patch 9.1.0197: Vim9: problem evaluating negated boolean logic

Problem:  Vim9: problem evaluating negated boolean logic
          (lxhillwind)
Solution: Don't clear the first value on short circuit evaluation
          (Yegappan Lakshmanan)

fixes: #14265
closes: #14269

Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>

.github/CODEOWNERS

@@ -9,20 +9,15 @@
 # So if a pull request only touches javascript files, only these owners
 # will be requested to review.
 
+nsis/lang/russian.nsi			@RestorerZ
 runtime/autoload/freebasic.vim		@dkearns
-runtime/autoload/getscript.vim		@cecamp
 runtime/autoload/haskell.vim		@alx741
 runtime/autoload/javascript.vim		@jsit
-runtime/autoload/netrw.vim		@cecamp
-runtime/autoload/netrwFileHandlers.vim	@cecamp
-runtime/autoload/netrwSettings.vim	@cecamp
+runtime/autoload/modula2.vim		@dkearns
 runtime/autoload/php.vim		@david-szabo97
 runtime/autoload/rubycomplete.vim	@segfault @dkearns
 runtime/autoload/rust.vim		@lilyball
-runtime/autoload/tar.vim		@cecamp
-runtime/autoload/vimball.vim		@cecamp
 runtime/autoload/xmlformat.vim		@chrisbra
-runtime/autoload/zip.vim		@cecamp
 runtime/autoload/dist/json.vim		@habamax
 runtime/colors/blue.vim			@habamax @romainl @neutaaaaan
 runtime/colors/darkblue.vim		@habamax @romainl @neutaaaaan
@@ -65,6 +60,7 @@ runtime/compiler/eruby.vim		@dkearns
 runtime/compiler/fbc.vim		@dkearns
 runtime/compiler/gawk.vim		@dkearns
 runtime/compiler/gjs.vim		@dkearns
+runtime/compiler/gm2.vim		@dkearns
 runtime/compiler/go.vim			@dbarnett
 runtime/compiler/haml.vim		@tpope
 runtime/compiler/hare.vim		@rsaihe
@@ -106,12 +102,6 @@ runtime/compiler/xmllint.vim		@dkearns
 runtime/compiler/xo.vim			@dkearns
 runtime/compiler/yamllint.vim		@romainl
 runtime/compiler/zsh.vim		@dkearns
-runtime/doc/pi_getscript.txt		@cecamp
-runtime/doc/pi_logipat.txt		@cecamp
-runtime/doc/pi_netrw.txt		@cecamp
-runtime/doc/pi_tar.txt			@cecamp
-runtime/doc/pi_vimball.txt		@cecamp
-runtime/doc/pi_zip.txt			@cecamp
 runtime/doc/ps1.txt			@heaths
 runtime/ftplugin/abaqus.vim		@costerwi
 runtime/ftplugin/apache.vim		@dubgeiser 
@@ -125,6 +115,7 @@ runtime/ftplugin/cs.vim			@nickspoons
 runtime/ftplugin/csh.vim		@dkearns
 runtime/ftplugin/css.vim		@dkearns
 runtime/ftplugin/cucumber.vim		@tpope
+runtime/ftplugin/deb822sources.vim	@jamessan
 runtime/ftplugin/debchangelog.vim	@jamessan
 runtime/ftplugin/debcontrol.vim		@jamessan
 runtime/ftplugin/debsources.vim		@jamessan
@@ -180,8 +171,8 @@ runtime/ftplugin/lynx.vim		@dkearns
 runtime/ftplugin/m3build.vim		@dkearns
 runtime/ftplugin/m3quake.vim		@dkearns
 runtime/ftplugin/markdown.vim		@tpope
-runtime/ftplugin/matlab.vim		@cecamp
 runtime/ftplugin/meson.vim		@Liambeguin
+runtime/ftplugin/modula2.vim		@dkearns
 runtime/ftplugin/modula3.vim		@dkearns
 runtime/ftplugin/nginx.vim		@chr4
 runtime/ftplugin/nroff.vim		@a-vrma
@@ -202,14 +193,9 @@ runtime/ftplugin/pymanifest.vim		@ObserverOfTime
 runtime/ftplugin/python.vim		@tpict
 runtime/ftplugin/qb64.vim		@dkearns
 runtime/ftplugin/qml.vim		@ChaseKnowlden
-runtime/ftplugin/r.vim			@jalvesaq
 runtime/ftplugin/racket.vim		@benknoble
 runtime/ftplugin/readline.vim		@dkearns
-runtime/ftplugin/rhelp.vim		@jalvesaq
-runtime/ftplugin/rmd.vim		@jalvesaq
-runtime/ftplugin/rnoweb.vim		@jalvesaq
 runtime/ftplugin/routeros.vim		@zainin
-runtime/ftplugin/rrst.vim		@jalvesaq
 runtime/ftplugin/rst.vim		@marshallward
 runtime/ftplugin/ruby.vim		@tpope @dkearns
 runtime/ftplugin/rust.vim		@lilyball
@@ -299,14 +285,9 @@ runtime/indent/prolog.vim		@dkearns
 runtime/indent/ps1.vim			@heaths
 runtime/indent/qb64.vim			@dkearns
 runtime/indent/qml.vim			@ChaseKnowlden
-runtime/indent/r.vim			@jalvesaq
 runtime/indent/racket.vim		@benknoble
 runtime/indent/rapid.vim		@KnoP-01
 runtime/indent/readline.vim		@dkearns
-runtime/indent/rhelp.vim		@jalvesaq
-runtime/indent/rmd.vim			@jalvesaq
-runtime/indent/rnoweb.vim		@jalvesaq
-runtime/indent/rrst.vim			@jalvesaq
 runtime/indent/ruby.vim			@AndrewRadev @dkearns
 runtime/indent/sass.vim			@tpope
 runtime/indent/scala.vim		@derekwyatt
@@ -324,21 +305,19 @@ runtime/indent/xml.vim			@chrisbra
 runtime/indent/zsh.vim			@chrisbra
 runtime/keymap/armenian-eastern_utf-8.vim	@blinskey
 runtime/keymap/armenian-western_utf-8.vim	@blinskey
+runtime/keymap/russian-typograph.vim	@RestorerZ
 runtime/keymap/tamil_tscii.vim		@yegappan
 runtime/lang/menu_en_gb.latin1.vim	@mrdubya
+runtime/lang/menu_ru_ru.cp1251.vim	@RestorerZ
+runtime/lang/menu_ru_ru.koi8-r.vim	@RestorerZ
+runtime/lang/menu_ru_ru.utf-8.vim	@RestorerZ
 runtime/pack/dist/opt/cfilter/plugin/cfilter.vim	@yegappan
 runtime/pack/dist/opt/matchit/		@chrisbra
-runtime/plugin/getscriptPlugin.vim	@cecamp
-runtime/plugin/logiPat.vim		@cecamp
-runtime/plugin/netrwPlugin.vim		@cecamp
-runtime/plugin/tarPlugin.vim		@cecamp
-runtime/plugin/vimballPlugin.vim	@cecamp
-runtime/plugin/zipPlugin.vim		@cecamp
 runtime/plugin/manpager.vim		@Konfekt
 runtime/syntax/shared/hgcommitDiff.vim	@vegerot
 runtime/syntax/abaqus.vim		@costerwi
 runtime/syntax/aidl.vim			@dpelle
-runtime/syntax/amiga.vim		@cecamp
+runtime/syntax/ant.vim			@dkearns
 runtime/syntax/arduino.vim		@johshoff
 runtime/syntax/asciidoc.vim		@aerostitch
 runtime/syntax/asm.vim			@dkearns
@@ -355,14 +334,13 @@ runtime/syntax/cabalconfig.vim		@coot
 runtime/syntax/cabalproject.vim		@coot
 runtime/syntax/cf.vim			@ernstvanderlinden
 runtime/syntax/chatito.vim		@ObserverOfTime
+runtime/syntax/chuck.vim		@gacallea
 runtime/syntax/clojure.vim		@axvr
 runtime/syntax/cs.vim			@nickspoons
-runtime/syntax/csh.vim			@cecamp
 runtime/syntax/cucumber.vim		@tpope
 runtime/syntax/d.vim			@JesseKPhillips
 runtime/syntax/dart.vim			@pr3d4t0r
 runtime/syntax/datascript.vim		@dpelle
-runtime/syntax/dcl.vim			@cecamp
 runtime/syntax/deb822sources.vim	@jamessan
 runtime/syntax/debchangelog.vim		@jamessan
 runtime/syntax/debcontrol.vim		@jamessan
@@ -378,11 +356,9 @@ runtime/syntax/dtd.vim			@chrisbra
 runtime/syntax/dts.vim			@zonque
 runtime/syntax/editorconfig.vim		@gpanders
 runtime/syntax/eiffel.vim		@jocelyn
-runtime/syntax/elmfilt.vim		@cecamp
 runtime/syntax/erlang.vim		@hcs42
 runtime/syntax/eruby.vim		@tpope @dkearns
 runtime/syntax/expect.vim		@dkearns
-runtime/syntax/exports.vim		@cecamp
 runtime/syntax/falcon.vim		@steveno
 runtime/syntax/fennel.vim		@gpanders
 runtime/syntax/fetchmail.vim		@dkearns
@@ -409,6 +385,7 @@ runtime/syntax/gyp.vim			@ObserverOfTime
 runtime/syntax/haml.vim			@tpope
 runtime/syntax/hare.vim			@rsaihe
 runtime/syntax/haskell.vim		@coot
+runtime/syntax/help_ru.vim		@RestorerZ
 runtime/syntax/hgcommit.vim		@k-takata
 runtime/syntax/hitest.vim		@lacygoill
 runtime/syntax/hog.vim			@wtfbbqhax
@@ -427,9 +404,7 @@ runtime/syntax/kconfig.vim		@chrisbra
 runtime/syntax/kotlin.vim		@udalov
 runtime/syntax/krl.vim			@KnoP-01
 runtime/syntax/less.vim			@genoma
-runtime/syntax/lex.vim			@cecamp
 runtime/syntax/liquid.vim		@tpope
-runtime/syntax/lisp.vim			@cecamp
 runtime/syntax/lua.vim			@marcuscf
 runtime/syntax/lyrics.vim		@ObserverOfTime
 runtime/syntax/lynx.vim			@dkearns
@@ -438,13 +413,15 @@ runtime/syntax/m3quake.vim		@dkearns
 runtime/syntax/mailcap.vim		@dkearns
 runtime/syntax/make.vim			@rohieb
 runtime/syntax/mallard.vim		@jhradilek
-runtime/syntax/maple.vim		@cecamp
 runtime/syntax/markdown.vim		@tpope
 runtime/syntax/mason.vim		@petdance
 runtime/syntax/meson.vim		@Liambeguin
+runtime/syntax/modula2.vim		@dkearns
+runtime/syntax/modula2/opt/iso.vim	@trijezdci
+runtime/syntax/modula2/opt/pim.vim	@trijezdci
+runtime/syntax/modula2/opt/r10.vim	@trijezdci
 runtime/syntax/modula3.vim		@dkearns
 runtime/syntax/n1ql.vim			@pr3d4t0r
-runtime/syntax/netrw.vim		@cecamp
 runtime/syntax/nginx.vim		@chr4
 runtime/syntax/ninja.vim		@nico
 runtime/syntax/nix.vim			@equill
@@ -469,7 +446,6 @@ runtime/syntax/psl.vim			@danielkho
 runtime/syntax/pymanifest.vim		@ObserverOfTime
 runtime/syntax/qb64.vim			@dkearns
 runtime/syntax/qml.vim			@ChaseKnowlden
-runtime/syntax/r.vim			@jalvesaq
 runtime/syntax/racket.vim		@benknoble
 runtime/syntax/raml.vim			@in3d
 runtime/syntax/rapid.vim		@KnoP-01
@@ -479,11 +455,8 @@ runtime/syntax/rcs.vim			@hdima
 runtime/syntax/rebol.vim		@mrdubya
 runtime/syntax/rego.vim			@zenmatic
 runtime/syntax/resolv.vim		@rid9
-runtime/syntax/rmd.vim			@jalvesaq
 runtime/syntax/rng.vim			@jhradilek
 runtime/syntax/routeros.vim		@zainin
-runtime/syntax/rpcgen.vim		@cecamp
-runtime/syntax/rrst.vim			@jalvesaq
 runtime/syntax/rst.vim			@marshallward
 runtime/syntax/ruby.vim			@dkearns
 runtime/syntax/sass.vim			@tpope
@@ -491,9 +464,7 @@ runtime/syntax/scala.vim		@derekwyatt
 runtime/syntax/scss.vim			@tpope
 runtime/syntax/sdoc.vim			@gpanders
 runtime/syntax/sed.vim			@dkearns
-runtime/syntax/sh.vim			@cecamp
 runtime/syntax/shared/debversions.vim	@jamessan
-runtime/syntax/sm.vim			@cecamp
 runtime/syntax/solidity.vim		@cothi
 runtime/syntax/spec.vim			@ignatenkobrain
 runtime/syntax/sqloracle.vim		@chrisbra
@@ -507,11 +478,9 @@ runtime/syntax/svn.vim			@hdima
 runtime/syntax/swayconfig.vim		@jamespeapen
 runtime/syntax/swig.vim			@jmarrec
 runtime/syntax/systemverilog.vim	@Kocha
-runtime/syntax/tags.vim			@cecamp
 runtime/syntax/tap.vim			@petdance
 runtime/syntax/tcsh.vim			@dkearns
 runtime/syntax/teraterm.vim		@k-takata
-runtime/syntax/tex.vim			@cecamp
 runtime/syntax/tidy.vim			@dkearns
 runtime/syntax/tmux.vim			@ericpruitt
 runtime/syntax/toml.vim			@averms
@@ -523,7 +492,6 @@ runtime/syntax/typescriptcommon.vim	@HerringtonDarkholme
 runtime/syntax/typescriptreact.vim	@HerringtonDarkholme
 runtime/syntax/unison.vim		@chuwy
 runtime/syntax/vdf.vim			@ObserverOfTime
-runtime/syntax/vim.vim			@cecamp
 runtime/syntax/vroom.vim		@dbarnett
 runtime/syntax/wast.vim			@rhysd
 runtime/syntax/wdl.vim			@zenmatic
@@ -531,18 +499,18 @@ runtime/syntax/wget.vim			@dkearns
 runtime/syntax/wget2.vim		@dkearns
 runtime/syntax/xbl.vim			@dkearns
 runtime/syntax/xcompose.vim		@ObserverOfTime
-runtime/syntax/xmath.vim		@cecamp
 runtime/syntax/xml.vim			@chrisbra
 runtime/syntax/xs.vim			@petdance
 runtime/syntax/xslt.vim			@Boobies
-runtime/syntax/xxd.vim			@cecamp
-runtime/syntax/yacc.vim			@cecamp
 runtime/syntax/zserio.vim		@dpelle
 runtime/syntax/zsh.vim			@chrisbra
 runtime/tutor/tutor.eo			@dpelle
 runtime/tutor/tutor.eo.utf-8		@dpelle
 runtime/tutor/tutor.fr			@dpelle
 runtime/tutor/tutor.fr.utf-8		@dpelle
+runtime/tutor/tutor.ru			@RestorerZ
+runtime/tutor/tutor.ru.cp1251		@RestorerZ
+runtime/tutor/tutor.ru.utf-8		@RestorerZ
 src/iscygpty.*				@k-takata
 src/libvterm/				@leonerd
 src/po/ca.po				@nfdisco
@@ -554,6 +522,7 @@ src/po/fr.po				@dpelle
 src/po/ga.po				@kscanne
 src/po/it.po				@azc100
 src/po/ja.po				@k-takata
+src/po/ru.po				@RestorerZ
 src/po/sr.po				@eevan78
 src/po/tr.po				@bitigchi
 src/po/uk.po				@sakhnik

.github/workflows/ci.yml

@@ -22,7 +22,7 @@ jobs:
     env:
       CC: ${{ matrix.compiler }}
       GCC_VER: 13
-      CLANG_VER: 17
+      CLANG_VER: 18
       TEST: test
       SRCDIR: ./src
       LEAK_CFLAGS: -DEXITFREE
@@ -90,6 +90,10 @@ jobs:
       - run: sudo dpkg --add-architecture i386
         if: matrix.architecture == 'i386'
 
+      - name: Uninstall snap
+        run: |
+          sudo bash ci/remove_snap.sh
+
       - name: Install packages
         run: |
           PKGS=( \
@@ -265,7 +269,13 @@ jobs:
         if: contains(matrix.extra, 'vimtags')
         run: |
           # This will exit with an error code if the generated vim tags differs from source.
-          git diff --exit-code -- runtime/doc/tags
+          (
+            cd runtime/doc
+            git diff --exit-code -- tags
+            make html; rm *.html tags.ref;
+            test -f errors.log && exit 3;
+            true
+          )
 
       - name: Generate gcov files
         if: matrix.coverage
@@ -276,9 +286,10 @@ jobs:
       - name: Codecov
         timeout-minutes: 20
         if: matrix.coverage
-        uses: codecov/codecov-action@v3
+        uses: codecov/codecov-action@v4
         with:
           flags: linux,${{ matrix.features }}-${{ matrix.compiler }}-${{ matrix.extra }}
+          token: ${{ secrets.CODECOV_TOKEN }}
 
       - name: ASan logs
         if: contains(matrix.extra, 'asan') && !cancelled()
@@ -289,7 +300,7 @@ jobs:
           done
 
   macos:
-    runs-on: macos-latest
+    runs-on: ${{ matrix.runner }}
 
     env:
       CC: clang
@@ -302,6 +313,7 @@ jobs:
       fail-fast: false
       matrix:
         features: [tiny, normal, huge]
+        runner: [macos-latest, macos-14]
 
     steps:
       - name: Checkout repository from github
@@ -310,8 +322,14 @@ jobs:
       - name: Install packages
         if: matrix.features == 'huge'
         run: |
-          brew install lua
-          echo "LUA_PREFIX=/usr/local" >> $GITHUB_ENV
+          brew install lua libtool
+          echo "LUA_PREFIX=$(brew --prefix)" >> $GITHUB_ENV
+
+      - name: Grant microphone access for macos-14
+        if: matrix.runner == 'macos-14'
+        run: |
+          # Temporary fix to fix microphone permission issues for macos-14 when playing sound.
+          sqlite3 $HOME/Library/Application\ Support/com.apple.TCC/TCC.db "INSERT OR IGNORE INTO access VALUES ('kTCCServiceMicrophone','/usr/local/opt/runner/provisioner/provisioner',1,2,4,1,NULL,NULL,0,'UNUSED',NULL,0,1687786159,NULL,NULL,'UNUSED',1687786159);"
 
       - name: Set up environment
         run: |
@@ -355,6 +373,11 @@ jobs:
           "${SRCDIR}"/vim -u NONE -i NONE --not-a-term -esNX -V1 -S ci/if_ver-1.vim -c quit
           "${SRCDIR}"/vim -u NONE -i NONE --not-a-term -esNX -V1 -S ci/if_ver-2.vim -c quit
 
+      - name: Install packages for testing
+        run: |
+          # Apple diff is broken. Use GNU diff instead. See #14032.
+          brew install diffutils
+
       - name: Test
         timeout-minutes: 20
         run: |
@@ -385,11 +408,11 @@ jobs:
       # winpty
       WINPTY_URL: https://github.com/rprichard/winpty/releases/download/0.4.3/winpty-0.4.3-msvc2015.zip
       # libsodium
-      SODIUM_VER: '1.0.18'
+      SODIUM_VER: '1.0.19'
       SODIUM_MSVC_URL: https://download.libsodium.org/libsodium/releases/libsodium-%SODIUM_VER%-stable-msvc.zip
       SODIUM_MSVC_VER: v143
       SODIUM_MINGW_URL: https://download.libsodium.org/libsodium/releases/libsodium-%SODIUM_VER%-stable-mingw.tar.gz
-      SODIUM_MINGW_VER: 23
+      SODIUM_MINGW_VER: 26
       # Escape sequences
       COL_RED: "\x1b[31m"
       COL_GREEN: "\x1b[32m"
@@ -451,7 +474,10 @@ jobs:
             echo "SODIUM_LIB=${SODIUM_DIR}\\${{ matrix.arch == 'x64' && 'x64' || 'Win32' }}\\Release\\${SODIUM_MSVC_VER}\\dynamic" >> $GITHUB_ENV
           else
             SODIUM_DIR=D:\\libsodium-win${{ matrix.arch == 'x64' && '64' || '32' }}
+            # do not want \L to end up in pathdef.c and compiler complaining about unknown escape sequences \l
+            SODIUM_DIR_SLASH=D:/libsodium-win${{ matrix.arch == 'x64' && '64' || '32' }}
             echo "SODIUM_LIB=${SODIUM_DIR}\\bin" >> $GITHUB_ENV
+            echo "SODIUM_DIR_SLASH=${SODIUM_DIR_SLASH}" >> $GITHUB_ENV
           fi
           echo "SODIUM_DIR=${SODIUM_DIR}" >> $GITHUB_ENV
 
@@ -477,7 +503,7 @@ jobs:
           echo %SODIUM_VER%>> urls.txt
 
       - name: Cache downloaded files
-        uses: actions/cache@v3
+        uses: actions/cache@v4
         with:
           path: downloads
           key: ${{ runner.os }}-${{ matrix.arch }}-${{ hashFiles('urls.txt') }}
@@ -575,7 +601,7 @@ jobs:
               DYNAMIC_PYTHON=yes PYTHON=${PYTHON_DIR} \
               DYNAMIC_PYTHON3=yes PYTHON3=${PYTHON3_DIR} \
               DYNAMIC_PYTHON3_STABLE_ABI=${PYTHON3_STABLE} \
-              DYNAMIC_SODIUM=yes SODIUM=${SODIUM_DIR} \
+              DYNAMIC_SODIUM=yes SODIUM=${SODIUM_DIR_SLASH} \
               STATIC_STDCPLUS=yes COVERAGE=${{ matrix.coverage }}
           else
             mingw32-make -f Make_ming.mak -j2 \
@@ -660,7 +686,8 @@ jobs:
       - name: Codecov
         timeout-minutes: 20
         if: matrix.coverage
-        uses: codecov/codecov-action@v3
+        uses: codecov/codecov-action@v4
         with:
           directory: src
           flags: windows,${{ matrix.toolchain }}-${{ matrix.arch }}-${{ matrix.features }}
+          token: ${{ secrets.CODECOV_TOKEN }}

.gitignore

@@ -97,6 +97,11 @@ src/kword_test
 # Generated by "make install"
 runtime/doc/doctags
 
+# Temporarily generated by "runtime/syntax/generator/make"
+runtime/syntax/generator/generator.err
+runtime/syntax/generator/sanity_check.err
+runtime/syntax/generator/vim.vim.rc
+
 # Generated by "make shadow".  The directory names could be anything but we
 # restrict them to shadow (the default) or shadow-*
 src/shadow

Filelist

@@ -1,7 +1,7 @@
 # List of distributed Vim files.
 # Used by Makefile.
 
-# source files for all source archives
+# Source files for all source archives.
 SRC_ALL =	\
 		.cirrus.yml \
 		.gitattributes \
@@ -20,6 +20,7 @@ SRC_ALL =	\
 		ci/config.mk*.sed \
 		ci/if_ver*.vim \
 		ci/setup-xvfb.sh \
+		ci/remove_snap.sh \
 		src/Make_all.mak \
 		src/README.md \
 		src/alloc.c \
@@ -429,7 +430,7 @@ SRC_ALL =	\
 		src/xdiff/xutils.h \
 
 
-# source files for Unix only
+# Source files for Unix-like only.
 SRC_UNIX =	\
 		Makefile \
 		Filelist \
@@ -495,7 +496,7 @@ SRC_UNIX =	\
 		src/which.sh \
 		src/xxd/Makefile \
 
-# source files for both DOS and Unix
+# Source files for both MS Windows and Unix-like.
 SRC_DOS_UNIX =	\
 		src/gui_xim.c \
 		src/if_cscope.c \
@@ -521,7 +522,7 @@ SRC_DOS_UNIX =	\
 		src/proto/if_tcl.pro \
 		src/typemap \
 
-# source files for MS-Windows (also in the extra archive)
+# Source files for MS Windows (also in the extra archive).
 SRC_DOS =	\
 		src/GvimExt/*.mak \
 		src/GvimExt/GvimExt.reg \
@@ -597,7 +598,7 @@ SRC_DOS =	\
 		nsis/lang/*.nsi \
 		uninstall.txt \
 
-# source files for DOS without CR/LF translation (also in the extra archive)
+# Source files for MS Windows without CR/LF translation (also in the extra archive).
 SRC_DOS_BIN =	\
 		src/tearoff.bmp \
 		src/tools.bmp \
@@ -614,10 +615,10 @@ SRC_DOS_BIN =	\
 		runtime/bitmaps/vim.ico \
 		nsis/icons.zip \
 
-# source files for Amiga, DOS, etc. (also in the extra archive)
+# Source files for Amiga, DOS, etc. (also in the extra archive).
 SRC_AMI_DOS =	\
 
-# source files for Amiga (also in the extra archive)
+# Source files for Amiga (also in the extra archive).
 SRC_AMI =	\
 		README_amisrc.txt \
 		README_amisrc.txt.info \
@@ -631,7 +632,7 @@ SRC_AMI =	\
 		src/testdir/amiga.vim \
 		src/xxd/Make_amiga.mak \
 
-# source files for Haiku (also in the extra archive)
+# Source files for Haiku (also in the extra archive).
 SRC_HAIKU =	\
 		README_haiku.txt \
 		src/os_haiku.h \
@@ -640,7 +641,7 @@ SRC_HAIKU =	\
 		src/gui_haiku.h \
 		src/proto/gui_haiku.pro \
 
-# source files for the Mac (also in the extra archive)
+# Source files for the Mac (also in the extra archive).
 SRC_MAC =	\
 		src/INSTALLmac.txt \
 		src/os_mac.h \
@@ -649,7 +650,7 @@ SRC_MAC =	\
 		src/proto/os_mac_conv.pro \
 		src/proto/os_macosx.pro \
 
-# source files for VMS (in the extra archive)
+# Source files for VMS (in the extra archive).
 SRC_VMS =	\
 		src/INSTALLvms.txt \
 		src/Make_vms.mms \
@@ -663,7 +664,7 @@ SRC_VMS =	\
 		src/xxd/Make_vms.mms \
 		vimtutor.com \
 
-# source files for QNX (in the extra archive)
+# Source files for QNX (in the extra archive).
 SRC_QNX =	\
 		src/os_qnx.c \
 		src/os_qnx.h \
@@ -671,7 +672,7 @@ SRC_QNX =	\
 		src/proto/gui_photon.pro \
 		src/proto/os_qnx.pro \
 
-# source files for the extra archive (all sources that are not for Unix)
+# Source files for the extra archive (all sources that are not for Unix).
 SRC_EXTRA =	\
 		$(SRC_AMI) \
 		$(SRC_AMI_DOS) \
@@ -686,7 +687,7 @@ SRC_EXTRA =	\
 		src/os_vms_fix.com \
 		src/toolbar.phi \
 
-# runtime files for all distributions
+# Runtime files for all distributions.
 RT_ALL =	\
 		README.txt \
 		README.md \
@@ -777,12 +778,12 @@ RT_ALL =	\
 		runtime/pack/dist/opt/swapmouse/plugin/swapmouse.vim \
 		runtime/pack/dist/opt/termdebug/plugin/termdebug.vim \
 
-# runtime files for all distributions without CR-NL translation
+# Runtime files for all distributions without CR/LF translation.
 RT_ALL_BIN =	\
 		runtime/doc/tags \
 		runtime/print/*.ps \
 
-# runtime script files
+# Runtime script files.
 RT_SCRIPTS =	\
 		runtime/filetype.vim \
 		runtime/scripts.vim \
@@ -818,15 +819,23 @@ RT_SCRIPTS =	\
 		runtime/plugin/README.txt \
 		runtime/syntax/*.vim \
 		runtime/syntax/README.txt \
+		runtime/syntax/modula2/opt/*.vim \
 		runtime/syntax/shared/*.vim \
 		runtime/syntax/shared/README.txt \
 		runtime/syntax/Makefile \
 		runtime/syntax/testdir/README.txt \
 		runtime/syntax/testdir/runtest.vim \
+		runtime/syntax/testdir/ftplugin/*.* \
 		runtime/syntax/testdir/input/*.* \
+		runtime/syntax/testdir/input/setup/*.* \
 		runtime/syntax/testdir/dumps/*.dump \
+		runtime/syntax/generator/Makefile \
+		runtime/syntax/generator/README.md \
+		runtime/syntax/generator/gen_syntax_vim.vim \
+		runtime/syntax/generator/update_date.vim \
+		runtime/syntax/generator/vim.vim.base \
 
-# Unix runtime
+# Unix-like runtime.
 RT_UNIX =	\
 		README_unix.txt \
 		runtime/hi16-action-make.png \
@@ -834,7 +843,7 @@ RT_UNIX =	\
 		runtime/gvim.desktop \
 		runtime/vim.desktop \
 
-# Unix and DOS runtime without CR-LF translation
+# Unix-like and MS Windows runtime without CR/LF translation.
 RT_UNIX_DOS_BIN =	\
 		runtime/vim16x16.gif \
 		runtime/vim16x16.png \
@@ -846,10 +855,10 @@ RT_UNIX_DOS_BIN =	\
 		runtime/vim48x48.png \
 		runtime/vim48x48.xpm \
 
-# runtime not for unix or extra
+# Runtime not for Unix-like or extra.
 RT_NO_UNIX =	\
 
-# runtime for Amiga (also in the extra archive)
+# Runtime for Amiga (also in the extra archive).
 RT_AMI_DOS =	\
 		runtime/doc/evim.man \
 		runtime/doc/vim.man \
@@ -857,20 +866,22 @@ RT_AMI_DOS =	\
 		runtime/doc/vimtutor.man \
 		runtime/doc/xxd.man \
 
-# DOS runtime (also in the extra archive)
+# MS Windows runtime (also in the extra archive).
 RT_DOS =	\
 		README_dos.txt \
 		runtime/doc/Make_mvc.mak \
+		runtime/indent/Make_mvc.mak \
 		runtime/tutor/Make_mvc.mak \
 		runtime/lang/Make_mvc.mak \
 		vimtutor.bat \
 
-# DOS runtime without CR-LF translation (also in the extra archive)
+# MS Windows runtime without CR/LF translation (also in the extra archive).
 RT_DOS_BIN =	\
 		runtime/vimlogo.cdr \
 		runtime/vimlogo.eps \
 		runtime/vimlogo.gif \
 		runtime/vimlogo.pdf \
+		runtime/vimlogo.svg \
 
 # Amiga runtime (also in the extra archive)
 RT_AMI =	\
@@ -892,7 +903,7 @@ RT_AMI =	\
 		runtime/tutor.info \
 		runtime/tutor/*.info \
 
-# runtime files in extra archive
+# Runtime files in extra archive.
 RT_EXTRA =	\
 		$(RT_AMI) \
 		$(RT_AMI_DOS) \
@@ -900,46 +911,46 @@ RT_EXTRA =	\
 		$(RT_DOS_BIN) \
 		README_mac.txt \
 
-# included in all Amiga archives
+# Included in all Amiga archives.
 ROOT_AMI =	\
 		Contents \
 		Contents.info \
 		runtime.info \
 		vimdir.info \
 
-# root files for the extra archive
+# Root files for the extra archive.
 ROOT_EXTRA =	\
 		$(ROOT_AMI) \
 
-# files for Amiga small binary (also in extra archive)
+# Files for Amiga small binary (also in extra archive).
 BIN_AMI =	\
 		README_amibin.txt \
 		README_amibin.txt.info \
 		Vim.info \
 		Xxd.info \
 
-# files for DOS binary (also in extra archive)
+# Files for MS Windows binary (also in extra archive).
 BIN_DOS =	\
 		README_bindos.txt \
 		uninstall.txt \
 
-# files for Win32 OLE binary (also in extra archive)
+# Files for Win32 OLE binary (also in extra archive).
 BIN_OLE =	\
 		README_ole.txt \
 
-# files for Win32s binary (also in extra archive)
+# Files for Win32s binary (also in extra archive).
 BIN_W32S =	\
 		README_w32s.txt \
 
-# files for VMS binary (also in extra archive)
+# Files for VMS binary (also in extra archive).
 BIN_VMS =	\
 		README_vms.txt \
 
-# files for OS/2 binary (also in extra archive)
+# Files for OS/2 binary (also in extra archive).
 BIN_OS2 =	\
 		README_os2.txt \
 
-# binary files for extra archive
+# Binary files for extra archive.
 BIN_EXTRA =	\
 		$(BIN_AMI) \
 		$(BIN_DOS) \
@@ -948,7 +959,7 @@ BIN_EXTRA =	\
 		$(BIN_VMS) \
 		$(BIN_OS2) \
 
-# all files for extra archive
+# All files for extra archive.
 EXTRA =		\
 		$(BIN_EXTRA) \
 		$(ROOT_EXTRA) \
@@ -957,7 +968,7 @@ EXTRA =		\
 		README_extra.txt \
 		runtime/vimlogo.xpm \
 
-# files in READMEdir that are included from the top dir
+# Files in READMEdir that are included from the top dir.
 IN_README_DIR = \
 		README.txt.info \
 		README_ami.txt \
@@ -977,6 +988,7 @@ IN_README_DIR = \
 		README_src.txt \
 		README_srcdos.txt \
 		README_unix.txt \
+		README_vimlogo.txt \
 		README_vms.txt \
 		README_w32s.txt \
 		Contents \
@@ -987,7 +999,7 @@ IN_README_DIR = \
 		src.info \
 		vimdir.info \
 
-# generic language files
+# Generic language files.
 LANG_GEN = \
 		runtime/doc/*-da.1 \
 		runtime/doc/*-da.UTF-8.1 \
@@ -1040,7 +1052,7 @@ LANG_GEN = \
 		runtime/spell/main.aap \
 		runtime/spell/*.vim \
 
-# generic language files, binary
+# Generic language files, binary.
 LANG_GEN_BIN = \
 		runtime/spell/README_en.txt \
 		runtime/spell/en.ascii.spl \
@@ -1050,7 +1062,7 @@ LANG_GEN_BIN = \
 		runtime/spell/en.latin1.sug \
 		runtime/spell/en.utf-8.sug \
 
-# all files for lang archive
+# All files for lang archive.
 LANG_SRC = \
 		src/po/README.txt \
 		src/po/README_mingw.txt \
@@ -1070,7 +1082,7 @@ LANG_SRC = \
 		src/po/big5corr.c \
 		src/po/*.po \
 
-# the language files for the Win32 lang archive
+# The language files for the Win32 lang archive.
 LANG_DOS = \
 		src/po/*.mo \
 

READMEdir/README_vimlogo.txt

@@ -0,0 +1,11 @@
+The Python project that creates `vimlogo.svg` can be found at
+`https://github.com/ShayHill/vimlogo`.  The Vim license applies.
+
+`vimlogo.svg` is an effort to remove errors and inadvertant inconsistencies
+from the original vim logo while maintaing the original design. `vimlogo.svg`
+is based on the `vimlogo.svg` file (previously?) found at
+`https://www.vim.org/logos.php`
+
+As of 2024 Jan 30, `vimlogo.svg` is a separate project from `vimlogo.cdr`,
+`vimlogo.eps`, `vimlogo.gif`, `vimlogo.pdf`, and `vimlogo.xpm`, all of which
+are slightly different from each other.

ci/remove_snap.sh

@@ -0,0 +1,13 @@
+#!/usr/bin/env sh
+pushd /etc/apt/preferences.d/
+cat > nosnap.pref <<EOF
+# To prevent repository packages from triggering the installation of snap,
+# this file forbids snapd from being installed by APT.
+
+Package: snapd
+Pin: release a=*
+Pin-Priority: -10
+EOF
+popd
+snap remove --purge $(snap list | awk '!/^Name|^core/ {print $1}')
+apt-get purge -y snapd

nsis/README.txt

@@ -29,18 +29,26 @@ To build the installable .exe:
 
 4.  Get a "diff.exe" program.  If you skip this the built-in diff will always
     be used (which is fine for most users).  If you do have your own
-    "diff.exe" put it in the "../.." directory (above the "vim90" directory,
+    "diff.exe" put it in the "../.." directory (above the "vim91" directory,
     it's the same for all Vim versions).
     You can find one in previous Vim versions or in this archive:
-		http://www.mossbayeng.com/~ron/vim/diffutils.tar.gz
+	http://www.mossbayeng.com/~ron/vim/diffutils.tar.gz
 
-5   Also put winpty32.dll and winpty-agent.exe in "../.." (above the "vim90"
+5.  Also put "winpty32.dll" and "winpty-agent.exe" in "../.." (above the "vim91"
     directory).  This is required for the terminal window.
 
-6.  Do "make uganda.nsis.txt" in runtime/doc.  This requires sed, you may have
+6.  To use stronger encryption, add the Sodium library.  You can get it here:
+	https://github.com/jedisct1/libsodium/releases/download/1.0.19-RELEASE/libsodium-1.0.19-msvc.zip
+    Unpack the archive.  Put the "libsodium.dll" from
+    path/to/libsodium/Win32/Release/v143/dynamic for the 32‐bit version or
+    path/to/libsodium/X64/Release/v143/dynamic for the 64‐bit version in the
+    "../.." directory (above the "vim91" directory, where "diff.exe" and
+    "winpty32.dll").
+
+7.  Do "make uganda.nsis.txt" in runtime/doc.  This requires sed, you may have
     to do this on Unix.  Make sure the file is in DOS file format!
 
-7.  Get gettext and iconv DLLs from the following site:
+8.  Get gettext and iconv DLLs from the following site:
 	https://github.com/mlocati/gettext-iconv-windows/releases
     Both 64- and 32-bit versions are needed.
     Download the files gettextX.X.X.X-iconvX.XX-shared-{32,64}.zip, extract

nsis/gvim.nsi

@@ -1,6 +1,6 @@
 # NSIS file to create a self-installing exe for Vim.
 # It requires NSIS version 3.0 or later.
-# Last Change:	2014 Nov 5
+# Last Change:	2024 Mar 17
 
 Unicode true
 
@@ -58,6 +58,37 @@ Unicode true
 !include "Sections.nsh"
 !include "x64.nsh"
 
+# See https://nsis.sourceforge.io/LogicLib
+;FileExists is already part of LogicLib, but returns true for directories
+;as well as files
+!macro _FileExists2 _a _b _t _f
+	!insertmacro _LOGICLIB_TEMP
+	StrCpy $_LOGICLIB_TEMP "0"
+;if path is not blank, continue to next check
+	StrCmp `${_b}` `` +4 0
+;if path exists, continue to next check (IfFileExists returns true if this
+;is a directory)
+	IfFileExists `${_b}` `0` +3
+;if path is not a directory, continue to confirm exists
+	IfFileExists `${_b}\*.*` +2 0
+	StrCpy $_LOGICLIB_TEMP "1" ;file exists
+;now we have a definitive value - the file exists or it does not
+	StrCmp $_LOGICLIB_TEMP "1" `${_t}` `${_f}`
+!macroend
+!undef FileExists
+!define FileExists `"" FileExists2`
+!macro _DirExists _a _b _t _f
+	!insertmacro _LOGICLIB_TEMP
+	StrCpy $_LOGICLIB_TEMP "0"
+;if path is not blank, continue to next check
+	StrCmp `${_b}` `` +3 0
+;if directory exists, continue to confirm exists
+	IfFileExists `${_b}\*.*` 0 +2
+	StrCpy $_LOGICLIB_TEMP "1"
+	StrCmp $_LOGICLIB_TEMP "1" `${_t}` `${_f}`
+!macroend
+!define DirExists `"" DirExists`
+
 !define PRODUCT		"Vim ${VER_MAJOR}.${VER_MINOR}"
 !define UNINST_REG_KEY	"Software\Microsoft\Windows\CurrentVersion\Uninstall"
 !define UNINST_REG_KEY_VIM  "${UNINST_REG_KEY}\${PRODUCT}"
@@ -167,9 +198,11 @@ Page custom SetCustom ValidateCustom
     !include "lang\danish.nsi"
     !include "lang\dutch.nsi"
     !include "lang\german.nsi"
+    !include "lang\greek.nsi"
     !include "lang\italian.nsi"
     !include "lang\japanese.nsi"
     !include "lang\russian.nsi"
+    !include "lang\serbian.nsi"
     !include "lang\simpchinese.nsi"
     !include "lang\tradchinese.nsi"
     !include "lang\turkish.nsi"
@@ -363,9 +396,6 @@ Section "$(str_section_exe)" id_section_exe
 	File /oname=gvim.exe ${VIMSRC}\gvim_ole.exe
 !if /FileExists "${VIMSRC}\vim${BIT}.dll"
 	File ${VIMSRC}\vim${BIT}.dll
-!endif
-!if /FileExists "${VIMRT}\libsodium.dll"
-	File ${VIMRT}\libsodium.dll
 !endif
 	File /oname=install.exe ${VIMSRC}\installw32.exe
 	File /oname=uninstall.exe ${VIMSRC}\uninstallw32.exe
@@ -377,9 +407,18 @@ Section "$(str_section_exe)" id_section_exe
 	File ..\uninstall.txt
 	File ${VIMRT}\*.vim
 
+!if /FileExists "${VIMTOOLS}\diff.exe"
 	File ${VIMTOOLS}\diff.exe
+!endif
+!if /FileExists "${VIMTOOLS}\winpty${BIT}.dll"
 	File ${VIMTOOLS}\winpty${BIT}.dll
+!endif
+!if /FileExists "${VIMTOOLS}\winpty-agent.exe"
 	File ${VIMTOOLS}\winpty-agent.exe
+!endif
+!if /FileExists "${VIMTOOLS}\libsodium.dll"
+	File ${VIMTOOLS}\libsodium.dll
+!endif
 
 	SetOutPath $0\colors
 	File /r ${VIMRT}\colors\*.*
@@ -388,17 +427,22 @@ Section "$(str_section_exe)" id_section_exe
 	File ${VIMRT}\compiler\*.*
 
 	SetOutPath $0\doc
-	File ${VIMRT}\doc\*.txt
+	File /x uganda.nsis.txt ${VIMRT}\doc\*.txt
 	File ${VIMRT}\doc\tags
 
 	SetOutPath $0\ftplugin
 	File ${VIMRT}\ftplugin\*.*
 
 	SetOutPath $0\indent
-	File ${VIMRT}\indent\*.*
+	File ${VIMRT}\indent\README.txt
+	File ${VIMRT}\indent\*.vim
+
+	SetOutPath $0\keymap
+	File ${VIMRT}\keymap\README.txt
+	File ${VIMRT}\keymap\*.vim
 
 	SetOutPath $0\macros
-	File /r ${VIMRT}\macros\*.*
+	File /r /x *.info ${VIMRT}\macros\*.*
 
 	SetOutPath $0\pack
 	File /r ${VIMRT}\pack\*.*
@@ -416,7 +460,7 @@ Section "$(str_section_exe)" id_section_exe
 	File ${VIMSRC}\vim.ico
 
 	SetOutPath $0\syntax
-	File /r /x testdir ${VIMRT}\syntax\*.*
+	File /r /x testdir /x generator /x Makefile ${VIMRT}\syntax\*.*
 
 	SetOutPath $0\spell
 	File ${VIMRT}\spell\*.txt
@@ -428,7 +472,7 @@ Section "$(str_section_exe)" id_section_exe
 	File ${VIMRT}\tools\*.*
 
 	SetOutPath $0\tutor
-	File ${VIMRT}\tutor\*.*
+	File /x Makefile /x *.info ${VIMRT}\tutor\*.*
 SectionEnd
 
 ##########################################################
@@ -559,10 +603,7 @@ Section "$(str_section_nls)" id_section_nls
 	SectionIn 1 3
 
 	SetOutPath $0\lang
-	File /r ${VIMRT}\lang\*.*
-	SetOutPath $0\keymap
-	File ${VIMRT}\keymap\README.txt
-	File ${VIMRT}\keymap\*.vim
+	File /r /x Makefile ${VIMRT}\lang\*.*
 	SetOutPath $0
 	!insertmacro InstallLib DLL NOTSHARED REBOOT_NOTPROTECTED \
 	    "${GETTEXT}\gettext${BIT}\libintl-8.dll" \
@@ -942,7 +983,7 @@ Section "un.$(str_unsection_register)" id_unsection_register
 	SectionIn RO
 
 	# Apparently $INSTDIR is set to the directory where the uninstaller is
-	# created.  Thus the "vim61" directory is included in it.
+	# created.  Thus the "vim91" directory is included in it.
 	StrCpy $0 "$INSTDIR"
 
 	# delete the context menu entry and batch files
@@ -1039,6 +1080,7 @@ Section "un.$(str_unsection_exe)" id_unsection_exe
 	RMDir /r $0\tutor
 	RMDir /r $0\lang
 	RMDir /r $0\keymap
+	RMDir /r $0\bitmaps
 	Delete $0\*.exe
 	Delete $0\*.bat
 	Delete $0\*.vim
@@ -1048,14 +1090,17 @@ Section "un.$(str_unsection_exe)" id_unsection_exe
 	  MessageBox MB_OK|MB_ICONEXCLAMATION $(str_msg_rm_exe_fail) /SD IDOK
 	${EndIf}
 
-	# No error message if the "vim62" directory can't be removed, the
+	# No error message if the "vim91" directory can't be removed, the
 	# gvimext.dll may still be there.
 	RMDir $0
 SectionEnd
 
 # Remove "vimfiles" directory under the specified directory.
 !macro RemoveVimfiles dir
-	${If} ${FileExists} ${dir}\vimfiles
+	${If} ${FileExists} ${dir}\_viminfo
+	  Delete ${dir}\_viminfo
+	${EndIf}
+	${If} ${DirExists} ${dir}\vimfiles
 	  RMDir ${dir}\vimfiles\colors
 	  RMDir ${dir}\vimfiles\compiler
 	  RMDir ${dir}\vimfiles\doc
@@ -1065,6 +1110,9 @@ SectionEnd
 	  RMDir ${dir}\vimfiles\keymap
 	  RMDir ${dir}\vimfiles\plugin
 	  RMDir ${dir}\vimfiles\syntax
+	  ${If} ${FileExists} ${dir}\vimfiles\.netrwhist*
+	    Delete ${dir}\vimfiles\.netrwhist*
+	  ${EndIf}
 	  RMDir ${dir}\vimfiles
 	${EndIf}
 !macroend

nsis/lang/greek.nsi

@@ -0,0 +1,276 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# greek.nsi: Greek language strings for gvim NSIS installer.
+#
+# Locale ID    : 1032
+# fileencoding : UTF-8
+# Author       : Christos Longros
+
+!insertmacro MUI_LANGUAGE "Greek"
+
+
+# Overwrite the default translation.
+# These strings should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_GREEK} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_GREEK} \
+        "$(^Name) Uninstall"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_GREEK} \
+#    "Φάκελος προορισμός (Πρέπει να τελειώνει σε $\"vim$\")"
+
+LangString str_show_readme          ${LANG_GREEK} \
+    "Εμφάνιση README μετά την ολοκλήρωση της εγκατάστασης"
+
+# Install types:
+LangString str_type_typical         ${LANG_GREEK} \
+    "Typical"
+
+LangString str_type_minimal         ${LANG_GREEK} \
+    "Minimal"
+
+LangString str_type_full            ${LANG_GREEK} \
+    "Full"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_GREEK} \
+    "Απεγκατάσταση υπάρχουσων εκδόσεων"
+LangString str_desc_old_ver         ${LANG_GREEK} \
+    "Απεγκατάσταση υπάρχουσων εκδόσεων Vim από το σύστημά σας."
+
+LangString str_section_exe          ${LANG_GREEK} \
+    "Vim GUI and runtime files"
+LangString str_desc_exe             ${LANG_GREEK} \
+    "Vim GUI executables and runtime files.  This component is required."
+
+LangString str_section_console      ${LANG_GREEK} \
+    "Vim console program"
+LangString str_desc_console         ${LANG_GREEK} \
+    "Console version of Vim (vim.exe)."
+
+LangString str_section_batch        ${LANG_GREEK} \
+    "Δημιουργία αρχείων .bat"
+LangString str_desc_batch           ${LANG_GREEK} \
+    "Δημιουργία αρχείων .bat από παράγωγα Vim στον κατάλογο των Windows για \
+     χρήση γραμμής εντολών."
+
+LangString str_group_icons          ${LANG_GREEK} \
+    "Δημιουργία  εικονιδίων Vim"
+LangString str_desc_icons           ${LANG_GREEK} \
+    "Δημιουργία εικονιδίων για τον Vim σε διάφορες τοποθεσίες για την διευκόλυνση της προσβασιμότητας."
+
+LangString str_section_desktop      ${LANG_GREEK} \
+    "Στην επιφάνεια εργασίας"
+LangString str_desc_desktop         ${LANG_GREEK} \
+    "Δημιουργία εικονιδίων για gVim εκτελέσιμα στην επιφάνεια εργασίας."
+
+LangString str_section_start_menu   ${LANG_GREEK} \
+    "In the Start Menu Programs Folder"
+LangString str_desc_start_menu      ${LANG_GREEK} \
+    "Προσθήκη του Vim στον φάκελο προγραμμάτων του μενού εκκίνησης."
+
+#LangString str_section_quick_launch ${LANG_GREEK} \
+#    "In the Quick Launch Bar"
+#LangString str_desc_quick_launch    ${LANG_GREEK} \
+#    "Add Vim shortcut in the quick launch bar."
+
+LangString str_section_edit_with    ${LANG_GREEK} \
+    "Add Vim Context Menu"
+LangString str_desc_edit_with       ${LANG_GREEK} \
+    "Add Vim to the $\"Open With...$\" context menu list."
+
+#LangString str_section_edit_with32  ${LANG_GREEK} \
+#    "32-bit Version"
+#LangString str_desc_edit_with32     ${LANG_GREEK} \
+#    "Add Vim to the $\"Open With...$\" context menu list \
+#     for 32-bit applications."
+
+#LangString str_section_edit_with64  ${LANG_GREEK} \
+#    "64-bit Version"
+#LangString str_desc_edit_with64     ${LANG_GREEK} \
+#    "Add Vim to the $\"Open With...$\" context menu list \
+#     for 64-bit applications."
+
+LangString str_section_vim_rc       ${LANG_GREEK} \
+    "Δημιουργία προεπιλεγμένων ρυθμίσεων"
+LangString str_desc_vim_rc          ${LANG_GREEK} \
+    "Δημιουργία προεπιλεγμένου αρχείου ρυθμίσεων (_vimrc) αν δεν υπάρχει ήδη."
+
+LangString str_group_plugin         ${LANG_GREEK} \
+    "Δημιουργία καταλόγων Plugin"
+LangString str_desc_plugin          ${LANG_GREEK} \
+    "Δημιουργία καταλόγων plugin.  Οι κατάλογοι Plugin επιτρέπουν την επέκταση του Vim \
+     με την μεταφορά ενός αρχείου σε έναν κατάλογο."
+
+LangString str_section_plugin_home  ${LANG_GREEK} \
+    "Private"
+LangString str_desc_plugin_home     ${LANG_GREEK} \
+    "Δημιουργία καταλόγων plugin στον κατάλογο HOME."
+
+LangString str_section_plugin_vim   ${LANG_GREEK} \
+    "Shared"
+LangString str_desc_plugin_vim      ${LANG_GREEK} \
+    "Δημιουργία καταλόγων plugin στον κατάλογο εγκατάστασης του Vim, χρησιμοποιείται από \
+     όλους στο σύστημα."
+
+LangString str_section_nls          ${LANG_GREEK} \
+    "Native Language Support"
+LangString str_desc_nls             ${LANG_GREEK} \
+    "Install files for native language support."
+
+LangString str_unsection_register   ${LANG_GREEK} \
+    "Unregister Vim"
+LangString str_desc_unregister      ${LANG_GREEK} \
+    "Unregister Vim from the system."
+
+LangString str_unsection_exe        ${LANG_GREEK} \
+    "Remove Vim Executables/Runtime Files"
+LangString str_desc_rm_exe          ${LANG_GREEK} \
+    "Remove all Vim executables and runtime files."
+
+LangString str_ungroup_plugin       ${LANG_GREEK} \
+    "Remove plugin directories"
+LangString str_desc_rm_plugin       ${LANG_GREEK} \
+    "Remove the plugin directories if they are empty."
+
+LangString str_unsection_plugin_home ${LANG_GREEK} \
+    "Private"
+LangString str_desc_rm_plugin_home  ${LANG_GREEK} \
+    "Remove the plugin directories from HOME directory."
+
+LangString str_unsection_plugin_vim ${LANG_GREEK} \
+    "Shared"
+LangString str_desc_rm_plugin_vim   ${LANG_GREEK} \
+    "Remove the plugin directories from Vim install directory."
+
+LangString str_unsection_rootdir    ${LANG_GREEK} \
+    "Remove the Vim root directory"
+LangString str_desc_rm_rootdir      ${LANG_GREEK} \
+    "Remove the Vim root directory. It contains your Vim configuration files!"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_GREEK} \
+#    "Found $vim_old_ver_count Vim versions on your system.$\r$\n\
+#     This installer can only handle ${VIM_MAX_OLD_VER} versions \
+#     at most.$\r$\n\
+#     Please remove some versions and start again."
+
+#LangString str_msg_invalid_root  ${LANG_GREEK} \
+#    "Invalid install path: $vim_install_root!$\r$\n\
+#     It should end with $\"vim$\"."
+
+#LangString str_msg_bin_mismatch  ${LANG_GREEK} \
+#    "Binary path mismatch!$\r$\n$\r$\n\
+#     Expect the binary path to be $\"$vim_bin_path$\",$\r$\n\
+#     but system indicates the binary path is $\"$INSTDIR$\"."
+
+#LangString str_msg_vim_running   ${LANG_GREEK} \
+#    "Vim is still running on your system.$\r$\n\
+#     Please close all instances of Vim before you continue."
+
+#LangString str_msg_register_ole  ${LANG_GREEK} \
+#    "Attempting to register Vim with OLE. \
+#     There is no message indicates whether this works or not."
+
+#LangString str_msg_unreg_ole     ${LANG_GREEK} \
+#    "Attempting to unregister Vim with OLE. \
+#     There is no message indicates whether this works or not."
+
+#LangString str_msg_rm_start      ${LANG_GREEK} \
+#    "Uninstalling the following version:"
+
+#LangString str_msg_rm_fail       ${LANG_GREEK} \
+#    "Fail to uninstall the following version:"
+
+#LangString str_msg_no_rm_key     ${LANG_GREEK} \
+#    "Cannot find uninstaller registry key."
+
+#LangString str_msg_no_rm_reg     ${LANG_GREEK} \
+#    "Cannot find uninstaller from registry."
+
+#LangString str_msg_no_rm_exe     ${LANG_GREEK} \
+#    "Cannot access uninstaller."
+
+#LangString str_msg_rm_copy_fail  ${LANG_GREEK} \
+#    "Fail to copy uninstaller to temporary directory."
+
+#LangString str_msg_rm_run_fail   ${LANG_GREEK} \
+#    "Αποτυχία εκτέλεσης της λειτουργίας απεγκατάστασης."
+
+#LangString str_msg_abort_install ${LANG_GREEK} \
+#    "Installer will abort."
+
+LangString str_msg_install_fail  ${LANG_GREEK} \
+    "Η εγκατάσταση απέτυχε. Better luck next time."
+
+LangString str_msg_rm_exe_fail   ${LANG_GREEK} \
+    "Μερικά αρχεία στο $0 δεν έχουν διαγραφεί!$\r$\n\
+     Πρέπει να το κάνετε χειροκίνητα."
+
+#LangString str_msg_rm_root_fail  ${LANG_GREEK} \
+#    "ΠΡΟΕΙΔΟΠΟΙΗΣΗ: Αδύνατη η αφαίρεση $\"$vim_install_root$\", δεν είναι κενό!"
+
+LangString str_msg_uninstalling  ${LANG_GREEK} \
+    "Απεγκατάσταση παλιάς έκδοσης the old version..."
+
+LangString str_msg_registering   ${LANG_GREEK} \
+    "Καταχώρηση..."
+
+LangString str_msg_unregistering ${LANG_GREEK} \
+    "Unregistering..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_GREEK} \
+    "Επιλογή ρυθμίσεων _vimrc"
+LangString str_vimrc_page_subtitle ${LANG_GREEK} \
+    "Choose the settings for enhancement, keyboard and mouse."
+
+LangString str_msg_compat_title    ${LANG_GREEK} \
+    " Συμπεριφορά Vi / Vim  "
+LangString str_msg_compat_desc     ${LANG_GREEK} \
+    "&Compatibility and enhancements"
+LangString str_msg_compat_vi       ${LANG_GREEK} \
+    "Vi compatible"
+LangString str_msg_compat_vim      ${LANG_GREEK} \
+    "Vim original"
+LangString str_msg_compat_defaults ${LANG_GREEK} \
+    "Vim with some enhancements (load defaults.vim)"
+LangString str_msg_compat_all      ${LANG_GREEK} \
+    "Vim with all enhancements (load vimrc_example.vim) (Default)"
+
+LangString str_msg_keymap_title   ${LANG_GREEK} \
+    " Mappings "
+LangString str_msg_keymap_desc    ${LANG_GREEK} \
+    "&Remap a few keys for Windows (Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F, etc)"
+LangString str_msg_keymap_default ${LANG_GREEK} \
+    "Do not remap keys (Default)"
+LangString str_msg_keymap_windows ${LANG_GREEK} \
+    "Remap a few keys"
+
+LangString str_msg_mouse_title   ${LANG_GREEK} \
+    " Ποντίκι "
+LangString str_msg_mouse_desc    ${LANG_GREEK} \
+    "&Behavior of right and left buttons"
+LangString str_msg_mouse_default ${LANG_GREEK} \
+    "Right: popup menu, Left: visual mode (Default)"
+LangString str_msg_mouse_windows ${LANG_GREEK} \
+    "Right: popup menu, Left: select mode (Windows)"
+LangString str_msg_mouse_unix    ${LANG_GREEK} \
+    "Right: extends selection, Left: visual mode (Unix)"
+

nsis/lang/russian.nsi

@@ -22,20 +22,20 @@ LangString ^UninstallCaption ${LANG_RUSSIAN} \
 ##############################################################################
 
 #LangString str_dest_folder          ${LANG_RUSSIAN} \
-#    "Маршрут к каталогу установки (должен оканчиваться каталогом $\"vim$\")"
+#    "Маршрут установки программы (должен завершаться каталогом $\"vim$\")"
 
 LangString str_show_readme          ${LANG_RUSSIAN} \
-    "После окончания установки ознакомиться с кратким описанием"
+    " Ознакомиться с кратким описанием программы"
 
 # Install types:
 LangString str_type_typical         ${LANG_RUSSIAN} \
-    "Стандартная"
+    "Стандартный"
 
 LangString str_type_minimal         ${LANG_RUSSIAN} \
-    "Минимальная"
+    "Минимальный"
 
 LangString str_type_full            ${LANG_RUSSIAN} \
-    "Полная"
+    "Полный"
 
 
 ##############################################################################
@@ -50,59 +50,61 @@ LangString str_desc_old_ver         ${LANG_RUSSIAN} \
 LangString str_section_exe          ${LANG_RUSSIAN} \
     "Графический интерфейс и вспомогательные файлы"
 LangString str_desc_exe             ${LANG_RUSSIAN} \
-    "Графический интерфейс программы Vim и все необходимые для этого файлы. \
+    "Исполняемые файлы и все необходимые для работы программы файлы. \
     Это обязательный компонент"
 
 LangString str_section_console      ${LANG_RUSSIAN} \
     "Консольная программа Vim"
 LangString str_desc_console         ${LANG_RUSSIAN} \
-    "Вариант редактора Vim (vim.exe), используемый в командной оболочке"
+    "Вариант редактора Vim (vim.exe), используемый для работы в командной \
+    оболочке"
 
 LangString str_section_batch        ${LANG_RUSSIAN} \
     "Создать командные файлы"
 LangString str_desc_batch           ${LANG_RUSSIAN} \
-    "Создание командных bat-файлов позволяющих работать с редактором \
-     Vim из командной строки Windows"
+    "Создание командных bat-файлов в каталоге Windows для работы с редактором \
+    Vim из командной строки"
 
 LangString str_group_icons          ${LANG_RUSSIAN} \
     "Создать ярлыки для редактора Vim"
 LangString str_desc_icons           ${LANG_RUSSIAN} \
-    "Создание ярлыков редактора Vim для облегчения запуска программы"
+    "Создание ярлыков программы для удобного и быстрого запуска редактора Vim"
 
 LangString str_section_desktop      ${LANG_RUSSIAN} \
     "На Рабочем столе"
 LangString str_desc_desktop         ${LANG_RUSSIAN} \
-    "Создание ярлыков программы Gvim на Рабочем столе"
+    "Создание ярлыков редактора Vim на Рабочем столе"
 
 LangString str_section_start_menu   ${LANG_RUSSIAN} \
     "В меню кнопки Пуск"
 LangString str_desc_start_menu      ${LANG_RUSSIAN} \
-    "Создание ярлыков программы Gvim в меню кнопки Пуск"
+    "Создание ярлыков редактора Vim в меню кнопки Пуск"
 
 #LangString str_section_quick_launch ${LANG_RUSSIAN} \
 #    "На панели быстрого запуска"
 #LangString str_desc_quick_launch    ${LANG_RUSSIAN} \
-#    "Создание ярлыков программы GVim на панели быстрого запуска"
+#    "Создание ярлыков редактора Vim на панели быстрого запуска"
 
 LangString str_section_edit_with    ${LANG_RUSSIAN} \
-    "В контекстном меню"
+    "Запуск редактора Vim из контекстного меню"
 LangString str_desc_edit_with       ${LANG_RUSSIAN} \
-    "Добавление вызова программы Gvim в пункт $\"Открыть с помощью...$\" контекстного меню"
+    "Добавление необходимой строки в пункт контекстного меню \
+    «Открыть с помощью...»"
 
 #LangString str_section_edit_with32  ${LANG_RUSSIAN} \
-#    "32-разрядная версия программы"
+#    "Для 32-разрядной версии программы"
 #LangString str_desc_edit_with32     ${LANG_RUSSIAN} \
-#    "Добавление вызова программы Gvim в пункт $\"Открыть с помощью...$\" контекстного меню \
-#     для 32-разрядных приложений"
+#    "Добавление в пункт контекстного меню \
+#    «Открыть с помощью...» 32-разрядных приложений"
 
 #LangString str_section_edit_with64  ${LANG_RUSSIAN} \
-#    "64-разрядная версия программы"
+#    "Для 64-разрядной версии программы"
 #LangString str_desc_edit_with64     ${LANG_RUSSIAN} \
-#    "Добавление вызова программы Gvim в пункт $\"Открыть с помощью...$\" контекстного меню \
-#     для 64-разрядных приложений"
+#    "Добавление в пункт контекстного меню \
+#    «Открыть с помощью...» 64-разрядных приложений"
 
 LangString str_section_vim_rc       ${LANG_RUSSIAN} \
-    "Настройки программы по умолчанию"
+    "Начальная настройка программы"
 LangString str_desc_vim_rc          ${LANG_RUSSIAN} \
     "Создание файла _vimrc с предустановленными настройками, если нет других \
     файлов настроек"
@@ -110,25 +112,31 @@ LangString str_desc_vim_rc          ${LANG_RUSSIAN} \
 LangString str_group_plugin         ${LANG_RUSSIAN} \
     "Создать каталог для подключаемых модулей"
 LangString str_desc_plugin          ${LANG_RUSSIAN} \
-    "Создание каталога для размещения подключаемых модулей, которые расширяют \
-     возможности редактора Vim"
+    "Создание каталога для подключаемых модулей, которые расширяют возможности \
+    редактора Vim"
 
 LangString str_section_plugin_home  ${LANG_RUSSIAN} \
     "Личный каталог"
 LangString str_desc_plugin_home     ${LANG_RUSSIAN} \
-    "Создание каталога для подключаемых модулей в домашнем каталоге пользователя"
+    "В домашнем каталоге пользователя. Модули в этом каталоге доступны только \
+    этому пользователю"
 
 LangString str_section_plugin_vim   ${LANG_RUSSIAN} \
     "Общий каталог"
 LangString str_desc_plugin_vim      ${LANG_RUSSIAN} \
-    "Создание каталога для подключаемых модулей в каталоге установки редактора Vim. \
-     Модули в этом каталоге будут доступны для любого пользователя \
-     зарегистрировавшегося в системе"
+    "В каталоге установки редактора Vim. Модули в этом каталоге доступны для \
+    всех пользователей"
+
+#LangString str_section_vis_vim      ${LANG_RUSSIAN} \
+#    "Подключаемый модуль VisVim"
+#LangString str_desc_vis_vim         ${LANG_RUSSIAN} \
+#    "Подключаемый модуль VisVim используется для интеграции с \
+#    Microsoft Visual Studio"
 
 LangString str_section_nls          ${LANG_RUSSIAN} \
     "Поддержка региональных языков"
 LangString str_desc_nls             ${LANG_RUSSIAN} \
-    "Установка файлов для поддержки региональных языков операционной системы"
+    "Установка файлов для работы программе на различных региональных языках"
 
 LangString str_unsection_register   ${LANG_RUSSIAN} \
     "Отменить регистрацию компонентов программы Vim"
@@ -158,8 +166,8 @@ LangString str_desc_rm_plugin_vim   ${LANG_RUSSIAN} \
 LangString str_unsection_rootdir    ${LANG_RUSSIAN} \
     "Удалить основной каталог программы Vim"
 LangString str_desc_rm_rootdir      ${LANG_RUSSIAN} \
-    "Удаление основного каталога программы Vim. В этом каталоге находятся файлы \
-    настроек!"
+    "Удаление основного каталога программы Vim. В этом каталоге находятся \
+    файлы настроек!"
 
 
 ##############################################################################
@@ -199,10 +207,11 @@ LangString str_desc_rm_rootdir      ${LANG_RUSSIAN} \
 #    "Произошёл сбой при выполнении удаления следующих версий программы:"
 
 #LangString str_msg_no_rm_key     ${LANG_RUSSIAN} \
-#    "Не удалось найти раздел реестра, содержащий информацию об удалении программы"
+#    "Не удалось найти раздел реестра, содержащий информацию об удалении \
+#    программы"
 
 #LangString str_msg_no_rm_reg     ${LANG_RUSSIAN} \
-#    "Не удалось найти программу выполняющую удаление, указанную в разделе реестра"
+#    "Не удалось найти указанную в реестре программу, которая выполняет удаление"
 
 #LangString str_msg_no_rm_exe     ${LANG_RUSSIAN} \
 #    "Отсутствуют права на доступ к программе, выполняющей удаление"
@@ -219,14 +228,15 @@ LangString str_desc_rm_rootdir      ${LANG_RUSSIAN} \
 LangString str_msg_install_fail  ${LANG_RUSSIAN} \
     "Произошла ошибка при установке программы. Попробуйте повторить установку \
     немного попозже"
-# когда луна будет в другой фазе и ветер должен дуть с юго‐запада
+# когда Луна будет в другой фазе и ветер должен дуть с юго‐запада
 
 LangString str_msg_rm_exe_fail   ${LANG_RUSSIAN} \
     "Некоторые файлы не были удалены из каталога $0 $\r$\n\
      Необходимо выполнить их удаление самостоятельно"
 
 #LangString str_msg_rm_root_fail  ${LANG_RUSSIAN} \
-#    "Внимание! В каталоге $\"$vim_install_root$\" содержатся файлы. Удаление каталога не выполнено"
+#    "Внимание! В каталоге $\"$vim_install_root$\" содержатся файлы. Удаление \
+#    каталога не выполнено"
 
 LangString str_msg_uninstalling  ${LANG_RUSSIAN} \
     "Удаление предыдущих версий программ..."
@@ -245,7 +255,8 @@ LangString str_msg_unregistering ${LANG_RUSSIAN} \
 LangString str_vimrc_page_title    ${LANG_RUSSIAN} \
     "Установка параметров программы"
 LangString str_vimrc_page_subtitle ${LANG_RUSSIAN} \
-    "Параметры, используемые для клавиатуры, «мыши» и функциональности программы"
+    "Параметры, используемые для клавиатуры, манипулятора «мышь» и \
+    функциональности программы"
 
 LangString str_msg_compat_title    ${LANG_RUSSIAN} \
     " Варианты использования программы "
@@ -256,27 +267,26 @@ LangString str_msg_compat_vi       ${LANG_RUSSIAN} \
 LangString str_msg_compat_vim      ${LANG_RUSSIAN} \
     "Работа в варианте функциональности редактора Vim"
 LangString str_msg_compat_defaults ${LANG_RUSSIAN} \
-    "Работа редактора Vim с некоторыми улучшениями (файл defaults.vim)"
+    "Включить некоторые улучшения (из файла defaults.vim)"
 LangString str_msg_compat_all      ${LANG_RUSSIAN} \
-    "Работа редактора Vim со всеми улучшениями (файл vimrc_example.vim). \
-    Используется по умолчанию"
+    "Включить все улучшения (из файла vimrc_example.vim). Стандартно"
 
 LangString str_msg_keymap_title   ${LANG_RUSSIAN} \
     " Клавиатурные команды "
 LangString str_msg_keymap_desc    ${LANG_RUSSIAN} \
-    "Клавиатурные команды используемые в ОС Windows (CTRL+V, CTRL+C, CTRL+S, CTRL+F и т. п.)"
+    "Изменение клавиатурных команд CTRL+V, CTRL+C, CTRL+S, CTRL+F и т. п."
 LangString str_msg_keymap_default ${LANG_RUSSIAN} \
-    "Не изменять клавиатурные команды. Использовать принятые в редакторе Vim"
+    "Без изменения, использовать как принято в редакторе Vim"
 LangString str_msg_keymap_windows ${LANG_RUSSIAN} \
-    "Изменить указанные клавиатурные команды"
+    "Изменить и использовать как принято в ОС Windows"
 
 LangString str_msg_mouse_title   ${LANG_RUSSIAN} \
     " Манипулятор «мышь» "
 LangString str_msg_mouse_desc    ${LANG_RUSSIAN} \
-    "Действий правой и левой кнопки манипулятора «мышь»"
+    "Действия правой и левой кнопки манипулятора «мышь»"
 LangString str_msg_mouse_default ${LANG_RUSSIAN} \
-    "Правая кнопка — всплывающее меню, левая кнопка — режим визуальный"
+    "Правая — всплывающее меню, левая — режим визуальный (Vim)"
 LangString str_msg_mouse_windows ${LANG_RUSSIAN} \
-    "Правая кнопка — всплывающее меню, левая кнопка — режим выборки (как в ОС Windows)"
+    "Правая — всплывающее меню, левая — режим выборки (Windows)"
 LangString str_msg_mouse_unix    ${LANG_RUSSIAN} \
-    "Правая кнопка — расширяемый режим выбора, левая кнопка — режим визуальный (как в UNIX‐подобных ОС)"
+    "Правая — расширение выборки, левая — режим визуальный (UNIX)"

nsis/lang/serbian.nsi

@@ -6,7 +6,7 @@
 # fileencoding : UTF-8
 # Author       : Ivan Pešić
 
-!insertmacro MUI_LANGUAGE "Српски"
+!insertmacro MUI_LANGUAGE "Serbian"
 
 
 # Overwrite the default translation.

runtime/autoload/dist/ft.vim

@@ -2,8 +2,8 @@ vim9script
 
 # Vim functions for file type detection
 #
-# Maintainer:	The Vim Project <https://github.com/vim/vim>
-# Last Change:	2023 Aug 10
+# Maintainer:		The Vim Project <https://github.com/vim/vim>
+# Last Change:		2024 Feb 18
 # Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 # These functions are moved here from runtime/filetype.vim to make startup
@@ -279,6 +279,19 @@ export def DtraceCheck()
   endif
 enddef
 
+export def FTdef()
+  if get(g:, "filetype_def", "") == "modula2" || IsModula2()
+    SetFiletypeModula2()
+    return
+  endif
+
+  if exists("g:filetype_def")
+    exe "setf " .. g:filetype_def
+  else
+    setf def
+  endif
+enddef
+
 export def FTe()
   if exists('g:filetype_euphoria')
     exe 'setf ' .. g:filetype_euphoria
@@ -517,16 +530,53 @@ def IsLProlog(): bool
   return getline(lnum) =~ '\<module\s\+\w\+\s*\.\s*\(%\|$\)'
 enddef
 
+def IsModula2(): bool
+  return getline(nextnonblank(1)) =~ '\<MODULE\s\+\w\+\s*\%(\[.*]\s*\)\=;\|^\s*(\*'
+enddef
+
+def SetFiletypeModula2()
+  const KNOWN_DIALECTS = ["iso", "pim", "r10"]
+  const KNOWN_EXTENSIONS = ["gm2"]
+  const LINE_COUNT = 200
+  const TAG = '(\*!m2\(\w\+\)\%(+\(\w\+\)\)\=\*)'
+
+  var dialect = get(g:, "modula2_default_dialect", "pim")
+  var extension = get(g:, "modula2_default_extension", "")
+
+  var matches = []
+
+  # ignore unknown dialects or badly formatted tags
+  for lnum in range(1, min([line("$"), LINE_COUNT]))
+    matches = matchlist(getline(lnum), TAG)
+    if !empty(matches)
+      if index(KNOWN_DIALECTS, matches[1]) >= 0
+         dialect = matches[1]
+      endif
+      if index(KNOWN_EXTENSIONS, matches[2]) >= 0
+         extension = matches[2]
+      endif
+      break
+    endif
+  endfor
+
+  modula2#SetDialect(dialect, extension)
+
+  setf modula2
+enddef
+
 # Determine if *.mod is ABB RAPID, LambdaProlog, Modula-2, Modsim III or go.mod
 export def FTmod()
+  if get(g:, "filetype_mod", "") == "modula2" || IsModula2()
+    SetFiletypeModula2()
+    return
+  endif
+
   if exists("g:filetype_mod")
     exe "setf " .. g:filetype_mod
   elseif expand("<afile>") =~ '\<go.mod$'
     setf gomod
   elseif IsLProlog()
     setf lprolog
-  elseif getline(nextnonblank(1)) =~ '\%(\<MODULE\s\+\w\+\s*;\|^\s*(\*\)'
-    setf modula2
   elseif IsRapid()
     setf rapid
   else

runtime/autoload/dist/man.vim

@@ -3,7 +3,7 @@
 " Maintainer:	Jason Franklin <jason@oneway.dev>
 " Maintainer:	SungHyun Nam <goweol@gmail.com>
 " Autoload Split: Bram Moolenaar
-" Last Change: 	2023 Jun 28
+" Last Change: 	2024 Jan 17 (make it work on AIX, see #13847)
 
 let s:cpo_save = &cpo
 set cpo-=C
@@ -13,14 +13,26 @@ let s:man_tag_depth = 0
 let s:man_sect_arg = ""
 let s:man_find_arg = "-w"
 try
-  if !has("win32") && $OSTYPE !~ 'cygwin\|linux' && system('uname -s') =~ "SunOS" && system('uname -r') =~ "^5"
-    let s:man_sect_arg = "-s"
-    let s:man_find_arg = "-l"
+  if !has("win32") && $OSTYPE !~ 'cygwin\|linux'
+    " cache the value
+    let uname_s = system('uname -s')
+
+    if uname_s =~ "SunOS" && system('uname -r') =~ "^5"
+      " Special Case for Man on SunOS
+      let s:man_sect_arg = "-s"
+      let s:man_find_arg = "-l"
+    elseif uname_s =~? 'AIX'
+      " Special Case for Man on AIX
+      let s:man_sect_arg = ""
+      let s:man_find_arg = ""
+    endif
   endif
 catch /E145:/
   " Ignore the error in restricted mode
 endtry
 
+unlet! uname_s
+
 func s:ParseIntoPageAndSection()
   " Accommodate a reference that terminates in a hyphen.
   "

runtime/autoload/dist/vimindent.vim

@@ -3,6 +3,9 @@ vim9script
 # Language:     Vim script
 # Maintainer:   github user lacygoill
 # Last Change:  2023 Jun 29
+#
+# Includes Changes from Vim:
+#  - 2024 Feb 09: Fix indent after literal Dict (A. Radev via #13966)
 
 # NOTE: Whenever you change the code, make sure the tests are still passing:
 #
@@ -381,7 +384,7 @@ const LINE_CONTINUATION_AT_EOL: string = '\%('
     # It can be the start of a dictionary or a block.
     # We only want to match the former.
     .. '\|' .. $'^\%({STARTS_CURLY_BLOCK}\)\@!.*\zs{{'
-    .. '\)\s*\%(\s#.*\)\=$'
+    .. '\)\s*\%(\s#[^{].*\)\=$'
 # }}}2
 # SOL {{{2
 # BACKSLASH_AT_SOL {{{3

runtime/autoload/getscript.vim

@@ -1,6 +1,7 @@
 " ---------------------------------------------------------------------
 " getscript.vim
-"  Author:	Charles E. Campbell
+"  Maintainer: This runtime file is looking for a new maintainer.
+"  Original Author: Charles E. Campbell
 "  Date:	Jan 21, 2014
 "  Version:	36
 "  Installing:	:help glvs-install

runtime/autoload/modula2.vim

@@ -0,0 +1,31 @@
+" Vim filetype plugin file
+" Language:	Modula-2
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2024 Jan 04
+
+" Dialect can be one of pim, iso, r10
+function modula2#GetDialect() abort
+
+  if exists("b:modula2.dialect")
+    return b:modula2.dialect
+  endif
+
+  if exists("g:modula2_default_dialect")
+    let dialect = g:modula2_default_dialect
+  else
+    let dialect = "pim"
+  endif
+
+  return dialect
+endfunction
+
+function modula2#SetDialect(dialect, extension = "") abort
+  if exists("b:modula2")
+    unlockvar! b:modula2
+  endif
+
+  let b:modula2 = #{ dialect: a:dialect, extension: a:extension }
+  lockvar! b:modula2
+endfunction
+
+" vim: nowrap sw=2 sts=2 ts=8 noet fdm=marker:

runtime/autoload/netrw.vim

@@ -1,11 +1,14 @@
 " netrw.vim: Handles file transfer and remote directory listing across
 "            AUTOLOAD SECTION
-" Date:		May 03, 2023
+" Maintainer: This runtime file is looking for a new maintainer.
+" Date:		  May 03, 2023
 " Version:	173a
 " Last Change:
 " 	2023 Nov 21 by Vim Project: ignore wildignore when expanding $COMSPEC	(v173a)
 " 	2023 Nov 22 by Vim Project: fix handling of very long filename on longlist style	(v173a)
-" Maintainer:	Charles E Campbell <NcampObell@SdrPchip.AorgM-NOSPAM>
+"   2024 Feb 19 by Vim Project: (announce adoption)
+"   2024 Feb 29 by Vim Project: handle symlinks in tree mode correctly
+" Former Maintainer:	Charles E Campbell
 " GetLatestVimScripts: 1075 1 :AutoInstall: netrw.vim
 " Copyright:    Copyright (C) 2016 Charles E. Campbell {{{1
 "               Permission is hereby granted to use and distribute this code,
@@ -2020,7 +2023,7 @@ fun! NetrwStatusLine()
 
   if !exists("w:netrw_explore_bufnr") || w:netrw_explore_bufnr != bufnr("%") || !exists("w:netrw_explore_line") || w:netrw_explore_line != line(".") || !exists("w:netrw_explore_list")
    " restore user's status line
-   let &stl        = s:netrw_users_stl
+   let &l:stl      = s:netrw_users_stl
    let &laststatus = s:netrw_users_ls
    if exists("w:netrw_explore_bufnr")|unlet w:netrw_explore_bufnr|endif
    if exists("w:netrw_explore_line") |unlet w:netrw_explore_line |endif
@@ -2121,9 +2124,9 @@ fun! netrw#NetRead(mode,...)
        let wholechoice = wholechoice . " " . choice
        let ichoice     = ichoice + 1
        if ichoice > a:0
-       	if !exists("g:netrw_quiet")
-	 call netrw#ErrorMsg(s:ERROR,"Unbalanced string in filename '". wholechoice ."'",3)
-	endif
+        if !exists("g:netrw_quiet")
+         call netrw#ErrorMsg(s:ERROR,"Unbalanced string in filename '". wholechoice ."'",3)
+        endif
 "        call Dret("netrw#NetRead :2 getcwd<".getcwd().">")
         return
        endif
@@ -2544,9 +2547,9 @@ fun! netrw#NetWrite(...) range
        let wholechoice= wholechoice . " " . choice
        let ichoice    = ichoice + 1
        if choice > a:0
-       	if !exists("g:netrw_quiet")
-	 call netrw#ErrorMsg(s:ERROR,"Unbalanced string in filename '". wholechoice ."'",13)
-	endif
+        if !exists("g:netrw_quiet")
+         call netrw#ErrorMsg(s:ERROR,"Unbalanced string in filename '". wholechoice ."'",13)
+        endif
 "        call Dret("netrw#NetWrite")
         return
        endif
@@ -2817,7 +2820,7 @@ fun! netrw#NetWrite(...) range
 
   if a:firstline == 1 && a:lastline == line("$")
    " restore modifiability; usually equivalent to set nomod
-   let &mod= mod
+   let &l:mod= mod
 "   call Decho(" ro=".&l:ro." ma=".&l:ma." mod=".&l:mod." wrap=".&l:wrap." (filename<".expand("%")."> win#".winnr()." ft<".&ft.">)",'~'.expand("<slnum>"))
   elseif !exists("leavemod")
    " indicate that the buffer has not been modified since last written
@@ -3006,7 +3009,7 @@ fun! s:NetrwGetFile(readcmd, tfile, method)
    setl isk-=/
    filetype detect
 "   call Decho("..local filetype<".&ft."> for buf#".bufnr()."<".bufname().">")
-   let &isk= iskkeep
+   let &l:isk= iskkeep
 "   call Dredir("ls!","NetrwGetFile (renamed buffer back to remote filename<".rfile."> : expand(%)<".expand("%").">)")
    let line1 = 1
    let line2 = line("$")
@@ -5003,12 +5006,12 @@ fun! s:NetrwBrowseChgDir(islocal,newdir,...)
       if g:netrw_chgwin >= 1
 "       call Decho("edit-a-file: changing window to #".g:netrw_chgwin.": (due to g:netrw_chgwin)",'~'.expand("<slnum>"))
        if winnr("$")+1 == g:netrw_chgwin
-	" if g:netrw_chgwin is set to one more than the last window, then
-	" vertically split the last window to make that window available.
-	let curwin= winnr()
-	exe "NetrwKeepj keepalt ".winnr("$")."wincmd w"
-	vs
-	exe "NetrwKeepj keepalt ".g:netrw_chgwin."wincmd ".curwin
+       " if g:netrw_chgwin is set to one more than the last window, then
+       " vertically split the last window to make that window available.
+       let curwin= winnr()
+       exe "NetrwKeepj keepalt ".winnr("$")."wincmd w"
+       vs
+       exe "NetrwKeepj keepalt ".g:netrw_chgwin."wincmd ".curwin
        endif
        exe "NetrwKeepj keepalt ".g:netrw_chgwin."wincmd w"
       endif
@@ -6127,7 +6130,7 @@ fun! s:NetrwServerEdit(islocal,fname)
        " used something like <cr>.
 "       call Decho("user must have closed server AND did not use ctrl-r",'~'.expand("<slnum>"))
        if exists("g:netrw_browse_split")
-	unlet g:netrw_browse_split
+        unlet g:netrw_browse_split
        endif
        let g:netrw_browse_split= 0
        if exists("s:netrw_browse_split_".winnr())
@@ -6161,7 +6164,7 @@ fun! s:NetrwServerEdit(islocal,fname)
       if !ctrlr
 "       call Decho("server<".g:netrw_servername."> not available and ctrl-r not used",'~'.expand("<slnum>"))
        if exists("g:netrw_browse_split")
-	unlet g:netrw_browse_split
+        unlet g:netrw_browse_split
        endif
        let g:netrw_browse_split= 0
        call s:NetrwBrowse(islocal,s:NetrwBrowseChgDir(islocal,a:fname))
@@ -6679,14 +6682,14 @@ fun! s:NetrwMaps(islocal)
     nmap <buffer>			<2-leftmouse>		<Plug>Netrw2Leftmouse
     imap <buffer>			<leftmouse>		<Plug>ILeftmouse
     imap <buffer>			<middlemouse>		<Plug>IMiddlemouse
-    nno  <buffer> <silent>		<Plug>NetrwLeftmouse	<leftmouse>:call <SID>NetrwLeftmouse(1)<cr>
-    nno  <buffer> <silent>		<Plug>NetrwCLeftmouse	<leftmouse>:call <SID>NetrwCLeftmouse(1)<cr>
-    nno  <buffer> <silent>		<Plug>NetrwMiddlemouse	<leftmouse>:call <SID>NetrwPrevWinOpen(1)<cr>
-    nno  <buffer> <silent>		<Plug>NetrwSLeftmouse 	<leftmouse>:call <SID>NetrwSLeftmouse(1)<cr>
-    nno  <buffer> <silent>		<Plug>NetrwSLeftdrag	<leftmouse>:call <SID>NetrwSLeftdrag(1)<cr>
+    nno  <buffer> <silent>		<Plug>NetrwLeftmouse	:exec "norm! \<lt>leftmouse>"<bar>call <SID>NetrwLeftmouse(1)<cr>
+    nno  <buffer> <silent>		<Plug>NetrwCLeftmouse	:exec "norm! \<lt>leftmouse>"<bar>call <SID>NetrwCLeftmouse(1)<cr>
+    nno  <buffer> <silent>		<Plug>NetrwMiddlemouse	:exec "norm! \<lt>leftmouse>"<bar>call <SID>NetrwPrevWinOpen(1)<cr>
+    nno  <buffer> <silent>		<Plug>NetrwSLeftmouse 	:exec "norm! \<lt>leftmouse>"<bar>call <SID>NetrwSLeftmouse(1)<cr>
+    nno  <buffer> <silent>		<Plug>NetrwSLeftdrag	:exec "norm! \<lt>leftmouse>"<bar>call <SID>NetrwSLeftdrag(1)<cr>
     nmap <buffer> <silent>		<Plug>Netrw2Leftmouse	-
-    exe 'nnoremap <buffer> <silent> <rightmouse>  <leftmouse>:call <SID>NetrwLocalRm("'.mapsafecurdir.'")<cr>'
-    exe 'vnoremap <buffer> <silent> <rightmouse>  <leftmouse>:call <SID>NetrwLocalRm("'.mapsafecurdir.'")<cr>'
+    exe 'nnoremap <buffer> <silent> <rightmouse>  :exec "norm! \<lt>leftmouse>"<bar>call <SID>NetrwLocalRm("'.mapsafecurdir.'")<cr>'
+    exe 'vnoremap <buffer> <silent> <rightmouse>  :exec "norm! \<lt>leftmouse>"<bar>call <SID>NetrwLocalRm("'.mapsafecurdir.'")<cr>'
    endif
    exe 'nnoremap <buffer> <silent> <nowait> <del>	:call <SID>NetrwLocalRm("'.mapsafecurdir.'")<cr>'
    exe 'nnoremap <buffer> <silent> <nowait> D		:call <SID>NetrwLocalRm("'.mapsafecurdir.'")<cr>'
@@ -6780,22 +6783,22 @@ fun! s:NetrwMaps(islocal)
    nnoremap <buffer> <silent> <Plug>NetrwRefresh	:call <SID>NetrwRefresh(0,<SID>NetrwBrowseChgDir(0,'./'))<cr>
    if g:netrw_mousemaps == 1
     nmap <buffer> <leftmouse>		<Plug>NetrwLeftmouse
-    nno  <buffer> <silent>		<Plug>NetrwLeftmouse	<leftmouse>:call <SID>NetrwLeftmouse(0)<cr>
+    nno  <buffer> <silent>		<Plug>NetrwLeftmouse	:exec "norm! \<lt>leftmouse>"<bar>call <SID>NetrwLeftmouse(0)<cr>
     nmap <buffer> <c-leftmouse>		<Plug>NetrwCLeftmouse
-    nno  <buffer> <silent>		<Plug>NetrwCLeftmouse	<leftmouse>:call <SID>NetrwCLeftmouse(0)<cr>
+    nno  <buffer> <silent>		<Plug>NetrwCLeftmouse	:exec "norm! \<lt>leftmouse>"<bar>call <SID>NetrwCLeftmouse(0)<cr>
     nmap <buffer> <s-leftmouse>		<Plug>NetrwSLeftmouse
-    nno  <buffer> <silent>		<Plug>NetrwSLeftmouse 	<leftmouse>:call <SID>NetrwSLeftmouse(0)<cr>
+    nno  <buffer> <silent>		<Plug>NetrwSLeftmouse 	:exec "norm! \<lt>leftmouse>"<bar>call <SID>NetrwSLeftmouse(0)<cr>
     nmap <buffer> <s-leftdrag>		<Plug>NetrwSLeftdrag
-    nno  <buffer> <silent>		<Plug>NetrwSLeftdrag	<leftmouse>:call <SID>NetrwSLeftdrag(0)<cr>
+    nno  <buffer> <silent>		<Plug>NetrwSLeftdrag	:exec "norm! \<lt>leftmouse>"<bar>call <SID>NetrwSLeftdrag(0)<cr>
     nmap <middlemouse>			<Plug>NetrwMiddlemouse
-    nno  <buffer> <silent>		<middlemouse>		<Plug>NetrwMiddlemouse <leftmouse>:call <SID>NetrwPrevWinOpen(0)<cr>
+    nno  <buffer> <silent>		<middlemouse>		<Plug>NetrwMiddlemouse :exec "norm! \<lt>leftmouse>"<bar>call <SID>NetrwPrevWinOpen(0)<cr>
     nmap <buffer> <2-leftmouse>		<Plug>Netrw2Leftmouse
     nmap <buffer> <silent>		<Plug>Netrw2Leftmouse	-
     imap <buffer> <leftmouse>		<Plug>ILeftmouse
     imap <buffer> <middlemouse>		<Plug>IMiddlemouse
     imap <buffer> <s-leftmouse>		<Plug>ISLeftmouse
-    exe 'nnoremap <buffer> <silent> <rightmouse> <leftmouse>:call <SID>NetrwRemoteRm("'.mapsafeusermach.'","'.mapsafepath.'")<cr>'
-    exe 'vnoremap <buffer> <silent> <rightmouse> <leftmouse>:call <SID>NetrwRemoteRm("'.mapsafeusermach.'","'.mapsafepath.'")<cr>'
+    exe 'nnoremap <buffer> <silent> <rightmouse> :exec "norm! \<lt>leftmouse>"<bar>call <SID>NetrwRemoteRm("'.mapsafeusermach.'","'.mapsafepath.'")<cr>'
+    exe 'vnoremap <buffer> <silent> <rightmouse> :exec "norm! \<lt>leftmouse>"<bar>call <SID>NetrwRemoteRm("'.mapsafeusermach.'","'.mapsafepath.'")<cr>'
    endif
    exe 'nnoremap <buffer> <silent> <nowait> <del>	:call <SID>NetrwRemoteRm("'.mapsafeusermach.'","'.mapsafepath.'")<cr>'
    exe 'nnoremap <buffer> <silent> <nowait> d		:call <SID>NetrwMakeDir("'.mapsafeusermach.'")<cr>'
@@ -7506,7 +7509,7 @@ fun! s:NetrwMarkFileExe(islocal,enbloc)
      for fname in s:netrwmarkfilelist_{curbufnr}
       if a:islocal
        if g:netrw_keepdir
-	let fname= s:ShellEscape(netrw#WinPath(s:ComposePath(curdir,fname)))
+        let fname= s:ShellEscape(netrw#WinPath(s:ComposePath(curdir,fname)))
        endif
       else
        let fname= s:ShellEscape(netrw#WinPath(b:netrw_curdir.fname))
@@ -7862,7 +7865,7 @@ fun! s:NetrwMarkFileMove(islocal)
      let movecmd     = netrw#WinPath(movecmd).movecmdargs
 "     call Decho("windows exception: movecmd<".movecmd."> (#1: had a space)",'~'.expand("<slnum>"))
     else
-     let movecmd = netrw#WinPath(movecmd)
+     let movecmd = netrw#WinPath(g:netrw_localmovecmd)
 "     call Decho("windows exception: movecmd<".movecmd."> (#2: no space)",'~'.expand("<slnum>"))
     endif
    else
@@ -7876,10 +7879,6 @@ fun! s:NetrwMarkFileMove(islocal)
     endif
     if !g:netrw_cygwin && (has("win32") || has("win95") || has("win64") || has("win16"))
      let fname= substitute(fname,'/','\\','g')
-     if g:netrw_keepdir
-      " Jul 19, 2022: fixing file move when g:netrw_keepdir is 1
-      let fname= b:netrw_curdir."\\".fname
-     endif
     endif
 "    call Decho("system(".movecmd." ".s:ShellEscape(fname)." ".tgt.")",'~'.expand("<slnum>"))
     let ret= system(movecmd.g:netrw_localmovecmdopt." ".s:ShellEscape(fname)." ".tgt)
@@ -9478,7 +9477,7 @@ fun! s:NetrwTreeDir(islocal)
 "    call Decho("treedir<".treedir.">",'~'.expand("<slnum>"))
    elseif curline =~ '@$'
 "    call Decho("handle symbolic link from current line",'~'.expand("<slnum>"))
-    let treedir= resolve(substitute(substitute(getline('.'),'@.*$','','e'),'^|*\s*','','e'))
+    let potentialdir= resolve(substitute(substitute(getline('.'),'@.*$','','e'),'^|*\s*','','e'))
 "    call Decho("treedir<".treedir.">",'~'.expand("<slnum>"))
    else
 "    call Decho("do not extract tree subdirectory from current line and set treedir to empty",'~'.expand("<slnum>"))
@@ -9503,7 +9502,6 @@ fun! s:NetrwTreeDir(islocal)
 "  call Decho("COMBAK#23 : mod=".&mod." win#".winnr())
 
 "   call Decho("islocal=".a:islocal." curline<".curline.">",'~'.expand("<slnum>"))
-   let potentialdir= s:NetrwFile(substitute(curline,'^'.s:treedepthstring.'\+ \(.*\)@$','\1',''))
 "   call Decho("potentialdir<".potentialdir."> isdir=".isdirectory(potentialdir),'~'.expand("<slnum>"))
 "  call Decho("COMBAK#24 : mod=".&mod." win#".winnr())
 
@@ -9516,8 +9514,15 @@ fun! s:NetrwTreeDir(islocal)
 " "   call Decho("newdir <".newdir.">",'~'.expand("<slnum>"))
 "   else
 "    call Decho("apply NetrwTreePath to treetop<".w:netrw_treetop.">",'~'.expand("<slnum>"))
-    let treedir = s:NetrwTreePath(w:netrw_treetop)
-"   endif
+    if a:islocal && curline =~ '@$'
+      if isdirectory(s:NetrwFile(potentialdir))
+        let treedir = w:netrw_treetop.'/'.potentialdir.'/'
+        let w:netrw_treetop = treedir
+      endif
+    else
+      let potentialdir= s:NetrwFile(substitute(curline,'^'.s:treedepthstring.'\+ \(.*\)@$','\1',''))
+      let treedir = s:NetrwTreePath(w:netrw_treetop)
+    endif
   endif
 "  call Decho("COMBAK#25 : mod=".&mod." win#".winnr())
 
@@ -10215,7 +10220,7 @@ fun! s:SetupNetrwStatusLine(statline)
   " set up status line (may use User9 highlighting)
   " insure that windows have a statusline
   " make sure statusline is displayed
-  let &stl=a:statline
+  let &l:stl=a:statline
   setl laststatus=2
 "  call Decho("stl=".&stl,'~'.expand("<slnum>"))
   redraw
@@ -10331,7 +10336,7 @@ fun! s:NetrwRemoteFtpCmd(path,listcmd)
    setl ff=unix
 
    " restore settings
-   let &ff= ffkeep
+   let &l:ff= ffkeep
 "   call Dret("NetrwRemoteFtpCmd")
    return
 
@@ -10368,7 +10373,7 @@ fun! s:NetrwRemoteFtpCmd(path,listcmd)
   endif
 
   " restore settings " {{{3
-  let &ff= ffkeep
+  let &l:ff= ffkeep
 "  call Dret("NetrwRemoteFtpCmd")
 endfun
 
@@ -10672,7 +10677,7 @@ fun! s:NetrwRemoteRmFile(path,rmfile,all)
       NetrwKeepj call netrw#ErrorMsg(s:ERROR,"for some reason b:netrw_curdir doesn't exist!",53)
       let ok="q"
      else
-      let remotedir= substitute(b:netrw_curdir,'^.*//[^/]\+/\(.*\)$','\1','')
+      let remotedir= substitute(b:netrw_curdir,'^.\{-}//[^/]\+/\(.*\)$','\1','')
 "      call Decho("netrw_rm_cmd<".netrw_rm_cmd.">",'~'.expand("<slnum>"))
 "      call Decho("remotedir<".remotedir.">",'~'.expand("<slnum>"))
 "      call Decho("rmfile<".a:rmfile.">",'~'.expand("<slnum>"))
@@ -10685,7 +10690,7 @@ fun! s:NetrwRemoteRmFile(path,rmfile,all)
       let ret= system(netrw_rm_cmd)
       if v:shell_error != 0
        if exists("b:netrw_curdir") && b:netrw_curdir != getcwd() && !g:netrw_keepdir
-	call netrw#ErrorMsg(s:ERROR,"remove failed; perhaps due to vim's current directory<".getcwd()."> not matching netrw's (".b:netrw_curdir.") (see :help netrw-cd)",102)
+        call netrw#ErrorMsg(s:ERROR,"remove failed; perhaps due to vim's current directory<".getcwd()."> not matching netrw's (".b:netrw_curdir.") (see :help netrw-cd)",102)
        else
         call netrw#ErrorMsg(s:WARNING,"cmd<".netrw_rm_cmd."> failed",60)
        endif
@@ -11193,16 +11198,16 @@ fun! s:LocalListing()
 "   call Decho("pfile   <".pfile.">",'~'.expand("<slnum>"))
 
    if w:netrw_liststyle == s:LONGLIST
-    let longfile= printf("%-".g:netrw_maxfilenamelen."S",pfile)
-    let sz   = getfsize(filename)
-	let szlen = 15 - (strdisplaywidth(longfile) - g:netrw_maxfilenamelen)
-    let szlen = (szlen > 0) ? szlen : 0
+    let longfile = printf("%-".g:netrw_maxfilenamelen."S",pfile)
+    let sz       = getfsize(filename)
+    let szlen    = 15 - (strdisplaywidth(longfile) - g:netrw_maxfilenamelen)
+    let szlen    = (szlen > 0) ? szlen : 0
 
     if g:netrw_sizestyle =~# "[hH]"
      let sz= s:NetrwHumanReadable(sz)
     endif
     let fsz  = printf("%".szlen."S",sz)
-    let pfile   = longfile."  ".fsz." ".strftime(g:netrw_timefmt,getftime(filename))
+    let pfile= longfile."  ".fsz." ".strftime(g:netrw_timefmt,getftime(filename))
 "    call Decho("longlist support: sz=".sz." fsz=".fsz,'~'.expand("<slnum>"))
    endif
 
@@ -11587,7 +11592,7 @@ endfun
 "  netrw#RFC2396: converts %xx into characters {{{2
 fun! netrw#RFC2396(fname)
 "  call Dfunc("netrw#RFC2396(fname<".a:fname.">)")
-  let fname = escape(substitute(a:fname,'%\(\x\x\)','\=nr2char("0x".submatch(1))','ge')," \t")
+  let fname = escape(substitute(a:fname,'%\(\x\x\)','\=printf("%c","0x".submatch(1))','ge')," \t")
 "  call Dret("netrw#RFC2396 ".fname)
   return fname
 endfun
@@ -12222,7 +12227,7 @@ fun! s:NetrwLcd(newdir)
      if (has("win32") || has("win95") || has("win64") || has("win16")) && !g:netrw_cygwin
        if a:newdir =~ '^\\\\\w\+' || a:newdir =~ '^//\w\+'
          let dirname = '\'
-	 exe 'NetrwKeepj sil lcd '.fnameescape(dirname)
+         exe 'NetrwKeepj sil lcd '.fnameescape(dirname)
        endif
      endif
   catch /^Vim\%((\a\+)\)\=:E472/

runtime/autoload/netrwFileHandlers.vim

@@ -1,6 +1,7 @@
 " netrwFileHandlers: contains various extension-based file handlers for
 "                    netrw's browsers' x command ("eXecute launcher")
-" Author:	Charles E. Campbell
+" Maintainer: This runtime file is looking for a new maintainer.
+" Original Author: Charles E. Campbell
 " Date:		Sep 18, 2020
 " Version:	11
 " Copyright:    Copyright (C) 1999-2012 Charles E. Campbell {{{1

runtime/autoload/netrwSettings.vim

@@ -1,6 +1,7 @@
 " netrwSettings.vim: makes netrw settings simpler
 " Date:		Nov 15, 2021
-" Maintainer:	Charles E Campbell <NcampObell@SdrPchip.AorgM-NOSPAM>
+" Maintainer:   This runtime file is looking for a new maintainer.
+" Former Maintainer: Charles E Campbell
 " Version:	18
 " Copyright:    Copyright (C) 1999-2007 Charles E. Campbell {{{1
 "               Permission is hereby granted to use and distribute this code,

runtime/autoload/tar.vim

@@ -2,7 +2,8 @@
 "            AUTOLOAD PORTION
 " Date:		Nov 14, 2023
 " Version:	32b  (with modifications from the Vim Project)
-" Maintainer:	Charles E Campbell <NcampObell@SdrPchip.AorgM-NOSPAM>
+" Maintainer:	This runtime file is looking for a new maintainer.
+" Former Maintainer: Charles E Campbell
 " License:	Vim License  (see vim's :help license)
 "
 "	Contains many ideas from Michael Toren's <tar.vim>
@@ -163,9 +164,9 @@ fun! tar#Browse(tarfile)
 "   call Decho("1: exe silent r! gzip -d -c -- ".shellescape(tarfile,1)." | ".g:tar_cmd." -".g:tar_browseoptions." - ")
    exe "sil! r! gzip -d -c -- ".shellescape(tarfile,1)." | ".g:tar_cmd." -".g:tar_browseoptions." - "
 
-  elseif tarfile =~# '\.\(tgz\)$' || tarfile =~# '\.\(tbz\)$' || tarfile =~# '\.\(txz\)$' || tarfile =~# '\.\(tzs\)$'
+  elseif tarfile =~# '\.\(tgz\)$' || tarfile =~# '\.\(tbz\)$' || tarfile =~# '\.\(txz\)$' || tarfile =~# '\.\(tzst\)$'
    if has("unix") && executable("file")
-    let filekind= system("file ".shellescape(tarfile,1)) =~ "bzip2"
+    let filekind= system("file ".shellescape(tarfile,1))
    else
     let filekind= ""
    endif
@@ -192,7 +193,7 @@ fun! tar#Browse(tarfile)
   elseif tarfile =~# '\.\(xz\|txz\)$'
 "   call Decho("3: exe silent r! xz --decompress --stdout -- ".shellescape(tarfile,1)." | ".g:tar_cmd." -".g:tar_browseoptions." - ")
    exe "sil! r! xz --decompress --stdout -- ".shellescape(tarfile,1)." | ".g:tar_cmd." -".g:tar_browseoptions." - "
-  elseif tarfile =~# '\.\(zst\|tzs\)$'
+  elseif tarfile =~# '\.\(zst\|tzst\)$'
    exe "sil! r! zstd --decompress --stdout -- ".shellescape(tarfile,1)." | ".g:tar_cmd." -".g:tar_browseoptions." - "
   else
    if tarfile =~ '^\s*-'
@@ -230,7 +231,7 @@ fun! tar#Browse(tarfile)
   " set up maps supported for tar
   setlocal noma nomod ro
   noremap <silent> <buffer>	<cr>		:call <SID>TarBrowseSelect()<cr>
-  noremap <silent> <buffer>	x	 	:call tar#Extract()<cr>       
+  noremap <silent> <buffer>	x	 	:call tar#Extract()<cr>
   if &mouse != ""
    noremap <silent> <buffer>	<leftmouse>	<leftmouse>:call <SID>TarBrowseSelect()<cr>
   endif
@@ -468,9 +469,9 @@ fun! tar#Write(fname)
    let compress= "xz -- ".shellescape(tarfile,0)
 "   call Decho("compress<".compress.">")
   elseif tarfile =~# '\.zst'
-   call system("zstd --decompress -- ".shellescape(tarfile,0))
+   call system("zstd --decompress --rm -- ".shellescape(tarfile,0))
    let tarfile = substitute(tarfile,'\.zst','','e')
-   let compress= "zstd -- ".shellescape(tarfile,0)
+   let compress= "zstd --rm -- ".shellescape(tarfile,0)
   elseif tarfile =~# '\.lzma'
    call system("lzma -d -- ".shellescape(tarfile,0))
    let tarfile = substitute(tarfile,'\.lzma','','e')
@@ -486,7 +487,7 @@ fun! tar#Write(fname)
   else
 
 "   call Decho("tarfile<".tarfile."> fname<".fname.">")
- 
+
    if fname =~ '/'
     let dirpath = substitute(fname,'/[^/]\+$','','e')
     if has("win32unix") && executable("cygpath")
@@ -502,7 +503,7 @@ fun! tar#Write(fname)
     let tarfile = substitute(tarfile, '-', './-', '')
    endif
 "   call Decho("tarfile<".tarfile."> fname<".fname.">")
- 
+
    if exists("g:tar_secure")
     let tar_secure= " -- "
    else
@@ -512,7 +513,7 @@ fun! tar#Write(fname)
    if has("win32unix") && executable("cygpath")
     let tarfile = substitute(system("cygpath ".shellescape(tarfile,0)),'\n','','e')
    endif
- 
+
    " delete old file from tarfile
 "   call Decho("system(".g:tar_cmd." ".g:tar_delfile." ".shellescape(tarfile,0)." -- ".shellescape(fname,0).")")
    call system(g:tar_cmd." ".g:tar_delfile." ".shellescape(tarfile,0).tar_secure.shellescape(fname,0))
@@ -521,8 +522,8 @@ fun! tar#Write(fname)
 "    call Decho("***error*** (tar#Write) sorry, unable to update ".fnameescape(tarfile)." with ".fnameescape(fname))
     echohl Error | echo "***error*** (tar#Write) sorry, unable to update ".fnameescape(tarfile)." with ".fnameescape(fname) | echohl None
    else
- 
-    " update tarfile with new file 
+
+    " update tarfile with new file
 "    call Decho(g:tar_cmd." -".g:tar_writeoptions." ".shellescape(tarfile,0).tar_secure.shellescape(fname,0))
     call system(g:tar_cmd." -".g:tar_writeoptions." ".shellescape(tarfile,0).tar_secure.shellescape(fname,0))
     if v:shell_error != 0
@@ -555,7 +556,7 @@ fun! tar#Write(fname)
     unlet s:tblfile_{winnr()}
    endif
   endif
-  
+
   " cleanup and restore current directory
   cd ..
   call s:Rmdir("_ZIPVIM_")
@@ -696,13 +697,13 @@ fun! tar#Extract()
     echo "***note*** successfully extracted ".fname
    endif
 
-  elseif filereadable(tarbase.".tzs")
+  elseif filereadable(tarbase.".tzst")
    let extractcmd= substitute(extractcmd,"-","--zstd","")
-"   call Decho("system(".extractcmd." ".shellescape(tarbase).".tzs ".shellescape(fname).")")
-   call system(extractcmd." ".shellescape(tarbase).".txz ".shellescape(fname))
+"   call Decho("system(".extractcmd." ".shellescape(tarbase).".tzst ".shellescape(fname).")")
+   call system(extractcmd." ".shellescape(tarbase).".tzst ".shellescape(fname))
    if v:shell_error != 0
-    echohl Error | echo "***error*** ".extractcmd." ".tarbase.".tzs ".fname.": failed!" | echohl NONE
-"    call Decho("***error*** ".extractcmd." ".tarbase.".tzs ".fname.": failed!")
+    echohl Error | echo "***error*** ".extractcmd." ".tarbase.".tzst ".fname.": failed!" | echohl NONE
+"    call Decho("***error*** ".extractcmd." ".tarbase.".tzst ".fname.": failed!")
    else
     echo "***note*** successfully extracted ".fname
    endif
@@ -710,7 +711,7 @@ fun! tar#Extract()
   elseif filereadable(tarbase.".tar.zst")
    let extractcmd= substitute(extractcmd,"-","--zstd","")
 "   call Decho("system(".extractcmd." ".shellescape(tarbase).".tar.zst ".shellescape(fname).")")
-   call system(extractcmd." ".shellescape(tarbase).".tar.xz ".shellescape(fname))
+   call system(extractcmd." ".shellescape(tarbase).".tar.zst ".shellescape(fname))
    if v:shell_error != 0
     echohl Error | echo "***error*** ".extractcmd." ".tarbase.".tar.zst ".fname.": failed!" | echohl NONE
 "    call Decho("***error*** ".extractcmd." ".tarbase.".tar.zst ".fname.": failed!")

runtime/autoload/vimball.vim

@@ -1,6 +1,7 @@
 " vimball.vim : construct a file containing both paths and files
-" Author:	Charles E. Campbell
-" Date:		Apr 11, 2016
+" Maintainer: This runtime file is looking for a new maintainer.
+" Original Author:	Charles E. Campbell
+" Date:			Apr 11, 2016
 " Version:	37
 " GetLatestVimScripts: 1502 1 :AutoInstall: vimball.vim
 " Copyright: (c) 2004-2011 by Charles E. Campbell

runtime/autoload/zip.vim

@@ -2,7 +2,8 @@
 "            AUTOLOAD PORTION
 " Date:		Mar 12, 2023
 " Version:	33
-" Maintainer:	Charles E Campbell <NcampObell@SdrPchip.AorgM-NOSPAM>
+" Maintainer:	This runtime file is looking for a new maintainer.
+" Former Maintainer:	Charles E Campbell
 " License:	Vim License  (see vim's :help license)
 " Copyright:    Copyright (C) 2005-2019 Charles E. Campbell {{{1
 "               Permission is hereby granted to use and distribute this code,

runtime/colors/blue.vim

@@ -4,7 +4,7 @@
 " Maintainer:   Original maintainer Steven Vertigan <steven@vertigan.wattle.id.au>
 " Website:      https://github.com/vim/colorschemes
 " License:      Same as Vim
-" Last Updated: Fri 15 Dec 2023 20:05:33
+" Last Updated: Mon 08 Jan 2024 09:42:49 AM AEDT
 
 " Generated by Colortemplate v2.2.3
 
@@ -76,8 +76,8 @@ hi Underlined guifg=NONE guibg=NONE gui=underline ctermfg=NONE ctermbg=NONE cter
 hi Label guifg=#ffd700 guibg=NONE gui=NONE cterm=NONE
 hi! link Terminal Normal
 hi! link Debug Special
-hi! link diffAdded String
-hi! link diffRemoved WarningMsg
+hi! link Added String
+hi! link Removed WarningMsg
 hi! link diffOnly WarningMsg
 hi! link diffNoEOL WarningMsg
 hi! link diffIsA WarningMsg
@@ -186,8 +186,8 @@ if s:t_Co >= 256
   hi Label ctermfg=220 ctermbg=NONE cterm=NONE
   hi! link Terminal Normal
   hi! link Debug Special
-  hi! link diffAdded String
-  hi! link diffRemoved WarningMsg
+  hi! link Added String
+  hi! link Removed WarningMsg
   hi! link diffOnly WarningMsg
   hi! link diffNoEOL WarningMsg
   hi! link diffIsA WarningMsg
@@ -299,8 +299,8 @@ if s:t_Co >= 16
   hi Label ctermfg=yellow ctermbg=NONE cterm=NONE
   hi! link Terminal Normal
   hi! link Debug Special
-  hi! link diffAdded String
-  hi! link diffRemoved WarningMsg
+  hi! link Added String
+  hi! link Removed WarningMsg
   hi! link diffOnly WarningMsg
   hi! link diffNoEOL WarningMsg
   hi! link diffIsA WarningMsg
@@ -411,8 +411,8 @@ if s:t_Co >= 8
   hi Label ctermfg=yellow ctermbg=NONE cterm=NONE
   hi! link Terminal Normal
   hi! link Debug Special
-  hi! link diffAdded String
-  hi! link diffRemoved WarningMsg
+  hi! link Added String
+  hi! link Removed WarningMsg
   hi! link diffOnly WarningMsg
   hi! link diffNoEOL WarningMsg
   hi! link diffIsA WarningMsg

runtime/colors/darkblue.vim

@@ -4,7 +4,7 @@
 " Maintainer:   Original author Bohdan Vlasyuk <bohdan@vstu.edu.ua>
 " Website:      https://github.com/vim/colorschemes
 " License:      Same as Vim
-" Last Updated: Fri 15 Dec 2023 20:05:33
+" Last Updated: Mon 08 Jan 2024 09:43:03 AM AEDT
 
 " Generated by Colortemplate v2.2.3
 
@@ -54,8 +54,8 @@ hi! link Structure Type
 hi! link Tag Special
 hi! link Typedef Type
 hi! link Debug Special
-hi! link diffAdded String
-hi! link diffRemoved WarningMsg
+hi! link Added String
+hi! link Removed WarningMsg
 hi! link diffOnly WarningMsg
 hi! link diffNoEOL WarningMsg
 hi! link diffIsA WarningMsg
@@ -162,8 +162,8 @@ if s:t_Co >= 256
   hi! link Tag Special
   hi! link Typedef Type
   hi! link Debug Special
-  hi! link diffAdded String
-  hi! link diffRemoved WarningMsg
+  hi! link Added String
+  hi! link Removed WarningMsg
   hi! link diffOnly WarningMsg
   hi! link diffNoEOL WarningMsg
   hi! link diffIsA WarningMsg

runtime/colors/evening.vim

@@ -4,7 +4,7 @@
 " Maintainer:   Original maintainer Steven Vertigan <steven@vertigan.wattle.id.au>
 " Website:      https://github.com/vim/colorschemes
 " License:      Same as Vim
-" Last Updated: Fri 15 Dec 2023 20:05:35
+" Last Updated: Mon 08 Jan 2024 09:43:27 AM AEDT
 
 " Generated by Colortemplate v2.2.3
 
@@ -28,8 +28,8 @@ hi! link CursorIM Cursor
 hi! link LineNrAbove LineNr
 hi! link LineNrBelow LineNr
 hi! link Debug Special
-hi! link diffAdded String
-hi! link diffRemoved WarningMsg
+hi! link Added String
+hi! link Removed WarningMsg
 hi! link diffOnly WarningMsg
 hi! link diffNoEOL WarningMsg
 hi! link diffIsA WarningMsg
@@ -136,8 +136,8 @@ if s:t_Co >= 256
   hi! link LineNrAbove LineNr
   hi! link LineNrBelow LineNr
   hi! link Debug Special
-  hi! link diffAdded String
-  hi! link diffRemoved WarningMsg
+  hi! link Added String
+  hi! link Removed WarningMsg
   hi! link diffOnly WarningMsg
   hi! link diffNoEOL WarningMsg
   hi! link diffIsA WarningMsg
@@ -247,8 +247,8 @@ if s:t_Co >= 16
   hi! link LineNrAbove LineNr
   hi! link LineNrBelow LineNr
   hi! link Debug Special
-  hi! link diffAdded String
-  hi! link diffRemoved WarningMsg
+  hi! link Added String
+  hi! link Removed WarningMsg
   hi! link diffOnly WarningMsg
   hi! link diffNoEOL WarningMsg
   hi! link diffIsA WarningMsg

runtime/colors/habamax.vim

@@ -4,7 +4,7 @@
 " Maintainer:   Maxim Kim <habamax@gmail.com>
 " Website:      https://github.com/vim/colorschemes
 " License:      Same as Vim
-" Last Updated: Fri 15 Dec 2023 20:05:35
+" Last Updated: Mon 08 Jan 2024 09:39:53 AM AEDT
 
 " Generated by Colortemplate v2.2.3
 
@@ -106,8 +106,9 @@ hi Ignore guifg=NONE guibg=NONE gui=NONE ctermfg=NONE ctermbg=NONE cterm=NONE
 hi Debug guifg=#5f8787 guibg=NONE gui=NONE cterm=NONE
 hi DiffAdd guifg=#dadada guibg=#5f875f gui=NONE cterm=NONE
 hi DiffDelete guifg=#af875f guibg=NONE gui=NONE cterm=NONE
-hi diffAdded guifg=#87af87 guibg=NONE gui=NONE cterm=NONE
-hi diffRemoved guifg=#d75f5f guibg=NONE gui=NONE cterm=NONE
+hi Added guifg=#87af87 guibg=NONE gui=NONE cterm=NONE
+hi Changed guifg=#5f8787 guibg=NONE gui=NONE cterm=NONE
+hi Removed guifg=#d75f5f guibg=NONE gui=NONE cterm=NONE
 hi diffSubname guifg=#af87af guibg=NONE gui=NONE cterm=NONE
 hi DiffText guifg=#dadada guibg=#878787 gui=NONE cterm=NONE
 hi DiffChange guifg=#bcbcbc guibg=#5f5f5f gui=NONE cterm=NONE
@@ -199,8 +200,9 @@ if s:t_Co >= 256
   hi Debug ctermfg=66 ctermbg=NONE cterm=NONE
   hi DiffAdd ctermfg=253 ctermbg=65 cterm=NONE
   hi DiffDelete ctermfg=137 ctermbg=NONE cterm=NONE
-  hi diffAdded ctermfg=108 ctermbg=NONE cterm=NONE
-  hi diffRemoved ctermfg=167 ctermbg=NONE cterm=NONE
+  hi Added ctermfg=108 ctermbg=NONE cterm=NONE
+  hi Changed ctermfg=66 ctermbg=NONE cterm=NONE
+  hi Removed ctermfg=167 ctermbg=NONE cterm=NONE
   hi diffSubname ctermfg=139 ctermbg=NONE cterm=NONE
   hi DiffText ctermfg=253 ctermbg=102 cterm=NONE
   hi DiffChange ctermfg=250 ctermbg=59 cterm=NONE
@@ -277,8 +279,9 @@ if s:t_Co >= 16
   hi Debug ctermfg=darkcyan ctermbg=NONE cterm=NONE
   hi DiffAdd ctermfg=white ctermbg=darkgreen cterm=NONE
   hi DiffDelete ctermfg=darkyellow ctermbg=NONE cterm=NONE
-  hi diffAdded ctermfg=darkgreen ctermbg=NONE cterm=NONE
-  hi diffRemoved ctermfg=darkred ctermbg=NONE cterm=NONE
+  hi Added ctermfg=darkgreen ctermbg=NONE cterm=NONE
+  hi Changed ctermfg=darkcyan ctermbg=NONE cterm=NONE
+  hi Removed ctermfg=darkred ctermbg=NONE cterm=NONE
   hi diffSubname ctermfg=darkmagenta ctermbg=NONE cterm=NONE
   hi DiffText ctermfg=white ctermbg=lightgrey cterm=NONE
   hi DiffChange ctermfg=white ctermbg=darkgray cterm=NONE
@@ -355,8 +358,9 @@ if s:t_Co >= 8
   hi Debug ctermfg=darkcyan ctermbg=NONE cterm=NONE
   hi DiffAdd ctermfg=white ctermbg=darkgreen cterm=NONE
   hi DiffDelete ctermfg=darkyellow ctermbg=NONE cterm=NONE
-  hi diffAdded ctermfg=darkgreen ctermbg=NONE cterm=NONE
-  hi diffRemoved ctermfg=darkred ctermbg=NONE cterm=NONE
+  hi Added ctermfg=darkgreen ctermbg=NONE cterm=NONE
+  hi Changed ctermfg=darkcyan ctermbg=NONE cterm=NONE
+  hi Removed ctermfg=darkred ctermbg=NONE cterm=NONE
   hi diffSubname ctermfg=darkmagenta ctermbg=NONE cterm=NONE
   hi DiffText ctermfg=white ctermbg=black cterm=bold,reverse
   hi DiffChange ctermfg=black ctermbg=white cterm=NONE

runtime/colors/lists/csscolors.vim

@@ -4,6 +4,9 @@
 " Similar in spirit to rgb.txt, this plugin establishes a human-friendly name
 " for every color listed in the CSS standard:
 "
+" Note: the color names should be in lower case, because Vim will lookup the
+" a color by its lower case name.
+"
 " https://www.w3.org/TR/css-color-3/
 
 let s:keepcpo= &cpo
@@ -26,7 +29,6 @@ call extend(v:colornames, {
 			\ 'css_blue': '#0000FF',
 			\ 'css_teal': '#008080',
 			\ 'css_aqua': '#00FFFF',
-			\
 			\ 'css_aliceblue': '#f0f8ff',
 			\ 'css_antiquewhite': '#faebd7',
 			\ 'css_aquamarine': '#7fffd4',
@@ -160,6 +162,14 @@ call extend(v:colornames, {
 			\ 'css_yellowgreen': '#9acd32',
 			\ }, 'keep')
 
+" all keys should be in lower case, convert keys that are not yet
+for [key, val] in items(filter(copy(v:colornames), { key -> key  =~ '\u'}))
+  call remove(v:colornames, key)
+  if !has_key(v:colornames, tolower(key))
+    call extend(v:colornames, {tolower(key): val}, 'keep')
+  endif
+endfor
+
 let &cpo= s:keepcpo
 unlet s:keepcpo
 

runtime/colors/lists/default.vim

@@ -1,17 +1,50 @@
 " Maintainer:  Drew Vogel <dvogel@sidejump.org>
-" Last Change: 2023 Apr 19
+" Last Change: 2024 Mar 20
 "
 " Replaced rgb.txt as the source of de facto standard color names. This is
 " sourced each time the colorscheme command is run. It is also sourced each
 " time the highlight command fails to recognize a gui color. You can override
 " these colors by introducing a new colors/lists/default.vim file earlier in
 " the runtimepath.
+" Note: the color names should be in lower case, because Vim will lookup the
+" a color by its lower case name.
 
 " make sure line continuation works
 let s:keepcpo = &cpo
 set cpo&vim
 
-call extend(v:colornames, {
+function! s:Cleanup()
+  let &cpo = s:keepcpo
+  unlet s:keepcpo
+endfunction
+
+function! s:AddColors(cnames) abort
+  call extend(v:colornames, a:cnames, 'keep')
+
+  " all keys should be in lower case, convert keys that are not yet
+  let len_after = len(v:colornames)
+  if len_after == len(a:cnames)
+    " after extend(): v:colornames has all the keys of default_cnames
+    " checked: v:colornames also has no extra keys
+    " => keys are the same, and keys(default_cnames) are known to be ok
+    return
+  endif
+
+  for [key, val] in items(filter(copy(v:colornames), { key -> key  =~ '\u'}))
+    call remove(v:colornames, key)
+    if !has_key(v:colornames, tolower(key))
+      call extend(v:colornames, {tolower(key): val}, 'keep')
+    endif
+  endfor
+endfunction
+
+if exists('s:default_cnames')
+  call s:AddColors(s:default_cnames)
+  call s:Cleanup()
+  finish
+endif
+
+let s:default_cnames = {
 			\ 'snow': '#fffafa',
 			\ 'ghost white': '#f8f8ff',
 			\ 'ghostwhite': '#f8f8ff',
@@ -800,9 +833,9 @@ call extend(v:colornames, {
 			\ 'rebeccapurple': '#663399',
 			\ 'silver': '#c0c0c0',
 			\ 'teal': '#008080'
-			\ }, 'keep')
+			\ }
 
-let &cpo = s:keepcpo
-unlet s:keepcpo
+call s:AddColors(s:default_cnames)
+call s:Cleanup()
 
 "vim: sw=4

runtime/colors/lunaperche.vim

@@ -4,7 +4,7 @@
 " Maintainer:   Maxim Kim <habamax@gmail.com>
 " Website:      https://www.github.com/vim/colorschemes
 " License:      Vim License (see `:help license`)
-" Last Updated: Fri 15 Dec 2023 20:05:37
+" Last Updated: Mon 08 Jan 2024 09:41:03 AM AEDT
 
 " Generated by Colortemplate v2.2.3
 
@@ -164,8 +164,9 @@ if &background ==# 'dark'
   hi DiffChange guifg=#c6c6c6 guibg=#5f5f5f gui=NONE cterm=NONE
   hi DiffText guifg=#afffff guibg=#5f8787 gui=NONE cterm=NONE
   hi DiffDelete guifg=#d78787 guibg=NONE gui=NONE cterm=NONE
-  hi diffAdded guifg=#5fd75f guibg=NONE gui=NONE cterm=NONE
-  hi diffRemoved guifg=#d78787 guibg=NONE gui=NONE cterm=NONE
+  hi Added guifg=#5fd75f guibg=NONE gui=NONE cterm=NONE
+  hi Changed guifg=#5fafff guibg=NONE gui=NONE cterm=NONE
+  hi Removed guifg=#d78787 guibg=NONE gui=NONE cterm=NONE
   hi diffSubname guifg=#ff87ff guibg=NONE gui=NONE cterm=NONE
   hi dirType guifg=#d787d7 guibg=NONE gui=NONE cterm=NONE
   hi dirPermissionUser guifg=#5faf5f guibg=NONE gui=NONE cterm=NONE
@@ -254,8 +255,9 @@ else
   hi DiffChange guifg=#000000 guibg=#d0d0d0 gui=NONE cterm=NONE
   hi DiffText guifg=#000000 guibg=#5fd7d7 gui=NONE cterm=NONE
   hi DiffDelete guifg=#870000 guibg=NONE gui=NONE cterm=NONE
-  hi diffAdded guifg=#008700 guibg=NONE gui=NONE cterm=NONE
-  hi diffRemoved guifg=#d70000 guibg=NONE gui=NONE cterm=NONE
+  hi Added guifg=#008700 guibg=NONE gui=NONE cterm=NONE
+  hi Changed guifg=#005fd7 guibg=NONE gui=NONE cterm=NONE
+  hi Removed guifg=#d70000 guibg=NONE gui=NONE cterm=NONE
   hi diffSubname guifg=#af00af guibg=NONE gui=NONE cterm=NONE
   hi dirType guifg=#005f5f guibg=NONE gui=NONE cterm=NONE
   hi dirPermissionUser guifg=#af5f00 guibg=NONE gui=NONE cterm=NONE
@@ -421,8 +423,9 @@ if s:t_Co >= 256
     hi DiffChange ctermfg=251 ctermbg=59 cterm=NONE
     hi DiffText ctermfg=159 ctermbg=66 cterm=NONE
     hi DiffDelete ctermfg=174 ctermbg=NONE cterm=NONE
-    hi diffAdded ctermfg=77 ctermbg=NONE cterm=NONE
-    hi diffRemoved ctermfg=174 ctermbg=NONE cterm=NONE
+    hi Added ctermfg=77 ctermbg=NONE cterm=NONE
+    hi Changed ctermfg=75 ctermbg=NONE cterm=NONE
+    hi Removed ctermfg=174 ctermbg=NONE cterm=NONE
     hi diffSubname ctermfg=213 ctermbg=NONE cterm=NONE
     hi dirType ctermfg=176 ctermbg=NONE cterm=NONE
     hi dirPermissionUser ctermfg=71 ctermbg=NONE cterm=NONE
@@ -506,8 +509,9 @@ if s:t_Co >= 256
     hi DiffChange ctermfg=16 ctermbg=252 cterm=NONE
     hi DiffText ctermfg=16 ctermbg=80 cterm=NONE
     hi DiffDelete ctermfg=88 ctermbg=NONE cterm=NONE
-    hi diffAdded ctermfg=28 ctermbg=NONE cterm=NONE
-    hi diffRemoved ctermfg=160 ctermbg=NONE cterm=NONE
+    hi Added ctermfg=28 ctermbg=NONE cterm=NONE
+    hi Changed ctermfg=26 ctermbg=NONE cterm=NONE
+    hi Removed ctermfg=160 ctermbg=NONE cterm=NONE
     hi diffSubname ctermfg=127 ctermbg=NONE cterm=NONE
     hi dirType ctermfg=23 ctermbg=NONE cterm=NONE
     hi dirPermissionUser ctermfg=130 ctermbg=NONE cterm=NONE
@@ -596,8 +600,9 @@ if s:t_Co >= 16
     hi DiffChange ctermfg=white ctermbg=darkgreen cterm=NONE
     hi DiffText ctermfg=black ctermbg=cyan cterm=NONE
     hi DiffDelete ctermfg=darkred ctermbg=NONE cterm=NONE
-    hi diffAdded ctermfg=green ctermbg=NONE cterm=NONE
-    hi diffRemoved ctermfg=darkred ctermbg=NONE cterm=NONE
+    hi Added ctermfg=green ctermbg=NONE cterm=NONE
+    hi Changed ctermfg=blue ctermbg=NONE cterm=NONE
+    hi Removed ctermfg=darkred ctermbg=NONE cterm=NONE
     hi diffSubname ctermfg=magenta ctermbg=NONE cterm=NONE
     hi dirType ctermfg=darkmagenta ctermbg=NONE cterm=NONE
     hi dirPermissionUser ctermfg=darkgreen ctermbg=NONE cterm=NONE
@@ -681,8 +686,9 @@ if s:t_Co >= 16
     hi DiffChange ctermfg=black ctermbg=lightgray cterm=NONE
     hi DiffText ctermfg=black ctermbg=cyan cterm=NONE
     hi DiffDelete ctermfg=darkred ctermbg=NONE cterm=NONE
-    hi diffAdded ctermfg=darkgreen ctermbg=NONE cterm=NONE
-    hi diffRemoved ctermfg=red ctermbg=NONE cterm=NONE
+    hi Added ctermfg=darkgreen ctermbg=NONE cterm=NONE
+    hi Changed ctermfg=darkblue ctermbg=NONE cterm=NONE
+    hi Removed ctermfg=red ctermbg=NONE cterm=NONE
     hi diffSubname ctermfg=darkmagenta ctermbg=NONE cterm=NONE
     hi dirType ctermfg=darkcyan ctermbg=NONE cterm=NONE
     hi dirPermissionUser ctermfg=darkyellow ctermbg=NONE cterm=NONE

runtime/colors/murphy.vim

@@ -4,7 +4,7 @@
 " Maintainer:   Original maintainer Ron Aaron <ron@ronware.org>.
 " Website:      https://github.com/vim/colorschemes
 " License:      Same as Vim
-" Last Updated: Fri 15 Dec 2023 20:05:38
+" Last Updated: Mon 08 Jan 2024 09:50:15 AM AEDT
 
 " Generated by Colortemplate v2.2.3
 
@@ -28,6 +28,7 @@ hi! link StatusLineTerm StatusLine
 hi! link StatusLineTermNC StatusLineNC
 hi! link MessageWindow Pmenu
 hi! link PopupNotification Todo
+hi! link Added Constant
 hi Normal guifg=#87ff87 guibg=#000000 gui=NONE cterm=NONE
 hi EndOfBuffer guifg=#0000ff guibg=#000000 gui=NONE cterm=NONE
 hi StatusLine guifg=#ffffff guibg=#00008b gui=NONE cterm=NONE
@@ -100,6 +101,7 @@ if s:t_Co >= 256
   hi! link StatusLineTermNC StatusLineNC
   hi! link MessageWindow Pmenu
   hi! link PopupNotification Todo
+  hi! link Added Constant
   hi Normal ctermfg=120 ctermbg=16 cterm=NONE
   hi EndOfBuffer ctermfg=21 ctermbg=16 cterm=NONE
   hi StatusLine ctermfg=231 ctermbg=18 cterm=NONE

runtime/colors/wildcharm.vim

@@ -4,7 +4,7 @@
 " Maintainer:   Maxim Kim <habamax@gmail.com>
 " Website:      https://github.com/vim/colorschemes
 " License:      Same as Vim
-" Last Updated: Fri 15 Dec 2023 20:05:43
+" Last Updated: Mon 08 Jan 2024 09:40:36 AM AEDT
 
 " Generated by Colortemplate v2.2.3
 
@@ -93,8 +93,9 @@ if &background ==# 'dark'
   hi DiffChange guifg=#d0d0d0 guibg=#5f5f5f gui=NONE cterm=NONE
   hi DiffText guifg=#afffff guibg=#5f8787 gui=NONE cterm=NONE
   hi DiffDelete guifg=#ffafaf guibg=#875f5f gui=NONE cterm=NONE
-  hi diffAdded guifg=#00af5f guibg=NONE gui=NONE cterm=NONE
-  hi diffRemoved guifg=#d7005f guibg=NONE gui=NONE cterm=NONE
+  hi Added guifg=#00af5f guibg=NONE gui=NONE cterm=NONE
+  hi Changed guifg=#0087d7 guibg=NONE gui=NONE cterm=NONE
+  hi Removed guifg=#d7005f guibg=NONE gui=NONE cterm=NONE
 else
   " Light background
   if (has('termguicolors') && &termguicolors) || has('gui_running')
@@ -167,8 +168,9 @@ else
   hi DiffChange guifg=#262626 guibg=#dadada gui=NONE cterm=NONE
   hi DiffText guifg=#005f5f guibg=#afd7d7 gui=NONE cterm=NONE
   hi DiffDelete guifg=#875f5f guibg=#ffd7d7 gui=NONE cterm=NONE
-  hi diffAdded guifg=#008700 guibg=NONE gui=NONE cterm=NONE
-  hi diffRemoved guifg=#d70000 guibg=NONE gui=NONE cterm=NONE
+  hi Added guifg=#5faf5f guibg=NONE gui=NONE cterm=NONE
+  hi Changed guifg=#0087d7 guibg=NONE gui=NONE cterm=NONE
+  hi Removed guifg=#d70000 guibg=NONE gui=NONE cterm=NONE
 endif
 
 if s:t_Co >= 256
@@ -247,8 +249,9 @@ if s:t_Co >= 256
     hi DiffChange ctermfg=252 ctermbg=59 cterm=NONE
     hi DiffText ctermfg=159 ctermbg=66 cterm=NONE
     hi DiffDelete ctermfg=217 ctermbg=95 cterm=NONE
-    hi diffAdded ctermfg=35 ctermbg=NONE cterm=NONE
-    hi diffRemoved ctermfg=161 ctermbg=NONE cterm=NONE
+    hi Added ctermfg=35 ctermbg=NONE cterm=NONE
+    hi Changed ctermfg=32 ctermbg=NONE cterm=NONE
+    hi Removed ctermfg=161 ctermbg=NONE cterm=NONE
   else
     " Light background
     hi Normal ctermfg=16 ctermbg=231 cterm=NONE
@@ -316,8 +319,9 @@ if s:t_Co >= 256
     hi DiffChange ctermfg=235 ctermbg=253 cterm=NONE
     hi DiffText ctermfg=23 ctermbg=152 cterm=NONE
     hi DiffDelete ctermfg=95 ctermbg=224 cterm=NONE
-    hi diffAdded ctermfg=28 ctermbg=NONE cterm=NONE
-    hi diffRemoved ctermfg=160 ctermbg=NONE cterm=NONE
+    hi Added ctermfg=71 ctermbg=NONE cterm=NONE
+    hi Changed ctermfg=32 ctermbg=NONE cterm=NONE
+    hi Removed ctermfg=160 ctermbg=NONE cterm=NONE
   endif
   unlet s:t_Co
   finish
@@ -386,12 +390,13 @@ if s:t_Co >= 16
     hi Directory ctermfg=blue ctermbg=NONE cterm=bold
     hi Conceal ctermfg=NONE ctermbg=NONE cterm=NONE
     hi Ignore ctermfg=NONE ctermbg=NONE cterm=NONE
-    hi DiffAdd ctermfg=black ctermbg=darkmagenta cterm=NONE
+    hi DiffAdd ctermfg=black ctermbg=darkgreen cterm=NONE
     hi DiffChange ctermfg=black ctermbg=lightgray cterm=NONE
     hi DiffText ctermfg=black ctermbg=cyan cterm=NONE
     hi DiffDelete ctermfg=black ctermbg=darkred cterm=NONE
-    hi diffAdded ctermfg=darkgreen ctermbg=NONE cterm=NONE
-    hi diffRemoved ctermfg=darkred ctermbg=NONE cterm=NONE
+    hi Added ctermfg=darkgreen ctermbg=NONE cterm=NONE
+    hi Changed ctermfg=darkblue ctermbg=NONE cterm=NONE
+    hi Removed ctermfg=darkred ctermbg=NONE cterm=NONE
   else
     " Light background
     hi Normal ctermfg=black ctermbg=white cterm=NONE
@@ -455,12 +460,13 @@ if s:t_Co >= 16
     hi Directory ctermfg=darkblue ctermbg=NONE cterm=bold
     hi Conceal ctermfg=NONE ctermbg=NONE cterm=NONE
     hi Ignore ctermfg=NONE ctermbg=NONE cterm=NONE
-    hi DiffAdd ctermfg=black ctermbg=darkmagenta cterm=NONE
+    hi DiffAdd ctermfg=black ctermbg=darkgreen cterm=NONE
     hi DiffChange ctermfg=black ctermbg=lightgray cterm=NONE
     hi DiffText ctermfg=black ctermbg=cyan cterm=NONE
     hi DiffDelete ctermfg=black ctermbg=darkred cterm=NONE
-    hi diffAdded ctermfg=darkgreen ctermbg=NONE cterm=NONE
-    hi diffRemoved ctermfg=red ctermbg=NONE cterm=NONE
+    hi Added ctermfg=green ctermbg=NONE cterm=NONE
+    hi Changed ctermfg=blue ctermbg=NONE cterm=NONE
+    hi Removed ctermfg=red ctermbg=NONE cterm=NONE
   endif
   unlet s:t_Co
   finish
@@ -510,7 +516,7 @@ if s:t_Co >= 8
     hi VisualNOS ctermfg=black ctermbg=darkblue cterm=NONE
     hi CursorLine ctermfg=NONE ctermbg=NONE cterm=underline
     hi CursorColumn ctermfg=black ctermbg=darkyellow cterm=NONE
-    hi Folded ctermfg=black ctermbg=NONE cterm=bold
+    hi Folded ctermfg=grey ctermbg=NONE cterm=bold
     hi ColorColumn ctermfg=black ctermbg=darkyellow cterm=NONE
     hi SpellBad ctermfg=darkred ctermbg=NONE cterm=reverse
     hi SpellCap ctermfg=darkcyan ctermbg=NONE cterm=reverse
@@ -519,20 +525,20 @@ if s:t_Co >= 8
     hi Comment ctermfg=NONE ctermbg=NONE cterm=bold
     hi Constant ctermfg=darkred ctermbg=NONE cterm=NONE
     hi String ctermfg=darkgreen ctermbg=NONE cterm=NONE
-    hi Identifier ctermfg=NONE ctermbg=NONE cterm=NONE
-    hi Statement ctermfg=darkblue ctermbg=NONE cterm=bold
+    hi Identifier ctermfg=darkmagenta ctermbg=NONE cterm=NONE
+    hi Statement ctermfg=darkblue ctermbg=NONE cterm=NONE
     hi Type ctermfg=darkyellow ctermbg=NONE cterm=NONE
     hi PreProc ctermfg=darkcyan ctermbg=NONE cterm=NONE
-    hi Special ctermfg=darkcyan ctermbg=NONE cterm=NONE
+    hi Special ctermfg=darkmagenta ctermbg=NONE cterm=NONE
     hi Underlined ctermfg=NONE ctermbg=NONE cterm=underline
     hi Title ctermfg=NONE ctermbg=NONE cterm=bold
     hi Directory ctermfg=darkblue ctermbg=NONE cterm=bold
     hi Conceal ctermfg=NONE ctermbg=NONE cterm=NONE
     hi Ignore ctermfg=NONE ctermbg=NONE cterm=NONE
-    hi DiffAdd ctermfg=black ctermbg=darkmagenta cterm=NONE
-    hi DiffChange ctermfg=black ctermbg=darkcyan cterm=NONE
-    hi DiffText ctermfg=black ctermbg=grey cterm=NONE
-    hi DiffDelete ctermfg=darkred ctermbg=NONE cterm=NONE
+    hi DiffAdd ctermfg=black ctermbg=darkgreen cterm=NONE
+    hi DiffChange ctermfg=black ctermbg=darkblue cterm=NONE
+    hi DiffText ctermfg=black ctermbg=darkmagenta cterm=NONE
+    hi DiffDelete ctermfg=black ctermbg=darkred cterm=NONE
   else
     " Light background
     hi Normal ctermfg=black ctermbg=grey cterm=NONE
@@ -586,20 +592,20 @@ if s:t_Co >= 8
     hi Comment ctermfg=NONE ctermbg=NONE cterm=bold
     hi Constant ctermfg=darkred ctermbg=NONE cterm=NONE
     hi String ctermfg=darkgreen ctermbg=NONE cterm=NONE
-    hi Identifier ctermfg=NONE ctermbg=NONE cterm=NONE
-    hi Statement ctermfg=darkblue ctermbg=NONE cterm=bold
+    hi Identifier ctermfg=darkmagenta ctermbg=NONE cterm=NONE
+    hi Statement ctermfg=darkblue ctermbg=NONE cterm=NONE
     hi Type ctermfg=darkyellow ctermbg=NONE cterm=NONE
     hi PreProc ctermfg=darkcyan ctermbg=NONE cterm=NONE
-    hi Special ctermfg=darkcyan ctermbg=NONE cterm=NONE
+    hi Special ctermfg=darkmagenta ctermbg=NONE cterm=NONE
     hi Underlined ctermfg=NONE ctermbg=NONE cterm=underline
     hi Title ctermfg=NONE ctermbg=NONE cterm=bold
     hi Directory ctermfg=darkblue ctermbg=NONE cterm=bold
     hi Conceal ctermfg=NONE ctermbg=NONE cterm=NONE
     hi Ignore ctermfg=NONE ctermbg=NONE cterm=NONE
-    hi DiffAdd ctermfg=black ctermbg=darkmagenta cterm=NONE
-    hi DiffChange ctermfg=black ctermbg=darkcyan cterm=NONE
-    hi DiffText ctermfg=grey ctermbg=black cterm=NONE
-    hi DiffDelete ctermfg=darkred ctermbg=NONE cterm=NONE
+    hi DiffAdd ctermfg=black ctermbg=darkgreen cterm=NONE
+    hi DiffChange ctermfg=black ctermbg=darkblue cterm=NONE
+    hi DiffText ctermfg=black ctermbg=darkmagenta cterm=NONE
+    hi DiffDelete ctermfg=black ctermbg=darkred cterm=NONE
   endif
   unlet s:t_Co
   finish
@@ -700,7 +706,7 @@ endif
 " Color: colorlC                 #ff5fff        207            magenta
 " Color: colorDim                #878787        102            grey
 " Color: colorMP                 #ff00af        199            magenta
-" Color: diffAdd                 #5f875f        65             darkmagenta
+" Color: diffAdd                 #5f875f        65             darkgreen
 " Color: diffAddFg               #afffaf        157            black
 " Color: diffDelete              #875f5f        95             darkred
 " Color: diffDeleteFg            #ffafaf        217            black
@@ -739,7 +745,7 @@ endif
 " Color: colorDim                #626262        241            darkgrey
 " Color: colorSt                 #5f5f5f        59             darkgrey
 " Color: colorMP                 #ff00af        199            magenta
-" Color: diffAdd                 #afd7af        151            darkmagenta
+" Color: diffAdd                 #afd7af        151            darkgreen
 " Color: diffAddFg               #005f00        22             black
 " Color: diffDelete              #ffd7d7        224            darkred
 " Color: diffDeleteFg            #875f5f        95             black

runtime/compiler/gm2.vim

@@ -0,0 +1,26 @@
+" Vim compiler file
+" Compiler:	GNU Modula-2 Compiler
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2024 Jan 04
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "gm2"
+
+if exists(":CompilerSet") != 2		" older Vim always used :setlocal
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+CompilerSet makeprg=gm2
+CompilerSet errorformat=%-G%f:%l:%c:\ error:\ compilation\ failed,
+		       \%f:%l:%c:\ %trror:\ %m,
+		       \%f:%l:%c:\ %tarning:\ %m,
+		       \%f:%l:%c:\ %tote:\ %m,
+		       \%-G%.%#
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/doc/Make_mvc.mak

@@ -39,6 +39,9 @@ ICONV = "$(ICONV_PATH)\iconv.exe"
 !ENDIF
 
 RM = del /q
+PS = PowerShell.exe
+
+PSFLAGS = -NoLogo -NoProfile -Command
 
 .SUFFIXES :
 .SUFFIXES : .c .o .txt .html
@@ -49,9 +52,9 @@ all : tags perlhtml $(CONVERTED)
 # Use "doctags" to generate the tags file.  Only works for English!
 tags : doctags $(DOCS)
 	doctags.exe $(DOCS) | sort /L C /O tags
-	powershell -nologo -noprofile -Command \
-		"(Get-Content -Raw tags | Get-Unique | % {$$_ -replace \"`r\", \"\"}) \
-		| New-Item -Force -Path . -ItemType file -Name tags"
+	$(PS) $(PSFLAGS) \
+		(Get-Content -Raw tags ^| Get-Unique ^| %%{$$_ -replace \"`r\", \"\"})\
+		^| New-Item -Force -Path . -ItemType file -Name tags
 
 doctags : doctags.c
 	$(CC) doctags.c
@@ -64,12 +67,10 @@ vimtags : $(DOCS)
 
 
 uganda.nsis.txt : uganda.???
-	!@powershell -nologo -noprofile -Command \
-		$$ext=(Get-Item $?).Extension; (Get-Content $? ^| \
-		% {$$_ -replace '\s*\*[-a-zA-Z0-9.]*\*', '' -replace 'vim:tw=78:.*', ''}) \
+	!@$(PS) $(PSFLAGS) $$ext=(Get-Item $?).Extension; (Get-Content $? ^| \
+		%%{$$_ -replace '\s*\*[-a-zA-Z0-9.]*\*', '' -replace 'vim:tw=78:.*', ''})\
 		^| Set-Content $*$$ext
-	!@powershell -nologo -noprofile -Command \
-		$$ext=(Get-Item $?).Extension; \
+	!@$(PS) $(PSFLAGS) $$ext=(Get-Item $?).Extension; \
 		(Get-Content -Raw $(@B)$$ext).Trim() -replace '(\r\n){3,}', '$$1$$1' \
 		^| Set-Content $(@B)$$ext
 
@@ -105,7 +106,7 @@ perlhtml : tags $(DOCS)
 
 # Check URLs in the help with "curl" or "powershell".
 test_urls :
-	"$(VIMEXE)" -S test_urls.vim
+	"$(VIMEXE)" --clean -S test_urls.vim
 
 clean :
 	$(RM) doctags.exe doctags.obj
@@ -203,7 +204,7 @@ os_win32.txt :
 <<
 
 convert-all : $(CONVERTED)
-!IF [powershell -nologo -noprofile "exit $$psversiontable.psversion.major"] == 2
+!IF [$(PS) $(PSFLAGS) "exit $$psversiontable.psversion.major"] == 2
 !ERROR The program "PowerShell" version 3.0 or higher is required to work
 !ENDIF
 
@@ -212,7 +213,7 @@ vim-da.UTF-8.1 : vim-da.1
 	$(ICONV) -f ISO-8859-1 -t UTF-8 $? >$@
 !ELSE
 # Conversion to UTF-8 encoding without BOM and with UNIX-like line ending
-	powershell -nologo -noprofile -Command \
+	$(PS) $(PSFLAGS) \
 		[IO.File]::ReadAllText(\"$?\", [Text.Encoding]::GetEncoding(28591)) ^| \
 		1>nul New-Item -Force -Path . -ItemType file -Name $@
 !ENDIF
@@ -222,7 +223,7 @@ vimdiff-da.UTF-8.1 : vimdiff-da.1
 	$(ICONV) -f ISO-8859-1 -t UTF-8 $? >$@
 !ELSE
 # Conversion to UTF-8 encoding without BOM and with UNIX-like line ending
-	powershell -nologo -noprofile -Command \
+	$(PS) $(PSFLAGS) \
 		[IO.File]::ReadAllText(\"$?\", [Text.Encoding]::GetEncoding(28591)) ^| \
 		1>nul New-Item -Force -Path . -ItemType file -Name $@
 !ENDIF
@@ -232,7 +233,7 @@ vimtutor-da.UTF-8.1 : vimtutor-da.1
 	$(ICONV) -f ISO-8859-1 -t UTF-8 $? >$@
 !ELSE
 # Conversion to UTF-8 encoding without BOM and with UNIX-like line ending
-	powershell -nologo -noprofile -Command \
+	$(PS) $(PSFLAGS) \
 		[IO.File]::ReadAllText(\"$?\", [Text.Encoding]::GetEncoding(28591)) ^| \
 		1>nul New-Item -Force -Path . -ItemType file -Name $@
 !ENDIF
@@ -242,7 +243,7 @@ vim-de.UTF-8.1 : vim-de.1
 	$(ICONV) -f ISO-8859-1 -t UTF-8 $? >$@
 !ELSE
 # Conversion to UTF-8 encoding without BOM and with UNIX-like line ending
-	powershell -nologo -noprofile -Command \
+	$(PS) $(PSFLAGS) \
 		[IO.File]::ReadAllText(\"$?\", [Text.Encoding]::GetEncoding(28591)) ^| \
 		1>nul New-Item -Force -Path . -ItemType file -Name $@
 !ENDIF
@@ -252,7 +253,7 @@ evim-fr.UTF-8.1 : evim-fr.1
 	$(ICONV) -f ISO-8859-1 -t UTF-8 $? >$@
 !ELSE
 # Conversion to UTF-8 encoding without BOM and with UNIX-like line ending
-	powershell -nologo -noprofile -Command \
+	$(PS) $(PSFLAGS) \
 		[IO.File]::ReadAllText(\"$?\", [Text.Encoding]::GetEncoding(28591)) ^| \
 		1>nul New-Item -Force -Path . -ItemType file -Name $@
 !ENDIF
@@ -262,7 +263,7 @@ vim-fr.UTF-8.1 : vim-fr.1
 	$(ICONV) -f ISO-8859-1 -t UTF-8 $? >$@
 !ELSE
 # Conversion to UTF-8 encoding without BOM and with UNIX-like line ending
-	powershell -nologo -noprofile -Command \
+	$(PS) $(PSFLAGS) \
 		[IO.File]::ReadAllText(\"$?\", [Text.Encoding]::GetEncoding(28591)) ^| \
 		1>nul New-Item -Force -Path . -ItemType file -Name $@
 !ENDIF
@@ -272,7 +273,7 @@ vimdiff-fr.UTF-8.1 : vimdiff-fr.1
 	$(ICONV) -f ISO-8859-1 -t UTF-8 $? >$@
 !ELSE
 # Conversion to UTF-8 encoding without BOM and with UNIX-like line ending
-	powershell -nologo -noprofile -Command \
+	$(PS) $(PSFLAGS) \
 		[IO.File]::ReadAllText(\"$?\", [Text.Encoding]::GetEncoding(28591)) ^| \
 		1>nul New-Item -Force -Path . -ItemType file -Name $@
 !ENDIF
@@ -282,7 +283,7 @@ vimtutor-fr.UTF-8.1 : vimtutor-fr.1
 	$(ICONV) -f ISO-8859-1 -t utf-8 $? >$@
 !ELSE
 # Conversion to UTF-8 encoding without BOM and with UNIX-like line ending
-	powershell -nologo -noprofile -Command \
+	$(PS) $(PSFLAGS) \
 		[IO.File]::ReadAllText(\"$?\", [Text.Encoding]::GetEncoding(28591)) ^| \
 		1>nul New-Item -Force -Path . -ItemType file -Name $@
 !ENDIF
@@ -292,7 +293,7 @@ xxd-fr.UTF-8.1 : xxd-fr.1
 	$(ICONV) -f ISO-8859-1 -t UTF-8 $? >$@
 !ELSE
 # Conversion to UTF-8 encoding without BOM and with UNIX-like line ending
-	powershell -nologo -noprofile -Command \
+	$(PS) $(PSFLAGS) \
 		[IO.File]::ReadAllText(\"$?\", [Text.Encoding]::GetEncoding(28591)) ^| \
 		1>nul New-Item -Force -Path . -ItemType file -Name $@
 !ENDIF
@@ -302,7 +303,7 @@ evim-it.UTF-8.1 : evim-it.1
 	$(ICONV) -f ISO-8859-1 -t UTF-8 $? >$@
 !ELSE
 # Conversion to UTF-8 encoding without BOM and with UNIX-like line ending
-	powershell -nologo -noprofile -Command \
+	$(PS) $(PSFLAGS) \
 		[IO.File]::ReadAllText(\"$?\", [Text.Encoding]::GetEncoding(28591)) ^| \
 		1>nul New-Item -Force -Path . -ItemType file -Name $@
 !ENDIF
@@ -312,7 +313,7 @@ vim-it.UTF-8.1 : vim-it.1
 	$(ICONV) -f ISO-8859-1 -t UTF-8 $? >$@
 !ELSE
 # Conversion to UTF-8 encoding without BOM and with UNIX-like line ending
-	powershell -nologo -noprofile -Command \
+	$(PS) $(PSFLAGS) \
 		[IO.File]::ReadAllText(\"$?\", [Text.Encoding]::GetEncoding(28591)) ^| \
 		1>nul New-Item -Force -Path . -ItemType file -Name $@
 !ENDIF
@@ -322,7 +323,7 @@ vimdiff-it.UTF-8.1 : vimdiff-it.1
 	$(ICONV) -f ISO-8859-1 -t UTF-8 $? >$@
 !ELSE
 # Conversion to UTF-8 encoding without BOM and with UNIX-like line ending
-	powershell -nologo -noprofile -Command \
+	$(PS) $(PSFLAGS) \
 		[IO.File]::ReadAllText(\"$?\", [Text.Encoding]::GetEncoding(28591)) ^| \
 		1>nul New-Item -Force -Path . -ItemType file -Name $@
 !ENDIF
@@ -332,7 +333,7 @@ vimtutor-it.UTF-8.1 : vimtutor-it.1
 	$(ICONV) -f ISO-8859-1 -t UTF-8 $? >$@
 !ELSE
 # Conversion to UTF-8 encoding without BOM and with UNIX-like line ending
-	powershell -nologo -noprofile -Command \
+	$(PS) $(PSFLAGS) \
 		[IO.File]::ReadAllText(\"$?\", [Text.Encoding]::GetEncoding(28591)) ^| \
 		1>nul New-Item -Force -Path . -ItemType file -Name $@
 !ENDIF
@@ -342,7 +343,7 @@ xxd-it.UTF-8.1 : xxd-it.1
 	$(ICONV) -f ISO-8859-1 -t UTF-8 $? >$@
 !ELSE
 # Conversion to UTF-8 encoding without BOM and with UNIX-like line ending
-	powershell -nologo -noprofile -Command \
+	$(PS) $(PSFLAGS) \
 		[IO.File]::ReadAllText(\"$?\", [Text.Encoding]::GetEncoding(28591)) ^| \
 		1>nul New-Item -Force -Path . -ItemType file -Name $@
 !ENDIF
@@ -352,7 +353,7 @@ evim-pl.UTF-8.1 : evim-pl.1
 	$(ICONV) -f ISO-8859-2 -t UTF-8 $? >$@
 !ELSE
 # Conversion to UTF-8 encoding without BOM and with UNIX-like line ending
-	powershell -nologo -noprofile -Command \
+	$(PS) $(PSFLAGS) \
 		[IO.File]::ReadAllText(\"$?\", [Text.Encoding]::GetEncoding(28592)) ^| \
 		1>nul New-Item -Force -Path . -ItemType file -Name $@
 !ENDIF
@@ -362,7 +363,7 @@ vim-pl.UTF-8.1 : vim-pl.1
 	$(ICONV) -f ISO-8859-2 -t UTF-8 $? >$@
 !ELSE
 # Conversion to UTF-8 encoding without BOM and with UNIX-like line ending
-	powershell -nologo -noprofile -Command \
+	$(PS) $(PSFLAGS) \
 		[IO.File]::ReadAllText(\"$?\", [Text.Encoding]::GetEncoding(28592)) ^| \
 		1>nul New-Item -Force -Path . -ItemType file -Name $@
 !ENDIF
@@ -372,7 +373,7 @@ vimdiff-pl.UTF-8.1 : vimdiff-pl.1
 	$(ICONV) -f ISO-8859-2 -t UTF-8 $? >$@
 !ELSE
 # Conversion to UTF-8 encoding without BOM and with UNIX-like line ending
-	powershell -nologo -noprofile -Command \
+	$(PS) $(PSFLAGS) \
 		[IO.File]::ReadAllText(\"$?\", [Text.Encoding]::GetEncoding(28592)) ^| \
 		1>nul New-Item -Force -Path . -ItemType file -Name $@
 !ENDIF
@@ -382,7 +383,7 @@ vimtutor-pl.UTF-8.1 : vimtutor-pl.1
 	$(ICONV) -f ISO-8859-2 -t UTF-8 $? >$@
 !ELSE
 # Conversion to UTF-8 encoding without BOM and with UNIX-like line ending
-	powershell -nologo -noprofile -Command \
+	$(PS) $(PSFLAGS) \
 		[IO.File]::ReadAllText(\"$?\", [Text.Encoding]::GetEncoding(28592)) ^| \
 		1>nul New-Item -Force -Path . -ItemType file -Name $@
 !ENDIF
@@ -392,7 +393,7 @@ xxd-pl.UTF-8.1 : xxd-pl.1
 	$(ICONV) -f ISO-8859-2 -t UTF-8 $? >$@
 !ELSE
 # Conversion to UTF-8 encoding without BOM and with UNIX-like line ending
-	powershell -nologo -noprofile -Command \
+	$(PS) $(PSFLAGS) \
 		[IO.File]::ReadAllText(\"$?\", [Text.Encoding]::GetEncoding(28592)) ^| \
 		1>nul New-Item -Force -Path . -ItemType file -Name $@
 !ENDIF
@@ -402,7 +403,7 @@ evim-ru.UTF-8.1 : evim-ru.1
 	$(ICONV) -f KOI8-R -t UTF-8 $? >$@
 !ELSE
 # Conversion to UTF-8 encoding without BOM and with UNIX-like line ending
-	powershell -nologo -noprofile -Command \
+	$(PS) $(PSFLAGS) \
 		[IO.File]::ReadAllText(\"$?\", [Text.Encoding]::GetEncoding(20866)) ^| \
 		1>nul New-Item -Force -Path . -ItemType file -Name $@
 !ENDIF
@@ -412,7 +413,7 @@ vim-ru.UTF-8.1 : vim-ru.1
 	$(ICONV) -f KOI8-R -t UTF-8 $? >$@
 !ELSE
 # Conversion to UTF-8 encoding without BOM and with UNIX-like line ending
-	powershell -nologo -noprofile -Command \
+	$(PS) $(PSFLAGS) \
 		[IO.File]::ReadAllText(\"$?\", [Text.Encoding]::GetEncoding(20866)) ^| \
 		1>nul New-Item -Force -Path . -ItemType file -Name $@
 !ENDIF
@@ -422,7 +423,7 @@ vimdiff-ru.UTF-8.1 : vimdiff-ru.1
 	$(ICONV) -f KOI8-R -t UTF-8 $? >$@
 !ELSE
 # Conversion to UTF-8 encoding without BOM and with UNIX-like line ending
-	powershell -nologo -noprofile -Command \
+	$(PS) $(PSFLAGS) \
 		[IO.File]::ReadAllText(\"$?\", [Text.Encoding]::GetEncoding(20866)) ^| \
 		1>nul New-Item -Force -Path . -ItemType file -Name $@
 !ENDIF
@@ -432,7 +433,7 @@ vimtutor-ru.UTF-8.1 : vimtutor-ru.1
 	$(ICONV) -f KOI8-R -t UTF-8 $? >$@
 !ELSE
 # Conversion to UTF-8 encoding without BOM and with UNIX-like line ending
-	powershell -nologo -noprofile -Command \
+	$(PS) $(PSFLAGS) \
 		[IO.File]::ReadAllText(\"$?\", [Text.Encoding]::GetEncoding(20866)) ^| \
 		1>nul New-Item -Force -Path . -ItemType file -Name $@
 !ENDIF
@@ -442,7 +443,7 @@ xxd-ru.UTF-8.1 : xxd-ru.1
 	$(ICONV) -f KOI8-R -t UTF-8 $? >$@
 !ELSE
 # Conversion to UTF-8 encoding without BOM and with UNIX-like line ending
-	powershell -nologo -noprofile -Command \
+	$(PS) $(PSFLAGS) \
 		[IO.File]::ReadAllText(\"$?\", [Text.Encoding]::GetEncoding(20866)) ^| \
 		1>nul New-Item -Force -Path . -ItemType file -Name $@
 !ENDIF
@@ -452,7 +453,7 @@ evim-tr.UTF-8.1 : evim-tr.1
 	$(ICONV) -f ISO-8859-9 -t UTF-8 $? >$@
 !ELSE
 # Conversion to UTF-8 encoding without BOM and with UNIX-like line ending
-	powershell -nologo -noprofile -Command \
+	$(PS) $(PSFLAGS) \
 		[IO.File]::ReadAllText(\"$?\", [Text.Encoding]::GetEncoding(28599)) ^| \
 		1>nul New-Item -Force -Path . -ItemType file -Name $@
 !ENDIF
@@ -462,7 +463,7 @@ vim-tr.UTF-8.1 : vim-tr.1
 	$(ICONV) -f ISO-8859-9 -t UTF-8 $? >$@
 !ELSE
 # Conversion to UTF-8 encoding without BOM and with UNIX-like line ending
-	powershell -nologo -noprofile -Command \
+	$(PS) $(PSFLAGS) \
 		[IO.File]::ReadAllText(\"$?\", [Text.Encoding]::GetEncoding(28599)) ^| \
 		1>nul New-Item -Force -Path . -ItemType file -Name $@
 !ENDIF
@@ -472,7 +473,7 @@ vimdiff-tr.UTF-8.1 : vimdiff-tr.1
 	$(ICONV) -f ISO-8859-9 -t UTF-8 $? >$@
 !ELSE
 # Conversion to UTF-8 encoding without BOM and with UNIX-like line ending
-	powershell -nologo -noprofile -Command \
+	$(PS) $(PSFLAGS) \
 		[IO.File]::ReadAllText(\"$?\", [Text.Encoding]::GetEncoding(28599)) ^| \
 		1>nul New-Item -Force -Path . -ItemType file -Name $@
 !ENDIF
@@ -482,7 +483,7 @@ vimtutor-tr.UTF-8.1 : vimtutor-tr.1
 	$(ICONV) -f ISO-8859-9 -t UTF-8 $? >$@
 !ELSE
 # Conversion to UTF-8 encoding without BOM and with UNIX-like line ending
-	powershell -nologo -noprofile -Command \
+	$(PS) $(PSFLAGS) \
 		[IO.File]::ReadAllText(\"$?\", [Text.Encoding]::GetEncoding(28599)) ^| \
 		1>nul New-Item -Force -Path . -ItemType file -Name $@
 !ENDIF

runtime/doc/Makefile

@@ -18,6 +18,7 @@ include Make_all.mak
 
 .SUFFIXES:
 .SUFFIXES: .c .o .txt .html
+.PHONY: all vimtags noerrors perlhtml clean test_urls
 
 all: tags vim.man evim.man vimdiff.man vimtutor.man xxd.man $(CONVERTED)
 
@@ -28,26 +29,26 @@ vimtags: $(DOCS)
 
 # Use "doctags" to generate the tags file.  Only works for English!
 tags: doctags $(DOCS)
-	./doctags $(DOCS) | LANG=C LC_ALL=C sort >tags
+	./doctags $(DOCS) | LANG=C LC_ALL=C sort >$@
 	uniq -d -2 tags
 
 doctags: doctags.c
 	$(CC) doctags.c -o doctags
 
 vim.man: vim.1
-	nroff -man vim.1 | sed -e s/.//g > vim.man
+	nroff -man $< | sed -e s/.//g > $@
 
 evim.man: evim.1
-	nroff -man evim.1 | sed -e s/.//g > evim.man
+	nroff -man $< | sed -e s/.//g > $@
 
 vimdiff.man: vimdiff.1
-	nroff -man vimdiff.1 | sed -e s/.//g > vimdiff.man
+	nroff -man $< | sed -e s/.//g > $@
 
 vimtutor.man: vimtutor.1
-	nroff -man vimtutor.1 | sed -e s/.//g > vimtutor.man
+	nroff -man $< | sed -e s/.//g > $@
 
 xxd.man: xxd.1
-	nroff -man xxd.1 | sed -e s/.//g > xxd.man
+	nroff -man $< | sed -e s/.//g > $@
 
 uganda.nsis.txt: uganda.txt
 	sed -e 's/[ 	]*\*[-a-zA-Z0-9.]*\*//g' -e 's/vim:tw=78:.*//' \
@@ -68,10 +69,10 @@ $(HTMLS): tags.ref
 # index.html is the starting point for HTML, but for the help files it is
 # help.txt.  Therefore use vimindex.html for index.txt.
 index.html: help.txt
-	$(AWK) -f makehtml.awk help.txt >index.html
+	$(AWK) -f makehtml.awk $< >$@
 
 vimindex.html: index.txt
-	$(AWK) -f makehtml.awk index.txt >vimindex.html
+	$(AWK) -f makehtml.awk $< >$@
 
 tags.ref tags.html: tags
 	$(AWK) -f maketags.awk tags >tags.html
@@ -84,7 +85,7 @@ perlhtml: tags $(DOCS)
 
 # Check URLs in the help with "curl".
 test_urls:
-	vim -S test_urls.vim
+	$(VIMEXE) --clean -S test_urls.vim
 
 clean:
 	-rm -f doctags *.html tags.ref
@@ -92,58 +93,58 @@ clean:
 # These files are in the extra archive, skip if not present
 
 arabic.txt:
-	touch arabic.txt
+	touch $@
 
 farsi.txt:
-	touch farsi.txt
+	touch $@
 
 hebrew.txt:
-	touch hebrew.txt
+	touch $@
 
 russian.txt:
-	touch russian.txt
+	touch $@
 
 gui_w32.txt:
-	touch gui_w32.txt
+	touch $@
 
 if_ole.txt:
-	touch if_ole.txt
+	touch $@
 
 os_390.txt:
-	touch os_390.txt
+	touch $@
 
 os_amiga.txt:
-	touch os_amiga.txt
+	touch $@
 
 os_beos.txt:
-	touch os_beos.txt
+	touch $@
 
 os_dos.txt:
-	touch os_dos.txt
+	touch $@
 
 os_haiku.txt:
-	touch os_haiku.txt
+	touch $@
 
 os_mac.txt:
-	touch os_mac.txt
+	touch $@
 
 os_mint.txt:
-	touch os_mint.txt
+	touch $@
 
 os_msdos.txt:
-	touch os_msdos.txt
+	touch $@
 
 os_os2.txt:
-	touch os_os2.txt
+	touch $@
 
 os_qnx.txt:
-	touch os_qnx.txt
+	touch $@
 
 os_risc.txt:
-	touch os_risc.txt
+	touch $@
 
 os_win32.txt:
-	touch os_win32.txt
+	touch $@
 
 # Note that $< works with GNU make while $> works for BSD make.
 # Is there a solution that works for both??

runtime/doc/autocmd.txt

@@ -1,4 +1,4 @@
-*autocmd.txt*   For Vim version 9.1.  Last change: 2023 May 20
+*autocmd.txt*   For Vim version 9.1.  Last change: 2024 Jan 25
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -340,6 +340,7 @@ Name			triggered by ~
 |GUIEnter|		after starting the GUI successfully
 |GUIFailed|		after starting the GUI failed
 |TermResponse|		after the terminal response to |t_RV| is received
+|TermResponseAll|	after the terminal response to |t_RV| and others is received
 
 |QuitPre|		when using `:quit`, before deciding whether to exit
 |ExitPre|		when using a command that may make Vim exit
@@ -380,6 +381,7 @@ Name			triggered by ~
 |CursorMoved|		the cursor was moved in Normal mode
 |CursorMovedI|		the cursor was moved in Insert mode
 
+|WinNewPre|		before creating a new window
 |WinNew|		after creating a new window
 |TabNew|		after creating a new tab page
 |WinClosed|		after closing a window
@@ -1097,7 +1099,7 @@ SafeState			When nothing is pending, going to wait for the
 				- Command line completion is active
 				You can use `mode()` to find out what state
 				Vim is in.  That may be:
-				- VIsual mode
+				- Visual mode
 				- Normal mode
 				- Insert mode
 				- Command-line mode
@@ -1220,6 +1222,24 @@ TermResponse			After the response to |t_RV| is received from
 				triggered halfway executing another event,
 				especially if file I/O, a shell command or
 				anything else that takes time is involved.
+							*TermResponseAll*
+TermResponseAll			After the response to |t_RV|, |t_RC|, |t_RS|,
+				|t_RB|, |t_RF|, or |t_u7| are received from
+				the terminal.  The value of |v:termresponse|,
+				|v:termblinkresp|, |v:termstyleresp|,
+				|v:termrbgresp|, |v:termrfgresp|, and
+				|v:termu7resp|, correspondingly, can be used.
+				<amatch> will be set to any of:
+				    "version",
+				    "cursorblink",
+				    "cursorshape",
+				    "background",
+				    "foreground",
+				    "ambiguouswidth"
+				Note that this event may be triggered halfway
+				executing another event, especially if file I/O,
+				a shell command or anything else that takes time
+				is involved.
 							*TextChanged*
 TextChanged			After a change was made to the text in the
 				current buffer in Normal mode.  That is after
@@ -1371,6 +1391,18 @@ WinLeave			Before leaving a window.  If the window to be
 				WinLeave autocommands (but not for ":new").
 				Not used for ":qa" or ":q" when exiting Vim.
 
+							*WinNewPre*
+WinNewPre			Before creating a new window. Triggered
+				before commands that modify window layout by
+				creating a split or new tab page. Not done for
+				the first window, when Vim has just started.
+				It is not allowed to modify window layout
+				while executing commands for the WinNewPre
+				event.
+				Most useful to store current window layout
+				and compare it with the new layout after the
+				Window has been created.
+
 							*WinNew*
 WinNew				When a new window was created.  Not done for
 				the first window, when Vim has just started.

runtime/doc/builtin.txt

@@ -1,4 +1,4 @@
-*builtin.txt*	For Vim version 9.1.  Last change: 2024 Jan 04
+*builtin.txt*	For Vim version 9.1.  Last change: 2024 Mar 14
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -147,6 +147,8 @@ delete({fname} [, {flags}])	Number	delete the file or directory {fname}
 deletebufline({buf}, {first} [, {last}])
 				Number	delete lines from buffer {buf}
 did_filetype()			Number	|TRUE| if FileType autocmd event used
+diff({fromlist}, {tolist} [, {options}])
+				List	diff two Lists of strings
 diff_filler({lnum})		Number	diff filler lines about {lnum}
 diff_hlID({lnum}, {col})	Number	diff highlighting at {lnum}/{col}
 digraph_get({chars})		String	get the |digraph| of {chars}
@@ -198,6 +200,8 @@ foldclosedend({lnum})		Number	last line of fold at {lnum} if closed
 foldlevel({lnum})		Number	fold level at {lnum}
 foldtext()			String	line displayed for closed fold
 foldtextresult({lnum})		String	text for closed fold at {lnum}
+foreach({expr1}, {expr2})	List/Dict/Blob/String
+					for each item in {expr1} call {expr2}
 foreground()			Number	bring the Vim window to the foreground
 fullcommand({name} [, {vim9}])	String	get full command from {name}
 funcref({name} [, {arglist}] [, {dict}])
@@ -259,6 +263,8 @@ getqflist({what})		Dict	get specific quickfix list properties
 getreg([{regname} [, 1 [, {list}]]])
 				String or List   contents of a register
 getreginfo([{regname}])		Dict	information about a register
+getregion({pos1}, {pos2} [, {opts}])
+				List	get the text from {pos1} to {pos2}
 getregtype([{regname}])		String	type of a register
 getscriptinfo([{opts}])		List	list of sourced scripts
 gettabinfo([{expr}])		List	list of tab pages
@@ -2044,6 +2050,72 @@ did_filetype()	Returns |TRUE| when autocommands are being executed and the
 		editing another buffer to set 'filetype' and load a syntax
 		file.
 
+diff({fromlist}, {tolist} [, {options}])		*diff()*
+		Returns a String or a List containing the diff between the
+		strings in {fromlist} and {tolist}.  Uses the Vim internal
+		diff library to compute the diff.
+
+							*E106*
+		The optional "output" item in {options} specifies the returned
+		diff format.  The following values are supported:
+		    indices	Return a List of the starting and ending
+				indices and a count of the strings in each
+				diff hunk.
+		    unified	Return the unified diff output as a String.
+				This is the default.
+
+		If the "output" item in {options} is "indices", then a List is
+		returned.  Each List item contains a Dict with the following
+		items for each diff hunk:
+		    from_idx	start index in {fromlist} for this diff hunk.
+		    from_count	number of strings in {fromlist} that are
+				added/removed/modified in this diff hunk.
+		    to_idx	start index in {tolist} for this diff hunk.
+		    to_count	number of strings in {tolist} that are
+				added/removed/modified in this diff hunk.
+
+		The {options} Dict argument also specifies diff options
+		(similar to 'diffopt') and supports the following items:
+		    algorithm		Dict specifying the diff algorithm to
+					use.  Supported boolean items are
+					"myers", "minimal", "patience" and
+					"histogram".
+		    context		diff context length.  Default is 0.
+		    iblank		ignore changes where lines are all
+					blank.
+		    icase		ignore changes in case of text.
+		    indent-heuristic	use the indent heuristic for the
+					internal diff library.
+		    iwhite		ignore changes in amount of white
+					space.
+		    iwhiteall		ignore all white space changes.
+		    iwhiteeol		ignore white space changes at end of
+					line.
+		For more information about these options, refer to 'diffopt'.
+
+		To compute the unified diff, all the items in {fromlist} are
+		concatenated into a string using a newline separator and the
+		same for {tolist}.  The unified diff output uses line numbers.
+
+		Returns an empty List or String if {fromlist} and {tolist} are
+		identical.
+
+		Examples: >
+		    :echo diff(['abc'], ['xxx'])
+		     @@ -1 +1 @@
+		     -abc
+		     +xxx
+
+		    :echo diff(['abc'], ['xxx'], {'output': 'indices'})
+		     [{'from_idx': 0, 'from_count': 1, 'to_idx': 0, 'to_count': 1}]
+		    :echo diff(readfile('oldfile'), readfile('newfile'))
+		    :echo diff(getbufline(5, 1, '$'), getbufline(6, 1, '$'))
+<
+		For more examples, refer to |diff-func-examples|
+
+		Can also be used as a |method|: >
+			GetFromList->diff(to_list)
+<
 diff_filler({lnum})					*diff_filler()*
 		Returns the number of filler lines above line {lnum}.
 		These are the lines that were inserted at this point in
@@ -2193,6 +2265,8 @@ empty({expr})						*empty()*
 		- A |Job| is empty when it failed to start.
 		- A |Channel| is empty when it is closed.
 		- A |Blob| is empty when its length is zero.
+		- An |Object| is empty, when the |empty()| builtin method in
+		  the object (if present) returns true.
 
 		For a long |List| this is much faster than comparing the
 		length with zero.
@@ -2333,11 +2407,11 @@ exists({expr})	The result is a Number, which is |TRUE| if {expr} is defined,
 			varname		internal variable (see
 			dict.key	|internal-variables|).  Also works
 			list[i]		for |curly-braces-names|, |Dictionary|
-			import.Func	entries, |List| items, imported
-					items, etc.
-					Does not work for local variables in a
-					compiled `:def` function.
-					Also works for a function in |Vim9|
+			import.Func	entries, |List| items, class and
+			class.Func	object methods, imported items, etc.
+			object.Func	Does not work for local variables in a
+			class.varname	compiled `:def` function.
+			object.varname	Also works for a function in |Vim9|
 					script, since it can be used as a
 					function reference.
 					Beware that evaluating an index may
@@ -2468,6 +2542,9 @@ expand({string} [, {nosuf} [, {list}]])				*expand()*
 		for a non-existing file is not included, unless {string} does
 		not start with '%', '#' or '<', see below.
 
+		For a |:terminal| window '%' expands to a '!' followed by
+		the command or shell that is run |terminal-bufname|
+
 		When {string} starts with '%', '#' or '<', the expansion is
 		done like for the |cmdline-special| variables with their
 		associated modifiers.  Here is a short overview:
@@ -2995,6 +3072,45 @@ foldtextresult({lnum})					*foldtextresult()*
 
 		Can also be used as a |method|: >
 			GetLnum()->foldtextresult()
+
+foreach({expr1}, {expr2})					*foreach()*
+		{expr1} must be a |List|, |String|, |Blob| or |Dictionary|.
+		For each item in {expr1} execute {expr2}. {expr1} is not
+		modified; its values may be, as with |:lockvar| 1. |E741|
+		See |map()| and |filter()| to modify {expr1}.
+
+		{expr2} must be a |string| or |Funcref|.
+
+		If {expr2} is a |string|, inside {expr2} |v:val| has the value
+		of the current item.  For a |Dictionary| |v:key| has the key
+		of the current item and for a |List| |v:key| has the index of
+		the current item.  For a |Blob| |v:key| has the index of the
+		current byte. For a |String| |v:key| has the index of the
+		current character.
+		Examples: >
+			call foreach(mylist, 'used[v:val] = true')
+<		This records the items that are in the {expr1} list.
+
+		Note that {expr2} is the result of expression and is then used
+		as a command.  Often it is good to use a |literal-string| to
+		avoid having to double backslashes.
+
+		If {expr2} is a |Funcref| it must take two arguments:
+			1. the key or the index of the current item.
+			2. the value of the current item.
+		With a legacy script lambda you don't get an error if it only
+		accepts one argument, but with a Vim9 lambda you get "E1106:
+		One argument too many", the number of arguments must match.
+		If the function returns a value, it is ignored.
+
+		Returns {expr1} in all cases.
+		When an error is encountered while executing {expr2} no
+		further items in {expr1} are processed.
+		When {expr2} is a Funcref errors inside a function are ignored,
+		unless it was defined with the "abort" flag.
+
+		Can also be used as a |method|: >
+			mylist->foreach(expr2)
 <
 							*foreground()*
 foreground()	Move the Vim window to the foreground.  Useful when sent from
@@ -3203,6 +3319,8 @@ getbufinfo([{dict}])
 			bufnr		Buffer number.
 			changed		TRUE if the buffer is modified.
 			changedtick	Number of changes made to the buffer.
+			command		TRUE if the buffer belongs to the
+					command-line window |cmdwin|.
 			hidden		TRUE if the buffer is hidden.
 			lastused	Timestamp in seconds, like
 					|localtime()|, when the buffer was
@@ -3427,7 +3545,7 @@ getcharmod()						*getcharmod()*
 			32	mouse double click
 			64	mouse triple click
 			96	mouse quadruple click (== 32 + 64)
-			128	command (Macintosh only)
+			128	command (Mac) or super (GTK)
 		Only the modifiers that have not been included in the
 		character itself are obtained.  Thus Shift-a results in "A"
 		without a modifier.  Returns 0 if no modifiers are used.
@@ -4155,6 +4273,59 @@ getreginfo([{regname}])					*getreginfo()*
 		Can also be used as a |method|: >
 			GetRegname()->getreginfo()
 
+getregion({pos1}, {pos2} [, {opts}])			*getregion()*
+		Returns the list of strings from {pos1} to {pos2} from a
+		buffer.
+
+		{pos1} and {pos2} must both be |List|s with four numbers.
+		See |getpos()| for the format of the list.  It's possible
+		to specify positions from a different buffer, but please
+		note the limitations at |getregion-notes|.
+
+		The optional argument {opts} is a Dict and supports the
+		following items:
+
+			type		Specify the region's selection type
+					(default: "v"):
+			    "v"		for |characterwise| mode
+			    "V"		for |linewise| mode
+			    "<CTRL-V>"	for |blockwise-visual| mode
+
+			exclusive	If |TRUE|, use exclusive selection
+					for the end position
+					(default: follow 'selection')
+
+		You can get the last selection type by |visualmode()|.
+		If Visual mode is active, use |mode()| to get the Visual mode
+		(e.g., in a |:vmap|).
+		This function is useful to get text starting and ending in
+		different columns, such as a |characterwise-visual| selection.
+
+							*getregion-notes*
+		Note that:
+		- Order of {pos1} and {pos2} doesn't matter, it will always
+		  return content from the upper left position to the lower
+		  right position.
+		- If 'virtualedit' is enabled and the region is past the end
+		  of the lines, resulting lines are padded with spaces.
+		- If the region is blockwise and it starts or ends in the
+		  middle of a multi-cell character, it is not included but
+		  its selected part is substituted with spaces.
+		- If {pos1} and {pos2} are not in the same buffer, an empty
+		  list is returned.
+		- {pos1} and {pos2} must belong to a |bufloaded()| buffer.
+		- It is evaluated in current window context, which makes a
+		  difference if the buffer is displayed in a window with
+		  different 'virtualedit' or 'list' values.
+
+		Examples: >
+			:xnoremap <CR>
+			\ <Cmd>echow getregion(
+			\ getpos('v'), getpos('.'), #{ type: mode() })<CR>
+<
+		Can also be used as a |method|: >
+			getpos('.')->getregion(getpos("'a"))
+<
 getregtype([{regname}])					*getregtype()*
 		The result is a String, which is type of register {regname}.
 		The value will be one of:
@@ -4381,14 +4552,16 @@ getwinpos([{timeout}])					*getwinpos()*
 getwinposx()	The result is a Number, which is the X coordinate in pixels of
 		the left hand side of the GUI Vim window. Also works for an
 		xterm (uses a timeout of 100 msec).
-		The result will be -1 if the information is not available.
+		The result will be -1 if the information is not available
+		(e.g. on the Wayland backend).
 		The value can be used with `:winpos`.
 
 							*getwinposy()*
 getwinposy()	The result is a Number, which is the Y coordinate in pixels of
 		the top of the GUI Vim window.  Also works for an xterm (uses
 		a timeout of 100 msec).
-		The result will be -1 if the information is not available.
+		The result will be -1 if the information is not available
+		(e.g. on the Wayland backend).
 		The value can be used with `:winpos`.
 
 getwinvar({winnr}, {varname} [, {def}])				*getwinvar()*
@@ -5312,7 +5485,9 @@ len({expr})	The result is a Number, which is the length of the argument.
 		When {expr} is a |Blob| the number of bytes is returned.
 		When {expr} is a |Dictionary| the number of entries in the
 		|Dictionary| is returned.
-		Otherwise an error is given and returns zero.
+		When {expr} is an |Object|, invokes the |len()| method in the
+		object (if present) to get the length.  Otherwise returns
+		zero.
 
 		Can also be used as a |method|: >
 			mylist->len()
@@ -5933,6 +6108,7 @@ match({expr}, {pat} [, {start} [, {count}]])			*match()*
 		Note that when {count} is added the way {start} works changes,
 		see above.
 
+						*match-pattern*
 		See |pattern| for the patterns that are accepted.
 		The 'ignorecase' option is used to set the ignore-caseness of
 		the pattern.  'smartcase' is NOT used.  The matching is always
@@ -6073,31 +6249,34 @@ matchbufline({buf}, {pat}, {lnum}, {end}, [, {dict}])
 
 		For each match, a |Dict| with the following items is returned:
 		    byteidx	starting byte index of the match
-		    lnum	line number where there is a match
-		    text	matched string
+		    lnum	line number where there is a match
+		    text	matched string
 		Note that there can be multiple matches in a single line.
 
 		This function works only for loaded buffers. First call
 		|bufload()| if needed.
 
+		See |match-pattern| for information about the effect of some
+		option settings on the pattern.
+
 		When {buf} is not a valid buffer, the buffer is not loaded or
 		{lnum} or {end} is not valid then an error is given and an
 		empty |List| is returned.
 
 		Examples: >
-		    " Assuming line 3 in buffer 5 contains "a"
-		    :echo matchbufline(5, '\<\k\+\>', 3, 3)
-		    [{'lnum': 3, 'byteidx': 0, 'text': 'a'}]
-		    " Assuming line 4 in buffer 10 contains "tik tok"
-		    :echo matchbufline(10, '\<\k\+\>', 1, 4)
-		    [{'lnum': 4, 'byteidx': 0, 'text': 'tik'}, {'lnum': 4, 'byteidx': 4, 'text': 'tok'}]
+		    " Assuming line 3 in buffer 5 contains "a"
+		    :echo matchbufline(5, '\<\k\+\>', 3, 3)
+		    [{'lnum': 3, 'byteidx': 0, 'text': 'a'}]
+		    " Assuming line 4 in buffer 10 contains "tik tok"
+		    :echo matchbufline(10, '\<\k\+\>', 1, 4)
+		    [{'lnum': 4, 'byteidx': 0, 'text': 'tik'}, {'lnum': 4, 'byteidx': 4, 'text': 'tok'}]
 <
 		If {submatch} is present and is v:true, then submatches like
-		"\1", "\2", etc. are also returned.  Example: >
-		    " Assuming line 2 in buffer 2 contains "acd"
-		    :echo matchbufline(2, '\(a\)\?\(b\)\?\(c\)\?\(.*\)', 2, 2
+		"\1", "\2", etc. are also returned.  Example: >
+		    " Assuming line 2 in buffer 2 contains "acd"
+		    :echo matchbufline(2, '\(a\)\?\(b\)\?\(c\)\?\(.*\)', 2, 2
 						\ {'submatches': v:true})
-		    [{'lnum': 2, 'byteidx': 0, 'text': 'acd', 'submatches': ['a', '', 'c', 'd', '', '', '', '', '']}]
+		    [{'lnum': 2, 'byteidx': 0, 'text': 'acd', 'submatches': ['a', '', 'c', 'd', '', '', '', '', '']}]
 <		The "submatches" List always contains 9 items.  If a submatch
 		is not found, then an empty string is returned for that
 		submatch.
@@ -6254,11 +6433,14 @@ matchstrlist({list}, {pat} [, {dict}])
 		    submatches	a List of submatches.  Present only if
 				"submatches" is set to v:true in {dict}.
 
+		See |match-pattern| for information about the effect of some
+		option settings on the pattern.
+
 		Example: >
-		    :echo matchstrlist(['tik tok'], '\<\k\+\>')
-		    [{'idx': 0, 'byteidx': 0, 'text': 'tik'}, {'idx': 0, 'byteidx': 4, 'text': 'tok'}]
-		    :echo matchstrlist(['a', 'b'], '\<\k\+\>')
-		    [{'idx': 0, 'byteidx': 0, 'text': 'a'}, {'idx': 1, 'byteidx': 0, 'text': 'b'}]
+		    :echo matchstrlist(['tik tok'], '\<\k\+\>')
+		    [{'idx': 0, 'byteidx': 0, 'text': 'tik'}, {'idx': 0, 'byteidx': 4, 'text': 'tok'}]
+		    :echo matchstrlist(['a', 'b'], '\<\k\+\>')
+		    [{'idx': 0, 'byteidx': 0, 'text': 'a'}, {'idx': 1, 'byteidx': 0, 'text': 'b'}]
 <
 		If "submatches" is present and is v:true, then submatches like
 		"\1", "\2", etc. are also returned.  Example: >
@@ -6923,6 +7105,9 @@ printf({fmt}, {expr1} ...)				*printf()*
 		    echo printf("%1$*2$.*3$f", 1.4142135, 6, 2)
 <		      1.41
 
+		You will get an overflow error |E1510|, when the field-width
+		or precision will result in a string longer than 6400 chars.
+
 							*E1500*
 		You cannot mix positional and non-positional arguments: >
 		    echo printf("%s%1$s", "One", "Two")
@@ -7388,9 +7573,9 @@ reltime({start}, {end})					*reltime()*
 			echo startTime->reltime()->reltimestr()
 <
 		Without an argument reltime() returns the current time (the
-		representation is system-dependent, it can not be used as the
+		representation is system-dependent, it cannot be used as the
 		wall-clock time, see |localtime()| for that).
-		With one argument is returns the time passed since the time
+		With one argument it returns the time passed since the time
 		specified in the argument.
 		With two arguments it returns the time passed between {start}
 		and {end}.
@@ -7798,6 +7983,7 @@ search({pattern} [, {flags} [, {stopline} [, {timeout} [, {skip}]]]])
 		When a match has been found its line number is returned.
 		If there is no match a 0 is returned and the cursor doesn't
 		move.  No error message is given.
+		To get the matched string, use |matchbufline()|.
 
 		{flags} is a String, which can contain these character flags:
 		'b'	search Backward instead of forward
@@ -9416,6 +9602,10 @@ string({expr})	Return {expr} converted to a String.  If {expr} is a Number,
 		replaced by "[...]" or "{...}".  Using eval() on the result
 		will then fail.
 
+		For an object, invokes the |string()| method to get a textual
+		representation of the object.  If the method is not present,
+		then the default representation is used.
+
 		Can also be used as a |method|: >
 			mylist->string()
 
@@ -10642,17 +10832,16 @@ win_screenpos({nr})					*win_screenpos()*
 		[1, 1], unless there is a tabline, then it is [2, 1].
 		{nr} can be the window number or the |window-ID|.  Use zero
 		for the current window.
-		Returns [0, 0] if the window cannot be found in the current
-		tabpage.
+		Returns [0, 0] if the window cannot be found.
 
 		Can also be used as a |method|: >
 			GetWinid()->win_screenpos()
 <
 win_splitmove({nr}, {target} [, {options}])		*win_splitmove()*
-		Move the window {nr} to a new split of the window {target}.
-		This is similar to moving to {target}, creating a new window
-		using |:split| but having the same contents as window {nr}, and
-		then closing {nr}.
+		Temporarily switch to window {target}, then move window {nr}
+		to a new split adjacent to {target}.
+		Unlike commands such as |:split|, no new windows are created
+		(the |window-ID| of window {nr} is unchanged after the move).
 
 		Both {nr} and {target} can be window numbers or |window-ID|s.
 		Both must be in the current tab page.
@@ -10761,7 +10950,9 @@ winnr([{arg}])	The result is a Number, which is the number of the current
 			#	the number of the last accessed window (where
 				|CTRL-W_p| goes to).  If there is no previous
 				window or it is in another tab page 0 is
-				returned.
+				returned.  May refer to the current window in
+				some cases (e.g. when evaluating 'statusline'
+				expressions).
 			{N}j	the number of the Nth window below the
 				current window (where |CTRL-W_j| goes to).
 			{N}k	the number of the Nth window above the current

runtime/doc/diff.txt

@@ -1,4 +1,4 @@
-*diff.txt*      For Vim version 9.1.  Last change: 2023 Apr 04
+*diff.txt*      For Vim version 9.1.  Last change: 2024 Feb 01
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -476,4 +476,48 @@ Otherwise, the expression is evaluated in the context of the script where the
 option was set, thus script-local items are available.
 
 
+DIFF FUNCTION EXAMPLES				*diff-func-examples*
+
+Some examples for using the |diff()| function to compute the diff indices
+between two Lists of strings are below.
+>
+  " some lines are changed
+  :echo diff(['abc', 'def', 'ghi'], ['abx', 'rrr', 'xhi'], {'output': 'indices'})
+   [{'from_idx': 0, 'from_count': 3, 'to_idx': 0, 'to_count': 3}]
+
+  " few lines added at the beginning
+  :echo diff(['ghi'], ['abc', 'def', 'ghi'], {'output': 'indices'})
+   [{'from_idx': 0, 'from_count': 0, 'to_idx': 0, 'to_count': 2}]
+
+  " few lines removed from the beginning
+  :echo diff(['abc', 'def', 'ghi'], ['ghi'], {'output': 'indices'})
+   [{'from_idx': 0, 'from_count': 2, 'to_idx': 0, 'to_count': 0}]
+
+  " few lines added in the middle
+  :echo diff(['abc', 'jkl'], ['abc', 'def', 'ghi', 'jkl'], {'output': 'indices'})
+   [{'from_idx': 1, 'from_count': 0, 'to_idx': 1, 'to_count': 2}]
+
+  " few lines removed in the middle
+  :echo diff(['abc', 'def', 'ghi', 'jkl'], ['abc', 'jkl'], {'output': 'indices'})
+   [{'from_idx': 1, 'from_count': 2, 'to_idx': 1, 'to_count': 0}]
+
+  " few lines added at the end
+  :echo diff(['abc'], ['abc', 'def', 'ghi'], {'output': 'indices'})
+   [{'from_idx': 1, 'from_count': 0, 'to_idx': 1, 'to_count': 2}]
+
+  " few lines removed from the end
+  :echo diff(['abc', 'def', 'ghi'], ['abc'], {'output': 'indices'})
+   [{'from_idx': 1, 'from_count': 2, 'to_idx': 1, 'to_count': 0}]
+
+  " disjointed changes
+  :echo diff(['ab', 'def', 'ghi', 'jkl'], ['abc', 'def', 'ghi', 'jk'], {'output': 'indices', 'context': 0})
+   [{'from_idx': 0, 'from_count': 1, 'to_idx': 0, 'to_count': 1},
+    {'from_idx': 3, 'from_count': 1, 'to_idx': 3, 'to_count': 1}]
+
+  " disjointed changes with context length 1
+  :echo diff(['ab', 'def', 'ghi', 'jkl'], ['abc', 'def', 'ghi', 'jk'], {'output': 'indices', 'context': 1})
+   [{'from_idx': 0, 'from_count': 4, 'to_idx': 0, 'to_count': 4}]
+
+<
+
  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/editing.txt

@@ -1,4 +1,4 @@
-*editing.txt*   For Vim version 9.1.  Last change: 2023 Sep 27
+*editing.txt*   For Vim version 9.1.  Last change: 2024 Jan 14
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1329,8 +1329,9 @@ b:browsefilter variable.  You would most likely set b:browsefilter in a
 filetype plugin, so that the browse dialog would contain entries related to
 the type of file you are currently editing.  Disadvantage: This makes it
 difficult to start editing a file of a different type.  To overcome this, you
-may want to add "All Files\t*.*\n" as the final filter, so that the user can
-still access any desired file.
+may want to add "All Files (*.*)\t*\n" as the final filter on Windows or "All
+Files (*)\t*\n" on other platforms, so that the user can still access any
+desired file.
 
 To avoid setting browsefilter when Vim does not actually support it, you can
 use has("browsefilter"): >

runtime/doc/eval.txt

@@ -1,4 +1,4 @@
-*eval.txt*	For Vim version 9.1.  Last change: 2023 Dec 09
+*eval.txt*	For Vim version 9.1.  Last change: 2024 Mar 20
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -303,10 +303,15 @@ List concatenation ~
 							*list-concatenation*
 Two lists can be concatenated with the "+" operator: >
 	:let longlist = mylist + [5, 6]
-	:let mylist += [7, 8]
+	:let longlist = [5, 6] + mylist
+To prepend or append an item, turn it into a list by putting [] around it.
 
-To prepend or append an item, turn the item into a list by putting [] around
-it.  To change a list in-place, refer to |list-modification| below.
+A list can be concatenated with another one in-place using |:let+=| or
+|extend()|: >
+	:let mylist += [7, 8]
+	:call extend(mylist, [7, 8])
+<
+See |list-modification| below for more about changing a list in-place.
 
 
 Sublist ~
@@ -425,6 +430,18 @@ To change part of a list you can specify the first and last item to be
 modified.  The value must at least have the number of items in the range: >
 	:let list[3:5] = [3, 4, 5]
 
+To add items to a List in-place, you can use |:let+=| (|list-concatenation|): >
+	:let listA = [1, 2]
+	:let listA += [3, 4]
+<
+When two variables refer to the same List, changing one List in-place will
+cause the referenced List to be changed in-place: >
+	:let listA = [1, 2]
+	:let listB = listA
+	:let listB += [3, 4]
+	:echo listA
+	[1, 2, 3, 4]
+<
 Adding and removing items from a list is done with functions.  Here are a few
 examples: >
 	:call insert(list, 'a')		" prepend item 'a'
@@ -745,12 +762,15 @@ This calls Doit() with 0x11, 0x22 and 0x33.
 
 
 Blob concatenation ~
-
+							*blob-concatenation*
 Two blobs can be concatenated with the "+" operator: >
 	:let longblob = myblob + 0z4455
+	:let longblob = 0z4455 + myblob
+<
+A blob can be concatenated with another one in-place using |:let+=|: >
 	:let myblob += 0z6677
-
-To change a blob in-place see |blob-modification| below.
+<
+See |blob-modification| below for more about changing a blob in-place.
 
 
 Part of a blob ~
@@ -793,6 +813,18 @@ To change part of a blob you can specify the first and last byte to be
 modified.  The value must have the same number of bytes in the range: >
 	:let blob[3:5] = 0z334455
 
+To add items to a Blob in-place, you can use |:let+=| (|blob-concatenation|): >
+	:let blobA = 0z1122
+	:let blobA += 0z3344
+<
+When two variables refer to the same Blob, changing one Blob in-place will
+cause the referenced Blob to be changed in-place: >
+	:let blobA = 0z1122
+	:let blobB = blobA
+	:let blobB += 0z3344
+	:echo blobA
+	0z11223344
+<
 You can also use the functions |add()|, |remove()| and |insert()|.
 
 
@@ -2005,9 +2037,14 @@ v:collate	The current locale setting for collation order of the runtime
 								*v:colornames*
 v:colornames    A dictionary that maps color names to hex color strings. These
 		color names can be used with the |highlight-guifg|,
-		|highlight-guibg|, and |highlight-guisp| parameters. Updating
-		an entry in v:colornames has no immediate effect on the syntax
-		highlighting. The highlight commands (probably in a
+		|highlight-guibg|, and |highlight-guisp| parameters.
+
+		The key values in the dictionary (the color names) should be
+		lower cased, because Vim looks up a color by its lower case
+		name.
+
+		Updating an entry in v:colornames has no immediate effect on
+		the syntax highlighting. The highlight commands (probably in a
 		colorscheme script) need to be re-evaluated in order to use
 		the updated color values. For example: >
 
@@ -2039,6 +2076,10 @@ v:colornames    A dictionary that maps color names to hex color strings. These
 		both automatically load all `colors/lists/default.vim` color
 		scripts.
 
+		You can make changes to that file, but make sure to add new
+		keys instead of updating existing ones, otherwise Vim will skip
+		loading the file (thinking is hasn't been changed).
+
 				*v:completed_item* *completed_item-variable*
 v:completed_item
 		|Dictionary| containing the |complete-items| for the most
@@ -2568,8 +2609,9 @@ v:termresponse	The escape sequence returned by the terminal for the |t_RV|
 		'c', with only digits and ';' in between.
 		When this option is set, the TermResponse autocommand event is
 		fired, so that you can react to the response from the
-		terminal.  You can use |terminalprops()| to see what Vim
-		figured out about the terminal.
+		terminal.  The TermResponseAll event is also fired, with
+		<amatch> set to "version".  You can use |terminalprops()| to see
+		what Vim figured out about the terminal.
 		The response from a new xterm is: "<Esc>[> Pp ; Pv ; Pc c".  Pp
 		is the terminal type: 0 for vt100 and 1 for vt220.  Pv is the
 		patch level (since this was introduced in patch 95, it's
@@ -2581,27 +2623,37 @@ v:termresponse	The escape sequence returned by the terminal for the |t_RV|
 						*v:termblinkresp*
 v:termblinkresp	The escape sequence returned by the terminal for the |t_RC|
 		termcap entry.  This is used to find out whether the terminal
-		cursor is blinking. This is used by |term_getcursor()|.
+		cursor is blinking. This is used by |term_getcursor()|.  When
+		this option is set, the TermResponseAll autocommand event is
+		fired, with <amatch> set to "cursorblink".
 
 						*v:termstyleresp*
 v:termstyleresp	The escape sequence returned by the terminal for the |t_RS|
 		termcap entry.  This is used to find out what the shape of the
-		cursor is.  This is used by |term_getcursor()|.
+		cursor is.  This is used by |term_getcursor()|.  When this
+		option is set, the TermResponseAll autocommand event is fired,
+		with <amatch> set to "cursorshape".
 
 						*v:termrbgresp*
 v:termrbgresp	The escape sequence returned by the terminal for the |t_RB|
 		termcap entry.  This is used to find out what the terminal
-		background color is, see 'background'.
+		background color is; see 'background'.  When this option is
+		set, the TermResponseAll autocommand event is fired, with
+		<amatch> set to "background".
 
 						*v:termrfgresp*
 v:termrfgresp	The escape sequence returned by the terminal for the |t_RF|
 		termcap entry.  This is used to find out what the terminal
-		foreground color is.
+		foreground color is.  When this option is set, the
+		TermResponseAll autocommand event is fired, with <amatch> set
+		to "foreground".
 
 						*v:termu7resp*
 v:termu7resp	The escape sequence returned by the terminal for the |t_u7|
 		termcap entry.  This is used to find out what the terminal
-		does with ambiguous width characters, see 'ambiwidth'.
+		does with ambiguous width characters, see 'ambiwidth'.  When
+		this option is set, the TermResponseAll autocommand event is
+		fired, with <amatch> set to "ambiguouswidth".
 
 					*v:testing* *testing-variable*
 v:testing	Must be set before using `test_garbagecollect_now()`.
@@ -2793,6 +2845,8 @@ declarations and assignments do not use a command.  |vim9-declaration|
 :let {var} ..= {expr1}	Like ":let {var} = {var} .. {expr1}".
 			These fail if {var} was not set yet and when the type
 			of {var} and {expr1} don't fit the operator.
+			`+=` modifies a |List| or a |Blob| in-place instead of
+			creating a new one.
 			`.=` is not supported with Vim script version 2 and
 			later, see |vimscript-version|.
 

runtime/doc/filetype.txt

@@ -1,4 +1,4 @@
-*filetype.txt*  For Vim version 9.1.  Last change: 2024 Jan 01
+*filetype.txt*	For Vim version 9.1.  Last change: 2024 Feb 14
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -148,6 +148,7 @@ variables can be used to overrule the filetype used for certain extensions:
 	*.cls		g:filetype_cls
 	*.csh		g:filetype_csh		|ft-csh-syntax|
 	*.dat		g:filetype_dat
+	*.def		g:filetype_def
 	*.f		g:filetype_f		|ft-forth-syntax|
 	*.frm		g:filetype_frm		|ft-form-syntax|
 	*.fs		g:filetype_fs		|ft-forth-syntax|
@@ -495,7 +496,7 @@ g:changelog_new_date_format
 				%%	insert a single '%' character
 				%d	insert the date from above
 				%u	insert the user from above
-                                %p	insert result of b:changelog_entry_prefix
+				%p	insert result of b:changelog_entry_prefix
 				%c	where to position cursor when done
 			The default is "%d  %u\n\n\t* %p%c\n\n", which produces
 			something like (| is where cursor will be, unless at
@@ -509,7 +510,7 @@ g:changelog_new_entry_format
 			The format used when creating a new entry.
 			The following table describes special tokens in the
 			string:
-                                %p	insert result of b:changelog_entry_prefix
+				%p	insert result of b:changelog_entry_prefix
 				%c	where to position cursor when done
 			The default is "\t*%c", which produces something
 			similar to >
@@ -563,6 +564,18 @@ under it.  If not found, a new entry and item is prepended to the beginning of
 the Changelog.
 
 
+ASCIIDOC						*ft-asciidoc-plugin*
+
+To enable |folding| use this: >
+	let g:asciidoc_folding = 1
+
+To disable nesting of folded headers use this: >
+	let g:asciidoc_foldnested = 0
+
+To disable folding everything under the title use this: >
+	let asciidoc_fold_under_title = 0
+
+
 FORTRAN							*ft-fortran-plugin*
 
 Options:

runtime/doc/ft_ada.txt

@@ -172,7 +172,7 @@ GNAT OBJECT ~
 							       *g:gnat.Make()*
 g:gnat.Make()
 		Calls |g:gnat.Make_Command| and displays the result inside a
-               |quickfix| window.
+		|quickfix| window.
 
 							     *g:gnat.Pretty()*
 g:gnat.Pretty()

runtime/doc/ft_sql.txt

@@ -371,7 +371,7 @@ This command breaks down as: >
     'sqlKeyword'	   - Display the items for the sqlKeyword highlight
 			     group
     'sqlKeyword\w*'	   - A second option available with Vim 7.4 which
-                             uses a regular expression to determine which
+			     uses a regular expression to determine which
 			     syntax groups to use
     )<CR>		   - Execute the :let command
     <C-X><C-O>		   - Trigger the standard omni completion key stroke.

runtime/doc/gui_w32.txt

@@ -1,4 +1,4 @@
-*gui_w32.txt*   For Vim version 9.1.  Last change: 2022 Mar 09
+*gui_w32.txt*   For Vim version 9.1.  Last change: 2024 Jan 23
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -454,4 +454,38 @@ You may need to get the vim16x16.xpm file from github:
 https://github.com/vim/vim/blob/master/runtime/vim16x16.xpm
 
 
+Keycode translation strategy    *w32-experimental-keycode-trans-strategy*
+
+In Patch v8.2.4807 W32 GVIM was changed over to experimental keycode
+translation method with the aim to be able to use more keyboard shortcuts and
+especially supporting non-standard keyboard layouts. In order to implement
+this support Win API TranslateMessage() call was dropped, and instead the
+recognition of keycode was changed over to ToUnicode() Win API call. This
+approach uncovered numerous corner cases, which are apparently covered by
+TranslateMessage() implementation, each of it is necessary to be dealt with on
+an individual basis. Therefore the decision was taken to declare this
+functionality experimental for the time being and to recover "classic" keycode
+translation method as default again.
+
+Discussion about use of "experimental" keycode translation method will
+probably last some time yet. In the meantime, if you are impacted by this
+change over back to "classic" keycode translation method in W32 GVIM, you can
+enable "experimental" translation method again in your vimrc using following
+snippet:
+>
+  :call test_mswin_event('set_keycode_trans_strategy', {'strategy': 'experimental'})
+<
+Similarly, in case you need to turn back "classic" keycode translation method
+(for example for testing purposes), please use:
+>
+  :call test_mswin_event('set_keycode_trans_strategy', {'strategy': 'classic'})
+<
+Alternatively (this method is especially useful for the TINY GVIM build, where
+test_mswin_event() cannot be called), an environment variable
+VIM_KEYCODE_TRANS_STRATEGY can be set to the desired value ("experimental" or
+"classic"), to override the default, e.g., type in dos prompt:
+>
+        set VIM_KEYCODE_TRANS_STRATEGY=experimental
+        gvim.exe
+<
  vim:tw=78:sw=4:ts=8:noet:ft=help:norl:

runtime/doc/gui_x11.txt

@@ -1,4 +1,4 @@
-*gui_x11.txt*   For Vim version 9.1.  Last change: 2022 Apr 03
+*gui_x11.txt*   For Vim version 9.1.  Last change: 2024 Jan 30
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -580,7 +580,8 @@ command line argument).
 							*gui-x11-kde*
 There is no KDE version of Vim.  There has been some work on a port using the
 Qt toolkit, but it never worked properly and it has been abandoned.  Work
-continues on Yzis: https://github.com/chrizel/Yzis.
+continues on Yzis: https://github.com/chrizel/Yzis but it seems also
+abandoned.
 
 ==============================================================================
 8. Compiling						*gui-x11-compiling*
@@ -647,6 +648,15 @@ versions.  This will cause problems.  For example, using header files for
 X11R5 with a library for X11R6 probably doesn't work (although the linking
 won't give an error message, Vim will crash later).
 
+							*gui-wayland*
+Initial support for the Wayland display server protocol has landed in patch
+9.1.0064. To enable it, you need to set the environment variable
+"$GVIM_ENABLE_WAYLAND" in your shell.
+
+Note: The Wayland protocol is subject to some restrictions, so the following
+functions won't work: |getwinpos()|, |getwinposx()|, |getwinposy()| and the
+|v:windowid| variable won't be available.
+
 ==============================================================================
 9. X11 selection mechanism				*x11-selection*
 

runtime/doc/if_ole.txt

@@ -39,9 +39,9 @@ instance), code similar to the following should be used:
 	$vim = new Win32::OLE 'Vim.Application';
 
 [C#] >
-        // Add a reference to Vim in your project.
-        // Choose the COM tab.
-        // Select "Vim Ole Interface 1.1 Type Library"
+	// Add a reference to Vim in your project.
+	// Choose the COM tab.
+	// Select "Vim Ole Interface 1.1 Type Library"
 	Vim.Vim vimobj = new Vim.Vim();
 
 Vim does not support acting as a "hidden" OLE server, like some other OLE

runtime/doc/indent.txt

@@ -1,4 +1,4 @@
-*indent.txt*    For Vim version 9.1.  Last change: 2023 Dec 27
+*indent.txt*    For Vim version 9.1.  Last change: 2024 Feb 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1255,5 +1255,11 @@ Example of configuration: >
 This variable is equivalent to `g:vim_indent.line_continuation`.
 It's supported for backward compatibility.
 
+YAML							*ft-yaml-indent*
+
+By default, the yaml indent script does not try to detect multiline scalars.
+If you want to enable this, set the following variable: >
+
+  let g:yaml_indent_multiline_scalar = 1
 
  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/index.txt

@@ -1172,6 +1172,8 @@ tag		command		action ~
 |:>|		:>		shift lines one 'shiftwidth' right
 |:@|		:@		execute contents of a register
 |:@@|		:@@		repeat the previous ":@"
+|:2match|	:2mat[ch]	define a second match to highlight
+|:3match|	:3mat[ch]	define a third match to highlight
 |:Next|		:N[ext]		go to previous file in the argument list
 |:Print|	:P[rint]	print lines
 |:X|		:X		ask for encryption key

runtime/doc/insert.txt

@@ -1,4 +1,4 @@
-*insert.txt*    For Vim version 9.1.  Last change: 2022 Sep 30
+*insert.txt*    For Vim version 9.1.  Last change: 2024 Jan 04
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -168,22 +168,22 @@ CTRL-R CTRL-O {register}			*i_CTRL-R_CTRL-O*
 		auto-indent.  Does the same as pasting with the mouse
 		|<MiddleMouse>|. When the register is linewise this will
 		insert the text above the current line, like with `P`.
-		Does not replace characters!
 		The '.' register (last inserted text) is still inserted as
 		typed.
 		After this command, the '.' register contains the command
 		typed and not the text. I.e., the literals "^R^O" and not the
 		text from the register.
+		Does not replace characters in |Replace-mode|!
 
 CTRL-R CTRL-P {register}			*i_CTRL-R_CTRL-P*
 		Insert the contents of a register literally and fix the
 		indent, like |[<MiddleMouse>|.
-		Does not replace characters!
 		The '.' register (last inserted text) is still inserted as
 		typed.
 		After this command, the '.' register contains the command
 		typed and not the text. I.e., the literals "^R^P" and not the
 		text from the register.
+		Does not replace characters in |Replace-mode|!
 
 						*i_CTRL-T*
 CTRL-T		Insert one shiftwidth of indent at the start of the current

runtime/doc/intro.txt

@@ -1,4 +1,4 @@
-*intro.txt*     For Vim version 9.1.  Last change: 2023 Nov 18
+*intro.txt*     For Vim version 9.1.  Last change: 2024 Jan 25
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -475,7 +475,7 @@ notation	meaning		    equivalent	decimal value(s)	~
 <C-...>		control-key			*control* *ctrl* *<C-*
 <M-...>		alt-key or meta-key		*meta* *alt* *<M-*
 <A-...>		same as <M-...>			*<A-*
-<D-...>		command-key (Macintosh only)	*<D-*
+<D-...>		command-key (Mac) / super (GTK)	*<D-*
 <t_xx>		key with "xx" entry in termcap
 -----------------------------------------------------------------------
 

runtime/doc/maketags.awk

@@ -21,6 +21,13 @@ NR == 1 { nf=split(FILENAME,f,".")
 	gsub(/%/,"\\%");
 
 	nf=split($0,tag,"	");
+	if (counttag[tag[1]] > 0)
+	{
+		print "==============" > "errors.log"
+		print "Duplicate Tag " tag[1] > "errors.log"
+		print "==============" > "errors.log"
+	}
+	counttag[tag[1]]++
 	tagkey[t]=tag[1];tagref[t]=tag[2];tagnum[t]=NR;
 	print $1 "	" $2 "	line " NR >"tags.ref"
 	n=split($2,w,".");

runtime/doc/map.txt

@@ -1,4 +1,4 @@
-*map.txt*       For Vim version 9.1.  Last change: 2024 Jan 04
+*map.txt*       For Vim version 9.1.  Last change: 2024 Jan 25
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -21,9 +21,10 @@ manual.
    1.9 Using mappings				|map-typing|
    1.10 Mapping alt-keys			|:map-alt-keys|
    1.11 Mapping meta-keys			|:map-meta-keys|
-   1.12 Mapping in modifyOtherKeys mode		|modifyOtherKeys|
-   1.13 Mapping with Kitty keyboard protocol	|kitty-keyboard-protocol|
-   1.14 Mapping an operator			|:map-operator|
+   1.12 Mapping super-keys or command keys	|:map-super-keys|
+   1.13 Mapping in modifyOtherKeys mode		|modifyOtherKeys|
+   1.14 Mapping with Kitty keyboard protocol	|kitty-keyboard-protocol|
+   1.15 Mapping an operator			|:map-operator|
 2. Abbreviations		|abbreviations|
 3. Local mappings and functions	|script-local|
 4. User-defined commands	|user-commands|
@@ -591,7 +592,7 @@ displayed in the first line. Also a key map will also display where it was
 last defined.  Example: >
 
 	:verbose map <C-W>*
-        Kitty keyboard protocol: Cleared
+	Kitty keyboard protocol: Cleared
 	n  <C-W>*      * <C-W><C-S>*
 		Last set from /home/abcd/.vimrc
 
@@ -985,8 +986,17 @@ For the Meta modifier the "T" character is used.  For example, to map Meta-b
 in Insert mode: >
 	:imap <T-b> terrible
 
+1.12 MAPPING SUPER-KEYS or COMMAND-KEYS		*:map-super-keys* *:map-cmd-key*
 
-1.12 MAPPING IN modifyOtherKeys mode			*modifyOtherKeys*
+The Super modifier is available in GUI mode (when |gui_running| is 1) for
+GVim on Linux and MacVim on Mac OS. If you're on a Mac, this represents the
+Command key, on Linux with the GTK GUI it represents the Super key.
+The character "D" is used for the Super / Command modifier.
+
+For example, to map Command-b in Insert mode: >
+	:imap <D-b> barritone
+
+1.13 MAPPING IN modifyOtherKeys mode			*modifyOtherKeys*
 
 Xterm and a few other terminals can be put in a mode where keys with modifiers
 are sent with a special escape code.  Vim recognizes these codes and can then
@@ -1048,7 +1058,7 @@ When the 'esckeys' option is off, then modifyOtherKeys will be disabled in
 Insert mode to avoid every key with a modifier causing Insert mode to end.
 
 
-1.13 MAPPING WITH KITTY KEYBOARD PROTOCOL	 *kitty-keyboard-protocol*
+1.14 MAPPING WITH KITTY KEYBOARD PROTOCOL	 *kitty-keyboard-protocol*
 
 If the value of 'term' contains "kitty" then Vim will send out an escape
 sequence to enable the Kitty keyboard protocol.  This can be changed with the
@@ -1075,7 +1085,7 @@ translated).  The meaning of {value}:
 			previous state is unknown
 
 
-1.14 MAPPING AN OPERATOR				*:map-operator*
+1.15 MAPPING AN OPERATOR				*:map-operator*
 
 An operator is used before a {motion} command.  To define your own operator
 you must create a mapping that first sets the 'operatorfunc' option and then

runtime/doc/message.txt

@@ -1,4 +1,4 @@
-*message.txt*   For Vim version 9.1.  Last change: 2023 Dec 20
+*message.txt*   For Vim version 9.1.  Last change: 2024 Mar 13
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -122,6 +122,13 @@ wiped out a buffer which contains a mark or is referenced in another way.
 You cannot have two buffers with exactly the same name.  This includes the
 path leading to the file.
 
+							*E1513*
+  Cannot switch buffer. 'winfixbuf' is enabled ~
+
+If a window has 'winfixbuf' enabled, you cannot change that window's current
+buffer. You need to set 'nowinfixbuf' before continuing. You may use [!] to
+force the window to switch buffers, if your command supports it.
+
 							*E72*
   Close error on swap file ~
 

runtime/doc/options.txt

@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 9.1.  Last change: 2024 Jan 03
+*options.txt*	For Vim version 9.1.  Last change: 2024 Mar 11
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -333,6 +333,7 @@ created, thus they behave slightly differently:
 	Option		Reason	~
 	'previewwindow'	there can only be a single one
 	'scroll'	specific to existing window
+	'winfixbuf'	specific to existing window
 	'winfixheight'	specific to existing window
 	'winfixwidth'	specific to existing window
 
@@ -365,11 +366,24 @@ created, thus they behave slightly differently:
 			For a global option the global value is
 			shown (but that might change in the future).
 
-:setl[ocal] {option}<	Set the local value of {option} to its global value by
-			copying the value.
+:se[t] {option}<	Set the effective value of {option} to its global
+			value.
+			For string |global-local| options, the local value is
+			removed, so that the global value will be used.
+			For all other options, the global value is copied to
+			the local value.
 
-:se[t] {option}<	For |global-local| options: Remove the local value of
-			{option}, so that the global value will be used.
+:setl[ocal] {option}<	Set the effective value of {option} to its global
+			value.
+			For number and boolean |global-local| options, the
+			local value is removed, so that the global value will
+			be used.
+			For all other options, including string |global-local|
+			options, the global value is copied to the local
+			value.
+
+Note that the behaviour for |global-local| options is slightly different
+between string and number-based options.
 
 							*:setg* *:setglobal*
 :setg[lobal][!] ...	Like ":set" but set only the global value for a local
@@ -2919,7 +2933,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 				Use the indent heuristic for the internal
 				diff library.
 
-                algorithm:{text} Use the specified diff algorithm with the
+		algorithm:{text} Use the specified diff algorithm with the
 				internal diff engine. Currently supported
 				algorithms are:
 				myers      the default algorithm
@@ -3478,12 +3492,10 @@ A jump table for the options with a short description can be found at |Q_op|.
 						*'fillchars'* *'fcs'*
 'fillchars' 'fcs'	string	(default "vert:|,fold:-,eob:~")
 			global or local to window |global-local|
-			{not available when compiled without the |+folding|
-			feature}
 	Characters to fill the statuslines, vertical separators and special
 	lines in the window.
 	It is a comma-separated list of items.  Each item has a name, a colon
-	and the value of that item:
+	and the value of that item: |E1511|
 
 	  item name	default		Used for ~
 	  stl		' '		statusline of the current window
@@ -3504,7 +3516,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 <
 	For the "stl", "stlnc", "foldopen", "foldclose" and "foldsep" items
 	single-byte and multibyte characters are supported.  But double-width
-	characters are not supported.
+	characters are not supported. |E1512|
 
 	The highlighting used for these items:
 	  item name	highlight group ~
@@ -4002,7 +4014,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 						*'guiligatures'* *'gli'* *E1243*
 'guiligatures' 'gli'	string	(default "")
 			global
-			{only for GTK GUI}
+			{only for GTK and Win32 GUI}
 	List of ASCII characters that, when combined together, can create more
 	complex shapes. Each character must be a printable ASCII character
 	with a value in the 32-127 range.
@@ -5243,7 +5255,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 'listchars' 'lcs'	string	(default "eol:$")
 			global or local to window |global-local|
 	Strings to use in 'list' mode and for the |:list| command.  It is a
-	comma-separated list of string settings.
+	comma-separated list of string settings. *E1511*
 							*lcs-eol*
 	  eol:c		Character to show at the end of each line.  When
 			omitted, there is no extra character at the end of the
@@ -5319,7 +5331,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 	The characters ':' and ',' should not be used.  UTF-8 characters can
 	be used when 'encoding' is "utf-8", otherwise only printable
-	characters are allowed.  All characters must be single width.
+	characters are allowed.  All characters must be single width. *E1512*
 
 	Each character can be specified as hex: >
 		set listchars=eol:\\x24
@@ -6456,7 +6468,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	this option at the default "on".  Only switch it off when working with
 	old Vi scripts.
 
-                                               *'renderoptions'* *'rop'*
+						*'renderoptions'* *'rop'*
 'renderoptions' 'rop'	string  (default: empty)
 			global
 			{only available when compiled with GUI and DIRECTX on
@@ -7242,7 +7254,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	  q	use "recording" instead of "recording @a"		*shm-q*
 	  F	don't give the file info when editing a file, like	*shm-F*
 		`:silent` was used for the command; note that this also
-		affects messages from autocommands
+		affects messages from autocommands and 'autoread' reloading
 	  S	do not show search count message when searching, e.g.	*shm-S*
 		"[1/5]"
 
@@ -8010,6 +8022,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 			"split" when both are present.
 	   uselast	If included, jump to the previously used window when
 			jumping to errors with |quickfix| commands.
+	If a window has 'winfixbuf' enabled, 'switchbuf' is currently not
+	applied to the split window.
 
 						*'synmaxcol'* *'smc'*
 'synmaxcol' 'smc'	number	(default 3000)
@@ -8583,8 +8597,11 @@ A jump table for the options with a short description can be found at |Q_op|.
 	will not work (except in the GUI).
 	If the title cannot be restored, it is set to the value of 'titleold'.
 	You might want to restore the title outside of Vim then.
-	When using an xterm from a remote machine you can use this command:
+	When using an xterm from a remote machine you can use this command: >
+
 	    rsh machine_name xterm -display $DISPLAY &
+	    ssh -X machine_name xterm &
+<
 	then the WINDOWID environment variable should be inherited and the
 	title of the window should change back to what it should be after
 	exiting Vim.
@@ -9457,6 +9474,15 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Note: Do not confuse this with the height of the Vim window, use
 	'lines' for that.
 
+						*'winfixbuf'*
+'winfixbuf' 'wfb'	boolean	(default off)
+			local to window
+	If enabled, the window and the buffer it is displaying are paired.
+	For example, attempting to change the buffer with |:edit| will fail.
+	Other commands which change a window's buffer such as |:cnext| will
+	also skip any window with 'winfixbuf' enabled.  However if an Ex
+	command has a "!" modifier, it can force switching buffers.
+
 			*'winfixheight'* *'wfh'* *'nowinfixheight'* *'nowfh'*
 'winfixheight' 'wfh'	boolean	(default off)
 			local to window  |local-noglobal|

runtime/doc/os_vms.txt

@@ -753,7 +753,7 @@ Solution 2.  Different directories: >
 	$      say "IA64 platform"
 	$      define/nolog VIM RF10:[UTIL.IA64_EXE] ! IA64 executables
 	$ endif
-        $! VIMRUNTIME must be defined in order to find runtime files
+	$! VIMRUNTIME must be defined in order to find runtime files
 	$ define/nolog VIMRUNTIME RF10:[UTIL.VIM73]
 
 A good example for this approach is the [GNU]gnu_tools.com script from

runtime/doc/pi_netrw.txt

@@ -1,4 +1,4 @@
-*pi_netrw.txt*  For Vim version 9.1.  Last change: 2023 May 14
+*pi_netrw.txt*  For Vim version 9.1.  Last change: 2023 Jun 19
 
 	    ------------------------------------------------
 	    NETRW REFERENCE MANUAL    by Charles E. Campbell
@@ -642,7 +642,7 @@ additional prompting.
 	work with your ftp client.  Otherwise the script will
 	prompt for user-id and password.
 
-        (*3) for ftp, "machine" may be machine#port or machine:port
+	(*3) for ftp, "machine" may be machine#port or machine:port
 	if a different port is needed than the standard ftp port
 
 	(*4) for http:..., if wget is available it will be used.  Otherwise,
@@ -788,7 +788,7 @@ below, a {netfile} is a URL to a remote file.
 		(related: |netrw-userpass|)
 
 :NetrwSettings  This command is described in |netrw-settings| -- used to
-                display netrw settings and change netrw behavior.
+		display netrw settings and change netrw behavior.
 
 
 ==============================================================================
@@ -1625,10 +1625,8 @@ A further approach is to delete files which match a pattern.
       This will cause the matching files to be marked.  Then,
       press "D".
 
-If your vim has 7.4 with patch#1107, then |g:netrw_localrmdir| no longer
-is used to remove directories; instead, vim's |delete()| is used with
-the "d" option.  Please note that only empty directories may be deleted
-with the "D" mapping.  Regular files are deleted with |delete()|, too.
+Please note that only empty directories may be deleted with the "D" mapping.
+Regular files are deleted with |delete()|, too.
 
 The |g:netrw_rm_cmd|, |g:netrw_rmf_cmd|, and |g:netrw_rmdir_cmd| variables are
 used to control the attempts to remove remote files and directories.  The
@@ -1647,8 +1645,7 @@ to remove it again using the g:netrw_rmf_cmd variable.  Its default value is:
 	|g:netrw_rmf_cmd|: ssh HOSTNAME rm -f
 
 Related topics: |netrw-d|
-Associated setting variable: |g:netrw_localrmdir| |g:netrw_rm_cmd|
-                             |g:netrw_rmdir_cmd|   |g:netrw_ssh_cmd|
+Associated setting variable: |g:netrw_rm_cmd| |g:netrw_ssh_cmd|
 
 
 *netrw-explore*  *netrw-hexplore* *netrw-nexplore* *netrw-pexplore*
@@ -1691,7 +1688,11 @@ DIRECTORY EXPLORATION COMMANDS  {{{2
 	  to 2; edits will thus preferentially be made in window#2.
 
 	  The [N] specifies a |g:netrw_winsize| just for the new :Lexplore
-	  window.
+	  window. That means that
+	    if [N] < 0 : use |N| columns for the Lexplore window
+	    if [N] = 0 : a normal split is made
+	    if [N] > 0 : use N% of the current window will be used for the
+	                 new window
 
 	  Those who like this method often also like tree style displays;
 	  see |g:netrw_liststyle|.
@@ -2863,14 +2864,6 @@ your browsing preferences.  (see also: |netrw-settings|)
 				=" /c move"                     Windows
 				Options for |g:netrw_localmovecmd|
 
-  *g:netrw_localrmdir*		="rmdir"        Linux/Unix/MacOS/Cygwin
-				=expand("$COMSPEC")             Windows
-				Remove directory command (rmdir)
-				This variable is only used if your vim is
-				earlier than 7.4 or if your vim doesn't
-				have patch#1107.  Otherwise, |delete()|
-				is used with the "d" option.
-
   *g:netrw_maxfilenamelen*	=32 by default, selected so as to make long
 				    listings fit on 80 column displays.
 				If your screen is wider, and you have file
@@ -3781,7 +3774,7 @@ Example: Clear netrw's marked file list via a mapping on gu >
 	     Netrw uses several system level commands to do things (see
 
 		 |g:netrw_localcopycmd|, |g:netrw_localmovecmd|,
-		 |g:netrw_localrmdir|, |g:netrw_mkdir_cmd|).
+		 |g:netrw_mkdir_cmd|).
 
 	    You may need to adjust the default commands for one or more of
 	    these commands by setting them properly in your .vimrc.  Another
@@ -3907,8 +3900,13 @@ netrw:
 ==============================================================================
 12. History						*netrw-history* {{{1
 
-	v172:	Apr 22, 2023	* removed g:netrw_localrmdiropt
-				  removed g:netrw_localrmdir
+	v172:	Sep 02, 2021	* (Bram Moolenaar) Changed "l:go" to "go"
+				* (Bram Moolenaar) no need for "b" in
+				  netrw-safe guioptions
+		Nov 15, 2021	* removed netrw_localrm and netrw_localrmdir
+				  references
+		Aug 18, 2022	* (Miguel Barro) improving compatability with
+				  powershell
 	v171:	Oct 09, 2020	* included code in s:NetrwOptionsSafe()
 				  to allow |'bh'| to be set to delete when
 				  rather than hide when g:netrw_fastbrowse
@@ -3996,7 +3994,6 @@ netrw:
 				  |g:netrw_localcopydircmdopt|
 				  |g:netrw_localmkdiropt|
 				  |g:netrw_localmovecmdopt|
-				  g:netrw_localrmdiropt
 		Nov 21, 2016	* (mattn) provided a patch for preview; swapped
 				  winwidth() with winheight()
 		Nov 22, 2016	* (glacambre) reported that files containing
@@ -4056,7 +4053,7 @@ netrw:
 				  refreshes.  However, inside a |:map-<expr>|,
 				  tab and window changes are disallowed.  Fixed.
 				  (affects netrw's s:LocalBrowseRefresh())
-				* |g:netrw_localrmdir| not used any more, but
+				* g:netrw_localrmdir not used any more, but
 				  the relevant patch that causes |delete()| to
 				  take over was #1107 (not #1109).
 				* |expand()| is now used on |g:netrw_home|;

runtime/doc/quickfix.txt

@@ -378,14 +378,14 @@ processing a quickfix or location list command, it will be aborted.
 			List all errors.
 
 :cl[ist]! +{count}	List the current and next {count} error lines.  This
-                        is useful to see unrecognized lines after the current
+			is useful to see unrecognized lines after the current
 			one.  For example, if ":clist" shows:
-        8384 testje.java:252: error: cannot find symbol ~
-                        Then using ":cl! +3" shows the reason:
-        8384 testje.java:252: error: cannot find symbol ~
-        8385:   ZexitCode = Fmainx(); ~
-        8386:               ^ ~
-        8387:   symbol:   method Fmainx() ~
+	8384 testje.java:252: error: cannot find symbol ~
+			Then using ":cl! +3" shows the reason:
+	8384 testje.java:252: error: cannot find symbol ~
+	8385:   ZexitCode = Fmainx(); ~
+	8386:               ^ ~
+	8387:   symbol:   method Fmainx() ~
 
 :lli[st] [from] [, [to]]				*:lli* *:llist*
 			Same as ":clist", except the location list for the

runtime/doc/quickref.txt

@@ -1,4 +1,4 @@
-*quickref.txt*  For Vim version 9.1.  Last change: 2023 Dec 05
+*quickref.txt*  For Vim version 9.1.  Last change: 2024 Mar 03
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1005,6 +1005,7 @@ Short explanation of each option:		*option-list*
 'winaltkeys'	  'wak'     when the windows system handles ALT keys
 'wincolor'	  'wcr'	    window-local highlighting
 'window'	  'wi'	    nr of lines to scroll for CTRL-F and CTRL-B
+'winfixbuf'	  'wfb'     keep window focused on a single buffer
 'winfixheight'	  'wfh'     keep window height when opening/closing windows
 'winfixwidth'	  'wfw'     keep window width when opening/closing windows
 'winheight'	  'wh'	    minimum number of lines for the current window

runtime/doc/starting.txt

@@ -1,4 +1,4 @@
-*starting.txt*  For Vim version 9.1.  Last change: 2023 Oct 20
+*starting.txt*  For Vim version 9.1.  Last change: 2024 Mar 13
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -113,10 +113,10 @@ Additional characters may follow, they are ignored.  For example, you can have
 "gvim-8" to start the GUI.  You must have an executable by that name then, of
 course.
 
-On Unix, you would normally have one executable called Vim, and links from the
-different startup-names to that executable.  If your system does not support
-links and you do not want to have several copies of the executable, you could
-use an alias instead.  For example: >
+On Unix, you would normally have one executable called "vim", and links from
+the different startup-names to that executable.  If your system does not
+support links and you do not want to have several copies of the executable,
+you could use an alias instead.  For example, in a C shell descendant: >
 	alias view   vim -R
 	alias gvim   vim -g
 <
@@ -194,7 +194,7 @@ a slash.  Thus "-R" means recovery and "-/R" readonly.
 
 --cmd {command}						*--cmd*
 		{command} will be executed before processing any vimrc file.
-		Otherwise it acts like -c {command}.  You can use up to 10 of
+		Otherwise, it acts like -c {command}.  You can use up to 10 of
 		these commands, independently from "-c" commands.
 
 							*-S*
@@ -279,7 +279,7 @@ a slash.  Thus "-R" means recovery and "-/R" readonly.
 
 							*-s-ex*
 -s		Silent or batch mode.  Only when Vim was started as "ex" or
-		when preceded with the "-e" argument.  Otherwise see |-s|,
+		when preceded with the "-e" argument.  Otherwise, see |-s|,
 		which does take an argument while this use of "-s" doesn't.
 		To be used when Vim is used to execute Ex commands from a file
 		instead of a terminal.  Switches off most prompts and
@@ -289,12 +289,12 @@ a slash.  Thus "-R" means recovery and "-/R" readonly.
 			:list
 			:number
 			:set      to display option values.
-		When 'verbose' is non-zero messages are printed (for
+		When 'verbose' is non-zero, messages are printed (for
 		debugging, to stderr).
 		'term' and $TERM are not used.
-		If Vim appears to be stuck try typing "qa!<Enter>".  You don't
-		get a prompt thus you can't see Vim is waiting for you to type
-		something.
+		If Vim appears to be stuck, try typing "qa!<Enter>".  You
+		don't get a prompt, thus you can't see Vim is waiting for you
+		to type something.
 		Initializations are skipped (except the ones given with the
 		"-u" argument).
 		Example: >
@@ -317,7 +317,7 @@ a slash.  Thus "-R" means recovery and "-/R" readonly.
 							*-A*
 -A		Arabic mode.  Sets the 'arabic' option on.  {only when
 		compiled with the |+arabic| features (which include
-		|+rightleft|), otherwise Vim gives an error message
+		|+rightleft|), otherwise, Vim gives an error message
 		and exits}
 
 							*-F*
@@ -326,7 +326,7 @@ a slash.  Thus "-R" means recovery and "-/R" readonly.
 
 							*-H*
 -H		Hebrew mode.  Sets the 'hkmap' and 'rightleft' options on.
-		{only when compiled with the |+rightleft| feature, otherwise
+		{only when compiled with the |+rightleft| feature, otherwise,
 		Vim gives an error message and exits}
 
 							*-V* *verbose*
@@ -407,7 +407,7 @@ a slash.  Thus "-R" means recovery and "-/R" readonly.
 		few windows will be editing an empty file.
 
 							*-O*
--O[N]		Open N windows, split vertically.  Otherwise it's like -o.
+-O[N]		Open N windows, split vertically.  Otherwise, it's like -o.
 		If both the -o and the -O option are given, the last one on
 		the command line determines how the windows will be split.
 
@@ -483,8 +483,10 @@ a slash.  Thus "-R" means recovery and "-/R" readonly.
 
 		This can be used to start Vim in a special mode, with special
 		mappings and settings.  A shell alias can be used to make
-		this easy to use.  For example: >
-			alias vimc vim -u ~/.c_vimrc !*
+		this easy to use.  For example, in a C shell descendant: >
+			alias vimc 'vim -u ~/.c_vimrc \!*'
+<		And in a Bash shell: >
+			alias vimc='vim -u ~/.c_vimrc'
 <		Also consider using autocommands; see |autocommand|.
 
 		When {vimrc} is equal to "NONE" (all uppercase), all
@@ -544,9 +546,9 @@ a slash.  Thus "-R" means recovery and "-/R" readonly.
 		window title and copy/paste using the X clipboard.  This
 		avoids a long startup time when running Vim in a terminal
 		emulator and the connection to the X server is slow.
-		See |--startuptime| to find out if affects you.
+		See |--startuptime| to find out if this affects you.
 		Only makes a difference on Unix or VMS, when compiled with the
-		|+X11| feature.  Otherwise it's ignored.
+		|+X11| feature.  Otherwise, it's ignored.
 		To disable the connection only for specific terminals, see the
 		'clipboard' option.
 		When the X11 Session Management Protocol (XSMP) handler has
@@ -575,8 +577,8 @@ a slash.  Thus "-R" means recovery and "-/R" readonly.
 		":source!".  When the "scriptout" file already exists, new
 		characters are appended.  See also |complex-repeat|.
 		{scriptout} cannot start with a digit.
-		If you want to record what is typed in a human readable for
-		you can use |ch_logfile()|, It adds "raw key input" lines.
+		If you want to record what is typed in a human readable form,
+		you can use |ch_logfile()|. It adds "raw key input" lines.
 		Also see |--log|.
 
 							*-W*
@@ -666,7 +668,7 @@ If the executable is called "ex", Vim will start in "Ex" mode.  This means it
 will accept only ":" commands.  But when the "-v" argument is given, Vim will
 start in Normal mode anyway.
 
-Additional arguments are available on unix like systems when compiled with
+Additional arguments are available on Unix like systems when compiled with
 X11 GUI support.  See |gui-resources|.
 
 ==============================================================================
@@ -740,7 +742,7 @@ In Evim these options are changed from their default value:
 	:set incsearch		show matches halfway typing a pattern
 	:set mouse=a		use the mouse in all modes
 	:set hlsearch		highlight all matches for a search pattern
-	:set whichwrap+=<,>,[,]  <Left> and <Right> wrap around line breaks
+	:set whichwrap+=<,>,[,]	<Left> and <Right> wrap around line breaks
 	:set guioptions-=a	non-Unix only: don't do auto-select
 
 Key mappings:
@@ -833,7 +835,7 @@ accordingly.  Vim proceeds in this order:
 	initializations until 4. are skipped.  Only the "-u" option is
 	interpreted.
 							*evim.vim*
-     a. If vim was started as |evim| or |eview| or with the |-y| argument, the
+     a. If Vim was started as |evim| or |eview| or with the |-y| argument, the
 	script $VIMRUNTIME/evim.vim will be loaded.
 							*system-vimrc*
      b. For Unix, MS-Windows, VMS, Macintosh and Amiga the system vimrc file
@@ -929,7 +931,7 @@ accordingly.  Vim proceeds in this order:
 	This means that Vim will figure out the values of 'shellpipe' and
 	'shellredir' for you, unless you have set them yourself.
 
-6. Set 'updatecount' to zero, if "-n" command argument used
+6. Set 'updatecount' to zero, if "-n" command argument used.
 
 7. Set binary options
 	If the "-b" flag was given to Vim, the options for binary editing will
@@ -973,7 +975,7 @@ Some hints on using initializations ~
 
 Standard setup:
 Create a vimrc file to set the default settings and mappings for all your edit
-sessions.  Put it in a place so that it will be found by 3b:
+sessions.  Put it in a place so that it will be found by 3b.:
 	~/.vimrc	(Unix)
 	s:.vimrc	(Amiga)
 	$VIM\_vimrc	(Win32)
@@ -1087,11 +1089,11 @@ Avoiding trojan horses ~
 							*trojan-horse*
 While reading the "vimrc" or the "exrc" file in the current directory, some
 commands can be disabled for security reasons by setting the 'secure' option.
-This is always done when executing the command from a tags file.  Otherwise it
-would be possible that you accidentally use a vimrc or tags file that somebody
-else created and contains nasty commands.  The disabled commands are the ones
-that start a shell, the ones that write to a file, and ":autocmd".  The ":map"
-commands are echoed, so you can see which keys are being mapped.
+This is always done when executing the command from a tags file.  Otherwise,
+it would be possible that you accidentally use a vimrc or tags file that
+somebody else created and contains nasty commands.  The disabled commands are
+the ones that start a shell, the ones that write to a file, and ":autocmd".
+The ":map" commands are echoed, so you can see which keys are being mapped.
 	If you want Vim to execute all commands in a local vimrc file, you
 can reset the 'secure' option in the EXINIT or VIMINIT environment variable or
 in the global "exrc" or "vimrc" file.  This is not possible in "vimrc" or
@@ -1248,9 +1250,9 @@ continue if you make it the foreground job again.  On other systems, CTRL-Z
 will start a new shell.  This is the same as the ":sh" command.  Vim will
 continue if you exit from the shell.
 
-In X-windows the selection is disowned when Vim suspends.  this means you
-can't paste it in another application (since Vim is going to sleep an attempt
-to get the selection would make the program hang).
+In the X Window System environment, the selection is disowned when Vim
+suspends.  This means you can't paste it in another application (since Vim is
+going to sleep, an attempt to get the selection would make the program hang).
 
 ==============================================================================
 7. Exiting						*exiting*
@@ -1295,7 +1297,7 @@ will be set to the same values.  The options 'columns', 'endofline',
 dependent.  Note that the options 'binary', 'paste' and 'readonly' are
 included, this might not always be what you want.
 
-When special keys are used in mappings, The 'cpoptions' option will be
+When special keys are used in mappings, the 'cpoptions' option will be
 temporarily set to its Vim default, to avoid the mappings to be
 misinterpreted.  This makes the file incompatible with Vi, but makes sure it
 can be used with different terminals.
@@ -1356,8 +1358,8 @@ All this is {not available when compiled without the |+mksession| feature}.
 							*:mks* *:mksession*
 :mks[ession][!] [file]	Write a Vim script that restores the current editing
 			session.
-			When [!] is included an existing file is overwritten.
-			When [file] is omitted "Session.vim" is used.
+			When [!] is included, an existing file is overwritten.
+			When [file] is omitted, "Session.vim" is used.
 
 The output of ":mksession" is like ":mkvimrc", but additional commands are
 added to the file.  Which ones depends on the 'sessionoptions' option.  The
@@ -1369,16 +1371,16 @@ resulting file, when executed with a ":source" command:
 3. Closes all windows in the current tab page, except the current one; closes
    all tab pages except the current one (this results in currently loaded
    buffers to be unloaded, some may become hidden if 'hidden' is set or
-   otherwise specified); wipes out the current buffer, if it is empty
-   and unnamed.
-4. Restores the current directory if 'sessionoptions' contains "curdir", or
-   sets the current directory to where the Session file is if 'sessionoptions'
-   contains "sesdir".
+   otherwise specified); wipes out the current buffer, if it is empty and
+   unnamed.
+4. Restores the current directory, if 'sessionoptions' contains "curdir", or
+   sets the current directory to where the Session file is, if
+   'sessionoptions' contains "sesdir".
 5. Restores GUI Vim window position, if 'sessionoptions' contains "winpos".
 6. Restores screen size, if 'sessionoptions' contains "resize".
 7. Reloads the buffer list, with the last cursor positions.  If
    'sessionoptions' contains "buffers" then all buffers are restored,
-   including hidden and unloaded buffers.  Otherwise only buffers in windows
+   including hidden and unloaded buffers.  Otherwise, only buffers in windows
    are restored.
 8. Restores all windows with the same layout.  If 'sessionoptions' contains
    "help", help windows are restored.  If 'sessionoptions' contains "blank",
@@ -1405,14 +1407,14 @@ A session includes all tab pages, unless "tabpages" was removed from
 The |SessionLoadPost| autocmd event is triggered after a session file is
 loaded/sourced.
 						*SessionLoad-variable*
-While the session file is loading the SessionLoad global variable is set to 1.
-Plugins can use this to postpone some work until the SessionLoadPost event is
-triggered.
+While the session file is loading, the SessionLoad global variable is set to
+1.  Plugins can use this to postpone some work until the SessionLoadPost event
+is triggered.
 
 							*:mkvie* *:mkview*
 :mkvie[w][!] [file]	Write a Vim script that restores the contents of the
 			current window.
-			When [!] is included an existing file is overwritten.
+			When [!] is included, an existing file is overwritten.
 			When [file] is omitted or is a number from 1 to 9, a
 			name is generated and 'viewdir' prepended.  When the
 			last path part of 'viewdir' does not exist, this
@@ -1427,14 +1429,13 @@ triggered.
 
 The output of ":mkview" contains these items:
 1. The argument list used in the window.  When the global argument list is
-   used it is reset to the global list.
+   used, it is reset to the global list.
    The index in the argument list is also restored.
 2. The file being edited in the window.  If there is no file, the window is
    made empty.
-3. Restore mappings, abbreviations and options local to the window if
-   'viewoptions' contains "options" or "localoptions".  For the options it
-   restores only values that are local to the current buffer and values local
-   to the window.
+3. Restore mappings, abbreviations and options local to the window, if
+   'viewoptions' contains "options" or "localoptions".  Only option values
+   that are local to the current buffer and the current window are restored.
    When storing the view as part of a session and "options" is in
    'sessionoptions', global values for local options will be stored too.
 4. Restore folds when using manual folding and 'viewoptions' contains
@@ -1468,7 +1469,7 @@ Note that Views and Sessions are not perfect:
 The combination of ":mkview" and ":loadview" can be used to store up to ten
 different views of a file.  These are remembered in the directory specified
 with the 'viewdir' option.  The views are stored using the file name.  If a
-file is renamed or accessed through a (symbolic) link the view will not be
+file is renamed or accessed through a (symbolic) link, the view will not be
 found.
 
 You might want to clean up your 'viewdir' directory now and then.
@@ -1541,12 +1542,13 @@ always kept.  This is used for:
 - The search string history.
 - The input-line history.
 - Contents of non-empty registers.
-- The jump list
-- File marks
+- The jump list.
+- File marks.
+
 The timestamp feature was added before Vim 8.0.  Older versions of Vim,
 starting with 7.4.1131, will keep the items with timestamp, but not use them.
-Thus when using both an older and a newer version of Vim the most recent data
-will be kept.
+Thus, when using both an older and a newer version of Vim, the most recent
+data will be kept.
 
 Notes for Unix:
 - The file protection for the viminfo file will be set to prevent other users
@@ -1558,7 +1560,7 @@ Notes for Unix:
   allow just anybody to read and write your viminfo file!
 - Vim will not overwrite a viminfo file that is not writable by the current
   "real" user.  This helps for when you did "su" to become root, but your
-  $HOME is still set to a normal user's home directory.  Otherwise Vim would
+  $HOME is still set to a normal user's home directory.  Otherwise, Vim would
   create a viminfo file owned by root that nobody else can read.
 - The viminfo file cannot be a symbolic link.  This is to avoid security
   issues.
@@ -1590,11 +1592,11 @@ using this command: >
 
 	vim -c "normal '0"
 
-In a csh compatible shell you could make an alias for it: >
+In a C shell descendant, you could make an alias for it: >
 
 	alias lvim vim -c '"'normal "'"0'"'
 
-For a bash-like shell: >
+For a Bash-like shell: >
 
 	alias lvim='vim -c "normal '\''0"'
 
@@ -1639,14 +1641,14 @@ MANUALLY READING AND WRITING				*viminfo-read-write*
 Two commands can be used to read and write the viminfo file manually.  This
 can be used to exchange registers between two running Vim programs: First
 type ":wv" in one and then ":rv" in the other.  Note that if the register
-already contained something, then ":rv!" would be required.  Also note
-however that this means everything will be overwritten with information from
+already contained something, then ":rv!" would be required.  Also note,
+however, that this means everything will be overwritten with information from
 the first Vim, including the command line history, etc.
 
 The viminfo file itself can be edited by hand too, although we suggest you
 start with an existing one to get the format right.  It is reasonably
 self-explanatory once you're in there.  This can be useful in order to
-create a second file, say "~/.my_viminfo" which could contain certain
+create a second file, say "~/.my_viminfo", which could contain certain
 settings that you always want when you first start Vim.  For example, you
 can preload registers with particular data, or put certain commands in the
 command line history.  A line in your .vimrc file like >
@@ -1670,7 +1672,7 @@ most of the information will be restored).
 			|viminfo-file-name| above).
 			If [!] is given, then any information that is
 			already set (registers, marks, |v:oldfiles|, etc.)
-			will be overwritten
+			will be overwritten.
 
 			*:wv* *:wviminfo* *E137* *E138* *E574* *E886* *E929*
 :wv[iminfo][!] [file]	Write to viminfo file [file] (default: see
@@ -1682,10 +1684,10 @@ most of the information will be restored).
 			the old information is not read first, only the
 			internal info is written.  If 'viminfo' is empty, marks
 			for up to 100 files will be written.
-			When you get error "E929: Too many viminfo temp files"
-			check that no old temp files were left behind (e.g.
-			~/.viminf*) and that you can write in the directory of
-			the .viminfo file.
+			When you get error "E929: Too many viminfo temp
+			files", check that no old temp files were left behind
+			(e.g. ~/.viminf*) and that you can write in the
+			directory of the .viminfo file.
 
 						*:ol* *:oldfiles*
 :ol[dfiles]		List the files that have marks stored in the viminfo
@@ -1703,7 +1705,7 @@ most of the information will be restored).
 			the list is edited.
 			If you get the |press-enter| prompt you can press "q"
 			and still get the prompt to enter a file number.
-			Use ! to abandon a modified buffer. |abandon|
+			Use [!] to abandon a modified buffer. |abandon|
 			{not when compiled with tiny features}
 
  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/syntax.txt

@@ -1,4 +1,4 @@
-*syntax.txt*	For Vim version 9.1.  Last change: 2024 Jan 03
+*syntax.txt*	For Vim version 9.1.  Last change: 2024 Mar 10
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -271,6 +271,10 @@ you can see the actual color, except for "Ignore"):
 	*Todo		anything that needs extra attention; mostly the
 			keywords TODO FIXME and XXX
 
+	*Added		added line in a diff
+	*Changed	changed line in a diff
+	*Removed	removed line in a diff
+
 The names marked with * are the preferred groups; the others are minor groups.
 For the preferred groups, the "syntax.vim" file contains default highlighting.
 The minor groups are linked to the preferred groups, so they get the same
@@ -1022,6 +1026,8 @@ Variable		Highlight ~
 *c_no_c99*		don't highlight C99 standard items
 *c_no_c11*		don't highlight C11 standard items
 *c_no_bsd*		don't highlight BSD specific types
+*c_functions*		highlight function calls and definitions
+*c_function_pointers*	highlight function pointers definitions
 
 When 'foldmethod' is set to "syntax" then /* */ comments and { } blocks will
 become a fold.  If you don't want comments to become a fold use: >
@@ -1261,7 +1267,7 @@ To highlight KDE-reserved features, set >
 g:desktop_enable_kde follows g:desktop_enable_nonstd if not supplied
 
 
-DIFF						*diff.vim* *ft-diff-syntax*
+DIFF							*diff.vim*
 
 The diff highlighting normally finds translated headers.  This can be slow if
 there are very long lines in the file.  To disable translations: >
@@ -1270,15 +1276,6 @@ there are very long lines in the file.  To disable translations: >
 
 Also see |diff-slow|.
 
-Since the Vim 9.1 release |version-9.1| the diff filetype links the diffAdded,
-diffRemoved and diffChanged highlighting groups to |hl-DiffAdd|,
-|hl-DiffDelete| and |hl-DiffChange| by default.  If you do not want this, you
-can change it to the previous groups like this in your |.vimrc| >
-
-	hi link diffRemoved Special
-	hi link diffChanged PreProc
-	hi link diffAdded Identifier
-<
 DIRCOLORS			       *dircolors.vim* *ft-dircolors-syntax*
 
 The dircolors utility highlighting definition has one option.  It exists to
@@ -1334,12 +1331,15 @@ Stack Overflow -
 
 https://stackoverflow.com/questions/12407800/which-comment-style-should-i-use-in-batch-files
 
-To allow the use of the :: idiom for comments in the Windows Command
-Interpreter or working with MS-DOS bat files, set the
-dosbatch_colons_comment variable to anything: >
+To allow the use of the :: idiom for comments in command blocks with the
+Windows Command Interpreter set the dosbatch_colons_comment variable to
+anything: >
 
    :let dosbatch_colons_comment = 1
 
+If this variable is set then a :: comment that is the last line in a command
+block will be highlighted as an error.
+
 There is an option that covers whether *.btm files should be detected as type
 "dosbatch" (MS-DOS batch files) or type "btm" (4DOS batch files).  The latter
 is used by default.  You may select the former with the following line: >
@@ -1597,13 +1597,11 @@ edit F# or Fortran at all, use this in your startup vimrc: >
 FORTRAN					*fortran.vim* *ft-fortran-syntax*
 
 Default highlighting and dialect ~
-Vim highlights according to Fortran 2023 (the most recent standard) by
-default.  This choice should be appropriate for most users most of the time
-because Fortran 2023 is almost a superset of previous versions (Fortran 2018,
-2008, 2003, 95, 90, and 77).  A small number of features new to Fortran 2018
-and Fortran 2023 may have been omitted at present; the transition to Fortran
-2023 will be completed in the near future. A few legacy constructs deleted or
-declared obsolescent in recent Fortran standards are highlighted as todo
+Vim highlights according to Fortran 2023 (the most recent standard). This
+choice should be appropriate for most users most of the time because Fortran
+2023 is almost a superset of previous versions (Fortran 2018, 2008, 2003, 95,
+90, 77, and 66).  A few legacy constructs deleted or declared obsolescent,
+respectively, in recent Fortran standards are highlighted as errors and todo
 items.
 
 The syntax script no longer supports Fortran dialects.  The variable
@@ -2238,10 +2236,19 @@ MARKDOWN						*ft-markdown-syntax*
 
 If you have long regions there might be wrong highlighting.  At the cost of
 slowing down displaying, you can have the engine look further back to sync on
-the start of a region, for example 500 lines: >
+the start of a region, for example 500 lines (default is 50): >
 
 	:let g:markdown_minlines = 500
 
+If you want to enable fenced code block syntax highlighting in your markdown
+documents you can enable like this: >
+
+	:let g:markdown_fenced_languages = ['html', 'python', 'bash=sh']
+
+To disable markdown syntax concealing add the following to your vimrc: >
+
+	:let g:markdown_syntax_conceal = 0
+
 
 MATHEMATICA		*mma.vim* *ft-mma-syntax* *ft-mathematica-syntax*
 
@@ -2251,6 +2258,56 @@ have the following in your .vimrc: >
 	let filetype_m = "mma"
 
 
+MODULA2					*modula2.vim* *ft-modula2-syntax*
+
+Vim will recognise comments with dialect tags to automatically select a given
+dialect.
+
+The syntax for a dialect tag comment is: >
+
+	taggedComment :=
+	  '(*!' dialectTag '*)'
+	  ;
+
+	dialectTag :=
+	  m2pim | m2iso | m2r10
+	  ;
+
+	reserved words
+	  m2pim = 'm2pim', m2iso = 'm2iso', m2r10 = 'm2r10'
+
+A dialect tag comment is recognised by Vim if it occurs within the first 200
+lines of the source file. Only the very first such comment is recognised, any
+additional dialect tag comments are ignored.
+
+Example: >
+
+	DEFINITION MODULE FooLib; (*!m2pim*)
+	...
+
+Variable g:modula2_default_dialect sets the default Modula-2 dialect when the
+dialect cannot be determined from the contents of the Modula-2 file: if
+defined and set to 'm2pim', the default dialect is PIM.
+
+Example: >
+
+	let g:modula2_default_dialect = 'm2pim'
+
+
+Highlighting is further configurable for each dialect via the following
+variables.
+
+Variable			Highlight ~
+*modula2_iso_allow_lowline*	allow low line in identifiers
+*modula2_iso_disallow_octals*	disallow octal integer literals
+*modula2_iso_disallow_synonyms*	disallow "@", "&" and "~" synonyms
+
+*modula2_pim_allow_lowline*	allow low line in identifiers
+*modula2_pim_disallow_octals*	disallow octal integer literals
+*modula2_pim_disallow_synonyms*	disallow "&" and "~" synonyms
+
+*modula2_r10_allow_lowline*	allow low line in identifiers
+
 MOO						*moo.vim* *ft-moo-syntax*
 
 If you use C-style comments inside expressions and find it mangles your
@@ -5220,7 +5277,8 @@ ctermul={color-nr}				*highlight-ctermul*
 	"cterm=" argument AFTER the "ctermfg=" or "ctermbg=" argument.	Or use
 	a number instead of a color name.
 
-	The case of the color names is ignored.
+	The case of the color names is ignored, however Vim will use lower
+	case color names when reading from the |v:colornames| dictionary.
 	Note that for 16 color ansi style terminals (including xterms), the
 	numbers in the NR-8 column is used.  Here '*' means 'add 8' so that
 	Blue is 12, DarkGray is 8 etc.
@@ -5259,6 +5317,14 @@ ctermul={color-nr}				*highlight-ctermul*
 	command is given.  If the Normal group colors are changed later, the
 	"fg" and "bg" colors will not be adjusted.
 
+ctermfont={font-nr}				*highlight-ctermfont*
+	This gives the alternative font number to use in the terminal. The
+	available fonts depend on the terminal, and if the terminal is not set
+	up for alternative fonts this simply won't do anything. The range of
+	{font-nr} is 0-10 where 0 resets the font to the default font, 1-9
+	selects one of the 9 alternate fonts, and 10 selects the Fraktur font.
+	For more information see your terminal's handling of SGR parameters
+	10-20. |t_CF|
 
 3. highlight arguments for the GUI
 
@@ -5331,8 +5397,8 @@ guisp={color-name}					*highlight-guisp*
 	    :highlight Comment guifg=#11f0c3 guibg=#ff00ff
 <
 	If you are authoring a color scheme and use the same hexadecimal value
-	repeatedly, you can define a name for it in |v:colornames|. For
-	example: >
+	repeatedly, you can define a (lower case) name for it in |v:colornames|.
+	For example: >
 
 	    # provide a default value for this color but allow the user to
 	    # override it.

runtime/doc/tags

@@ -1024,6 +1024,7 @@ $quote	eval.txt	/*$quote*
 't_AU'	term.txt	/*'t_AU'*
 't_BD'	term.txt	/*'t_BD'*
 't_BE'	term.txt	/*'t_BE'*
+'t_CF'	term.txt	/*'t_CF'*
 't_CS'	term.txt	/*'t_CS'*
 't_CV'	term.txt	/*'t_CV'*
 't_Ce'	term.txt	/*'t_Ce'*
@@ -1293,6 +1294,7 @@ $quote	eval.txt	/*$quote*
 'winaltkeys'	options.txt	/*'winaltkeys'*
 'wincolor'	options.txt	/*'wincolor'*
 'window'	options.txt	/*'window'*
+'winfixbuf'	options.txt	/*'winfixbuf'*
 'winfixheight'	options.txt	/*'winfixheight'*
 'winfixwidth'	options.txt	/*'winfixwidth'*
 'winheight'	options.txt	/*'winheight'*
@@ -2872,6 +2874,7 @@ $quote	eval.txt	/*$quote*
 :map-arguments	map.txt	/*:map-arguments*
 :map-buffer	map.txt	/*:map-buffer*
 :map-cmd	map.txt	/*:map-cmd*
+:map-cmd-key	map.txt	/*:map-cmd-key*
 :map-commands	map.txt	/*:map-commands*
 :map-expression	map.txt	/*:map-expression*
 :map-local	map.txt	/*:map-local*
@@ -2884,6 +2887,7 @@ $quote	eval.txt	/*$quote*
 :map-special	map.txt	/*:map-special*
 :map-special-chars	map.txt	/*:map-special-chars*
 :map-special-keys	map.txt	/*:map-special-keys*
+:map-super-keys	map.txt	/*:map-super-keys*
 :map-undo	map.txt	/*:map-undo*
 :map-unique	map.txt	/*:map-unique*
 :map-verbose	map.txt	/*:map-verbose*
@@ -4134,6 +4138,7 @@ E1056	vim9.txt	/*E1056*
 E1057	vim9.txt	/*E1057*
 E1058	vim9.txt	/*E1058*
 E1059	vim9.txt	/*E1059*
+E106	builtin.txt	/*E106*
 E1060	vim9.txt	/*E1060*
 E1061	vim9.txt	/*E1061*
 E1062	eval.txt	/*E1062*
@@ -4513,6 +4518,8 @@ E1409	vim9class.txt	/*E1409*
 E141	message.txt	/*E141*
 E1410	vim9class.txt	/*E1410*
 E1411	vim9class.txt	/*E1411*
+E1412	vim9class.txt	/*E1412*
+E1413	vim9class.txt	/*E1413*
 E142	message.txt	/*E142*
 E143	autocmd.txt	/*E143*
 E144	various.txt	/*E144*
@@ -4535,6 +4542,9 @@ E1508	editing.txt	/*E1508*
 E1509	editing.txt	/*E1509*
 E151	helphelp.txt	/*E151*
 E1510	change.txt	/*E1510*
+E1511	options.txt	/*E1511*
+E1512	options.txt	/*E1512*
+E1513	message.txt	/*E1513*
 E152	helphelp.txt	/*E152*
 E153	helphelp.txt	/*E153*
 E154	helphelp.txt	/*E154*
@@ -5706,6 +5716,7 @@ TabNew	autocmd.txt	/*TabNew*
 Tcl	if_tcl.txt	/*Tcl*
 TermChanged	autocmd.txt	/*TermChanged*
 TermResponse	autocmd.txt	/*TermResponse*
+TermResponseAll	autocmd.txt	/*TermResponseAll*
 TermdebugStartPost	terminal.txt	/*TermdebugStartPost*
 TermdebugStartPre	terminal.txt	/*TermdebugStartPre*
 TermdebugStopPost	terminal.txt	/*TermdebugStopPost*
@@ -5779,6 +5790,7 @@ WinClosed	autocmd.txt	/*WinClosed*
 WinEnter	autocmd.txt	/*WinEnter*
 WinLeave	autocmd.txt	/*WinLeave*
 WinNew	autocmd.txt	/*WinNew*
+WinNewPre	autocmd.txt	/*WinNewPre*
 WinResized	autocmd.txt	/*WinResized*
 WinResized-event	windows.txt	/*WinResized-event*
 WinScrolled	autocmd.txt	/*WinScrolled*
@@ -5964,6 +5976,7 @@ added-7.4	version7.txt	/*added-7.4*
 added-8.1	version8.txt	/*added-8.1*
 added-8.2	version8.txt	/*added-8.2*
 added-9.1	version9.txt	/*added-9.1*
+added-9.2	version9.txt	/*added-9.2*
 added-BeOS	version5.txt	/*added-BeOS*
 added-Mac	version5.txt	/*added-Mac*
 added-VMS	version5.txt	/*added-VMS*
@@ -6116,6 +6129,7 @@ binary-number	eval.txt	/*binary-number*
 bitwise-function	usr_41.txt	/*bitwise-function*
 bitwise-shift	eval.txt	/*bitwise-shift*
 blob	eval.txt	/*blob*
+blob-concatenation	eval.txt	/*blob-concatenation*
 blob-functions	usr_41.txt	/*blob-functions*
 blob-identity	eval.txt	/*blob-identity*
 blob-index	eval.txt	/*blob-index*
@@ -6164,12 +6178,14 @@ bug-fixes-7	version7.txt	/*bug-fixes-7*
 bug-fixes-8	version8.txt	/*bug-fixes-8*
 bug-fixes-9	version9.txt	/*bug-fixes-9*
 bug-fixes-9.1	version9.txt	/*bug-fixes-9.1*
+bug-fixes-9.2	version9.txt	/*bug-fixes-9.2*
 bug-reports	intro.txt	/*bug-reports*
 bugreport.vim	intro.txt	/*bugreport.vim*
 bugs	intro.txt	/*bugs*
 builtin-function-details	builtin.txt	/*builtin-function-details*
 builtin-function-list	builtin.txt	/*builtin-function-list*
 builtin-functions	builtin.txt	/*builtin-functions*
+builtin-object-methods	vim9class.txt	/*builtin-object-methods*
 builtin-terms	term.txt	/*builtin-terms*
 builtin-tools	gui.txt	/*builtin-tools*
 builtin.txt	builtin.txt	/*builtin.txt*
@@ -6278,6 +6294,8 @@ c_ansi_typedefs	syntax.txt	/*c_ansi_typedefs*
 c_comment_strings	syntax.txt	/*c_comment_strings*
 c_curly_error	syntax.txt	/*c_curly_error*
 c_digraph	cmdline.txt	/*c_digraph*
+c_function_pointers	syntax.txt	/*c_function_pointers*
+c_functions	syntax.txt	/*c_functions*
 c_gnu	syntax.txt	/*c_gnu*
 c_no_ansi	syntax.txt	/*c_no_ansi*
 c_no_bracket_error	syntax.txt	/*c_no_bracket_error*
@@ -6346,6 +6364,7 @@ changed-7.4	version7.txt	/*changed-7.4*
 changed-8.1	version8.txt	/*changed-8.1*
 changed-8.2	version8.txt	/*changed-8.2*
 changed-9.1	version9.txt	/*changed-9.1*
+changed-9.2	version9.txt	/*changed-9.2*
 changelist	motion.txt	/*changelist*
 changelog.vim	syntax.txt	/*changelog.vim*
 changenr()	builtin.txt	/*changenr()*
@@ -6428,6 +6447,7 @@ cino-{	indent.txt	/*cino-{*
 cino-}	indent.txt	/*cino-}*
 cinoptions-values	indent.txt	/*cinoptions-values*
 class	vim9class.txt	/*class*
+class-compile	vim9class.txt	/*class-compile*
 class-method	vim9class.txt	/*class-method*
 clear-undo	undo.txt	/*clear-undo*
 clearmatches()	builtin.txt	/*clearmatches()*
@@ -6483,6 +6503,7 @@ compile-changes-6	version6.txt	/*compile-changes-6*
 compile-changes-7	version7.txt	/*compile-changes-7*
 compile-changes-8	version8.txt	/*compile-changes-8*
 compile-changes-9	version9.txt	/*compile-changes-9*
+compile-changes-9.2	version9.txt	/*compile-changes-9.2*
 compiler-compaqada	ft_ada.txt	/*compiler-compaqada*
 compiler-decada	ft_ada.txt	/*compiler-decada*
 compiler-dotnet	quickfix.txt	/*compiler-dotnet*
@@ -6749,7 +6770,9 @@ dict-identity	eval.txt	/*dict-identity*
 dict-modification	eval.txt	/*dict-modification*
 did_filetype()	builtin.txt	/*did_filetype()*
 diff	diff.txt	/*diff*
+diff()	builtin.txt	/*diff()*
 diff-diffexpr	diff.txt	/*diff-diffexpr*
+diff-func-examples	diff.txt	/*diff-func-examples*
 diff-mode	diff.txt	/*diff-mode*
 diff-options	diff.txt	/*diff-options*
 diff-original-file	diff.txt	/*diff-original-file*
@@ -7147,6 +7170,7 @@ foldtextresult()	builtin.txt	/*foldtextresult()*
 font-sizes	gui_x11.txt	/*font-sizes*
 fontset	mbyte.txt	/*fontset*
 forced-motion	motion.txt	/*forced-motion*
+foreach()	builtin.txt	/*foreach()*
 foreground()	builtin.txt	/*foreground()*
 fork	os_unix.txt	/*fork*
 form.vim	syntax.txt	/*form.vim*
@@ -7176,6 +7200,7 @@ ft-ada-syntax	ft_ada.txt	/*ft-ada-syntax*
 ft-ada-variables	ft_ada.txt	/*ft-ada-variables*
 ft-ant-syntax	syntax.txt	/*ft-ant-syntax*
 ft-apache-syntax	syntax.txt	/*ft-apache-syntax*
+ft-asciidoc-plugin	filetype.txt	/*ft-asciidoc-plugin*
 ft-asm-syntax	syntax.txt	/*ft-asm-syntax*
 ft-asm68k-syntax	syntax.txt	/*ft-asm68k-syntax*
 ft-asmh8300-syntax	syntax.txt	/*ft-asmh8300-syntax*
@@ -7207,7 +7232,6 @@ ft-cynlib-syntax	syntax.txt	/*ft-cynlib-syntax*
 ft-dart-syntax	syntax.txt	/*ft-dart-syntax*
 ft-dash-syntax	syntax.txt	/*ft-dash-syntax*
 ft-desktop-syntax	syntax.txt	/*ft-desktop-syntax*
-ft-diff-syntax	syntax.txt	/*ft-diff-syntax*
 ft-dircolors-syntax	syntax.txt	/*ft-dircolors-syntax*
 ft-docbk-syntax	syntax.txt	/*ft-docbk-syntax*
 ft-docbksgml-syntax	syntax.txt	/*ft-docbksgml-syntax*
@@ -7270,6 +7294,7 @@ ft-metapost-intro	ft_mp.txt	/*ft-metapost-intro*
 ft-metapost-mappings	ft_mp.txt	/*ft-metapost-mappings*
 ft-metapost-settings	ft_mp.txt	/*ft-metapost-settings*
 ft-mma-syntax	syntax.txt	/*ft-mma-syntax*
+ft-modula2-syntax	syntax.txt	/*ft-modula2-syntax*
 ft-moo-syntax	syntax.txt	/*ft-moo-syntax*
 ft-msql-syntax	syntax.txt	/*ft-msql-syntax*
 ft-n1ql-syntax	syntax.txt	/*ft-n1ql-syntax*
@@ -7344,6 +7369,7 @@ ft-xhtml-omni	insert.txt	/*ft-xhtml-omni*
 ft-xml-omni	insert.txt	/*ft-xml-omni*
 ft-xml-syntax	syntax.txt	/*ft-xml-syntax*
 ft-xpm-syntax	syntax.txt	/*ft-xpm-syntax*
+ft-yaml-indent	indent.txt	/*ft-yaml-indent*
 ft-yaml-syntax	syntax.txt	/*ft-yaml-syntax*
 ft-zimbu-plugin	filetype.txt	/*ft-zimbu-plugin*
 ft-zsh-syntax	syntax.txt	/*ft-zsh-syntax*
@@ -7535,7 +7561,6 @@ g:netrw_localmkdir	pi_netrw.txt	/*g:netrw_localmkdir*
 g:netrw_localmkdiropt	pi_netrw.txt	/*g:netrw_localmkdiropt*
 g:netrw_localmovecmd	pi_netrw.txt	/*g:netrw_localmovecmd*
 g:netrw_localmovecmdopt	pi_netrw.txt	/*g:netrw_localmovecmdopt*
-g:netrw_localrmdir	pi_netrw.txt	/*g:netrw_localrmdir*
 g:netrw_maxfilenamelen	pi_netrw.txt	/*g:netrw_maxfilenamelen*
 g:netrw_menu	pi_netrw.txt	/*g:netrw_menu*
 g:netrw_mkdir_cmd	pi_netrw.txt	/*g:netrw_mkdir_cmd*
@@ -7741,6 +7766,8 @@ getqflist()	builtin.txt	/*getqflist()*
 getqflist-examples	quickfix.txt	/*getqflist-examples*
 getreg()	builtin.txt	/*getreg()*
 getreginfo()	builtin.txt	/*getreginfo()*
+getregion()	builtin.txt	/*getregion()*
+getregion-notes	builtin.txt	/*getregion-notes*
 getregtype()	builtin.txt	/*getregtype()*
 getscript	pi_getscript.txt	/*getscript*
 getscript-autoinstall	pi_getscript.txt	/*getscript-autoinstall*
@@ -7859,6 +7886,7 @@ gui-w32-start	gui_w32.txt	/*gui-w32-start*
 gui-w32-various	gui_w32.txt	/*gui-w32-various*
 gui-w32-windowid	gui_w32.txt	/*gui-w32-windowid*
 gui-w32s	os_win32.txt	/*gui-w32s*
+gui-wayland	gui_x11.txt	/*gui-wayland*
 gui-win32-maximized	gui_w32.txt	/*gui-win32-maximized*
 gui-x11	gui_x11.txt	/*gui-x11*
 gui-x11-athena	gui_x11.txt	/*gui-x11-athena*
@@ -7945,6 +7973,7 @@ highlight-clear	syntax.txt	/*highlight-clear*
 highlight-cterm	syntax.txt	/*highlight-cterm*
 highlight-ctermbg	syntax.txt	/*highlight-ctermbg*
 highlight-ctermfg	syntax.txt	/*highlight-ctermfg*
+highlight-ctermfont	syntax.txt	/*highlight-ctermfont*
 highlight-ctermul	syntax.txt	/*highlight-ctermul*
 highlight-default	syntax.txt	/*highlight-default*
 highlight-font	syntax.txt	/*highlight-font*
@@ -8228,6 +8257,7 @@ improvements-6	version6.txt	/*improvements-6*
 improvements-7	version7.txt	/*improvements-7*
 improvements-8	version8.txt	/*improvements-8*
 improvements-9	version9.txt	/*improvements-9*
+improvements-9.2	version9.txt	/*improvements-9.2*
 in_bot	channel.txt	/*in_bot*
 in_buf	channel.txt	/*in_buf*
 in_io-buffer	channel.txt	/*in_io-buffer*
@@ -8244,6 +8274,7 @@ incompatible-6	version6.txt	/*incompatible-6*
 incompatible-7	version7.txt	/*incompatible-7*
 incompatible-8	version8.txt	/*incompatible-8*
 incompatible-9	version9.txt	/*incompatible-9*
+incompatible-9.2	version9.txt	/*incompatible-9.2*
 indent()	builtin.txt	/*indent()*
 indent-expression	indent.txt	/*indent-expression*
 indent.txt	indent.txt	/*indent.txt*
@@ -8591,6 +8622,7 @@ masm.vim	syntax.txt	/*masm.vim*
 match()	builtin.txt	/*match()*
 match-highlight	pattern.txt	/*match-highlight*
 match-parens	tips.txt	/*match-parens*
+match-pattern	builtin.txt	/*match-pattern*
 matchadd()	builtin.txt	/*matchadd()*
 matchaddpos()	builtin.txt	/*matchaddpos()*
 matcharg()	builtin.txt	/*matcharg()*
@@ -8659,6 +8691,14 @@ modeline	options.txt	/*modeline*
 modeline-local	options.txt	/*modeline-local*
 modeline-version	options.txt	/*modeline-version*
 modifyOtherKeys	map.txt	/*modifyOtherKeys*
+modula2.vim	syntax.txt	/*modula2.vim*
+modula2_iso_allow_lowline	syntax.txt	/*modula2_iso_allow_lowline*
+modula2_iso_disallow_octals	syntax.txt	/*modula2_iso_disallow_octals*
+modula2_iso_disallow_synonyms	syntax.txt	/*modula2_iso_disallow_synonyms*
+modula2_pim_allow_lowline	syntax.txt	/*modula2_pim_allow_lowline*
+modula2_pim_disallow_octals	syntax.txt	/*modula2_pim_disallow_octals*
+modula2_pim_disallow_synonyms	syntax.txt	/*modula2_pim_disallow_synonyms*
+modula2_r10_allow_lowline	syntax.txt	/*modula2_r10_allow_lowline*
 moo.vim	syntax.txt	/*moo.vim*
 more-compatible	version5.txt	/*more-compatible*
 more-prompt	message.txt	/*more-prompt*
@@ -9034,6 +9074,7 @@ new-options-5.2	version5.txt	/*new-options-5.2*
 new-options-5.4	version5.txt	/*new-options-5.4*
 new-other-8.2	version8.txt	/*new-other-8.2*
 new-other-9.1	version9.txt	/*new-other-9.1*
+new-other-9.2	version9.txt	/*new-other-9.2*
 new-perl-python	version5.txt	/*new-perl-python*
 new-persistent-undo	version7.txt	/*new-persistent-undo*
 new-plugins	version6.txt	/*new-plugins*
@@ -9116,9 +9157,12 @@ o_object-select	motion.txt	/*o_object-select*
 o_v	motion.txt	/*o_v*
 object	vim9class.txt	/*object*
 object-const-variable	vim9class.txt	/*object-const-variable*
+object-empty()	vim9class.txt	/*object-empty()*
 object-final-variable	vim9class.txt	/*object-final-variable*
+object-len()	vim9class.txt	/*object-len()*
 object-motions	motion.txt	/*object-motions*
 object-select	motion.txt	/*object-select*
+object-string()	vim9class.txt	/*object-string()*
 objects	index.txt	/*objects*
 obtaining-exted	netbeans.txt	/*obtaining-exted*
 ocaml.vim	syntax.txt	/*ocaml.vim*
@@ -9203,8 +9247,10 @@ patches-8.1	version8.txt	/*patches-8.1*
 patches-8.2	version8.txt	/*patches-8.2*
 patches-9	version9.txt	/*patches-9*
 patches-9.1	version9.txt	/*patches-9.1*
+patches-9.2	version9.txt	/*patches-9.2*
 patches-after-8.2	version9.txt	/*patches-after-8.2*
 patches-after-9.0	version9.txt	/*patches-after-9.0*
+patches-after-9.1	version9.txt	/*patches-after-9.1*
 pathshorten()	builtin.txt	/*pathshorten()*
 pattern	pattern.txt	/*pattern*
 pattern-atoms	pattern.txt	/*pattern-atoms*
@@ -10137,6 +10183,7 @@ t_AL	term.txt	/*t_AL*
 t_AU	term.txt	/*t_AU*
 t_BD	term.txt	/*t_BD*
 t_BE	term.txt	/*t_BE*
+t_CF	term.txt	/*t_CF*
 t_CS	term.txt	/*t_CS*
 t_CTRL-W_.	terminal.txt	/*t_CTRL-W_.*
 t_CTRL-W_:	terminal.txt	/*t_CTRL-W_:*
@@ -10495,6 +10542,7 @@ termdebug_winbar	terminal.txt	/*termdebug_winbar*
 terminal	terminal.txt	/*terminal*
 terminal-api	terminal.txt	/*terminal-api*
 terminal-autoshelldir	terminal.txt	/*terminal-autoshelldir*
+terminal-bufname	terminal.txt	/*terminal-bufname*
 terminal-client-server	terminal.txt	/*terminal-client-server*
 terminal-close	terminal.txt	/*terminal-close*
 terminal-colors	os_unix.txt	/*terminal-colors*
@@ -10991,6 +11039,7 @@ version-8.1	version8.txt	/*version-8.1*
 version-8.2	version8.txt	/*version-8.2*
 version-9.0	version9.txt	/*version-9.0*
 version-9.1	version9.txt	/*version-9.1*
+version-9.2	version9.txt	/*version-9.2*
 version-variable	eval.txt	/*version-variable*
 version4.txt	version4.txt	/*version4.txt*
 version5.txt	version5.txt	/*version5.txt*
@@ -11007,6 +11056,7 @@ version8.2	version8.txt	/*version8.2*
 version8.txt	version8.txt	/*version8.txt*
 version9.0	version9.txt	/*version9.0*
 version9.1	version9.txt	/*version9.1*
+version9.2	version9.txt	/*version9.2*
 version9.txt	version9.txt	/*version9.txt*
 versionlong-variable	eval.txt	/*versionlong-variable*
 vi	intro.txt	/*vi*
@@ -11026,6 +11076,7 @@ vim-8.2	version8.txt	/*vim-8.2*
 vim-9	version9.txt	/*vim-9*
 vim-9.0	version9.txt	/*vim-9.0*
 vim-9.1	version9.txt	/*vim-9.1*
+vim-9.2	version9.txt	/*vim-9.2*
 vim-additions	vi_diff.txt	/*vim-additions*
 vim-announce	intro.txt	/*vim-announce*
 vim-arguments	starting.txt	/*vim-arguments*
@@ -11172,6 +11223,7 @@ vt100-cursor-keys	term.txt	/*vt100-cursor-keys*
 vt100-function-keys	term.txt	/*vt100-function-keys*
 w	motion.txt	/*w*
 w32-clientserver	remote.txt	/*w32-clientserver*
+w32-experimental-keycode-trans-strategy	gui_w32.txt	/*w32-experimental-keycode-trans-strategy*
 w32-xpm-support	gui_w32.txt	/*w32-xpm-support*
 w:	eval.txt	/*w:*
 w:current_syntax	syntax.txt	/*w:current_syntax*

runtime/doc/tagsrch.txt

@@ -1,4 +1,4 @@
-*tagsrch.txt*   For Vim version 9.1.  Last change: 2023 Feb 13
+*tagsrch.txt*   For Vim version 9.1.  Last change: 2024 Mar 16
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -407,19 +407,24 @@ the pattern.
 							*tag-!*
 If the tag is in the current file this will always work.  Otherwise the
 performed actions depend on whether the current file was changed, whether a !
-is added to the command and on the 'autowrite' option:
+is added to the command and on the 'autowrite' and 'winfixbuf' options:
 
-  tag in       file	   autowrite			~
-current file  changed	!   option	  action	~
------------------------------------------------------------------------------
-    yes		 x	x     x	  goto tag
-    no		 no	x     x	  read other file, goto tag
-    no		yes    yes    x   abandon current file, read other file, goto
-				  tag
-    no		yes	no    on  write current file, read other file, goto
-				  tag
-    no		yes	no   off  fail
------------------------------------------------------------------------------
+  tag in       file	    winfixbuf	autowrite		~
+current file  changed	!   option	option	      action	~
+ -----------------------------------------------------------------------------
+    yes		x	x      off	  x	    goto tag
+    no		no	x      off	  x	    read other file, goto tag
+    no		yes	yes    off	  x	    abandon current file,
+						    read other file, goto tag
+    no		yes	no     off	  on	    write current file,
+						    read other file, goto tag
+    no		yes	no     off	  off	    fail
+    yes		x	yes    x	  x	    goto tag
+    no		no	no     on	  x	    fail
+    no		yes	no     on	  x	    fail
+    no		yes	no     on	  on	    fail
+    no		yes	no     on	  off	    fail
+ -----------------------------------------------------------------------------
 
 - If the tag is in the current file, the command will always work.
 - If the tag is in another file and the current file was not changed, the
@@ -435,6 +440,8 @@ current file  changed	!   option	  action	~
   the changes, use the ":w" command and then use ":tag" without an argument.
   This works because the tag is put on the stack anyway.  If you want to lose
   the changes you can use the ":tag!" command.
+- If the tag is in another file and the window includes 'winfixbuf', the
+  command will fail. If the tag is in the same file then it may succeed.
 
 							*tag-security*
 Note that Vim forbids some commands, for security reasons.  This works like

runtime/doc/term.txt

@@ -1,4 +1,4 @@
-*term.txt*      For Vim version 9.1.  Last change: 2023 Dec 09
+*term.txt*      For Vim version 9.1.  Last change: 2024 Feb 28
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -345,7 +345,7 @@ versions (and will then also end up in terminfo/termcap).
 
 						*xterm-kitty* *kitty-terminal*
 The Kitty terminal is a special case.  Mainly because it works differently
-from most other terminals, but also because, instead of trying the fit in and
+from most other terminals, but also because, instead of trying to fit in and
 make it behave like other terminals by default, it dictates how applications
 need to work when using Kitty.  This makes it very difficult for Vim to work
 in a Kitty terminal.  Some exceptions have been hard coded, but it is not at
@@ -448,6 +448,7 @@ Added by Vim (there are no standard codes for these):
 	t_AU	set underline color (ANSI)			*t_AU* *'t_AU'*
 	t_Ce	undercurl and underline end			*t_Ce* *'t_Ce'*
 	t_Cs	undercurl (curly underline) mode		*t_Cs* *'t_Cs'*
+	t_CF	set alternate font (using index 0 - 10)		*t_CF* *'t_CF'*
 	t_Us	double underline mode				*t_Us* *'t_Us'*
 	t_ds	dotted underline mode				*t_ds* *'t_ds'*
 	t_Ds	dashed underline mode				*t_Ds* *'t_Ds'*

runtime/doc/terminal.txt

@@ -1,4 +1,4 @@
-*terminal.txt*	For Vim version 9.1.  Last change: 2023 Nov 08
+*terminal.txt*	For Vim version 9.1.  Last change: 2024 Mar 17
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -208,6 +208,7 @@ Command syntax ~
 			[command].  Use `:execute` if you must have a Vim
 			command following in the same line.
 
+							*terminal-bufname*
 			A new buffer will be created, using [command] or
 			'shell' as the name, prefixed with a "!".  If a buffer
 			by this name already exists a number is added in
@@ -302,6 +303,12 @@ current window into a terminal window.  If there are unsaved changes this
 fails, use ! to force, as usual.
 
 							*terminal-close*
+When the terminal job finishes and no [command] was given (e.g. the 'shell'
+command was executed), the terminal window will be closed by default (unless
+the buffer in next window receiving the space has the 'nobuflisted' option set,
+in which case the terminal window would not be closed automatically, but a new
+empty buffer would be opened in that window).
+
 When the terminal window is closed, e.g. when the shell exits and "++close"
 argument was used, and this is the last normal Vim window, then Vim will exit.
 This is like using |:quit| in a normal window. Help and preview windows are
@@ -1024,17 +1031,17 @@ This can be used to pass the current directory from a shell to Vim.
 Put this in your .vimrc: >
 	def g:Tapi_lcd(_, path: string)
 	    if isdirectory(path)
-                execute 'silent lcd ' .. fnameescape(path)
-            endif
+		execute 'silent lcd ' .. fnameescape(path)
+	    endif
 	enddef
 <
 And, in a bash init file: >
-        if [[ -n "$VIM_TERMINAL" ]]; then
-            PROMPT_COMMAND='_vim_sync_PWD'
-            function _vim_sync_PWD() {
-              printf '\033]51;["call", "Tapi_lcd", "%q"]\007' "$PWD"
-            }
-        fi
+	if [[ -n "$VIM_TERMINAL" ]]; then
+	    PROMPT_COMMAND='_vim_sync_PWD'
+	    function _vim_sync_PWD() {
+		printf '\033]51;["call", "Tapi_lcd", "%q"]\007' "$PWD"
+	    }
+	fi
 <
 Or, for zsh: >
 	if [[ -n "$VIM_TERMINAL" ]]; then
@@ -1402,8 +1409,8 @@ Other commands ~
  *:Asm*	     jump to the window with the disassembly, create it if there
 	     isn't one
  *:Var*	     jump to the window with the local and argument variables,
-             create it if there isn't one. This window updates whenever the
-             program is stopped
+	     create it if there isn't one. This window updates whenever the
+	     program is stopped
 
 Events ~
 							*termdebug-events*

runtime/doc/testing.txt

@@ -1,4 +1,4 @@
-*testing.txt*	For Vim version 9.1.  Last change: 2023 May 18
+*testing.txt*	For Vim version 9.1.  Last change: 2024 Feb 18
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -234,6 +234,8 @@ test_mswin_event({event}, {args})		*test_mswin_event()*
 		{event} is a String and the supported values are:
 		    "mouse"	mouse event.
 		    "key"	keyboard event.
+		    "set_keycode_trans_strategy"
+				Change the key translation method.
 
 		"mouse":
 		  Inject either a mouse button click, or a mouse move, event.
@@ -290,6 +292,15 @@ test_mswin_event({event}, {args})		*test_mswin_event()*
 				unprocessed key events.  All other {args}
 				items are optional when this is set and true.
 
+		"set_keycode_trans_strategy":
+		  |w32-experimental-keycode-trans-strategy|
+		  Switch the keycode translation method. The supported methods
+		  are:
+		    experimental:   The method used after Patch v8.2.4807
+				    using ToUnicode() Win API call.
+		    classic:	    The method used pre Patch v8.2.4807
+				    using the TranslateMessage() Win API call.
+
 		Returns TRUE if the event is successfully added or executed,
 		FALSE if there is a failure.
 

runtime/doc/todo.txt

@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 9.1.  Last change: 2023 Dec 14
+*todo.txt*      For Vim version 9.1.  Last change: 2024 Mar 03
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -130,11 +130,8 @@ Further Vim9 improvements:
     Issue #11822: any.Func() can be a dict or an object call, need to handle
     this at runtime.  Also see #12198 for an example.
     Possibly issue #11981 can be fixed at the same time (has two examples).
-  - Make ":defcompile ClassName" compile all functions and methods in the
-    class.
   - Forward declaration of a class?  E.g. for Clone() function.
 	Email lifepillar 2023 Mar 26
-  - object empty(), len() - can class define a method to be used for them?
   - When "Meta" is a class, is "const MetaAlias = Meta" allowed?  It should
     either work or given an error. Possibly give an error now and implement it
     later (using a typedef).  #12006
@@ -958,9 +955,6 @@ When 'sidescrolloff' is set, using "zl" to go to the end of the line, suddenly
 scrolls back.  Should allow for this scrolling, like 'scrolloff' does when
 using CTRL-E. (Yee Cheng Chin, #3721)
 
-Add function to make use of internal diff, working on two lists and returning
-unified diff (list of lines).
-
 When splitting a window with few text lines, the relative cursor position is
 kept, which means part of the text isn't displayed.  Better show all the text
 when possible. (Dylan Lloyd, #3973)
@@ -1123,9 +1117,6 @@ When t_Co is changed from termresponse, the OptionSet autocommand event isn't
 triggered.  Use the code from the end of set_num_option() in
 set_color_count().
 
-Add another autocommand like TermResponse that is fired for the other terminal
-responses, such as bg and fg.  Use "bg", "fg", "blink", etc. for the name.
-
 When using command line window, CmdlineLeave is triggered without
 CmdlineEnter.  (xtal8, 2017 Oct 30, #2263)
 Add some way to get the nested state.  Although CmdwinEnter is obviously
@@ -4672,7 +4663,6 @@ GUI:
 
 
 Autocommands:
-9   Add WinNewPre - before creating a new window. #10635
 9   When triggering WinNew provide the window ID somehow.  #10633
 9   Rework the code from FEAT_OSFILETYPE for autocmd-osfiletypes to use
     'filetype'.  Only for when the current buffer is known.

runtime/doc/usr_41.txt

@@ -1,4 +1,4 @@
-*usr_41.txt*	For Vim version 9.1.  Last change: 2023 May 06
+*usr_41.txt*	For Vim version 9.1.  Last change: 2024 Feb 25
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -69,7 +69,7 @@ The output of the example code is:
 
 In the first line the `vim9script` command makes clear this is a new, |Vim9|
 script file.  That matters for how the rest of the file is used.  It is
-recommended to put it in the very fist line, before any comments.
+recommended to put it in the very first line, before any comments.
 							*vim9-declarations*
 The `var i = 1` command declares the "i" variable and initializes it.  The
 generic form is: >
@@ -798,6 +798,7 @@ List manipulation:					*list-functions*
 	filter()		remove selected items from a List
 	map()			change each List item
 	mapnew()		make a new List with changed items
+	foreach()		apply function to List items
 	reduce()		reduce a List to a value
 	slice()			take a slice of a List
 	sort()			sort a List
@@ -829,6 +830,7 @@ Dictionary manipulation:				*dict-functions*
 	filter()		remove selected entries from a Dictionary
 	map()			change each Dictionary entry
 	mapnew()		make a new Dictionary with changed items
+	foreach()		apply function to Dictionary items
 	keys()			get List of Dictionary keys
 	values()		get List of Dictionary values
 	items()			get List of Dictionary key-value pairs
@@ -927,6 +929,7 @@ Cursor and mark position:		*cursor-functions* *mark-functions*
 
 Working with text in the current buffer:		*text-functions*
 	getline()		get a line or list of lines from the buffer
+	getregion()		get a region of text from the buffer
 	setline()		replace a line in the buffer
 	append()		append line or list of lines in the buffer
 	indent()		indent of a specific line
@@ -1366,6 +1369,7 @@ Various:					*various-functions*
 	changenr()		return number of most recent change
 	cscope_connection()	check if a cscope connection exists
 	did_filetype()		check if a FileType autocommand was used
+	diff()			diff two Lists of strings
 	eventhandler()		check if invoked by an event handler
 	getpid()		get process ID of Vim
 	getscriptinfo()		get list of sourced vim scripts

runtime/doc/version9.txt

@@ -1,4 +1,4 @@
-*version9.txt*  For Vim version 9.1.  Last change: 2024 Jan 01
+*version9.txt*  For Vim version 9.1.  Last change: 2024 Mar 03
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -12957,7 +12957,7 @@ Files:      src/fileio.c
 Patch 8.2.2056
 Problem:    Configure fails when building with the
             "implicit-function-declaration" error enabled, specifically on Mac.
-Solution:   Declear the functions like in the source code. (suggestion by
+Solution:   Declare the functions like in the source code. (suggestion by
             Clemens Lang, closes #7380)
 Files:      src/configure.ac, src/auto/configure
 
@@ -18862,7 +18862,7 @@ Solution:   Do not handle text properties when deleting a line for splitting a
 Files:      src/structs.h, src/memline.c, src/testdir/test_textprop.vim
 
 Patch 8.2.3063
-Problem:    Crash when switching 'cryptmethod' to xchaha20 with an existing
+Problem:    Crash when switching 'cryptmethod' to xchacha20 with an existing
             undo file. (Martin Tournoij)
 Solution:   Disable reading undo file when decoding can't be done inplace.
             (issue #8467)
@@ -19819,7 +19819,7 @@ Solution:   Add missing changes.
 Files:      src/globals.h
 
 Patch 8.2.3218
-Problem:    When using xchaha20 crypt undo file is not removed.
+Problem:    When using xchacha20 crypt undo file is not removed.
 Solution:   Reset 'undofile' and delete the file. (Christian Brabandt,
             closes #8630, closes #8467)
 Files:      src/bufwrite.c, src/crypt.c, src/proto/undo.pro,
@@ -29043,7 +29043,7 @@ Files:      src/testdir/test_autocmd.vim
 
 Patch 8.2.4729
 Problem:    HEEx and Surface templates do not need a separate filetype.
-Solution:   Use Eelixir for the similar filetypes. (Aaron Tinio, closes #10124)
+Solution:   Use Elixir for the similar filetypes. (Aaron Tinio, closes #10124)
 Files:      runtime/filetype.vim, src/testdir/test_filetype.vim
 
 Patch 8.2.4730
@@ -31688,7 +31688,7 @@ Files:      runtime/makemenu.vim
 VERSION 9.1				*version-9.1* *version9.1* *vim-9.1*
 
 This section is about improvements made between version 9.0 and 9.1.
-The release 9.1 is dedicated to Vims Benevolent dictator for life
+The release 9.1 is dedicated to Vim's Benevolent dictator for life
 |Bram-Moolenaar|.
 
 This release has hundreds of bug fixes, there are a few new features and there
@@ -31774,7 +31774,7 @@ Other improvements				*new-other-9.1*
 - Support "**" for filename expansion with bash using globstar setting.
 - Add quadruple prime digraph using 4'.
 - Better high dpi support on Windows.
-- Varous fixes for unsafe memory access, memory leaks, buffer overflows
+- Various fixes for unsafe memory access, memory leaks, buffer overflows
   and potential crashes.
 - Termdebug: Support for the variables window (|termdebug_variables_window|),
   moving up/down the stack frames (|termdebug-frames|) and setting temporary
@@ -32098,7 +32098,7 @@ Problem:    Split else-of is confusing.
 Solution:   Join the lines. (closes #10696)
 
 Patch 9.0.0051
-Problem:    Using CTRL-C wih :append may hang Vim.
+Problem:    Using CTRL-C with :append may hang Vim.
 Solution:   Reset got_int. (closes #10729, closes #10728)
 
 Patch 9.0.0052
@@ -32487,7 +32487,7 @@ Solution:   pass the command modifier in sticky_cmdmod_flags. (Kota Kato,
             closes #10845)
 
 Patch 9.0.0141
-Problem:    "delmenu" does not remove autocmmands. Running menu test function
+Problem:    "delmenu" does not remove autocommands. Running menu test function
             alone fails.
 Solution:   Delete autocommands Make sure there is at least one menu.
             (closes #10848)
@@ -32663,7 +32663,7 @@ Solution:   Remove ch_logfile() calls.
 
 Patch 9.0.0181
 Problem:    Textprop test with line2byte() fails on MS-Windows.
-Solution:   Fix updating chuncks in ml_delete_int().
+Solution:   Fix updating chunks in ml_delete_int().
 
 Patch 9.0.0182
 Problem:    Quarto files are not recognized.
@@ -32901,7 +32901,7 @@ Problem:    Cannot make difference between the end of :normal and a character
 Solution:   Add the "typebuf_was_empty" flag. (closes #10950)
 
 Patch 9.0.0235
-Problem:    'autoshelldir' does not work with chunked respose.
+Problem:    'autoshelldir' does not work with chunked response.
 Solution:   Collect chunks before parsing OSC 7. (closes #10949)
 
 Patch 9.0.0236
@@ -32991,7 +32991,7 @@ Solution:   Add #ifdef.
 
 Patch 9.0.0256
 Problem:    Compiler warning for uninitialized variables.
-Solution:   Initilize the variables.
+Solution:   Initialize the variables.
 
 Patch 9.0.0257
 Problem:    "->" in ":scriptnames" output not tested yet.
@@ -33101,7 +33101,7 @@ Problem:    Build failure without the +eval feature.
 Solution:   Add #ifdef.
 
 Patch 9.0.0282
-Problem:    A nested timout stops the previous timeout.
+Problem:    A nested timeout stops the previous timeout.
 Solution:   Ignore any nested timeout.
 
 Patch 9.0.0283
@@ -33542,7 +33542,7 @@ Problem:    Coverity complains about unused value.
 Solution:   Use the value.
 
 Patch 9.0.0384
-Problem:    Covertity still complains about using return value of getc().
+Problem:    Coverity still complains about using return value of getc().
 Solution:   Check for EOF.
 
 Patch 9.0.0385
@@ -34271,7 +34271,7 @@ Problem:    Crash when using NUL in buffer that uses :source.
 Solution:   Don't get a next line when skipping over NL.
 
 Patch 9.0.0553
-Problem:    No error for "|" after "{" in lamda.
+Problem:    No error for "|" after "{" in lambda.
 Solution:   Check for invalid "|". (closes #11199)
 
 Patch 9.0.0554
@@ -34310,7 +34310,7 @@ Solution:   Set a timeout of 30 seconds.
 
 Patch 9.0.0562
 Problem:    HSL playlist files are not recognized.
-Solution:   Add a pattern to recognize HSL palylist files. (Benoît Ryder,
+Solution:   Add a pattern to recognize HSL playlist files. (Benoît Ryder,
             closes #11204)
 
 Patch 9.0.0563
@@ -34400,7 +34400,7 @@ Solution:   Also remove /private from the expected directory.
 
 Patch 9.0.0583
 Problem:    Only recognizing .m3u8 files is inconsistent.
-Solution:   Also matc .m3u files. (issue #11204)
+Solution:   Also match .m3u files. (issue #11204)
 
 Patch 9.0.0584
 Problem:    Cscope test with wrong executable name fails.
@@ -34678,7 +34678,7 @@ Solution:   Stop at line 1 when 'smoothscroll' is not set. (closes #11261)
 Patch 9.0.0646
 Problem:    with 'smoothscroll' set CTRL-E does not work properly when
             'foldmethod' is set to "indent". (Yee Cheng Chin)
-Solution:   Merge the code for scroling with folds and 'smoothscroll'.
+Solution:   Merge the code for scrolling with folds and 'smoothscroll'.
             (closes #11262)
 
 Patch 9.0.0647
@@ -34770,7 +34770,7 @@ Patch 9.0.0666
 Problem:    Spacing-combining characters handled as composing, causing text to
             take more space than expected.
 Solution:   Handle characters marked with "Mc" not as composing.
-            (closes #11282
+            (closes #11282)
 
 Patch 9.0.0667
 Problem:    ml_get error when 'splitkeep' is "screen". (Marius Gedminas)
@@ -34858,7 +34858,7 @@ Solution:   Use a pointer to the first char. (Yee Cheng Chin, closes #11302)
 
 Patch 9.0.0686
 Problem:    The right ALT key does not work on some MS-Windows keyboards.
-Solution:   Adjust the modifiers based on GetKeyState(). (Anoton Sharonov,
+Solution:   Adjust the modifiers based on GetKeyState(). (Anton Sharonov,
             closes #11300)
 
 Patch 9.0.0687
@@ -35139,7 +35139,7 @@ Solution:   Adjust expected result to slightly different behavior.  Correct
 
 Patch 9.0.0747
 Problem:    Too many #ifdefs.
-Solution:   Gradudate the +cmdline_info feature. (Martin Tournoij,
+Solution:   Graduate the +cmdline_info feature. (Martin Tournoij,
             closes #11330)
 
 Patch 9.0.0748
@@ -35305,7 +35305,7 @@ Solution:   Free the allocated memory when bailing out.
 
 Patch 9.0.0786
 Problem:    User command does not get number from :tab modifier.
-Solution:   Include the number. (closes #11393, closes #6801)
+Solution:   Include the number. (closes #11393, closes #6901)
 
 Patch 9.0.0787
 Problem:    MS-Windows: mouse scrolling in terminal misbehaves without dll.
@@ -35372,8 +35372,8 @@ Solution:   Remove one typedef.
 
 Patch 9.0.0801
 Problem:    The modifyOtherKeys flag is set when it should not.
-Solution:   Do not handle special key codes with a modifer value above 16 as a
-            modifyOtherKeys value. (issue #11403)
+Solution:   Do not handle special key codes with a modifier value above 16 as
+            a modifyOtherKeys value. (issue #11403)
 
 Patch 9.0.0802
 Problem:    MS-Windows: cannot map console mouse scroll events.
@@ -35385,7 +35385,7 @@ Problem:    readblob() cannot read from character device.
 Solution:   Use S_ISCHR() to not check the size. (Ken Takata, closes #11407)
 
 Patch 9.0.0804
-Problem:    Crash when trying to divice the largest negative number by -1.
+Problem:    Crash when trying to divide the largest negative number by -1.
 Solution:   Handle this case specifically.
 
 Patch 9.0.0805
@@ -35974,7 +35974,7 @@ Solution:   Improve code formatting.
 
 Patch 9.0.0935
 Problem:    When using dash it may not be recognize as filetype "sh".
-Solution:   Add checks for "dash". (Eisuke Kawashima,closes #11600)
+Solution:   Add checks for "dash". (Eisuke Kawashima, closes #11600)
 
 Patch 9.0.0936
 Problem:    Wrong type for "isunnamed" returned by getreginfo().
@@ -36465,7 +36465,7 @@ Solution:   When setting "curwin" also set "curbuf". (closes #11687)
 
 Patch 9.0.1045
 Problem:    In a class object members cannot be initialized.
-Solution:   Support initializing object members. Make "dissassemble" work on
+Solution:   Support initializing object members. Make "disassemble" work on
             an object method.
 
 Patch 9.0.1046
@@ -36668,7 +36668,7 @@ Problem:    Clang warns for unused variable.
 Solution:   Adjust #ifdef. (John Marriott)
 
 Patch 9.0.1089
-Problem:    unnessary assignment
+Problem:    unnecessary assignment
 Solution:   Remove the assignment. (Luuk van Baal, closes #1136)
 
 Patch 9.0.1090
@@ -36886,11 +36886,11 @@ Solution:   Only use the member when the type is a list. (closes #11774)
 
 Patch 9.0.1139
 Problem:    Cannot create a new object in a compiled function.
-Solution:   Compile the instructins to create a new object.
+Solution:   Compile the instructions to create a new object.
 
 Patch 9.0.1140
 Problem:    Cannot call an object method in a compiled function.
-Solution:   Compile the instructins to invoke an object method.
+Solution:   Compile the instructions to invoke an object method.
 
 Patch 9.0.1141
 Problem:    'cursorcolumn' and 'colorcolumn' wrong after concealing and
@@ -37031,7 +37031,7 @@ Solution:   Redraw the screen when the cell widths have changed. (Yasuhiro
 
 Patch 9.0.1172
 Problem:    When 'selection' is "exclusive" then "1v" is one char short.
-Solution:   Add one character when 'selection' is "exclusive. (closes #11791)
+Solution:   Add one character when 'selection' is "exclusive". (closes #11791)
 
 Patch 9.0.1173
 Problem:    Compiler warning for unused variable on non-Unix systems.
@@ -37264,7 +37264,7 @@ Problem:    Reading past the end of a line when formatting text.
 Solution:   Check for not going over the end of the line.
 
 Patch 9.0.1226
-Problem:    Spurious empty line when using text propertie and virtual text.
+Problem:    Spurious empty line when using text properties and virtual text.
 Solution:   Do not set "text_prop_follows" when the other text property is not
             virtual text. (closes #11846)
 
@@ -37504,7 +37504,7 @@ Problem:    Display shows lines scrolled down erroneously. (Yishai Lerner)
 Solution:   Do not change "wl_lnum" at index zero. (closes #11938)
 
 Patch 9.0.1280
-Problem:    Inssufficient testing for what 9.0.1265 fixes.
+Problem:    Insufficient testing for what 9.0.1265 fixes.
 Solution:   Add a couple of test cases. (issue #11885)
 
 Patch 9.0.1281
@@ -37533,7 +37533,7 @@ Problem:    Coverity warns for using a NULL pointer.
 Solution:   Bail out whan "varp" is NULL.
 
 Patch 9.0.1287
-Problem:    With the Kitty key protocl Esc with NumLock cannot be mapped.
+Problem:    With the Kitty key protocol Esc with NumLock cannot be mapped.
 Solution:   Also use K_ESC when there is a modifier. (closes #11811)
 
 Patch 9.0.1288
@@ -37706,7 +37706,7 @@ Solution:   Use the same code as used for "j"/"k" to go to the next/previous
 
 Patch 9.0.1325
 Problem:    'colorcolumn' highlight wrong with virtual text above.
-Solution:   Adjust column of 'colorcolumn' for text propertly. (closes #12004)
+Solution:   Adjust column of 'colorcolumn' for text property. (closes #12004)
 
 Patch 9.0.1326
 Problem:    Relative line number not updated with virtual text above.
@@ -37965,8 +37965,8 @@ Problem:    xxd: combination of little endian and cols fails. (Aapo
 Solution:   Round up the space taken by the hex output. (closes #12097)
 
 Patch 9.0.1384
-Problem:    Setting HOMEBREW_NO_AUTO_UPDATE is not needed with Homebew version
-            4.
+Problem:    Setting HOMEBREW_NO_AUTO_UPDATE is not needed with Homebrew
+            version 4.
 Solution:   Remove setting HOMEBREW_NO_AUTO_UPDATE. (closes #12008)
 
 Patch 9.0.1385
@@ -38413,7 +38413,7 @@ Solution:   Add entry for Xchacha, even though it is not used.
 
 Patch 9.0.1485
 Problem:    no functions for converting from/to UTF-16 index.
-Solution:   Add UTF-16 flag to existing funtions and add strutf16len() and
+Solution:   Add UTF-16 flag to existing functions and add strutf16len() and
             utf16idx(). (Yegappan Lakshmanan, closes #12216)
 
 Patch 9.0.1486
@@ -38427,7 +38427,7 @@ Solution:   Use "vscode-jsonrpc" instead of "vim-jsonrpc". (Yegappan
 
 Patch 9.0.1488
 Problem:    xchacha20v2 crypt header is platform dependent.
-Solution:   Avoid using "size_t". (Ozaki Kiichi, closses #12296)
+Solution:   Avoid using "size_t". (Ozaki Kiichi, closes #12296)
 
 Patch 9.0.1489
 Problem:    Crypt with libsodium is not tested on CI.
@@ -39720,7 +39720,7 @@ Solution:   Add a few more tests for operator pending mode and register
 Patch 9.0.1780
 Problem:    Vim9 type not defined during object creation
 Solution:   Define type during object creation and not during class
-            definition, parse mulit-line member initializers, fix lock
+            definition, parse multi-line member initializers, fix lock
             initialization
 
 Patch 9.0.1781
@@ -39786,7 +39786,7 @@ Problem:    obsolete macros in configure script
 Solution:   Remove those and start moving to autoconf 2.71
 
 Patch 9.0.1794
-Problem:    autoconf: not correctly detecing include dirs
+Problem:    autoconf: not correctly detecting include dirs
 Solution:   make use of python3 to generate includedirs
 
 Patch 9.0.1795
@@ -40117,7 +40117,7 @@ Problem:    Coverity warns about uninitialized var
 Solution:   initialize it
 
 Patch 9.0.1870
-Problem:    Vim9: disassamble does not show static
+Problem:    Vim9: disassemble does not show static
 Solution:   Show static flag
 
 Patch 9.0.1871
@@ -40860,7 +40860,7 @@ Solution:   Fix cmdline completion fuzzy/Ctrl-E/Ctrl-Y/options when not
 Patch 9.0.2038
 Problem:    Vim9: object method funcref not cleaned up after use
 Solution:   Clean up type stack after using object method funcref,
-            remove now longer used ISN_DEFEROBJ instrunction
+            remove now longer used ISN_DEFEROBJ instruction
 
 Patch 9.0.2039
 Problem:    completion shows current word after completion restart
@@ -40883,7 +40883,7 @@ Problem:    Vim9: issue with funcref assignment and varargs
 Solution:   Fix funcref type checking
 
 Patch 9.0.2044
-Problem:    Vim9: exceptions confuse defered functions
+Problem:    Vim9: exceptions confuse deferred functions
 Solution:   save and restore exception state when calling deferred
             functions
 
@@ -41535,4 +41535,88 @@ Patch 9.0.2190
 Problem:    proto files need update
 Solution:   re-generate them
 
+==============================================================================
+VERSION 9.2				*version-9.2* *version9.2* *vim-9.2*
+
+This section is about improvements made between version 9.1 and 9.2
+and is a work in progress.
+
+Support for Wayland UI.
+
+Vim9 script
+-----------
+Add support for internal builtin functions with vim9 objects, see
+|builtin-object-methods|
+
+Other improvements				*new-other-9.2*
+------------------
+
+Changed						*changed-9.2*
+-------
+
+Added						*added-9.2*
+-----
+
+Various syntax, indent and other plugins were added.
+
+Functions: ~
+
+|diff()|		diff two Lists of strings
+|foreach()|		apply function to List items
+|matchbufline()|	all the matches of a pattern in a buffer
+|matchstrlist()|	all the matches of a pattern in a List of strings
+|getregion()|		get a region of text from a buffer
+
+
+Autocommands: ~
+
+|TermResponseAll|	after the terminal response to |t_RV| and others is
+			received
+|WinNewPre|		before creating a new window
+
+
+Commands: ~
+
+
+Options: ~
+
+'winfixbuf'		Keep buffer focused in a window
+
+==============================================================================
+INCOMPATIBLE CHANGES				*incompatible-9.2*
+
+Improved/Different MS-Windows mapping support
+|w32-experimental-keycode-trans-strategy|
+
+==============================================================================
+IMPROVEMENTS					*improvements-9.2*
+
+Support for command-line completion of 'keymap' option values.
+
+Support for compiling all the methods in a Vim9 class using |:defcompile|.
+
+Support for alternate font highlighting using |t_CF| terminal code.
+
+Support for Super key mappings in GTK using <D-Key>.
+
+Improved visual highlighting.
+
+Python3 support in OpenVMS.
+
+==============================================================================
+COMPILE TIME CHANGES				*compile-changes-9.2*
+
+Support for building with Ruby 3.3.
+
+Support for building Vim 9 in z/OS (MVS).
+
+==============================================================================
+PATCHES						*patches-9.2* *bug-fixes-9.2*
+						*patches-after-9.1*
+
+The list of patches that got included since 9.1.0.  This includes all the new
+features, but does not include runtime file changes (syntax, indent, ftplugin,
+documentation, etc.)
+
+
  vim:tw=78:ts=8:noet:ft=help:norl:fdm=manual:

runtime/doc/vim9.txt

@@ -1,4 +1,4 @@
-*vim9.txt*	For Vim version 9.1.  Last change: 2023 Dec 24
+*vim9.txt*	For Vim version 9.1.  Last change: 2024 Jan 12
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -1260,10 +1260,12 @@ Script-local variables in a |Vim9| script must be declared at the script
 level.  They cannot be created in a function, also not in a legacy function.
 
 						*:defc* *:defcompile*
-:defc[ompile]		Compile functions defined in the current script that
-			were not compiled yet.
-			This will report any errors found during compilation.
-			This excludes functions defined inside a class.
+:defc[ompile]		Compile functions and classes (|class-compile|)
+			defined in the current script that were not compiled
+			yet.  This will report any errors found during
+			compilation.
+
+:defc[ompile] MyClass	Compile all methods in a class. |class-compile|
 
 :defc[ompile] {func}
 :defc[ompile] debug {func}
@@ -1718,8 +1720,8 @@ an example for each category: >
 Vim does not have a familiar null value; it has various null_<type> predefined
 values, for example |null_string|, |null_list|, |null_job|. Primitives do not
 have a null_<type>. The typical use cases for null_<type> are:
-- to `clear a variable` and release its resources;
-- as a `default for a parameter` in a function definition, see |null-compare|.
+- to clear a variable and release its resources;
+- as a default for a parameter in a function definition, see |null-compare|.
 
 For a specialized variable, like `job`, null_<type> is used to clear the
 resources. For a container variable, resources can also be cleared by
@@ -1771,7 +1773,7 @@ an empty container, do not use null_<type> in a comparison: >
 	F(null_list)	# output: "null"
 	F([])		# output: "not null, empty"
 	F([''])		# output: "not null, not empty"
-The above function takes a `list of strings` and reports on it.
+The above function takes a list of strings and reports on it.
 Change the above function signature to accept different types of arguments: >
 	def F(arg: list<any> = null_list)   # any type of list
 	def F(arg: any = null)		    # any type
@@ -1789,18 +1791,18 @@ with vim9 null semantics, the programmer may chose to use null_<type> in
 comparisons and/or other situations.
 
 Elsewhere in the documentation it says:
-	Quite often a null value is handled the same as an
-	empty value, but not always
+	Quite often a null value is handled the same as an empty value, but
+	not always
 Here's an example: >
 	vim9script
 	var s1: list<string>
 	var s2: list<string> = null_list
 	echo s1		    # output: "[]"
 	echo s2		    # output: "[]"
-	
+
 	echo s1 + ['a']     # output: "['a']"
 	echo s2 + ['a']     # output: "['a']"
-	
+
 	echo s1->add('a')   # output: "['a']"
 	echo s2->add('a')   # E1130: Can not add to null list
 <
@@ -2022,7 +2024,7 @@ Note that this does not work for variables, only for functions.
 					    *import-legacy* *legacy-import*
 `:import` can also be used in legacy Vim script.  The imported namespace still
 becomes script-local, even when the "s:" prefix is not given. For example: >
-        import "myfile.vim"
+	import "myfile.vim"
 	call s:myfile.MyFunc()
 
 And using the "as name" form: >

runtime/doc/vim9class.txt

@@ -1,4 +1,4 @@
-*vim9class.txt*	For Vim version 9.1.  Last change: 2024 Jan 01
+*vim9class.txt*	For Vim version 9.1.  Last change: 2024 Mar 03
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -106,17 +106,17 @@ The object variables "lnum" and "col" can be accessed directly: >
 	echo $'The text position is ({pos.lnum}, {pos.col})'
 <						    *E1317* *E1327* *:this*
 If you have been using other object-oriented languages you will notice that in
-Vim, within a class definition, the object members are consistently referred
-to with the "this." prefix.  This is different from languages like Java and
-TypeScript.  The naming convention makes the object members easy to spot.
-Also, when a variable does not have the "this." prefix you know it is not an
-object variable.
+Vim, within a class definition, the declared object members are consistently
+referred to with the "this." prefix.  This is different from languages like
+Java and TypeScript.  The naming convention makes the object members easy to
+spot.  Also, when a variable does not have the "this." prefix you know it is
+not an object variable.
 								*E1411*
 From outside the class definition, access an object's methods and variables by
 using the object name followed by a dot following by the member: >
 
 	pos.lnum
-	pos.setCol(10)
+	pos.SetCol(10)
 <
 							*E1405* *E1406*
 A class name cannot be used as an expression.  A class name cannot be used in
@@ -164,7 +164,7 @@ from outside the class or its sub-classes, you can make them protected.  This
 is done by prefixing an underscore to the name: >
 
 	var _lnum: number
-	var _col number
+	var _col: number
 
 Now you need to provide methods to get the value of the protected variables.
 These are commonly called getters.  We recommend using a name that starts with
@@ -174,7 +174,7 @@ These are commonly called getters.  We recommend using a name that starts with
 	   return this._lnum
 	enddef
 
-	def GetCol() number
+	def GetCol(): number
 	   return this._col
 	enddef
 
@@ -330,7 +330,8 @@ variables but they have no access to the object variables, they cannot use the
 
 Inside the class the class method can be called by name directly, outside the
 class the class name must be prefixed: `OtherThing.ClearTotalSize()`.  To use
-a super class method in a child class, the class name must be prefixed.
+a class method from a parent class in a child class, the class name must be
+prefixed.
 
 Just like object methods the access can be made protected by using an
 underscore as the first character in the method name: >
@@ -492,17 +493,15 @@ prefix when defining the method: >
 
 	abstract class Shape
 	   abstract def Draw()
-	   abstract static def SetColor()
 	endclass
 <
 A static method in an abstract class cannot be an abstract method.
 
 						*E1373*
-A class extending the abstract class must implement all the abstract methods.
-The signature (arguments, argument types and return type) must be exactly the
-same.  If the return type of a method is a class, then that class or one of
-its subclasses can be used in the extended method.  Class methods in an
-abstract class can also be abstract methods.
+A non-abstract class extending the abstract class must implement all the
+abstract methods.  The signature (arguments, argument types and return type)
+must be exactly the same.  If the return type of a method is a class, then
+that class or one of its subclasses can be used in the extended method.
 
 ==============================================================================
 
@@ -610,7 +609,7 @@ once.  They can appear in any order, although this order is recommended: >
 <							*E1355* *E1369*
 Each variable and method name can be used only once.  It is not possible to
 define a method with the same name and different type of arguments.  It is not
-possible to use a public and protected member variable with the same name.  A
+possible to use a public and protected member variable with the same name.  An
 object variable name used in a super class cannot be reused in a child class.
 
 
@@ -688,7 +687,7 @@ Inside a class, in between `:class` and `:endclass`, these items can appear:
 - A class variable declaration: >
 	static var _protectedClassVariableName: memberType
 	static var readonlyClassVariableName: memberType
-	static var public readwriteClassVariableName: memberType
+	public static var readwriteClassVariableName: memberType
 - A constructor method: >
 	def new(arguments)
 	def newName(arguments)
@@ -711,6 +710,32 @@ The initialization isn't needed, the list is empty by default.
 							*E1330*
 Some types cannot be used, such as "void", "null" and "v:none".
 
+Builtin Object Methods ~
+                                                       *builtin-object-methods*
+Some of the builtin functions like |empty()|, |len()| and |string()| can be
+used with an object.  An object can implement a method with the same name as
+these builtin functions to return an object-specific value.
+
+                                                       *E1412*
+The following builtin methods are supported:
+                                                       *object-empty()*
+    empty()  Invoked by the |empty()| function to check whether an object is
+	     empty.  If this method is missing, then true is returned.  This
+	     method should not accept any arguments and must return a boolean.
+                                                       *object-len()*
+    len()    Invoked by the |len()| function to return the length of an
+	     object.  If this method is missing in the class, then an error is
+	     given and zero is returned.  This method should not accept any
+	     arguments and must return a number.
+                                                       *object-string()*
+    string() Invoked by the |string()| function to get a textual
+	     representation of an object.  Also used by the |:echo| command
+	     for an object.  If this method is missing in the class, then a
+	     built-in default textual representation is used.  This method
+	     should not accept any arguments and must return a string.
+
+                                                       *E1413*
+A class method cannot be used as a builtin method.
 
 Defining an interface ~
 					*Interface* *:interface* *:endinterface*
@@ -747,7 +772,7 @@ null object ~
 When a variable is declared to have the type of an object, but it is not
 initialized, the value is null.  When trying to use this null object Vim often
 does not know what class was supposed to be used.  Vim then cannot check if
-a variable name is correct and you will get an "Using a null object" error,
+a variable name is correct and you will get a "Using a null object" error,
 even when the variable name is invalid. *E1360* *E1362*
 
 
@@ -787,7 +812,7 @@ the name, you can define the constructor like this: >
 <
 When using the default new() method, if the order of the object variables in
 the class is changed later, then all the callers of the default new() method
-needs to change.  To avoid this, the new() method can be explicitly defined
+need to change.  To avoid this, the new() method can be explicitly defined
 without any arguments.
 
 							*E1328*
@@ -831,7 +856,14 @@ Note that the method name must start with "new".  If there is no method called
 "new()" then the default constructor is added, even though there are other
 constructor methods.
 
+Compiling methods in a Class ~
+							*class-compile*
+The |:defcompile| command can be used to compile all the class and object
+methods defined in a class: >
 
+	defcompile MyClass	# Compile class "MyClass"
+	defcompile		# Compile the classes in the current script
+<
 ==============================================================================
 
 7.  Type definition				*typealias* *Vim9-type* *:type*
@@ -993,7 +1025,7 @@ in the body, while for other variables this is not needed and often omitted.
 This leads to a mix of variables with and without "this.", which is
 inconsistent.
 
-For |Vim9| classes the "this." prefix is always used.  Also for declaring the
+For |Vim9| classes the "this." prefix is always used for declared methods and
 variables.  Simple and consistent.  When looking at the code inside a class
 it's also directly clear which variable references are object variables and
 which aren't.
@@ -1029,7 +1061,7 @@ Following that Vim object variables could be declared like this: >
 	endclass
 
 Some users pointed out that this looks more like an assignment than a
-declaration.  Adding "var" changes that: >
+declaration.  Adding "var" and omitting "this." changes that: >
 	class Point
 	  var x: number
 	  var y = 0

runtime/doc/windows.txt

@@ -1,4 +1,4 @@
-*windows.txt*   For Vim version 9.1.  Last change: 2022 Nov 27
+*windows.txt*   For Vim version 9.1.  Last change: 2024 Feb 20
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -519,35 +519,33 @@ horizontally split windows.  CTRL-W H does it the other way around.
 
 						*CTRL-W_K*
 CTRL-W K	Move the current window to be at the very top, using the full
-		width of the screen.  This works like closing the current
-		window and then creating another one with ":topleft split",
-		except that the current window contents is used for the new
-		window.
+		width of the screen.  This works like `:topleft split`, except
+		it is applied to the current window and no new window is
+		created.
 
 						*CTRL-W_J*
 CTRL-W J	Move the current window to be at the very bottom, using the
-		full width of the screen.  This works like closing the current
-		window and then creating another one with ":botright split",
-		except that the current window contents is used for the new
-		window.
+		full width of the screen.  This works like `:botright split`,
+		except it is applied to the current window and no new window
+		is created.
 
 						*CTRL-W_H*
 CTRL-W H	Move the current window to be at the far left, using the
-		full height of the screen.  This works like closing the
-		current window and then creating another one with
-		`:vert topleft split`, except that the current window contents
-		is used for the new window.
+		full height of the screen.  This works like
+		`:vert topleft split`, except it is applied to the current
+		window and no new window is created.
 
 						*CTRL-W_L*
 CTRL-W L	Move the current window to be at the far right, using the full
-		height of the screen.  This works like closing the
-		current window and then creating another one with
-		`:vert botright split`, except that the current window
-		contents is used for the new window.
+		height of the screen.  This works like `:vert botright split`,
+		except it is applied to the current window and no new window
+		is created.
 
 						*CTRL-W_T*
 CTRL-W T	Move the current window to a new tab page.  This fails if
 		there is only one window in the current tab page.
+		This works like `:tab split`, except the previous window is
+		closed.
 		When a count is specified the new tab page will be opened
 		before the tab page with this index.  Otherwise it comes after
 		the current tab page.

runtime/filetype.vim

@@ -317,6 +317,9 @@ au BufRead,BufNewFile *.chai			setf chaiscript
 " Chatito
 au BufNewFile,BufRead *.chatito			setf chatito
 
+" Chuck
+au BufNewFile,BufRead *.ck			setf chuck
+
 " Comshare Dimension Definition Language
 au BufNewFile,BufRead *.cdl			setf cdl
 
@@ -531,6 +534,9 @@ au BufNewFile,BufRead *.csp,*.fdr		setf csp
 au BufNewFile,BufRead *.pld			setf cupl
 au BufNewFile,BufRead *.si			setf cuplsim
 
+" Dafny
+au BufNewFile,BufRead *.dfy			setf dafny
+
 " Dart
 au BufRead,BufNewfile *.dart,*.drt		setf dart
 
@@ -619,8 +625,12 @@ au BufNewFile,BufRead *.intr			setf dylanintr
 " Dylan
 au BufNewFile,BufRead *.dylan			setf dylan
 
-" Microsoft Module Definition
-au BufNewFile,BufRead *.def			setf def
+" Microsoft Module Definition or Modula-2
+au BufNewFile,BufRead *.def			call dist#ft#FTdef()
+
+if has("fname_case")
+  au BufNewFile,BufRead *.DEF			setf modula2
+endif
 
 " Dracula
 au BufNewFile,BufRead *.drac,*.drc,*lvs,*lpe	setf dracula
@@ -639,8 +649,8 @@ au BufNewFile,BufRead *.dsl
 " DTD (Document Type Definition for XML)
 au BufNewFile,BufRead *.dtd			setf dtd
 
-" DTS/DSTI (device tree files)
-au BufNewFile,BufRead *.dts,*.dtsi		setf dts
+" DTS/DSTI/DTSO (device tree files)
+au BufNewFile,BufRead *.dts,*.dtsi,*.dtso,*.its	setf dts
 
 " EDIF (*.edf,*.edif,*.edn,*.edo) or edn
 au BufNewFile,BufRead *.ed\(f\|if\|o\)		setf edif
@@ -852,7 +862,7 @@ au BufNewFile,BufRead *.gts			setf typescript.glimmer
 au BufNewFile,BufRead *.gjs			setf javascript.glimmer
 
 " Gnuplot scripts
-au BufNewFile,BufRead *.gpi,.gnuplot		setf gnuplot
+au BufNewFile,BufRead *.gpi,*.gnuplot		setf gnuplot
 
 " Go (Google)
 au BufNewFile,BufRead *.go			setf go
@@ -1134,7 +1144,7 @@ au BufNewFile,BufRead *.kt,*.ktm,*.kts		setf kotlin
 au BufNewFile,BufRead *.ks			setf kscript
 
 " Kconfig
-au BufNewFile,BufRead Kconfig,Kconfig.debug	setf kconfig
+au BufNewFile,BufRead Kconfig,Kconfig.debug,Config.in	setf kconfig
 
 " Lace (ISE)
 au BufNewFile,BufRead *.ace,*.ACE		setf lace
@@ -1237,6 +1247,9 @@ au BufNewFile,BufRead *.lua			setf lua
 " Luau
 au BufNewFile,BufRead *.luau		setf luau
 
+" Luau config
+au BufNewFile,BufRead .luaurc		setf jsonc
+
 " Luacheck
 au BufNewFile,BufRead .luacheckrc		setf lua
 
@@ -1339,9 +1352,6 @@ au BufNewFile,BufRead *.mmp			setf mmp
 " ABB Rapid, Modula-2, Modsim III or LambdaProlog
 au BufNewFile,BufRead *.mod\c			call dist#ft#FTmod()
 
-" Modula-2  (.md removed in favor of Markdown, see dist#ft#FTmod for *.MOD)
-au BufNewFile,BufRead *.m2,*.DEF,*.mi		setf modula2
-
 " Modula-3 (.m3, .i3, .mg, .ig)
 au BufNewFile,BufRead *.[mi][3g]		setf modula3
 
@@ -2001,7 +2011,7 @@ au BufNewFile,BufRead catalog			setf catalog
 " Gentoo ebuilds, Arch Linux PKGBUILDs and Alpine Linux APKBUILDs are actually
 " bash scripts.
 " NOTE: Patterns ending in a star are further down, these have lower priority.
-au BufNewFile,BufRead .bashrc,bashrc,bash.bashrc,.bash[_-]profile,.bash[_-]logout,.bash[_-]aliases,bash-fc[-.],*.ebuild,*.bash,*.eclass,PKGBUILD,APKBUILD call dist#ft#SetFileTypeSH("bash")
+au BufNewFile,BufRead .bashrc,bashrc,bash.bashrc,.bash[_-]profile,.bash[_-]logout,.bash[_-]aliases,bash-fc[-.],*.ebuild,*.bash,*.eclass,PKGBUILD,APKBUILD,*.bats call dist#ft#SetFileTypeSH("bash")
 au BufNewFile,BufRead .kshrc,*.ksh call dist#ft#SetFileTypeSH("ksh")
 au BufNewFile,BufRead */etc/profile,.profile,*.sh,*.env call dist#ft#SetFileTypeSH(getline(1))
 
@@ -2390,6 +2400,9 @@ au BufRead,BufNewFile *.vdmpp,*.vpp		setf vdmpp
 au BufRead,BufNewFile *.vdmrt			setf vdmrt
 au BufRead,BufNewFile *.vdmsl,*.vdm		setf vdmsl
 
+" Vento
+au BufNewFile,BufRead *.vto			setf vento
+
 " Vera
 au BufNewFile,BufRead *.vr,*.vri,*.vrh		setf vera
 
@@ -2773,7 +2786,7 @@ au! BufNewFile,BufRead *jarg*
 au BufNewFile,BufRead *.properties_??_??_*	call s:StarSetf('jproperties')
 
 " Kconfig
-au BufNewFile,BufRead Kconfig.*			call s:StarSetf('kconfig')
+au BufNewFile,BufRead Kconfig.*,Config.in.*	call s:StarSetf('kconfig')
 
 " Lilo: Linux loader
 au BufNewFile,BufRead lilo.conf*		call s:StarSetf('lilo')

runtime/ftplugin/aap.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:	Aap recipe
 " Maintainer:	The Vim Project <https://github.com/vim/vim>
-" Last Change:	2023 Aug 10
+" Last Change:	2024 Jan 14
 " Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Only do this when not done yet for this buffer
@@ -28,6 +28,11 @@ setlocal commentstring=#\ %s
 setlocal expandtab
 
 if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
-  let b:browsefilter = "Aap Recipe Files (*.aap)\t*.aap\nAll Files (*.*)\t*.*\n"
+  let b:browsefilter = "Aap Recipe Files (*.aap)\t*.aap\n"
+  if has("win32")
+    let b:browsefilter ..= "All Files (*.*)\t*\n"
+  else
+    let b:browsefilter ..= "All Files (*)\t*\n"
+  endif
   let b:undo_ftplugin ..= " | unlet! b:browsefilter"
 endif

runtime/ftplugin/abap.vim

@@ -3,7 +3,8 @@
 " Author:	Steven Oliver <oliver.steven@gmail.com>
 " Copyright:	Copyright (c) 2013 Steven Oliver
 " License:	You may redistribute this under the same terms as Vim itself
-" Last Change:  2023 Aug 28 by Vim Project (undo_ftplugin)
+" Last Change:	2023 Aug 28 by Vim Project (undo_ftplugin)
+"               2024 Jan 14 by Vim Project (browsefilter)
 " --------------------------------------------------------------------------
 
 " Only do this when not done yet for this buffer
@@ -21,10 +22,14 @@ setlocal suffixesadd=.abap
 let b:undo_ftplugin = "setl sts< sua< sw<"
 
 " Windows allows you to filter the open file dialog
-if has("gui_win32") && !exists("b:browsefilter")
-  let b:browsefilter = "ABAP Source Files (*.abap)\t*.abap\n" .
-                     \ "All Files (*.*)\t*.*\n"
-  let b:undo_ftplugin .= " | unlet! b:browsefilter"
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let b:browsefilter = "ABAP Source Files (*.abap)\t*.abap\n"
+  if has("win32")
+    let b:browsefilter ..= "All Files (*.*)\t*\n"
+  else
+    let b:browsefilter ..= "All Files (*)\t*\n"
+  endif
+  let b:undo_ftplugin ..= " | unlet! b:browsefilter"
 endif
 
 let &cpo = s:cpo_save

runtime/ftplugin/abaqus.vim

@@ -2,6 +2,7 @@
 " Language:     Abaqus finite element input file (www.abaqus.com)
 " Maintainer:   Carl Osterwisch <costerwi@gmail.com>
 " Last Change:  2022 Oct 08
+"               2024 Jan 14 by Vim Project (browsefilter)
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin") | finish | endif
@@ -49,8 +50,12 @@ endif
 if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
     let b:browsefilter = "Abaqus Input Files (*.inp *.inc)\t*.inp;*.inc\n" .
     \ "Abaqus Results (*.dat)\t*.dat\n" .
-    \ "Abaqus Messages (*.pre *.msg *.sta)\t*.pre;*.msg;*.sta\n" .
-    \ "All Files (*.*)\t*.*\n"
+    \ "Abaqus Messages (*.pre, *.msg, *.sta)\t*.pre;*.msg;*.sta\n"
+    if has("win32")
+        let b:browsefilter .= "All Files (*.*)\t*\n"
+    else
+        let b:browsefilter .= "All Files (*)\t*\n"
+    endif
     let b:undo_ftplugin .= "|unlet! b:browsefilter"
 endif
 

runtime/ftplugin/ant.vim

@@ -1,10 +1,11 @@
 " Vim filetype plugin file
-" Language:	ant
+" Language:		ant
 "
 " This runtime file is looking for a new maintainer.
 "
 " Former maintainer:	Dan Sharp
-" Last Changed: 20 Jan 2009
+" Last Change:		2009 Jan 20
+"			2024 Jan 14 by Vim Project (browsefilter)
 
 if exists("b:did_ftplugin") | finish | endif
 
@@ -15,8 +16,12 @@ set cpo-=C
 
 " Define some defaults in case the included ftplugins don't set them.
 let s:undo_ftplugin = ""
-let s:browsefilter = "XML Files (*.xml)\t*.xml\n" .
-	    \	     "All Files (*.*)\t*.*\n"
+let s:browsefilter = "XML Files (*.xml)\t*.xml\n"
+if has("win32")
+    let s:browsefilter .= "All Files (*.*)\t*\n"
+else
+    let s:browsefilter .= "All Files (*)\t*\n"
+endif
 
 runtime! ftplugin/xml.vim ftplugin/xml_*.vim ftplugin/xml/*.vim
 let b:did_ftplugin = 1
@@ -30,7 +35,7 @@ if exists("b:browsefilter")
 endif
 
 " Change the :browse e filter to primarily show Ant-related files.
-if has("gui_win32")
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
     let b:browsefilter = "Build Files (build.xml)\tbuild.xml\n" .
 		\	 "Java Files (*.java)\t*.java\n" .
 		\	 "Properties Files (*.prop*)\t*.prop*\n" .

runtime/ftplugin/asciidoc.vim

@@ -0,0 +1,67 @@
+" Vim filetype plugin file
+" Original Author: Maxim Kim <habamax@gmail.com>
+" Language:        asciidoc
+" Maintainer:      Luca Saccarola <github.e41mv@aleeas.com>
+" Last Change:     2024 Jan 16
+
+if exists("b:did_ftplugin")
+    finish
+endif
+let b:did_ftplugin = 1
+
+if exists('b:undo_ftplugin')
+    let b:undo_ftplugin .= "|setl cms< com< fo< flp< inex< efm< cfu< fde< fdm<"
+else
+    let b:undo_ftplugin = "setl cms< com< fo< flp< inex< efm< cfu< fde< fdm<"
+endif
+
+" gf to open include::file.ext[] and link:file.ext[] files
+setlocal includeexpr=substitute(v:fname,'\\(link:\\\|include::\\)\\(.\\{-}\\)\\[.*','\\2','g')
+
+setlocal comments=
+setlocal commentstring=//\ %s
+
+setlocal formatoptions+=cqn
+setlocal formatlistpat=^\\s*[\\[({]\\?\\([0-9]\\+
+setlocal formatlistpat+=\\\|[a-zA-Z]\\)[\\]:.)}]\\s\\+
+setlocal formatlistpat+=\\\|^\\s*-\\s\\+
+setlocal formatlistpat+=\\\|^\\s*[*]\\+\\s\\+
+setlocal formatlistpat+=\\\|^\\s*[.]\\+\\s\\+
+
+function AsciidocFold()
+    let line = getline(v:lnum)
+
+    if (v:lnum == 1) && (line =~ '^----*$')
+       return ">1"
+    endif
+
+    let nested = get(g:, "asciidoc_foldnested", 1)
+
+    " Regular headers
+    let depth = match(line, '\(^=\+\)\@<=\( .*$\)\@=')
+
+    " Do not fold nested regular headers
+    if depth > 1 && !nested
+        let depth = 1
+    endif
+
+    if depth > 0
+        " fold all sections under title
+        if depth > 1 && !get(g:, "asciidoc_fold_under_title", 1)
+            let depth -= 1
+        endif
+        " check syntax, it should be asciidocTitle or asciidocH
+        let syncode = synstack(v:lnum, 1)
+        if len(syncode) > 0 && synIDattr(syncode[0], 'name') =~ 'asciidoc\%(H[1-6]\)\|Title'
+            return ">" . depth
+        endif
+    endif
+
+    return "="
+endfunction
+
+if has("folding") && get(g:, 'asciidoc_folding', 0)
+    setlocal foldexpr=AsciidocFold()
+    setlocal foldmethod=expr
+    let b:undo_ftplugin .= "|setl foldexpr< foldmethod< foldtext<"
+endif

runtime/ftplugin/aspvbs.vim

@@ -1,10 +1,11 @@
 " Vim filetype plugin file
-" Language:	aspvbs
+" Language:		aspvbs
 "
 " This runtime file is looking for a new maintainer.
 "
 " Former maintainer:	Dan Sharp
-" Last Changed: 20 Jan 2009
+" Last Change:		2009 Jan 20
+"			2024 Jan 14 by Vim Project (browsefilter)
 
 if exists("b:did_ftplugin") | finish | endif
 
@@ -15,8 +16,12 @@ set cpo-=C
 
 " Define some defaults in case the included ftplugins don't set them.
 let s:undo_ftplugin = ""
-let s:browsefilter = "HTML Files (*.html, *.htm)\t*.htm*\n" .
-	    \	     "All Files (*.*)\t*.*\n"
+let s:browsefilter = "HTML Files (*.html, *.htm)\t*.htm*\n"
+if has("win32")
+    let s:browsefilter .= "All Files (*.*)\t*\n"
+else
+    let s:browsefilter .= "All Files (*)\t*\n"
+endif
 let s:match_words = ""
 
 runtime! ftplugin/html.vim ftplugin/html_*.vim ftplugin/html/*.vim
@@ -51,7 +56,7 @@ if exists("loaded_matchit")
 endif
 
 " Change the :browse e filter to primarily show ASP-related files.
-if has("gui_win32")
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
     let  b:browsefilter="ASP Files (*.asp)\t*.asp\n" . s:browsefilter
 endif
 

runtime/ftplugin/awk.vim

@@ -2,7 +2,7 @@
 " Language:		awk, nawk, gawk, mawk
 " Maintainer:		Doug Kearns <dougkearns@gmail.com>
 " Previous Maintainer:	Antonio Colombo <azc100@gmail.com>
-" Last Change:		2020 Sep 28
+" Last Change:		2024 Jan 14
 
 " This plugin was prepared by Mark Sikora
 " This plugin was updated as proposed by Doug Kearns
@@ -25,8 +25,7 @@ setlocal formatoptions-=t formatoptions+=croql
 setlocal define=function
 setlocal suffixesadd+=.awk
 
-let b:undo_ftplugin = "setl fo< com< cms< def< sua<" .
-		    \ " | unlet! b:browsefilter"
+let b:undo_ftplugin = "setl fo< com< cms< def< sua<"
 
 " TODO: set this in scripts.vim?
 if exists("g:awk_is_gawk")
@@ -49,8 +48,13 @@ if exists("g:awk_is_gawk")
 endif
 
 if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
-  let b:browsefilter = "Awk Source Files (*.awk,*.gawk)\t*.awk;*.gawk\n" .
-		     \ "All Files (*.*)\t*.*\n"
+  let b:browsefilter = "Awk Source Files (*.awk, *.gawk)\t*.awk;*.gawk\n"
+  if has("win32")
+    let b:browsefilter .= "All Files (*.*)\t*\n"
+  else
+    let b:browsefilter .= "All Files (*)\t*\n"
+  endif
+  let b:undo_ftplugin .= " | unlet! b:browsefilter"
 endif
 
 let &cpo = s:cpo_save

runtime/ftplugin/basic.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:	BASIC (QuickBASIC 4.5)
 " Maintainer:	Doug Kearns <dougkearns@gmail.com>
-" Last Change:	2022 Jun 22
+" Last Change:	2024 Jan 14
 
 if exists("b:did_ftplugin")
   finish
@@ -45,8 +45,12 @@ endif
 
 if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
   let b:browsefilter = "BASIC Source Files (*.bas)\t*.bas\n" ..
-		\      "BASIC Include Files (*.bi, *.bm)\t*.bi;*.bm\n" ..
-		\      "All Files (*.*)\t*.*\n"
+		\      "BASIC Include Files (*.bi, *.bm)\t*.bi;*.bm\n"
+  if has("win32")
+    let b:browsefilter ..= "All Files (*.*)\t*\n"
+  else
+    let b:browsefilter ..= "All Files (*)\t*\n"
+  endif
   let b:basic_set_browsefilter = 1
   let b:undo_ftplugin ..= " | unlet! b:browsefilter b:basic_set_browsefilter"
 endif

runtime/ftplugin/c.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:	C
 " Maintainer:	The Vim Project <https://github.com/vim/vim>
-" Last Change:	2023 Aug 10
+" Last Change:	2023 Aug 22
 " Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Only do this when not done yet for this buffer
@@ -48,24 +48,26 @@ if !exists("b:match_words")
   let b:undo_ftplugin ..= " | unlet! b:match_skip b:match_words"
 endif
 
-" Win32 can filter files in the browse dialog
+" Win32 and GTK can filter files in the browse dialog
 if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
   if &ft == "cpp"
-    let b:browsefilter = "C++ Source Files (*.cpp *.c++)\t*.cpp;*.c++\n" .
-	  \ "C Header Files (*.h)\t*.h\n" .
-	  \ "C Source Files (*.c)\t*.c\n" .
-	  \ "All Files (*.*)\t*.*\n"
+    let b:browsefilter = "C++ Source Files (*.cpp, *.c++)\t*.cpp;*.c++\n" ..
+	  \ "C Header Files (*.h)\t*.h\n" ..
+	  \ "C Source Files (*.c)\t*.c\n"
   elseif &ft == "ch"
-    let b:browsefilter = "Ch Source Files (*.ch *.chf)\t*.ch;*.chf\n" .
-	  \ "C Header Files (*.h)\t*.h\n" .
-	  \ "C Source Files (*.c)\t*.c\n" .
-	  \ "All Files (*.*)\t*.*\n"
+    let b:browsefilter = "Ch Source Files (*.ch, *.chf)\t*.ch;*.chf\n" ..
+	  \ "C Header Files (*.h)\t*.h\n" ..
+	  \ "C Source Files (*.c)\t*.c\n"
   else
-    let b:browsefilter = "C Source Files (*.c)\t*.c\n" .
-	  \ "C Header Files (*.h)\t*.h\n" .
-	  \ "Ch Source Files (*.ch *.chf)\t*.ch;*.chf\n" .
-	  \ "C++ Source Files (*.cpp *.c++)\t*.cpp;*.c++\n" .
-	  \ "All Files (*.*)\t*.*\n"
+    let b:browsefilter = "C Source Files (*.c)\t*.c\n" ..
+	  \ "C Header Files (*.h)\t*.h\n" ..
+	  \ "Ch Source Files (*.ch, *.chf)\t*.ch;*.chf\n" ..
+	  \ "C++ Source Files (*.cpp, *.c++)\t*.cpp;*.c++\n"
+  endif
+  if has("win32")
+    let b:browsefilter ..= "All Files (*.*)\t*\n"
+  else
+    let b:browsefilter ..= "All Files (*)\t*\n"
   endif
   let b:undo_ftplugin ..= " | unlet! b:browsefilter"
 endif

runtime/ftplugin/clojure.vim

@@ -6,6 +6,7 @@
 " URL:                https://github.com/clojure-vim/clojure.vim
 " License:            Vim (see :h license)
 " Last Change:        2022-03-24
+"                     2024 Jan 14 by Vim Project (browsefilter)
 
 if exists("b:did_ftplugin")
 	finish
@@ -66,10 +67,14 @@ endif
 
 " Filter files in the browse dialog
 if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
-	let b:browsefilter = "All Files\t*\n" .
-				\ "Clojure Files\t*.clj;*.cljc;*.cljs;*.cljx\n" .
+	let b:browsefilter = "Clojure Files\t*.clj;*.cljc;*.cljs;*.cljx\n" .
 				\ "EDN Files\t*.edn\n" .
 				\ "Java Files\t*.java\n"
+	if has("win32")
+		let b:browsefilter .= "All Files (*.*)\t*\n"
+	else
+		let b:browsefilter .= "All Files (*)\t*\n"
+	endif
 	let b:undo_ftplugin .= ' | unlet! b:browsefilter'
 endif
 

runtime/ftplugin/cobol.vim

@@ -3,6 +3,7 @@
 " Maintainer: Ankit Jain <ajatkj@yahoo.co.in>
 "     (formerly Tim Pope <vimNOSPAM@tpope.info>)
 " Last Update:	By Ankit Jain (add gtk support) on 15.08.2020
+"		2024 Jan 14 by Vim Project (browsefilter)
 
 " Insert mode mappings: <C-T> <C-D> <Tab>
 " Normal mode mappings: < > << >> [[ ]] [] ][
@@ -39,8 +40,12 @@ endif
 
 " add gtk support
 if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
-  let b:browsefilter = "COBOL Source Files (*.cbl, *.cob)\t*.cbl;*.cob;*.lib\n".
-		     \ "All Files (*.*)\t*.*\n"
+  let b:browsefilter = "COBOL Source Files (*.cbl, *.cob)\t*.cbl;*.cob;*.lib\n"
+  if has("win32")
+    let b:browsefilter .= "All Files (*.*)\t*\n"
+  else
+    let b:browsefilter .= "All Files (*)\t*\n"
+  endif
 endif
 
 let b:undo_ftplugin = "setlocal com< cms< fo< et< tw<" .

runtime/ftplugin/config.vim

@@ -1,10 +1,11 @@
 " Vim filetype plugin file
-" Language:	config
+" Language:		config
 "
 " This runtime file is looking for a new maintainer.
 "
 " Former maintainer:	Dan Sharp
-" Last Changed: 20 Jan 2009
+" Last Change: 		2009 Jan 20
+"			2024 Jan 14 by Vim Project (browsefilter)
 
 if exists("b:did_ftplugin") | finish | endif
 
@@ -15,8 +16,12 @@ set cpo-=C
 
 " Define some defaults in case the included ftplugins don't set them.
 let s:undo_ftplugin = ""
-let s:browsefilter = "Bourne Shell Files (*.sh)\t*.sh\n" .
-	    \	 "All Files (*.*)\t*.*\n"
+let s:browsefilter = "Bourne Shell Files (*.sh)\t*.sh\n"
+if has("win32")
+    let s:browsefilter .= "All Files (*.*)\t*\n"
+else
+    let s:browsefilter .= "All Files (*)\t*\n"
+endif
 let s:match_words = ""
 
 runtime! ftplugin/sh.vim ftplugin/sh_*.vim ftplugin/sh/*.vim
@@ -31,7 +36,7 @@ if exists("b:browsefilter")
 endif
 
 " Change the :browse e filter to primarily show configure-related files.
-if has("gui_win32")
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
     let  b:browsefilter="Configure Scripts (configure.*, config.*)\tconfigure*;config.*\n" .
 		\	s:browsefilter
 endif

runtime/ftplugin/cs.vim

@@ -3,6 +3,7 @@
 " Maintainer:          Nick Jensen <nickspoon@gmail.com>
 " Former Maintainer:   Johannes Zellner <johannes@zellner.org>
 " Last Change:         2022-11-16
+"                      2024 Jan 14 by Vim Project (browsefilter)
 " License:             Vim (see :h license)
 " Repository:          https://github.com/nickspoons/vim-cs
 
@@ -31,10 +32,14 @@ if exists('loaded_matchit') && !exists('b:match_words')
 endif
 
 if (has('gui_win32') || has('gui_gtk')) && !exists('b:browsefilter')
-  let b:browsefilter = "C# Source Files (*.cs *.csx)\t*.cs;*.csx\n" .
+  let b:browsefilter = "C# Source Files (*.cs, *.csx)\t*.cs;*.csx\n" .
         \              "C# Project Files (*.csproj)\t*.csproj\n" .
-        \              "Visual Studio Solution Files (*.sln)\t*.sln\n" .
-        \              "All Files (*.*)\t*.*\n"
+        \              "Visual Studio Solution Files (*.sln)\t*.sln\n"
+  if has("win32")
+    let b:browsefilter ..= "All Files (*.*)\t*\n"
+  else
+    let b:browsefilter ..= "All Files (*)\t*\n"
+  endif
   let b:undo_ftplugin .= ' | unlet! b:browsefilter'
 endif
 

runtime/ftplugin/csh.vim

@@ -3,7 +3,7 @@
 " Maintainer:		Doug Kearns <dougkearns@gmail.com>
 " Previous Maintainer:	Dan Sharp
 " Contributor:		Johannes Zellner <johannes@zellner.org>
-" Last Change:		2023 Oct 09
+" Last Change:		2024 Jan 14
 
 if exists("b:did_ftplugin")
   finish
@@ -44,8 +44,12 @@ if exists("loaded_matchit") && !exists("b:match_words")
 endif
 
 if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
-  let b:browsefilter = "csh Scripts (*.csh)\t*.csh\n" ..
-	\	       "All Files (*.*)\t*.*\n"
+  let b:browsefilter = "csh Scripts (*.csh)\t*.csh\n"
+  if has("win32")
+    let b:browsefilter ..= "All Files (*.*)\t*\n"
+  else
+    let b:browsefilter ..= "All Files (*)\t*\n"
+  endif
   let b:csh_set_browsefilter = 1
   let b:undo_ftplugin ..= " | unlet! b:browsefilter b:csh_set_browsefilter"
 endif

runtime/ftplugin/deb822sources.vim

@@ -0,0 +1,16 @@
+" Language:     Debian sources.list
+" Maintainer:   Debian Vim Maintainers <team+vim@tracker.debian.org>
+" Last Change:  2024 Mar 20
+" License:      Vim License
+" URL:          https://salsa.debian.org/vim-team/vim-debian/blob/main/ftplugin/deb822sources.vim
+
+if exists('b:did_ftplugin')
+  finish
+endif
+let b:did_ftplugin=1
+
+setlocal comments=:#
+setlocal commentstring=#%s
+setlocal formatoptions-=t
+
+let b:undo_ftplugin = 'setlocal comments< commentstring< formatoptions<'

runtime/ftplugin/diff.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:	Diff
 " Maintainer:	The Vim Project <https://github.com/vim/vim>
-" Last Change:	2023 Aug 10
+" Last Change:	2023 Aug 22
 " Former Maintainer:	Bram Moolenaar <Bram@vim.org>
 
 " Only do this when not done yet for this buffer
@@ -19,6 +19,11 @@ setlocal nomodeline
 let &l:commentstring = "# %s"
 
 if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
-  let b:browsefilter = "Diff Files (*.diff)\t*.diff\nPatch Files (*.patch)\t*.h\nAll Files (*.*)\t*.*\n"
+  let b:browsefilter = "Diff Files (*.diff)\t*.diff\nPatch Files (*.patch)\t*.h\n"
+  if has("win32")
+    let b:browsefilter ..= "All Files (*.*)\t*\n"
+  else
+    let b:browsefilter ..= "All Files (*)\t*\n"
+  endif
   let b:undo_ftplugin ..= " | unlet! b:browsefilter"
 endif

runtime/ftplugin/dosbatch.vim

@@ -2,6 +2,7 @@
 " Language:    MS-DOS/Windows .bat files
 " Maintainer:  Mike Williams <mrmrdubya@gmail.com>
 " Last Change: 12th February 2023
+"              2024 Jan 14 by Vim Project (browsefilter)
 "
 " Options Flags:
 " dosbatch_colons_comment       - any value to treat :: as comment line
@@ -37,12 +38,17 @@ if executable('help.exe')
 endif
 
 " Define patterns for the browse file filter
-if has("gui_win32") && !exists("b:browsefilter")
-  let b:browsefilter = "DOS Batch Files (*.bat, *.cmd)\t*.bat;*.cmd\nAll Files (*.*)\t*.*\n"
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let b:browsefilter = "DOS Batch Files (*.bat, *.cmd)\t*.bat;*.cmd\n"
+  if has("win32")
+    let b:browsefilter ..= "All Files (*.*)\t*\n"
+  else
+    let b:browsefilter ..= "All Files (*)\t*\n"
+  endif
 endif
 
 let b:undo_ftplugin = "setlocal comments< formatoptions< keywordprg<"
-    \ . "| unlet! b:browsefiler"
+    \ . "| unlet! b:browsefilter"
 
 let &cpo = s:cpo_save
 unlet s:cpo_save

runtime/ftplugin/dtd.vim

@@ -1,10 +1,11 @@
 " Vim filetype plugin file
-" Language:	dtd
+" Language:		dtd
 "
 " This runtime file is looking for a new maintainer.
 "
 " Former maintainer:	Dan Sharp
-" Last Changed: 20 Jan 2009
+" Last Change:		2009 Jan 20
+"			2024 Jan 14 by Vim Project (browsefilter)
 
 if exists("b:did_ftplugin") | finish | endif
 let b:did_ftplugin = 1
@@ -27,10 +28,14 @@ if exists("loaded_matchit")
 endif
 
 " Change the :browse e filter to primarily show Java-related files.
-if has("gui_win32")
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
     let  b:browsefilter="DTD Files (*.dtd)\t*.dtd\n" .
-		\	"XML Files (*.xml)\t*.xml\n" .
-		\	"All Files (*.*)\t*.*\n"
+		\	"XML Files (*.xml)\t*.xml\n"
+    if has("win32")
+	let b:browsefilter .= "All Files (*.*)\t*\n"
+    else
+	let b:browsefilter .= "All Files (*)\t*\n"
+    endif
 endif
 
 " Undo the stuff we changed.

runtime/ftplugin/eiffel.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin
 " Language:	Eiffel
 " Maintainer:	Doug Kearns <dougkearns@gmail.com>
-" Last Change:	2010 Aug 29
+" Last Change:	2024 Jan 14
 
 if (exists("b:did_ftplugin"))
   finish
@@ -18,8 +18,12 @@ setlocal formatoptions-=t formatoptions+=croql
 
 if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
   let b:browsefilter = "Eiffel Source Files (*.e)\t*.e\n" .
-		     \ "Eiffel Control Files (*.ecf, *.ace, *.xace)\t*.ecf;*.ace;*.xace\n" .
-		     \ "All Files (*.*)\t*.*\n"
+		     \ "Eiffel Control Files (*.ecf, *.ace, *.xace)\t*.ecf;*.ace;*.xace\n"
+  if has("win32")
+    let b:browsefilter .= "All Files (*.*)\t*\n"
+  else
+    let b:browsefilter .= "All Files (*)\t*\n"
+  endif
 endif
 
 if exists("loaded_matchit") && !exists("b:match_words")

runtime/ftplugin/eruby.vim

@@ -4,6 +4,7 @@
 " URL:			https://github.com/vim-ruby/vim-ruby
 " Release Coordinator:	Doug Kearns <dougkearns@gmail.com>
 " Last Change:		2022 May 15
+"			2024 Jan 14 by Vim Project (browsefilter)
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -15,7 +16,11 @@ set cpo-=C
 
 " Define some defaults in case the included ftplugins don't set them.
 let s:undo_ftplugin = ""
-let s:browsefilter = "All Files (*.*)\t*.*\n"
+if has("win32")
+  let s:browsefilter = "All Files (*.*)\t*\n"
+else
+  let s:browsefilter = "All Files (*)\t*\n"
+endif
 let s:match_words = ""
 
 if !exists("g:eruby_default_subtype")
@@ -109,8 +114,8 @@ exe 'cmap <buffer><script><expr> <Plug><cfile> ErubyAtCursor() ? ' . maparg('<Pl
 exe 'cmap <buffer><script><expr> <Plug><ctag> ErubyAtCursor() ? ' . maparg('<Plug><ctag>', 'c') . ' : ' . get(s:ctagmap, 'rhs', '"\022\027"')
 unlet s:cfilemap s:ctagmap s:include s:path s:suffixesadd
 
-" Change the browse dialog on Win32 to show mainly eRuby-related files
-if has("gui_win32")
+" Change the browse dialog on Win32 and GTK to show mainly eRuby-related files
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
   let b:browsefilter="eRuby Files (*.erb, *.rhtml)\t*.erb;*.rhtml\n" . s:browsefilter
 endif
 

runtime/ftplugin/expect.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:	Expect
 " Maintainer:	Doug Kearns <dougkearns@gmail.com>
-" Last Change:	2022 Jul 16
+" Last Change:	2024 Jan 14
 
 if exists("b:did_ftplugin")
   finish
@@ -14,8 +14,12 @@ let s:cpo_save = &cpo
 set cpo&vim
 
 if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
-  let b:browsefilter = "Expect Command Files (*.exp)\t*.exp\n" ..
-	\	       "All Files (*.*)\t*.*\n"
+  let b:browsefilter = "Expect Command Files (*.exp)\t*.exp\n"
+  if has("win32")
+    let b:browsefilter ..= "All Files (*.*)\t*\n"
+  else
+    let b:browsefilter ..= "All Files (*)\t*\n"
+  endif
 endif
 
 let &cpo = s:cpo_save

runtime/ftplugin/falcon.vim

@@ -4,6 +4,7 @@
 " Copyright:    Copyright (c) 2009-2013 Steven Oliver
 " License:      You may redistribute this under the same terms as Vim itself
 " Last Update:  2020 Oct 10
+"               2024 Jan 14 by Vim Project (browsefilter)
 " --------------------------------------------------------------------------
 
 " Only do this when not done yet for this buffer
@@ -34,14 +35,18 @@ endif
 setlocal comments=sO:*\ -,mO:*\ \ ,exO:*/,s1:/*,mb:*,ex:*/,://
 
 " Windows allows you to filter the open file dialog
-if has("gui_win32") && !exists("b:browsefilter")
-  let b:browsefilter = "Falcon Source Files (*.fal *.ftd)\t*.fal;*.ftd\n" .
-                     \ "All Files (*.*)\t*.*\n"
+if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
+  let b:browsefilter = "Falcon Source Files (*.fal, *.ftd)\t*.fal;*.ftd\n"
+  if has("win32")
+    let b:browsefilter ..= "All Files (*.*)\t*\n"
+  else
+    let b:browsefilter ..= "All Files (*)\t*\n"
+  endif
 endif
 
 let b:undo_ftplugin = "setlocal tabstop< shiftwidth< expandtab< fileencoding<"
 	\ . " suffixesadd< comments<"
-	\ . "| unlet! b:browsefiler"
+	\ . "| unlet! b:browsefilter"
 
 let &cpo = s:cpo_save
 unlet s:cpo_save

runtime/ftplugin/forth.vim

@@ -2,6 +2,7 @@
 " Language:	Forth
 " Maintainer:	Johan Kotlinski <kotlinski@gmail.com>
 " Last Change:	2023 Sep 15
+"		2024 Jan 14 by Vim Project (browsefilter)
 " URL:		https://github.com/jkotlinski/forth.vim
 
 if exists("b:did_ftplugin")
@@ -62,8 +63,12 @@ if exists("loaded_matchit") && !exists("b:match_words")
 endif
 
 if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
-  let b:browsefilter = "Forth Source Files (*.f *.fs *.ft *.fth *.4th)\t*.f;*.fs;*.ft;*.fth;*.4th\n" ..
-	\	       "All Files (*.*)\t*.*\n"
+  let b:browsefilter = "Forth Source Files (*.f, *.fs, *.ft, *.fth, *.4th)\t*.f;*.fs;*.ft;*.fth;*.4th\n"
+  if has("win32")
+    let b:browsefilter ..= "All Files (*.*)\t*\n"
+  else
+    let b:browsefilter ..= "All Files (*)\t*\n"
+  endif
   let b:undo_ftplugin ..= " | unlet! b:browsefilter"
 endif
 

runtime/ftplugin/fortran.vim

@@ -9,6 +9,8 @@
 "  Since then, useful suggestions and contributions have been made, in order, by:
 "  Stefano Zacchiroli, Hendrik Merx, Ben Fritz, David Barnett, Eisuke Kawashima,
 "  Doug Kearns, and Fritz Reese.
+" Last Change:	2023 Dec 22
+"		2024 Jan 14 by Vim Project (browsefilter)
 
 " Only do these settings when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -135,8 +137,12 @@ endif
 
 " File filters for :browse e
 if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
-  let b:browsefilter = "Fortran Files (*.f;*.for;*.f77;*.f90;*.f95;*.f03;*.f08;*.fpp;*.ftn)\t*.f;*.for;*.f77;*.f90;*.f95;*.f03;*.f08;*.fpp;*.ftn\n" .
-    \ "All Files (*.*)\t*.*\n"
+  let b:browsefilter = "Fortran Files (*.f, *.for, *.f77, *.f90, *.f95, *.f03, *.f08, *.fpp, *.ftn)\t*.f;*.for;*.f77;*.f90;*.f95;*.f03;*.f08;*.fpp;*.ftn\n"
+  if has("win32")
+    let b:browsefilter .= "All Files (*.*)\t*\n"
+  else
+    let b:browsefilter .= "All Files (*)\t*\n"
+  endif
 endif
 
 let b:undo_ftplugin = "setl fo< com< tw< cms< et< inc< sua<"

runtime/ftplugin/fpcmake.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:	Free Pascal Makefile Generator
 " Maintainer:	Doug Kearns <dougkearns@gmail.com>
-" Last Change:	2021 Apr 23
+" Last Change:	2024 Jan 14
 
 if exists("b:did_ftplugin")
   finish
@@ -13,11 +13,15 @@ set cpo&vim
 runtime! ftplugin/make.vim
 
 if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
-  let b:browsefilter = "Free Pascal Makefile Definition Files (*.fpc)\t*.fpc\n" ..
-		     \ "All Files (*.*)\t*.*\n"
+  let b:browsefilter = "Free Pascal Makefile Definition Files (*.fpc)\t*.fpc\n"
+  if has("win32")
+    let b:browsefilter ..= "All Files (*.*)\t*\n"
+  else
+    let b:browsefilter ..= "All Files (*)\t*\n"
+  endif
+  let b:undo_ftplugin ..= " | unlet! b:browsefilter"
 endif
 
-let b:undo_ftplugin = b:undo_ftplugin .. " | unlet! b:browsefilter"
 
 let &cpo = s:cpo_save
 unlet s:cpo_save

runtime/ftplugin/freebasic.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:	FreeBASIC
 " Maintainer:	Doug Kearns <dougkearns@gmail.com>
-" Last Change:	2022 Jun 24
+" Last Change:	2023 Aug 22
 
 " Setup {{{1
 if exists("b:did_ftplugin")
@@ -70,8 +70,12 @@ endif
 
 if (has("gui_win32") || has("gui_gtk")) && exists("b:basic_set_browsefilter")
   let b:browsefilter = "FreeBASIC Source Files (*.bas)\t*.bas\n" ..
-		\      "FreeBASIC Header Files (*.bi)\t*.bi\n" ..
-		\      "All Files (*.*)\t*.*\n"
+		\      "FreeBASIC Header Files (*.bi)\t*.bi\n"
+  if has("win32")
+    let b:browsefilter ..= "All Files (*.*)\t*\n"
+  else
+    let b:browsefilter ..= "All Files (*)\t*\n"
+  endif
 endif
 
 " Cleanup {{{1

runtime/ftplugin/haml.vim

@@ -2,6 +2,7 @@
 " Language:	Haml
 " Maintainer:	Tim Pope <vimNOSPAM@tpope.org>
 " Last Change:	2019 Dec 05
+"		2024 Jan 14 by Vim Project (browsefilter)
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -13,7 +14,11 @@ set cpo-=C
 
 " Define some defaults in case the included ftplugins don't set them.
 let s:undo_ftplugin = ""
-let s:browsefilter = "All Files (*.*)\t*.*\n"
+if has("win32")
+  let s:browsefilter = "All Files (*.*)\t*\n"
+else
+  let s:browsefilter = "All Files (*)\t*\n"
+endif
 let s:match_words = ""
 
 runtime! ftplugin/html.vim ftplugin/html_*.vim ftplugin/html/*.vim
@@ -44,14 +49,14 @@ if exists("b:undo_ftplugin")
   let s:undo_ftplugin = b:undo_ftplugin . " | " . s:undo_ftplugin
 endif
 if exists ("b:browsefilter")
-  let s:browsefilter = substitute(b:browsefilter,'\cAll Files (\*\.\*)\t\*\.\*\n','','') . s:browsefilter
+  let s:browsefilter = substitute(b:browsefilter,'\cAll Files (.*)\t\*\n','','') . s:browsefilter
 endif
 if exists("b:match_words")
   let s:match_words = b:match_words . ',' . s:match_words
 endif
 
-" Change the browse dialog on Win32 to show mainly Haml-related files
-if has("gui_win32")
+" Change the browse dialog on Win32 and GTK to show mainly Haml-related files
+if has("gui_win32") || has("gui_gtk")
   let b:browsefilter="Haml Files (*.haml)\t*.haml\nSass Files (*.sass)\t*.sass\n" . s:browsefilter
 endif
 
@@ -62,7 +67,7 @@ endif
 
 setlocal comments= commentstring=-#\ %s
 
-let b:undo_ftplugin = "setl def< cms< com< "
+let b:undo_ftplugin = "setl def< cms< com< " .
       \ " | unlet! b:browsefilter b:match_words | " . s:undo_ftplugin
 
 let &cpo = s:save_cpo

runtime/ftplugin/html.vim

@@ -2,7 +2,7 @@
 " Language:		HTML
 " Maintainer:		Doug Kearns <dougkearns@gmail.com>
 " Previous Maintainer:	Dan Sharp
-" Last Changed:		2022 Jul 20
+" Last Change:		2024 Jan 14
 
 if exists("b:did_ftplugin")
   finish
@@ -43,10 +43,14 @@ endif
 
 " Change the :browse e filter to primarily show HTML-related files.
 if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
-  let  b:browsefilter = "HTML Files (*.html *.htm)\t*.htm;*.html\n" ..
+  let  b:browsefilter = "HTML Files (*.html, *.htm)\t*.html;*.htm\n" ..
 	\		"JavaScript Files (*.js)\t*.js\n" ..
-	\		"Cascading StyleSheets (*.css)\t*.css\n" ..
-	\		"All Files (*.*)\t*.*\n"
+	\		"Cascading StyleSheets (*.css)\t*.css\n"
+  if has("win32")
+    let b:browsefilter ..= "All Files (*.*)\t*\n"
+  else
+    let b:browsefilter ..= "All Files (*)\t*\n"
+  endif
   let b:html_set_browsefilter = 1
   let b:undo_ftplugin ..= " | unlet! b:browsefilter b:html_set_browsefilter"
 endif

runtime/ftplugin/hurl.vim

@@ -0,0 +1,11 @@
+" Vim filetype plugin file
+" Language:     hurl
+" Maintainer:   Melker Ulander <melker.ulander@pm.me>
+" Last Changed: 2024 01 26
+
+if exists("b:did_ftplugin") | finish | endif
+
+let b:did_ftplugin = 1
+setlocal commentstring=#\ %s
+
+let b:undo_ftplugin = "setlocal commentstring<"