Problem: Using the Wayland backend in GTK, rendering remains slow due
to per-line redraws, unnecessary Cairo push/pop groups, and
scroll operations that allocate new surfaces repeatedly.
Solution: Improve rendering performance (Christoffer Aasted).
This commit does the following:
- Add gui.is_wayland to detect Wayland backend
- Avoid blocking the input loop
- Skip early redraws; let the compositor handle full-screen redraws
- Use CAIRO_OPERATOR_SOURCE to overwrite instead of blend
- Reuse scroll source region for destination scroll region
- Optimize fast scroll-up
- Remove cairo_push_group/pop_group and cairo_clip in scroll path
to reduce allocations (~50MB saved on 4K fractional scale)
Since Wayland redraws the entire screen between updates (unlike X11),
further performance gains are possible by batching drawing in other code
paths, e.g.:
- message.c: batch lines to avoid scroll
- term.c: batch terminal redraws
These could be refactored later to deferred redraw with Wayland.
closes: #19062
Signed-off-by: Christoffer Aasted <dezzadk@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: the tests test_cindent_* functions were numbered
inconsistently, causing them to be executed in wrong order.
Solution: Rename the test_cindent functions with zero-padded numbers.
Signed-off-by: Christian Brabandt <cb@256bit.org>
- ':!' is not stable, so use system() to get more consistent behaviour.
- Only warns when using 'pwsh'.
- Remove trailing spaces.
closes: #19370
Co-Authored-by: @lxhillwind
Signed-off-by: Mao-Yining <mao.yining@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: MS-Windows: font size calculation may be wrong when font does
not specify a valid ascent value. (Char, after v9.1.2129)
Solution: Calculate ascent as a ratio of ascent to total font height
with a fallback if metrics are zero.
Fallback to default value when font does not specify ascent value.
As proposed in https://github.com/vim/vim/pull/19318#issuecomment-3864669253
related: #19318
closes: #19367
Signed-off-by: Char <peacech@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Comment lines which start like a label are recognized as a
label and indented based on that.
Solution: Check if the position is in a comment after recognizing a label
in cin_islabel (Anttoni Erkkilä)
closes: #19397
Signed-off-by: Anttoni Erkkilä <anttoni.erkkila@protonmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: powershell commands wrongly wrapped when executed
Solution: Use &{ ... } to wrap commands when powershell/pwsh is in use
(Peter Lustig).
Allow compound commands with 'system()' when 'shell' is 'pwsh'
When the 'shell' option was set to 'powershell' or 'pwsh' and the
'system()' vimscript function was called with an argument containing two
or more shell commands (delimited by ';' or '&'), the function would
always fail with 'E282'.
The cause of the error was that VIM would wrap the shell command string
with parentheses (to allow the entire output to be redirected to a
temporary file for capturing) before actually passing it to the
PowerShell process for execution.
Unlike the typical shell that uses parentheses to group commands (and
possibly spawn a subshell), PowerShell uses them to resolve a single
command (pipeline) to an expression. To group multiple commands with
PowerShell, you must instead wrap them with either the subexpression
operator '$(...)' or an immediately evaluated script block '& { ... }'.
The latter option may be more efficient since it does not buffer its
output like for the former one does.
closes: #19401
Signed-off-by: Peter Lustig <tiamatX18@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Coverity reports unreachable code, CID: 1681310
Solution: Drop the ternary checking for non-NULL of from_encoding_raw.
closes: #19402
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Makefile: dosrt target fails because of duplicate lang directories
Solution: Rename the parent lang/ directory to readme/
Signed-off-by: Christian Brabandt <cb@256bit.org>
Remove `nextgroup=shComment` from the `shEscape` syntax pattern.
This was causing `#` characters after escape sequences inside
double-quoted strings to be misinterpreted as comments, breaking
highlighting for the rest of the file.
Add a test case for escaped characters followed by # in double quotes.
fixes: #19053closes: #19414
Signed-off-by: Bozhidar Batsov <bozhidar@batsov.dev>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: str2specialbuf() can be improved
Solution: Optimize str2specialbuf function in message.c
(Yasuhiro Matsumoto)
closes: #19415
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: Test_popup_setbuf fails, because the dump file contains
a reference to Vim version 9.1 (after v9.2.0000)
Solution: Replace Version number by 9.1 always.
closes: #19406
Signed-off-by: Christian Brabandt <cb@256bit.org>
Effective use of 'formatprg' requires both an understanding of the
specific capabilities of the formatting tool and Vim's formatting
commands. This is overly burdensome for some users.
Rather than address each complaint on a filetype by filetype basis,
remove 'formatprg' settings from all ftplugins.
It is expected that formatter plugins will be available in the near
future as a better solution. See #17145 (Add "formatter" feature using
"compiler" as a template).
Note: 'formatprg' will be removed from older ftplugins after the release
of Vim 9.2. The setting was added to the go and gleam ftplugins during
the current development cycle and have not been included in a Vim
release.
See: #18650 (rust.vim: stop setting formatprg to rustfmt)
closes: #19108
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
The username/group/netgroup patterns used \l\+ which only matched
lowercase letters. Linux usernames commonly contain hyphens, digits,
and underscores (e.g. www-data, deploy01, test_user).
Update the pattern to \l[-a-z0-9_]* to allow matching the additional
characters "-_" and numbers.
fixes: #18963closes: #19396
Signed-off-by: Bozhidar Batsov <bozhidar@batsov.dev>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Use ellipses, matching the file's general style, rather than hard
truncation of overlength tail comments in examples.
closes: #19298
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Installing man pages does not change the placeholder file paths
Solution: Update the sed patterns in installman.sh
Additionally we remove the sed command to update the path to the ps Vim
files for those reasons:
- All the postscript files were moved to the print/ subdirectory in
Commit e37d50a
- the sed command was wrongly quoting $vimloc so would wrongly try to
search for the literal value $vimloc instead of using the expanded
value.
related: ce6fe84db2
closes: #19382
Signed-off-by: Julio B <julio.bacel@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Amend syntax highlighting to allow for ksh93 discipline function names
(e.g. 'foo.get()') and mksh's odd function naming idiosyncrasies
(shNamespaceOne was introduced to enforce stricter naming rules for
ksh93 namespaces).
- Remove 'bind' from ksh93 syntax (such a builtin has never been
implemented in ksh93).
- 'xgrep' is only available in ksh93v- as an alternative way to
invoke the builtin 'grep -X', so reflect that in the syntax
highlighting.
- Forbid bash-style 'function name() {' syntax when highlighting
ksh88 and ksh93 scripts.
- Fix bug causing ' ()' to be incorrectly validated in mksh scripts.
- Add the many ksh93/ksh2020 .sh.* variables to the list of special
variables.
- Amend iskeyword to allow '.' so that '.sh.tilde.get' and such are
valid function names/variable names. (For mksh functions starting
with odd characters like '%' and '@' this would probably have too
many bad side effects, so I've omitted such a change for that shell.)
- Add new syntax tests and regenerate syntax dump files
closes: #19383
Signed-off-by: Johnothan King <johnothanking@protonmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
We add new key exchange algorithms and new enums for PubkeyAuthOptions.
We also add new keywords from sshd_config.5 not present here and remove
keywords present here that are not present in the official
documentation, with the exception of those patched in by Debian and
Fedora, as well as ChallengeResponseAuthentication which is deprecated
but still functional.
closes: #19347
Signed-off-by: Fionn Fitzmaurice <git@fionn.computer>
Signed-off-by: Jakub Jelen <jakuje@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Dynamically set mark "`" to pair disparate lines and
initially set marks "`a", "`b", etc. for as many lines in
the difference part. Note that users are free to delete
or change any set alphabetic marks without it affecting
the dynamic updating of mark "`"; alphabetic marks only
serve to help with arriving at "summary" lines, e.g.
"`a````".
- Create a fold for the difference part (but defer to users
the closing of it) so that disparate lines that fit real
estate can be viewed at the same time, as an alternative
to the builtin "s" keystroke that swaps top and bottom
parts in place.
- Fold and mark lines with the "git difftool" extension too.
closes: #19380
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: `gf` in Vim script fails if multiple target files exist.
Solution: Use globpath() which returns an array.
In a Vim script, `gf` on `some#func()` will jump to `autoload/some.vim`.
In this case, if there are multiple `autoload/foo.vim`s in
'runtimepath', `globpath(&runtimepath, path)` will return multiple
paths, separated by newlines.
As a result, the second and subsequent paths will be executed as
commands in `autoload/vimgoto.vim:195`, causing an error.
This change fixes this issue by making the result of `globpath()` an
array.
closes: #19379
Signed-off-by: thinca <thinca@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
In particular, also mention the difference between the regex atom \k and
what Vim considers for a word character.
closes: #18688
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When garbage collection runs, the list of recorded buffer
changes may be incorrectly freed (Sainnhe Park).
Solution: In garbage_collect(), iterate through all buffers and call
set_ref_in_list() for b_recorded_changes to ensure the list
and its contents are marked as reachable (Paul Ollis).
fixes: #19300closes: #19375
Signed-off-by: Paul Ollis <paul@cleversheep.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When a popup window partially overlaps a wide character
it results in truncated or garbage display.
Solution: When a wide character is partially blocked by a popup, clear both
cells in the screen buffer to prevent garbage (Yasuhiro Matsumoto).
closes: #19271
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: MS-Windows: mouse scroll events not handled for popups
Solution: Do not return early (Mao-Yining)
Ensure mouse wheel events on popup windows are properly processed by
sending the corresponding key messages. Previously, early returns
prevented normal event flow, causing popup windows to ignore scroll
input.
fixes: #19353closes: #19369
Signed-off-by: Mao-Yining <mao.yining@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
The set_by_lua_block directive of the Lua module takes an additional
variable as an argument which currently breaks the detection of inline
Lua blocks. For example:
set_by_lua_block $myvar {
return tonumber(ngx.var.myothervar)-1
}
closes: #19362
Signed-off-by: Josef Schönberger <josef.schoenberger@tum.de>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Truncation when serializing libsodium encryption parameters.
Solution: Correctly cast to long long type (Yasuhiro Matsumoto).
fixes: #19248closes: #19357
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Change syntax file maintainer.
- Add Guile and Python command highlighting.
- Update command list to version 12.
- Add foldable regions for the commands 'define', 'if' and 'while'
multiline commands.
- Support documented partial command names.
- Add matchit, browsefilter, and comment formatting support.
- Support embedded C in compiler {code|print} commands.
- Add largely complete settings highlighting and folding.
- Add syntax tests (incomplete).
Thanks to Claudio Fleiner for many years of maintenance.
closes: #10649
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
This reverts commit 0fde6aebdd.
With "v9.1.2134" applied, arbitrary multibyte characters are
not replaced with spurious U+FFFD characters (typically when
the host system is under load); U+FFFD characters that are
intentionally written in an input file continue to remain
present for later output and comparison. The workaround of
"v9.1.1592~3" is no longer necessary.
Also prefer "page_nr" to "nr" in syntax/testdir/runtest.vim
closes: #19348
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Buffer overflow in :wlrestore command, caused by assuming
wrong buffer length in vwl_log_handler() (Seungyeon Park)
Solution: Use correct buffer size (512 bytes) in vim_vsnprintf()
to properly truncate long messages.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: With 'autochdir' win_execute() can corrupt the buffer name,
causing :write to use wrong path.
Solution: Save and restore b_fname when 'autochdir' is active
(Ingo Karkat).
This is caused by a bad interaction of the 'autochdir' behavior,
overriding of the current directory via :lchdir, and the temporary
window switching done by win_execute(), manifesting when e.g. a custom
completion inspects other buffers:
1. In the initial state after the :lcd .. we have curbuf->b_fname =
"Xsubdir/file".
2. do_autochdir() is invoked, temporarily undoing the :lcd .., changing
back into the Xsubdir/ subdirectory.
3. win_execute() switches windows, triggering win_enter_ext() →
win_fix_current_dir() → shorten_fnames(TRUE)
4. shorten_fnames() processes *all* buffers
5. shorten_buf_fname() makes the filename relative to the current
(wrong) directory; b_fname becomes "file" instead of "Xsubdir/file"
6. Directory restoration correctly restores working directory via
mch_chdir() (skipping a second do_autochdir() invocation because
apply_acd is FALSE), but b_fname remains corrupted, with the
"Xsubdir/" part missing.
7. expand("%:p") (and commands like :write) continue to use the
corrupted filename, resolving to a wrong path that's missing the
"Xsubdir/" part.
To fix the problem the short filename is saved if its in effect (i.e.
pointed to by curbuf->b_fname) and 'autochdir' happened. It's then
restored in case of a local cwd override. The conditions limit this
workaround to when 'autochdir' is active *and* overridden by a :lchdir.
closes: #19343
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Ingo Karkat <swdev@ingo-karkat.de>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Some tests are not valid on OpenBSD.
Solution: Add CheckNotOpenBSD, use it to skip certain tests
(Kevin Goodsell).
Test_readdirex_sort performs locale-dependent sorting. OpenBSD has
minimal locale support.
Test_stdin_no_newline hangs on OpenBSD and FreeBSD. I don't know exactly
why, but it may be due to bash not exiting at the end of the test. This
is skipped in the FreeBSD CI runs because bash is not installed.
Test_detect_fifo uses /dev/fd/ files (via process substitution) as
FIFOs. On OpenBSD the files in /dev/fd are not FIFOs.
closes: #19351
Signed-off-by: Kevin Goodsell <kevin-opensource@omegacrash.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: :tab sbuffer may close old tabpage if BufLeave autocommand
splits window (after 9.1.0143).
Solution: Only close other windows if the buffer will be unloaded
(zeertzjq).
related: neovim/neovim#37749
closes: #19352
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Patch 9.0.1527 (related issue: vim/vim#12362) introduced range checking
for `term_cols` parameter of the various terminal related functions, but
did not update the documentation. This is the fix, hopefully I found
everything that mentions is. Also improve the style for `term_rows` to
match.
Code reference ( https://github.com/vim/vim/blob/master/src/job.c#L456 ):
if (opt->jo_term_cols < 0 || opt->jo_term_cols > 1000)
closes: #19346
Signed-off-by: Kalin Kozhuharov <kalin@thinrope.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
The translation file should not be included with Vims runtime files.
Translated help files should be made available via a separate project,
like what has been mentioned here:
https://www.vim.org/translations.php
related: #19321
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: search() is used to check for the message from tar that
indicates leading slashes found in the tar archive, or to
check for the leading slashes themselves. However, if
'nowrapscan' is in effect these searches are limited to the
last line and don't find any results. This causes the warning
message from tar to be seen in the buffer, the "Path Traversal
Attack Detected" message to be omitted, and editing actions
can fail. This can be seen, for example, when editing
src/testdir/samples/evil.tar.
Solution: Use the 'w' flag for search() (Kevin Goodsell)
closes: #19333
Signed-off-by: Kevin Goodsell <kevin-opensource@omegacrash.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Terminal doesn't handle split UTF-8 sequence after ASCII.
Solution: Only use one UTF-8 encoding state per vterm state (zeertzjq).
fixes: #16559closes: #18640
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Another case of buffer overflow with 'helpfile'.
Solution: Leave room for "tags" in the buffer (zeertzjq).
closes: #19340
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: buffer-overflow in 'helpfile' option handling by
using strcpy without bound checks (Rahul Hoysala)
Solution: Limit strncpy to the length of the buffer (MAXPATHL)
Github Advisory:
https://github.com/vim/vim/security/advisories/GHSA-5w93-4g67-mm43
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: Test_diff_screen() fails on BSD
Solution: Use gdiff on BSD systems if available (zeertzjq).
related: #19336
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Remove `--nonstopmode` because (a) ConTeXt always stops anyway, and (b)
`--nonstopmode` disables SyncTeX unconditionally. Add `--paranoid`,
which prevents the command to descend to `..` and `../..`.
Pass the typesetting command only the name of the input file rather than
its full path, as that is more compatible with ConTeXt's syncing
mechanism.
closes: #19323
Signed-off-by: Lifepillar <lifepillar@lifepillar.me>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Page scrolling in Insert mode beeps (after 9.1.0211).
Solution: Fix incorrect return value of pagescroll(). Also invert the
return value of scroll_with_sms() to be less confusing and
match comments (zeertzjq).
fixes: #19326closes: #19327
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: MS-Windows: font size calculation slightly wrong, causing
vertical line gaps (Maxim Kim, after v9.1.2127)
Solution: Update font size calculation when using DirectX
(Yasuhiro Matsumoto).
Use pre-calculated font ascent from font metrics instead of fixed
formula (h * 0.83) to calculate text baseline. This prevents vertical
text shift when font fallback occurs with CJK characters.
closes: #19318
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: heap UAF if autocommands from reloading a file changed outside
of Vim wipe its buffer.
Solution: Validate the bufref after buf_reload (Sean Dewar)
closes: #19317
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
When using vim9-syntax plugin, :VimKeywordPrg does not lookup functions
correctly, as it relies solely on syntax names to find the help topic.
The syntax keyword used for builtin function is vi9FuncNameBuiltin in
vim9-syntax plugin, not vimFuncName expected by :VimKeywordPrg, so the
fallback rules apply, and there is no fallback rule for function calls.
Fix by just checking if the first char after topic is '(', and if so
assume help topic is a function.
closes: #19320
Signed-off-by: Mark Woods <mwoods.online.ie@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Updated Swedish translation of the Vim tutor from version 1.5 to 1.7.
Added missing lessons:
- Lesson 1.1.5: TEXT EDITING - APPENDING
- Lesson 1.1.6: EDITING A FILE
- Lesson 1.1 SUMMARY
- Lesson 1.2.3: ON OPERATORS AND MOTIONS
- Lesson 1.2.4: USING A COUNT FOR A MOTION
- Lesson 1.2.5: USING A COUNT TO DELETE MORE
- Lesson 1.2 SUMMARY
- Lesson 1.3.2: THE REPLACE COMMAND
- Lesson 1.3 SUMMARY
- Lesson 1.5.3: SELECTING TEXT TO WRITE (visual mode)
- Lesson 1.6: OPEN, APPEND, REPLACE, COPY/PASTE, OPTIONS
- Lesson 1.7: ONLINE HELP
- Lesson 1.8: CREATE A STARTUP SCRIPT
- Lesson 1.9: CONCLUSION
Original Swedish translation by Johan Svedberg.
Updated by Daniel Nylander.
closes: #19321
Signed-off-by: Daniel Nylander <po@danielnylander.se>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Translated by Daniel Nylander.
Covers:
- Text objects (iw, aw, i[, a[, etc.)
- Named registers (a-z)
- Expression register (=)
- Numbered registers (0-9)
- Special registers (+, *, _, -)
- Marks and mark motions
related: #19321
Signed-off-by: Daniel Nylander <po@danielnylander.se>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Fix typo: paranteser -> parenteser (line 240)
- Fix h j k l navigation block being too wide
- Shorten Swedish text to fit proper column width
Closes feedback from PR #18849
related: #19321
Signed-off-by: Daniel Nylander <po@danielnylander.se>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: MS-Windows: DirectX renders font too small in comparison to
the GDI rendering (Linwei, after v9.1.2125)
Solution: Implement proper font clipping (Yasuhiro Matsumoto)
related: #19254
closes: #19304
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- fix indent of a closing } after another } on previous line
- fix indent of consequent #+feature lines
- highlight #+features
closes: #19310
Signed-off-by: Maxim Kim <habamax@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: vim --version used single column for feature list
(Ben Knoble, after v9.1.1898)
Solution: Restore old behaviour and assume 80 columns, making sure
the feature list is shown in several columns
(Ben Knoble, Hirohito Higashi).
fixes: #19309closes: #19315
Co-authored-by: D. Ben Knoble <ben.knoble+github@gmail.com>
Signed-off-by: Hirohito Higashi <h.east.727@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Describe the "height" argument when opening the quickfix window.
See: #19302 ("[cl]window" has different behaviour from "[cl]open" about
their argument [height])
related: #19302
closes: #19305
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: MS-Windows: DirectX rendering can be improved
Solution: Use lpDx advance, fix vertical text shift and correct
font-size calculations (Yasuhiro Matsumoto).
This changes DirectWrite rendering to:
- Respect lpDx-provided advance widths instead of always adjusting to
cell width.
- Use a fixed baseline derived from cell geometry to prevent vertical
shifts when font fallback occurs (e.g. with CJK characters).
- Correctly convert LOGFONT lfHeight to DirectWrite font size using font
metrics for closer GDI compatibility.
closes: #19254
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- fix readability issue with IncSearch/CurSearch
- add highlights to some of ftplugins distributed with vim
closes: #19295
Signed-off-by: Mao-Yining <mao.yining@outlook.com>
Signed-off-by: Maxim Kim <habamax@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: blob2str() does not handle UTF-16 encoding
(Hirohito Higashi)
Solution: Refactor the code and fix remaining issues, see below
(Yasuhiro Matsumoto).
blob2str() function did not properly handle UTF-16/UCS-2/UTF-32/UCS-4
encodings with endianness suffixes (e.g., utf-16le, utf-16be, ucs-2le).
The encoding name was canonicalized too aggressively, losing the
endianness information needed by iconv.
This change include few fixes:
- Preserve the raw encoding name with endianness suffix for iconv calls
- Normalize encoding names properly: "ucs2be" → "ucs-2be", "utf16le" →
"utf-16le"
- For multi-byte encodings (UTF-16/32, UCS-2/4), convert the entire blob
first, then split by newlines
convert_string() cannot handle UTF-16 because it uses string_convert()
which expects NUL-terminated strings. UTF-16 contains 0x00 bytes within
characters (e.g., "H" = 0x48 0x00), causing premature termination.
Therefore, for UTF-16/32 encodings, the fix uses string_convert_ext()
with an explicit input length to convert the entire blob at once.
The code appends two NUL bytes (ga_append(&blob_ga, NUL) twice) because
UTF-16 requires a 2-byte NUL terminator (0x00 0x00), not a single-byte
NUL.
- src/strings.c: Add from_encoding_raw to preserve endianness, special
handling for UTF-16/32 and UCS-2/4
- src/mbyte.c: Fix convert_setup_ext() to use == ENC_UNICODE instead of
& ENC_UNICODE. The bitwise AND was incorrectly treating UTF-16/UCS-2
(which have ENC_UNICODE + ENC_2BYTE etc.) as UTF-8, causing iconv
setup to be skipped.
fixes: #19198closes: #19246
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: using NOT with a float returns a float in legacy vim script
(kennypete)
Solution: Return a number instead of a float (Yegappan Lakshmanan)
fixes: #19282closes: #19289
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: Negating a float doesn't result in a boolean
(kennypete)
Solution: Make it return a boolean (Yegappan Lakshmanan).
related: #19282
related: #19289
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: type issue when modifying a variable using :legacy
(kennypete)
Solution: In a vim9 script, when modifying a variable using the legacy
command, check the type (Yegappan Lakshmanan).
fixes: #18531closes: #19292
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Use standard indent and remove unnecessary bang.
closes: #19285
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: Test_language_cmd fails on OpenBSD because the test
uses an invalid locale name and expects the command to produce
an error. OpenBSD accepts (almost) any locale name as valid by
design, so the :lang command succeeds and the test fails.
Solution: Slightly update the "bad" locale name to make it something
that OpenBSD considers invalid by adding a dot (but not ending
with ".UTF-8"). Maintain the original two underscores in the
name because that ensures Windows will also see it as invalid
(Kevin Goodsell).
closes: #19280
Signed-off-by: Kevin Goodsell <kevin-opensource@omegacrash.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: 'cursorline' and part of 'statusline' are missing after
:diffput to an empty buffer.
Solution: Make sure the cursor doesn't go beyond the last line after
:diffput (zeertzjq)
related: neovim/neovim#37621
closes: #19281
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: unnecessary braces in terminal.c
(Christ van Willegen, after v9.1.2113)
Solution: Remove braces
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: crash when using 'tagfunc' (Rodrigo Queipo)
Solution: Do not add the user_data to the 'info' dictionary when called
for insert mode completion (the TAG_INS_COMP flag is set).
Completion should not depend on the state of a previous tag
jump. (Yasuhiro Matsumoto)
fixes: #19255closes: #19284
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: modeless selection not copied to * register when P in
guioptions (Coacher)
Solution: Make the "P" flag override the "a" and "A" flag
(Foxe Chen)
fixes: #19187closes: #19244
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
This includes macros, keys etc. which were not highlighted before.
closes: #19276
Signed-off-by: Muntasir Mahmud <muntasir.joypurhat@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
indent/rust.vim behaves incorrectly when a string literal contains the
substring "if".
For example, in this code:
let x = "
motif
";
struct X {
}
indent/rust.vim thinks that the closing "}" should line up with "motif".
This patch fixes the issue by checking whether the "if" is in a string
literal or comment before considering it to be a match for a subsequent
brace (and also by requiring it to start on a word boundary).
Add an indent test to ensure this does not regress.
closes: #19265
Signed-off-by: taylor.fish <contact@taylor.fish>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: long statusline may crash if using singlebyte encoding
(fizz-is-on-the-way)
Solution: Drop the non-mbyte codepath and always use the mbyte code
(zeertzjq)
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Also add syntax tests for those newly constants.
closes: #17788closes: #18922
Signed-off-by: Rob B <github@0x7e.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Add "-" to iskeyword. This required a change to the syntax files too
because they were using the word begin and end atoms.
closes: #17259
Co-authored-by: Teemu Ikonen <tpikonen@mailbox.org>
Co-authored-by: A4-Tacks <wdsjxhno1001@163.com>
Signed-off-by: Aman Verma <amanraoverma@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: skhd files are not recognized
Solution: Detect .skhdrc and skhdrc as skhd filetype,
include a syntax and filetype plugin, add syntax tests
(Kiyoon Kim)
Add syntax highlighting for skhd (simple hotkey daemon for macOS)
configuration files. Includes filetype detection for skhdrc and
.skhdrc files.
Reference:
- https://github.com/asmvik/skhdcloses: #19235
Signed-off-by: Kiyoon Kim <kiyoon@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Several runtime files with "_utf-8" in their filename are actually encoded
in latin1 or cp1255, not UTF-8. This causes errors when tools attempt to
read these files as UTF-8.
Files converted:
- esperanto_utf-8.vim: latin1 -> UTF-8, updated scriptencoding directive
- greek_utf-8.vim: latin1 -> UTF-8
- hebrewp_utf-8.vim: cp1255 (Windows Hebrew) -> UTF-8
- menu_ca.utf-8.vim: latin1 -> UTF-8
- menu_ca_es.utf-8.vim: latin1 -> UTF-8
- menu_pt_pt.utf-8.vim: latin1 -> UTF-8
The actual functionality remains unchanged - only the encoding was modified.
closes: #16390
Signed-off-by: ThanhNguyxn <thanhnguyentuan2007@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Test_foldtextresult_rightleft() does not restore 'columns'
(after v9.1.2102)
Solution: Save and restore the value of 'columns' (zeertzjq).
related: #19220
closes: #19234
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: class, enum and type alias can be used as value in an
expression (kennypete)
Solution: Abort expression evaluation if class, enum or type alias is
used in an expression (Yegappan Lakshmanan)
related: #19173
closes: #19238
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Not enough tests for using plain_vgetc().
Solution: Add tests for using plain_vgetc() during various commands.
(zeertzjq)
closes: #19236
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Allow for an unparenthesised expression argument to the 'if',
'if-then', and 'while' commands. This is undocumented, and probably
unintended, behaviour but is frequently seen in the wild.
- Allow for a continued-line expression argument to the 'if-then'
command.
related: #19172 (csh: Support negated if in matchit)
closes: #19190
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: readdirex() might be slow (Mao-Yining)
Solution: Avoid double slash in path concatenation in
create_readdirex_item() (Yasuhiro Matsumoto)
On Cygwin and MSYS2, // has a special meaning: it is treated as a prefix
for accessing network computers.
For example, //wsl$/ is used to access WSL.
In the current Vim implementation, the directory path passed to
readdirex() and the file name found during traversal are concatenated
using "/".
When the directory path already ends with /, this results in paths like:
"/" + "/" + "$Recycle.Bin"
which produces a //-prefixed path. Such paths are interpreted as network
paths, so Vim ends up trying to retrieve the file size of a network
computer named $Recycle.Bin, which is not intended.
From a correctness perspective on Windows, file size retrieval should be
skipped for paths of the following forms:
//host
//host/share
However, as a first step, we should avoid generating // paths caused by
redundant / concatenation in the first place.
This change addresses this by preventing unnecessary / insertion when
constructing paths.
fixes: #19188closes: #19241
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: test_fold.vim leaves swapfiles behind
Solution: Close open buffer using :bw! instead of :close!
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: foldtext not reversed and cut off in 'rightleft' mode
(bfredl)
Solution: Fix the rightleft redrawing logic (Sergey Vlasov)
fixes: #2659closes: #19220
Signed-off-by: Sergey Vlasov <sergey@vlasov.me>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When checking a .po file (make -C src/po check), errors are not
displayed.
Solution: Adding "silent" to some normal commands in check.vim
suppresses unnecessary output (Muraoka Taro)
This is because the output of check.vim is redirected to /dev/null.
However, if you stop the redirection, check.vim generates a lot of
output and becomes very slow.
When these commands are run in ex mode, they output the contents of the
line the cursor is pointing to. This caused a lot of output.
closes: #19227
Signed-off-by: Muraoka Taro <koron.kaoriya@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Changes to debcontrol:
- Only use debcontrolEmail for Maintainer/Uploaders
- Add Build-Driver to debcontrolField
- Add Protected to debcontrolStrictField
- Remove Uploaders from the more generic region
- Add explicit support for highlighting build profiles
- Add explicit support for highlighting architecture specifications
- Fix URL for sections.822
Changes to debversions:
- Move plucky to unsupported
closes: #19228
Signed-off-by: James McCoy <jamessan@debian.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: more truthiness issues
(kennypete)
Solution: Class, enum and typealias cannot be used with the falsy
operator (Yegappan Lakshmanan)
related: #19213
fixes: #19173
closes: #19216
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Depending on the worker's environment, the line endings in
ja.sjis.po may differ from those in the source ja.po.
Solution: By setting standard input and output to binary mode, the line
endings for input and output will match (Muraoka Taro)
This occurs when using MINGW gcc on Windows and git with autocrlf=false.
In this case, the line endings in ja.po are LF, but because sjiscorr
compiled with MINGW gcc uses text mode for standard input and output,
the line endings in the output ja.sjis.po will be CRLF.
This mismatch in line endings confuses git, causing large differences to
occur when updating.
In addition, the comment style has been changed to // to match the rest
of Vim's code.
closes: #19226
Signed-off-by: Muraoka Taro <koron.kaoriya@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When using netrw to navigate directories, vim immediately
creates, then deletes a swap file in the entered directory,
causing the lastModifiedTime of that directory to change.
Solution: Use the :noswapfile command modifier in s:NetrwEditFile()
fixes: #18854
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Crash with 'wildmenu' when typing Ctrl-Y after Ctrl-A
(after 9.1.1714) (fizz-is-on-the-way).
Solution: Check if there are matches before applying one (zeertzjq).
closes: #19210
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: TabClosedPre may be triggered twice for the same tab page when
closing another tab page in BufWinLeave (after 9.1.1211).
Solution: Store whether TabClosedPre was triggered in tabpage_T
(zeertzjq).
Also fix the inconsistency that :tabclose! triggers TabClosedPre after
a failed :tabclose, but :close! doesn't even if there is only one window
in the tab page.
closes: #19211
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: :wqall! doesn't quit when using :quit in BufWritePost
(after 8.0.1190).
Solution: Restore old value of "exiting" when calling not_exiting()
instead of always resetting it to FALSE (zeertzjq).
related: #2205
closes: #19212
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
I've updated the Japanese translation for the Vim 9.2 release. The
content contained in this PR was created collaboratively by multiple
peoples in the vim-jp/lang-ja project, and I, koron (Muraoka Taro), am
submitting it as the project representative.
The PR used for this work is https://github.com/vim-jp/lang-ja/pull/171.
(Please note that the communication in this PR is in Japanese)
closes: #19215
Signed-off-by: Muraoka Taro <koron.kaoriya@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: heap-use-after-free when wiping buffer in TabClosedPre.
Solution: Check window_layout_locked() when closing window(s) in another
tabpage (zeertzjq).
closes: #19196
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: There is an unavailable "Sponsor/Register" item in the Help
menu.
Solution: The item name has been unified to "Sponsor".
The item names of tlmenu, which are only valid in terminal mode, were
not updated, so unnecessary items that were unavailable were displayed.
This item is also very confusing when creating menu translations.
In addition, the indentation of an item with the same name in the
regular menu has been corrected.
closes: #19201
Signed-off-by: MURAOKA Taro <koron.kaoriya@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Ruby headers define HAVE_FSYNC, which leaks into Vim sources
on Windows and changes conditional compilation of buf_T. This
causes struct layout mismatches in if_ruby.c and results in a
different offset for the b_p_bl property, making Vim::Buffer
access fail (after v9.1.2024)
Solution: Undefine HAVE_FSYNC after including the Ruby headers.
related: #19019
closes: #19206
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Last buffer not freed with EXITFREE (after 9.1.2087).
Solution: Free the last buffer when inside free_all_mem()
(zeertzjq).
This isn't really a memory leak, as the last buffer's memory is still
reachable via pointers like firstbuf and lastbuf. But it's possible that
this may cause false ASAN warnings in the future, which is what EXITFREE
is supposed to prevent.
closes: #19194
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: sh_10 fails on MacOS runners (after 16c2279062)
because dash does not exist on MacOS
Solution: Force the test to use bash shebang line
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Wayland: Clipboard not working with external programs on
Wayland (devsnek)
Solution: Simplify the Wayland offer logic and drop offering the special
mime type (Foxe Chen)
fixes: #19050closes: #19184
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Redundant NULL checks in find_pattern_in_path().
Solution: Remove the NULL checks. Also fix typos in test_diffmode.vim
(zeertzjq).
After assigning to inc_opt on line 3461, it's dereferenced immediately,
and not assigned another value afterwards, so checking for NULL after
line 3462 is redundant.
closes: #19185
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Crash when using :tabonly in BufUnload.
Solution: Set curbuf when setting curwin->w_buffer. Don't wipe out a
buffer if there are no other buffers. Don't decrement
b_nwindows if it was 0 before buf_freeall() (zeertzjq).
fixes: #19088#issuecomment-3710172769
closes: #19186
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Add links to the example page at cppreference.com used for these tests
as per their licensing requirements.
closes: #19192
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Currently, the matchit configuration chokes on valid syntax like:
```csh
if !(true) then
true
endif
```
Make sure the negation syntax is supported.
closes: #19172
Signed-off-by: Simão Afonso <simao.afonso@powertools-tech.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: memory leak when not evaluating (just parsing) invalid literal
dict.
Solution: Always clear the key's typval (Sean Dewar)
Though "check_typval_is_value(&tv) == FAIL && !evaluate" is maybe never
true, also always clear tvs if check_typval_is_value fails; at worst
this would be a no-op as their initial types are VAR_UNKNOWN.
closes: #19178
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: The indentation of Ansible Playbooks gets messed up after
gg=G (after 9179ddc060)
Solution: Remove one shiftwidth() that seems to be misplaced.
closes: #19180
Signed-off-by: Bjoern Foersterling <bjoern.foersterling@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Use-after-free in winframe_remove() (henices)
Solution: Set window_layout_locked() inside winframe_remove()
and check that writing diff files is disallowed when the
window layout is locked.
It can happen with a custom diff expression when removing a window:
1. Buffer was removed, so win_frame_remove() is called to remove the
window.
2. win_frame_remove() → frame_new_height() → scroll_to_fraction()
→ diff_check_fill() (checks for filler lines)
3. diff_check_fill() ends up causing a diff_try_update, and because we
are not using internal diff, it has to first write the file to a
buffer using buf_write()
4. buf_write() is called for a buffer that is not contained within a
window, so it first calls aucmd_prepbuf() to create a new temporary
window before writing the buffer and then later calls
aucmd_restbuf(), which restores the previous window layout, calling
winframe_remove() again, which will free the window/frame structure,
eventually freeing stuff that will still be accessed at step 2.
closes: #19064
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: modeless auto-select not working
(Coacher)
Solution: Add support for modeless autoselect
(Foxe Chen)
fixes: #19159closes: #19168
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: MS-Windows: "#ifdef FEAT_GUI" exists within "ifdef
FEAT_GUI_MSWIN", which is confusing when reading the code.
FEAT_GUI is always defined if FEAT_GUI_MSWIN is defined (see
vim.h). Therefore, this check and the else block are
unnecessary.
Solution: Removed unnecessary "#ifdef FEAT_GUI" (Muraoka Taro).
closes: #19164
Signed-off-by: Muraoka Taro <koron.kaoriya@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: A few more typos in various files
Solution: Fix those (zeertzjq, antonkesy)
related: neovim/neovim#37348
closes: #19153
Co-authored-by: Anton Kesy <anton@kesy.de>
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Add .rst to suffixesadd. This allows gf and similar commands to work for
rst documentation such as in the linux kernel Documentation.
closes: #19149
Signed-off-by: Anakin Childerhose <anakin@childerhose.ca>
Signed-off-by: Christian Brabandt <cb@256bit.org>
This update is meant to be included in the upcoming 9.2 release.
**New**
- Support ConTeXt's convention to optionally specify an output directory
in a comment line at the beginning of a source file.
- If a log file is not found, Vim does not create a new buffer.
- Removed `syntax/shared` files for the following reasons:
- they are not necessary for the plugin to work (they only improve
over existing syntax highlighting);
- they are relative large;
- they can be automatically (re)generated by users at any time using
ConTeXt (explained in the doc);
- since ConTeXt is updated frequently, they quickly become obsolete.
**Minor**
- Prefer `var` to `const` inside functions.
- Prefer `$`-interpolation to `printf()`.
- All revision dates set to the same date for consistency.
- Updated the error format.
- Various tweaks to the documentation, but nothing disruptive or new.
closes: #19148
Signed-off-by: Lifepillar <lifepillar@lifepillar.me>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: The :help command lacks command termination tests.
Solution: Add tests for command termination at "|", "^M" and "^J".
- Check special handling of "|" in arguments.
- Update the Vim syntax file.
closes: #18932
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: The behavior of vim.eval() with Vim special variables is not
clearly documented. It is (partly) the reason why Nvim
Python's vim.eval gives different output when evaluating
v:true and v:false
Solution: Document it (Phạm Bình An)
closes: #19157
Signed-off-by: Phạm Bình An <phambinhanctb2004@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: type issue when appending item to a list
(Peter Kenny)
Solution: When adding a new item at the end of a list in vim9script, use
the proper item type (Yegappan Lakshmanan)
fixes: #19045closes: #19076
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: When running the MinGW test, an error occurs after
generating opt_test.vim.
Solution: Rewrite the error detection in cmd.exe syntax (Muraoka Taro).
The recipe section of src/testdir/Make_ming.mak must be written in
cmd.exe syntax. This is because "SHELL = cmd.exe" is specified at the
beginning. However, the error detection in the opt_test.vim recipe is
written in UNXI syntax, which caused the error.
closes: #19146
Signed-off-by: Muraoka Taro <koron.kaoriya@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Only set fileformat=dos for new files; preserve existing line endings
when editing. This satisfies RFC 5228 for new files while avoiding
issues with version control and existing workflows.
The previous change (3cb4148) unconditionally set fileformat=dos, which
converts existing files with LF line endings to CRLF on save. This
causes issues with version control (entire file appears changed) and
breaks workflows where sieve files are stored with unix line endings.
Dovecot Pigeonhole (the main sieve implementation) has explicitly
accepted LF line endings since 2008 (commit 97b967b5):
/* Loose LF is allowed (non-standard) and converted to CRLF */
This behavior has remained unchanged for almost 18 years.
closes: #19144
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Signed-off-by: André-Patrick Bubel <code@apb.name>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: auto/configure needs to be regenerated
(after v9.1.2072)
Solution: Run make autoconf and update the configure script
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Socket server has some small issues
Solution: Fix issues (see below)
- don't poll current vim instance when using serverlist()
- list the current vim instance in serverlist() (to match X11
behaviour)
- don't make X11 feature disable socketserver feature
- refactor CheckSocketServer logic and update tests with remote server
dependency
closes: #19118
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When "util/shared.vim" is sourced and GetVimCommand is called on
behalf of the syntax test runner, the "vimcmd" file will be searched
in the current working directory, i.e. "src/testdir", whereas the
desired file is in "runtime/syntax/testdir".
Solution: Temporarily copy "vimcmd" between test directories.
closes: #19127
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: test_ins_complete.vim leaves swapfiles behind
Solution: Close open buffers using :bw! instead of :close!
closes: #19137
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: when shortmess doesn't have 'S', backward search wrap doesn't
show the "W" before count. forward search works fine but
backward fails because the position check logic is backwards -
it checks if cursor < pos instead of using the existing
wrapped flag.
Solution: Use sia->sa_wrapped flag that searchit() already sets
correctly (glepnir).
fixes: #5280closes: #19138
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: :bdelete/bunload/bwipeout may attempt to switch to a closing
buffer, which fails. (after 9.1.2058)
Solution: don't consider switching to closing buffers (Sean Dewar)
closes: #19107
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
This brings us to upstream commit f251a43 (Merge syntax based folding
for block comments, 2025-09-10). Note that not all upstream files are
included.
closes: #19126
Signed-off-by: D. Ben Knoble <ben.knoble+github@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When building GvimExt with MinGW, some DLLs are still linked
even if STATIC_STDCPLUS=yes is set.
Solution: Following the Vim core, make some libraries explicitly
statically linked. The order of libraries is important, and
gcc_eh must be placed before winpthread (Muraoka Taro)
closes: #19131
Signed-off-by: Muraoka Taro <koron.kaoriya@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
When a list item contains a mapping key (e.g., '- element1:'), the
content under that key was incorrectly indented. The indent function
was not accounting for the '- ' prefix when calculating indentation
for nested content.
Example that now works correctly:
list:
- element1:
foo: bar # Now correctly at indent 6, not 4
The fix adds special handling in two places:
1. When previous line ends with ':' and starts with '- '
2. When looking up previous mapping key that is a list item
Fixes indentation to account for the 2-character '- ' prefix.
fixes: #18943closes: #19133
Signed-off-by: Cezar Dimoiu <cezar.dimoiu@keysight.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
This change does 2 things:
1) Mark src/testdir/test21.ok as binary by git.
After 0ed8ba3079, test21.ok was treated by Git as a text file
using LF line endings. However, the test explicitly checks handling of
files with mixed line endings, so it must retain its literal LF and CR
endings and must not be modified by Git. Therefore, mark it explicitly
as binary.
2) Remove src/testdir/test42.in
This test was converted to the new-style test in v8.2.1316 and was
therefore deleted. There is no need to keep gitattributes rules for a
non-existing file.
related: #19086
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem:
- When I type `:h termdebug`, I will expect to see the introduction of
the termdebug plugin. But instead, it shows me document of
`termdebug_wide`, and I have to scroll up quite much to find the
introduction.
- `:h popup` says `floating-window`? Why? As I have tried both features
(of Vim and Neovim), I think they are _very different_ things, even
more different than job features in Vim and Neovim.
Solution:
- In `:h terminal.txt`, add tag `*termdebug*` to the introduction of
termdebug plugin.
- In `:h popup.txt`, "floating window" -> "popup window".
closes: #19135
Signed-off-by: Phạm Bình An <phambinhanctb2004@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: A few typos in the code and runtime files
Solution: Fix those (zeertzjq).
closes: #19119
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: b_locked_split is not checked for :sbuffer, which allows
autocommands to leave windows open to freed buffers.
Solution: In do_buffer_ext, check just before possibly splitting, after
handling 'switchbuf'. Leave win_split to handle the check for
curbuf. (needed even if curbuf is not the target, as setting
the buffer after splitting may fail) (Sean Dewar)
closes: #19096
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Copying to clipboard register broken with 'go-P'
(Coacher)
Solution: Verify that clip_plus is available (Foxe Chen).
fixes: #19072closes: #19097
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: inconsistent indent and line breaking in Test_maparg().
Solution: Consistently use spaces-only indent. Reorder fields to group
similar ones together and break lines at consistent positions.
Remove a mapping when it is no longer used (zeertzjq).
closes: #19099
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Division by zero in :file after failing to wipe buffer
(after 8.2.4631).
Solution: Still call buf_clear_file() when failing to wipe buffer
(zeertzjq).
closes: #19088
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When running tests on a source tree checked out with git for
Windows, the old tests fail.
The Git for Windows installer installs git with core.autocrlf=true by
default. If you check out, build, and run tests using such a git, the
old test .ok files will likely fail because they use CRLF line endings.
Tests on Windows assume that .ok files use LF line endings, and
appropriately convert the line endings of related files. This
assumption breaks down when .ok files use CRLF.
Solution: Force LF line endings for old test .ok files in the
.gitattributes file. Related to that, we've stopped explicitly
specifying line endings when checking out in CI, since this is no longer
necessary.
While at it, also fix a typo in the comment of the gitattributes file.
closes: #19086
Signed-off-by: Muraoka Taro <koron.kaoriya@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
This commit updates `syntax/cangjie.vim` to match the latest `std.core`
library:
New Features:
* Documentation: Added highlighting for documentation keywords (e.g., `@param`, `@return`).
* Standard Library: Added highlighting for `std.core` functions, interfaces, and classes.
* Exceptions: Added highlighting for standard exception types.
* FFI Support: Added highlighting for C interoperability types (e.g., `CPointer`).
Improvements:
* Configuration: Added a unified switch (`s:enabled('builtin')`) for standard library highlighting.
* Type System: Updated `Int` and `UInt` aliases.
* Interpolation: Enabled standard library highlighting inside string interpolation.
* Cleanup: Removed non-core types like `ArrayList` and `HashMap`.
closes: #19085
Signed-off-by: Neila <wu.junkai@qq.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Can't unpack tuple from imported function
(Mao-Yining)
Solution: Support multi-variable assignment from a tuple returned by an
imported function (Yegappan Lakshmanan)
fixes: #19080closes: #19083
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: If another find.exe derived from findutils is installed on
Windows, unintended behavior will occur. If MSYS2 is installed and
prioritized over the system path, then find.exe derived from
findutils will be launched during build, resulting in an
unintended warning message.
Solution: Specify the absolute path including SYSTEMROOT to launch
find.exe (Muraoka Taro)
closes: #19081
Signed-off-by: Muraoka Taro <koron.kaoriya@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Compile error when disabling linebreak feature
Solution: Adjust ifdefs (Matthias Rader)
When compiling with all features except for linebreak, there were some
compiler errors. By slightly modifying some preprocessor conditions,
compiling without the linebreak feature should work as expected.
closes: #19068
Signed-off-by: Matthias Rader <matthias.rader@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Test_cd_completion test fails in Appveyor. In Appveyor, a path
containing spaces was selected as the test target. But the
comparison failed because spaces were not taken into account
(after v9.1.2050)
Solution: Escape spaces in paths for comparison (Muraoka Taro)
closes: #19087
Signed-off-by: Muraoka Taro <koron.kaoriya@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: Test_cd_completion() may fail depending on the contents
of the root directory of the current drive on Windows.
readdir() may return a directory that cannot "cd" to, causing
this test to fail. An example of such a directory is
"System Volume Information" which only admin can "cd" to.
Solution: When determining the directory to use for testing, use the
directory that we actually "cd" to successfully.
In addition, directories with '$' in their names are also
excluded, as they are considered environment variables during
completion and do not work as expected.
Example: "$RECYCLE.BIN" (Muraoka Taro).
closes: #19078
Signed-off-by: Muraoka Taro <koron.kaoriya@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Pressing backspace in ConPTY on Windows deletes an entire
word, not just a single character. This is the same as
pressing Alt + backspace in cmd.exe.
Solution: When using ConPTY on Windows, the `VTERM_KEY_BACKSPACE` key is
now sent when the Backspace key or Ctrl+H is detected.
(Muraoka Taro)
Historically, Windows has assigned the code 0x7F (DEL) to backspace, and
it seems necessary to follow that behavior when using ConPTY.
closes: #19065
Signed-off-by: Muraoka Taro <koron.kaoriya@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Add documentation notes explaining that visual marks '< and '> have
different behaviors in getpos() and setpos().
Also fix a small typo.
closes: #19070
Signed-off-by: Larson, Eric <numeric.larson@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Current CI Windows testing does not test Vim using ConPTY.
Solution: Added a configuration to enable ConPTY to the Windows matrix.
This configuration suppresses the installation of winpty,
allowing testing with ConPTY.
Since the fixes made at the end of last year, all tests now pass when
using ConPTY, just like when using winpty. ConPTY itself is stable on
recent versions of Windows, so there are no longer any reasons not to
test it.
closes: #19066
Signed-off-by: Muraoka Taro <koron.kaoriya@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Mac: Build failure with Mac OS X 10.6
(Sergey Fedorov, after: v9.1.1748)
Solution: Add ifdefs MAC_OS_X_VERSION_10_7 around the code that sets the
scheduler priority.
fixes: #19044
related: #18120
closes: #19054
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Inefficient use of ga_concat()
Solution: Use ga_concat_len() when the length is already known to avoid
use of strlen() (John Marriott).
Additionally the following changes are done:
os_unix.c:
- in function `socket_server_list_sockets()` use a `string_T` for the
strings `buf` and `path` for use in `ga_concat_len()`
and drop un-needed variable `dir`.
quickfix.c:
- in function `qf_jump_print_msg()` use a `string_T` for the string
`IObuff` for use in `ga_concat_len()`.
- in function `qf_range_text()` use a `string_T` for the string `buf`
for use in `ga_concat_len()`.
register.c:
- simplify function `execreg_line_continuation()`.
terminal.c:
- in function `read_dump_file()` use a `string_T` for the
string `prev_char` for use in `ga_concat_len()`.
tuple.c:
- in function `tuple_join_inner()` use a `string_T` for the
string `s` for use in `ga_concat_len()`. Also, change local struct
`join_T` to use `string_T`.
vim9type.c:
- in functions `type_name_tuple()` and `type_name_func()`
use a `string_T` for the string `arg_type` for use in
`ga_concat_len()`.
closes: #19038
Signed-off-by: John Marriott <basilisk@internode.on.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: test_menu.vim leaves swapfiles behind
Solution: Close open buffers using :bw! instead of :close!
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: :tlnumenu incorrectly accepts a range.
Solution: Remove EX_RANGE and EX_ZEROR from the command definition and
use ADDR_NONE (Doug Kearns).
closes: #19055
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: if_ruby: crash when using Ruby/dyn 4.0
(after v9.1.2036)
Solution: Fix Ruby 4.0 dynamic builds correctly by inlining
rb_check_typeddata (Yee Cheng Chin)
Ruby 4.0 broke Vim compilation in dynamic builds. That's because the
function `rb_check_typeddata` is now used in an inline function defined
in Ruby headers, which causes it to link against the lib statically
rather than using the one we load in dynamically
(`dll_rb_check_typeddata`) as we only remap it later (after the Ruby
header include).
A previous fix (v9.1.2036) did a wrong fix by stubbing in the actual
inline function `rbimpl_check_typeddata` instead. This does not work
because the inline function is not part of the dynamic lib and therefore
it's not possible to load it in dynamically (the patch also did not
actually attempt to load in the stub). With that patch, Vim would
crash when this function is used as the function pointer is null.
Fix this properly by reverting the previous change, and simply stub
`rb_check_typeddata` using similar mechanisms the file had already set
up for similar situations.
fixes: #18884
related: #19051
closes: #19060
Signed-off-by: Yee Cheng Chin <ychin.git@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: test_marks.vim leaves swapfiles behind
Solution: Close open buffers using :bw! instead of :close!
closes: #19061
Signed-off-by: Christian Brabandt <cb@256bit.org>
This reverts commits:
- 6b652a7850
- 2f689d5abd
- a025a46d41
Several email addresses that are known to be valid caused bounces
due to an issue with my email setup. The previous commits incorrectly
marked these addresses as invalid. So revert the whole thing again.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: undo: cursor position not correctly restored
Solution: Do not override the saved cursor position (altermo)
closes: #19052
Signed-off-by: altermo <107814000+altermo@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: Test_terminal_cwd in test_terminal.vim fails flaky
in the Windows ConPTY terminal.
Solution: In ConPTY, the timeout is extended to 1msec when reading a
channel associated with a job that is about to finish. This
allows Vim to read the last output of a process in a pseudo
console. Add comments to make the reasoning clear.
(Muraoka Taro)
Processes that terminate too quickly in the ConPTY terminal cause Vim to
miss their final output.
In my environment, the probability of the "cmd /D /c cd" used in
Test_terminal_cwd occurring is about 1/4. For a simple statically
linked Hello World, the probability of it occurring is about 3/4.
closes: #19036
Signed-off-by: Muraoka Taro <koron.kaoriya@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: error when using class member in Lambda
Solution: Compare against uf_defclass variable
(Foxe Chen)
closes: #19041
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Makefile: cannot run make installinks twice
Solution: Change "ln -s" to "ln -sf" to force creation of the symlinks
(Thomas Petazzoni)
Running "make installlinks" twice towards the same destination
directory will fail, as symlink will already exist. This is not really
expected as "make install" is normally expected to work again and
again towards the same destination directory.
Fix this by using ln -sf.
closes: #19035
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: inefficient use of ga_concat()
Solution: Use ga_concat_len() when length is known.
(John Marriott)
closes: #19027
Signed-off-by: John Marriott <basilisk@internode.on.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: the test_vim9_class.vim testfile is too long
Solution: Split out the interface related test cases into a new
test file test_vim9_interface.vim (Yegappan Lakshmanan)
closes: #19032
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Buffer overflow in buf_write() when converting incomplete
multi-byte characters (Kevin Goodsell)
Solution: Make the buffer slightly larger
closes: #19007
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: No indention support when editing bpftrace files.
Solution: Add indention settings based on cindent with custom options.
closes: #19030
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: bicep filetype used for 2 bicep file types
Solution: Detect *.bicepparam files as bicep-param filetype, include
new bicep-params and bicep filetype plugin
(Scott McKendry)
The bicep language server handles parameter files differently than
regular bicep files. Treating them the same at the editor level leads to
false positive diagnostics in the editor.
References:
Bicep Language Constants:
- 51392d32ca/src/Bicep.Core/LanguageConstants.cs (L23)
VS Code Extension definition:
- 51392d32ca/src/vscode-bicep/package.json (L47)closes: #19026
Signed-off-by: Scott McKendry <me@scottmckendry.tech>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Conpty terminal process may not start.
Solution: Do not close the input handle at EOF when conpty is in use.
(Muraoka Taro)
It causes the following tests to fail in Windows conpty:
- Test_terminal_duplicate_eof_arg()
- Test_terminal_eof_arg()
- Test_terminal_eof_arg_win32_ctrl_z()
To be precise, the process is launched, but immediately after it is
launched, the input handle to the console is closed with the EOF of the
input, and the console is terminated. When the console is terminated,
the associated process is also terminated.
In the Windows pseudo console, input and output handles are closed after
the process in the console has terminated. This is not explicitly
stated in Microsoft's documentation. However, looking at the code for
Windows Terminal, which is presented as a complete example of the pseudo
console, it is implemented exactly this way.
See the sample codes below:
- https://github.com/microsoft/terminal/blob/main/samples/ConPTY/EchoCon/EchoCon/EchoCon.cpp
- https://github.com/microsoft/terminal/blob/main/samples/ConPTY/GUIConsole/GUIConsole.ConPTY/Terminal.cs
- https://github.com/microsoft/terminal/blob/main/samples/ConPTY/MiniTerm/MiniTerm/Terminal.cs
The handle that is not closed at EOF is closed when Vim detects the end
of the job, so there is no risk of them being forgotten and leaking.
`ch_anonymous_pipe`, which was used to determine whether a channel was
for conpty, was set to TRUE only when conpty was being used. The
definition also had the comment `// ConPTY` attached to it. This name
is not very appropriate, but I felt it would be rude to add a new field
to `channel_T` just for this purpose, so I reused it.
closes: #19025
Signed-off-by: Muraoka Taro <koron.kaoriya@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: 'fsync' option cannot be set per buffer
Solution: Make 'fsync' option global-local
(glepnir)
closes: #19019
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: A BufAdd autocommand may cause alist_add() to use freed
memory, this is caused by the w_locked variable unset too
early (henices)
Solution: in trigger_undo_ftplugin() only set w_locked to false, if it
was false when calling the function.
related: v9.1.0678
closes: #19023
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: A recent commit introduced a member variable named `class` in
the `exarg` structure, which conflicts with the C++ keyword
`class`. This causes compilation issues on Windows when VIM
is compiled with OLE enabled, as "if_ole.cpp" cannot compile
due to the keyword conflict (after v9.1.2012).
Solution: Rename the member variable of `exarg` from `class` to `ea_class`.
(Wei Tang)
related: #18949
closes: #19016
Signed-off-by: Wei Tang <gauchyler@uestc.edu.cn>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When Vim is launched with a UNC directory, netrw treats it as a
relative path and compose it again.
Solution: This is due to `exists("g:netrw_cygwin")` always being true.
We can directly use `g:netrw_cygwin`.
closes: #19015
Signed-off-by: tao <2471314@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
vim9 conditions only admit 0 or 1 integers, however the return value of
shells is not limited to either 0 or 1 (e.g. powershell)
closes: #19010
Signed-off-by: Miguel Barro <miguel.barro@live.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: test_virtualedit.vim leaves swapfiles behind
Solution: Close open buffers using :bw! instead of :close!
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When virtualedit is set to all, the cursor is supposed to be
permitted to reside anywhere, including on the virtual space
beyond the end of the buffer's text. Switching modes triggered
a routine that "fixed" a cursor that was past the end of the
line by shifting it back to the last actual character in the
line and compensating with a virtual column offset. While
visually identical, this re-encoding changed the underlying
byte index, causing position-reporting functions to return
inconsistent values after a mode change.
Solution: Skip this coordinate adjustment when virtual editing is fully
enabled. By treating the line terminator as a valid, stable
position, the cursor’s internal representation remains
unchanged when entering or exiting Visual mode, ensuring
consistent coordinate reporting. Add a regression test to
check this functionality.
(McAuley Penney)
fixes: #16276closes: #19009
Signed-off-by: McAuley Penney <jacobmpenney@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- If g:osc52_disable_paste is enabled, then return an empty list instead
of a list with a single empty string.
- use `echo` instead of `echom` when printing osc waiting message
closes: #19002
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Makefile syntax highlighting incorrectly ends function calls
when encountering ')' inside double or single quoted strings,
causing incorrect highlighting for the remainder of the line.
Solution: Add makeDString and makeSString to the contains list for
makeIdent regions. This allows strings to be recognized inside
variable references and function calls.
fixes: #18687closes: #18818
Signed-off-by: Beleswar Prasad Padhi <beleswarprasad@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Partially revert 2a33b499a3, where all
syn match makeIdent are moved before syn region makeIdent to match $()
(reason: see https://github.com/vim/vim/pull/18403#issuecomment-3341161566)
However this results in https://github.com/vim/vim/issues/18890 ,
because lines like
`$(a) =`
will first start a region search beginning with `$(`
but then the whole target including `)` will be matched by
`syn match makeIdent "^ *[^:#= \t]*\s*="me=e-1`
which leaves the region search for the never-found `)` and let the
region matching overflow.
Same for
`$(a) ::`
`$(a) +=`
The solution is to move those greedy target match back, so they take
priority and prevents region match from happening.
fixes: #18890closes: #18938
Signed-off-by: Yiyang Wu <xgreenlandforwyy@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: getregionpos() depends on 'linebreak' setting
Solution: Reset linebreak setting temporarily (McAuley Penney)
When a line is wrapped on word boundaries, getregionpos() may report a
different end column for a visual block than the cursor position used to
define the selection.
Update the blockwise calculation in getregionpos() to use the same
wrapping assumptions as visual block mode, so the reported region
matches the selection boundaries.
Add a regression test that forces wrapping and checks that the end
position stays consistent under "setlocal wrap" and "setlocal
linebreak".
closes: #19006
Signed-off-by: McAuley Penney <jacobmpenney@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: At "if(0) do if(0); while(0); else", else should be aligned
with outer if, but is aligned with inner if.
Solution: In function find_match, ignore "if" and "else" inside a
do-while loop, when looking for "if". (Anttoni Erkkilä)
closes: #19004
Signed-off-by: Anttoni Erkkilä <anttoni.erkkila@protonmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: blob2string() stopped after an empty line
Solution: Specifically check for empty content (Foxe Chen)
closes: #19001
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: When opening a conpty terminal, if process startup
fails, it will silently exit. As a result, the
Test_terminal_shell_option in test_terminal3.vim failed in
conpty.
In a winpty terminal, the winpty-provided error message
"CreateProcess failed" was displayed. The test is designed to
catch this error as an exception.
Solution: Make conpty fail with an error messages in the same way as winpty.
(Muraoka Taro)
In addition, since the GetWin32Error() function can obtain more detailed
error messages, the format has been changed to "CreateProcess failed:
{localized message from the OS}" for conpty.
Also, since the GetWin32Error() function returns errors in ACP (Active
Code Page) encoding, these have been converted to Vim's internal
encoding, enc. This will prevent messages from being garbled in
Japanese environments, etc. The output of this function was basically
used by the semsg() function in other places, so this change also fixes
potential similar garbled characters.
The test now errors out immediately in places where it is expected not
to be reached, and comments have been added about the expected content
of the winpty and conpty error messages.
closes: #18998
Signed-off-by: Muraoka Taro <koron.kaoriya@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: cannot initialize class member with protected var
Solution: Allow this to work if this happens within the same class
(Foxe Chen)
closes: #18949
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Comment formatting does not work by default for bpftrace.
Solution: Change default 'formatoptions' similarly as C and many other
languages.
closes: #18996
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: crash when unreferencing gtk icon theme
(noamhalevy-wq, after v9.1.1583)
Solution: Remove the g_object_unref() call.
gtk_icon_theme_get_default() returns a singleton that should NOT be
unreferenced. From GTK documentation:
> A unique GtkIconTheme associated with the default screen. This icon
theme is associated with the screen and can be used as long as the
screen is open. Do not ref or unref it.
fixes: #18997
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: No syntax highlighting for bpftrace files.
Solution: Add basic syntax rules, which cover comments, keywords, strings,
numbers, macros and probes (the bpftrace specific items).
closes: #18999
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: "Xm4" test directory may not be deleted
Solution: Use "R" flag with mkdir() call to have the directory
recursively deleted at the end of function Test_m4_format()
(Muraoka Taro)
Test_m4_format in test_filetype.vim creates the "Xm4" directory with the
'D' flag. Then it creates two files in the "Xm4" directory. One of them,
"alocal.m4," was created with the 'D' flag, so it will disappear after
the test is complete. However, the other, "configure.ac," was created
without any flags, so it will remain even after the test is complete.
Because the parent directory "Xm4" was created with the 'D' flag, the
latter "configure.ac" remains and is not empty, so it will not be
deleted.
This forces the directory to be deleted regardless of its contents. As a
result, the two files "alocal.m4" and "configure.ac" created in the
directory are no longer needed, so they have been deleted.
closes: #18995
Signed-off-by: Muraoka Taro <koron.kaoriya@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: bpftrace files are not recognized from the hashbang line.
Solution: Add a hashbang check (Stanislaw Gruszka)
closes: #18992
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: ANSI escape colors are not displayed correctly in
non-termguicolors in vim (cli) on Windows. The red and blue
channels seem to be swapped.
Cause: When converting VTerm ANSI index colors to cterm colors in
terminal.c, the Windows case equivalent to NR-16 (:help
cterm-colors) is ignored.
Solution: Created and used a table to convert ANSI indexed colors to
cterm's NR-16 representation (Windows only). This table
corresponds to the inverse conversion of cterm_ansi_idx in
term.c. The values in both tables are exactly the same, but
the meanings are opposite, so they are separate tables
(Muraoka Taro).
closes: #18931
Signed-off-by: Muraoka Taro <koron.kaoriya@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Start each field at the correct tabstop - on a new line if required.
- Use "Type1/Type2" for return types rather than "Type1 or Type2",
matching the dominant style.
- Convert hyperlinked Ex commands to command markup, `:cmd`.
- Wrap overlong lines.
closes: #18438
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: MS-Windows: Missing fullscreen support for GUI version
Solution: Add "s" flag to guioptions (Mao-Yining)
- Implement fullscreen mode controlled by the 'go-s' flag in 'guioptions'
- Update documentation with usage examples and platform-specific details
See :help 'go-s' and :help gui-w32-fullscreen for complete documentation.
closes: #18836
Signed-off-by: Mao-Yining <101858210+mao-yining@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: MS-Windows: If a directory with a single character name is
included in the PATH environment variable without a trailing
path separator, executable() will not be able to find the
executable file under it.
Solution: The second argument of the after_pathsep() function is now
passed the next pointer where a path separator may exist
(Muraoka Taro).
As a specific example, the default installation path for PowerShell v7
is "C:\Program Files\PowerShell\7", but if you set this as is in the
PATH environment variable, Vim will not be able to find the pwsh.exe
command. In this case, Vim will try to search for "C:\Program
Files\PowerShell\7pwsh.exe".
Cause: The after_pathsep() function determines whether the location
passed as its second argument immediately follows a path separator.
However, in the code where the problem occurred, the second argument was
passed a location that might contain a path separator. As a result, it
was mistakenly determined that a path separator was present in cases
where the final directory name was a single character and not followed
by a path separator, and the path to search was incorrect.
closes: #18979
Signed-off-by: Muraoka Taro <koron.kaoriya@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: Test_glob_symlinks may fail on Windows with UCRT
runtime
Solution: Comment out the code, do not use _wstat().
(author)
For Test_glob_symlinks() to succeed, vim_stat() (which is actually
mswin_stat_impl()) must fail on empty symlinks. When the dynamically
linked C runtime is linked, _wstat() succeeds even on empty symbolic
links. As a result, Test_glob_symlinks() fails.
For details, see here:
https://github.com/koron/vc-stat-behavior-verificationcloses: #18962
Signed-off-by: Muraoka Taro <koron.kaoriya@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: heap-use-after-free when when accessing protect class
member (Foxe Chen)
Solution: Set cl->class_type_list and return directly, add tests for
using protected class method and variable from another class
(Yegappan Lakshmanan).
closes: #18971
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Use `:!start` directly, discard the using of `explorer.exe`.
- Update the document in `eval.txt`.
closes: #18985
Signed-off-by: Mao-Yining <mao.yining@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Added disclaimer to clarify that the Chinese translation is for
reference only and is not legally binding. The original English version
of the license is the sole authoritative text. No liability is accepted
for any ambiguities or errors arising from the translation.
closes: #18980
Signed-off-by: Mao-Yining <mao.yining@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Only Windows: The GLVS plugin fails in a PowerShell Desktop if
wget.exe is installed. The PowerShell Desktop has an alias
called wget which hides wget.exe.
Solution: Force .exe extension if wget.exe is available.
closes: #18987
Signed-off-by: Muraoka Taro <koron.kaoriya@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: After :botright copen and closing the quikfix window, the
cursor ends up in the wrong window. The problem is fr_child
always points to the first (leftmost for FR_ROW, topmost for
FR_COL) child frame. When do :vsplit, the new window is
created on the left, and frame_insert() updates the parent's
fr_child to point to this new left window.
Solution: Create a snapshot before open the quickfix window and restore
it when close it (glepnir).
closes: #18961
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: class and object member names are stored as char_u *
pointer requiring repeated strlen() calls and making it harder
to use length-aware string operations consistently.
Solution: Store ocm_name as a string_T instead of char_u *
(John Marriott).
In addition in vim9class.c:
1: change some calls from ga_concat() to ga_concat_len() where the
length is known.
2: in ex_class() remove unneeded variable name.
3. in intf_method_present() remove unneeded variable cl_name.
4: in update_member_method_lookup_table() move some assignments from
inner loops into outer loops.
5: in member_lookup() remove unneeded else.
6: in is_duplicate_variable() and is_duplicate_enum() rearrange the
string comparisons to first check the lengths match.
closes: #18973
Signed-off-by: John Marriott <basilisk@internode.on.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Since patch 7.4.264 a leading "g:" is skipped.
closes: #18976
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: clipboard provider does not respect 'clipboard' option
(Satoru Kitaguchi, after v9.1.1972)
Solution: make clipboard provider register respect "unnamed/unnamedplus"
from the 'clipboard' option value
fixes: #18930closes: #18952
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Chapter 2: Fix missing "R" after 1e3e1ba067 when using register from insert
mode. While at it, consistently use upper case letter for CTRL-R in the
new-tutor.
related: #18950
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Not enough tests for :setlocal omnifunc (after 9.1.1991).
Solution: Move the last :new after :setlocal. Also test with 'complete'
(zeertzjq).
closes: #18958
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Missing out-of-memory check in vim9class.c in calls to
vim_strnsave().
Solution: Refactor is_duplicate_variable() and is_duplicate_enum() and
make use of string_T struct instead (John Marriott).
closes: #18947
Signed-off-by: John Marriott <basilisk@internode.on.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: gcc.vim interprets "make: *** [Makefile" in the error message
"make: *** [Makefile:2: all] Error 1" as a valid filename.
Solution: Add pattern to extract the filename correctly. Note that this
doesn't remove the dangling "]" from the output ("all]").
closes: #18956
Signed-off-by: yilisharcs <yilisharcs@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: test_cmdline.vim leaves swapfiles behind
Solution: Close open buffers using :bw! instead of :close!
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Data races between test buffers are currently addressed by
relying on arbitrary execution delays or blissfully dismissed.
Solution: Prefer more deterministic synchronisation between test buffers
for test cases that generate screendump files with expected
results (Aliaksei Budavei)
closes: #18920
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: More deterministic synchronisation can be established between
processes running test cases and collecting visual effects to
a screendump file for future verification by anticipating
the availability of known parts of such a file and asserting
the location of the cursor.
Solution: Provide a convenience test function that waits a specified
time for cursor positioning (Aliaksei Budavei)
related: #18920
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: heap buffer overflow with COMPAREANY instruction
Solution: Verify the type and error out in case of different types
(Foxe Chen)
closes: #18945
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: Test_term_gettty() fails when using conpty on Windows,
CI uses winpty, so this test passes.
Solution: Skip the test Test_term_gettty(). Since conpty communicates
via anonymous pipes, there is no name that can be obtained
with term_gettty() (Muraoka Taro)
closes: #18954
Signed-off-by: Muraoka Taro <koron.kaoriya@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim intro screen shows register message (after v9.1.1893)
Solution: Remove the register message, registering is no longer useful
and possible.
fixes: #18933closes: #18934
Signed-off-by:
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: osc52 package can be further improved (after v9.1.1984).
Solution: Improve plugin, update test and check for clipboard_provider
feature (Foxe Chen).
closes: #18935
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: clipboard provider does not work when redirecting messages
(BenYip, after v9.1.1972)
Solution: Adjust ifdefs in ex_redir()
fixes: #18937closes: #18939
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
This change does the following:
- fix lesson number in tutor 1
- added and explanation about how get vimtutor lesson 2
- fix credits to authors in lesson 2
closes: #18940
Signed-off-by: Victorhck <victorhck@mailbox.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: test_sound.vim fails when run locally on Windows
Solution: Skip Test_play_silent in Windows non-GUI environments.
Cause: There are two causes:
1) The global variable g:id is undefined, causing an undefined
reference. Due to the execution order of test cases, g:id is defined in
Test_play_event. However, on Windows, this test is skipped, so g:id is
not defined. It is referenced in Test_play_silent's WaitForAssert()
without being defined, resulting in an undefined error.
Solution: Define g:id at the beginning of Test_play_silent.
2) In the non-GUI Windows version of vim, there is no message loop,
so the callback when play file sound ends does not occur, and
Test_play_silent's WaitForAssert times out and fails. In CI,
sound_playfile() returns 0, so Test_play_silent is skipped. The
reason for this is unknown, but it may be because CI is running on
Windows Server or something like that.
Solution: Skip Test_play_silent in Windows non-GUI environments.
Signed-off-by: Muraoka Taro <koron.kaoriya@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
closes: #18941
Problem: terminal OSC52 support to access the clipboard can be improved
Solution: Include and package the optional osc52 package, note: this
requires a Vim with clipboard provider feature (Foxe Chen).
related: #14995closes: #18575
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: class_name definition can be improved
Solution: Use string_T to store class_name, avoid using STRLEN() calls,
simplify code, remove unused definition of struct
oc_newmember_S (John Marriott)
Use struct string_T to store the field class_name in struct class_T,
which means we can just use the .length field in struct string_T
instead of measuring it.
In addition:
1. In eval.c use string_T to store class_name and s in function
class_tv2string().
2. In vim9type.c change some calls from ga_concat() to ga_concat_len()
where the length is known.
3. In vim9class.c remove unused struct definition oc_newmember_S.
Change some calls from ga_concat() to ga_concat_len() where the
length is known.
4. In scriptfile.c use string_T to store type_name, class_name and
es_name in function estack_sfile().
5. In function estack_sfile() simplify construction of the grow array ga
and change some calls from ga_concat() to ga_concat_len() when the
length is known.
closes: #18925
Signed-off-by: John Marriott <basilisk@internode.on.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: test suite may stop on error in gen_opt_test.vim
Solution: Use a different output file for log files (Muraoka Taro)
When running newtests, it may unexpectedly stop just before
test_options_all.
Cause: When generating the opt_test.vim file for test_options_all, the
failure is detected by the existence of test.log. Therefore, if a test
performed before test_options_all fails and test.log is created, it is
mistakenly thought that the generation of opt_tet.vim has failed, and
the test suite stops there.
So let's change the filename created when utils/gen_opt_test.vim fails
from test.log to gen_opt_test.log, so that it can be detected
independently from other test failures.
closes: #18928
Signed-off-by: MURAOKA Taro <koron.kaoriya@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: :helpclose incorrectly accepts a range and a count.
Solution: Remove EX_COUNT and EX_RANGE from the command definition.
(Doug Kearns)
closes: #18917
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When using listeners, there is no way to run callbacks at
specific points in the redraw cycle.
Solution: Add redraw_listener_add() and redraw_listener_remove() and
allow specifying callbacks for redraw start and end
(Foxe Chen).
closes: #18902
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
The agide.org domain no longer hosts Vim-related tools and now points to
unrelated content. Remove the outdated reference to avoid confusion.
closes: #18916
Signed-off-by: Gourmet <110063472+ItalianG0urmet@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: blob2str() may call strcpy with a NULL pointer
Solution: Check for NULL before calling STRNCPY()
closes: #18907
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: some minor problems with clipboard provider code
(after v9.1.1972)
Solution: Fix minor issues (Foxe Chen)
- allow empty register type for paste function to mean automatic
- fix internal inc_clip_provider() and dec_clip_provider() functions not
setting the pause count correctly
- don't call paste function when yanking
closes: #18909
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: No way to access the clipboard without X11/Wayland.
Solution: Add the clipboard provider feature (Foxe Chen).
closes: #18781
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Crash when buffer gets deleted inside charconvert during save
Solution: Check for `b_saving` inside `can_unload_buffer()`, so we don’t try to
unload a buffer while it’s still being saved (glepnir).
closes: #18901
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Add leading "$" to match other environment variable tags.
- Clarify :help $NoDefaultCurrentDirectoryInExePath.
closes: #18895
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Wrong cursor position after formatting with long 'formatprg'.
Solution: Don't show hit-enter prompt when there are stuffed characters.
Previously a stuffed character at the hit-enter prompt will dismiss the
prompt immediately and be put in the typeahead buffer, which leads to
incorrect behavior as the typeahead buffer is processed after the stuff
buffers. Using vungetc() when KeyStuffed is TRUE can fix this problem,
but since the hit-enter prompt isn't visible anyway (and is likely not
desired here), just skip the prompt instead, which also avoids a wait
when using "wait" instead of "hit-enter" in 'messagesopt'.
fixes: #18905closes: #18906
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: test_python3.vim leaves swapfiles behind
Solution: Close open buffers using :bw! instead of :close!
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: MS-Windows: dark mode in gui is not supported
Solution: Inplement the 'd' flag in 'guioptions'
(Mao-Yining).
related: #12282closes: #18877
Co-Authored-By: LemonBoy <thatlemon@gmail.com>
Signed-off-by: Mao-Yining <mao.yining@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When exiting at the end of the more prompt (at the hit enter
prompt) by hitting q the recording mode will be started.
(Jakub Łuczyński)
Solution: Don't add the q key to the typeahead buffer
in the function wait_return (Bjoern Foersterling)
fixes: #2589closes: #18889
Signed-off-by: Bjoern Foersterling <bjoern.foersterling@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Wrong display when using setline() at hit-enter prompt
(after 8.2.3204).
Solution: Only skip scrolling for changed lines in top area if it's
scrolled down due to w_topline change. Also add more testing
for what 8.2.3204 fixed (zeertzjq).
closes: #18887
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: diff: missing diff size limit for xdiff
Solution: Impose file size limit for internal diff (xdiff)
(Yee Cheng Chin).
Git imposes a hard cap on file size for content that it passes to xdiff
(added to Git in dcd1742e56e, defined in xdiff-interface.h), due to
integer overflow concerns in xdiff. Vim doesn't specify such a limit
right now, which means it's possible for a user to diff a large file
(1GB+) and trigger these overflow issues.
Add the same size limit (1GB minus 1MB) to Vim and simply throws an
error when Vim encounters files larger than said limit. For now, reuse
the same error message regarding internal diff failures. There is no
need to add the same limit for external diff as it's up to each tool to
error check their input to decide what is appropriate or not.
closes: #18891
Signed-off-by: Yee Cheng Chin <ychin.git@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Port changes from JuliaEditorSupport/julia-vim made during 2022-2025.
Most notably:
- 88f178c Do not reset shiftwidth/expandtab at undo
- f17257a Allow else block in try/catch
- 7946ce3 Support public statements (added in Julia v1.11.0-DEV.469)
Signed-off-by: Sergio Alejandro Vargas <savargasqu+git@unal.edu.co>
Signed-off-by: Christian Brabandt <cb@256bit.org>
The help text here said 99 was the recommended style for the standard
library, but I can't find a citation for this anywhere. In contrast the
Rust Style Guide hosted on rust-lang.org
[says](https://doc.rust-lang.org/stable/style-guide/#indentation-and-line-width)
the maximum line width is 100, and rustfmt
[agrees](37aa2135b5/src/tools/rustfmt/src/config/options.rs (L570)).
Having the two disagree causes an annoying off-by-one error in vim: if
you configure vim to highlight too-long lines then it will occasionally
complain about a line that rustfmt refuses to fix.
closes: #18892
Signed-off-by: Aaron Jacobs <jacobsa@google.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When the popup menu is displayed above the cursor and the
selected item has no room below for the info popup,
popup_adjust_position() places the popup in the available
space above. The calculation added some extra lines, causing
the popup to be misaligned.
Solution: For info popups, undo that extra spacing so the popup stays
aligned with the selected item (glepnir)
closes: #18860
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Outputting long strings using :echowindow wraps one character
per line and display in reverse order (Hirohito Higashi)
Solution: Use full width for :echowindow, reset msg_col after wrapping,
and increment lnum correctly when creating new lines (glepnir)
fixes: #18750closes: #18874
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Wrong display when scrolling with 'scrolloff' and calling
sign_unplace() and setline() in CursorMoved (after 8.2.3204).
Solution: Still scroll for changed lines below the top area when the top
is scrolled down (zeertzjq)
closes: #18878
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Add support for underscore-separated numeric literals in Odin syntax
highlighting. This allows proper highlighting of numbers like 1_000_000,
0xFF_AA_BB, and 0b1010_1111 as specified in the Odin language.
> Numerical literals are written similar to most other programming
> languages. A useful feature in Odin is that underscores are allowed
> for better readability: 1_000_000_000 (one billion).
> https://odin-lang.org/docs/overview/#numberscloses: #18852
Signed-off-by: Maxim Kim <habamax@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: test_sort.vim leaves swapfiles behind
Solution: Close open buffers using :bw! instead of :close!
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: sort() does not handle large numbers correctly
(Igbanam Ogbuluijah)
Solution: Don't truncate the return value of tv_get_number_chk()
(Yegappan Lakshmanan)
closes: #18868
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Setting a byte in a blob, accepts values outside 0-255
Solution: When setting a byte in a blob, check for valid values
(Yegappan Lakshmanan)
closes: #18870
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: gui_mch_set_titlebar_colors() doesn't need to be called when
'go+=C' is not set.
Solution: Switch the default value to false.
closes: #18872
Signed-off-by: Mao-Yining <mao.yining@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- cleanup of PR for tearing and other output options
- removed `allow_tearing` from global keywords (it's only an output option)
- moved `...clockwise` directives from general to transform options
- separated `icc` highlight to correctly detect and highlight paths
- updated output bg to use the same approach as `icc` for file path
- separated all identifier-matchers into their own groups
- added support for bar identifiers
closes: #18851
Signed-off-by: Josef Litoš <54900518+litoj@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- mapped all identifier-highlighting groups to a new group `i3ConfigIdent`
- i3config bar is now split into keyword and block matches
- support `xft:` namespace in fonts
- Update maintainer information in i3config.vim
related: #18851
Signed-off-by: Josef Litoš <54900518+litoj@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: need better tests for tf files
Solution: Add better filetype test for terraform/tf filetype
closes: #18339
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Match \dE\d real literal form
- Match all string escape sequences
- Add related tests
closes: #18723
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: Test_windows_external_cmd_in_cwd() is only run in huge
builds (after 9.1.1947).
Solution: Move it to test_system.vim so that it is run in normal builds.
closes: #18853
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: Test_tagjump.vim leaves swapfiles behind
Solution: Close open buffers using :bw! instead of :close!
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: :stag does not use 'swichtbuf' option, though the
documentation states differently
(Christian Brabandt)
Solution: Respect 'switchbuf' option (Yegappan Lakshmanan).
related: #18845closes: #18856
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Windows: Vim always adds the current directory to search path.
This should only happen when using cmd.exe as 'shell'. For
example, powershell won't run binaries from the current
directory.
Solution: Only add current directory to system path, when using cmd.exe
as 'shell'.
related: #10341
related: 083ec6d9a3
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: Windows: Vim may execute commands from current
directory (Simon Zuckerbraun)
Solution: Set the $NoDefaultCurrentDirectoryInExePath before running
external commands.
Github Advisory:
https://github.com/vim/vim/security/advisories/GHSA-g77q-xrww-p834
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Cannot open the help in the current window
Solution: Promote the example from tips.txt to a proper package and
include the helpcurwin package, add tests for it
(Peter Kenny)
closes: #18840
Signed-off-by: Peter Kenny <github.com@k1w1.cyou>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: Test_getbufwintabinfo() leaves swapfiles behind
Solution: Close all open buffers using %bw!
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: gewininfo() does not return if statusline is visible
Solution: Add status_height to the dict items returned by
getwininfo() (Hirohito Higashi)
closes: #18841
Signed-off-by: Hirohito Higashi <h.east.727@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Memory leak with :breakadd expr
Solution: Free debug_oldval and debug_newval before assigning to them.
Verify the existing (though confusing) :breakadd expr behavior
(zeertzjq).
It seems that :breakadd expr doesn't work as documented at all. This PR
only fixes the memory leak. The tests are for the existing behavior.
closes: #18844
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Assignment to read-only registers @: and @% is allowed during
compilation.
Solution: Abort compilation and emit an E354 error when assigning to
these registers (Doug Kearns).
Fix the E354 error emitted when attempting to declare @: with :var so
that it references the correct register, @:, rather than the garbage
string "^@".
closes: #18806
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: Test_execute_register() leaves swapfile behind
Solution: Use :bw instead of :close to close the buffer completely
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: clipboard registers "+" and "*" synced without "autoselect"
Solution: Remove code that explicitly syncs those clipboard registers
(Corey Hickey)
Before this change, writes to '+' get copied to '*', but only under
certain conditions. By default, this does not happen, because clipboard
"autoselect" (via :set clipboard+=autoselect) is enabled. Disabling
"autoselect" (an option which should only apply to visual mode) results
in normal-mode writes such as "+yy also going to the '*' register.
This behavior is undocumented and untested; remove the behavior in order
to make Vim's handling of these two registers be consistent.
This frees up the did_star variable to be removed.
Add a test to check that the registers are independent.
fixes: #18830closes: #18831
Signed-off-by: Corey Hickey <bugfood-c@fatooh.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: excessive wait in Test_matchfuzzy_initialized
Solution: Use term_wait() instead of the TermWait() wrapper
(Corey Hickey)
Test_matchfuzzy_initialized is a terminal test, which are specified to be
"flaky" and automatically retried. The TermWait wrapper multiplies the
specified wait time by higher values for later retries, maxing out at
10x the specified value. This makes tries #3 to #6 sleep for 20 seconds
each, which makes the test very slow to work with. The specified intent
of the test (as noted in a comment eight lines above here) is to
sleep for 2s.
closes: #18822
Signed-off-by: Corey Hickey <bugfood-c@fatooh.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: Test_matchfuzzy_initialized() fails
Solution: Send a dummy key (Corey Hickey)
Test_matchfuzzy_initialized seems to expect that the 'lvimgrep' will be
interrupted by sending a SIGINT. If the search finishes beforehand,
though, then the SIGINT triggers vim to tell the user how to quit.
Vim does not show this message immediately, though; instead, vim shows
the message next time it is active. When StopVimInTerminal() sends a key
sequence intended to cause vim to quit, this activates vim to show the
message instead of quitting.
I do not understand every detail of the problem fully--if I type the
characters from StopVimInTerminal() into a post-SIGTERM terminal
directly, that seems to work ok; there seems to be a timing issue due to
sending all the characters at once.
This fix does make the test work reliably for me, and the test still
works even if I limit my CPU frequency so that the search is interrupted
by the SIGINT.
fixes: #18821
related: #18822
Signed-off-by: Corey Hickey <bugfood-c@fatooh.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: Erlang lexical files are not recognized
Solution: Detect *.xrl files as leex filetype, include syntax and
filetype plugins (Jon Parise).
leex is the lexical analyzer generator for Erlang. Its input file format
follows a section-based structure and uses the `.xrl` file extension.
This initial work includes file detection, an ftplugin (which inherits
the Erlang configuration), and a syntax definition.
Reference:
- https://www.erlang.org/doc/apps/parsetools/leex.html
related: #18819closes: #18832
Signed-off-by: Jon Parise <jon@indelible.org>
Signed-off-by: Csaba Hoch <csaba.hoch@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: not all Erlang files are recognized
Solution: Detect *.app.src and rebar.config files as erlang filetype
(John Parise).
*.app.src files contain Erlang application definitions. (There are also
*.app files, which are similar but more often build artifacts, and that
file extension is too ambiguous to be recognized by default.)
Reference:
- https://www.erlang.org/doc/system/applications.html
Rebar is the Erlang build tool. rebar.config uses Erlang syntax.
Reference:
- https://rebar3.org/docs/configuration/configuration/closes: #18835
Signed-off-by: Jon Parise <jon@indelible.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
The pattern argument is optional. See :help :sort for another example.
closes: #18834
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Add `g:` prefix, so the example works in vim9script as well (errors
without it).
closes: #18827
Signed-off-by: Christian Brabandt <cb@256bit.org>
Signed-off-by: C.D. MacEachern <craig.daniel.maceachern@gmail.com>
Make it clear that the overall end value can be greater than
line('$') + 1.
fixes: #18664closes: #18828
Signed-off-by: Paul Ollis <paul@cleversheep.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: completion: complete_match() Vim script function and
'isexpand' option are not that useful and confusing
(after v9.1.1341)
Solution: Remove function and option and clean up code and documentation
(Girish Palya).
complete_match() and 'isexpand' add no real functionality to Vim. They
duplicate what `strridx()` already does, yet pretend to be part of the
completion system. They have nothing to do with the completion mechanism.
* `f_complete_match()` in `insexpand.c` does not call any completion code.
It’s just a `STRNCMP()` wrapper with fluff logic.
* `'isexpand'` exists only as a proxy argument to that function.
It does nothing on its own and amounts to misuse of a new option.
The following Vim script function can be used to implement the same
functionality:
```vim
func CompleteMatch(triggers, sep=',')
let line = getline('.')->strpart(0, col('.') - 1)
let result = []
for trig in split(a:triggers, a:sep)
let idx = strridx(line, trig)
if l:idx >= 0
call add(result, [idx + 1, trig])
endif
endfor
return result
endfunc
```
related: #16716fixes: #18563closes: #18790
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: completion: 'completefuzzycollect' option is too obscure
Solution: Deprecate the option, but don't error out for existing scripts,
behave like 'completefuzzycollect' is set when fuzzy
completion is enabled (Girish Palya).
fixes: #18498closes: #18788
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Change "Prepended" (past tense) to "Prepend" (present tense,
imperative).
- Add short examples clarifying the behavior of prepending a count to
commands that jump to changes in diff mode.
closes: #18810
Signed-off-by: Brent Pappas <pappasbrent@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: xxd: exit_with_usage() can be simplified
Solution: Clean up exit_with_usage() formatting slightly
(Stefan Haubenthal)
closes: #18813
Signed-off-by: Stefan Haubenthal <polluks@sdf.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Add "Environment variables are expanded |:set_env|" documentation to
options that have the P_EXPAND flag but were missing this note.
Updated options:
- 'cdpath'
- 'dictionary'
- 'mkspellmem'
- 'packpath'
- 'runtimepath'
- 'spellfile'
- 'spellsuggest'
- 'thesaurus'
- 'ttytype'
- 'undodir'
- 'verbosefile'
- 'viewdir'
- 'viminfofile'
These options support environment variable expansion in their values
(e.g., $HOME, $USER) but the documentation didn't explicitly mention
this capability. This brings their documentation in line with other
options like backupdir, directory, and makeprg that already include
this note.
closes: #18791
Signed-off-by: Alex Plate <AlexPl292@gmail.com>
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: xdiff: Coverity warning with MAX_CNT/UINT_MAX usage
(after v9.1.1921)
Solution: Replace XDL_MIN macro to a manual check.
(Yee Cheng Chin)
In the recent xdiff upstream sync (#18765), MAX_CNT in xhistogram was
switched back to using UINT_MAX to match upstream. This exposed an issue
in xdiff that using using min() to compare against the max integer will
not work as the number will just overflow. Switch the check to be done
in a saturating add that respects integer overflow.
related: #18765closes: #18792
Signed-off-by: Yee Cheng Chin <ychin.git@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
*ft_ada.txt* For Vim version 9.1. Last change: 2025 Aug 06
*ft_ada.txt* For Vim version 9.2. Last change: 2026 Feb 14
ADA FILE TYPE PLUG-INS REFERENCE MANUAL~
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
