLIC SMALL LETTER ZHE
+<char-0x0027>	    <char-0x044d>	" CYRILLIC SMALL LETTER E
+
+"	The SHIFT key is pressed
+<char-0x0041>	    <char-0x0424>	" CYRILLIC CAPITAL LETTER EF
+<char-0x0053>	    <char-0x042b>	" CYRILLIC CAPITAL LETTER YERU
+<char-0x0044>	    <char-0x0412>	" CYRILLIC CAPITAL LETTER VE
+<char-0x0046>	    <char-0x0410>	" CYRILLIC CAPITAL LETTER A
+<char-0x0047>	    <char-0x041f>	" CYRILLIC CAPITAL LETTER PE
+<char-0x0048>	    <char-0x0420>	" CYRILLIC CAPITAL LETTER ER
+<char-0x004a>	    <char-0x041e>	" CYRILLIC CAPITAL LETTER O
+<char-0x004b>	    <char-0x041b>	" CYRILLIC CAPITAL LETTER EL
+<char-0x004c>	    <char-0x0414>	" CYRILLIC CAPITAL LETTER DE
+<char-0x003a>	    <char-0x0416>	" CYRILLIC CAPITAL LETTER ZHE
+<char-0x0022>	    <char-0x042d>	" CYRILLIC CAPITAL LETTER E
+
+"	The ALT key pressed
+<A-char-0x0027>	    <char-0x0027>       " APOSTROPHE
+<A-char-0x0068>	    <char-0x20bd>	" RUBLE SIGN
+
+"	The SHIFT and ALT keys pressed
 <A-char-0x0022>	    <char-0x0022>       " QUOTATION MARK
+
+"	The ALT and CTRL key pressed
+<A-C-char-0x0073>    <char-0x044b><char-0x0301>	" CYRILLIC SMALL LETTER YERU with COMBINING ACUTE ACCENT
+<A-C-char-0x0066>    <char-0x0430><char-0x0301>	" CYRILLIC SMALL LETTER A with COMBINING ACUTE ACCENT
+<A-C-char-0x006a>    <char-0x043e><char-0x0301>	" CYRILLIC SMALL LETTER O with COMBINING ACUTE ACCENT
+<A-C-char-0x0027>    <char-0x044d><char-0x0301>	" CYRILLIC SMALL LETTER E with COMBINING ACUTE ACCENT
+
+"	The SHIFT and ALT and CTRL keys pressed
+<S-A-C-char-0x0053>    <char-0x042b><char-0x0301>   " CYRILLIC CAPITAL LETTER YERU with COMBINING ACUTE ACCENT
+<S-A-C-char-0x0046>    <char-0x0410><char-0x0301>   " CYRILLIC CAPITAL LETTER A with COMBINING ACUTE ACCENT
+<S-A-C-char-0x004a>    <char-0x041e><char-0x0301>   " CYRILLIC CAPITAL LETTER O with COMBINING ACUTE ACCENT
+<S-A-C-char-0x0022>    <char-0x042d><char-0x0301>   " CYRILLIC CAPITAL LETTER E with COMBINING ACUTE ACCENT
+
+
+"		ALPHABETIC 3st ROW
+
+"	None of the modifier keys are pressed
+<char-0x007a>	    <char-0x044f>	" CYRILLIC SMALL LETTER YA
+<char-0x0078>	    <char-0x0447>	" CYRILLIC SMALL LETTER CHE
+<char-0x0063>	    <char-0x0441>	" CYRILLIC SMALL LETTER ES
+<char-0x0076>	    <char-0x043c>	" CYRILLIC SMALL LETTER EM
+<char-0x0062>	    <char-0x0438>	" CYRILLIC SMALL LETTER I
+<char-0x006e>	    <char-0x0442>	" CYRILLIC SMALL LETTER TE
+<char-0x006d>	    <char-0x044c>	" CYRILLIC SMALL LETTER SOFT SIGN
+<char-0x002c>	    <char-0x0431>	" CYRILLIC SMALL LETTER BE
+<char-0x002e>	    <char-0x044e>	" CYRILLIC SMALL LETTER YU
+<char-0x002f>	    <char-0x0451>	" CYRILLIC SMALL LETTER IO
+
+"	The SHIFT key is pressed
+<char-0x005a>	    <char-0x042f>	" CYRILLIC CAPITAL LETTER YA
+<char-0x0058>	    <char-0x0427>	" CYRILLIC CAPITAL LETTER CHE
+<char-0x0043>	    <char-0x0421>	" CYRILLIC CAPITAL LETTER ES
+<char-0x0056>	    <char-0x041c>	" CYRILLIC CAPITAL LETTER EM
+<char-0x0042>	    <char-0x0418>	" CYRILLIC CAPITAL LETTER I
+<char-0x004e>	    <char-0x0422>	" CYRILLIC CAPITAL LETTER TE
+<char-0x004d>	    <char-0x042c>	" CYRILLIC CAPITAL LETTER SOFT SIGN
+<char-0x003c>	    <char-0x0411>	" CYRILLIC CAPITAL LETTER BE
+<char-0x003e>	    <char-0x042e>	" CYRILLIC CAPITAL LETTER YU
+<char-0x003f>	    <char-0x0401>	" CYRILLIC CAPITAL LETTER IO
+
+"	The ALT key pressed
+
+
+"	The SHIFT and ALT keys pressed
 <A-char-0x003c>	    <char-0x003c>       " LESS-THAN SIGN
 <A-char-0x003e>	    <char-0x003e>       " GREATER-THAN SIGN
+
+"	The ALT and CTRL key pressed
+<A-C-char-0x007a>    <char-0x044f><char-0x0301>	" CYRILLIC SMALL LETTER YA with COMBINING ACUTE ACCENT
+<A-C-char-0x0062>    <char-0x0438><char-0x0301>	" CYRILLIC SMALL LETTER I with COMBINING ACUTE ACCENT
+<A-C-char-0x002e>    <char-0x044e><char-0x0301>	" CYRILLIC SMALL LETTER YU with COMBINING ACUTE ACCENT
+
+"	The SHIFT and ALT and CTRL keys pressed
+<S-A-C-char-0x005a>    <char-0x042f><char-0x0301>   " CYRILLIC CAPITAL LETTER YA with COMBINING ACUTE ACCENT
+<S-A-C-char-0x0042>    <char-0x0418><char-0x0301>   " CYRILLIC CAPITAL LETTER I with COMBINING ACUTE ACCENT
+<S-A-C-char-0x003e>    <char-0x042e><char-0x0301>   " CYRILLIC CAPITAL LETTER Y with COMBINING ACUTE ACCENT
+
+
+"		VK_OEM_5 key (scan code 2b)
+
+"	None of the modifier keys are pressed
+<char-0x005c>	    <char-0x002f>	" SOLIDUS
+
+"	The SHIFT key is pressed
+<char-0x007c>	    <char-0x00a7>	" SECTION SIGN
+
+"	The ALT key is pressed
+<A-char-0x005c>	    <char-0x005c>	" REVERSE SOLIDUS
+
+"	The SHIFT and ALT keys pressed
 <A-char-0x007c>	    <char-0x007c>       " VERTICAL LINE
 
+
+"		SPACE BAR key
+
+"	The ALT key pressed
+<A-char-0x0020>	    <char-0x202f>	" NARROW NO-BREAK SPACE
+
+"	The SHIFT and CTRL keys pressed
+<S-C-char-0x0020>   <char-0x00A0>	" NO-BREAK SPACE
+
+"	    \///\\
+

runtime/macros/less.vim

@@ -1,6 +1,7 @@
 " Vim script to work like "less"
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2020 Dec 17
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Avoid loading this file twice, allow the user to define his own script.
 if exists("loaded_less")

runtime/makemenu.vim

@@ -1,8 +1,9 @@
 vim9script
 
 # Script to define the syntax menu in synmenu.vim
-# Maintainer:	Bram Moolenaar <Bram@vim.org>
-# Last Change:	2022 Jun 27
+# Maintainer:	The Vim Project <https://github.com/vim/vim>
+# Last Change:	2023 Aug 10
+# Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 # This is used by "make menu" in the src directory.
 edit <sfile>:p:h/synmenu.vim

runtime/menu.vim

@@ -1,8 +1,9 @@
 " Vim support file to define the default menus
 " You can also use this as a start for your own set of menus.
 "
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2023 May 03
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Note that ":an" (short for ":anoremenu") is often used to make a menu work
 " in all modes and avoid side effects from mappings defined by the user.

runtime/mswin.vim

@@ -1,7 +1,8 @@
 " Set options and add mapping such that Vim behaves a lot like MS-Windows
 "
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2018 Dec 07
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Bail out if this isn't wanted.
 if exists("g:skip_loading_mswin") && g:skip_loading_mswin

runtime/optwin.vim

@@ -1,7 +1,8 @@
 " These commands create the option window.
 "
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2022 Dec 16
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " If there already is an option window, jump to that one.
 let buf = bufnr('option-window')

runtime/pack/dist/opt/cfilter/plugin/cfilter.vim

@@ -1,7 +1,7 @@
 vim9script
 
 # cfilter.vim: Plugin to filter entries from a quickfix/location list
-# Last Change: Jun 30, 2022
+# Last Change: August 16, 2023
 # Maintainer: Yegappan Lakshmanan (yegappan AT yahoo DOT com)
 # Version: 2.0
 #
@@ -31,11 +31,11 @@ def Qf_filter(qf: bool, searchpat: string, bang: string)
   if qf
     Xgetlist = function('getqflist')
     Xsetlist = function('setqflist')
-    cmd = ':Cfilter' .. bang
+    cmd = $':Cfilter{bang}'
   else
     Xgetlist = function('getloclist', [0])
     Xsetlist = function('setloclist', [0])
-    cmd = ':Lfilter' .. bang
+    cmd = $':Lfilter{bang}'
   endif
 
   firstchar = searchpat[0]
@@ -62,7 +62,7 @@ def Qf_filter(qf: bool, searchpat: string, bang: string)
   endif
 
   items = filter(Xgetlist(), Cond)
-  title = cmd .. ' /' .. pat .. '/'
+  title = $'{cmd} /{pat}/'
   Xsetlist([], ' ', {title: title, items: items})
 enddef
 

runtime/pack/dist/opt/matchit/autoload/matchit.vim

@@ -1,6 +1,6 @@
 "  matchit.vim: (global plugin) Extended "%" matching
 "  autload script of matchit plugin, see ../plugin/matchit.vim
-"  Last Change: Jun 10, 2021
+"  Last Change: Jan 24, 2022
 
 " Neovim does not support scriptversion
 if has("vimscript-4")
@@ -42,6 +42,10 @@ function s:RestoreOptions()
     let restore_options = " ve=" .. &ve .. restore_options
     set ve=
   endif
+  if &smartcase
+    let restore_options = " smartcase " .. restore_options
+    set nosmartcase
+  endif
   return restore_options
 endfunction
 
@@ -134,9 +138,6 @@ function matchit#Match_wrapper(word, forward, mode) range
     let curcol = match(matchline, regexp)
     " If there is no match, give up.
     if curcol == -1
-      " Make sure macros abort properly
-      "exe "norm! \<esc>"
-      call feedkeys("\e", 'tni')
       return s:CleanUp(restore_options, a:mode, startpos)
     endif
     let endcol = matchend(matchline, regexp)
@@ -756,15 +757,15 @@ endfun
 fun! s:ParseSkip(str)
   let skip = a:str
   if skip[1] == ":"
-    if skip[0] == "s"
+    if skip[0] ==# "s"
       let skip = "synIDattr(synID(line('.'),col('.'),1),'name') =~? '" ..
         \ strpart(skip,2) .. "'"
-    elseif skip[0] == "S"
+    elseif skip[0] ==# "S"
       let skip = "synIDattr(synID(line('.'),col('.'),1),'name') !~? '" ..
         \ strpart(skip,2) .. "'"
-    elseif skip[0] == "r"
+    elseif skip[0] ==# "r"
       let skip = "strpart(getline('.'),0,col('.'))=~'" .. strpart(skip,2) .. "'"
-    elseif skip[0] == "R"
+    elseif skip[0] ==# "R"
       let skip = "strpart(getline('.'),0,col('.'))!~'" .. strpart(skip,2) .. "'"
     endif
   endif

runtime/pack/dist/opt/matchit/doc/matchit.txt

@@ -1,10 +1,10 @@
-*matchit.txt*	Extended "%" matching
+*matchit.txt*   Extended "%" matching
 
 For instructions on installing this file, type
 	`:help matchit-install`
 inside Vim.
 
-For Vim version 8.2.  Last change:  2021 Dec 24
+For Vim version 9.0.  Last change:  2023 June 28
 
 
 		  VIM REFERENCE MANUAL    by Benji Fisher et al
@@ -148,10 +148,6 @@ To use the matchit plugin add this line to your |vimrc|: >
 
 The script should start working the next time you start Vim.
 
-To use the matching plugin after startup, you can use this command (note the
-omitted '!'): >
-	packadd matchit
-
 To use the matchit plugin after Vim has started, execute this command: >
        packadd matchit
 
@@ -176,6 +172,22 @@ fail to skip matching groups in comments and strings.  If the |filetype|
 mechanism is turned off, the |b:match_words| variable will probably not be
 defined automatically.
 
+2.1 Temporarily disable the matchit plugin	*matchit-disable* *:MatchDisable*
+
+To temporarily reset the plugins, that are setup you can run the following
+command: >
+	:MatchDisable
+
+This will delete all the defined key mappings to the Vim default.
+Now the "%" command will work like before loading the plugin |%|
+
+2.2 Re-enable the matchit plugin		*:MatchEnable*
+
+To re-enable the plugin, after it was disabled, use the following command: >
+	:MatchEnable
+
+This will resetup the key mappings.
+
 ==============================================================================
 3. Configuration					*matchit-configure*
 
@@ -244,6 +256,9 @@ Examples:
 	comment character) you can >
 		:let b:match_skip = 'r:\(^\|[^\\]\)\(\\\\\)*%'
 <
+	See the $VIMRUNTIME/ftplugin/vim.vim for an example that uses both
+	syntax and a regular expression.
+
 ==============================================================================
 4. Supporting a New Language				*matchit-newlang*
 							*b:match_words*

runtime/pack/dist/opt/matchit/plugin/matchit.vim

@@ -1,7 +1,7 @@
 "  matchit.vim: (global plugin) Extended "%" matching
 "  Maintainer:  Christian Brabandt
-"  Version:     1.18
-"  Last Change: 2020 Dec 23
+"  Version:     1.19
+"  Last Change: 2023, June 28th
 "  Repository:  https://github.com/chrisbra/matchit
 "  Previous URL:http://www.vim.org/script.php?script_id=39
 "  Previous Maintainer:  Benji Fisher PhD   <benji@member.AMS.org>
@@ -46,44 +46,65 @@ let g:loaded_matchit = 1
 let s:save_cpo = &cpo
 set cpo&vim
 
-nnoremap <silent> <Plug>(MatchitNormalForward)     :<C-U>call matchit#Match_wrapper('',1,'n')<CR>
-nnoremap <silent> <Plug>(MatchitNormalBackward)    :<C-U>call matchit#Match_wrapper('',0,'n')<CR>
-xnoremap <silent> <Plug>(MatchitVisualForward)     :<C-U>call matchit#Match_wrapper('',1,'v')<CR>
-      \:if col("''") != col("$") \| exe ":normal! m'" \| endif<cr>gv``
-xnoremap <silent> <Plug>(MatchitVisualBackward)    :<C-U>call matchit#Match_wrapper('',0,'v')<CR>m'gv``
-onoremap <silent> <Plug>(MatchitOperationForward)  :<C-U>call matchit#Match_wrapper('',1,'o')<CR>
-onoremap <silent> <Plug>(MatchitOperationBackward) :<C-U>call matchit#Match_wrapper('',0,'o')<CR>
-
-" Analogues of [{ and ]} using matching patterns:
-nnoremap <silent> <Plug>(MatchitNormalMultiBackward)    :<C-U>call matchit#MultiMatch("bW", "n")<CR>
-nnoremap <silent> <Plug>(MatchitNormalMultiForward)     :<C-U>call matchit#MultiMatch("W",  "n")<CR>
-xnoremap <silent> <Plug>(MatchitVisualMultiBackward)    :<C-U>call matchit#MultiMatch("bW", "n")<CR>m'gv``
-xnoremap <silent> <Plug>(MatchitVisualMultiForward)     :<C-U>call matchit#MultiMatch("W",  "n")<CR>m'gv``
-onoremap <silent> <Plug>(MatchitOperationMultiBackward) :<C-U>call matchit#MultiMatch("bW", "o")<CR>
-onoremap <silent> <Plug>(MatchitOperationMultiForward)  :<C-U>call matchit#MultiMatch("W",  "o")<CR>
-
-" text object:
-xmap <silent> <Plug>(MatchitVisualTextObject) <Plug>(MatchitVisualMultiBackward)o<Plug>(MatchitVisualMultiForward)
-
-if !exists("g:no_plugin_maps")
-  nmap <silent> %  <Plug>(MatchitNormalForward)
-  nmap <silent> g% <Plug>(MatchitNormalBackward)
-  xmap <silent> %  <Plug>(MatchitVisualForward)
-  xmap <silent> g% <Plug>(MatchitVisualBackward)
-  omap <silent> %  <Plug>(MatchitOperationForward)
-  omap <silent> g% <Plug>(MatchitOperationBackward)
+fun MatchEnable()
+  nnoremap <silent> <Plug>(MatchitNormalForward)     :<C-U>call matchit#Match_wrapper('',1,'n')<CR>
+  nnoremap <silent> <Plug>(MatchitNormalBackward)    :<C-U>call matchit#Match_wrapper('',0,'n')<CR>
+  xnoremap <silent> <Plug>(MatchitVisualForward)     :<C-U>call matchit#Match_wrapper('',1,'v')<CR>
+        \:if col("''") != col("$") \| exe ":normal! m'" \| endif<cr>gv``
+  xnoremap <silent> <Plug>(MatchitVisualBackward)    :<C-U>call matchit#Match_wrapper('',0,'v')<CR>m'gv``
+  onoremap <silent> <Plug>(MatchitOperationForward)  :<C-U>call matchit#Match_wrapper('',1,'o')<CR>
+  onoremap <silent> <Plug>(MatchitOperationBackward) :<C-U>call matchit#Match_wrapper('',0,'o')<CR>
 
   " Analogues of [{ and ]} using matching patterns:
-  nmap <silent> [% <Plug>(MatchitNormalMultiBackward)
-  nmap <silent> ]% <Plug>(MatchitNormalMultiForward)
-  xmap <silent> [% <Plug>(MatchitVisualMultiBackward)
-  xmap <silent> ]% <Plug>(MatchitVisualMultiForward)
-  omap <silent> [% <Plug>(MatchitOperationMultiBackward)
-  omap <silent> ]% <Plug>(MatchitOperationMultiForward)
+  nnoremap <silent> <Plug>(MatchitNormalMultiBackward)    :<C-U>call matchit#MultiMatch("bW", "n")<CR>
+  nnoremap <silent> <Plug>(MatchitNormalMultiForward)     :<C-U>call matchit#MultiMatch("W",  "n")<CR>
+  xnoremap <silent> <Plug>(MatchitVisualMultiBackward)    :<C-U>call matchit#MultiMatch("bW", "n")<CR>m'gv``
+  xnoremap <silent> <Plug>(MatchitVisualMultiForward)     :<C-U>call matchit#MultiMatch("W",  "n")<CR>m'gv``
+  onoremap <silent> <Plug>(MatchitOperationMultiBackward) :<C-U>call matchit#MultiMatch("bW", "o")<CR>
+  onoremap <silent> <Plug>(MatchitOperationMultiForward)  :<C-U>call matchit#MultiMatch("W",  "o")<CR>
 
-  " Text object
-  xmap a% <Plug>(MatchitVisualTextObject)
-endif
+  " text object:
+  xmap <silent> <Plug>(MatchitVisualTextObject) <Plug>(MatchitVisualMultiBackward)o<Plug>(MatchitVisualMultiForward)
+
+  if !exists("g:no_plugin_maps")
+    nmap <silent> %  <Plug>(MatchitNormalForward)
+    nmap <silent> g% <Plug>(MatchitNormalBackward)
+    xmap <silent> %  <Plug>(MatchitVisualForward)
+    xmap <silent> g% <Plug>(MatchitVisualBackward)
+    omap <silent> %  <Plug>(MatchitOperationForward)
+    omap <silent> g% <Plug>(MatchitOperationBackward)
+
+    " Analogues of [{ and ]} using matching patterns:
+    nmap <silent> [% <Plug>(MatchitNormalMultiBackward)
+    nmap <silent> ]% <Plug>(MatchitNormalMultiForward)
+    xmap <silent> [% <Plug>(MatchitVisualMultiBackward)
+    xmap <silent> ]% <Plug>(MatchitVisualMultiForward)
+    omap <silent> [% <Plug>(MatchitOperationMultiBackward)
+    omap <silent> ]% <Plug>(MatchitOperationMultiForward)
+
+    " Text object
+    xmap a% <Plug>(MatchitVisualTextObject)
+  endif
+endfun
+
+fun MatchDisable()
+  " remove all the setup keymappings
+  nunmap %
+  nunmap g%
+  xunmap %
+  xunmap g%
+  ounmap %
+  ounmap g%
+
+  nunmap [%
+  nunmap ]%
+  xunmap [%
+  xunmap ]%
+  ounmap [%
+  ounmap ]%
+
+  xunmap a%
+endfun
 
 " Call this function to turn on debugging information.  Every time the main
 " script is run, buffer variables will be saved.  These can be used directly
@@ -91,6 +112,14 @@ endif
 if !exists(":MatchDebug")
   command! -nargs=0 MatchDebug call matchit#Match_debug()
 endif
+if !exists(":MatchDisable")
+  command! -nargs=0 MatchDisable :call MatchDisable()
+endif
+if !exists(":MatchEnable")
+  command! -nargs=0 MatchEnable :call MatchEnable()
+endif
+
+call MatchEnable()
 
 let &cpo = s:save_cpo
 unlet s:save_cpo

runtime/pack/dist/opt/termdebug/plugin/termdebug.vim

@@ -1401,9 +1401,19 @@ func s:CreateBreakpoint(id, subid, enabled)
     else
       let hiName = "debugBreakpoint"
     endif
+    let label = ''
+    if exists('g:termdebug_config')
+      let label = get(g:termdebug_config, 'sign', '')
+    endif
+    if label == ''
+      let label = substitute(nr, '\..*', '', '')
+      if strlen(label) > 2
+	let label = strpart(label, strlen(label) - 2)
+      endif
+    endif
     call sign_define('debugBreakpoint' .. nr,
-			    \ #{text: substitute(nr, '\..*', '', ''),
-			    \ texthl: hiName})
+				\ #{text: strpart(label, 0, 2), 
+				\ texthl: hiName})
   endif
 endfunc
 

runtime/plugin/gzip.vim

@@ -1,6 +1,7 @@
 " Vim plugin for editing compressed files.
-" Maintainer: Bram Moolenaar <Bram@vim.org>
-" Last Change: 2016 Oct 30
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Exit quickly when:
 " - this plugin was already loaded

runtime/plugin/manpager.vim

@@ -30,10 +30,10 @@ function s:ManPager()
   setlocal modifiable
 
   " Emulate 'col -b'
-  silent! keepj keepp %s/\v(.)\b\ze\1?//ge
+  exe 'silent! keepj keepp %s/\v(.)\b\ze\1?//e' .. (&gdefault ? '' : 'g')
 
   " Remove ansi sequences
-  silent! keepj keepp %s/\v\e\[%(%(\d;)?\d{1,2})?[mK]//ge
+  exe 'silent! keepj keepp %s/\v\e\[%(%(\d;)?\d{1,2})?[mK]//e' .. (&gdefault ? '' : 'g')
 
   " Remove empty lines above the header
   call cursor(1, 1)

runtime/plugin/matchparen.vim

@@ -1,6 +1,7 @@
 " Vim plugin for showing matching parens
-" Maintainer:  Bram Moolenaar <Bram@vim.org>
-" Last Change: 2022 Dec 01
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Exit quickly when:
 " - this plugin was already loaded (or disabled)

runtime/plugin/spellfile.vim

@@ -1,6 +1,7 @@
 " Vim plugin for downloading spell files
-" Maintainer:  Bram Moolenaar <Bram@vim.org>
-" Last Change: 2006 Feb 01
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Exit quickly when:
 " - this plugin was already loaded

runtime/scripts.vim

@@ -1,7 +1,8 @@
 " Vim support file to detect file types in scripts
 "
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last change:	2023 Jun 08
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " This file is called by an autocommand for every file that has just been
 " loaded into a buffer.  It checks if the type of file can be recognized by

runtime/synmenu.vim

@@ -1,8 +1,9 @@
 " Vim support file to define the syntax selection menu
 " This file is normally sourced from menu.vim.
 "
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2022 Oct 04
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Define the SetSyn function, used for the Syntax menu entries.
 " Set 'filetype' and also 'syntax' if it is manually selected.

runtime/syntax/README.txt

@@ -28,14 +28,16 @@ whitespace.vim  View Tabs and Spaces.
 If you want to write a syntax file, read the docs at ":help usr_44.txt".
 
 If you make a new syntax file which would be useful for others, please send it
-to Bram@vim.org.  Include instructions for detecting the file type for this
-language, by file name extension or by checking a few lines in the file.
-And please write the file in a portable way, see ":help 44.12".
+to the vim-dev mailing list <vim-dev@vim.org>.  Include instructions for
+detecting the file type for this language, by file name extension or by
+checking a few lines in the file. And please write the file in a portable way,
+see ":help 44.12".
 
 If you have remarks about an existing file, send them to the maintainer of
-that file.  Only when you get no response send a message to Bram@vim.org.
+that file.  Only when you get no response send a message to the vim-dev
+mailing list: <vim-dev@vim.org>.
 
 If you are the maintainer of a syntax file and make improvements, send the new
-version to Bram@vim.org.
+version to the vim-dev mailing list: <vim-dev@vim.org>
 
 For further info see ":help syntax" in Vim.

runtime/syntax/aap.vim

@@ -1,7 +1,8 @@
 " Vim syntax file
 " Language:	A-A-P recipe
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2004 Jun 13
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Quit when a syntax file was already loaded
 if exists("b:current_syntax")

runtime/syntax/bindzone.vim

@@ -33,7 +33,7 @@ syn match       zoneDomain      contained  /[^[:space:]!"#$%&'()*+,\/:;<=>?@[\]\
 syn match       zoneSpecial     contained /^[@*.]\s/
 syn match       zoneTTL         contained /\s\@<=\d[0-9WwDdHhMmSs]*\(\s\|$\)\@=/ nextgroup=zoneClass,zoneRRType skipwhite
 syn keyword     zoneClass       contained IN CHAOS CH HS HESIOD nextgroup=zoneRRType,zoneTTL skipwhite
-syn keyword     zoneRRType      contained A AAAA CERT CNAME DNAME DNSKEY DS HINFO LOC MX NAPTR NS NSEC NSEC3 NSEC3PARAM PTR RP RRSIG SSHFP SOA SPF SRV TLSA TXT nextgroup=zoneRData skipwhite
+syn keyword     zoneRRType      contained A AAAA CAA CERT CNAME DNAME DNSKEY DS HINFO LOC MX NAPTR NS NSEC NSEC3 NSEC3PARAM OPENPGPKEY PTR RP RRSIG SMIMEA SOA SPF SRV SSHFP TLSA TXT nextgroup=zoneRData skipwhite
 syn match       zoneRData       contained /[^;]*/ contains=zoneDomain,zoneIPAddr,zoneIP6Addr,zoneText,zoneNumber,zoneParen,zoneUnknown
 
 syn match       zoneIPAddr      contained /\<[0-9]\{1,3}\(\.[0-9]\{1,3}\)\{,3}\>/

runtime/syntax/c.vim

@@ -1,7 +1,8 @@
 " Vim syntax file
 " Language:	C
-" Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2023 Mar 08
+" Maintainer:	The Vim Project <https://github.com/vim/vim>
+" Last Change:	2023 Aug 10
+" Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Quit when a (custom) syntax file was already loaded
 if exists("b:current_syntax")