Problem: MS-Windows: rendering artifacts with DirectX renderer
Solution: Enable ETO_CLIPPED for DirectWrite rendering in
gui_mch_draw_string() to ensure glyphs stay within their
cell boundaries (Yasuhiro Matsumoto).
closes: #19711
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Using a long generic function name may cause a heap buffer
overflow in common_function().
Solution: Allocate memory for the full name instead of using IObuff
(Kaixuan Li).
closes: #19727
Signed-off-by: Kaixuan Li <kaixuanli0131@gmail.com>
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When drawing a custom tabline, if topframe->fr_width is
larger than Columns (possible during tab closure with
showtabpanel=1), Vim writes past the end of the
TabPageIdxs[] array.
Solution: Cap the column limit at Columns to ensure TabPageIdxs is
never accessed out-of-bounds (thinca).
closes: #19725
Supported by AI
Signed-off-by: thinca <thinca@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When 'termguicolors' is used on MS-Windows (VTP mode), sending
CSI query sequences (like DECRQM) causes the console to
generate responses that are misinterpreted as keystrokes.
The leading ESC triggers a beep or 'visualbell' flash.
Solution: In mch_write(), discard CSI sequences when USE_VTP is active
so the console does not process queries and generate unwanted
input responses (Yasuhiro Matsumoto).
related: #11532
closes: #19694
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: gethostbyname() and inet_ntoa() are deprecated and cause
build errors on modern MSVC versions.
Solution: Use getaddrinfo() and inet_ntop() when FEAT_IPV6 and
HAVE_INET_NTOP are defined. Keep the old functions as
fallbacks for legacy platforms (Yasuhiro Matsumoto).
closes: #19719
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: autocmds that switch windows may cause them to remain with
w_locked set, preventing them from being closed longer than
intended.
Solution: Unset w_locked in the window where it was set (Sean Dewar).
closes: #19716
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: line('w0') moves cursor in terminal-normal mode
(Biebar, after v9.2.0127)
Solution: Check that the terminal is not in terminal-normal-mode
(Ozaki Kiichi).
fixes: #19717closes: #19718
Signed-off-by: Ozaki Kiichi <gclient.gaap@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: possible crash with winminheight=0
(Emilien Breton)
Solution: Use <= instead of < when checking reserved room in
frame_setheight() to correctly handle the zero-height
boundary case (Hirohito Higashi).
In frame_setheight(), when shrinking the current window and the only
other window has 'winfixheight' with 'winminheight'=0, room_reserved
was not cleared because the condition used '<' instead of '<='.
The freed rows were discarded, leaving fr_height sum less than
topframe fr_height. Subsequent resize operations then computed a
wrong room_cmdline that expanded topframe beyond the screen, causing
a crash.
fixes: #19706closes: #19712
Signed-off-by: Hirohito Higashi <h.east.727@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: MS-Windows: Compile warning for converting from size_t to int
breaks the Appveyor CI (after v9.2.0168)
Solution: Explicitly cast to int in convert_string() (ichizok).
closes: #19722
Signed-off-by: ichizok <gclient.gaap@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim sends DEC mode query requests (DECRQM) regardless of the
terminal mode.
Solution: Only send DEC mode requests when cur_tmode is TMODE_RAW, but
e.g not for gui mode (Foxe Chen).
fixes: #19709closes: #19710
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: Can set environment variables in restricted mode
Solution: Disallow settings variables in exec_instructions() when in
restricted mode (pyllyukko)
related: #13394
closes: #19705
Signed-off-by: pyllyukko <pyllyukko@maimed.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When 'diffopt' does not include "internal", Vim attempts to
execute an external diff command even in restricted mode.
This could be used to bypass restricted mode.
Solution: Call check_restricted() in diff_file() before attempting to
execute an external diff (pyllyukko).
closes: #19696
Signed-off-by: pyllyukko <pyllyukko@maimed.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: No tests for what v9.2.0141 and v9.2.0156 fixes
Solution: Add tests for using :perldo and rubeval() in sandbox mode
related: #19664
related: #19653
closes: #19699
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When using 'diffopt=inline:word', lines were excessively
fragmented with punctuation creating separate highlight
blocks, making it harder to read the diffs.
Solution: Added 'diff_refine_inline_word_highlight()' to merge
adjacent diff blocks that are separated by small gaps of
non-word characters (up to 5 bytes by default) (HarshK97).
When using inline:word diff mode, adjacent changed words separated by
punctuation or whitespace are now merged into a single highlight block
if the gap between them contains fewer than 5 non-word characters.
This creates more readable diffs and closely matches GitHub's own diff
display.
closes: #19098
Signed-off-by: HarshK97 <harshkapse1234@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: Test_balloon_eval_term_visual is flaky
Solution: Use redraw and WaitForAssert() to make it more reliable
Previously, it failed about 1 out of 4 runs for me, now I got it down to
1 out of 10. It's not perfect, but better than before.
closes: #19692
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Missing semicolon in os_mac_conv.c (after v9.2.0168)
Solution: Add it (Yasuhiro Matsumoto).
The missing semicolon was introduced in patch 9.2.0168
(b00f441e6), which breaks the macOS build.
closes: #19695
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: MS-Windows: GetVersionEx() is deprecated since Windows 8.
Version checks for specific features (like dark mode or title
bar colors) are duplicated across files using multiple boolean flags.
Solution: Use RtlGetVersion() to centralize detection in a single
win_version variable. Use the MAKE_VER() macro to check
against major, minor, and build numbers. Update titlebar
colors and dark theme to use proper version thresholds
(Mao-Yining).
closes: #19673
Signed-off-by: Mao-Yining <mao.yining@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Corrected the translation for 'paste' from '粘帖' to '粘贴'.
In Chinese, the correct term for the computer action "paste" is 粘贴
(zhān tiē). The original translation used 粘帖, which contains a very
common typo. The second character was mistakenly written as 帖 (which
means a note or invitation) instead of the correct character 贴 (which
means to stick or paste).
closes: #19689
Signed-off-by: Murasame <88932464+CuteMurasame@users.noreply.github.com>
Signed-off-by: Mao-Yining <mao.yining@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: channel: some issues in ch_listen()
(char101, after v9.2.0153)
Solution: On MS-Windows, initialize using channel_init_winsock() and use
SO_EXCLUSIVEADDRUSE instead of SO_REUSEADDR, allow to use port
0 to have the OS assign a port (Yasuhiro Matsumoto).
related: #19231
closes: #19690
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
When system() or systemlist() is called without :silent from a
statusline expression, autocommand, or timer callback, the terminal
is temporarily set to cooked mode, which re-enables ECHO on the tty.
If a terminal response (e.g. DECRPM for cursor blink mode) arrives
during this window, the tty driver echoes it to the screen, leaving
stray characters that require CTRL-L to remove.
This behavior was intentionally addressed in patch 7.4.427 by
skipping cooked mode when :silent is prepended. However, the
documentation only mentioned this for system() and did not cover
systemlist() at all. The guidance to use :silent in non-interactive
contexts (statusline, autocommands, timers) was also not explicit.
closes#19691
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: assertion failure in syn_id2attr()
(@julio-b, after v9.2.0093)
Solution: Set tp_curwin to a valid window in popup_close_tabpage()
and return early in update_winhighlight() if there are
no highlight overrides to update (Foxe Chen).
fixes: #19650closes: #19670
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: invalid pointer casting in string_convert() arguments
Solution: Use a temporary local int variable (James McCoy)
string_convert()/string_convert_ext() accept an "int *lenp" parameter,
however a few call sites were taking the address of a possibly larger
type (long, size_t) and casting it as an int * when calling these
functions.
On big-endian platforms, this passes the (likely) zeroed high bytes of
the known length through to string_convert(). This indicates it received
an empty string and returns an allocated empty string rather than
converting the input. This is exhibited by test failures like
From test_blob.vim:
Found errors in Test_blob2str_multi_byte_encodings():
command line..script src/testdir/runtest.vim[636]..function RunTheTest[63]..Test_blob2str_multi_byte_encodings line 2: Expected ['Hello'] but got ['']
command line..script src/testdir/runtest.vim[636]..function RunTheTest[63]..Test_blob2str_multi_byte_encodings line 3: Expected ['Hello'] but got ['']
command line..script srctestdir/runtest.vim[636]..function RunTheTest[63]..Test_blob2str_multi_byte_encodings line 6: Expected ['Hello'] but got ['']
Instead, use a temporary local int variable as the in/out variable for
string_convert() and assign the result back to the larger typed length
variable post-conversion.
closes: #19672
Signed-off-by: James McCoy <jamessan@debian.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: setting buftype=terminal may cause a crash
(lacygoill, after v9.2.0127)
Solution: Validate that curwin->w_buffer->b_term is not null
fixes: #19686closes: #19676
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Coverity warning for potential NULL dereference in channel.c
(after v9.2.0153)
Solution: Use empty string in case hostname is NULL.
CID: 1686330
related: #19676
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: perleval fails in the sandbox
(after v9.2.0156)
Solution: Update tests and assert that it fails
related: #19676
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: build error when XCLIPBOARD is not defined
(Tony Mechelynck, after v9.2.0158)
Solution: Update ifdefs
related: #19676
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: intro message disappears on startup in some terminals
(chdiza, after v9.2.0139)
Solution: Only call set_shellsize() in handle_csi() if the reported
width or height actually differs from the current
Rows or Columns. (Foxe Chen)
fixes: #19656closes: #19660
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Crash when reading quickfix line (Kaiyu Xie)
Solution: Make sure line is terminated by NUL
closes: #19667
Supported by AI
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim could use the VisualNOS highlight group when not connected
to an X server.
Solution: Always highlight visual selections with Visual when not
connected to an X server (Shane Harper)
When Vim is running with X11 support it chooses between the Visual and
VisualNOS highlight groups for a visual selection based on whether it
believes it owns the X selection. According to :help hl-VisualNOS,
VisualNOS should only be used by the X11 GUI or when using the
xterm-clipboard feature, however, prior to this commit Vim could choose
VisualNOS when a clipboard provider was used, even when Vim was not
connected to an X server.
closes: #19659
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: concatenation can be improved
Solution: Cache string segments lengths in exe_concat() and avoid
strlen() calls (John Marriott).
closes: #19647
Signed-off-by: John Marriott <basilisk@internode.on.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Lua 5.5 makes for-loop control variables read-only.
The path-parsing logic in if_lua.c attempts to modify the
loop variable 's', causing the script to fail during
runtime initialization (Binbin Qian)
Solution: Use a Lua capture group in gmatch() to extract the path
without the semicolon, avoiding the need to re-assign
to the loop variable.
fixes: #19639closes: #19658
supported by AI
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim can only act as a channel client (ch_open). There is
no way for an external process to initiate a connection
to a running Vim instance using the Channel API.
Solution: Implement ch_listen() and the underlying server-side
socket logic. This allows Vim to listen on a port or
Unix domain socket. When a client connects, a new
channel is automatically created and passed to a
user-defined callback (Yasuhiro Matsumoto).
closes: #19231
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Problem: concatenating strings is slow
Solution: Use grow_string_tv() to grow the existing string buffer in
place when possible (Yasuhiro Matsumoto).
closes: #19642
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: blob_from_string() is slow for long strings
Solution: Use ga_grow() to allocate memory once, perform a bulk copy
with mch_memmove() then translate NL to NUL in-place
(Yasuhiro Matsumoto).
closes: #19665
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When using synchronized terminal output, the internal
output buffer is not flushed before sending the
End Synchronized Update (ESU) sequence. This causes
redrawing artifacts.
Solution: Call out_flush() immediately before sending the ESU
sequence to ensure all pending drawing commands are
contained within the synchronized update window.
(Yasuhiro Matsumoto)
closes: #19662
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: do_unlet_var() unconditionally calls dictitem_remove() in its
final else branch, but for imported items lp->ll_dict is NULL,
causing a segfault (Peter Kenny)
Solution: Add a NULL check and return E1260 instead.
Affects :unlet at vim9script level and inside legacy :function.
The :def case already worked (handled in vim9cmds.c).
fixes: #19637closes: #19657
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Compile error when FEAT_DIFF is not defined (after v9.2.0144)
Solution: Add ifdefs around those lines (John Marriott).
related: #19622
Signed-off-by: John Marriott <basilisk@internode.on.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- ftplugin(sshdconfig): use "-I" for 'keywordprg' to search
case-insensitive in the man page
- syntax(sshdconfig,sshconfig): Mark "lowdelay", "throughput", and
"reliability" as deprecated for IPQoS, highlighting them as
errors/warnings to reflect OpenSSH 10.1p1 release
Reference:
https://www.openssh.org/releasenotes.html#10.1p1closes: #19636
Signed-off-by: Eisuke Kawashima <e-kwsm@users.noreply.github.com>
Signed-off-by: Jakub Jelen <jakuje@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: blob: concatenation can be improved
Solution: Use ga_grow() to allocate space once and mch_memmove() to copy
the blob data as a single block and fall back to the previous
byte by byte append (Yasuhiro Matsumoto).
closes: #19645
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: dictionary lookups can be improved
Solution: Replace the vim_strncpy() by mch_memmove() call.
(Yasuhiro Matsumoto).
closes: #19646
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim often calls utf_ptr2char() and utf_ptr2len() separately.
Solution: Refactor UTF-8 hot paths into utf_ptr2char_and_len() to
decode the codepoint and byte length in a single pass.
Fold combining character logic into the same optimized flow.
Improves redraw performance by ~8-10% in UTF-8 heavy
scenarios (Yasuhiro Matsumoto).
closes: #19649
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: 'statuslineopt' is a global only option and configuring the
line height is limited.
Solution: Make 'statuslineopt' global-local to a window and allow to
configure a fixed-height height statusline per window
(Hirohito Higashi).
closes: #19622
Signed-off-by: Hirohito Higashi <h.east.727@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: termdebug :Break does not support `thread` and `if` arguments
Solution: extend :Break and :Tbreak to accept optional location, thread
{nr}, and if {expr} arguments (Yinzuo Jiang).
closes: #19613
Signed-off-by: Yinzuo Jiang <jiangyinzuo@foxmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: :perl ex commands allowed in restricted mode (pyllyukko)
Solution: Add EX_RESTRICT flag to :perldo/:perl command definition.
closes: #19653
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Reading large files is slow because UTF-8 validation and
newline scanning are performed byte-by-byte. Initial file
loading also triggers listener and channel processing.
Solution: Use memchr() for SIMD-optimized newline scanning, implement
word-at-a-time ASCII skipping during UTF-8 validation using a
bitmask, skip listener/netbeans/channel notifications
when the ML_APPEND_NEW flag is set during readfile()
(Yasuhiro Matsumoto).
closes: #19612
Co-authored-by: NRK <nrk@disroot.org>
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Improve the performance of all pythonNumber patterns by unrolling
digit/underscore sequence loops.
- Split the float literal pattern into two simpler patterns.
fixes: #19625 (Reported by James McCoy)
closes: #19630
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: winhighlight option handling can be improved
(after: v9.2.0093)
Solution: Check entire override stack in update_highlight_overrides();
update w_hl of every window in highlight_changed() (Foxe Chen).
closes: #19633
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- remove `set isk+=-` to highlight `-=` operator correctly
- implement highlighting of GID
- fix highlight of hostname and add special value ALL
- fix highlight of IP address
- update include and includedir patterns
- remove duplicate syntax rules
- add missing options
- fix highlight of parameter assignment (limit operators to list
parameters)
- fix highlight of string and list parameters with trailing whitespaces
- implement highlight of permission (octal)
- implement highlight of floating point numbers
- implement highlight of timeout-specific options
- support highlight of negatable options (integer, mode, float, timeout,
string)
- allow sudoersListParameter to be negated
- fix highlight of comma-separated parameter list used as boolean
- fix highlight of parameter negation (prevent highlighting ill-formed `! !`)
- fix highlight of Tag_Spec
- allow empty Runas spec: `()` and `(:)`
- fix highlight of comma-concatenated commands, hosts, and users
- check word boundaries for special value ALL
- implement highlight of Option_Spec
- fix highlight in User_Spec (specifically for Host position)
- fix highlight of `Default!` command
- support highlight of digests (sha224, etc.)
- add syntax test and update header
closes: #19634
Signed-off-by: Eisuke Kawashima <e-kwsm@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Using a composing character as the end of a range inside a
collection may corrupt the NFA postfix stack
(Nathan Mills, after v9.1.0011)
Solution: When a character is used as the endpoint of a range, do not emit
its composing characters separately. Range handling only uses
the base codepoint.
supported by AI
Github Advisory:
https://github.com/vim/vim/security/advisories/GHSA-9phh-423r-778r
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: With zsh, executing :!nohup xdg-open url >/dev/null 2>&1 &
does not launch the browser. This occurs presumably because
gvim/zsh cleans up background processes in a non-interactive
session too quickly.
Solution: Use job_start() with "stoponexit" set to an empty string.
This bypasses the shell entirely (fixing the zsh issue)
and ensures the browser process is not killed when Vim exits.
On Linux, shellescape() is removed as job_start() in list
mode handles special characters natively.
fixes: #19594
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: memory leak in socket_server_send_reply() in src/os_unix.c
Solution: Free final in the error case when returning early
(Huihui Huang).
closes: #19627
Signed-off-by: Huihui Huang <625173@qq.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: Test_recover_corrupted_swap_file1 fails on big-ending
systems (after v9.2.0077)
Solution: Skip the test on big-endian systems (James McCoy)
The POC files were generated on 64-bit little-endian systems and
therefore are not portable to any other system type.
Extract the 64-bit / endianness detection from
Test_recover_corrupted_swap_file() into a SetUp() function and use that
data to determine if the test should be run.
closes: #19620
Signed-off-by: James McCoy <jamessan@debian.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Potential buffer overflow in regdump()
Solution: Add the size to the compiled regular expression and ensure we
don't read over the limit.
Note: this is not a security issue, because regdump() is typically not
compiled in any version of Vim, so should not affect anybody.
supported by AI claude.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: :tab accepts a tab address range but doesn't specify this in
the command specification.
Solution: Add EX_RANGE and EX_ZEROR to the command specification and use
ADDR_TABS (Doug Kearns).
As command modifers are handled separately before these flags are tested
in the ex-command parser they have no effect. However, it's better to
use an accurate description and the command specification table has uses
in other areas like runtime file generation for the Vim filetype.
closes: #19100
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Wayland: using _Boolean instead of bool type
Solution: Change type of variable (Christoffer Aasted).
related: #19473
closes: #19610
Signed-off-by: Christoffer Aasted <dezzadk@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: In a terminal window, line('w0') and line('w$') return wrong
values instead of the first and last visible line number,
because a terminal buffer does not go through the normal
redraw path that updates w_topline and w_botline (ubaldot).
Solution: Before computing w0 and w$, sync the terminal contents to the
buffer by calling may_move_terminal_to_buffer() so that
w_topline and w_botline are correctly updated.
fixes: #19585closes: #19615
supported by AI claude.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: String handling can be improved
Solution: Pass string length where it is known to avoid strlen() calls,
do a few minor refactors (John Marriott).
This commit changes some calls to function `set_vim_var_string()` to pass
the string length where it is known or can be easily calculated.
In addition:
In `evalvars.c`:
* In function `set_reg_var()` turn variable `regname` into a C string
because that is how it used.
* Small cosmetics.
In `option.c`:
* Slightly refactor function `apply_optionset_autocmd()` to move some
variables closer to where they are used.
In `getchar.c`:
* Slightly refactor function `do_key_input_pre()`:
-> change call to `dict_add_string()` to `dict_add_string_len()` and
pass it the length of `buf`.
-> only call `get_vim_var_string()` once.
In `message.c`:
* Use a `string_T` to store local variable `p`.
In `normal.c`:
* Move some variables closer to where they are used.
closes: #19618
Signed-off-by: John Marriott <basilisk@internode.on.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Just to fix some phrases:
- "A Vim clone". Neovim document says that it is not a clone, but just a
fork https://neovim.io/doc/user/nvim/#nvim
- "Supports a remote GUI". Neovim supports any UI (both GUI and TUI)
that implements its UI protocol, so "a" is not correct
- "Integration with scripting languages". This is true, but it is also
true to Vim (which supports 8 scripting languages AFAIK), so this
probably doesn't need to be said in this document. Instead, what makes
Neovim unique in this "scripting languages" aspect is its first class
support for Lua.
closes: #19605
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Phạm Bình An <phambinhanctb2004@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: test_textformat.vim leaves swapfiles behind
Solution: Close open buffer using :bw! instead of :close!
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: With auto paragraph formatting enabled, when a user makes an
attempt to add a new word before the end of a line and with
the following space bringing the line width over 'textwidth',
the space ends up just getting swallowed by the editor.
Solution: Detect such a constellation and do not auto-format in that
case (Daniel Müller).
closes: #19593
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: GTK: gdk_pixbuf_new_from_xpm_data() is deprecated since
2.44.5, causing build warnings
Solution: Replace XPM icon loading with PNG byte arrays loaded via
g_memory_input_stream_new_from_data() and
gdk_pixbuf_new_from_stream(). These APIs are available since
GLib 2.12 and gdk-pixbuf 2.14 (around 2008) so should be safe
to use today.
fixes: #19446closes: #19583
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim still supports compiling on NeXTSTEP
Solution: Drop Support (Damien Lejay)
The NeXTSTEP operating system has been obsolete for decades. The
special-case code required to support it adds unnecessary complexity,
preprocessor conditionals, and non-standard workarounds to the codebase.
This commit removes all support for NeXTSTEP, simplifying the code and
build system in several ways:
- Replaced custom configure checks for `union wait` with a standard `AC_CHECK_FUNCS` call for `waitpid`.
- Removed all conditional code that used the non-standard `union wait` for process status, relying solely on a standard `int`.
- Replaced calls to the non-standard `wait4()` function with the POSIX-standard `waitpid()`.
- Cleaned up headers (`os_unix.h`, `os_unixx.h`) to remove NeXT-specific workarounds and macros.
- Removed obsolete NeXT compilation instructions from the INSTALL file.
This change improves maintainability and makes the Unix process handling code more linear and compliant with modern POSIX standards.
related: #18079
closes: #19582
Signed-off-by: Damien Lejay <damien@lejay.be>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: memory leak in list_extend_func() in list.c
Solution: Free l1 on early return (Huihui Huang)
closes: #19572
Signed-off-by: Huihui Huang <625173@qq.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: test_normal fails
Solution: Ensure the terminal width is 40 columns and also
check for existence of the tr.mo file
closes: #19608
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When initializing a window in win_init(), w_hl is reset to
NULL without ensuring existing highlight overrides are
cleared (after v9.2.0113)
Solution: Clear highlight overrides and reset w_hl in win_init(). Remove
the redundant VIM_CLEAR() from win_init_empty() (Foxe Chen).
closes: #19609
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When a popup info window is reused, win_init_empty() resets
w_hl to NULL without freeing the previously allocated value,
causing a memory leak (after v9.2.0113)
Solution: Free w_hl before resetting it to NULL in win_init_empty()
using the VIM_CLEAR() macro.
closes: #19607
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: test_wayland.vim fails when X11 is not available or
$XDG_RUNTIME_DIR is not defined
Solution: Skip test_wayland when prerequisites are not fulfilled
closes: #19579
Signed-off-by: Christian Brabandt <cb@256bit.org>
Left out reddit intentionally, I think it's not the best place for
contribution questions, however irc has several contributors.
closes: #19604
Signed-off-by: dezza <402927+dezza@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: popup: When an async redraw is triggered, the screen may flicker
because the terminal may render the intermediate states of the
redraw.
Solution: Enable synchronized output if possible to ensure the terminal
renders the entire update at once (Yasuhiro Matsumoto).
closes: #19584
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Support all GNU address extensions.
- Fix some bugs related to erroneous matching of pattern delimiters in
bracket expressions.
closes: #19587
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: MS-Windows: terminal output may go to wrong terminal with
ConPTY
Solution: Explicitly disable inheriting the terminal handles
(gcrtnst).
closes: #19589
Signed-off-by: gcrtnst <52910071+gcrtnst@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: winhighlight pointer may be used uninitialized causing a crash
Solution: Initialize pointer in win_init() and win_init_empty()
(Foxe Chen).
closes: #19601
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: popup: windows flicker when updating text
Solution: Only refresh the popup mask if the position or size changed,
manually set the window redraw type instead of using
redraw_win_later() to avoid triggering a full screen redraw.
Handle opacity 100 correctly. Keep "firstline" sticky when
setting options (Yasuhiro Matsumoto).
related: #19510
closes: #19559
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
In commit cdf717283 ("patch 8.2.4424: ".gts" and ".gjs" files are not
recognized", 2022-02-19) support for the glimmer file types were added.
Problem: Syntax hilighting suppoprt was missing.
Solution: Added a glimmer syntax file that will leverage the base
syntaxs (javascript/typescript) and include handlebars syntax
for .gjs/.gts files.
closes: #19569
Signed-off-by: Devin Weaver <suki@tritarget.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
The runtime had support to detect handlebars (*.hbs) files as filetype
handlebars but was lacking any indent or syntax highlighting for that
filetype.
The handlebars syntax file is also a prerequisite for the glimmer
syntax.
Permission was granted by the original author to retrofit these into the
Vim runtime. Original License (MIT) maintained in code comments.
related: #19569
Signed-off-by: Devin Weaver <suki@tritarget.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: No support for terminal synchronization mode
Solution: Add DEC 2026 support using the 'termsync' option
(Foxe Chen).
related: #11718
closes: #19541
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: VIM_BACKTICK is always defined except for tiny builds
Solution: Remove the VIM_BACKTICK define and always compile backtick
expansion. This change however will cause the vim.tiny build
to be slightly larger (Martin Tournoij).
closes: #19562
Signed-off-by: Martin Tournoij <martin@arp242.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: byteidx_common() and f_utf16idx() are calling ptr2len() twice
per iteration, instead of reusing the already computed clen.
Solution: Reuse clen for pointer advancement in both functions
(Yasuhiro Matsumoto).
closes: #19573
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: Test_statuslineopt() is flaky
Solution: Force a redraw earlier and read screen content directly using
screenstring() instead of g:ScreenLines() (Hirohito Higashi).
closes: #19571
Signed-off-by: Hirohito Higashi <h.east.727@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: memory leak in expand_findfunc() (after v9.1.0811)
Solution: Free list variable l on early return (Huihui Huang).
closes: #19564
Signed-off-by: Huihui Huang <625173@qq.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: memory leak in heredoc_get() in src/evalvars.c
Solution: Free variable l on early return (Huihui Huang).
closes: #19563
Signed-off-by: Huihui Huang <625173@qq.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: popup: flickering on opaque popups with overlapping text,
even if they are opaque (after v9.2.0016).
Solution: Prevent double redrawing by skipping background updates for
opaque popups. Revert changes to test dumps
(Javier Jaramago Fernández).
A flickering effect was introduced in commit v9.2.0016 (commit:
6c203072f) for all popups. This is a consequence of a double redraw of
the overlapping background characters. This could be expected for
transparent popups, but, it should exclude opaque ones. For a complete
fix of the flickering this commit is required in combination with fix
present in v9.2.0064 (commit: 97c5bed84b).
Additionally this commit reverts changes introduced for tests dumps for
masks in commits 6c203072f and cded5e220. These dumps were updated
preventing characters from popups to take into account the masks
specified for them. This forces the redraw of popup characters, even
when masks attempt to prevent them, leading to flickering effects. See
issues #19510 and PR: #19534.
closes: #19534
Signed-off-by: Javier Jaramago Fernández <jaramago.fernandez.javier@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: 'listchars' "leadtab" not used in :list (after 9.2.0088).
Solution: Also check for "leadtab" when using :list. Fix memory leak on
E1572 if "multispace" or "leadmultispace" is set (zeertzjq).
closes: #19557
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: A recent commit introduced a new function named
`update_highlight_overrides()` in `highlight.pro` and
`highlight.c`, one of the parameter names conflicts with the C++
keyword `new`. This causes compilation issues on Windows when
VIM is compiled with OLE enabled, as "if_ole.cpp" cannot compile
due to the conflict (after v9.2.0093).
Solution: Rename the parameter name of `update_highlight_overrides()`
from new to hl_new (Wei Tang)
fixes: #19568closes: #19558
Signed-off-by: Wei Tang <gauchyler@uestc.edu.cn>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Coverity complains about uninitialized var, also gcc warns
about a few other variables possibly being used uninitialized
(Tony Mechelynck, after v9.2.0093)
Solution: Initialize a few other variables.
Coverity CID: 1683101
closes: #19561
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Coverity: error handling issues in win_init() (after
v9.2.0093)
Solution: Only call pop_highlight_overrides() when
push_highlight_overrides() was successful.
CID: 1683100
related: #19561
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Memory leak in qf_push_dir() (after v9.2.0091)
Problem: free dirname, if it is not a directory.
closes: #19552
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: The has() function is slow because it performs a linear scan
of the feature list for every call.
Solution: Move common runtime checks and the patch-version parser to the
beginning of the f_has() function (Yasuhiro Matsumoto).
closes: #19550
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: In XTerm, typing Home, End, PgUp or PgDn on the editing pad
will cause vim to recognize <kHome>, <kEnd>, <kPageUp> or
<kPageDown> (keypad keys) instead of <Home>, <End>, <PageUp>
or <PageDown> (editing pad keys) respectively, affecting
mappings and the :terminal. This is caused because the keypad
termcaps are sorted before the editing pad ones in
termcodes, meaning vim will match the former if they are the
same.
Solution: Only recognize keypad keys when nothing else matches
(AstroSnail).
fixes: #17331closes: #19145
Signed-off-by: AstroSnail <astrosnail@protonmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: In popup windows, concealed characters and tab expansion
may cause wrong truncation for fixed width windows.
Solution: Do not adjust the screen column and bogus column counters
for popup windows when handling concealed text or extra
padding characters (Yasuhiro Matsumoto).
closes: #19121
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Not possible to have window-local highlighting groups
(Hima)
Solution: Port Neovims 'winhighlight' option to Vim (Foxe Chen).
fixes: #3576closes: #19493
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: inside_block() iterates through all cstack levels
and returns TRUE when a CSF_BLOCK frame is found. For control
flow commands this causes '|' to no longer be
recognised as a command separator, breaking
"try | silent cmd | catch | endtry" (Martin Tournoij, after
v9.2.0072).
Solution: Return FALSE from inside_block() for control flow commands
that handle '|' themselves, so they always use '|' as
separator regardless of block nesting.
fixes: #19535closes: #19543
supported by AI claude.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: "leadtab" behavior inconsistent on line with only TABs
(after 9.2.0088).
Solution: Don't consider those as leading TABs. Also add more tests for
existing behavior of "lead" and "leadmultispace" (zeertzjq).
closes: #19549
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: netrw: does not take port into account in hostname validation
(after v9.2.0073)
Solution: Update hostname validation check and test for an optional port
number (Miguel Barro)
closes: #19533
Signed-off-by: Miguel Barro <miguel.barro@live.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Omit paste capability from the osc52 provider when g:osc52_disable_paste
is enabled This avoids OSC 52 paste queries on unsupported terminals and
prevents the +/* registers from being treated as empty. Documentation
updated accordingly.
related: #18983
closes: #19542
Signed-off-by: mikoto2000 <mikoto2000@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: cannot display tabs for indentation
Solution: Add the "leadtab" value to the 'listchars' option to
distinguish between tabs used for indentation and tabs used
for alignment (HarshK97).
closes: #19094
Signed-off-by: HarshK97 <harshkapse1234@gmail.com>
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: popup: redrawing can be improved when moving popups
Solution: When a pop-up window moves, only the target window should be
redrawn (Yasuhiro Matsumoto).
closes: #19536
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Coverity complains that ScreenLines can be NULL
(after v9.2.0080)
Solution: Remove null test
closes: #19538
CID: 1682067
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: test_client_server_stopinsert() is flaky.
Solution: Use remote_send() instead of remote_expr().
closes: #19539
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: There is a xkb syntax, but no filetype plugin.
Solution: Create a filetype plugin and set the comment and commentstring
options for the xkb filetype (xkb = X keyboard extension)
closes: #19537
Signed-off-by: GX <59413576+gx089@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Cannot have a mutli-line statusline.
Solution: Add support for multi-line statusline
(Hirohito Higashi).
closes: #19123
Signed-off-by: Hirohito Higashi <h.east.727@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Patch v9.2.0052 was wrong
Solution: Revert it for now
Revert "patch 9.2.0052: Wayland: hiding lower half of command line in tiny vim"
This reverts commit b834c3f23b.
related: #19504
related: #19483
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When z= fails due to no word being found, 'spelllang' being
unset or a multiline visual selection, 'nospell' is not
restored.
Solution: Jump to where the user configured value of 'spell' is restored
instead of returning early (Luuk van Baal).
closes: #19525
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Popup windows leave ghost images when moved. Visual options
do not trigger a redraw when updated via popup_setoptions().
An empty borderhighlight list fails to clear existing
highlights.
Solution: Modify f_popup_move() in src/popupwin.c to save the old
position before moving and force a redraw. Enhance
f_popup_setoptions() to trigger a redraw when
visual-affecting options change. Modify
apply_general_options() to explicitly clear border
highlights when an empty list is provided
(Yasuhiro Matsumoto).
closes: #19297
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Attempt to match all variations of group name and comma separator across
continuation lines.
Fixes issues:
- #18491 (Two ")"s are incorrectly colored 'vimOperError' in
syntax/mail.vim), reported by @lkintact
- #19366 (highlight error for contains elements in a new line), reported
by Maxim Kim
fixes: #18491fixes: #19366
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: memory leak in eval_dict()
Solution: Do not return but goto failret (Huihui Huang).
closes: #19531
Signed-off-by: Huihui Huang <625173@qq.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: A stack-buffer-overflow occurs when rendering a statusline
with a multi-byte fill character on a very wide terminal.
The size check in build_stl_str_hl() uses the cell width
rather than the byte length, allowing the subsequent fill
loop to write beyond the 4096-byte MAXPATHL buffer
(ehdgks0627, un3xploitable).
Solution: Update the size check to account for the byte length of
the fill character (using MB_CHAR2LEN).
Github Advisory:
https://github.com/vim/vim/security/advisories/GHSA-gmqx-prf2-8mwf
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: memline: a crafted swap files with bogus pe_page_count/pe_bnum
values could cause a multi-GB allocation via mf_get(), and
invalid pe_old_lnum/pe_line_count values could cause a SEGV
when passed to readfile() (ehdgks0627, un3xploitable)
Solution: Add bounds checks on pe_page_count and pe_bnum against
mf_blocknr_max before descending into the block tree, and
validate pe_old_lnum >= 1 and pe_line_count > 0 before calling
readfile().
Github Advisory:
https://github.com/vim/vim/security/advisories/GHSA-r2gw-2x48-jj5p
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When processing terminal output with many combining characters
from supplementary planes (4-byte UTF-8), a heap-buffer
overflow occurs. Additionally, the loop iterating over
cell characters can read past the end of the vterm array
(ehdgks0627, un3xploitable).
Solution: Use VTERM_MAX_CHARS_PER_CELL * 4 for ga_grow() to ensure
sufficient space. Add a boundary check to the character
loop to prevent index out-of-bounds access.
Github Advisory:
https://github.com/vim/vim/security/advisories/GHSA-rvj2-jrf9-2phg
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When parsing a malformed Emacs-style tags file, a 1-byte
heap-buffer-underflow read occurs if the 0x7f delimiter
appears at the very beginning of a line. This happens
because the code attempts to scan backward for a tag
name from the delimiter without checking if space exists.
(ehdgks0627, un3xploitable)
Solution: Add a check to ensure the delimiter (p_7f) is not at the
start of the buffer (lbuf) before attempting to isolate
the tag name.
GitHub Advisory:
https://github.com/vim/vim/security/advisories/GHSA-xcc8-r6c5-hvwv
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: Insufficient validation of hostname and port in
netrw URIs allows command injection via shell metacharacters
(ehdgks0627, un3xploitable).
Solution: Implement stricter RFC1123 hostname and IP validation.
Use shellescape() for the provided hostname and port.
Github Advisory:
https://github.com/vim/vim/security/advisories/GHSA-m3xh-9434-g336
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: inside_block() always checks the flags of the top-most stack
entry instead of the current loop index.
Solution: Use the loop index 'i' to check all levels of the condition
stack (Weixie Cui).
closes: #19524
Signed-off-by: Weixie Cui <cuiweixie@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: various tests leave swapfiles around
Solution: close open buffers using :bw! instead of :close!
Signed-off-by: Christian Brabandt <cb@256bit.org>
Patch 9.2.0033 (#19260) introduced a dedicated `env` filetype for
.env files, which were previously detected as `sh`. This left env
files without `commentstring`, `comments`, or `formatoptions` since
no ftplugin was added alongside the new filetype.
Add runtime/ftplugin/env.vim to set these options, matching the
behavior that .env files had when they used the `sh` filetype.
closes: #19522
Signed-off-by: snelling-a <72226000+snelling-a@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: The length passed to add_attr_and_value for " ctermfont=" is
incorrect. In highlight_set_font(), sg_font_name is freed and
updated in two separate branches, leading to redundant code.
Solution: Correct the length parameter in hlg_add_or_update().
Refactor highlight_set_font() to update the font name string
only once after a successful change is detected.
closes: #19512
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Inefficient use of list_append_string()
Solution: Pass string length to list_append_string() where it is known
(John Marriott).
closes: #19491
Signed-off-by: John Marriott <basilisk@internode.on.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: memory leak in invoke_sync_listeners()
Solution: Free the recorded_changes on early return
(Huihui Huang).
closes: #19516
Signed-off-by: Huihui Huang <625173@qq.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: popup: opacity feature causes flickering
(after v9.2.0016)
Solution: Only skip the mask and enable the opacity context if
w_popup_blend is greater than 0 (Hirohito Higashi).
fixes: #19510
fixes: #19499closes: #19515
Signed-off-by: Hirohito Higashi <h.east.727@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: memory leak in type_name_list_or_dict()
Solution: Free the variable member_free on early returns (Huihui Huang).
closes: #19513
Signed-off-by: Huihui Huang <625173@qq.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Using the wrong field with DAP channel mode
(after v9.2.0060)
Solution: Use request_seq instead of seq when handing DAP response
(Foxe Chen).
closes: #19511
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Not possible to know when a session will be loaded.
Solution: Add the SessionLoadPre autocommand (Colin Kennedy).
fixes: #19084closes: #19306
Signed-off-by: Colin Kennedy <colinvfx@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: No support for the DAP channel mode
Solution: Add native channel support for the debug-adapter-protocol
(Foxe Chen)
closes: #19432
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Compile error in did_set_previewpopup() when quickfix
feature is not included (John Marriott, after v9.2.0051)
Solution: Add ifdef FEAT_QUICKFIX (John Marriott)
related: #18873
Signed-off-by: John Marriott <basilisk@internode.on.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: eval_addblob() is inefficient
Solution: Replace per-byte ga_append() loop with a single ga_grow() and
mch_memmove() for each source blob. This eliminates N grow
checks and function call overhead for blob concatenation
(Yasuhiro Matsumoto).
closes: #19494
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vims list concatenation is inefficient
Solution: Use a single allocation of len1 + len2 using
list_alloc_with_items() (Yasuhiro Matsumoto).
Replace list_copy() + list_extend() (N+1 individual mallocs) with a
single list_alloc_with_items(len1+len2) call. This reduces the number
of memory allocations from O(N) to O(1) for the list '+' operator.
closes: #19495
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Running gvim with a tiny build under a Wayland compositor
hides the bottom half of the command line
(dezza, after v9.1.1585).
Solution: When Wayland display protocol support is not compiled in
(HAVE_WAYLAND not defined), force the X11 GDK backend to avoid
display issues. This restores the gdk_set_allowed_backends("x11")
call that was removed by patch 9.1.1585, but only for builds
without Wayland support (e.g. tiny builds, see patch 9.1.1565)
(Hirohito Higashi)
fixes: #19483closes: #19504
Signed-off-by: Hirohito Higashi <h.east.727@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: The 'previewpopup' option lacks several customization values
that 'completepopup' supports, such as borders, shadows,
and UI handles.
Solution: Add support for "border", "borderhighlight", "close",
"resize", and "shadow" to 'previewpopup' (Arkissa)
closes: #18873
Signed-off-by: Arkissa <mrarkssac@gmail.com>
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: In gvim on Windows, a certain problem can occur when the
WM_SETFOCUS event sent after an external command is not
processed immediately.
Solution: After posting WM_SETFOCUS, run the message loop to process it
as quickly as possible (Muraoka Taro).
The problem is that Test_normal11_showcmd may fail when running the
test_normal.vim test. Investigation revealed that the trigger was an
external command executed in the previous test,
Test_mouse_shape_after_failed_change, when two tests were executed
consecutively. In gvim on Windows, a WM_SETFOCUS event will be sent
when an external command finishes executing. This WM_SETFOCUS event is
not processed immediately, but rather by redraw, which is expected to
update showcmd. Because it is queued in typebuf at this time,
clear_showcmd(), which expects typebuf to be empty, cannot update
showcmd.
Also added a test that simulates the above problem.
closes: #19167
Signed-off-by: Muraoka Taro <koron.kaoriya@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: typename() returns wrong type for lists/dicts/tuples
with shared references (Mao-Yining).
Solution: Reset CopyID after processing the item so it can be
re-inspected if encountered again via a different reference
(Hirohito Higashi).
fixes: #19490closes: #19492
Signed-off-by: Hirohito Higashi <h.east.727@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: MS-Windows: ConPTY not yet preferred
Solution: Mark ConPTY as stable starting with Windows 11 (build 22000).
Vim will now prefer ConPTY over winpty on these systems.
fixes: #19033closes: #19037
Signed-off-by: bennyyip <yebenmy@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Wayland: still performance issues
(lilydjwg, after v9.2.0010)
Solution: Revert another part of Patch v9.2.0010
(Christoffer Aasted)
Revert "perf(gtk-wayland): avoid early redraws; compositor does redraw"
fixes: #19471
fixes: #19481closes: #19482
Signed-off-by: Christoffer Aasted <dezzadk@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Generate once (and inline) all alphabetical mark names.
- Allocate all markable "setpos" lists in advance.
- Continue tolerating redundant "setpos" calls that reset
mark "`" for motions within a line or motions between
paired lines (i.e. the lines for which mark "`" is made
reciprocal) rather than making "getpos" calls that check
the position of mark "`" before conditionally changing it
with "setpos" since checking a mark position is slower
than setting it according to profiling samples.
- Observe sparing use of empty lines.
closes: #19476
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: crypt: Crash when reading an encrypted UTF-8 file.
This happens because readfile() does not account for leftover
conversion bytes (conv_restlen) when reallocating and moving
the buffer after decryption (smss2022).
Solution: Include conv_restlen in the offset calculations and memmove
operations within readfile() (Foxe Chen).
fixes: #19425closes: #19453
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Not always using GA_CONCAT_LITERAL with string literals.
(after: v9.2.0031)
Solution: Use the GA_CONCAT_LITERAL, instead of ga_concat_len.
(John Marriott)
closes: #19468
Signed-off-by: John Marriott <basilisk@internode.on.net>
Signed-off-by: Hirohito Higashi <h.east.727@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: In screen_line(), there is a potential integer underflow when
accessing ScreenAttrs[off_to - 1] if off_to is zero.
(Coverity CID 1681430, after v9.2.0017)
Solution: Add a check to ensure off_to > 0 before accessing the
previous attribute index.
related: #19272
closes: #19479
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Wayland: Not using Boolean type (after v9.2.0010)
Solution: Use bool type instead of int (Hirohito Higashi).
closes: #19473
Signed-off-by: Hirohito Higashi <h.east.727@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: netrw: need better tests for absolute paths
Solution: Use absolutepath(), instead of regex test (Miguel Barro).
closes: #19477
Signed-off-by: Guybrush <miguel.barro@live.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: syntax highlighting lost in popup with opacity lower than 100
(after v9.2.0017)
Solution: Before blending, combine the popup's window color attribute
with the character's own attribute using hl_combine_attr()
(Yasuhiro Matsumoto).
related: #19272
closes: #19478
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: sh filetype used for env files
Solution: Detect *.env and .env.* files as env filetype,
detect .envrc and .envrc.* as sh filetype,
include a simple env syntax script (DuckAfire)
Previously, .env files were handled by the shell syntax. While
functional, this limited the ability to support specific .env
implementations, such as CodeIgniter4 which allows dots in keys
(e.g., "foo.bar=0").
The new dedicated 'env' filetype and syntax script improves legibility
and prevents highlighting from breaking when encountering spaces.
Currently, the syntax does not support indentation; fields, variables,
and comments must start at the beginning of the line.
closes: #19260
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: DuckAfire <155199080+duckafire@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
The declaration 'SSLVHostSNIPolicy' has bee introduced in version 2.4.66.
closes: #19452
Signed-off-by: Michael Osipov <michael.osipov@innomotics.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: completion: hang with line completion and fuzzy (Jesse Pavel)
Solution: Only check the line number when wrapping around the file
(Hirohito Higashi).
fixes: #19434closes: #19443
Signed-off-by: Hirohito Higashi <h.east.727@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Inefficient use of ga_concat()
Solution: Use ga_concat_len() when the length is already known to avoid
use of strlen() (John Marriott).
closes: #19422
Co-authored-by: Hirohito Higashi <h.east.727@gmail.com>
Signed-off-by: John Marriott <basilisk@internode.on.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When 'autocomplete' fires before compl_leader is initialized,
the prefix filter is bypassed. This allows non-prefix matches
(e.g. from fuzzy omnifuncs) to be shown in the popup menu and
incorrectly preinserted.
Solution: In get_leader_for_startcol(), if compl_leader.string is NULL,
fall back to using compl_orig_text as a filter for matches
starting at or after the completion column (Hirohito Higashi).
When 'autocomplete' first fires, compl_leader is NULL because
ins_compl_start() has not set it yet. This caused the prefix filter in
ins_compl_build_pum(), find_next_completion_match() and
find_common_prefix() to be bypassed, allowing non-prefix fuzzy omnifunc
matches to appear in the PUM and be preinserted.
Extend get_leader_for_startcol() to fall back to compl_orig_text when
compl_leader.string is NULL: if the match's cpt source startcol is less
than compl_col the match includes pre-compl_col text, so return
&compl_leader (NULL string) to signal "pass through"; otherwise return
&compl_orig_text so callers filter by the original text. The compl_col
<= 0 guard is kept only for the prepend-text path to avoid it
interfering with the NULL-leader fallback when compl_col is zero.
With this change all callers of get_leader_for_startcol() automatically
receive the correct filter string without additional helpers.
Also update Test_autocomplete_trigger Test 9 to reflect the new
behavior: 'faberge' is no longer shown when completing 'foo' because
it does not start with the current prefix.
Add Test_autocomplete_preinsert_null_leader() to verify that only
prefix-matching candidates appear in the PUM and are preinserted.
fixes: #19328closes: #19447
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Hirohito Higashi <h.east.727@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: STRLEN() used for a string literal
Solution: Use STRLEN_LITERAL instead (Yasuhiro Matsumoto).
closes: #19450
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
The Progress syntax file gained `set expandtab` in 4c3f536f4 (updated
for version 7.0d01, 2006-04-11). The Progress language itself doesn't
distinguish between tabs and spaces for indentation, so this seems like
something that should be left to user preference; but the setting is
accompanied by the comment "The Progress editor doesn't cope with tabs
very well", so there may be reason to keep it.
However, using `set` means that any new buffers created after editing a
Progress file will also have `expandtab` turned on, which is likely
contrary to a user's expectations. We should use `setlocal` instead to
avoid this.
closes: #19458
Signed-off-by: Daniel Smith <daniel@rdnlsmith.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: matchadd() conceal may use unrelated syntax cchar.
Solution: Only use syntax cchar when syntax_flags has HL_CONCEAL
(zeertzjq).
closes: #19459
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: The ss_pending_cmds variable is visible globally
Solution: Make it static (Foxe Chen).
closes: #19461
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: less.sh can't read from stdin; it will try to read from a file named "-" instead (after 515da6ecdb).
Solution: Do not prepend "-" with "--" in the arguments list for vim.
The following were checked manually and worked as expected:
echo Test | less.sh
echo Test | less.sh -
less.sh some_file
less.sh --cmd some_file # vim will try to load "--cmd" and "some_file".
less.sh # script outputs "No input."
# All of the above repeated with the output piped to 'cat'.
closes: #19462
Signed-off-by: Shane Harper <shane@shaneharper.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Reading files with lines approaching MAXCOL length crashes
with segfault due to colnr_T overflow.
Solution: The split check 'linerest >= MAXCOL' fired too late because
linerest could grow by up to 'size' bytes before the next
check. Change threshold to 'linerest >= MAXCOL - size' to
ensure the line passed to ml_append() stays within colnr_T
range.
Note: supported by AI claude
fixes: #17935
closes: #18953
closes: #19332
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: ml_append_int() crashes when appending lines near MAXCOL
length due to signed integer overflow in space_needed
calculation.
Solution: Change 'space_needed' from int to long to handle the
'len + INDEX_SIZE' computation without overflow. Update
db_free comparison casts from (int) to (long) to match.
Note: supported by AI claude
related: #17935
related: #18953
related: #19332
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: In order to prevent a use-after-free, bt_quickfix() added a
call to buf_valid(), which slows it down, because Vim has to
loop through many buffers all the time (v9.0.1859)
Solution: Patch v9.0.2010 fixed a similar problem, so that the call to
buf_valid() is no longer required (zeertzjq)
fixes: #19169closes: #19183
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When ch_open() tries to connect to a hostname that resolves to
multiple addresses (e.g., both IPv6 and IPv4), it uses a
single waittime for all connection attempts. If the first IPv6
connection attempt times out, it consumes almost all of the
waittime, leaving insufficient time (often just 1ms) for the
IPv4 attempt to succeed. (reporter)
Solution: Implement a simplified version of Happy Eyeballs (RFC 8305) to
improve connection fallback behavior when IPv6 is unavailable
or slow (thinca).
Distribute the waittime across multiple addresses:
- First address: use up to 250ms (RFC 8305 Connection Attempt Delay) or
half of the total waittime, whichever is smaller
- Middle addresses: divide remaining time equally
- Last address: use all remaining time
This ensures that IPv4 fallback has sufficient time to succeed even when
IPv6 connection attempts fail or timeout.
closes: #19233
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
Signed-off-by: thinca <thinca@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Hard to configure Vim according to full XDG spec
Solution: Include the $VIMRUNTIME/xdg.vim script as an example.
(Andrey Butirsky).
closes: #19421
Co-authored-by: Christian Brabandt <cb@256bit.org>
Signed-off-by: Andrey Butirsky <butirsky@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
The input files with syntax test cases are never compiled or
interpreted on behalf of test runners, just read, and their
parts are rendered in accordance with syntax definitions for
associated languages, to be compared with previously vetted
renderings. Whether their arbitrary contents will be valid
programs, benign programs, etc., is left for test authors to
decide and verify in their own environments. As executable
and non-executable files equally qualify for testing and yet
executability is never exercised, and since maintaining
executable files turns out to be a short-lived exception
than common practice, let us persist in keeping syntax files
non-executable and enforce it with a CI check.
closes: #19433
Co-authored-by: Christian Brabandt <cb@256bit.org>
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: High cpu usage with Wayland compositor
(lilydjwg, after v9.2.0010).
Solution: Partly revert patch v9.2.0010 for now
(Christoffer Aasted)
fixes: #19448closes: #19451
Signed-off-by: Christoffer Aasted <dezzadk@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: popup: Popup windows do not support a transparency setting.
Solution: Add the "opacity" option to popup windows to support
transparency when using the GUI or 'termguicolors'
(Yasuhiro Matsumoto).
closes: #19272
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When a popup window's border overwrites part of a wide
character from another popup, the remaining half loses its
original attribute (background color) because it is reset to 0.
Solution: Modify screen_line(), screen_puts_len(), and screen_fill() to
preserve the existing ScreenAttrs value when clearing wide
character boundaries. Also ensure background data is refreshed
for transparent popup cells (Yasuhiro Matsumoto).
closes: #19299
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim gets confused by OSC handling, causing Vim to start in
search mode (Shane Harper, after v9.1.1703)
Solution: In handle_mapping(), check if we are handling OSC sequences
and if yes go straight to check_termcode() (Foxe Chen)
fixes: #19426closes: #19435
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Stop mentioning "home directory" in the rtp search locations 1. and 5.,
which is incorrect in case of XDG scheme. $MYVIMDIR is correct, so use
this instead.
closes: #19438
Signed-off-by: Andrey Butirsky <butirsky@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Unsafe string functions may lead to buffer overflows
Solution: Use vim_strncpy() instead of strpcy(), replace sprintf() by
vim_snprintf() (Yasuhiro Matsumoto)
closes: #19412
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: parallel make invocation may break Wayland header generation
Solution: Use single make target to generate Wayland protocol files.
(Jan Palus)
$(WAYLAND_SRC) contains up to 4 files which, given right timing and
parallelization level, can spawn 4 independent `make` processes during
parallel build. Each process generates same set of files intermittently
leading to inconsistent results. Instead use one common target each
source file depends on.
fixes: #19419closes: #19420
Signed-off-by: Jan Palus <jpalus@fastmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Build fails when wayland is not defined
(fjaell, after v9.2.0010)
Solution: Add ifdef GDK_WINDOWING_WAYLAND
(Christoffer Aasted)
fixes: #19429closes: #19428
Signed-off-by: Christoffer Aasted <chr.aasted@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Using the Wayland backend in GTK, rendering remains slow due
to per-line redraws, unnecessary Cairo push/pop groups, and
scroll operations that allocate new surfaces repeatedly.
Solution: Improve rendering performance (Christoffer Aasted).
This commit does the following:
- Add gui.is_wayland to detect Wayland backend
- Avoid blocking the input loop
- Skip early redraws; let the compositor handle full-screen redraws
- Use CAIRO_OPERATOR_SOURCE to overwrite instead of blend
- Reuse scroll source region for destination scroll region
- Optimize fast scroll-up
- Remove cairo_push_group/pop_group and cairo_clip in scroll path
to reduce allocations (~50MB saved on 4K fractional scale)
Since Wayland redraws the entire screen between updates (unlike X11),
further performance gains are possible by batching drawing in other code
paths, e.g.:
- message.c: batch lines to avoid scroll
- term.c: batch terminal redraws
These could be refactored later to deferred redraw with Wayland.
closes: #19062
Signed-off-by: Christoffer Aasted <dezzadk@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: the tests test_cindent_* functions were numbered
inconsistently, causing them to be executed in wrong order.
Solution: Rename the test_cindent functions with zero-padded numbers.
Signed-off-by: Christian Brabandt <cb@256bit.org>
- ':!' is not stable, so use system() to get more consistent behaviour.
- Only warns when using 'pwsh'.
- Remove trailing spaces.
closes: #19370
Co-Authored-by: @lxhillwind
Signed-off-by: Mao-Yining <mao.yining@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: MS-Windows: font size calculation may be wrong when font does
not specify a valid ascent value. (Char, after v9.1.2129)
Solution: Calculate ascent as a ratio of ascent to total font height
with a fallback if metrics are zero.
Fallback to default value when font does not specify ascent value.
As proposed in https://github.com/vim/vim/pull/19318#issuecomment-3864669253
related: #19318
closes: #19367
Signed-off-by: Char <peacech@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Comment lines which start like a label are recognized as a
label and indented based on that.
Solution: Check if the position is in a comment after recognizing a label
in cin_islabel (Anttoni Erkkilä)
closes: #19397
Signed-off-by: Anttoni Erkkilä <anttoni.erkkila@protonmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: powershell commands wrongly wrapped when executed
Solution: Use &{ ... } to wrap commands when powershell/pwsh is in use
(Peter Lustig).
Allow compound commands with 'system()' when 'shell' is 'pwsh'
When the 'shell' option was set to 'powershell' or 'pwsh' and the
'system()' vimscript function was called with an argument containing two
or more shell commands (delimited by ';' or '&'), the function would
always fail with 'E282'.
The cause of the error was that VIM would wrap the shell command string
with parentheses (to allow the entire output to be redirected to a
temporary file for capturing) before actually passing it to the
PowerShell process for execution.
Unlike the typical shell that uses parentheses to group commands (and
possibly spawn a subshell), PowerShell uses them to resolve a single
command (pipeline) to an expression. To group multiple commands with
PowerShell, you must instead wrap them with either the subexpression
operator '$(...)' or an immediately evaluated script block '& { ... }'.
The latter option may be more efficient since it does not buffer its
output like for the former one does.
closes: #19401
Signed-off-by: Peter Lustig <tiamatX18@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Coverity reports unreachable code, CID: 1681310
Solution: Drop the ternary checking for non-NULL of from_encoding_raw.
closes: #19402
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Makefile: dosrt target fails because of duplicate lang directories
Solution: Rename the parent lang/ directory to readme/
Signed-off-by: Christian Brabandt <cb@256bit.org>
Remove `nextgroup=shComment` from the `shEscape` syntax pattern.
This was causing `#` characters after escape sequences inside
double-quoted strings to be misinterpreted as comments, breaking
highlighting for the rest of the file.
Add a test case for escaped characters followed by # in double quotes.
fixes: #19053closes: #19414
Signed-off-by: Bozhidar Batsov <bozhidar@batsov.dev>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: str2specialbuf() can be improved
Solution: Optimize str2specialbuf function in message.c
(Yasuhiro Matsumoto)
closes: #19415
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: Test_popup_setbuf fails, because the dump file contains
a reference to Vim version 9.1 (after v9.2.0000)
Solution: Replace Version number by 9.1 always.
closes: #19406
Signed-off-by: Christian Brabandt <cb@256bit.org>
Effective use of 'formatprg' requires both an understanding of the
specific capabilities of the formatting tool and Vim's formatting
commands. This is overly burdensome for some users.
Rather than address each complaint on a filetype by filetype basis,
remove 'formatprg' settings from all ftplugins.
It is expected that formatter plugins will be available in the near
future as a better solution. See #17145 (Add "formatter" feature using
"compiler" as a template).
Note: 'formatprg' will be removed from older ftplugins after the release
of Vim 9.2. The setting was added to the go and gleam ftplugins during
the current development cycle and have not been included in a Vim
release.
See: #18650 (rust.vim: stop setting formatprg to rustfmt)
closes: #19108
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
The username/group/netgroup patterns used \l\+ which only matched
lowercase letters. Linux usernames commonly contain hyphens, digits,
and underscores (e.g. www-data, deploy01, test_user).
Update the pattern to \l[-a-z0-9_]* to allow matching the additional
characters "-_" and numbers.
fixes: #18963closes: #19396
Signed-off-by: Bozhidar Batsov <bozhidar@batsov.dev>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Use ellipses, matching the file's general style, rather than hard
truncation of overlength tail comments in examples.
closes: #19298
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Installing man pages does not change the placeholder file paths
Solution: Update the sed patterns in installman.sh
Additionally we remove the sed command to update the path to the ps Vim
files for those reasons:
- All the postscript files were moved to the print/ subdirectory in
Commit e37d50a
- the sed command was wrongly quoting $vimloc so would wrongly try to
search for the literal value $vimloc instead of using the expanded
value.
related: ce6fe84db2
closes: #19382
Signed-off-by: Julio B <julio.bacel@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Amend syntax highlighting to allow for ksh93 discipline function names
(e.g. 'foo.get()') and mksh's odd function naming idiosyncrasies
(shNamespaceOne was introduced to enforce stricter naming rules for
ksh93 namespaces).
- Remove 'bind' from ksh93 syntax (such a builtin has never been
implemented in ksh93).
- 'xgrep' is only available in ksh93v- as an alternative way to
invoke the builtin 'grep -X', so reflect that in the syntax
highlighting.
- Forbid bash-style 'function name() {' syntax when highlighting
ksh88 and ksh93 scripts.
- Fix bug causing ' ()' to be incorrectly validated in mksh scripts.
- Add the many ksh93/ksh2020 .sh.* variables to the list of special
variables.
- Amend iskeyword to allow '.' so that '.sh.tilde.get' and such are
valid function names/variable names. (For mksh functions starting
with odd characters like '%' and '@' this would probably have too
many bad side effects, so I've omitted such a change for that shell.)
- Add new syntax tests and regenerate syntax dump files
closes: #19383
Signed-off-by: Johnothan King <johnothanking@protonmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
We add new key exchange algorithms and new enums for PubkeyAuthOptions.
We also add new keywords from sshd_config.5 not present here and remove
keywords present here that are not present in the official
documentation, with the exception of those patched in by Debian and
Fedora, as well as ChallengeResponseAuthentication which is deprecated
but still functional.
closes: #19347
Signed-off-by: Fionn Fitzmaurice <git@fionn.computer>
Signed-off-by: Jakub Jelen <jakuje@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Dynamically set mark "`" to pair disparate lines and
initially set marks "`a", "`b", etc. for as many lines in
the difference part. Note that users are free to delete
or change any set alphabetic marks without it affecting
the dynamic updating of mark "`"; alphabetic marks only
serve to help with arriving at "summary" lines, e.g.
"`a````".
- Create a fold for the difference part (but defer to users
the closing of it) so that disparate lines that fit real
estate can be viewed at the same time, as an alternative
to the builtin "s" keystroke that swaps top and bottom
parts in place.
- Fold and mark lines with the "git difftool" extension too.
closes: #19380
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: `gf` in Vim script fails if multiple target files exist.
Solution: Use globpath() which returns an array.
In a Vim script, `gf` on `some#func()` will jump to `autoload/some.vim`.
In this case, if there are multiple `autoload/foo.vim`s in
'runtimepath', `globpath(&runtimepath, path)` will return multiple
paths, separated by newlines.
As a result, the second and subsequent paths will be executed as
commands in `autoload/vimgoto.vim:195`, causing an error.
This change fixes this issue by making the result of `globpath()` an
array.
closes: #19379
Signed-off-by: thinca <thinca@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
In particular, also mention the difference between the regex atom \k and
what Vim considers for a word character.
closes: #18688
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When garbage collection runs, the list of recorded buffer
changes may be incorrectly freed (Sainnhe Park).
Solution: In garbage_collect(), iterate through all buffers and call
set_ref_in_list() for b_recorded_changes to ensure the list
and its contents are marked as reachable (Paul Ollis).
fixes: #19300closes: #19375
Signed-off-by: Paul Ollis <paul@cleversheep.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When a popup window partially overlaps a wide character
it results in truncated or garbage display.
Solution: When a wide character is partially blocked by a popup, clear both
cells in the screen buffer to prevent garbage (Yasuhiro Matsumoto).
closes: #19271
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: MS-Windows: mouse scroll events not handled for popups
Solution: Do not return early (Mao-Yining)
Ensure mouse wheel events on popup windows are properly processed by
sending the corresponding key messages. Previously, early returns
prevented normal event flow, causing popup windows to ignore scroll
input.
fixes: #19353closes: #19369
Signed-off-by: Mao-Yining <mao.yining@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
The set_by_lua_block directive of the Lua module takes an additional
variable as an argument which currently breaks the detection of inline
Lua blocks. For example:
set_by_lua_block $myvar {
return tonumber(ngx.var.myothervar)-1
}
closes: #19362
Signed-off-by: Josef Schönberger <josef.schoenberger@tum.de>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Truncation when serializing libsodium encryption parameters.
Solution: Correctly cast to long long type (Yasuhiro Matsumoto).
fixes: #19248closes: #19357
Signed-off-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Change syntax file maintainer.
- Add Guile and Python command highlighting.
- Update command list to version 12.
- Add foldable regions for the commands 'define', 'if' and 'while'
multiline commands.
- Support documented partial command names.
- Add matchit, browsefilter, and comment formatting support.
- Support embedded C in compiler {code|print} commands.
- Add largely complete settings highlighting and folding.
- Add syntax tests (incomplete).
Thanks to Claudio Fleiner for many years of maintenance.
closes: #10649
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
This reverts commit 0fde6aebdd.
With "v9.1.2134" applied, arbitrary multibyte characters are
not replaced with spurious U+FFFD characters (typically when
the host system is under load); U+FFFD characters that are
intentionally written in an input file continue to remain
present for later output and comparison. The workaround of
"v9.1.1592~3" is no longer necessary.
Also prefer "page_nr" to "nr" in syntax/testdir/runtest.vim
closes: #19348
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
*os_mac.txt* For Vim version 9.1. Last change: 2025 Nov 09
*os_mac.txt* For Vim version 9.2. Last change: 2026 Feb 14
VIM REFERENCE MANUAL by Bram Moolenaar et al.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
